START = start.o #resetvec.o
SOBJS = cache.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- pci.o pcie_indirect.o i2c.o spd_sdram.o
+ pci.o pcie_indirect.o spd_sdram.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+++ /dev/null
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao <x.xiao@motorola.com>
- * Adapted for Motorola 85xx chip.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Modified for MPC86xx by Jeff Brown
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CFG_HZ/4)
-
-#define I2C_Addr ((u8 *)(CFG_CCSRBAR + 0x3100))
-
-#define I2CADR &I2C_Addr[0]
-#define I2CFDR &I2C_Addr[4]
-#define I2CCCR &I2C_Addr[8]
-#define I2CCSR &I2C_Addr[12]
-#define I2CCDR &I2C_Addr[16]
-#define I2CDFSRR &I2C_Addr[20]
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-void
-i2c_init(int speed, int slaveadd)
-{
- /* stop I2C controller */
- writeb(0x0, I2CCCR);
-
- /* set clock */
- writeb(0x3f, I2CFDR);
-
- /* set default filter */
- writeb(0x10, I2CDFSRR);
-
- /* write slave address */
- writeb(slaveadd, I2CADR);
-
- /* clear status register */
- writeb(0x0, I2CCSR);
-
- /* start I2C controller */
- writeb(MPC86xx_I2CCR_MEN, I2CCCR);
-}
-
-static __inline__ int
-i2c_wait4bus(void)
-{
- ulong timeval = get_timer(0);
-
- while (readb(I2CCSR) & MPC86xx_I2CSR_MBB) {
- if (get_timer(timeval) > TIMEOUT) {
- return -1;
- }
- }
-
- return 0;
-}
-
-static __inline__ int
-i2c_wait(int write)
-{
- u32 csr;
- ulong timeval = get_timer(0);
-
- do {
- csr = readb(I2CCSR);
- if (!(csr & MPC86xx_I2CSR_MIF))
- continue;
-
- writeb(0x0, I2CCSR);
-
- if (csr & MPC86xx_I2CSR_MAL) {
- debug("i2c_wait: MAL\n");
- return -1;
- }
-
- if (!(csr & MPC86xx_I2CSR_MCF)) {
- debug("i2c_wait: unfinished\n");
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & MPC86xx_I2CSR_RXAK)) {
- debug("i2c_wait: No RXACK\n");
- return -1;
- }
-
- return 0;
- } while (get_timer(timeval) < TIMEOUT);
-
- debug("i2c_wait: timed out\n");
- return -1;
-}
-
-static __inline__ int
-i2c_write_addr(u8 dev, u8 dir, int rsta)
-{
- writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX
- | (rsta ? MPC86xx_I2CCR_RSTA : 0),
- I2CCCR);
-
- writeb((dev << 1) | dir, I2CCDR);
-
- if (i2c_wait(I2C_WRITE) < 0)
- return 0;
-
- return 1;
-}
-
-static __inline__ int
-__i2c_write(u8 *data, int length)
-{
- int i;
-
- writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA | MPC86xx_I2CCR_MTX,
- I2CCCR);
-
- for (i = 0; i < length; i++) {
- writeb(data[i], I2CCDR);
-
- if (i2c_wait(I2C_WRITE) < 0)
- break;
- }
-
- return i;
-}
-
-static __inline__ int
-__i2c_read(u8 *data, int length)
-{
- int i;
-
- writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA
- | ((length == 1) ? MPC86xx_I2CCR_TXAK : 0),
- I2CCCR);
-
- /* dummy read */
- readb(I2CCDR);
-
- for (i = 0; i < length; i++) {
- if (i2c_wait(I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_MSTA
- | MPC86xx_I2CCR_TXAK, I2CCCR);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writeb(MPC86xx_I2CCR_MEN | MPC86xx_I2CCR_TXAK, I2CCCR);
-
- data[i] = readb(I2CCDR);
- }
-
- return i;
-}
-
-int
-i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) &addr;
-
- if (i2c_wait4bus() < 0)
- goto exit;
-
- if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write(&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr(dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read(data, length);
-
-exit:
- writeb(MPC86xx_I2CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int
-i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) &addr;
-
- if (i2c_wait4bus() < 0)
- goto exit;
-
- if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write(&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write(data, length);
-
-exit:
- writeb(MPC86xx_I2CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int
-i2c_probe(uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay(10000);
-
- return i2c_read(chip, 0, 1, (char *)&tmp, 1);
-}
-
-uchar
