#define UNSOL_VALID 0x00000001
};
+#define LPFC_USER_LINK_SPEED_AUTO 0 /* auto select (default)*/
+#define LPFC_USER_LINK_SPEED_1G 1 /* 1 Gigabaud */
+#define LPFC_USER_LINK_SPEED_2G 2 /* 2 Gigabaud */
+#define LPFC_USER_LINK_SPEED_4G 4 /* 4 Gigabaud */
+#define LPFC_USER_LINK_SPEED_8G 8 /* 8 Gigabaud */
+#define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
+#define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_16G
+#define LPFC_USER_LINK_SPEED_BITMAP ((1 << LPFC_USER_LINK_SPEED_16G) | \
+ (1 << LPFC_USER_LINK_SPEED_10G) | \
+ (1 << LPFC_USER_LINK_SPEED_8G) | \
+ (1 << LPFC_USER_LINK_SPEED_4G) | \
+ (1 << LPFC_USER_LINK_SPEED_2G) | \
+ (1 << LPFC_USER_LINK_SPEED_1G) | \
+ (1 << LPFC_USER_LINK_SPEED_AUTO))
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
+
struct lpfc_hba {
/* SCSI interface function jump table entries */
int (*lpfc_new_scsi_buf)
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
-#define HBA_FCOE_SUPPORT 0x4 /* HBA function supports FCOE */
+#define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */
#define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/
#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
#define FCP_XRI_ABORT_EVENT 0x20
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
-#define LPFC_MAX_LINK_SPEED 8
-#define LPFC_LINK_SPEED_BITMAP 0x00000117
-#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
-
/**
* lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
if (phba->sli.sli_flag & LPFC_MENLO_MAINT)
len += snprintf(buf + len, PAGE_SIZE-len,
" Menlo Maint Mode\n");
- else if (phba->fc_topology == TOPOLOGY_LOOP) {
+ else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
if (vport->fc_flag & FC_PUBLIC_LOOP)
len += snprintf(buf + len, PAGE_SIZE-len,
" Public Loop\n");
/*
# lpfc_link_speed: Link speed selection for initializing the Fibre Channel
# connection.
-# 0 = auto select (default)
-# 1 = 1 Gigabaud
-# 2 = 2 Gigabaud
-# 4 = 4 Gigabaud
-# 8 = 8 Gigabaud
-# Value range is [0,8]. Default value is 0.
+# Value range is [0,16]. Default value is 0.
*/
-
/**
* lpfc_link_speed_set - Set the adapters link speed
* @phba: lpfc_hba pointer.
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- int val = 0;
+ int val = LPFC_USER_LINK_SPEED_AUTO;
int nolip = 0;
const char *val_buf = buf;
int err;
if (sscanf(val_buf, "%i", &val) != 1)
return -EINVAL;
- if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
- ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
- ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
- ((val == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
- ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
+ if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
+ ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb))) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2879 lpfc_link_speed attribute cannot be set "
+ "to %d. Speed is not supported by this port.\n",
+ val);
return -EINVAL;
-
- if ((val >= 0 && val <= 8)
- && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ }
+ if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
+ (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
if (nolip)
} else
return strlen(buf);
}
-
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "%d:0469 lpfc_link_speed attribute cannot be set to %d, "
- "allowed range is [0, 8]\n",
- phba->brd_no, val);
+ "0469 lpfc_link_speed attribute cannot be set to %d, "
+ "allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val);
return -EINVAL;
}
static int
lpfc_link_speed_init(struct lpfc_hba *phba, int val)
{
- if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
- && (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+ if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
+ (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
phba->cfg_link_speed = val;
return 0;
}
"0405 lpfc_link_speed attribute cannot "
"be set to %d, allowed values are "
"["LPFC_LINK_SPEED_STRING"]\n", val);
- phba->cfg_link_speed = 0;
+ phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
return -EINVAL;
}
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
- lpfc_link_speed_show, lpfc_link_speed_store);
+ lpfc_link_speed_show, lpfc_link_speed_store);
/*
# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
}
break;
case MBX_READ_SPARM64:
- case MBX_READ_LA:
- case MBX_READ_LA64:
+ case MBX_READ_TOPOLOGY:
case MBX_REG_LOGIN:
case MBX_REG_LOGIN64:
case MBX_CONFIG_PORT:
if (vport->port_type == LPFC_NPIV_PORT) {
fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
} else if (lpfc_is_link_up(phba)) {
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
if (vport->fc_flag & FC_PUBLIC_LOOP)
fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
else
if (lpfc_is_link_up(phba)) {
switch(phba->fc_linkspeed) {
- case LA_1GHZ_LINK:
- fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+ case LPFC_LINK_SPEED_1GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
break;
- case LA_2GHZ_LINK:
- fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
+ case LPFC_LINK_SPEED_2GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
break;
- case LA_4GHZ_LINK:
- fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
+ case LPFC_LINK_SPEED_4GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
break;
- case LA_8GHZ_LINK:
- fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
+ case LPFC_LINK_SPEED_8GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
break;
- case LA_10GHZ_LINK:
- fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ case LPFC_LINK_SPEED_10GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
- default:
- fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+ case LPFC_LINK_SPEED_16GHZ:
+ fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
+ break;
+ default:
+ fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
} else
spin_lock_irq(shost->host_lock);
if ((vport->fc_flag & FC_FABRIC) ||
- ((phba->fc_topology == TOPOLOGY_LOOP) &&
+ ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
(vport->fc_flag & FC_PUBLIC_LOOP)))
node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
else
hs->invalid_crc_count -= lso->invalid_crc_count;
hs->error_frames -= lso->error_frames;
- if (phba->hba_flag & HBA_FCOE_SUPPORT) {
+ if (phba->hba_flag & HBA_FCOE_MODE) {
hs->lip_count = -1;
hs->nos_count = (phba->link_events >> 1);
hs->nos_count -= lso->link_events;
- } else if (phba->fc_topology == TOPOLOGY_LOOP) {
+ } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
hs->lip_count = (phba->fc_eventTag >> 1);
