PKG_NAME:=mac80211
-PKG_VERSION:=2015-10-26
+PKG_VERSION:=2015-12-03
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
-PKG_MD5SUM:=3b07569065a18c6a69a340ea50235b7d
+PKG_MD5SUM:=7a1dc4dc2f509e5532b935b0a0d15103
PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
$(call KernelPackage/mac80211/Default)
TITLE:=ADMTek 8211 support
DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/adm8211.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/admtek/adm8211.ko
AUTOLOAD:=$(call AutoProbe,adm8211)
endef
@PCI_SUPPORT +kmod-mac80211 \
$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
AUTOLOAD:=$(call AutoProbe,b43)
MENU:=1
endef
KCONFIG:= \
CONFIG_HW_RANDOM=y
DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
AUTOLOAD:=$(call AutoProbe,b43legacy)
MENU:=1
endef
TITLE:=Broadcom IEEE802.11n common driver parts
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
AUTOLOAD:=$(call AutoProbe,brcmutil)
MENU:=1
endef
TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
AUTOLOAD:=$(call AutoProbe,brcmsmac)
MENU:=1
endef
TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
AUTOLOAD:=$(call AutoProbe,brcmfmac)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes 802.11b chipset support
DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco.ko
AUTOLOAD:=$(call AutoProbe,orinoco)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Intersil Prism 2.5 PCI support
DEPENDS:=@PCI_SUPPORT +kmod-hermes
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_pci.ko
AUTOLOAD:=$(call AutoProbe,orinoco_pci)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=PLX9052 based PCI adaptor
DEPENDS:=@PCI_SUPPORT +kmod-hermes
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_plx.ko
AUTOLOAD:=$(call AutoProbe,orinoco_plx)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes based PCMCIA adaptors
DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko
AUTOLOAD:=$(call AutoProbe,orinoco_cs)
endef
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT
TITLE:=Intel AGN Wireless support
FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko
+ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko
AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm)
MENU:=1
endef
% echo 0x43fff > /sys/module/iwlwifi/parameters/debug
You can find the list of debug mask values in:
- drivers/net/wireless/iwlwifi/iwl-debug.h
+ drivers/net/wireless/intel/iwlwifi/iwl-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT
TITLE:=Intel legacy Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwlegacy.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko
AUTOLOAD:=$(call AutoProbe,iwlegacy)
endef
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy
TITLE:=Intel iwl3945 Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko
AUTOLOAD:=$(call AutoProbe,iwl3945)
endef
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT
TITLE:=Intel iwl4965 Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko
AUTOLOAD:=$(call AutoProbe,iwl4965)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=libipw for ipw2100 and ipw2200
DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko
AUTOLOAD:=$(call AutoProbe,libipw)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Intel IPW2100 driver
DEPENDS:=@PCI_SUPPORT +kmod-libipw
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko
AUTOLOAD:=$(call AutoProbe,ipw2100)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Intel IPW2200 driver
DEPENDS:=@PCI_SUPPORT +kmod-libipw
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko
AUTOLOAD:=$(call AutoProbe,ipw2200)
endef
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT
TITLE:=Marvell 88W8015 Wireless Driver
FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko
AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
endef
DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml
TITLE:=Marvell 88W8686 Wireless Driver
FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko
AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
endef
TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko
AUTOLOAD:=$(call AutoProbe,mwl8k)
endef
URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko
AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
endef
$(call KernelPackage/p54/Default)
DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
TITLE+= (COMMON)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54common.ko
endef
define KernelPackage/p54-pci
$(call KernelPackage/p54/Default)
TITLE+= (PCI)
DEPENDS+= @PCI_SUPPORT +kmod-p54-common
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54pci.ko
AUTOLOAD:=$(call AutoProbe,p54pci)
endef
$(call KernelPackage/p54/Default)
TITLE+= (USB)
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54usb.ko
AUTOLOAD:=$(call AutoProbe,p54usb)
endef
$(call KernelPackage/p54/Default)
TITLE+= (SPI)
DEPENDS+= @TARGET_omap24xx +kmod-p54-common
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54spi.ko
AUTOLOAD:=$(call AutoProbe,p54spi)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
TITLE+= (LIB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
MENU:=1
endef
DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
HIDDEN:=1
TITLE+= (MMIO)
- FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00mmio.ko
+ FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko
endef
define KernelPackage/rt2x00-pci
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
HIDDEN:=1
TITLE+= (PCI)
- FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko
+ FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko
AUTOLOAD:=$(call AutoProbe,rt2x00pci)
endef
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
HIDDEN:=1
TITLE+= (USB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko
AUTOLOAD:=$(call AutoProbe,rt2x00usb)
endef
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
HIDDEN:=1
TITLE+= (rt2800 LIB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
endef
define KernelPackage/rt2400-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
TITLE+= (RT2400 PCI)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko
AUTOLOAD:=$(call AutoProbe,rt2400pci)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
TITLE+= (RT2500 PCI)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko
AUTOLOAD:=$(call AutoProbe,rt2500pci)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
TITLE+= (RT2500 USB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko
AUTOLOAD:=$(call AutoProbe,rt2500usb)
endef
TITLE += (RT28xx/RT3xxx MMIO)
DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
HIDDEN:=1
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800mmio.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko
endef
define KernelPackage/rt2800-soc
DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
TITLE += (RT28xx/RT3xxx SoC)
FILES := \
- $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800soc.ko
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko
AUTOLOAD:=$(call AutoProbe,rt2800soc)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio
TITLE+= (RT2860 PCI)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko
AUTOLOAD:=$(call AutoProbe,rt2800pci)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt
TITLE+= (RT2870 USB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko
AUTOLOAD:=$(call AutoProbe,rt2800usb)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
TITLE+= (RT2x61 PCI)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko
AUTOLOAD:=$(call AutoProbe,rt61pci)
endef
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
TITLE+= (RT73 USB)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko
AUTOLOAD:=$(call AutoProbe,rt73usb)
endef
$(call KernelPackage/mac80211/Default)
TITLE:=Zydas ZD1211 support
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zydas/zd1211rw/zd1211rw.ko
AUTOLOAD:=$(call AutoProbe,zd1211rw)
endef
MAC80211_RC_MINSTREL_HT \
MAC80211_RC_MINSTREL_VHT \
MAC80211_RC_DEFAULT_MINSTREL \
+ WLAN_VENDOR_ADMTEK \
+ WLAN_VENDOR_ATH \
+ WLAN_VENDOR_ATMEL \
+ WLAN_VENDOR_BROADCOM \
+ WLAN_VENDOR_INTEL \
+ WLAN_VENDOR_INTERSIL \
+ WLAN_VENDOR_MARVELL \
+ WLAN_VENDOR_MEDIATEK \
+ WLAN_VENDOR_RALINK \
+ WLAN_VENDOR_REALTEK \
+ WLAN_VENDOR_RSI \
+ WLAN_VENDOR_ST \
+ WLAN_VENDOR_TI \
+ WLAN_VENDOR_ZYDAS \
config-$(call config_package,cfg80211) += CFG80211
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -225,36 +225,37 @@ config RT2800SOC
---- a/drivers/net/wireless/brcm80211/Kconfig
-+++ b/drivers/net/wireless/brcm80211/Kconfig
+--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
++++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -1,5 +1,5 @@
config BRCMUTIL
- tristate
--- a/.local-symbols
+++ b/.local-symbols
-@@ -454,43 +454,6 @@ USB_IPHETH=
+@@ -475,44 +475,6 @@ USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
USB_NET_CH9200=
-SSB_PCMCIAHOST=
-SSB_SDIOHOST_POSSIBLE=
-SSB_SDIOHOST=
+-SSB_HOST_SOC=
-SSB_SILENT=
-SSB_DEBUG=
-SSB_SERIAL=
NFC=
NFC_DIGITAL=
NFC_NCI=
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -2867,7 +2867,7 @@ static struct ssb_device *b43_ssb_gpio_d
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
+@@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d
{
struct ssb_bus *bus = dev->dev->sdev->bus;
return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
#else
return bus->chipco.dev;
-@@ -4904,7 +4904,7 @@ static int b43_wireless_core_init(struct
+@@ -4903,7 +4903,7 @@ static int b43_wireless_core_init(struct
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
---- a/drivers/net/wireless/b43legacy/main.c
-+++ b/drivers/net/wireless/b43legacy/main.c
+--- a/drivers/net/wireless/broadcom/b43legacy/main.c
++++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
---- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
@@ -43,6 +43,6 @@ brcmsmac-y := \
brcms_trace_events.o \
debug.o
+brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
obj-$(CPTCFG_BRCMSMAC) += brcmsmac.o
---- a/drivers/net/wireless/brcm80211/brcmsmac/led.h
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
@@ -22,7 +22,7 @@ struct brcms_led {
bool active_low;
};
--- a/Makefile.kernel
+++ b/Makefile.kernel
@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
- #obj-$(CPTCFG_WLAN += drivers/net/wireless/
+ obj-$(CPTCFG_WLAN) += drivers/net/wireless/
obj-$(CPTCFG_BT) += net/bluetooth/
obj-$(CPTCFG_BT) += drivers/bluetooth/
-obj-$(CPTCFG_SSB) += drivers/ssb/
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
-@@ -6,6 +6,7 @@ menuconfig ATH_CARDS
- tristate "Atheros Wireless Cards"
+@@ -1,5 +1,5 @@
+ config ATH_COMMON
+- tristate
++ tristate "ath.ko"
depends on m
- depends on CFG80211 && (!UML || BROKEN)
-+ select ATH_COMMON
- ---help---
- This will enable the support for the Atheros wireless drivers.
- ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
+
+ config WLAN_VENDOR_ATH
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -1981,7 +1981,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -1971,7 +1971,7 @@ static int ieee80211_scan(struct wiphy *
* the frames sent while scanning on other channel will be
* lost)
*/
--- /dev/null
+From: Bob Copeland <me@bobcopeland.com>
+Date: Thu, 19 Nov 2015 10:04:48 -0500
+Subject: [PATCH] ath5k: fix RTS/CTS by using proper rate flags
+
+The rates in the tx control rateset do not have the protection
+flags applied, so RTS/CTS would never get enabled if requested.
+
+Fix by using the rate flags in the rates returned by
+ieee80211_get_tx_rates().
+
+Signed-off-by: Bob Copeland <me@bobcopeland.com>
+---
+
+--- a/drivers/net/wireless/ath/ath5k/base.c
++++ b/drivers/net/wireless/ath/ath5k/base.c
+@@ -767,7 +767,7 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, s
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ flags |= AR5K_TXDESC_NOACK;
+
+- rc_flags = info->control.rates[0].flags;
++ rc_flags = bf->rates[0].flags;
+
+ hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0);
+
+++ /dev/null
-From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Date: Tue, 20 Oct 2015 14:19:26 +0200
-Subject: [PATCH] ath9k: fix phyerror codes
-
-Some of the ath9k_phyerr enums were wrong from the
-beginning (and even before). Most of the time the
-codes were used for counters to be displayed over
-debugfs, which made this a non-functional issue.
-
-Some (e.g. ATH9K_PHYERR_FALSE_RADAR_EXT) are used
-for radar detection and require the correct code
-to work as intended.
-
-This patch includes:
-a) fixes
- ATH9K_PHYERR_FALSE_RADAR_EXT: 24 => 36
- ATH9K_PHYERR_CCK_LENGTH_ILLEGAL: 32 => 28
- ATH9K_PHYERR_CCK_POWER_DROP: 33 => 29
- ATH9K_PHYERR_HT_CRC_ERROR: 34 => 32
- ATH9K_PHYERR_HT_LENGTH_ILLEGAL: 35 => 33
- ATH9K_PHYERR_HT_RATE_ILLEGAL: 36 => 34
-
-b) extensions
- ATH9K_PHYERR_CCK_BLOCKER = 24
- ATH9K_PHYERR_HT_ZLF = 35
- ATH9K_PHYERR_GREEN_FIELD = 37
-
-Aside from the correction and completion made in
-the enum, the patch also extends the display of
-the related counters in the debugfs.
-
-Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/common-debug.c
-+++ b/drivers/net/wireless/ath/ath9k/common-debug.c
-@@ -207,6 +207,7 @@ static ssize_t read_file_phy_err(struct
- PHY_ERR("RADAR ERR", ATH9K_PHYERR_RADAR);
- PHY_ERR("SERVICE ERR", ATH9K_PHYERR_SERVICE);
- PHY_ERR("TOR ERR", ATH9K_PHYERR_TOR);
-+
- PHY_ERR("OFDM-TIMING ERR", ATH9K_PHYERR_OFDM_TIMING);
- PHY_ERR("OFDM-SIGNAL-PARITY ERR", ATH9K_PHYERR_OFDM_SIGNAL_PARITY);
- PHY_ERR("OFDM-RATE ERR", ATH9K_PHYERR_OFDM_RATE_ILLEGAL);
-@@ -214,17 +215,24 @@ static ssize_t read_file_phy_err(struct
- PHY_ERR("OFDM-POWER-DROP ERR", ATH9K_PHYERR_OFDM_POWER_DROP);
- PHY_ERR("OFDM-SERVICE ERR", ATH9K_PHYERR_OFDM_SERVICE);
- PHY_ERR("OFDM-RESTART ERR", ATH9K_PHYERR_OFDM_RESTART);
-- PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
-+
-+ PHY_ERR("CCK-BLOCKER ERR", ATH9K_PHYERR_CCK_BLOCKER);
- PHY_ERR("CCK-TIMING ERR", ATH9K_PHYERR_CCK_TIMING);
- PHY_ERR("CCK-HEADER-CRC ERR", ATH9K_PHYERR_CCK_HEADER_CRC);
- PHY_ERR("CCK-RATE ERR", ATH9K_PHYERR_CCK_RATE_ILLEGAL);
-- PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
-- PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
- PHY_ERR("CCK-LENGTH ERR", ATH9K_PHYERR_CCK_LENGTH_ILLEGAL);
- PHY_ERR("CCK-POWER-DROP ERR", ATH9K_PHYERR_CCK_POWER_DROP);
-+ PHY_ERR("CCK-SERVICE ERR", ATH9K_PHYERR_CCK_SERVICE);
-+ PHY_ERR("CCK-RESTART ERR", ATH9K_PHYERR_CCK_RESTART);
-+
- PHY_ERR("HT-CRC ERR", ATH9K_PHYERR_HT_CRC_ERROR);
- PHY_ERR("HT-LENGTH ERR", ATH9K_PHYERR_HT_LENGTH_ILLEGAL);
- PHY_ERR("HT-RATE ERR", ATH9K_PHYERR_HT_RATE_ILLEGAL);
-+ PHY_ERR("HT-ZLF ERR", ATH9K_PHYERR_HT_ZLF);
-+
-+ PHY_ERR("FALSE-RADAR-EXT ERR", ATH9K_PHYERR_FALSE_RADAR_EXT);
-+ PHY_ERR("GREEN-FIELD ERR", ATH9K_PHYERR_GREEN_FIELD);
-+ PHY_ERR("SPECTRAL ERR", ATH9K_PHYERR_SPECTRAL);
-
- if (len > size)
- len = size;
---- a/drivers/net/wireless/ath/ath9k/mac.h
-+++ b/drivers/net/wireless/ath/ath9k/mac.h
-@@ -209,21 +209,25 @@ enum ath9k_phyerr {
- ATH9K_PHYERR_OFDM_POWER_DROP = 21,
- ATH9K_PHYERR_OFDM_SERVICE = 22,
- ATH9K_PHYERR_OFDM_RESTART = 23,
-- ATH9K_PHYERR_FALSE_RADAR_EXT = 24,
-
-+ ATH9K_PHYERR_CCK_BLOCKER = 24,
- ATH9K_PHYERR_CCK_TIMING = 25,
- ATH9K_PHYERR_CCK_HEADER_CRC = 26,
- ATH9K_PHYERR_CCK_RATE_ILLEGAL = 27,
-+ ATH9K_PHYERR_CCK_LENGTH_ILLEGAL = 28,
-+ ATH9K_PHYERR_CCK_POWER_DROP = 29,
- ATH9K_PHYERR_CCK_SERVICE = 30,
- ATH9K_PHYERR_CCK_RESTART = 31,
-- ATH9K_PHYERR_CCK_LENGTH_ILLEGAL = 32,
-- ATH9K_PHYERR_CCK_POWER_DROP = 33,
-
-- ATH9K_PHYERR_HT_CRC_ERROR = 34,
-- ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 35,
-- ATH9K_PHYERR_HT_RATE_ILLEGAL = 36,
-+ ATH9K_PHYERR_HT_CRC_ERROR = 32,
-+ ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 33,
-+ ATH9K_PHYERR_HT_RATE_ILLEGAL = 34,
-+ ATH9K_PHYERR_HT_ZLF = 35,
-+
-+ ATH9K_PHYERR_FALSE_RADAR_EXT = 36,
-+ ATH9K_PHYERR_GREEN_FIELD = 37,
-+ ATH9K_PHYERR_SPECTRAL = 38,
-
-- ATH9K_PHYERR_SPECTRAL = 38,
- ATH9K_PHYERR_MAX = 39,
- };
-
--- /dev/null
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Sun, 22 Nov 2015 14:03:40 +0100
+Subject: [PATCH] ath10k: do not use coherent memory for allocated device
+ memory chunks
+
+Coherent memory is more expensive to allocate (and constrained on some
+architectures where it has to be pre-allocated). It is also completely
+unnecessary, since the host has no reason to even access these allocated
+memory spaces
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -4312,34 +4312,58 @@ void ath10k_wmi_event_vdev_resume_req(st
+ ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_RESUME_REQ_EVENTID\n");
+ }
+
+-static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
+- u32 num_units, u32 unit_len)
++static int ath10k_wmi_alloc_chunk(struct ath10k *ar, u32 req_id,
++ u32 num_units, u32 unit_len)
+ {
+ dma_addr_t paddr;
+- u32 pool_size;
++ u32 pool_size = 0;
+ int idx = ar->wmi.num_mem_chunks;
++ void *vaddr = NULL;
+
+- pool_size = num_units * round_up(unit_len, 4);
++ if (ar->wmi.num_mem_chunks == ARRAY_SIZE(ar->wmi.mem_chunks))
++ return -ENOMEM;
+
+- if (!pool_size)
+- return -EINVAL;
++ while (!vaddr && num_units) {
++ pool_size = num_units * round_up(unit_len, 4);
++ if (!pool_size)
++ return -EINVAL;
+
+- ar->wmi.mem_chunks[idx].vaddr = dma_alloc_coherent(ar->dev,
+- pool_size,
+- &paddr,
+- GFP_KERNEL);
+- if (!ar->wmi.mem_chunks[idx].vaddr) {
+- ath10k_warn(ar, "failed to allocate memory chunk\n");
+- return -ENOMEM;
++ vaddr = kzalloc(pool_size, GFP_KERNEL | __GFP_NOWARN);
++ if (!vaddr)
++ num_units /= 2;
+ }
+
+- memset(ar->wmi.mem_chunks[idx].vaddr, 0, pool_size);
++ if (!num_units)
++ return -ENOMEM;
++
++ paddr = dma_map_single(ar->dev, vaddr, pool_size, DMA_TO_DEVICE);
++ if (dma_mapping_error(ar->dev, paddr)) {
++ kfree(vaddr);
++ return -ENOMEM;
++ }
+
++ ar->wmi.mem_chunks[idx].vaddr = vaddr;
+ ar->wmi.mem_chunks[idx].paddr = paddr;
+ ar->wmi.mem_chunks[idx].len = pool_size;
+ ar->wmi.mem_chunks[idx].req_id = req_id;
+ ar->wmi.num_mem_chunks++;
+
++ return num_units;
++}
++
++static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
++ u32 num_units, u32 unit_len)
++{
++ int ret;
++
++ while (num_units) {
++ ret = ath10k_wmi_alloc_chunk(ar, req_id, num_units, unit_len);
++ if (ret < 0)
++ return ret;
++
++ num_units -= ret;
++ }
++
+ return 0;
+ }
+
+@@ -7717,10 +7741,11 @@ void ath10k_wmi_free_host_mem(struct ath
+
+ /* free the host memory chunks requested by firmware */
+ for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
+- dma_free_coherent(ar->dev,
+- ar->wmi.mem_chunks[i].len,
+- ar->wmi.mem_chunks[i].vaddr,
+- ar->wmi.mem_chunks[i].paddr);
++ dma_unmap_single(ar->dev,
++ ar->wmi.mem_chunks[i].paddr,
++ ar->wmi.mem_chunks[i].len,
++ DMA_TO_DEVICE);
++ kfree(ar->wmi.mem_chunks[i].vaddr);
+ }
+
+ ar->wmi.num_mem_chunks = 0;
+++ /dev/null
-From: Maharaja <c_mkenna@qti.qualcomm.com>
-Date: Wed, 21 Oct 2015 11:49:18 +0300
-Subject: [PATCH] ath10k: enable adaptive CCA
-
-European Union has made it mandatory that all devices working in 2.4 GHz
-has to adhere to the ETSI specification (ETSI EN 300 328 V1.9.1)
-beginnig this year. The standard basically speaks about interferences
-in 2.4Ghz band.
