* Tilman Schmidt <tilman@imap.cc>,
* Stefan Eilers.
*
- * Based on usb-gigaset.c.
- *
* =====================================================================
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
#define GIGASET_DEVFSNAME "gig/bas/"
#define GIGASET_DEVNAME "ttyGB"
-#define IF_WRITEBUF 256 //FIXME
+/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+#define IF_WRITEBUF 264
/* Values for the Gigaset 307x */
#define USB_GIGA_VENDOR_ID 0x0681
-#define USB_GIGA_PRODUCT_ID 0x0001
-#define USB_4175_PRODUCT_ID 0x0002
+#define USB_3070_PRODUCT_ID 0x0001
+#define USB_3075_PRODUCT_ID 0x0002
#define USB_SX303_PRODUCT_ID 0x0021
#define USB_SX353_PRODUCT_ID 0x0022
/* table of devices that work with this driver */
static struct usb_device_id gigaset_table [] = {
- { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) },
- { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) },
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
+ { USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
{ } /* Terminating entry */
/* Function will be called if the device is unplugged */
static void gigaset_disconnect(struct usb_interface *interface);
+static void read_ctrl_callback(struct urb *, struct pt_regs *);
+static void stopurbs(struct bas_bc_state *);
+static int atwrite_submit(struct cardstate *, unsigned char *, int);
+static int start_cbsend(struct cardstate *);
/*==============================================================================*/
};
/* status of direct USB connection to 307x base (bits in basstate) */
-#define BS_ATOPEN 0x001
-#define BS_B1OPEN 0x002
-#define BS_B2OPEN 0x004
-#define BS_ATREADY 0x008
-#define BS_INIT 0x010
-#define BS_ATTIMER 0x020
+#define BS_ATOPEN 0x001 /* AT channel open */
+#define BS_B1OPEN 0x002 /* B channel 1 open */
+#define BS_B2OPEN 0x004 /* B channel 2 open */
+#define BS_ATREADY 0x008 /* base ready for AT command */
+#define BS_INIT 0x010 /* base has signalled INIT_OK */
+#define BS_ATTIMER 0x020 /* waiting for HD_READY_SEND_ATDATA */
+#define BS_ATRDPEND 0x040 /* urb_cmd_in in use */
+#define BS_ATWRPEND 0x080 /* urb_cmd_out in use */
static struct gigaset_driver *driver = NULL;
.id_table = gigaset_table,
};
+/* get message text for usb_submit_urb return code
+ */
+static char *get_usb_rcmsg(int rc)
+{
+ static char unkmsg[28];
+
+ switch (rc) {
+ case 0:
+ return "success";
+ case -ENOMEM:
+ return "out of memory";
+ case -ENODEV:
+ return "device not present";
+ case -ENOENT:
+ return "endpoint not present";
+ case -ENXIO:
+ return "URB type not supported";
+ case -EINVAL:
+ return "invalid argument";
+ case -EAGAIN:
+ return "start frame too early or too much scheduled";
+ case -EFBIG:
+ return "too many isochronous frames requested";
+ case -EPIPE:
+ return "endpoint stalled";
+ case -EMSGSIZE:
+ return "invalid packet size";
+ case -ENOSPC:
+ return "would overcommit USB bandwidth";
+ case -ESHUTDOWN:
+ return "device shut down";
+ case -EPERM:
+ return "reject flag set";
+ case -EHOSTUNREACH:
+ return "device suspended";
+ default:
+ snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
+ return unkmsg;
+ }
+}
+
/* get message text for USB status code
*/
static char *get_usb_statmsg(int status)
case 0:
return "success";
case -ENOENT:
- return "canceled";
- case -ECONNRESET:
- return "canceled (async)";
+ return "unlinked (sync)";
case -EINPROGRESS:
return "pending";
case -EPROTO:
- return "bit stuffing or unknown USB error";
+ return "bit stuffing error, timeout, or unknown USB error";
case -EILSEQ:
- return "Illegal byte sequence (CRC mismatch)";
- case -EPIPE:
- return "babble detect or endpoint stalled";
- case -ENOSR:
- return "buffer error";
+ return "CRC mismatch, timeout, or unknown USB error";
case -ETIMEDOUT:
return "timed out";
- case -ENODEV:
- return "device not present";
+ case -EPIPE:
+ return "endpoint stalled";
+ case -ECOMM:
+ return "IN buffer overrun";
+ case -ENOSR:
+ return "OUT buffer underrun";
+ case -EOVERFLOW:
+ return "too much data";
case -EREMOTEIO:
return "short packet detected";
+ case -ENODEV:
+ return "device removed";
case -EXDEV:
return "partial isochronous transfer";
case -EINVAL:
return "invalid argument";
- case -ENXIO:
- return "URB already queued";
- case -EAGAIN:
- return "isochronous start frame too early or too much scheduled";
- case -EFBIG:
- return "too many isochronous frames requested";
- case -EMSGSIZE:
- return "endpoint message size zero";
+ case -ECONNRESET:
+ return "unlinked (async)";
case -ESHUTDOWN:
- return "endpoint shutdown";
- case -EBUSY:
- return "another request pending";
+ return "device shut down";
default:
- snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status);
+ snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
return unkmsg;
}
}
gig_dbg(DEBUG_ANY, "%s: scheduling HUP for channel %d",
__func__, bcs->channel);
- if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
- //FIXME what should we do?
