Staging: sep: kick out various fields we can prove are not needed
authorAlan Cox <alan@linux.intel.com>
Fri, 14 Aug 2009 14:42:18 +0000 (15:42 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 15 Sep 2009 19:02:15 +0000 (12:02 -0700)
#1: sep->cache_addr is assigned to sep->rar_addr and never changed
    sep->rar_addr is never assigned after this point

#2: sep->cache_bus ditto for sep->rar_bus

#3  sep->rar_region_addr is assigned but necer used

#4  sep->io_addr is in fact private to the probe function and
    the same as the reg_addr

#5  The remainig sep->io fields are in fact function locals

#6  sep->message_shared_area is assigned once from sep->shared_area
    sep->shared_area does not then change

#7  sep->shared_addr and sep->shared_area_addr are the same thing, ditto
    for the bus addresses.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/sep/sep_dev.h
drivers/staging/sep/sep_driver.c

index d4f0a69e0fcb606c414290add421075a00b3a504..9200524bb64d2cbff10bac8020f70043aa5a7b9a 100644 (file)
@@ -34,30 +34,23 @@ struct sep_device {
 
        unsigned long in_use;
 
-       unsigned long io_bus;
-       unsigned long io_end_bus;
-       unsigned long io_memory_size;
-       void __iomem *io_addr;
+       /* address of the shared memory allocated during init for SEP driver
+          (coherent alloc) */
+       void *shared_addr;
+       /* the physical address of the shared area */
+       dma_addr_t shared_bus;
 
-       /* restricted access region */
+       /* restricted access region (coherent alloc) */
        dma_addr_t rar_bus;
        void *rar_addr;
-
-       /* shared memory region */
-       dma_addr_t shared_bus;
-       void *shared_addr;
-
-       /* firmware regions */
-       dma_addr_t cache_bus;
+       /* firmware regions: cache is at rar_addr */
        unsigned long cache_size;
-       void *cache_addr;
 
+       /* follows the cache */
        dma_addr_t resident_bus;
        unsigned long resident_size;
        void *resident_addr;
 
-       void *rar_region_addr;
-
        /* start address of the access to the SEP registers from driver */
        void __iomem *reg_addr;
        /* transaction counter that coordinates the transactions between SEP and HOST */
@@ -88,13 +81,6 @@ struct sep_device {
        /* pointer to the workqueue that handles the flow done interrupts */
        struct workqueue_struct *flow_wq;
 
-       /* address of the shared memory allocated during init for SEP driver */
-       void *shared_area;
-       /* the physical address of the shared area */
-       dma_addr_t shared_area_bus;
-
-       /* Message Shared Area start address - will be allocated during init */
-       void *message_shared_area_addr;
 };
 
 static struct sep_device *sep_dev;
index 51c005038541838a3738d8c227098b0d01d88d80..73f20c4bee948f3411a3005857cd5b9d8889606e 100644 (file)
@@ -188,10 +188,6 @@ static int sep_load_firmware(struct sep_device *sep)
        edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr);
        edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus);
 
-       sep->rar_region_addr = sep->rar_addr;
-       sep->cache_bus = sep->rar_bus;
-       sep->cache_addr = sep->rar_addr;
-
        /* load cache */
        error = request_firmware(&fw, cache_name, &sep->pdev->dev);
        if (error) {
@@ -200,12 +196,12 @@ static int sep_load_firmware(struct sep_device *sep)
        }
        edbg("SEP Driver:cache %08Zx@%p\n", fw->size, (void *) fw->data);
 
-       memcpy(sep->cache_addr, (void *)fw->data, fw->size);
+       memcpy(sep->rar_addr, (void *)fw->data, fw->size);
        sep->cache_size = fw->size;
        release_firmware(fw);
 
-       sep->resident_bus = sep->cache_bus + sep->cache_size;
-       sep->resident_addr = sep->cache_addr + sep->cache_size;
+       sep->resident_bus = sep->rar_bus + sep->cache_size;
+       sep->resident_addr = sep->rar_addr + sep->cache_size;
 
        /* load resident */
        error = request_firmware(&fw, res_name, &sep->pdev->dev);
@@ -221,7 +217,7 @@ static int sep_load_firmware(struct sep_device *sep)
 
        edbg("sep: resident v %p b %08llx cache v %p b %08llx\n",
                sep->resident_addr, (unsigned long long)sep->resident_bus,
-               sep->cache_addr, (unsigned long long)sep->cache_bus);
+               sep->rar_addr, (unsigned long long)sep->rar_bus);
        return 0;
 }
 