hs->lip_count -= lso->link_events;
hs->nos_count = -1;
lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
lso->error_frames = pmb->un.varRdLnk.crcCnt;
- if (phba->hba_flag & HBA_FCOE_SUPPORT)
+ if (phba->hba_flag & HBA_FCOE_MODE)
lso->link_events = (phba->link_events >> 1);
else
lso->link_events = (phba->fc_eventTag >> 1);
phba->wait_4_mlo_maint_flg = 1;
} else if (mb->un.varWords[0] == SETVAR_MLORST) {
phba->link_flag &= ~LS_LOOPBACK_MODE;
- phba->fc_topology = TOPOLOGY_PT_PT;
+ phba->fc_topology = LPFC_TOPOLOGY_PT_PT;
}
break;
case MBX_READ_SPARM64:
- case MBX_READ_LA:
- case MBX_READ_LA64:
+ case MBX_READ_TOPOLOGY:
case MBX_REG_LOGIN:
case MBX_REG_LOGIN64:
case MBX_CONFIG_PORT:
void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *);
+int lpfc_read_topology(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *);
void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_issue_clear_la(struct lpfc_hba *, struct lpfc_vport *);
void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_linkdown(struct lpfc_hba *);
void lpfc_linkdown_port(struct lpfc_vport *);
void lpfc_port_link_failure(struct lpfc_vport *);
-void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_read_topology(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_init_vpi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *);
void lpfc_retry_pport_discovery(struct lpfc_hba *);
int lpfc_els_chk_latt(struct lpfc_vport *);
int lpfc_els_abort_flogi(struct lpfc_hba *);
int lpfc_initial_flogi(struct lpfc_vport *);
+void lpfc_issue_init_vfi(struct lpfc_vport *);
int lpfc_initial_fdisc(struct lpfc_vport *);
int lpfc_issue_els_plogi(struct lpfc_vport *, uint32_t, uint8_t);
int lpfc_issue_els_prli(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
-#define HBA_PORTSPEED_UNKNOWN 0 /* Unknown - transceiver
- * incapable of reporting */
-#define HBA_PORTSPEED_1GBIT 1 /* 1 GBit/sec */
-#define HBA_PORTSPEED_2GBIT 2 /* 2 GBit/sec */
-#define HBA_PORTSPEED_4GBIT 8 /* 4 GBit/sec */
-#define HBA_PORTSPEED_8GBIT 16 /* 8 GBit/sec */
-#define HBA_PORTSPEED_10GBIT 4 /* 10 GBit/sec */
-#define HBA_PORTSPEED_NOT_NEGOTIATED 5 /* Speed not established */
+/* FDMI Port Speed definitions */
+#define HBA_PORTSPEED_1GBIT 0x0001 /* 1 GBit/sec */
+#define HBA_PORTSPEED_2GBIT 0x0002 /* 2 GBit/sec */
+#define HBA_PORTSPEED_4GBIT 0x0008 /* 4 GBit/sec */
+#define HBA_PORTSPEED_10GBIT 0x0004 /* 10 GBit/sec */
+#define HBA_PORTSPEED_8GBIT 0x0010 /* 8 GBit/sec */
+#define HBA_PORTSPEED_16GBIT 0x0020 /* 16 GBit/sec */
+#define HBA_PORTSPEED_UNKNOWN 0x0800 /* Unknown */
#define FOURBYTES 4
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
ae->un.SupportSpeed = 0;
+ if (phba->lmt & LMT_16Gb)
+ ae->un.SupportSpeed |= HBA_PORTSPEED_16GBIT;
if (phba->lmt & LMT_10Gb)
- ae->un.SupportSpeed = HBA_PORTSPEED_10GBIT;
+ ae->un.SupportSpeed |= HBA_PORTSPEED_10GBIT;
if (phba->lmt & LMT_8Gb)
ae->un.SupportSpeed |= HBA_PORTSPEED_8GBIT;
if (phba->lmt & LMT_4Gb)
ae->ad.bits.AttrType = be16_to_cpu(PORT_SPEED);
ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
switch(phba->fc_linkspeed) {
- case LA_1GHZ_LINK:
- ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
+ case LPFC_LINK_SPEED_1GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
break;
- case LA_2GHZ_LINK:
- ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
+ case LPFC_LINK_SPEED_2GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
break;
- case LA_4GHZ_LINK:
- ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
+ case LPFC_LINK_SPEED_4GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
break;
- case LA_8GHZ_LINK:
- ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
+ case LPFC_LINK_SPEED_8GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
break;
- case LA_10GHZ_LINK:
- ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+ case LPFC_LINK_SPEED_10GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
break;
- default:
- ae->un.PortSpeed =
- HBA_PORTSPEED_UNKNOWN;
+ case LPFC_LINK_SPEED_16GHZ:
+ ae->un.PortSpeed = HBA_PORTSPEED_16GBIT;
+ break;
+ default:
+ ae->un.PortSpeed = HBA_PORTSPEED_UNKNOWN;
break;
}
pab->ab.EntryCnt++;
phba->fc_edtovResol = sp->cmn.edtovResolution;
phba->fc_ratov = (be32_to_cpu(sp->cmn.w2.r_a_tov) + 999) / 1000;
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_PUBLIC_LOOP;
spin_unlock_irq(shost->host_lock);
if (lpfc_els_retry(phba, cmdiocb, rspiocb))
goto out;
+ /* FLOGI failure */
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0100 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+ irsp->ulpStatus, irsp->un.ulpWord[4],
+ irsp->ulpTimeout);
+
/* FLOGI failed, so there is no fabric */
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
*/
if (phba->alpa_map[0] == 0) {
vport->cfg_discovery_threads = LPFC_MAX_DISC_THREADS;
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (!(vport->fc_flag & FC_VFI_REGISTERED) ||
+ (vport->fc_prevDID != vport->fc_myDID))) {
+ if (vport->fc_flag & FC_VFI_REGISTERED)
+ lpfc_sli4_unreg_all_rpis(vport);
+ lpfc_issue_reg_vfi(vport);
+ lpfc_nlp_put(ndlp);
+ goto out;
+ }
}
-
- /* FLOGI failure */
- lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0100 FLOGI failure Status:x%x/x%x TMO:x%x\n",
- irsp->ulpStatus, irsp->un.ulpWord[4],
- irsp->ulpTimeout);
goto flogifail;
}
spin_lock_irq(shost->host_lock);
*/
if (sp->cmn.fPort)
rc = lpfc_cmpl_els_flogi_fabric(vport, ndlp, sp, irsp);
- else if (!(phba->hba_flag & HBA_FCOE_SUPPORT))
+ else if (!(phba->hba_flag & HBA_FCOE_MODE))
rc = lpfc_cmpl_els_flogi_nport(vport, ndlp, sp);
else {
lpfc_printf_vlog(vport, KERN_ERR,
icmd->ulpCt_l = 0;
}
- if (phba->fc_topology != TOPOLOGY_LOOP) {
+ if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
icmd->un.elsreq64.myID = 0;
icmd->un.elsreq64.fl = 1;
}
if (cmd == ELS_CMD_FLOGI) {
if (PCI_DEVICE_ID_HORNET ==
phba->pcidev->device) {
- phba->fc_topology = TOPOLOGY_LOOP;
+ phba->fc_topology = LPFC_TOPOLOGY_LOOP;
phba->pport->fc_myDID = 0;
phba->alpa_map[0] = 0;
phba->alpa_map[1] = 0;
retry = 1;
if (((cmd == ELS_CMD_FLOGI) || (cmd == ELS_CMD_FDISC)) &&
- (phba->fc_topology != TOPOLOGY_LOOP) &&
+ (phba->fc_topology != LPFC_TOPOLOGY_LOOP) &&
!lpfc_error_lost_link(irsp)) {
/* FLOGI retry policy */
retry = 1;
lpfc_set_disctmo(vport);
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
/* We should never receive a FLOGI in loop mode, ignore it */
did = icmd->un.elsreq64.remoteID;
pcmd += sizeof(uint32_t); /* Skip past command */
rps_rsp = (RPS_RSP *)pcmd;
- if (phba->fc_topology != TOPOLOGY_LOOP)
