* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
-typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
+typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
sbmac_state_broken } sbmac_state_t;
#define ETHER_ALIGN 2
#define ETHER_ADDR_LEN 6
-#define ENET_PACKET_SIZE 1518
-/*#define ENET_PACKET_SIZE 9216 */
+#define ENET_PACKET_SIZE 1518
+/*#define ENET_PACKET_SIZE 9216 */
/**********************************************************************
* DMA Descriptor structure
********************************************************************* */
typedef struct sbmacdma_s {
-
- /*
+
+ /*
* This stuff is used to identify the channel and the registers
* associated with it.
*/
-
+
struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */
int sbdma_channel; /* channel number */
int sbdma_txdir; /* direction (1=transmit) */
volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */
volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */
volatile void __iomem *sbdma_curdscr; /* current descriptor address */
-
+
/*
* This stuff is for maintenance of the ring
*/
-
+
sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */
sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */
-
+
struct sk_buff **sbdma_ctxtable; /* context table, one per descr */
-
+
paddr_t sbdma_dscrtable_phys; /* and also the phys addr */
sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */
sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */
********************************************************************* */
struct sbmac_softc {
-
+
/*
* Linux-specific things
*/
-
+
struct net_device *sbm_dev; /* pointer to linux device */
spinlock_t sbm_lock; /* spin lock */
struct timer_list sbm_timer; /* for monitoring MII */
- struct net_device_stats sbm_stats;
+ struct net_device_stats sbm_stats;
int sbm_devflags; /* current device flags */
int sbm_phy_oldbmsr;
int sbm_phy_oldk1stsr;
int sbm_phy_oldlinkstat;
int sbm_buffersize;
-
+
unsigned char sbm_phys[2];
-
+
/*
* Controller-specific things
*/
-
+
volatile void __iomem *sbm_base; /* MAC's base address */
sbmac_state_t sbm_state; /* current state */
-
+
volatile void __iomem *sbm_macenable; /* MAC Enable Register */
volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */
volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */
volatile void __iomem *sbm_isr; /* Interrupt status register */
volatile void __iomem *sbm_imr; /* Interrupt mask register */
volatile void __iomem *sbm_mdio; /* MDIO register */
-
+
sbmac_speed_t sbm_speed; /* current speed */
sbmac_duplex_t sbm_duplex; /* current duplex */
sbmac_fc_t sbm_fc; /* current flow control setting */
-
+
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
-
+
sbmacdma_t sbm_txdma; /* for now, only use channel 0 */
sbmacdma_t sbm_rxdma;
int rx_hw_checksum;
/**********************************************************************
* SBMAC_MII_SYNC(s)
- *
+ *
* Synchronize with the MII - send a pattern of bits to the MII
* that will guarantee that it is ready to accept a command.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
int mac_mdio_genc;
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
-
+
bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
-
+
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
-
+
for (cnt = 0; cnt < 32; cnt++) {
__raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
/**********************************************************************
* SBMAC_MII_SENDDATA(s,data,bitcnt)
- *
+ *
* Send some bits to the MII. The bits to be sent are right-
* justified in the 'data' parameter.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* data - data to send
* bitcnt - number of bits to send
int mac_mdio_genc;
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
-
+
bits = M_MAC_MDIO_DIR_OUTPUT;
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
-
+
curmask = 1 << (bitcnt - 1);
-
+
for (i = 0; i < bitcnt; i++) {
if (data & curmask)
bits |= M_MAC_MDIO_OUT;
/**********************************************************************
* SBMAC_MII_READ(s,phyaddr,regidx)
- *
+ *
* Read a PHY register.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* phyaddr - PHY's address
* regidx = index of register to read
- *
+ *
* Return value:
* value read, or 0 if an error occurred.
********************************************************************* */
* Synchronize ourselves so that the PHY knows the next
* thing coming down is a command
*/
-
+
sbmac_mii_sync(s);
-
+
/*
* Send the data to the PHY. The sequence is
* a "start" command (2 bits)
* the PHY addr (5 bits)
* the register index (5 bits)
*/
-
+
sbmac_mii_senddata(s,MII_COMMAND_START, 2);
sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
sbmac_mii_senddata(s,phyaddr, 5);
sbmac_mii_senddata(s,regidx, 5);
-
+
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
-
- /*
+
+ /*
* Switch the port around without a clock transition.
*/
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
-
+
/*
* Send out a clock pulse to signal we want the status
*/
-
+
__raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
-
- /*
+
+ /*
* If an error occurred, the PHY will signal '1' back
*/
error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN;
-
- /*
+
+ /*
* Issue an 'idle' clock pulse, but keep the direction
* the same.
*/
__raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
-
+
regval = 0;
-
+
for (idx = 0; idx < 16; idx++) {
regval <<= 1;
-
+
if (error == 0) {
if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN)
regval |= 1;
}
-
+
__raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
}
-
+
/* Switch back to output */
__raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
-
+
if (error == 0)
return regval;
return 0;
/**********************************************************************
* SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
- *
+ *
* Write a value to a PHY register.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* phyaddr - PHY to use
* regidx - register within the PHY
* regval - data to write to register
- *
+ *
* Return value:
* nothing
********************************************************************* */
int mac_mdio_genc;
sbmac_mii_sync(s);
-
+
sbmac_mii_senddata(s,MII_COMMAND_START,2);
sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
sbmac_mii_senddata(s,phyaddr, 5);
/**********************************************************************
* SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
- *
+ *
* Initialize a DMA channel context. Since there are potentially
* eight DMA channels per MAC, it's nice to do this in a standard
- * way.
