ide-tape: remove struct idetape_id_gcw

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d8b02fb0284cc65e9b66bd5564365b97c8fa8163..aed25590d0580842b4c9651f36a90708492bd71e 100644 (file)
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -498,20 +498,6 @@ enum {
 #define        IDETAPE_ERROR_FILEMARK          102
 #define        IDETAPE_ERROR_EOD               103
 
-/*
- *     The following is used to format the general configuration word of
- *     the ATAPI IDENTIFY DEVICE command.
- */
-struct idetape_id_gcw {        
-       unsigned packet_size            :2;     /* Packet Size */
-       unsigned reserved234            :3;     /* Reserved */
-       unsigned drq_type               :2;     /* Command packet DRQ type */
-       unsigned removable              :1;     /* Removable media */
-       unsigned device_type            :5;     /* Device type */
-       unsigned reserved13             :1;     /* Reserved */
-       unsigned protocol               :2;     /* Protocol type */
-};
-
 /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
 #define IDETAPE_BLOCK_DESCRIPTOR       0
 #define        IDETAPE_CAPABILITIES_PAGE       0x2a
@@ -3254,37 +3240,39 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp)
 }
 
 /*
- *     idetape_identify_device is called to check the contents of the
- *     ATAPI IDENTIFY command results. We return:
+ * check the contents of the ATAPI IDENTIFY command results. We return:
  *
- *     1       If the tape can be supported by us, based on the information
- *             we have so far.
+ * 1 - If the tape can be supported by us, based on the information we have so
+ * far.
  *
- *     0       If this tape driver is not currently supported by us.
+ * 0 - If this tape driver is not currently supported by us.
  */
-static int idetape_identify_device (ide_drive_t *drive)
+static int idetape_identify_device(ide_drive_t *drive)
 {
-       struct idetape_id_gcw gcw;
-       struct hd_driveid *id = drive->id;
+       u8 gcw[2], protocol, device_type, removable, packet_size;
 
        if (drive->id_read == 0)
                return 1;
 
-       *((unsigned short *) &gcw) = id->config;
+       *((unsigned short *) &gcw) = drive->id->config;
 
-       /* Check that we can support this device */
+       protocol        =   (gcw[1] & 0xC0) >> 6;
+       device_type     =    gcw[1] & 0x1F;
+       removable       = !!(gcw[0] & 0x80);
+       packet_size     =    gcw[0] & 0x3;
 
-       if (gcw.protocol != 2)
+       /* Check that we can support this device */
+       if (protocol != 2)
                printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
-                               gcw.protocol);
-       else if (gcw.device_type != 1)
+                               protocol);
+       else if (device_type != 1)
                printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
-                               "to tape\n", gcw.device_type);
-       else if (!gcw.removable)
+                               "to tape\n", device_type);
+       else if (!removable)
                printk(KERN_ERR "ide-tape: The removable flag is not set\n");
-       else if (gcw.packet_size != 0) {
+       else if (packet_size != 0) {
                printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 "
-                               "bytes long\n", gcw.packet_size);
+                               "bytes long\n", packet_size);
        } else
                return 1;
        return 0;
@@ -3409,8 +3397,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
 {
        unsigned long t1, tmid, tn, t;
        int speed;
-       struct idetape_id_gcw gcw;
        int stage_size;
+       u8 gcw[2];
        struct sysinfo si;
        u16 *ctl = (u16 *)&tape->caps[12];
 
@@ -3433,7 +3421,9 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor)
        tape->max_insert_speed = 10000;
        tape->speed_control = 1;
        *((unsigned short *) &gcw) = drive->id->config;
-       if (gcw.drq_type == 1)
+
+       /* Command packet DRQ type */
+       if (((gcw[0] & 0x60) >> 5) == 1)
                set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
 
        tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10;