Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
ifeq ($(LINUX_VERSION),3.9.11)
LINUX_KERNEL_MD5SUM:=edbf88eb7f7d34dbd5d3887726790755
endif
-ifeq ($(LINUX_VERSION),3.10.1)
- LINUX_KERNEL_MD5SUM:=4c8ed240943c8750a89cc307637bd74d
+ifeq ($(LINUX_VERSION),3.10.2)
+ LINUX_KERNEL_MD5SUM:=06d6bf3218c8f37d6320473b93382fe2
endif
# disable the md5sum check for unknown kernel versions
CFLAGS:=-Os -pipe -mips32r2 -mtune=34kc -fno-caller-saves -mno-branch-likely
SUBTARGETS:=generic nand
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
struct ath79_spi {
struct spi_bitbang bitbang;
u32 ioc_base;
-@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
+@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
if (is_active) {
/* set initial clock polarity */
-@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
+@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
}
mutex_unlock(&flash->lock);
return 0;
-@@ -1021,6 +1044,12 @@ static int m25p_probe(struct spi_device
+@@ -1021,6 +1044,12 @@ static int m25p_probe(struct spi_device
flash->mtd._unlock = m25p80_unlock;
}
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -1121,7 +1121,9 @@ static int m25p_probe(struct spi_device
+@@ -1121,7 +1121,9 @@ static int m25p_probe(struct spi_device
/* partitions should match sector boundaries; and it may be good to
* use readonly partitions for writeprotected sectors (BP2..BP0).
*/
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -1071,6 +1071,7 @@ static int m25p_probe(struct spi_device
+@@ -1071,6 +1071,7 @@ static int m25p_probe(struct spi_device
if (info->flags & M25P_NO_ERASE)
flash->mtd.flags |= MTD_NO_ERASE;
--- a/drivers/Makefile
+++ b/drivers/Makefile
-@@ -63,8 +63,8 @@ obj-$(CONFIG_IDE) += ide/
+@@ -62,8 +62,8 @@ obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
-@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
+@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
/* nothing to do */
}
#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
.cs_line = 0,
};
#include <asm/uaccess.h>
#include <linux/proc_fs.h>
-@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
+@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
topt = (__be32 *)(t1 + 1);
if (tsecr) {
#include <linux/netdevice.h>
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
-@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
+@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
{
if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
return 0;
ptr = ip6hoff + sizeof(struct ipv6hdr);
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
-@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
+@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
if (!pskb_may_pull(skb, hlen))
return -EINVAL;
FEATURES:=squashfs usb pci pcie gpio
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
-@@ -35,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE
+@@ -36,8 +36,14 @@ config BCMA_DRIVER_PCI_HOSTMODE
PCI core hostmode operation (external PCI bus).
config BCMA_HOST_SOC
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
-@@ -188,6 +188,11 @@ struct bcma_host_ops {
+@@ -189,6 +189,11 @@ struct bcma_host_ops {
#define BCMA_PKG_ID_BCM5357 11
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -218,7 +218,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -237,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b
err = bcma_bus_scan(bus);
if (err) {
bcma_err(bus, "Failed to scan: %d\n", err);
FEATURES:=ext4 audio usb usbgadget display gpio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += brcm2708-gpu-fw kmod-usb-hid kmod-sound-core kmod-sound-arm-bcm2835
-diff -urN linux-3.10/drivers/usb/core/generic.c linux-rpi-3.10.y/drivers/usb/core/generic.c
---- linux-3.10/drivers/usb/core/generic.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/core/generic.c 2013-07-06 15:25:50.000000000 +0100
-@@ -152,6 +152,7 @@
+--- a/drivers/usb/core/generic.c
++++ b/drivers/usb/core/generic.c
+@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_
dev_warn(&udev->dev,
"no configuration chosen from %d choice%s\n",
num_configs, plural(num_configs));
}
return i;
}
-diff -urN linux-3.10/drivers/usb/core/message.c linux-rpi-3.10.y/drivers/usb/core/message.c
---- linux-3.10/drivers/usb/core/message.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/core/message.c 2013-07-06 15:25:50.000000000 +0100
-@@ -1875,6 +1875,85 @@
+--- a/drivers/usb/core/message.c
++++ b/drivers/usb/core/message.c
+@@ -1875,6 +1875,85 @@ free_interfaces:
if (cp->string == NULL &&
!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
/* Now that the interfaces are installed, re-enable LPM. */
usb_unlocked_enable_lpm(dev);
-diff -urN linux-3.10/drivers/usb/core/otg_whitelist.h linux-rpi-3.10.y/drivers/usb/core/otg_whitelist.h
---- linux-3.10/drivers/usb/core/otg_whitelist.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/core/otg_whitelist.h 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/usb/core/otg_whitelist.h
++++ b/drivers/usb/core/otg_whitelist.h
@@ -19,33 +19,82 @@
static struct usb_device_id whitelist_table [] = {
static int is_targeted(struct usb_device *dev)
{
struct usb_device_id *id = whitelist_table;
-@@ -55,58 +104,83 @@
+@@ -55,58 +104,83 @@ static int is_targeted(struct usb_device
return 1;
/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
#endif
}
-diff -urN linux-3.10/drivers/usb/gadget/file_storage.c linux-rpi-3.10.y/drivers/usb/gadget/file_storage.c
---- linux-3.10/drivers/usb/gadget/file_storage.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/gadget/file_storage.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/gadget/file_storage.c
@@ -0,0 +1,3676 @@
+/*
+ * file_storage.c -- File-backed USB Storage Gadget, for USB development
+ kref_put(&fsg->ref, fsg_release);
+}
+module_exit(fsg_cleanup);
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/changes.txt linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/changes.txt
---- linux-3.10/drivers/usb/host/dwc_common_port/changes.txt 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/changes.txt 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/changes.txt
@@ -0,0 +1,174 @@
+
+dwc_read_reg32() and friends now take an additional parameter, a pointer to an
+A DWC_LIBMODULE #define has also been added. If this is not defined, then the
+module code in dwc_common_linux.c is not compiled in. This allows linking the
+library code directly into a driver module, instead of as a standalone module.
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/doc/doxygen.cfg linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
---- linux-3.10/drivers/usb/host/dwc_common_port/doc/doxygen.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/doc/doxygen.cfg 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
@@ -0,0 +1,270 @@
+# Doxyfile 1.4.5
+
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+SEARCHENGINE = NO
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_cc.c
@@ -0,0 +1,532 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $
+}
+
+#endif /* DWC_CCLIB */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_cc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_cc.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_cc.h
@@ -0,0 +1,225 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $
+
+#endif /* _DWC_CC_H_ */
+
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
@@ -0,0 +1,1308 @@
+#include "dwc_os.h"
+#include "dwc_list.h"
+{
+ return wq->pending;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_linux.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_linux.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_linux.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c
@@ -0,0 +1,1426 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+MODULE_LICENSE ("GPL");
+
+#endif /* DWC_LIBMODULE */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
@@ -0,0 +1,1275 @@
+#include "dwc_os.h"
+#include "dwc_list.h"
+{
+ return wq->pending;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c
@@ -0,0 +1,308 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $
+}
+
+#endif /* DWC_CRYPTOLIB */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_crypto.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_crypto.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h
@@ -0,0 +1,111 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $
+#endif
+
+#endif /* _DWC_CRYPTO_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_dh.c
@@ -0,0 +1,291 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $
+#endif /* !CONFIG_MACH_IPMATE */
+
+#endif /* DWC_CRYPTOLIB */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_dh.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_dh.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_dh.h
@@ -0,0 +1,106 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $
+#endif
+
+#endif /* _DWC_DH_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_list.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_list.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_list.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_list.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_list.h
@@ -0,0 +1,594 @@
+/* $OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $ */
+/* $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $ */
+#endif
+
+#endif /* _DWC_LIST_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_mem.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_mem.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_mem.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_mem.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_mem.c
@@ -0,0 +1,245 @@
+/* Memory Debugging */
+#ifdef DWC_DEBUG_MEMORY
+}
+
+#endif /* DWC_DEBUG_MEMORY */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c
@@ -0,0 +1,636 @@
+/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows.
+ *
+#endif /* CONFIG_MACH_IPMATE */
+
+#endif /*DWC_CRYPTOLIB */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_modpow.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_modpow.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h
@@ -0,0 +1,34 @@
+/*
+ * dwc_modpow.h
+#endif
+
+#endif /* _LINUX_BIGNUM_H */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.c linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.c
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c
@@ -0,0 +1,319 @@
+#ifdef DWC_NOTIFYLIB
+
+}
+
+#endif /* DWC_NOTIFYLIB */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_notifier.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_notifier.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h
@@ -0,0 +1,122 @@
+
+#ifndef __DWC_NOTIFIER_H__
+#endif
+
+#endif /* __DWC_NOTIFIER_H__ */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/dwc_os.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_os.h
---- linux-3.10/drivers/usb/host/dwc_common_port/dwc_os.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/dwc_os.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_os.h
@@ -0,0 +1,1262 @@
+/* =========================================================================
+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $
+#endif
+
+#endif /* _DWC_OS_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile
---- linux-3.10/drivers/usb/host/dwc_common_port/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile
@@ -0,0 +1,58 @@
+#
+# Makefile for DWC_common library
+
+clean:
+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile.fbsd linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.fbsd
---- linux-3.10/drivers/usb/host/dwc_common_port/Makefile.fbsd 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.fbsd 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd
@@ -0,0 +1,17 @@
+CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include
+CFLAGS += -DDWC_FREEBSD
+ dwc_common_fbsd.c dwc_mem.c
+
+.include <bsd.kmod.mk>
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/Makefile.linux linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.linux
---- linux-3.10/drivers/usb/host/dwc_common_port/Makefile.linux 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/Makefile.linux 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile.linux
@@ -0,0 +1,49 @@
+#
+# Makefile for DWC_common library
+
+clean:
+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
-diff -urN linux-3.10/drivers/usb/host/dwc_common_port/usb.h linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/usb.h
---- linux-3.10/drivers/usb/host/dwc_common_port/usb.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_common_port/usb.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/usb.h
@@ -0,0 +1,946 @@
+/*
+ * Copyright (c) 1998 The NetBSD Foundation, Inc.
+#endif
+
+#endif /* _USB_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/doc/doxygen.cfg linux-rpi-3.10.y/drivers/usb/host/dwc_otg/doc/doxygen.cfg
---- linux-3.10/drivers/usb/host/dwc_otg/doc/doxygen.cfg 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/doc/doxygen.cfg 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg
@@ -0,0 +1,224 @@
+# Doxyfile 1.3.9.1
+
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+SEARCHENGINE = NO
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dummy_audio.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dummy_audio.c
---- linux-3.10/drivers/usb/host/dwc_otg/dummy_audio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dummy_audio.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dummy_audio.c
@@ -0,0 +1,1575 @@
+/*
+ * zero.c -- Gadget Zero, for USB development
+ remove_proc_entry("isoc_test", NULL);
+}
+module_exit (cleanup);
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_cfi_common.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_cfi_common.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_cfi_common.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_cfi_common.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h
@@ -0,0 +1,142 @@
+/* ==========================================================================
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+typedef struct cfi_string cfi_string_t;
+
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c
@@ -0,0 +1,854 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $
+#endif
+ return 1;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_adp.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_adp.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h
@@ -0,0 +1,80 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
+extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
+
+#endif //__DWC_OTG_ADP_H__
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c
@@ -0,0 +1,1210 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
+ device_remove_file(&dev->dev, &dev_attr_sleep_status);
+#endif
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_attr.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_attr.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h
@@ -0,0 +1,89 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
+#endif
+ );
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
@@ -0,0 +1,1876 @@
+/* ==========================================================================
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+}
+
+#endif //DWC_UTE_CFI
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cfi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cfi.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
@@ -0,0 +1,320 @@
+/* ==========================================================================
+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl);
+
+#endif /* (__DWC_OTG_CFI_H__) */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c
@@ -0,0 +1,7151 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
+ dwc_otg_pcd_start_srp_timer(core_if);
+ return;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h
@@ -0,0 +1,1464 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
+//////////////////////////////////////////////////////////////////////
+
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
@@ -0,0 +1,1571 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
+
+ return retval;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_core_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_core_if.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_core_if.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
@@ -0,0 +1,705 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
+/** @} */
+
+#endif /* __DWC_CORE_IF_H__ */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_dbg.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_dbg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_dbg.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
@@ -0,0 +1,117 @@
+/* ==========================================================================
+ *
+
+#endif /*DEBUG*/
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
@@ -0,0 +1,1732 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
+ </td></tr>
+
+*/
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_driver.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_driver.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h
@@ -0,0 +1,86 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
+#endif
+
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
@@ -0,0 +1,3533 @@
+
+/* ==========================================================================
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
@@ -0,0 +1,1132 @@
+/*==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
@@ -0,0 +1,839 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
+#endif
+#endif
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
@@ -0,0 +1,417 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
+
+#endif /* __DWC_HCD_IF_H__ */
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
@@ -0,0 +1,2258 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
+ return retval;
+}
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
@@ -0,0 +1,955 @@
+
+/* ==========================================================================
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
@@ -0,0 +1,958 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.c
@@ -0,0 +1,113 @@
+#include "dwc_otg_regs.h"
+#include "dwc_otg_dbg.h"
+
+ return;
+}
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_mphi_fix.h
@@ -0,0 +1,36 @@
+#ifndef __DWC_OTG_MPHI_FIX_H__
+#define __DWC_OTG_MPHI_FIX_H__
+#endif
+
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
@@ -0,0 +1,188 @@
+#ifndef _DWC_OS_DEP_H_
+#define _DWC_OS_DEP_H_
+
+
+#endif /* _DWC_OS_DEP_H_ */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
@@ -0,0 +1,2708 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
+}
+
+#endif /* DWC_HOST_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
@@ -0,0 +1,266 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
+extern void do_test_mode(void *data);
+#endif
+#endif /* DWC_HOST_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
@@ -0,0 +1,360 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
+#endif /* __DWC_PCD_IF_H__ */
+
+#endif /* DWC_HOST_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
@@ -0,0 +1,5147 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
+}
+
+#endif /* DWC_HOST_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
@@ -0,0 +1,1358 @@
+ /* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+#endif /* DWC_HOST_ONLY */
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_regs.h linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_regs.h
---- linux-3.10/drivers/usb/host/dwc_otg/dwc_otg_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/dwc_otg_regs.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h
@@ -0,0 +1,2550 @@
+/* ==========================================================================
+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
+} gpwrdn_data_t;
+
+#endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_otg/Makefile
---- linux-3.10/drivers/usb/host/dwc_otg/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/Makefile
@@ -0,0 +1,81 @@
+#
+# Makefile for DWC_otg Highspeed USB controller driver
+ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers
+
+endif
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
---- linux-3.10/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
@@ -0,0 +1,337 @@
+package dwc_otg_test;
+
+);
+
+1;
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/Makefile linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/Makefile
---- linux-3.10/drivers/usb/host/dwc_otg/test/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/Makefile
@@ -0,0 +1,16 @@
+
+PERL=/usr/bin/perl
+ else echo "=======> $$test, FAILED" ; \
+ fi \
+ done
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/test_mod_param.pl linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_mod_param.pl
---- linux-3.10/drivers/usb/host/dwc_otg/test/test_mod_param.pl 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_mod_param.pl 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl
@@ -0,0 +1,133 @@
+#!/usr/bin/perl -w
+#
+
+test_main();
+0;
-diff -urN linux-3.10/drivers/usb/host/dwc_otg/test/test_sysfs.pl linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_sysfs.pl
---- linux-3.10/drivers/usb/host/dwc_otg/test/test_sysfs.pl 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/dwc_otg/test/test_sysfs.pl 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl
@@ -0,0 +1,193 @@
+#!/usr/bin/perl -w
+#
+
+test_main();
+0;
-diff -urN linux-3.10/drivers/usb/host/Kconfig linux-rpi-3.10.y/drivers/usb/host/Kconfig
---- linux-3.10/drivers/usb/host/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -663,6 +663,19 @@
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -663,6 +663,19 @@ config USB_HWA_HCD
To compile this driver a module, choose M here: the module
will be called "hwa-hc".