- return;
- }
+ if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL))
+ dev_err(cs->dev, "event queue full\n");
gigaset_schedule_event(cs);
}
/* error_reset
* reset Gigaset device because of an unrecoverable error
- * This function may be called from any context and takes care of scheduling
- * the necessary actions for execution outside of interrupt context.
+ * This function may be called from any context, and should take care of
+ * scheduling the necessary actions for execution outside of interrupt context.
+ * Right now, it just generates a kernel message calling for help.
* argument:
* controller state structure
*/
{
struct cardstate *cs = (struct cardstate *) data;
struct bas_cardstate *ucs = cs->hw.bas;
- unsigned long flags;
- spin_lock_irqsave(&cs->lock, flags);
- if (unlikely(!cs->connected)) {
- gig_dbg(DEBUG_USBREQ, "%s: disconnected", __func__);
- spin_unlock_irqrestore(&cs->lock, flags);
- return;
- }
if (!ucs->rcvbuf_size) {
gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
- spin_unlock_irqrestore(&cs->lock, flags);
return;
}
- spin_unlock_irqrestore(&cs->lock, flags);
dev_err(cs->dev, "timeout reading AT response\n");
error_reset(cs); //FIXME retry?
}
+/* set/clear bits in base connection state, return previous state
+ */
+inline static int update_basstate(struct bas_cardstate *ucs,
+ int set, int clear)
+{
+ unsigned long flags;
+ int state;
-static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs);
+ spin_lock_irqsave(&ucs->lock, flags);
+ state = atomic_read(&ucs->basstate);
+ atomic_set(&ucs->basstate, (state & ~clear) | set);
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ return state;
+}
/* atread_submit
- * submit an HD_READ_ATMESSAGE command URB
+ * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
* parameters:
* cs controller state structure
* timeout timeout in 1/10 sec., 0: none
* return value:
* 0 on success
- * -EINVAL if a NULL pointer is encountered somewhere
* -EBUSY if another request is pending
* any URB submission error code
*/
gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
ucs->rcvbuf_size);
- if (ucs->urb_cmd_in->status == -EINPROGRESS) {
+ if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) {
dev_err(cs->dev,
"could not submit HD_READ_ATMESSAGE: URB busy\n");
return -EBUSY;
read_ctrl_callback, cs->inbuf);
if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) {
+ update_basstate(ucs, 0, BS_ATRDPEND);
dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
get_usb_statmsg(ret));
return ret;
return 0;
}
-static void stopurbs(struct bas_bc_state *);
-static int start_cbsend(struct cardstate *);
-
-/* set/clear bits in base connection state
- */
-inline static void update_basstate(struct bas_cardstate *ucs,
- int set, int clear)
-{
- unsigned long flags;
- int state;
-
- spin_lock_irqsave(&ucs->lock, flags);
- state = atomic_read(&ucs->basstate);
- state &= ~clear;
- state |= set;
- atomic_set(&ucs->basstate, state);
- spin_unlock_irqrestore(&ucs->lock, flags);
-}
-
-
/* read_int_callback
* USB completion handler for interrupt pipe input
* called by the USB subsystem in interrupt context
struct bas_cardstate *ucs = cs->hw.bas;
struct bc_state *bcs;
unsigned long flags;
- int status;
+ int rc;
unsigned l;
int channel;
switch (urb->status) {
case 0: /* success */
break;
- case -ENOENT: /* canceled */
- case -ECONNRESET: /* canceled (async) */
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET: /* cancelled (async) */
case -EINPROGRESS: /* pending */
/* ignore silently */
gig_dbg(DEBUG_USBREQ, "%s: %s",
__func__, get_usb_statmsg(urb->status));
return;
+ case -ENODEV: /* device removed */
+ case -ESHUTDOWN: /* device shut down */
+ //FIXME use this as disconnect indicator?
+ gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
+ return;
default: /* severe trouble */
dev_warn(cs->dev, "interrupt read: %s\n",
get_usb_statmsg(urb->status));
goto resubmit;
}
+ /* drop incomplete packets even if the missing bytes wouldn't matter */
+ if (unlikely(urb->actual_length < 3)) {
+ dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
+ urb->actual_length);
+ goto resubmit;
+ }
+
l = (unsigned) ucs->int_in_buf[1] +
(((unsigned) ucs->int_in_buf[2]) << 8);
}
spin_lock_irqsave(&cs->lock, flags);
if (ucs->rcvbuf_size) {
- spin_unlock_irqrestore(&cs->lock, flags);
+ /* throw away previous buffer - we have no queue */
dev_err(cs->dev,
- "receive AT data overrun, %d bytes lost\n", l);
- error_reset(cs); //FIXME reschedule
- break;
+ "receive AT data overrun, %d bytes lost\n",
+ ucs->rcvbuf_size);
+ kfree(ucs->rcvbuf);
+ ucs->rcvbuf_size = 0;
}
if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
spin_unlock_irqrestore(&cs->lock, flags);
- dev_err(cs->dev, "out of memory, %d bytes lost\n", l);
- error_reset(cs); //FIXME reschedule
+ dev_err(cs->dev, "out of memory receiving AT data\n");
+ error_reset(cs);
break;
}
ucs->rcvbuf_size = l;
ucs->retry_cmd_in = 0;
- if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+ if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
kfree(ucs->rcvbuf);
ucs->rcvbuf = NULL;
ucs->rcvbuf_size = 0;
- error_reset(cs); //FIXME reschedule
+ if (rc != -ENODEV)
+ //FIXME corrective action?
+ error_reset(cs);
}
spin_unlock_irqrestore(&cs->lock, flags);
break;
check_pending(ucs);
resubmit:
- spin_lock_irqsave(&cs->lock, flags);
- status = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
- spin_unlock_irqrestore(&cs->lock, flags);
- if (unlikely(status)) {
+ rc = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (unlikely(rc != 0 && rc != -ENODEV)) {
dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
- get_usb_statmsg(status));
+ get_usb_rcmsg(rc));
error_reset(cs);
}
}
struct bas_cardstate *ucs = cs->hw.bas;
int have_data = 0;
unsigned numbytes;
- unsigned long flags;
+ int rc;
- spin_lock_irqsave(&cs->lock, flags);
- if (unlikely(!cs->connected)) {
- warn("%s: disconnected", __func__);
- spin_unlock_irqrestore(&cs->lock, flags);
- return;
- }
+ update_basstate(ucs, 0, BS_ATRDPEND);
if (!ucs->rcvbuf_size) {
dev_warn(cs->dev, "%s: no receive in progress\n", __func__);
- spin_unlock_irqrestore(&cs->lock, flags);
return;
}
}
break;
- case -ENOENT: /* canceled */
- case -ECONNRESET: /* canceled (async) */
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET: /* cancelled (async) */
case -EINPROGRESS: /* pending */
+ case -ENODEV: /* device removed */
+ case -ESHUTDOWN: /* device shut down */
/* no action necessary */
gig_dbg(DEBUG_USBREQ, "%s: %s",
__func__, get_usb_statmsg(urb->status));
if (ucs->retry_cmd_in++ < BAS_RETRY) {
dev_notice(cs->dev, "control read: retry %d\n",
ucs->retry_cmd_in);
- if (atread_submit(cs, BAS_TIMEOUT) >= 0) {
- /* resubmitted - bypass regular exit block */
- spin_unlock_irqrestore(&cs->lock, flags);
+ rc = atread_submit(cs, BAS_TIMEOUT);
+ if (rc >= 0 || rc == -ENODEV)
+ /* resubmitted or disconnected */
+ /* - bypass regular exit block */
return;
- }
} else {
dev_err(cs->dev,
"control read: giving up after %d tries\n",
kfree(ucs->rcvbuf);
ucs->rcvbuf = NULL;
ucs->rcvbuf_size = 0;
- spin_unlock_irqrestore(&cs->lock, flags);
if (have_data) {
gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
gigaset_schedule_event(cs);
int i, rc;
/* status codes not worth bothering the tasklet with */
- if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
- urb->status == -EINPROGRESS)) {
+ if (unlikely(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -EINPROGRESS ||
+ urb->status == -ENODEV ||
+ urb->status == -ESHUTDOWN)) {
gig_dbg(DEBUG_ISO, "%s: %s",
