#include "sir-dev.h"
+
+static struct workqueue_struct *irda_sir_wq;
+
+/* STATE MACHINE */
+
+/* substate handler of the config-fsm to handle the cases where we want
+ * to wait for transmit completion before changing the port configuration
+ */
+
+static int sirdev_tx_complete_fsm(struct sir_dev *dev)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+ unsigned next_state, delay;
+ unsigned bytes_left;
+
+ do {
+ next_state = fsm->substate; /* default: stay in current substate */
+ delay = 0;
+
+ switch(fsm->substate) {
+
+ case SIRDEV_STATE_WAIT_XMIT:
+ if (dev->drv->chars_in_buffer)
+ bytes_left = dev->drv->chars_in_buffer(dev);
+ else
+ bytes_left = 0;
+ if (!bytes_left) {
+ next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
+ break;
+ }
+
+ if (dev->speed > 115200)
+ delay = (bytes_left*8*10000) / (dev->speed/100);
+ else if (dev->speed > 0)
+ delay = (bytes_left*10*10000) / (dev->speed/100);
+ else
+ delay = 0;
+ /* expected delay (usec) until remaining bytes are sent */
+ if (delay < 100) {
+ udelay(delay);
+ delay = 0;
+ break;
+ }
+ /* sleep some longer delay (msec) */
+ delay = (delay+999) / 1000;
+ break;
+
+ case SIRDEV_STATE_WAIT_UNTIL_SENT:
+ /* block until underlaying hardware buffer are empty */
+ if (dev->drv->wait_until_sent)
+ dev->drv->wait_until_sent(dev);
+ next_state = SIRDEV_STATE_TX_DONE;
+ break;
+
+ case SIRDEV_STATE_TX_DONE:
+ return 0;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ fsm->substate = next_state;
+ } while (delay == 0);
+ return delay;
+}
+
+/*
+ * Function sirdev_config_fsm
+ *
+ * State machine to handle the configuration of the device (and attached dongle, if any).
+ * This handler is scheduled for execution in kIrDAd context, so we can sleep.
+ * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
+ * long. Instead, for longer delays we start a timer to reschedule us later.
+ * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
+ * Both must be unlocked/restarted on completion - but only on final exit.
+ */
+
+static void sirdev_config_fsm(void *data)
+{
+ struct sir_dev *dev = data;
+ struct sir_fsm *fsm = &dev->fsm;
+ int next_state;
+ int ret = -1;
+ unsigned delay;
+
+ IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+ do {
+ IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
+ __FUNCTION__, fsm->state, fsm->substate);
+
+ next_state = fsm->state;
+ delay = 0;
+
+ switch(fsm->state) {
+
+ case SIRDEV_STATE_DONGLE_OPEN:
+ if (dev->dongle_drv != NULL) {
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+
+ /* Initialize dongle */
+ ret = sirdev_get_dongle(dev, fsm->param);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ /* Dongles are powered through the modem control lines which
+ * were just set during open. Before resetting, let's wait for
+ * the power to stabilize. This is what some dongle drivers did
+ * in open before, while others didn't - should be safe anyway.
