ramips: add support for Xiaomi MiWiFi Mini devices

This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio
wireless router based on the MediaTek MT7620a SoC.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44238

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index af3dddcc58d29720c8efce940ebb53f4c16621d9..cfc782ed07ffb7b2a5d5a1ed5b887973d68d6a08 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -231,6 +231,9 @@ case $board in
        wt3020)
                ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
                ;;
+       xiaomi-miwifi-mini)
+               ucidef_set_led_default "power" "power" "xiaomi:red:status" "1"
+               ;;
        y1 |\
        y1s)
                ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7724c3e40a198922cd807c97a1f0a7c0dbeac2bd..f298aa47afce22144cfbdf8b134eac02ce6f2dcb 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -130,6 +130,7 @@ ramips_setup_interfaces()
        wsr-600 | \
        wsr-1166 | \
        wt1520 | \
+       xiaomi-miwifi-mini |\
        y1)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 808177bc0d4254a8d2375abfbf5a716fe80e1e3f..e9b39970ca3646b7849bd0b56c8311808f256fb5 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -210,6 +210,9 @@ get_status_led() {
        xdxrn502j)
                status_led="xdxrn502j:green:power"
                ;;
+       xiaomi-mini)
+               status_led="xiaomi:red:status"
+               ;;
        f7c027)
                status_led="belkin:orange:status"
                ;;

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index f43725ef9dae6f7d9a945974b42a6b62748fb9af..4527414e6e6cdf22293ff6088af1f00624459292 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -367,6 +367,9 @@ ramips_board_detect() {
        *"Wansview NCS601W")
                name="ncs601w"
                ;;
+       *"Xiaomi MiWiFi Mini")
+               name="xiaomi-miwifi-mini"
+               ;;
        *"Sercomm NA930")
                name="na930"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0dfdf9de86163b181600d84a5b02868567d09ce1..356a0856c9ab52cd6d4cf2d09bd65221b25ec7bd 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -110,6 +110,7 @@ platform_check_image() {
        wt3020 |\
        x5 |\
        x8 |\
+       xiaomi-miwifi-mini |\
        y1 |\
        y1s |\
        zbt-wa05)

diff --git a/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts b/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts
new file mode 100644 (file)
index 0000000..fda3325
--- /dev/null
+++ b/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts
@@ -0,0 +1,148 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "XIAOMI MIWIFI MINI", "ralink,mt7620a-soc";
+       model = "Xiaomi MiWiFi Mini";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       palmbus@10000000 {
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "w25q128";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "w25q128";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0xf80000>;
+                               };
+
+                               partition@fd0000 {
+                                       label = "crash";
+                                       reg = <0xfd0000 0x10000>;
+                               };
+
+                               partition@fe0000 {
+                                       label = "reserved";
+                                       reg = <0xfe0000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@ff0000 {
+                                       label = "Bdata";
+                                       reg = <0xff0000 0x10000>;
+                               };
+                       };
+               };
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+               mtd-mac-address = <&factory 0x4>;
+               ralink,port-map = "llllw";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       pcie@10140000 {
+               status = "okay";
+
+               pcie0 {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "rgmii1";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               blue {
+                       label = "xiaomi:blue:status";
+                       gpios = <&gpio1 0 1>;
+               };
+
+               yellow {
+                       label = "xiaomi:yellow:status";
+                       gpios = <&gpio1 2 1>;
+               };
+
+               red {
+                       label = "xiaomi:red:status";
+                       gpios = <&gpio1 5 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 0>;
+                       linux,code = <0x198>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index d35c4206b89f1468329c8101b43f7a1ec4ea29d0..73637300fdca1cf6f01d4b0c49636fc26ee8da5b 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -858,6 +858,7 @@ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-
 Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
 Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
+Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI)
 Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
 Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
 
@@ -886,6 +887,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/WR8305RT,$(1))
        $(call Image/Build/Profile/WRTNODE,$(1))
        $(call Image/Build/Profile/WT3020,$(1))
+       $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
        $(call Image/Build/Profile/ZBT-WA05,$(1))
        $(call Image/Build/Profile/ArcherC20i,$(1))
 endef

diff --git a/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk b/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk
new file mode 100644 (file)
index 0000000..47819b2
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/XIAOMI-MIWIFI-MINI
+ NAME:=Xiaomi MiWiFi Mini
+ PACKAGES:=\
+       kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci \
+       kmod-mt76
+endef
+
+define Profile/XIAOMI-MIWIFI-MINI/Description
+ Support for Xiaomi MiWiFi Mini routers
+endef
+$(eval $(call Profile,XIAOMI-MIWIFI-MINI))