gpio: Add Cadence GPIO driver
authorJan Kotas <jank@cadence.com>
Tue, 18 Dec 2018 16:10:42 +0000 (16:10 +0000)
committerLinus Walleij <linus.walleij@linaro.org>
Fri, 21 Dec 2018 10:41:00 +0000 (11:41 +0100)
This patch adds a driver for Cadence GPIO controller.

It can be enabled with GPIO_CADENCE Kconfig option.
It uses generic GPIO infrastructure and works
as an interrupt controller.
At the moment it only supports level sensitive irqs.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/gpio/Kconfig
drivers/gpio/Makefile
drivers/gpio/gpio-cadence.c [new file with mode: 0644]

index f47994708809e511f6066b5d1ca1f6834199fe7e..7b3e4e19a7995645b28c388e95c2113e40d1fe82 100644 (file)
@@ -160,6 +160,14 @@ config GPIO_BRCMSTB
        help
          Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
 
+config GPIO_CADENCE
+       tristate "Cadence GPIO support"
+       depends on OF_GPIO
+       select GPIO_GENERIC
+       select GPIOLIB_IRQCHIP
+       help
+         Say yes here to enable support for Cadence GPIO controller.
+
 config GPIO_CLPS711X
        tristate "CLPS711X GPIO support"
        depends on ARCH_CLPS711X || COMPILE_TEST
index f18d34590722d46d2c3b4c2b8de937b540cf77a0..37628f8dbf7001db0689d0173afc8d033d0d90f4 100644 (file)
@@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD9571MWV)   += gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)     += gpio-brcmstb.o
 obj-$(CONFIG_GPIO_BT8XX)       += gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CADENCE)     += gpio-cadence.o
 obj-$(CONFIG_GPIO_CLPS711X)    += gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)      += gpio-cs5535.o
 obj-$(CONFIG_GPIO_CRYSTAL_COVE)        += gpio-crystalcove.o
diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c
new file mode 100644 (file)
index 0000000..aec8d5d
--- /dev/null
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2017-2018 Cadence
+ *
+ * Authors:
+ *  Jan Kotas <jank@cadence.com>
+ *  Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define CDNS_GPIO_BYPASS_MODE          0x00
+#define CDNS_GPIO_DIRECTION_MODE       0x04
+#define CDNS_GPIO_OUTPUT_EN            0x08
+#define CDNS_GPIO_OUTPUT_VALUE         0x0c
+#define CDNS_GPIO_INPUT_VALUE          0x10
+#define CDNS_GPIO_IRQ_MASK             0x14
+#define CDNS_GPIO_IRQ_EN               0x18
+#define CDNS_GPIO_IRQ_DIS              0x1c
+#define CDNS_GPIO_IRQ_STATUS           0x20
+#define CDNS_GPIO_IRQ_TYPE             0x24
+#define CDNS_GPIO_IRQ_VALUE            0x28
+#define CDNS_GPIO_IRQ_ANY_EDGE         0x2c
+
+struct cdns_gpio_chip {
+       struct gpio_chip gc;
+       struct clk *pclk;
+       void __iomem *regs;
+       u32 bypass_orig;
+};
+
+static int cdns_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+       iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) & ~BIT(offset),
+                 cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+       spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+       return 0;
+}
+
+static void cdns_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+       unsigned long flags;
+
+       spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+       iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) |
+                 (BIT(offset) & cgpio->bypass_orig),
+                 cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+       spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+}
+
+static void cdns_gpio_irq_mask(struct irq_data *d)
+{
+       struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+
+       iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_DIS);
+}
+
+static void cdns_gpio_irq_unmask(struct irq_data *d)
+{
+       struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+
+       iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_EN);
+}
+
+static int cdns_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+       struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+       unsigned long flags;
+       u32 int_value;
+       u32 int_type;
+       u32 mask = BIT(d->hwirq);
+       int ret = 0;
+
+       spin_lock_irqsave(&chip->bgpio_lock, flags);
+
+       int_value = ioread32(cgpio->regs + CDNS_GPIO_IRQ_VALUE) & ~mask;
+       int_type = ioread32(cgpio->regs + CDNS_GPIO_IRQ_TYPE) & ~mask;
+
+       /*
+        * The GPIO controller doesn't have an ACK register.
+        * All interrupt statuses are cleared on a status register read.
+        * Don't support edge interrupts for now.
+        */
+
+       if (type == IRQ_TYPE_LEVEL_HIGH) {
+               int_type |= mask;
+               int_value |= mask;
+       } else if (type == IRQ_TYPE_LEVEL_LOW) {
+               int_type |= mask;
+       } else {
+               ret = -EINVAL;
+               goto err_irq_type;
+       }
+
+       iowrite32(int_value, cgpio->regs + CDNS_GPIO_IRQ_VALUE);
+       iowrite32(int_type, cgpio->regs + CDNS_GPIO_IRQ_TYPE);
+
+err_irq_type:
+       spin_unlock_irqrestore(&chip->bgpio_lock, flags);
+       return ret;
+}
+
+static void cdns_gpio_irq_handler(struct irq_desc *desc)
+{
+       struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+       struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip);
+       struct irq_chip *irqchip = irq_desc_get_chip(desc);
+       unsigned long status;
+       int hwirq;
+
+       chained_irq_enter(irqchip, desc);
+