+ if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
status = 0x10;
else
status = 0x8;
(memcmp(&phba->fc_fabparam.portName, &fp->FportName,
sizeof(struct lpfc_name)))) {
/* This port has switched fabrics. FLOGI is required */
- lpfc_initial_flogi(vport);
+ lpfc_issue_init_vfi(vport);
} else {
/* FAN verified - skip FLOGI */
vport->fc_myDID = vport->fc_prevDID;
if (!ndlp) {
ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
if (!ndlp) {
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_disc_start(vport);
return;
}
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
if (!ndlp) {
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_disc_start(vport);
return;
}
spin_unlock_irq(shost->host_lock);
if (vport->port_type == LPFC_PHYSICAL_PORT
&& !(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
- lpfc_initial_flogi(vport);
+ lpfc_issue_init_vfi(vport);
else
lpfc_initial_fdisc(vport);
break;
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
vport->fc_flag |= FC_FABRIC;
- if (vport->phba->fc_topology == TOPOLOGY_LOOP)
+ if (vport->phba->fc_topology == LPFC_TOPOLOGY_LOOP)
vport->fc_flag |= FC_PUBLIC_LOOP;
spin_unlock_irq(shost->host_lock);
mempool_free(pmb, phba->mbox_mem_pool);
- if (phba->fc_topology == TOPOLOGY_LOOP &&
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP &&
vport->fc_flag & FC_PUBLIC_LOOP &&
!(vport->fc_flag & FC_LBIT)) {
/* Need to wait for FAN - use discovery timer
/* Start discovery by sending a FLOGI. port_state is identically
* LPFC_FLOGI while waiting for FLOGI cmpl
*/
- if (vport->port_state != LPFC_FLOGI) {
+ if (vport->port_state != LPFC_FLOGI)
lpfc_initial_flogi(vport);
- }
return;
out:
if (vport->port_state != LPFC_FLOGI) {
phba->hba_flag |= FCF_RR_INPROG;
spin_unlock_irq(&phba->hbalock);
- lpfc_initial_flogi(vport);
+ lpfc_issue_init_vfi(vport);
goto out;
}
spin_unlock_irq(&phba->hbalock);
if (phba->pport->port_state != LPFC_FLOGI) {
phba->hba_flag |= FCF_RR_INPROG;
spin_unlock_irq(&phba->hbalock);
- lpfc_initial_flogi(phba->pport);
+ lpfc_issue_init_vfi(phba->pport);
return;
}
spin_unlock_irq(&phba->hbalock);
phba->fcf.current_rec.fcf_indx, fcf_index);
/* Wait 500 ms before retrying FLOGI to current FCF */
msleep(500);
- lpfc_initial_flogi(phba->pport);
+ lpfc_issue_init_vfi(phba->pport);
goto out;
}
lpfc_sli4_mbox_cmd_free(phba, mboxq);
}
+/**
+ * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox data structure.
+ *
+ * This function handles completion of init vfi mailbox command.
+ */
+void
+lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus && (mboxq->u.mb.mbxStatus != 0x4002)) {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_MBOX,
+ "2891 Init VFI mailbox failed 0x%x\n",
+ mboxq->u.mb.mbxStatus);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ return;
+ }
+ lpfc_initial_flogi(vport);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
+ * @vport: pointer to lpfc_vport data structure.
+ *
+ * This function issue a init_vfi mailbox command to initialize the VFI and
+ * VPI for the physical port.
+ */
+void
+lpfc_issue_init_vfi(struct lpfc_vport *vport)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int rc;
+ struct lpfc_hba *phba = vport->phba;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_MBOX, "2892 Failed to allocate "
+ "init_vfi mailbox\n");
+ return;
+ }
+ lpfc_init_vfi(mboxq, vport);
+ mboxq->mbox_cmpl = lpfc_init_vfi_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n");
+ mempool_free(mboxq, vport->phba->mbox_mem_pool);
+ }
+}
+
/**
* lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
* @phba: pointer to lpfc hba data structure.
FC_VPORT_FAILED);
continue;
}
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_vport_set_state(vports[i],
FC_VPORT_LINKDOWN);
continue;
"2018 REG_VFI mbxStatus error x%x "
"HBA state x%x\n",
mboxq->u.mb.mbxStatus, vport->port_state);
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
/* FLOGI failed, use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* Start discovery */
spin_unlock_irq(shost->host_lock);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
- lpfc_start_fdiscs(phba);
- lpfc_do_scr_ns_plogi(phba, vport);
+ /* For private loop just start discovery and we are done. */
+ if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
+ (phba->alpa_map[0] == 0) &&
+ !(vport->fc_flag & FC_PUBLIC_LOOP)) {
+ /* Use loop map to make discovery list */
+ lpfc_disc_list_loopmap(vport);
+ /* Start discovery */
+ lpfc_disc_start(vport);
+ } else {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ }
}
fail_free_mem:
}
static void
-lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
+lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
{
struct lpfc_vport *vport = phba->pport;
LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
struct fcf_record *fcf_record;
spin_lock_irq(&phba->hbalock);
- switch (la->UlnkSpeed) {
- case LA_1GHZ_LINK:
- phba->fc_linkspeed = LA_1GHZ_LINK;
- break;
- case LA_2GHZ_LINK:
- phba->fc_linkspeed = LA_2GHZ_LINK;
- break;
- case LA_4GHZ_LINK:
- phba->fc_linkspeed = LA_4GHZ_LINK;
- break;
- case LA_8GHZ_LINK:
- phba->fc_linkspeed = LA_8GHZ_LINK;
- break;
- case LA_10GHZ_LINK:
- phba->fc_linkspeed = LA_10GHZ_LINK;
+ switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
+ case LPFC_LINK_SPEED_1GHZ:
+ case LPFC_LINK_SPEED_2GHZ:
+ case LPFC_LINK_SPEED_4GHZ:
+ case LPFC_LINK_SPEED_8GHZ:
+ case LPFC_LINK_SPEED_10GHZ:
+ case LPFC_LINK_SPEED_16GHZ:
+ phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
break;
default:
- phba->fc_linkspeed = LA_UNKNW_LINK;
+ phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
break;
}
- phba->fc_topology = la->topology;
+ phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
/* if npiv is enabled and this adapter supports npiv log
"1309 Link Up Event npiv not supported in loop "
"topology\n");
/* Get Loop Map information */
- if (la->il)
+ if (bf_get(lpfc_mbx_read_top_il, la))
vport->fc_flag |= FC_LBIT;
- vport->fc_myDID = la->granted_AL_PA;
- i = la->un.lilpBde64.tus.f.bdeSize;
+ vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
+ i = la->lilpBde64.tus.f.bdeSize;
if (i == 0) {
phba->alpa_map[0] = 0;
goto out;
}
- if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!cfglink_mbox)
goto out;
/*
- * This routine handles processing a READ_LA mailbox
+ * This routine handles processing a READ_TOPOLOGY mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
* as the completion routine when the command is
* handed off to the SLI layer.