+ */
+
+ delay = 50;
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+
+ fsm->param = 9600;
+
+ break;
+
+ case SIRDEV_STATE_DONGLE_CLOSE:
+ /* shouldn't we just treat this as success=? */
+ if (dev->dongle_drv == NULL) {
+ fsm->result = -EINVAL;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+
+ ret = sirdev_put_dongle(dev);
+ if (ret) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_DTR_RTS:
+ ret = sirdev_set_dtr_rts(dev,
+ (fsm->param&0x02) ? TRUE : FALSE,
+ (fsm->param&0x01) ? TRUE : FALSE);
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_SET_SPEED:
+ fsm->substate = SIRDEV_STATE_WAIT_XMIT;
+ next_state = SIRDEV_STATE_DONGLE_CHECK;
+ break;
+
+ case SIRDEV_STATE_DONGLE_CHECK:
+ ret = sirdev_tx_complete_fsm(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ if ((delay=ret) != 0)
+ break;
+
+ if (dev->dongle_drv) {
+ fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+ next_state = SIRDEV_STATE_DONGLE_RESET;
+ }
+ else {
+ dev->speed = fsm->param;
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_RESET:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->reset(dev);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0) {
+ /* set serial port according to dongle default speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
+ next_state = SIRDEV_STATE_DONGLE_SPEED;
+ }
+ break;
+
+ case SIRDEV_STATE_DONGLE_SPEED:
+ if (dev->dongle_drv->reset) {
+ ret = dev->dongle_drv->set_speed(dev, fsm->param);
+ if (ret < 0) {
+ fsm->result = ret;
+ next_state = SIRDEV_STATE_ERROR;
+ break;
+ }
+ }
+ else
+ ret = 0;
+ if ((delay=ret) == 0)
+ next_state = SIRDEV_STATE_PORT_SPEED;
+ break;
+
+ case SIRDEV_STATE_PORT_SPEED:
+ /* Finally we are ready to change the serial port speed */
+ if (dev->drv->set_speed)
+ dev->drv->set_speed(dev, dev->speed);
+ dev->new_speed = 0;
+ next_state = SIRDEV_STATE_DONE;
+ break;
+
+ case SIRDEV_STATE_DONE:
+ /* Signal network layer so it can send more frames */
+ netif_wake_queue(dev->netdev);
+ next_state = SIRDEV_STATE_COMPLETE;
+ break;
+
+ default:
+ IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+ fsm->result = -EINVAL;
+ /* fall thru */
+
+ case SIRDEV_STATE_ERROR:
+ IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+
+#if 0 /* don't enable this before we have netdev->tx_timeout to recover */
+ netif_stop_queue(dev->netdev);
+#else
+ netif_wake_queue(dev->netdev);
+#endif
+ /* fall thru */
+
+ case SIRDEV_STATE_COMPLETE:
+ /* config change finished, so we are not busy any longer */
+ sirdev_enable_rx(dev);
+ up(&fsm->sem);
+ return;
+ }
+ fsm->state = next_state;
+ } while(!delay);
+
+ queue_delayed_work(irda_sir_wq, &fsm->work, msecs_to_jiffies(delay));
+}
+
+/* schedule some device configuration task for execution by kIrDAd
+ * on behalf of the above state machine.
+ * can be called from process or interrupt/tasklet context.
+ */
+
+int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
+{
+ struct sir_fsm *fsm = &dev->fsm;
+
+ IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+
+ if (down_trylock(&fsm->sem)) {
+ if (in_interrupt() || in_atomic() || irqs_disabled()) {
+ IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+ return -EWOULDBLOCK;
+ } else
+ down(&fsm->sem);
+ }
+
+ if (fsm->state == SIRDEV_STATE_DEAD) {
+ /* race with sirdev_close should never happen */
+ IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+ up(&fsm->sem);
+ return -ESTALE; /* or better EPIPE? */
+ }
+
+ netif_stop_queue(dev->netdev);
+ atomic_set(&dev->enable_rx, 0);
+
+ fsm->state = initial_state;
+ fsm->param = param;
+ fsm->result = 0;
+
+ INIT_WORK(&fsm->work, sirdev_config_fsm, dev);
+ queue_work(irda_sir_wq, &fsm->work);
+ return 0;
+}
+
+
/***************************************************************************/
void sirdev_enable_rx(struct sir_dev *dev)
spin_lock_init(&dev->tx_lock);
init_MUTEX(&dev->fsm.sem);
- INIT_LIST_HEAD(&dev->fsm.rq.lh_request);
- dev->fsm.rq.pending = 0;
- init_timer(&dev->fsm.rq.timer);
-
dev->drv = drv;
dev->netdev = ndev;
}
EXPORT_SYMBOL(sirdev_put_instance);
+static int __init sir_wq_init(void)
+{
+ irda_sir_wq = create_singlethread_workqueue("irda_sir_wq");
+ if (!irda_sir_wq)
+ return -ENOMEM;
+ return 0;
+}
+
+static void __exit sir_wq_exit(void)
+{
+ destroy_workqueue(irda_sir_wq);
+}
+
+module_init(sir_wq_init);
+module_exit(sir_wq_exit);
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*********************************************************************
- *
- * sir_kthread.c: dedicated thread to process scheduled
- * sir device setup requests
- *
- * Copyright (c) 2002 Martin Diehl
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/**************************************************************************
- *
- * kIrDAd kernel thread and config state machine
- *
- */
-
-struct irda_request_queue {
- struct list_head request_list;
- spinlock_t lock;
