+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_EXYNOS4 is not set
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-# CONFIG_ARCH_VT8500 is not set
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-# CONFIG_ARPD is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="console=ttyAM0,57600 init=/etc/preinit"
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRUNCH=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-CONFIG_EP93XX_ETH=y
-CONFIG_EP93XX_SDCE0_PHYS_OFFSET=y
-# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET is not set
-CONFIG_EP93XX_WATCHDOG=y
-CONFIG_FB=y
-# CONFIG_FB_ARMCLCD is not set
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_EP93XX=y
-# CONFIG_FB_SM7XX is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FW_LOADER is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_PXA_PCI is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INOTIFY_USER=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_KTIME_SCALAR=y
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_MACH_EDB9302A is not set
-# CONFIG_MACH_EDB9307A is not set
-# CONFIG_MACH_EDB9315A is not set
-CONFIG_MACH_NO_WESTBRIDGE=y
-CONFIG_MACH_SIM_ONE=y
-# CONFIG_MACH_SNAPPER_CL15 is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SPI=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_EP93XX=y
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_PL022 is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-CONFIG_TOUCHSCREEN_EP93XX=y
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-CONFIG_UID16=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_XZ_DEC=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
----
- arch/arm/mach-ep93xx/include/mach/hardware.h | 1
- arch/arm/mach-ep93xx/include/mach/regs_touch.h | 95 ++
- drivers/input/touchscreen/Kconfig | 5
- drivers/input/touchscreen/Makefile | 1
- drivers/input/touchscreen/ep93xx_ts.c | 1117 +++++++++++++++++++++++++
- drivers/input/touchscreen/ep93xx_ts.h | 53 +
- 6 files changed, 1272 insertions(+)
-
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -177,6 +177,15 @@ config TOUCHSCREEN_EETI
- To compile this driver as a module, choose M here: the
- module will be called eeti_ts.
-
-+config TOUCHSCREEN_EP93XX
-+ tristate "EP93xx Touchscreen"
-+ depends on ARM && INPUT && ARCH_EP93XX
-+ help
-+ Say Y here to enable support for EP93xx touch screen.
-+
-+ To compile this driver as a module, choose M here:
-+ the module will be called ep93xx_ts.
-+
- config TOUCHSCREEN_FUJITSU
- tristate "Fujitsu serial touchscreen"
- select SERIO
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += h
- obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
- obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
- obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
-+obj-$(CONFIG_TOUCHSCREEN_EP93XX) += ep93xx_ts.o
- obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
- obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
- obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
---- /dev/null
-+++ b/drivers/input/touchscreen/ep93xx_ts.c
-@@ -0,0 +1,1021 @@
-+/*
-+ * linux/drivers/input/touchscreen/ep93xx_ts.c
-+ *
-+ * Copyright (C) 2003-2004 Cirrus Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/wait.h>
-+#include <linux/fs.h>
-+#include <linux/sched.h>
-+#include <linux/poll.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/compiler.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/syscalls.h>
-+#include <linux/input.h>
-+#include <linux/semaphore.h>
-+#include <asm/irq.h>
-+#include <mach/hardware.h>
-+#include <asm/io.h>
-+
-+/* This stuff should be in ep93xx-regs.h */
-+#define EP93XX_TOUCHSCREEN_REG(x) (EP93XX_TOUCHSCREEN_BASE + (x))
-+/* R/W touchscreen controller setup control register. */
-+#define EP93XX_TOUCHSCREEN_SETUP EP93XX_TOUCHSCREEN_REG(0x00)
-+/* R/W touchscreen controller max/min register. */
