kirkwood: refresh 6.6 patches

Removed upstream merged:
002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch

Manually refreshed:
100-ib62x0.patch
101-iconnect.patch
102-dockstar.patch
103-iomega-ix2-200.patch
105-linksys-viper-dts.patch
106-goflexnet.patch
107-01-zyxel-nsa3x0-common-nand-partitions.patch
107-03-nsa325.patch
109-pogoplug_v4.patch
110-pogo_e02.patch
111-l-50.patch
112-sheevaplug.patch
113-readynas_duo_v2.patch
114-ctera-c-200-v1.patch
115-nsa310s.patch
116-4i-edge-200.patch
117-netgear_stora.patch
203-blackarmor-nas220.patch

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

diff --git a/target/linux/kirkwood/patches-6.6/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch b/target/linux/kirkwood/patches-6.6/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
deleted file mode 100644 (file)
index 09e7181..0000000
--- a/target/linux/kirkwood/patches-6.6/002-6.2-ARM-dts-kirkwood-Add-Zyxel-NSA310S-board.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From e977a103840c57d72b52cbc8c17f87f86ef9aa8d Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sat, 29 Oct 2022 22:57:38 +0200
-Subject: [PATCH] ARM: dts: kirkwood: Add Zyxel NSA310S board
-
-Zyxel NSA310S is a NAS based on Marvell kirkwood SoC.
-
-Specification:
- - Processor Marvell 88F6702 1 GHz
- - 256MB RAM
- - 128MB NAND
- - 1x GBE LAN port (PHY: Marvell 88E1318)
- - 2x USB 2.0
- - 1x SATA
- - 3x button
- - 7x leds
- - serial on J1 connector (115200 8N1) (GND-NOPIN-RX-TX-VCC)
-
-Tested-by: Tony Dinh <mibodhi@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Acked-by: Adam Baker <linux@baker-net.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile             |   1 +
- arch/arm/boot/dts/kirkwood-nsa310s.dts | 259 +++++++++++++++++++++++++
- 2 files changed, 260 insertions(+)
- create mode 100644 arch/arm/boot/dts/kirkwood-nsa310s.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -356,6 +356,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
-       kirkwood-ns2mini.dtb \
-       kirkwood-nsa310.dtb \
-       kirkwood-nsa310a.dtb \
-+      kirkwood-nsa310s.dtb \
-       kirkwood-nsa320.dtb \
-       kirkwood-nsa325.dtb \
-       kirkwood-openblocks_a6.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,259 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * ZyXEL NSA310S Board Description
-+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
-+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
-+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
-+ * Based upon the board setup file created by Peter Schildmann
-+ */
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+      model = "ZyXEL NSA310S";
-+      compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x10000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8 earlyprintk";
-+              stdout-path = &uart0;
-+      };
-+
-+      gpio_poweroff {
-+              compatible = "gpio-poweroff";
-+              pinctrl-0 = <&pmx_pwr_off>;
-+              pinctrl-names = "default";
-+              gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+      };
-+
-+      keys {
-+              compatible = "gpio-keys";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+              pinctrl-0 = <&pmx_buttons>;
-+              pinctrl-names = "default";
-+
-+              power {
-+                      label = "Power Button";
-+                      linux,code = <KEY_POWER>;
-+                      gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              copy {
-+                      label = "Copy Button";
-+                      linux,code = <KEY_COPY>;
-+                      gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              reset {
-+                      label = "Reset Button";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = <&pmx_leds>;
-+              pinctrl-names = "default";
-+
-+              led-1 {
-+                      function = LED_FUNCTION_DISK_ERR;
-+                      color = <LED_COLOR_ID_RED>;
-+                      gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              led-2 {
-+                      function = LED_FUNCTION_USB;
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "usb-host";
-+              };
-+
-+              led-3 {
-+                      function = LED_FUNCTION_DISK;
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "ata1";
-+              };
-+
-+              led-4 {
-+                      function = LED_FUNCTION_INDICATOR;
