Reformat various m68k files, so they actually look like Linux sources.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
#include <linux/vt_kern.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#ifdef CONFIG_ZORRO
#include <linux/zorro.h>
-#endif
#include <asm/bootinfo.h>
#include <asm/setup.h>
static char s_cd32[] __initdata = "CD32";
static char s_draco[] __initdata = "Draco";
static char *amiga_models[] __initdata = {
- [AMI_500-AMI_500] = s_a500,
- [AMI_500PLUS-AMI_500] = s_a500p,
- [AMI_600-AMI_500] = s_a600,
- [AMI_1000-AMI_500] = s_a1000,
- [AMI_1200-AMI_500] = s_a1200,
- [AMI_2000-AMI_500] = s_a2000,
- [AMI_2500-AMI_500] = s_a2500,
- [AMI_3000-AMI_500] = s_a3000,
- [AMI_3000T-AMI_500] = s_a3000t,
- [AMI_3000PLUS-AMI_500] = s_a3000p,
- [AMI_4000-AMI_500] = s_a4000,
- [AMI_4000T-AMI_500] = s_a4000t,
- [AMI_CDTV-AMI_500] = s_cdtv,
- [AMI_CD32-AMI_500] = s_cd32,
- [AMI_DRACO-AMI_500] = s_draco,
+ [AMI_500-AMI_500] = s_a500,
+ [AMI_500PLUS-AMI_500] = s_a500p,
+ [AMI_600-AMI_500] = s_a600,
+ [AMI_1000-AMI_500] = s_a1000,
+ [AMI_1200-AMI_500] = s_a1200,
+ [AMI_2000-AMI_500] = s_a2000,
+ [AMI_2500-AMI_500] = s_a2500,
+ [AMI_3000-AMI_500] = s_a3000,
+ [AMI_3000T-AMI_500] = s_a3000t,
+ [AMI_3000PLUS-AMI_500] = s_a3000p,
+ [AMI_4000-AMI_500] = s_a4000,
+ [AMI_4000T-AMI_500] = s_a4000t,
+ [AMI_CDTV-AMI_500] = s_cdtv,
+ [AMI_CD32-AMI_500] = s_cd32,
+ [AMI_DRACO-AMI_500] = s_draco,
};
static char amiga_model_name[13] = "Amiga ";
static void amiga_sched_init(irq_handler_t handler);
/* amiga specific irq functions */
-extern void amiga_init_IRQ (void);
+extern void amiga_init_IRQ(void);
static void amiga_get_model(char *model);
static int amiga_get_hardware_list(char *buffer);
/* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset (void);
-static int a3000_hwclk (int, struct rtc_time *);
-static int a2000_hwclk (int, struct rtc_time *);
-static int amiga_set_clock_mmss (unsigned long);
-static unsigned int amiga_get_ss (void);
-extern void amiga_mksound( unsigned int count, unsigned int ticks );
-static void amiga_reset (void);
+static unsigned long amiga_gettimeoffset(void);
+static int a3000_hwclk(int, struct rtc_time *);
+static int a2000_hwclk(int, struct rtc_time *);
+static int amiga_set_clock_mmss(unsigned long);
+static unsigned int amiga_get_ss(void);
+extern void amiga_mksound(unsigned int count, unsigned int ticks);
+static void amiga_reset(void);
extern void amiga_init_sound(void);
static void amiga_savekmsg_init(void);
static void amiga_mem_console_write(struct console *co, const char *b,
#endif
static struct console amiga_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
*/
static struct {
- struct resource _ciab, _ciaa, _custom, _kickstart;
+ struct resource _ciab, _ciaa, _custom, _kickstart;
} mb_resources = {
- ._ciab = {
- .name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
- },
- ._ciaa = {
- .name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
- },
- ._custom = {
- .name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
- },
- ._kickstart = {
- .name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
- }
+ ._ciab = {
+ .name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
+ },
+ ._ciaa = {
+ .name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
+ },
+ ._custom = {
+ .name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
+ },
+ ._kickstart = {
+ .name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
+ }
};
static struct resource rtc_resource = {
- .start = 0x00dc0000, .end = 0x00dcffff
+ .start = 0x00dc0000, .end = 0x00dcffff
};
static struct resource ram_resource[NUM_MEMINFO];
int amiga_parse_bootinfo(const struct bi_record *record)
{
- int unknown = 0;
- const unsigned long *data = record->data;
+ int unknown = 0;
+ const unsigned long *data = record->data;
- switch (record->tag) {
+ switch (record->tag) {
case BI_AMIGA_MODEL:
- amiga_model = *data;
- break;
+ amiga_model = *data;
+ break;
case BI_AMIGA_ECLOCK:
- amiga_eclock = *data;
- break;
+ amiga_eclock = *data;
+ break;
case BI_AMIGA_CHIPSET:
- amiga_chipset = *data;
- break;
+ amiga_chipset = *data;
+ break;
case BI_AMIGA_CHIP_SIZE:
- amiga_chip_size = *(const int *)data;
- break;
+ amiga_chip_size = *(const int *)data;
+ break;
case BI_AMIGA_VBLANK:
- amiga_vblank = *(const unsigned char *)data;
- break;
+ amiga_vblank = *(const unsigned char *)data;
+ break;
case BI_AMIGA_PSFREQ:
- amiga_psfreq = *(const unsigned char *)data;
- break;
+ amiga_psfreq = *(const unsigned char *)data;
+ break;
case BI_AMIGA_AUTOCON:
#ifdef CONFIG_ZORRO
- if (zorro_num_autocon < ZORRO_NUM_AUTO) {
- const struct ConfigDev *cd = (struct ConfigDev *)data;
- struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
- dev->rom = cd->cd_Rom;
- dev->slotaddr = cd->cd_SlotAddr;
- dev->slotsize = cd->cd_SlotSize;
- dev->resource.start = (unsigned long)cd->cd_BoardAddr;
- dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
- } else
- printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+ if (zorro_num_autocon < ZORRO_NUM_AUTO) {
+ const struct ConfigDev *cd = (struct ConfigDev *)data;
+ struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
+ dev->rom = cd->cd_Rom;
+ dev->slotaddr = cd->cd_SlotAddr;
+ dev->slotsize = cd->cd_SlotSize;
+ dev->resource.start = (unsigned long)cd->cd_BoardAddr;
+ dev->resource.end = dev->resource.start + cd->cd_BoardSize - 1;
+ } else
+ printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
#endif /* CONFIG_ZORRO */
- break;
+ break;
case BI_AMIGA_SERPER:
- /* serial port period: ignored here */
- break;
+ /* serial port period: ignored here */
+ break;
default:
- unknown = 1;
- }
- return(unknown);
+ unknown = 1;
+ }
+ return unknown;
}
/*
static void __init amiga_identify(void)
{
- /* Fill in some default values, if necessary */
- if (amiga_eclock == 0)
- amiga_eclock = 709379;
-
- memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
-
- printk("Amiga hardware found: ");
- if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
- printk("[%s] ", amiga_models[amiga_model-AMI_500]);
- strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
- }
-
- switch(amiga_model) {
- case AMI_UNKNOWN:
- goto Generic;
-
- case AMI_600:
- case AMI_1200:
- AMIGAHW_SET(A1200_IDE);
- AMIGAHW_SET(PCMCIA);
- case AMI_500:
- case AMI_500PLUS:
- case AMI_1000:
- case AMI_2000:
- case AMI_2500:
- AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
- goto Generic;
-
- case AMI_3000:
- case AMI_3000T:
- AMIGAHW_SET(AMBER_FF);
- AMIGAHW_SET(MAGIC_REKICK);
- /* fall through */
- case AMI_3000PLUS:
- AMIGAHW_SET(A3000_SCSI);
- AMIGAHW_SET(A3000_CLK);
- AMIGAHW_SET(ZORRO3);
- goto Generic;
-
- case AMI_4000T:
- AMIGAHW_SET(A4000_SCSI);
- /* fall through */
- case AMI_4000:
- AMIGAHW_SET(A4000_IDE);
- AMIGAHW_SET(A3000_CLK);
- AMIGAHW_SET(ZORRO3);
- goto Generic;
-
- case AMI_CDTV:
- case AMI_CD32:
- AMIGAHW_SET(CD_ROM);
- AMIGAHW_SET(A2000_CLK); /* Is this correct? */
- goto Generic;
-
- Generic:
- AMIGAHW_SET(AMI_VIDEO);
- AMIGAHW_SET(AMI_BLITTER);
- AMIGAHW_SET(AMI_AUDIO);
- AMIGAHW_SET(AMI_FLOPPY);
- AMIGAHW_SET(AMI_KEYBOARD);
- AMIGAHW_SET(AMI_MOUSE);
- AMIGAHW_SET(AMI_SERIAL);
- AMIGAHW_SET(AMI_PARALLEL);
- AMIGAHW_SET(CHIP_RAM);
- AMIGAHW_SET(PAULA);
-
- switch(amiga_chipset) {
- case CS_OCS:
- case CS_ECS:
- case CS_AGA:
- switch (amiga_custom.deniseid & 0xf) {
- case 0x0c:
- AMIGAHW_SET(DENISE_HR);
- break;
- case 0x08:
- AMIGAHW_SET(LISA);
- break;
- }
- break;
- default:
- AMIGAHW_SET(DENISE);
- break;
- }
- switch ((amiga_custom.vposr>>8) & 0x7f) {
- case 0x00:
- AMIGAHW_SET(AGNUS_PAL);
- break;
- case 0x10:
- AMIGAHW_SET(AGNUS_NTSC);
- break;
- case 0x20:
- case 0x21:
- AMIGAHW_SET(AGNUS_HR_PAL);
- break;
- case 0x30:
- case 0x31:
- AMIGAHW_SET(AGNUS_HR_NTSC);
- break;
- case 0x22:
- case 0x23:
- AMIGAHW_SET(ALICE_PAL);
- break;
- case 0x32:
- case 0x33:
- AMIGAHW_SET(ALICE_NTSC);
- break;
- }
- AMIGAHW_SET(ZORRO);
- break;
-
- case AMI_DRACO:
- panic("No support for Draco yet");
-
- default:
- panic("Unknown Amiga Model");
- }
+ /* Fill in some default values, if necessary */
+ if (amiga_eclock == 0)
+ amiga_eclock = 709379;
-#define AMIGAHW_ANNOUNCE(name, str) \
- if (AMIGAHW_PRESENT(name)) \
- printk(str)
-
- AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
- AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
- AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
- AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
- AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
- AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
- AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
- AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
- AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
- AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
- AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
- AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
- AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
- AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
- AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
- AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
- AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
- AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
- AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
- AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
- AMIGAHW_ANNOUNCE(LISA, "LISA ");
- AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
- AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
- AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
- AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
- AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
- AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
- AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
- AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
- if (AMIGAHW_PRESENT(ZORRO))
- printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
- printk("\n");
+ memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
+
+ printk("Amiga hardware found: ");
+ if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
+ printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+ strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
+ }
+
+ switch (amiga_model) {
+ case AMI_UNKNOWN:
+ goto Generic;
+
+ case AMI_600:
+ case AMI_1200:
+ AMIGAHW_SET(A1200_IDE);
+ AMIGAHW_SET(PCMCIA);
+ case AMI_500:
+ case AMI_500PLUS:
+ case AMI_1000:
+ case AMI_2000:
+ case AMI_2500:
+ AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
+ goto Generic;
+
+ case AMI_3000:
+ case AMI_3000T:
+ AMIGAHW_SET(AMBER_FF);
+ AMIGAHW_SET(MAGIC_REKICK);
+ /* fall through */
+ case AMI_3000PLUS:
+ AMIGAHW_SET(A3000_SCSI);
+ AMIGAHW_SET(A3000_CLK);
+ AMIGAHW_SET(ZORRO3);
+ goto Generic;
+
+ case AMI_4000T:
+ AMIGAHW_SET(A4000_SCSI);
+ /* fall through */
+ case AMI_4000:
+ AMIGAHW_SET(A4000_IDE);
+ AMIGAHW_SET(A3000_CLK);
+ AMIGAHW_SET(ZORRO3);
+ goto Generic;
+
+ case AMI_CDTV:
+ case AMI_CD32:
+ AMIGAHW_SET(CD_ROM);
+ AMIGAHW_SET(A2000_CLK); /* Is this correct? */
+ goto Generic;
+
+ Generic:
+ AMIGAHW_SET(AMI_VIDEO);
+ AMIGAHW_SET(AMI_BLITTER);
+ AMIGAHW_SET(AMI_AUDIO);
+ AMIGAHW_SET(AMI_FLOPPY);
+ AMIGAHW_SET(AMI_KEYBOARD);
+ AMIGAHW_SET(AMI_MOUSE);
+ AMIGAHW_SET(AMI_SERIAL);
+ AMIGAHW_SET(AMI_PARALLEL);
+ AMIGAHW_SET(CHIP_RAM);
+ AMIGAHW_SET(PAULA);
+
+ switch (amiga_chipset) {
+ case CS_OCS:
+ case CS_ECS:
+ case CS_AGA:
+ switch (amiga_custom.deniseid & 0xf) {
+ case 0x0c:
+ AMIGAHW_SET(DENISE_HR);
+ break;
+ case 0x08:
+ AMIGAHW_SET(LISA);
+ break;
+ }
+ break;
+ default:
+ AMIGAHW_SET(DENISE);
+ break;
+ }
+ switch ((amiga_custom.vposr>>8) & 0x7f) {
+ case 0x00:
+ AMIGAHW_SET(AGNUS_PAL);
+ break;
+ case 0x10:
+ AMIGAHW_SET(AGNUS_NTSC);
+ break;
+ case 0x20:
+ case 0x21:
+ AMIGAHW_SET(AGNUS_HR_PAL);
+ break;
+ case 0x30:
+ case 0x31:
+ AMIGAHW_SET(AGNUS_HR_NTSC);
+ break;
+ case 0x22:
+ case 0x23:
+ AMIGAHW_SET(ALICE_PAL);
+ break;
+ case 0x32:
+ case 0x33:
+ AMIGAHW_SET(ALICE_NTSC);
+ break;
+ }
+ AMIGAHW_SET(ZORRO);
+ break;
+
+ case AMI_DRACO:
+ panic("No support for Draco yet");
+
+ default:
+ panic("Unknown Amiga Model");
+ }
+
+#define AMIGAHW_ANNOUNCE(name, str) \
+ if (AMIGAHW_PRESENT(name)) \
+ printk(str)
+
+ AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
+ AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
+ AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
+ AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
+ AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
+ AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
+ AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
+ AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
+ AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
+ AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
+ AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
+ AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
+ AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
+ AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
+ AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
+ AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
+ AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
+ AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
+ AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
+ AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
+ AMIGAHW_ANNOUNCE(LISA, "LISA ");
+ AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
+ AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
+ AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
+ AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
+ AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
+ AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
+ if (AMIGAHW_PRESENT(ZORRO))
+ printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+ printk("\n");
#undef AMIGAHW_ANNOUNCE
}
void __init config_amiga(void)
{
- int i;
-
- amiga_debug_init();
- amiga_identify();
-
- /* Yuk, we don't have PCI memory */
- iomem_resource.name = "Memory";
- for (i = 0; i < 4; i++)
- request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
-
- mach_sched_init = amiga_sched_init;
- mach_init_IRQ = amiga_init_IRQ;
- mach_get_model = amiga_get_model;
- mach_get_hardware_list = amiga_get_hardware_list;
- mach_gettimeoffset = amiga_gettimeoffset;
- if (AMIGAHW_PRESENT(A3000_CLK)){
- mach_hwclk = a3000_hwclk;
- rtc_resource.name = "A3000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- }