-i2c_reg_read(uchar i2c_addr, uchar reg)
-{
- char buf[1];
-
- i2c_read(i2c_addr, reg, 1, buf, 1);
-
- return buf[0];
-}
-
-void
-i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
-{
- i2c_write(i2c_addr, reg, 1, &val, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
videomodes.o w83c553f.o \
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
- rpx_pcmcia.o
+ rpx_pcmcia.o \
+ fsl_i2c.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--- /dev/null
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <command.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#include <asm/io.h>
+#include <asm/fsl_i2c.h>
+
+#define I2C_TIMEOUT (CFG_HZ / 4)
+
+#define I2C ((struct fsl_i2c *)(CFG_IMMR + CFG_I2C_OFFSET))
+
+
+void
+i2c_init(int speed, int slaveadd)
+{
+ /* stop I2C controller */
+ writeb(0x0 , &I2C->cr);
+
+ /* set clock */
+ writeb(0x3f, &I2C->fdr);
+
+ /* set default filter */
+ writeb(0x10, &I2C->dfsrr);
+
+ /* write slave address */
+ writeb(slaveadd, &I2C->adr);
+
+ /* clear status register */
+ writeb(0x0, &I2C->sr);
+
+ /* start I2C controller */
+ writeb(I2C_CR_MEN, &I2C->cr);
+}
+
+static __inline__ int
+i2c_wait4bus(void)
+{
+ ulong timeval = get_timer (0);
+
+ while (readb(&I2C->sr) & I2C_SR_MBB) {
+ if (get_timer(timeval) > I2C_TIMEOUT) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static __inline__ int
+i2c_wait(int write)
+{
+ u32 csr;
+ ulong timeval = get_timer(0);
+
+ do {
+ csr = readb(&I2C->sr);
+ if (!(csr & I2C_SR_MIF))
+ continue;
+
+ writeb(0x0, &I2C->sr);
+
+ if (csr & I2C_SR_MAL) {
+ debug("i2c_wait: MAL\n");
+ return -1;
+ }
+
+ if (!(csr & I2C_SR_MCF)) {
+ debug("i2c_wait: unfinished\n");
+ return -1;
+ }
+
+ if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
+ debug("i2c_wait: No RXACK\n");
+ return -1;
+ }
+
+ return 0;
+ } while (get_timer (timeval) < I2C_TIMEOUT);
+
+ debug("i2c_wait: timed out\n");
+ return -1;
+}
+
+static __inline__ int
+i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
+ | (rsta ? I2C_CR_RSTA : 0),
+ &I2C->cr);
+
+ writeb((dev << 1) | dir, &I2C->dr);
+
+ if (i2c_wait(I2C_WRITE) < 0)
+ return 0;
+
+ return 1;
+}
+
+static __inline__ int
+__i2c_write(u8 *data, int length)
+{
+ int i;
+
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+ &I2C->cr);
+
+ for (i = 0; i < length; i++) {
+ writeb(data[i], &I2C->dr);
+
+ if (i2c_wait(I2C_WRITE) < 0)
+ break;
+ }
+
+ return i;
+}
+
+static __inline__ int
+__i2c_read(u8 *data, int length)
+{
+ int i;
+
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
+ &I2C->cr);
+
+ /* dummy read */
+ readb(&I2C->dr);
+
+ for (i = 0; i < length; i++) {
+ if (i2c_wait(I2C_READ) < 0)
+ break;
+
+ /* Generate ack on last next to last byte */
+ if (i == length - 2)
+ writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
+ &I2C->cr);
+
+ /* Generate stop on last byte */
+ if (i == length - 1)
+ writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+
+ data[i] = readb(&I2C->dr);
+ }
+
+ return i;
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ int i = 0;
+ u8 *a = (u8*)&addr;
+
+ if (i2c_wait4bus () < 0)
+ goto exit;
+
+ if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write(&a[4 - alen], alen) != alen)
+ goto exit;
+
+ if (i2c_write_addr(dev, I2C_READ, 1) == 0)
+ goto exit;
+
+ i = __i2c_read(data, length);
+
+ exit:
+ writeb(I2C_CR_MEN, &I2C->cr);
+
+ return !(i == length);
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+ int i = 0;
+ u8 *a = (u8*)&addr;
+
+ if (i2c_wait4bus() < 0)
+ goto exit;
+
+ if (i2c_write_addr(dev, I2C_WRITE, 0) == 0)
+ goto exit;
+
+ if (__i2c_write(&a[4 - alen], alen) != alen)
+ goto exit;
+
+ i = __i2c_write(data, length);
+
+ exit:
+ writeb(I2C_CR_MEN, &I2C->cr);
+
+ return !(i == length);
+}
+
+int
+i2c_probe(uchar chip)
+{
+ int tmp;
+
+ /*
+ * Try to read the first location of the chip. The underlying
+ * driver doesn't appear to support sending just the chip address
+ * and looking for an <ACK> back.