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              led-5 {
-+                      function = LED_FUNCTION_INDICATOR;
-+                      color = <LED_COLOR_ID_RED>;
-+                      gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              led-6 {
-+                      function = LED_FUNCTION_STATUS;
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "default-on";
-+              };
-+
-+              led-7 {
-+                      function = LED_FUNCTION_STATUS;
-+                      color = <LED_COLOR_ID_RED>;
-+                      gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-+      usb0_power: regulator@1 {
-+              compatible = "regulator-fixed";
-+              regulator-name = "USB Power";
-+
-+              regulator-min-microvolt = <5000000>;
-+              regulator-max-microvolt = <5000000>;
-+              regulator-always-on;
-+              regulator-boot-on;
-+              gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+      };
-+
-+      sata1_power: regulator@2 {
-+              compatible = "regulator-fixed";
-+              regulator-name = "SATA1 Power";
-+
-+              regulator-min-microvolt = <5000000>;
-+              regulator-max-microvolt = <5000000>;
-+              regulator-always-on;
-+              regulator-boot-on;
-+              gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+      };
-+
-+      thermal-zones {
-+              disk-thermal {
-+                      polling-delay = <20000>;
-+                      polling-delay-passive = <2000>;
-+
-+                      thermal-sensors = <&hdd_temp>;
-+
-+                      trips {
-+                              disk_alert: disk-alert {
-+                                      temperature = <40000>;
-+                                      hysteresis = <5000>;
-+                                      type = "active";
-+                              };
-+                              disk_crit: disk-crit {
-+                                      temperature = <60000>;
-+                                      hysteresis = <2000>;
-+                                      type = "critical";
-+                              };
-+                      };
-+              };
-+      };
-+};
-+
-+
-+&eth0 {
-+      status = "okay";
-+
-+      ethernet0-port@0 {
-+              phy-handle = <&ethphy0>;
-+      };
-+};
-+
-+&i2c0 {
-+      status = "okay";
-+
-+      rtc@68 {
-+              compatible = "htk,ht1382";
-+              reg = <0x68>;
-+      };
-+};
-+
-+&mdio {
-+      status = "okay";
-+
-+      ethphy0: ethernet-phy@1 {
-+              reg = <1>;
-+              phy-mode = "rgmii-id";
-+              marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+                                 <0x1 0x10 0x0 0x1017>,
-+                                 <0x1 0x11 0x0 0x4408>,
-+                                 <0x1 0x16 0x0 0x0>;
-+      };
-+};
-+
-+&nand {
-+      status = "okay";
-+      chip-delay = <35>;
-+
-+      partition@0 {
-+              label = "uboot";
-+              reg = <0x0000000 0x00c0000>;
-+              read-only;
-+      };
-+      partition@c0000 {
-+              label = "uboot_env";
-+              reg = <0x00c0000 0x0080000>;
-+      };
-+      partition@140000 {
-+              label = "ubi";
-+              reg = <0x0140000 0x7ec0000>;
-+      };
-+};
-+
-+&pciec {
-+      status = "okay";
-+};
-+
-+&pcie0 {
-+      status = "okay";
-+};
-+
-+&pinctrl {
-+      pinctrl-names = "default";
-+
-+      pmx_buttons: pmx-buttons {
-+              marvell,pins = "mpp24", "mpp25", "mpp26";
-+              marvell,function = "gpio";
-+      };
-+
-+      pmx_leds: pmx-leds {
-+              marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
-+                                              "mpp28", "mpp29";
-+              marvell,function = "gpio";
-+      };
-+
-+      pmx_power: pmx-power {
-+              marvell,pins = "mpp21", "mpp33";
-+              marvell,function = "gpio";
-+      };
-+
-+      pmx_pwr_off: pmx-pwr-off {
-+              marvell,pins = "mpp27";
-+              marvell,function = "gpio";
-+      };
-+};
-+
-+&rtc {
-+      status = "disabled";
-+};
-+
-+&sata {
-+      status = "okay";
-+      nr-ports = <1>;
-+      #address-cells = <1>;
-+      #size-cells = <0>;
-+
-+      hdd_temp: sata-port@0 {
-+              reg = <0>;
-+              #thermal-sensor-cells = <0>;
-+      };
-+};
-+
-+&uart0 {
-+      status = "okay";
-+};