-For example, when 802.11 device detects interference, TX must be stopped
-as long as interference is present.
-
-Adaptive CCA is a feature, when enabled the device learns from the
-environment and configures CCA levels adaptively. This will improve
-detecting interferences and the device can stop trasmissions till the
-interference is present eventually leading to good performances in
-varying interference conditions.
-
-The patch includes code for enabling adaptive CCA for 10.2.4 firmware on
-QCA988X.
-
-Signed-off-by: Maharaja <c_mkenna@qti.qualcomm.com>
-Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -151,6 +151,7 @@ static const char *const ath10k_core_fw_
- [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad",
- [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init",
- [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode",
-+ [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca",
- };
-
- static unsigned int ath10k_core_get_fw_feature_str(char *buf,
---- a/drivers/net/wireless/ath/ath10k/core.h
-+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -497,6 +497,9 @@ enum ath10k_fw_features {
- */
- ATH10K_FW_FEATURE_RAW_MODE_SUPPORT = 10,
-
-+ /* Firmware Supports Adaptive CCA*/
-+ ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA = 11,
-+
- /* keep last */
- ATH10K_FW_FEATURE_COUNT,
- };
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -3905,6 +3905,18 @@ static int ath10k_start(struct ieee80211
- goto err_core_stop;
- }
-
-+ if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA,
-+ ar->fw_features)) {
-+ ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1,
-+ WMI_CCA_DETECT_LEVEL_AUTO,
-+ WMI_CCA_DETECT_MARGIN_AUTO);
-+ if (ret) {
-+ ath10k_warn(ar, "failed to enable adaptive cca: %d\n",
-+ ret);
-+ goto err_core_stop;
-+ }
-+ }
-+
- ret = ath10k_wmi_pdev_set_param(ar,
- ar->wmi.pdev_param->ani_enable, 1);
- if (ret) {
---- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
-+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
-@@ -182,6 +182,10 @@ struct wmi_ops {
- void (*fw_stats_fill)(struct ath10k *ar,
- struct ath10k_fw_stats *fw_stats,
- char *buf);
-+ struct sk_buff *(*gen_pdev_enable_adaptive_cca)(struct ath10k *ar,
-+ u8 enable,
-+ u32 detect_level,
-+ u32 detect_margin);
- };
-
- int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
-@@ -1302,4 +1306,25 @@ ath10k_wmi_fw_stats_fill(struct ath10k *
- ar->wmi.ops->fw_stats_fill(ar, fw_stats, buf);
- return 0;
- }
-+
-+static inline int
-+ath10k_wmi_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
-+ u32 detect_level, u32 detect_margin)
-+{
-+ struct sk_buff *skb;
-+
-+ if (!ar->wmi.ops->gen_pdev_enable_adaptive_cca)
-+ return -EOPNOTSUPP;
-+
-+ skb = ar->wmi.ops->gen_pdev_enable_adaptive_cca(ar, enable,
-+ detect_level,
-+ detect_margin);
-+
-+ if (IS_ERR(skb))
-+ return PTR_ERR(skb);
-+
-+ return ath10k_wmi_cmd_send(ar, skb,
-+ ar->wmi.cmd->pdev_enable_adaptive_cca_cmdid);
-+}
-+
- #endif
---- a/drivers/net/wireless/ath/ath10k/wmi.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -148,6 +148,7 @@ static struct wmi_cmd_map wmi_cmd_map =
- .gpio_config_cmdid = WMI_GPIO_CONFIG_CMDID,
- .gpio_output_cmdid = WMI_GPIO_OUTPUT_CMDID,
- .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
-+ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
- .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
-@@ -313,6 +314,7 @@ static struct wmi_cmd_map wmi_10x_cmd_ma
- .gpio_config_cmdid = WMI_10X_GPIO_CONFIG_CMDID,
- .gpio_output_cmdid = WMI_10X_GPIO_OUTPUT_CMDID,
- .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
-+ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
- .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
-@@ -477,6 +479,7 @@ static struct wmi_cmd_map wmi_10_2_4_cmd
- .gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
- .gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
- .pdev_get_temperature_cmdid = WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
-+ .pdev_enable_adaptive_cca_cmdid = WMI_10_2_SET_CCA_PARAMS,
- .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
-@@ -1407,6 +1410,7 @@ static struct wmi_cmd_map wmi_10_2_cmd_m
- .gpio_config_cmdid = WMI_10_2_GPIO_CONFIG_CMDID,
- .gpio_output_cmdid = WMI_10_2_GPIO_OUTPUT_CMDID,
- .pdev_get_temperature_cmdid = WMI_CMD_UNSUPPORTED,
-+ .pdev_enable_adaptive_cca_cmdid = WMI_CMD_UNSUPPORTED,
- .scan_update_request_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_standby_response_cmdid = WMI_CMD_UNSUPPORTED,
- .vdev_resume_response_cmdid = WMI_CMD_UNSUPPORTED,
-@@ -6996,6 +7000,28 @@ unlock:
- buf[len] = 0;
- }
-
-+static struct sk_buff *
-+ath10k_wmi_op_gen_pdev_enable_adaptive_cca(struct ath10k *ar, u8 enable,
-+ u32 detect_level, u32 detect_margin)
-+{
-+ struct wmi_pdev_set_adaptive_cca_params *cmd;
-+ struct sk_buff *skb;
-+
-+ skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
-+ if (!skb)
-+ return ERR_PTR(-ENOMEM);
-+
-+ cmd = (struct wmi_pdev_set_adaptive_cca_params *)skb->data;
-+ cmd->enable = __cpu_to_le32(enable);
-+ cmd->cca_detect_level = __cpu_to_le32(detect_level);
-+ cmd->cca_detect_margin = __cpu_to_le32(detect_margin);
-+
-+ ath10k_dbg(ar, ATH10K_DBG_WMI,
-+ "wmi pdev set adaptive cca params enable:%d detection level:%d detection margin:%d\n",
-+ enable, detect_level, detect_margin);
-+ return skb;
-+}
-+
- static const struct wmi_ops wmi_ops = {
- .rx = ath10k_wmi_op_rx,
- .map_svc = wmi_main_svc_map,
-@@ -7059,6 +7085,7 @@ static const struct wmi_ops wmi_ops = {
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
- /* .gen_adaptive_qcs not implemented */
-+ /* .gen_pdev_enable_adaptive_cca not implemented */
- };
-
- static const struct wmi_ops wmi_10_1_ops = {
-@@ -7125,6 +7152,7 @@ static const struct wmi_ops wmi_10_1_ops
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
- /* .gen_adaptive_qcs not implemented */
-+ /* .gen_pdev_enable_adaptive_cca not implemented */
- };
-
- static const struct wmi_ops wmi_10_2_ops = {
-@@ -7188,6 +7216,7 @@ static const struct wmi_ops wmi_10_2_ops
- .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
- .gen_delba_send = ath10k_wmi_op_gen_delba_send,
- .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
-+ /* .gen_pdev_enable_adaptive_cca not implemented */
- };
-
- static const struct wmi_ops wmi_10_2_4_ops = {
-@@ -7251,6 +7280,8 @@ static const struct wmi_ops wmi_10_2_4_o
- .gen_delba_send = ath10k_wmi_op_gen_delba_send,
- .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
- .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
-+ .gen_pdev_enable_adaptive_cca =
-+ ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
- /* .gen_bcn_tmpl not implemented */
- /* .gen_prb_tmpl not implemented */
- /* .gen_p2p_go_bcn_ie not implemented */
---- a/drivers/net/wireless/ath/ath10k/wmi.h
-+++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -772,6 +772,7 @@ struct wmi_cmd_map {
- u32 mu_cal_start_cmdid;
- u32 set_cca_params_cmdid;
- u32 pdev_bss_chan_info_request_cmdid;
-+ u32 pdev_enable_adaptive_cca_cmdid;
- };
-
- /*
-@@ -1381,6 +1382,9 @@ enum wmi_10_2_cmd_id {
- WMI_10_2_VDEV_ATF_REQUEST_CMDID,
- WMI_10_2_PEER_ATF_REQUEST_CMDID,
- WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
-+ WMI_10_2_MU_CAL_START_CMDID,
-+ WMI_10_2_SET_LTEU_CONFIG_CMDID,
-+ WMI_10_2_SET_CCA_PARAMS,
- WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
- };
-
-@@ -6094,6 +6098,15 @@ enum wmi_txbf_conf {
- WMI_TXBF_CONF_AFTER_ASSOC,
- };
-
-+#define WMI_CCA_DETECT_LEVEL_AUTO 0
-+#define WMI_CCA_DETECT_MARGIN_AUTO 0
-+
-+struct wmi_pdev_set_adaptive_cca_params {
-+ __le32 enable;
-+ __le32 cca_detect_level;
-+ __le32 cca_detect_margin;
-+} __packed;
-+
- struct ath10k;
- struct ath10k_vif;
- struct ath10k_fw_stats_pdev;
+++ /dev/null
-From: Alan Liu <alanliu@qca.qualcomm.com>
-Date: Wed, 28 Oct 2015 21:38:32 +0200
-Subject: [PATCH] ath10k: add FW API support to test mode
-
-Add WMI-TLV and FW API support in ath10k testmode.
-Ath10k can get right wmi command format from UTF image
-to communicate UTF firmware.
-
-Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -569,8 +569,8 @@ static int ath10k_download_fw(struct ath
- }
- break;
- case ATH10K_FIRMWARE_MODE_UTF:
-- data = ar->testmode.utf->data;
-- data_len = ar->testmode.utf->size;
-+ data = ar->testmode.utf_firmware_data;
-+ data_len = ar->testmode.utf_firmware_len;
- mode_name = "utf";
- break;
- default:
---- a/drivers/net/wireless/ath/ath10k/core.h
-+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -817,9 +817,12 @@ struct ath10k {
- struct {
- /* protected by conf_mutex */
- const struct firmware *utf;
-+ char utf_version[32];
-+ const void *utf_firmware_data;
-+ size_t utf_firmware_len;
- DECLARE_BITMAP(orig_fw_features, ATH10K_FW_FEATURE_COUNT);
- enum ath10k_fw_wmi_op_version orig_wmi_op_version;
--
-+ enum ath10k_fw_wmi_op_version op_version;
- /* protected by data_lock */
- bool utf_monitor;
- } testmode;
---- a/drivers/net/wireless/ath/ath10k/hw.h
-+++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -94,6 +94,7 @@ enum qca6174_chip_id_rev {
- #define ATH10K_FW_API5_FILE "firmware-5.bin"
-
- #define ATH10K_FW_UTF_FILE "utf.bin"
-+#define ATH10K_FW_UTF_API2_FILE "utf-2.bin"
-
- /* includes also the null byte */
- #define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
---- a/drivers/net/wireless/ath/ath10k/testmode.c
-+++ b/drivers/net/wireless/ath/ath10k/testmode.c
-@@ -139,11 +139,181 @@ static int ath10k_tm_cmd_get_version(str
- return cfg80211_testmode_reply(skb);
- }
-
--static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
-+static int ath10k_tm_fetch_utf_firmware_api_2(struct ath10k *ar)
-+{
-+ size_t len, magic_len, ie_len;
-+ struct ath10k_fw_ie *hdr;
-+ char filename[100];
-+ __le32 *version;
-+ const u8 *data;
-+ int ie_id, ret;
-+
-+ snprintf(filename, sizeof(filename), "%s/%s",
-+ ar->hw_params.fw.dir, ATH10K_FW_UTF_API2_FILE);
-+
-+ /* load utf firmware image */
-+ ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
-+ if (ret) {
-+ ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
-+ filename, ret);
-+ return ret;
-+ }
-+
-+ data = ar->testmode.utf->data;
-+ len = ar->testmode.utf->size;
-+
-+ /* FIXME: call release_firmware() in error cases */
-+
-+ /* magic also includes the null byte, check that as well */
-+ magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1;
-+
-+ if (len < magic_len) {
-+ ath10k_err(ar, "utf firmware file is too small to contain magic\n");
-+ ret = -EINVAL;
-+ goto err;
-+ }
-+
-+ if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) {
-+ ath10k_err(ar, "invalid firmware magic\n");
-+ ret = -EINVAL;
-+ goto err;
-+ }
-+
-+ /* jump over the padding */
-+ magic_len = ALIGN(magic_len, 4);
-+
-+ len -= magic_len;
-+ data += magic_len;
-+
-+ /* loop elements */
-+ while (len > sizeof(struct ath10k_fw_ie)) {
-+ hdr = (struct ath10k_fw_ie *)data;
-+
-+ ie_id = le32_to_cpu(hdr->id);
-+ ie_len = le32_to_cpu(hdr->len);
-+
-+ len -= sizeof(*hdr);
-+ data += sizeof(*hdr);
-+
-+ if (len < ie_len) {
-+ ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n",
-+ ie_id, len, ie_len);
-+ ret = -EINVAL;
-+ goto err;
-+ }
-+
-+ switch (ie_id) {
-+ case ATH10K_FW_IE_FW_VERSION:
-+ if (ie_len > sizeof(ar->testmode.utf_version) - 1)
-+ break;
-+
-+ memcpy(ar->testmode.utf_version, data, ie_len);
-+ ar->testmode.utf_version[ie_len] = '\0';
-+
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
-+ "testmode found fw utf version %s\n",
-+ ar->testmode.utf_version);
-+ break;
-+ case ATH10K_FW_IE_TIMESTAMP:
-+ /* ignore timestamp, but don't warn about it either */
-+ break;
-+ case ATH10K_FW_IE_FW_IMAGE:
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE,
-+ "testmode found fw image ie (%zd B)\n",
-+ ie_len);
-+
-+ ar->testmode.utf_firmware_data = data;
-+ ar->testmode.utf_firmware_len = ie_len;
-+ break;
-+ case ATH10K_FW_IE_WMI_OP_VERSION:
-+ if (ie_len != sizeof(u32))
-+ break;
-+ version = (__le32 *)data;
-+ ar->testmode.op_version = le32_to_cpup(version);
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode found fw ie wmi op version %d\n",
-+ ar->testmode.op_version);
-+ break;
-+ default:
-+ ath10k_warn(ar, "Unknown testmode FW IE: %u\n",
-+ le32_to_cpu(hdr->id));
-+ break;
-+ }
-+ /* jump over the padding */
-+ ie_len = ALIGN(ie_len, 4);
-+
-+ len -= ie_len;
-+ data += ie_len;
-+ }
-+
-+ if (!ar->testmode.utf_firmware_data || !ar->testmode.utf_firmware_len) {
-+ ath10k_err(ar, "No ATH10K_FW_IE_FW_IMAGE found\n");
-+ ret = -EINVAL;
-+ goto err;
-+ }
-+
-+ return 0;
-+
-+err:
-+ release_firmware(ar->testmode.utf);
-+
-+ return ret;
-+}
-+
-+static int ath10k_tm_fetch_utf_firmware_api_1(struct ath10k *ar)
- {
- char filename[100];
- int ret;
-
-+ snprintf(filename, sizeof(filename), "%s/%s",
-+ ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
-+
-+ /* load utf firmware image */
-+ ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
-+ if (ret) {
-+ ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
-+ filename, ret);
-+ return ret;
-+ }
-+
-+ /* We didn't find FW UTF API 1 ("utf.bin") does not advertise
-+ * firmware features. Do an ugly hack where we force the firmware
-+ * features to match with 10.1 branch so that wmi.c will use the
-+ * correct WMI interface.