- else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
- mach_hwclk = a2000_hwclk;
- rtc_resource.name = "A2000 RTC";
- request_resource(&iomem_resource, &rtc_resource);
- }
-
- mach_max_dma_address = 0xffffffff; /*
- * default MAX_DMA=0xffffffff
- * on all machines. If we don't
- * do so, the SCSI code will not
- * be able to allocate any mem
- * for transfers, unless we are
- * dealing with a Z2 mem only
- * system. /Jes
- */
-
- mach_set_clock_mmss = amiga_set_clock_mmss;
- mach_get_ss = amiga_get_ss;
- mach_reset = amiga_reset;
+ int i;
+
+ amiga_debug_init();
+ amiga_identify();
+
+ /* Yuk, we don't have PCI memory */
+ iomem_resource.name = "Memory";
+ for (i = 0; i < 4; i++)
+ request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
+
+ mach_sched_init = amiga_sched_init;
+ mach_init_IRQ = amiga_init_IRQ;
+ mach_get_model = amiga_get_model;
+ mach_get_hardware_list = amiga_get_hardware_list;
+ mach_gettimeoffset = amiga_gettimeoffset;
+ if (AMIGAHW_PRESENT(A3000_CLK)) {
+ mach_hwclk = a3000_hwclk;
+ rtc_resource.name = "A3000 RTC";
+ request_resource(&iomem_resource, &rtc_resource);
+ } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+ mach_hwclk = a2000_hwclk;
+ rtc_resource.name = "A2000 RTC";
+ request_resource(&iomem_resource, &rtc_resource);
+ }
+
+ /*
+ * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
+ * code will not be able to allocate any mem for transfers, unless we are
+ * dealing with a Z2 mem only system. /Jes
+ */
+ mach_max_dma_address = 0xffffffff;
+
+ mach_set_clock_mmss = amiga_set_clock_mmss;
+ mach_get_ss = amiga_get_ss;
+ mach_reset = amiga_reset;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = amiga_mksound;
+ mach_beep = amiga_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
- mach_heartbeat = amiga_heartbeat;
+ mach_heartbeat = amiga_heartbeat;
#endif
- /* Fill in the clock values (based on the 700 kHz E-Clock) */
- amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
- amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
-
- /* clear all DMA bits */
- amiga_custom.dmacon = DMAF_ALL;
- /* ensure that the DMA master bit is set */
- amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
-
- /* don't use Z2 RAM as system memory on Z3 capable machines */
- if (AMIGAHW_PRESENT(ZORRO3)) {
- int i, j;
- u32 disabled_z2mem = 0;
- for (i = 0; i < m68k_num_memory; i++)
- if (m68k_memory[i].addr < 16*1024*1024) {
- if (i == 0) {
- /* don't cut off the branch we're sitting on */
- printk("Warning: kernel runs in Zorro II memory\n");
- continue;
+ /* Fill in the clock values (based on the 700 kHz E-Clock) */
+ amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
+ amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
+
+ /* clear all DMA bits */
+ amiga_custom.dmacon = DMAF_ALL;
+ /* ensure that the DMA master bit is set */
+ amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
+
+ /* don't use Z2 RAM as system memory on Z3 capable machines */
+ if (AMIGAHW_PRESENT(ZORRO3)) {
+ int i, j;
+ u32 disabled_z2mem = 0;
+
+ for (i = 0; i < m68k_num_memory; i++) {
+ if (m68k_memory[i].addr < 16*1024*1024) {
+ if (i == 0) {
+ /* don't cut off the branch we're sitting on */
+ printk("Warning: kernel runs in Zorro II memory\n");
+ continue;
+ }
+ disabled_z2mem += m68k_memory[i].size;
+ m68k_num_memory--;
+ for (j = i; j < m68k_num_memory; j++)
+ m68k_memory[j] = m68k_memory[j+1];
+ i--;
+ }
+ }
+ if (disabled_z2mem)
+ printk("%dK of Zorro II memory will not be used as system memory\n",
+ disabled_z2mem>>10);
+ }
+
+ /* request all RAM */
+ for (i = 0; i < m68k_num_memory; i++) {
+ ram_resource[i].name =
+ (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
+ (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
+ "16-bit Slow RAM";
+ ram_resource[i].start = m68k_memory[i].addr;
+ ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
+ request_resource(&iomem_resource, &ram_resource[i]);
+ }
+
+ /* initialize chipram allocator */
+ amiga_chip_init();
+
+ /* debugging using chipram */
+ if (!strcmp(m68k_debug_device, "mem")) {
+ if (!AMIGAHW_PRESENT(CHIP_RAM))
+ printk("Warning: no chipram present for debugging\n");
+ else {
+ amiga_savekmsg_init();
+ amiga_console_driver.write = amiga_mem_console_write;
+ register_console(&amiga_console_driver);
+ }
}
- disabled_z2mem += m68k_memory[i].size;
- m68k_num_memory--;
- for (j = i; j < m68k_num_memory; j++)
- m68k_memory[j] = m68k_memory[j+1];
- i--;
- }
- if (disabled_z2mem)
- printk("%dK of Zorro II memory will not be used as system memory\n",
- disabled_z2mem>>10);
- }
-
- /* request all RAM */
- for (i = 0; i < m68k_num_memory; i++) {
- ram_resource[i].name =
- (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
- (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
- "16-bit Slow RAM";
- ram_resource[i].start = m68k_memory[i].addr;
- ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
- request_resource(&iomem_resource, &ram_resource[i]);
- }
-
- /* initialize chipram allocator */
- amiga_chip_init ();
-
- /* debugging using chipram */
- if (!strcmp( m68k_debug_device, "mem" )){
- if (!AMIGAHW_PRESENT(CHIP_RAM))
- printk("Warning: no chipram present for debugging\n");
- else {
- amiga_savekmsg_init();
- amiga_console_driver.write = amiga_mem_console_write;
- register_console(&amiga_console_driver);
- }
- }
-
- /* our beloved beeper */
- if (AMIGAHW_PRESENT(AMI_AUDIO))
- amiga_init_sound();
-
- /*
- * if it is an A3000, set the magic bit that forces
- * a hard rekick
- */
- if (AMIGAHW_PRESENT(MAGIC_REKICK))
- *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
+
+ /* our beloved beeper */
+ if (AMIGAHW_PRESENT(AMI_AUDIO))
+ amiga_init_sound();
+
+ /*
+ * if it is an A3000, set the magic bit that forces
+ * a hard rekick
+ */
+ if (AMIGAHW_PRESENT(MAGIC_REKICK))
+ *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
}
static unsigned short jiffy_ticks;
static void __init amiga_sched_init(irq_handler_t timer_routine)
{
static struct resource sched_res = {
- .name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
+ .name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
};
jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
if (request_resource(&mb_resources._ciab, &sched_res))
- printk("Cannot allocate ciab.ta{lo,hi}\n");
+ printk("Cannot allocate ciab.ta{lo,hi}\n");
ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
ciab.talo = jiffy_ticks % 256;
ciab.tahi = jiffy_ticks / 256;
#define TICK_SIZE 10000
/* This is always executed with interrupts disabled. */
-static unsigned long amiga_gettimeoffset (void)
+static unsigned long amiga_gettimeoffset(void)
{
unsigned short hi, lo, hi2;
unsigned long ticks, offset = 0;
tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
- {
- tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
- udelay(70);
- tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+ tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+ udelay(70);
+ tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
}
if (!cnt)
- printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
+ printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
+ tod_2000.cntrl1);
if (!op) { /* read */
t->tm_sec = tod_2000.second1 * 10 + tod_2000.second2;
if (t->tm_year <= 69)
t->tm_year += 100;
- if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)){
+ if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
t->tm_hour = 0;
else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
return 0;
}
-static int amiga_set_clock_mmss (unsigned long nowtime)
+static int amiga_set_clock_mmss(unsigned long nowtime)
{
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
- while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
- {
+ while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
udelay(70);
tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
return 0;
}
-static unsigned int amiga_get_ss( void )
+static unsigned int amiga_get_ss(void)
{
unsigned int s;
return s;
}
-static NORET_TYPE void amiga_reset( void )
+static NORET_TYPE void amiga_reset(void)
ATTRIB_NORET;
-static void amiga_reset (void)
+static void amiga_reset(void)
{
- unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
- unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
-
- local_irq_disable();
- if (CPU_IS_040_OR_060)
- /* Setup transparent translation registers for mapping
- * of 16 MB kernel segment before disabling translation
- */
- __asm__ __volatile__
- ("movel %0,%/d0\n\t"
- "andl #0xff000000,%/d0\n\t"
- "orw #0xe020,%/d0\n\t" /* map 16 MB, enable, cacheable */
- ".chip 68040\n\t"
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%dtt0\n\t"
- ".chip 68k\n\t"
- "jmp %0@\n\t"
- : /* no outputs */
- : "a" (jmp_addr040));
- else
- /* for 680[23]0, just disable translation and jump to the physical
- * address of the label
- */
- __asm__ __volatile__
- ("pmove %/tc,%@\n\t"
- "bclr #7,%@\n\t"
- "pmove %@,%/tc\n\t"
- "jmp %0@\n\t"
- : /* no outputs */
- : "a" (jmp_addr));
- jmp_addr_label040:
- /* disable translation on '040 now */
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- ".chip 68040\n\t"
- "movec %%d0,%%tc\n\t" /* disable MMU */
- ".chip 68k\n\t"
- : /* no outputs */
- : /* no inputs */
- : "d0");
-
- jmp_addr_label:
- /* pickup reset address from AmigaOS ROM, reset devices and jump
- * to reset address
- */
- __asm__ __volatile__
- ("movew #0x2700,%/sr\n\t"
- "leal 0x01000000,%/a0\n\t"
- "subl %/a0@(-0x14),%/a0\n\t"
- "movel %/a0@(4),%/a0\n\t"
- "subql #2,%/a0\n\t"
- "bra 1f\n\t"
- /* align on a longword boundary */
- __ALIGN_STR "\n"
- "1:\n\t"
- "reset\n\t"
- "jmp %/a0@" : /* Just that gcc scans it for % escapes */ );
-
- for (;;);
-
+ unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+ unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
+
+ local_irq_disable();
+ if (CPU_IS_040_OR_060)
+ /* Setup transparent translation registers for mapping
+ * of 16 MB kernel segment before disabling translation
+ */
+ asm volatile ("\n"
+ " move.l %0,%%d0\n"
+ " and.l #0xff000000,%%d0\n"
+ " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k\n"
+ " jmp %0@\n"
+ : /* no outputs */
+ : "a" (jmp_addr040)
+ : "d0");
+ else
+ /* for 680[23]0, just disable translation and jump to the physical
+ * address of the label
+ */
+ asm volatile ("\n"
+ " pmove %%tc,%@\n"
+ " bclr #7,%@\n"
+ " pmove %@,%%tc\n"
+ " jmp %0@\n"
+ : /* no outputs */
+ : "a" (jmp_addr));
+jmp_addr_label040:
+ /* disable translation on '040 now */
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " .chip 68040\n"
+ " movec %%d0,%%tc\n" /* disable MMU */
+ " .chip 68k\n"
+ : /* no outputs */
+ : /* no inputs */
+ : "d0");
+
+ jmp_addr_label:
+ /* pickup reset address from AmigaOS ROM, reset devices and jump
+ * to reset address
+ */
+ asm volatile ("\n"
+ " move.w #0x2700,%sr\n"
+ " lea 0x01000000,%a0\n"
+ " sub.l %a0@(-0x14),%a0\n"
+ " move.l %a0@(4),%a0\n"
+ " subq.l #2,%a0\n"
+ " jra 1f\n"
+ /* align on a longword boundary */
+ " " __ALIGN_STR "\n"
+ "1:\n"
+ " reset\n"
+ " jmp %a0@");
+
+ for (;;)
+ ;
}
#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
struct savekmsg {
- unsigned long magic1; /* SAVEKMSG_MAGIC1 */
- unsigned long magic2; /* SAVEKMSG_MAGIC2 */
- unsigned long magicptr; /* address of magic1 */
- unsigned long size;
- char data[0];
+ unsigned long magic1; /* SAVEKMSG_MAGIC1 */
+ unsigned long magic2; /* SAVEKMSG_MAGIC2 */
+ unsigned long magicptr; /* address of magic1 */
+ unsigned long size;
+ char data[0];
};
static struct savekmsg *savekmsg;
static void amiga_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
- if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
- memcpy(savekmsg->data+savekmsg->size, s, count);
- savekmsg->size += count;
- }
+ if (savekmsg->size + count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
+ memcpy(savekmsg->data + savekmsg->size, s, count);
+ savekmsg->size += count;
+ }
}
static void amiga_savekmsg_init(void)
{
- static struct resource debug_res = { .name = "Debug" };
+ static struct resource debug_res = { .name = "Debug" };
- savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
- savekmsg->magic1 = SAVEKMSG_MAGIC1;
- savekmsg->magic2 = SAVEKMSG_MAGIC2;
- savekmsg->magicptr = ZTWO_PADDR(savekmsg);
- savekmsg->size = 0;
+ savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
+ savekmsg->magic1 = SAVEKMSG_MAGIC1;
+ savekmsg->magic2 = SAVEKMSG_MAGIC2;
+ savekmsg->magicptr = ZTWO_PADDR(savekmsg);
+ savekmsg->size = 0;
}
static void amiga_serial_putc(char c)
{
- amiga_custom.serdat = (unsigned char)c | 0x100;
- while (!(amiga_custom.serdatr & 0x2000))
- ;
+ amiga_custom.serdat = (unsigned char)c | 0x100;
+ while (!(amiga_custom.serdatr & 0x2000))
+ ;
}
void amiga_serial_console_write(struct console *co, const char *s,
- unsigned int count)
+ unsigned int count)
{
- while (count--) {
- if (*s == '\n')
- amiga_serial_putc('\r');
- amiga_serial_putc(*s++);
- }
+ while (count--) {
+ if (*s == '\n')
+ amiga_serial_putc('\r');
+ amiga_serial_putc(*s++);
+ }
}
#ifdef CONFIG_SERIAL_CONSOLE
void amiga_serial_puts(const char *s)
{
- amiga_serial_console_write(NULL, s, strlen(s));
+ amiga_serial_console_write(NULL, s, strlen(s));
}
int amiga_serial_console_wait_key(struct console *co)
{
- int ch;
-
- while (!(amiga_custom.intreqr & IF_RBF))
- barrier();
- ch = amiga_custom.serdatr & 0xff;
- /* clear the interrupt, so that another character can be read */
- amiga_custom.intreq = IF_RBF;
- return ch;
+ int ch;
+
+ while (!(amiga_custom.intreqr & IF_RBF))
+ barrier();
+ ch = amiga_custom.serdatr & 0xff;
+ /* clear the interrupt, so that another character can be read */
+ amiga_custom.intreq = IF_RBF;
+ return ch;
}
void amiga_serial_gets(struct console *co, char *s, int len)
{
- int ch, cnt = 0;
-
- while (1) {
- ch = amiga_serial_console_wait_key(co);
-
- /* Check for backspace. */
- if (ch == 8 || ch == 127) {
- if (cnt == 0) {
- amiga_serial_putc('\007');
- continue;
- }
- cnt--;
- amiga_serial_puts("\010 \010");
- continue;
- }
+ int ch, cnt = 0;
+
+ while (1) {
+ ch = amiga_serial_console_wait_key(co);
+
+ /* Check for backspace. */
+ if (ch == 8 || ch == 127) {
+ if (cnt == 0) {
+ amiga_serial_putc('\007');
+ continue;
+ }
+ cnt--;
+ amiga_serial_puts("\010 \010");
+ continue;
+ }
- /* Check for enter. */
- if (ch == 10 || ch == 13)
- break;
+ /* Check for enter. */
+ if (ch == 10 || ch == 13)
+ break;
- /* See if line is too long. */
- if (cnt >= len + 1) {
- amiga_serial_putc(7);
