include $(TOPDIR)/rules.mk
PKG_NAME:=u-boot
-PKG_VERSION:=2014.10
+PKG_VERSION:=2016.09.01
PKG_RELEASE:=1
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_SOURCE_URL:=\
http://mirror2.openwrt.org/sources \
ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=3ddcaee2f05b7c464778112ec83664b5
+PKG_MD5SUM:=61c628f8034477c946e173ed174efeb4
PKG_TARGETS:=bin
PKG_LICENSE:=GPL-2.0 GPL-2.0+
+++ /dev/null
-From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Mon, 11 Nov 2013 06:45:44 +0100
-Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files
-
-When diffing through the changes only the relevant changes
-should be displayed.
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
----
- board/iomega/iconnect/kwbimage.cfg | 4 ++--
- board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++-----------
- 2 files changed, 13 insertions(+), 13 deletions(-)
-
---- a/board/iomega/iconnect/kwbimage.cfg
-+++ b/board/iomega/iconnect/kwbimage.cfg
-@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800
- # Configure RGMII-0 interface pad voltage to 1.8V
- DATA 0xffd100e0 0x1b1b1b9b
-
--#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
- DATA 0xffd01400 0x43000c30 # DDR Configuration register
- # bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
- # bit23-14: 0x0,
-@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
- # bit6-4: 0x4, CL=5
- # bit7: 0x0, TestMode=0 normal
- # bit8: 0x0, DLL reset=0 normal
--# bit11-9: 0x6, auto-precharge write recovery ????????????
-+# bit11-9: 0x6, auto-precharge write recovery
- # bit12: 0x0, PD must be zero
- # bit31-13: 0x0, required
-
---- a/board/raidsonic/ib62x0/kwbimage.cfg
-+++ b/board/raidsonic/ib62x0/kwbimage.cfg
-@@ -11,7 +11,7 @@
- #
-
- # Boot Media configurations
--BOOT_FROM nand # change from nand to uart if building UART image
-+BOOT_FROM nand
- NAND_ECC_MODE default
- NAND_PAGE_SIZE 0x0800
-
-@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800
- # Configure RGMII-0 interface pad voltage to 1.8V
- DATA 0xffd100e0 0x1b1b1b9b
-
--#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
- DATA 0xffd01400 0x43000c30 # DDR Configuration register
- # bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
- # bit23-14: 0x0,
--# bit24: 0x1, enable exit self refresh mode on DDR access
--# bit25: 0x1, required
-+# bit24: 0x1, enable exit self refresh mode on DDR access
-+# bit25: 0x1, required
- # bit29-26: 0x0,
- # bit31-30: 0x1,
-
-@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address
- # bit3-2: 11, Cs0size (1Gb)
- # bit5-4: 00, Cs1width (x8)
- # bit7-6: 11, Cs1size (1Gb)
--# bit9-8: 00, Cs2width (nonexistent
--# bit11-10: 00, Cs2size (nonexistent
--# bit13-12: 00, Cs3width (nonexistent
--# bit15-14: 00, Cs3size (nonexistent
-+# bit9-8: 00, Cs2width (nonexistent)
-+# bit11-10: 00, Cs2size (nonexistent)
-+# bit13-12: 00, Cs3width (nonexistent)
-+# bit15-14: 00, Cs3size (nonexistent)
- # bit16: 0, Cs0AddrSel
- # bit17: 0, Cs1AddrSel
- # bit18: 0, Cs2AddrSel
-@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
- # bit6-4: 0x4, CL=5
- # bit7: 0x0, TestMode=0 normal
- # bit8: 0x0, DLL reset=0 normal
--# bit11-9: 0x6, auto-precharge write recovery ????????????
