Delete unused loopback configuration functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21205/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
return result;
}
-
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal,
- int enable_external)
-{
- int interface = cvmx_helper_get_interface_num(ipd_port);
- int index = cvmx_helper_get_interface_index_num(ipd_port);
- int original_enable;
- union cvmx_gmxx_prtx_cfg gmx_cfg;
- union cvmx_asxx_prt_loop asxx_prt_loop;
-
- /* Read the current enable state and save it */
- gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
- original_enable = gmx_cfg.s.en;
- /* Force port to be disabled */
- gmx_cfg.s.en = 0;
- if (enable_internal) {
- /* Force speed if we're doing internal loopback */
- gmx_cfg.s.duplex = 1;
- gmx_cfg.s.slottime = 1;
- gmx_cfg.s.speed = 1;
- cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1);
- cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200);
- cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000);
- }
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
-
- /* Set the loopback bits */
- asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface));
- if (enable_internal)
- asxx_prt_loop.s.int_loop |= 1 << index;
- else
- asxx_prt_loop.s.int_loop &= ~(1 << index);
- if (enable_external)
- asxx_prt_loop.s.ext_loop |= 1 << index;
- else
- asxx_prt_loop.s.ext_loop &= ~(1 << index);
- cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64);
-
- /* Force enables in internal loopback */
- if (enable_internal) {
- uint64_t tmp;
- tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface));
- cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface),
- (1 << index) | tmp);
- tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface));
- cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface),
- (1 << index) | tmp);
- original_enable = 1;
- }
-
- /* Restore the enable state */
- gmx_cfg.s.en = original_enable;
- cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
- return 0;
-}
return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index,
link_info);
}
-
-/**
- * Configure a port for internal and/or external loopback. Internal
- * loopback causes packets sent by the port to be received by
- * Octeon. External loopback causes packets received from the wire to
- * sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-int __cvmx_helper_sgmii_configure_loopback(int ipd_port, int enable_internal,
- int enable_external)
-{
- int interface = cvmx_helper_get_interface_num(ipd_port);
- int index = cvmx_helper_get_interface_index_num(ipd_port);
- union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg;
- union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg;
-
- pcsx_mrx_control_reg.u64 =
- cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface));
- pcsx_mrx_control_reg.s.loopbck1 = enable_internal;
- cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface),
- pcsx_mrx_control_reg.u64);
-
- pcsx_miscx_ctl_reg.u64 =
- cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface));
- pcsx_miscx_ctl_reg.s.loopbck2 = enable_external;
- cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
- pcsx_miscx_ctl_reg.u64);
-
- __cvmx_helper_sgmii_hardware_init_link(interface, index);
- return 0;
-}
/* Bring the link up */
return __cvmx_helper_xaui_enable(interface);
}
-
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-extern int __cvmx_helper_xaui_configure_loopback(int ipd_port,
- int enable_internal,
- int enable_external)
-{
- int interface = cvmx_helper_get_interface_num(ipd_port);
- union cvmx_pcsxx_control1_reg pcsxx_control1_reg;
- union cvmx_gmxx_xaui_ext_loopback gmxx_xaui_ext_loopback;
-
- /* Set the internal loop */
- pcsxx_control1_reg.u64 =
- cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface));
- pcsxx_control1_reg.s.loopbck1 = enable_internal;
- cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface),
- pcsxx_control1_reg.u64);
-