-+ */
-+
-+ ar->testmode.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
-+ ar->testmode.utf_firmware_data = ar->testmode.utf->data;
-+ ar->testmode.utf_firmware_len = ar->testmode.utf->size;
-+
-+ return 0;
-+}
-+
-+static int ath10k_tm_fetch_firmware(struct ath10k *ar)
-+{
-+ int ret;
-+
-+ ret = ath10k_tm_fetch_utf_firmware_api_2(ar);
-+ if (ret == 0) {
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using fw utf api 2");
-+ return 0;
-+ }
-+
-+ ret = ath10k_tm_fetch_utf_firmware_api_1(ar);
-+ if (ret) {
-+ ath10k_err(ar, "failed to fetch utf firmware binary: %d", ret);
-+ return ret;
-+ }
-+
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode using utf api 1");
-+
-+ return 0;
-+}
-+
-+static int ath10k_tm_cmd_utf_start(struct ath10k *ar, struct nlattr *tb[])
-+{
-+ const char *ver;
-+ int ret;
-+
- ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode cmd utf start\n");
-
- mutex_lock(&ar->conf_mutex);
-@@ -165,36 +335,27 @@ static int ath10k_tm_cmd_utf_start(struc
- goto err;
- }
-
-- snprintf(filename, sizeof(filename), "%s/%s",
-- ar->hw_params.fw.dir, ATH10K_FW_UTF_FILE);
--
-- /* load utf firmware image */
-- ret = request_firmware(&ar->testmode.utf, filename, ar->dev);
-+ ret = ath10k_tm_fetch_firmware(ar);
- if (ret) {
-- ath10k_warn(ar, "failed to retrieve utf firmware '%s': %d\n",
-- filename, ret);
-+ ath10k_err(ar, "failed to fetch UTF firmware: %d", ret);
- goto err;
- }
-
- spin_lock_bh(&ar->data_lock);
--
- ar->testmode.utf_monitor = true;
--
- spin_unlock_bh(&ar->data_lock);
--
- BUILD_BUG_ON(sizeof(ar->fw_features) !=
- sizeof(ar->testmode.orig_fw_features));
-
- memcpy(ar->testmode.orig_fw_features, ar->fw_features,
- sizeof(ar->fw_features));
- ar->testmode.orig_wmi_op_version = ar->wmi.op_version;
--
-- /* utf.bin firmware image does not advertise firmware features. Do
-- * an ugly hack where we force the firmware features so that wmi.c
-- * will use the correct WMI interface.
-- */
- memset(ar->fw_features, 0, sizeof(ar->fw_features));
-- ar->wmi.op_version = ATH10K_FW_WMI_OP_VERSION_10_1;
-+
-+ ar->wmi.op_version = ar->testmode.op_version;
-+
-+ ath10k_dbg(ar, ATH10K_DBG_TESTMODE, "testmode wmi version %d\n",
-+ ar->wmi.op_version);
-
- ret = ath10k_hif_power_up(ar);
- if (ret) {
-@@ -212,7 +373,12 @@ static int ath10k_tm_cmd_utf_start(struc
-
- ar->state = ATH10K_STATE_UTF;
-
-- ath10k_info(ar, "UTF firmware started\n");
-+ if (strlen(ar->testmode.utf_version) > 0)
-+ ver = ar->testmode.utf_version;
-+ else
-+ ver = "API 1";
-+
-+ ath10k_info(ar, "UTF firmware %s started\n", ver);
-
- mutex_unlock(&ar->conf_mutex);
-
---- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -23,6 +23,7 @@
- #include "wmi-ops.h"
- #include "wmi-tlv.h"
- #include "p2p.h"
-+#include "testmode.h"
-
- /***************/
- /* TLV helpers */
-@@ -419,6 +420,7 @@ static void ath10k_wmi_tlv_op_rx(struct
- {
- struct wmi_cmd_hdr *cmd_hdr;
- enum wmi_tlv_event_id id;
-+ bool consumed;
-
- cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
- id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
-@@ -428,6 +430,18 @@ static void ath10k_wmi_tlv_op_rx(struct
-
- trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
-
-+ consumed = ath10k_tm_event_wmi(ar, id, skb);
-+
-+ /* Ready event must be handled normally also in UTF mode so that we
-+ * know the UTF firmware has booted, others we are just bypass WMI
-+ * events to testmode.
-+ */
-+ if (consumed && id != WMI_TLV_READY_EVENTID) {
-+ ath10k_dbg(ar, ATH10K_DBG_WMI,
-+ "wmi tlv testmode consumed 0x%x\n", id);
-+ goto out;
-+ }
-+
- switch (id) {
- case WMI_TLV_MGMT_RX_EVENTID:
- ath10k_wmi_event_mgmt_rx(ar, skb);
+++ /dev/null
-From: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
-Date: Wed, 28 Oct 2015 21:38:33 +0200
-Subject: [PATCH] ath10k: add fw_stats support to 10.4 firmware
-
-This patch adds support for getting firmware debug stats in 10.4 fw.
-
-Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
-Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/core.h
-+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -214,6 +214,7 @@ struct ath10k_fw_stats_pdev {
- s32 hw_queued;
- s32 hw_reaped;
- s32 underrun;
-+ u32 hw_paused;
- s32 tx_abort;
- s32 mpdus_requed;
- u32 tx_ko;
-@@ -226,6 +227,16 @@ struct ath10k_fw_stats_pdev {
- u32 pdev_resets;
- u32 phy_underrun;
- u32 txop_ovf;
-+ u32 seq_posted;
-+ u32 seq_failed_queueing;
-+ u32 seq_completed;
-+ u32 seq_restarted;
-+ u32 mu_seq_posted;
-+ u32 mpdus_sw_flush;
-+ u32 mpdus_hw_filter;
-+ u32 mpdus_truncated;
-+ u32 mpdus_ack_failed;
-+ u32 mpdus_expired;
-
- /* PDEV RX stats */
- s32 mid_ppdu_route_change;
-@@ -242,6 +253,7 @@ struct ath10k_fw_stats_pdev {
- s32 phy_errs;
- s32 phy_err_drop;
- s32 mpdu_errs;
-+ s32 rx_ovfl_errs;
- };
-
- struct ath10k_fw_stats {
---- a/drivers/net/wireless/ath/ath10k/wmi.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -2479,6 +2479,47 @@ void ath10k_wmi_pull_pdev_stats_tx(const
- dst->txop_ovf = __le32_to_cpu(src->txop_ovf);
- }
-
-+static void
-+ath10k_wmi_10_4_pull_pdev_stats_tx(const struct wmi_10_4_pdev_stats_tx *src,
-+ struct ath10k_fw_stats_pdev *dst)
-+{
-+ dst->comp_queued = __le32_to_cpu(src->comp_queued);
-+ dst->comp_delivered = __le32_to_cpu(src->comp_delivered);
-+ dst->msdu_enqued = __le32_to_cpu(src->msdu_enqued);
-+ dst->mpdu_enqued = __le32_to_cpu(src->mpdu_enqued);
-+ dst->wmm_drop = __le32_to_cpu(src->wmm_drop);
-+ dst->local_enqued = __le32_to_cpu(src->local_enqued);
-+ dst->local_freed = __le32_to_cpu(src->local_freed);
-+ dst->hw_queued = __le32_to_cpu(src->hw_queued);
-+ dst->hw_reaped = __le32_to_cpu(src->hw_reaped);
-+ dst->underrun = __le32_to_cpu(src->underrun);
-+ dst->tx_abort = __le32_to_cpu(src->tx_abort);
-+ dst->mpdus_requed = __le32_to_cpu(src->mpdus_requed);
-+ dst->tx_ko = __le32_to_cpu(src->tx_ko);
-+ dst->data_rc = __le32_to_cpu(src->data_rc);
-+ dst->self_triggers = __le32_to_cpu(src->self_triggers);
-+ dst->sw_retry_failure = __le32_to_cpu(src->sw_retry_failure);
-+ dst->illgl_rate_phy_err = __le32_to_cpu(src->illgl_rate_phy_err);
-+ dst->pdev_cont_xretry = __le32_to_cpu(src->pdev_cont_xretry);
-+ dst->pdev_tx_timeout = __le32_to_cpu(src->pdev_tx_timeout);
-+ dst->pdev_resets = __le32_to_cpu(src->pdev_resets);
-+ dst->phy_underrun = __le32_to_cpu(src->phy_underrun);
-+ dst->txop_ovf = __le32_to_cpu(src->txop_ovf);
-+ dst->hw_paused = __le32_to_cpu(src->hw_paused);
-+ dst->seq_posted = __le32_to_cpu(src->seq_posted);
-+ dst->seq_failed_queueing =
-+ __le32_to_cpu(src->seq_failed_queueing);
-+ dst->seq_completed = __le32_to_cpu(src->seq_completed);
-+ dst->seq_restarted = __le32_to_cpu(src->seq_restarted);
-+ dst->mu_seq_posted = __le32_to_cpu(src->mu_seq_posted);
-+ dst->mpdus_sw_flush = __le32_to_cpu(src->mpdus_sw_flush);
-+ dst->mpdus_hw_filter = __le32_to_cpu(src->mpdus_hw_filter);
-+ dst->mpdus_truncated = __le32_to_cpu(src->mpdus_truncated);
-+ dst->mpdus_ack_failed = __le32_to_cpu(src->mpdus_ack_failed);
-+ dst->mpdus_hw_filter = __le32_to_cpu(src->mpdus_hw_filter);
-+ dst->mpdus_expired = __le32_to_cpu(src->mpdus_expired);
-+}
-+
- void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
- struct ath10k_fw_stats_pdev *dst)
- {
-@@ -2789,6 +2830,86 @@ static int ath10k_wmi_10_2_4_op_pull_fw_
- return 0;
- }
-
-+static int ath10k_wmi_10_4_op_pull_fw_stats(struct ath10k *ar,
-+ struct sk_buff *skb,
-+ struct ath10k_fw_stats *stats)
-+{
-+ const struct wmi_10_2_stats_event *ev = (void *)skb->data;
-+ u32 num_pdev_stats;
-+ u32 num_pdev_ext_stats;
-+ u32 num_vdev_stats;
-+ u32 num_peer_stats;
-+ int i;
-+
-+ if (!skb_pull(skb, sizeof(*ev)))
-+ return -EPROTO;
-+
-+ num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats);
-+ num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
-+ num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
-+ num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
-+
-+ for (i = 0; i < num_pdev_stats; i++) {
-+ const struct wmi_10_4_pdev_stats *src;
-+ struct ath10k_fw_stats_pdev *dst;
-+
-+ src = (void *)skb->data;
-+ if (!skb_pull(skb, sizeof(*src)))
-+ return -EPROTO;
-+
-+ dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
-+ if (!dst)
-+ continue;
-+
-+ ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
-+ ath10k_wmi_10_4_pull_pdev_stats_tx(&src->tx, dst);
-+ ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
-+ dst->rx_ovfl_errs = __le32_to_cpu(src->rx_ovfl_errs);
-+ ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
-+
-+ list_add_tail(&dst->list, &stats->pdevs);
-+ }
-+
-+ for (i = 0; i < num_pdev_ext_stats; i++) {
-+ const struct wmi_10_2_pdev_ext_stats *src;
-+
-+ src = (void *)skb->data;
-+ if (!skb_pull(skb, sizeof(*src)))
-+ return -EPROTO;
-+
-+ /* FIXME: expose values to userspace
-+ *
-+ * Note: Even though this loop seems to do nothing it is
-+ * required to parse following sub-structures properly.