-+#define EP93XX_TOUCHSCREEN_XYMAXMIN EP93XX_TOUCHSCREEN_REG(0x04)
-+/* R touchscreen controller result register. */
-+#define EP93XX_TOUCHSCREEN_XYRESULT EP93XX_TOUCHSCREEN_REG(0x08)
-+/* LOCKED R/W touchscreen Switch Matrix control register. */
-+#define EP93XX_TOUCHSCREEN_DISCHARGE EP93XX_TOUCHSCREEN_REG(0x0C)
-+#define EP93XX_TOUCHSCREEN_XSAMPLE EP93XX_TOUCHSCREEN_REG(0x10)
-+#define EP93XX_TOUCHSCREEN_YSAMPLE EP93XX_TOUCHSCREEN_REG(0x14)
-+#define EP93XX_TOUCHSCREEN_DIRECT EP93XX_TOUCHSCREEN_REG(0x18)
-+#define EP93XX_TOUCHSCREEN_DETECT EP93XX_TOUCHSCREEN_REG(0x1C)
-+/* NA R/W touchscreen software lock register. */
-+#define EP93XX_TOUCHSCREEN_SWLOCK EP93XX_TOUCHSCREEN_REG(0x20)
-+/* R/W touchscreen setup control register #2. */
-+#define EP93XX_TOUCHSCREEN_SETUP2 EP93XX_TOUCHSCREEN_REG(0x24)
-+
-+/* These are duplicated in mach-ep93xx/core.c */
-+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
-+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
-+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
-+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
-+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
-+
-+/*
-+ * Register bit definitions
-+ */
-+#define TSSETUP_SDLY_MASK 0x000003FF
-+#define TSSETUP_SDLY_SHIFT 0
-+#define TSSETUP_NSMP_4 0x00000000
-+#define TSSETUP_NSMP_8 0x00000400
-+#define TSSETUP_NSMP_16 0x00000800
-+#define TSSETUP_NSMP_32 0x00000C00
-+#define TSSETUP_NSMP_MASK 0x00000C00
-+#define TSSETUP_DEV_4 0x00000000
-+#define TSSETUP_DEV_8 0x00001000
-+#define TSSETUP_DEV_12 0x00002000
-+#define TSSETUP_DEV_16 0x00003000
-+#define TSSETUP_DEV_24 0x00004000
-+#define TSSETUP_DEV_32 0x00005000
-+#define TSSETUP_DEV_64 0x00006000
-+#define TSSETUP_DEV_128 0x00007000
-+#define TSSETUP_ENABLE 0x00008000
-+#define TSSETUP_DLY_MASK 0x03FF0000
-+#define TSSETUP_DLY_SHIFT 16
-+#define TSSETUP_TDTCT 0x80000000
-+
-+#define TSMAXMIN_XMIN_MASK 0x000000FF
-+#define TSMAXMIN_XMIN_SHIFT 0
-+#define TSMAXMIN_YMIN_MASK 0x0000FF00
-+#define TSMAXMIN_YMIN_SHIFT 8
-+#define TSMAXMIN_XMAX_MASK 0x00FF0000
-+#define TSMAXMIN_XMAX_SHIFT 16
-+#define TSMAXMIN_YMAX_MASK 0xFF000000
-+#define TSMAXMIN_YMAX_SHIFT 24
-+
-+#define TSXYRESULT_X_MASK 0x00000FFF
-+#define TSXYRESULT_X_SHIFT 0
-+#define TSXYRESULT_AD_MASK 0x0000FFFF
-+#define TSXYRESULT_AD_SHIFT 0
-+#define TSXYRESULT_Y_MASK 0x0FFF0000
-+#define TSXYRESULT_Y_SHIFT 16
-+#define TSXYRESULT_SDR 0x80000000
-+
-+#define TSX_SAMPLE_MASK 0x00003FFF
-+#define TSX_SAMPLE_SHIFT 0x00
-+#define TSY_SAMPLE_MASK 0x3FFF0000
-+#define TSY_SAMPLE_SHIFT 0x10
-+
-+#define TSSETUP2_TINT 0x00000001
-+#define TSSETUP2_NICOR 0x00000002
-+#define TSSETUP2_PINT 0x00000004
-+#define TSSETUP2_PENSTS 0x00000008
-+#define TSSETUP2_PINTEN 0x00000010
-+#define TSSETUP2_DEVINT 0x00000020
-+#define TSSETUP2_DINTEN 0x00000040
-+#define TSSETUP2_DTMEN 0x00000080
-+#define TSSETUP2_DISDEV 0x00000100
-+#define TSSETUP2_NSIGND 0x00000200
-+#define TSSETUP2_S28EN 0x00000400
-+#define TSSETUP2_RINTEN 0x00000800
-+
-+#define TSXYRESULT_SDR 0x80000000
-+
-+/*
-+ * These are used as trigger levels to know when we have pen up/down.
-+ * The rules:
-+ * 1. TS_HEAVY_INV_PRESSURE < TS_LIGHT_INV_PRESSURE because these
-+ * are Inverse pressure.
-+ * 2. Any touch lighter than TS_LIGHT_INV_PRESSURE is a pen up.
-+ * 3. Any touch heavier than TS_HEAVY_INV_PRESSURE is a pen down.
-+ */
-+#define TS_HEAVY_INV_PRESSURE 0xFE0 /* C00 */
-+#define TS_LIGHT_INV_PRESSURE 0xFFF /* e00 */
-+
-+/*
-+ * If the x, y, or inverse pressure changes more than these values
-+ * between two succeeding points, the point is not reported.
-+ */
-+#define TS_MAX_VALID_XY_CHANGE 0x300
-+#define TS_MAX_VALID_PRESSURE_CHANGE 0x100
-+
-+/*
-+ * This is the minimum Z1 Value that is valid.
-+ */
-+#define MIN_Z1_VALUE 0x50
-+
-+/*
-+ * Settling delay for taking each ADC measurement. Increase this
-+ * if ts is jittery.
