* - MikroTik RouterBOARD 750UP r2
* - MikroTik RouterBOARD 750 r2
*
+ * Preliminary support for the following hardware
+ * - MikroTik RouterBOARD wAP2nD
+ * - MikroTik RouterBOARD cAP2nD
+ * - MikroTik RouterBOARD mAP2nD
+ * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
+ * hardware as the mAP L-2nD. It is unknown if they share the same board
+ * identifier.
+ *
* Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify it
#define RB952_GPIO_SSR_CS 11
#define RB952_GPIO_LED_USER 4
#define RB952_GPIO_POE_POWER 14
+#define RB952_GPIO_POE_STATUS 12
#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
},
};
+/* RB wAP-2nD gpios */
+#define RBWAP_GPIO_LED_USER 14
+#define RBWAP_GPIO_LED_WLAN 11
+
+static struct gpio_led rbwap_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RBWAP_GPIO_LED_USER,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:wlan",
+ .gpio = RBWAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+/* RB cAP-2nD gpios */
+#define RBCAP_GPIO_LED_1 14
+#define RBCAP_GPIO_LED_2 12
+#define RBCAP_GPIO_LED_3 11
+#define RBCAP_GPIO_LED_4 4
+#define RBCAP_GPIO_LED_ALL 13
+
+static struct gpio_led rbcap_leds[] __initdata = {
+ {
+ .name = "rb:green:rssi1",
+ .gpio = RBCAP_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi2",
+ .gpio = RBCAP_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi3",
+ .gpio = RBCAP_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:rssi4",
+ .gpio = RBCAP_GPIO_LED_4,
+ .active_low = 1,
+ },
+};
+
+/* RB mAP-2nD gpios */
+#define RBMAP_SSR_BIT_LED_LAN1 0
+#define RBMAP_SSR_BIT_LED_LAN2 1
+#define RBMAP_SSR_BIT_LED_POEO 2
+#define RBMAP_SSR_BIT_LED_USER 3
+#define RBMAP_SSR_BIT_LED_WLAN 4
+#define RBMAP_SSR_BIT_USB_POWER 5
+#define RBMAP_SSR_BIT_LED_APCAP 6
+#define RBMAP_GPIO_SSR_CS 11
+#define RBMAP_GPIO_LED_POWER 4
+#define RBMAP_GPIO_POE_POWER 14
+#define RBMAP_GPIO_POE_STATUS 12
+#define RBMAP_GPIO_USB_POWER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
+#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1)
+#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2)
+#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO)
+#define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER)
+#define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN)
+#define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP)
+
+static struct gpio_led rbmap_leds[] __initdata = {
+ {
+ .name = "rb:green:power",
+ .gpio = RBMAP_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "rb:green:eth1",
+ .gpio = RBMAP_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:eth2",
+ .gpio = RBMAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "rb:red:poe_out",
+ .gpio = RBMAP_GPIO_LED_POEO,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:user",
+ .gpio = RBMAP_GPIO_LED_USER,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:wlan",
+ .gpio = RBMAP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:ap_cap",
+ .gpio = RBMAP_GPIO_LED_APCAP,
+ .active_low = 1,
+ },
+};
+
+
static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
.base = RBSPI_SSR_GPIO_BASE,
};
rbspi_952_750r2_setup(flags);
}
+/*
+ * Init the wAP hardware (EXPERIMENTAL).
+ * The wAP 2nD has a single ethernet port.
+ */
+static void __init rbwap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds);
+}
+
+/*
+ * Init the cAP hardware (EXPERIMENTAL).
+ * The cAP 2nD has a single ethernet port, and a global LED switch.
+ */
+static void __init rbcap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1);
+
+ gpio_request_one(RBCAP_GPIO_LED_ALL,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LEDs enable");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds), rbcap_leds);
+}
+
+/*
+ * Init the mAP hardware (EXPERIMENTAL).
+ * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED
+ * multiplexing.
+ */
+static void __init rbmap_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_SSR | RBSPI_HAS_POE;
+
+ if (rbspi_platform_setup())
+ return;
+
+ rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS;
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 2 */
+ rbspi_network_setup(flags, 0, 2);
+
+ if (flags & RBSPI_HAS_POE)
+ gpio_request_one(RBMAP_GPIO_POE_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds);
+}
+
+
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup);
projects / openwrt / staging / yousong.git / commitdiff