ath79: add support for TP-Link CPE510-v2/v3

TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, and 4 green LEDs
 - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in)
 - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
 - Adjustable transmission power from 0 to 23dBm/200mw

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[whitespace fixes]
Signed-off-by: Petr Štetiar <ynezz@true.cz>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 773e7ed26cda8aa3abf1c691e0e7ce8160f73616..cfd36459509e0bffe6886a24924bc5e3ef24eb5e 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -278,6 +278,91 @@ static struct device_info boards[] = {
                .first_sysupgrade_partition = "os-image",
                .last_sysupgrade_partition = "support-list",
        },
+
+       /** Firmware layout for the CPE510 V2 */
+       {
+               .id     = "CPE510V2",
+               .vendor = "CPE510(TP-LINK|UN|N300-5):2.0\r\n",
+               .support_list =
+                       "SupportList:\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|00000000):2.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|45550000):2.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5):2.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5):2.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5):2.0\r\n",
+               .support_trail = '\xff',
+               .soft_ver = NULL,
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"partition-table", 0x20000, 0x02000},
+                       {"default-mac", 0x30000, 0x00020},
+                       {"product-info", 0x31100, 0x00100},
+                       {"signature", 0x32000, 0x00400},
+                       {"os-image", 0x40000, 0x200000},
+                       {"file-system", 0x240000, 0x570000},
+                       {"soft-version", 0x7b0000, 0x00100},
+                       {"support-list", 0x7b1000, 0x00400},
+                       {"user-config", 0x7c0000, 0x10000},
+                       {"default-config", 0x7d0000, 0x10000},
+                       {"log", 0x7e0000, 0x10000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "support-list",
+       },
+
+       /** Firmware layout for the CPE510 V3 */
+       {
+               .id     = "CPE510V3",
+               .vendor = "CPE510(TP-LINK|UN|N300-5):3.0\r\n",
+               .support_list =
+                       "SupportList:\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|00000000):3.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|45550000):3.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5|55530000):3.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|00000000):3.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|45550000):3.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5|55530000):3.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|00000000):3.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|45550000):3.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
+                       "CPE510(TP-LINK|UN|N300-5):3.0\r\n"
+                       "CPE510(TP-LINK|EU|N300-5):3.0\r\n"
+                       "CPE510(TP-LINK|US|N300-5):3.0\r\n",
+               .support_trail = '\xff',
+               .soft_ver = NULL,
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"partition-table", 0x20000, 0x02000},
+                       {"default-mac", 0x30000, 0x00020},
+                       {"product-info", 0x31100, 0x00100},
+                       {"signature", 0x32000, 0x00400},
+                       {"os-image", 0x40000, 0x200000},
+                       {"file-system", 0x240000, 0x570000},
+                       {"soft-version", 0x7b0000, 0x00100},
+                       {"support-list", 0x7b1000, 0x00400},
+                       {"user-config", 0x7c0000, 0x10000},
+                       {"default-config", 0x7d0000, 0x10000},
+                       {"log", 0x7e0000, 0x10000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "support-list",
+       },
+
        /** Firmware layout for the CPE610V1 */
        {
                .id     = "CPE610V1",