-+# bit11-9: 0x6, auto-precharge write recovery
- # bit12: 0x0, PD must be zero
- # bit31-13: 0x0, required
-
-@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Con
- DATA 0xffd01480 0x00000001 # DDR Initialization Control
- # bit0: 0x1, enable DDR init upon this register write
-
--DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
--DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
-+DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
-+DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
-
- # End of Header extension
- DATA 0x0 0x0
--- /dev/null
+From 280b03ba28b4287de677d4c4b097918364395b5e Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Wed, 2 Jul 2014 01:47:23 +0200
+Subject: [PATCH 4/9] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+This is patch was sent already in July:
+
+http://lists.denx.de/pipermail/u-boot/2014-July/182900.html
+---
+ include/configs/ib62x0.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/ib62x0.h
++++ b/include/configs/ib62x0.h
+@@ -9,6 +9,8 @@
+ #ifndef _CONFIG_IB62x0_H
+ #define _CONFIG_IB62x0_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Version number information
+ */
+++ /dev/null
-From 292d4cf9257921912e8ea352687c977208e7553d Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Mon, 11 Nov 2013 07:27:53 +0100
-Subject: [PATCH 2/9] kirkwood: define empty CONFIG_MVGBE_PORTS by default
-
-Each board with defines it's own set of values. If we do not define
-CONFIG_MVGBE_PORTS we will hit following error:
-
-mvgbe.c: In function 'mvgbe_initialize':
-mvgbe.c:700:34: error: 'CONFIG_MVGBE_PORTS' undeclared (first use in this function)
- u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;
-
-This patch fixes above described problem.
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
----
- drivers/net/mvgbe.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/mvgbe.c
-+++ b/drivers/net/mvgbe.c
-@@ -35,6 +35,10 @@
-
- DECLARE_GLOBAL_DATA_PTR;
-
-+#ifndef CONFIG_MVGBE_PORTS
-+# define CONFIG_MVGBE_PORTS {0, 0}
-+#endif
-+
- #define MV_PHY_ADR_REQUEST 0xee
- #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
-
--- /dev/null
+From 5f9e6f640098e6963ff9b470cd5d2ab9f6a3579e Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 30 Nov 2014 02:40:37 +0100
+Subject: [PATCH 5/9] kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+ include/configs/dockstar.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/dockstar.h
++++ b/include/configs/dockstar.h
+@@ -12,6 +12,8 @@
+ #ifndef _CONFIG_DOCKSTAR_H
+ #define _CONFIG_DOCKSTAR_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Version number information
+ */
+++ /dev/null
-From fa0ece2cc571ba1ccb9d1e0a8d337417c032576e Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Mon, 23 Dec 2013 01:23:07 +0100
-Subject: [PATCH 3/9] ARM: kirkwood: fix cpu info for 6282 device id
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
----
- arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
-+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
-@@ -253,7 +253,7 @@ static void kw_sysrst_check(void)
- #if defined(CONFIG_DISPLAY_CPUINFO)
- int print_cpuinfo(void)
- {
-- char *rev;
-+ char *rev = "??";
- u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
- u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
-
-@@ -264,7 +264,13 @@ int print_cpuinfo(void)
-
- switch (revid) {
- case 0:
-- rev = "Z0";
-+ if (devid == 0x6281)
-+ rev = "Z0";
-+ else if (devid == 0x6282)
-+ rev = "A0";
-+ break;
-+ case 1:
-+ rev = "A1";
- break;
- case 2:
- rev = "A0";
-@@ -273,7 +279,6 @@ int print_cpuinfo(void)
- rev = "A1";
- break;
- default:
-- rev = "??";
- break;
- }
-
--- /dev/null
+From 0d0a6606396f0cc1a4f2966d167ef9e85d533650 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 30 Nov 2014 02:40:51 +0100
+Subject: [PATCH 6/9] kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+ include/configs/goflexhome.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/goflexhome.h
++++ b/include/configs/goflexhome.h
+@@ -15,6 +15,8 @@
+ #ifndef _CONFIG_GOFLEXHOME_H
+ #define _CONFIG_GOFLEXHOME_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Version number information
+ */
+++ /dev/null
-From 280b03ba28b4287de677d4c4b097918364395b5e Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Wed, 2 Jul 2014 01:47:23 +0200
