mtd: Remove now-defunct ts7250 nand driver
authorH Hartley Sweeten <hartleys@visionengravers.com>
Tue, 5 Jan 2010 21:59:58 +0000 (14:59 -0700)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Wed, 6 Jan 2010 13:24:36 +0000 (13:24 +0000)
The ts72xx platform has been updated to use the generic platform nand
driver (plat_nand.c).  This removes the now-defunct ts7250.c nand driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Cc: Jesse Off <joff@embeddedARM.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
arch/arm/mach-ep93xx/include/mach/ts72xx.h
drivers/mtd/nand/Kconfig
drivers/mtd/nand/Makefile
drivers/mtd/nand/ts7250.c [deleted file]

index 3bd934e9a7f1b8df9a2bbdb6e7753edfd0532af8..61c0e132c63e05a034bd5491756840dbfb84cfab 100644 (file)
@@ -9,9 +9,6 @@
  * febff000    22000000        4K      model number register
  * febfe000    22400000        4K      options register
  * febfd000    22800000        4K      options register #2
- * febfc000    [67]0000000     4K      NAND data register
- * febfb000    [67]0400000     4K      NAND control register
- * febfa000    [67]0800000     4K      NAND busy register
  * febf9000    10800000        4K      TS-5620 RTC index register
  * febf8000    11700000        4K      TS-5620 RTC data register
  */
 #define TS72XX_OPTIONS2_TS9420_BOOT    0x02
 
 
-#define TS72XX_NAND1_DATA_PHYS_BASE    0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE    0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE     0xfebfc000
-#define TS72XX_NAND_DATA_SIZE          0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE  0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE       0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE    0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE    0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE     0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE          0x00001000
-
-
 #define TS72XX_RTC_INDEX_VIRT_BASE     0xfebf9000
 #define TS72XX_RTC_INDEX_PHYS_BASE     0x10800000
 #define TS72XX_RTC_INDEX_SIZE          0x00001000
index 2dcbccb50da74a4b03c89068874df0774e97a9e5..318ef2f2194ff0569cf6d5b1e97677e62267f8fc 100644 (file)
@@ -95,12 +95,6 @@ config MTD_NAND_OMAP_PREFETCH_DMA
         or in DMA interrupt mode.
         Say y for DMA mode or MPU mode will be used
 
-config MTD_NAND_TS7250
-       tristate "NAND Flash device on TS-7250 board"
-       depends on MACH_TS72XX
-       help
-         Support for NAND flash on Technologic Systems TS-7250 platform.
-
 config MTD_NAND_IDS
        tristate
 
