--- /dev/null
+From: Lennert Buytenhek <buytenh@wantstofly.org>
+Date: Fri, 20 Mar 2009 09:50:39 +0000 (+0000)
+Subject: dsa: add support for the Marvell 88E6095/6095F switch chips
+X-Git-Tag: v2.6.30-rc1~662^2~146
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=076d3e10a54caa2c148de5732c126c7a31381d48
+
+dsa: add support for the Marvell 88E6095/6095F switch chips
+
+Add support for the Marvell 88E6095/6095F switch chips. These
+chips are similar to the 88e6131, so we can add the support to
+mv88e6131.c easily.
+
+Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard
+Brouer <hawk@diku.dk> for testing various patches.
+
+Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
+Tested-by: Gary Thomas <gary@mlbassoc.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
+index 49211b3..c51b554 100644
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -41,13 +41,13 @@ config NET_DSA_MV88E6XXX_NEED_PPU
+ default n
+
+ config NET_DSA_MV88E6131
+- bool "Marvell 88E6131 ethernet switch chip support"
++ bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_MV88E6XXX_NEED_PPU
+ select NET_DSA_TAG_DSA
+ ---help---
+- This enables support for the Marvell 88E6131 ethernet switch
+- chip.
++ This enables support for the Marvell 88E6095/6095F/6131
++ ethernet switch chips.
+
+ config NET_DSA_MV88E6123_61_65
+ bool "Marvell 88E6123/6161/6165 ethernet switch chip support"
+diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
+index 70fae24..0029957 100644
+--- a/net/dsa/mv88e6131.c
++++ b/net/dsa/mv88e6131.c
+@@ -1,6 +1,6 @@
+ /*
+- * net/dsa/mv88e6131.c - Marvell 88e6131 switch chip support
+- * Copyright (c) 2008 Marvell Semiconductor
++ * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
++ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+@@ -21,6 +21,8 @@ static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ ret &= 0xfff0;
++ if (ret == 0x0950)
++ return "Marvell 88E6095/88E6095F";
+ if (ret == 0x1060)
+ return "Marvell 88E6131";
+ }
+@@ -36,7 +38,7 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
+ /*
+ * Set all ports to the disabled state.
+ */
+- for (i = 0; i < 8; i++) {
++ for (i = 0; i < 11; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+@@ -136,7 +138,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
+ * Clear all trunk masks.
+ */
+ for (i = 0; i < 8; i++)
+- REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
++ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
+
+ /*
+ * Clear all trunk mappings.
+@@ -159,9 +161,13 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
+
+ /*
+ * MAC Forcing register: don't force link, speed, duplex
+- * or flow control state to any particular values.
++ * or flow control state to any particular values on physical
++ * ports, but force the CPU port to 1000 Mb/s full duplex.
+ */
+- REG_WRITE(addr, 0x01, 0x0003);
++ if (p == ds->cpu_port)
++ REG_WRITE(addr, 0x01, 0x003e);
++ else
++ REG_WRITE(addr, 0x01, 0x0003);
+
+ /*
+ * Port Control: disable Core Tag, disable Drop-on-Lock,
+@@ -268,7 +274,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
+ if (ret < 0)
+ return ret;
+
+- for (i = 0; i < 6; i++) {
++ for (i = 0; i < 11; i++) {
+ ret = mv88e6131_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+@@ -279,7 +285,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
+
+ static int mv88e6131_port_to_phy_addr(int port)
+ {
+- if (port >= 0 && port != 3 && port <= 7)
++ if (port >= 0 && port <= 11)
+ return port;
+ return -1;
+ }