- *
- * Input parameters:
+ * way.
+ *
+ * Input parameters:
* d - sbmacdma_t structure (DMA channel context)
* s - sbmac_softc structure (pointer to a MAC)
* chan - channel number (0..1 right now)
* txrx - Identifies DMA_TX or DMA_RX for channel direction
* maxdescr - number of descriptors
- *
+ *
* Return value:
* nothing
********************************************************************* */
int txrx,
int maxdescr)
{
- /*
- * Save away interesting stuff in the structure
+ /*
+ * Save away interesting stuff in the structure
*/
-
+
d->sbdma_eth = s;
d->sbdma_channel = chan;
d->sbdma_txdir = txrx;
-
+
#if 0
/* RMON clearing */
s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)));
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)));
- /*
- * initialize register pointers
+ /*
+ * initialize register pointers
*/
-
- d->sbdma_config0 =
+
+ d->sbdma_config0 =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
- d->sbdma_config1 =
+ d->sbdma_config1 =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
- d->sbdma_dscrbase =
+ d->sbdma_dscrbase =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
- d->sbdma_dscrcnt =
+ d->sbdma_dscrcnt =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
- d->sbdma_curdscr =
+ d->sbdma_curdscr =
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
-
+
/*
* Allocate memory for the ring
*/
-
+
d->sbdma_maxdescr = maxdescr;
-
- d->sbdma_dscrtable = (sbdmadscr_t *)
+
+ d->sbdma_dscrtable = (sbdmadscr_t *)
kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL);
/*
*/
d->sbdma_dscrtable = (sbdmadscr_t *)
ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t));
-
+
memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t));
-
+
d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
-
+
d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
-
+
/*
* And context table
*/
-
- d->sbdma_ctxtable = (struct sk_buff **)
+
+ d->sbdma_ctxtable = (struct sk_buff **)
kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL);
-
+
memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *));
-
+
#ifdef CONFIG_SBMAC_COALESCE
/*
* Setup Rx/Tx DMA coalescing defaults
} else {
d->sbdma_int_pktcnt = 1;
}
-
+
if ( int_timeout ) {
d->sbdma_int_timeout = int_timeout;
} else {
/**********************************************************************
* SBDMA_CHANNEL_START(d)
- *
+ *
* Initialize the hardware registers for a DMA channel.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel to init (context must be previously init'd
* rxtx - DMA_RX or DMA_TX depending on what type of channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
/*
* Turn on the DMA channel
*/
-
+
#ifdef CONFIG_SBMAC_COALESCE
__raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
0, d->sbdma_config1);
/**********************************************************************
* SBDMA_CHANNEL_STOP(d)
- *
+ *
* Initialize the hardware registers for a DMA channel.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel to init (context must be previously init'd
- *
+ *
* Return value:
* nothing
********************************************************************* */
/*
* Turn off the DMA channel
*/
-
+
__raw_writeq(0, d->sbdma_config1);
-
+
__raw_writeq(0, d->sbdma_dscrbase);
-
+
__raw_writeq(0, d->sbdma_config0);
-
+
/*
* Zero ring pointers
*/
-
+
d->sbdma_addptr = NULL;
d->sbdma_remptr = NULL;
}
{
unsigned long addr;
unsigned long newaddr;
-
+
addr = (unsigned long) skb->data;
-
+
newaddr = (addr + power2 - 1) & ~(power2 - 1);
-
+
skb_reserve(skb,newaddr-addr+offset);
}
/**********************************************************************
* SBDMA_ADD_RCVBUFFER(d,sb)
- *
+ *
* Add a buffer to the specified DMA channel. For receive channels,
* this queues a buffer for inbound packets.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel descriptor
* sb - sk_buff to add, or NULL if we should allocate one
- *
+ *
* Return value:
* 0 if buffer could not be added (ring is full)
* 1 if buffer added successfully
sbdmadscr_t *nextdsc;
struct sk_buff *sb_new = NULL;
int pktsize = ENET_PACKET_SIZE;
-
+
/* get pointer to our current place in the ring */
-
+
dsc = d->sbdma_addptr;
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
-
+
/*
* figure out if the ring is full - if the next descriptor
* is the same as the one that we're going to remove from
* the ring, the ring is full
*/
-
+
if (nextdsc == d->sbdma_remptr) {
return -ENOSPC;
}
- /*
- * Allocate a sk_buff if we don't already have one.
+ /*
+ * Allocate a sk_buff if we don't already have one.
* If we do have an sk_buff, reset it so that it's empty.
*
* Note: sk_buffs don't seem to be guaranteed to have any sort
*
* 1. the data does not start in the middle of a cache line.
* 2. The data does not end in the middle of a cache line
- * 3. The buffer can be aligned such that the IP addresses are
+ * 3. The buffer can be aligned such that the IP addresses are
* naturally aligned.
*
* Remember, the SOCs MAC writes whole cache lines at a time,
* data portion starts in the middle of a cache line, the SOC
* DMA will trash the beginning (and ending) portions.
*/
-
+
if (sb == NULL) {
sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
if (sb_new == NULL) {
}
else {
sb_new = sb;
- /*
+ /*
* nothing special to reinit buffer, it's already aligned
* and sb->data already points to a good place.