-+ */
-+#define EP93XX_TS_ADC_DELAY_USEC 2000
-+
-+/*
-+ * Delay between TS points.
-+ */
-+#define EP93XX_TS_PER_POINT_DELAY_USEC 10000
-+
-+/*
-+ * A few more macros...
-+ */
-+#define TSSETUP_DEFAULT (TSSETUP_NSMP_32 | TSSETUP_DEV_64 | \
-+ ((128<<TSSETUP_SDLY_SHIFT) & TSSETUP_SDLY_MASK) | \
-+ ((128<<TSSETUP_DLY_SHIFT) & TSSETUP_DLY_MASK))
-+
-+#define TSSETUP2_DEFAULT (TSSETUP2_NSIGND)
-+
-+/*
-+ * For now, we use one of the minor numbers from the local/experimental
-+ * range.
-+ */
-+#define EP93XX_TS_MINOR 240
-+
-+/*
-+ * Static Declarations
-+ */
-+static unsigned int guiLastX, guiLastY;
-+static unsigned int guiLastInvPressure;
-+
-+struct TouchScreenSample
-+{
-+ int currentX;
-+ int currentY;
-+ int currentButton;
-+ int currentPressure;
-+ struct timeval currentTime;
-+};
-+
-+/*
-+ * This must match the structure in tslib.
-+ */
-+struct ts_sample {
-+ int x;
-+ int y;
-+ unsigned int pressure;
-+ struct timeval tv;
-+};
-+
-+static struct TouchScreenSample gSample;
-+static int bFreshTouchData;
-+static int bCurrentPenDown;
-+
-+static DECLARE_WAIT_QUEUE_HEAD(queue);
-+static DEFINE_SEMAPHORE(open_sem);
-+static DEFINE_SPINLOCK(event_buffer_lock);
-+static struct fasync_struct *ep93xx_fasync;
-+
-+/*
-+ * Typedef Declarations
-+ */
-+typedef enum {
-+ TS_MODE_UN_INITIALIZED,
-+ TS_MODE_HARDWARE_SCAN,
-+ TS_MODE_SOFT_SCAN
-+} ts_mode_t;
-+
-+static ts_mode_t gScanningMode;
-+
-+typedef enum{
-+ TS_STATE_STOPPED = 0,
-+ TS_STATE_Z1,
-+ TS_STATE_Z2,
-+ TS_STATE_Y,
-+ TS_STATE_X,
-+ TS_STATE_DONE
-+} ts_states_t;
-+
-+typedef struct
-+{
-+ unsigned int uiX;
-+ unsigned int uiY;
-+ unsigned int uiZ1;
-+ unsigned int uiZ2;
-+ ts_states_t state;
-+} ts_struct_t;
-+
-+static ts_struct_t sTouch;
-+
-+/*
-+ * From the spec, here's how to set up the touch screen's switch registers.
-+ */
-+typedef struct
-+{
-+ unsigned int uiDetect;
-+ unsigned int uiDischarge;
-+ unsigned int uiXSample;
-+ unsigned int uiYSample;
-+ unsigned int uiSwitchZ1;
-+ unsigned int uiSwitchZ2;
-+}SwitchStructType;
-+
-+/*
-+ * Here's the switch settings for a 4-wire touchscreen. See the spec
-+ * for how to handle a 4, 7, or 8-wire.
-+ */
-+const static SwitchStructType sSwitchSettings =
-+/* s28en=0 */
-+/* TSDetect TSDischarge TSXSample TSYSample SwitchZ1 SwitchZ2 */
-+ {0x00403604, 0x0007fe04, 0x00081604, 0x00104601, 0x00101601, 0x00101608};
-+
-+/*
-+ * Function declarations
-+ */
-+static void ep93xx_ts_set_direct(unsigned int uiADCSwitch);
-+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id);
-+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id);
-+static void ee93xx_ts_evt_add(int button, int dX, int dY, int Pressure);
-+static ssize_t ep93xx_ts_read(struct file *filp, char *buf,
-+ size_t count, loff_t *l);
-+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait);
-+static int ep93xx_ts_open(struct inode *inode, struct file *filp);
-+static int ep93xx_ts_fasync(int fd, struct file *filp, int on);
-+static int ep93xx_ts_release(struct inode *inode, struct file *filp);
-+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer,
-+ size_t count, loff_t *ppos);
-+static void ep93xx_ts_setup(void);
-+static void ep93xx_ts_shutdown(void);
-+int __init ep93xx_ts_init(void);
-+void __exit ep93xx_ts_exit(void);
-+static unsigned int CalculateInvPressure(void);
-+static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff);
-+static void TS_Soft_Scan_Mode(void);
-+static void TS_Hardware_Scan_Mode(void);
-+static void ProcessPointData(void);
-+static void Set_Timer2_uSec(unsigned int Delay_mSec);
-+static void Stop_Timer2(void);
-+
-+/*
-+ * ep93xx_ts_isr
-+ */
-+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id)
-+{
-+ /*
-+ * Note that we don't clear the interrupt here. The interrupt
-+ * gets cleared in TS_Soft_Scan_Mode when the TS ENABLE
-+ * bit is cleared.