- cnt--;
- continue;
- }
+ /* See if line is too long. */
+ if (cnt >= len + 1) {
+ amiga_serial_putc(7);
+ cnt--;
+ continue;
+ }
- /* Store and echo character. */
- s[cnt++] = ch;
- amiga_serial_putc(ch);
- }
- /* Print enter. */
- amiga_serial_puts("\r\n");
- s[cnt] = 0;
+ /* Store and echo character. */
+ s[cnt++] = ch;
+ amiga_serial_putc(ch);
+ }
+ /* Print enter. */
+ amiga_serial_puts("\r\n");
+ s[cnt] = 0;
}
#endif
static void __init amiga_debug_init(void)
{
- if (!strcmp( m68k_debug_device, "ser" )) {
+ if (!strcmp(m68k_debug_device, "ser" )) {
/* no initialization required (?) */
amiga_console_driver.write = amiga_serial_console_write;
register_console(&amiga_console_driver);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on)
{
- if (on)
- ciaa.pra &= ~2;
- else
- ciaa.pra |= 2;
+ if (on)
+ ciaa.pra &= ~2;
+ else
+ ciaa.pra |= 2;
}
#endif
static void amiga_get_model(char *model)
{
- strcpy(model, amiga_model_name);
+ strcpy(model, amiga_model_name);
}
static int amiga_get_hardware_list(char *buffer)
{
- int len = 0;
-
- if (AMIGAHW_PRESENT(CHIP_RAM))
- len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
- len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
- amiga_psfreq, amiga_eclock);
- if (AMIGAHW_PRESENT(AMI_VIDEO)) {
- char *type;
- switch(amiga_chipset) {
- case CS_OCS:
- type = "OCS";
- break;
- case CS_ECS:
- type = "ECS";
- break;
- case CS_AGA:
- type = "AGA";
- break;
- default:
- type = "Old or Unknown";
- break;
+ int len = 0;
+
+ if (AMIGAHW_PRESENT(CHIP_RAM))
+ len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+ len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+ amiga_psfreq, amiga_eclock);
+ if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+ char *type;
+ switch (amiga_chipset) {
+ case CS_OCS:
+ type = "OCS";
+ break;
+ case CS_ECS:
+ type = "ECS";
+ break;
+ case CS_AGA:
+ type = "AGA";
+ break;
+ default:
+ type = "Old or Unknown";
+ break;
+ }
+ len += sprintf(buffer+len, "Graphics:\t%s\n", type);
}
- len += sprintf(buffer+len, "Graphics:\t%s\n", type);
- }
#define AMIGAHW_ANNOUNCE(name, str) \
- if (AMIGAHW_PRESENT(name)) \
- len += sprintf (buffer+len, "\t%s\n", str)
-
- len += sprintf (buffer + len, "Detected hardware:\n");
-
- AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
- AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
- AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
- AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
- AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
- AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
- AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
- AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
- AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
- AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
- AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
- AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
- AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
- AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
- AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
- AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
- AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
- AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
- AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
- AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
- AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
- AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
- AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
- AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
- AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
- AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
- AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
- AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
- AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
+ if (AMIGAHW_PRESENT(name)) \
+ len += sprintf (buffer+len, "\t%s\n", str)
+
+ len += sprintf (buffer + len, "Detected hardware:\n");
+
+ AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
+ AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
+ AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
+ AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
+ AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
+ AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
+ AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
+ AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
+ AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
+ AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
+ AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
+ AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
+ AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
+ AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
+ AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
+ AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
+ AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
+ AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
+ AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
+ AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
+ AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
+ AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
+ AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
+ AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
+ AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
+ AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
+ AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
+ AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
#ifdef CONFIG_ZORRO
- if (AMIGAHW_PRESENT(ZORRO))
- len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
- "Device%s\n",
- AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
- zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+ if (AMIGAHW_PRESENT(ZORRO))
+ len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
+ "Device%s\n",
+ AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
+ zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
#endif /* CONFIG_ZORRO */
#undef AMIGAHW_ANNOUNCE
- return(len);
+ return len;
}
int atari_rtc_year_offset;
/* local function prototypes */
-static void atari_reset( void );
+static void atari_reset(void);
static void atari_get_model(char *model);
static int atari_get_hardware_list(char *buffer);
/* atari specific irq functions */
extern void atari_init_IRQ (void);
-extern void atari_mksound( unsigned int count, unsigned int ticks );
+extern void atari_mksound(unsigned int count, unsigned int ticks);
#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on );
+static void atari_heartbeat(int on);
#endif
/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t );
+extern void atari_sched_init(irq_handler_t);
extern unsigned long atari_gettimeoffset (void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
extern void atari_debug_init(void);
-/* I've moved hwreg_present() and hwreg_present_bywrite() out into
- * mm/hwtest.c, to avoid having multiple copies of the same routine
- * in the kernel [I wanted them in hp300 and they were already used
- * in the nubus code. NB: I don't have an Atari so this might (just
- * conceivably) break something.
- * I've preserved the #if 0 version of hwreg_present_bywrite() here
- * for posterity.
- * -- Peter Maydell <pmaydell@chiark.greenend.org.uk>, 05/1998
- */
-
-#if 0
-static int __init
-hwreg_present_bywrite(volatile void *regp, unsigned char val)
-{
- int ret;
- long save_sp, save_vbr;
- static long tmp_vectors[3] = { [2] = (long)&&after_test };
-
- __asm__ __volatile__
- ( "movec %/vbr,%2\n\t" /* save vbr value */
- "movec %4,%/vbr\n\t" /* set up temporary vectors */
- "movel %/sp,%1\n\t" /* save sp */
- "moveq #0,%0\n\t" /* assume not present */
- "moveb %5,%3@\n\t" /* write the hardware reg */
- "cmpb %3@,%5\n\t" /* compare it */
- "seq %0" /* comes here only if reg */
- /* is present */
- : "=d&" (ret), "=r&" (save_sp), "=r&" (save_vbr)
- : "a" (regp), "r" (tmp_vectors), "d" (val)
- );
- after_test:
- __asm__ __volatile__
- ( "movel %0,%/sp\n\t" /* restore sp */
- "movec %1,%/vbr" /* restore vbr */
- : : "r" (save_sp), "r" (save_vbr) : "sp"
- );
-
- return( ret );
-}
-#endif
-
-
/* ++roman: This is a more elaborate test for an SCC chip, since the plain
* Medusa board generates DTACK at the SCC's standard addresses, but a SCC
* board in the Medusa is possible. Also, the addresses where the ST_ESCC
* should be readable without trouble (from channel A!).
*/
-static int __init scc_test( volatile char *ctla )
+static int __init scc_test(volatile char *ctla)
{
- if (!hwreg_present( ctla ))
- return( 0 );
+ if (!hwreg_present(ctla))
+ return 0;
MFPDELAY();
- *ctla = 2; MFPDELAY();
- *ctla = 0x40; MFPDELAY();
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x40;
+ MFPDELAY();
- *ctla = 2; MFPDELAY();
- if (*ctla != 0x40) return( 0 );
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x40)
+ return 0;
MFPDELAY();
- *ctla = 2; MFPDELAY();
- *ctla = 0x60; MFPDELAY();
+ *ctla = 2;
+ MFPDELAY();
+ *ctla = 0x60;
+ MFPDELAY();
- *ctla = 2; MFPDELAY();
- if (*ctla != 0x60) return( 0 );
+ *ctla = 2;
+ MFPDELAY();
+ if (*ctla != 0x60)
+ return 0;
- return( 1 );
+ return 1;
}
int __init atari_parse_bootinfo(const struct bi_record *record)
{
- int unknown = 0;
- const u_long *data = record->data;
+ int unknown = 0;
+ const u_long *data = record->data;
- switch (record->tag) {
+ switch (record->tag) {
case BI_ATARI_MCH_COOKIE:
- atari_mch_cookie = *data;
- break;
+ atari_mch_cookie = *data;
+ break;
case BI_ATARI_MCH_TYPE:
- atari_mch_type = *data;
- break;
+ atari_mch_type = *data;
+ break;
default:
- unknown = 1;
- }
- return(unknown);
+ unknown = 1;
+ break;
+ }
+ return unknown;
}
/* Parse the Atari-specific switches= option. */
-void __init atari_switches_setup( const char *str, unsigned len )
+void __init atari_switches_setup(const char *str, unsigned len)
{
- char switches[len+1];
- char *p;
- int ovsc_shift;
- char *args = switches;
-
- /* copy string to local array, strsep works destructively... */
- strlcpy( switches, str, sizeof(switches) );
- atari_switches = 0;
-
- /* parse the options */
- while ((p = strsep(&args, ",")) != NULL) {
- if (!*p) continue;
- ovsc_shift = 0;
- if (strncmp( p, "ov_", 3 ) == 0) {
- p += 3;
- ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
- }
-
- if (strcmp( p, "ikbd" ) == 0) {
- /* RTS line of IKBD ACIA */
- atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
- }
- else if (strcmp( p, "midi" ) == 0) {
- /* RTS line of MIDI ACIA */
- atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+ char switches[len+1];
+ char *p;
+ int ovsc_shift;
+ char *args = switches;
+
+ /* copy string to local array, strsep works destructively... */
+ strlcpy(switches, str, sizeof(switches));
+ atari_switches = 0;
+
+ /* parse the options */
+ while ((p = strsep(&args, ",")) != NULL) {
+ if (!*p)
+ continue;
+ ovsc_shift = 0;
+ if (strncmp(p, "ov_", 3) == 0) {
+ p += 3;
+ ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
+ }
+
+ if (strcmp(p, "ikbd") == 0) {
+ /* RTS line of IKBD ACIA */
+ atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
+ } else if (strcmp(p, "midi") == 0) {
+ /* RTS line of MIDI ACIA */
+ atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+ } else if (strcmp(p, "snd6") == 0) {
+ atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+ } else if (strcmp(p, "snd7") == 0) {
+ atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
+ }
}
- else if (strcmp( p, "snd6" ) == 0) {
- atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
- }
- else if (strcmp( p, "snd7" ) == 0) {
- atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
- }
- }
}
void __init config_atari(void)
{
- unsigned short tos_version;
+ unsigned short tos_version;
- memset(&atari_hw_present, 0, sizeof(atari_hw_present));
+ memset(&atari_hw_present, 0, sizeof(atari_hw_present));
- atari_debug_init();
+ atari_debug_init();
- ioport_resource.end = 0xFFFFFFFF; /* Change size of I/O space from 64KB
- to 4GB. */
+ /* Change size of I/O space from 64KB to 4GB. */
+ ioport_resource.end = 0xFFFFFFFF;
- mach_sched_init = atari_sched_init;
- mach_init_IRQ = atari_init_IRQ;
- mach_get_model = atari_get_model;
- mach_get_hardware_list = atari_get_hardware_list;
- mach_gettimeoffset = atari_gettimeoffset;
- mach_reset = atari_reset;
- mach_max_dma_address = 0xffffff;
+ mach_sched_init = atari_sched_init;
+ mach_init_IRQ = atari_init_IRQ;
+ mach_get_model = atari_get_model;
+ mach_get_hardware_list = atari_get_hardware_list;
+ mach_gettimeoffset = atari_gettimeoffset;
+ mach_reset = atari_reset;
+ mach_max_dma_address = 0xffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = atari_mksound;
+ mach_beep = atari_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
- mach_heartbeat = atari_heartbeat;
+ mach_heartbeat = atari_heartbeat;
#endif
- /* Set switches as requested by the user */
- if (atari_switches & ATARI_SWITCH_IKBD)
- acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
- if (atari_switches & ATARI_SWITCH_MIDI)
- acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
- if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
- sound_ym.rd_data_reg_sel = 14;
- sound_ym.wd_data = sound_ym.rd_data_reg_sel |
- ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
- ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
- }
-
- /* ++bjoern:
- * Determine hardware present
- */
+ /* Set switches as requested by the user */
+ if (atari_switches & ATARI_SWITCH_IKBD)
+ acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & ATARI_SWITCH_MIDI)
+ acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
+ if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
+ sound_ym.rd_data_reg_sel = 14;
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel |
+ ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
+ ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
+ }
- printk( "Atari hardware found: " );
- if (MACH_IS_MEDUSA || MACH_IS_HADES) {
- /* There's no Atari video hardware on the Medusa, but all the
- * addresses below generate a DTACK so no bus error occurs! */
- }
- else if (hwreg_present( f030_xreg )) {
- ATARIHW_SET(VIDEL_SHIFTER);
- printk( "VIDEL " );
- /* This is a temporary hack: If there is Falcon video
- * hardware, we assume that the ST-DMA serves SCSI instead of
- * ACSI. In the future, there should be a better method for
- * this...