__func__, get_usb_statmsg(urb->status));
return;
for (i = 0; i < BAS_NUMFRAMES; i++) {
ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
if (unlikely(urb->iso_frame_desc[i].status != 0 &&
- urb->iso_frame_desc[i].status != -EINPROGRESS)) {
+ urb->iso_frame_desc[i].status !=
+ -EINPROGRESS))
ubc->loststatus = urb->iso_frame_desc[i].status;
- }
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
gig_dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit",
__func__);
rc = usb_submit_urb(urb, SLAB_ATOMIC);
- if (unlikely(rc != 0)) {
+ if (unlikely(rc != 0 && rc != -ENODEV)) {
dev_err(bcs->cs->dev,
"could not resubmit isochronous read "
- "URB: %s\n", get_usb_statmsg(rc));
+ "URB: %s\n", get_usb_rcmsg(rc));
dump_urb(DEBUG_ISO, "isoc read", urb);
error_hangup(bcs);
}
unsigned long flags;
/* status codes not worth bothering the tasklet with */
- if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
- urb->status == -EINPROGRESS)) {
+ if (unlikely(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -EINPROGRESS ||
+ urb->status == -ENODEV ||
+ urb->status == -ESHUTDOWN)) {
gig_dbg(DEBUG_ISO, "%s: %s",
__func__, get_usb_statmsg(urb->status));
return;
for (k = 0; k < BAS_INURBS; k++) {
urb = ubc->isoinurbs[k];
if (!urb) {
- dev_err(bcs->cs->dev, "isoinurbs[%d]==NULL\n", k);
rc = -EFAULT;
goto error;
}
}
dump_urb(DEBUG_ISO, "Initial isoc read", urb);
- if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
- dev_err(bcs->cs->dev,
- "could not submit isochronous read URB %d: %s\n",
- k, get_usb_statmsg(rc));
+ if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0)
goto error;
- }
}
/* initialize L2 transmission */
for (k = 0; k < BAS_OUTURBS; ++k) {
urb = ubc->isoouturbs[k].urb;
if (!urb) {
- dev_err(bcs->cs->dev, "isoouturbs[%d].urb==NULL\n", k);
rc = -EFAULT;
goto error;
}
for (k = 0; k < 2; ++k) {
dump_urb(DEBUG_ISO, "Initial isoc write", urb);
rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC);
- if (rc != 0) {
- dev_err(bcs->cs->dev,
- "could not submit isochronous write URB %d: %s\n",
- k, get_usb_statmsg(rc));
+ if (rc != 0)
goto error;
- }
}
dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
ubc->isooutfree = &ubc->isoouturbs[2];
for (k = 0; k < BAS_INURBS; ++k) {
rc = usb_unlink_urb(ubc->isoinurbs[k]);
gig_dbg(DEBUG_ISO,
- "%s: isoc input URB %d unlinked, result = %d",
- __func__, k, rc);
+ "%s: isoc input URB %d unlinked, result = %s",
+ __func__, k, get_usb_rcmsg(rc));
}
for (k = 0; k < BAS_OUTURBS; ++k) {
rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
gig_dbg(DEBUG_ISO,
- "%s: isoc output URB %d unlinked, result = %d",
- __func__, k, rc);
+ "%s: isoc output URB %d unlinked, result = %s",
+ __func__, k, get_usb_rcmsg(rc));
}
}
/* submit_iso_write_urb
* fill and submit the next isochronous write URB
* parameters:
- * bcs B channel state structure
+ * ucx context structure containing URB
* return value:
* number of frames submitted in URB
* 0 if URB not submitted because no data available (isooutbuf busy)
struct bas_bc_state *ubc = ucx->bcs->hw.bas;
struct usb_iso_packet_descriptor *ifd;
int corrbytes, nframe, rc;
- unsigned long flags;
/* urb->dev is clobbered by USB subsystem */
urb->dev = ucx->bcs->cs->hw.bas->udev;
ifd->status = 0;
ifd->actual_length = 0;
}
- if ((urb->number_of_packets = nframe) > 0) {
- spin_lock_irqsave(&ucx->bcs->cs->lock, flags);
- rc = ucx->bcs->cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
- spin_unlock_irqrestore(&ucx->bcs->cs->lock, flags);
+ if (unlikely(nframe == 0))
+ return 0; /* no data to send */
+ urb->number_of_packets = nframe;
- if (rc) {
+ rc = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (unlikely(rc)) {
+ if (rc == -ENODEV)
+ /* device removed - give up silently */
+ gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
+ else
dev_err(ucx->bcs->cs->dev,
