The device info offset arrays for unevenly spaced register offsets is
great for widely used registers. However, the palette registers are only
used in one function, i9xx_load_luts_internal(), and only for GMCH
platforms, wasting device info. Replace palette_offsets with _PICK() in
palette register definition.
While the use of _PICK() does not check for pipe C existence, neither
does the current offset array usage, and leads to bogus address when
pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads
to a sensible register offset, just non-existing on non-CHV. Either way,
this shouldn't happen anyway.
Remove unused old palette macros while at it.
Bloat-o-meter results below for completeness.
add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184)
Function old new delta
i9xx_load_luts_internal 394 483 +89
i915_driver_load 5103 5107 +4
g4x_pre_enable_dp 378 379 +1
intel_engines_init_mmio 1117 1116 -1
intel_engine_lookup_user 47 46 -1
hdmi_port_clock_valid 310 309 -1
gen11_irq_handler 707 706 -1
intel_device_info_dump_runtime 329 311 -18
intel_device_info_runtime_init 5166 4910 -256
Total: Before=918650, After=918466, chg -0.02%
add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576)
Data old new delta
intel_valleyview_info 200 188 -12
intel_skylake_gt4_info 200 188 -12
intel_skylake_gt3_info 200 188 -12
intel_skylake_gt2_info 200 188 -12
intel_skylake_gt1_info 200 188 -12
intel_sandybridge_m_gt2_info 200 188 -12
intel_sandybridge_m_gt1_info 200 188 -12
intel_sandybridge_d_gt2_info 200 188 -12
intel_sandybridge_d_gt1_info 200 188 -12
intel_pineview_info 200 188 -12
intel_kabylake_gt3_info 200 188 -12
intel_kabylake_gt2_info 200 188 -12
intel_kabylake_gt1_info 200 188 -12
intel_ivybridge_q_info 200 188 -12
intel_ivybridge_m_gt2_info 200 188 -12
intel_ivybridge_m_gt1_info 200 188 -12
intel_ivybridge_d_gt2_info 200 188 -12
intel_ivybridge_d_gt1_info 200 188 -12
intel_ironlake_m_info 200 188 -12
intel_ironlake_d_info 200 188 -12
intel_icelake_11_info 200 188 -12
intel_i965gm_info 200 188 -12
intel_i965g_info 200 188 -12
intel_i945gm_info 200 188 -12
intel_i945g_info 200 188 -12
intel_i915gm_info 200 188 -12
intel_i915g_info 200 188 -12
intel_i865g_info 200 188 -12
intel_i85x_info 200 188 -12
intel_i845g_info 200 188 -12
intel_i830_info 200 188 -12
intel_haswell_gt3_info 200 188 -12
intel_haswell_gt2_info 200 188 -12
intel_haswell_gt1_info 200 188 -12
intel_gm45_info 200 188 -12
intel_geminilake_info 200 188 -12
intel_g45_info 200 188 -12
intel_g33_info 200 188 -12
intel_coffeelake_gt3_info 200 188 -12
intel_coffeelake_gt2_info 200 188 -12
intel_coffeelake_gt1_info 200 188 -12
intel_cherryview_info 200 188 -12
intel_cannonlake_info 200 188 -12
intel_broxton_info 200 188 -12
intel_broadwell_rsvd_info 200 188 -12
intel_broadwell_gt3_info 200 188 -12
intel_broadwell_gt2_info 200 188 -12
intel_broadwell_gt1_info 200 188 -12
Total: Before=195529, After=194953, chg -0.29%
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
- TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
- .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
+ TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET } \
#define GEN_CHV_PIPEOFFSETS \
.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
CHV_PIPE_C_OFFSET }, \
.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
- CHV_TRANSCODER_C_OFFSET, }, \
- .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET, \
- CHV_PALETTE_C_OFFSET }
+ CHV_TRANSCODER_C_OFFSET, } \
#define CURSOR_OFFSETS \
.cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
/*
* Palette regs
*/
-#define PALETTE_A_OFFSET 0xa000
-#define PALETTE_B_OFFSET 0xa800
-#define CHV_PALETTE_C_OFFSET 0xc000
-#define PALETTE(pipe, i) _MMIO(dev_priv->info.palette_offsets[pipe] + \
- dev_priv->info.display_mmio_offset + (i) * 4)
+#define _PALETTE_A 0xa000
+#define _PALETTE_B 0xa800
+#define _CHV_PALETTE_C 0xc000
+#define PALETTE(pipe, i) _MMIO(dev_priv->info.display_mmio_offset + \
+ _PICK((pipe), _PALETTE_A, \
+ _PALETTE_B, _CHV_PALETTE_C) + \
+ (i) * 4)
/* MCH MMIO space */
#define MIPI_READ_DATA_VALID(port) _MMIO_MIPI(port, _MIPIA_READ_DATA_VALID, _MIPIC_READ_DATA_VALID)
#define READ_DATA_VALID(n) (1 << (n))
-/* For UMS only (deprecated): */
-#define _PALETTE_A (dev_priv->info.display_mmio_offset + 0xa000)
-#define _PALETTE_B (dev_priv->info.display_mmio_offset + 0xa800)
-
/* MOCS (Memory Object Control State) registers */
#define GEN9_LNCFCMOCS(i) _MMIO(0xb020 + (i) * 4) /* L3 Cache Control */
/* Register offsets for the various display pipes and transcoders */
int pipe_offsets[I915_MAX_TRANSCODERS];
int trans_offsets[I915_MAX_TRANSCODERS];
- int palette_offsets[I915_MAX_PIPES];
int cursor_offsets[I915_MAX_PIPES];
/* Slice/subslice/EU info */
projects / openwrt / staging / blogic.git / commitdiff