-+ */
-+
-+ /*
-+ * Set the ts to manual polling mode and schedule a callback.
-+ * That way we can return from the isr in a reasonable amount of
-+ * time and process the touch in the callback after a brief delay.
-+ */
-+ TS_Soft_Scan_Mode();
-+
-+ return(IRQ_HANDLED);
-+}
-+
-+/*
-+ * Save the current ts 'event' in an atomic fashion.
-+ */
-+static void ee93xx_ts_evt_add(int buttons, int iX, int iY, int iPressure)
-+{
-+ /*
-+ * Note the event, but use spinlocks to keep it from getting
-+ * halfway read if we get interrupted.
-+ */
-+
-+ spin_lock(&event_buffer_lock);
-+
-+ gSample.currentX = iX;
-+ gSample.currentY = iY;
-+ gSample.currentButton = buttons;
-+ gSample.currentPressure = iPressure;
-+ bFreshTouchData = 1;
-+ do_gettimeofday(&gSample.currentTime);
-+
-+ spin_unlock(&event_buffer_lock);
-+
-+ kill_fasync(&ep93xx_fasync, SIGIO, POLL_IN);
-+ wake_up_interruptible(&queue);
-+}
-+
-+
-+static ssize_t ep93xx_ts_read(struct file *filp, char *buf, size_t count, loff_t *l)
-+{
-+ unsigned short data[3];
-+ struct ts_sample ts_data;
-+ int iReturn = -EFAULT;
-+
-+ if (!bFreshTouchData)
-+ {
-+ iReturn = 0;
-+ }
-+ else if (count == sizeof(data))
-+ {
-+ spin_lock_irq(&event_buffer_lock);
-+ bFreshTouchData = 0;
-+ data[0] = gSample.currentX;
-+ data[1] = gSample.currentY;
-+ data[2] = gSample.currentButton;
-+
-+ spin_unlock_irq(&event_buffer_lock);
-+
-+ if (copy_to_user(buf, data, sizeof data))
-+ return -EFAULT;
-+
-+ count -= sizeof(data);
-+
-+ /* return the # of bytes that got read */
-+ iReturn = sizeof(data) ;
-+ }
-+ else if (count == sizeof(struct ts_sample) )
-+ {
-+ spin_lock_irq(&event_buffer_lock);
-+ bFreshTouchData = 0;
-+ ts_data.x = gSample.currentX;
-+ ts_data.y = gSample.currentY;
-+ ts_data.pressure = gSample.currentPressure;
-+ ts_data.tv = gSample.currentTime;
-+ spin_unlock_irq(&event_buffer_lock);
-+
-+ if (copy_to_user(buf, &ts_data, sizeof(struct ts_sample)))
-+ {
-+ iReturn = -EFAULT;
-+ }
-+ else
-+ {
-+ count -= sizeof(ts_data);
-+ iReturn = sizeof(ts_data);
-+ }
-+ }
-+
-+ return iReturn;
-+}
-+
-+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait)
-+{
-+ poll_wait(filp, &queue, wait);
-+
-+ if (bFreshTouchData)
-+ {
-+ return POLLIN | POLLRDNORM;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ep93xx_ts_open(struct inode *inode, struct file *filp)
-+{
-+ if (down_trylock(&open_sem))
-+ {
-+ return -EBUSY;
-+ }
-+
-+ ep93xx_ts_setup();
-+
-+ return 0;
-+}
-+
-+/*
-+ * Asynchronous I/O support.
-+ */
-+static int ep93xx_ts_fasync(int fd, struct file *filp, int on)
-+{
-+ int retval;
-+
-+ retval = fasync_helper(fd, filp, on, &ep93xx_fasync);
-+ if (retval < 0)
-+ {
-+ return retval;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ep93xx_ts_release(struct inode *inode, struct file *filp)
-+{
-+ Stop_Timer2();
-+
-+ /*
-+ * Call our async I/O support to request that this file
-+ * cease to be used for async I/O.
