This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.
Specifications:
- SoC: Amazon-SE
- RAM: 16MB
- Storage: 4MB NOR FLash
- LEDs: Power, Ethernet, DSL (Sync)
- Buttons: 1x Reset Button (not currently supported, will be done)
- 1x Ethernet-Port: 1x RJ45 10/100BaseTX
- 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)
Installation:
- can be done via telnet+tftp or serial console
- default passwords:
- via telnet (root:admin)
- via webinterface http://172.16.1.254:8235/ (admin:coolwhite)
Installation via telnet / tftp:
host: # your own host must have an tftpd daemon, then do this:
host: ifconfig eth0:172 172.16.1.1 up
host: # telnet to allnet modem, root:admin
host: telnet 172.16.1.254
modem: # kill this daemon, it spams your console
modem: killall dsl_cpe_control
modem: # change to some place in ram:
modem: cd /ramdisk/tftp_upload
modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
modem: tftp -g -r uImage 172.16.1.1
modem: # load these extra tools from your tftpd via:
modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
modem: tftp -g -r flashwrite 172.16.1.1
modem: tftp -g -r fw_setenv 172.16.1.1
modem: tftp -g -r fw.conf 172.16.1.1
modem: ln -s fw_setenv fw_printenv
modem: chmod +x *
modem: ./fw_setenv disable_recovery y
modem: ./fw_setenv kernel_addr 0xb0010000
modem: ./flashwrite /dev/mtd/1 uImage 0
Installation via serial line at uboot:
uboot: # erase everything exept bootloader
uboot: protect on
b0000000 +10000; protect on
b03f0000 +10000
uboot: erase all
uboot: # get new firmware via tftp:
uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
uboot: # copy to flash:
uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
uboot: # disable proprietary image checking:
uboot: setenv disable_recovery=y; saveenv
uboot: # reboot with LEDE ;)
uboot: reset
Ethernet works as expected, DSL syncronization does not work properly
currently, I am working on this issue.
Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
board=$(board_name)
case "$board" in
+ALL0333CJ)
+ ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
+ ;;
ARV4525PW)
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
;;
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
;;
+ALL0333CJ)
+ annex="b"
+ lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ucidef_set_interface_lan 'eth0'
+ ;;
+
ARV4510PW)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
--- /dev/null
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+ model = "ALL0333CJ - Allnet ALL0333CJ DSL Modem";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ };
+
+ };
+
+ memory@0 {
+ reg = <0x0 0x1000000>;
+ };
+
+ fpi@b0000000 {
+ etop@E180000 {
+ phy-mode = "mii";
+ };
+ };
+
+ fpi@10000000 {
+ gpio: pinmux@E100B10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ asc {
+ lantiq,groups = "asc";
+ lantiq,function = "asc";
+ };
+ keys_in {
+ lantiq,pins = "io0",/* "io25", */"io29";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <1>;
+ };
+ };
+ };
+
+ localbus@0 {
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "firmware";
+ reg = <0x10000 0x3ef200>;
+ };
+
+ partition@3ff200 {
+ label = "uboot_env";
+ reg = <0x3ff200 0xc00>;
+ read-only;
+ };
+
+ partition@3ffe00 {
+ label = "dummy_bits";
+ reg = <0x3ffe00 0x200>;
+ read-only;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ /* power led: red=off, green=on */
+ power: power {
+ label = "all0333cj:green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ lan: lan {
+ label = "all0333cj:green:lan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ dsl: dsl {
+ label = "all0333cj:green:dsl";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ online_green: online {
+ label = "all0333cj:green:online";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ online_red {
+ label = "all0333cj:red:online";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
ifeq ($(SUBTARGET),ase)
+define Device/ALL0333CJ
+ IMAGE_SIZE := 3700k
+ DEVICE_DTS := ALL0333CJ
+ DEVICE_TITLE := Allnet ALL0333CJ
+ DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
+ kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
+ ltq-adsl-app ppp-mod-pppoe
+endef
+TARGET_DEVICES += ALL0333CJ
+
define Device/DGN1000B
IMAGE_SIZE := 6000k
DEVICE_DTS := DGN1000B
projects / openwrt / staging / kaloz.git / commitdiff