- */
- ATARIHW_SET(ST_SCSI);
- printk( "STDMA-SCSI " );
- }
- else if (hwreg_present( tt_palette )) {
- ATARIHW_SET(TT_SHIFTER);
- printk( "TT_SHIFTER " );
- }
- else if (hwreg_present( &shifter.bas_hi )) {
- if (hwreg_present( &shifter.bas_lo ) &&
- (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
- ATARIHW_SET(EXTD_SHIFTER);
- printk( "EXTD_SHIFTER " );
- }
- else {
- ATARIHW_SET(STND_SHIFTER);
- printk( "STND_SHIFTER " );
- }
- }
- if (hwreg_present( &mfp.par_dt_reg )) {
- ATARIHW_SET(ST_MFP);
- printk( "ST_MFP " );
- }
- if (hwreg_present( &tt_mfp.par_dt_reg )) {
- ATARIHW_SET(TT_MFP);
- printk( "TT_MFP " );
- }
- if (hwreg_present( &tt_scsi_dma.dma_addr_hi )) {
- ATARIHW_SET(SCSI_DMA);
- printk( "TT_SCSI_DMA " );
- }
- if (!MACH_IS_HADES && hwreg_present( &st_dma.dma_hi )) {
- ATARIHW_SET(STND_DMA);
- printk( "STND_DMA " );
- }
- if (MACH_IS_MEDUSA || /* The ST-DMA address registers aren't readable
- * on all Medusas, so the test below may fail */
- (hwreg_present( &st_dma.dma_vhi ) &&
- (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
- st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
- (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
- st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
- ATARIHW_SET(EXTD_DMA);
- printk( "EXTD_DMA " );
- }
- if (hwreg_present( &tt_scsi.scsi_data )) {
- ATARIHW_SET(TT_SCSI);
- printk( "TT_SCSI " );
- }
- if (hwreg_present( &sound_ym.rd_data_reg_sel )) {
- ATARIHW_SET(YM_2149);
- printk( "YM2149 " );
- }
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &tt_dmasnd.ctrl )) {
- ATARIHW_SET(PCM_8BIT);
- printk( "PCM " );
- }
- if (!MACH_IS_HADES && hwreg_present( &falcon_codec.unused5 )) {
- ATARIHW_SET(CODEC);
- printk( "CODEC " );
- }
- if (hwreg_present( &dsp56k_host_interface.icr )) {
- ATARIHW_SET(DSP56K);
- printk( "DSP56K " );
- }
- if (hwreg_present( &tt_scc_dma.dma_ctrl ) &&
+ /* ++bjoern:
+ * Determine hardware present
+ */
+
+ printk("Atari hardware found: ");
+ if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+ /* There's no Atari video hardware on the Medusa, but all the
+ * addresses below generate a DTACK so no bus error occurs! */
+ } else if (hwreg_present(f030_xreg)) {
+ ATARIHW_SET(VIDEL_SHIFTER);
+ printk("VIDEL ");
+ /* This is a temporary hack: If there is Falcon video
+ * hardware, we assume that the ST-DMA serves SCSI instead of
+ * ACSI. In the future, there should be a better method for
+ * this...
+ */
+ ATARIHW_SET(ST_SCSI);
+ printk("STDMA-SCSI ");
+ } else if (hwreg_present(tt_palette)) {
+ ATARIHW_SET(TT_SHIFTER);
+ printk("TT_SHIFTER ");
+ } else if (hwreg_present(&shifter.bas_hi)) {
+ if (hwreg_present(&shifter.bas_lo) &&
+ (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+ ATARIHW_SET(EXTD_SHIFTER);
+ printk("EXTD_SHIFTER ");
+ } else {
+ ATARIHW_SET(STND_SHIFTER);
+ printk("STND_SHIFTER ");
+ }
+ }
+ if (hwreg_present(&mfp.par_dt_reg)) {
+ ATARIHW_SET(ST_MFP);
+ printk("ST_MFP ");
+ }
+ if (hwreg_present(&tt_mfp.par_dt_reg)) {
+ ATARIHW_SET(TT_MFP);
+ printk("TT_MFP ");
+ }
+ if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
+ ATARIHW_SET(SCSI_DMA);
+ printk("TT_SCSI_DMA ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
+ ATARIHW_SET(STND_DMA);
+ printk("STND_DMA ");
+ }
+ /*
+ * The ST-DMA address registers aren't readable
+ * on all Medusas, so the test below may fail
+ */
+ if (MACH_IS_MEDUSA ||
+ (hwreg_present(&st_dma.dma_vhi) &&
+ (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
+ st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
+ (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
+ st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
+ ATARIHW_SET(EXTD_DMA);
+ printk("EXTD_DMA ");
+ }
+ if (hwreg_present(&tt_scsi.scsi_data)) {
+ ATARIHW_SET(TT_SCSI);
+ printk("TT_SCSI ");
+ }
+ if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
+ ATARIHW_SET(YM_2149);
+ printk("YM2149 ");
+ }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&tt_dmasnd.ctrl)) {
+ ATARIHW_SET(PCM_8BIT);
+ printk("PCM ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+ ATARIHW_SET(CODEC);
+ printk("CODEC ");
+ }
+ if (hwreg_present(&dsp56k_host_interface.icr)) {
+ ATARIHW_SET(DSP56K);
+ printk("DSP56K ");
+ }
+ if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
#if 0
- /* This test sucks! Who knows some better? */
- (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
- (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
+ /* This test sucks! Who knows some better? */
+ (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
+ (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
#else
- !MACH_IS_MEDUSA && !MACH_IS_HADES
+ !MACH_IS_MEDUSA && !MACH_IS_HADES
#endif
- ) {
- ATARIHW_SET(SCC_DMA);
- printk( "SCC_DMA " );
- }
- if (scc_test( &scc.cha_a_ctrl )) {
- ATARIHW_SET(SCC);
- printk( "SCC " );
- }
- if (scc_test( &st_escc.cha_b_ctrl )) {
- ATARIHW_SET( ST_ESCC );
- printk( "ST_ESCC " );
- }
- if (MACH_IS_HADES)
- {
- ATARIHW_SET( VME );
- printk( "VME " );
- }
- else if (hwreg_present( &tt_scu.sys_mask )) {
- ATARIHW_SET(SCU);
- /* Assume a VME bus if there's a SCU */
- ATARIHW_SET( VME );
- printk( "VME SCU " );
- }
- if (hwreg_present( (void *)(0xffff9210) )) {
- ATARIHW_SET(ANALOG_JOY);
- printk( "ANALOG_JOY " );
- }
- if (!MACH_IS_HADES && hwreg_present( blitter.halftone )) {
- ATARIHW_SET(BLITTER);
- printk( "BLITTER " );
- }
- if (hwreg_present((void *)0xfff00039)) {
- ATARIHW_SET(IDE);
- printk( "IDE " );
- }
+ ) {
+ ATARIHW_SET(SCC_DMA);
+ printk("SCC_DMA ");
+ }
+ if (scc_test(&scc.cha_a_ctrl)) {
+ ATARIHW_SET(SCC);
+ printk("SCC ");
+ }
+ if (scc_test(&st_escc.cha_b_ctrl)) {
+ ATARIHW_SET(ST_ESCC);
+ printk("ST_ESCC ");
+ }
+ if (MACH_IS_HADES) {
+ ATARIHW_SET(VME);
+ printk("VME ");
+ } else if (hwreg_present(&tt_scu.sys_mask)) {
+ ATARIHW_SET(SCU);
+ /* Assume a VME bus if there's a SCU */
+ ATARIHW_SET(VME);
+ printk("VME SCU ");
+ }
+ if (hwreg_present((void *)(0xffff9210))) {
+ ATARIHW_SET(ANALOG_JOY);
+ printk("ANALOG_JOY ");
+ }
+ if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+ ATARIHW_SET(BLITTER);
+ printk("BLITTER ");
+ }
+ if (hwreg_present((void *)0xfff00039)) {
+ ATARIHW_SET(IDE);
+ printk("IDE ");
+ }
#if 1 /* This maybe wrong */
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &tt_microwire.data ) &&
- hwreg_present( &tt_microwire.mask ) &&
- (tt_microwire.mask = 0x7ff,
- udelay(1),
- tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
- udelay(1),
- tt_microwire.data != 0)) {
- ATARIHW_SET(MICROWIRE);
- while (tt_microwire.mask != 0x7ff) ;
- printk( "MICROWIRE " );
- }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&tt_microwire.data) &&
+ hwreg_present(&tt_microwire.mask) &&
+ (tt_microwire.mask = 0x7ff,
+ udelay(1),
+ tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
+ udelay(1),
+ tt_microwire.data != 0)) {
+ ATARIHW_SET(MICROWIRE);
+ while (tt_microwire.mask != 0x7ff)
+ ;
+ printk("MICROWIRE ");
+ }
#endif
- if (hwreg_present( &tt_rtc.regsel )) {
- ATARIHW_SET(TT_CLK);
- printk( "TT_CLK " );
- mach_hwclk = atari_tt_hwclk;
- mach_set_clock_mmss = atari_tt_set_clock_mmss;
- }
- if (!MACH_IS_HADES && hwreg_present( &mste_rtc.sec_ones)) {
- ATARIHW_SET(MSTE_CLK);
- printk( "MSTE_CLK ");
- mach_hwclk = atari_mste_hwclk;
- mach_set_clock_mmss = atari_mste_set_clock_mmss;
- }
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present( &dma_wd.fdc_speed ) &&
- hwreg_write( &dma_wd.fdc_speed, 0 )) {
- ATARIHW_SET(FDCSPEED);
- printk( "FDC_SPEED ");
- }
- if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
- ATARIHW_SET(ACSI);
- printk( "ACSI " );
- }
- printk("\n");
-
- if (CPU_IS_040_OR_060)
- /* Now it seems to be safe to turn of the tt0 transparent
- * translation (the one that must not be turned off in
- * head.S...)
- */
- __asm__ volatile ("moveq #0,%/d0\n\t"
- ".chip 68040\n\t"
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%dtt0\n\t"
- ".chip 68k"
- : /* no outputs */
- : /* no inputs */
- : "d0");
-
- /* allocator for memory that must reside in st-ram */
- atari_stram_init ();
-
- /* Set up a mapping for the VMEbus address region:
- *
- * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
- * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
- * 0xfe000000 virt., because this can be done with a single
- * transparent translation. On the 68040, lots of often unused
- * page tables would be needed otherwise. On a MegaSTE or similar,
- * the highest byte is stripped off by hardware due to the 24 bit
- * design of the bus.
- */
+ if (hwreg_present(&tt_rtc.regsel)) {
+ ATARIHW_SET(TT_CLK);
+ printk("TT_CLK ");
+ mach_hwclk = atari_tt_hwclk;
+ mach_set_clock_mmss = atari_tt_set_clock_mmss;
+ }
+ if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+ ATARIHW_SET(MSTE_CLK);
+ printk("MSTE_CLK ");
+ mach_hwclk = atari_mste_hwclk;
+ mach_set_clock_mmss = atari_mste_set_clock_mmss;
+ }
+ if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+ hwreg_present(&dma_wd.fdc_speed) &&
+ hwreg_write(&dma_wd.fdc_speed, 0)) {
+ ATARIHW_SET(FDCSPEED);
+ printk("FDC_SPEED ");
+ }
+ if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+ ATARIHW_SET(ACSI);
+ printk("ACSI ");
+ }
+ printk("\n");
+
+ if (CPU_IS_040_OR_060)
+ /* Now it seems to be safe to turn of the tt0 transparent
+ * translation (the one that must not be turned off in
+ * head.S...)
+ */
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k"
+ : /* no outputs */
+ : /* no inputs */
+ : "d0");
+
+ /* allocator for memory that must reside in st-ram */
+ atari_stram_init();
+
+ /* Set up a mapping for the VMEbus address region:
+ *
+ * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
+ * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
+ * 0xfe000000 virt., because this can be done with a single
+ * transparent translation. On the 68040, lots of often unused
+ * page tables would be needed otherwise. On a MegaSTE or similar,
+ * the highest byte is stripped off by hardware due to the 24 bit
+ * design of the bus.
+ */
+
+ if (CPU_IS_020_OR_030) {
+ unsigned long tt1_val;
+ tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
+ * inhibit, read and write, FDC mask = 3,
+ * FDC val = 4 -> Supervisor only */
+ asm volatile ("\n"
+ " .chip 68030\n"
+ " pmove %0@,%/tt1\n"
+ " .chip 68k"
+ : : "a" (&tt1_val));
+ } else {
+ asm volatile ("\n"
+ " .chip 68040\n"
+ " movec %0,%%itt1\n"
+ " movec %0,%%dtt1\n"
+ " .chip 68k"
+ :
+ : "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable,
+ * supervisor only, non-cacheable/
+ * serialized, writable */
+
+ }
- if (CPU_IS_020_OR_030) {
- unsigned long tt1_val;
- tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
- * inhibit, read and write, FDC mask = 3,
- * FDC val = 4 -> Supervisor only */
- __asm__ __volatile__ ( ".chip 68030\n\t"
- "pmove %0@,%/tt1\n\t"
- ".chip 68k"
- : : "a" (&tt1_val) );
- }
- else {
- __asm__ __volatile__
- ( "movel %0,%/d0\n\t"
- ".chip 68040\n\t"
- "movec %%d0,%%itt1\n\t"
- "movec %%d0,%%dtt1\n\t"
- ".chip 68k"
- :
- : "g" (0xfe00a040) /* Translate 0xfexxxxxx, enable,
- * supervisor only, non-cacheable/
- * serialized, writable */
- : "d0" );
-
- }
-
- /* Fetch tos version at Physical 2 */
- /* We my not be able to access this address if the kernel is
- loaded to st ram, since the first page is unmapped. On the
- Medusa this is always the case and there is nothing we can do
- about this, so we just assume the smaller offset. For the TT
- we use the fact that in head.S we have set up a mapping
- 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
- in the last 16MB of the address space. */
- tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
- 0xfff : *(unsigned short *)0xff000002;
- atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
+ /* Fetch tos version at Physical 2 */
+ /*
+ * We my not be able to access this address if the kernel is
+ * loaded to st ram, since the first page is unmapped. On the
+ * Medusa this is always the case and there is nothing we can do
+ * about this, so we just assume the smaller offset. For the TT
+ * we use the fact that in head.S we have set up a mapping
+ * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
+ * in the last 16MB of the address space.
