--- /dev/null
+/*
+ * linux/arch/unicore32/include/asm/gpio.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_GPIO_H__
+#define __UNICORE_GPIO_H__
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define GPI_OTP_INT 0
+#define GPI_PCI_INTA 1
+#define GPI_PCI_INTB 2
+#define GPI_PCI_INTC 3
+#define GPI_PCI_INTD 4
+#define GPI_BAT_DET 5
+#define GPI_SD_CD 6
+#define GPI_SOFF_REQ 7
+#define GPI_SD_WP 8
+#define GPI_LCD_CASE_OFF 9
+#define GPO_WIFI_EN 10
+#define GPO_HDD_LED 11
+#define GPO_VGA_EN 12
+#define GPO_LCD_EN 13
+#define GPO_LED_DATA 14
+#define GPO_LED_CLK 15
+#define GPO_CAM_PWR_EN 16
+#define GPO_LCD_VCC_EN 17
+#define GPO_SOFT_OFF 18
+#define GPO_BT_EN 19
+#define GPO_FAN_ON 20
+#define GPO_SPKR 21
+#define GPO_SET_V1 23
+#define GPO_SET_V2 24
+#define GPO_CPU_HEALTH 25
+#define GPO_LAN_SEL 26
+
+#ifdef CONFIG_PUV3_NB0916
+#define GPI_BTN_TOUCH 14
+#define GPIO_IN 0x000043ff /* 1 for input */
+#define GPIO_OUT 0x0fffbc00 /* 1 for output */
+#endif /* CONFIG_PUV3_NB0916 */
+
+#ifdef CONFIG_PUV3_SMW0919
+#define GPIO_IN 0x000003ff /* 1 for input */
+#define GPIO_OUT 0x0ffffc00 /* 1 for output */
+#endif /* CONFIG_PUV3_SMW0919 */
+
+#ifdef CONFIG_PUV3_DB0913
+#define GPIO_IN 0x000001df /* 1 for input */
+#define GPIO_OUT 0x03fee800 /* 1 for output */
+#endif /* CONFIG_PUV3_DB0913 */
+
+#define GPIO_DIR (~((GPIO_IN) | 0xf0000000))
+ /* 0 input, 1 output */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ return GPIO_GPLR & GPIO_GPIO(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+ if (value)
+ GPIO_GPSR = GPIO_GPIO(gpio);
+ else
+ GPIO_GPCR = GPIO_GPIO(gpio);
+ else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+ if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & GPIO_GPIR))
+ return IRQ_GPIOLOW0 + gpio;
+ else
+ return IRQ_GPIO0 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+ if (irq < IRQ_GPIOHIGH)
+ return irq - IRQ_GPIOLOW0;
+ else
+ return irq - IRQ_GPIO0;
+}
+
+#endif /* __UNICORE_GPIO_H__ */
--- /dev/null
+/*
+ * linux/arch/unicore32/kernel/gpio.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/* in FPGA, no GPIO support */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_LEDS
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+static const struct gpio_led puv3_gpio_leds[] = {
+ { .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
+ .default_trigger = "heartbeat", },
+ { .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data puv3_gpio_led_data = {
+ .num_leds = ARRAY_SIZE(puv3_gpio_leds),
+ .leds = (void *) puv3_gpio_leds,
+};
+
+static struct platform_device puv3_gpio_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = (void *) &puv3_gpio_led_data,
+ }
+};
+
+static int __init puv3_gpio_leds_init(void)
+{
+ platform_device_register(&puv3_gpio_gpio_leds);
+ return 0;
+}
+
+device_initcall(puv3_gpio_leds_init);
+#endif
+
+static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return GPIO_GPLR & GPIO_GPIO(offset);
+}
+
+static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ GPIO_GPSR = GPIO_GPIO(offset);
+ else
+ GPIO_GPCR = GPIO_GPIO(offset);
+}
+
+static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ GPIO_GPDR &= ~GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ puv3_gpio_set(chip, offset, value);
+ GPIO_GPDR |= GPIO_GPIO(offset);
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct gpio_chip puv3_gpio_chip = {
+ .label = "gpio",
+ .direction_input = puv3_direction_input,
+ .direction_output = puv3_direction_output,
+ .set = puv3_gpio_set,
+ .get = puv3_gpio_get,
+ .base = 0,
+ .ngpio = GPIO_MAX + 1,
+};
+
+void __init puv3_init_gpio(void)
+{
+ GPIO_GPDR = GPIO_DIR;
+#if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919) \
+ || defined(CONFIG_PUV3_DB0913)
+ gpio_set_value(GPO_WIFI_EN, 1);
+ gpio_set_value(GPO_HDD_LED, 1);
+ gpio_set_value(GPO_VGA_EN, 1);
+ gpio_set_value(GPO_LCD_EN, 1);
+ gpio_set_value(GPO_CAM_PWR_EN, 0);
+ gpio_set_value(GPO_LCD_VCC_EN, 1);
+ gpio_set_value(GPO_SOFT_OFF, 1);
+ gpio_set_value(GPO_BT_EN, 1);
+ gpio_set_value(GPO_FAN_ON, 0);
+ gpio_set_value(GPO_SPKR, 0);
+ gpio_set_value(GPO_CPU_HEALTH, 1);
+ gpio_set_value(GPO_LAN_SEL, 1);
+/*
+ * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
+ * gpio_set_value(GPO_SET_V1, 1);
+ * gpio_set_value(GPO_SET_V2, 1);
+ */
+#endif
+ gpiochip_add(&puv3_gpio_chip);
+}
--- /dev/null
+/*
+ * linux/arch/unicore32/kernel/irq.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/kallsyms.h>
+#include <linux/proc_fs.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/system.h>
+#include <mach/hardware.h>
+
+#include "setup.h"
+
+/*
+ * PKUnity GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+static int GPIO_IRQ_mask = 0;
+
+#define GPIO_MASK(irq) (1 << (irq - IRQ_GPIO0))
+
+static int puv3_gpio_type(unsigned int irq, unsigned int type)
+{
+ unsigned int mask;
+
+ if (irq < IRQ_GPIOHIGH)
+ mask = 1 << irq;
+ else
+ mask = GPIO_MASK(irq);
+
+ if (type == IRQ_TYPE_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+
+ GPIO_GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GPIO_GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+ return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged. This is for IRQs from 0 to 7.
