# Driver interface for wired authenticator
CONFIG_DRIVER_WIRED=y
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
CONFIG_PEERKEY=y
# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
# Driver support is also needed for IEEE 802.11w.
#CONFIG_IEEE80211W=y
# Integrated EAP server
CONFIG_EAP=y
-# EAP-FAST for the integrated EAP server
-CONFIG_EAP_FAST=y
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+#CONFIG_ERP=y
# EAP-MD5 for the integrated EAP server
CONFIG_EAP_MD5=y
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
# EAP-SAKE for the integrated EAP server
#CONFIG_EAP_SAKE=y
#CONFIG_EAP_GPSK_SHA256=y
# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_FAST=y
# Wi-Fi Protected Setup (WPS)
CONFIG_WPS=y
-CONFIG_WPS2=y
# Enable UPnP support for external WPS Registrars
#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
# Trusted Network Connect (EAP-TNC)
#CONFIG_EAP_TNC=y
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
CONFIG_IEEE80211R=y
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
# IEEE 802.11n (High Throughput) support
CONFIG_IEEE80211N=y
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
# IEEE 802.11ac (Very High Throughput) support
CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# code is not needed.
#CONFIG_NO_STDOUT_DEBUG=y
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
# Send debug messages to syslog instead of stdout
CONFIG_DEBUG_SYSLOG=y
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
# Remove support for RADIUS accounting
#CONFIG_NO_ACCOUNTING=y
# Remove support for VLANs
#CONFIG_NO_VLAN=y
-CONFIG_TLS=internal
-CONFIG_INTERNAL_LIBTOMMATH=y
-CONFIG_INTERNAL_AES=y
-NEED_AES_DEC=y
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+CONFIG_FULL_DYNAMIC_VLAN=y
-CONFIG_NO_RANDOM_POOL=y
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
CONFIG_NO_DUMP_STATE=y
-CONFIG_WPS=y
-CONFIG_FULL_DYNAMIC_VLAN=y
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+CONFIG_NO_RANDOM_POOL=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+# Note: This is an experimental and not yet complete implementation. This
+# should not be enabled for production use.
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
CONFIG_UBUS=y
projects / openwrt / staging / kaloz.git / commitdiff