-+ */
-+ ep93xx_ts_fasync(-1, filp, 0);
-+
-+ ep93xx_ts_shutdown();
-+
-+ up(&open_sem);
-+
-+ return 0;
-+}
-+
-+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer, size_t count,
-+ loff_t *ppos)
-+{
-+ return -EINVAL;
-+}
-+
-+
-+static int ep93xx_ts_ioctl(struct inode *inode, struct file *file, uint command, ulong u)
-+{
-+ static const int version = EV_VERSION;
-+ static const u_int32_t bit =(1 << EV_ABS);
-+ static const u_int32_t absbit = (1 << ABS_X) | (1 << ABS_Y) | (1 << ABS_PRESSURE);
-+ int iReturn ;
-+ int i = 0;
-+
-+ switch(command)
-+ {
-+ case EVIOCGVERSION:
-+ i = copy_to_user((void __user *)u, (void *)version, sizeof(version));
-+ iReturn = i ? -EFAULT : 0;
-+ break;
-+
-+ case EVIOCGBIT(0,sizeof(u_int32_t) * 8) :
-+ i = copy_to_user((void __user *)u, (void *)bit, sizeof(bit));
-+ iReturn = i ? -EFAULT : 0;
-+ break;
-+
-+ case EVIOCGBIT(EV_ABS, sizeof(absbit) * 8):
-+ i = copy_to_user((void __user *)u, (void *)absbit, sizeof(absbit));
-+ iReturn = i ? -EFAULT : 0;
-+ break;
-+ default:
-+ iReturn = -1;
-+ break;
-+ }
-+
-+ return iReturn;
-+}
-+
-+static struct file_operations ep93xx_ts_fops = {
-+ owner: THIS_MODULE,
-+ read: ep93xx_ts_read,
-+ write: ep93xx_ts_write,
-+ poll: ep93xx_ts_poll,
-+ open: ep93xx_ts_open,
-+ unlocked_ioctl: ep93xx_ts_ioctl,
-+ release: ep93xx_ts_release,
-+ fasync: ep93xx_ts_fasync,
-+};
-+
-+static struct miscdevice ep93xx_ts_miscdev =
-+{
-+ EP93XX_TS_MINOR,
-+ "ep93xx_ts",
-+ &ep93xx_ts_fops
-+};
-+
-+void ep93xx_ts_setup(void)
-+{
-+ unsigned int uiKTDIV, uiTSXYMaxMin;
-+
-+ /*
-+ * Set the TSEN bit in KTDIV so that we are enabling the clock
-+ * for the touchscreen.
-+ */
-+ uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
-+ uiKTDIV |= EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
-+ ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
-+
-+ /*
-+ * Program the EP93XX_TOUCHSCREEN_SETUP and TSSetup2 registers.
-+ */
-+ __raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
-+ __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+ /*
-+ * Set the the touch settings.
-+ */
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DISCHARGE);
-+
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiSwitchZ1, EP93XX_TOUCHSCREEN_XSAMPLE);
-+
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiSwitchZ2, EP93XX_TOUCHSCREEN_YSAMPLE);
-+
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiDetect, EP93XX_TOUCHSCREEN_DETECT);
-+
-+ /*
-+ * X,YMin set to 0x40 = have to drag that many pixels for a new irq.
-+ * X,YMax set to 0x40 = 1024 pixels is the maximum movement within the
-+ * time scan limit.
-+ */
-+ uiTSXYMaxMin = (50 << TSMAXMIN_XMIN_SHIFT) & TSMAXMIN_XMIN_MASK;
-+ uiTSXYMaxMin |= (50 << TSMAXMIN_YMIN_SHIFT) & TSMAXMIN_YMIN_MASK;
-+ uiTSXYMaxMin |= (0xff << TSMAXMIN_XMAX_SHIFT) & TSMAXMIN_XMAX_MASK;
-+ uiTSXYMaxMin |= (0xff << TSMAXMIN_YMAX_SHIFT) & TSMAXMIN_YMAX_MASK;
-+ __raw_writel(uiTSXYMaxMin, EP93XX_TOUCHSCREEN_XYMAXMIN);
-+
-+ bCurrentPenDown = 0;
-+ bFreshTouchData = 0;
-+ guiLastX = 0;
-+ guiLastY = 0;
-+ guiLastInvPressure = 0xffffff;
-+
-+ /*
-+ * Enable the touch screen scanning engine.
-+ */
-+ TS_Hardware_Scan_Mode();
-+}
-+
-+/*
-+ * ep93xx_ts_shutdown
-+ *
-+ */
-+static void
-+ep93xx_ts_shutdown(void)
-+{
-+ unsigned int uiKTDIV;
-+
-+ sTouch.state = TS_STATE_STOPPED;
-+ Stop_Timer2();
-+
-+ /*
-+ * Disable the scanning engine.
-+ */
-+ __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP);
-+ __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+ /*
-+ * Clear the TSEN bit in KTDIV so that we are disabling the clock
-+ * for the touchscreen.
-+ */
-+ uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
-+ uiKTDIV &= ~EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
-+ ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
-+
-+} /* ep93xx_ts_shutdown */
-+
-+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id)
-+{
-+ switch(sTouch.state)
-+ {
-+ case TS_STATE_STOPPED:
-+ TS_Hardware_Scan_Mode();
-+ break;
-+
-+ /*
-+ * Get the Z1 value for pressure measurement and set up
-+ * the switch register for getting the Z2 measurement.
