depends on PACKAGE_wpa-supplicant || \
PACKAGE_wpa-supplicant-openssl || \
PACKAGE_wpa-supplicant-wolfssl || \
- PACKAGE_wpa-supplicant-mesh || \
+ PACKAGE_wpa-supplicant-mesh-openssl || \
+ PACKAGE_wpa-supplicant-mesh-wolfssl || \
PACKAGE_wpa-supplicant-mini || \
+ PACKAGE_wpa-supplicant-p2p || \
PACKAGE_wpad || \
PACKAGE_wpad-openssl || \
PACKAGE_wpad-wolfssl || \
depends on PACKAGE_wpa-supplicant || \
PACKAGE_wpa-supplicant-openssl || \
PACKAGE_wpa-supplicant-wolfssl || \
- PACKAGE_wpa-supplicant-mesh || \
+ PACKAGE_wpa-supplicant-mesh-openssl || \
+ PACKAGE_wpa-supplicant-mesh-wolfssl || \
PACKAGE_wpa-supplicant-mini || \
+ PACKAGE_wpa-supplicant-p2p || \
PACKAGE_wpad || \
PACKAGE_wpad-openssl || \
PACKAGE_wpad-wolfssl || \
depends on PACKAGE_wpa-supplicant || \
PACKAGE_wpa-supplicant-openssl || \
PACKAGE_wpa-supplicant-wolfssl || \
- PACKAGE_wpa-supplicant-mesh || \
+ PACKAGE_wpa-supplicant-mesh-openssl || \
+ PACKAGE_wpa-supplicant-mesh-wolfssl || \
PACKAGE_wpa-supplicant-mini || \
+ PACKAGE_wpa-supplicant-p2p || \
PACKAGE_wpad || \
PACKAGE_wpad-openssl || \
PACKAGE_wpad-wolfssl || \
include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
-PKG_RELEASE:=2
+PKG_RELEASE:=3
PKG_SOURCE_URL:=http://w1.fi/hostap.git
PKG_SOURCE_PROTO:=git
CONFIG_DRIVER_11N_SUPPORT \
CONFIG_DRIVER_11AC_SUPPORT \
+WPAD_PROVIDERS:=wpad-mini wpad wpad-openssl wpad-wolfssl \
+ wpad-mesh-openssl wpad-mesh-wolfssl
+
+SUPPLICANT_ONLY_PROVIDERS:=wpa-supplicant-mini wpa-supplicant-p2p \
+ wpa-supplicant wpa-supplicant-openssl wpa-supplicant-wolfssl \
+ wpa-supplicant-mesh-openssl wpa-supplicant-mesh-wolfssl
+
+HOSTAPD_ONLY_PROVIDERS:=hostapd-mini hostapd hostapd-openssl hostapd-wolfssl
+
+EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
+
+SUPPLICANT_PROVIDERS:=$(WPAD_PROVIDERS) $(SUPPLICANT_ONLY_PROVIDERS)
+HOSTAPD_PROVIDERS:=$(WPAD_PROVIDERS) $(HOSTAPD_ONLY_PROVIDERS)
+ANY_SUPPLICANT_PROVIDERS:=$(WPAD_PROVIDERS) $(SUPPLICANT_ONLY_PROVIDERS)
+ANY_HOSTAPD_PROVIDERS:=$(WPAD_PROVIDERS) $(HOSTAPD_ONLY_PROVIDERS)
+ANY_PROVIDERS:=$(WPAD_PROVIDERS) $(SUPPLICANT_ONLY_PROVIDERS) $(HOSTAPD_ONLY_PROVIDERS)
+
LOCAL_TYPE=$(strip \
$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
$(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY)
-WPAD_PROVIDERS:=wpad-mini wpad wpad-openssl wpad-wolfssl \
- wpad-mesh-openssl wpad-mesh-wolfssl
-
-SUPPLICANT_ONLY_PROVIDERS:=wpa_supplicant-mini wpa_supplicant-p2p \
- wpa_supplicant wpa_supplicant-openssl wpa_supplicant-wolfssl \
- wpa_supplicant-mesh-openssl wpa_supplicant-mesh-wolfssl
-
-HOSTAPD_ONLY_PROVIDERS:=hostapd-mini hostapd hostapd-openssl hostapd-wolfssl
-
-EAPOL_TEST_PROVIDERS:=eapol-test eapol-test-openssl eapol-test-wolfssl
-
-SUPPLICANT_PROVIDERS:=$(WPAD_PROVIDERS) $(SUPPLICANT_ONLY_PROVIDERS)
-HOSTAPD_PROVIDERS:=$(WPAD_PROVIDERS) $(HOSTAPD_ONLY_PROVIDERS)
-ANY_PROVIDERS:=$(WPAD_PROVIDERS) $(HOSTAPD_ONLY_PROVIDERS) $(SUPPLICANT_ONLY_PROVIDERS)
ifneq ($(CONFIG_DRIVER_11N_SUPPORT),)
HOSTAPD_IEEE80211N:=y
define Package/hostapd-utils
$(call Package/hostapd/Default)
TITLE+= (utils)
- DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
+ DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(ANY_HOSTAPD_PROVIDERS),PACKAGE_$(pkg)))
endef
define Package/hostapd-utils/description
$(call Package/wpad/Default)
TITLE+= (full)
VARIANT:=wpad-full-internal
+ CONFLICTS:=$(filter-out wpad-mesh-wolfssl,\
+ $(filter-out wpad-mesh-openssl ,\
+ $(filter-out wpad-openssl ,\
+ $(filter-out wpad-wolfssl ,\
+ $(filter-out wpad-wolfssl ,\
+ $(filter-out wpad ,\
+ $(ANY_PROVIDERS)\
+ ))))))
endef
define Package/wpad-openssl
$(call Package/wpad/Default)
TITLE+= (WPA-PSK only)
VARIANT:=wpad-mini
+ CONFLICTS:=$(SUPPLICANT_ONLY_PROVIDERS)
endef
define Package/wpad-mini/description
define Package/wpa-supplicant
$(Package/wpa-supplicant/Default)
- CONFLICTS:=$(filter-out wpa-supplicant ,$(SUPPLICANT_ONLY_PROVIDERS))
VARIANT:=supplicant-full-internal
+ CONFLICTS:=wpa-supplicant-mini
endef
define Package/wpa-supplicant-openssl
$(Package/wpa-supplicant/Default)
- CONFLICTS:=$(filter-out wpa-supplicant-openssl ,$(SUPPLICANT_ONLY_PROVIDERS))
+ CONFLICTS:=$(filter-out wpa-supplicant-wolfssl ,\
+ $(filter-out wpa-supplicant-openssl ,\
+ $(filter-out wpa-supplicant-mesh-openssl ,\
+ $(filter-out wpa-supplicant-mesh-wolfssl ,\
+ $(SUPPLICANT_ONLY_PROVIDERS)\
+ ))))
VARIANT:=supplicant-full-openssl
DEPENDS+=+libopenssl
PROVIDES:=wpa-supplicant
define Package/wpa-supplicant-wolfssl
$(Package/wpa-supplicant/Default)
- CONFLICTS:=$(filter-out wpa-supplicant-wolfssl ,$(SUPPLICANT_ONLY_PROVIDERS))
+ CONFLICTS:=$(filter-out wpa-supplicant-wolfssl ,\
+ $(filter-out wpa-supplicant-openssl ,\
+ $(filter-out wpa-supplicant-mesh-openssl ,\
+ $(filter-out wpa-supplicant-mesh-wolfssl ,\
+ $(SUPPLICANT_ONLY_PROVIDERS)\
+ ))))
VARIANT:=supplicant-full-wolfssl
DEPENDS+=+libwolfssl
PROVIDES:=wpa-supplicant
$(Package/wpa-supplicant)
TITLE:=WPA Supplicant (with Wi-Fi P2P support)
DEPENDS:=$(DRV_DEPENDS) @PACKAGE_kmod-cfg80211
- CONFLICTS:=$(filter-out wpa-supplicant-p2p ,$(SUPPLICANT_ONLY_PROVIDERS))
+ CONFLICTS:=$(filter-out wpa-supplicant-openssl ,\
+ $(filter-out wpa-supplicant-wolfssl ,\
+ $(filter-out wpa-supplicant-p2p ,\
+ $(filter-out wpa-supplicant-mesh-openssl ,\
+ $(filter-out wpa-supplicant-mesh-wolfssl ,\
+ $(SUPPLICANT_ONLY_PROVIDERS)\
+ )))))
VARIANT:=supplicant-p2p-internal
PROVIDES:=wpa-supplicant
endef
define Package/wpa-supplicant-mesh/Default
- $(Package/wpa-supplicant)
+ $(Package/wpa-supplicant/Default)
TITLE:=WPA Supplicant (with 802.11s and SAE)
DEPENDS:=$(DRV_DEPENDS) @PACKAGE_kmod-cfg80211 @(!TARGET_uml||BROKEN)
PROVIDES:=wpa-supplicant wpa-supplicant-mesh
endef
define Package/wpa-supplicant-mini
- $(Package/wpa-supplicant)
+ $(Package/wpa-supplicant/Default)
TITLE:=WPA Supplicant (minimal version)
DEPENDS:=$(DRV_DEPENDS)
- CONFLICTS:=$(filter-out wpa-supplicant-mini ,$(SUPPLICANT_ONLY_PROVIDERS))
VARIANT:=supplicant-mini
PROVIDES:=wpa-supplicant
endef
define Package/wpa-cli
SECTION:=net
CATEGORY:=Network
- DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
+ DEPENDS:=@$(subst $(space),||,$(foreach pkg,$(ANY_SUPPLICANT_PROVIDERS),PACKAGE_$(pkg)))
TITLE:=WPA Supplicant command line control utility
endef
VARIANT:=supplicant-full-openssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(EAPOL_TEST_PROVIDERS))
DEPENDS:=$(DRV_DEPENDS) +libopenssl
+ PROVIDES:=eapol-test
endef
define Package/eapol-test-wolfssl
VARIANT:=supplicant-full-wolfssl
CONFLICTS:=$(filter-out eapol-test-openssl ,$(filter-out eapol-test-wolfssl ,$(EAPOL_TEST_PROVIDERS)))
DEPENDS:=$(DRV_DEPENDS) +libwolfssl
+ PROVIDES:=eapol-test
endef
+++ /dev/null
-From 8a6a7112e5b1391018531f6b6c317f8870e0fcb6 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 3 May 2018 13:12:28 +0200
-Subject: [PATCH 1/2] Revert "wpa_supplicant: Increase authentication timeout
- if CAC is started"
-
-This reverts commit 37547ad63c9df61ce6899675028594da2527efef.