config USB_IMX21_HCD
tristate "i.MX21 HCD support"
depends on ARM && ARCH_MXC
-diff -urN linux-3.10/drivers/usb/host/Makefile linux-rpi-3.10.y/drivers/usb/host/Makefile
---- linux-3.10/drivers/usb/host/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/host/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -47,6 +47,8 @@
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -47,6 +47,8 @@ obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
-diff -urN linux-3.10/drivers/usb/Makefile linux-rpi-3.10.y/drivers/usb/Makefile
---- linux-3.10/drivers/usb/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/usb/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -23,6 +23,7 @@
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_USB_R8A66597_HCD) += host/
obj-$(CONFIG_USB_HWA_HCD) += host/
obj-$(CONFIG_USB_ISP1760_HCD) += host/
-diff -urN linux-3.10/arch/arm/configs/bcmrpi_cutdown_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_cutdown_defconfig
---- linux-3.10/arch/arm/configs/bcmrpi_cutdown_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_cutdown_defconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/configs/bcmrpi_cutdown_defconfig
@@ -0,0 +1,504 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_BCM2708=m
+
-diff -urN linux-3.10/arch/arm/configs/bcmrpi_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_defconfig
---- linux-3.10/arch/arm/configs/bcmrpi_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_defconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/configs/bcmrpi_defconfig
@@ -0,0 +1,743 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
-diff -urN linux-3.10/arch/arm/configs/bcmrpi_emergency_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_emergency_defconfig
---- linux-3.10/arch/arm/configs/bcmrpi_emergency_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_emergency_defconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/configs/bcmrpi_emergency_defconfig
@@ -0,0 +1,532 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
-diff -urN linux-3.10/arch/arm/configs/bcmrpi_quick_defconfig linux-rpi-3.10.y/arch/arm/configs/bcmrpi_quick_defconfig
---- linux-3.10/arch/arm/configs/bcmrpi_quick_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/configs/bcmrpi_quick_defconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/configs/bcmrpi_quick_defconfig
@@ -0,0 +1,197 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_LOCALVERSION="-quick"
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
-diff -urN linux-3.10/arch/arm/include/asm/fiq.h linux-rpi-3.10.y/arch/arm/include/asm/fiq.h
---- linux-3.10/arch/arm/include/asm/fiq.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/include/asm/fiq.h 2013-07-06 15:25:50.000000000 +0100
-@@ -42,6 +42,7 @@
+--- a/arch/arm/include/asm/fiq.h
++++ b/arch/arm/include/asm/fiq.h
+@@ -42,6 +42,7 @@ extern void disable_fiq(int fiq);
/* helpers defined in fiqasm.S: */
extern void __set_fiq_regs(unsigned long const *regs);
extern void __get_fiq_regs(unsigned long *regs);
static inline void set_fiq_regs(struct pt_regs const *regs)
{
-diff -urN linux-3.10/arch/arm/Kconfig linux-rpi-3.10.y/arch/arm/Kconfig
---- linux-3.10/arch/arm/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -361,6 +361,23 @@
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -361,6 +361,23 @@ config ARCH_AT91
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
-@@ -1025,6 +1042,7 @@
+@@ -1025,6 +1042,7 @@ source "arch/arm/mach-virt/Kconfig"
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
-diff -urN linux-3.10/arch/arm/Kconfig.debug linux-rpi-3.10.y/arch/arm/Kconfig.debug
---- linux-3.10/arch/arm/Kconfig.debug 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/Kconfig.debug 2013-07-06 15:25:50.000000000 +0100
-@@ -519,6 +519,14 @@
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -519,6 +519,14 @@ choice
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
endchoice
config DEBUG_EXYNOS_UART
-diff -urN linux-3.10/arch/arm/kernel/armksyms.c linux-rpi-3.10.y/arch/arm/kernel/armksyms.c
---- linux-3.10/arch/arm/kernel/armksyms.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/kernel/armksyms.c 2013-07-06 15:25:50.000000000 +0100
-@@ -156,3 +156,7 @@
+--- a/arch/arm/kernel/armksyms.c
++++ b/arch/arm/kernel/armksyms.c
+@@ -156,3 +156,7 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
EXPORT_SYMBOL(__pv_phys_offset);
#endif
+extern void v6wbi_flush_kern_tlb_range(void);
+EXPORT_SYMBOL(v6wbi_flush_kern_tlb_range);
+
-diff -urN linux-3.10/arch/arm/kernel/fiqasm.S linux-rpi-3.10.y/arch/arm/kernel/fiqasm.S
---- linux-3.10/arch/arm/kernel/fiqasm.S 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/kernel/fiqasm.S 2013-07-06 15:25:50.000000000 +0100
+--- a/arch/arm/kernel/fiqasm.S
++++ b/arch/arm/kernel/fiqasm.S
@@ -25,6 +25,9 @@
ENTRY(__set_fiq_regs)
mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
msr cpsr_c, r2 @ select FIQ mode
mov r0, r0 @ avoid hazard prior to ARMv4
ldmia r0!, {r8 - r12}
-@@ -47,3 +50,7 @@
+@@ -47,3 +50,7 @@ ENTRY(__get_fiq_regs)
mov r0, r0 @ avoid hazard prior to ARMv4
mov pc, lr
ENDPROC(__get_fiq_regs)
+ENTRY(__FIQ_Branch)
+ mov pc, r8
+ENDPROC(__FIQ_Branch)
-diff -urN linux-3.10/arch/arm/kernel/fiq.c linux-rpi-3.10.y/arch/arm/kernel/fiq.c
---- linux-3.10/arch/arm/kernel/fiq.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/kernel/fiq.c 2013-07-06 15:25:50.000000000 +0100
-@@ -137,6 +137,7 @@
+--- a/arch/arm/kernel/fiq.c
++++ b/arch/arm/kernel/fiq.c
+@@ -137,6 +137,7 @@ void disable_fiq(int fiq)
EXPORT_SYMBOL(set_fiq_handler);
EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */
EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */
EXPORT_SYMBOL(claim_fiq);
EXPORT_SYMBOL(release_fiq);
EXPORT_SYMBOL(enable_fiq);
-diff -urN linux-3.10/arch/arm/mach-bcm2708/armctrl.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.c
---- linux-3.10/arch/arm/mach-bcm2708/armctrl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/armctrl.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/arm/mach-bcm2708/armctrl.c
+ init_FIQ(FIQ_START);
+ return 0;
+}
-diff -urN linux-3.10/arch/arm/mach-bcm2708/armctrl.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.h
---- linux-3.10/arch/arm/mach-bcm2708/armctrl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/armctrl.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/armctrl.h
@@ -0,0 +1,27 @@
+/*
+ * linux/arch/arm/mach-bcm2708/armctrl.h
+ u32 armctrl_sources, u32 resume_sources);
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.c
---- linux-3.10/arch/arm/mach-bcm2708/bcm2708.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -0,0 +1,885 @@
+/*
+ * linux/arch/arm/mach-bcm2708/bcm2708.c
+module_param(boardrev, uint, 0644);
+module_param(serial, uint, 0644);
+module_param(uart_clock, uint, 0644);
-diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708_gpio.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708_gpio.c
---- linux-3.10/arch/arm/mach-bcm2708/bcm2708_gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708_gpio.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/bcm2708_gpio.c
@@ -0,0 +1,339 @@
+/*
+ * linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
+
+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
+MODULE_LICENSE("GPL");
-diff -urN linux-3.10/arch/arm/mach-bcm2708/bcm2708.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.h
---- linux-3.10/arch/arm/mach-bcm2708/bcm2708.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/bcm2708.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/bcm2708.h
@@ -0,0 +1,51 @@
+/*
+ * linux/arch/arm/mach-bcm2708/bcm2708.h
+}
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/clock.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.c
---- linux-3.10/arch/arm/mach-bcm2708/clock.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/clock.c
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/arm/mach-bcm2708/clock.c
+ return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);
-diff -urN linux-3.10/arch/arm/mach-bcm2708/clock.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.h
---- linux-3.10/arch/arm/mach-bcm2708/clock.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/clock.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/clock.h
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/arm/mach-bcm2708/clock.h
+struct clk {
+ unsigned long rate;
+};
-diff -urN linux-3.10/arch/arm/mach-bcm2708/dma.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/dma.c
---- linux-3.10/arch/arm/mach-bcm2708/dma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/dma.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/dma.c
@@ -0,0 +1,399 @@
+/*
+ * linux/arch/arm/mach-bcm2708/dma.c
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM");
-diff -urN linux-3.10/arch/arm/mach-bcm2708/dmaer.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/dmaer.c
---- linux-3.10/arch/arm/mach-bcm2708/dmaer.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/dmaer.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/dmaer.c
@@ -0,0 +1,887 @@
+#include <linux/init.h>
+#include <linux/sched.h>
+module_init(dmaer_init);
+module_exit(dmaer_exit);
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_control.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_control.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_control.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_control.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/arm_control.h
@@ -0,0 +1,419 @@
+/*
+ * linux/arch/arm/mach-bcm2708/arm_control.h
+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_power.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_power.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/arm_power.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/arm_power.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/arm_power.h
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-bcm2708/include/mach/arm_power.h
+};
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/clkdev.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/clkdev.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/clkdev.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/clkdev.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+#define __clk_put(clk) do { } while (0)
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/debug-macro.S linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/debug-macro.S
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/debug-macro.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/debug-macro.S 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
+ *
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/dma.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/dma.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/dma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/dma.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/dma.h
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/mach-bcm2708/include/mach/dma.h
+
+
+#endif /* _MACH_BCM2708_DMA_H */
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/entry-macro.S linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/entry-macro.S
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/entry-macro.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/entry-macro.S 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/entry-macro.S
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
+1020: @ EQ will be set if no irqs pending
+
+ .endm
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/frc.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/frc.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/frc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/frc.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/frc.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/timex.h
+extern unsigned long long frc_clock_ticks63(void);
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/gpio.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/gpio.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/gpio.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/gpio.h
+
+#endif
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/hardware.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/hardware.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/hardware.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/hardware.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/hardware.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/hardware.h
+#include <mach/platform.h>
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/io.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/io.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/io.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/io.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/io.h
+#define __io(a) __typesafe_io(a)
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/irqs.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/irqs.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/irqs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/irqs.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/irqs.h
@@ -0,0 +1,199 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/irqs.h
+
+
+#endif /* _BCM2708_IRQS_H_ */
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/memory.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/memory.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/memory.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/memory.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/memory.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/memory.h
+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET))
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/platform.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/platform.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/platform.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/platform.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/platform.h
@@ -0,0 +1,226 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/platform.h
+#endif
+
+/* END */
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/power.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/power.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/power.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/power.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/power.h
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/arm/mach-bcm2708/power.h
+extern int bcm_power_close(BCM_POWER_HANDLE_T handle);
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/system.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/system.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/system.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/system.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/system.h
+}
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/timex.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/timex.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/timex.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/timex.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE (1000000)
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/uncompress.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/uncompress.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/uncompress.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/uncompress.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-bcn2708/include/mach/uncompress.h
+ */
+#define arch_decomp_wdog()
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vcio.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vcio.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/vcio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vcio.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/vcio.h
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/vcio.h
+#define DEVICE_FILE_NAME "char_dev"
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_mem.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_mem.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_mem.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_mem.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/vc_mem.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved.
+
+#endif /* VC_MEM_H */
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_support.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_support.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/vc_support.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vc_support.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/vc_support.h
@@ -0,0 +1,69 @@
+#ifndef _VC_SUPPORT_H_
+#define _VC_SUPPORT_H_
+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5);
+
+#endif
-diff -urN linux-3.10/arch/arm/mach-bcm2708/include/mach/vmalloc.h linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vmalloc.h
---- linux-3.10/arch/arm/mach-bcm2708/include/mach/vmalloc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/include/mach/vmalloc.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END (0xe8000000)
-diff -urN linux-3.10/arch/arm/mach-bcm2708/Kconfig linux-rpi-3.10.y/arch/arm/mach-bcm2708/Kconfig
---- linux-3.10/arch/arm/mach-bcm2708/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Kconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/Kconfig
@@ -0,0 +1,48 @@
+menu "Broadcom BCM2708 Implementations"
+ depends on ARCH_BCM2708
+ help
+ Binds spidev driver to the SPI0 master
+endmenu
-diff -urN linux-3.10/arch/arm/mach-bcm2708/Makefile linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile
---- linux-3.10/arch/arm/mach-bcm2708/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+obj-$(CONFIG_BCM2708_DMAER) += dmaer_master.o
+dmaer_master-objs := dmaer.o vc_support.o
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/Makefile.boot linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile.boot
---- linux-3.10/arch/arm/mach-bcm2708/Makefile.boot 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/Makefile.boot 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
-diff -urN linux-3.10/arch/arm/mach-bcm2708/power.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/power.c
---- linux-3.10/arch/arm/mach-bcm2708/power.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/power.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/power.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/arm/mach-bcm2708/power.c
+MODULE_AUTHOR("Phil Elwell");
+MODULE_DESCRIPTION("Interface to BCM2708 power management");
+MODULE_LICENSE("GPL");
-diff -urN linux-3.10/arch/arm/mach-bcm2708/vcio.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vcio.c
---- linux-3.10/arch/arm/mach-bcm2708/vcio.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vcio.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/vcio.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-bcm2708/vcio.c
+MODULE_DESCRIPTION("ARM I/O to VideoCore processor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bcm-mbox");
-diff -urN linux-3.10/arch/arm/mach-bcm2708/vc_mem.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_mem.c
---- linux-3.10/arch/arm/mach-bcm2708/vc_mem.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_mem.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/vc_mem.c
@@ -0,0 +1,462 @@
+/*****************************************************************************
+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved.
