gemini: Set proper default networks

Some Gemini devices are NAS type devices and need to ask for
DHCP IP on eth0. Some has a LAN/WAN setup. Add sensible
defaults for all known devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network
index d6ee5cadfe25a39674888536b62a94db368425e3..93a02a7564efdc6cf0e885006bc2afbce48825dc 100644 (file)
--- a/target/linux/gemini/base-files/etc/board.d/02_network
+++ b/target/linux/gemini/base-files/etc/board.d/02_network
@@ -9,16 +9,31 @@ dlink,dir-685)
        ucidef_set_interface "eth" device "eth0" protocol "none"
        ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
        ;;
+dlink,dns-313|\
+edimax,ns-2502|\
+raidsonic,ib-4220-b|\
+wiliboard,wbd111|\
+wiliboard,wbd222)
+       # NAS machines with a single ethernet port
+       ucidef_set_interface_lan "eth0" "dhcp"
+       ;;
 itian,sq201)
        # These are all connected to eth1 thru VSC7395
        ucidef_set_interface "eth" device "eth1" protocol "none"
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
        ;;
+ssi,1328)
+       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+       ;;
 storlink,gemini324)
        # These are all connected to eth1 thru VSC7385
        ucidef_set_interface "eth" device "eth1" protocol "none"
        ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
        ;;
+teltonika,rut1xx)
+       # One ethernet LAN which is offering DHCP
+       ucidef_set_interface_lan "eth0"
+       ;;
 esac
 
 board_config_flush