----
- wpa_supplicant/events.c | 95 ++++---------------------------
- wpa_supplicant/wpa_supplicant.c | 20 -------
- wpa_supplicant/wpa_supplicant_i.h | 3 -
- 3 files changed, 10 insertions(+), 108 deletions(-)
-
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -3776,81 +3776,6 @@ static void wpa_supplicant_event_port_au
- }
-
-
--static unsigned int wpas_event_cac_ms(const struct wpa_supplicant *wpa_s,
-- int freq)
--{
-- size_t i;
-- int j;
--
-- for (i = 0; i < wpa_s->hw.num_modes; i++) {
-- const struct hostapd_hw_modes *mode = &wpa_s->hw.modes[i];
--
-- for (j = 0; j < mode->num_channels; j++) {
-- const struct hostapd_channel_data *chan;
--
-- chan = &mode->channels[j];
-- if (chan->freq == freq)
-- return chan->dfs_cac_ms;
-- }
-- }
--
-- return 0;
--}
--
--
--static void wpas_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
--{
--#if defined(NEED_AP_MLME) && defined(CONFIG_AP)
-- if (wpa_s->ap_iface) {
-- wpas_ap_event_dfs_cac_started(wpa_s, radar);
-- } else
--#endif /* NEED_AP_MLME && CONFIG_AP */
-- {
-- unsigned int cac_time = wpas_event_cac_ms(wpa_s, radar->freq);
--
-- cac_time /= 1000; /* convert from ms to sec */
-- if (!cac_time)
-- cac_time = 10 * 60; /* max timeout: 10 minutes */
--
-- /* Restart auth timeout: CAC time added to initial timeout */
-- wpas_auth_timeout_restart(wpa_s, cac_time);
-- }
--}
--
--
--static void wpas_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
--{
--#if defined(NEED_AP_MLME) && defined(CONFIG_AP)
-- if (wpa_s->ap_iface) {
-- wpas_ap_event_dfs_cac_finished(wpa_s, radar);
-- } else
--#endif /* NEED_AP_MLME && CONFIG_AP */
-- {
-- /* Restart auth timeout with original value after CAC is
-- * finished */
-- wpas_auth_timeout_restart(wpa_s, 0);
-- }
--}
--
--
--static void wpas_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
--{
--#if defined(NEED_AP_MLME) && defined(CONFIG_AP)
-- if (wpa_s->ap_iface) {
-- wpas_ap_event_dfs_cac_aborted(wpa_s, radar);
-- } else
--#endif /* NEED_AP_MLME && CONFIG_AP */
-- {
-- /* Restart auth timeout with original value after CAC is
-- * aborted */
-- wpas_auth_timeout_restart(wpa_s, 0);
-- }
--}
--
--
- static void wpa_supplicant_event_assoc_auth(struct wpa_supplicant *wpa_s,
- union wpa_event_data *data)
- {
-@@ -4298,25 +4223,25 @@ void wpa_supplicant_event(void *ctx, enu
- wpas_ap_event_dfs_radar_detected(wpa_s,
- &data->dfs_event);
- break;
-- case EVENT_DFS_NOP_FINISHED:
-- if (data)
-- wpas_ap_event_dfs_cac_nop_finished(wpa_s,
-- &data->dfs_event);
-- break;
--#endif /* NEED_AP_MLME */
--#endif /* CONFIG_AP */
- case EVENT_DFS_CAC_STARTED:
- if (data)
-- wpas_event_dfs_cac_started(wpa_s, &data->dfs_event);
-+ wpas_ap_event_dfs_cac_started(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_CAC_FINISHED:
- if (data)
-- wpas_event_dfs_cac_finished(wpa_s, &data->dfs_event);
-+ wpas_ap_event_dfs_cac_finished(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_CAC_ABORTED:
- if (data)
-- wpas_event_dfs_cac_aborted(wpa_s, &data->dfs_event);
-+ wpas_ap_event_dfs_cac_aborted(wpa_s, &data->dfs_event);
-+ break;
-+ case EVENT_DFS_NOP_FINISHED:
-+ if (data)
-+ wpas_ap_event_dfs_cac_nop_finished(wpa_s,
-+ &data->dfs_event);
- break;
-+#endif /* NEED_AP_MLME */
-+#endif /* CONFIG_AP */
- case EVENT_RX_MGMT: {
- u16 fc, stype;
- const struct ieee80211_mgmt *mgmt;
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -243,30 +243,10 @@ void wpa_supplicant_req_auth_timeout(str
- wpa_dbg(wpa_s, MSG_DEBUG, "Setting authentication timeout: %d sec "
- "%d usec", sec, usec);
- eloop_cancel_timeout(wpa_supplicant_timeout, wpa_s, NULL);
-- wpa_s->last_auth_timeout_sec = sec;
- eloop_register_timeout(sec, usec, wpa_supplicant_timeout, wpa_s, NULL);
- }
-
-
--/*
-- * wpas_auth_timeout_restart - Restart and change timeout for authentication
-- * @wpa_s: Pointer to wpa_supplicant data
-- * @sec_diff: difference in seconds applied to original timeout value
-- */
--void wpas_auth_timeout_restart(struct wpa_supplicant *wpa_s, int sec_diff)
--{
-- int new_sec = wpa_s->last_auth_timeout_sec + sec_diff;
--
-- if (eloop_is_timeout_registered(wpa_supplicant_timeout, wpa_s, NULL)) {
-- wpa_dbg(wpa_s, MSG_DEBUG,
-- "Authentication timeout restart: %d sec", new_sec);
-- eloop_cancel_timeout(wpa_supplicant_timeout, wpa_s, NULL);
-- eloop_register_timeout(new_sec, 0, wpa_supplicant_timeout,
-- wpa_s, NULL);
-- }
--}
--
--
- /**
- * wpa_supplicant_cancel_auth_timeout - Cancel authentication timeout
- * @wpa_s: Pointer to wpa_supplicant data
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -1182,8 +1182,6 @@ struct wpa_supplicant {
- /* RIC elements for FT protocol */
- struct wpabuf *ric_ies;
-
-- int last_auth_timeout_sec;
--
- #ifdef CONFIG_DPP
- struct dl_list dpp_bootstrap; /* struct dpp_bootstrap_info */
- struct dl_list dpp_configurator; /* struct dpp_configurator */
-@@ -1258,7 +1256,6 @@ void wpa_supplicant_initiate_eapol(struc
- void wpa_clear_keys(struct wpa_supplicant *wpa_s, const u8 *addr);
- void wpa_supplicant_req_auth_timeout(struct wpa_supplicant *wpa_s,
- int sec, int usec);
--void wpas_auth_timeout_restart(struct wpa_supplicant *wpa_s, int sec_diff);
- void wpa_supplicant_reinit_autoscan(struct wpa_supplicant *wpa_s);
- void wpa_supplicant_set_state(struct wpa_supplicant *wpa_s,
- enum wpa_states state);
+++ /dev/null
-From 0d4900ccd1c7ec5c5ffecf5040f9c07a6a32deef Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 3 May 2018 13:12:35 +0200
-Subject: [PATCH 2/2] Revert "wpa_supplicant: Rename wpas_event_*() to
- wpas_ap_event_*()"
-
-This reverts commit 2dd5fbbff884af488870a37e339b4817c83954de.