diff --git a/target/linux/kirkwood/patches-6.6/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch b/target/linux/kirkwood/patches-6.6/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
deleted file mode 100644 (file)
index cde2815..0000000
--- a/target/linux/kirkwood/patches-6.6/003-6.5-ARM-dts-kirkwood-Add-Endian-4i-Edge-200-board.patch
+++ /dev/null
@@ -1,249 +0,0 @@
-From 5668d088ee4ea05db9daaae0645d1d1f579b20f9 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Mon, 3 Oct 2022 09:34:43 +0200
-Subject: ARM: dts: kirkwood: Add Endian 4i Edge 200 board
-
-Add Endian 4i Edge 200 is 5-port firewall.
-It have also clone: Endian UTM Mini (The same hardware, with added WLAN
-card).
-
-Hardware:
-  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
-  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
-  - NAND Flash: 512MB (Micron 29F4G08AAC)
-  - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
-  - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
-  - Storage: MicroSD Slot
-  - MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
-          (Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
-  - USB: 1x USB 2.0 port
-  - Console: RJ-45 port
-  - LEDs: 3x GPIO controlled
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/Makefile                 |   1 +
- arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++++++++++
- 2 files changed, 206 insertions(+)
- create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -300,6 +300,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
-       keystone-k2g-evm.dtb \
-       keystone-k2g-ice.dtb
- dtb-$(CONFIG_MACH_KIRKWOOD) += \
-+      kirkwood-4i-edge-200.dtb \
-       kirkwood-b3.dtb \
-       kirkwood-blackarmor-nas220.dtb \
-       kirkwood-c200-v1.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
-@@ -0,0 +1,205 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Endian 4i Edge 200 Board Description
-+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
-+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+      model = "Endian 4i Edge 200";
-+      compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x20000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8";
-+              stdout-path = &uart0;
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = <&pmx_led>;
-+              pinctrl-names = "default";
-+
-+              led-1 {
-+                      function = LED_FUNCTION_SD;
-+                      color = <LED_COLOR_ID_AMBER>;
-+                      gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+                      linux,default-trigger = "mmc0";
-+              };
-+
-+              led-2 {
-+                      function = LED_FUNCTION_STATUS;
-+                      color = <LED_COLOR_ID_AMBER>;
-+                      gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              led-3 {
-+                      function = LED_FUNCTION_STATUS;
-+                      color = <LED_COLOR_ID_GREEN>;
-+                      gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+};
-+
-+&eth0 {
-+      status = "okay";
-+};
-+
-+&eth0port {
-+      speed = <1000>;
-+      duplex = <1>;
-+};
-+
-+&eth1 {
-+      status = "okay";
-+};
-+
-+&eth1port {
-+      phy-handle = <&ethphyb>;
-+};
-+
-+&mdio {
-+      status = "okay";
-+
-+      ethphyb: ethernet-phy@b {
-+              reg = <0x0b>;
-+
-+              marvell,reg-init =
-+                      /* link-activity, bi-color mode 4 */
-+                      <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
-+      };
-+
-+      switch0: switch@11 {
-+              compatible = "marvell,mv88e6085";
-+              reg = <0x11>;
-+
-+              ports {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+
-+                      port@0 {
-+                              reg = <0>;
-+                              label = "port1";
-+                      };
-+
-+                      port@1 {
-+                              reg = <1>;
-+                              label = "port2";
-+                      };
-+
-+                      port@2 {
-+                              reg = <2>;
-+                              label = "port3";
-+                      };
-+
-+                      port@3 {
-+                              reg = <3>;
-+                              label = "port4";
-+                      };
-+
-+                      port@5 {
-+                              reg = <5>;
-+                              phy-mode = "rgmii-id";
-+                              ethernet = <&eth0port>;
-+
-+                              fixed-link {
-+                                      speed = <1000>;
-+                                      full-duplex;
-+                              };
-+                      };
-+              };
-+      };
-+};
-+
-+&nand {
-+      status = "okay";
-+      pinctrl-0 = <&pmx_nand>;
-+      pinctrl-names = "default";
-+
-+      partition@0 {
-+              label = "u-boot";
-+              reg = <0x00000000 0x000a0000>;
-+              read-only;
-+      };
-+
-+      partition@a0000 {
-+              label = "u-boot-env";
-+              reg = <0x000a0000 0x00060000>;
-+              read-only;
-+      };
-+
-+      partition@100000 {
-+              label = "kernel";
-+              reg = <0x00100000 0x00400000>;
-+      };
-+
-+      partition@500000 {
-+              label = "ubi";
-+              reg = <0x00500000 0x1fb00000>;
-+      };
-+};
-+
-+&pciec {
-+      status = "okay";
-+};
-+
-+&pcie0 {
-+      status = "okay";
-+};
-+
-+&pinctrl {
-+      pinctrl-0 = <&pmx_sysrst>;
-+      pinctrl-names = "default";
-+
-+      pmx_sysrst: pmx-sysrst {
-+              marvell,pins = "mpp6";
-+              marvell,function = "sysrst";
-+      };
-+
-+      pmx_sdio_cd: pmx-sdio-cd {
-+              marvell,pins = "mpp28";
-+              marvell,function = "gpio";
-+      };
-+
-+      pmx_led: pmx-led {
-+              marvell,pins = "mpp34", "mpp35", "mpp49";
-+              marvell,function = "gpio";
-+      };
-+};
-+
-+&rtc {
-+      status = "okay";
-+};
-+
-+&sata_phy0 {
-+      status = "disabled";
-+};
-+
-+&sata_phy1 {
-+      status = "disabled";
-+};
-+
-+&sdio {
-+      pinctrl-0 = <&pmx_sdio_cd>;
-+      pinctrl-names = "default";
-+      status = "okay";
-+      cd-gpios = <&gpio0 28 9>;
-+};
-+
-+&uart0 {
-+      status = "okay";
-+};
-+
-+&usb0 {
-+      status = "okay";
-+};

