MX5: mx51evk: make use of GPIO framework

Signed-off-by: Stefano Babic <sbabic@denx.de>

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index fd7342f11271bc3947e93b5078a726bbc00a4d8c..94ea1f29051fc675b4de614a778f0ee63c1c5da2 100644 (file)
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -22,6 +22,7 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/iomux.h>
@@ -180,7 +181,6 @@ static void setup_iomux_spi(void)
 static void power_init(void)
 {
        unsigned int val;
-       unsigned int reg;
        struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 
        /* Write needed to Power Gate 2 register */
@@ -249,13 +249,7 @@ static void power_init(void)
        pmic_reg_write(REG_MODE_1, val);
        udelay(200);
 
-       reg = readl(GPIO2_BASE_ADDR + 0x0);
-       reg &= ~0x4000;  /* Lower reset line */
-       writel(reg, GPIO2_BASE_ADDR + 0x0);
-
-       reg = readl(GPIO2_BASE_ADDR + 0x4);
-       reg |= 0x4000;  /* configure GPIO lines as output */
-       writel(reg, GPIO2_BASE_ADDR + 0x4);
+       gpio_direction_output(46, 0);
 
        /* Reset the ethernet controller over GPIO */
        writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);
@@ -267,9 +261,7 @@ static void power_init(void)
 
        udelay(500);
 
-       reg = readl(GPIO2_BASE_ADDR + 0x0);
-       reg |= 0x4000;
-       writel(reg, GPIO2_BASE_ADDR + 0x0);
+       gpio_set_value(46, 1);
 }
 
 #ifdef CONFIG_FSL_ESDHC
@@ -278,9 +270,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
        struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
        if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-               *cd = readl(GPIO1_BASE_ADDR) & 0x01;
+               *cd = gpio_get_value(0);
        else
-               *cd = readl(GPIO1_BASE_ADDR) & 0x40;
+               *cd = gpio_get_value(6);
 
        return 0;
 }

diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 3f2aca1bf35c2b1b1b01807651ba4aa4efe92fc4..7d05dc8429295f6370dcb8ee3c4960ed15e43f32 100644 (file)
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -60,6 +60,7 @@
  */
 #define CONFIG_MXC_UART
 #define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_GPIO
 
 /*
  * SPI Configs