----
- wpa_supplicant/ap.c | 20 ++++++++++----------
- wpa_supplicant/ap.h | 18 +++++++++---------
- wpa_supplicant/events.c | 13 ++++++-------
- 3 files changed, 25 insertions(+), 26 deletions(-)
-
---- a/wpa_supplicant/ap.c
-+++ b/wpa_supplicant/ap.c
-@@ -1537,8 +1537,8 @@ int wpas_ap_pmksa_cache_add_external(str
-
-
- #ifdef NEED_AP_MLME
--void wpas_ap_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
-+void wpas_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar)
- {
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
-@@ -1550,8 +1550,8 @@ void wpas_ap_event_dfs_radar_detected(st
- }
-
-
--void wpas_ap_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
-+void wpas_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar)
- {
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
-@@ -1562,8 +1562,8 @@ void wpas_ap_event_dfs_cac_started(struc
- }
-
-
--void wpas_ap_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
-+void wpas_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar)
- {
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
-@@ -1574,8 +1574,8 @@ void wpas_ap_event_dfs_cac_finished(stru
- }
-
-
--void wpas_ap_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
-+void wpas_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar)
- {
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
-@@ -1586,8 +1586,8 @@ void wpas_ap_event_dfs_cac_aborted(struc
- }
-
-
--void wpas_ap_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar)
-+void wpas_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar)
- {
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
---- a/wpa_supplicant/ap.h
-+++ b/wpa_supplicant/ap.h
-@@ -89,16 +89,16 @@ int wpas_ap_pmksa_cache_list_mesh(struct
- char *buf, size_t len);
- int wpas_ap_pmksa_cache_add_external(struct wpa_supplicant *wpa_s, char *cmd);
-
--void wpas_ap_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar);
--void wpas_ap_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
-+void wpas_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar);
--void wpas_ap_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar);
--void wpas_ap_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar);
--void wpas_ap_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
-- struct dfs_event *radar);
-+void wpas_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar);
-+void wpas_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar);
-+void wpas_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar);
-+void wpas_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
-+ struct dfs_event *radar);
-
- void ap_periodic(struct wpa_supplicant *wpa_s);
-
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -4220,25 +4220,24 @@ void wpa_supplicant_event(void *ctx, enu
- #ifdef NEED_AP_MLME
- case EVENT_DFS_RADAR_DETECTED:
- if (data)
-- wpas_ap_event_dfs_radar_detected(wpa_s,
-- &data->dfs_event);
-+ wpas_event_dfs_radar_detected(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_CAC_STARTED:
- if (data)
-- wpas_ap_event_dfs_cac_started(wpa_s, &data->dfs_event);
-+ wpas_event_dfs_cac_started(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_CAC_FINISHED:
- if (data)
-- wpas_ap_event_dfs_cac_finished(wpa_s, &data->dfs_event);
-+ wpas_event_dfs_cac_finished(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_CAC_ABORTED:
- if (data)
-- wpas_ap_event_dfs_cac_aborted(wpa_s, &data->dfs_event);
-+ wpas_event_dfs_cac_aborted(wpa_s, &data->dfs_event);
- break;
- case EVENT_DFS_NOP_FINISHED:
- if (data)
-- wpas_ap_event_dfs_cac_nop_finished(wpa_s,
-- &data->dfs_event);
-+ wpas_event_dfs_cac_nop_finished(wpa_s,
-+ &data->dfs_event);
- break;
- #endif /* NEED_AP_MLME */
- #endif /* CONFIG_AP */
-From 032e70833de4b251fc4a159b2cc4ef28d0f1df0d Mon Sep 17 00:00:00 2001
+From 02ae4382f45f772e3630460459eb4e5af64e71b4 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:54:58 -0700
-Subject: [PATCH 01/16] mesh: factor out mesh join function
+Date: Tue, 29 May 2018 14:39:05 -0700
+Subject: [PATCH 01/18] mesh: factor out mesh join function
mesh join function consitss of 2 parts which are preparing
configurations and sending join event to driver.
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -363,13 +363,48 @@ void wpa_supplicant_mesh_add_scan_ie(str
+@@ -364,13 +364,48 @@ void wpa_supplicant_mesh_add_scan_ie(str
}
ret = -ENOENT;
goto out;
}
-@@ -380,22 +415,22 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -381,22 +416,22 @@ int wpa_supplicant_join_mesh(struct wpa_
wpa_s->group_cipher = WPA_CIPHER_NONE;
wpa_s->mgmt_group_cipher = 0;
} else {
ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
}
-@@ -409,67 +444,43 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -410,67 +445,43 @@ int wpa_supplicant_join_mesh(struct wpa_
}
}
if (ssid->beacon_int > 0)
-From 6da64b1e056e0b1be18b6ab37c820acb4a0f3cf4 Mon Sep 17 00:00:00 2001
+From 89db76eeff6502dfa39b011962ec9d560ed4c2ee Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:54:59 -0700
-Subject: [PATCH 02/16] mesh: factor out rsn initialization
+Date: Tue, 29 May 2018 14:39:06 -0700
+Subject: [PATCH 02/18] mesh: factor out rsn initialization
RSN initialization can be used in different phases
if mesh initialization and mesh join don't happen
int rate_len;
int frequency;
-@@ -291,38 +335,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -292,38 +336,8 @@ static int wpa_supplicant_mesh_init(stru
return -1;
}
-From 95425b5becaeda8a515c942f417696e5df34bbc8 Mon Sep 17 00:00:00 2001
+From 07bad5f256cbe8a4b45d32c5b43b870ee815fb42 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:00 -0700
-Subject: [PATCH 03/16] mesh: relocate RSN init function
+Date: Tue, 29 May 2018 14:39:07 -0700
+Subject: [PATCH 03/18] mesh: relocate RSN init function
RSN init function should work together with mesh join
when it's used. Since mesh join could be called at different stage
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -335,9 +335,6 @@ static int wpa_supplicant_mesh_init(stru
+@@ -336,9 +336,6 @@ static int wpa_supplicant_mesh_init(stru
return -1;
}
wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
return 0;
-@@ -383,6 +380,12 @@ void wpas_join_mesh(struct wpa_supplican
+@@ -384,6 +381,12 @@ void wpas_join_mesh(struct wpa_supplican
struct wpa_ssid *ssid = wpa_s->current_ssid;
int ret = 0;
-From 32044a7bb26858bedaf147c77f49f5cef1133de3 Mon Sep 17 00:00:00 2001
+From bd05de484bfa61def530d717c7234381f6b33cf7 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:01 -0700
-Subject: [PATCH 04/16] mesh: use setup completion callback to complete mesh
+Date: Tue, 29 May 2018 14:39:08 -0700
+Subject: [PATCH 04/18] mesh: use setup completion callback to complete mesh
join
mesh join function is the last function to be called during
ifmsh->drv_flags = wpa_s->drv_flags;
ifmsh->num_bss = 1;
ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
-@@ -233,6 +234,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -234,6 +235,8 @@ static int wpa_supplicant_mesh_init(stru
bss->drv_priv = wpa_s->drv_priv;
bss->iface = ifmsh;
bss->mesh_sta_free_cb = mesh_mpm_free_sta;
frequency = ssid->frequency;
if (frequency != freq->freq &&
frequency == freq->freq + freq->sec_channel_offset * 20) {
-@@ -374,8 +377,9 @@ void wpa_supplicant_mesh_add_scan_ie(str
+@@ -375,8 +378,9 @@ void wpa_supplicant_mesh_add_scan_ie(str
}
struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
struct wpa_ssid *ssid = wpa_s->current_ssid;
int ret = 0;
-@@ -497,7 +501,6 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -498,7 +502,6 @@ int wpa_supplicant_join_mesh(struct wpa_
goto out;
}
-From e2f13b1fac9799db83a37fc57df9471d9bb5b711 Mon Sep 17 00:00:00 2001
+From dbe9afab3b2dceb35d478ac43dfcf8fdc5e23a22 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:02 -0700
-Subject: [PATCH 05/16] mesh: reflect country setting to mesh configuration
+Date: Tue, 29 May 2018 14:39:09 -0700
+Subject: [PATCH 05/18] mesh: reflect country setting to mesh configuration
wpa_supplicant configuration has country parameter that is
supposed to be used in AP mode to indicate supporting 802.11h
is required to support 802.11h and 802.11d to use DFS channels.
Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+[daniel@makrotopia.org: adapted to changed ieee80211_is_dfs prototype]
---
- wpa_supplicant/mesh.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
+ wpa_supplicant/mesh.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -254,6 +254,15 @@ static int wpa_supplicant_mesh_init(stru
+@@ -255,6 +255,15 @@ static int wpa_supplicant_mesh_init(stru
bss->conf->start_disabled = 1;
bss->conf->mesh = MESH_ENABLED;
bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
-From 37bf08621eee53f30b464be71876c02e235077ba Mon Sep 17 00:00:00 2001
+From 51e759da5026b3e64f801135b5d53f2198bbd2f0 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:03 -0700
-Subject: [PATCH 06/16] mesh: inform kernel driver DFS handler in userspace
+Date: Tue, 29 May 2018 14:39:10 -0700
+Subject: [PATCH 06/18] mesh: inform kernel driver DFS handler in userspace
NL80211_ATTR_HANDLE_DFS is required by kerenel space
to enable DFS channels that indicates DFS handler
goto fail;
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -261,6 +261,7 @@ static int wpa_supplicant_mesh_init(stru
+@@ -262,6 +262,7 @@ static int wpa_supplicant_mesh_init(stru
conf->ieee80211d = 1;
conf->country[0] = wpa_s->conf->country[0];
conf->country[1] = wpa_s->conf->country[1];
-From 8190aab3344ae9746c897093f88f3679239d135d Mon Sep 17 00:00:00 2001
+From bdc77efe681d5b88f3256e2bb6e706d4eaf09518 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:04 -0700
-Subject: [PATCH 07/16] mesh: apply channel attributes before running Mesh
+Date: Tue, 29 May 2018 14:39:11 -0700
+Subject: [PATCH 07/18] mesh: apply channel attributes before running Mesh
This helps mesh interface initializes with correct
channel parameters.