*/
void
-lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- READ_LA_VAR *la;
+ struct lpfc_mbx_read_top *la;
MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
mb->mbxStatus, vport->port_state);
lpfc_mbx_issue_link_down(phba);
phba->link_state = LPFC_HBA_ERROR;
- goto lpfc_mbx_cmpl_read_la_free_mbuf;
+ goto lpfc_mbx_cmpl_read_topology_free_mbuf;
}
- la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+ la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
memcpy(&phba->alpa_map[0], mp->virt, 128);
spin_lock_irq(shost->host_lock);
- if (la->pb)
+ if (bf_get(lpfc_mbx_read_top_pb, la))
vport->fc_flag |= FC_BYPASSED_MODE;
else
vport->fc_flag &= ~FC_BYPASSED_MODE;
if ((phba->fc_eventTag < la->eventTag) ||
(phba->fc_eventTag == la->eventTag)) {
phba->fc_stat.LinkMultiEvent++;
- if (la->attType == AT_LINK_UP)
+ if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)
if (phba->fc_eventTag != 0)
lpfc_linkdown(phba);
}
phba->fc_eventTag = la->eventTag;
spin_lock_irq(&phba->hbalock);
- if (la->mm)
+ if (bf_get(lpfc_mbx_read_top_mm, la))
phba->sli.sli_flag |= LPFC_MENLO_MAINT;
else
phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
spin_unlock_irq(&phba->hbalock);
phba->link_events++;
- if (la->attType == AT_LINK_UP && (!la->mm)) {
+ if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) &&
+ (!bf_get(lpfc_mbx_read_top_mm, la))) {
phba->fc_stat.LinkUp++;
if (phba->link_flag & LS_LOOPBACK_MODE) {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1306 Link Up Event in loop back mode "
"x%x received Data: x%x x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
- la->granted_AL_PA, la->UlnkSpeed,
+ bf_get(lpfc_mbx_read_top_alpa_granted,
+ la),
+ bf_get(lpfc_mbx_read_top_link_spd, la),
phba->alpa_map[0]);
} else {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1303 Link Up Event x%x received "
"Data: x%x x%x x%x x%x x%x x%x %d\n",
la->eventTag, phba->fc_eventTag,
- la->granted_AL_PA, la->UlnkSpeed,
+ bf_get(lpfc_mbx_read_top_alpa_granted,
+ la),
+ bf_get(lpfc_mbx_read_top_link_spd, la),
phba->alpa_map[0],
- la->mm, la->fa,
+ bf_get(lpfc_mbx_read_top_mm, la),
+ bf_get(lpfc_mbx_read_top_fa, la),
phba->wait_4_mlo_maint_flg);
}
lpfc_mbx_process_link_up(phba, la);
- } else if (la->attType == AT_LINK_DOWN) {
+ } else if (bf_get(lpfc_mbx_read_top_att_type, la) ==
+ LPFC_ATT_LINK_DOWN) {
phba->fc_stat.LinkDown++;
if (phba->link_flag & LS_LOOPBACK_MODE) {
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"Data: x%x x%x x%x x%x x%x\n",
la->eventTag, phba->fc_eventTag,
phba->pport->port_state, vport->fc_flag,
- la->mm, la->fa);
+ bf_get(lpfc_mbx_read_top_mm, la),
+ bf_get(lpfc_mbx_read_top_fa, la));
}
lpfc_mbx_issue_link_down(phba);
}
- if (la->mm && la->attType == AT_LINK_UP) {
+ if ((bf_get(lpfc_mbx_read_top_mm, la)) &&
+ (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)) {
if (phba->link_state != LPFC_LINK_DOWN) {
phba->fc_stat.LinkDown++;
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
}
}
- if (la->fa) {
- if (la->mm)
+ if (bf_get(lpfc_mbx_read_top_fa, la)) {
+ if (bf_get(lpfc_mbx_read_top_mm, la))
lpfc_issue_clear_la(phba, vport);
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
- "1311 fa %d\n", la->fa);
+ "1311 fa %d\n",
+ bf_get(lpfc_mbx_read_top_fa, la));
}
-lpfc_mbx_cmpl_read_la_free_mbuf:
+lpfc_mbx_cmpl_read_topology_free_mbuf:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
/* FLOGI failed, use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* If no other thread is using the ndlp, free it */
lpfc_nlp_not_used(ndlp);
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
/*
* RegLogin failed, use loop map to make discovery
* list
if (!lpfc_is_link_up(phba))
return;
- if (phba->fc_topology != TOPOLOGY_LOOP)
+ if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
return;
/* Check for loop map present or not */
}
}
if (vport->port_state != LPFC_FLOGI) {
- lpfc_initial_flogi(vport);
+ if (phba->sli_rev <= LPFC_SLI_REV3)
+ lpfc_initial_flogi(vport);
+ else
+ lpfc_issue_init_vfi(vport);
return;
}
break;
* registered, do nothing.
*/
spin_lock_irq(&phba->hbalock);
- if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+ if (!(phba->hba_flag & HBA_FCOE_MODE) ||
!(phba->fcf.fcf_flag & FCF_REGISTERED) ||
!(phba->hba_flag & HBA_FIP_SUPPORT) ||
(phba->fcf.fcf_flag & FCF_DISCOVERY) ||
#define MBX_READ_LNK_STAT 0x12
#define MBX_REG_LOGIN 0x13
#define MBX_UNREG_LOGIN 0x14
-#define MBX_READ_LA 0x15
#define MBX_CLEAR_LA 0x16
#define MBX_DUMP_MEMORY 0x17
#define MBX_DUMP_CONTEXT 0x18
#define MBX_READ_SPARM64 0x8D
#define MBX_READ_RPI64 0x8F
#define MBX_REG_LOGIN64 0x93
-#define MBX_READ_LA64 0x95
+#define MBX_READ_TOPOLOGY 0x95
#define MBX_REG_VPI 0x96
#define MBX_UNREG_VPI 0x97
#define FLAGS_IMED_ABORT 0x04000 /* Bit 14 */
uint32_t link_speed;
-#define LINK_SPEED_AUTO 0 /* Auto selection */
-#define LINK_SPEED_1G 1 /* 1 Gigabaud */
-#define LINK_SPEED_2G 2 /* 2 Gigabaud */
-#define LINK_SPEED_4G 4 /* 4 Gigabaud */
-#define LINK_SPEED_8G 8 /* 8 Gigabaud */
-#define LINK_SPEED_10G 16 /* 10 Gigabaud */
+#define LINK_SPEED_AUTO 0x0 /* Auto selection */
+#define LINK_SPEED_1G 0x1 /* 1 Gigabaud */
+#define LINK_SPEED_2G 0x2 /* 2 Gigabaud */
+#define LINK_SPEED_4G 0x4 /* 4 Gigabaud */
+#define LINK_SPEED_8G 0x8 /* 8 Gigabaud */
+#define LINK_SPEED_10G 0x10 /* 10 Gigabaud */
+#define LINK_SPEED_16G 0x11 /* 16 Gigabaud */
} INIT_LINK_VAR;
#define LMT_4Gb 0x040
#define LMT_8Gb 0x080
#define LMT_10Gb 0x100
+#define LMT_16Gb 0x200
uint32_t rsvd2;
uint32_t rsvd3;
uint32_t max_xri;
#endif
} UNREG_D_ID_VAR;
-/* Structure for MB Command READ_LA (21) */
-/* Structure for MB Command READ_LA64 (0x95) */
-
-typedef struct {
+/* Structure for MB Command READ_TOPOLOGY (0x95) */
+struct lpfc_mbx_read_top {
uint32_t eventTag; /* Event tag */
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd1:19;
- uint32_t fa:1;
- uint32_t mm:1; /* Menlo Maintenance mode enabled */
- uint32_t rx:1;
- uint32_t pb:1;
- uint32_t il:1;
- uint32_t attType:8;
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t attType:8;
- uint32_t il:1;
- uint32_t pb:1;
- uint32_t rx:1;
- uint32_t mm:1;
- uint32_t fa:1;
- uint32_t rsvd1:19;
-#endif
-
-#define AT_RESERVED 0x00 /* Reserved - attType */
-#define AT_LINK_UP 0x01 /* Link is up */
-#define AT_LINK_DOWN 0x02 /* Link is down */