-Subject: [PATCH 4/9] kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
-This is patch was sent already in July:
-
-http://lists.denx.de/pipermail/u-boot/2014-July/182900.html
----
- include/configs/ib62x0.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/ib62x0.h
-+++ b/include/configs/ib62x0.h
-@@ -9,6 +9,8 @@
- #ifndef _CONFIG_IB62x0_H
- #define _CONFIG_IB62x0_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Version number information
- */
--- /dev/null
+From 45ba20427135e526cfa528773de0cfe215f4dc40 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 30 Nov 2014 02:41:04 +0100
+Subject: [PATCH 7/9] kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+ include/configs/iconnect.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/iconnect.h
++++ b/include/configs/iconnect.h
+@@ -9,6 +9,8 @@
+ #ifndef _CONFIG_ICONNECT_H
+ #define _CONFIG_ICONNECT_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Version number information
+ */
+++ /dev/null
-From 5f9e6f640098e6963ff9b470cd5d2ab9f6a3579e Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Sun, 30 Nov 2014 02:40:37 +0100
-Subject: [PATCH 5/9] kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
- include/configs/dockstar.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/dockstar.h
-+++ b/include/configs/dockstar.h
-@@ -12,6 +12,8 @@
- #ifndef _CONFIG_DOCKSTAR_H
- #define _CONFIG_DOCKSTAR_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Version number information
- */
--- /dev/null
+From bd862f4e7a559e38763a5280e35bf7ff14b535f1 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 30 Nov 2014 02:41:19 +0100
+Subject: [PATCH 8/9] kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+ include/configs/pogo_e02.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/pogo_e02.h
++++ b/include/configs/pogo_e02.h
+@@ -13,6 +13,8 @@
+ #ifndef _CONFIG_POGO_E02_H
+ #define _CONFIG_POGO_E02_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Machine type definition and ID
+ */
+++ /dev/null
-From 0d0a6606396f0cc1a4f2966d167ef9e85d533650 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Sun, 30 Nov 2014 02:40:51 +0100
-Subject: [PATCH 6/9] kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
- include/configs/goflexhome.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/goflexhome.h
-+++ b/include/configs/goflexhome.h
-@@ -15,6 +15,8 @@
- #ifndef _CONFIG_GOFLEXHOME_H
- #define _CONFIG_GOFLEXHOME_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Version number information
- */
--- /dev/null
+From 787e23179708ddad7ecd9dcd6c841546689864b0 Mon Sep 17 00:00:00 2001
+From: Luka Perkov <luka@openwrt.org>
+Date: Sun, 30 Nov 2014 02:41:49 +0100
+Subject: [PATCH 9/9] kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define
+
+Signed-off-by: Luka Perkov <luka@openwrt.org>
+CC: Prafulla Wadaskar <prafulla@marvell.com>
+CC: Stefan Roese <sr@denx.de>
+---
+ include/configs/sheevaplug.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/include/configs/sheevaplug.h
++++ b/include/configs/sheevaplug.h
+@@ -10,6 +10,8 @@
+ #ifndef _CONFIG_SHEEVAPLUG_H
+ #define _CONFIG_SHEEVAPLUG_H
+
++#define CONFIG_SYS_GENERIC_BOARD
++
+ /*
+ * Version number information
+ */
+++ /dev/null
-From 45ba20427135e526cfa528773de0cfe215f4dc40 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Sun, 30 Nov 2014 02:41:04 +0100
-Subject: [PATCH 7/9] kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
- include/configs/iconnect.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/iconnect.h
-+++ b/include/configs/iconnect.h
-@@ -9,6 +9,8 @@
- #ifndef _CONFIG_ICONNECT_H
- #define _CONFIG_ICONNECT_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Version number information
- */
+++ /dev/null
-From bd862f4e7a559e38763a5280e35bf7ff14b535f1 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Sun, 30 Nov 2014 02:41:19 +0100
-Subject: [PATCH 8/9] kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
- include/configs/pogo_e02.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/pogo_e02.h
-+++ b/include/configs/pogo_e02.h
-@@ -13,6 +13,8 @@
- #ifndef _CONFIG_POGO_E02_H
- #define _CONFIG_POGO_E02_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Machine type definition and ID
- */
+++ /dev/null
-From 787e23179708ddad7ecd9dcd6c841546689864b0 Mon Sep 17 00:00:00 2001
-From: Luka Perkov <luka@openwrt.org>
