net: macb: Reorganize macb_mii bringup
authorBrad Mouring <brad.mouring@ni.com>
Tue, 13 Mar 2018 21:32:13 +0000 (16:32 -0500)
committerDavid S. Miller <davem@davemloft.net>
Fri, 16 Mar 2018 15:14:33 +0000 (11:14 -0400)
The macb mii setup (mii_probe() and mii_init()) previously was
somewhat interspersed, likely a result of organic growth and hacking.

This change moves mii bus registration into mii_init and probing the
bus for devices into mii_probe.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/cadence/macb_main.c

index e84afcf1ecb508a771cfe3f418e38f7340c5c1d3..4b514c705e57198e7f42107eb941bdc98672ceef 100644 (file)
@@ -472,8 +472,42 @@ static int macb_mii_probe(struct net_device *dev)
        struct macb *bp = netdev_priv(dev);
        struct macb_platform_data *pdata;
        struct phy_device *phydev;
-       int phy_irq;
-       int ret;
+       struct device_node *np;
+       int phy_irq, ret, i;
+
+       pdata = dev_get_platdata(&bp->pdev->dev);
+       np = bp->pdev->dev.of_node;
+       ret = 0;
+
+       if (np) {
+               if (of_phy_is_fixed_link(np)) {
+                       if (of_phy_register_fixed_link(np) < 0) {
+                               dev_err(&bp->pdev->dev,
+                                       "broken fixed-link specification\n");
+                               return -ENODEV;
+                       }
+                       bp->phy_node = of_node_get(np);
+               } else {
+                       /* fallback to standard phy registration if no phy were
+                        * found during dt phy registration
+                        */
+                       if (!phy_find_first(bp->mii_bus)) {
+                               for (i = 0; i < PHY_MAX_ADDR; i++) {
+                                       struct phy_device *phydev;
+
+                                       phydev = mdiobus_scan(bp->mii_bus, i);
+                                       if (IS_ERR(phydev) &&
+                                           PTR_ERR(phydev) != -ENODEV) {
+                                               ret = PTR_ERR(phydev);
+                                               break;
+                                       }
+                               }
+
+                               if (ret)
+                                       return -ENODEV;
+                       }
+               }
+       }
 
        if (bp->phy_node) {
                phydev = of_phy_connect(dev, bp->phy_node,
@@ -488,7 +522,6 @@ static int macb_mii_probe(struct net_device *dev)
                        return -ENXIO;
                }
 
-               pdata = dev_get_platdata(&bp->pdev->dev);
                if (pdata) {
                        if (gpio_is_valid(pdata->phy_irq_pin)) {
                                ret = devm_gpio_request(&bp->pdev->dev,
@@ -533,7 +566,7 @@ static int macb_mii_init(struct macb *bp)
 {
        struct macb_platform_data *pdata;
        struct device_node *np;
-       int err = -ENXIO, i;
+       int err, i;
 
        /* Enable management port */
        macb_writel(bp, NCR, MACB_BIT(MPE));
@@ -556,39 +589,9 @@ static int macb_mii_init(struct macb *bp)
        dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
 
        np = bp->pdev->dev.of_node;
-       if (np) {
-               if (of_phy_is_fixed_link(np)) {
-                       if (of_phy_register_fixed_link(np) < 0) {
-                               dev_err(&bp->pdev->dev,
-                                       "broken fixed-link specification\n");
-                               goto err_out_unregister_bus;
-                       }
-                       bp->phy_node = of_node_get(np);
-
-                       err = mdiobus_register(bp->mii_bus);
-               } else {
-                       /* try dt phy registration */
-                       err = of_mdiobus_register(bp->mii_bus, np);
-
-                       /* fallback to standard phy registration if no phy were
-                        * found during dt phy registration
-                        */
-                       if (!err && !phy_find_first(bp->mii_bus)) {
-                               for (i = 0; i < PHY_MAX_ADDR; i++) {
-                                       struct phy_device *phydev;
 
-                                       phydev = mdiobus_scan(bp->mii_bus, i);
-                                       if (IS_ERR(phydev) &&
-                                           PTR_ERR(phydev) != -ENODEV) {
-                                               err = PTR_ERR(phydev);
-                                               break;
-                                       }
-                               }
-
-                               if (err)
-                                       goto err_out_unregister_bus;
-                       }
-               }
+       if (np) {
+               err = of_mdiobus_register(bp->mii_bus, np);
        } else {
                for (i = 0; i < PHY_MAX_ADDR; i++)
                        bp->mii_bus->irq[i] = PHY_POLL;
@@ -610,10 +613,10 @@ static int macb_mii_init(struct macb *bp)
 
 err_out_unregister_bus:
        mdiobus_unregister(bp->mii_bus);
-err_out_free_mdiobus:
-       of_node_put(bp->phy_node);
        if (np && of_phy_is_fixed_link(np))
                of_phy_deregister_fixed_link(np);
+err_out_free_mdiobus:
+       of_node_put(bp->phy_node);
        mdiobus_free(bp->mii_bus);
 err_out:
        return err;