@@ -245,10 +241,8 @@ static int sep_map_and_alloc_shared_area(struct sep_device *sep,
                edbg("sep_driver :shared memory dma_alloc_coherent failed\n");
                return -ENOMEM;
        }
-       sep->shared_area = sep->shared_addr;
        /* set the bus address of the shared area */
-       sep->shared_area_bus = sep->shared_bus;
-       edbg("sep: shared_area %ld bytes @%p (bus %08llx)\n",
+       edbg("sep: shared_addr %ld bytes @%p (bus %08llx)\n",
                size, sep->shared_addr, (unsigned long long)sep->shared_bus);
        return 0;
 }
@@ -264,17 +258,17 @@ static int sep_map_and_alloc_shared_area(struct sep_device *sep,
 static void sep_unmap_and_free_shared_area(struct sep_device *sep, int size)
 {
        dma_free_coherent(&sep->pdev->dev, size,
-                               sep->shared_area, sep->shared_area_bus);
+                               sep->shared_addr, sep->shared_bus);
 }
 
 /**
- *     sep_shared_area_virt_to_bus     -       convert bus/virt addresses
+ *     sep_shared_virt_to_bus  -       convert bus/virt addresses
  *
  *     Returns the bus address inside the shared area according
  *     to the virtual address.
  */
 
-static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
+static dma_addr_t sep_shared_virt_to_bus(struct sep_device *sep,
                                                void *virt_address)
 {
        dma_addr_t pa = sep->shared_bus + (virt_address - sep->shared_addr);
@@ -283,13 +277,13 @@ static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
 }
 
 /**
- *     sep_shared_area_bus_to_virt     -       convert bus/virt addresses
+ *     sep_shared_bus_to_virt  -       convert bus/virt addresses
  *
  *     Returns virtual address inside the shared area according
  *     to the bus address.
  */
 
-static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
+static void *sep_shared_bus_to_virt(struct sep_device *sep,
                                                dma_addr_t bus_address)
 {
        return sep->shared_addr + (bus_address - sep->shared_bus);
@@ -391,10 +385,10 @@ static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
                return -EAGAIN;
        }
 
-       edbg("SEP Driver:sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
+       edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
 
        /* get bus address */
-       bus_addr = sep->shared_area_bus;
+       bus_addr = sep->shared_bus;
 
        edbg("SEP Driver: phys_addr is %08llx\n", (unsigned long long)bus_addr);
 
@@ -429,7 +423,7 @@ static unsigned int sep_poll(struct file *filp, poll_table * wait)
                retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
 
                for (count = 0; count < 10 * 4; count += 4)
-                       edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
+                       edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
        }
 
        sep->reply_ct++;
@@ -445,10 +439,10 @@ static unsigned int sep_poll(struct file *filp, poll_table * wait)
        /* check if the data is ready */
        if (sep->send_ct == sep->reply_ct) {
                for (count = 0; count < 12 * 4; count += 4)
-                       edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
+                       edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
 
                for (count = 0; count < 10 * 4; count += 4)
-                       edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + 0x1800 + count)));
+                       edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + 0x1800 + count)));
 
                retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
                edbg("retval is %lu\n", retval);
@@ -481,18 +475,18 @@ static int sep_set_time(struct sep_device *sep, unsigned long *address_ptr, unsi
        do_gettimeofday(&time);
 
        /* set value in the SYSTEM MEMORY offset */
-       time_addr = sep->message_shared_area_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
+       time_addr = sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
 
        time_addr[0] = SEP_TIME_VAL_TOKEN;
        time_addr[1] = time.tv_sec;
 
        edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec);
        edbg("SEP Driver:time_addr is %p\n", time_addr);
-       edbg("SEP Driver:sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
+       edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
 
        /* set the output parameters if needed */
        if (address_ptr)
-               *address_ptr = sep_shared_area_virt_to_bus(sep, time_addr);
+               *address_ptr = sep_shared_virt_to_bus(sep, time_addr);
 
        if (time_in_sec_ptr)
                *time_in_sec_ptr = time.tv_sec;
@@ -517,7 +511,7 @@ static void sep_send_command_handler(struct sep_device *sep)
        flush_cache_all();
 
        for (count = 0; count < 12 * 4; count += 4)
-               edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
+               edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
 