-+ */
-+ }
-+
-+ /* fw doesn't implement vdev stats */
-+
-+ for (i = 0; i < num_peer_stats; i++) {
-+ const struct wmi_10_4_peer_stats *src;
-+ struct ath10k_fw_stats_peer *dst;
-+
-+ src = (void *)skb->data;
-+ if (!skb_pull(skb, sizeof(*src)))
-+ return -EPROTO;
-+
-+ dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
-+ if (!dst)
-+ continue;
-+
-+ ether_addr_copy(dst->peer_macaddr, src->peer_macaddr.addr);
-+ dst->peer_rssi = __le32_to_cpu(src->peer_rssi);
-+ dst->peer_tx_rate = __le32_to_cpu(src->peer_tx_rate);
-+ dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
-+ /* FIXME: expose 10.4 specific values */
-+
-+ list_add_tail(&dst->list, &stats->peers);
-+ }
-+
-+ return 0;
-+}
-+
- void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb)
- {
- ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_UPDATE_STATS_EVENTID\n");
-@@ -4935,6 +5056,9 @@ static void ath10k_wmi_10_4_op_rx(struct
- ath10k_dbg(ar, ATH10K_DBG_WMI,
- "received event id %d not implemented\n", id);
- break;
-+ case WMI_10_4_UPDATE_STATS_EVENTID:
-+ ath10k_wmi_event_update_stats(ar, skb);
-+ break;
- default:
- ath10k_warn(ar, "Unknown eventid: %d\n", id);
- break;
-@@ -7022,6 +7146,90 @@ ath10k_wmi_op_gen_pdev_enable_adaptive_c
- return skb;
- }
-
-+void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
-+ struct ath10k_fw_stats *fw_stats,
-+ char *buf)
-+{
-+ u32 len = 0;
-+ u32 buf_len = ATH10K_FW_STATS_BUF_SIZE;
-+ const struct ath10k_fw_stats_pdev *pdev;
-+ const struct ath10k_fw_stats_vdev *vdev;
-+ const struct ath10k_fw_stats_peer *peer;
-+ size_t num_peers;
-+ size_t num_vdevs;
-+
-+ spin_lock_bh(&ar->data_lock);
-+
-+ pdev = list_first_entry_or_null(&fw_stats->pdevs,
-+ struct ath10k_fw_stats_pdev, list);
-+ if (!pdev) {
-+ ath10k_warn(ar, "failed to get pdev stats\n");
-+ goto unlock;
-+ }
-+
-+ num_peers = ath10k_wmi_fw_stats_num_peers(&fw_stats->peers);
-+ num_vdevs = ath10k_wmi_fw_stats_num_vdevs(&fw_stats->vdevs);
-+
-+ ath10k_wmi_fw_pdev_base_stats_fill(pdev, buf, &len);
-+ ath10k_wmi_fw_pdev_extra_stats_fill(pdev, buf, &len);
-+ ath10k_wmi_fw_pdev_tx_stats_fill(pdev, buf, &len);
-+
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "HW paused", pdev->hw_paused);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "Seqs posted", pdev->seq_posted);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "Seqs failed queueing", pdev->seq_failed_queueing);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "Seqs completed", pdev->seq_completed);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "Seqs restarted", pdev->seq_restarted);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MU Seqs posted", pdev->mu_seq_posted);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MPDUs SW flushed", pdev->mpdus_sw_flush);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MPDUs HW filtered", pdev->mpdus_hw_filter);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MPDUs truncated", pdev->mpdus_truncated);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MPDUs receive no ACK", pdev->mpdus_ack_failed);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "MPDUs expired", pdev->mpdus_expired);
-+
-+ ath10k_wmi_fw_pdev_rx_stats_fill(pdev, buf, &len);
-+ len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
-+ "Num Rx Overflow errors", pdev->rx_ovfl_errs);
-+
-+ len += scnprintf(buf + len, buf_len - len, "\n");
-+ len += scnprintf(buf + len, buf_len - len, "%30s (%zu)\n",
-+ "ath10k VDEV stats", num_vdevs);
-+ len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
-+ "=================");
-+
-+ list_for_each_entry(vdev, &fw_stats->vdevs, list) {
-+ ath10k_wmi_fw_vdev_stats_fill(vdev, buf, &len);
-+ }
-+
-+ len += scnprintf(buf + len, buf_len - len, "\n");
-+ len += scnprintf(buf + len, buf_len - len, "%30s (%zu)\n",
-+ "ath10k PEER stats", num_peers);
-+ len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
-+ "=================");
-+
-+ list_for_each_entry(peer, &fw_stats->peers, list) {
-+ ath10k_wmi_fw_peer_stats_fill(peer, buf, &len);
-+ }
-+
-+unlock:
-+ spin_unlock_bh(&ar->data_lock);
-+
-+ if (len >= buf_len)
-+ buf[len - 1] = 0;
-+ else
-+ buf[len] = 0;
-+}
-+
- static const struct wmi_ops wmi_ops = {
- .rx = ath10k_wmi_op_rx,
- .map_svc = wmi_main_svc_map,
-@@ -7292,6 +7500,7 @@ static const struct wmi_ops wmi_10_4_ops
- .rx = ath10k_wmi_10_4_op_rx,
- .map_svc = wmi_10_4_svc_map,
-
-+ .pull_fw_stats = ath10k_wmi_10_4_op_pull_fw_stats,
- .pull_scan = ath10k_wmi_op_pull_scan_ev,
- .pull_mgmt_rx = ath10k_wmi_10_4_op_pull_mgmt_rx_ev,
- .pull_ch_info = ath10k_wmi_10_4_op_pull_ch_info_ev,
-@@ -7341,9 +7550,11 @@ static const struct wmi_ops wmi_10_4_ops
- .gen_addba_send = ath10k_wmi_op_gen_addba_send,
- .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
- .gen_delba_send = ath10k_wmi_op_gen_delba_send,
-+ .fw_stats_fill = ath10k_wmi_10_4_op_fw_stats_fill,
-
- /* shared with 10.2 */
- .gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
-+ .gen_request_stats = ath10k_wmi_op_gen_request_stats,
- };
-
- int ath10k_wmi_attach(struct ath10k *ar)
---- a/drivers/net/wireless/ath/ath10k/wmi.h
-+++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -3866,6 +3866,111 @@ struct wmi_pdev_stats_tx {
- __le32 txop_ovf;
- } __packed;
-
-+struct wmi_10_4_pdev_stats_tx {
-+ /* Num HTT cookies queued to dispatch list */
-+ __le32 comp_queued;
-+
-+ /* Num HTT cookies dispatched */
-+ __le32 comp_delivered;
-+
-+ /* Num MSDU queued to WAL */
-+ __le32 msdu_enqued;
-+
-+ /* Num MPDU queue to WAL */
-+ __le32 mpdu_enqued;
-+
-+ /* Num MSDUs dropped by WMM limit */
-+ __le32 wmm_drop;
-+
-+ /* Num Local frames queued */
-+ __le32 local_enqued;
-+
-+ /* Num Local frames done */
-+ __le32 local_freed;
-+
-+ /* Num queued to HW */
-+ __le32 hw_queued;
-+
-+ /* Num PPDU reaped from HW */
-+ __le32 hw_reaped;
-+
-+ /* Num underruns */
-+ __le32 underrun;
-+
-+ /* HW Paused. */
-+ __le32 hw_paused;
-+
-+ /* Num PPDUs cleaned up in TX abort */
-+ __le32 tx_abort;
-+
-+ /* Num MPDUs requed by SW */
-+ __le32 mpdus_requed;
-+
-+ /* excessive retries */
-+ __le32 tx_ko;
-+
-+ /* data hw rate code */
-+ __le32 data_rc;
-+
-+ /* Scheduler self triggers */
-+ __le32 self_triggers;
-+
-+ /* frames dropped due to excessive sw retries */
-+ __le32 sw_retry_failure;
-+
-+ /* illegal rate phy errors */
-+ __le32 illgl_rate_phy_err;
-+
-+ /* wal pdev continuous xretry */
-+ __le32 pdev_cont_xretry;
-+
-+ /* wal pdev tx timeouts */
-+ __le32 pdev_tx_timeout;
-+
-+ /* wal pdev resets */
-+ __le32 pdev_resets;
-+
-+ /* frames dropped due to non-availability of stateless TIDs */
-+ __le32 stateless_tid_alloc_failure;
-+
-+ __le32 phy_underrun;
-+
-+ /* MPDU is more than txop limit */
-+ __le32 txop_ovf;
-+
-+ /* Number of Sequences posted */
-+ __le32 seq_posted;
-+
-+ /* Number of Sequences failed queueing */
-+ __le32 seq_failed_queueing;
-+
-+ /* Number of Sequences completed */
-+ __le32 seq_completed;
-+
-+ /* Number of Sequences restarted */
-+ __le32 seq_restarted;
-+
-+ /* Number of MU Sequences posted */
-+ __le32 mu_seq_posted;
-+
-+ /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
-+ __le32 mpdus_sw_flush;
-+
-+ /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
-+ __le32 mpdus_hw_filter;
-+
-+ /* Num MPDUs truncated by PDG
-+ * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
-+ */
-+ __le32 mpdus_truncated;
-+
-+ /* Num MPDUs that was tried but didn't receive ACK or BA */
-+ __le32 mpdus_ack_failed;
-+
-+ /* Num MPDUs that was dropped due to expiry. */
-+ __le32 mpdus_expired;
-+} __packed;
-+
- struct wmi_pdev_stats_rx {
- /* Cnts any change in ring routing mid-ppdu */
- __le32 mid_ppdu_route_change;
-@@ -4039,6 +4144,16 @@ struct wmi_10_2_pdev_stats {
- struct wmi_pdev_stats_extra extra;
- } __packed;
-
-+struct wmi_10_4_pdev_stats {
-+ struct wmi_pdev_stats_base base;
-+ struct wmi_10_4_pdev_stats_tx tx;
-+ struct wmi_pdev_stats_rx rx;
-+ __le32 rx_ovfl_errs;
-+ struct wmi_pdev_stats_mem mem;
-+ __le32 sram_free_size;
-+ struct wmi_pdev_stats_extra extra;
-+} __packed;
-+
- /*
- * VDEV statistics
- * TODO: add all VDEV stats here
-@@ -4080,6 +4195,23 @@ struct wmi_10_2_4_peer_stats {
- __le32 unknown_value; /* FIXME: what is this word? */
- } __packed;
-
-+struct wmi_10_4_peer_stats {
-+ struct wmi_mac_addr peer_macaddr;
-+ __le32 peer_rssi;
-+ __le32 peer_rssi_seq_num;
-+ __le32 peer_tx_rate;
-+ __le32 peer_rx_rate;
-+ __le32 current_per;
-+ __le32 retries;
-+ __le32 tx_rate_count;
-+ __le32 max_4ms_frame_len;
-+ __le32 total_sub_frames;
-+ __le32 tx_bytes;
-+ __le32 num_pkt_loss_overflow[4];
-+ __le32 num_pkt_loss_excess_retry[4];
-+ __le32 peer_rssi_changed;
-+} __packed;
-+
- struct wmi_10_2_pdev_ext_stats {
- __le32 rx_rssi_comb;
- __le32 rx_rssi[4];
-@@ -6201,5 +6333,8 @@ void ath10k_wmi_10x_op_fw_stats_fill(str
- char *buf);
- size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
- size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
-+void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
-+ struct ath10k_fw_stats *fw_stats,
-+ char *buf);
-
- #endif /* _WMI_H_ */
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Fri, 23 Oct 2015 18:01:03 +0530
-Subject: [PATCH] ath10k: use local memory instead of shadow descriptor
- in ce_send
-
-Currently to avoid uncached memory access while filling up copy engine
-descriptors, shadow descriptors are used. This can be optimized further
-by removing shadow descriptors. To achieve that first shadow ring
-dependency in ce_send is removed by creating local copy of the
-descriptor on stack and make a one-shot copy into the "uncached"
-descriptor.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/ce.c
-+++ b/drivers/net/wireless/ath/ath10k/ce.c
-@@ -274,7 +274,7 @@ int ath10k_ce_send_nolock(struct ath10k_
- {
- struct ath10k *ar = ce_state->ar;
- struct ath10k_ce_ring *src_ring = ce_state->src_ring;
-- struct ce_desc *desc, *sdesc;
-+ struct ce_desc *desc, sdesc;
- unsigned int nentries_mask = src_ring->nentries_mask;
- unsigned int sw_index = src_ring->sw_index;
- unsigned int write_index = src_ring->write_index;
-@@ -294,7 +294,6 @@ int ath10k_ce_send_nolock(struct ath10k_
-
- desc = CE_SRC_RING_TO_DESC(src_ring->base_addr_owner_space,
- write_index);
-- sdesc = CE_SRC_RING_TO_DESC(src_ring->shadow_base, write_index);
-
- desc_flags |= SM(transfer_id, CE_DESC_FLAGS_META_DATA);
-
-@@ -303,11 +302,11 @@ int ath10k_ce_send_nolock(struct ath10k_
- if (flags & CE_SEND_FLAG_BYTE_SWAP)
- desc_flags |= CE_DESC_FLAGS_BYTE_SWAP;
-
-- sdesc->addr = __cpu_to_le32(buffer);
-- sdesc->nbytes = __cpu_to_le16(nbytes);
-- sdesc->flags = __cpu_to_le16(desc_flags);
-+ sdesc.addr = __cpu_to_le32(buffer);
-+ sdesc.nbytes = __cpu_to_le16(nbytes);
-+ sdesc.flags = __cpu_to_le16(desc_flags);
-
-- *desc = *sdesc;
-+ *desc = sdesc;
-
- src_ring->per_transfer_context[write_index] = per_transfer_context;
-
-@@ -614,7 +613,7 @@ int ath10k_ce_completed_send_next_nolock
- if (read_index == sw_index)
- return -EIO;
-
-- sbase = src_ring->shadow_base;
-+ sbase = src_ring->base_addr_owner_space;
- sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
-
- /* Return data from completed source descriptor */
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Fri, 23 Oct 2015 18:01:04 +0530
-Subject: [PATCH] ath10k: remove send completion validation in diag
- read/write
-
-CE diag window access is serialized (it has to be by design) so
-there's no way to get a different send completion. so there's no
-need for post completion validation.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -920,16 +920,6 @@ static int ath10k_pci_diag_read_mem(stru
- }
- }
-
-- if (nbytes != completed_nbytes) {
-- ret = -EIO;
-- goto done;
-- }
--
-- if (buf != (u32)address) {
-- ret = -EIO;
-- goto done;
-- }
--
- i = 0;
- while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
- &completed_nbytes,
-@@ -1094,16 +1084,6 @@ static int ath10k_pci_diag_write_mem(str
- }
- }
-
-- if (nbytes != completed_nbytes) {
-- ret = -EIO;
-- goto done;
-- }
--
-- if (buf != ce_data) {
-- ret = -EIO;
-- goto done;
-- }
--
- i = 0;
- while (ath10k_ce_completed_recv_next_nolock(ce_diag, NULL, &buf,
- &completed_nbytes,
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Fri, 23 Oct 2015 18:01:05 +0530
-Subject: [PATCH] ath10k: cleanup copy engine send completion
-
-The physical address necessary to unmap DMA ('bufferp') is stored
-in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id
-when handling send completion (htc ep id is stored in sk_buff control
-buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp}
-are removed from CE send completion. This change is needed before removing
-the shadow copy of copy engine (CE) descriptors in follow up patch.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/ce.c
-+++ b/drivers/net/wireless/ath/ath10k/ce.c
-@@ -578,17 +578,13 @@ int ath10k_ce_revoke_recv_next(struct at
- * The caller takes responsibility for any necessary locking.
- */
- int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-- void **per_transfer_contextp,
-- u32 *bufferp,
-- unsigned int *nbytesp,
-- unsigned int *transfer_idp)
-+ void **per_transfer_contextp)
- {
- struct ath10k_ce_ring *src_ring = ce_state->src_ring;
- u32 ctrl_addr = ce_state->ctrl_addr;
- struct ath10k *ar = ce_state->ar;
- unsigned int nentries_mask = src_ring->nentries_mask;
- unsigned int sw_index = src_ring->sw_index;
-- struct ce_desc *sdesc, *sbase;
- unsigned int read_index;
-
- if (src_ring->hw_index == sw_index) {
-@@ -613,15 +609,6 @@ int ath10k_ce_completed_send_next_nolock
- if (read_index == sw_index)
- return -EIO;
-
-- sbase = src_ring->base_addr_owner_space;
-- sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index);
--
-- /* Return data from completed source descriptor */
-- *bufferp = __le32_to_cpu(sdesc->addr);
-- *nbytesp = __le16_to_cpu(sdesc->nbytes);
-- *transfer_idp = MS(__le16_to_cpu(sdesc->flags),
-- CE_DESC_FLAGS_META_DATA);
--
- if (per_transfer_contextp)
- *per_transfer_contextp =
- src_ring->per_transfer_context[sw_index];
-@@ -696,10 +683,7 @@ int ath10k_ce_cancel_send_next(struct at
- }
-
- int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-- void **per_transfer_contextp,
-- u32 *bufferp,
-- unsigned int *nbytesp,
-- unsigned int *transfer_idp)
-+ void **per_transfer_contextp)
- {
- struct ath10k *ar = ce_state->ar;
- struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-@@ -707,9 +691,7 @@ int ath10k_ce_completed_send_next(struct
-
- spin_lock_bh(&ar_pci->ce_lock);
- ret = ath10k_ce_completed_send_next_nolock(ce_state,
-- per_transfer_contextp,
-- bufferp, nbytesp,
-- transfer_idp);
-+ per_transfer_contextp);
- spin_unlock_bh(&ar_pci->ce_lock);
-
- return ret;
---- a/drivers/net/wireless/ath/ath10k/ce.h
-+++ b/drivers/net/wireless/ath/ath10k/ce.h
-@@ -192,16 +192,10 @@ int ath10k_ce_completed_recv_next(struct
- * Pops 1 completed send buffer from Source ring.
- */
- int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state,
-- void **per_transfer_contextp,
-- u32 *bufferp,
-- unsigned int *nbytesp,
-- unsigned int *transfer_idp);
-+ void **per_transfer_contextp);
-
- int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state,
-- void **per_transfer_contextp,
-- u32 *bufferp,
-- unsigned int *nbytesp,
-- unsigned int *transfer_idp);
-+ void **per_transfer_contextp);
-
- /*==================CE Engine Initialization=======================*/
-
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -910,9 +910,8 @@ static int ath10k_pci_diag_read_mem(stru
- goto done;
-
- i = 0;
-- while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-- &completed_nbytes,
-- &id) != 0) {
-+ while (ath10k_ce_completed_send_next_nolock(ce_diag,
-+ NULL) != 0) {
- mdelay(1);
- if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
- ret = -EBUSY;
-@@ -1073,9 +1072,8 @@ static int ath10k_pci_diag_write_mem(str
- goto done;
-
- i = 0;
-- while (ath10k_ce_completed_send_next_nolock(ce_diag, NULL, &buf,
-- &completed_nbytes,
-- &id) != 0) {
-+ while (ath10k_ce_completed_send_next_nolock(ce_diag,
-+ NULL) != 0) {
- mdelay(1);
-
- if (i++ > DIAG_ACCESS_CE_TIMEOUT_MS) {
-@@ -1139,13 +1137,9 @@ static void ath10k_pci_htc_tx_cb(struct
- struct ath10k *ar = ce_state->ar;
- struct sk_buff_head list;
- struct sk_buff *skb;
-- u32 ce_data;
-- unsigned int nbytes;
-- unsigned int transfer_id;
-
- __skb_queue_head_init(&list);
-- while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-- &nbytes, &transfer_id) == 0) {
-+ while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
- /* no need to call tx completion for NULL pointers */
- if (skb == NULL)
- continue;
-@@ -1215,12 +1209,8 @@ static void ath10k_pci_htt_tx_cb(struct
- {
- struct ath10k *ar = ce_state->ar;
- struct sk_buff *skb;
-- u32 ce_data;
-- unsigned int nbytes;
-- unsigned int transfer_id;
-
-- while (ath10k_ce_completed_send_next(ce_state, (void **)&skb, &ce_data,
-- &nbytes, &transfer_id) == 0) {
-+ while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
- /* no need to call tx completion for NULL pointers */
- if (!skb)
- continue;
-@@ -1796,12 +1786,8 @@ err_dma:
- static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
- {
- struct bmi_xfer *xfer;
-- u32 ce_data;
-- unsigned int nbytes;
-- unsigned int transfer_id;
-
-- if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data,
-- &nbytes, &transfer_id))
-+ if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer))
- return;
-
- xfer->tx_done = true;
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Fri, 23 Oct 2015 18:01:06 +0530
-Subject: [PATCH] ath10k: remove shadow copy of CE descriptors for source
- ring
-
-For the messages from host to target, shadow copy of CE descriptors
-are maintained in source ring. Before writing actual CE descriptor,
-first shadow copy is filled and then it is copied to CE address space.