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -337,6 +337,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -338,6 +338,8 @@ static int wpa_supplicant_mesh_init(stru
conf->basic_rates[rate_len] = -1;
}
if (hostapd_setup_interface(ifmsh)) {
wpa_printf(MSG_ERROR,
"Failed to initialize hostapd interface for mesh");
-@@ -348,8 +350,6 @@ static int wpa_supplicant_mesh_init(stru
+@@ -349,8 +351,6 @@ static int wpa_supplicant_mesh_init(stru
return -1;
}
-From e001251cb5708c406d477eca6aa912e5692b17fe Mon Sep 17 00:00:00 2001
+From eb9888ba41faaeb8fd07392ad46808b7d894cc14 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:05 -0700
-Subject: [PATCH 08/16] mesh: set interface type to mesh before setting
+Date: Tue, 29 May 2018 14:39:12 -0700
+Subject: [PATCH 08/18] mesh: set interface type to mesh before setting
interface
Correct interface type is required to start DFS CAC that can be
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -339,14 +339,14 @@ static int wpa_supplicant_mesh_init(stru
+@@ -340,14 +340,14 @@ static int wpa_supplicant_mesh_init(stru
wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
-From 3cefd0bf495ad51a860b56281a8cae32bc4bd086 Mon Sep 17 00:00:00 2001
+From fa3af966032267e618b19bbf06a536ddb81ddbdf Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:06 -0700
-Subject: [PATCH 09/16] mesh: set mesh center frequency
+Date: Tue, 29 May 2018 14:39:13 -0700
+Subject: [PATCH 09/18] mesh: set mesh center frequency
vht center frequency value is required to compose the correct channel info.
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -456,6 +456,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -457,6 +457,7 @@ int wpa_supplicant_join_mesh(struct wpa_
if (wpa_s->mesh_vht_enabled) {
ssid->vht = 1;
-From 90aa570a894a907d11f85ced43a248198e24acc1 Mon Sep 17 00:00:00 2001
+From 9a8ca54a264a2820af614043e7af853166b320b0 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:07 -0700
-Subject: [PATCH 10/16] mesh: consider mesh interface on dfs event handler
+Date: Tue, 29 May 2018 14:39:14 -0700
+Subject: [PATCH 10/18] mesh: consider mesh interface on dfs event handler
Once mesh starts supporting DFS channels, it has to handle DFS related events
from drivers, hence add mesh interface to the check list.
Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
---
wpa_supplicant/ap.c | 71 ++++++++++++++++++++++++++++++-----------
- wpa_supplicant/events.c | 1 +
- 2 files changed, 54 insertions(+), 18 deletions(-)
+ wpa_supplicant/events.c | 7 ++--
+ 2 files changed, 57 insertions(+), 21 deletions(-)
--- a/wpa_supplicant/ap.c
+++ b/wpa_supplicant/ap.c
}
@@ -1540,10 +1545,16 @@ int wpas_ap_pmksa_cache_add_external(str
- void wpas_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar)
+ void wpas_ap_event_dfs_radar_detected(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar)
{
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
radar->ht_enabled, radar->chan_offset,
radar->chan_width,
radar->cf1, radar->cf2);
-@@ -1553,10 +1564,16 @@ void wpas_event_dfs_radar_detected(struc
- void wpas_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar)
+@@ -1553,10 +1564,16 @@ void wpas_ap_event_dfs_radar_detected(st
+ void wpas_ap_event_dfs_cac_started(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar)
{
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
radar->ht_enabled, radar->chan_offset,
radar->chan_width, radar->cf1, radar->cf2);
}
-@@ -1565,10 +1582,16 @@ void wpas_event_dfs_cac_started(struct w
- void wpas_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar)
+@@ -1565,10 +1582,16 @@ void wpas_ap_event_dfs_cac_started(struc
+ void wpas_ap_event_dfs_cac_finished(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar)
{
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
radar->ht_enabled, radar->chan_offset,
radar->chan_width, radar->cf1, radar->cf2);
}
-@@ -1577,10 +1600,16 @@ void wpas_event_dfs_cac_finished(struct
- void wpas_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar)
+@@ -1577,10 +1600,16 @@ void wpas_ap_event_dfs_cac_finished(stru
+ void wpas_ap_event_dfs_cac_aborted(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar)
{
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
radar->ht_enabled, radar->chan_offset,
radar->chan_width, radar->cf1, radar->cf2);
}
-@@ -1589,10 +1618,16 @@ void wpas_event_dfs_cac_aborted(struct w
- void wpas_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
- struct dfs_event *radar)
+@@ -1589,10 +1618,16 @@ void wpas_ap_event_dfs_cac_aborted(struc
+ void wpas_ap_event_dfs_cac_nop_finished(struct wpa_supplicant *wpa_s,
+ struct dfs_event *radar)
{
- if (!wpa_s->ap_iface || !wpa_s->ap_iface->bss[0])
- return;
}
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
-@@ -4203,6 +4203,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -3802,7 +3802,7 @@ static void wpas_event_dfs_cac_started(s
+ struct dfs_event *radar)
+ {
+ #if defined(NEED_AP_MLME) && defined(CONFIG_AP)
+- if (wpa_s->ap_iface) {
++ if (wpa_s->ap_iface || wpa_s->ifmsh) {
+ wpas_ap_event_dfs_cac_started(wpa_s, radar);
+ } else
+ #endif /* NEED_AP_MLME && CONFIG_AP */
+@@ -3823,7 +3823,7 @@ static void wpas_event_dfs_cac_finished(
+ struct dfs_event *radar)
+ {
+ #if defined(NEED_AP_MLME) && defined(CONFIG_AP)
+- if (wpa_s->ap_iface) {
++ if (wpa_s->ap_iface || wpa_s->ifmsh) {
+ wpas_ap_event_dfs_cac_finished(wpa_s, radar);
+ } else
+ #endif /* NEED_AP_MLME && CONFIG_AP */
+@@ -3839,7 +3839,7 @@ static void wpas_event_dfs_cac_aborted(s
+ struct dfs_event *radar)
+ {
+ #if defined(NEED_AP_MLME) && defined(CONFIG_AP)
+- if (wpa_s->ap_iface) {
++ if (wpa_s->ap_iface || wpa_s->ifmsh) {
+ wpas_ap_event_dfs_cac_aborted(wpa_s, radar);
+ } else
+ #endif /* NEED_AP_MLME && CONFIG_AP */
+@@ -4278,6 +4278,7 @@ void wpa_supplicant_event(void *ctx, enu
#ifdef CONFIG_AP
if (wpa_s->current_ssid->mode == WPAS_MODE_AP ||
wpa_s->current_ssid->mode == WPAS_MODE_P2P_GO ||
-From ce3e491e445ebea9705e76ac7ee3d4841ace1cad Mon Sep 17 00:00:00 2001
+From bbaa6142eadf229334436fdbf51aa65bb819f771 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:08 -0700
-Subject: [PATCH 11/16] mesh: Allow DFS channels to be selected if dfs is
+Date: Tue, 29 May 2018 14:39:15 -0700
+Subject: [PATCH 11/18] mesh: Allow DFS channels to be selected if dfs is
enabled
Note: DFS is assumed to be usable if a country code has been set
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2033,6 +2033,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2060,6 +2060,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
struct hostapd_freq_params vht_freq;
int chwidth, seg0, seg1;
u32 vht_caps = 0;
freq->freq = ssid->frequency;
-@@ -2109,8 +2111,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2136,8 +2138,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
return;
/* Check primary channel flags */
#ifdef CONFIG_HT_OVERRIDES
if (ssid->disable_ht40)
-@@ -2136,8 +2141,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2163,8 +2168,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
return;
/* Check secondary channel flags */
freq->channel = pri_chan->chan;
-@@ -2227,8 +2235,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2254,8 +2262,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
return;
/* Back to HT configuration if channel not usable */
}
chwidth = VHT_CHANWIDTH_80MHZ;
-@@ -2248,10 +2259,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2275,10 +2286,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
if (!chan)
continue;
-From 912b5c89328f1f9585e64fd13460928c71f28352 Mon Sep 17 00:00:00 2001
+From 4a8245ec2e9d48e464488477a3e7ed234009c216 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:09 -0700
-Subject: [PATCH 12/16] mesh: allow mesh to send channel switch request
+Date: Tue, 29 May 2018 14:39:16 -0700
+Subject: [PATCH 12/18] mesh: allow mesh to send channel switch request
add mesh type to nl80211 channel switch request,
so mesh is able to send the request to kernel drivers.
-From d7ae7271dce4203bfcd79a230acb24f03f38633d Mon Sep 17 00:00:00 2001
+From 267395271c1a36b54ef21070acff2cadce241035 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:10 -0700
-Subject: [PATCH 13/16] mesh: do not allow pri/sec channel switch
+Date: Tue, 29 May 2018 14:39:17 -0700
+Subject: [PATCH 13/18] mesh: do not allow pri/sec channel switch
We don't want mesh to switch the channel from primary to secondary,
since mesh points are not able to join each other in that case.
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -336,7 +336,10 @@ static int wpa_supplicant_mesh_init(stru
+@@ -337,7 +337,10 @@ static int wpa_supplicant_mesh_init(stru
rate_len * sizeof(int));
conf->basic_rates[rate_len] = -1;
}
-From cf2ba81fb307f3e87e13896f9dbf93c0c2a9eb92 Mon Sep 17 00:00:00 2001
+From f95897cef614fff710c31d9e478eacc85d6312d5 Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:11 -0700
-Subject: [PATCH 14/16] mesh: do not allow scan result to swap pri/sec
+Date: Tue, 29 May 2018 14:39:18 -0700
+Subject: [PATCH 14/18] mesh: do not allow scan result to swap pri/sec
Swapping between primary and secondary channel will break
mesh from joining, hence don't allow it.