        /* update counter */
        sep->send_ct++;
@@ -540,7 +534,7 @@ static void sep_send_reply_command_handler(struct sep_device *sep)
        /* flash cache */
        flush_cache_all();
        for (count = 0; count < 12 * 4; count += 4)
-               edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
+               edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
        /* update counter */
        sep->send_ct++;
        /* send the interrupt to SEP */
@@ -578,7 +572,7 @@ static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
 
        /* set the virtual and bus address */
        command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
-       command_args.phys_address = sep->shared_area_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
+       command_args.phys_address = sep->shared_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
 
        /* write the memory back to the user space */
        error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
@@ -624,7 +618,7 @@ static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned lon
                goto end_function;
 
        /* calculate the start of the data pool */
-       data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
+       data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
 
 
        /* check that the range of the virtual kernel address is correct */
@@ -672,7 +666,7 @@ static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long
                goto end_function;
 
        /* calculate the start of the data pool */
-       data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
+       data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
 
        /* FIXME: These are incomplete all over the driver: what about + len
           and when doing that also overflows */
@@ -1065,7 +1059,7 @@ static void sep_debug_print_lli_tables(struct sep_device *sep, struct sep_lli_en
                edbg("SEP Driver:phys table_data_size is %lu num_table_entries is %lu lli_table_ptr is%lu\n", table_data_size, num_table_entries, (unsigned long) lli_table_ptr);
 
                if ((unsigned long) lli_table_ptr != 0xffffffff)
-                       lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_area_bus_to_virt(sep, (unsigned long) lli_table_ptr);
+                       lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_bus_to_virt(sep, (unsigned long) lli_table_ptr);
 
                table_count++;
        }
@@ -1115,16 +1109,16 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
        if (data_size == 0) {
                /* special case  - created 2 entries table with zero data */
-               in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
+               in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
                /* FIXME: Should the entry below not be for _bus */
-               in_lli_table_ptr->physical_address = (unsigned long)sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+               in_lli_table_ptr->physical_address = (unsigned long)sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
                in_lli_table_ptr->block_size = 0;
 
                in_lli_table_ptr++;
                in_lli_table_ptr->physical_address = 0xFFFFFFFF;
                in_lli_table_ptr->block_size = 0;
 
-               *lli_table_ptr = sep->shared_area_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+               *lli_table_ptr = sep->shared_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
                *num_entries_ptr = 2;
                *table_data_size_ptr = 0;
 
@@ -1149,7 +1143,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
        sep_lli_entries = sep->in_num_pages;
 
        /* initiate to point after the message area */
-       lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+       lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
 
        /* loop till all the entries in in array are not processed */
        while (current_entry < sep_lli_entries) {
@@ -1171,14 +1165,14 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
                if (info_entry_ptr == 0) {
                        /* set the output parameters to physical addresses */
-                       *lli_table_ptr = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
+                       *lli_table_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
                        *num_entries_ptr = num_entries_in_table;
                        *table_data_size_ptr = table_data_size;
 
                        edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_ptr);
                } else {
                        /* update the info entry of the previous in table */
-                       info_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
+                       info_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
                        info_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
                }
 
@@ -1188,7 +1182,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
        /* print input tables */
        sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
-                                  sep_shared_area_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
+                                  sep_shared_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
 
        /* the array of the pages */
        kfree(lli_array_ptr);
@@ -1240,7 +1234,7 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
        dbg("SEP Driver:--------> sep_construct_dma_tables_from_lli start\n");
 
        /* initiate to pint after the message area */
-       lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+       lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
 
        current_in_entry = 0;
        current_out_entry = 0;
@@ -1288,9 +1282,9 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
                /* if info entry is null - this is the first table built */
                if (info_in_entry_ptr == 0) {
                        /* set the output parameters to physical addresses */
-                       *lli_table_in_ptr = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
+                       *lli_table_in_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
                        *in_num_entries_ptr = num_entries_in_table;
-                       *lli_table_out_ptr = sep_shared_area_virt_to_bus(sep, out_lli_table_ptr);
+                       *lli_table_out_ptr = sep_shared_virt_to_bus(sep, out_lli_table_ptr);
                        *out_num_entries_ptr = num_entries_out_table;
                        *table_data_size_ptr = table_data_size;
 