-+ */
-+ case TS_STATE_Z1:
-+ Set_Timer2_uSec(EP93XX_TS_ADC_DELAY_USEC);
-+ sTouch.uiZ1 = ADCGetData(2, 200);
-+ ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ2);
-+ sTouch.state = TS_STATE_Z2;
-+ break;
-+
-+ /*
-+ * Get the Z2 value for pressure measurement and set up
-+ * the switch register for getting the Y measurement.
-+ */
-+ case TS_STATE_Z2:
-+ sTouch.uiZ2 = ADCGetData(2, 200);
-+ ep93xx_ts_set_direct(sSwitchSettings.uiYSample);
-+ sTouch.state = TS_STATE_Y;
-+ break;
-+
-+ /*
-+ * Get the Y value and set up the switch register for
-+ * getting the X measurement.
-+ */
-+ case TS_STATE_Y:
-+ sTouch.uiY = ADCGetData(4, 20);
-+ ep93xx_ts_set_direct(sSwitchSettings.uiXSample);
-+ sTouch.state = TS_STATE_X;
-+ break;
-+
-+ /*
-+ * Read the X value. This is the last of the 4 adc values
-+ * we need so we continue on to process the data.
-+ */
-+ case TS_STATE_X:
-+ Stop_Timer2();
-+
-+ sTouch.uiX = ADCGetData(4, 20);
-+
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+ sTouch.state = TS_STATE_DONE;
-+
-+ /*
-+ * Process this set of ADC readings.
-+ */
-+ ProcessPointData();
-+
-+ break;
-+
-+ /*
-+ * Shouldn't get here. But if we do, we can recover...
-+ */
-+ case TS_STATE_DONE:
-+ TS_Hardware_Scan_Mode();
-+ break;
-+ }
-+
-+ /*
-+ * Clear the timer2 interrupt.
-+ */
-+ __raw_writel(1, EP93XX_TIMER2_CLEAR);
-+ return(IRQ_HANDLED);
-+}
-+
-+/*---------------------------------------------------------------------
-+ * ProcessPointData
-+ *
-+ * This routine processes the ADC data into usable point data and then
-+ * puts the driver into hw or sw scanning mode before returning.
-+ *
-+ * We calculate inverse pressure (lower number = more pressure) then
-+ * do a hystheresis with the two pressure values 'light' and 'heavy'.
-+ *
-+ * If we are above the light, we have pen up.
-+ * If we are below the heavy we have pen down.
-+ * As long as the pressure stays below the light, pen stays down.
-+ * When we get above the light again, pen goes back up.
-+ *
-+ */
-+static void ProcessPointData(void)
-+{
-+ int bValidPoint = 0;
-+ unsigned int uiXDiff, uiYDiff, uiInvPressureDiff;
-+ unsigned int uiInvPressure;
-+
-+ /*
-+ * Calculate the current pressure.
-+ */
-+ uiInvPressure = CalculateInvPressure();
-+
-+ /*
-+ * If pen pressure is so light that it is greater than the 'max' setting
-+ * then we consider this to be a pen up.
-+ */
-+ if (uiInvPressure >= TS_LIGHT_INV_PRESSURE)
-+ {
-+ bCurrentPenDown = 0;
-+ ee93xx_ts_evt_add(0, guiLastX, guiLastY, 0);
-+ TS_Hardware_Scan_Mode();
-+ return;
-+ }
-+
-+ /*
-+ * Hysteresis:
-+ * If the pen pressure is hard enough to be less than the 'min' OR
-+ * the pen is already down and is still less than the 'max'...
-+ */
-+ if ((uiInvPressure < TS_HEAVY_INV_PRESSURE) ||
-+ (bCurrentPenDown && (uiInvPressure < TS_LIGHT_INV_PRESSURE)))
-+ {
-+ if (bCurrentPenDown)
-+ {
-+ /*
-+ * If pen was previously down, check the difference between
-+ * the last sample and this one... if the difference between
-+ * samples is too great, ignore the sample.
-+ */
-+ uiXDiff = abs(guiLastX - sTouch.uiX);
-+ uiYDiff = abs(guiLastY - sTouch.uiY);
-+ uiInvPressureDiff = abs(guiLastInvPressure - uiInvPressure);
-+
-+ if (uiXDiff < TS_MAX_VALID_XY_CHANGE
-+ && uiYDiff < TS_MAX_VALID_XY_CHANGE
-+ && uiInvPressureDiff < TS_MAX_VALID_PRESSURE_CHANGE)
-+ {
-+ bValidPoint = 1;
-+ }
-+ }
-+ else
-+ {
-+ bValidPoint = 1;
-+ }
-+
-+ /*
-+ * If either the pen was put down or dragged make a note of it.