+ */
+ tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+ 0xfff : *(unsigned short *)0xff000002;
+ atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
}
#ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on )
+static void atari_heartbeat(int on)
{
- unsigned char tmp;
- unsigned long flags;
+ unsigned char tmp;
+ unsigned long flags;
- if (atari_dont_touch_floppy_select)
- return;
+ if (atari_dont_touch_floppy_select)
+ return;
- local_irq_save(flags);
- sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
- tmp = sound_ym.rd_data_reg_sel;
- sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
- local_irq_restore(flags);
+ local_irq_save(flags);
+ sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
+ local_irq_restore(flags);
}
#endif
/* ++andreas: no need for complicated code, just depend on prefetch */
-static void atari_reset (void)
+static void atari_reset(void)
{
- long tc_val = 0;
- long reset_addr;
-
- /* On the Medusa, phys. 0x4 may contain garbage because it's no
- ROM. See above for explanation why we cannot use PTOV(4). */
- reset_addr = MACH_IS_HADES ? 0x7fe00030 :
- MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
- *(unsigned long *) 0xff000004;
-
- /* reset ACIA for switch off OverScan, if it's active */
- if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
- acia.key_ctrl = ACIA_RESET;
- if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
- acia.mid_ctrl = ACIA_RESET;
-
- /* processor independent: turn off interrupts and reset the VBR;
- * the caches must be left enabled, else prefetching the final jump
- * instruction doesn't work. */
- local_irq_disable();
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- "movec %/d0,%/vbr"
- : : : "d0" );
-
- if (CPU_IS_040_OR_060) {
- unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
- if (CPU_IS_060) {
- /* 68060: clear PCR to turn off superscalar operation */
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- ".chip 68060\n\t"
- "movec %%d0,%%pcr\n\t"
- ".chip 68k"
- : : : "d0" );
- }
-
- __asm__ __volatile__
- ("movel %0,%/d0\n\t"
- "andl #0xff000000,%/d0\n\t"
- "orw #0xe020,%/d0\n\t" /* map 16 MB, enable, cacheable */
- ".chip 68040\n\t"
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%dtt0\n\t"
- ".chip 68k\n\t"
- "jmp %0@\n\t"
- : /* no outputs */
- : "a" (jmp_addr040)
- : "d0" );
- jmp_addr_label040:
- __asm__ __volatile__
- ("moveq #0,%/d0\n\t"
- "nop\n\t"
- ".chip 68040\n\t"
- "cinva %%bc\n\t"
- "nop\n\t"
- "pflusha\n\t"
- "nop\n\t"
- "movec %%d0,%%tc\n\t"
- "nop\n\t"
- /* the following setup of transparent translations is needed on the
- * Afterburner040 to successfully reboot. Other machines shouldn't
- * care about a different tt regs setup, they also didn't care in
- * the past that the regs weren't turned off. */
- "movel #0xffc000,%%d0\n\t" /* whole insn space cacheable */
- "movec %%d0,%%itt0\n\t"
- "movec %%d0,%%itt1\n\t"
- "orw #0x40,%/d0\n\t" /* whole data space non-cacheable/ser. */
- "movec %%d0,%%dtt0\n\t"
- "movec %%d0,%%dtt1\n\t"
- ".chip 68k\n\t"
- "jmp %0@"
- : /* no outputs */
- : "a" (reset_addr)
- : "d0");
- }
- else
- __asm__ __volatile__
- ("pmove %0@,%/tc\n\t"
- "jmp %1@"
- : /* no outputs */
- : "a" (&tc_val), "a" (reset_addr));
+ long tc_val = 0;
+ long reset_addr;
+
+ /*
+ * On the Medusa, phys. 0x4 may contain garbage because it's no
+ * ROM. See above for explanation why we cannot use PTOV(4).
+ */
+ reset_addr = MACH_IS_HADES ? 0x7fe00030 :
+ MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+ *(unsigned long *) 0xff000004;
+
+ /* reset ACIA for switch off OverScan, if it's active */
+ if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+ acia.key_ctrl = ACIA_RESET;
+ if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
+ acia.mid_ctrl = ACIA_RESET;
+
+ /* processor independent: turn off interrupts and reset the VBR;
+ * the caches must be left enabled, else prefetching the final jump
+ * instruction doesn't work.
+ */
+ local_irq_disable();
+ asm volatile ("movec %0,%%vbr"
+ : : "d" (0));
+
+ if (CPU_IS_040_OR_060) {
+ unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+ if (CPU_IS_060) {
+ /* 68060: clear PCR to turn off superscalar operation */
+ asm volatile ("\n"
+ " .chip 68060\n"
+ " movec %0,%%pcr\n"
+ " .chip 68k"
+ : : "d" (0));
+ }
+
+ asm volatile ("\n"
+ " move.l %0,%%d0\n"
+ " and.l #0xff000000,%%d0\n"
+ " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
+ " .chip 68040\n"
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%dtt0\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : : "a" (jmp_addr040)
+ : "d0");
+ jmp_addr_label040:
+ asm volatile ("\n"
+ " moveq #0,%%d0\n"
+ " nop\n"
+ " .chip 68040\n"
+ " cinva %%bc\n"
+ " nop\n"
+ " pflusha\n"
+ " nop\n"
+ " movec %%d0,%%tc\n"
+ " nop\n"
+ /* the following setup of transparent translations is needed on the
+ * Afterburner040 to successfully reboot. Other machines shouldn't
+ * care about a different tt regs setup, they also didn't care in
+ * the past that the regs weren't turned off. */
+ " move.l #0xffc000,%%d0\n" /* whole insn space cacheable */
+ " movec %%d0,%%itt0\n"
+ " movec %%d0,%%itt1\n"
+ " or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */
+ " movec %%d0,%%dtt0\n"
+ " movec %%d0,%%dtt1\n"
+ " .chip 68k\n"
+ " jmp %0@"
+ : /* no outputs */
+ : "a" (reset_addr)
+ : "d0");
+ } else
+ asm volatile ("\n"
+ " pmove %0@,%%tc\n"
+ " jmp %1@"
+ : /* no outputs */
+ : "a" (&tc_val), "a" (reset_addr));
}
static void atari_get_model(char *model)
{
- strcpy(model, "Atari ");
- switch (atari_mch_cookie >> 16) {
+ strcpy(model, "Atari ");
+ switch (atari_mch_cookie >> 16) {
case ATARI_MCH_ST:
- if (ATARIHW_PRESENT(MSTE_CLK))
- strcat (model, "Mega ST");
- else
- strcat (model, "ST");
- break;
+ if (ATARIHW_PRESENT(MSTE_CLK))
+ strcat(model, "Mega ST");
+ else
+ strcat(model, "ST");
+ break;
case ATARI_MCH_STE:
- if (MACH_IS_MSTE)
- strcat (model, "Mega STE");
- else
- strcat (model, "STE");
- break;
+ if (MACH_IS_MSTE)
+ strcat(model, "Mega STE");
+ else
+ strcat(model, "STE");
+ break;
case ATARI_MCH_TT:
- if (MACH_IS_MEDUSA)
- /* Medusa has TT _MCH cookie */
- strcat (model, "Medusa");
- else if (MACH_IS_HADES)
- strcat(model, "Hades");
- else
- strcat (model, "TT");
- break;
+ if (MACH_IS_MEDUSA)
+ /* Medusa has TT _MCH cookie */
+ strcat(model, "Medusa");
+ else if (MACH_IS_HADES)
+ strcat(model, "Hades");
+ else
+ strcat(model, "TT");
+ break;
case ATARI_MCH_FALCON:
- strcat (model, "Falcon");
- if (MACH_IS_AB40)
- strcat (model, " (with Afterburner040)");
- break;
+ strcat(model, "Falcon");
+ if (MACH_IS_AB40)
+ strcat(model, " (with Afterburner040)");
+ break;
default:
- sprintf (model + strlen (model), "(unknown mach cookie 0x%lx)",
- atari_mch_cookie);
- break;
- }
+ sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
+ atari_mch_cookie);
+ break;
+ }
}
static int atari_get_hardware_list(char *buffer)
{
- int len = 0, i;
-
- for (i = 0; i < m68k_num_memory; i++)
- len += sprintf (buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
- m68k_memory[i].size >> 20, m68k_memory[i].addr,
- (m68k_memory[i].addr & 0xff000000 ?
- "alternate RAM" : "ST-RAM"));
-
-#define ATARIHW_ANNOUNCE(name,str) \
- if (ATARIHW_PRESENT(name)) \
- len += sprintf (buffer + len, "\t%s\n", str)
-
- len += sprintf (buffer + len, "Detected hardware:\n");
- ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
- ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
- ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
- ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
- ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
- ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
- ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
- ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
- ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
- ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
- ATARIHW_ANNOUNCE(IDE, "IDE Interface");
- ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
- ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
- ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
- ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
- ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
- ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
- ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
- ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
- ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
- ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
- ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
- ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
- ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
- ATARIHW_ANNOUNCE(SCU, "System Control Unit");
- ATARIHW_ANNOUNCE(BLITTER, "Blitter");
- ATARIHW_ANNOUNCE(VME, "VME Bus");
- ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
- return(len);
+ int len = 0, i;
+
+ for (i = 0; i < m68k_num_memory; i++)
+ len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
+ m68k_memory[i].size >> 20, m68k_memory[i].addr,
+ (m68k_memory[i].addr & 0xff000000 ?
+ "alternate RAM" : "ST-RAM"));
+
+#define ATARIHW_ANNOUNCE(name, str) \
+ if (ATARIHW_PRESENT(name)) \
+ len += sprintf(buffer + len, "\t%s\n", str)
+
+ len += sprintf(buffer + len, "Detected hardware:\n");
+ ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
+ ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
+ ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
+ ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
+ ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
+ ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
+ ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
+ ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
+ ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
+ ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
+ ATARIHW_ANNOUNCE(IDE, "IDE Interface");
+ ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
+ ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
+ ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
+ ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
+ ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
+ ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
+ ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
+ ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
+ ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
+ ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
+ ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
+ ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
+ ATARIHW_ANNOUNCE(SCU, "System Control Unit");
+ ATARIHW_ANNOUNCE(BLITTER, "Blitter");
+ ATARIHW_ANNOUNCE(VME, "VME Bus");
+ ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
+
+ return len;
}
-
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
int atari_SCC_reset_done;
static struct console atari_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
-static inline void ata_mfp_out (char c)
+static inline void ata_mfp_out(char c)
{
- while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
- barrier ();
- mfp.usart_dta = c;
+ while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
+ barrier();
+ mfp.usart_dta = c;
}
-void atari_mfp_console_write (struct console *co, const char *str,
- unsigned int count)
+void atari_mfp_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_mfp_out( '\r' );
- ata_mfp_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_mfp_out('\r');
+ ata_mfp_out(*str++);
+ }
}
-static inline void ata_scc_out (char c)
+static inline void ata_scc_out(char c)
{
- do {
+ do {
+ MFPDELAY();
+ } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
MFPDELAY();
- } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
- MFPDELAY();
- scc.cha_b_data = c;
+ scc.cha_b_data = c;
}
-void atari_scc_console_write (struct console *co, const char *str,
- unsigned int count)
+void atari_scc_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_scc_out( '\r' );
- ata_scc_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_scc_out('\r');
+ ata_scc_out(*str++);
+ }
}
-static inline void ata_midi_out (char c)
+static inline void ata_midi_out(char c)
{
- while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
- barrier ();
- acia.mid_data = c;
+ while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
+ barrier();
+ acia.mid_data = c;
}
-void atari_midi_console_write (struct console *co, const char *str,
- unsigned int count)
+void atari_midi_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- ata_midi_out( '\r' );
- ata_midi_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ ata_midi_out('\r');
+ ata_midi_out(*str++);
+ }
}
-static int ata_par_out (char c)
+static int ata_par_out(char c)
{
- unsigned char tmp;
- /* This a some-seconds timeout in case no printer is connected */
- unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
-
- while( (mfp.par_dt_reg & 1) && --i ) /* wait for BUSY == L */
- ;
- if (!i) return( 0 );
-
- sound_ym.rd_data_reg_sel = 15; /* select port B */
- sound_ym.wd_data = c; /* put char onto port */
- sound_ym.rd_data_reg_sel = 14; /* select port A */
- tmp = sound_ym.rd_data_reg_sel;
- sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
- MFPDELAY(); /* wait a bit */
- sound_ym.wd_data = tmp | 0x20; /* set strobe H */
- return( 1 );
+ unsigned char tmp;
+ /* This a some-seconds timeout in case no printer is connected */
+ unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+ while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+ ;
+ if (!i)
+ return 0;
+
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = c; /* put char onto port */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ tmp = sound_ym.rd_data_reg_sel;
+ sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
+ MFPDELAY(); /* wait a bit */
+ sound_ym.wd_data = tmp | 0x20; /* set strobe H */
+ return 1;
}
-static void atari_par_console_write (struct console *co, const char *str,
- unsigned int count)
+static void atari_par_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- static int printer_present = 1;
-
- if (!printer_present)
- return;
+ static int printer_present = 1;
- while (count--) {
- if (*str == '\n')
- if (!ata_par_out( '\r' )) {
- printer_present = 0;
+ if (!printer_present)
return;
- }
- if (!ata_par_out( *str++ )) {
- printer_present = 0;
- return;
+
+ while (count--) {
+ if (*str == '\n') {
+ if (!ata_par_out('\r')) {
+ printer_present = 0;
+ return;
+ }
+ }
+ if (!ata_par_out(*str++)) {
+ printer_present = 0;
+ return;
+ }
}
- }
}
#ifdef CONFIG_SERIAL_CONSOLE
int atari_mfp_console_wait_key(struct console *co)
{
- while( !(mfp.rcv_stat & 0x80) ) /* wait for rx buf filled */
- barrier();
- return( mfp.usart_dta );
+ while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
+ barrier();
+ return mfp.usart_dta;
}
int atari_scc_console_wait_key(struct console *co)
{
- do {
+ do {
+ MFPDELAY();
+ } while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
MFPDELAY();
- } while( !(scc.cha_b_ctrl & 0x01) ); /* wait for rx buf filled */
- MFPDELAY();
- return( scc.cha_b_data );
+ return scc.cha_b_data;
}
int atari_midi_console_wait_key(struct console *co)
{
- while( !(acia.mid_ctrl & ACIA_RDRF) ) /* wait for rx buf filled */
- barrier();
- return( acia.mid_data );
+ while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
+ barrier();
+ return acia.mid_data;
}
#endif
-/* The following two functions do a quick'n'dirty initialization of the MFP or
+/*
+ * The following two functions do a quick'n'dirty initialization of the MFP or
* SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code. */
+ * serial console code.