-To optimize in download path and to reduce d-cache pressure, removing
-shadow copy of CE descriptors. This will also reduce driver memory
-consumption by 33KB during on device probing.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/ce.c
-+++ b/drivers/net/wireless/ath/ath10k/ce.c
-@@ -921,27 +921,6 @@ ath10k_ce_alloc_src_ring(struct ath10k *
- src_ring->base_addr_ce_space_unaligned,
- CE_DESC_RING_ALIGN);
-
-- /*
-- * Also allocate a shadow src ring in regular
-- * mem to use for faster access.
-- */
-- src_ring->shadow_base_unaligned =
-- kmalloc((nentries * sizeof(struct ce_desc) +
-- CE_DESC_RING_ALIGN), GFP_KERNEL);
-- if (!src_ring->shadow_base_unaligned) {
-- dma_free_coherent(ar->dev,
-- (nentries * sizeof(struct ce_desc) +
-- CE_DESC_RING_ALIGN),
-- src_ring->base_addr_owner_space,
-- src_ring->base_addr_ce_space);
-- kfree(src_ring);
-- return ERR_PTR(-ENOMEM);
-- }
--
-- src_ring->shadow_base = PTR_ALIGN(
-- src_ring->shadow_base_unaligned,
-- CE_DESC_RING_ALIGN);
--
- return src_ring;
- }
-
-@@ -1120,7 +1099,6 @@ void ath10k_ce_free_pipe(struct ath10k *
- struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
-
- if (ce_state->src_ring) {
-- kfree(ce_state->src_ring->shadow_base_unaligned);
- dma_free_coherent(ar->dev,
- (ce_state->src_ring->nentries *
- sizeof(struct ce_desc) +
---- a/drivers/net/wireless/ath/ath10k/ce.h
-+++ b/drivers/net/wireless/ath/ath10k/ce.h
-@@ -100,12 +100,6 @@ struct ath10k_ce_ring {
-
- /* CE address space */
- u32 base_addr_ce_space;
-- /*
-- * Start of shadow copy of descriptors, within regular memory.
-- * Aligned to descriptor-size boundary.
-- */
-- void *shadow_base_unaligned;
-- struct ce_desc *shadow_base;
-
- /* keep last */
- void *per_transfer_context[0];
---- a/drivers/net/wireless/ath/ath10k/pci.c
-+++ b/drivers/net/wireless/ath/ath10k/pci.c
-@@ -1594,7 +1594,6 @@ static void ath10k_pci_tx_pipe_cleanup(s
- struct ath10k_pci *ar_pci;
- struct ath10k_ce_pipe *ce_pipe;
- struct ath10k_ce_ring *ce_ring;
-- struct ce_desc *ce_desc;
- struct sk_buff *skb;
- int i;
-
-@@ -1609,10 +1608,6 @@ static void ath10k_pci_tx_pipe_cleanup(s
- if (!pci_pipe->buf_sz)
- return;
-
-- ce_desc = ce_ring->shadow_base;
-- if (WARN_ON(!ce_desc))
-- return;
--
- for (i = 0; i < ce_ring->nentries; i++) {
- skb = ce_ring->per_transfer_context[i];
- if (!skb)
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Tue, 27 Oct 2015 17:51:11 +0530
-Subject: [PATCH] ath10k: remove supported chain mask
-
-Removing supported chainmask fields as it can be always derived
-from num_rf_chains.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/core.h
-+++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -745,8 +745,6 @@ struct ath10k {
- int num_started_vdevs;
-
- /* Protected by conf-mutex */
-- u8 supp_tx_chainmask;
-- u8 supp_rx_chainmask;
- u8 cfg_tx_chainmask;
- u8 cfg_rx_chainmask;
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -3736,13 +3736,8 @@ static int ath10k_get_antenna(struct iee
-
- mutex_lock(&ar->conf_mutex);
-
-- if (ar->cfg_tx_chainmask) {
-- *tx_ant = ar->cfg_tx_chainmask;
-- *rx_ant = ar->cfg_rx_chainmask;
-- } else {
-- *tx_ant = ar->supp_tx_chainmask;
-- *rx_ant = ar->supp_rx_chainmask;
-- }
-+ *tx_ant = ar->cfg_tx_chainmask;
-+ *rx_ant = ar->cfg_rx_chainmask;
-
- mutex_unlock(&ar->conf_mutex);
-
-@@ -3884,9 +3879,7 @@ static int ath10k_start(struct ieee80211
- }
- }
-
-- if (ar->cfg_tx_chainmask)
-- __ath10k_set_antenna(ar, ar->cfg_tx_chainmask,
-- ar->cfg_rx_chainmask);
-+ __ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask);
-
- /*
- * By default FW set ARP frames ac to voice (6). In that case ARP
-@@ -7169,8 +7162,8 @@ int ath10k_mac_register(struct ath10k *a
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_MESH_POINT);
-
-- ar->hw->wiphy->available_antennas_rx = ar->supp_rx_chainmask;
-- ar->hw->wiphy->available_antennas_tx = ar->supp_tx_chainmask;
-+ ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask;
-+ ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask;
-
- if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->fw_features))
- ar->hw->wiphy->interface_modes |=
---- a/drivers/net/wireless/ath/ath10k/wmi.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -4460,8 +4460,10 @@ static void ath10k_wmi_event_service_rea
- ar->num_rf_chains = ar->max_spatial_stream;
- }
-
-- ar->supp_tx_chainmask = (1 << ar->num_rf_chains) - 1;
-- ar->supp_rx_chainmask = (1 << ar->num_rf_chains) - 1;
-+ if (!ar->cfg_tx_chainmask) {
-+ ar->cfg_tx_chainmask = (1 << ar->num_rf_chains) - 1;
-+ ar->cfg_rx_chainmask = (1 << ar->num_rf_chains) - 1;
-+ }
-
- if (strlen(ar->hw->wiphy->fw_version) == 0) {
- snprintf(ar->hw->wiphy->fw_version,
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Tue, 27 Oct 2015 17:51:12 +0530
-Subject: [PATCH] ath10k: fill HT/VHT MCS rateset only for configured
- chainmask
-
-HT/VHT MCS rateset should be filled only for configured chainmask
-rather that max supported chainmask. Fix that by checking configured
-chainmask while filling HT/VHT MCS rate map.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -6984,7 +6984,7 @@ static struct ieee80211_sta_vht_cap ath1
-
- mcs_map = 0;
- for (i = 0; i < 8; i++) {
-- if (i < ar->num_rf_chains)
-+ if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
- mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
- else
- mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
-@@ -7051,8 +7051,10 @@ static struct ieee80211_sta_ht_cap ath10
- if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
- ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
-
-- for (i = 0; i < ar->num_rf_chains; i++)
-- ht_cap.mcs.rx_mask[i] = 0xFF;
-+ for (i = 0; i < ar->num_rf_chains; i++) {
-+ if (ar->cfg_rx_chainmask & BIT(i))
-+ ht_cap.mcs.rx_mask[i] = 0xFF;
-+ }
-
- ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-
+++ /dev/null
-From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Date: Tue, 27 Oct 2015 17:51:13 +0530
-Subject: [PATCH] ath10k: move static HT/VHT capability setup functions
-
-Move HT and VHT capabiltity setup static functions to avoid
-forward declaration.
-
-Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -3757,6 +3757,146 @@ static void ath10k_check_chain_mask(stru
- dbg, cm);
- }
-
-+static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
-+{
-+ int nsts = ar->vht_cap_info;
-+
-+ nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
-+ nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
-+
-+ /* If firmware does not deliver to host number of space-time
-+ * streams supported, assume it support up to 4 BF STS and return
-+ * the value for VHT CAP: nsts-1)
-+ */
-+ if (nsts == 0)
-+ return 3;
-+
-+ return nsts;
-+}
-+
-+static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
-+{
-+ int sound_dim = ar->vht_cap_info;
-+
-+ sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
-+ sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
-+
-+ /* If the sounding dimension is not advertised by the firmware,
-+ * let's use a default value of 1
-+ */
-+ if (sound_dim == 0)
-+ return 1;
-+
-+ return sound_dim;
-+}
-+
-+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
-+{
-+ struct ieee80211_sta_vht_cap vht_cap = {0};
-+ u16 mcs_map;
-+ u32 val;
-+ int i;
-+
-+ vht_cap.vht_supported = 1;
-+ vht_cap.cap = ar->vht_cap_info;
-+
-+ if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
-+ IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
-+ val = ath10k_mac_get_vht_cap_bf_sts(ar);
-+ val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
-+ val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
-+
-+ vht_cap.cap |= val;
-+ }
-+
-+ if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
-+ IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
-+ val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
-+ val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
-+ val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
-+
-+ vht_cap.cap |= val;
-+ }
-+
-+ mcs_map = 0;
-+ for (i = 0; i < 8; i++) {
-+ if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
-+ mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2);
-+ else
-+ mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2);
-+ }
-+
-+ vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
-+ vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
-+
-+ return vht_cap;
-+}
-+
-+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
-+{
-+ int i;
-+ struct ieee80211_sta_ht_cap ht_cap = {0};
-+
-+ if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
-+ return ht_cap;
-+
-+ ht_cap.ht_supported = 1;
-+ ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-+ ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-+ ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-+ ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
-+ ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
-+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
-+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
-+ u32 smps;
-+
-+ smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
-+ smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
-+
-+ ht_cap.cap |= smps;
-+ }
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
-+ ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
-+ u32 stbc;
-+
-+ stbc = ar->ht_cap_info;
-+ stbc &= WMI_HT_CAP_RX_STBC;
-+ stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
-+ stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
-+ stbc &= IEEE80211_HT_CAP_RX_STBC;
-+
-+ ht_cap.cap |= stbc;
-+ }
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
-+ ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
-+
-+ if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
-+ ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
-+
-+ /* max AMSDU is implicitly taken from vht_cap_info */
-+ if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
-+ ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
-+
-+ for (i = 0; i < ar->num_rf_chains; i++) {
-+ if (ar->cfg_rx_chainmask & BIT(i))
-+ ht_cap.mcs.rx_mask[i] = 0xFF;
-+ }
-+
-+ ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
-+
-+ return ht_cap;
-+}
-+
- static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
- {
- int ret;
-@@ -4068,39 +4208,6 @@ static u32 get_nss_from_chainmask(u16 ch
- return 1;
- }
-
--static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar)
--{
-- int nsts = ar->vht_cap_info;
--
-- nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
-- nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
--
-- /* If firmware does not deliver to host number of space-time
-- * streams supported, assume it support up to 4 BF STS and return
-- * the value for VHT CAP: nsts-1)
-- * */
-- if (nsts == 0)
-- return 3;
--
-- return nsts;
--}
--
--static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar)
--{
-- int sound_dim = ar->vht_cap_info;
--
-- sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
-- sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
--
-- /* If the sounding dimension is not advertised by the firmware,
-- * let's use a default value of 1
-- */
-- if (sound_dim == 0)
-- return 1;
--
-- return sound_dim;
--}
--
- static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
- {
- u32 value = 0;
-@@ -6954,113 +7061,6 @@ static const struct ieee80211_iface_comb
- },
- };
-
--static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
--{
-- struct ieee80211_sta_vht_cap vht_cap = {0};
-- u16 mcs_map;
-- u32 val;
-- int i;
--
-- vht_cap.vht_supported = 1;
-- vht_cap.cap = ar->vht_cap_info;
--
-- if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
-- IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) {
-- val = ath10k_mac_get_vht_cap_bf_sts(ar);
-- val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
-- val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
--
-- vht_cap.cap |= val;
-- }
--
-- if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
-- IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
-- val = ath10k_mac_get_vht_cap_bf_sound_dim(ar);
-- val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
-- val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK;
--
-- vht_cap.cap |= val;
-- }
--
-- mcs_map = 0;
-- for (i = 0; i < 8; i++) {
-- if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
-- mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i*2);
-- else
-- mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i*2);
-- }
--
-- vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
-- vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
--
-- return vht_cap;
--}
--
--static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
--{
-- int i;
-- struct ieee80211_sta_ht_cap ht_cap = {0};
--
-- if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
-- return ht_cap;
--
-- ht_cap.ht_supported = 1;
-- ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
-- ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
-- ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-- ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
-- ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
--
-- if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
-- ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
--
-- if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
-- ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
--
-- if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
-- u32 smps;
--
-- smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
-- smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
--
-- ht_cap.cap |= smps;
-- }
--
-- if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
-- ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
--
-- if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
-- u32 stbc;
--
-- stbc = ar->ht_cap_info;
-- stbc &= WMI_HT_CAP_RX_STBC;
-- stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
-- stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
-- stbc &= IEEE80211_HT_CAP_RX_STBC;
--
-- ht_cap.cap |= stbc;
-- }
--
-- if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
-- ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
--
-- if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
-- ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
--
-- /* max AMSDU is implicitly taken from vht_cap_info */
-- if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
-- ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
--
-- for (i = 0; i < ar->num_rf_chains; i++) {
-- if (ar->cfg_rx_chainmask & BIT(i))
-- ht_cap.mcs.rx_mask[i] = 0xFF;
-- }
--
-- ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
--
-- return ht_cap;
--}
--
- static void ath10k_get_arvif_iter(void *data, u8 *mac,
- struct ieee80211_vif *vif)
- {
+++ /dev/null
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Sat, 24 Oct 2015 21:25:51 +0200
-Subject: [PATCH] mac80211: fix crash on mesh local link ID generation with
- VIFs
-
-llid_in_use needs to be limited to stations of the same VIF, otherwise it
-will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
-sta->mesh set.
-
-Steps to reproduce:
-
- modprobe mac80211_hwsim channels=2
- iw phy phy0 interface add ibss0 type ibss
- iw phy phy0 interface add mesh0 type mp
- iw phy phy1 interface add ibss1 type ibss
- iw phy phy1 interface add mesh1 type mp
- ip link set ibss0 up
- ip link set mesh0 up
- ip link set ibss1 up
- ip link set mesh1 up
- iw dev ibss0 ibss join foo 2412
- iw dev ibss1 ibss join foo 2412
- # Ensure that ibss0 and ibss1 are actually associated; I often need to
- # leave and join the cell on ibss1 a second time.
- iw dev mesh0 mesh join bar
- iw dev mesh1 mesh join bar # crash
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
-
---- a/net/mac80211/mesh_plink.c
-+++ b/net/mac80211/mesh_plink.c
-@@ -686,6 +686,9 @@ static bool llid_in_use(struct ieee80211
-
- rcu_read_lock();
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
-+ if (sdata != sta->sdata)
-+ continue;
-+
- if (!memcmp(&sta->mesh->llid, &llid, sizeof(llid))) {
- in_use = true;
- break;
+++ /dev/null
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 4 Nov 2015 14:09:02 +0100
-Subject: [PATCH] mac80211: don't advertise
- NL80211_FEATURE_FULL_AP_CLIENT_STATE
-
-For now, this feature doesn't actually work. To avoid shipping a
-kernel that has it enabled but where it can't be used disable it
-for now - we can re-enable it when it's fixed.
-
-This partially reverts 44674d9c2267 ("mac80211: advertise support
-for full station state in AP mode").
-
-Cc: Ayala Beker <ayala.beker@intel.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/main.c
-+++ b/net/mac80211/main.c
-@@ -541,8 +541,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
- NL80211_FEATURE_HT_IBSS |
- NL80211_FEATURE_VIF_TXPOWER |
- NL80211_FEATURE_MAC_ON_CREATE |
-- NL80211_FEATURE_USERSPACE_MPM |
-- NL80211_FEATURE_FULL_AP_CLIENT_STATE;
-+ NL80211_FEATURE_USERSPACE_MPM;
-
- if (!ops->hw_scan)
- wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 15 Oct 2015 07:23:25 +0200
-Subject: [PATCH] ssb: pick PCMCIA host code support from b43 driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO.
-Every ssb bus contains cores AKA devices.
-The main idea is to have ssb driver scan/initialize bus and register
-ready-to-use cores. This way ssb drivers can operate on a single core
-mostly ignoring underlaying details.
