edimax_cax1800 \
netgear_rax120v2 \
netgear_wax218 \
+ netgear_wax620 \
prpl_haze \
qnap_301w \
redmi_ax6 \
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
+$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Netgear WAX620";
+ compatible = "netgear,wax620", "qcom,ipq8074";
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ ethernet0 = &dp6;
+ led-boot = &led_system_blue;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_blue;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ /*
+ * Netgear's U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs"
+ * That fails to create a UBI block device, so add it here.
+ */
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_red: system-red {
+ label = "system:red";
+ gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system-green {
+ label = "system:green";
+ gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_blue: system-blue {
+ label = "system:blue";
+ gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_lan_g {
+ label = "lan:green";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_lan_o {
+ label = "lan:orange";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_2g_b {
+ label = "wlan2g:blue";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_2g_g {
+ label = "wlan2g:green";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_5g_b {
+ label = "wlan5g:blue";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_5g_g {
+ label = "wlan5g:green";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x01>;
+ switch_lan_bmp = <0x3e>;
+ switch_wan_bmp = <0x40>;
+ switch_mac_mode = <0x00>;
+ switch_mac_mode1 = <0xff>;
+ switch_mac_mode2 = <0x0f>;
+ bm_tick_mode = <0x00>;
+ tm_tick_mode = <0x00>;
+
+ qcom,port_phyinfo {
+ port@5 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+ qca8081_28: ethernet-phy@28 {
+ reg = <28>;
+ };
+};
+
+&dp6 {
+ status = "okay";
+ phy-handle = <&qca8081_28>;
+ label = "lan";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Netgear-WAX620";
+};
projects / openwrt / staging / dangole.git / commitdiff