*/
}
-
+
/*
- * fill in the descriptor
+ * fill in the descriptor
*/
-
+
#ifdef CONFIG_SBMAC_COALESCE
/*
* Do not interrupt per DMA transfer.
/* receiving: no options */
dsc->dscr_b = 0;
-
+
/*
- * fill in the context
+ * fill in the context
*/
-
+
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
-
- /*
- * point at next packet
+
+ /*
+ * point at next packet
*/
-
+
d->sbdma_addptr = nextdsc;
-
- /*
+
+ /*
* Give the buffer to the DMA engine.
*/
-
+
__raw_writeq(1, d->sbdma_dscrcnt);
-
+
return 0; /* we did it */
}
/**********************************************************************
* SBDMA_ADD_TXBUFFER(d,sb)
- *
+ *
* Add a transmit buffer to the specified DMA channel, causing a
* transmit to start.
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel descriptor
* sb - sk_buff to add
- *
+ *
* Return value:
* 0 transmit queued successfully
* otherwise error code
uint64_t phys;
uint64_t ncb;
int length;
-
+
/* get pointer to our current place in the ring */
-
+
dsc = d->sbdma_addptr;
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
-
+
/*
* figure out if the ring is full - if the next descriptor
* is the same as the one that we're going to remove from
* the ring, the ring is full
*/
-
+
if (nextdsc == d->sbdma_remptr) {
return -ENOSPC;
}
-
+
/*
* Under Linux, it's not necessary to copy/coalesce buffers
* like it is on NetBSD. We think they're all contiguous,
* but that may not be true for GBE.
*/
-
+
length = sb->len;
-
+
/*
* fill in the descriptor. Note that the number of cache
* blocks in the descriptor is the number of blocks
* *spanned*, so we need to add in the offset (if any)
* while doing the calculation.
*/
-
+
phys = virt_to_phys(sb->data);
ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
- dsc->dscr_a = phys |
+ dsc->dscr_a = phys |
V_DMA_DSCRA_A_SIZE(ncb) |
#ifndef CONFIG_SBMAC_COALESCE
M_DMA_DSCRA_INTERRUPT |
#endif
M_DMA_ETHTX_SOP;
-
+
/* transmitting: set outbound options and length */
dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
V_DMA_DSCRB_PKT_SIZE(length);
-
+
/*
- * fill in the context
+ * fill in the context
*/
-
+
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
-
- /*
- * point at next packet
+
+ /*
+ * point at next packet
*/
-
+
d->sbdma_addptr = nextdsc;
-
- /*
+
+ /*
* Give the buffer to the DMA engine.
*/
-
+
__raw_writeq(1, d->sbdma_dscrcnt);
-
+
return 0; /* we did it */
}
/**********************************************************************
* SBDMA_EMPTYRING(d)
- *
+ *
* Free all allocated sk_buffs on the specified DMA channel;
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
{
int idx;
struct sk_buff *sb;
-
+
for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
sb = d->sbdma_ctxtable[idx];
if (sb) {
/**********************************************************************
* SBDMA_FILLRING(d)
- *
+ *
* Fill the specified DMA channel (must be receive channel)
* with sk_buffs
- *
- * Input parameters:
+ *
+ * Input parameters:
* d - DMA channel
- *
+ *
* Return value:
* nothing
********************************************************************* */
static void sbdma_fillring(sbmacdma_t *d)
{
int idx;
-
+
for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
if (sbdma_add_rcvbuffer(d,NULL) != 0)
break;
/**********************************************************************
* SBDMA_RX_PROCESS(sc,d)
- *
- * Process "completed" receive buffers on the specified DMA channel.
+ *
+ * Process "completed" receive buffers on the specified DMA channel.
* Note that this isn't really ideal for priority channels, since
- * it processes all of the packets on a given channel before
- * returning.
+ * it processes all of the packets on a given channel before
+ * returning.
*
- * Input parameters:
+ * Input parameters:
* sc - softc structure
* d - DMA channel context
- *
+ *
* Return value:
* nothing
********************************************************************* */
sbdmadscr_t *dsc;
struct sk_buff *sb;
int len;
-
+
for (;;) {
- /*
+ /*
* figure out where we are (as an index) and where
* the hardware is (also as an index)
*
- * This could be done faster if (for example) the
+ * This could be done faster if (for example) the
* descriptor table was page-aligned and contiguous in
* both virtual and physical memory -- you could then
* just compare the low-order bits of the virtual address
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
*/
-
+
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
-
+
/*
* If they're the same, that means we've processed all
* of the descriptors up to (but not including) the one that
* the hardware is working on right now.
*/
-
+
if (curidx == hwidx)
break;
-
+
/*
* Otherwise, get the packet's sk_buff ptr back
*/
-
+
dsc = &(d->sbdma_dscrtable[curidx]);
sb = d->sbdma_ctxtable[curidx];
d->sbdma_ctxtable[curidx] = NULL;
-
+
len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
-
+
/*
* Check packet status. If good, process it.
* If not, silently drop it and put it back on the
* receive ring.
*/
-
+
if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) {
-
+
/*
* Add a new buffer to replace the old one. If we fail
* to allocate a buffer, we're going to drop this
* packet and put it right back on the receive ring.
*/
-
+
if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) {
sc->sbm_stats.rx_dropped++;
sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
* Set length into the packet
*/
skb_put(sb,len);
-
+
/*
* Buffer has been replaced on the
* receive ring. Pass the buffer to
sb->ip_summed = CHECKSUM_NONE;
}
}
-
+
netif_rx(sb);
}
} else {
sc->sbm_stats.rx_errors++;
sbdma_add_rcvbuffer(d,sb);
}
-
-
- /*
+
+
+ /*
* .. and advance to the next buffer.