"could not submit isochronous write URB: %s\n",
- get_usb_statmsg(rc));
- dump_urb(DEBUG_ISO, "isoc write", urb);
- return rc;
- }
- ++ubc->numsub;
+ get_usb_rcmsg(rc));
+ return rc;
}
+ ++ubc->numsub;
return nframe;
}
int i;
struct sk_buff *skb;
int len;
+ int rc;
/* loop while completed URBs arrive in time */
for (;;) {
ubc->isooutfree = NULL;
spin_unlock_irqrestore(&ubc->isooutlock, flags);
if (next) {
- if (submit_iso_write_urb(next) <= 0) {
+ rc = submit_iso_write_urb(next);
+ if (unlikely(rc <= 0 && rc != -ENODEV)) {
/* could not submit URB, put it back */
spin_lock_irqsave(&ubc->isooutlock, flags);
if (ubc->isooutfree == NULL) {
/* process completed URB */
urb = done->urb;
switch (urb->status) {
+ case -EXDEV: /* partial completion */
+ gig_dbg(DEBUG_ISO, "%s: URB partially completed",
+ __func__);
+ /* fall through - what's the difference anyway? */
case 0: /* normal completion */
- break;
- case -EXDEV: /* inspect individual frames */
- /* assumptions (for lack of documentation):
- * - actual_length bytes of the frame in error are
+ /* inspect individual frames
+ * assumptions (for lack of documentation):
+ * - actual_length bytes of first frame in error are
* successfully sent
* - all following frames are not sent at all
*/
- gig_dbg(DEBUG_ISO, "%s: URB partially completed",
- __func__);
- offset = done->limit; /* just in case */
+ offset = done->limit; /* default (no error) */
for (i = 0; i < BAS_NUMFRAMES; i++) {
ifd = &urb->iso_frame_desc[i];
if (ifd->status ||
}
#endif
break;
- case -EPIPE: //FIXME is this the code for "underrun"?
+ case -EPIPE: /* stall - probably underrun */
dev_err(cs->dev, "isochronous write stalled\n");
error_hangup(bcs);
break;
spin_unlock_irqrestore(&ubc->isooutlock, flags);
if (next) {
/* only one URB still active - resubmit one */
- if (submit_iso_write_urb(next) <= 0) {
+ rc = submit_iso_write_urb(next);
+ if (unlikely(rc <= 0 && rc != -ENODEV)) {
/* couldn't submit */
error_hangup(bcs);
}
break;
case -ENOENT:
case -ECONNRESET:
- gig_dbg(DEBUG_ISO, "%s: URB canceled", __func__);
- continue; /* -> skip */
- case -EINPROGRESS: /* huh? */
- gig_dbg(DEBUG_ISO, "%s: URB still pending", __func__);
+ case -EINPROGRESS:
+ gig_dbg(DEBUG_ISO, "%s: %s",
+ __func__, get_usb_statmsg(urb->status));
continue; /* -> skip */
case -EPIPE:
dev_err(cs->dev, "isochronous read stalled\n");
urb->dev = bcs->cs->hw.bas->udev;
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = BAS_NUMFRAMES;
- spin_lock_irqsave(&cs->lock, flags);
- rc = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
- spin_unlock_irqrestore(&cs->lock, flags);
- if (rc) {
+ rc = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (unlikely(rc != 0 && rc != -ENODEV)) {
dev_err(cs->dev,
"could not resubmit isochronous read URB: %s\n",
- get_usb_statmsg(rc));
+ get_usb_rcmsg(rc));
dump_urb(DEBUG_ISO, "resubmit iso read", urb);
error_hangup(bcs);
}
* timeout timeout in seconds (0: no timeout)
* return value:
* 0 on success
- * -EINVAL if a NULL pointer is encountered somewhere
* -EBUSY if another request is pending
* any URB submission error code
*/
req, ucs->pending);
return -EBUSY;
}
- if (ucs->urb_ctrl->status == -EINPROGRESS) {
- spin_unlock_irqrestore(&ucs->lock, flags);
- dev_err(bcs->cs->dev,
- "could not submit request 0x%02x: URB busy\n", req);
- return -EBUSY;
- }
ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
ucs->dr_ctrl.bRequest = req;
static int gigaset_init_bchannel(struct bc_state *bcs)
{
int req, ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcs->cs->lock, flags);
+ if (unlikely(!bcs->cs->connected)) {
+ gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
+ return -ENODEV;
+ }
if ((ret = starturbs(bcs)) < 0) {
dev_err(bcs->cs->dev,
- "could not start isochronous I/O for channel %d\n",
- bcs->channel + 1);
