serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
};
&adm_dma {
serial0 = &gsbi4_serial;
mdio-gpio0 = &mdio0;
};
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
};
&qcom_pinmux {
label-mac-device = &gmac2;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
chosen {
bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
};
keys {
serial0 = &uart2;
mdio-gpio0 = &mdio0;
};
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
};
&qcom_pinmux {
chosen {
bootargs = "console=ttyMSM0,115200n8";
- stdout-path = "serial0:115200n8";
append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
};
chosen {
bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
};
keys {
chosen {
bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
};
keys {
#include "qcom-ipq8064.dtsi"
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
&CPU_SPC {
status = "okay";
};
#include "qcom-ipq8064.dtsi"
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
&CPU_SPC {
status = "okay";
};
led-upgrade = &general;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
led-upgrade = &power_green;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
led-upgrade = &led_pass;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
leds {
compatible = "gpio-leds";
chosen {
/* use "ubi_rootfs" volume in "ubi" partition as rootfs */
bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
- stdout-path = "serial0:115200n8";
};
leds {
chosen {
bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
- stdout-path = "serial0:115200n8";
append-rootblock = "root=/dev/mmcblk0p";
};
label-mac-device = &gmac2;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
model = "Qualcomm IPQ8065";
compatible = "qcom,ipq8065", "qcom,ipq8064";
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cpus {
qcom,l2 {
qcom,l2-cpufreq = <384000000 600000000 1400000000>;