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2158,7 +2158,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2185,7 +2185,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
}
freq->sec_channel_offset = ht40;
-From 48f31256ffebfc43d6b14b93597aa2c7e2975dc4 Mon Sep 17 00:00:00 2001
+From 9423e8be0393e82c8622806a0529e47fd5583c0b Mon Sep 17 00:00:00 2001
From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Tue, 17 Apr 2018 21:55:12 -0700
-Subject: [PATCH 15/16] mesh: do not use offchan mgmt tx on DFS
+Date: Tue, 29 May 2018 14:39:19 -0700
+Subject: [PATCH 15/18] mesh: do not use offchan mgmt tx on DFS
Drivers don't allow mesh to use offchannel on management Tx.
Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+[daniel@makrotopia.org: adapted to changed ieee80211_is_dfs prototype]
---
- src/drivers/driver_nl80211.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
+ src/drivers/driver_nl80211.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
struct ieee80211_hdr *hdr;
wpa_printf(MSG_DEBUG, "nl80211: Send Action frame (ifindex=%d, "
-@@ -7190,6 +7194,12 @@ static int wpa_driver_nl80211_send_actio
+@@ -7189,7 +7193,11 @@ static int wpa_driver_nl80211_send_actio
+ } else {
os_memset(bss->rand_addr, 0, ETH_ALEN);
}
-
+-
+ if (is_mesh_interface(drv->nlmode) &&
+ (modes = nl80211_get_hw_feature_data(bss, &num_modes, &flags,
+ &dfs_domain)) &&
+ ieee80211_is_dfs(freq, modes, num_modes))
+ offchanok = 0;
-+
if (is_ap_interface(drv->nlmode) &&
(!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
(int) freq == bss->freq || drv->device_ap_sme ||
-@@ -7201,7 +7211,7 @@ static int wpa_driver_nl80211_send_actio
+@@ -7201,7 +7209,7 @@ static int wpa_driver_nl80211_send_actio
ret = nl80211_send_frame_cmd(bss, freq, wait_time, buf,
24 + data_len,
&drv->send_action_cookie,
--- /dev/null
+From fa9d565fe8841b288f29137c23a7ab2584dd9510 Mon Sep 17 00:00:00 2001
+From: Peter Oh <peter.oh@bowerswilkins.com>
+Date: Tue, 29 May 2018 14:39:20 -0700
+Subject: [PATCH 16/18] mesh: fix channel switch error during CAC
+
+Mesh interface has used its channel parameters that configured
+during its initialization even after channel switched due to
+DFS radar detection during CAC which caused channel switch error.
+This change fixes the error by updating its channel parameters
+when channel's been changed from initial one.
+
+Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+[daniel@makrotopia.org: added hw_features_common.h include]
+---
+ wpa_supplicant/mesh.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -11,6 +11,7 @@
+ #include "utils/common.h"
+ #include "utils/eloop.h"
+ #include "utils/uuid.h"
++#include "common/hw_features_common.h"
+ #include "common/ieee802_11_defs.h"
+ #include "common/wpa_ctrl.h"
+ #include "ap/sta_info.h"
+@@ -394,10 +395,35 @@ void wpa_supplicant_mesh_add_scan_ie(str
+ void wpas_mesh_complete_cb(void *ctx)
+ {
+ struct wpa_supplicant *wpa_s = (struct wpa_supplicant *)ctx;
++ struct hostapd_iface *ifmsh = wpa_s->ifmsh;
+ struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
+ struct wpa_ssid *ssid = wpa_s->current_ssid;
+ int ret = 0;
+
++ /*
++ * inspect if channel's been changed since initialized.
++ * i.e. DFS radar detection
++ */
++ if (ifmsh->freq != params->freq.freq) {
++ wpa_s->assoc_freq = ifmsh->freq;
++ ssid->frequency = ifmsh->freq;
++ if (hostapd_set_freq_params(¶ms->freq,
++ ifmsh->conf->hw_mode,
++ ifmsh->freq,
++ ifmsh->conf->channel,
++ ifmsh->conf->ieee80211n,
++ ifmsh->conf->ieee80211ac,
++ ifmsh->conf->secondary_channel,
++ ifmsh->conf->vht_oper_chwidth,
++ ifmsh->conf->vht_oper_centr_freq_seg0_idx,
++ ifmsh->conf->vht_oper_centr_freq_seg1_idx,
++ ifmsh->conf->vht_capab)) {
++ wpa_printf(MSG_ERROR, "Error updating mesh frequency params.");
++ wpa_supplicant_mesh_deinit(wpa_s);
++ return;
++ }
++ }
++
+ if (wpas_mesh_init_rsn(wpa_s)) {
+ wpa_printf(MSG_ERROR, "Init RSN failed. Deinit mesh...");
+ wpa_supplicant_mesh_deinit(wpa_s);
+++ /dev/null
-From 9a01d7f21bd33725dc33325a437c3cc4185ee8bd Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Apr 2018 19:24:31 +0200
-Subject: [PATCH 16/16] mesh: make forwarding configurable
-
-Allow mesh_fwding to be specified in a mesh bss config, pass that
-to the driver (only nl80211 implemented for now) and announce
-forwarding capability accordingly.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- src/ap/ap_config.h | 2 ++
- src/drivers/driver.h | 2 ++
- src/drivers/driver_nl80211.c | 3 +++
- wpa_supplicant/config.c | 4 ++++
- wpa_supplicant/config.h | 9 +++++++++
- wpa_supplicant/config_file.c | 4 ++++
- wpa_supplicant/config_ssid.h | 5 +++++
- wpa_supplicant/mesh.c | 6 ++++++
- wpa_supplicant/mesh_mpm.c | 4 ++--
- wpa_supplicant/wpa_supplicant.conf | 3 +++
- 10 files changed, 40 insertions(+), 2 deletions(-)
-
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -49,6 +49,7 @@ struct mesh_conf {
- int dot11MeshRetryTimeout; /* msec */
- int dot11MeshConfirmTimeout; /* msec */
- int dot11MeshHoldingTimeout; /* msec */
-+ int mesh_fwding;
- };
-
- #define MAX_STA_COUNT 2007
-@@ -618,6 +619,7 @@ struct hostapd_bss_config {
-
- #define MESH_ENABLED BIT(0)
- int mesh;
-+ int mesh_fwding;
-
- u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1363,6 +1363,7 @@ struct wpa_driver_mesh_bss_params {
- #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
- #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008
- #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010
-+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020
- /*
- * TODO: Other mesh configuration parameters would go here.
- * See NL80211_MESHCONF_* for all the mesh config parameters.
-@@ -1372,6 +1373,7 @@ struct wpa_driver_mesh_bss_params {
- int peer_link_timeout;
- int max_peer_links;
- int rssi_threshold;
-+ int forwarding;
- u16 ht_opmode;
- };
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -9230,6 +9230,9 @@ static int nl80211_put_mesh_config(struc
- if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- params->auto_plinks)) ||
-+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
-+ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
-+ params->forwarding)) ||
- ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
- nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- params->max_peer_links)) ||
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -2211,6 +2211,7 @@ static const struct parse_data ssid_fiel
- #ifdef CONFIG_MESH
- { INT_RANGE(mode, 0, 5) },
- { INT_RANGE(no_auto_peer, 0, 1) },
-+ { INT_RANGE(mesh_fwding, 0, 1) },
- { INT_RANGE(mesh_rssi_threshold, -255, 1) },
- #else /* CONFIG_MESH */
- { INT_RANGE(mode, 0, 4) },
-@@ -2761,6 +2762,7 @@ void wpa_config_set_network_defaults(str
- ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
- ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
- ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
-+ ssid->mesh_fwding = DEFAULT_MESH_FWDING;
- ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
- #endif /* CONFIG_MESH */
- #ifdef CONFIG_HT_OVERRIDES
-@@ -3976,6 +3978,7 @@ struct wpa_config * wpa_config_alloc_emp
- config->user_mpm = DEFAULT_USER_MPM;
- config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
- config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
-+ config->mesh_fwding = DEFAULT_MESH_FWDING;
- config->dot11RSNASAERetransPeriod =
- DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
- config->fast_reauth = DEFAULT_FAST_REAUTH;
-@@ -4598,6 +4601,7 @@ static const struct global_parse_data gl
- { INT(user_mpm), 0 },
- { INT_RANGE(max_peer_links, 0, 255), 0 },
- { INT(mesh_max_inactivity), 0 },
-+ { INT_RANGE(mesh_fwding, 0, 1), 0 },
- { INT(dot11RSNASAERetransPeriod), 0 },
- #endif /* CONFIG_MESH */
- { INT(disable_scan_offload), 0 },
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -18,6 +18,7 @@
- #define DEFAULT_USER_MPM 1
- #define DEFAULT_MAX_PEER_LINKS 99
- #define DEFAULT_MESH_MAX_INACTIVITY 300
-+#define DEFAULT_MESH_FWDING 1
- /*
- * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
- * but use 1000 ms in practice to avoid issues on low power CPUs.
-@@ -1306,6 +1307,14 @@ struct wpa_config {
- int mesh_max_inactivity;
-
- /**
-+ * mesh_fwding - Mesh network layer-2 forwarding
-+ *
-+ * This controls whether to enable layer-2 forwarding.