-
-#ifdef __BIG_ENDIAN_BITFIELD
- uint8_t granted_AL_PA;
- uint8_t lipAlPs;
- uint8_t lipType;
- uint8_t topology;
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint8_t topology;
- uint8_t lipType;
- uint8_t lipAlPs;
- uint8_t granted_AL_PA;
-#endif
-
-#define TOPOLOGY_PT_PT 0x01 /* Topology is pt-pt / pt-fabric */
-#define TOPOLOGY_LOOP 0x02 /* Topology is FC-AL */
-#define TOPOLOGY_LNK_MENLO_MAINTENANCE 0x05 /* maint mode zephtr to menlo */
-
- union {
- struct ulp_bde lilpBde; /* This BDE points to a 128 byte buffer
- to */
- /* store the LILP AL_PA position map into */
- struct ulp_bde64 lilpBde64;
- } un;
-
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t Dlu:1;
- uint32_t Dtf:1;
- uint32_t Drsvd2:14;
- uint32_t DlnkSpeed:8;
- uint32_t DnlPort:4;
- uint32_t Dtx:2;
- uint32_t Drx:2;
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t Drx:2;
- uint32_t Dtx:2;
- uint32_t DnlPort:4;
- uint32_t DlnkSpeed:8;
- uint32_t Drsvd2:14;
- uint32_t Dtf:1;
- uint32_t Dlu:1;
-#endif
-
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t Ulu:1;
- uint32_t Utf:1;
- uint32_t Ursvd2:14;
- uint32_t UlnkSpeed:8;
- uint32_t UnlPort:4;
- uint32_t Utx:2;
- uint32_t Urx:2;
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t Urx:2;
- uint32_t Utx:2;
- uint32_t UnlPort:4;
- uint32_t UlnkSpeed:8;
- uint32_t Ursvd2:14;
- uint32_t Utf:1;
- uint32_t Ulu:1;
-#endif
-
-#define LA_UNKNW_LINK 0x0 /* lnkSpeed */
-#define LA_1GHZ_LINK 0x04 /* lnkSpeed */
-#define LA_2GHZ_LINK 0x08 /* lnkSpeed */
-#define LA_4GHZ_LINK 0x10 /* lnkSpeed */
-#define LA_8GHZ_LINK 0x20 /* lnkSpeed */
-#define LA_10GHZ_LINK 0x40 /* lnkSpeed */
-
-} READ_LA_VAR;
+ uint32_t word2;
+#define lpfc_mbx_read_top_fa_SHIFT 12
+#define lpfc_mbx_read_top_fa_MASK 0x00000001
+#define lpfc_mbx_read_top_fa_WORD word2
+#define lpfc_mbx_read_top_mm_SHIFT 11
+#define lpfc_mbx_read_top_mm_MASK 0x00000001
+#define lpfc_mbx_read_top_mm_WORD word2
+#define lpfc_mbx_read_top_pb_SHIFT 9
+#define lpfc_mbx_read_top_pb_MASK 0X00000001
+#define lpfc_mbx_read_top_pb_WORD word2
+#define lpfc_mbx_read_top_il_SHIFT 8
+#define lpfc_mbx_read_top_il_MASK 0x00000001
+#define lpfc_mbx_read_top_il_WORD word2
+#define lpfc_mbx_read_top_att_type_SHIFT 0
+#define lpfc_mbx_read_top_att_type_MASK 0x000000FF
+#define lpfc_mbx_read_top_att_type_WORD word2
+#define LPFC_ATT_RESERVED 0x00 /* Reserved - attType */
+#define LPFC_ATT_LINK_UP 0x01 /* Link is up */
+#define LPFC_ATT_LINK_DOWN 0x02 /* Link is down */
+ uint32_t word3;
+#define lpfc_mbx_read_top_alpa_granted_SHIFT 24
+#define lpfc_mbx_read_top_alpa_granted_MASK 0x000000FF
+#define lpfc_mbx_read_top_alpa_granted_WORD word3
+#define lpfc_mbx_read_top_lip_alps_SHIFT 16
+#define lpfc_mbx_read_top_lip_alps_MASK 0x000000FF
+#define lpfc_mbx_read_top_lip_alps_WORD word3
+#define lpfc_mbx_read_top_lip_type_SHIFT 8
+#define lpfc_mbx_read_top_lip_type_MASK 0x000000FF
+#define lpfc_mbx_read_top_lip_type_WORD word3
+#define lpfc_mbx_read_top_topology_SHIFT 0
+#define lpfc_mbx_read_top_topology_MASK 0x000000FF
+#define lpfc_mbx_read_top_topology_WORD word3
+#define LPFC_TOPOLOGY_PT_PT 0x01 /* Topology is pt-pt / pt-fabric */
+#define LPFC_TOPOLOGY_LOOP 0x02 /* Topology is FC-AL */
+#define LPFC_TOPOLOGY_MM 0x05 /* maint mode zephtr to menlo */
+ /* store the LILP AL_PA position map into */
+ struct ulp_bde64 lilpBde64;
+#define LPFC_ALPA_MAP_SIZE 128
+ uint32_t word7;
+#define lpfc_mbx_read_top_ld_lu_SHIFT 31
+#define lpfc_mbx_read_top_ld_lu_MASK 0x00000001
+#define lpfc_mbx_read_top_ld_lu_WORD word7
+#define lpfc_mbx_read_top_ld_tf_SHIFT 30
+#define lpfc_mbx_read_top_ld_tf_MASK 0x00000001
+#define lpfc_mbx_read_top_ld_tf_WORD word7
+#define lpfc_mbx_read_top_ld_link_spd_SHIFT 8
+#define lpfc_mbx_read_top_ld_link_spd_MASK 0x000000FF
+#define lpfc_mbx_read_top_ld_link_spd_WORD word7
+#define lpfc_mbx_read_top_ld_nl_port_SHIFT 4
+#define lpfc_mbx_read_top_ld_nl_port_MASK 0x0000000F
+#define lpfc_mbx_read_top_ld_nl_port_WORD word7
+#define lpfc_mbx_read_top_ld_tx_SHIFT 2
+#define lpfc_mbx_read_top_ld_tx_MASK 0x00000003
+#define lpfc_mbx_read_top_ld_tx_WORD word7
+#define lpfc_mbx_read_top_ld_rx_SHIFT 0
+#define lpfc_mbx_read_top_ld_rx_MASK 0x00000003
+#define lpfc_mbx_read_top_ld_rx_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_read_top_lu_SHIFT 31
+#define lpfc_mbx_read_top_lu_MASK 0x00000001
+#define lpfc_mbx_read_top_lu_WORD word8
+#define lpfc_mbx_read_top_tf_SHIFT 30
+#define lpfc_mbx_read_top_tf_MASK 0x00000001
+#define lpfc_mbx_read_top_tf_WORD word8
+#define lpfc_mbx_read_top_link_spd_SHIFT 8
+#define lpfc_mbx_read_top_link_spd_MASK 0x000000FF
+#define lpfc_mbx_read_top_link_spd_WORD word8
+#define lpfc_mbx_read_top_nl_port_SHIFT 4
+#define lpfc_mbx_read_top_nl_port_MASK 0x0000000F
+#define lpfc_mbx_read_top_nl_port_WORD word8
+#define lpfc_mbx_read_top_tx_SHIFT 2
+#define lpfc_mbx_read_top_tx_MASK 0x00000003
+#define lpfc_mbx_read_top_tx_WORD word8
+#define lpfc_mbx_read_top_rx_SHIFT 0
+#define lpfc_mbx_read_top_rx_MASK 0x00000003
+#define lpfc_mbx_read_top_rx_WORD word8
+#define LPFC_LINK_SPEED_UNKNOWN 0x0
+#define LPFC_LINK_SPEED_1GHZ 0x04
+#define LPFC_LINK_SPEED_2GHZ 0x08
+#define LPFC_LINK_SPEED_4GHZ 0x10
+#define LPFC_LINK_SPEED_8GHZ 0x20
+#define LPFC_LINK_SPEED_10GHZ 0x40
+#define LPFC_LINK_SPEED_16GHZ 0x80
+};
/* Structure for MB Command CLEAR_LA (22) */
READ_LNK_VAR varRdLnk; /* cmd = 18 (READ_LNK_STAT) */
REG_LOGIN_VAR varRegLogin; /* cmd = 19 (REG_LOGIN(64)) */
UNREG_LOGIN_VAR varUnregLogin; /* cmd = 20 (UNREG_LOGIN) */
- READ_LA_VAR varReadLA; /* cmd = 21 (READ_LA(64)) */
CLEAR_LA_VAR varClearLA; /* cmd = 22 (CLEAR_LA) */
DUMP_VAR varDmp; /* Warm Start DUMP mbx cmd */
UNREG_D_ID_VAR varUnregDID; /* cmd = 0x23 (UNREG_D_ID) */
struct config_hbq_var varCfgHbq;/* cmd = 0x7c (CONFIG_HBQ) */
struct update_cfg_var varUpdateCfg; /* cmd = 0x1B (UPDATE_CFG)*/
CONFIG_PORT_VAR varCfgPort; /* cmd = 0x88 (CONFIG_PORT) */
+ struct lpfc_mbx_read_top varReadTop; /* cmd = 0x95 (READ_TOPOLOGY) */
REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */
UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */
ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */
#define lpfc_init_vfi_vf_SHIFT 29
#define lpfc_init_vfi_vf_MASK 0x00000001
#define lpfc_init_vfi_vf_WORD word1