-+ */
-+ if (bValidPoint)
-+ {
-+ guiLastX = sTouch.uiX;
-+ guiLastY = sTouch.uiY;
-+ guiLastInvPressure = uiInvPressure;
-+ bCurrentPenDown = 1;
-+ ee93xx_ts_evt_add(1, sTouch.uiX, sTouch.uiY,
-+ 0x7000000 / uiInvPressure);
-+ }
-+
-+ TS_Soft_Scan_Mode();
-+ return;
-+ }
-+
-+ TS_Hardware_Scan_Mode();
-+}
-+
-+static void ep93xx_ts_set_direct(unsigned int uiADCSwitch)
-+{
-+ unsigned int uiResult;
-+
-+ /*
-+ * Set the switch settings in the direct register.
-+ */
-+ __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+ __raw_writel(uiADCSwitch, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+ /*
-+ * Read and throw away the first sample.
-+ */
-+ do {
-+ uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
-+ } while (!(uiResult & TSXYRESULT_SDR));
-+
-+}
-+
-+static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff)
-+{
-+ unsigned int uiResult, uiValue, uiCount, uiLowest, uiHighest, uiSum, uiAve;
-+
-+ do
-+ {
-+ /*
-+ * Initialize our values.
-+ */
-+ uiLowest = 0xfffffff;
-+ uiHighest = 0;
-+ uiSum = 0;
-+
-+ for (uiCount = 0; uiCount < uiSamples; uiCount++)
-+ {
-+ /*
-+ * Read the touch screen four more times and average.
-+ */
-+ do {
-+ uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
-+ } while (!(uiResult & TSXYRESULT_SDR));
-+
-+ uiValue = (uiResult & TSXYRESULT_AD_MASK) >> TSXYRESULT_AD_SHIFT;
-+ uiValue = ((uiValue >> 4) + ((1 + TSXYRESULT_X_MASK)>>1)) & TSXYRESULT_X_MASK;
-+
-+ /*
-+ * Add up the values.
-+ */
-+ uiSum += uiValue;
-+
-+ /*
-+ * Get the lowest and highest values.
-+ */
-+ if (uiValue < uiLowest)
-+ {
-+ uiLowest = uiValue;
-+ }
-+ if (uiValue > uiHighest)
-+ {
-+ uiHighest = uiValue;
-+ }
-+ }
-+ } while ((uiHighest - uiLowest) > uiMaxDiff);
-+
-+ /*
-+ * Calculate the Average value.
-+ */
-+ uiAve = uiSum / uiSamples;
-+
-+ return uiAve;
-+}
-+
-+/*
-+ * CalculateInvPressure
-+ *
-+ * Is the Touch Valid. Touch is not valid if the X or Y value is not
-+ * in range and the pressure is not enough.
-+ *
-+ * Touch resistance can be measured by the following formula:
-+ *
-+ * Rx * X * Z2
-+ * Rtouch = --------- * (-- - 1)
-+ * 4096 Z1
-+ *
-+ * This is simplified in the ration of Rtouch to Rx. The lower the value, the
-+ * higher the pressure.
-+ *
-+ * Z2
-+ * InvPressure = X * (-- - 1)
-+ * Z1
-+ */
-+static unsigned int CalculateInvPressure(void)
-+{
-+ unsigned int uiInvPressure;
-+
-+ /*
-+ * Check to see if the point is valid.
-+ */
-+ if (sTouch.uiZ1 < MIN_Z1_VALUE)
-+ {
-+ uiInvPressure = 0x10000;
-+ }
-+
-+ /*
-+ * Can omit the pressure calculation if you need to get rid of the division.
-+ */
-+ else
-+ {
-+ uiInvPressure = ((sTouch.uiX * sTouch.uiZ2) / sTouch.uiZ1) - sTouch.uiX;
-+ }
-+
-+ return uiInvPressure;
-+}
-+
-+/*
-+ * TS_Hardware_Scan_Mode
-+ *
-+ * Enables the ep93xx ts scanning engine so that when the pen goes down
-+ * we will get an interrupt.
-+ */
-+static void TS_Hardware_Scan_Mode(void)
-+{
-+ unsigned int uiDevCfg;
-+
-+ /*
-+ * Disable the soft scanning engine.
-+ */
-+ sTouch.state = TS_STATE_STOPPED;
-+ Stop_Timer2();
-+
-+ /*
-+ * Clear the TIN (Touchscreen INactive) bit so we can go to
-+ * automatic scanning mode.
-+ */
-+ uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-+ ep93xx_syscon_swlocked_write(uiDevCfg & ~EP93XX_SYSCON_DEVCFG_TIN,
-+ EP93XX_SYSCON_DEVCFG);
-+
-+ /*
-+ * Enable the touch screen scanning state machine by setting
-+ * the ENABLE bit.