*/
-
+
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
-
+
}
}
/**********************************************************************
* SBDMA_TX_PROCESS(sc,d)
- *
- * Process "completed" transmit buffers on the specified DMA channel.
+ *
+ * Process "completed" transmit buffers on the specified DMA channel.
* This is normally called within the interrupt service routine.
* Note that this isn't really ideal for priority channels, since
- * it processes all of the packets on a given channel before
- * returning.
+ * it processes all of the packets on a given channel before
+ * returning.
*
- * Input parameters:
+ * Input parameters:
* sc - softc structure
* d - DMA channel context
- *
+ *
* Return value:
* nothing
********************************************************************* */
unsigned long flags;
spin_lock_irqsave(&(sc->sbm_lock), flags);
-
+
for (;;) {
- /*
+ /*
* figure out where we are (as an index) and where
* the hardware is (also as an index)
*
- * This could be done faster if (for example) the
+ * This could be done faster if (for example) the
* descriptor table was page-aligned and contiguous in
* both virtual and physical memory -- you could then
* just compare the low-order bits of the virtual address
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
*/
-
+
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
* of the descriptors up to (but not including) the one that
* the hardware is working on right now.
*/
-
+
if (curidx == hwidx)
break;
-
+
/*
* Otherwise, get the packet's sk_buff ptr back
*/
-
+
dsc = &(d->sbdma_dscrtable[curidx]);
sb = d->sbdma_ctxtable[curidx];
d->sbdma_ctxtable[curidx] = NULL;
-
+
/*
* Stats
*/
-
+
sc->sbm_stats.tx_bytes += sb->len;
sc->sbm_stats.tx_packets++;
-
+
/*
* for transmits, we just free buffers.
*/
-
+
dev_kfree_skb_irq(sb);
-
- /*
+
+ /*
* .. and advance to the next buffer.
*/
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
-
+
}
-
+
/*
* Decide if we should wake up the protocol or not.
* Other drivers seem to do this when we reach a low
* watermark on the transmit queue.
*/
-
+
netif_wake_queue(d->sbdma_eth->sbm_dev);
-
+
spin_unlock_irqrestore(&(sc->sbm_lock), flags);
-
+
}
/**********************************************************************
* SBMAC_INITCTX(s)
- *
+ *
* Initialize an Ethernet context structure - this is called
* once per MAC on the 1250. Memory is allocated here, so don't
* call it again from inside the ioctl routines that bring the
* interface up/down
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac context structure
- *
+ *
* Return value:
* 0
********************************************************************* */
static int sbmac_initctx(struct sbmac_softc *s)
{
-
- /*
- * figure out the addresses of some ports
+
+ /*
+ * figure out the addresses of some ports
*/
-
+
s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
s->sbm_maccfg = s->sbm_base + R_MAC_CFG;
s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG;
s->sbm_phy_oldanlpar = 0;
s->sbm_phy_oldk1stsr = 0;
s->sbm_phy_oldlinkstat = 0;
-
+
/*
* Initialize the DMA channels. Right now, only one per MAC is used
* Note: Only do this _once_, as it allocates memory from the kernel!
*/
-
+
sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
-
+
/*
* initial state is OFF
*/
-
+
s->sbm_state = sbmac_state_off;
-
+
/*
* Initial speed is (XXX TEMP) 10MBit/s HDX no FC
*/
-
+
s->sbm_speed = sbmac_speed_10;
s->sbm_duplex = sbmac_duplex_half;
s->sbm_fc = sbmac_fc_disabled;
-
+
return 0;
}
kfree(d->sbdma_dscrtable);
d->sbdma_dscrtable = NULL;
}
-
+
if (d->sbdma_ctxtable) {
kfree(d->sbdma_ctxtable);
d->sbdma_ctxtable = NULL;
/**********************************************************************
* SBMAC_CHANNEL_START(s)
- *
+ *
* Start packet processing on this MAC.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
volatile void __iomem *port;
uint64_t cfg,fifo,framecfg;
int idx, th_value;
-
+
/*
* Don't do this if running
*/
if (s->sbm_state == sbmac_state_on)
return;
-
+
/*
* Bring the controller out of reset, but leave it off.
*/
-
+
__raw_writeq(0, s->sbm_macenable);
-
+
/*
* Ignore all received packets
*/
-
+
__raw_writeq(0, s->sbm_rxfilter);
-
- /*
+
+ /*
* Calculate values for various control registers.
*/
-
+
cfg = M_MAC_RETRY_EN |
- M_MAC_TX_HOLD_SOP_EN |
+ M_MAC_TX_HOLD_SOP_EN |
V_MAC_TX_PAUSE_CNT_16K |
M_MAC_AP_STAT_EN |
M_MAC_FAST_SYNC |
M_MAC_SS_EN |
0;
-
- /*
+
+ /*
* Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
* Use a larger RD_THRSH for gigabit
*/
- if (periph_rev >= 2)
+ if (periph_rev >= 2)
th_value = 64;
- else
+ else
th_value = 28;
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
V_MAC_BACKOFF_SEL(1);
/*
- * Clear out the hash address map
+ * Clear out the hash address map
*/
-
+
port = s->sbm_base + R_MAC_HASH_BASE;
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
__raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Clear out the exact-match table
*/
-
+
port = s->sbm_base + R_MAC_ADDR_BASE;
for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
__raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Clear out the DMA Channel mapping table registers
*/
-
+
port = s->sbm_base + R_MAC_CHUP0_BASE;
for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
__raw_writeq(0, port);
__raw_writeq(0, port);
port += sizeof(uint64_t);
}
-
+
/*
* Program the hardware address. It goes into the hardware-address
* register as well as the first filter register.