diff --git a/target/linux/kirkwood/patches-6.6/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch b/target/linux/kirkwood/patches-6.6/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
deleted file mode 100644 (file)
index fd7adc3..0000000
--- a/target/linux/kirkwood/patches-6.6/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 8aea8659a5f3ae8dc63c9f632ce1f676a1483556 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Fri, 7 Apr 2023 17:17:20 +0200
-Subject: [PATCH] ARM: dts: kirkwood: Add missing phy-mode and fixed links
-
-The DSA framework has got more picky about always having a phy-mode
-for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
-switch to impose the RGMII delays.
-
-Additionally, the cpu label has never actually been used in the
-binding, so remove it.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm/boot/dts/kirkwood-dir665.dts          | 3 ++-
- arch/arm/boot/dts/kirkwood-l-50.dts            | 2 +-
- arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 3 ++-
- arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 3 ++-
- arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 2 +-
- 5 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/kirkwood-dir665.dts
-+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
-@@ -232,7 +232,7 @@
- 
-                       port@6 {
-                               reg = <6>;
--                              label = "cpu";
-+                              phy-mode = "rgmii-id";
-                               ethernet = <&eth0port>;
-                               fixed-link {
-                                       speed = <1000>;
-@@ -251,6 +251,7 @@
-       ethernet0-port@0 {
-               speed = <1000>;
-               duplex = <1>;
-+              phy-mode = "rgmii";
-       };
- };
- 
---- a/arch/arm/boot/dts/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
-@@ -254,7 +254,6 @@
- 
-                       port@6 {
-                               reg = <6>;
--                              label = "cpu";
-                               phy-mode = "rgmii-id";
-                               ethernet = <&eth1port>;
-                               fixed-link {
-@@ -330,6 +329,7 @@
-       ethernet1-port@0 {
-               speed = <1000>;
-               duplex = <1>;
-+              phy-mode = "rgmii";
-       };
- };
- 
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -198,7 +198,7 @@
- 
-                       port@5 {
-                               reg = <5>;
--                              label = "cpu";
-+                              phy-mode = "rgmii-id";
-                               ethernet = <&eth0port>;
-                               fixed-link {
-                                       speed = <1000>;
-@@ -221,6 +221,7 @@
-       ethernet0-port@0 {
-               speed = <1000>;
-               duplex = <1>;
-+              phy-mode = "rgmii";
-       };
- };
- 
---- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
-+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
-@@ -149,7 +149,7 @@
- 
-                       port@5 {
-                               reg = <5>;
--                              label = "cpu";
-+                              phy-mode = "rgmii-id";
-                               ethernet = <&eth0port>;
-                               fixed-link {
-                                       speed = <1000>;
-@@ -166,6 +166,7 @@
-       ethernet0-port@0 {
-               speed = <1000>;
-               duplex = <1>;
-+              phy-mode = "rgmii";
-       };
- };
- 
---- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
-@@ -105,7 +105,7 @@
- 
-                       port@5 {
-                               reg = <5>;
--                              label = "cpu";
-+                              phy-mode = "rgmii-id";
-                               ethernet = <&eth0port>;
-                               fixed-link {
-                                       speed = <1000>;