+#define lpfc_init_vfi_vp_SHIFT 28
+#define lpfc_init_vfi_vp_MASK 0x00000001
+#define lpfc_init_vfi_vp_WORD word1
#define lpfc_init_vfi_vfi_SHIFT 0
#define lpfc_init_vfi_vfi_MASK 0x0000FFFF
#define lpfc_init_vfi_vfi_WORD word1
uint32_t word2;
+#define lpfc_init_vfi_vpi_SHIFT 16
+#define lpfc_init_vfi_vpi_MASK 0x0000FFFF
+#define lpfc_init_vfi_vpi_WORD word2
#define lpfc_init_vfi_fcfi_SHIFT 0
#define lpfc_init_vfi_fcfi_MASK 0x0000FFFF
#define lpfc_init_vfi_fcfi_WORD word2
#define LPFC_TRAILER_CODE_FCOE 0x2
#define LPFC_TRAILER_CODE_DCBX 0x3
#define LPFC_TRAILER_CODE_GRP5 0x5
+#define LPFC_TRAILER_CODE_FC 0x10
};
struct lpfc_acqe_link {
/* Get the default values for Model Name and Description */
lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
- if ((phba->cfg_link_speed > LINK_SPEED_10G)
- || ((phba->cfg_link_speed == LINK_SPEED_1G)
+ if ((phba->cfg_link_speed > LPFC_USER_LINK_SPEED_16G)
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_1G)
&& !(phba->lmt & LMT_1Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_2G)
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_2G)
&& !(phba->lmt & LMT_2Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_4G)
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_4G)
&& !(phba->lmt & LMT_4Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_8G)
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_8G)
&& !(phba->lmt & LMT_8Gb))
- || ((phba->cfg_link_speed == LINK_SPEED_10G)
- && !(phba->lmt & LMT_10Gb))) {
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G)
+ && !(phba->lmt & LMT_10Gb))
+ || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G)
+ && !(phba->lmt & LMT_16Gb))) {
/* Reset link speed to auto */
lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
"1302 Invalid speed for this board: "
"Reset link speed to auto: x%x\n",
phba->cfg_link_speed);
- phba->cfg_link_speed = LINK_SPEED_AUTO;
+ phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
}
phba->link_state = LPFC_LINK_DOWN;
mb = &pmb->u.mb;
pmb->vport = vport;
- lpfc_init_link(phba, pmb, phba->cfg_topology,
- phba->cfg_link_speed);
+ lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
lpfc_set_loopback_flag(phba);
rc = lpfc_sli_issue_mbox(phba, pmb, flag);
- if (rc != MBX_SUCCESS) {
+ if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0498 Adapter failed to init, mbxCmd x%x "
"INIT_LINK, mbxStatus x%x\n",
mb->mbxCommand, mb->mbxStatus);
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+ }
phba->link_state = LPFC_HBA_ERROR;
if (rc != MBX_BUSY || flag == MBX_POLL)
mempool_free(pmb, phba->mbox_mem_pool);
lpfc_els_flush_all_cmd(phba);
psli->slistat.link_event++;
- lpfc_read_la(phba, pmb, mp);
- pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
+ lpfc_read_topology(phba, pmb, mp);
+ pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
pmb->vport = vport;
/* Block ELS IOCBs until we have processed this mbox command */
phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
case LPFC_ASYNC_LINK_STATUS_DOWN:
case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
- att_type = AT_LINK_DOWN;
+ att_type = LPFC_ATT_LINK_DOWN;
break;
case LPFC_ASYNC_LINK_STATUS_UP:
/* Ignore physical link up events - wait for logical link up */
- att_type = AT_RESERVED;
+ att_type = LPFC_ATT_RESERVED;
break;
case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
- att_type = AT_LINK_UP;
+ att_type = LPFC_ATT_LINK_UP;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0399 Invalid link attention type: x%x\n",
bf_get(lpfc_acqe_link_status, acqe_link));
- att_type = AT_RESERVED;
+ att_type = LPFC_ATT_RESERVED;
break;
}
return att_type;
switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
case LPFC_ASYNC_LINK_SPEED_ZERO:
- link_speed = LA_UNKNW_LINK;
- break;
case LPFC_ASYNC_LINK_SPEED_10MBPS:
- link_speed = LA_UNKNW_LINK;
- break;
case LPFC_ASYNC_LINK_SPEED_100MBPS:
- link_speed = LA_UNKNW_LINK;
+ link_speed = LPFC_LINK_SPEED_UNKNOWN;
break;
case LPFC_ASYNC_LINK_SPEED_1GBPS:
- link_speed = LA_1GHZ_LINK;
+ link_speed = LPFC_LINK_SPEED_1GHZ;
break;
case LPFC_ASYNC_LINK_SPEED_10GBPS:
- link_speed = LA_10GHZ_LINK;
+ link_speed = LPFC_LINK_SPEED_10GHZ;
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0483 Invalid link-attention link speed: x%x\n",
bf_get(lpfc_acqe_link_speed, acqe_link));
- link_speed = LA_UNKNW_LINK;
+ link_speed = LPFC_LINK_SPEED_UNKNOWN;
break;
}
return link_speed;
}
/**
- * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * lpfc_sli4_async_link_evt - Process the asynchronous FC or FCoE link event
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
*
struct lpfc_dmabuf *mp;
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
- READ_LA_VAR *la;
+ struct lpfc_mbx_read_top *la;
uint8_t att_type;
+ int rc;
att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
- if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+ if (att_type != LPFC_ATT_LINK_DOWN && att_type != LPFC_ATT_LINK_UP)
return;
phba->fcoe_eventtag = acqe_link->event_tag;
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
/* Update link event statistics */
phba->sli.slistat.link_event++;
- /* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
- lpfc_read_la(phba, pmb, mp);
+ /* Create lpfc_handle_latt mailbox command from link ACQE */
+ lpfc_read_topology(phba, pmb, mp);
+ pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
pmb->vport = phba->pport;
- /* Parse and translate status field */
- mb = &pmb->u.mb;
- mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
-
- /* Parse and translate link attention fields */
- la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
- la->eventTag = acqe_link->event_tag;
- la->attType = att_type;
- la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
-
- /* Fake the the following irrelvant fields */
- la->topology = TOPOLOGY_PT_PT;
- la->granted_AL_PA = 0;
- la->il = 0;
- la->pb = 0;
- la->fa = 0;
- la->mm = 0;
-
/* Keep the link status for extra SLI4 state machine reference */
phba->sli4_hba.link_state.speed =
bf_get(lpfc_acqe_link_speed, acqe_link);
bf_get(lpfc_acqe_link_fault, acqe_link);
phba->sli4_hba.link_state.logical_speed =
bf_get(lpfc_acqe_qos_link_speed, acqe_link);
+ /*
+ * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
+ * topology info. Note: Optional for non FC-AL ports.