index bba5addadb95d3cd64b90a7e17fc938b6bfb7162..355786846bc9670e2acc793e304f26e1d6fb4bb1 100644 (file)
@@ -19,7 +19,6 @@ obj-$(CONFIG_MTD_NAND_DISKONCHIP)     += diskonchip.o
 obj-$(CONFIG_MTD_NAND_H1900)           += h1910.o
 obj-$(CONFIG_MTD_NAND_RTC_FROM4)       += rtc_from4.o
 obj-$(CONFIG_MTD_NAND_SHARPSL)         += sharpsl.o
-obj-$(CONFIG_MTD_NAND_TS7250)          += ts7250.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)         += nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)          += cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)            += ndfc.o
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
deleted file mode 100644 (file)
index 0f5562a..0000000
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * drivers/mtd/nand/ts7250.c
- *
- * Copyright (C) 2004 Technologic Systems (support@embeddedARM.com)
- *
- * Derived from drivers/mtd/nand/edb7312.c
- *   Copyright (C) 2004 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- *   Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- *   This is a device driver for the NAND flash device found on the
- *   TS-7250 board which utilizes a Samsung 32 Mbyte part.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/ts72xx.h>
-
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-
-/*
- * MTD structure for TS7250 board
- */
-static struct mtd_info *ts7250_mtd = NULL;
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-#define NUM_PARTITIONS 3
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info32[] = {
-       {
-               .name           = "TS-BOOTROM",
-               .offset         = 0x00000000,
-               .size           = 0x00004000,
-       }, {
-               .name           = "Linux",
-               .offset         = 0x00004000,
-               .size           = 0x01d00000,
-       }, {
-               .name           = "RedBoot",
-               .offset         = 0x01d04000,
-               .size           = 0x002fc000,
-       },
-};
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info128[] = {
-       {
-               .name           = "TS-BOOTROM",
-               .offset         = 0x00000000,
-               .size           = 0x00004000,
-       }, {
-               .name           = "Linux",
-               .offset         = 0x00004000,
-               .size           = 0x07d00000,
-       }, {
-               .name           = "RedBoot",
-               .offset         = 0x07d04000,
-               .size           = 0x002fc000,
-       },
-};
-#endif
-
-
-/*
- *     hardware specific access to control-lines
- *
- *     ctrl:
- *     NAND_NCE: bit 0 -> bit 2
- *     NAND_CLE: bit 1 -> bit 1
- *     NAND_ALE: bit 2 -> bit 0
- */
-static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-       struct nand_chip *chip = mtd->priv;
-
-       if (ctrl & NAND_CTRL_CHANGE) {
-               unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE;
-               unsigned char bits;
-
-               bits = (ctrl & NAND_NCE) << 2;
-               bits |= ctrl & NAND_CLE;
-               bits |= (ctrl & NAND_ALE) >> 2;
-
-               __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr);
-       }
-
-       if (cmd != NAND_CMD_NONE)
-               writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- *     read device ready pin
- */
-static int ts7250_device_ready(struct mtd_info *mtd)
-{
-       return __raw_readb(TS72XX_NAND_BUSY_VIRT_BASE) & 0x20;
-}
-
-/*
- * Main initialization routine
- */
-static int __init ts7250_init(void)
-{
-       struct nand_chip *this;
-       const char *part_type = 0;
-       int mtd_parts_nb = 0;
-       struct mtd_partition *mtd_parts = 0;
-
-       if (!machine_is_ts72xx() || board_is_ts7200())
-               return -ENXIO;
-
-       /* Allocate memory for MTD device structure and private data */
-       ts7250_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-       if (!ts7250_mtd) {
-               printk("Unable to allocate TS7250 NAND MTD device structure.\n");
-               return -ENOMEM;
-       }
-
-       /* Get pointer to private data */
-       this = (struct nand_chip *)(&ts7250_mtd[1]);
-
-       /* Initialize structures */
-       memset(ts7250_mtd, 0, sizeof(struct mtd_info));
-       memset(this, 0, sizeof(struct nand_chip));
-
-       /* Link the private data with the MTD structure */
-       ts7250_mtd->priv = this;
-       ts7250_mtd->owner = THIS_MODULE;
-
-       /* insert callbacks */
-       this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE;
-       this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE;
-       this->cmd_ctrl = ts7250_hwcontrol;
-       this->dev_ready = ts7250_device_ready;
-       this->chip_delay = 15;
-       this->ecc.mode = NAND_ECC_SOFT;
-
-       printk("Searching for NAND flash...\n");
-       /* Scan to find existence of the device */
-       if (nand_scan(ts7250_mtd, 1)) {
-               kfree(ts7250_mtd);
-               return -ENXIO;
-       }
-#ifdef CONFIG_MTD_PARTITIONS
-       ts7250_mtd->name = "ts7250-nand";
-       mtd_parts_nb = parse_mtd_partitions(ts7250_mtd, part_probes, &mtd_parts, 0);
-       if (mtd_parts_nb > 0)
-               part_type = "command line";
-       else
-               mtd_parts_nb = 0;
-#endif
-       if (mtd_parts_nb == 0) {
-               mtd_parts = partition_info32;
-               if (ts7250_mtd->size >= (128 * 0x100000))
-                       mtd_parts = partition_info128;
-               mtd_parts_nb = NUM_PARTITIONS;
-               part_type = "static";
-       }
-
-       /* Register the partitions */
-       printk(KERN_NOTICE "Using %s partition definition\n", part_type);
-       add_mtd_partitions(ts7250_mtd, mtd_parts, mtd_parts_nb);
-
-       /* Return happy */
-       return 0;
-}
-
-module_init(ts7250_init);
-
-/*
- * Clean up routine
- */
-static void __exit ts7250_cleanup(void)
-{
-       /* Unregister the device */
-       del_mtd_device(ts7250_mtd);
-
-       /* Free the MTD device structure */
-       kfree(ts7250_mtd);
-}
-
-module_exit(ts7250_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jesse Off <joff@embeddedARM.com>");
-MODULE_DESCRIPTION("MTD map driver for Technologic Systems TS-7250 board");