- error_hangup(bcs);
+ "could not start isochronous I/O for channel B%d: %s\n",
+ bcs->channel + 1,
+ ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
+ if (ret != -ENODEV)
+ error_hangup(bcs);
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
return ret;
}
req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
- dev_err(bcs->cs->dev, "could not open channel %d: %s\n",
- bcs->channel + 1, get_usb_statmsg(ret));
+ dev_err(bcs->cs->dev, "could not open channel B%d\n",
+ bcs->channel + 1);
stopurbs(bcs->hw.bas);
- error_hangup(bcs);
+ if (ret != -ENODEV)
+ error_hangup(bcs);
}
+
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
return ret;
}
static int gigaset_close_bchannel(struct bc_state *bcs)
{
int req, ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcs->cs->lock, flags);
+ if (unlikely(!bcs->cs->connected)) {
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
+ gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+ return -ENODEV;
+ }
if (!(atomic_read(&bcs->cs->hw.bas->basstate) &
(bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
/* channel not running: just signal common.c */
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
gigaset_bchannel_down(bcs);
return 0;
}
+ /* channel running: tell device to close it */
req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
- dev_err(bcs->cs->dev,
- "could not submit HD_CLOSE_BxCHANNEL request: %s\n",
- get_usb_statmsg(ret));
+ dev_err(bcs->cs->dev, "closing channel B%d failed\n",
+ bcs->channel + 1);
+
+ spin_unlock_irqrestore(&bcs->cs->lock, flags);
return ret;
}
kfree(cb);
}
-static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len);
-
/* write_command_callback
* USB completion handler for AT command transmission
* called by the USB subsystem in interrupt context
struct bas_cardstate *ucs = cs->hw.bas;
unsigned long flags;
+ update_basstate(ucs, 0, BS_ATWRPEND);
+
/* check status */
switch (urb->status) {
case 0: /* normal completion */
break;
- case -ENOENT: /* canceled */
- case -ECONNRESET: /* canceled (async) */
+ case -ENOENT: /* cancelled */
+ case -ECONNRESET: /* cancelled (async) */
case -EINPROGRESS: /* pending */
+ case -ENODEV: /* device removed */
+ case -ESHUTDOWN: /* device shut down */
/* ignore silently */
gig_dbg(DEBUG_USBREQ, "%s: %s",
__func__, get_usb_statmsg(urb->status));
* len length of command to send
* return value:
* 0 on success
- * -EFAULT if a NULL pointer is encountered somewhere
* -EBUSY if another request is pending
* any URB submission error code
*/
static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
{
struct bas_cardstate *ucs = cs->hw.bas;
- unsigned long flags;
- int ret;
+ int rc;
gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
- if (ucs->urb_cmd_out->status == -EINPROGRESS) {
+ if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
dev_err(cs->dev,
"could not submit HD_WRITE_ATMESSAGE: URB busy\n");
return -EBUSY;
usb_sndctrlpipe(ucs->udev, 0),
(unsigned char*) &ucs->dr_cmd_out, buf, len,
write_command_callback, cs);
-
- spin_lock_irqsave(&cs->lock, flags);
- ret = cs->connected ? usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC) : -ENODEV;
- spin_unlock_irqrestore(&cs->lock, flags);
-
- if (ret) {
+ rc = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC);
+ if (unlikely(rc)) {
+ update_basstate(ucs, 0, BS_ATWRPEND);
dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
- get_usb_statmsg(ret));
- return ret;
+ get_usb_rcmsg(rc));
+ return rc;
}
- /* submitted successfully */
- update_basstate(ucs, 0, BS_ATREADY);
-
- /* start timeout if necessary */
- if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) {
+ /* submitted successfully, start timeout if necessary */
+ if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
ATRDY_TIMEOUT);
ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10;
