--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz3390", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 3390";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+
+ led-dsl = &led_dsl;
+ led-internet = &led_info;
+ led-wifi = &led_wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_POWER>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wifi: wifi {
+ label = "green:wifi";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ led_dsl: dsl {
+ label = "green:dsl";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+
+ led_lan {
+ label = "green:lan";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+
+ led_info: info {
+ label = "green:info";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB0_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB1_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ };
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+ };
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io32", "io44";
+ lantiq,pull = <0>;
+ lantiq,open-drain;
+ lantiq,output = <1>;
+ };
+
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain;
+ lantiq,output = <1>;
+ };
+ };
+
+ pcie-rst-dev {
+ gpio-hog;
+ line-name = "pcie-rst-dev";
+ gpios = <22 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+ };
+};
+
+&localbus {
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <1>;
+ reg = <1 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-mode = "on-die";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb0_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb1_vbus>;
+};
+
+&pcie0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ device_type = "pci";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+ };
+ };
+};
projects / openwrt / staging / zorun.git / commitdiff