+ */
#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_mfp_port( int cflag )
+static void __init atari_init_mfp_port(int cflag)
#else
-void atari_init_mfp_port( int cflag )
+void atari_init_mfp_port(int cflag)
#endif
{
- /* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
- * bps, resp., and work only correct if there's a RSVE or RSSPEED */
- static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
- int baud = cflag & CBAUD;
- int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
- int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* baud_table[] starts at 1200bps */
-
- mfp.trn_stat &= ~0x01; /* disable TX */
- mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
- mfp.tim_ct_cd &= 0x70; /* stop timer D */
- mfp.tim_dt_d = baud_table[baud];
- mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
- mfp.trn_stat |= 0x01; /* enable TX */
-
- atari_MFP_init_done = 1;
+ /*
+ * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+ * bps, resp., and work only correct if there's a RSVE or RSSPEED
+ */
+ static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+ int baud = cflag & CBAUD;
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+ int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* baud_table[] starts at 1200bps */
+
+ mfp.trn_stat &= ~0x01; /* disable TX */
+ mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+ mfp.tim_ct_cd &= 0x70; /* stop timer D */
+ mfp.tim_dt_d = baud_table[baud];
+ mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
+ mfp.trn_stat |= 0x01; /* enable TX */
+
+ atari_MFP_init_done = 1;
}
-#define SCC_WRITE(reg,val) \
- do { \
- scc.cha_b_ctrl = (reg); \
- MFPDELAY(); \
- scc.cha_b_ctrl = (val); \
- MFPDELAY(); \
- } while(0)
+#define SCC_WRITE(reg, val) \
+ do { \
+ scc.cha_b_ctrl = (reg); \
+ MFPDELAY(); \
+ scc.cha_b_ctrl = (val); \
+ MFPDELAY(); \
+ } while (0)
/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
* delay of ~ 60us. */
-#define LONG_DELAY() \
- do { \
- int i; \
- for( i = 100; i > 0; --i ) \
- MFPDELAY(); \
- } while(0)
+#define LONG_DELAY() \
+ do { \
+ int i; \
+ for (i = 100; i > 0; --i) \
+ MFPDELAY(); \
+ } while (0)
#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_scc_port( int cflag )
+static void __init atari_init_scc_port(int cflag)
#else
-void atari_init_scc_port( int cflag )
+void atari_init_scc_port(int cflag)
#endif
{
- extern int atari_SCC_reset_done;
- static int clksrc_table[9] =
- /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
- { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
- static int brgsrc_table[9] =
- /* reg 14: 0 = RTxC, 2 = PCLK */
- { 2, 2, 2, 2, 2, 2, 0, 2, 2 };
- static int clkmode_table[9] =
- /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
- { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
- static int div_table[9] =
- /* reg12 (BRG low) */
- { 208, 138, 103, 50, 24, 11, 1, 0, 0 };
-
- int baud = cflag & CBAUD;
- int clksrc, clkmode, div, reg3, reg5;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* tables starts at 1200bps */
-
- clksrc = clksrc_table[baud];
- clkmode = clkmode_table[baud];
- div = div_table[baud];
- if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
- /* special treatment for TT, where rates >= 38400 are done via TRxC */
- clksrc = 0x28; /* TRxC */
- clkmode = baud == 6 ? 0xc0 :
- baud == 7 ? 0x80 : /* really 76800bps */
- 0x40; /* really 153600bps */
- div = 0;
- }
-
- reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
- reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
-
- (void)scc.cha_b_ctrl; /* reset reg pointer */
- SCC_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCC_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
- 0x04 /* 1 stopbit */ |
- clkmode );
- SCC_WRITE( 3, reg3 );
- SCC_WRITE( 5, reg5 );
- SCC_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCC_WRITE( 10, 0 ); /* NRZ mode */
- SCC_WRITE( 11, clksrc ); /* main clock source */
- SCC_WRITE( 12, div ); /* BRG value */
- SCC_WRITE( 13, 0 ); /* BRG high byte */
- SCC_WRITE( 14, brgsrc_table[baud] );
- SCC_WRITE( 14, brgsrc_table[baud] | (div ? 1 : 0) );
- SCC_WRITE( 3, reg3 | 1 );
- SCC_WRITE( 5, reg5 | 8 );
-
- atari_SCC_reset_done = 1;
- atari_SCC_init_done = 1;
+ extern int atari_SCC_reset_done;
+ static int clksrc_table[9] =
+ /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+ static int brgsrc_table[9] =
+ /* reg 14: 0 = RTxC, 2 = PCLK */
+ { 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+ static int clkmode_table[9] =
+ /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+ { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+ static int div_table[9] =
+ /* reg12 (BRG low) */
+ { 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+ int baud = cflag & CBAUD;
+ int clksrc, clkmode, div, reg3, reg5;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* tables starts at 1200bps */
+
+ clksrc = clksrc_table[baud];
+ clkmode = clkmode_table[baud];
+ div = div_table[baud];
+ if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+ /* special treatment for TT, where rates >= 38400 are done via TRxC */
+ clksrc = 0x28; /* TRxC */
+ clkmode = baud == 6 ? 0xc0 :
+ baud == 7 ? 0x80 : /* really 76800bps */
+ 0x40; /* really 153600bps */
+ div = 0;
+ }
+
+ reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+ reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+ (void)scc.cha_b_ctrl; /* reset reg pointer */
+ SCC_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
+ : 0 | 0x04 /* 1 stopbit */ | clkmode);
+ SCC_WRITE(3, reg3);
+ SCC_WRITE(5, reg5);
+ SCC_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCC_WRITE(10, 0); /* NRZ mode */
+ SCC_WRITE(11, clksrc); /* main clock source */
+ SCC_WRITE(12, div); /* BRG value */
+ SCC_WRITE(13, 0); /* BRG high byte */
+ SCC_WRITE(14, brgsrc_table[baud]);
+ SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
+ SCC_WRITE(3, reg3 | 1);
+ SCC_WRITE(5, reg5 | 8);
+
+ atari_SCC_reset_done = 1;
+ atari_SCC_init_done = 1;
}
#ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_midi_port( int cflag )
+static void __init atari_init_midi_port(int cflag)
#else
-void atari_init_midi_port( int cflag )
+void atari_init_midi_port(int cflag)
#endif
{
- int baud = cflag & CBAUD;
- int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
- /* warning 7N1 isn't possible! (instead 7O2 is used...) */
- int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
- int div;
-
- /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
- * default) the standard MIDI speed 31250. */
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud == B4800)
- div = ACIA_DIV64; /* really 7812.5 bps */
- else if (baud == B38400+2 /* 115200 */)
- div = ACIA_DIV1; /* really 500 kbps (does that work??) */
- else
- div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
-
- /* RTS low, ints disabled */
- acia.mid_ctrl = div | csize | parity |
+ int baud = cflag & CBAUD;
+ int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+ /* warning 7N1 isn't possible! (instead 7O2 is used...) */
+ int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+ int div;
+
+ /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+ * default) the standard MIDI speed 31250. */
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud == B4800)
+ div = ACIA_DIV64; /* really 7812.5 bps */
+ else if (baud == B38400+2 /* 115200 */)
+ div = ACIA_DIV1; /* really 500 kbps (does that work??) */
+ else
+ div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
+
+ /* RTS low, ints disabled */
+ acia.mid_ctrl = div | csize | parity |
((atari_switches & ATARI_SWITCH_MIDI) ?
ACIA_RHTID : ACIA_RLTID);
}
void __init atari_debug_init(void)
{
- if (!strcmp( m68k_debug_device, "ser" )) {
- /* defaults to ser2 for a Falcon and ser1 otherwise */
- strcpy( m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1" );
-
- }
-
- if (!strcmp( m68k_debug_device, "ser1" )) {
- /* ST-MFP Modem1 serial port */
- atari_init_mfp_port( B9600|CS8 );
- atari_console_driver.write = atari_mfp_console_write;
- }
- else if (!strcmp( m68k_debug_device, "ser2" )) {
- /* SCC Modem2 serial port */
- atari_init_scc_port( B9600|CS8 );
- atari_console_driver.write = atari_scc_console_write;
- }
- else if (!strcmp( m68k_debug_device, "midi" )) {
- /* MIDI port */
- atari_init_midi_port( B9600|CS8 );
- atari_console_driver.write = atari_midi_console_write;
- }
- else if (!strcmp( m68k_debug_device, "par" )) {
- /* parallel printer */
- atari_turnoff_irq( IRQ_MFP_BUSY ); /* avoid ints */
- sound_ym.rd_data_reg_sel = 7; /* select mixer control */
- sound_ym.wd_data = 0xff; /* sound off, ports are output */
- sound_ym.rd_data_reg_sel = 15; /* select port B */
- sound_ym.wd_data = 0; /* no char */
- sound_ym.rd_data_reg_sel = 14; /* select port A */
- sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
- atari_console_driver.write = atari_par_console_write;
- }
- if (atari_console_driver.write)
- register_console(&atari_console_driver);
-}
+ if (!strcmp(m68k_debug_device, "ser")) {
+ /* defaults to ser2 for a Falcon and ser1 otherwise */
+ strcpy(m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1");
+ }
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
+ if (!strcmp(m68k_debug_device, "ser1")) {
+ /* ST-MFP Modem1 serial port */
+ atari_init_mfp_port(B9600|CS8);
+ atari_console_driver.write = atari_mfp_console_write;
+ } else if (!strcmp(m68k_debug_device, "ser2")) {
+ /* SCC Modem2 serial port */
+ atari_init_scc_port(B9600|CS8);
+ atari_console_driver.write = atari_scc_console_write;
+ } else if (!strcmp(m68k_debug_device, "midi")) {
+ /* MIDI port */
+ atari_init_midi_port(B9600|CS8);
+ atari_console_driver.write = atari_midi_console_write;
+ } else if (!strcmp(m68k_debug_device, "par")) {
+ /* parallel printer */
+ atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
+ sound_ym.rd_data_reg_sel = 7; /* select mixer control */
+ sound_ym.wd_data = 0xff; /* sound off, ports are output */
+ sound_ym.rd_data_reg_sel = 15; /* select port B */
+ sound_ym.wd_data = 0; /* no char */
+ sound_ym.rd_data_reg_sel = 14; /* select port A */
+ sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+ atari_console_driver.write = atari_par_console_write;
+ }
+ if (atari_console_driver.write)
+ register_console(&atari_console_driver);
+}
.long sys_tgkill /* 265 */
.long sys_utimes
.long sys_fadvise64_64
- .long sys_mbind
+ .long sys_mbind
.long sys_get_mempolicy
.long sys_set_mempolicy /* 270 */
.long sys_mq_open
jbra L(serial_putc_done)
3:
#endif
-
+
L(serial_putc_done):
func_return serial_putc
extern void config_q40(void);
extern void config_sun3x(void);
-extern void mac_debugging_short (int, short);
-extern void mac_debugging_long (int, long);
-
#define MASK_256K 0xfffc0000
extern void paging_init(void);
static void __init m68k_parse_bootinfo(const struct bi_record *record)
{
- while (record->tag != BI_LAST) {
- int unknown = 0;
- const unsigned long *data = record->data;
- switch (record->tag) {
- case BI_MACHTYPE:
- case BI_CPUTYPE:
- case BI_FPUTYPE:
- case BI_MMUTYPE:
- /* Already set up by head.S */
- break;
-
- case BI_MEMCHUNK:
- if (m68k_num_memory < NUM_MEMINFO) {
- m68k_memory[m68k_num_memory].addr = data[0];
- m68k_memory[m68k_num_memory].size = data[1];
- m68k_num_memory++;
- } else
- printk("m68k_parse_bootinfo: too many memory chunks\n");
- break;
-
- case BI_RAMDISK:
- m68k_ramdisk.addr = data[0];
- m68k_ramdisk.size = data[1];
- break;
-
- case BI_COMMAND_LINE:
- strlcpy(m68k_command_line, (const char *)data, sizeof(m68k_command_line));
- break;
-
- default:
- if (MACH_IS_AMIGA)
- unknown = amiga_parse_bootinfo(record);
- else if (MACH_IS_ATARI)
- unknown = atari_parse_bootinfo(record);
- else if (MACH_IS_MAC)
- unknown = mac_parse_bootinfo(record);
- else if (MACH_IS_Q40)
- unknown = q40_parse_bootinfo(record);
- else if (MACH_IS_BVME6000)
- unknown = bvme6000_parse_bootinfo(record);
- else if (MACH_IS_MVME16x)
- unknown = mvme16x_parse_bootinfo(record);
- else if (MACH_IS_MVME147)
- unknown = mvme147_parse_bootinfo(record);
- else if (MACH_IS_HP300)
- unknown = hp300_parse_bootinfo(record);
- else
- unknown = 1;
+ while (record->tag != BI_LAST) {
+ int unknown = 0;
+ const unsigned long *data = record->data;
+
+ switch (record->tag) {
+ case BI_MACHTYPE:
+ case BI_CPUTYPE:
+ case BI_FPUTYPE:
+ case BI_MMUTYPE:
+ /* Already set up by head.S */
+ break;
+
+ case BI_MEMCHUNK:
+ if (m68k_num_memory < NUM_MEMINFO) {
+ m68k_memory[m68k_num_memory].addr = data[0];
+ m68k_memory[m68k_num_memory].size = data[1];
+ m68k_num_memory++;
+ } else
+ printk("m68k_parse_bootinfo: too many memory chunks\n");
+ break;
+
+ case BI_RAMDISK:
+ m68k_ramdisk.addr = data[0];
+ m68k_ramdisk.size = data[1];
+ break;
+
+ case BI_COMMAND_LINE:
+ strlcpy(m68k_command_line, (const char *)data,
+ sizeof(m68k_command_line));
+ break;
+
+ default:
+ if (MACH_IS_AMIGA)
+ unknown = amiga_parse_bootinfo(record);
+ else if (MACH_IS_ATARI)
+ unknown = atari_parse_bootinfo(record);
+ else if (MACH_IS_MAC)
+ unknown = mac_parse_bootinfo(record);
+ else if (MACH_IS_Q40)
+ unknown = q40_parse_bootinfo(record);
+ else if (MACH_IS_BVME6000)
+ unknown = bvme6000_parse_bootinfo(record);
+ else if (MACH_IS_MVME16x)
+ unknown = mvme16x_parse_bootinfo(record);
+ else if (MACH_IS_MVME147)
+ unknown = mvme147_parse_bootinfo(record);
+ else if (MACH_IS_HP300)
+ unknown = hp300_parse_bootinfo(record);
+ else
+ unknown = 1;
+ }
+ if (unknown)
+ printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
+ record->tag);
+ record = (struct bi_record *)((unsigned long)record +
+ record->size);
}
- if (unknown)
- printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
- record->tag);
- record = (struct bi_record *)((unsigned long)record+record->size);
- }
- m68k_realnum_memory = m68k_num_memory;
+ m68k_realnum_memory = m68k_num_memory;
#ifdef CONFIG_SINGLE_MEMORY_CHUNK
- if (m68k_num_memory > 1) {
- printk("Ignoring last %i chunks of physical memory\n",
- (m68k_num_memory - 1));
- m68k_num_memory = 1;
- }
- m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
+ if (m68k_num_memory > 1) {
+ printk("Ignoring last %i chunks of physical memory\n",
+ (m68k_num_memory - 1));
+ m68k_num_memory = 1;
+ }
+ m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
#endif
}
/* clear the fpu if we have one */
if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
volatile int zero = 0;
- asm __volatile__ ("frestore %0" : : "m" (zero));
+ asm volatile ("frestore %0" : : "m" (zero));
}
#endif
* For the m68k, this is currently only "debug=xxx" to enable printing
* certain kernel messages to some machine-specific device.