ucs->timer_atrdy.data = (unsigned long) cs;
ucs->timer_atrdy.function = atrdy_timeout;
add_timer(&ucs->timer_atrdy);
- update_basstate(ucs, BS_ATTIMER, 0);
}
return 0;
}
gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open");
rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
if (rc < 0) {
- dev_err(cs->dev, "could not open AT channel\n");
/* flush command queue */
spin_lock_irqsave(&cs->cmdlock, flags);
while (cs->cmdbuf != NULL)
cs->lastcmdbuf = cb;
spin_unlock_irqrestore(&cs->cmdlock, flags);
+ spin_lock_irqsave(&cs->lock, flags);
+ if (unlikely(!cs->connected)) {
+ spin_unlock_irqrestore(&cs->lock, flags);
+ gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+ return -ENODEV;
+ }
status = start_cbsend(cs);
-
+ spin_unlock_irqrestore(&cs->lock, flags);
return status < 0 ? status : len;
}
*/
static int gigaset_freebcshw(struct bc_state *bcs)
{
- if (!bcs->hw.bas)
+ struct bas_bc_state *ubc = bcs->hw.bas;
+ int i;
+
+ if (!ubc)
return 0;
- if (bcs->hw.bas->isooutbuf)
- kfree(bcs->hw.bas->isooutbuf);
- kfree(bcs->hw.bas);
+ /* kill URBs and tasklets before freeing - better safe than sorry */
+ atomic_set(&ubc->running, 0);
+ for (i = 0; i < BAS_OUTURBS; ++i)
+ if (ubc->isoouturbs[i].urb) {
+ gig_dbg(DEBUG_INIT, "%s: killing iso out URB %d",
+ __func__, i);
+ usb_kill_urb(ubc->isoouturbs[i].urb);
+ usb_free_urb(ubc->isoouturbs[i].urb);
+ }
+ for (i = 0; i < BAS_INURBS; ++i)
+ if (ubc->isoinurbs[i]) {
+ gig_dbg(DEBUG_INIT, "%s: killing iso in URB %d",
+ __func__, i);
+ usb_kill_urb(ubc->isoinurbs[i]);
+ usb_free_urb(ubc->isoinurbs[i]);
+ }
+ tasklet_kill(&ubc->sent_tasklet);
+ tasklet_kill(&ubc->rcvd_tasklet);
+ kfree(ubc->isooutbuf);
+ kfree(ubc);
bcs->hw.bas = NULL;
return 1;
}
static void gigaset_freecshw(struct cardstate *cs)
{
- struct bas_cardstate *ucs = cs->hw.bas;
-
- del_timer(&ucs->timer_ctrl);
- del_timer(&ucs->timer_atrdy);
- del_timer(&ucs->timer_cmd_in);
-
+ /* timers, URBs and rcvbuf are disposed of in disconnect */
kfree(cs->hw.bas);
+ cs->hw.bas = NULL;
}
static int gigaset_initcshw(struct cardstate *cs)
struct bas_bc_state *ubc;
struct usb_endpoint_descriptor *endpoint;
int i, j;
- int ret;
+ int rc;
gig_dbg(DEBUG_ANY,
"%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
__func__, le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
- /* See if the device offered us matches what we can accept */
- if ((le16_to_cpu(udev->descriptor.idVendor) != USB_GIGA_VENDOR_ID) ||
- (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID &&
- le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID &&
- le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID &&
- le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) {
- gig_dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__);
- return -ENODEV;
- }
-
/* set required alternate setting */
hostif = interface->cur_altsetting;
if (hostif->desc.bAlternateSetting != 3) {
* - three for the different uses of the default control pipe
* - three for each isochronous pipe
*/
- ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL);
- if (!ucs->urb_int_in) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
- ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL);
- if (!ucs->urb_cmd_in) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
- ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL);
- if (!ucs->urb_cmd_out) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
- ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL);
- if (!ucs->urb_ctrl) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
+ if (!(ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+ !(ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+ !(ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL)) ||
+ !(ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL)))
+ goto allocerr;