*/
-
+
reg = sbmac_addr2reg(s->sbm_hwaddr);
-
+
port = s->sbm_base + R_MAC_ADDR_BASE;
__raw_writeq(reg, port);
port = s->sbm_base + R_MAC_ETHERNET_ADDR;
#else
__raw_writeq(reg, port);
#endif
-
+
/*
* Set the receive filter for no packets, and write values
* to the various config registers
*/
-
+
__raw_writeq(0, s->sbm_rxfilter);
__raw_writeq(0, s->sbm_imr);
__raw_writeq(framecfg, s->sbm_framecfg);
__raw_writeq(fifo, s->sbm_fifocfg);
__raw_writeq(cfg, s->sbm_maccfg);
-
+
/*
* Initialize DMA channels (rings should be ok now)
*/
-
+
sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
-
+
/*
* Configure the speed, duplex, and flow control
*/
sbmac_set_speed(s,s->sbm_speed);
sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
-
+
/*
* Fill the receive ring
*/
-
+
sbdma_fillring(&(s->sbm_rxdma));
-
- /*
+
+ /*
* Turn on the rest of the bits in the enable register
- */
-
+ */
+
__raw_writeq(M_MAC_RXDMA_EN0 |
M_MAC_TXDMA_EN0 |
M_MAC_RX_ENABLE |
M_MAC_TX_ENABLE, s->sbm_macenable);
-
-
+
+
#ifdef CONFIG_SBMAC_COALESCE
__raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
(M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr);
#endif
-
- /*
- * Enable receiving unicasts and broadcasts
+
+ /*
+ * Enable receiving unicasts and broadcasts
*/
-
+
__raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter);
-
+
/*
- * we're running now.
+ * we're running now.
*/
-
+
s->sbm_state = sbmac_state_on;
-
- /*
- * Program multicast addresses
+
+ /*
+ * Program multicast addresses
*/
-
+
sbmac_setmulti(s);
-
- /*
- * If channel was in promiscuous mode before, turn that on
+
+ /*
+ * If channel was in promiscuous mode before, turn that on
*/
-
+
if (s->sbm_devflags & IFF_PROMISC) {
sbmac_promiscuous_mode(s,1);
}
-
+
}
/**********************************************************************
* SBMAC_CHANNEL_STOP(s)
- *
+ *
* Stop packet processing on this MAC.
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
static void sbmac_channel_stop(struct sbmac_softc *s)
{
/* don't do this if already stopped */
-
+
if (s->sbm_state == sbmac_state_off)
return;
-
+
/* don't accept any packets, disable all interrupts */
-
+
__raw_writeq(0, s->sbm_rxfilter);
__raw_writeq(0, s->sbm_imr);
-
+
/* Turn off ticker */
-
+
/* XXX */
-
+
/* turn off receiver and transmitter */
-
+
__raw_writeq(0, s->sbm_macenable);
-
+
/* We're stopped now. */
-
+
s->sbm_state = sbmac_state_off;
-
+
/*
* Stop DMA channels (rings should be ok now)
*/
-
+
sbdma_channel_stop(&(s->sbm_rxdma));
sbdma_channel_stop(&(s->sbm_txdma));
-
+
/* Empty the receive and transmit rings */
-
+
sbdma_emptyring(&(s->sbm_rxdma));
sbdma_emptyring(&(s->sbm_txdma));
-
+
}
/**********************************************************************
* SBMAC_SET_CHANNEL_STATE(state)
- *
+ *
* Set the channel's state ON or OFF
- *
- * Input parameters:
+ *
+ * Input parameters:
* state - new state
- *
+ *
* Return value:
* old state
********************************************************************* */
sbmac_state_t state)
{
sbmac_state_t oldstate = sc->sbm_state;
-
+
/*
* If same as previous state, return
*/
-
+
if (state == oldstate) {
return oldstate;
}
-
+
/*
- * If new state is ON, turn channel on
+ * If new state is ON, turn channel on
*/
-
+
if (state == sbmac_state_on) {
sbmac_channel_start(sc);
}
else {
sbmac_channel_stop(sc);
}
-
+
/*
* Return previous state
*/
-
+
return oldstate;
}
/**********************************************************************
* SBMAC_PROMISCUOUS_MODE(sc,onoff)
- *
+ *
* Turn on or off promiscuous mode
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
* onoff - 1 to turn on, 0 to turn off
- *
+ *
* Return value:
* nothing
********************************************************************* */
static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
{
uint64_t reg;
-
+
if (sc->sbm_state != sbmac_state_on)
return;
-
+
if (onoff) {
reg = __raw_readq(sc->sbm_rxfilter);
reg |= M_MAC_ALLPKT_EN;
__raw_writeq(reg, sc->sbm_rxfilter);
- }
+ }
else {
reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~M_MAC_ALLPKT_EN;
/**********************************************************************
* SBMAC_SETIPHDR_OFFSET(sc,onoff)
- *
+ *
* Set the iphdr offset as 15 assuming ethernet encapsulation
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
- *
+ *
* Return value:
* nothing
********************************************************************* */
static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
{
uint64_t reg;
-
+
/* Hard code the off set to 15 for now */
reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
__raw_writeq(reg, sc->sbm_rxfilter);
-
+
/* read system identification to determine revision */
if (periph_rev >= 2) {
sc->rx_hw_checksum = ENABLE;
/**********************************************************************
* SBMAC_ADDR2REG(ptr)
- *
+ *
* Convert six bytes into the 64-bit register value that
* we typically write into the SBMAC's address/mcast registers
- *
- * Input parameters:
+ *
+ * Input parameters:
* ptr - pointer to 6 bytes
- *
+ *
* Return value:
* register value
********************************************************************* */
static uint64_t sbmac_addr2reg(unsigned char *ptr)
{
uint64_t reg = 0;
-
+
ptr += 6;
-
- reg |= (uint64_t) *(--ptr);
+
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
+ reg |= (uint64_t) *(--ptr);
reg <<= 8;
- reg |= (uint64_t) *(--ptr);
-
+ reg |= (uint64_t) *(--ptr);
+
return reg;
}
/**********************************************************************
* SBMAC_SET_SPEED(s,speed)
- *
+ *
* Configure LAN speed for the specified MAC.
