ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device

[juhosg:
  - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
  - wrap long lines in mach-ubnt-xm
  - remove default network config, set it from uci-defaults/network
    instead
  - remove user-space, and image generation stuff]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196

diff --git a/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch b/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch
new file mode 100644 (file)
index 0000000..8a1c770
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.3/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -170,6 +170,19 @@ static struct gpio_led ubnt_unifi_leds_g
+       }
+ };
+ 
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:orange:front",
++              .gpio           = 1,
++              .active_low     = 0,
++      }, {
++              .name           = "ubnt:green:front",
++              .gpio           = 0,
++              .active_low     = 0,
++      }
++};
++
++
+ static void __init ubnt_unifi_setup(void)
+ {
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+@@ -194,3 +207,33 @@ static void __init ubnt_unifi_setup(void
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
+            ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK      BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK      (BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++                               UBNT_UNIFIOD_2ND_PHYMASK));
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++      ath79_register_eth(0);
++      ath79_register_eth(1);
++
++      ap91_pci_init(ee, NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++                               ubnt_unifi_outdoor_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++           "Ubiquiti UniFiAP Outdoor",
++           ubnt_unifi_outdoor_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -97,6 +97,7 @@ enum ath79_mach_type {
+       ATH79_MACH_UBNT_RSPRO,          /* Ubiquiti RouterStation Pro */
+       ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */
+       ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
++      ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+       ATH79_MACH_WHR_G301N,           /* Buffalo WHR-G301N */
+       ATH79_MACH_WHR_HP_G300N,        /* Buffalo WHR-HP-G300N */

diff --git a/target/linux/ar71xx/patches-3.6/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch b/target/linux/ar71xx/patches-3.6/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch
new file mode 100644 (file)
index 0000000..8a1c770
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.6/613-MIPS-ath79-ubnt-xm-add-unifi-outdoor.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -170,6 +170,19 @@ static struct gpio_led ubnt_unifi_leds_g
+       }
+ };
+ 
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++      {
++              .name           = "ubnt:orange:front",
++              .gpio           = 1,
++              .active_low     = 0,
++      }, {
++              .name           = "ubnt:green:front",
++              .gpio           = 0,
++              .active_low     = 0,
++      }
++};
++
++
+ static void __init ubnt_unifi_setup(void)
+ {
+       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+@@ -194,3 +207,33 @@ static void __init ubnt_unifi_setup(void
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
+            ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK      BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK      (BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++      u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++      u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++      u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++                               UBNT_UNIFIOD_2ND_PHYMASK));
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++      ath79_register_eth(0);
++      ath79_register_eth(1);
++
++      ap91_pci_init(ee, NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++                               ubnt_unifi_outdoor_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++           "Ubiquiti UniFiAP Outdoor",
++           ubnt_unifi_outdoor_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -97,6 +97,7 @@ enum ath79_mach_type {
+       ATH79_MACH_UBNT_RSPRO,          /* Ubiquiti RouterStation Pro */
+       ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */
+       ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
++      ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
+       ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+       ATH79_MACH_WHR_G301N,           /* Buffalo WHR-G301N */
+       ATH79_MACH_WHR_HP_G300N,        /* Buffalo WHR-HP-G300N */