+module_param(mem_size, uint, 0644);
+module_param(mem_base, uint, 0644);
+
-diff -urN linux-3.10/arch/arm/mach-bcm2708/vc_support.c linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_support.c
---- linux-3.10/arch/arm/mach-bcm2708/vc_support.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mach-bcm2708/vc_support.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/arch/arm/mach-bcm2708/vc_support.c
@@ -0,0 +1,319 @@
+/*
+ * vc_support.c
+ }
+}
+
-diff -urN linux-3.10/arch/arm/Makefile linux-rpi-3.10.y/arch/arm/Makefile
---- linux-3.10/arch/arm/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -139,6 +139,7 @@
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -144,6 +144,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x0020
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
-diff -urN linux-3.10/arch/arm/mm/Kconfig linux-rpi-3.10.y/arch/arm/mm/Kconfig
---- linux-3.10/arch/arm/mm/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mm/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -358,7 +358,7 @@
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -358,7 +358,7 @@ config CPU_PJ4B
# ARMv6
config CPU_V6
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
-diff -urN linux-3.10/arch/arm/mm/proc-v6.S linux-rpi-3.10.y/arch/arm/mm/proc-v6.S
---- linux-3.10/arch/arm/mm/proc-v6.S 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/mm/proc-v6.S 2013-07-06 15:25:50.000000000 +0100
-@@ -73,10 +73,19 @@
+--- a/arch/arm/mm/proc-v6.S
++++ b/arch/arm/mm/proc-v6.S
+@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset)
*
* IRQs are already disabled.
*/
mov pc, lr
ENTRY(cpu_v6_dcache_clean_area)
-diff -urN linux-3.10/arch/arm/tools/mach-types linux-rpi-3.10.y/arch/arm/tools/mach-types
---- linux-3.10/arch/arm/tools/mach-types 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/arch/arm/tools/mach-types 2013-07-06 15:25:50.000000000 +0100
-@@ -522,6 +522,7 @@
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -522,6 +522,7 @@ torbreck MACH_TORBRECK TORBRECK 3090
prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
paz00 MACH_PAZ00 PAZ00 3128
acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
-diff -urN linux-3.10/drivers/watchdog/bcm2708_wdog.c linux-rpi-3.10.y/drivers/watchdog/bcm2708_wdog.c
---- linux-3.10/drivers/watchdog/bcm2708_wdog.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/watchdog/bcm2708_wdog.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/watchdog/bcm2708_wdog.c
@@ -0,0 +1,385 @@
+/*
+ * Broadcom BCM2708 watchdog driver.
+MODULE_ALIAS_MISCDEV(TEMP_MINOR);
+MODULE_LICENSE("GPL");
+
-diff -urN linux-3.10/drivers/watchdog/Kconfig linux-rpi-3.10.y/drivers/watchdog/Kconfig
---- linux-3.10/drivers/watchdog/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/watchdog/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -391,6 +391,12 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -391,6 +391,12 @@ config RETU_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called retu_wdt.
# AVR32 Architecture
config AT32AP700X_WDT
-diff -urN linux-3.10/drivers/watchdog/Makefile linux-rpi-3.10.y/drivers/watchdog/Makefile
---- linux-3.10/drivers/watchdog/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/watchdog/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -54,6 +54,7 @@
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
-diff -urN linux-3.10/drivers/video/bcm2708_fb.c linux-rpi-3.10.y/drivers/video/bcm2708_fb.c
---- linux-3.10/drivers/video/bcm2708_fb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/bcm2708_fb.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/video/bcm2708_fb.c
@@ -0,0 +1,647 @@
+/*
+ * linux/drivers/video/bcm2708_fb.c
+MODULE_PARM_DESC(fbwidth, "Width of ARM Framebuffer");
+MODULE_PARM_DESC(fbheight, "Height of ARM Framebuffer");
+MODULE_PARM_DESC(fbdepth, "Bit depth of ARM Framebuffer");
-diff -urN linux-3.10/drivers/video/cfbimgblt.c linux-rpi-3.10.y/drivers/video/cfbimgblt.c
---- linux-3.10/drivers/video/cfbimgblt.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/cfbimgblt.c 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/video/cfbimgblt.c
++++ b/drivers/video/cfbimgblt.c
@@ -28,6 +28,11 @@
*
* Also need to add code to deal with cards endians that are different than
*/
#include <linux/module.h>
#include <linux/string.h>
-@@ -262,6 +267,133 @@
+@@ -262,6 +267,133 @@ static inline void fast_imageblit(const
}
}
void cfb_imageblit(struct fb_info *p, const struct fb_image *image)
{
u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0;
-@@ -294,11 +426,21 @@
+@@ -294,11 +426,21 @@ void cfb_imageblit(struct fb_info *p, co
bgcolor = image->bg_color;
}
slow_imageblit(image, p, dst1, fgcolor, bgcolor,
start_index, pitch_index);
} else
-diff -urN linux-3.10/drivers/video/fbmem.c linux-rpi-3.10.y/drivers/video/fbmem.c
---- linux-3.10/drivers/video/fbmem.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/fbmem.c 2013-07-06 15:25:50.000000000 +0100
-@@ -1074,6 +1074,25 @@
+--- a/drivers/video/fbmem.c
++++ b/drivers/video/fbmem.c
+@@ -1074,6 +1074,25 @@ fb_blank(struct fb_info *info, int blank
return ret;
}
static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
-@@ -1084,6 +1103,7 @@
+@@ -1084,6 +1103,7 @@ static long do_fb_ioctl(struct fb_info *
struct fb_cmap cmap_from;
struct fb_cmap_user cmap;
struct fb_event event;
void __user *argp = (void __user *)arg;
long ret = 0;
-@@ -1193,6 +1213,15 @@
+@@ -1193,6 +1213,15 @@ static long do_fb_ioctl(struct fb_info *
console_unlock();
unlock_fb_info(info);
break;
default:
if (!lock_fb_info(info))
return -ENODEV;
-@@ -1345,6 +1374,7 @@
+@@ -1345,6 +1374,7 @@ static long fb_compat_ioctl(struct file
case FBIOPAN_DISPLAY:
case FBIOGET_CON2FBMAP:
case FBIOPUT_CON2FBMAP:
arg = (unsigned long) compat_ptr(arg);
case FBIOBLANK:
ret = do_fb_ioctl(info, cmd, arg);
-diff -urN linux-3.10/drivers/video/Kconfig linux-rpi-3.10.y/drivers/video/Kconfig
---- linux-3.10/drivers/video/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -310,6 +310,20 @@
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -310,6 +310,20 @@ config FB_PM2_FIFO_DISCONNECT
help
Support the Permedia2 FIFO disconnect feature.
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
depends on FB && ARM && ARM_AMBA
-diff -urN linux-3.10/drivers/video/logo/logo_linux_clut224.ppm linux-rpi-3.10.y/drivers/video/logo/logo_linux_clut224.ppm
---- linux-3.10/drivers/video/logo/logo_linux_clut224.ppm 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/logo/logo_linux_clut224.ppm 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/video/logo/logo_linux_clut224.ppm
++++ b/drivers/video/logo/logo_linux_clut224.ppm
@@ -1,1604 +1,883 @@
P3
-# Standard 224-color Linux logo
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0
-diff -urN linux-3.10/drivers/video/Makefile linux-rpi-3.10.y/drivers/video/Makefile
---- linux-3.10/drivers/video/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/video/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -100,6 +100,7 @@
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -100,6 +100,7 @@ obj-$(CONFIG_FB_PVR2) += pvr
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
-diff -urN linux-3.10/include/uapi/linux/fb.h linux-rpi-3.10.y/include/uapi/linux/fb.h
---- linux-3.10/include/uapi/linux/fb.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/include/uapi/linux/fb.h 2013-07-06 15:25:50.000000000 +0100
+--- a/include/uapi/linux/fb.h
++++ b/include/uapi/linux/fb.h
@@ -34,6 +34,11 @@
#define FBIOPUT_MODEINFO 0x4617
#define FBIOGET_DISPINFO 0x4618
-diff -urN linux-3.10/drivers/char/broadcom/Kconfig linux-rpi-3.10.y/drivers/char/broadcom/Kconfig
---- linux-3.10/drivers/char/broadcom/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/broadcom/Kconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/char/broadcom/Kconfig
@@ -0,0 +1,17 @@
+#
+# Broadcom char driver config
+ help
+ Helper for videocore CMA access.
+
-diff -urN linux-3.10/drivers/char/broadcom/Makefile linux-rpi-3.10.y/drivers/char/broadcom/Makefile
---- linux-3.10/drivers/char/broadcom/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/broadcom/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/char/broadcom/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_BCM_VC_CMA) += vc_cma/
+
-diff -urN linux-3.10/drivers/char/broadcom/vc_cma/Makefile linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/Makefile
---- linux-3.10/drivers/char/broadcom/vc_cma/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/char/broadcom/vc_cma/Makefile
@@ -0,0 +1,15 @@
+EXTRA_CFLAGS += -Wall -Wstrict-prototypes -Wno-trigraphs
+EXTRA_CFLAGS += -Werror
+
+vc-cma-objs := vc_cma.o
+
-diff -urN linux-3.10/drivers/char/broadcom/vc_cma/vc_cma.c linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/vc_cma.c
---- linux-3.10/drivers/char/broadcom/vc_cma/vc_cma.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/broadcom/vc_cma/vc_cma.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/char/broadcom/vc_cma/vc_cma.c
@@ -0,0 +1,1145 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+module_exit(vc_cma_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
---- linux-3.10/drivers/char/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -62,3 +62,6 @@
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -62,3 +62,6 @@ obj-$(CONFIG_JS_RTC) += js-rtc.o
js-rtc-y = rtc.o
obj-$(CONFIG_TILE_SROM) += tile-srom.o
+
+obj-$(CONFIG_BRCM_CHAR_DRIVERS) += broadcom/
+
---- linux-3.10/drivers/char/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -586,6 +586,8 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -586,6 +586,8 @@ config DEVPORT
source "drivers/s390/char/Kconfig"
config MSM_SMD_PKT
bool "Enable device interface for some SMD packet ports"
default n
-diff -urN linux-3.10/drivers/misc/Kconfig linux-rpi-3.10.y/drivers/misc/Kconfig
---- linux-3.10/drivers/misc/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -536,4 +536,6 @@
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -536,4 +536,6 @@ source "drivers/misc/carma/Kconfig"
source "drivers/misc/altera-stapl/Kconfig"
source "drivers/misc/mei/Kconfig"
source "drivers/misc/vmw_vmci/Kconfig"
+source "drivers/misc/vc04_services/Kconfig"
endmenu
+
-diff -urN linux-3.10/drivers/misc/Makefile linux-rpi-3.10.y/drivers/misc/Makefile
---- linux-3.10/drivers/misc/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -53,3 +53,4 @@
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -53,3 +53,4 @@ obj-$(CONFIG_INTEL_MEI) += mei/
obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/
obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
obj-$(CONFIG_SRAM) += sram.o
+obj-$(CONFIG_BCM2708_VCHIQ) += vc04_services/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/connections/connection.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/connections/connection.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/connections/connection.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/connections/connection.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/connections/connection.h
@@ -0,0 +1,328 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#endif /* CONNECTION_H_ */
+
+/****************************** End of file **********************************/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/message_drivers/message.h
@@ -0,0 +1,204 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#endif // _VCHI_MESSAGE_H_
+
+/****************************** End of file ***********************************/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/vchi_cfg.h
@@ -0,0 +1,224 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#endif /* VCHI_CFG_H_ */
+
+/****************************** End of file **********************************/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/vchi_cfg_internal.h
@@ -0,0 +1,71 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+//#define VCHI_RX_NANOLOCKS
+
+#endif /*VCHI_CFG_INTERNAL_H_*/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_common.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_common.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_common.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_common.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/vchi_common.h
@@ -0,0 +1,163 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+
+#endif // VCHI_COMMON_H_
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/vchi.h
@@ -0,0 +1,373 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#endif /* VCHI_H_ */
+
+/****************************** End of file **********************************/
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_mh.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_mh.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchi/vchi_mh.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchi/vchi_mh.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchi/vchi_mh.h
@@ -0,0 +1,42 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#define VCHI_MEM_HANDLE_INVALID 0
+
+#endif
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -0,0 +1,538 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+ kfree(pagelist);
+}
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_2835.h
@@ -0,0 +1,42 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#define VCHIQ_PLATFORM_FRAGMENTS_COUNT_IDX 1
+
+#endif /* VCHIQ_2835_H */
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -0,0 +1,2806 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+module_exit(vchiq_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.h
@@ -0,0 +1,212 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+
+#endif /* VCHIQ_ARM_H */
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_build_info.h
@@ -0,0 +1,37 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+const char *vchiq_get_build_version(void);
+const char *vchiq_get_build_time(void);
+const char *vchiq_get_build_date(void);
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_cfg.h
@@ -0,0 +1,60 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#endif
+
+#endif /* VCHIQ_CFG_H */
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.c
@@ -0,0 +1,119 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ mutex_unlock(&g_connected_mutex);
+}
+EXPORT_SYMBOL(vchiq_add_connected_callback);
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_connected.h
@@ -0,0 +1,51 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+#endif /* VCHIQ_CONNECTED_H */
+
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -0,0 +1,3818 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ numBytes = 0;
+ }
+}
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_core.h
@@ -0,0 +1,703 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ size_t numBytes);
+
+#endif
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_genversion
@@ -0,0 +1,89 @@
+#!/usr/bin/perl -w
+
+EOF
+
+
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq.h
@@ -0,0 +1,41 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+#endif
+
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_if.h
@@ -0,0 +1,188 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ short *peer_version);
+
+#endif /* VCHIQ_IF_H */
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_ioctl.h
@@ -0,0 +1,129 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+#define VCHIQ_IOC_MAX 15
+
+#endif
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_kern_lib.c
@@ -0,0 +1,454 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+ return status;
+}
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_memdrv.h
@@ -0,0 +1,71 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ const VCHIQ_PLATFORM_DATA_T * platform_data);
+
+#endif
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_pagelist.h
@@ -0,0 +1,58 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+} FRAGMENTS_T;
+
+#endif /* VCHIQ_PAGELIST_H */
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_proc.c
@@ -0,0 +1,243 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ return proc_info.clients;
+}
+
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_shim.c
@@ -0,0 +1,815 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+ return ret;
+}
+EXPORT_SYMBOL(vchi_service_release);
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.c
@@ -0,0 +1,120 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+ return header;
+}
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_util.h
@@ -0,0 +1,82 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+#endif
+
-diff -urN linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c
---- linux-3.10/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/interface/vchiq_arm/vchiq_version.c
@@ -0,0 +1,59 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+{
+ return vchiq_build_time;
+}
-diff -urN linux-3.10/drivers/misc/vc04_services/Kconfig linux-rpi-3.10.y/drivers/misc/vc04_services/Kconfig
---- linux-3.10/drivers/misc/vc04_services/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/Kconfig 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/Kconfig
@@ -0,0 +1,10 @@
+config BCM2708_VCHIQ
+ tristate "Videocore VCHIQ"
+ Defaults to Y when the Broadcom Videocore services
+ are included in the build, N otherwise.
+
-diff -urN linux-3.10/drivers/misc/vc04_services/Makefile linux-rpi-3.10.y/drivers/misc/vc04_services/Makefile
---- linux-3.10/drivers/misc/vc04_services/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/misc/vc04_services/Makefile 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/misc/vc04_services/Makefile
@@ -0,0 +1,18 @@
+ifeq ($(CONFIG_MACH_BCM2708),y)
+
+
+endif
+
-diff -urN linux-3.10/include/linux/broadcom/vc_cma.h linux-rpi-3.10.y/include/linux/broadcom/vc_cma.h
---- linux-3.10/include/linux/broadcom/vc_cma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/include/linux/broadcom/vc_cma.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/include/linux/broadcom/vc_cma.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2012 Broadcom Corporation. All rights reserved.