-+ * By default: 1: enabled
-+ */
-+ int mesh_fwding;
-+
-+ /**
- * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
- *
- * This timeout value is used in mesh STA to retransmit
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -817,6 +817,7 @@ static void wpa_config_write_network(FIL
- #endif /* IEEE8021X_EAPOL */
- INT(mode);
- INT(no_auto_peer);
-+ INT(mesh_fwding);
- INT(frequency);
- INT(fixed_freq);
- #ifdef CONFIG_ACS
-@@ -1449,6 +1450,9 @@ static void wpa_config_write_global(FILE
- fprintf(f, "mesh_max_inactivity=%d\n",
- config->mesh_max_inactivity);
-
-+ if (config->mesh_fwding != DEFAULT_MESH_FWDING)
-+ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
-+
- if (config->dot11RSNASAERetransPeriod !=
- DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
- fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -492,6 +492,11 @@ struct wpa_ssid {
- int dot11MeshConfirmTimeout; /* msec */
- int dot11MeshHoldingTimeout; /* msec */
-
-+ /**
-+ * Mesh network layer-2 forwarding
-+ */
-+ int mesh_fwding;
-+
- int ht;
- int ht40;
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -120,6 +120,7 @@ static struct mesh_conf * mesh_config_cr
- conf->mesh_cc_id = 0;
- conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
- conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
-+ conf->mesh_fwding = ssid->mesh_fwding;
- conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
- conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
- conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
-@@ -254,6 +255,7 @@ static int wpa_supplicant_mesh_init(stru
- bss->conf->start_disabled = 1;
- bss->conf->mesh = MESH_ENABLED;
- bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
-+ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
-
- if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
- wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
-@@ -507,6 +509,10 @@ int wpa_supplicant_join_mesh(struct wpa_
- }
- params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
-
-+ /* always explicitely set forwarding to on or off for now */
-+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
-+ params->conf.forwarding = ssid->mesh_fwding;
-+
- wpa_s->mesh_params = params;
- if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) {
- wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
---- a/wpa_supplicant/mesh_mpm.c
-+++ b/wpa_supplicant/mesh_mpm.c
-@@ -288,9 +288,9 @@ static void mesh_mpm_send_plink_action(s
- info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
- /* TODO: Add Connected to Mesh Gate/AS subfields */
- wpabuf_put_u8(buf, info);
-- /* always forwarding & accepting plinks for now */
-+ /* set forwarding & always accepting plinks for now */
- wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
-- MESH_CAP_FORWARDING);
-+ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
- } else { /* Peer closing frame */
- /* IE: Mesh ID */
- wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -153,6 +153,9 @@ ap_scan=1
- # This timeout value is used in mesh STA to clean up inactive stations.
- #mesh_max_inactivity=300
-
-+# Enable 802.11s layer-2 routing and forwarding
-+#mesh_fwding=1
-+
- # cert_in_cb - Whether to include a peer certificate dump in events
- # This controls whether peer certificates for authentication server and
- # its certificate chain are included in EAP peer certificate events. This is
--- /dev/null
+From d3201adfe7d2219217a07ef16ef365ad59c1a89b Mon Sep 17 00:00:00 2001
+From: Peter Oh <peter.oh@bowerswilkins.com>
+Date: Tue, 29 May 2018 14:39:21 -0700
+Subject: [PATCH 17/18] mesh: use right interface context to send DFS event
+ messages
+
+use mesh interface context to send DFS event messages when
+DFS events are on mesh interface.
+
+Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
+Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
+---
+ src/ap/dfs.c | 27 +++++++++++++++++++--------
+ 1 file changed, 19 insertions(+), 8 deletions(-)
+
+--- a/src/ap/dfs.c
++++ b/src/ap/dfs.c
+@@ -637,6 +637,17 @@ static unsigned int dfs_get_cac_time(str
+ }
+
+
++static void *get_message_ctx(struct hostapd_iface *iface)
++{
++#ifdef CONFIG_MESH
++ if (iface->mconf)
++ return iface->owner;
++#endif /* CONFIG_MESH */
++
++ return iface->bss[0]->msg_ctx;
++}
++
++
+ /*
+ * Main DFS handler
+ * 1 - continue channel/ap setup
+@@ -719,7 +730,7 @@ int hostapd_handle_dfs(struct hostapd_if
+ /* Finally start CAC */
+ hostapd_set_state(iface, HAPD_IFACE_DFS);
+ wpa_printf(MSG_DEBUG, "DFS start CAC on %d MHz", iface->freq);
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_CAC_START
+ "freq=%d chan=%d sec_chan=%d, width=%d, seg0=%d, seg1=%d, cac_time=%ds",
+ iface->freq,
+ iface->conf->channel, iface->conf->secondary_channel,
+@@ -768,7 +779,7 @@ int hostapd_dfs_complete_cac(struct host
+ int ht_enabled, int chan_offset, int chan_width,
+ int cf1, int cf2)
+ {
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_COMPLETED
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_CAC_COMPLETED
+ "success=%d freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
+ success, freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
+
+@@ -810,7 +821,7 @@ int hostapd_dfs_pre_cac_expired(struct h
+ int ht_enabled, int chan_offset, int chan_width,
+ int cf1, int cf2)
+ {
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_PRE_CAC_EXPIRED
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_PRE_CAC_EXPIRED
+ "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
+ freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
+
+@@ -848,7 +859,7 @@ static int hostapd_dfs_start_channel_swi
+
+ wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
+ channel->chan);
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_NEW_CHANNEL
+ "freq=%d chan=%d sec_chan=%d", channel->freq,
+ channel->chan, secondary_channel);
+
+@@ -935,7 +946,7 @@ static int hostapd_dfs_start_channel_swi
+
+ wpa_printf(MSG_DEBUG, "DFS will switch to a new channel %d",
+ channel->chan);
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NEW_CHANNEL
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_NEW_CHANNEL
+ "freq=%d chan=%d sec_chan=%d", channel->freq,
+ channel->chan, secondary_channel);
+
+@@ -997,7 +1008,7 @@ int hostapd_dfs_radar_detected(struct ho
+ {
+ int res;
+
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_RADAR_DETECTED
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_RADAR_DETECTED
+ "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
+ freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
+
+@@ -1028,7 +1039,7 @@ int hostapd_dfs_nop_finished(struct host
+ int ht_enabled, int chan_offset, int chan_width,
+ int cf1, int cf2)
+ {
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_NOP_FINISHED
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_NOP_FINISHED
+ "freq=%d ht_enabled=%d chan_offset=%d chan_width=%d cf1=%d cf2=%d",
+ freq, ht_enabled, chan_offset, chan_width, cf1, cf2);
+
+@@ -1078,7 +1089,7 @@ int hostapd_dfs_start_cac(struct hostapd
+ int ht_enabled, int chan_offset, int chan_width,
+ int cf1, int cf2)
+ {
+- wpa_msg(iface->bss[0]->msg_ctx, MSG_INFO, DFS_EVENT_CAC_START
++ wpa_msg(get_message_ctx(iface), MSG_INFO, DFS_EVENT_CAC_START
+ "freq=%d chan=%d chan_offset=%d width=%d seg0=%d "
+ "seg1=%d cac_time=%ds",
+ freq, (freq - 5000) / 5, chan_offset, chan_width, cf1, cf2, 60);
--- /dev/null
+From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Wed, 18 Apr 2018 19:24:31 +0200
+Subject: [PATCH 18/18] mesh: make forwarding configurable
+
+Allow mesh_fwding to be specified in a mesh bss config, pass that
+to the driver (only nl80211 implemented for now) and announce
+forwarding capability accordingly.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ src/ap/ap_config.h | 2 ++
+ src/drivers/driver.h | 2 ++
+ src/drivers/driver_nl80211.c | 3 +++
+ wpa_supplicant/config.c | 4 ++++
+ wpa_supplicant/config.h | 9 +++++++++
+ wpa_supplicant/config_file.c | 4 ++++
+ wpa_supplicant/config_ssid.h | 5 +++++
+ wpa_supplicant/mesh.c | 6 ++++++
+ wpa_supplicant/mesh_mpm.c | 4 ++--
+ wpa_supplicant/wpa_supplicant.conf | 3 +++
+ 10 files changed, 40 insertions(+), 2 deletions(-)
+
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -49,6 +49,7 @@ struct mesh_conf {
+ int dot11MeshRetryTimeout; /* msec */
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
++ int mesh_fwding;
+ };
+
+ #define MAX_STA_COUNT 2007
+@@ -624,6 +625,7 @@ struct hostapd_bss_config {
+
+ #define MESH_ENABLED BIT(0)
+ int mesh;
++ int mesh_fwding;
+
+ u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
+
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -1363,6 +1363,7 @@ struct wpa_driver_mesh_bss_params {
+ #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
+ #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008
+ #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010
++#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020
+ /*
+ * TODO: Other mesh configuration parameters would go here.
+ * See NL80211_MESHCONF_* for all the mesh config parameters.