@@ -1298,11 +1292,11 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
                        edbg("SEP Driver:output lli_table_out_ptr is %08lx\n", *lli_table_out_ptr);
                } else {
                        /* update the info entry of the previous in table */
-                       info_in_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
+                       info_in_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
                        info_in_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
 
                        /* update the info entry of the previous in table */
-                       info_out_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, out_lli_table_ptr);
+                       info_out_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, out_lli_table_ptr);
                        info_out_entry_ptr->block_size = ((num_entries_out_table) << 24) | (table_data_size);
                }
 
@@ -1317,10 +1311,10 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
 
        /* print input tables */
        sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
-                                  sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
+                                  sep_shared_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
        /* print output tables */
        sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
-                                  sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
+                                  sep_shared_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
        dbg("SEP Driver:<-------- sep_construct_dma_tables_from_lli end\n");
        return 0;
 }
@@ -1494,7 +1488,7 @@ static int sep_find_free_flow_dma_table_space(struct sep_device *sep,
        unsigned long table_size_in_words;
 
        /* find the start address of the flow DMA table area */
-       flow_dma_area_start_addr = sep->shared_area + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
+       flow_dma_area_start_addr = sep->shared_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
 
        /* set end address of the flow table area */
        flow_dma_area_end_addr = flow_dma_area_start_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES;
@@ -1958,8 +1952,8 @@ static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned lon
        dbg("SEP Driver:--------> sep_get_static_pool_addr_handler start\n");
 
        /*prepare the output parameters in the struct */
-       command_args.physical_static_address = sep->shared_area_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
-       command_args.virtual_static_address = (unsigned long)sep->shared_area + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
+       command_args.physical_static_address = sep->shared_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
+       command_args.virtual_static_address = (unsigned long)sep->shared_addr + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
 
        edbg("SEP Driver:bus_static_address is %08lx, virtual_static_address %08lx\n", command_args.physical_static_address, command_args.virtual_static_address);
 
@@ -1984,13 +1978,13 @@ static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsign
        if (error)
                goto end_function;
 
-       if (command_args.physical_address < sep->shared_area_bus) {
+       if (command_args.physical_address < sep->shared_bus) {
                error = -EINVAL;
                goto end_function;
        }
 
        /*prepare the output parameters in the struct */
-       command_args.offset = command_args.physical_address - sep->shared_area_bus;
+       command_args.offset = command_args.physical_address - sep->shared_bus;
 
        edbg("SEP Driver:bus_address is %08lx, offset is %lu\n", command_args.physical_address, command_args.offset);
 
@@ -2106,26 +2100,26 @@ static int sep_realloc_cache_resident_handler(struct sep_device *sep,
        if (error)
                return error;
 
-       command_args.new_base_addr = sep->shared_area_bus;
+       command_args.new_base_addr = sep->shared_bus;
 
        /* find the new base address according to the lowest address between
           cache, resident and shared area */
        if (sep->resident_bus < command_args.new_base_addr)
                command_args.new_base_addr = sep->resident_bus;
-       if (sep->cache_bus < command_args.new_base_addr)
-               command_args.new_base_addr = sep->cache_bus;
+       if (sep->rar_bus < command_args.new_base_addr)
+               command_args.new_base_addr = sep->rar_bus;
 
        /* set the return parameters */
-       command_args.new_cache_addr = sep->cache_bus;
+       command_args.new_cache_addr = sep->rar_bus;
        command_args.new_resident_addr = sep->resident_bus;
 
        /* set the new shared area */
-       command_args.new_shared_area_addr = sep->shared_area_bus;
+       command_args.new_shared_area_addr = sep->shared_bus;
 
-       edbg("SEP Driver:command_args.new_shared_area is %08llx\n", command_args.new_shared_area_addr);
+       edbg("SEP Driver:command_args.new_shared_addr is %08llx\n", command_args.new_shared_area_addr);
        edbg("SEP Driver:command_args.new_base_addr is %08llx\n", command_args.new_base_addr);
        edbg("SEP Driver:command_args.new_resident_addr is %08llx\n", command_args.new_resident_addr);
-       edbg("SEP Driver:command_args.new_cache_addr is %08llx\n", command_args.new_cache_addr);
+       edbg("SEP Driver:command_args.new_rar_addr is %08llx\n", command_args.new_cache_addr);
 