for (j = 0; j < 2; ++j) {
ubc = cs->bcs[j].hw.bas;
- for (i = 0; i < BAS_OUTURBS; ++i) {
- ubc->isoouturbs[i].urb =
- usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
- if (!ubc->isoouturbs[i].urb) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
- }
- for (i = 0; i < BAS_INURBS; ++i) {
- ubc->isoinurbs[i] =
- usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
- if (!ubc->isoinurbs[i]) {
- dev_err(cs->dev, "no free urbs available\n");
- goto error;
- }
- }
+ for (i = 0; i < BAS_OUTURBS; ++i)
+ if (!(ubc->isoouturbs[i].urb =
+ usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+ goto allocerr;
+ for (i = 0; i < BAS_INURBS; ++i)
+ if (!(ubc->isoinurbs[i] =
+ usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+ goto allocerr;
}
ucs->rcvbuf = NULL;
(endpoint->bEndpointAddress) & 0x0f),
ucs->int_in_buf, 3, read_int_callback, cs,
endpoint->bInterval);
- ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL);
- if (ret) {
+ if ((rc = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL)) != 0) {
dev_err(cs->dev, "could not submit interrupt URB: %s\n",
- get_usb_statmsg(ret));
+ get_usb_rcmsg(rc));
goto error;
}
/* tell the device that the driver is ready */
- if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+ if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
goto error;
/* tell common part that the device is ready */
return 0;
+allocerr:
+ dev_err(cs->dev, "could not allocate URBs\n");
error:
freeurbs(cs);
usb_set_intfdata(interface, NULL);
{
struct cardstate *cs;
struct bas_cardstate *ucs;
+ int j;
cs = usb_get_intfdata(interface);
ucs = cs->hw.bas;
dev_info(cs->dev, "disconnecting Gigaset base\n");
+
+ /* mark base as not ready, all channels disconnected */
+ atomic_set(&ucs->basstate, 0);
+
+ /* tell LL all channels are down */
+ //FIXME shouldn't gigaset_stop() do this?
+ for (j = 0; j < 2; ++j)
+ gigaset_bchannel_down(cs->bcs + j);
+
+ /* stop driver (common part) */
gigaset_stop(cs);
+
+ /* stop timers and URBs, free ressources */
+ del_timer_sync(&ucs->timer_ctrl);
+ del_timer_sync(&ucs->timer_atrdy);
+ del_timer_sync(&ucs->timer_cmd_in);
freeurbs(cs);
usb_set_intfdata(interface, NULL);
kfree(ucs->rcvbuf);
ucs->rcvbuf = NULL;
ucs->rcvbuf_size = 0;
- atomic_set(&ucs->basstate, 0);
usb_put_dev(ucs->udev);
ucs->interface = NULL;
ucs->udev = NULL;
*/
static void __exit bas_gigaset_exit(void)
{
+ struct bas_cardstate *ucs = cardstate->hw.bas;
+
gigaset_blockdriver(driver); /* => probe will fail
* => no gigaset_start any more
*/
gigaset_shutdown(cardstate);
/* from now on, no isdn callback should be possible */
- if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) {
- gig_dbg(DEBUG_ANY, "closing AT channel");
- if (req_submit(cardstate->bcs,
- HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) {
- /* successfully submitted */
- //FIXME wait for completion?
- }
+ /* close all still open channels */
+ if (atomic_read(&ucs->basstate) & BS_B1OPEN) {
+ gig_dbg(DEBUG_INIT, "closing B1 channel");
+ usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+ HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ, 0, 0,
+ NULL, 0, BAS_TIMEOUT);
+ }
+ if (atomic_read(&ucs->basstate) & BS_B2OPEN) {
+ gig_dbg(DEBUG_INIT, "closing B2 channel");
+ usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+ HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ, 0, 0,
+ NULL, 0, BAS_TIMEOUT);
+ }
+ if (atomic_read(&ucs->basstate) & BS_ATOPEN) {
+ gig_dbg(DEBUG_INIT, "closing AT channel");
+ usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+ HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ, 0, 0,
+ NULL, 0, BAS_TIMEOUT);
}
+ atomic_set(&ucs->basstate, 0);
/* deregister this driver with the USB subsystem */
usb_deregister(&gigaset_usb_driver);
projects / openwrt / staging / blogic.git / commitdiff