diff --git a/target/linux/kirkwood/patches-6.6/005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch b/target/linux/kirkwood/patches-6.6/005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch
deleted file mode 100644 (file)
index cd83839..0000000
--- a/target/linux/kirkwood/patches-6.6/005-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From b3f1a164c7f742503dc7159011f7ad6b092b660e Mon Sep 17 00:00:00 2001
-From: Greg Ungerer <gerg@kernel.org>
-Date: Fri, 24 Nov 2023 14:15:28 +1000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix marvell 6350 switch probing
-
-As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
-be filled") Marvell 88e6350 switches fail to be probed:
-
-    ...
-    mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
-    mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces
-    error creating PHYLINK: -22
-    mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22
-    ...
-
-The problem stems from the use of mv88e6185_phylink_get_caps() to get
-the device capabilities. Create a new dedicated phylink_get_caps for the
-6351 family (which the 6350 is one of) to properly support their set of
-capabilities.
-
-According to chip.h the 6351 switch family includes the 6171, 6175, 6350
-and 6351 switches, so update each of these to use the correct
-phylink_get_caps.
-
-Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
-Signed-off-by: Greg Ungerer <gerg@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++----
- 1 file changed, 16 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -652,6 +652,18 @@ static void mv88e6250_phylink_get_caps(s
-       config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
- }
- 
-+static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
-+                                     struct phylink_config *config)
-+{
-+      unsigned long *supported = config->supported_interfaces;
-+
-+      /* Translate the default cmode */
-+      mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
-+
-+      config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
-+                                 MAC_1000FD;
-+}
-+
- static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
- {
-       u16 reg, val;
-@@ -4498,7 +4510,7 @@ static const struct mv88e6xxx_ops mv88e6
-       .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
-       .stu_getnext = mv88e6352_g1_stu_getnext,
-       .stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--      .phylink_get_caps = mv88e6185_phylink_get_caps,
-+      .phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6172_ops = {
-@@ -4599,7 +4611,7 @@ static const struct mv88e6xxx_ops mv88e6
-       .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
-       .stu_getnext = mv88e6352_g1_stu_getnext,
-       .stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--      .phylink_get_caps = mv88e6185_phylink_get_caps,
-+      .phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6176_ops = {
-@@ -5256,7 +5268,7 @@ static const struct mv88e6xxx_ops mv88e6
-       .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
-       .stu_getnext = mv88e6352_g1_stu_getnext,
-       .stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--      .phylink_get_caps = mv88e6185_phylink_get_caps,
-+      .phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6351_ops = {
-@@ -5302,7 +5314,7 @@ static const struct mv88e6xxx_ops mv88e6
-       .stu_loadpurge = mv88e6352_g1_stu_loadpurge,
-       .avb_ops = &mv88e6352_avb_ops,
-       .ptp_ops = &mv88e6352_ptp_ops,
--      .phylink_get_caps = mv88e6185_phylink_get_caps,
-+      .phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6352_ops = {

