set_wifi_led "m2m:blue:wifi"
ucidef_set_led_netdev "eth" "Ethernet" "m2m:green:wan" "eth0"
;;
- omni-emb-hpm)
- ucidef_set_led_default "power" "POWER" "emb:orange:power" "1"
- ucidef_set_led_netdev "eth" "ETH" "emb:green:eth" "eth0"
- set_wifi_led "emb:green:wifi"
- ;;
- omni-plug)
- set_wifi_led "miniplug:green:wlan"
- set_usb_led "miniplug:green:mobile"
+ hpm)
+ ucidef_set_led_default "power" "POWER" "hpm:orange:power" "1"
+ ucidef_set_led_netdev "eth" "ETH" "hpm:green:eth" "eth0"
+ set_wifi_led "hpm:green:wifi"
+ ;;
+ miniembplug)
+ set_wifi_led "miniembplug:green:wlan"
+ set_usb_led "miniembplug:green:mobile"
;;
px4885)
set_wifi_led "7links:orange:wifi"
;;
d105 | \
na930 | \
- omni-emb-hpm|\
+ hpm|\
wli-tx4-ag300n)
ucidef_set_interface_lan "eth0"
;;
nw718)
status_led="nw718:amber:cpu"
;;
- omni-emb|\
- omni-emb-hpm)
- status_led="emb:green:status"
+ miniembwifi)
+ status_led="miniembwifi:green:status"
+ ;;
+ hpm)
+ status_led="hpm:green:status"
;;
pbr-m1)
status_led="pbr-m1:green:sys"
*"Intenso Memory 2 Move")
name="m2m"
;;
- *"Omnima EMB HPM")
- name="omni-emb-hpm"
+ *"Omnima HPM")
+ name="hpm"
;;
*"Omnima MiniEMBWiFi")
- name="omni-emb"
+ name="miniembwifi"
;;
- *"Omnima MiniPlug")
- name="omni-plug"
+ *"Omnima MiniEMBPlug")
+ name="miniembplug"
;;
*"Olimex RT5350F-OLinuXino")
name="rt5350f-olinuxino"
mzk-dp150n | \
nbg-419n | \
nw718 | \
- omni-emb | \
- omni-emb-hpm | \
- omni-plug | \
+ miniembwifi | \
+ hpm | \
+ miniembplug | \
rt5350f-olinuxino | \
rt5350f-olinuxino-evb | \
psr-680w | \
--- /dev/null
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+ compatible = "HPM", "ralink,rt3883-soc";
+ model = "Omnima HPM";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "macronix,mx25l12805d";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "config";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x00050000 0x00fb0000>;
+ label = "firmware";
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 14 0>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "hpm:orange:power";
+ gpios = <&gpio0 7 1>;
+ };
+
+ status {
+ label = "hpm:green:status";
+ gpios = <&gpio0 21 1>;
+ };
+
+ eth {
+ label = "hpm:green:eth";
+ gpios = <&gpio0 20 1>;
+ };
+
+ eth2 {
+ label = "hpm:red:eth";
+ gpios = <&gpio0 18 1>;
+ };
+
+ wifi {
+ label = "hpm:green:wifi";
+ gpios = <&gpio0 17 1>;
+ };
+
+ wifi2 {
+ label = "hpm:red:wifi";
+ gpios = <&gpio0 19 1>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ /* gpio 12 and 13 handle the OC input */
+
+ usb0 {
+ gpio-export,name = "usb0";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 2 0>;
+ };
+
+ usb1 {
+ gpio-export,name = "usb1";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 1 0>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
+ model = "Omnima MiniEMBPlug";
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "miniembplug:red:wlan";
+ gpios = <&gpio0 9 0>;
+ };
+
+ mobile {
+ label = "miniembplug:green:mobile";
+ gpios = <&gpio0 13 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x211>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x211>;
+ };
+
+ mode-one {
+ label = "mode1";
+ gpios = <&gpio0 11 1>;
+ linux,code = <0x211>;
+ };
+
+ mode-two {
+ label = "mode2";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x211>;
+ };
+ };
+
+ palmbus@10000000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ otg@101c0000 {
+ status = "okay";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ compatible = "MINIEMBWIFI", "ralink,rt3052-soc";
+ model = "Omnima MiniEMBWiFi";
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "miniembwifi:green:status";
+ gpios = <&gpio0 9 1>;
+ };
+
+ wlan {
+ label = "miniembwifi:green:wlan";
+ gpios = <&gpio0 14 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x28>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ otg@101c0000 {
+ status = "okay";
+ };
+};
+++ /dev/null
-/dts-v1/;
-
-/include/ "rt3883.dtsi"
-
-/ {
- compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
- model = "Omnima EMB HPM";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- compatible = "macronix,mx25l12805d";
- spi-max-frequency = <25000000>;
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "config";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- reg = <0x00050000 0x00fb0000>;
- label = "firmware";
- };
- };
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet@10100000 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
- mtd-mac-address = <&factory 0x28>;
-
- mdio-bus {