-diff -urN linux-3.10/drivers/net/usb/smsc95xx.c linux-rpi-3.10.y/drivers/net/usb/smsc95xx.c
---- linux-3.10/drivers/net/usb/smsc95xx.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/net/usb/smsc95xx.c 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/net/usb/smsc95xx.c
++++ b/drivers/net/usb/smsc95xx.c
@@ -61,6 +61,7 @@
#define SUSPEND_SUSPEND3 (0x08)
#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
struct smsc95xx_priv {
u32 mac_cr;
-@@ -76,6 +77,10 @@
+@@ -76,6 +77,10 @@ static bool turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
u32 *data, int in_pm)
{
-@@ -765,8 +770,59 @@
+@@ -765,8 +770,59 @@ static int smsc95xx_ioctl(struct net_dev
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
-diff -urN linux-3.10/drivers/char/hw_random/bcm2708-rng.c linux-rpi-3.10.y/drivers/char/hw_random/bcm2708-rng.c
---- linux-3.10/drivers/char/hw_random/bcm2708-rng.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/hw_random/bcm2708-rng.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/char/hw_random/bcm2708-rng.c
@@ -0,0 +1,117 @@
+/**
+ * Copyright (c) 2010-2012 Broadcom. All rights reserved.
+
+MODULE_DESCRIPTION("BCM2708 H/W Random Number Generator (RNG) driver");
+MODULE_LICENSE("GPL and additional rights");
-diff -urN linux-3.10/drivers/char/hw_random/Kconfig linux-rpi-3.10.y/drivers/char/hw_random/Kconfig
---- linux-3.10/drivers/char/hw_random/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/hw_random/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -314,3 +314,15 @@
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -314,3 +314,15 @@ config HW_RANDOM_TPM
module will be called tpm-rng.
If unsure, say Y.
+
+ If unsure, say N.
+
-diff -urN linux-3.10/drivers/char/hw_random/Makefile linux-rpi-3.10.y/drivers/char/hw_random/Makefile
---- linux-3.10/drivers/char/hw_random/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/char/hw_random/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -27,3 +27,4 @@
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -27,3 +27,4 @@ obj-$(CONFIG_HW_RANDOM_PSERIES) += pseri
obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o
obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
-diff -urN linux-3.10/drivers/staging/media/lirc/Kconfig linux-rpi-3.10.y/drivers/staging/media/lirc/Kconfig
---- linux-3.10/drivers/staging/media/lirc/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/staging/media/lirc/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -38,6 +38,12 @@
+--- a/drivers/staging/media/lirc/Kconfig
++++ b/drivers/staging/media/lirc/Kconfig
+@@ -38,6 +38,12 @@ config LIRC_PARALLEL
help
Driver for Homebrew Parallel Port Receivers
config LIRC_SASEM
tristate "Sasem USB IR Remote"
depends on LIRC && USB
-diff -urN linux-3.10/drivers/staging/media/lirc/lirc_rpi.c linux-rpi-3.10.y/drivers/staging/media/lirc/lirc_rpi.c
---- linux-3.10/drivers/staging/media/lirc/lirc_rpi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/staging/media/lirc/lirc_rpi.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/staging/media/lirc/lirc_rpi.c
@@ -0,0 +1,692 @@
+/*
+ * lirc_rpi.c
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
-diff -urN linux-3.10/drivers/staging/media/lirc/Makefile linux-rpi-3.10.y/drivers/staging/media/lirc/Makefile
---- linux-3.10/drivers/staging/media/lirc/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/staging/media/lirc/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -7,6 +7,7 @@
+--- a/drivers/staging/media/lirc/Makefile
++++ b/drivers/staging/media/lirc/Makefile
+@@ -7,6 +7,7 @@ obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o
obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o
-diff -urN linux-3.10/drivers/spi/Kconfig linux-rpi-3.10.y/drivers/spi/Kconfig
---- linux-3.10/drivers/spi/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/spi/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -86,6 +86,14 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -86,6 +86,14 @@ config SPI_BCM2835
is for the regular SPI controller. Slave mode operation is not also
not supported.
config SPI_BFIN5XX
tristate "SPI controller driver for ADI Blackfin5xx"
depends on BLACKFIN
-diff -urN linux-3.10/drivers/spi/Makefile linux-rpi-3.10.y/drivers/spi/Makefile
---- linux-3.10/drivers/spi/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/spi/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -17,6 +17,7 @@
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_AU1550) += spi-au1550.
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
-diff -urN linux-3.10/drivers/spi/spi-bcm2708.c linux-rpi-3.10.y/drivers/spi/spi-bcm2708.c
---- linux-3.10/drivers/spi/spi-bcm2708.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/spi/spi-bcm2708.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/spi/spi-bcm2708.c
@@ -0,0 +1,626 @@
+/*
+ * Driver for Broadcom BCM2708 SPI Controllers
-diff -urN linux-3.10/drivers/thermal/bcm2835-thermal.c linux-rpi-3.10.y/drivers/thermal/bcm2835-thermal.c
---- linux-3.10/drivers/thermal/bcm2835-thermal.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/thermal/bcm2835-thermal.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/thermal/bcm2835-thermal.c
@@ -0,0 +1,184 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
+
+module_platform_driver(bcm2835_thermal_driver);
-diff -urN linux-3.10/drivers/thermal/Kconfig linux-rpi-3.10.y/drivers/thermal/Kconfig
---- linux-3.10/drivers/thermal/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/thermal/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -169,4 +169,11 @@
+--- a/drivers/thermal/Kconfig
++++ b/drivers/thermal/Kconfig
+@@ -169,4 +169,11 @@ config INTEL_POWERCLAMP
enforce idle time which results in more package C-state residency. The
user interface is exposed via generic thermal framework.
+
endif
+
-diff -urN linux-3.10/drivers/thermal/Makefile linux-rpi-3.10.y/drivers/thermal/Makefile
---- linux-3.10/drivers/thermal/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/thermal/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -23,4 +23,5 @@
+--- a/drivers/thermal/Makefile
++++ b/drivers/thermal/Makefile
+@@ -23,4 +23,5 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_t
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
-diff -urN linux-3.10/drivers/cpufreq/bcm2835-cpufreq.c linux-rpi-3.10.y/drivers/cpufreq/bcm2835-cpufreq.c
---- linux-3.10/drivers/cpufreq/bcm2835-cpufreq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/cpufreq/bcm2835-cpufreq.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/cpufreq/bcm2835-cpufreq.c
@@ -0,0 +1,239 @@
+/*****************************************************************************\r
+* Copyright 2011 Broadcom Corporation. All rights reserved.\r
+module_init(bcm2835_cpufreq_module_init);\r
+module_exit(bcm2835_cpufreq_module_exit);\r
+\r
-diff -urN linux-3.10/drivers/cpufreq/Kconfig.arm linux-rpi-3.10.y/drivers/cpufreq/Kconfig.arm
---- linux-3.10/drivers/cpufreq/Kconfig.arm 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/cpufreq/Kconfig.arm 2013-07-06 15:25:50.000000000 +0100
-@@ -150,3 +150,11 @@
+--- a/drivers/cpufreq/Kconfig.arm
++++ b/drivers/cpufreq/Kconfig.arm
+@@ -150,3 +150,11 @@ config ARM_SPEAR_CPUFREQ
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
+ This adds the CPUFreq driver for BCM2835
+
+ If in doubt, say N.
-diff -urN linux-3.10/drivers/cpufreq/Makefile linux-rpi-3.10.y/drivers/cpufreq/Makefile
---- linux-3.10/drivers/cpufreq/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/cpufreq/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -72,6 +72,7 @@
+--- a/drivers/cpufreq/Makefile
++++ b/drivers/cpufreq/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa11
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra-cpufreq.o
-diff -urN linux-3.10/sound/arm/bcm2835.c linux-rpi-3.10.y/sound/arm/bcm2835.c
---- linux-3.10/sound/arm/bcm2835.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/bcm2835.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/bcm2835.c
@@ -0,0 +1,413 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bcm2835_alsa");
-diff -urN linux-3.10/sound/arm/bcm2835-ctl.c linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c
---- linux-3.10/sound/arm/bcm2835-ctl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/bcm2835-ctl.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/bcm2835-ctl.c
@@ -0,0 +1,200 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+ }
+ return 0;
+}
-diff -urN linux-3.10/sound/arm/bcm2835.h linux-rpi-3.10.y/sound/arm/bcm2835.h
---- linux-3.10/sound/arm/bcm2835.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/bcm2835.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/bcm2835.h
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+void bcm2835_audio_flush_playback_buffers(bcm2835_alsa_stream_t * alsa_stream);
+
+#endif /* __SOUND_ARM_BCM2835_H */
-diff -urN linux-3.10/sound/arm/bcm2835-pcm.c linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c
---- linux-3.10/sound/arm/bcm2835-pcm.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/bcm2835-pcm.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/bcm2835-pcm.c
@@ -0,0 +1,426 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+
+ return 0;
+}
-diff -urN linux-3.10/sound/arm/bcm2835-vchiq.c linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c
---- linux-3.10/sound/arm/bcm2835-vchiq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/bcm2835-vchiq.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/bcm2835-vchiq.c
@@ -0,0 +1,879 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+
+module_param(force_bulk, bool, 0444);
+MODULE_PARM_DESC(force_bulk, "Force use of vchiq bulk for audio");
-diff -urN linux-3.10/sound/arm/Kconfig linux-rpi-3.10.y/sound/arm/Kconfig
---- linux-3.10/sound/arm/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -39,5 +39,12 @@
+--- a/sound/arm/Kconfig
++++ b/sound/arm/Kconfig
+@@ -39,5 +39,12 @@ config SND_PXA2XX_AC97
Say Y or M if you want to support any AC97 codec attached to
the PXA2xx AC97 interface.
+
endif # SND_ARM
-diff -urN linux-3.10/sound/arm/Makefile linux-rpi-3.10.y/sound/arm/Makefile
---- linux-3.10/sound/arm/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -14,3 +14,9 @@
+--- a/sound/arm/Makefile
++++ b/sound/arm/Makefile
+@@ -14,3 +14,9 @@ snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_A
obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o
snd-pxa2xx-ac97-objs := pxa2xx-ac97.o
+
+EXTRA_CFLAGS += -Idrivers/misc/vc04_services -Idrivers/misc/vc04_services/interface/vcos/linuxkernel -D__VCCOREVER__=0x04000000
+
-diff -urN linux-3.10/sound/arm/vc_vchi_audioserv_defs.h linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h
---- linux-3.10/sound/arm/vc_vchi_audioserv_defs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/sound/arm/vc_vchi_audioserv_defs.h 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/sound/arm/vc_vchi_audioserv_defs.h
@@ -0,0 +1,116 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
-Index: linux-3.10/drivers/hwmon/bcm2835-hwmon.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.10/drivers/hwmon/bcm2835-hwmon.c 2013-07-09 20:25:51.309324091 +0100
+--- /dev/null
++++ b/drivers/hwmon/bcm2835-hwmon.c
@@ -0,0 +1,219 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation. All rights reserved.
+MODULE_DESCRIPTION("HW Monitor driver for bcm2835 chip");
+
+module_platform_driver(bcm2835_hwmon_driver);
-Index: linux-3.10/drivers/hwmon/Kconfig
-===================================================================
---- linux-3.10.orig/drivers/hwmon/Kconfig 2013-07-09 20:25:51.321324159 +0100
-+++ linux-3.10/drivers/hwmon/Kconfig 2013-07-09 20:25:51.313324108 +0100
-@@ -1537,6 +1537,16 @@
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -1537,6 +1537,16 @@ config SENSORS_MC13783_ADC
help
Support for the A/D converter on MC13783 and MC13892 PMIC.
if ACPI
comment "ACPI drivers"
-Index: linux-3.10/drivers/hwmon/Makefile
-===================================================================
---- linux-3.10.orig/drivers/hwmon/Makefile 2013-07-09 20:25:51.321324159 +0100
-+++ linux-3.10/drivers/hwmon/Makefile 2013-07-09 20:26:07.361403698 +0100
-@@ -141,6 +141,7 @@
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_W83L786NG) += w83l7
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
obj-$(CONFIG_SENSORS_GSC) += gsc.o
-diff -urwN linux-3.10/drivers/mmc/card/block.c linux-rpi-3.10.y/drivers/mmc/card/block.c
---- linux-3.10/drivers/mmc/card/block.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/card/block.c 2013-07-06 15:25:50.000000000 +0100
-@@ -1294,7 +1294,7 @@
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -1294,7 +1294,7 @@ static void mmc_blk_rw_rq_prep(struct mm
brq->data.blocks = 1;
}
/* SPI multiblock writes terminate using a special
* token, not a STOP_TRANSMISSION request.
