Using a flag filed allows to encode more than one information into a variable.
Preparatory patch for the generic clocksource verification.
[mingo@elte.hu: convert vmitime.c to the new clocksource flag]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.mask = HPET_MASK,
.mult = 0, /* set below */
.shift = HPET_SHIFT,
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init init_hpet_clocksource(void)
.mult = 0, /* to be set */
.shift = 22,
.update_callback = tsc_update_callback,
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS |
+ CLOCK_SOURCE_MUST_VERIFY,
};
static int tsc_update_callback(void)
clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
clocksource_tsc.shift);
/* lower the rating if we already know its unstable: */
- if (check_tsc_unstable())
+ if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+ }
init_timer(&verify_tsc_freq_timer);
verify_tsc_freq_timer.function = verify_tsc_freq;
.mask = CLOCKSOURCE_MASK(64),
.mult = 0, /* to be set */
.shift = 22,
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
.mask = (cycle_t)ACPI_PM_MASK,
.mult = 0, /*to be caluclated*/
.shift = 22,
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+
};
.mask = CYCLONE_TIMER_MASK,
.mult = 10,
.shift = 0,
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init init_cyclone_clocksource(void)
.rating = 250,
.read = read_hrt,
.mask = CLOCKSOURCE_MASK(32),
- .is_continuous = 1,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
/* mult, shift are set based on mhz27 flag */
};
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @update_callback: called when safe to alter clocksource values
- * @is_continuous: defines if clocksource is free-running.
+ * @flags: flags describing special properties
* @cycle_interval: Used internally by timekeeping core, please ignore.
* @xtime_interval: Used internally by timekeeping core, please ignore.
*/
u32 mult;
u32 shift;
int (*update_callback)(void);
- int is_continuous;
+ unsigned long flags;
/* timekeeping specific data, ignore */
cycle_t cycle_last, cycle_interval;
s64 error;
};
+/*
+ * Clock source flags bits::
+ */
+#define CLOCK_SOURCE_IS_CONTINUOUS 0x01
+#define CLOCK_SOURCE_MUST_VERIFY 0x02
+
/* simplify initialization of mask field */
#define CLOCKSOURCE_MASK(bits) (cycle_t)(bits<64 ? ((1ULL<<bits)-1) : -1)
.mask = 0xffffffff, /*32bits*/
.mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
.shift = JIFFIES_SHIFT,
- .is_continuous = 0, /* tick based, not free running */
};
static int __init init_jiffies_clocksource(void)
do {
seq = read_seqbegin(&xtime_lock);
- ret = clock->is_continuous;
+ ret = clock->flags & CLOCK_SOURCE_IS_CONTINUOUS;
} while (read_seqretry(&xtime_lock, seq));