-
-For some reason PCMCIA support was split between ssb and b43. We got
-PCMCIA host device probing in b43, then bus scanning in ssb and then
-wireless core probing back in b43. The truth is it's very unlikely we
-will ever see PCMCIA ssb device with no 802.11 core but I still don't
-see any advantage of the current architecture.
-
-With proposed change we get the same functionality with a simpler
-architecture, less Kconfig symbols, one killed EXPORT and hopefully
-cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb
-specific code in ssb driver.
-
-This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We
-already use similar solution with b43_pci_bridge.c. I didn't use "b43"
-in name of this new file as in theory any driver can operate on wireless
-core.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- delete mode 100644 drivers/net/wireless/b43/pcmcia.c
- delete mode 100644 drivers/net/wireless/b43/pcmcia.h
- create mode 100644 drivers/ssb/bridge_pcmcia_80211.c
-
---- a/drivers/net/wireless/b43/Kconfig
-+++ b/drivers/net/wireless/b43/Kconfig
-@@ -72,26 +72,6 @@ config B43_PCICORE_AUTOSELECT
- select SSB_DRIVER_PCICORE
- default y
-
--config B43_PCMCIA
-- bool "Broadcom 43xx PCMCIA device support"
-- depends on B43 && B43_SSB && SSB_PCMCIAHOST_POSSIBLE
-- select SSB_PCMCIAHOST
-- ---help---
-- Broadcom 43xx PCMCIA device support.
--
-- Support for 16bit PCMCIA devices.
-- Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
-- devices, but 32bit CardBUS devices. CardBUS devices are supported
-- out of the box by b43.
--
-- With this config option you can drive b43 cards in
-- CompactFlash formfactor in a PCMCIA adaptor.
-- CF b43 cards can sometimes be found in handheld PCs.
--
-- It's safe to select Y here, even if you don't have a B43 PCMCIA device.
--
-- If unsure, say N.
--
- config B43_SDIO
- bool "Broadcom 43xx SDIO device support"
- depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
---- a/drivers/net/wireless/b43/Makefile
-+++ b/drivers/net/wireless/b43/Makefile
-@@ -21,7 +21,6 @@ b43-y += pio.o
- b43-y += rfkill.o
- b43-y += ppr.o
- b43-$(CPTCFG_B43_LEDS) += leds.o
--b43-$(CPTCFG_B43_PCMCIA) += pcmcia.o
- b43-$(CPTCFG_B43_SDIO) += sdio.o
- b43-$(CPTCFG_B43_DEBUG) += debugfs.o
-
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -56,7 +56,6 @@
- #include "sysfs.h"
- #include "xmit.h"
- #include "lo.h"
--#include "pcmcia.h"
- #include "sdio.h"
- #include <linux/mmc/sdio_func.h>
-
-@@ -5850,12 +5849,9 @@ static int __init b43_init(void)
- int err;
-
- b43_debugfs_init();
-- err = b43_pcmcia_init();
-- if (err)
-- goto err_dfs_exit;
- err = b43_sdio_init();
- if (err)
-- goto err_pcmcia_exit;
-+ goto err_dfs_exit;
- #ifdef CPTCFG_B43_BCMA
- err = bcma_driver_register(&b43_bcma_driver);
- if (err)
-@@ -5878,8 +5874,6 @@ err_bcma_driver_exit:
- err_sdio_exit:
- #endif
- b43_sdio_exit();
--err_pcmcia_exit:
-- b43_pcmcia_exit();
- err_dfs_exit:
- b43_debugfs_exit();
- return err;
-@@ -5894,7 +5888,6 @@ static void __exit b43_exit(void)
- bcma_driver_unregister(&b43_bcma_driver);
- #endif
- b43_sdio_exit();
-- b43_pcmcia_exit();
- b43_debugfs_exit();
- }
-
---- a/drivers/net/wireless/b43/pcmcia.h
-+++ /dev/null
-@@ -1,20 +0,0 @@
--#ifndef B43_PCMCIA_H_
--#define B43_PCMCIA_H_
--
--#ifdef CPTCFG_B43_PCMCIA
--
--int b43_pcmcia_init(void);
--void b43_pcmcia_exit(void);
--
--#else /* CPTCFG_B43_PCMCIA */
--
--static inline int b43_pcmcia_init(void)
--{
-- return 0;
--}
--static inline void b43_pcmcia_exit(void)
--{
--}
--
--#endif /* CPTCFG_B43_PCMCIA */
--#endif /* B43_PCMCIA_H_ */
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -5,7 +5,7 @@ ssb-$(CPTCFG_SSB_SPROM) += sprom.o
-
- # host support
- ssb-$(CPTCFG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
--ssb-$(CPTCFG_SSB_PCMCIAHOST) += pcmcia.o
-+ssb-$(CPTCFG_SSB_PCMCIAHOST) += pcmcia.o bridge_pcmcia_80211.o
- ssb-$(CPTCFG_SSB_SDIOHOST) += sdio.o
-
- # built-in drivers
---- /dev/null
-+++ b/drivers/ssb/bridge_pcmcia_80211.c
-@@ -0,0 +1,128 @@
-+/*
-+ * Broadcom 43xx PCMCIA-SSB bridge module
-+ *
-+ * Copyright (c) 2007 Michael Buesch <m@bues.ch>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+
-+#include <pcmcia/cistpl.h>
-+#include <pcmcia/ciscode.h>
-+#include <pcmcia/ds.h>
-+#include <pcmcia/cisreg.h>
-+
-+#include "ssb_private.h"
-+
-+static const struct pcmcia_device_id ssb_host_pcmcia_tbl[] = {
-+ PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
-+ PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
-+ PCMCIA_DEVICE_NULL,
-+};
-+
-+MODULE_DEVICE_TABLE(pcmcia, ssb_host_pcmcia_tbl);
-+
-+static int ssb_host_pcmcia_probe(struct pcmcia_device *dev)
-+{
-+ struct ssb_bus *ssb;
-+ int err = -ENOMEM;
-+ int res = 0;
-+
-+ ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
-+ if (!ssb)
-+ goto out_error;
-+
-+ err = -ENODEV;
-+
-+ dev->config_flags |= CONF_ENABLE_IRQ;
-+
-+ dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 |
-+ WIN_USE_WAIT;
-+ dev->resource[2]->start = 0;
-+ dev->resource[2]->end = SSB_CORE_SIZE;
-+ res = pcmcia_request_window(dev, dev->resource[2], 250);
-+ if (res != 0)
-+ goto err_kfree_ssb;
-+
-+ res = pcmcia_map_mem_page(dev, dev->resource[2], 0);
-+ if (res != 0)
-+ goto err_disable;
-+
-+ if (!dev->irq)
-+ goto err_disable;
-+
-+ res = pcmcia_enable_device(dev);
-+ if (res != 0)
-+ goto err_disable;
-+
-+ err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start);
-+ if (err)
-+ goto err_disable;
-+ dev->priv = ssb;
-+
-+ return 0;
-+
-+err_disable:
-+ pcmcia_disable_device(dev);
-+err_kfree_ssb:
-+ kfree(ssb);
-+out_error:
-+ ssb_err("Initialization failed (%d, %d)\n", res, err);
-+ return err;
-+}
-+
-+static void ssb_host_pcmcia_remove(struct pcmcia_device *dev)
-+{
-+ struct ssb_bus *ssb = dev->priv;
-+
-+ ssb_bus_unregister(ssb);
-+ pcmcia_disable_device(dev);
-+ kfree(ssb);
-+ dev->priv = NULL;
-+}
-+
-+#ifdef CPTCFG_PM
-+static int ssb_host_pcmcia_suspend(struct pcmcia_device *dev)
-+{
-+ struct ssb_bus *ssb = dev->priv;
-+
-+ return ssb_bus_suspend(ssb);
-+}
-+
-+static int ssb_host_pcmcia_resume(struct pcmcia_device *dev)
-+{
-+ struct ssb_bus *ssb = dev->priv;
-+
-+ return ssb_bus_resume(ssb);
-+}
-+#else /* CPTCFG_PM */
-+# define ssb_host_pcmcia_suspend NULL
-+# define ssb_host_pcmcia_resume NULL
-+#endif /* CPTCFG_PM */
-+
-+static struct pcmcia_driver ssb_host_pcmcia_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ssb-pcmcia",
-+ .id_table = ssb_host_pcmcia_tbl,
-+ .probe = ssb_host_pcmcia_probe,
-+ .remove = ssb_host_pcmcia_remove,
-+ .suspend = ssb_host_pcmcia_suspend,
-+ .resume = ssb_host_pcmcia_resume,
-+};
-+
-+/*
-+ * These are not module init/exit functions!
-+ * The module_pcmcia_driver() helper cannot be used here.
-+ */
-+int ssb_host_pcmcia_init(void)
-+{
-+ return pcmcia_register_driver(&ssb_host_pcmcia_driver);
-+}
-+
-+void ssb_host_pcmcia_exit(void)
-+{
-+ pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
-+}
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -906,7 +906,6 @@ int ssb_bus_pcmciabus_register(struct ss
-
- return err;
- }
--EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
- #endif /* CPTCFG_SSB_PCMCIAHOST */
-
- #ifdef CPTCFG_SSB_SDIOHOST
-@@ -1474,6 +1473,12 @@ static int __init ssb_modinit(void)
- /* don't fail SSB init because of this */
- err = 0;
- }
-+ err = ssb_host_pcmcia_init();
-+ if (err) {
-+ ssb_err("PCMCIA host initialization failed\n");
-+ /* don't fail SSB init because of this */
-+ err = 0;
-+ }
- err = ssb_gige_init();
- if (err) {
- ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
-@@ -1491,6 +1496,7 @@ fs_initcall(ssb_modinit);
- static void __exit ssb_modexit(void)
- {
- ssb_gige_exit();
-+ ssb_host_pcmcia_exit();
- b43_pci_ssb_bridge_exit();
- bus_unregister(&ssb_bustype);
- }
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -94,6 +94,8 @@ extern int ssb_pcmcia_get_invariants(str
- extern int ssb_pcmcia_hardware_setup(struct ssb_bus *bus);
- extern void ssb_pcmcia_exit(struct ssb_bus *bus);
- extern int ssb_pcmcia_init(struct ssb_bus *bus);
-+extern int ssb_host_pcmcia_init(void);
-+extern void ssb_host_pcmcia_exit(void);
- extern const struct ssb_bus_ops ssb_pcmcia_ops;
- #else /* CPTCFG_SSB_PCMCIAHOST */
- static inline int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
-@@ -117,6 +119,13 @@ static inline int ssb_pcmcia_init(struct
- {
- return 0;
- }
-+static inline int ssb_host_pcmcia_init(void)
-+{
-+ return 0;
-+}
-+static inline void ssb_host_pcmcia_exit(void)
-+{
-+}
- #endif /* CPTCFG_SSB_PCMCIAHOST */
-
- /* sdio.c */
---- a/drivers/net/wireless/b43/pcmcia.c
-+++ /dev/null
-@@ -1,145 +0,0 @@
--/*
--
-- Broadcom B43 wireless driver
--
-- Copyright (c) 2007 Michael Buesch <m@bues.ch>
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2 of the License, or
-- (at your option) any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; see the file COPYING. If not, write to
-- the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
-- Boston, MA 02110-1301, USA.
--
--*/
--
--#include "pcmcia.h"
--
--#include <linux/ssb/ssb.h>
--#include <linux/slab.h>
--#include <linux/module.h>
--
--#include <pcmcia/cistpl.h>
--#include <pcmcia/ciscode.h>
--#include <pcmcia/ds.h>
--#include <pcmcia/cisreg.h>
--
--
--static const struct pcmcia_device_id b43_pcmcia_tbl[] = {
-- PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448),
-- PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476),
-- PCMCIA_DEVICE_NULL,
--};
--
--MODULE_DEVICE_TABLE(pcmcia, b43_pcmcia_tbl);
--
--#ifdef CONFIG_PM
--static int b43_pcmcia_suspend(struct pcmcia_device *dev)
--{
-- struct ssb_bus *ssb = dev->priv;
--
-- return ssb_bus_suspend(ssb);
--}
--
--static int b43_pcmcia_resume(struct pcmcia_device *dev)
--{
-- struct ssb_bus *ssb = dev->priv;
--
-- return ssb_bus_resume(ssb);
--}
--#else /* CONFIG_PM */
--# define b43_pcmcia_suspend NULL
--# define b43_pcmcia_resume NULL
--#endif /* CONFIG_PM */
--
--static int b43_pcmcia_probe(struct pcmcia_device *dev)
--{
-- struct ssb_bus *ssb;
-- int err = -ENOMEM;
-- int res = 0;
--
-- ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
-- if (!ssb)
-- goto out_error;
--
-- err = -ENODEV;
--
-- dev->config_flags |= CONF_ENABLE_IRQ;
--
-- dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 |
-- WIN_USE_WAIT;
-- dev->resource[2]->start = 0;
-- dev->resource[2]->end = SSB_CORE_SIZE;
-- res = pcmcia_request_window(dev, dev->resource[2], 250);
-- if (res != 0)
-- goto err_kfree_ssb;
--
-- res = pcmcia_map_mem_page(dev, dev->resource[2], 0);
-- if (res != 0)
-- goto err_disable;
--
-- if (!dev->irq)
-- goto err_disable;
--
-- res = pcmcia_enable_device(dev);
-- if (res != 0)
-- goto err_disable;
--
-- err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start);
-- if (err)
-- goto err_disable;
-- dev->priv = ssb;
--
-- return 0;
--
--err_disable:
-- pcmcia_disable_device(dev);
--err_kfree_ssb:
-- kfree(ssb);
--out_error:
-- printk(KERN_ERR "b43-pcmcia: Initialization failed (%d, %d)\n",
-- res, err);
-- return err;
--}
--
--static void b43_pcmcia_remove(struct pcmcia_device *dev)
--{
-- struct ssb_bus *ssb = dev->priv;
--
-- ssb_bus_unregister(ssb);
-- pcmcia_disable_device(dev);
-- kfree(ssb);
-- dev->priv = NULL;
--}
--
--static struct pcmcia_driver b43_pcmcia_driver = {
-- .owner = THIS_MODULE,
-- .name = "b43-pcmcia",
-- .id_table = b43_pcmcia_tbl,
-- .probe = b43_pcmcia_probe,
-- .remove = b43_pcmcia_remove,
-- .suspend = b43_pcmcia_suspend,
-- .resume = b43_pcmcia_resume,
--};
--
--/*
-- * These are not module init/exit functions!
-- * The module_pcmcia_driver() helper cannot be used here.
-- */
--int b43_pcmcia_init(void)
--{
-- return pcmcia_register_driver(&b43_pcmcia_driver);
--}
--
--void b43_pcmcia_exit(void)
--{
-- pcmcia_unregister_driver(&b43_pcmcia_driver);
--}
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 22 Nov 2015 14:03:40 +0100
-Subject: [PATCH] ath10k: do not use coherent memory for allocated device
- memory chunks
-
-Coherent memory is more expensive to allocate (and constrained on some
-architectures where it has to be pre-allocated). It is also completely
-unnecessary, since the host has no reason to even access these allocated
-memory spaces
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath10k/wmi.c
-+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -4258,34 +4258,58 @@ void ath10k_wmi_event_vdev_resume_req(st
- ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_RESUME_REQ_EVENTID\n");
- }
-
--static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
-- u32 num_units, u32 unit_len)
-+static int ath10k_wmi_alloc_chunk(struct ath10k *ar, u32 req_id,
-+ u32 num_units, u32 unit_len)
- {
- dma_addr_t paddr;
- u32 pool_size;
- int idx = ar->wmi.num_mem_chunks;
-+ void *vaddr = NULL;
-
-- pool_size = num_units * round_up(unit_len, 4);
-+ if (ar->wmi.num_mem_chunks == ARRAY_SIZE(ar->wmi.mem_chunks))
-+ return -ENOMEM;
-
-- if (!pool_size)
-- return -EINVAL;
-+ while (!vaddr && num_units) {
-+ pool_size = num_units * round_up(unit_len, 4);
-+ if (!pool_size)
-+ return -EINVAL;
-
-- ar->wmi.mem_chunks[idx].vaddr = dma_alloc_coherent(ar->dev,
-- pool_size,
-- &paddr,
-- GFP_KERNEL);
-- if (!ar->wmi.mem_chunks[idx].vaddr) {
-- ath10k_warn(ar, "failed to allocate memory chunk\n");
-- return -ENOMEM;
-+ vaddr = kzalloc(pool_size, GFP_KERNEL | __GFP_NOWARN);
-+ if (!vaddr)
-+ num_units /= 2;
- }
-
-- memset(ar->wmi.mem_chunks[idx].vaddr, 0, pool_size);
-+ if (!num_units)
-+ return -ENOMEM;
-
-+ paddr = dma_map_single(ar->dev, vaddr, pool_size, DMA_TO_DEVICE);
-+ if (dma_mapping_error(ar->dev, paddr)) {
-+ kfree(vaddr);
-+ return -ENOMEM;
-+ }
-+
-+ ar->wmi.mem_chunks[idx].vaddr = vaddr;
- ar->wmi.mem_chunks[idx].paddr = paddr;
- ar->wmi.mem_chunks[idx].len = pool_size;
- ar->wmi.mem_chunks[idx].req_id = req_id;
- ar->wmi.num_mem_chunks++;
-
-+ return num_units;
-+}
-+
-+static int ath10k_wmi_alloc_host_mem(struct ath10k *ar, u32 req_id,
-+ u32 num_units, u32 unit_len)
-+{
-+ int ret;
-+
-+ while (num_units) {
-+ ret = ath10k_wmi_alloc_chunk(ar, req_id, num_units, unit_len);
-+ if (ret < 0)
-+ return ret;
-+
-+ num_units -= ret;
-+ }
-+
- return 0;
- }
-
-@@ -7616,10 +7640,11 @@ void ath10k_wmi_free_host_mem(struct ath
-
- /* free the host memory chunks requested by firmware */
- for (i = 0; i < ar->wmi.num_mem_chunks; i++) {
-- dma_free_coherent(ar->dev,
-- ar->wmi.mem_chunks[i].len,
-- ar->wmi.mem_chunks[i].vaddr,
-- ar->wmi.mem_chunks[i].paddr);
-+ dma_unmap_single(ar->dev,
-+ ar->wmi.mem_chunks[i].paddr,
-+ ar->wmi.mem_chunks[i].len,
-+ DMA_TO_DEVICE);
-+ kfree(ar->wmi.mem_chunks[i].vaddr);
- }
-
- ar->wmi.num_mem_chunks = 0;
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Tue, 24 Nov 2015 11:33:54 +0100
-Subject: [PATCH] ath10k: stop abusing GFP_DMA
-
-Allocations from the DMA zone were originally added for legacy ISA
-stuff, or PCI devices that have specific limitations in their DMA
-addressing capabilities. It has no place in ath10k, which can do
-full 32-bit DMA.