*/
-diff -urwN linux-3.10/drivers/mmc/core/sd.c linux-rpi-3.10.y/drivers/mmc/core/sd.c
---- linux-3.10/drivers/mmc/core/sd.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/core/sd.c 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/mmc/core/sd.c
++++ b/drivers/mmc/core/sd.c
@@ -13,6 +13,8 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
-@@ -58,6 +60,15 @@
+@@ -58,6 +60,15 @@ static const unsigned int tacc_mant[] =
__res & __mask; \
})
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
-@@ -210,12 +221,62 @@
+@@ -210,12 +221,62 @@ static int mmc_decode_scr(struct mmc_car
}
/*
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
-@@ -228,14 +289,40 @@
+@@ -228,14 +289,40 @@ static int mmc_read_ssr(struct mmc_card
if (!ssr)
return -ENOMEM;
for (i = 0; i < 16; i++)
ssr[i] = be32_to_cpu(ssr[i]);
-@@ -808,13 +895,9 @@
+@@ -808,13 +895,9 @@ int mmc_sd_setup_card(struct mmc_host *h
if (!reinit) {
/*
if (err)
return err;
-diff -urwN linux-3.10/drivers/mmc/host/Kconfig linux-rpi-3.10.y/drivers/mmc/host/Kconfig
---- linux-3.10/drivers/mmc/host/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/host/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -249,6 +249,27 @@
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -249,6 +249,27 @@ config MMC_SDHCI_S3C_DMA
YMMV.
config MMC_SDHCI_BCM2835
tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
depends on ARCH_BCM2835
-diff -urwN linux-3.10/drivers/mmc/host/Makefile linux-rpi-3.10.y/drivers/mmc/host/Makefile
---- linux-3.10/drivers/mmc/host/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/host/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -15,6 +15,7 @@
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-p
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
-diff -urwN linux-3.10/drivers/mmc/host/sdhci-bcm2708.c linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c
---- linux-3.10/drivers/mmc/host/sdhci-bcm2708.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/mmc/host/sdhci-bcm2708.c
@@ -0,0 +1,1420 @@
+/*
+ * sdhci-bcm2708.c Support for SDHCI device on BCM2708
+MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages");
+
+
-diff -urwN linux-3.10/drivers/mmc/host/sdhci.c linux-rpi-3.10.y/drivers/mmc/host/sdhci.c
---- linux-3.10/drivers/mmc/host/sdhci.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.c 2013-07-06 15:25:50.000000000 +0100
+--- a/drivers/mmc/host/sdhci.c
++++ b/drivers/mmc/host/sdhci.c
@@ -28,6 +28,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
#include "sdhci.h"
-@@ -123,6 +124,91 @@
+@@ -123,6 +124,91 @@ static void sdhci_dumpregs(struct sdhci_
* Low level functions *
* *
\*****************************************************************************/
static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
{
-@@ -288,7 +374,7 @@
+@@ -288,7 +374,7 @@ static void sdhci_led_control(struct led
struct sdhci_host *host = container_of(led, struct sdhci_host, led);
unsigned long flags;
if (host->runtime_suspended)
goto out;
-@@ -298,7 +384,7 @@
+@@ -298,7 +384,7 @@ static void sdhci_led_control(struct led
else
sdhci_activate_led(host);
out:
}
#endif
-@@ -315,7 +401,7 @@
+@@ -315,7 +401,7 @@ static void sdhci_read_block_pio(struct
u32 uninitialized_var(scratch);
u8 *buf;
blksize = host->data->blksz;
chunk = 0;
-@@ -360,7 +446,7 @@
+@@ -360,7 +446,7 @@ static void sdhci_write_block_pio(struct
u32 scratch;
u8 *buf;
blksize = host->data->blksz;
chunk = 0;
-@@ -399,19 +485,28 @@
+@@ -399,19 +485,28 @@ static void sdhci_write_block_pio(struct
local_irq_restore(flags);
}
/*
* Some controllers (JMicron JMB38x) mess up the buffer bits
-@@ -422,7 +517,7 @@
+@@ -422,7 +517,7 @@ static void sdhci_transfer_pio(struct sd
(host->data->blocks == 1))
mask = ~0;
if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
udelay(100);
-@@ -434,9 +529,11 @@
+@@ -434,9 +529,11 @@ static void sdhci_transfer_pio(struct sd
host->blocks--;
if (host->blocks == 0)
break;
}
static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
-@@ -709,7 +806,9 @@
+@@ -709,7 +806,9 @@ static void sdhci_set_transfer_irqs(stru
u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
else
sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
-@@ -741,44 +840,25 @@
+@@ -741,44 +840,25 @@ static void sdhci_prepare_data(struct sd
host->data_early = 0;
host->data->bytes_xfered = 0;
int broken, i;
struct scatterlist *sg;
-@@ -837,7 +917,8 @@
+@@ -837,7 +917,8 @@ static void sdhci_prepare_data(struct sd
*/
WARN_ON(1);
host->flags &= ~SDHCI_REQ_USE_DMA;
WARN_ON(sg_cnt != 1);
sdhci_writel(host, sg_dma_address(data->sg),
SDHCI_DMA_ADDRESS);
-@@ -853,11 +934,13 @@
+@@ -853,11 +934,13 @@ static void sdhci_prepare_data(struct sd
if (host->version >= SDHCI_SPEC_200) {
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
-@@ -909,7 +992,8 @@
+@@ -909,7 +992,8 @@ static void sdhci_set_transfer_mode(stru
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
mode |= SDHCI_TRNS_DMA;
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
-@@ -925,13 +1009,16 @@
+@@ -925,13 +1009,16 @@ static void sdhci_finish_data(struct sdh
host->data = NULL;
if (host->flags & SDHCI_REQ_USE_DMA) {
}
/*
-@@ -984,6 +1071,12 @@
+@@ -984,6 +1071,12 @@ static void sdhci_send_command(struct sd
if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
mask |= SDHCI_DATA_INHIBIT;
/* We shouldn't wait for data inihibit for stop commands, even
though they might use busy signaling */
if (host->mrq->data && (cmd == host->mrq->data->stop))
-@@ -999,12 +1092,20 @@
+@@ -999,12 +1092,20 @@ static void sdhci_send_command(struct sd
return;
}
timeout--;
sdhci_prepare_data(host, cmd);
-@@ -1220,7 +1321,9 @@
+@@ -1220,7 +1321,9 @@ clock_set:
return;
}
timeout--;
}
clk |= SDHCI_CLOCK_CARD_EN;
-@@ -1316,7 +1419,7 @@
+@@ -1316,7 +1419,7 @@ static void sdhci_request(struct mmc_hos
sdhci_runtime_pm_get(host);
WARN_ON(host->mrq != NULL);
-@@ -1374,9 +1477,9 @@
+@@ -1374,9 +1477,9 @@ static void sdhci_request(struct mmc_hos
mmc->card->type == MMC_TYPE_MMC ?
MMC_SEND_TUNING_BLOCK_HS200 :
MMC_SEND_TUNING_BLOCK;
/* Restore original mmc_request structure */
host->mrq = mrq;
-@@ -1390,7 +1493,7 @@
+@@ -1390,7 +1493,7 @@ static void sdhci_request(struct mmc_hos
}
mmiowb();
}
static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
-@@ -1399,10 +1502,10 @@
+@@ -1399,10 +1502,10 @@ static void sdhci_do_set_ios(struct sdhc
int vdd_bit = -1;
u8 ctrl;
if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
return;
-@@ -1429,9 +1532,9 @@
+@@ -1429,9 +1532,9 @@ static void sdhci_do_set_ios(struct sdhc
vdd_bit = sdhci_set_power(host, ios->vdd);
if (host->vmmc && vdd_bit != -1) {
}
if (host->ops->platform_send_init_74_clocks)
-@@ -1470,7 +1573,7 @@
+@@ -1470,7 +1573,7 @@ static void sdhci_do_set_ios(struct sdhc
else
ctrl &= ~SDHCI_CTRL_HISPD;
u16 clk, ctrl_2;
/* In case of UHS-I modes, set High Speed Enable */
-@@ -1569,7 +1672,7 @@
+@@ -1569,7 +1672,7 @@ static void sdhci_do_set_ios(struct sdhc
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
mmiowb();
}
static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-@@ -1617,7 +1720,7 @@
+@@ -1617,7 +1720,7 @@ static int sdhci_check_ro(struct sdhci_h
unsigned long flags;
int is_readonly;
if (host->flags & SDHCI_DEVICE_DEAD)
is_readonly = 0;
-@@ -1627,7 +1730,7 @@
+@@ -1627,7 +1730,7 @@ static int sdhci_check_ro(struct sdhci_h
is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
& SDHCI_WRITE_PROTECT);
/* This quirk needs to be replaced by a callback-function later */
return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
-@@ -1700,9 +1803,9 @@
+@@ -1700,9 +1803,9 @@ static void sdhci_enable_sdio_irq(struct
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
}
static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
-@@ -2046,7 +2149,7 @@
+@@ -2046,7 +2149,7 @@ static void sdhci_card_event(struct mmc_
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
/* Check host->mrq first in case we are runtime suspended */
if (host->mrq &&
-@@ -2063,7 +2166,7 @@
+@@ -2063,7 +2166,7 @@ static void sdhci_card_event(struct mmc_
tasklet_schedule(&host->finish_tasklet);
}
}
static const struct mmc_host_ops sdhci_ops = {
-@@ -2102,14 +2205,14 @@
+@@ -2102,14 +2205,14 @@ static void sdhci_tasklet_finish(unsigne
host = (struct sdhci_host*)param;
return;
}
-@@ -2147,7 +2250,7 @@
+@@ -2147,7 +2250,7 @@ static void sdhci_tasklet_finish(unsigne
#endif
mmiowb();
mmc_request_done(host->mmc, mrq);
sdhci_runtime_pm_put(host);
-@@ -2160,11 +2263,11 @@
+@@ -2160,11 +2263,11 @@ static void sdhci_timeout_timer(unsigned
host = (struct sdhci_host*)data;
sdhci_dumpregs(host);
if (host->data) {
-@@ -2181,7 +2284,7 @@
+@@ -2181,7 +2284,7 @@ static void sdhci_timeout_timer(unsigned
}
mmiowb();
}
static void sdhci_tuning_timer(unsigned long data)
-@@ -2191,11 +2294,11 @@
+@@ -2191,11 +2294,11 @@ static void sdhci_tuning_timer(unsigned
host = (struct sdhci_host *)data;
}
/*****************************************************************************\
-@@ -2209,10 +2312,13 @@
+@@ -2209,10 +2312,13 @@ static void sdhci_cmd_irq(struct sdhci_h
BUG_ON(intmask == 0);
if (!host->cmd) {
return;
}
-@@ -2282,6 +2388,19 @@
+@@ -2282,6 +2388,19 @@ static void sdhci_show_adma_error(struct
static void sdhci_show_adma_error(struct sdhci_host *host) { }
#endif
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
{
u32 command;
-@@ -2311,23 +2430,39 @@
+@@ -2311,23 +2430,39 @@ static void sdhci_data_irq(struct sdhci_
}
}
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
sdhci_show_adma_error(host);
host->data->error = -EIO;
-@@ -2335,11 +2470,18 @@
+@@ -2335,11 +2470,18 @@ static void sdhci_data_irq(struct sdhci_
host->ops->adma_workaround(host, intmask);
}
/*
* We currently don't do anything fancy with DMA
-@@ -2368,18 +2510,8 @@
+@@ -2368,18 +2510,8 @@ static void sdhci_data_irq(struct sdhci_
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}
}
}
-@@ -2390,10 +2522,10 @@
+@@ -2390,10 +2522,10 @@ static irqreturn_t sdhci_irq(int irq, vo
u32 intmask, unexpected = 0;
int cardint = 0, max_loops = 16;
pr_warning("%s: got irq while runtime suspended\n",
mmc_hostname(host->mmc));
return IRQ_HANDLED;
-@@ -2435,6 +2567,22 @@
+@@ -2435,6 +2567,22 @@ again:
tasklet_schedule(&host->card_tasklet);
}
if (intmask & SDHCI_INT_CMD_MASK) {
sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
SDHCI_INT_STATUS);
-@@ -2449,7 +2597,13 @@
+@@ -2449,7 +2597,13 @@ again:
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
if (intmask & SDHCI_INT_BUS_POWER) {
pr_err("%s: Card is consuming too much power!\n",
-@@ -2475,7 +2629,7 @@
+@@ -2475,7 +2629,7 @@ again:
if (intmask && --max_loops)
goto again;
out:
if (unexpected) {
pr_err("%s: Unexpected interrupt 0x%08x.\n",
-@@ -2569,7 +2723,8 @@
+@@ -2569,7 +2723,8 @@ int sdhci_resume_host(struct sdhci_host
{
int ret;
if (host->ops->enable_dma)
host->ops->enable_dma(host);
}
-@@ -2636,15 +2791,15 @@
+@@ -2636,15 +2791,15 @@ int sdhci_runtime_suspend_host(struct sd
host->flags &= ~SDHCI_NEEDS_RETUNING;
}
return ret;
}
-@@ -2670,16 +2825,16 @@
+@@ -2670,16 +2825,16 @@ int sdhci_runtime_resume_host(struct sdh
sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
if ((host_flags & SDHCI_PV_ENABLED) &&
!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
host->runtime_suspended = false;
-@@ -2690,7 +2845,7 @@
+@@ -2690,7 +2845,7 @@ int sdhci_runtime_resume_host(struct sdh
/* Enable Card Detection */
sdhci_enable_card_detection(host);
return ret;
}
-@@ -2785,14 +2940,16 @@
+@@ -2785,14 +2940,16 @@ int sdhci_add_host(struct sdhci_host *ho
host->flags &= ~SDHCI_USE_ADMA;
}
}
}
}
-@@ -3080,6 +3237,12 @@
+@@ -3080,6 +3237,12 @@ int sdhci_add_host(struct sdhci_host *ho
SDHCI_MAX_CURRENT_MULTIPLIER;
}
mmc->ocr_avail = ocr_avail;
mmc->ocr_avail_sdio = ocr_avail;
if (host->ocr_avail_sdio)
-@@ -3174,7 +3337,7 @@
+@@ -3174,7 +3337,7 @@ int sdhci_add_host(struct sdhci_host *ho
host->tuning_timer.function = sdhci_tuning_timer;
}
mmc_hostname(mmc), host);
if (ret) {
pr_err("%s: Failed to request IRQ %d: %d\n",
-@@ -3210,6 +3373,7 @@
+@@ -3210,6 +3373,7 @@ int sdhci_add_host(struct sdhci_host *ho
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
-@@ -3237,7 +3401,7 @@
+@@ -3237,7 +3401,7 @@ void sdhci_remove_host(struct sdhci_host
unsigned long flags;
if (dead) {
host->flags |= SDHCI_DEVICE_DEAD;
-@@ -3249,7 +3413,7 @@
+@@ -3249,7 +3413,7 @@ void sdhci_remove_host(struct sdhci_host
tasklet_schedule(&host->finish_tasklet);
}
}
sdhci_disable_card_detection(host);
-diff -urwN linux-3.10/drivers/mmc/host/sdhci.h linux-rpi-3.10.y/drivers/mmc/host/sdhci.h
---- linux-3.10/drivers/mmc/host/sdhci.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.h 2013-07-06 15:25:50.000000000 +0100
-@@ -289,6 +289,20 @@
+--- a/drivers/mmc/host/sdhci.h
++++ b/drivers/mmc/host/sdhci.h
+@@ -289,6 +289,20 @@ struct sdhci_ops {
void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
-@@ -399,9 +413,38 @@
+@@ -399,9 +413,38 @@ extern int sdhci_resume_host(struct sdhc
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
+
+
#endif /* __SDHCI_HW_H */
-diff -urN linux-3.10/include/linux/mmc/host.h linux-rpi-3.10.y/include/linux/mmc/host.h
---- linux-3.10/include/linux/mmc/host.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/include/linux/mmc/host.h 2013-07-06 15:25:50.000000000 +0100
-@@ -281,6 +281,7 @@
+--- a/include/linux/mmc/host.h
++++ b/include/linux/mmc/host.h
+@@ -281,6 +281,7 @@ struct mmc_host {
#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \
MMC_CAP2_PACKED_WR)
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
mmc_pm_flag_t pm_caps; /* supported pm features */
-diff -urN linux-3.10/include/linux/mmc/sdhci.h linux-rpi-3.10.y/include/linux/mmc/sdhci.h
---- linux-3.10/include/linux/mmc/sdhci.h 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/include/linux/mmc/sdhci.h 2013-07-06 15:25:50.000000000 +0100
-@@ -97,6 +97,7 @@
+--- a/include/linux/mmc/sdhci.h
++++ b/include/linux/mmc/sdhci.h
+@@ -97,6 +97,7 @@ struct sdhci_host {
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
const struct sdhci_ops *ops; /* Low level hw interface */
-@@ -128,6 +129,7 @@
+@@ -128,6 +129,7 @@ struct sdhci_host {
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
unsigned int version; /* SDHCI spec. version */
-@@ -142,6 +144,7 @@
+@@ -142,6 +144,7 @@ struct sdhci_host {
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
-diff -urN linux-3.10/drivers/i2c/busses/i2c-bcm2708.c linux-rpi-3.10.y/drivers/i2c/busses/i2c-bcm2708.c
---- linux-3.10/drivers/i2c/busses/i2c-bcm2708.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/i2c/busses/i2c-bcm2708.c 2013-07-06 15:25:50.000000000 +0100
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -0,0 +1,408 @@
+/*
+ * Driver for Broadcom BCM2708 BSC Controllers
+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
-diff -urN linux-3.10/drivers/i2c/busses/Kconfig linux-rpi-3.10.y/drivers/i2c/busses/Kconfig
---- linux-3.10/drivers/i2c/busses/Kconfig 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/i2c/busses/Kconfig 2013-07-06 15:25:50.000000000 +0100
-@@ -343,6 +343,25 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -343,6 +343,25 @@ config I2C_BCM2835
This support is also available as a module. If so, the module
will be called i2c-bcm2835.