*/
- for( p = *cmdline_p; p && *p; ) {
- i = 0;
- if (!strncmp( p, "debug=", 6 )) {
- strlcpy( m68k_debug_device, p+6, sizeof(m68k_debug_device) );
- if ((q = strchr( m68k_debug_device, ' ' ))) *q = 0;
- i = 1;
- }
+ for (p = *cmdline_p; p && *p;) {
+ i = 0;
+ if (!strncmp(p, "debug=", 6)) {
+ strlcpy(m68k_debug_device, p+6, sizeof(m68k_debug_device));
+ q = strchr(m68k_debug_device, ' ');
+ if (q)
+ *q = 0;
+ i = 1;
+ }
#ifdef CONFIG_ATARI
- /* This option must be parsed very early */
- if (!strncmp( p, "switches=", 9 )) {
- extern void atari_switches_setup( const char *, int );
- atari_switches_setup( p+9, (q = strchr( p+9, ' ' )) ?
- (q - (p+9)) : strlen(p+9) );
- i = 1;
- }
+ /* This option must be parsed very early */
+ if (!strncmp(p, "switches=", 9)) {
+ extern void atari_switches_setup(const char *, int);
+ q = strchr(p + 9, ' ');
+ atari_switches_setup(p + 9, q ? (q - (p + 9)) : strlen(p + 9));
+ i = 1;
+ }
#endif
- if (i) {
- /* option processed, delete it */
- if ((q = strchr( p, ' ' )))
- strcpy( p, q+1 );
- else
- *p = 0;
- } else {
- if ((p = strchr( p, ' ' ))) ++p;
- }
+ if (i) {
+ /* option processed, delete it */
+ if ((q = strchr(p, ' ')))
+ strcpy(p, q + 1);
+ else
+ *p = 0;
+ } else {
+ if ((p = strchr(p, ' ')))
+ ++p;
+ }
}
#ifdef CONFIG_DUMMY_CONSOLE
switch (m68k_machtype) {
#ifdef CONFIG_AMIGA
- case MACH_AMIGA:
+ case MACH_AMIGA:
config_amiga();
break;
#endif
#ifdef CONFIG_ATARI
- case MACH_ATARI:
+ case MACH_ATARI:
config_atari();
break;
#endif
#ifdef CONFIG_MAC
- case MACH_MAC:
+ case MACH_MAC:
config_mac();
break;
#endif
#ifdef CONFIG_SUN3
- case MACH_SUN3:
+ case MACH_SUN3:
config_sun3();
break;
#endif
#ifdef CONFIG_APOLLO
- case MACH_APOLLO:
+ case MACH_APOLLO:
config_apollo();
break;
#endif
#ifdef CONFIG_MVME147
- case MACH_MVME147:
+ case MACH_MVME147:
config_mvme147();
break;
#endif
#ifdef CONFIG_MVME16x
- case MACH_MVME16x:
+ case MACH_MVME16x:
config_mvme16x();
break;
#endif
#ifdef CONFIG_BVME6000
- case MACH_BVME6000:
+ case MACH_BVME6000:
config_bvme6000();
break;
#endif
#ifdef CONFIG_HP300
- case MACH_HP300:
+ case MACH_HP300:
config_hp300();
break;
#endif
#ifdef CONFIG_Q40
- case MACH_Q40:
- config_q40();
+ case MACH_Q40:
+ config_q40();
break;
#endif
#ifdef CONFIG_SUN3X
- case MACH_SUN3X:
+ case MACH_SUN3X:
config_sun3x();
break;
#endif
- default:
- panic ("No configuration setup");
+ default:
+ panic("No configuration setup");
}
#ifndef CONFIG_SUN3
reserve_bootmem(m68k_ramdisk.addr, m68k_ramdisk.size);
initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
initrd_end = initrd_start + m68k_ramdisk.size;
- printk ("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
+ printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
}
#endif
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
#if defined(CONFIG_Q40)
if (MACH_IS_Q40) {
- isa_type = Q40_ISA;
- isa_sex = 0;
+ isa_type = Q40_ISA;
+ isa_sex = 0;
}
#elif defined(CONFIG_GG2)
- if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)){
- isa_type = GG2_ISA;
- isa_sex = 0;
+ if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
+ isa_type = GG2_ISA;
+ isa_sex = 0;
}
#elif defined(CONFIG_AMIGA_PCMCIA)
- if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)){
- isa_type = AG_ISA;
- isa_sex = 1;
+ if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
+ isa_type = AG_ISA;
+ isa_sex = 1;
}
#endif
#endif
static int show_cpuinfo(struct seq_file *m, void *v)
{
- const char *cpu, *mmu, *fpu;
- unsigned long clockfreq, clockfactor;
+ const char *cpu, *mmu, *fpu;
+ unsigned long clockfreq, clockfactor;
#define LOOP_CYCLES_68020 (8)
#define LOOP_CYCLES_68030 (8)
#define LOOP_CYCLES_68040 (3)
#define LOOP_CYCLES_68060 (1)
- if (CPU_IS_020) {
- cpu = "68020";
- clockfactor = LOOP_CYCLES_68020;
- } else if (CPU_IS_030) {
- cpu = "68030";
- clockfactor = LOOP_CYCLES_68030;
- } else if (CPU_IS_040) {
- cpu = "68040";
- clockfactor = LOOP_CYCLES_68040;
- } else if (CPU_IS_060) {
- cpu = "68060";
- clockfactor = LOOP_CYCLES_68060;
- } else {
- cpu = "680x0";
- clockfactor = 0;
- }
+ if (CPU_IS_020) {
+ cpu = "68020";
+ clockfactor = LOOP_CYCLES_68020;
+ } else if (CPU_IS_030) {
+ cpu = "68030";
+ clockfactor = LOOP_CYCLES_68030;
+ } else if (CPU_IS_040) {
+ cpu = "68040";
+ clockfactor = LOOP_CYCLES_68040;
+ } else if (CPU_IS_060) {
+ cpu = "68060";
+ clockfactor = LOOP_CYCLES_68060;
+ } else {
+ cpu = "680x0";
+ clockfactor = 0;
+ }
#ifdef CONFIG_M68KFPU_EMU_ONLY
- fpu="none(soft float)";
+ fpu = "none(soft float)";
#else
- if (m68k_fputype & FPU_68881)
- fpu = "68881";
- else if (m68k_fputype & FPU_68882)
- fpu = "68882";
- else if (m68k_fputype & FPU_68040)
- fpu = "68040";
- else if (m68k_fputype & FPU_68060)
- fpu = "68060";
- else if (m68k_fputype & FPU_SUNFPA)
- fpu = "Sun FPA";
- else
- fpu = "none";
+ if (m68k_fputype & FPU_68881)
+ fpu = "68881";
+ else if (m68k_fputype & FPU_68882)
+ fpu = "68882";
+ else if (m68k_fputype & FPU_68040)
+ fpu = "68040";
+ else if (m68k_fputype & FPU_68060)
+ fpu = "68060";
+ else if (m68k_fputype & FPU_SUNFPA)
+ fpu = "Sun FPA";
+ else
+ fpu = "none";
#endif
- if (m68k_mmutype & MMU_68851)
- mmu = "68851";
- else if (m68k_mmutype & MMU_68030)
- mmu = "68030";
- else if (m68k_mmutype & MMU_68040)
- mmu = "68040";
- else if (m68k_mmutype & MMU_68060)
- mmu = "68060";
- else if (m68k_mmutype & MMU_SUN3)
- mmu = "Sun-3";
- else if (m68k_mmutype & MMU_APOLLO)
- mmu = "Apollo";
- else
- mmu = "unknown";
-
- clockfreq = loops_per_jiffy*HZ*clockfactor;
-
- seq_printf(m, "CPU:\t\t%s\n"
+ if (m68k_mmutype & MMU_68851)
+ mmu = "68851";
+ else if (m68k_mmutype & MMU_68030)
+ mmu = "68030";
+ else if (m68k_mmutype & MMU_68040)
+ mmu = "68040";
+ else if (m68k_mmutype & MMU_68060)
+ mmu = "68060";
+ else if (m68k_mmutype & MMU_SUN3)
+ mmu = "Sun-3";
+ else if (m68k_mmutype & MMU_APOLLO)
+ mmu = "Apollo";
+ else
+ mmu = "unknown";
+
+ clockfreq = loops_per_jiffy * HZ * clockfactor;
+
+ seq_printf(m, "CPU:\t\t%s\n"
"MMU:\t\t%s\n"
"FPU:\t\t%s\n"
"Clocking:\t%lu.%1luMHz\n"
clockfreq/1000000,(clockfreq/100000)%10,
loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
loops_per_jiffy);
- return 0;
+ return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
}
struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
};
int get_hardware_list(char *buffer)
{
- int len = 0;
- char model[80];
- unsigned long mem;
- int i;
+ int len = 0;
+ char model[80];
+ unsigned long mem;
+ int i;
- if (mach_get_model)
- mach_get_model(model);
- else
- strcpy(model, "Unknown m68k");
+ if (mach_get_model)
+ mach_get_model(model);
+ else
+ strcpy(model, "Unknown m68k");
- len += sprintf(buffer+len, "Model:\t\t%s\n", model);
- for (mem = 0, i = 0; i < m68k_num_memory; i++)
- mem += m68k_memory[i].size;
- len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
+ len += sprintf(buffer + len, "Model:\t\t%s\n", model);
+ for (mem = 0, i = 0; i < m68k_num_memory; i++)
+ mem += m68k_memory[i].size;
+ len += sprintf(buffer + len, "System Memory:\t%ldK\n", mem >> 10);
- if (mach_get_hardware_list)
- len += mach_get_hardware_list(buffer+len);
+ if (mach_get_hardware_list)
+ len += mach_get_hardware_list(buffer + len);
- return(len);
+ return len;
}
void check_bugs(void)
{
#ifndef CONFIG_M68KFPU_EMU
if (m68k_fputype == 0) {
- printk( KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
- "WHICH IS REQUIRED BY LINUX/M68K ***\n" );
- printk( KERN_EMERG "Upgrade your hardware or join the FPU "
- "emulation project\n" );
- panic( "no FPU" );
+ printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
+ "WHICH IS REQUIRED BY LINUX/M68K ***\n");
+ printk(KERN_EMERG "Upgrade your hardware or join the FPU "
+ "emulation project\n");
+ panic("no FPU");
}
#endif /* !CONFIG_M68KFPU_EMU */
}
extern char m68k_command_line[CL_SIZE];
-void *mac_env; /* Loaded by the boot asm */
+void *mac_env; /* Loaded by the boot asm */
/* The phys. video addr. - might be bogus on some machines */
unsigned long mac_orig_videoaddr;
/* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset (void);
-extern int mac_hwclk (int, struct rtc_time *);
-extern int mac_set_clock_mmss (unsigned long);
+extern unsigned long mac_gettimeoffset(void);
+extern int mac_hwclk(int, struct rtc_time *);
+extern int mac_set_clock_mmss(unsigned long);
extern int show_mac_interrupts(struct seq_file *, void *);
extern void iop_preinit(void);
extern void iop_init(void);
int __init mac_parse_bootinfo(const struct bi_record *record)
{
- int unknown = 0;
- const u_long *data = record->data;
+ int unknown = 0;
+ const u_long *data = record->data;
- switch (record->tag) {
+ switch (record->tag) {
case BI_MAC_MODEL:
- mac_bi_data.id = *data;
- break;
+ mac_bi_data.id = *data;
+ break;
case BI_MAC_VADDR:
- mac_bi_data.videoaddr = *data;
- break;
+ mac_bi_data.videoaddr = *data;
+ break;
case BI_MAC_VDEPTH:
- mac_bi_data.videodepth = *data;
- break;
+ mac_bi_data.videodepth = *data;
+ break;
case BI_MAC_VROW:
- mac_bi_data.videorow = *data;
- break;
+ mac_bi_data.videorow = *data;
+ break;
case BI_MAC_VDIM:
- mac_bi_data.dimensions = *data;
- break;
+ mac_bi_data.dimensions = *data;
+ break;
case BI_MAC_VLOGICAL:
- mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
- mac_orig_videoaddr = *data;
- break;
+ mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
+ mac_orig_videoaddr = *data;
+ break;
case BI_MAC_SCCBASE:
- mac_bi_data.sccbase = *data;
- break;
+ mac_bi_data.sccbase = *data;
+ break;
case BI_MAC_BTIME:
- mac_bi_data.boottime = *data;
- break;
+ mac_bi_data.boottime = *data;
+ break;
case BI_MAC_GMTBIAS:
- mac_bi_data.gmtbias = *data;
- break;
+ mac_bi_data.gmtbias = *data;
+ break;
case BI_MAC_MEMSIZE:
- mac_bi_data.memsize = *data;
- break;
+ mac_bi_data.memsize = *data;
+ break;
case BI_MAC_CPUID:
- mac_bi_data.cpuid = *data;
- break;
- case BI_MAC_ROMBASE:
- mac_bi_data.rombase = *data;
- break;
+ mac_bi_data.cpuid = *data;
+ break;
+ case BI_MAC_ROMBASE:
+ mac_bi_data.rombase = *data;
+ break;
default:
- unknown = 1;
- }
- return(unknown);
+ unknown = 1;
+ break;
+ }
+ return unknown;
}
/*
static void mac_cache_card_flush(int writeback)
{
unsigned long flags;
+
local_irq_save(flags);
via_flush_cache();
local_irq_restore(flags);
void __init config_mac(void)
{
- if (!MACH_IS_MAC) {
- printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
- }
+ if (!MACH_IS_MAC)
+ printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
- mach_sched_init = mac_sched_init;
- mach_init_IRQ = mac_init_IRQ;
- mach_get_model = mac_get_model;
- mach_gettimeoffset = mac_gettimeoffset;
+ mach_sched_init = mac_sched_init;
+ mach_init_IRQ = mac_init_IRQ;
+ mach_get_model = mac_get_model;
+ mach_gettimeoffset = mac_gettimeoffset;
#warning move to adb/via init
#if 0
- mach_hwclk = mac_hwclk;
+ mach_hwclk = mac_hwclk;
#endif
- mach_set_clock_mmss = mac_set_clock_mmss;
- mach_reset = mac_reset;
- mach_halt = mac_poweroff;
- mach_power_off = mac_poweroff;
+ mach_set_clock_mmss = mac_set_clock_mmss;
+ mach_reset = mac_reset;
+ mach_halt = mac_poweroff;
+ mach_power_off = mac_poweroff;
mach_max_dma_address = 0xffffffff;
#if 0
- mach_debug_init = mac_debug_init;
+ mach_debug_init = mac_debug_init;
#endif
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = mac_mksound;
+ mach_beep = mac_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
#if 0
mac_identify();
mac_report_hardware();
- /* AFAIK only the IIci takes a cache card. The IIfx has onboard
- cache ... someone needs to figure out how to tell if it's on or
- not. */
+ /*
+ * AFAIK only the IIci takes a cache card. The IIfx has onboard
+ * cache ... someone needs to figure out how to tell if it's on or
+ * not.