-
-Fixes memory allocation errors on some platforms.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath10k/htt_rx.c
-+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
-@@ -536,7 +536,7 @@ int ath10k_htt_rx_alloc(struct ath10k_ht
-
- size = htt->rx_ring.size * sizeof(htt->rx_ring.paddrs_ring);
-
-- vaddr = dma_alloc_coherent(htt->ar->dev, size, &paddr, GFP_DMA);
-+ vaddr = dma_alloc_coherent(htt->ar->dev, size, &paddr, GFP_KERNEL);
- if (!vaddr)
- goto err_dma_ring;
-
-@@ -545,7 +545,7 @@ int ath10k_htt_rx_alloc(struct ath10k_ht
-
- vaddr = dma_alloc_coherent(htt->ar->dev,
- sizeof(*htt->rx_ring.alloc_idx.vaddr),
-- &paddr, GFP_DMA);
-+ &paddr, GFP_KERNEL);
- if (!vaddr)
- goto err_dma_idx;
-
---- a/drivers/net/wireless/ath/ath10k/htt_tx.c
-+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
-@@ -111,7 +111,7 @@ int ath10k_htt_tx_alloc(struct ath10k_ht
- size = htt->max_num_pending_tx * sizeof(struct ath10k_htt_txbuf);
- htt->txbuf.vaddr = dma_alloc_coherent(ar->dev, size,
- &htt->txbuf.paddr,
-- GFP_DMA);
-+ GFP_KERNEL);
- if (!htt->txbuf.vaddr) {
- ath10k_err(ar, "failed to alloc tx buffer\n");
- ret = -ENOMEM;
-@@ -124,7 +124,7 @@ int ath10k_htt_tx_alloc(struct ath10k_ht
- size = htt->max_num_pending_tx * sizeof(struct htt_msdu_ext_desc);
- htt->frag_desc.vaddr = dma_alloc_coherent(ar->dev, size,
- &htt->frag_desc.paddr,
-- GFP_DMA);
-+ GFP_KERNEL);
- if (!htt->frag_desc.vaddr) {
- ath10k_warn(ar, "failed to alloc fragment desc memory\n");
- ret = -ENOMEM;
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
-@@ -22,6 +22,9 @@ menuconfig ATH_CARDS
+@@ -23,6 +23,9 @@ config WLAN_VENDOR_ATH
- if ATH_CARDS
+ if WLAN_VENDOR_ATH
+config ATH_USER_REGD
+ bool "Do not enforce EEPROM regulatory restrictions"
---help---
--- a/.local-symbols
+++ b/.local-symbols
-@@ -140,6 +140,7 @@ RTL8187_LEDS=
+@@ -126,6 +126,7 @@ ADM8211=
ATH_COMMON=
- ATH_CARDS=
+ WLAN_VENDOR_ATH=
ATH_DEBUG=
+ATH_USER_REGD=
ATH_TRACEPOINTS=
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
-@@ -2480,6 +2480,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2463,6 +2463,8 @@ void regulatory_hint_country_ie(struct w
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
-@@ -2686,6 +2688,7 @@ static void restore_regulatory_settings(
+@@ -2669,6 +2671,7 @@ static void restore_regulatory_settings(
void regulatory_hint_disconnect(void)
{
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
-@@ -2361,6 +2361,7 @@ struct cfg80211_qos_map {
+@@ -2363,6 +2363,7 @@ struct cfg80211_qos_map {
* (as advertised by the nl80211 feature flag.)
* @get_tx_power: store the current TX power into the dbm variable;
* return 0 if successful
*
* @set_wds_peer: set the WDS peer for a WDS interface
*
-@@ -2617,6 +2618,7 @@ struct cfg80211_ops {
+@@ -2624,6 +2625,7 @@ struct cfg80211_ops {
enum nl80211_tx_power_setting type, int mbm);
int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
int *dbm);
const u8 *addr);
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -1250,6 +1250,7 @@ enum ieee80211_smps_mode {
+@@ -1252,6 +1252,7 @@ enum ieee80211_smps_mode {
*
* @power_level: requested transmit power (in dBm), backward compatibility
* value only that is set to the minimum of all interfaces
*
* @chandef: the channel definition to tune to
* @radar_enabled: whether radar detection is enabled
-@@ -1270,6 +1271,7 @@ enum ieee80211_smps_mode {
+@@ -1272,6 +1273,7 @@ enum ieee80211_smps_mode {
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
u8 ps_dtim_period;
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
-@@ -1783,6 +1783,9 @@ enum nl80211_commands {
+@@ -1790,6 +1790,9 @@ enum nl80211_commands {
* between scans. The scan plans are executed sequentially.
* Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -2157,6 +2160,8 @@ enum nl80211_attrs {
+@@ -2164,6 +2167,8 @@ enum nl80211_attrs {
NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
NL80211_ATTR_SCHED_SCAN_PLANS,
__NL80211_ATTR_AFTER_LAST,
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
-@@ -2206,6 +2206,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2201,6 +2201,19 @@ static int ieee80211_get_tx_power(struct
return 0;
}
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
const u8 *addr)
{
-@@ -3849,6 +3862,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3375,6 +3388,7 @@ const struct cfg80211_ops mac80211_confi
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
-@@ -1321,6 +1321,7 @@ struct ieee80211_local {
+@@ -1317,6 +1317,7 @@ struct ieee80211_local {
int dynamic_ps_forced_timeout;
int user_power_level; /* in dBm, for all interfaces */
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
-@@ -579,6 +585,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -580,6 +586,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
IEEE80211_RADIOTAP_MCS_HAVE_BW;
local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
---
Changes since v1: ---
---
- drivers/net/wireless/rt2x00/rt2800.h | 13 -------------
- drivers/net/wireless/rt2x00/rt2800lib.h | 11 +++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 13 -------------
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 11 +++++++++++
2 files changed, 11 insertions(+), 13 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -20,6 +20,20 @@
#ifndef RT2800LIB_H
#define RT2800LIB_H
struct rt2800_ops {
void (*register_read)(struct rt2x00_dev *rt2x00dev,
const unsigned int offset, u32 *value);
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2969,18 +2969,4 @@ enum rt2800_eeprom_word {
#define WCID_END 222
#define STA_IDS_SIZE (WCID_END - WCID_START + 2)
Changes since v1:
- don't enable the new flag for RT3071 and RT5592
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++++
- drivers/net/wireless/rt2x00/rt2800lib.h | 13 +++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 ++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 13 +++++++++++++
2 files changed, 17 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7721,6 +7721,7 @@ static int rt2800_probe_rt(struct rt2x00
int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Allocate eeprom data.
*/
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -22,6 +22,10 @@
#include "rt2800.h"
---
Changes since v1: ---
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 55 +++++++++++++++++++++++++++++-
- drivers/net/wireless/rt2x00/rt2800lib.h | 32 +++++++++++++++++
- drivers/net/wireless/rt2x00/rt2800mmio.c | 26 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800mmio.h | 4 +++
- drivers/net/wireless/rt2x00/rt2800pci.c | 14 ++++++++
- drivers/net/wireless/rt2x00/rt2800soc.c | 3 ++
- drivers/net/wireless/rt2x00/rt2800usb.c | 31 +++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 55 +++++++++++++++++++++++++++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 32 +++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 26 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.h | 4 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 14 ++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 3 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 31 +++++++++++++++++
7 files changed, 164 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -451,11 +451,13 @@ void rt2800_mcu_request(struct rt2x00_de
rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token);
rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0);
memcpy(&seq->tkip.iv16, &iveiv_entry.iv[0], 2);
memcpy(&seq->tkip.iv32, &iveiv_entry.iv[4], 4);
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -38,6 +38,11 @@ struct rt2800_drv_data {
DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
u32 *value)
---- a/drivers/net/wireless/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -820,8 +820,10 @@ int rt2800mmio_init_registers(struct rt2
rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1);
rt2x00mmio_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("rt2800 MMIO library");
---- a/drivers/net/wireless/rt2x00/rt2800mmio.h
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
@@ -160,4 +160,8 @@ int rt2800mmio_init_registers(struct rt2
/* Device state switch handlers. */
int rt2800mmio_enable_radio(struct rt2x00_dev *rt2x00dev);
+void rt2800mmio_shmem_unlock(struct rt2x00_dev *rt2x00dev);
+
#endif /* RT2800MMIO_H */
---- a/drivers/net/wireless/rt2x00/rt2800pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -69,7 +69,9 @@ static void rt2800pci_mcu_status(struct
return;
};
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -176,6 +176,9 @@ static const struct rt2800_ops rt2800soc
.drv_write_firmware = rt2800soc_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
};
static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
---- a/drivers/net/wireless/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -51,6 +51,27 @@ static bool rt2800usb_hwcrypt_disabled(s
return modparam_nohwcrypt;
}
---
Changes since v1: ---
---
- drivers/net/wireless/rt2x00/rt2800.h | 3 +++
- drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 3 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
2 files changed, 47 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -574,6 +574,7 @@
#define PBF_SYS_CTRL 0x0400
#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
#define BEACON_BASE_TO_OFFSET(_base) (((_base) - 0x4000) / 64)
/*
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -82,6 +82,39 @@ static inline bool rt2800_is_305x_soc(st
return false;
}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++-
- drivers/net/wireless/rt2x00/rt2800lib.h | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4614,6 +4614,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner);
*/
static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
/*
* Allocate eeprom data.
*/
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -35,6 +35,7 @@ struct rt2800_drv_data {
u8 txmixer_gain_24g;
u8 txmixer_gain_5g;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800lib.c | 24 ++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 24 ++++++++++++++++++++++++
2 files changed, 38 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -629,6 +629,20 @@
*/
#define PBF_DBG 0x043c
/*
* RF registers
*/
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4626,6 +4626,30 @@ static int rt2800_init_registers(struct
if (ret)
return ret;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7851,7 +7851,10 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (rt2x00_rt(rt2x00dev, RT3593))
__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/Kconfig | 2 +-
+ drivers/net/wireless/ralink/rt2x00/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -210,7 +210,7 @@ endif
config RT2800SOC
tristate "Ralink WiSoC support"
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
1 file changed, 1 insertion(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7821,6 +7821,7 @@ static int rt2800_probe_rt(struct rt2x00
case RT3390:
case RT3572:
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800.h | 4 +-
- drivers/net/wireless/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 4 +-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -48,7 +48,8 @@
* RF2853 2.4G/5G 3T3R
* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
#define RF5360 0x5360
#define RF5362 0x5362
#define RF5370 0x5370
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7441,6 +7441,66 @@ static const struct rf_channel rf_vals_3
{173, 0x61, 0, 9},
};
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
1 file changed, 2 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4378,6 +4378,7 @@ void rt2800_vco_calibration(struct rt2x0
case RF3053:
case RF3070:
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++
1 file changed, 208 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -2625,6 +2625,211 @@ static void rt2800_config_channel_rf3053
}
}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
1 file changed, 1 insertion(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7406,6 +7406,7 @@ static int rt2800_init_eeprom(struct rt2
case RF3290:
case RF3320:
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800.h | 14 ++++++++++++++
- drivers/net/wireless/rt2x00/rt2800lib.c | 19 ++++++++++++++++---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 19 ++++++++++++++++---
2 files changed, 30 insertions(+), 3 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -1588,6 +1588,20 @@
#define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00)
* RX_FILTER_CFG: RX configuration register.
*/
#define RX_FILTER_CFG 0x1400
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4981,6 +4981,12 @@ static int rt2800_init_registers(struct
rt2800_register_write(rt2x00dev, TX_SW_CFG2,
0x00000000);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800soc.c | 9 ++++++++-
+ drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -5784,6 +5784,47 @@ static void rt2800_init_bbp_3593(struct
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800.h | 1 +
- drivers/net/wireless/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++
2 files changed, 142 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2171,6 +2171,7 @@ struct mac_iveiv_entry {
/*
* RFCSR 2:
#define RFCSR2_RESCAL_EN FIELD8(0x80)
/*
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -6819,6 +6819,144 @@ static void rt2800_init_rfcsr_3593(struc
/* TODO: enable stream mode support */
}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -342,7 +342,8 @@ static unsigned int rt2800_eeprom_word_i
wiphy_name(rt2x00dev->hw->wiphy), word))
return 0;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
1 file changed, 2 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7587,6 +7587,8 @@ static int rt2800_init_eeprom(struct rt2
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++--
1 file changed, 69 insertions(+), 3 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3405,6 +3405,36 @@ static char rt2800_txpower_to_dev(struct
return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3392,13 +3392,15 @@ static char rt2800_txpower_to_dev(struct
unsigned int channel,
char txpower)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4611,7 +4611,8 @@ static void rt2800_config_txpower(struct
struct ieee80211_channel *chan,
int power_level)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7469,7 +7469,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
{
u16 word;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
1 file changed, 1 insertion(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -558,6 +558,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
{
switch (rt2x00dev->chip.rt) {
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -983,7 +983,8 @@ EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
unsigned int index)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8402,7 +8402,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (rt2x00_rt(rt2x00dev, RT3593))
__set_bit(RT2800_HAS_HIGH_SHARED_MEM, &drv_data->rt2800_flags);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1937,7 +1937,8 @@ void rt2800_config_ant(struct rt2x00_dev
rt2800_bbp_write(rt2x00dev, 3, r3);
rt2800_bbp_write(rt2x00dev, 1, r1);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1960,7 +1960,8 @@ static void rt2800_config_lna_gain(struc
rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 11 +++++++++--
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4811,7 +4811,8 @@ static u8 rt2800_get_default_vgc(struct
else
vgc = 0x2e + rt2x00dev->lna_gain;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 9 ++++++---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7606,7 +7606,8 @@ static int rt2800_validate_eeprom(struct
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 +++
1 file changed, 3 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3981,6 +3981,9 @@ static u8 rt2800_compensate_txpower(stru
if (rt2x00_rt(rt2x00dev, RT3593))
return min_t(u8, txpower, 0xc);
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8415,7 +8415,8 @@ int rt2800_probe_hw(struct rt2x00_dev *r
if (retval)
return retval;
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -97,7 +97,8 @@ static inline void rt2800_shared_mem_sel
static inline bool rt2800_beacon_uses_high_mem(struct rt2x00_dev *rt2x00dev)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800mmio.c | 72 +++++++++++++++++++++++++-----
- drivers/net/wireless/rt2x00/rt2x00.h | 5 +++
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 72 +++++++++++++++++++++++++-----
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h | 5 +++
2 files changed, 65 insertions(+), 12 deletions(-)
---- a/drivers/net/wireless/rt2x00/rt2800mmio.c
-+++ b/drivers/net/wireless/rt2x00/rt2800mmio.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne
}
EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet);
/*
* Never disable the TX_FIFO_STATUS interrupt.