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
-diff -urN linux-3.10/drivers/i2c/busses/Makefile linux-rpi-3.10.y/drivers/i2c/busses/Makefile
---- linux-3.10/drivers/i2c/busses/Makefile 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/i2c/busses/Makefile 2013-07-06 15:25:50.000000000 +0100
-@@ -32,6 +32,7 @@
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powerm
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
-diff -urN linux-3.10/drivers/tty/serial/amba-pl011.c linux-rpi-3.10.y/drivers/tty/serial/amba-pl011.c
---- linux-3.10/drivers/tty/serial/amba-pl011.c 2013-06-30 23:13:29.000000000 +0100
-+++ linux-rpi-3.10.y/drivers/tty/serial/amba-pl011.c 2013-07-06 15:25:50.000000000 +0100
-@@ -84,7 +84,7 @@
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -84,7 +84,7 @@ struct vendor_data {
static unsigned int get_fifosize_arm(unsigned int periphid)
{
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
-@@ -116,6 +116,9 @@
+@@ -120,6 +120,9 @@
#ifndef cpu_has_local_ebase
#define cpu_has_local_ebase 1
#endif
-diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
-index 5ff3a4f..36171fd 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -144,7 +144,7 @@ config SSB_SFLASH
default y
config SSB_DRIVER_EXTIF
-diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c
-index 720665c..e84cf04 100644
--- a/drivers/ssb/driver_chipcommon_sflash.c
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -9,6 +9,19 @@
{ "M25P20", 0x11, 0x10000, 4, },
{ "M25P40", 0x12, 0x10000, 8, },
-@@ -27,7 +40,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+@@ -27,7 +40,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
{ 0 },
};
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
{ "SST25WF010", 2, 0x1000, 32, },
-@@ -45,7 +58,7 @@ static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+@@ -45,7 +58,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
{ 0 },
};
{ "AT45DB011", 0xc, 256, 512, },
{ "AT45DB021", 0x14, 256, 1024, },
{ "AT45DB041", 0x1c, 256, 2048, },
-@@ -73,7 +86,8 @@ static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
+@@ -73,7 +86,8 @@ static void ssb_sflash_cmd(struct ssb_ch
/* Initialize serial flash access */
int ssb_sflash_init(struct ssb_chipcommon *cc)
{
u32 id, id2;
switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
-@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommon *cc)
+@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommo
return -ENOTSUPP;
}
pr_err("Serial flash support is not implemented yet!\n");
return -ENOTSUPP;
-diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
-index 812775a..e55ddf7 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
-@@ -553,6 +553,14 @@ static int ssb_devices_register(struct ssb_bus *bus)
+@@ -553,6 +553,14 @@ static int ssb_devices_register(struct s
}
#endif
return 0;
error:
/* Unwind the already registered devices. */
-diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c
-index 32ed1fa..69161bb 100644
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
-@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci_dev *dev)
+@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
err = pci_enable_device(dev);
if (err)
return err;
-diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
-index a3b2364..e753fbe 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
-@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const char *dump, size_t len,
+@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
while (cnt < sprom_size_words) {
memcpy(tmp, dump, 4);
dump += 4;
if (err)
return err;
sprom[cnt++] = swab16((u16)parsed);
-diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
-index 4671f17..eb507a5 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
-@@ -243,6 +243,10 @@ static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+@@ -243,6 +243,10 @@ static inline int ssb_sflash_init(struct
extern struct platform_device ssb_pflash_dev;
#endif
#ifdef CONFIG_SSB_DRIVER_EXTIF
extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
-diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
-index afe79d4..6535e47 100644
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -20,6 +20,18 @@ struct ssb_pflash {
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
-index 3a72569..f9f931c 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -172,6 +172,7 @@
-diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
-index 8b4221c..380a200 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
-diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
-index 79595a0..0215f9a 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -22,6 +22,8 @@
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
-diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
-index 17b26ce..37a5ffe 100644
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -9,6 +9,25 @@
bool bcma_core_is_enabled(struct bcma_device *core)
{
if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
-@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_device *core, u32 flags)
+@@ -25,13 +44,15 @@ void bcma_core_disable(struct bcma_devic
if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
return;
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device *core, u32 flags)
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
bcma_aread32(core, BCMA_IOCTL);
bcma_awrite32(core, BCMA_RESET_CTL, 0);
udelay(1);
bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
-diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
-index 036c674..b068f98 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
-@@ -140,8 +140,15 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+@@ -140,8 +140,15 @@ void bcma_core_chipcommon_init(struct bc
bcma_core_chipcommon_early_init(cc);
if (cc->core->id.rev >= 20) {
}
if (cc->capabilities & BCMA_CC_CAP_PMU)
-diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
-index edca73a..5081a8c 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
}
EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
-@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+@@ -66,6 +169,25 @@ static void bcma_pmu_resources_init(stru
min_msk = 0x200D;
max_msk = 0xFFFF;
break;
default:
bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
bus->chipinfo.id);
-@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *cc)
+@@ -165,6 +287,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
BCMA_CC_PMU_CTL_NOILPONW);
bcma_pmu_resources_init(cc);
bcma_pmu_workarounds(cc);
}
-diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
-index e6ed4fe..4d07cce 100644
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -30,7 +30,7 @@ struct bcma_sflash_tbl_e {
{ "M25P20", 0x11, 0x10000, 4, },
{ "M25P40", 0x12, 0x10000, 8, },
-@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+@@ -41,7 +41,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ 0 },
};
{ "SST25WF512", 1, 0x1000, 16, },
{ "SST25VF512", 0x48, 0x1000, 16, },
{ "SST25WF010", 2, 0x1000, 32, },
-@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+@@ -59,7 +59,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
{ 0 },
};
{ "AT45DB011", 0xc, 256, 512, },
{ "AT45DB021", 0x14, 256, 1024, },
{ "AT45DB041", 0x1c, 256, 2048, },
-@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc *cc)
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
{
struct bcma_bus *bus = cc->core->bus;
struct bcma_sflash *sflash = &cc->sflash;
u32 id, id2;
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
-index fbf2759..a355e63 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
-@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+@@ -275,6 +275,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
{ 0, },
};
-diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
-index f72f52b..0067422 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -93,6 +93,25 @@ struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+@@ -93,6 +93,25 @@ struct bcma_device *bcma_find_core_unit(
return NULL;
}
static void bcma_release_core_dev(struct device *dev)
{
struct bcma_device *core = container_of(dev, struct bcma_device, dev);
-diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
-index 8934298..72bf454 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -72,12 +72,12 @@ fail:
}
/**************************************************
-@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 data)
+@@ -124,29 +124,29 @@ static inline u8 bcma_crc8(u8 crc, u8 da
return t[crc ^ data];
}
expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
if (crc != expected_crc)
return -EPROTO;
-@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u16 *sprom)
+@@ -154,21 +154,25 @@ static int bcma_sprom_check_crc(const u1
return 0;
}
return 0;
}
-@@ -208,9 +212,6 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
+@@ -208,9 +212,6 @@ static void bcma_sprom_extract_r8(struct
BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
ARRAY_SIZE(bus->sprom.core_pwr_info));
for (i = 0; i < 3; i++) {
v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
-@@ -502,7 +503,7 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
+@@ -502,7 +503,7 @@ static bool bcma_sprom_onchip_available(
case BCMA_CHIP_ID_BCM4331:
present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT;
break;
- kfree(sprom);
return err;
}
-diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
-index 2e34db8..622fc50 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -144,6 +144,7 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM43224 43224
#define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8
#define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa
-diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
-index b8b09ea..c49e1a1 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -330,6 +330,8 @@
#ifdef MODULE
#define __MODULE_INFO(tag, name, info) \
static const char __UNIQUE_ID(name)[] \
-@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[]
+@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[]
= __stringify(tag) "=" info
#else /* !MODULE */
/* This struct is here for syntactic coherency, it is not used */
#endif
#define __MODULE_PARM_TYPE(name, _type) \
__MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
+@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
/* One for each parameter, describing how to use it. Some files do
multiple of these per line, so can't just use MODULE_INFO. */
#define MODULE_PARM_DESC(_parm, desc) \
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
-@@ -303,7 +303,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+@@ -303,7 +303,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
quiet_cmd_lzma = LZMA $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
/* Convert Mips rounding mode (0..3) to IEEE library modes. */
static const unsigned char ieee_rm[4] = {
[FPU_CSR_RN] = IEEE754_RN,
-@@ -116,9 +120,13 @@ static const unsigned int fpucondbit[8]
+@@ -116,9 +120,13 @@ static const unsigned int fpucondbit[8]
};
#endif
--- a/arch/mips/include/asm/string.h
+++ b/arch/mips/include/asm/string.h
-@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
#define __HAVE_ARCH_MEMSET
extern void *memset(void *__s, int __c, size_t __count);
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
*/
-@@ -1018,6 +1024,9 @@ static int m25p_probe(struct spi_device
+@@ -1018,6 +1024,9 @@ static int m25p_probe(struct spi_device
if (info->flags & SECT_4K) {
flash->erase_opcode = OPCODE_BE_4K;
flash->mtd.erasesize = 4096;
/****************************************************************************/
struct m25p {
-@@ -1022,7 +1028,7 @@ static int m25p_probe(struct spi_device
+@@ -1022,7 +1028,7 @@ static int m25p_probe(struct spi_device
flash->mtd._write = m25p80_write;
/* prefer "small sector" erase if possible */
#include <linux/pagemap.h>
#include <linux/mtd/mtd.h>
#include <linux/interrupt.h>
-@@ -236,7 +238,9 @@ static int yaffs_file_flush(struct file
+@@ -236,7 +238,9 @@ static int yaffs_file_flush(struct file
static int yaffs_file_flush(struct file *file);
#endif
result = yaffs_rd_chunk_tags_nand(dev,nand_chunk,buffer,&tempTags);
if(memcmp(buffer,data,dev->data_bytes_per_chunk) ||
tempTags.obj_id != tags->obj_id ||
-@@ -424,7 +424,7 @@ static int yaffs_write_new_chunk(struct
+@@ -424,7 +424,7 @@ static int yaffs_write_new_chunk(struct
* lot of checks that are most likely not needed.
*
* Mods to the above
* rest of the block.
*/
-@@ -486,7 +486,7 @@ static int yaffs_write_new_chunk(struct
+@@ -486,7 +486,7 @@ static int yaffs_write_new_chunk(struct
}
/* Free chunks already includes softdeleted chunks.
* How ever this chunk is going to soon be really deleted
* which will increment free chunks.
-@@ -2752,7 +2752,7 @@ int yaffs_put_chunk_in_file(yaffs_obj_t
+@@ -2752,7 +2752,7 @@ int yaffs_put_chunk_in_file(yaffs_obj_t
NULL);
if (!tn)
return YAFFS_FAIL;
#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
else if (obj->short_name[0]) {
yaffs_strcpy(name, obj->short_name);
-@@ -4861,9 +4861,9 @@ int yaffs_set_attribs(yaffs_obj_t *obj,
+@@ -4861,9 +4861,9 @@ int yaffs_set_attribs(yaffs_obj_t *obj,
if (valid & ATTR_MODE)
obj->yst_mode = attr->ia_mode;
if (valid & ATTR_UID)
if (valid & ATTR_ATIME)
obj->yst_atime = Y_TIME_CONVERT(attr->ia_atime);
-@@ -4886,9 +4886,9 @@ int yaffs_get_attribs(yaffs_obj_t *obj,
+@@ -4886,9 +4886,9 @@ int yaffs_get_attribs(yaffs_obj_t *obj,
attr->ia_mode = obj->yst_mode;
valid |= ATTR_MODE;
static struct proc_dir_entry *my_proc_entry;
static struct proc_dir_entry *debug_proc_entry;
-@@ -3668,6 +3669,7 @@ static int yaffs_proc_write(struct file
+@@ -3668,6 +3669,7 @@ static int yaffs_proc_write(struct file
{
return yaffs_proc_write_trace_options(file, buf, count, data);
}
/* LzmaDecode
--- a/lib/lzma/LzmaDec.c
+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
+@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
p->needFlush = 0;
}
{
UInt32 dicSize;
Byte d;
-@@ -935,33 +883,11 @@ static SRes LzmaDec_AllocateProbs2(CLzma
+@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
return SZ_OK;
}
-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
-- CLzmaProps propNew;
-- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-- p->prop = propNew;
-- return SZ_OK;
--}
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
{
CLzmaProps propNew;
-- SizeT dicBufSize;
RINOK(LzmaProps_Decode(&propNew, props, propsSize));
- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
+ p->prop = propNew;
+ return SZ_OK;
+ }
+-
+-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+-{
+- CLzmaProps propNew;
+- SizeT dicBufSize;
+- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
- dicBufSize = propNew.dicSize;
- if (p->dic == 0 || dicBufSize != p->dicBufSize)
- {
- }
- }
- p->dicBufSize = dicBufSize;
- p->prop = propNew;
- return SZ_OK;
- }
+- p->prop = propNew;
+- return SZ_OK;
+-}
+
+ SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
--- a/include/linux/lzma/LzmaEnc.h
+++ b/include/linux/lzma/LzmaEnc.h
@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
void MatchFinder_Construct(CMatchFinder *p);
/* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
+@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
ISzAlloc *alloc);
void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
{
memmove(p->bufferBase,
p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
+@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
p->buffer = p->bufferBase + p->keepSizeBefore;
}
depends on NETFILTER_ADVANCED
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
-@@ -134,6 +134,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
+@@ -134,6 +134,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -268,10 +268,34 @@ static int ct_open(struct inode *inode,
+@@ -268,10 +268,34 @@ static int ct_open(struct inode *inode,
sizeof(struct ct_iter_state));
}
counters = alloc_counters(table);
if (IS_ERR(counters))
-@@ -961,6 +990,14 @@ copy_entries_to_user(unsigned int total_
+@@ -960,6 +989,14 @@ copy_entries_to_user(unsigned int total_
+ ret = -EFAULT;
goto free_counters;
}
-
++
+ flags = e->ip.flags & IPT_F_MASK;
+ if (copy_to_user(userptr + off
+ + offsetof(struct ipt_entry, ip.flags),
+ ret = -EFAULT;
+ goto free_counters;
+ }
-+
+
for (i = sizeof(struct ipt_entry);
i < e->target_offset;
- i += m->u.match_size) {
Ethernet bridge, which means that the different Ethernet segments it
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
-@@ -44,3 +44,4 @@ obj-y += addrconf_core.o exthdrs_core.o
+@@ -44,3 +44,4 @@ obj-y += addrconf_core.o exthdrs_core.o
obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload)
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
-@@ -1503,27 +1503,7 @@ void netlink_detachskb(struct sock *sk,
+@@ -1503,27 +1503,7 @@ void netlink_detachskb(struct sock *sk,
static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation)
{
}
--- a/net/sched/sch_fifo.c
+++ b/net/sched/sch_fifo.c
-@@ -29,17 +29,21 @@ static int bfifo_enqueue(struct sk_buff
+@@ -29,17 +29,21 @@ static int bfifo_enqueue(struct sk_buff
static int pfifo_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
err = -EINVAL;
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
-@@ -138,6 +138,10 @@ const struct fib_prop fib_props[RTN_MAX
+@@ -138,6 +138,10 @@ const struct fib_prop fib_props[RTN_MAX
.error = -EINVAL,
.scope = RT_SCOPE_NOWHERE,
},
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
-@@ -2403,13 +2403,13 @@ int prism2_ap_get_sta_qual(local_info_t
+@@ -2403,13 +2403,13 @@ int prism2_ap_get_sta_qual(local_info_t
addr[count].sa_family = ARPHRD_ETHER;
memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
if (sta->last_rx_silence == 0)
default y
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
-@@ -44,6 +44,7 @@ static void quirk_mmio_always_on(struct
+@@ -44,6 +44,7 @@ static void quirk_mmio_always_on(struct
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -2864,6 +2865,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -2866,6 +2867,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
static ktime_t fixup_debug_start(struct pci_dev *dev,
void (*fn)(struct pci_dev *dev))
-@@ -2895,6 +2897,8 @@ static void fixup_debug_report(struct pc
+@@ -2897,6 +2899,8 @@ static void fixup_debug_report(struct pc
}
}
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -2929,6 +2933,8 @@ static void disable_igfx_irq(struct pci_
+@@ -2931,6 +2935,8 @@ static void disable_igfx_irq(struct pci_
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
if (!root_irq_dir)
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
-@@ -355,6 +355,8 @@ static int __init init_timer_list_procfs
+@@ -357,6 +357,8 @@ static int __init init_timer_list_procfs
{
struct proc_dir_entry *pe;
&fib_triestat_fops))
goto out2;
-@@ -2603,17 +2605,21 @@ int __net_init fib_proc_init(struct net
+@@ -2603,17 +2605,21 @@ int __net_init fib_proc_init(struct net
return 0;
out3:
* All of these routines try to estimate how many bits of randomness a
* particular randomness source. They do this by keeping track of the
* first and second order deltas of the event timings.