+       status = ioread32(cgpio->regs + CDNS_GPIO_IRQ_STATUS) &
+               ~ioread32(cgpio->regs + CDNS_GPIO_IRQ_MASK);
+
+       for_each_set_bit(hwirq, &status, chip->ngpio)
+               generic_handle_irq(irq_find_mapping(chip->irq.domain, hwirq));
+
+       chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip cdns_gpio_irqchip = {
+       .name           = "cdns-gpio",
+       .irq_mask       = cdns_gpio_irq_mask,
+       .irq_unmask     = cdns_gpio_irq_unmask,
+       .irq_set_type   = cdns_gpio_irq_set_type
+};
+
+static int cdns_gpio_probe(struct platform_device *pdev)
+{
+       struct cdns_gpio_chip *cgpio;
+       struct resource *res;
+       int ret, irq;
+       u32 dir_prev;
+       u32 num_gpios = 32;
+
+       cgpio = devm_kzalloc(&pdev->dev, sizeof(*cgpio), GFP_KERNEL);
+       if (!cgpio)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       cgpio->regs = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(cgpio->regs))
+               return PTR_ERR(cgpio->regs);
+
+       of_property_read_u32(pdev->dev.of_node, "ngpios", &num_gpios);
+
+       if (num_gpios > 32) {
+               dev_err(&pdev->dev, "ngpios must be less or equal 32\n");
+               return -EINVAL;
+       }
+
+       /*
+        * Set all pins as inputs by default, otherwise:
+        * gpiochip_lock_as_irq:
+        * tried to flag a GPIO set as output for IRQ
+        * Generic GPIO driver stores the direction value internally,
+        * so it needs to be changed before bgpio_init() is called.
+        */
+       dir_prev = ioread32(cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+       iowrite32(GENMASK(num_gpios - 1, 0),
+                 cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+
+       ret = bgpio_init(&cgpio->gc, &pdev->dev, 4,
+                        cgpio->regs + CDNS_GPIO_INPUT_VALUE,
+                        cgpio->regs + CDNS_GPIO_OUTPUT_VALUE,
+                        NULL,
+                        NULL,
+                        cgpio->regs + CDNS_GPIO_DIRECTION_MODE,
+                        BGPIOF_READ_OUTPUT_REG_SET);
+       if (ret) {
+               dev_err(&pdev->dev, "Failed to register generic gpio, %d\n",
+                       ret);
+               goto err_revert_dir;
+       }
+
+       cgpio->gc.label = dev_name(&pdev->dev);
+       cgpio->gc.ngpio = num_gpios;
+       cgpio->gc.parent = &pdev->dev;
+       cgpio->gc.base = -1;
+       cgpio->gc.owner = THIS_MODULE;
+       cgpio->gc.request = cdns_gpio_request;
+       cgpio->gc.free = cdns_gpio_free;
+
+       cgpio->pclk = devm_clk_get(&pdev->dev, NULL);
+       if (IS_ERR(cgpio->pclk)) {
+               ret = PTR_ERR(cgpio->pclk);
+               dev_err(&pdev->dev,
+                       "Failed to retrieve peripheral clock, %d\n", ret);
+               goto err_revert_dir;
+       }
+
+       ret = clk_prepare_enable(cgpio->pclk);
+       if (ret) {
+               dev_err(&pdev->dev,
+                       "Failed to enable the peripheral clock, %d\n", ret);
+               goto err_revert_dir;
+       }
+
+       ret = devm_gpiochip_add_data(&pdev->dev, &cgpio->gc, cgpio);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+               goto err_disable_clk;
+       }
+
+       /*
+        * irq_chip support
+        */
+       irq = platform_get_irq(pdev, 0);
+       if (irq >= 0) {
+               ret = gpiochip_irqchip_add(&cgpio->gc, &cdns_gpio_irqchip,
+                                          0, handle_level_irq,
+                                          IRQ_TYPE_NONE);
+               if (ret) {
+                       dev_err(&pdev->dev, "Could not add irqchip, %d\n",
+                               ret);
+                       goto err_disable_clk;
+               }
+               gpiochip_set_chained_irqchip(&cgpio->gc, &cdns_gpio_irqchip,
+                                            irq, cdns_gpio_irq_handler);
+       }
+
+       cgpio->bypass_orig = ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+       /*
+        * Enable gpio outputs, ignored for input direction
+        */
+       iowrite32(GENMASK(num_gpios - 1, 0),
+                 cgpio->regs + CDNS_GPIO_OUTPUT_EN);
+       iowrite32(0, cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+
+       platform_set_drvdata(pdev, cgpio);
+       return 0;
+
+err_disable_clk:
+       clk_disable_unprepare(cgpio->pclk);
+
+err_revert_dir:
+       iowrite32(dir_prev, cgpio->regs + CDNS_GPIO_DIRECTION_MODE);
+
+       return ret;
+}
+
+static int cdns_gpio_remove(struct platform_device *pdev)
+{
+       struct cdns_gpio_chip *cgpio = platform_get_drvdata(pdev);
+
+       iowrite32(cgpio->bypass_orig, cgpio->regs + CDNS_GPIO_BYPASS_MODE);
+       clk_disable_unprepare(cgpio->pclk);
+
+       return 0;
+}
+
+static const struct of_device_id cdns_of_ids[] = {
+       { .compatible = "cdns,gpio-r1p02" },
+       { /* sentinel */ },
+};
+
+static struct platform_driver cdns_gpio_driver = {
+       .driver = {
+               .name = "cdns-gpio",
+               .of_match_table = cdns_of_ids,
+       },
+       .probe = cdns_gpio_probe,
+       .remove = cdns_gpio_remove,
+};
+module_platform_driver(cdns_gpio_driver);
+
+MODULE_AUTHOR("Jan Kotas <jank@cadence.com>");
+MODULE_DESCRIPTION("Cadence GPIO driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cdns-gpio");