- task_t *thread;
- struct completion exit;
- wait_queue_head_t kick, done;
- atomic_t num_pending;
-};
-
-static struct irda_request_queue irda_rq_queue;
-
-static int irda_queue_request(struct irda_request *rq)
-{
- int ret = 0;
- unsigned long flags;
-
- if (!test_and_set_bit(0, &rq->pending)) {
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
- wake_up(&irda_rq_queue.kick);
- atomic_inc(&irda_rq_queue.num_pending);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
- ret = 1;
- }
- return ret;
-}
-
-static void irda_request_timer(unsigned long data)
-{
- struct irda_request *rq = (struct irda_request *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
- wake_up(&irda_rq_queue.kick);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_queue_delayed_request(struct irda_request *rq, unsigned long delay)
-{
- int ret = 0;
- struct timer_list *timer = &rq->timer;
-
- if (!test_and_set_bit(0, &rq->pending)) {
- timer->expires = jiffies + delay;
- timer->function = irda_request_timer;
- timer->data = (unsigned long)rq;
- atomic_inc(&irda_rq_queue.num_pending);
- add_timer(timer);
- ret = 1;
- }
- return ret;
-}
-
-static void run_irda_queue(void)
-{
- unsigned long flags;
- struct list_head *entry, *tmp;
- struct irda_request *rq;
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- list_for_each_safe(entry, tmp, &irda_rq_queue.request_list) {
- rq = list_entry(entry, struct irda_request, lh_request);
- list_del_init(entry);
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-
- clear_bit(0, &rq->pending);
- rq->func(rq->data);
-
- if (atomic_dec_and_test(&irda_rq_queue.num_pending))
- wake_up(&irda_rq_queue.done);
-
- spin_lock_irqsave(&irda_rq_queue.lock, flags);
- }
- spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_thread(void *startup)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- daemonize("kIrDAd");
-
- irda_rq_queue.thread = current;
-
- complete((struct completion *)startup);
-
- while (irda_rq_queue.thread != NULL) {
-
- /* We use TASK_INTERRUPTIBLE, rather than
- * TASK_UNINTERRUPTIBLE. Andrew Morton made this
- * change ; he told me that it is safe, because "signal
- * blocking is now handled in daemonize()", he added
- * that the problem is that "uninterruptible sleep
- * contributes to load average", making user worry.
- * Jean II */
- set_task_state(current, TASK_INTERRUPTIBLE);
- add_wait_queue(&irda_rq_queue.kick, &wait);
- if (list_empty(&irda_rq_queue.request_list))
- schedule();
- else
- __set_task_state(current, TASK_RUNNING);
- remove_wait_queue(&irda_rq_queue.kick, &wait);
-
- /* make swsusp happy with our thread */
- try_to_freeze();
-
- run_irda_queue();
- }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
- reparent_to_init();
-#endif
- complete_and_exit(&irda_rq_queue.exit, 0);
- /* never reached */
- return 0;
-}
-
-
-static void flush_irda_queue(void)
-{
- if (atomic_read(&irda_rq_queue.num_pending)) {
-
- DECLARE_WAITQUEUE(wait, current);
-
- if (!list_empty(&irda_rq_queue.request_list))
- run_irda_queue();
-
- set_task_state(current, TASK_UNINTERRUPTIBLE);
- add_wait_queue(&irda_rq_queue.done, &wait);
- if (atomic_read(&irda_rq_queue.num_pending))
- schedule();
- else
- __set_task_state(current, TASK_RUNNING);
- remove_wait_queue(&irda_rq_queue.done, &wait);
- }
-}
-
-/* substate handler of the config-fsm to handle the cases where we want
- * to wait for transmit completion before changing the port configuration
- */
-
-static int irda_tx_complete_fsm(struct sir_dev *dev)
-{
- struct sir_fsm *fsm = &dev->fsm;
- unsigned next_state, delay;
- unsigned bytes_left;
-
- do {
- next_state = fsm->substate; /* default: stay in current substate */
- delay = 0;
-
- switch(fsm->substate) {
-
- case SIRDEV_STATE_WAIT_XMIT:
- if (dev->drv->chars_in_buffer)
- bytes_left = dev->drv->chars_in_buffer(dev);
- else
- bytes_left = 0;
- if (!bytes_left) {
- next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
- break;
- }
-
- if (dev->speed > 115200)
- delay = (bytes_left*8*10000) / (dev->speed/100);
- else if (dev->speed > 0)
- delay = (bytes_left*10*10000) / (dev->speed/100);
- else
- delay = 0;
- /* expected delay (usec) until remaining bytes are sent */
- if (delay < 100) {
- udelay(delay);
- delay = 0;
- break;
- }
- /* sleep some longer delay (msec) */
- delay = (delay+999) / 1000;
- break;
-
- case SIRDEV_STATE_WAIT_UNTIL_SENT:
- /* block until underlaying hardware buffer are empty */
- if (dev->drv->wait_until_sent)
- dev->drv->wait_until_sent(dev);
- next_state = SIRDEV_STATE_TX_DONE;
- break;
-
- case SIRDEV_STATE_TX_DONE:
- return 0;
-
- default:
- IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
- return -EINVAL;
- }
- fsm->substate = next_state;
- } while (delay == 0);
- return delay;
-}
-
-/*
- * Function irda_config_fsm
- *
- * State machine to handle the configuration of the device (and attached dongle, if any).