-+ */
-+ __raw_writel(TSSETUP_DEFAULT | TSSETUP_ENABLE, EP93XX_TOUCHSCREEN_SETUP);
-+
-+ /*
-+ * Set the flag to show that we are in interrupt mode.
-+ */
-+ gScanningMode = TS_MODE_HARDWARE_SCAN;
-+
-+ /*
-+ * Initialize EP93XX_TOUCHSCREEN_SETUP2 register.
-+ */
-+ __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+}
-+
-+/*
-+ * TS_Soft_Scan_Mode
-+ *
-+ * Sets the touch screen to manual polling mode.
-+ */
-+static void TS_Soft_Scan_Mode(void)
-+{
-+ unsigned int uiDevCfg;
-+
-+ if (gScanningMode != TS_MODE_SOFT_SCAN)
-+ {
-+ /*
-+ * Disable the touch screen scanning state machine by clearing
-+ * the ENABLE bit.
-+ */
-+ __raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
-+
-+ /*
-+ * Set the TIN bit so we can do manual touchscreen polling.
-+ */
-+ uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-+ ep93xx_syscon_swlocked_write(uiDevCfg | EP93XX_SYSCON_DEVCFG_TIN,
-+ EP93XX_SYSCON_DEVCFG);
-+ }
-+
-+ /*
-+ * Set the switch register up for the first ADC reading
-+ */
-+ ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ1);
-+
-+ /*
-+ * Initialize our software state machine to know which ADC
-+ * reading to take
-+ */
-+ sTouch.state = TS_STATE_Z1;
-+
-+ /*
-+ * Set the timer so after a mSec or two settling delay it will
-+ * take the first ADC reading.
-+ */
-+ Set_Timer2_uSec(EP93XX_TS_PER_POINT_DELAY_USEC);
-+
-+ /*
-+ * Note that we are in sw scanning mode not hw scanning mode.
-+ */
-+ gScanningMode = TS_MODE_SOFT_SCAN;
-+
-+}
-+
-+static void Set_Timer2_uSec(unsigned int uiDelay_uSec)
-+{
-+ unsigned int uiClockTicks;
-+
-+ /*
-+ * Stop timer 2
-+ */
-+ __raw_writel(0, EP93XX_TIMER2_CONTROL);
-+
-+ uiClockTicks = ((uiDelay_uSec * 508) + 999) / 1000;
-+ __raw_writel(uiClockTicks, EP93XX_TIMER2_LOAD);
-+ __raw_writel(uiClockTicks, EP93XX_TIMER2_VALUE);
-+
-+ /*
-+ * Set up Timer 2 for 508 kHz clock and periodic mode.
-+ */
-+ __raw_writel(0xC8, EP93XX_TIMER2_CONTROL);
-+
-+}
-+
-+static void Stop_Timer2(void)
-+{
-+ __raw_writel(0, EP93XX_TIMER2_CONTROL);
-+}
-+
-+/*
-+ * Initialization and exit routines
-+ */
-+int __init ep93xx_ts_init(void)
-+{
-+ int retval;
-+
-+ retval = request_irq(IRQ_EP93XX_TOUCH, ep93xx_ts_isr,
-+ IRQF_DISABLED, "ep93xx_ts", 0);
-+ if (retval)
-+ {
-+ printk(KERN_WARNING "ep93xx_ts: failed to get touchscreen IRQ\n");
-+ return retval;
-+ }
-+
-+ retval = request_irq(IRQ_EP93XX_TIMER2, ep93xx_timer2_isr,
-+ IRQF_DISABLED, "ep93xx_timer2", 0);
-+ if (retval)
-+ {
-+ printk(KERN_WARNING "ep93xx_ts: failed to get timer2 IRQ\n");
-+ free_irq(IRQ_EP93XX_TOUCH, 0);
-+ return retval;
-+ }
-+
-+ misc_register(&ep93xx_ts_miscdev);
-+
-+ sTouch.state = TS_STATE_STOPPED;
-+ gScanningMode = TS_MODE_UN_INITIALIZED;
-+
-+ printk(KERN_NOTICE "ep93xx touchscreen driver configured for 4-wire operation\n");
-+
-+ return 0;
-+}
-+
-+void __exit ep93xx_ts_exit(void)
-+{
-+ Stop_Timer2();
-+
-+ free_irq(IRQ_EP93XX_TOUCH, 0);
-+ free_irq(IRQ_EP93XX_TIMER2, 0);
-+
-+ misc_deregister(&ep93xx_ts_miscdev);
-+}
-+
-+module_init(ep93xx_ts_init);
-+module_exit(ep93xx_ts_exit);
-+
-+MODULE_DESCRIPTION("Cirrus EP93xx touchscreen driver");
-+MODULE_SUPPORTED_DEVICE("touchscreen/ep93xx");
-+MODULE_LICENSE("GPL");
projects / openwrt / staging / stintel.git / commitdiff