+ */
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED)
+ goto out_free_dmabuf;
+ return;
+ }
+ /*
+ * For FCoE Mode: fill in all the topology information we need and call
+ * the READ_TOPOLOGY completion routine to continue without actually
+ * sending the READ_TOPOLOGY mailbox command to the port.
+ */
+ /* Parse and translate status field */
+ mb = &pmb->u.mb;
+ mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+ /* Parse and translate link attention fields */
+ la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
+ la->eventTag = acqe_link->event_tag;
+ bf_set(lpfc_mbx_read_top_att_type, la, att_type);
+ bf_set(lpfc_mbx_read_top_link_spd, la,
+ lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
+
+ /* Fake the the following irrelvant fields */
+ bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
+ bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
+ bf_set(lpfc_mbx_read_top_il, la, 0);
+ bf_set(lpfc_mbx_read_top_pb, la, 0);
+ bf_set(lpfc_mbx_read_top_fa, la, 0);
+ bf_set(lpfc_mbx_read_top_mm, la, 0);
/* Invoke the lpfc_handle_latt mailbox command callback function */
- lpfc_mbx_cmpl_read_la(phba, pmb);
+ lpfc_mbx_cmpl_read_topology(phba, pmb);
return;
}
/**
- * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async fcoe completion queue entry.
*
* This routine is to handle the SLI4 asynchronous fcoe event.
**/
static void
-lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
- struct lpfc_acqe_fcoe *acqe_fcoe)
+lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_fcoe *acqe_fcoe)
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
/* Process the asynchronous event */
switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
case LPFC_TRAILER_CODE_LINK:
+ case LPFC_TRAILER_CODE_FC:
lpfc_sli4_async_link_evt(phba,
&cq_event->cqe.acqe_link);
break;
case LPFC_TRAILER_CODE_FCOE:
- lpfc_sli4_async_fcoe_evt(phba,
- &cq_event->cqe.acqe_fcoe);
+ lpfc_sli4_async_fip_evt(phba,
+ &cq_event->cqe.acqe_fcoe);
break;
case LPFC_TRAILER_CODE_DCBX:
lpfc_sli4_async_dcbx_evt(phba,
}
/**
- * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
+ * lpfc_read_topology - Prepare a mailbox command for reading HBA topology
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @mp: DMA buffer memory for reading the link attention information into.
*
- * The read link attention mailbox command is issued to read the Link Event
- * Attention information indicated by the HBA port when the Link Event bit
- * of the Host Attention (HSTATT) register is set to 1. A Link Event
+ * The read topology mailbox command is issued to read the link topology
+ * information indicated by the HBA port when the Link Event bit of the Host
+ * Attention (HSTATT) register is set to 1 (For SLI-3) or when an FC Link
+ * Attention ACQE is received from the port (For SLI-4). A Link Event
* Attention occurs based on an exception detected at the Fibre Channel link
* interface.
*
- * This routine prepares the mailbox command for reading HBA link attention
+ * This routine prepares the mailbox command for reading HBA link topology
* information. A DMA memory has been set aside and address passed to the
* HBA through @mp for the HBA to DMA link attention information into the
* memory as part of the execution of the mailbox command.
* 0 - Success (currently always return 0)
**/
int
-lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
+lpfc_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+ struct lpfc_dmabuf *mp)
{
MAILBOX_t *mb;
struct lpfc_sli *psli;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
INIT_LIST_HEAD(&mp->list);
- mb->mbxCommand = MBX_READ_LA64;
- mb->un.varReadLA.un.lilpBde64.tus.f.bdeSize = 128;
- mb->un.varReadLA.un.lilpBde64.addrHigh = putPaddrHigh(mp->phys);
- mb->un.varReadLA.un.lilpBde64.addrLow = putPaddrLow(mp->phys);
+ mb->mbxCommand = MBX_READ_TOPOLOGY;
+ mb->un.varReadTop.lilpBde64.tus.f.bdeSize = LPFC_ALPA_MAP_SIZE;
+ mb->un.varReadTop.lilpBde64.addrHigh = putPaddrHigh(mp->phys);
+ mb->un.varReadTop.lilpBde64.addrLow = putPaddrLow(mp->phys);
/* Save address for later completion and set the owner to host so that
* the FW knows this mailbox is available for processing.