-Date: Sun, 30 Nov 2014 02:41:49 +0100
-Subject: [PATCH 9/9] kirkwood: sheevaplug: add CONFIG_SYS_GENERIC_BOARD define
-
-Signed-off-by: Luka Perkov <luka@openwrt.org>
-CC: Prafulla Wadaskar <prafulla@marvell.com>
-CC: Stefan Roese <sr@denx.de>
----
- include/configs/sheevaplug.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/configs/sheevaplug.h
-+++ b/include/configs/sheevaplug.h
-@@ -10,6 +10,8 @@
- #ifndef _CONFIG_SHEEVAPLUG_H
- #define _CONFIG_SHEEVAPLUG_H
-
-+#define CONFIG_SYS_GENERIC_BOARD
-+
- /*
- * Version number information
- */
--- a/include/configs/dockstar.h
+++ b/include/configs/dockstar.h
-@@ -17,20 +17,25 @@
- /*
- * Version number information
- */
--#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar"
-+#define CONFIG_IDENT_STRING "Seagate FreeAgent DockStar"
-
- /*
-- * High Level Configuration Options (easy to change)
-+ * High Level Configuration Options
- */
--#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
--#define CONFIG_KW88F6281 1 /* SOC Name */
--#define CONFIG_MACH_DOCKSTAR /* Machine type */
-+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-+#define CONFIG_KW88F6281 /* SOC Name */
- #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-
- /*
-+ * Machine type
-+ */
-+#define CONFIG_MACH_DOCKSTAR
-+
-+/*
+@@ -31,6 +31,7 @@
* Commands configuration
*/
--#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
+ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
- #include <config_cmd_default.h>
- #define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
-@@ -38,55 +43,52 @@
#define CONFIG_CMD_NAND
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_USB
-+
/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
+@@ -53,29 +54,29 @@
+ * it has to be rounded to sector size
*/
- #include "mv-common.h"
-
--#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
--#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */
-+#undef CONFIG_SYS_PROMPT
-+#define CONFIG_SYS_PROMPT "dockstar => "
-
- /*
-- * Environment variables configurations
-+ * Environment variables configuration
- */
- #ifdef CONFIG_CMD_NAND
--#define CONFIG_ENV_IS_IN_NAND 1
--#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_SECT_SIZE 0x20000
- #else
--#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-+#define CONFIG_ENV_IS_NOWHERE
- #endif
--/*
-- * max 4k env size is enough, but in case of nand
-- * it has to be rounded to sector size
-- */
--#define CONFIG_ENV_SIZE 0x20000 /* 128k */
--#define CONFIG_ENV_ADDR 0x60000
--#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
-+#define CONFIG_ENV_SIZE 0x20000
-+#define CONFIG_ENV_OFFSET 0xe0000
+ #define CONFIG_ENV_SIZE 0x20000 /* 128k */
+-#define CONFIG_ENV_ADDR 0x80000
+-#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
++#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
/*
* Default environment variables
- "ubifsload 0x800000 ${kernel}; " \
- "ubifsload 0x1100000 ${initrd}; " \
- "bootm 0x800000 0x1100000"
--
--#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
-+ "ubi part ubi; " \
-+ "ubi read 0x800000 kernel; " \
++ "ubi part ubi; " \
++ "ubi read 0x800000 kernel; " \
+ "bootz 0x800000"
-+
+
+-#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0xe0000@0x0(uboot)," \
+ "bootargs_root=\0"
/*
-- * Ethernet Driver configuration
-+ * Ethernet driver configuration
- */
- #ifdef CONFIG_CMD_NET
- #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-@@ -102,7 +110,7 @@
- #define CONFIG_CMD_UBI
- #define CONFIG_CMD_UBIFS
- #define CONFIG_RBTREE
--#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-+#define CONFIG_MTD_DEVICE
- #define CONFIG_MTD_PARTITIONS
- #define CONFIG_CMD_MTDPARTS
- #define CONFIG_LZO
+ * Ethernet Driver configuration
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
-@@ -66,30 +66,35 @@
+@@ -59,30 +59,35 @@
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x20000
/*
* Ethernet driver configuration
+--- a/configs/iconnect_defconfig
++++ b/configs/iconnect_defconfig
+@@ -7,6 +7,7 @@ CONFIG_SYS_PROMPT="iconnect => "
+ # CONFIG_CMD_FLASH is not set
+ CONFIG_CMD_USB=y
+ # CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_DHCP=y
+ CONFIG_CMD_MII=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
-@@ -92,7 +92,8 @@
+@@ -74,7 +74,8 @@
"mtdparts=orion_nand:" \
"0xe0000@0x0(uboot)," \
"0x20000@0xe0000(uboot_env)," \