-@@ -796,6 +806,63 @@ void add_disk_randomness(struct gendisk
+@@ -796,6 +806,63 @@ void add_disk_randomness(struct gendisk
}
#endif
{
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
-@@ -101,9 +101,7 @@ static void mpcore_wdt_keepalive(struct
+@@ -101,9 +101,7 @@ static void mpcore_wdt_keepalive(struct
spin_lock(&wdt_lock);
/* Assume prescale is set to 256 */
FEATURES:=ext4 rtc usb gpio
CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
KERNELNAME:="zImage dtbs"
#DEPENDS:=+imx-bootlets
CFLAGS:=-Os -pipe -mtune=cortex-a9 -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
MAINTAINER:=Luka Perkov <luka@openwrt.org>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
imx6q-sabresd.dtb \
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -94,6 +94,14 @@
+@@ -98,6 +98,14 @@
MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
>;
};
};
ecspi1 {
-@@ -201,6 +209,12 @@
+@@ -205,6 +213,12 @@
MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
};
i2c3 {
-@@ -210,6 +224,12 @@
+@@ -214,6 +228,12 @@
MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
};
uart1 {
-@@ -219,6 +239,12 @@
+@@ -223,6 +243,12 @@
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
};
uart2 {
-@@ -228,6 +254,21 @@
+@@ -232,6 +258,21 @@
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
};
uart4 {
-@@ -238,6 +279,15 @@
+@@ -242,6 +283,15 @@
>;
};
};
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -328,6 +328,15 @@
+@@ -382,6 +382,15 @@
};
};
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
SUBTARGETS=generic harddisk
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
DEVICE_TYPE:=developerboard
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
SUBTARGETS=generic p1020
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
FEATURES:=squashfs gpio
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\
arch/mips/kernel/cevt-r4k.c | 39 ++++++++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 13 deletions(-)
-diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
-index 02033ea..da4a003 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long delta,
+@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long
#endif /* CONFIG_MIPS_MT_SMTC */
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
int cp0_timer_irq_installed;
-@@ -90,6 +84,32 @@ struct irqaction c0_compare_irqaction = {
+@@ -90,6 +84,32 @@ struct irqaction c0_compare_irqaction =
.name = "timer",
};
return 0;
}
---
-1.7.10.4
-
4 files changed, 82 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/ralink/pinmux.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 38cf1a8..341b4de 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
-diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
-index 83144c3..f113fd6 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
-@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_soc_info *soc_info);
+@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_
__iomem void *plat_of_remap_node(const char *node);
+void ralink_pinmux(void);
+
#endif /* _RALINK_COMMON_H__ */
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 6b5f340..b25c1f2 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -110,6 +110,8 @@ static int __init plat_of_setup(void)
return 0;
}
-diff --git a/arch/mips/ralink/pinmux.c b/arch/mips/ralink/pinmux.c
-new file mode 100644
-index 0000000..1720216
--- /dev/null
+++ b/arch/mips/ralink/pinmux.c
@@ -0,0 +1,77 @@
+
+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
+}
---
-1.7.10.4
-
2 files changed, 193 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/ralink/timer.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 341b4de..cae7d88 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
-diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
-new file mode 100644
-index 0000000..0a6856c
--- /dev/null
+++ b/arch/mips/ralink/timer.c
@@ -0,0 +1,192 @@
+MODULE_DESCRIPTION("Ralink RT2880 timer");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL");
---
-1.7.10.4
-
arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-index 5a508f9..bd93014 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
+@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned r
return __raw_readl(rt_sysc_membase + reg);
}
static inline void rt_memc_w32(u32 val, unsigned reg)
{
__raw_writel(val, rt_memc_membase + reg);
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 3 +++
1 file changed, 3 insertions(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 0018b1a..ccdec5a 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
-@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -214,16 +214,19 @@ void prom_soc_init(struct ralink_soc_inf
switch (dram_type) {
case SYSCFG0_DRAM_TYPE_SDRAM:
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
break;
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index ccdec5a..62356a0 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -20,6 +20,22 @@
/* does the board have sdram or ddram */
static int dram_type;
-@@ -187,6 +203,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -187,6 +203,8 @@ void prom_soc_init(struct ralink_soc_inf
u32 n1;
u32 rev;
u32 cfg0;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-@@ -234,4 +252,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -234,4 +252,12 @@ void prom_soc_init(struct ralink_soc_inf
BUG();
}
soc_info->mem_base = MT7620_DRAM_BASE;
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
}
---
-1.7.10.4
-
2 files changed, 50 insertions(+)
create mode 100644 arch/mips/ralink/bootrom.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index cae7d88..5fa6129 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -15,4 +15,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
+
obj-y += dts/
-diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
-new file mode 100644
-index 0000000..f926f6f
--- /dev/null
+++ b/arch/mips/ralink/bootrom.c
@@ -0,0 +1,48 @@
+}
+
+postcore_initcall(bootrom_setup);
---
-1.7.10.4
-
2 files changed, 89 insertions(+)
create mode 100644 arch/mips/ralink/ill_acc.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 5fa6129..03af636 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,6 +8,8 @@
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
-diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
-new file mode 100644
-index 0000000..4a3f696
--- /dev/null
+++ b/arch/mips/ralink/ill_acc.c
@@ -0,0 +1,87 @@
+}
+
+arch_initcall(ill_acc_of_setup);
---
-1.7.10.4
-
arch/mips/ralink/of.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index b25c1f2..8efb02b 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,7 +74,7 @@ void __init device_tree_init(void)
}
void __init plat_mem_setup(void)
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 62356a0..96422e5 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -183,6 +183,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000c00.uartlite", 40000000);
}
---
-1.7.10.4
-
3 files changed, 283 insertions(+)
create mode 100644 arch/mips/pci/pci-rt2880.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 2cb1d31..77974ba 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
-new file mode 100644
-index 0000000..e2c4730
--- /dev/null
+++ b/arch/mips/pci/pci-rt2880.c
@@ -0,0 +1,281 @@
+}
+
+arch_initcall(pcibios_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 026e823..cd13da8 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -8,6 +8,7 @@ choice
config SOC_RT305X
bool "RT305x"
---
-1.7.10.4
-
3 files changed, 642 insertions(+)
create mode 100644 arch/mips/pci/pci-rt3883.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 77974ba..3cbfd9b 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
-new file mode 100644
-index 0000000..212c90b
--- /dev/null
+++ b/arch/mips/pci/pci-rt3883.c
@@ -0,0 +1,640 @@
+}
+
+postcore_initcall(rt3883_pci_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index cd13da8..592e5f9 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -20,6 +20,7 @@ choice
config SOC_MT7620
bool "MT7620"
---
-1.7.10.4
-
3 files changed, 365 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7620a.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 3cbfd9b..025d3a7 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
-diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
-new file mode 100644
-index 0000000..271763c
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620a.c
@@ -0,0 +1,363 @@
+}
+
+arch_initcall(mt7620a_pci_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 592e5f9..992e365 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -24,6 +24,7 @@ choice
endchoice
---
-1.7.10.4
-
include/linux/phy.h | 2 +-
2 files changed, 7 insertions(+), 4 deletions(-)
-diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
-index 38f0b31..ad64a75 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -773,7 +773,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -820,7 +820,8 @@ void phy_state_machine(struct work_struc
* negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
phydev->adjust_link(phydev->attached_dev);
break;
}
-@@ -843,7 +844,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -890,7 +891,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
}
phydev->adjust_link(phydev->attached_dev);
-@@ -855,7 +857,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -902,7 +904,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
phydev->adjust_link(phydev->attached_dev);
}
break;
-diff --git a/include/linux/phy.h b/include/linux/phy.h
-index 9e11039..9a8ca78 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -298,7 +298,7 @@ struct phy_device {
enum phy_state state;
u32 dev_flags;
---
-1.7.10.4
-
include/linux/of_net.h | 1 +
2 files changed, 38 insertions(+)
-diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
-index ffab033..15f4a71 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -10,6 +10,7 @@
/**
* It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct device_node *np)
+@@ -92,3 +93,39 @@ const void *of_get_mac_address(struct de
return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-diff --git a/include/linux/of_net.h b/include/linux/of_net.h
-index 61bf53b..6e6b4a9 100644
--- a/include/linux/of_net.h
+++ b/include/linux/of_net.h
@@ -11,6 +11,7 @@
#else
static inline const int of_get_phy_mode(struct device_node *np)
{
---
-1.7.10.4
-
create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
-diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-new file mode 100644
-index 0000000..2098c5c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -0,0 +1,27 @@
+};
+
+#endif /* _RT305X_ESW_PLATFORM_H */
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-index ca7ee3a..1a6b458 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
-diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
-index ed956e0..0b3caa1 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -135,6 +135,7 @@ config ETHOC
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
-diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
-index 8268d85..508c494 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig
-new file mode 100644
-index 0000000..ca2c9ad
--- /dev/null
+++ b/drivers/net/ethernet/ralink/Kconfig
@@ -0,0 +1,31 @@
+ select PHYLIB
+ select SWCONFIG
+endif
-diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile
-new file mode 100644
-index 0000000..a38fa21
--- /dev/null
+++ b/drivers/net/ethernet/ralink/Makefile
@@ -0,0 +1,18 @@
+ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o
+
+obj-$(CONFIG_NET_RALINK) += ralink-eth.o
-diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c
-new file mode 100644
-index 0000000..b937062
--- /dev/null
+++ b/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -0,0 +1,1463 @@
+{
+ platform_driver_unregister(&esw_driver);
+}
-diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h
-new file mode 100644
-index 0000000..2ced3dff
--- /dev/null
+++ b/drivers/net/ethernet/ralink/esw_rt3052.h
@@ -0,0 +1,32 @@
+
+#endif
+#endif
-diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c
-new file mode 100644
-index 0000000..9fa6a54
--- /dev/null
+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
@@ -0,0 +1,1027 @@
+
+ return 0;
+}
-diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h
-new file mode 100644
-index 0000000..fd4add5
--- /dev/null
+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
@@ -0,0 +1,29 @@
+extern int mt7620a_has_carrier(struct fe_priv *priv);
+
+#endif
-diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c
-new file mode 100644
-index 0000000..b265c75
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio.c
@@ -0,0 +1,245 @@
+ of_node_put(priv->mii_bus->dev.of_node);
+ kfree(priv->mii_bus);
+}
-diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h
-new file mode 100644
-index 0000000..c3910a0
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio.h
@@ -0,0 +1,29 @@
+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
+#endif
+#endif
-diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
-new file mode 100644
-index 0000000..701c7b6
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
@@ -0,0 +1,232 @@
+
+ return;
+}
-diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
-new file mode 100644
-index 0000000..51e3633
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
@@ -0,0 +1,26 @@
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+
+#endif
-diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c
-new file mode 100644
-index 0000000..8c36dba
--- /dev/null
+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -0,0 +1,735 @@
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
-diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h
-new file mode 100644
-index 0000000..85bc881
--- /dev/null
+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
@@ -0,0 +1,374 @@
+u32 fe_r32(unsigned reg);
+
+#endif /* FE_ETH_H */
-diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c
-new file mode 100644
-index 0000000..55e303f
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_mt7620.c
@@ -0,0 +1,111 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
-new file mode 100644
-index 0000000..1110947
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt2880.c
@@ -0,0 +1,51 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c
-new file mode 100644
-index 0000000..482ca1f
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt305x.c
@@ -0,0 +1,113 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c
-new file mode 100644
-index 0000000..c660529
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt3883.c
@@ -0,0 +1,60 @@
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
+
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 8 ++++++++
2 files changed, 9 insertions(+)
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-index 9809972..d469c69 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -20,6 +20,7 @@
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 96422e5..6f6b1c8 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -185,6 +185,14 @@ void __init ralink_clk_init(void)
}
void __init ralink_of_remap(void)
---
-1.7.10.4
-
3 files changed, 200 insertions(+)
create mode 100644 drivers/usb/phy/ralink-phy.c
-diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
-index 2311b1e..2944b8c 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -210,4 +210,12 @@ config USB_ULPI_VIEWPORT
+ SoCs.
