As it has some function definitions, move them to connector.h.
The remaining conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
--- /dev/null
+:orphan:
+
+================
+Kernel Connector
+================
+
+Kernel connector - new netlink based userspace <-> kernel space easy
+to use communication module.
+
+The Connector driver makes it easy to connect various agents using a
+netlink based network. One must register a callback and an identifier.
+When the driver receives a special netlink message with the appropriate
+identifier, the appropriate callback will be called.
+
+From the userspace point of view it's quite straightforward:
+
+ - socket();
+ - bind();
+ - send();
+ - recv();
+
+But if kernelspace wants to use the full power of such connections, the
+driver writer must create special sockets, must know about struct sk_buff
+handling, etc... The Connector driver allows any kernelspace agents to use
+netlink based networking for inter-process communication in a significantly
+easier way::
+
+ int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
+ void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
+ void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
+
+ struct cb_id
+ {
+ __u32 idx;
+ __u32 val;
+ };
+
+idx and val are unique identifiers which must be registered in the
+connector.h header for in-kernel usage. `void (*callback) (void *)` is a
+callback function which will be called when a message with above idx.val
+is received by the connector core. The argument for that function must
+be dereferenced to `struct cn_msg *`::
+
+ struct cn_msg
+ {
+ struct cb_id id;
+
+ __u32 seq;
+ __u32 ack;
+
+ __u32 len; /* Length of the following data */
+ __u8 data[0];
+ };
+
+Connector interfaces
+====================
+
+ .. kernel-doc:: include/linux/connector.h
+
+ Note:
+ When registering new callback user, connector core assigns
+ netlink group to the user which is equal to its id.idx.
+
+Protocol description
+====================
+
+The current framework offers a transport layer with fixed headers. The
+recommended protocol which uses such a header is as following:
+
+msg->seq and msg->ack are used to determine message genealogy. When
+someone sends a message, they use a locally unique sequence and random
+acknowledge number. The sequence number may be copied into
+nlmsghdr->nlmsg_seq too.
+
+The sequence number is incremented with each message sent.
+
+If you expect a reply to the message, then the sequence number in the
+received message MUST be the same as in the original message, and the
+acknowledge number MUST be the same + 1.
+
+If we receive a message and its sequence number is not equal to one we
+are expecting, then it is a new message. If we receive a message and
+its sequence number is the same as one we are expecting, but its
+acknowledge is not equal to the sequence number in the original
+message + 1, then it is a new message.
+
+Obviously, the protocol header contains the above id.
+
+The connector allows event notification in the following form: kernel
+driver or userspace process can ask connector to notify it when
+selected ids will be turned on or off (registered or unregistered its
+callback). It is done by sending a special command to the connector
+driver (it also registers itself with id={-1, -1}).
+
+As example of this usage can be found in the cn_test.c module which
+uses the connector to request notification and to send messages.
+
+Reliability
+===========
+
+Netlink itself is not a reliable protocol. That means that messages can
+be lost due to memory pressure or process' receiving queue overflowed,
+so caller is warned that it must be prepared. That is why the struct
+cn_msg [main connector's message header] contains u32 seq and u32 ack
+fields.
+
+Userspace usage
+===============
+
+2.6.14 has a new netlink socket implementation, which by default does not
+allow people to send data to netlink groups other than 1.
+So, if you wish to use a netlink socket (for example using connector)
+with a different group number, the userspace application must subscribe to
+that group first. It can be achieved by the following pseudocode::
+
+ s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+
+ l_local.nl_family = AF_NETLINK;
+ l_local.nl_groups = 12345;
+ l_local.nl_pid = 0;
+
+ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+ perror("bind");
+ close(s);
+ return -1;
+ }
+
+ {
+ int on = l_local.nl_groups;
+ setsockopt(s, 270, 1, &on, sizeof(on));
+ }
+
+Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
+option. To drop a multicast subscription, one should call the above socket
+option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+
+2.6.14 netlink code only allows to select a group which is less or equal to
+the maximum group number, which is used at netlink_kernel_create() time.
+In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
+group number 12345, you must increment CN_NETLINK_USERS to that number.
+Additional 0xf numbers are allocated to be used by non-in-kernel users.
+
+Due to this limitation, group 0xffffffff does not work now, so one can
+not use add/remove connector's group notifications, but as far as I know,
+only cn_test.c test module used it.
+
+Some work in netlink area is still being done, so things can be changed in
+2.6.15 timeframe, if it will happen, documentation will be updated for that
+kernel.