- * This handler is scheduled for execution in kIrDAd context, so we can sleep.
- * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
- * long. Instead, for longer delays we start a timer to reschedule us later.
- * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
- * Both must be unlocked/restarted on completion - but only on final exit.
- */
-
-static void irda_config_fsm(void *data)
-{
- struct sir_dev *dev = data;
- struct sir_fsm *fsm = &dev->fsm;
- int next_state;
- int ret = -1;
- unsigned delay;
-
- IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
-
- do {
- IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
- __FUNCTION__, fsm->state, fsm->substate);
-
- next_state = fsm->state;
- delay = 0;
-
- switch(fsm->state) {
-
- case SIRDEV_STATE_DONGLE_OPEN:
- if (dev->dongle_drv != NULL) {
- ret = sirdev_put_dongle(dev);
- if (ret) {
- fsm->result = -EINVAL;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
-
- /* Initialize dongle */
- ret = sirdev_get_dongle(dev, fsm->param);
- if (ret) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
-
- /* Dongles are powered through the modem control lines which
- * were just set during open. Before resetting, let's wait for
- * the power to stabilize. This is what some dongle drivers did
- * in open before, while others didn't - should be safe anyway.
- */
-
- delay = 50;
- fsm->substate = SIRDEV_STATE_DONGLE_RESET;
- next_state = SIRDEV_STATE_DONGLE_RESET;
-
- fsm->param = 9600;
-
- break;
-
- case SIRDEV_STATE_DONGLE_CLOSE:
- /* shouldn't we just treat this as success=? */
- if (dev->dongle_drv == NULL) {
- fsm->result = -EINVAL;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
-
- ret = sirdev_put_dongle(dev);
- if (ret) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_SET_DTR_RTS:
- ret = sirdev_set_dtr_rts(dev,
- (fsm->param&0x02) ? TRUE : FALSE,
- (fsm->param&0x01) ? TRUE : FALSE);
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_SET_SPEED:
- fsm->substate = SIRDEV_STATE_WAIT_XMIT;
- next_state = SIRDEV_STATE_DONGLE_CHECK;
- break;
-
- case SIRDEV_STATE_DONGLE_CHECK:
- ret = irda_tx_complete_fsm(dev);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- if ((delay=ret) != 0)
- break;
-
- if (dev->dongle_drv) {
- fsm->substate = SIRDEV_STATE_DONGLE_RESET;
- next_state = SIRDEV_STATE_DONGLE_RESET;
- }
- else {
- dev->speed = fsm->param;
- next_state = SIRDEV_STATE_PORT_SPEED;
- }
- break;
-
- case SIRDEV_STATE_DONGLE_RESET:
- if (dev->dongle_drv->reset) {
- ret = dev->dongle_drv->reset(dev);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
- else
- ret = 0;
- if ((delay=ret) == 0) {
- /* set serial port according to dongle default speed */
- if (dev->drv->set_speed)
- dev->drv->set_speed(dev, dev->speed);
- fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
- next_state = SIRDEV_STATE_DONGLE_SPEED;
- }
- break;
-
- case SIRDEV_STATE_DONGLE_SPEED:
- if (dev->dongle_drv->reset) {
- ret = dev->dongle_drv->set_speed(dev, fsm->param);
- if (ret < 0) {
- fsm->result = ret;
- next_state = SIRDEV_STATE_ERROR;
- break;
- }
- }
- else
- ret = 0;
- if ((delay=ret) == 0)
- next_state = SIRDEV_STATE_PORT_SPEED;
- break;
-
- case SIRDEV_STATE_PORT_SPEED:
- /* Finally we are ready to change the serial port speed */