*/
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -989,6 +989,11 @@ struct rt2x00_dev {
int rf_channel;
---- a/drivers/net/wireless/rt2x00/rt2x00pci.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.c
@@ -94,8 +94,10 @@ int rt2x00pci_probe(struct pci_dev *pci_
pci_set_master(pci_dev);
+};
+
+#endif /* _RT2X00_PLATFORM_H */
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -38,6 +38,7 @@
#include <linux/kfifo.h>
#include <linux/hrtimer.h>
--- a/.local-symbols
+++ b/.local-symbols
-@@ -314,6 +314,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -329,6 +329,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=
+RT2X00_LIB_EEPROM=
RT2X00_DEBUG=
- WL_MEDIATEK=
- MT7601U=
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+ WLAN_VENDOR_REALTEK=
+ RTL8180=
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -69,6 +69,7 @@ config RT2800PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
config RT2X00_LIB_LEDS
bool
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
---- a/drivers/net/wireless/rt2x00/Makefile
-+++ b/drivers/net/wireless/rt2x00/Makefile
+--- a/drivers/net/wireless/ralink/rt2x00/Makefile
++++ b/drivers/net/wireless/ralink/rt2x00/Makefile
@@ -7,6 +7,7 @@ rt2x00lib-$(CPTCFG_RT2X00_LIB_DEBUGFS) +
rt2x00lib-$(CPTCFG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
rt2x00lib-$(CPTCFG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
obj-$(CPTCFG_RT2X00_LIB) += rt2x00lib.o
obj-$(CPTCFG_RT2X00_LIB_MMIO) += rt2x00mmio.o
---- a/drivers/net/wireless/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -46,6 +46,8 @@ struct rt2800_drv_data {
} shmem_lock;
};
return rt2800ops->read_eeprom(rt2x00dev);
}
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -102,19 +102,6 @@ static int rt2800soc_set_device_state(st
return retval;
}
.hwcrypt_disabled = rt2800soc_hwcrypt_disabled,
.drv_write_firmware = rt2800soc_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -697,6 +697,7 @@ enum rt2x00_capability_flags {
REQUIRE_HT_TX_DESC,
REQUIRE_PS_AUTOWAKE,
* FIFO for storing tx status reports between isr and tasklet.
*/
DECLARE_KFIFO_PTR(txstatus_fifo, u32);
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1334,6 +1334,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
--- /dev/null
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
@@ -0,0 +1,111 @@
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ release_firmware(rt2x00dev->eeprom_file);
+ rt2x00dev->eeprom_file = NULL;
+}
---- a/drivers/net/wireless/rt2x00/rt2x00lib.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00lib.h
@@ -320,6 +320,22 @@ static inline void rt2x00lib_free_firmwa
#endif /* CPTCFG_RT2X00_LIB_FIRMWARE */
* Debugfs handlers.
*/
#ifdef CPTCFG_RT2X00_LIB_DEBUGFS
---- a/drivers/net/wireless/rt2x00/rt2x00soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00soc.c
@@ -92,6 +92,7 @@ int rt2x00soc_probe(struct platform_devi
rt2x00dev->hw = hw;
rt2x00dev->irq = platform_get_irq(pdev, 0);
---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
@@ -26,6 +26,7 @@
#include <linux/kernel.h>
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- drivers/net/wireless/rt2x00/Kconfig | 1 +
- drivers/net/wireless/rt2x00/rt2800pci.c | 44 ++++++++++++++++++++++++++-----
+ drivers/net/wireless/ralink/rt2x00/Kconfig | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 44 ++++++++++++++++++++++++++-----
2 files changed, 39 insertions(+), 6 deletions(-)
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -219,6 +219,7 @@ config RT2800SOC
select RT2X00_LIB_EEPROM
select RT2800_LIB
---help---
This adds support for Ralink WiSoC devices.
Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
---- a/drivers/net/wireless/rt2x00/rt2x00eeprom.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00eeprom.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c
@@ -26,11 +26,66 @@
#include <linux/kernel.h>
+ if (!ret) {
+ rt2x00dev->eeprom_file = &mtd_fw;
+ mtd_fw.size = len;
-+ mtd_fw.data = rt2x00dev->eeprom;
++ mtd_fw.data = (const u8 *) rt2x00dev->eeprom;
+ }
+#endif
+
};
#endif /* _RT2X00_PLATFORM_H */
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -940,6 +940,22 @@ static int rt2x00lib_probe_hw_modes(stru
unsigned int num_rates;
unsigned int i;
num_rates = 0;
if (spec->supported_rates & SUPPORT_RATE_CCK)
num_rates += 4;
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -405,6 +405,7 @@ struct hw_mode_spec {
unsigned int supported_bands;
#define SUPPORT_BAND_2GHZ 0x00000001
int disable_2ghz;
int disable_5ghz;
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -931,6 +931,18 @@ static void rt2x00lib_rate(struct ieee80
entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
}
static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
struct hw_mode_spec *spec)
{
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -1412,6 +1412,7 @@ static inline void rt2x00debug_dump_fram
*/
u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
/*
* Interrupt context handlers.
---- a/drivers/net/wireless/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/rt2x00/rt61pci.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -2390,6 +2390,7 @@ static int rt61pci_validate_eeprom(struc
u32 reg;
u16 word;
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/slab.h>
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3528,11 +3528,18 @@ static void rt2800_config_channel(struct
/*
* Change BBP settings
return 0;
}
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2335,6 +2335,12 @@ struct mac_iveiv_entry {
#define RFCSR36_RF_BS FIELD8(0x80)
/*
* EEPROM frequency
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -717,6 +717,8 @@ enum rt2x00_capability_flags {
CAPABILITY_DOUBLE_ANTENNA,
CAPABILITY_BT_COEXIST,
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8185,6 +8185,27 @@ static const struct rf_channel rf_vals_5
{196, 83, 0, 12, 1},
};
* Initialize hw specifications.
*/
retval = rt2800_probe_hw_mode(rt2x00dev);
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -400,6 +400,7 @@ static inline struct rt2x00_intf* vif_to
* @channels: Device/chipset specific channel values (See &struct rf_channel).
* @channels_info: Additional information for channels (See &struct channel_info).
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- drivers/net/wireless/rt2x00/rt2800pci.c | 7 +++++++
+ drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 7 +++++++
1 file changed, 7 insertions(+)
---- a/drivers/net/wireless/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/rt2x00/rt2800soc.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -237,10 +237,17 @@ static int rt2800soc_probe(struct platfo
return rt2x00soc_probe(pdev, &rt2800soc_ops);
}
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -36,6 +36,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -74,6 +74,7 @@
#define RF3070 0x3070
#define RF3290 0x3290
#define RF5360 0x5360
#define RF5362 0x5362
#define RF5370 0x5370
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3014,6 +3014,13 @@ static void rt2800_config_channel_rf53xx
rt2800_rfcsr_write(rt2x00dev, 59,
case RT5390:
case RT5392:
case RT5592:
---- a/drivers/net/wireless/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/rt2x00/rt2x00.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -169,6 +169,7 @@ struct rt2x00_chip {
#define RT3572 0x3572
#define RT3593 0x3593
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -37,6 +37,7 @@
#include <linux/module.h>
#include <linux/slab.h>
rt2x00dev->led_mcu_reg = eeprom;
#endif /* CPTCFG_RT2X00_LIB_LEDS */
---- a/drivers/net/wireless/rt2x00/rt2x00leds.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00leds.c
@@ -109,6 +109,9 @@ static int rt2x00leds_register_led(struc
led->led_dev.name = name;
led->led_dev.brightness = LED_OFF;
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1283,7 +1283,7 @@ static inline void rt2x00lib_set_if_comb
*/
if_limit = &rt2x00dev->if_limits_ap;
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7817,10 +7817,11 @@ static int rt2800_init_eeprom(struct rt2
* RT53xx: defined in "EEPROM_CHIP_ID" field
*/
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2321,6 +2321,8 @@ struct mac_iveiv_entry {
#define RFCSR30_RX_H20M FIELD8(0x04)
#define RFCSR30_RX_VCM FIELD8(0x18)
/*
* RFCSR 31:
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3527,8 +3527,13 @@ static void rt2800_config_channel(struct
rt2x00_rf(rt2x00dev, RF5390) ||
rt2x00_rf(rt2x00dev, RF5392)) {
---- a/drivers/net/wireless/rt2x00/rt2x00mac.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
-@@ -632,12 +632,8 @@
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c
+@@ -632,12 +632,8 @@ void rt2x00mac_bss_info_changed(struct i
} else if (bss_conf->enable_beacon && !intf->enable_beacon) {
rt2x00dev->intf_beaconing++;
intf->enable_beacon = true;
if (rt2x00dev->intf_beaconing == 1) {
/*
---- a/drivers/net/wireless/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -144,7 +144,8 @@
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -144,7 +144,8 @@ static void rt2x00lib_intf_scheduled_ite
if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) {
mutex_lock(&intf->beacon_skb_mutex);
mutex_unlock(&intf->beacon_skb_mutex);
}
}
-@@ -207,6 +208,7 @@
+@@ -207,6 +208,7 @@ static void rt2x00lib_beaconupdate_iter(
struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = data;
if (vif->type != NL80211_IFTYPE_AP &&
vif->type != NL80211_IFTYPE_ADHOC &&
-@@ -220,7 +222,8 @@
+@@ -220,7 +222,8 @@ static void rt2x00lib_beaconupdate_iter(
* never be called for USB devices.
*/
WARN_ON(rt2x00_is_usb(rt2x00dev));
---- a/drivers/net/wireless/mwl8k.c
-+++ b/drivers/net/wireless/mwl8k.c
+--- a/drivers/net/wireless/marvell/mwl8k.c
++++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -5679,6 +5679,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
---- a/drivers/net/wireless/libertas/cfg.c
-+++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2083,6 +2083,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
+--- a/drivers/net/wireless/marvell/libertas/cfg.c
++++ b/drivers/net/wireless/marvell/libertas/cfg.c
+@@ -2084,6 +2084,8 @@ struct wireless_dev *lbs_cfg_alloc(struc
goto err_wiphy_new;
}
lbs_deb_leave(LBS_DEB_CFG80211);
return wdev;
---- a/drivers/net/wireless/libertas/main.c
-+++ b/drivers/net/wireless/libertas/main.c
+--- a/drivers/net/wireless/marvell/libertas/main.c
++++ b/drivers/net/wireless/marvell/libertas/main.c
@@ -987,6 +987,7 @@ struct lbs_private *lbs_add_card(void *c
goto err_adapter;
}
---- a/drivers/net/wireless/libertas/cfg.c
-+++ b/drivers/net/wireless/libertas/cfg.c
-@@ -2173,6 +2173,8 @@ int lbs_cfg_register(struct lbs_private
+--- a/drivers/net/wireless/marvell/libertas/cfg.c
++++ b/drivers/net/wireless/marvell/libertas/cfg.c
+@@ -2174,6 +2174,8 @@ int lbs_cfg_register(struct lbs_private
wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
wdev->wiphy->reg_notifier = lbs_reg_notifier;
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
+--- a/drivers/net/wireless/broadcom/b43/b43.h
++++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -839,6 +839,7 @@ struct b43_wldev {
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
/* PHY/Radio device. */
struct b43_phy phy;
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw");
MODULE_FIRMWARE("b43/ucode5.fw");
MODULE_FIRMWARE("b43/ucode9.fw");
---- a/drivers/net/wireless/b43/Makefile
-+++ b/drivers/net/wireless/b43/Makefile
+--- a/drivers/net/wireless/broadcom/b43/Makefile
++++ b/drivers/net/wireless/broadcom/b43/Makefile
@@ -17,7 +17,7 @@ b43-$(CPTCFG_B43_PHY_AC) += phy_ac.o
b43-y += sysfs.o
b43-y += xmit.o
b43-y += rfkill.o
b43-y += ppr.o
b43-$(CPTCFG_B43_LEDS) += leds.o
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
b43_controller_restart(dev, "DMA error");
return;
}
---- a/drivers/net/wireless/b43/pio.h
-+++ b/drivers/net/wireless/b43/pio.h
+--- a/drivers/net/wireless/broadcom/b43/pio.h
++++ b/drivers/net/wireless/broadcom/b43/pio.h
@@ -150,7 +150,7 @@ static inline void b43_piorx_write32(str
b43_write32(q->dev, q->mmio_base + offset, value);
}
+#endif /* CPTCFG_B43_PIO */
#endif /* B43_PIO_H_ */
---- a/drivers/net/wireless/b43/Kconfig
-+++ b/drivers/net/wireless/b43/Kconfig
+--- a/drivers/net/wireless/broadcom/b43/Kconfig
++++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -98,7 +98,7 @@ config B43_BCMA_PIO
default y
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st
len, ram_offset, shm_size_offset, rate);
wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
+--- a/drivers/net/wireless/broadcom/b43/b43.h
++++ b/drivers/net/wireless/broadcom/b43/b43.h
@@ -840,6 +840,8 @@ struct b43_wldev {
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
bool use_pio; /* TRUE if next init should use PIO */
---- a/drivers/net/wireless/b43/dma.h
-+++ b/drivers/net/wireless/b43/dma.h
+--- a/drivers/net/wireless/broadcom/b43/dma.h
++++ b/drivers/net/wireless/broadcom/b43/dma.h
@@ -169,7 +169,7 @@ struct b43_dmadesc_generic {
/* DMA engine tuning knobs */
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde
} else if (dev->dev->chip_id == 0x5354) {
/* Don't allow overtaking buttons GPIOs */
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
+--- a/drivers/net/wireless/broadcom/b43/main.c
++++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0;
module_param_named(pio, b43_modparam_pio, int, 0644);
MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
---- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
@@ -58,19 +58,12 @@
(((c) < 149) ? 3 : 4))))
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
---- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
-@@ -1236,6 +1236,7 @@ static int __init brcmfmac_module_init(v
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1226,6 +1226,7 @@ static int __init brcmfmac_module_init(v
#endif
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
return 0;
}
---- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -420,6 +420,7 @@ struct brcmf_fw {
u16 bus_nr;
void (*done)(struct device *dev, const struct firmware *fw,
};
static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
-@@ -455,6 +456,8 @@ static void brcmf_fw_request_nvram_done(
+@@ -454,6 +455,8 @@ static void brcmf_fw_request_nvram_done(
goto fail;
fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
kfree(fwctx);
return;
-@@ -462,6 +465,8 @@ fail:
+@@ -461,6 +464,8 @@ fail:
brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
release_firmware(fwctx->code);
device_release_driver(fwctx->dev);
kfree(fwctx);
}
-@@ -477,6 +482,8 @@ static void brcmf_fw_request_code_done(c
+@@ -476,6 +481,8 @@ static void brcmf_fw_request_code_done(c
/* only requested code so done here */
if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
fwctx->done(fwctx->dev, fw, NULL, 0);
kfree(fwctx);
return;
}
-@@ -494,6 +501,8 @@ static void brcmf_fw_request_code_done(c
+@@ -493,6 +500,8 @@ static void brcmf_fw_request_code_done(c
fail:
brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
device_release_driver(fwctx->dev);
kfree(fwctx);
}
-@@ -505,6 +514,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -504,6 +513,8 @@ int brcmf_fw_get_firmwares_pcie(struct d
u16 domain_nr, u16 bus_nr)
{
struct brcmf_fw *fwctx;
brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
if (!fw_cb || !code)
-@@ -525,9 +536,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
+@@ -524,9 +535,17 @@ int brcmf_fw_get_firmwares_pcie(struct d
fwctx->domain_nr = domain_nr;
fwctx->bus_nr = bus_nr;
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
---- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -609,9 +609,37 @@ static struct wireless_dev *brcmf_cfg802
u32 *flags,
struct vif_params *params)
---- a/drivers/net/wireless/rt2x00/Kconfig
-+++ b/drivers/net/wireless/rt2x00/Kconfig
+--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
++++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -211,7 +211,7 @@ endif
config RT2800SOC
tristate "Ralink WiSoC support"
---- a/drivers/net/wireless/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/rt2x00/rt2800.h
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -81,6 +81,7 @@
#define RF5372 0x5372
#define RF5390 0x5390
/* TX_PWR_CFG_7 */
#define TX_PWR_CFG_7 0x13d4
#define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -61,6 +61,8 @@
rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
#define WAIT_FOR_RFCSR(__dev, __reg) \
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -1844,6 +1844,16 @@ int ath10k_core_register(struct ath10k *
+@@ -1914,6 +1914,16 @@ int ath10k_core_register(struct ath10k *
ar->chip_id = chip_id;
queue_work(ar->workqueue, &ar->register_work);
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -7092,6 +7092,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
+@@ -7138,6 +7138,21 @@ struct ath10k_vif *ath10k_get_arvif(stru
return arvif_iter.arvif;
}
int ath10k_mac_register(struct ath10k *ar)
{
static const u32 cipher_suites[] = {
-@@ -7317,6 +7332,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -7354,6 +7369,12 @@ int ath10k_mac_register(struct ath10k *a
ar->hw->wiphy->cipher_suites = cipher_suites;
ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
---- a/drivers/net/wireless/mwl8k.c
-+++ b/drivers/net/wireless/mwl8k.c
+--- a/drivers/net/wireless/marvell/mwl8k.c
++++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -6262,6 +6262,8 @@ static int mwl8k_probe(struct pci_dev *p
priv->running_bsses = 0;
projects / openwrt / staging / rmilecki.git / commitdiff