+
+Code samples
+============
+
+Sample code for a connector test module and user space can be found
+in samples/connector/. To build this code, enable CONFIG_CONNECTOR
+and CONFIG_SAMPLES.
+++ /dev/null
-/*****************************************/
-Kernel Connector.
-/*****************************************/
-
-Kernel connector - new netlink based userspace <-> kernel space easy
-to use communication module.
-
-The Connector driver makes it easy to connect various agents using a
-netlink based network. One must register a callback and an identifier.
-When the driver receives a special netlink message with the appropriate
-identifier, the appropriate callback will be called.
-
-From the userspace point of view it's quite straightforward:
-
- socket();
- bind();
- send();
- recv();
-
-But if kernelspace wants to use the full power of such connections, the
-driver writer must create special sockets, must know about struct sk_buff
-handling, etc... The Connector driver allows any kernelspace agents to use
-netlink based networking for inter-process communication in a significantly
-easier way:
-
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
-void cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __group, int gfp_mask);
-void cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __group, int gfp_mask);
-
-struct cb_id
-{
- __u32 idx;
- __u32 val;
-};
-
-idx and val are unique identifiers which must be registered in the
-connector.h header for in-kernel usage. void (*callback) (void *) is a
-callback function which will be called when a message with above idx.val
-is received by the connector core. The argument for that function must
-be dereferenced to struct cn_msg *.
-
-struct cn_msg
-{
- struct cb_id id;
-
- __u32 seq;
- __u32 ack;
-
- __u32 len; /* Length of the following data */
- __u8 data[0];
-};
-
-/*****************************************/
-Connector interfaces.
-/*****************************************/
-
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
-
- Registers new callback with connector core.
-
- struct cb_id *id - unique connector's user identifier.
- It must be registered in connector.h for legal in-kernel users.
- char *name - connector's callback symbolic name.
- void (*callback) (struct cn..) - connector's callback.
- cn_msg and the sender's credentials
-
-
-void cn_del_callback(struct cb_id *id);
-
- Unregisters new callback with connector core.
-
- struct cb_id *id - unique connector's user identifier.
-
-
-int cn_netlink_send_multi(struct cn_msg *msg, u16 len, u32 portid, u32 __groups, int gfp_mask);
-int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 __groups, int gfp_mask);
-
- Sends message to the specified groups. It can be safely called from
- softirq context, but may silently fail under strong memory pressure.
- If there are no listeners for given group -ESRCH can be returned.
-
- struct cn_msg * - message header(with attached data).
- u16 len - for *_multi multiple cn_msg messages can be sent
- u32 port - destination port.
- If non-zero the message will be sent to the
- given port, which should be set to the
- original sender.
- u32 __group - destination group.
- If port and __group is zero, then appropriate group will
- be searched through all registered connector users,
- and message will be delivered to the group which was
- created for user with the same ID as in msg.
- If __group is not zero, then message will be delivered
- to the specified group.
- int gfp_mask - GFP mask.
-
- Note: When registering new callback user, connector core assigns
- netlink group to the user which is equal to its id.idx.
-
-/*****************************************/
-Protocol description.
-/*****************************************/
-
-The current framework offers a transport layer with fixed headers. The
-recommended protocol which uses such a header is as following:
-
-msg->seq and msg->ack are used to determine message genealogy. When
-someone sends a message, they use a locally unique sequence and random
-acknowledge number. The sequence number may be copied into
-nlmsghdr->nlmsg_seq too.
-
-The sequence number is incremented with each message sent.
-
-If you expect a reply to the message, then the sequence number in the
-received message MUST be the same as in the original message, and the
-acknowledge number MUST be the same + 1.
-
-If we receive a message and its sequence number is not equal to one we
-are expecting, then it is a new message. If we receive a message and
-its sequence number is the same as one we are expecting, but its
-acknowledge is not equal to the sequence number in the original
-message + 1, then it is a new message.
-
-Obviously, the protocol header contains the above id.
-
-The connector allows event notification in the following form: kernel
-driver or userspace process can ask connector to notify it when
-selected ids will be turned on or off (registered or unregistered its
-callback). It is done by sending a special command to the connector
-driver (it also registers itself with id={-1, -1}).
-
-As example of this usage can be found in the cn_test.c module which
-uses the connector to request notification and to send messages.
-
-/*****************************************/
-Reliability.
