#include <linux/string.h>
#define NONE 0xFFFF
-//--------------------------------------------------------------------------------
/* TYPE and SUBTYPE
* Define valid TYPE (or category or code-path, however you like to think of it)
* and SUBTYPE s.
* Type and SubType are treated as bitmasks.
*/
-/*-----------------BEGIN TYPEs------------------------------------------*/
-#define DBG_TYPE_INITEXIT (1 << 0) // 1
-#define DBG_TYPE_TX (1 << 1) // 2
-#define DBG_TYPE_RX (1 << 2) // 4
-#define DBG_TYPE_OTHERS (1 << 3) // 8
-/*-----------------END TYPEs------------------------------------------*/
-#define NUMTYPES 4 // careful!
-/*-----------------BEGIN SUBTYPEs---------------------------------------*/
-
-/*-SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----//
- Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
- total 17 macros */
-// Transmit.c
+#define DBG_TYPE_INITEXIT (1 << 0) /* 1 */
+#define DBG_TYPE_TX (1 << 1) /* 2 */
+#define DBG_TYPE_RX (1 << 2) /* 4 */
+#define DBG_TYPE_OTHERS (1 << 3) /* 8 */
+#define NUMTYPES 4
+
+/* -SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----//
+ * Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
+ * total 17 macros
+ */
+/* Transmit.c */
#define TX 1
#define MP_SEND (TX << 0)
#define NEXT_SEND (TX << 1)
#define TX_FIFO (TX << 2)
#define TX_CONTROL (TX << 3)
-// Arp.c
+/* Arp.c */
#define IP_ADDR (TX << 4)
#define ARP_REQ (TX << 5)
#define ARP_RESP (TX << 6)
-// Leakybucket.c
+/* Leakybucket.c */
#define TOKEN_COUNTS (TX << 8)
#define CHECK_TOKENS (TX << 9)
#define TX_PACKETS (TX << 10)
#define TIMER (TX << 11)
-// Qos.c
+/* Qos.c */
#define QOS TX
#define QUEUE_INDEX (QOS << 12)
#define IPV4_DBG (QOS << 13)
#define PRUNE_QUEUE (QOS << 15)
#define SEND_QUEUE (QOS << 16)
-//TX_Misc
+/* TX_Misc */
#define TX_OSAL_DBG (TX << 17)
-//--SUBTYPEs for ------INIT & EXIT---------------------
-/*------------ TYPE is DBG_TYPE_INITEXIT -----//
-DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c */
+/* --SUBTYPEs for ------INIT & EXIT---------------------
+ * ------------ TYPE is DBG_TYPE_INITEXIT -----//
+ * DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c
+ */
#define MP 1
#define DRV_ENTRY (MP << 0)
#define MP_INIT (MP << 1)
#define INIT_DISP (MP << 6)
#define RX_INIT (MP << 7)
-//-SUBTYPEs for --RX----------------------------------
-//------------RX : TYPE is DBG_TYPE_RX -----//
-// Receive.c
+/* -SUBTYPEs for --RX----------------------------------
+ * ------------RX : TYPE is DBG_TYPE_RX -----//
+ * Receive.c
+ */
#define RX 1
#define RX_DPC (RX << 0)
#define RX_CTRL (RX << 3)
#define MP_RETURN (RX << 1)
#define LINK_MSG (RX << 2)
-//-SUBTYPEs for ----OTHER ROUTINES------------------
-//------------OTHERS : TYPE is DBG_TYPE_OTHER -----//
-// HaltnReset,CheckForHang,PnP,Misc,CmHost
-// total 12 macros
+/* -SUBTYPEs for ----OTHER ROUTINES------------------
+ * ------------OTHERS : TYPE is DBG_TYPE_OTHER -----//
+ * HaltnReset,CheckForHang,PnP,Misc,CmHost
+ * total 12 macros
+ */
#define OTHERS 1
-// ??ISR.C
#define ISR OTHERS
#define MP_DPC (ISR << 0)
-// HaltnReset.c
+/* HaltnReset.c */
#define HALT OTHERS
#define MP_HALT (HALT << 1)
#define CHECK_HANG (HALT << 2)
#define MP_RESET (HALT << 3)
#define MP_SHUTDOWN (HALT << 4)
-// pnp.c
+/* pnp.c */
#define PNP OTHERS
#define MP_PNP (PNP << 5)
-// Misc.c
+/* Misc.c */
#define MISC OTHERS
#define DUMP_INFO (MISC << 6)
#define CLASSIFY (MISC << 7)
#define DUMP_CONTROL (MISC << 10)
#define LED_DUMP_INFO (MISC << 11)
-// CmHost.c
+/* CmHost.c */
#define CMHOST OTHERS
#define SERIAL (OTHERS << 12)
#define IDLE_MODE (OTHERS << 13)
#define WRM (OTHERS << 14)
#define RDM (OTHERS << 15)
-// TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ?
+/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */
#define PHS_SEND (OTHERS << 16)
#define PHS_RECEIVE (OTHERS << 17)
#define PHS_MODULE (OTHERS << 18)
#define HOST_MIBS (OTHERS << 28)
#define CONN_MSG (CMHOST << 29)
-/*-----------------END SUBTYPEs------------------------------------------*/
/* Debug level
* We have 8 debug levels, in (numerical) increasing order of verbosity.
#define BCM_SCREAM 2
#define BCM_ERR 1
/* Not meant for developer in debug prints.
- * To be used to disable all prints by setting the DBG_LVL_CURR to this value */
+ * To be used to disable all prints by setting the DBG_LVL_CURR to this value
+ */
#define BCM_NONE 0
/* The current driver logging level.
* Everything at this level and (numerically) lower (meaning higher prio)
* is logged.
-* Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired.
+ * Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired.
* For eg. to set the logging level to 'errors only' use:
* #define DBG_LVL_CURR (BCM_ERR)
*/
#define DBG_LVL_CURR (BCM_ALL)
#define DBG_LVL_ALL BCM_ALL
-/*---Userspace mapping of Debug State.
+/* ---Userspace mapping of Debug State.
* Delibrately matches that of the Windows driver..
* The TestApp's ioctl passes this struct to us.
*/
{
unsigned int Subtype, Type;
unsigned int OnOff;
-// unsigned int debug_level; /* future expansion */
+/* unsigned int debug_level; future expansion */
} __attribute__((packed)) USER_BCM_DBG_STATE;
-//---Kernel-space mapping of Debug State
+/* ---Kernel-space mapping of Debug State */
typedef struct _S_BCM_DEBUG_STATE {
UINT type;
/* A bitmap of 32 bits for Subtype per Type.
UINT subtype[(NUMTYPES*2)+1];
UINT debug_level;
} S_BCM_DEBUG_STATE;
-/* Instantiated in the Adapter structure */
-/* We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not
- * we want the function's name printed. */
+/* Instantiated in the Adapter structure
+ * We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not
+ * we want the function's name printed.
+ */
#define DBG_NO_FUNC_PRINT 1 << 31
#define DBG_LVL_BITMASK 0xFF
-//--- Only for direct printk's; "hidden" to API.
+/* --- Only for direct printk's; "hidden" to API. */
#define DBG_TYPE_PRINTK 3
#define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \
for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \
if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \
/* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
- Adapter->stDebugState.subtype[i] = 0xffffffff; */ \
+ * Adapter->stDebugState.subtype[i] = 0xffffffff; \
+ */ \
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \
i, Adapter->stDebugState.subtype[i]); \
} \
projects / openwrt / staging / blogic.git / commitdiff