--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "iEi Puzzle-M901";
+ compatible = "iei,puzzle-m901",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy5 2>;
+ managed = "in-band-status";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+ status = "okay";
+ num-lanes = <2>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition@1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition@200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition@3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy@5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ managed = "in-band-status";
+};
+
+&cp1_sata0 {
+ status = "okay";
+ sata-port@1 {
+ status = "okay";
+ phys = <&cp1_comphy0 1>;
+ };
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ cp1_sfp_pins: sfp-pins {
+ marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "iEi Puzzle-M902";
+ compatible = "iei,puzzle-m902",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cp1_i2c0;
+ i2c1 = &cp0_i2c0;
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ gpio3 = &cp1_gpio1;
+ gpio4 = &cp1_gpio2;
+ gpio5 = &cp2_gpio1;
+ gpio6 = &cp2_gpio2;
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp0_eth1;
+ ethernet2 = &cp0_eth2;
+ ethernet3 = &cp1_eth0;
+ ethernet4 = &cp1_eth1;
+ ethernet5 = &cp1_eth2;
+ ethernet6 = &cp2_eth0;
+ ethernet7 = &cp2_eth1;
+ ethernet8 = &cp2_eth2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ serial1 = &cp0_uart0;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus0>;
+ };
+
+ cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "cp2-xhci1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cp2_reg_usb3_vbus1>;
+ };
+
+ cp2_sfp_eth0: sfp-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp2_sfpp0_i2c>;
+ los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&cp0_uart0 {
+ status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ bus-width = <8>;
+ status = "okay";
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+ status = "okay";
+};
+
+&cp0_xmdio {
+ status = "okay";
+ cp0_nbaset_phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp0_nbaset_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp0_nbaset_phy2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp0_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp0_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp0_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
+
+&cp0_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ wakeup-source;
+ };
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_sata0 {
+ status = "okay";
+ sata-port@1 {
+ status = "okay";
+ phys = <&cp0_comphy0 1>;
+ };
+};
+
+&cp0_pcie2 {
+ status = "okay";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ phys = <&cp0_comphy5 2>;
+};
+
+/* U55 */
+&cp0_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_spi0_pins>;
+ reg = <0x700680 0x50>, /* control */
+ <0x2000000 0x1000000>; /* CS0 */
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <40000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x1f0000>;
+ };
+ partition@1f0000 {
+ label = "U-Boot ENV Factory";
+ reg = <0x1f0000 0x10000>;
+ };
+ partition@200000 {
+ label = "Reserved";
+ reg = <0x200000 0x1f0000>;
+ };
+ partition@3f0000 {
+ label = "U-Boot ENV";
+ reg = <0x3f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp0_i2c0_pins: cp0-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_i2c1_pins: cp0-i2c-pins-1 {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+ marvell,pins = "mpp0", "mpp1", "mpp2",
+ "mpp3", "mpp4", "mpp5",
+ "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+ cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+ marvell,pins = "mpp44", "mpp45", "mpp46",
+ "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52",
+ "mpp53", "mpp54", "mpp55";
+ marvell,function = "ge1";
+ };
+ cp0_spi0_pins: cp0-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ };
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ phys = <&cp0_comphy3 1>;
+ phy-names = "usb";
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME cp1
+#define CP11X_BASE f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f4600000
+#define CP11X_PCIE1_BASE f4620000
+#define CP11X_PCIE2_BASE f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+ status = "okay";
+};
+
+&cp1_xmdio {
+ status = "okay";
+ cp1_nbaset_phy0: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp1_nbaset_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp1_nbaset_phy2: ethernet-phy@5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp1_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp1_gpio1 {
+ status = "okay";
+};
+
+&cp1_gpio2 {
+ status = "okay";
+};
+
+&cp1_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+ cp1_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp1_i2c0_pins: cp1-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp1_spi0_pins: cp1-spi-pins-0 {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+ };
+};
+
+/*
+ * Instantiate the second connected CP115
+ */
+
+#define CP11X_NAME cp2
+#define CP11X_BASE f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE f6600000
+#define CP11X_PCIE1_BASE f6620000
+#define CP11X_PCIE2_BASE f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+ status = "okay";
+};
+
+&cp2_ethernet {
+ status = "okay";
+};
+
+&cp2_xmdio {
+ status = "okay";
+ cp2_nbaset_phy0: ethernet-phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <2>;
+ };
+ cp2_nbaset_phy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ cp2_nbaset_phy2: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ phys = <&cp2_comphy2 0>;
+ managed = "in-band-status";
+};
+
+&cp2_eth1 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy4 1>;
+ managed = "in-band-status";
+};
+
+&cp2_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp2_comphy1 2>;
+ managed = "in-band-status";
+};
+
+&cp2_gpio1 {
+ status = "okay";
+};
+
+&cp2_gpio2 {
+ status = "okay";
+};
+
+&cp2_i2c0 {
+ clock-frequency = <100000>;
+ /* SLM-1521-V2 - U3 */
+ i2c-mux@72 {
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ cp2_sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* U12 */
+ cp2_module_expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+ };
+ };
+};
+
+&cp2_syscon0 {
+ cp2_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+ cp2_i2c0_pins: cp2-i2c-pins-0 {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ };
+};
projects / openwrt / staging / ynezz.git / commitdiff