* Warning: must be called when MAC is off!
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* speed - speed to set MAC to (see sbmac_speed_t enum)
- *
+ *
* Return value:
* 1 if successful
* 0 indicates invalid parameters
/*
* Save new current values
*/
-
+
s->sbm_speed = speed;
-
+
if (s->sbm_state == sbmac_state_on)
return 0; /* save for next restart */
/*
- * Read current register values
+ * Read current register values
*/
-
+
cfg = __raw_readq(s->sbm_maccfg);
framecfg = __raw_readq(s->sbm_framecfg);
-
+
/*
* Mask out the stuff we want to change
*/
-
+
cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
M_MAC_SLOT_SIZE);
-
+
/*
* Now add in the new bits
*/
-
+
switch (speed) {
case sbmac_speed_10:
framecfg |= V_MAC_IFG_RX_10 |
V_MAC_SLOT_SIZE_10;
cfg |= V_MAC_SPEED_SEL_10MBPS;
break;
-
+
case sbmac_speed_100:
framecfg |= V_MAC_IFG_RX_100 |
V_MAC_IFG_TX_100 |
V_MAC_SLOT_SIZE_100;
cfg |= V_MAC_SPEED_SEL_100MBPS ;
break;
-
+
case sbmac_speed_1000:
framecfg |= V_MAC_IFG_RX_1000 |
V_MAC_IFG_TX_1000 |
V_MAC_SLOT_SIZE_1000;
cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
break;
-
+
case sbmac_speed_auto: /* XXX not implemented */
/* fall through */
default:
return 0;
}
-
+
/*
- * Send the bits back to the hardware
+ * Send the bits back to the hardware
*/
-
+
__raw_writeq(framecfg, s->sbm_framecfg);
__raw_writeq(cfg, s->sbm_maccfg);
-
+
return 1;
}
/**********************************************************************
* SBMAC_SET_DUPLEX(s,duplex,fc)
- *
+ *
* Set Ethernet duplex and flow control options for this MAC
* Warning: must be called when MAC is off!
- *
- * Input parameters:
+ *
+ * Input parameters:
* s - sbmac structure
* duplex - duplex setting (see sbmac_duplex_t)
* fc - flow control setting (see sbmac_fc_t)
- *
+ *
* Return value:
* 1 if ok
* 0 if an invalid parameter combination was specified
static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc)
{
uint64_t cfg;
-
+
/*
* Save new current values
*/
-
+
s->sbm_duplex = duplex;
s->sbm_fc = fc;
-
+
if (s->sbm_state == sbmac_state_on)
return 0; /* save for next restart */
-
+
/*
- * Read current register values
+ * Read current register values
*/
-
+
cfg = __raw_readq(s->sbm_maccfg);
-
+
/*
* Mask off the stuff we're about to change
*/
-
+
cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
-
-
+
+
switch (duplex) {
case sbmac_duplex_half:
switch (fc) {
case sbmac_fc_disabled:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
break;
-
+
case sbmac_fc_collision:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
break;
-
+
case sbmac_fc_carrier:
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
break;
-
+
case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
+ /* fall through */
case sbmac_fc_frame: /* not valid in half duplex */
default: /* invalid selection */
return 0;
}
break;
-
+
case sbmac_duplex_full:
switch (fc) {
case sbmac_fc_disabled:
cfg |= V_MAC_FC_CMD_DISABLED;
break;
-
+
case sbmac_fc_frame:
cfg |= V_MAC_FC_CMD_ENABLED;
break;
-
+
case sbmac_fc_collision: /* not valid in full duplex */
case sbmac_fc_carrier: /* not valid in full duplex */
case sbmac_fc_auto: /* XXX not implemented */
- /* fall through */
+ /* fall through */
default:
return 0;
}
/* XXX not implemented */
break;
}
-
+
/*
- * Send the bits back to the hardware
+ * Send the bits back to the hardware
*/
-
+
__raw_writeq(cfg, s->sbm_maccfg);
-
+
return 1;
}
/**********************************************************************
* SBMAC_INTR()
- *
+ *
* Interrupt handler for MAC interrupts
- *
- * Input parameters:
+ *
+ * Input parameters:
* MAC structure
- *
+ *
* Return value:
* nothing
********************************************************************* */
int handled = 0;
for (;;) {
-
+
/*
* Read the ISR (this clears the bits in the real
* register, except for counter addr)
*/
-
+
isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
-
+
if (isr == 0)
break;
handled = 1;
-
+
/*
* Transmits on channel 0
*/
-
+
if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
sbdma_tx_process(sc,&(sc->sbm_txdma));
}
-
+
/*
* Receives on channel 0
*/
* EOP_SEEN here takes care of this case.