+@@ -1372,6 +1373,7 @@ struct wpa_driver_mesh_bss_params {
+ int peer_link_timeout;
+ int max_peer_links;
+ int rssi_threshold;
++ int forwarding;
+ u16 ht_opmode;
+ };
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -9228,6 +9228,9 @@ static int nl80211_put_mesh_config(struc
+ if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
+ nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ params->auto_plinks)) ||
++ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
++ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
++ params->forwarding)) ||
+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
+ nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ params->max_peer_links)) ||
+--- a/wpa_supplicant/config.c
++++ b/wpa_supplicant/config.c
+@@ -2212,6 +2212,7 @@ static const struct parse_data ssid_fiel
+ #ifdef CONFIG_MESH
+ { INT_RANGE(mode, 0, 5) },
+ { INT_RANGE(no_auto_peer, 0, 1) },
++ { INT_RANGE(mesh_fwding, 0, 1) },
+ { INT_RANGE(mesh_rssi_threshold, -255, 1) },
+ #else /* CONFIG_MESH */
+ { INT_RANGE(mode, 0, 4) },
+@@ -2763,6 +2764,7 @@ void wpa_config_set_network_defaults(str
+ ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
+ ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
+ ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
++ ssid->mesh_fwding = DEFAULT_MESH_FWDING;
+ ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
+ #endif /* CONFIG_MESH */
+ #ifdef CONFIG_HT_OVERRIDES
+@@ -3978,6 +3980,7 @@ struct wpa_config * wpa_config_alloc_emp
+ config->user_mpm = DEFAULT_USER_MPM;
+ config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
+ config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
++ config->mesh_fwding = DEFAULT_MESH_FWDING;
+ config->dot11RSNASAERetransPeriod =
+ DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
+ config->fast_reauth = DEFAULT_FAST_REAUTH;
+@@ -4600,6 +4603,7 @@ static const struct global_parse_data gl
+ { INT(user_mpm), 0 },
+ { INT_RANGE(max_peer_links, 0, 255), 0 },
+ { INT(mesh_max_inactivity), 0 },
++ { INT_RANGE(mesh_fwding, 0, 1), 0 },
+ { INT(dot11RSNASAERetransPeriod), 0 },
+ #endif /* CONFIG_MESH */
+ { INT(disable_scan_offload), 0 },
+--- a/wpa_supplicant/config.h
++++ b/wpa_supplicant/config.h
+@@ -18,6 +18,7 @@
+ #define DEFAULT_USER_MPM 1
+ #define DEFAULT_MAX_PEER_LINKS 99
+ #define DEFAULT_MESH_MAX_INACTIVITY 300
++#define DEFAULT_MESH_FWDING 1
+ /*
+ * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
+ * but use 1000 ms in practice to avoid issues on low power CPUs.
+@@ -1306,6 +1307,14 @@ struct wpa_config {
+ int mesh_max_inactivity;
+
+ /**
++ * mesh_fwding - Mesh network layer-2 forwarding
++ *
++ * This controls whether to enable layer-2 forwarding.
++ * By default: 1: enabled
++ */
++ int mesh_fwding;
++
++ /**
+ * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
+ *
+ * This timeout value is used in mesh STA to retransmit
+--- a/wpa_supplicant/config_file.c
++++ b/wpa_supplicant/config_file.c
+@@ -818,6 +818,7 @@ static void wpa_config_write_network(FIL
+ #endif /* IEEE8021X_EAPOL */
+ INT(mode);
+ INT(no_auto_peer);
++ INT(mesh_fwding);
+ INT(frequency);
+ INT(fixed_freq);
+ #ifdef CONFIG_ACS
+@@ -1450,6 +1451,9 @@ static void wpa_config_write_global(FILE
+ fprintf(f, "mesh_max_inactivity=%d\n",
+ config->mesh_max_inactivity);
+
++ if (config->mesh_fwding != DEFAULT_MESH_FWDING)
++ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
++
+ if (config->dot11RSNASAERetransPeriod !=
+ DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
+ fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
+--- a/wpa_supplicant/config_ssid.h
++++ b/wpa_supplicant/config_ssid.h
+@@ -500,6 +500,11 @@ struct wpa_ssid {
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
+
++ /**
++ * Mesh network layer-2 forwarding
++ */
++ int mesh_fwding;
++
+ int ht;
+ int ht40;
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -121,6 +121,7 @@ static struct mesh_conf * mesh_config_cr
+ conf->mesh_cc_id = 0;
+ conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
+ conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
++ conf->mesh_fwding = ssid->mesh_fwding;
+ conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
+ conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
+ conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
+@@ -256,6 +257,7 @@ static int wpa_supplicant_mesh_init(stru
+ bss->conf->start_disabled = 1;
+ bss->conf->mesh = MESH_ENABLED;
+ bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
++ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
+
+ if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
+ wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
+@@ -534,6 +536,10 @@ int wpa_supplicant_join_mesh(struct wpa_
+ }
+ params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
+
++ /* always explicitely set forwarding to on or off for now */
++ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
++ params->conf.forwarding = ssid->mesh_fwding;
++
+ wpa_s->mesh_params = params;
+ if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) {
+ wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
+--- a/wpa_supplicant/mesh_mpm.c
++++ b/wpa_supplicant/mesh_mpm.c
+@@ -288,9 +288,9 @@ static void mesh_mpm_send_plink_action(s
+ info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
+ /* TODO: Add Connected to Mesh Gate/AS subfields */
+ wpabuf_put_u8(buf, info);
+- /* always forwarding & accepting plinks for now */
++ /* set forwarding & always accepting plinks for now */
+ wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
+- MESH_CAP_FORWARDING);
++ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
+ } else { /* Peer closing frame */
+ /* IE: Mesh ID */
+ wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
+--- a/wpa_supplicant/wpa_supplicant.conf
++++ b/wpa_supplicant/wpa_supplicant.conf
+@@ -153,6 +153,9 @@ ap_scan=1
+ # This timeout value is used in mesh STA to clean up inactive stations.
+ #mesh_max_inactivity=300
+
++# Enable 802.11s layer-2 routing and forwarding
++#mesh_fwding=1
++
+ # cert_in_cb - Whether to include a peer certificate dump in events
+ # This controls whether peer certificates for authentication server and
+ # its certificate chain are included in EAP peer certificate events. This is
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -214,7 +214,7 @@ static int wpa_supplicant_mesh_init(stru
+@@ -215,7 +215,7 @@ static int wpa_supplicant_mesh_init(stru
return 0;
}
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
-@@ -2800,6 +2800,7 @@ void wpa_config_set_network_defaults(str
+@@ -2802,6 +2802,7 @@ void wpa_config_set_network_defaults(str
ssid->mka_priority = DEFAULT_PRIO_NOT_KEY_SERVER;
#endif /* CONFIG_MACSEC */
ssid->mac_addr = -1;
struct dl_list list;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2285,6 +2285,9 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2312,6 +2312,9 @@ void ibss_mesh_setup_freq(struct wpa_sup
vht_caps |= VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
seg0 = 114;
}
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2117,9 +2117,15 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2144,9 +2144,15 @@ void ibss_mesh_setup_freq(struct wpa_sup
if (!dfs_enabled)
return;
#endif /* CONFIG_HT_OVERRIDES */
/* Check/setup HT40+/HT40- */
-@@ -2147,8 +2153,6 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2174,8 +2180,6 @@ void ibss_mesh_setup_freq(struct wpa_sup
if (!dfs_enabled)
return;
if (ht40 == -1) {
if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
return;
-@@ -2192,6 +2196,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2219,6 +2223,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
wpa_scan_results_free(scan_res);
}
wpa_printf(MSG_DEBUG,
"IBSS/mesh: setup freq channel %d, sec_channel_offset %d",
freq->channel, freq->sec_channel_offset);
-@@ -2287,7 +2292,10 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2314,7 +2319,10 @@ void ibss_mesh_setup_freq(struct wpa_sup
}
} else if (ssid->max_oper_chwidth == VHT_CHANWIDTH_USE_HT) {
chwidth = VHT_CHANWIDTH_USE_HT;
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
-@@ -503,7 +503,7 @@ struct wpa_ssid {
+@@ -511,7 +511,7 @@ struct wpa_ssid {
int vht;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -272,9 +272,10 @@ void wpa_supplicant_cancel_auth_timeout(
+@@ -292,9 +292,10 @@ void wpa_supplicant_cancel_auth_timeout(
*/
void wpa_supplicant_initiate_eapol(struct wpa_supplicant *wpa_s)
{
os_memset(&global, 0, sizeof(global));
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
-@@ -3901,8 +3901,8 @@ static void wpas_event_assoc_reject(stru
+@@ -3976,8 +3976,8 @@ static void wpas_event_assoc_reject(stru
}
{
struct wpa_supplicant *wpa_s = ctx;
int resched;
-@@ -4669,7 +4669,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -4745,7 +4745,7 @@ void wpa_supplicant_event(void *ctx, enu
}
struct wpa_supplicant *wpa_s;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -5770,7 +5770,6 @@ struct wpa_interface * wpa_supplicant_ma
+@@ -5797,7 +5797,6 @@ struct wpa_interface * wpa_supplicant_ma
return NULL;
}
/**
* wpa_supplicant_match_existing - Match existing interfaces
