--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9200
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
+chipsets. LEDs will be hopefully added later to the DT.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++++++++++++++++++++
+ 2 files changed, 43 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm47081-luxul-xwr-1200.dtb \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
++ bcm4709-linksys-ea9200.dtb \
+ bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r8000.dtb \
+ bcm4709-tplink-archer-c9-v1.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -0,0 +1,42 @@
++/*
++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4709.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
++ model = "Linksys EA9200";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
+wireless chipsets. LEDs will be hopefully added later to the DT.
+According to some sources it may use the same board as EA6400 and just
+differ by an original vendor firmware.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
+ 2 files changed, 42 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
++ bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-luxul-xap-1510.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
+ bcm4708-netgear-r6250.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -0,0 +1,41 @@
++/*
++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "linksys,ea6300-v1", "brcm,bcm4708";
++ model = "Linksys EA6300 V1";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-asus-rt-ac87u.dtb \
+@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-linksys-ea9200.dtb \
bcm4709-netgear-r7000.dtb \
+ bcm4709-netgear-r7900.dtb \
bcm4709-netgear-r8000.dtb \
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-linksys-ea6300-v1.dtb \
- bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -0,0 +1,48 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Linksys EA6300 V1
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea6300v1", "brcm,bcm4708";
-+ model = "Linksys EA6300 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
projects / openwrt / staging / yousong.git / commitdiff