+ */
+static void puv3_low_gpio_ack(unsigned int irq)
+{
+ GPIO_GEDR = (1 << irq);
+}
+
+static void puv3_low_gpio_mask(unsigned int irq)
+{
+ INTC_ICMR &= ~(1 << irq);
+}
+
+static void puv3_low_gpio_unmask(unsigned int irq)
+{
+ INTC_ICMR |= 1 << irq;
+}
+
+static int puv3_low_gpio_wake(unsigned int irq, unsigned int on)
+{
+ if (on)
+ PM_PWER |= 1 << irq;
+ else
+ PM_PWER &= ~(1 << irq);
+ return 0;
+}
+
+static struct irq_chip puv3_low_gpio_chip = {
+ .name = "GPIO-low",
+ .ack = puv3_low_gpio_ack,
+ .mask = puv3_low_gpio_mask,
+ .unmask = puv3_low_gpio_unmask,
+ .set_type = puv3_gpio_type,
+ .set_wake = puv3_low_gpio_wake,
+};
+
+/*
+ * IRQ8 (GPIO0 through 27) handler. We enter here with the
+ * irq_controller_lock held, and IRQs disabled. Decode the IRQ
+ * and call the handler.
+ */
+static void
+puv3_gpio_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int mask;
+
+ mask = GPIO_GEDR;
+ do {
+ /*
+ * clear down all currently active IRQ sources.
+ * We will be processing them all.
+ */
+ GPIO_GEDR = mask;
+
+ irq = IRQ_GPIO0;
+ do {
+ if (mask & 1)
+ generic_handle_irq(irq);
+ mask >>= 1;
+ irq++;
+ } while (mask);
+ mask = GPIO_GEDR;
+ } while (mask);
+}
+
+/*
+ * GPIO0-27 edge IRQs need to be handled specially.
+ * In addition, the IRQs are all collected up into one bit in the
+ * interrupt controller registers.
+ */
+static void puv3_high_gpio_ack(unsigned int irq)
+{
+ unsigned int mask = GPIO_MASK(irq);
+
+ GPIO_GEDR = mask;
+}
+
+static void puv3_high_gpio_mask(unsigned int irq)
+{
+ unsigned int mask = GPIO_MASK(irq);
+
+ GPIO_IRQ_mask &= ~mask;
+
+ GPIO_GRER &= ~mask;
+ GPIO_GFER &= ~mask;
+}
+
+static void puv3_high_gpio_unmask(unsigned int irq)
+{
+ unsigned int mask = GPIO_MASK(irq);
+
+ GPIO_IRQ_mask |= mask;
+
+ GPIO_GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GPIO_GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+}
+
+static int puv3_high_gpio_wake(unsigned int irq, unsigned int on)
+{
+ if (on)
+ PM_PWER |= PM_PWER_GPIOHIGH;
+ else
+ PM_PWER &= ~PM_PWER_GPIOHIGH;
+ return 0;
+}
+
+static struct irq_chip puv3_high_gpio_chip = {
+ .name = "GPIO-high",
+ .ack = puv3_high_gpio_ack,
+ .mask = puv3_high_gpio_mask,
+ .unmask = puv3_high_gpio_unmask,
+ .set_type = puv3_gpio_type,
+ .set_wake = puv3_high_gpio_wake,
+};
+
+/*
+ * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
+ * this is for internal IRQs i.e. from 8 to 31.
+ */
+static void puv3_mask_irq(unsigned int irq)
+{
+ INTC_ICMR &= ~(1 << irq);
+}
+
+static void puv3_unmask_irq(unsigned int irq)
+{
+ INTC_ICMR |= (1 << irq);
+}
+
+/*
+ * Apart form GPIOs, only the RTC alarm can be a wakeup event.