* @global: Pointer to global data from wpa_supplicant_init()
-@@ -5807,6 +5806,11 @@ static int wpa_supplicant_match_existing
+@@ -5834,6 +5833,11 @@ static int wpa_supplicant_match_existing
#endif /* CONFIG_MATCH_IFACE */
/**
* wpa_supplicant_add_iface - Add a new network interface
-@@ -6063,6 +6067,8 @@ struct wpa_global * wpa_supplicant_init(
+@@ -6090,6 +6094,8 @@ struct wpa_global * wpa_supplicant_init(
#ifndef CONFIG_NO_WPA_MSG
wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
#endif /* CONFIG_NO_WPA_MSG */
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
-@@ -3159,6 +3159,10 @@ static int hostapd_config_fill(struct ho
+@@ -3214,6 +3214,10 @@ static int hostapd_config_fill(struct ho
}
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_IEEE80211N
} else if (os_strcmp(buf, "ht_capab") == 0) {
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
-@@ -769,6 +769,8 @@ struct hostapd_config {
+@@ -775,6 +775,8 @@ struct hostapd_config {
int ht_op_mode_fixed;
u16 ht_capab;
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
-@@ -2216,6 +2216,7 @@ static const struct parse_data ssid_fiel
+@@ -2217,6 +2217,7 @@ static const struct parse_data ssid_fiel
#else /* CONFIG_MESH */
{ INT_RANGE(mode, 0, 4) },
#endif /* CONFIG_MESH */
{ STR(id_str) },
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
-@@ -817,6 +817,7 @@ static void wpa_config_write_network(FIL
+@@ -818,6 +818,7 @@ static void wpa_config_write_network(FIL
#endif /* IEEE8021X_EAPOL */
INT(mode);
INT(no_auto_peer);
INT(fixed_freq);
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -286,6 +286,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -288,6 +288,8 @@ static int wpa_supplicant_mesh_init(stru
frequency);
goto out_free;
}
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2024,12 +2024,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2051,12 +2051,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
{
enum hostapd_hw_mode hw_mode;
struct hostapd_hw_modes *mode = NULL;
unsigned int j, k;
struct hostapd_freq_params vht_freq;
int chwidth, seg0, seg1;
-@@ -2099,7 +2099,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2126,7 +2126,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
return;
/* Setup higher BW only for 5 GHz */
for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
-@@ -848,6 +848,8 @@ struct wpa_ssid {
+@@ -856,6 +856,8 @@ struct wpa_ssid {
*/
int no_auto_peer;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -4221,7 +4221,7 @@ wpa_supplicant_alloc(struct wpa_supplica
+@@ -4248,7 +4248,7 @@ wpa_supplicant_alloc(struct wpa_supplica
if (wpa_s == NULL)
return NULL;
wpa_s->scan_req = INITIAL_SCAN_REQ;
nl80211_destroy_bss(bss);
if (!bss->added_if)
i802_set_iface_flags(bss, 0);
-@@ -7439,7 +7442,6 @@ static int wpa_driver_nl80211_deinit_ap(
+@@ -7437,7 +7440,6 @@ static int wpa_driver_nl80211_deinit_ap(
if (!is_ap_interface(drv->nlmode))
return -1;
wpa_driver_nl80211_del_beacon(bss);
/*
* If the P2P GO interface was dynamically added, then it is
-@@ -7459,7 +7461,6 @@ static int wpa_driver_nl80211_stop_ap(vo
+@@ -7457,7 +7459,6 @@ static int wpa_driver_nl80211_stop_ap(vo
if (!is_ap_interface(drv->nlmode))
return -1;
wpa_driver_nl80211_del_beacon(bss);
/* Configure default/group WEP keys for static WEP */
int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
{
-@@ -893,12 +942,16 @@ void wpa_supplicant_set_state(struct wpa
+@@ -913,12 +962,16 @@ void wpa_supplicant_set_state(struct wpa
sme_sched_obss_scan(wpa_s, 1);
wpa_s->new_connection = 1;
wpa_drv_set_operstate(wpa_s, 0);
#ifndef IEEE8021X_EAPOL
-@@ -1920,6 +1973,8 @@ void wpa_supplicant_associate(struct wpa
+@@ -1947,6 +2000,8 @@ void wpa_supplicant_associate(struct wpa
wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
ssid->id);
wpas_notify_mesh_group_started(wpa_s, ssid);
#else /* CONFIG_MESH */
wpa_msg(wpa_s, MSG_ERROR,
"mesh mode support not included in the build");
-@@ -5396,6 +5451,16 @@ static int wpa_supplicant_init_iface(str
+@@ -5423,6 +5478,16 @@ static int wpa_supplicant_init_iface(str
sizeof(wpa_s->bridge_ifname));
}
/* RSNA Supplicant Key Management - INITIALIZE */
eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
eapol_sm_notify_portValid(wpa_s->eapol, FALSE);
-@@ -5717,6 +5782,11 @@ static void wpa_supplicant_deinit_iface(
+@@ -5744,6 +5809,11 @@ static void wpa_supplicant_deinit_iface(
if (terminate)
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING);
/* Helper macros for network block parser */
#ifdef OFFSET
-@@ -2281,6 +2373,8 @@ static const struct parse_data ssid_fiel
+@@ -2282,6 +2374,8 @@ static const struct parse_data ssid_fiel
{ INT(ap_max_inactivity) },
{ INT(dtim_period) },
{ INT(beacon_int) },
#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
-@@ -749,6 +751,9 @@ struct wpa_ssid {
+@@ -757,6 +759,9 @@ struct wpa_ssid {
*/
void *parent_cred;
* macsec_policy - Determines the policy for MACsec secure session
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -3034,6 +3034,12 @@ static void wpas_start_assoc_cb(struct w
+@@ -3061,6 +3061,12 @@ static void wpas_start_assoc_cb(struct w
params.beacon_int = ssid->beacon_int;
else
params.beacon_int = wpa_s->conf->beacon_int;
/**
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -9250,6 +9250,18 @@ static int nl80211_put_mesh_id(struct nl
+@@ -9248,6 +9248,18 @@ static int nl80211_put_mesh_id(struct nl
}
static int nl80211_put_mesh_config(struct nl_msg *msg,
struct wpa_driver_mesh_bss_params *params)
{
-@@ -9311,6 +9323,7 @@ static int nl80211_join_mesh(struct i802
+@@ -9309,6 +9321,7 @@ static int nl80211_join_mesh(struct i802
nl80211_put_basic_rates(msg, params->basic_rates) ||
nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
nl80211_put_beacon_int(msg, params->beacon_int) ||
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -455,6 +455,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -482,6 +482,7 @@ int wpa_supplicant_join_mesh(struct wpa_
params->meshid = ssid->ssid;
params->meshid_len = ssid->ssid_len;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2097,11 +2097,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2124,11 +2124,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
for (j = 0; j < wpa_s->last_scan_res_used; j++) {
struct wpa_bss *bss = wpa_s->last_scan_res[j];
__func__, driver, drv_priv);
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
-@@ -1682,12 +1682,13 @@ ieee802_11_set_radius_info(struct hostap
+@@ -1712,12 +1712,13 @@ ieee802_11_set_radius_info(struct hostap
static void handle_auth(struct hostapd_data *hapd,
u16 fc;
const u8 *challenge = NULL;
u32 session_timeout, acct_interim_interval;
-@@ -1698,6 +1699,11 @@ static void handle_auth(struct hostapd_d
+@@ -1728,6 +1729,11 @@ static void handle_auth(struct hostapd_d
char *identity = NULL;
char *radius_cui = NULL;
u16 seq_ctrl;
if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
wpa_printf(MSG_INFO, "handle_auth - too short payload (len=%lu)",
-@@ -1858,6 +1864,13 @@ static void handle_auth(struct hostapd_d
+@@ -1888,6 +1894,13 @@ static void handle_auth(struct hostapd_d
resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
goto fail;
}
if (res == HOSTAPD_ACL_PENDING)
return;
-@@ -3137,12 +3150,12 @@ void fils_hlp_timeout(void *eloop_ctx, v
+@@ -3167,12 +3180,12 @@ void fils_hlp_timeout(void *eloop_ctx, v
static void handle_assoc(struct hostapd_data *hapd,
const struct ieee80211_mgmt *mgmt, size_t len,
struct sta_info *sta;
u8 *tmp = NULL;
struct hostapd_sta_wpa_psk_short *psk = NULL;
-@@ -3151,6 +3164,11 @@ static void handle_assoc(struct hostapd_
+@@ -3181,6 +3194,11 @@ static void handle_assoc(struct hostapd_
#ifdef CONFIG_FILS
int delay_assoc = 0;
#endif /* CONFIG_FILS */
if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_req) :
sizeof(mgmt->u.assoc_req))) {
-@@ -3322,6 +3340,14 @@ static void handle_assoc(struct hostapd_
+@@ -3352,6 +3370,14 @@ static void handle_assoc(struct hostapd_
}
#endif /* CONFIG_MBO */
/*
* sta->capability is used in check_assoc_ies() for RRM enabled
* capability element.
-@@ -3535,6 +3561,7 @@ static void handle_disassoc(struct hosta
+@@ -3565,6 +3591,7 @@ static void handle_disassoc(struct hosta
wpa_printf(MSG_DEBUG, "disassocation: STA=" MACSTR " reason_code=%d",
MAC2STR(mgmt->sa),
le_to_host16(mgmt->u.disassoc.reason_code));
sta = ap_get_sta(hapd, mgmt->sa);
if (sta == NULL) {
-@@ -3600,6 +3627,8 @@ static void handle_deauth(struct hostapd
+@@ -3630,6 +3657,8 @@ static void handle_deauth(struct hostapd
" reason_code=%d",
MAC2STR(mgmt->sa), le_to_host16(mgmt->u.deauth.reason_code));
sta = ap_get_sta(hapd, mgmt->sa);
if (sta == NULL) {
wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR " trying "
-@@ -3919,7 +3948,7 @@ int ieee802_11_mgmt(struct hostapd_data
+@@ -3949,7 +3978,7 @@ int ieee802_11_mgmt(struct hostapd_data
if (stype == WLAN_FC_STYPE_PROBE_REQ) {
return 1;
}
-@@ -3939,17 +3968,17 @@ int ieee802_11_mgmt(struct hostapd_data
+@@ -3969,17 +3998,17 @@ int ieee802_11_mgmt(struct hostapd_data
switch (stype) {
case WLAN_FC_STYPE_AUTH:
wpa_printf(MSG_DEBUG, "mgmt::auth");
projects / openwrt / staging / stintel.git / commitdiff