clk: bcm2835: Fix setting of PLL divider clock rates

Our dividers weren't being set successfully because CM_PASSWORD wasn't
included in the register write.  It looks easier to just compute the
divider to write ourselves than to update clk-divider for the ability
to OR in some arbitrary bits on write.

Fixes about half of the video modes on my HDMI monitor (everything
except 720x400).

Cc: stable@vger.kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 015e687ffabe18423016d6cd299e79ef96418bf4..9f4df8f645f8864b20df13965b8a05aac0b1f144 100644 (file)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1107,13 +1107,15 @@ static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
        struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
        struct bcm2835_cprman *cprman = divider->cprman;
        const struct bcm2835_pll_divider_data *data = divider->data;
-       u32 cm;
-       int ret;
+       u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS;
 
-       ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
-       if (ret)
-               return ret;
+       div = DIV_ROUND_UP_ULL(parent_rate, rate);
+
+       div = min(div, max_div);
+       if (div == max_div)
+               div = 0;
 
+       cprman_write(cprman, data->a2w_reg, div);
        cm = cprman_read(cprman, data->cm_reg);
        cprman_write(cprman, data->cm_reg, cm | data->load_mask);
        cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);