        /* return to user */
        if (copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_realloc_cache_resident_t)))
@@ -2320,7 +2314,7 @@ static void sep_flow_done_handler(struct work_struct *work)
           flag may be checked */
        if (flow_data_ptr->input_tables_flag) {
                /* copy the message to the shared RAM and signal SEP */
-               memcpy((void *) flow_data_ptr->message, (void *) sep->shared_area, flow_data_ptr->message_size_in_bytes);
+               memcpy((void *) flow_data_ptr->message, (void *) sep->shared_addr, flow_data_ptr->message_size_in_bytes);
 
                sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2);
        }
@@ -2431,6 +2425,8 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
        struct sep_device *sep;
        int counter;
        int size;               /* size of memory for allocation */
+       unsigned long iosize;
+       unsigned long bar0, end0;
 
        edbg("Sep pci probe starting\n");
        if (sep_dev != NULL) {
@@ -2449,7 +2445,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
        sep_dev = &sep_instance;
        sep = &sep_instance;
 
-       edbg("sep->shared_area = %lx\n", (unsigned long) &sep->shared_area);
+       edbg("sep->shared_addr = %p\n", sep->shared_addr);
        /* transaction counter that coordinates the transactions between SEP
        and HOST */
        sep->send_ct = 0;
@@ -2470,21 +2466,17 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
                goto end_function_error;
        }
        /* now set the memory regions */
-       sep->message_shared_area_addr = sep->shared_area;
-
-       edbg("SEP Driver: sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
-
 #if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1)
        /* send the new SHARED MESSAGE AREA to the SEP */
-       sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_area_bus);
+       sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus);
 
        /* poll for SEP response */
        retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
-       while (retval != 0xffffffff && retval != sep->shared_area_bus)
+       while (retval != 0xffffffff && retval != sep->shared_bus)
                retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
 
        /* check the return value (register) */
-       if (retval != sep->shared_area_bus) {
+       if (retval != sep->shared_bus) {
                error = -ENOMEM;
                goto end_function_deallocate_sep_shared_area;
        }
@@ -2506,36 +2498,34 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
        sep->pdev = pci_dev_get(pdev);
 
        /* get the io memory start address */
-       sep->io_bus = pci_resource_start(pdev, 0);
-       if (!sep->io_bus) {
+       bar0 = pci_resource_start(pdev, 0);
+       if (!bar0) {
                edbg("SEP Driver error pci resource start\n");
                goto end_function_deallocate_sep_shared_area;
        }
 
        /* get the io memory end address */
-       sep->io_end_bus = pci_resource_end(pdev, 0);
-       if (!sep->io_end_bus) {
+       end0 = pci_resource_end(pdev, 0);
+       if (!end0) {
                edbg("SEP Driver error pci resource end\n");
                goto end_function_deallocate_sep_shared_area;
        }
 
-       sep->io_memory_size = sep->io_end_bus - sep->io_bus + 1;
+       iosize = end0 - bar0 + 1;
 
-       edbg("SEP Driver:io_bus is %08lx\n", sep->io_bus);
+       edbg("SEP Driver:io_bus is %08lx\n", bar0);
 
-       edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep->io_end_bus);
+       edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", end0);
 
-       edbg("SEP Driver:io_memory_size is %08lx\n", sep->io_memory_size);
+       edbg("SEP Driver:io_memory_size is %08lx\n", iosize);
 
-       sep->io_addr = ioremap_nocache(sep->io_bus, sep->io_memory_size);
-       if (!sep->io_addr) {
+       sep->reg_addr = ioremap_nocache(bar0, iosize);
+       if (!sep->reg_addr) {
                edbg("SEP Driver error ioremap of io memory\n");
                goto end_function_deallocate_sep_shared_area;
        }
 
-       edbg("SEP Driver:io_addr is %p\n", sep->io_addr);
-
-       sep->reg_addr = (void __iomem *) sep->io_addr;
+       edbg("SEP Driver:io_addr is %p\n", sep->reg_addr);
 
        /* set up system base address and shared memory location */
 
@@ -2578,7 +2568,7 @@ end_function_free_res:
                        sep->rar_addr, sep->rar_bus);
 #endif                         /* SEP_DRIVER_POLLING_MODE */
 end_function_uniomap:
-       iounmap(sep->io_addr);
+       iounmap(sep->reg_addr);
 end_function_deallocate_sep_shared_area:
        /* de-allocate shared area */
        sep_unmap_and_free_shared_area(sep, size);