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
-@@ -100,7 +101,7 @@
+@@ -82,7 +83,7 @@
"mtdparts="CONFIG_MTDPARTS \
"kernel=/boot/zImage\0" \
"fdt=/boot/ib62x0.dtb\0" \
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
-@@ -63,23 +63,35 @@
+@@ -54,23 +54,35 @@
#endif
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
-Index: u-boot-2014.10/include/configs/goflexhome.h
-===================================================================
---- u-boot-2014.10.orig/include/configs/goflexhome.h
-+++ u-boot-2014.10/include/configs/goflexhome.h
-@@ -96,20 +96,18 @@
+--- a/include/configs/goflexhome.h
++++ b/include/configs/goflexhome.h
+@@ -87,20 +87,18 @@
*/
#define CONFIG_BOOTCOMMAND \
"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
- "ubifsmount ubi:root; " \
- "ubifsload 0x800000 ${kernel}; " \
- "bootm 0x800000"
-+ "ubi part ubi; " \
-+ "ubi read 0x800000 kernel; " \
++ "ubi part ubi; " \
++ "ubi read 0x800000 kernel; " \
+ "bootz 0x800000"
#define CONFIG_MTDPARTS \
---- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
-+++ b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig
-@@ -84,4 +84,7 @@ source "board/raidsonic/ib62x0/Kconfig"
- source "board/Seagate/dockstar/Kconfig"
- source "board/Seagate/goflexhome/Kconfig"
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -74,4 +74,7 @@ source "board/Seagate/goflexhome/Kconfig
+ source "board/Seagate/nas220/Kconfig"
+ source "board/zyxel/nsa310s/Kconfig"
+config SECOND_STAGE
+ bool "OpenWrt second stage hack"
endif
--- a/include/configs/dockstar.h
+++ b/include/configs/dockstar.h
-@@ -115,4 +115,6 @@
+@@ -98,4 +98,6 @@
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO
#endif /* _CONFIG_DOCKSTAR_H */
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
-@@ -145,4 +145,6 @@
- #define CONFIG_MTD_PARTITIONS
- #define CONFIG_CMD_MTDPARTS
+@@ -114,4 +114,6 @@
+ #define CONFIG_RTC_MV
+ #endif /* CONFIG_CMD_DATE */
+#include "openwrt-kirkwood-common.h"
+
#endif /* _CONFIG_IB62x0_H */
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
-@@ -118,4 +118,6 @@
+@@ -109,4 +109,6 @@
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#endif /* _CONFIG_ICONNECT_H */
--- /dev/null
+++ b/include/configs/openwrt-kirkwood-common.h
-@@ -0,0 +1,52 @@
+@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+ *
+/* Commands */
+#define CONFIG_CMD_BOOTZ
+
-+#if defined(CONFIG_CMD_NET)
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_PING
-+#endif
-+
-+/* Auto boot */
-+#undef CONFIG_BOOTDELAY
-+#define CONFIG_BOOTDELAY 3
-+
+/* Ethernet */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_SERVERIP 192.168.1.2
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
-+/* Flattened Device Tree */
-+#define CONFIG_OF_LIBFDT
-+
+/* Flattened uImage Tree */
-+#define CONFIG_FIT
-+#define CONFIG_FIT_VERBOSE
++#define CONFIG_FIT 1
++#define CONFIG_FIT_VERBOSE 1
+
+/* Various */
+#define CONFIG_BZIP2
+#endif /* __OPENWRT_KIRKWOOD_COMMON_H */
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
-@@ -115,4 +115,6 @@
+@@ -104,4 +104,6 @@
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO
#endif /* _CONFIG_POGO_E02_H */
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
-@@ -143,4 +143,6 @@
- #define CONFIG_CMD_MTDPARTS
- #define CONFIG_LZO
+@@ -109,4 +109,6 @@
+ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
+ #endif /* CONFIG_CMD_IDE */
+#include "openwrt-kirkwood-common.h"
+
#endif /* _CONFIG_SHEEVAPLUG_H */
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
-@@ -133,4 +133,6 @@
+@@ -122,4 +122,6 @@
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
+++ /dev/null
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 7 Feb 2015 21:52:40 +0000 (+0100)
-Subject: Add linux/compiler-gcc5.h to fix builds with gcc5
-X-Git-Tag: v2015.04-rc2~31
-X-Git-Url: http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=478b02f1a7043b673565075ea5016376f3293b23
-
-Add linux/compiler-gcc5.h to fix builds with gcc5
-
-Add linux/compiler-gcc5/h from the kernel sources at:
-
-commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
-Author: Steven Noonan <steven@uplinklabs.net>
-Date: Sat Oct 25 15:09:42 2014 -0700
-
- compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
-
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
projects / openwrt / staging / dangole.git / commitdiff