+
endif # USB_PHY
-diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
-index a9169cb..f7da66b 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
-@@ -31,3 +31,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
+@@ -31,3 +31,4 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-us
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
-diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c
-new file mode 100644
-index 0000000..269cff4
--- /dev/null
+++ b/drivers/usb/phy/ralink-phy.c
@@ -0,0 +1,191 @@
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Ralink USB phy");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
---
-1.7.10.4
-
drivers/usb/host/ohci-platform.c | 37 ++++++++++++++++++++++++++++++++-----
4 files changed, 51 insertions(+), 10 deletions(-)
-Index: linux-3.10.1/arch/mips/ralink/Kconfig
-===================================================================
---- linux-3.10.1.orig/arch/mips/ralink/Kconfig 2013-07-15 17:35:28.021178556 +0200
-+++ linux-3.10.1/arch/mips/ralink/Kconfig 2013-07-15 20:00:19.501385660 +0200
-@@ -24,6 +24,8 @@
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -24,6 +24,8 @@ choice
config SOC_MT7620
bool "MT7620"
select HW_HAS_PCI
endchoice
-Index: linux-3.10.1/drivers/usb/Makefile
-===================================================================
---- linux-3.10.1.orig/drivers/usb/Makefile 2013-07-13 20:42:41.000000000 +0200
-+++ linux-3.10.1/drivers/usb/Makefile 2013-07-15 19:47:26.725367249 +0200
-@@ -10,6 +10,8 @@
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -10,6 +10,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-@@ -44,7 +46,6 @@
+@@ -44,7 +46,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
-Index: linux-3.10.1/drivers/usb/host/ehci-platform.c
-===================================================================
---- linux-3.10.1.orig/drivers/usb/host/ehci-platform.c 2013-07-15 17:35:22.761178428 +0200
-+++ linux-3.10.1/drivers/usb/host/ehci-platform.c 2013-07-15 19:47:14.525366961 +0200
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,8 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "ehci.h"
-@@ -118,6 +120,15 @@
+@@ -118,6 +120,15 @@ static int ehci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
-@@ -155,6 +166,9 @@
+@@ -155,6 +166,9 @@ static int ehci_platform_remove(struct p
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
return 0;
}
-@@ -199,9 +213,8 @@
+@@ -199,9 +213,8 @@ static int ehci_platform_resume(struct d
#define ehci_platform_resume NULL
#endif /* CONFIG_PM */
{}
};
-@@ -225,7 +238,7 @@
+@@ -225,7 +238,7 @@ static struct platform_driver ehci_platf
.owner = THIS_MODULE,
.name = "ehci-platform",
.pm = &ehci_platform_pm_ops,
}
};
-Index: linux-3.10.1/drivers/usb/host/ohci-platform.c
-===================================================================
---- linux-3.10.1.orig/drivers/usb/host/ohci-platform.c 2013-07-13 20:42:41.000000000 +0200
-+++ linux-3.10.1/drivers/usb/host/ohci-platform.c 2013-07-15 19:55:15.913378428 +0200
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
@@ -16,6 +16,10 @@
#include <linux/err.h>
#include <linux/platform_device.h>
static int ohci_platform_reset(struct usb_hcd *hcd)
{
-@@ -88,14 +92,22 @@
+@@ -88,14 +92,22 @@ static int ohci_platform_probe(struct pl
{
struct usb_hcd *hcd;
struct resource *res_mem;
if (usb_disabled())
return -ENODEV;
-@@ -128,6 +140,12 @@
+@@ -128,6 +140,12 @@ static int ohci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
-@@ -162,6 +180,9 @@
+@@ -162,6 +180,9 @@ static int ohci_platform_remove(struct p
if (pdata->power_off)
pdata->power_off(dev);
return 0;
}
-@@ -201,6 +222,11 @@
+@@ -201,6 +222,11 @@ static int ohci_platform_resume(struct d
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
-@@ -221,5 +247,6 @@
+@@ -221,5 +247,6 @@ static struct platform_driver ohci_platf
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
drivers/tty/serial/8250/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
-index 80fe91e..f6d6820 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
-@@ -296,7 +296,7 @@ config SERIAL_8250_EM
+@@ -300,7 +300,7 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
help
If you have a Ralink RT288x/RT305x SoC based board and want to use the
serial port, say Y to this option. The driver can handle up to 2 serial
---
-1.7.10.4
-
drivers/tty/serial/of_serial.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
-index 39c7ea4..0f333f3 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
-@@ -103,7 +103,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
+@@ -103,7 +103,10 @@ static int of_platform_serial_setup(stru
port->fifosize = prop;
port->irq = irq_of_parse_and_map(np, 0);
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
switch (prop) {
case 1:
---
-1.7.10.4
-
5 files changed, 172 insertions(+)
create mode 100644 drivers/clocksource/cevt-rt3352.c
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 8f49ed7..f5d97b8 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,7 @@ choice
endchoice
-diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
-index 8dfa22f..bba0cdf 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -69,4 +69,5 @@ void __init plat_time_init(void)
clk_put(clk);
+ clocksource_of_init();
}
-diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
-index f151c6c..0e58a49 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -7,6 +7,12 @@ config CLKSRC_I8253
config I8253_LOCK
bool
-diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
-index 8d979c7..423a2ef 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
-diff --git a/drivers/clocksource/cevt-rt3352.c b/drivers/clocksource/cevt-rt3352.c
-new file mode 100644
-index 0000000..bd50edd
--- /dev/null
+++ b/drivers/clocksource/cevt-rt3352.c
@@ -0,0 +1,162 @@
+}
+
+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
---
-1.7.10.4
-
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 7a58ab9..5737c4b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -443,6 +443,7 @@ config RALINK
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
-diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
-new file mode 100644
-index 0000000..f68ee16
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 573c449..4f2f7c2 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -209,6 +209,12 @@ config GPIO_RCAR
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 0cb2d65..feb9647 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
+@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
-diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
-new file mode 100644
-index 0000000..12984f1
--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,326 @@
+}
+
+subsys_initcall(ralink_gpio_init);
---
-1.7.10.4
-
3 files changed, 482 insertions(+)
create mode 100644 drivers/spi/spi-ralink.c
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 92a9345..30e73ea 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -345,6 +345,12 @@ config SPI_RSPI
+@@ -354,6 +354,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 33f9c09..724e8de1 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
-diff --git a/drivers/spi/spi-ralink.c b/drivers/spi/spi-ralink.c
-new file mode 100644
-index 0000000..b07cbaa
--- /dev/null
+++ b/drivers/spi/spi-ralink.c
@@ -0,0 +1,475 @@
+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL");
---
-1.7.10.4
-
4 files changed, 216 insertions(+)
create mode 100644 drivers/watchdog/rt2880_wdt.c
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 6f6b1c8..14c28b0 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -182,6 +182,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index e89fc31..5e34760 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1104,6 +1104,13 @@ config LANTIQ_WDT
# PARISC Architecture
# POWERPC Architecture
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index a300b94..2681e3d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -134,6 +134,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
# PARISC Architecture
-diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
-new file mode 100644
-index 0000000..ebba535
--- /dev/null
+++ b/drivers/watchdog/rt2880_wdt.c
@@ -0,0 +1,207 @@
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
---
-1.7.10.4
-
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
create mode 100644 drivers/i2c/busses/i2c-ralink.c
-diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-new file mode 100644
-index 0000000..8fa8ac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
@@ -0,0 +1,27 @@
+ };
+ };
+};
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 631736e..e2c2381 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -628,6 +628,10 @@ config I2C_PXA_SLAVE
config HAVE_S3C2410_I2C
bool
help
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 8f4fc23..7e39a13 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
-diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c
-new file mode 100644
-index 0000000..f4dc13d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ralink.c
@@ -0,0 +1,274 @@
+MODULE_DESCRIPTION("Ralink I2c host driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:Ralink-I2C");
---
-1.7.10.4
-
create mode 100644 drivers/mmc/host/mt6575_sd.h
create mode 100644 drivers/mmc/host/sdhci-mt7620.c
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index 9ab8f8d..ef6bf59 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -260,6 +260,17 @@ config MMC_SDHCI_BCM2835
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index cd32280..c800bed 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o
+@@ -62,6 +62,7 @@ obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-
obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
-diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h
-new file mode 100644
-index 0000000..406382c
--- /dev/null
+++ b/drivers/mmc/host/mt6575_sd.h
@@ -0,0 +1,1068 @@
+
+#endif
+
-diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c
-new file mode 100644
-index 0000000..a3cb5e4
--- /dev/null
+++ b/drivers/mmc/host/sdhci-mt7620.c
@@ -0,0 +1,2314 @@
+MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
+
+EXPORT_SYMBOL(msdc_6575_host);
---
-1.7.10.4
-
arch/mips/ralink/reset.c | 1 +
3 files changed, 61 insertions(+)
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 5737c4b..8258e8e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -444,6 +444,7 @@ config RALINK
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 8efb02b..2faf478 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -14,16 +14,22 @@
ralink_pinmux();
return 0;
-diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
-index 22120e5..6c15f4f 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -10,6 +10,7 @@
#include <asm/reboot.h>
---
-1.7.10.4
-
include/linux/gpio.h | 26 ++++++++-
5 files changed, 172 insertions(+), 12 deletions(-)
-diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
-index d933af3..c264748 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -112,3 +112,63 @@ where,
+ gpio-export,output = <1>;
+ };
+};
-diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
-index 665f953..15ec5e5 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -21,6 +21,8 @@
/* Private data structure for of_gpiochip_find_and_xlate */
struct gg_data {
-@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+@@ -242,3 +244,69 @@ void of_gpiochip_remove(struct gpio_chip
if (chip->of_node)
of_node_put(chip->of_node);
}
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-index c2534d6..8697c82 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
-@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct gpio_desc *desc);
+@@ -96,7 +96,7 @@ static int gpiod_get_value(const struct
static void gpiod_set_value(struct gpio_desc *desc, int value);
static int gpiod_cansleep(const struct gpio_desc *desc);
static int gpiod_to_irq(const struct gpio_desc *desc);
static int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
static int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-@@ -674,7 +674,7 @@ static ssize_t export_store(struct class *class,
+@@ -674,7 +674,7 @@ static ssize_t export_store(struct class
status = -ENODEV;
goto done;
}
{
unsigned long flags;
int status;
-@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+@@ -783,6 +784,8 @@ static int gpiod_export(struct gpio_desc
goto fail_unlock;
}
static int match_export(struct device *dev, const void *data)
{
-@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(struct gpio_chip *chip)
+@@ -1092,7 +1095,7 @@ static inline void gpiochip_unexport(str
}
static inline int gpiod_export(struct gpio_desc *desc,
{
return -ENOSYS;
}
-@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+@@ -1521,6 +1524,9 @@ int gpio_request_one(unsigned gpio, unsi
if (flags & GPIOF_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
if (flags & GPIOF_DIR_IN)
err = gpiod_direction_input(desc);
else
-@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+@@ -1531,7 +1537,7 @@ int gpio_request_one(unsigned gpio, unsi
goto free_gpio;
if (flags & GPIOF_EXPORT) {
if (err)
goto free_gpio;
}
-diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
-index bde6469..3290572 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
+@@ -202,7 +202,8 @@ extern void gpio_free_array(const struct
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
{
return -ENOSYS;
}
-diff --git a/include/linux/gpio.h b/include/linux/gpio.h
-index 552e3f4..07bbbcc7 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -27,6 +27,9 @@
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
-@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+@@ -169,7 +172,8 @@ static inline void gpio_set_value_cansle
WARN_ON(1);
}
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
-@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,
+@@ -236,4 +240,24 @@ int devm_gpio_request_one(struct device
unsigned long flags, const char *label);
void devm_gpio_free(struct device *dev, unsigned int gpio);
+}
+
#endif /* __LINUX_GPIO_H */
---
-1.7.10.4
-
arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 197 insertions(+), 16 deletions(-)
-diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
-index 0a6856c..b156419 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -12,6 +12,8 @@
};
static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
static irqreturn_t rt_timer_irq(int irq, void *_rt)
{
struct rt_timer *rt = (struct rt_timer *) _rt;
if (err) {
dev_err(rt->dev, "failed to request irq\n");
} else {
-@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
else
rt->timer_div = divisor;
return 0;
}
-@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_timer *rt)
+@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
}
if (!res) {
dev_err(&pdev->dev, "no memory resource found\n");
-@@ -147,12 +310,29 @@ static int rt_timer_probe(struct platform_device *pdev)
+@@ -147,12 +310,29 @@ static int rt_timer_probe(struct platfor
if (!rt->timer_freq)
return -EINVAL;
dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
-@@ -163,6 +343,7 @@ static int rt_timer_remove(struct platform_device *pdev)
+@@ -163,6 +343,7 @@ static int rt_timer_remove(struct platfo
{
struct rt_timer *rt = platform_get_drvdata(pdev);
rt_timer_disable(rt);
rt_timer_free(rt);
-@@ -187,6 +368,6 @@ static struct platform_driver rt_timer_driver = {
+@@ -187,6 +368,6 @@ static struct platform_driver rt_timer_d
module_platform_driver(rt_timer_driver);
+MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
MODULE_LICENSE("GPL");
---
-1.7.10.4
-
arch/mips/ralink/of.c | 4 +++-
3 files changed, 7 insertions(+), 2 deletions(-)
-diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
-index c61cdae..b4e55bb 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
-@@ -140,6 +140,9 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
+@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
+ .fill 0x400
+ #endif /* CONFIG_IMAGE_CMDLINE_HACK */
+ .ascii "OWRTDTB:"
+ EXPORT(__image_dtb)
__REF
NESTED(kernel_entry, 16, sp) # kernel entry point
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 03af636..9b32626 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
-@@ -19,4 +19,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+@@ -19,4 +19,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin
obj-$(CONFIG_DEBUG_FS) += bootrom.o
-obj-y += dts/
+#obj-y += dts/
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 2faf478..d87222f 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -83,6 +83,8 @@ void __init device_tree_init(void)
if (soc_info.mem_size)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
---
-1.7.10.4
-
drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index fff665d..ab8eb03 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1956,7 +1956,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
+@@ -1957,7 +1957,7 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
break;
if (time_after(jiffies, timeo)) {
-@@ -2045,7 +2045,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+@@ -2046,7 +2046,7 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
xip_enable(map, chip, adr);
break;
}
---
-1.7.10.4
-
drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index ab8eb03..d84668d 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -41,7 +41,7 @@
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
-@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
+@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
-@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
+@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
mtd->_write = cfi_amdstd_write_buffers;
}
}
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
-@@ -1584,7 +1589,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+@@ -1585,7 +1590,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
-@@ -1659,6 +1663,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1660,6 +1664,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
/*
* Wait for the flash chip to become ready to write data
---
-1.7.10.4
-
-Index: linux-3.10.1/drivers/mtd/mtdpart.c
-===================================================================
---- linux-3.10.1.orig/drivers/mtd/mtdpart.c 2013-07-15 11:39:25.376669514 +0200
-+++ linux-3.10.1/drivers/mtd/mtdpart.c 2013-07-15 11:49:53.040684471 +0200
-@@ -807,10 +807,6 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -807,10 +807,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
-Index: linux-3.10.1/drivers/staging/dwc2/hcd.c
-===================================================================
---- linux-3.10.1.orig/drivers/staging/dwc2/hcd.c 2013-07-13 20:42:41.000000000 +0200
-+++ linux-3.10.1/drivers/staging/dwc2/hcd.c 2013-07-15 18:23:20.193246998 +0200
+--- a/drivers/staging/dwc2/hcd.c
++++ b/drivers/staging/dwc2/hcd.c
@@ -47,6 +47,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
-@@ -2712,6 +2713,8 @@
+@@ -2712,6 +2713,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.10.1
+LINUX_VERSION:=3.10.2
DEVICE_TYPE:=developerboard
projects / openwrt / svn-archive / archive.git / commitdiff