*/
- pmb->context1 = (uint8_t *) mp;
+ pmb->context1 = (uint8_t *)mp;
mb->mbxOwner = OWN_HOST;
return (0);
}
vpd = &phba->vpd;
if (vpd->rev.feaLevelHigh >= 0x02){
switch(linkspeed){
- case LINK_SPEED_1G:
- case LINK_SPEED_2G:
- case LINK_SPEED_4G:
- case LINK_SPEED_8G:
- mb->un.varInitLnk.link_flags |=
- FLAGS_LINK_SPEED;
- mb->un.varInitLnk.link_speed = linkspeed;
+ case LPFC_USER_LINK_SPEED_1G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_1G;
+ break;
+ case LPFC_USER_LINK_SPEED_2G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_2G;
+ break;
+ case LPFC_USER_LINK_SPEED_4G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_4G;
+ break;
+ case LPFC_USER_LINK_SPEED_8G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_8G;
+ break;
+ case LPFC_USER_LINK_SPEED_10G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_10G;
+ break;
+ case LPFC_USER_LINK_SPEED_16G:
+ mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+ mb->un.varInitLnk.link_speed = LINK_SPEED_16G;
break;
- case LINK_SPEED_AUTO:
- default:
- mb->un.varInitLnk.link_speed =
- LINK_SPEED_AUTO;
+ case LPFC_USER_LINK_SPEED_AUTO:
+ default:
+ mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
break;
}
struct lpfc_mbx_init_vfi *init_vfi;
memset(mbox, 0, sizeof(*mbox));
+ mbox->vport = vport;
init_vfi = &mbox->u.mqe.un.init_vfi;
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
bf_set(lpfc_init_vfi_vr, init_vfi, 1);
bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+ bf_set(lpfc_init_vfi_vp, init_vfi, 1);
bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_init_vpi_vpi, init_vfi, vport->vpi + vport->phba->vpi_base);
bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
}
case MBX_READ_LNK_STAT:
case MBX_REG_LOGIN:
case MBX_UNREG_LOGIN:
- case MBX_READ_LA:
case MBX_CLEAR_LA:
case MBX_DUMP_MEMORY:
case MBX_DUMP_CONTEXT:
case MBX_READ_SPARM64:
case MBX_READ_RPI64:
case MBX_REG_LOGIN64:
- case MBX_READ_LA64:
+ case MBX_READ_TOPOLOGY:
case MBX_WRITE_WWN:
case MBX_SET_DEBUG:
case MBX_LOAD_EXP_ROM:
}
rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
- if (unlikely(rc))
- goto out_free_vpd;
-
+ if (unlikely(rc)) {
+ kfree(vpd);
+ goto out_free_mbox;
+ }
mqe = &mboxq->u.mqe;
phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
- phba->hba_flag |= HBA_FCOE_SUPPORT;
+ phba->hba_flag |= HBA_FCOE_MODE;
+ else
+ phba->hba_flag &= ~HBA_FCOE_MODE;
if (bf_get(lpfc_mbx_rd_rev_cee_ver, &mqe->un.read_rev) ==
LPFC_DCBX_CEE_MODE)
phba->hba_flag &= ~HBA_FIP_SUPPORT;
if (phba->sli_rev != LPFC_SLI_REV4 ||
- !(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+ !(phba->hba_flag & HBA_FCOE_MODE)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0376 READ_REV Error. SLI Level %d "
"FCoE enabled %d\n",
- phba->sli_rev, phba->hba_flag & HBA_FCOE_SUPPORT);
+ phba->sli_rev, phba->hba_flag & HBA_FCOE_MODE);
rc = -EIO;
- goto out_free_vpd;
+ kfree(vpd);
+ goto out_free_mbox;
}
/*
* Evaluate the read rev and vpd data. Populate the driver
"Using defaults.\n", rc);
rc = 0;
}
+ kfree(vpd);
/* Save information as VPD data */
phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
if (unlikely(rc)) {
rc = -EIO;
- goto out_free_vpd;
+ goto out_free_mbox;
}
/*
if (rc) {
phba->link_state = LPFC_HBA_ERROR;
rc = -ENOMEM;
- goto out_free_vpd;
+ goto out_free_mbox;
}
mboxq->vport = vport;
rc, bf_get(lpfc_mqe_status, mqe));
phba->link_state = LPFC_HBA_ERROR;
rc = -EIO;
- goto out_free_vpd;
+ goto out_free_mbox;
}
if (phba->cfg_soft_wwnn)
"0582 Error %d during sgl post operation\n",
rc);
rc = -ENODEV;
- goto out_free_vpd;
+ goto out_free_mbox;
}
/* Register SCSI SGL pool to the device */
/* Some Scsi buffers were moved to the abort scsi list */
/* A pci function reset will repost them */
rc = -ENODEV;
- goto out_free_vpd;
+ goto out_free_mbox;
}
/* Post the rpi header region to the device. */
"0393 Error %d during rpi post operation\n",
rc);
rc = -ENODEV;
- goto out_free_vpd;
+ goto out_free_mbox;
}
/* Set up all the queues to the device */
}
}
+ if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+ /*
+ * The FC Port needs to register FCFI (index 0)
+ */
+ lpfc_reg_fcfi(phba, mboxq);
+ mboxq->vport = phba->pport;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc == MBX_SUCCESS)
+ rc = 0;
+ else
+ goto out_unset_queue;
+ }
/*
* The port is ready, set the host's link state to LINK_DOWN
* in preparation for link interrupts.
*/
- lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
- mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
- lpfc_set_loopback_flag(phba);
- /* Change driver state to LPFC_LINK_DOWN right before init link */
spin_lock_irq(&phba->hbalock);
phba->link_state = LPFC_LINK_DOWN;
spin_unlock_irq(&phba->hbalock);
- rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
- if (unlikely(rc != MBX_NOT_FINISHED)) {
- kfree(vpd);
- return 0;
- } else
- rc = -EIO;
-
+ rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+out_unset_queue:
/* Unset all the queues set up in this routine when error out */
if (rc)
lpfc_sli4_queue_unset(phba);
-
out_stop_timers:
if (rc)
lpfc_stop_hba_timers(phba);
-out_free_vpd:
- kfree(vpd);
out_free_mbox:
mempool_free(mboxq, phba->mbox_mem_pool);
return rc;
/**
* lpfc_sli4_init_vpi - Initialize a vpi with the port
- * @phba: pointer to lpfc hba data structure.
- * @vpi: vpi value to activate with the port.
+ * @vport: Pointer to the vport for which the vpi is being initialized
*
- * This routine is invoked to activate a vpi with the
- * port when the host intends to use vports with a
- * nonzero vpi.
+ * This routine is invoked to activate a vpi with the port.
*
* Returns:
* 0 success
* -Evalue otherwise
**/
int
-lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+lpfc_sli4_init_vpi(struct lpfc_vport *vport)
{
LPFC_MBOXQ_t *mboxq;
int rc = 0;
int retval = MBX_SUCCESS;
uint32_t mbox_tmo;
-
- if (vpi == 0)
- return -EINVAL;
+ struct lpfc_hba *phba = vport->phba;
mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mboxq)
return -ENOMEM;
- lpfc_init_vpi(phba, mboxq, vpi);
+ lpfc_init_vpi(phba, mboxq, vport->vpi);
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
if (rc != MBX_SUCCESS) {
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_SLI,
"2022 INIT VPI Mailbox failed "
"status %d, mbxStatus x%x\n", rc,
bf_get(lpfc_mqe_status, &mboxq->u.mqe));
retval = -EIO;
}
if (rc != MBX_TIMEOUT)
- mempool_free(mboxq, phba->mbox_mem_pool);
+ mempool_free(mboxq, vport->phba->mbox_mem_pool);
return retval;
}
int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
-int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_init_vpi(struct lpfc_vport *);
uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
* by the port.
*/
if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (pport->fc_flag & FC_VFI_REGISTERED)) {
- rc = lpfc_sli4_init_vpi(phba, vpi);
+ (pport->fc_flag & FC_VFI_REGISTERED)) {
+ rc = lpfc_sli4_init_vpi(vport);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1838 Failed to INIT_VPI on vpi %d "
if ((phba->link_state < LPFC_LINK_UP) ||
(pport->port_state < LPFC_FABRIC_CFG_LINK) ||
- (phba->fc_topology == TOPOLOGY_LOOP)) {
+ (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
rc = VPORT_OK;
goto out;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
if ((phba->link_state < LPFC_LINK_UP) ||
- (phba->fc_topology == TOPOLOGY_LOOP)) {
+ (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
return VPORT_OK;
}
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
phba->link_state >= LPFC_LINK_UP &&
- phba->fc_topology != TOPOLOGY_LOOP) {
+ phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
if (vport->cfg_enable_da_id) {
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
projects / openwrt / staging / blogic.git / commitdiff