+ */
+ udelay(10000);
+
+ return i2c_read(chip, 0, 1, (uchar *)&tmp, 1);
+}
+
+uchar
+i2c_reg_read(uchar i2c_addr, uchar reg)
+{
+ uchar buf[1];
+
+ i2c_read(i2c_addr, reg, 1, buf, 1);
+
+ return buf[0];
+}
+
+void
+i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
+{
+ i2c_write(i2c_addr, reg, 1, &val, 1);
+}
+
+#endif /* CONFIG_HARD_I2C */
--- /dev/null
+/*
+ * Freescale I2C Controller
+ *
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ *
+ * Based on earlier versions by Gleb Natapov <gnatapov@mrv.com>,
+ * Xianghua Xiao <x.xiao@motorola.com>, Eran Liberty (liberty@freescale.com),
+ * and Jeff Brown.
+ * Some bits are taken from linux driver writen by adrian@humboldt.co.uk.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_FSL_I2C_H_
+#define _ASM_FSL_I2C_H_
+
+#include <asm/types.h>
+
+typedef struct fsl_i2c {
+
+ u8 adr; /* I2C slave address */
+ u8 res0[3];
+#define I2C_ADR 0xFE
+#define I2C_ADR_SHIFT 1
+#define I2C_ADR_RES ~(I2C_ADR)
+
+ u8 fdr; /* I2C frequency divider register */
+ u8 res1[3];
+#define IC2_FDR 0x3F
+#define IC2_FDR_SHIFT 0
+#define IC2_FDR_RES ~(IC2_FDR)
+
+ u8 cr; /* I2C control redister */
+ u8 res2[3];
+#define I2C_CR_MEN 0x80
+#define I2C_CR_MIEN 0x40
+#define I2C_CR_MSTA 0x20
+#define I2C_CR_MTX 0x10
+#define I2C_CR_TXAK 0x08
+#define I2C_CR_RSTA 0x04
+#define I2C_CR_BCST 0x01
+
+ u8 sr; /* I2C status register */
+ u8 res3[3];
+#define I2C_SR_MCF 0x80
+#define I2C_SR_MAAS 0x40
+#define I2C_SR_MBB 0x20
+#define I2C_SR_MAL 0x10
+#define I2C_SR_BCSTM 0x08
+#define I2C_SR_SRW 0x04
+#define I2C_SR_MIF 0x02
+#define I2C_SR_RXAK 0x01
+
+ u8 dr; /* I2C data register */
+ u8 res4[3];
+#define I2C_DR 0xFF
+#define I2C_DR_SHIFT 0
+#define I2C_DR_RES ~(I2C_DR)
+
+ u8 dfsrr; /* I2C digital filter sampling rate register */
+ u8 res5[3];
+#define I2C_DFSRR 0x3F
+#define I2C_DFSRR_SHIFT 0
+#define I2C_DFSRR_RES ~(I2C_DR)
+
+ /* Fill out the reserved block */
+ u8 res6[0xE8];
+} fsl_i2c_t;
+
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#endif /* _ASM_I2C_H_ */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x3100
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
/*
projects / project / bcm63xx / u-boot.git / commitdiff