* (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0)
*/
-
-
+
+
if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
sbdma_rx_process(sc,&(sc->sbm_rxdma));
}
/**********************************************************************
* SBMAC_START_TX(skb,dev)
- *
- * Start output on the specified interface. Basically, we
+ *
+ * Start output on the specified interface. Basically, we
* queue as many buffers as we can until the ring fills up, or
* we run off the end of the queue, whichever comes first.
- *
- * Input parameters:
- *
- *
+ *
+ * Input parameters:
+ *
+ *
* Return value:
* nothing
********************************************************************* */
static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
/* lock eth irq */
spin_lock_irq (&sc->sbm_lock);
-
+
/*
- * Put the buffer on the transmit ring. If we
+ * Put the buffer on the transmit ring. If we
* don't have room, stop the queue.
*/
-
+
if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
/* XXX save skb that we could not send */
netif_stop_queue(dev);
return 1;
}
-
+
dev->trans_start = jiffies;
-
+
spin_unlock_irq (&sc->sbm_lock);
-
+
return 0;
}
/**********************************************************************
* SBMAC_SETMULTI(sc)
- *
+ *
* Reprogram the multicast table into the hardware, given
* the list of multicasts associated with the interface
* structure.
- *
- * Input parameters:
+ *
+ * Input parameters:
* sc - softc
- *
+ *
* Return value:
* nothing
********************************************************************* */
int idx;
struct dev_mc_list *mclist;
struct net_device *dev = sc->sbm_dev;
-
- /*
+
+ /*
* Clear out entire multicast table. We do this by nuking
* the entire hash table and all the direct matches except
- * the first one, which is used for our station address
+ * the first one, which is used for our station address
*/
-
+
for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
__raw_writeq(0, port);
}
-
+
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
__raw_writeq(0, port);
}
-
+
/*
* Clear the filter to say we don't want any multicasts.
*/
-
+
reg = __raw_readq(sc->sbm_rxfilter);
reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
__raw_writeq(reg, sc->sbm_rxfilter);
-
+
if (dev->flags & IFF_ALLMULTI) {
- /*
- * Enable ALL multicasts. Do this by inverting the
- * multicast enable bit.
+ /*
+ * Enable ALL multicasts. Do this by inverting the
+ * multicast enable bit.
*/
reg = __raw_readq(sc->sbm_rxfilter);
reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
__raw_writeq(reg, sc->sbm_rxfilter);
return;
}
-
- /*
+
+ /*
* Progam new multicast entries. For now, only use the
* perfect filter. In the future we'll need to use the
* hash filter if the perfect filter overflows
*/
-
+
/* XXX only using perfect filter for now, need to use hash
* XXX if the table overflows */
-
+
idx = 1; /* skip station address */
mclist = dev->mc_list;
while (mclist && (idx < MAC_ADDR_COUNT)) {
idx++;
mclist = mclist->next;
}
-
- /*
+
+ /*
* Enable the "accept multicast bits" if we programmed at least one
- * multicast.
+ * multicast.
*/
-
+
if (idx > 1) {
reg = __raw_readq(sc->sbm_rxfilter);
reg |= M_MAC_MCAST_EN;
#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
/**********************************************************************
* SBMAC_PARSE_XDIGIT(str)
- *
+ *
* Parse a hex digit, returning its value
- *
- * Input parameters:
+ *
+ * Input parameters:
* str - character
- *
+ *
* Return value:
* hex value, or -1 if invalid
********************************************************************* */
static int sbmac_parse_xdigit(char str)
{
int digit;
-
+
if ((str >= '0') && (str <= '9'))
digit = str - '0';
else if ((str >= 'a') && (str <= 'f'))
digit = str - 'A' + 10;
else
return -1;
-
+
return digit;
}
/**********************************************************************
* SBMAC_PARSE_HWADDR(str,hwaddr)
- *
+ *
* Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
* Ethernet address.
- *
- * Input parameters:
+ *
+ * Input parameters:
* str - string
* hwaddr - pointer to hardware address
- *
+ *
* Return value:
* 0 if ok, else -1
********************************************************************* */
{
int digit1,digit2;
int idx = 6;
-
+
while (*str && (idx > 0)) {
digit1 = sbmac_parse_xdigit(*str);
if (digit1 < 0)
str++;
if (!*str)
return -1;
-
+
if ((*str == ':') || (*str == '-')) {
digit2 = digit1;
digit1 = 0;
return -1;
str++;
}
-
+
*hwaddr++ = (digit1 << 4) | digit2;
idx--;
-
+
if (*str == '-')
str++;
if (*str == ':')
/**********************************************************************
* SBMAC_INIT(dev)
- *
+ *
* Attach routine - init hardware and hook ourselves into linux
- *
- * Input parameters:
+ *
+ * Input parameters:
* dev - net_device structure
- *
+ *
* Return value:
* status
********************************************************************* */
uint64_t ea_reg;
int i;
int err;
-
+
sc = netdev_priv(dev);
-
+
/* Determine controller base address */
-
+
sc->sbm_base = IOADDR(dev->base_addr);
sc->sbm_dev = dev;
sc->sbe_idx = idx;
-
+
eaddr = sc->sbm_hwaddr;
-
- /*
+
+ /*
* Read the ethernet address. The firwmare left this programmed
* for us in the ethernet address register for each mac.