diff --git a/target/linux/kirkwood/patches-6.6/100-ib62x0.patch b/target/linux/kirkwood/patches-6.6/100-ib62x0.patch
index 0637c24b631867111ead70b8f21d0b98576b5cea..1ee05f837f85411b336221076651cf929da1ea4d 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/100-ib62x0.patch
+++ b/target/linux/kirkwood/patches-6.6/100-ib62x0.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
 @@ -6,7 +6,14 @@
  
  / {

diff --git a/target/linux/kirkwood/patches-6.6/101-iconnect.patch b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
index 935e2dfcf5486385bc821e3deaaf0ca628498631..cd1813d0a6dc10f229c6d7c929544e9db9f208ba 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
 @@ -8,6 +8,13 @@
        model = "Iomega Iconnect";
        compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/102-dockstar.patch b/target/linux/kirkwood/patches-6.6/102-dockstar.patch
index 127f84962c195ee63e69db988dfc72c993c428c5..e97f15cab4125bc1fb16ca0f65fadda9b735c418 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/102-dockstar.patch
+++ b/target/linux/kirkwood/patches-6.6/102-dockstar.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
 @@ -8,6 +8,13 @@
        model = "Seagate FreeAgent Dockstar";
        compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch
index db04c09f760eed2ea930760f31fe2005a9004b97..0251a10600bf109eafc76c2077be0f802c151891 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch
+++ b/target/linux/kirkwood/patches-6.6/103-iomega-ix2-200.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
 @@ -8,6 +8,13 @@
        model = "Iomega StorCenter ix2-200";
        compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch
index b1604ec92cf4382a82a0c7ebc9911f6b2bd1cb6b..6eb83003a28e8199e8597809a0a5cf256554b86c 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch
+++ b/target/linux/kirkwood/patches-6.6/105-linksys-viper-dts.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
 @@ -24,6 +24,10 @@
        };
  

diff --git a/target/linux/kirkwood/patches-6.6/106-goflexnet.patch b/target/linux/kirkwood/patches-6.6/106-goflexnet.patch
index 82cf90841e30b7f05ce9ae9dbe290bd7883222bc..b664009b85696432efccdb57622c6907e7de76b3 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/106-goflexnet.patch
+++ b/target/linux/kirkwood/patches-6.6/106-goflexnet.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
 @@ -8,6 +8,13 @@
        model = "Seagate GoFlex Net";
        compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch
index df654033fd8cf90ef8ebd56fd3e03174ec145a8f..a73d82b89279979729774502260cccad0d15c1b3 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ b/target/linux/kirkwood/patches-6.6/107-01-zyxel-nsa3x0-common-nand-partitions.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
 @@ -112,40 +112,16 @@
  