- status = "okay";
-
- phy0: ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci@101c0000 {
- status = "okay";
- };
-
- ohci@101c1000 {
- status = "okay";
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 14 0>;
- linux,code = <0x198>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power {
- label = "emb:orange:power";
- gpios = <&gpio0 7 1>;
- };
-
- status {
- label = "emb:green:status";
- gpios = <&gpio0 21 1>;
- };
-
- eth {
- label = "emb:green:eth";
- gpios = <&gpio0 20 1>;
- };
-
- eth2 {
- label = "emb:red:eth";
- gpios = <&gpio0 18 1>;
- };
-
- wifi {
- label = "emb:green:wifi";
- gpios = <&gpio0 17 1>;
- };
-
- wifi2 {
- label = "emb:red:wifi";
- gpios = <&gpio0 19 1>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- /* gpio 12 and 13 handle the OC input */
-
- usb0 {
- gpio-export,name = "usb0";
- gpio-export,output = <1>;
- gpios = <&gpio0 2 0>;
- };
-
- usb1 {
- gpio-export,name = "usb1";
- gpio-export,output = <1>;
- gpios = <&gpio0 1 0>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "rt3050.dtsi"
-
-/ {
- compatible = "OMNI-EMB", "ralink,rt3052-soc";
- model = "Omnima MiniEMBWiFi";
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- status {
- label = "emb:green:status";
- gpios = <&gpio0 9 1>;
- };
-
- wlan {
- label = "emb:green:wlan";
- gpios = <&gpio0 14 1>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 1>;
- linux,code = <0x198>;
- };
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x28>;
- };
-
- esw@10110000 {
- ralink,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "rt5350.dtsi"
-
-/ {
- compatible = "OMNI-PLUG", "ralink,rt5350-soc";
- model = "Omnima MiniPlug";
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "miniplug:red:wlan";
- gpios = <&gpio0 9 0>;
- };
-
- mobile {
- label = "miniplug:green:mobile";
- gpios = <&gpio0 13 1>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 1>;
- linux,code = <0x211>;
- };
-
- mode-one {
- label = "mode1";
- gpios = <&gpio0 11 1>;
- linux,code = <0x211>;
- };
-
- mode-two {
- label = "mode2";
- gpios = <&gpio0 12 1>;
- linux,code = <0x211>;
- };
- };
-
- palmbus@10000000 {
- gpio0: gpio@600 {
- status = "okay";
- };
-
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0 0>;
- linux,modalias = "m25p80", "mx25l6405d";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- ethernet@10100000 {
- mtd-mac-address = <&factory 0x4>;
- };
-
- esw@10110000 {
- ralink,portmap = <0x2f>;
- };
-
- wmac@10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- otg@101c0000 {
- status = "okay";
- };
-};
Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image)
-Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
+Image/Build/Profile/MINIEMBPLUG=$(call BuildFirmware/Default8M/$(1),$(1),miniembplug,MINIEMBPLUG)
-Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG)
+Image/Build/Profile/MINIEMBWIFI=$(call BuildFirmware/Default8M/$(1),$(1),miniembwifi,MINIEMBWIFI)
Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NCS601W,$(1))
$(call Image/Build/Profile/NW718,$(1))
- $(call Image/Build/Profile/OMNI-EMB,$(1))
- $(call Image/Build/Profile/OMNI-PLUG,$(1))
+ $(call Image/Build/Profile/MINIEMBWIFI,$(1))
+ $(call Image/Build/Profile/MINIEMBPLUG,$(1))
$(call Image/Build/Profile/PSR-680W,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/PX4885,$(1))
Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645,$(ralink_default_fw_size_8M))
-omniembhpm_mtd_size=16449536
-Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
+hpm_mtd_size=16449536
+Image/Build/Profile/HPM=$(call BuildFirmware/CustomFlash/$(1),$(1),hpm,HPM,$(hpm_mtd_size))
define BuildFirmware/RTN56U/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RT-N56U)
define Image/Build/Profile/Default
$(call Image/Build/Profile/CYSWR1100,$(1))
$(call Image/Build/Profile/DIR645,$(1))
- $(call Image/Build/Profile/OMNIEMBHPM,$(1))
+ $(call Image/Build/Profile/HPM,$(1))
$(call Image/Build/Profile/RTN56U,$(1))
$(call Image/Build/Profile/BR6475ND,$(1))
$(call Image/Build/Profile/TEW691GR,$(1))
# See /LICENSE for more information.
#
-define Profile/OMNIEMBHPM
- NAME:=Omnima EMB-HPM board
+define Profile/HPM
+ NAME:=Omnima HPM
PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2
endef
-define Profile/OMNIEMBHPM/Description
- Package set compatible with the Omnima EMB-HPM board.
+define Profile/HPM/Description
+ Package set compatible with the Omnima HPM board.
endef
-$(eval $(call Profile,OMNIEMBHPM))
+$(eval $(call Profile,HPM))