Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.
MAC address assignment is moved to '10_fix_wifi_mac', so the device can
then be removed from the caldata extraction script '11-ath10k-caldata'.
Cc: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
&pcie0 {
status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ nvmem-cells = <&cal_ath10k>;
+ nvmem-cell-names = "calibration";
+ };
+};
+
+&art {
+ cal_ath10k: calibration@5000 {
+ reg = <0x5000 0x844>;
+ };
};
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
- dlink,dap-3662-a1)
- caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
- ;;
dlink,dir-859-a1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
dlink,dap-3320-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
- dlink,dap-3662-a1)
- [ "$PHYNBR" -eq 1 ] && \
- mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
- ;;
dlink,dap-2660-a1|\
dlink,dap-2680-a1|\
- dlink,dap-2695-a1)
+ dlink,dap-2695-a1|\
+ dlink,dap-3662-a1)
[ "$PHYNBR" -eq 0 ] && \
mtd_get_mac_ascii bdcfg "wlanmac_a" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" -eq 1 ] && \