        partition@0 {

diff --git a/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch b/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch
index 374c0895a99e68577dc987d9dfcf53bb1027ab8a..b3f19924db0b105a017a626668106edc9d05b46b 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch
+++ b/target/linux/kirkwood/patches-6.6/107-03-nsa325.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa325.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
 @@ -15,6 +15,13 @@
        model = "ZyXEL NSA325";
        compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch
index 4273eb9af19e83cbaf66bbd5a5db0f354326383c..ed7e4e4ff092b4e750c3081f539f47b78cc0f4cd 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-6.6/109-pogoplug_v4.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
 @@ -18,12 +18,20 @@
        compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
                     "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch b/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
index fc384d3521f960c6add3bb155457412342891994..21b929dda7f41bb62dafc51eb1b18b20078f441e 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
+++ b/target/linux/kirkwood/patches-6.6/110-pogo_e02.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
 @@ -20,6 +20,13 @@
        compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
                     "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/111-l-50.patch b/target/linux/kirkwood/patches-6.6/111-l-50.patch
index bc933cb610b5cc0114d1dc668e42530fe55ab5b3..08897d4faeab4e6fa6e1f437f74c5f4eb087d356 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/111-l-50.patch
+++ b/target/linux/kirkwood/patches-6.6/111-l-50.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-l-50.dts
-+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
 @@ -18,6 +18,13 @@
                reg = <0x00000000 0x20000000>;
        };

diff --git a/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch b/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch
index d1ff9884a068f191707ef3b4a534a0783c987d04..e8e83bdbbaa836cdeb9357de2c7ba58e7c3a4753 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch
+++ b/target/linux/kirkwood/patches-6.6/112-sheevaplug.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
++++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
 @@ -78,13 +78,8 @@
        };
  
@@ -16,8 +16,8 @@
        };
  };
  
---- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
-+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
 @@ -13,6 +13,13 @@
        model = "Globalscale Technologies SheevaPlug";
        compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch
index c6452c55a37cde95a0b9d5b1ce2b3097982bf96c..9cb2ad102cc3ead5f2eca6665df075b28b678b52 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch
+++ b/target/linux/kirkwood/patches-6.6/113-readynas_duo_v2.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
 @@ -19,6 +19,13 @@
                reg = <0x00000000 0x10000000>;
        };

diff --git a/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch b/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch
index eb62e1a5ed43f032711c45fff4fe9e32c39f2cce..7e930896168ceec752fcc469a65cf29f7e623deb 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch
+++ b/target/linux/kirkwood/patches-6.6/114-ctera-c-200-v1.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
-+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
 @@ -14,6 +14,14 @@
        model = "Ctera C200 V1";
        compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/115-nsa310s.patch b/target/linux/kirkwood/patches-6.6/115-nsa310s.patch
index 4c6e08f49cbcfc7ac48ce0186301f9f843ee6055..2f43dd960c1af496d7f5eb6036cd8a842997651f 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/115-nsa310s.patch
+++ b/target/linux/kirkwood/patches-6.6/115-nsa310s.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-nsa310s.dts
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
 @@ -16,6 +16,13 @@
        model = "ZyXEL NSA310S";
        compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";

diff --git a/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch b/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch
index ffc46c29dc863f4bdb4b62c6541a7be1544ab5fb..62a307409731702696ebc801393ce7d15a58c289 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch
+++ b/target/linux/kirkwood/patches-6.6/116-4i-edge-200.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
-+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
 @@ -20,6 +20,13 @@
                reg = <0x00000000 0x20000000>;
        };

diff --git a/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch b/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch
index c7518933b201bc13ccf124fddfafb5c5f655b0c2..db0bdb4228ffb53b2689b7996504a6607f306ec4 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch
+++ b/target/linux/kirkwood/patches-6.6/117-netgear_stora.patch
@@ -1,6 +1,6 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -375,6 +375,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+--- a/arch/arm/boot/dts/marvell/Makefile
++++ b/arch/arm/boot/dts/marvell/Makefile
+@@ -157,6 +157,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
        kirkwood-rs411.dtb \
        kirkwood-sheevaplug.dtb \
        kirkwood-sheevaplug-esata.dtb \

diff --git a/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch
index e04a28206a20007483c16e2bf12d5a1025127a93..8ceac179cb25ceb27e74e03258ee913aae20258b 100644 (file)
--- a/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch
+++ b/target/linux/kirkwood/patches-6.6/203-blackarmor-nas220.patch
@@ -1,5 +1,5 @@
---- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
-+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+--- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
 @@ -17,6 +17,13 @@
        compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
                     "marvell,kirkwood";