-/*****************************************/
-
-Netlink itself is not a reliable protocol. That means that messages can
-be lost due to memory pressure or process' receiving queue overflowed,
-so caller is warned that it must be prepared. That is why the struct
-cn_msg [main connector's message header] contains u32 seq and u32 ack
-fields.
-
-/*****************************************/
-Userspace usage.
-/*****************************************/
-
-2.6.14 has a new netlink socket implementation, which by default does not
-allow people to send data to netlink groups other than 1.
-So, if you wish to use a netlink socket (for example using connector)
-with a different group number, the userspace application must subscribe to
-that group first. It can be achieved by the following pseudocode:
-
-s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
-
-l_local.nl_family = AF_NETLINK;
-l_local.nl_groups = 12345;
-l_local.nl_pid = 0;
-
-if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
- perror("bind");
- close(s);
- return -1;
-}
-
-{
- int on = l_local.nl_groups;
- setsockopt(s, 270, 1, &on, sizeof(on));
-}
-
-Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
-option. To drop a multicast subscription, one should call the above socket
-option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
-
-2.6.14 netlink code only allows to select a group which is less or equal to
-the maximum group number, which is used at netlink_kernel_create() time.
-In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
-group number 12345, you must increment CN_NETLINK_USERS to that number.
-Additional 0xf numbers are allocated to be used by non-in-kernel users.
-
-Due to this limitation, group 0xffffffff does not work now, so one can
-not use add/remove connector's group notifications, but as far as I know,
-only cn_test.c test module used it.
-
-Some work in netlink area is still being done, so things can be changed in
-2.6.15 timeframe, if it will happen, documentation will be updated for that
-kernel.
-
-/*****************************************/
-Code samples
-/*****************************************/
-
-Sample code for a connector test module and user space can be found
-in samples/connector/. To build this code, enable CONFIG_CONNECTOR
-and CONFIG_SAMPLES.
default y
---help---
This allows to communicate with userspace using connector. For more
- information see <file:Documentation/connector/connector.txt>.
+ information see <file:Documentation/connector/connector.rst>.
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
struct cn_queue_dev *cbdev;
};
+/**
+ * cn_add_callback() - Registers new callback with connector core.
+ *
+ * @id: unique connector's user identifier.
+ * It must be registered in connector.h for legal
+ * in-kernel users.
+ * @name: connector's callback symbolic name.
+ * @callback: connector's callback.
+ * parameters are %cn_msg and the sender's credentials
+ */
int cn_add_callback(struct cb_id *id, const char *name,
void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
-void cn_del_callback(struct cb_id *);
+/**
+ * cn_del_callback() - Unregisters new callback with connector core.
+ *
+ * @id: unique connector's user identifier.
+ */
+void cn_del_callback(struct cb_id *id);
+
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg: message header(with attached data).
+ * @len: Number of @msg to be sent.
+ * @portid: destination port.
+ * If non-zero the message will be sent to the given port,
+ * which should be set to the original sender.
+ * @group: destination group.
+ * If @portid and @group is zero, then appropriate group will
+ * be searched through all registered connector users, and
+ * message will be delivered to the group which was created
+ * for user with the same ID as in @msg.
+ * If @group is not zero, then message will be delivered
+ * to the specified group.
+ * @gfp_mask: GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
int cn_netlink_send_mult(struct cn_msg *msg, u16 len, u32 portid, u32 group, gfp_t gfp_mask);
+
+/**
+ * cn_netlink_send_mult - Sends message to the specified groups.
+ *
+ * @msg: message header(with attached data).
+ * @portid: destination port.
+ * If non-zero the message will be sent to the given port,
+ * which should be set to the original sender.
+ * @group: destination group.
+ * If @portid and @group is zero, then appropriate group will
+ * be searched through all registered connector users, and
+ * message will be delivered to the group which was created
+ * for user with the same ID as in @msg.
+ * If @group is not zero, then message will be delivered
+ * to the specified group.
+ * @gfp_mask: GFP mask.
+ *
+ * It can be safely called from softirq context, but may silently
+ * fail under strong memory pressure.
+ *
+ * If there are no listeners for given group %-ESRCH can be returned.
+ */
int cn_netlink_send(struct cn_msg *msg, u32 portid, u32 group, gfp_t gfp_mask);
int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
When enabled, this builds both a sample kernel module for
the connector interface and a user space tool to communicate
with it.
- See also Documentation/connector/connector.txt
+ See also Documentation/connector/connector.rst
config SAMPLE_HIDRAW
bool "hidraw sample"
projects / openwrt / staging / blogic.git / commitdiff