+ */
+static int puv3_set_wake(unsigned int irq, unsigned int on)
+{
+ if (irq == IRQ_RTCAlarm) {
+ if (on)
+ PM_PWER |= PM_PWER_RTC;
+ else
+ PM_PWER &= ~PM_PWER_RTC;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct irq_chip puv3_normal_chip = {
+ .name = "PKUnity-v3",
+ .ack = puv3_mask_irq,
+ .mask = puv3_mask_irq,
+ .unmask = puv3_unmask_irq,
+ .set_wake = puv3_set_wake,
+};
+
+static struct resource irq_resource = {
+ .name = "irqs",
+ .start = PKUNITY_INTC_BASE,
+ .end = PKUNITY_INTC_BASE + 0xFFFFF,
+};
+
+static struct puv3_irq_state {
+ unsigned int saved;
+ unsigned int icmr;
+ unsigned int iclr;
+ unsigned int iccr;
+} puv3_irq_state;
+
+static int puv3_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct puv3_irq_state *st = &puv3_irq_state;
+
+ st->saved = 1;
+ st->icmr = INTC_ICMR;
+ st->iclr = INTC_ICLR;
+ st->iccr = INTC_ICCR;
+
+ /*
+ * Disable all GPIO-based interrupts.
+ */
+ INTC_ICMR &= ~(0x1ff);
+
+ /*
+ * Set the appropriate edges for wakeup.
+ */
+ GPIO_GRER = PM_PWER & GPIO_IRQ_rising_edge;
+ GPIO_GFER = PM_PWER & GPIO_IRQ_falling_edge;
+
+ /*
+ * Clear any pending GPIO interrupts.
+ */
+ GPIO_GEDR = GPIO_GEDR;
+
+ return 0;
+}
+
+static int puv3_irq_resume(struct sys_device *dev)
+{
+ struct puv3_irq_state *st = &puv3_irq_state;
+
+ if (st->saved) {
+ INTC_ICCR = st->iccr;
+ INTC_ICLR = st->iclr;
+
+ GPIO_GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+ GPIO_GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+ INTC_ICMR = st->icmr;
+ }
+ return 0;
+}
+
+static struct sysdev_class puv3_irq_sysclass = {
+ .name = "pkunity-irq",
+ .suspend = puv3_irq_suspend,
+ .resume = puv3_irq_resume,
+};
+
+static struct sys_device puv3_irq_device = {
+ .id = 0,
+ .cls = &puv3_irq_sysclass,
+};
+
+static int __init puv3_irq_init_devicefs(void)
+{
+ sysdev_class_register(&puv3_irq_sysclass);
+ return sysdev_register(&puv3_irq_device);
+}
+
+device_initcall(puv3_irq_init_devicefs);
+
+void __init init_IRQ(void)
+{
+ unsigned int irq;
+
+ request_resource(&iomem_resource, &irq_resource);
+
+ /* disable all IRQs */
+ INTC_ICMR = 0;
+
+ /* all IRQs are IRQ, not REAL */
+ INTC_ICLR = 0;
+
+ /* clear all GPIO edge detects */
+ GPIO_GPIR = FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ);
+ GPIO_GFER = 0;
+ GPIO_GRER = 0;
+ GPIO_GEDR = 0x0FFFFFFF;
+
+ INTC_ICCR = 1;
+
+ for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
+ set_irq_chip(irq, &puv3_low_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+ 0);
+ }
+
+ for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
+ set_irq_chip(irq, &puv3_normal_chip);
+ set_irq_handler(irq, handle_level_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOAUTOEN,
+ IRQ_NOPROBE);
+ }
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
+ set_irq_chip(irq, &puv3_high_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ irq_modify_status(irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+ 0);
+ }
+
+ /*
+ * Install handler for GPIO 0-27 edge detect interrupts
+ */
+ set_irq_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
+ set_irq_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
+
+#ifdef CONFIG_PUV3_GPIO
+ puv3_init_gpio();
+#endif
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, cpu;
+ struct irq_desc *desc;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i == 0) {
+ char cpuname[12];
+
+ seq_printf(p, " ");
+ for_each_present_cpu(cpu) {
+ sprintf(cpuname, "CPU%d", cpu);
+ seq_printf(p, " %10s", cpuname);
+ }
+ seq_putc(p, '\n');
+ }
+
+ if (i < nr_irqs) {
+ desc = irq_to_desc(i);
+ raw_spin_lock_irqsave(&desc->lock, flags);
+ action = desc->action;
+ if (!action)
+ goto unlock;
+
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
+ seq_printf(p, " %10s", desc->chip->name ? : "-");
+ seq_printf(p, " %s", action->name);
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+unlock:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ } else if (i == nr_irqs) {
+ seq_printf(p, "Error in interrupt!\n");
+ }
+ return 0;
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * come via this function. Instead, they should provide their
+ * own 'handler'
+ */
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (unlikely(irq >= nr_irqs)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Bad IRQ%u\n", irq);
+ ack_bad_irq(irq);
+ } else {
+ generic_handle_irq(irq);
+ }
+
+ irq_exit();
+ set_irq_regs(old_regs);
+}
+
projects / openwrt / staging / blogic.git / commitdiff