- if (dev->drv->set_speed)
- dev->drv->set_speed(dev, dev->speed);
- dev->new_speed = 0;
- next_state = SIRDEV_STATE_DONE;
- break;
-
- case SIRDEV_STATE_DONE:
- /* Signal network layer so it can send more frames */
- netif_wake_queue(dev->netdev);
- next_state = SIRDEV_STATE_COMPLETE;
- break;
-
- default:
- IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
- fsm->result = -EINVAL;
- /* fall thru */
-
- case SIRDEV_STATE_ERROR:
- IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
-
-#if 0 /* don't enable this before we have netdev->tx_timeout to recover */
- netif_stop_queue(dev->netdev);
-#else
- netif_wake_queue(dev->netdev);
-#endif
- /* fall thru */
-
- case SIRDEV_STATE_COMPLETE:
- /* config change finished, so we are not busy any longer */
- sirdev_enable_rx(dev);
- up(&fsm->sem);
- return;
- }
- fsm->state = next_state;
- } while(!delay);
-
- irda_queue_delayed_request(&fsm->rq, msecs_to_jiffies(delay));
-}
-
-/* schedule some device configuration task for execution by kIrDAd
- * on behalf of the above state machine.
- * can be called from process or interrupt/tasklet context.
- */
-
-int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
-{
- struct sir_fsm *fsm = &dev->fsm;
- int xmit_was_down;
-
- IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
-
- if (down_trylock(&fsm->sem)) {
- if (in_interrupt() || in_atomic() || irqs_disabled()) {
- IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
- return -EWOULDBLOCK;
- } else
- down(&fsm->sem);
- }
-
- if (fsm->state == SIRDEV_STATE_DEAD) {
- /* race with sirdev_close should never happen */
- IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
- up(&fsm->sem);
- return -ESTALE; /* or better EPIPE? */
- }
-
- xmit_was_down = netif_queue_stopped(dev->netdev);
- netif_stop_queue(dev->netdev);
- atomic_set(&dev->enable_rx, 0);
-
- fsm->state = initial_state;
- fsm->param = param;
- fsm->result = 0;
-
- INIT_LIST_HEAD(&fsm->rq.lh_request);
- fsm->rq.pending = 0;
- fsm->rq.func = irda_config_fsm;
- fsm->rq.data = dev;
-
- if (!irda_queue_request(&fsm->rq)) { /* returns 0 on error! */
- atomic_set(&dev->enable_rx, 1);
- if (!xmit_was_down)
- netif_wake_queue(dev->netdev);
- up(&fsm->sem);
- return -EAGAIN;
- }
- return 0;
-}
-
-static int __init irda_thread_create(void)
-{
- struct completion startup;
- int pid;
-
- spin_lock_init(&irda_rq_queue.lock);
- irda_rq_queue.thread = NULL;
- INIT_LIST_HEAD(&irda_rq_queue.request_list);
- init_waitqueue_head(&irda_rq_queue.kick);
- init_waitqueue_head(&irda_rq_queue.done);
- atomic_set(&irda_rq_queue.num_pending, 0);
-
- init_completion(&startup);
- pid = kernel_thread(irda_thread, &startup, CLONE_FS|CLONE_FILES);
- if (pid <= 0)
- return -EAGAIN;
- else
- wait_for_completion(&startup);
-
- return 0;
-}
-
-static void __exit irda_thread_join(void)
-{
- if (irda_rq_queue.thread) {
- flush_irda_queue();
- init_completion(&irda_rq_queue.exit);
- irda_rq_queue.thread = NULL;
- wake_up(&irda_rq_queue.kick);
- wait_for_completion(&irda_rq_queue.exit);
- }
-}
-
-module_init(irda_thread_create);
-module_exit(irda_thread_join);
-
-MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
-MODULE_DESCRIPTION("IrDA SIR core");
-MODULE_LICENSE("GPL");
-
projects / openwrt / staging / blogic.git / commitdiff