- /* Set the external loop */
- gmxx_xaui_ext_loopback.u64 =
- cvmx_read_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface));
- gmxx_xaui_ext_loopback.s.en = enable_external;
- cvmx_write_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface),
- gmxx_xaui_ext_loopback.u64);
-
- /* Take the link through a reset */
- return __cvmx_helper_xaui_enable(interface);
-}
return result;
}
EXPORT_SYMBOL_GPL(cvmx_helper_link_set);
-
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
- int enable_external)
-{
- int result = -1;
- int interface = cvmx_helper_get_interface_num(ipd_port);
- int index = cvmx_helper_get_interface_index_num(ipd_port);
-
- if (index >= cvmx_helper_ports_on_interface(interface))
- return -1;
-
- switch (cvmx_helper_interface_get_mode(interface)) {
- case CVMX_HELPER_INTERFACE_MODE_DISABLED:
- case CVMX_HELPER_INTERFACE_MODE_PCIE:
- case CVMX_HELPER_INTERFACE_MODE_SPI:
- case CVMX_HELPER_INTERFACE_MODE_NPI:
- case CVMX_HELPER_INTERFACE_MODE_LOOP:
- break;
- case CVMX_HELPER_INTERFACE_MODE_XAUI:
- result =
- __cvmx_helper_xaui_configure_loopback(ipd_port,
- enable_internal,
- enable_external);
- break;
- case CVMX_HELPER_INTERFACE_MODE_RGMII:
- case CVMX_HELPER_INTERFACE_MODE_GMII:
- result =
- __cvmx_helper_rgmii_configure_loopback(ipd_port,
- enable_internal,
- enable_external);
- break;
- case CVMX_HELPER_INTERFACE_MODE_SGMII:
- case CVMX_HELPER_INTERFACE_MODE_PICMG:
- result =
- __cvmx_helper_sgmii_configure_loopback(ipd_port,
- enable_internal,
- enable_external);
- break;
- }
- return result;
-}
struct cvmx_gmxx_tx_xaui_ctl_s cnf71xx;
};
-union cvmx_gmxx_xaui_ext_loopback {
- uint64_t u64;
- struct cvmx_gmxx_xaui_ext_loopback_s {
-#ifdef __BIG_ENDIAN_BITFIELD
- uint64_t reserved_5_63:59;
- uint64_t en:1;
- uint64_t thresh:4;
-#else
- uint64_t thresh:4;
- uint64_t en:1;
- uint64_t reserved_5_63:59;
-#endif
- } s;
- struct cvmx_gmxx_xaui_ext_loopback_s cn52xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn52xxp1;
- struct cvmx_gmxx_xaui_ext_loopback_s cn56xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn56xxp1;
- struct cvmx_gmxx_xaui_ext_loopback_s cn61xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn63xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn63xxp1;
- struct cvmx_gmxx_xaui_ext_loopback_s cn66xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn68xx;
- struct cvmx_gmxx_xaui_ext_loopback_s cn68xxp1;
- struct cvmx_gmxx_xaui_ext_loopback_s cnf71xx;
-};
-
#endif
extern int __cvmx_helper_rgmii_link_set(int ipd_port,
cvmx_helper_link_info_t link_info);
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-extern int __cvmx_helper_rgmii_configure_loopback(int ipd_port,
- int enable_internal,
- int enable_external);
-
#endif
extern int __cvmx_helper_sgmii_link_set(int ipd_port,
cvmx_helper_link_info_t link_info);
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-extern int __cvmx_helper_sgmii_configure_loopback(int ipd_port,
- int enable_internal,
- int enable_external);
-
#endif
extern int __cvmx_helper_xaui_link_set(int ipd_port,
cvmx_helper_link_info_t link_info);
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-extern int __cvmx_helper_xaui_configure_loopback(int ipd_port,
- int enable_internal,
- int enable_external);
#endif
extern int cvmx_helper_interface_probe(int interface);
extern int cvmx_helper_interface_enumerate(int interface);
-/**
- * Configure a port for internal and/or external loopback. Internal loopback
- * causes packets sent by the port to be received by Octeon. External loopback
- * causes packets received from the wire to sent out again.
- *
- * @ipd_port: IPD/PKO port to loopback.
- * @enable_internal:
- * Non zero if you want internal loopback
- * @enable_external:
- * Non zero if you want external loopback
- *
- * Returns Zero on success, negative on failure.
- */
-extern int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
- int enable_external);
-
#endif /* __CVMX_HELPER_H__ */