ACPI / LPSS: Take I2C host controllers out of reset

On Intel Baytrail, some I2C host controllers are held in reset when the OS
gets control. This causes the driver to fail to detect the hardware
properly.

Fix this so that we make sure that the I2C host controller is not in reset
when the driver gets probe'd.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 63407d264885a200db03d8b152d53efcfae13cbe..9cb65b0e7597287531144d876d9eaed132ae7b5a 100644 (file)
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -34,6 +34,9 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 /* Offsets relative to LPSS_PRIVATE_OFFSET */
 #define LPSS_CLK_DIVIDER_DEF_MASK      (BIT(1) | BIT(16))
+#define LPSS_RESETS                    0x04
+#define LPSS_RESETS_RESET_FUNC         BIT(0)
+#define LPSS_RESETS_RESET_APB          BIT(1)
 #define LPSS_GENERAL                   0x08
 #define LPSS_GENERAL_LTR_MODE_SW       BIT(2)
 #define LPSS_GENERAL_UART_RTS_OVRD     BIT(3)
@@ -99,6 +102,17 @@ static void lpss_uart_setup(struct lpss_private_data *pdata)
        writel(reg | LPSS_GENERAL_UART_RTS_OVRD, pdata->mmio_base + offset);
 }
 
+static void lpss_i2c_setup(struct lpss_private_data *pdata)
+{
+       unsigned int offset;
+       u32 val;
+
+       offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
+       val = readl(pdata->mmio_base + offset);
+       val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
+       writel(val, pdata->mmio_base + offset);
+}
+
 static struct lpss_device_desc lpt_dev_desc = {
        .clk_required = true,
        .prv_offset = 0x800,
@@ -171,6 +185,7 @@ static struct lpss_device_desc byt_i2c_dev_desc = {
        .prv_offset = 0x800,
        .save_ctx = true,
        .shared_clock = &i2c_clock,
+       .setup = lpss_i2c_setup,
 };
 
 #else