*/
-
+
ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR);
__raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR);
for (i = 0; i < 6; i++) {
eaddr[i] = (uint8_t) (ea_reg & 0xFF);
ea_reg >>= 8;
}
-
+
for (i = 0; i < 6; i++) {
dev->dev_addr[i] = eaddr[i];
}
-
-
+
+
/*
- * Init packet size
+ * Init packet size
*/
-
+
sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
- /*
+ /*
* Initialize context (get pointers to registers and stuff), then
* allocate the memory for the descriptor tables.
*/
-
+
sbmac_initctx(sc);
-
+
/*
* Set up Linux device callins
*/
-
+
spin_lock_init(&(sc->sbm_lock));
-
+
dev->open = sbmac_open;
dev->hard_start_xmit = sbmac_start_tx;
dev->stop = sbmac_close;
* was being displayed)
*/
printk(KERN_INFO
- "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ "%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
dev->name, dev->base_addr,
eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]);
-
+
return 0;
static int sbmac_open(struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
if (debug > 1) {
printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
}
-
- /*
+
+ /*
* map/route interrupt (clear status first, in case something
* weird is pending; we haven't initialized the mac registers
* yet)
return -EBUSY;
/*
- * Configure default speed
+ * Configure default speed
*/
sbmac_mii_poll(sc,noisy_mii);
-
+
/*
* Turn on the channel
*/
sbmac_set_channel_state(sc,sbmac_state_on);
-
+
/*
* XXX Station address is in dev->dev_addr
*/
-
+
if (dev->if_port == 0)
- dev->if_port = 0;
-
+ dev->if_port = 0;
+
netif_start_queue(dev);
-
+
sbmac_set_rx_mode(dev);
-
+
/* Set the timer to check for link beat. */
init_timer(&sc->sbm_timer);
sc->sbm_timer.expires = jiffies + 2 * HZ/100;
sc->sbm_timer.data = (unsigned long)dev;
sc->sbm_timer.function = &sbmac_timer;
add_timer(&sc->sbm_timer);
-
+
return 0;
}
int mii_status;
spin_lock_irq (&sc->sbm_lock);
-
+
/* make IFF_RUNNING follow the MII status bit "Link established" */
mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
-
+
if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
if (mii_status & BMSR_LINKSTAT) {
netif_carrier_on(dev);
}
else {
- netif_carrier_off(dev);
+ netif_carrier_off(dev);
}
}
-
+
/*
* Poll the PHY to see what speed we should be running at
*/
sbmac_channel_start(sc);
}
}
-
+
spin_unlock_irq (&sc->sbm_lock);
-
+
sc->sbm_timer.expires = jiffies + next_tick;
add_timer(&sc->sbm_timer);
}
static void sbmac_tx_timeout (struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
-
+
spin_lock_irq (&sc->sbm_lock);
-
-
+
+
dev->trans_start = jiffies;
sc->sbm_stats.tx_errors++;
-
+
spin_unlock_irq (&sc->sbm_lock);
printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
{
struct sbmac_softc *sc = netdev_priv(dev);
unsigned long flags;
-
+
spin_lock_irqsave(&sc->sbm_lock, flags);
-
+
/* XXX update other stats here */
-
+
spin_unlock_irqrestore(&sc->sbm_lock, flags);
-
+
return &sc->sbm_stats;
}
/*
* Promiscuous changed.
*/
-
- if (dev->flags & IFF_PROMISC) {
+
+ if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
msg_flag = 1;
sbmac_promiscuous_mode(sc,1);
}
}
spin_unlock_irqrestore(&sc->sbm_lock, flags);
-
+
if (msg_flag) {
printk(KERN_NOTICE "%s: Promiscuous mode %sabled.\n",
dev->name,(msg_flag==1)?"en":"dis");
}
-
+
/*
* Program the multicasts. Do this every time.
*/
-
+
sbmac_setmulti(sc);
-
+
}
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
u16 *data = (u16 *)&rq->ifr_ifru;
unsigned long flags;
int retval;
-
+
spin_lock_irqsave(&sc->sbm_lock, flags);
retval = 0;
-
+
switch(cmd) {
case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
data[0] = sc->sbm_phys[0] & 0x1f;
default:
retval = -EOPNOTSUPP;
}
-
+
spin_unlock_irqrestore(&sc->sbm_lock, flags);
return retval;
}
sbdma_emptyring(&(sc->sbm_txdma));
sbdma_emptyring(&(sc->sbm_rxdma));
-
+
return 0;
}
struct net_device *dev;
unsigned long port;
int chip_max_units;
-
+
/*
* For bringup when not using the firmware, we can pre-fill
* the MAC addresses using the environment variables
port = A_MAC_CHANNEL_BASE(idx);
- /*
+ /*
* The R_MAC_ETHERNET_ADDR register will be set to some nonzero
* value for us by the firmware if we're going to use this MAC.
* If we find a zero, skip this MAC.
*/
dev = alloc_etherdev(sizeof(struct sbmac_softc));
- if (!dev)
+ if (!dev)
return -ENOMEM; /* return ENOMEM */
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
projects / openwrt / staging / blogic.git / commitdiff