+ */
if (macintosh_config->ident == MAC_MODEL_IICI
- || macintosh_config->ident == MAC_MODEL_IIFX) {
+ || macintosh_config->ident == MAC_MODEL_IIFX)
mach_l2_flush = mac_cache_card_flush;
- }
/*
* Check for machine specific fixups.
*/
#ifdef OLD_NUBUS_CODE
- nubus_sweep_video();
+ nubus_sweep_video();
#endif
}
struct mac_model *macintosh_config;
EXPORT_SYMBOL(macintosh_config);
-static struct mac_model mac_data_table[]=
-{
+static struct mac_model mac_data_table[] = {
/*
* We'll pretend to be a Macintosh II, that's pretty safe.
*/
if (!model) {
/* no bootinfo model id -> NetBSD booter was used! */
/* XXX FIXME: breaks for model > 31 */
- model=(mac_bi_data.cpuid>>2)&63;
- printk (KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
+ model = (mac_bi_data.cpuid >> 2) & 63;
+ printk(KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
}
macintosh_config = mac_data_table;
- for (m = macintosh_config ; m->ident != -1 ; m++) {
+ for (m = macintosh_config; m->ident != -1; m++) {
if (m->ident == model) {
macintosh_config = m;
break;
iop_preinit();
mac_debug_init();
- printk (KERN_INFO "Detected Macintosh model: %d \n", model);
+ printk(KERN_INFO "Detected Macintosh model: %d \n", model);
/*
* Report booter data:
*/
- printk (KERN_DEBUG " Penguin bootinfo data:\n");
- printk (KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
+ printk(KERN_DEBUG " Penguin bootinfo data:\n");
+ printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
mac_bi_data.videoaddr, mac_bi_data.videorow,
mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
mac_bi_data.dimensions >> 16);
- printk (KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+ printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
mac_bi_data.videological, mac_orig_videoaddr,
mac_bi_data.sccbase);
- printk (KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+ printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
mac_bi_data.boottime, mac_bi_data.gmtbias);
- printk (KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+ printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
#if 0
- printk ("Ramdisk: addr 0x%lx size 0x%lx\n",
+ printk("Ramdisk: addr 0x%lx size 0x%lx\n",
m68k_ramdisk.addr, m68k_ramdisk.size);
#endif
*/
switch (macintosh_config->scsi_type) {
case MAC_SCSI_OLD:
- MACHW_SET(MAC_SCSI_80);
- break;
+ MACHW_SET(MAC_SCSI_80);
+ break;
case MAC_SCSI_QUADRA:
case MAC_SCSI_QUADRA2:
case MAC_SCSI_QUADRA3:
- MACHW_SET(MAC_SCSI_96);
- if ((macintosh_config->ident == MAC_MODEL_Q900) ||
- (macintosh_config->ident == MAC_MODEL_Q950))
- MACHW_SET(MAC_SCSI_96_2);
- break;
+ MACHW_SET(MAC_SCSI_96);
+ if ((macintosh_config->ident == MAC_MODEL_Q900) ||
+ (macintosh_config->ident == MAC_MODEL_Q950))
+ MACHW_SET(MAC_SCSI_96_2);
+ break;
default:
- printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
- MACHW_SET(MAC_SCSI_80);
- break;
-
+ printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
+ MACHW_SET(MAC_SCSI_80);
+ break;
}
+
iop_init();
via_init();
oss_init();
static void mac_get_model(char *str)
{
- strcpy(str,"Macintosh ");
+ strcpy(str, "Macintosh ");
strcat(str, macintosh_config->name);
}
*/
#ifdef DEBUG_SCREEN
-static int peng=0, line=0;
+static int peng, line;
#endif
void mac_debugging_short(int pos, short num)
}
/* calculate current offset */
- pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
- +80*peng;
+ pengoffset = (unsigned char *)mac_videobase +
+ (150+line*2) * mac_rowbytes) + 80 * peng;
- pptr=pengoffset;
+ pptr = pengoffset;
- for(i=0;i<8*sizeof(short);i++) /* # of bits */
- {
+ for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */
/* value mask for bit i, reverse order */
- *pptr++ = (num & ( 1 << (8*sizeof(short)-i-1) ) ? 0xFF : 0x00);
+ *pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00);
}
peng++;
pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
+80*peng;
- pptr=pengoffset;
+ pptr = pengoffset;
- for(i=0;i<8*sizeof(long);i++) /* # of bits */
- {
- *pptr++ = (addr & ( 1 << (8*sizeof(long)-i-1) ) ? 0xFF : 0x00);
+ for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */
+ *pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00);
}
peng++;
* TODO: serial debug code
*/
-struct mac_SCC
- {
- u_char cha_b_ctrl;
- u_char char_dummy1;
- u_char cha_a_ctrl;
- u_char char_dummy2;
- u_char cha_b_data;
- u_char char_dummy3;
- u_char cha_a_data;
- };
+struct mac_SCC {
+ u_char cha_b_ctrl;
+ u_char char_dummy1;
+ u_char cha_a_ctrl;
+ u_char char_dummy2;
+ u_char cha_b_data;
+ u_char char_dummy3;
+ u_char cha_a_data;
+};
# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
static int scc_port = -1;
static struct console mac_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
/*
* this driver if Mac.
*/
-void mac_debug_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_debug_console_write(struct console *co, const char *str,
+ unsigned int count)
{
mac_serial_print(str);
}
#define uSEC 1
-static inline void mac_sccb_out (char c)
+static inline void mac_sccb_out(char c)
{
- int i;
- do {
- for( i = uSEC; i > 0; --i )
+ int i;
+
+ do {
+ for (i = uSEC; i > 0; --i)
+ barrier();
+ } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+ for (i = uSEC; i > 0; --i)
barrier();
- } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
- for( i = uSEC; i > 0; --i )
- barrier();
- scc.cha_b_data = c;
+ scc.cha_b_data = c;
}
-static inline void mac_scca_out (char c)
+static inline void mac_scca_out(char c)
{
- int i;
- do {
- for( i = uSEC; i > 0; --i )
+ int i;
+
+ do {
+ for (i = uSEC; i > 0; --i)
+ barrier();
+ } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
+ for (i = uSEC; i > 0; --i)
barrier();
- } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
- for( i = uSEC; i > 0; --i )
- barrier();
- scc.cha_a_data = c;
+ scc.cha_a_data = c;
}
-void mac_sccb_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_sccb_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- mac_sccb_out( '\r' );
- mac_sccb_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ mac_sccb_out('\r');
+ mac_sccb_out(*str++);
+ }
}
-void mac_scca_console_write (struct console *co, const char *str,
- unsigned int count)
+void mac_scca_console_write(struct console *co, const char *str,
+ unsigned int count)
{
- while (count--) {
- if (*str == '\n')
- mac_scca_out( '\r' );
- mac_scca_out( *str++ );
- }
+ while (count--) {
+ if (*str == '\n')
+ mac_scca_out('\r');
+ mac_scca_out(*str++);
+ }
}
* SCC serial ports. They're used by the debugging interface, kgdb, and the
* serial console code. */
#define SCCB_WRITE(reg,val) \
- do { \
- int i; \
- scc.cha_b_ctrl = (reg); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- scc.cha_b_ctrl = (val); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+ do { \
+ int i; \
+ scc.cha_b_ctrl = (reg); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ scc.cha_b_ctrl = (val); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
#define SCCA_WRITE(reg,val) \
- do { \
- int i; \
- scc.cha_a_ctrl = (reg); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- scc.cha_a_ctrl = (val); \
- for( i = uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+ do { \
+ int i; \
+ scc.cha_a_ctrl = (reg); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ scc.cha_a_ctrl = (val); \
+ for (i = uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
* delay of ~ 60us. */
/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
-#define LONG_DELAY() \
- do { \
- int i; \
- for( i = 60*uSEC; i > 0; --i ) \
- barrier(); \
- } while(0)
+#define LONG_DELAY() \
+ do { \
+ int i; \
+ for (i = 60*uSEC; i > 0; --i) \
+ barrier(); \
+ } while(0)
#ifndef CONFIG_SERIAL_CONSOLE
-static void __init mac_init_scc_port( int cflag, int port )
+static void __init mac_init_scc_port(int cflag, int port)
#else
-void mac_init_scc_port( int cflag, int port )
+void mac_init_scc_port(int cflag, int port)
#endif
{
extern int mac_SCC_reset_done;
/* reg12 (BRG low) */
{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
- int baud = cflag & CBAUD;
- int clksrc, clkmode, div, reg3, reg5;
-
- if (cflag & CBAUDEX)
- baud += B38400;
- if (baud < B1200 || baud > B38400+2)
- baud = B9600; /* use default 9600bps for non-implemented rates */
- baud -= B1200; /* tables starts at 1200bps */
-
- clksrc = clksrc_table[baud];
- clkmode = clkmode_table[baud];
- div = div_table[baud];
-
- reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
- reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
-
- if (port == 1) {
- (void)scc.cha_b_ctrl; /* reset reg pointer */
- SCCB_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCB_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
- 0x04 /* 1 stopbit */ |
- clkmode );
- SCCB_WRITE( 3, reg3 );
- SCCB_WRITE( 5, reg5 );
- SCCB_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCB_WRITE( 10, 0 ); /* NRZ mode */
- SCCB_WRITE( 11, clksrc ); /* main clock source */
- SCCB_WRITE( 12, div ); /* BRG value */
- SCCB_WRITE( 13, 0 ); /* BRG high byte */
- SCCB_WRITE( 14, 1 );
- SCCB_WRITE( 3, reg3 | 1 );
- SCCB_WRITE( 5, reg5 | 8 );
- } else if (port == 0) {
- (void)scc.cha_a_ctrl; /* reset reg pointer */
- SCCA_WRITE( 9, 0xc0 ); /* reset */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCA_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+ int baud = cflag & CBAUD;
+ int clksrc, clkmode, div, reg3, reg5;
+
+ if (cflag & CBAUDEX)
+ baud += B38400;
+ if (baud < B1200 || baud > B38400+2)
+ baud = B9600; /* use default 9600bps for non-implemented rates */
+ baud -= B1200; /* tables starts at 1200bps */
+
+ clksrc = clksrc_table[baud];
+ clkmode = clkmode_table[baud];
+ div = div_table[baud];
+
+ reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
+ reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
+
+ if (port == 1) {
+ (void)scc.cha_b_ctrl; /* reset reg pointer */
+ SCCB_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+ 0x04 /* 1 stopbit */ |
+ clkmode);
+ SCCB_WRITE(3, reg3);
+ SCCB_WRITE(5, reg5);
+ SCCB_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCB_WRITE(10, 0); /* NRZ mode */
+ SCCB_WRITE(11, clksrc); /* main clock source */
+ SCCB_WRITE(12, div); /* BRG value */
+ SCCB_WRITE(13, 0); /* BRG high byte */
+ SCCB_WRITE(14, 1);
+ SCCB_WRITE(3, reg3 | 1);
+ SCCB_WRITE(5, reg5 | 8);
+ } else if (port == 0) {
+ (void)scc.cha_a_ctrl; /* reset reg pointer */
+ SCCA_WRITE(9, 0xc0); /* reset */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
0x04 /* 1 stopbit */ |
- clkmode );
- SCCA_WRITE( 3, reg3 );
- SCCA_WRITE( 5, reg5 );
- SCCA_WRITE( 9, 0 ); /* no interrupts */
- LONG_DELAY(); /* extra delay after WR9 access */
- SCCA_WRITE( 10, 0 ); /* NRZ mode */
- SCCA_WRITE( 11, clksrc ); /* main clock source */
- SCCA_WRITE( 12, div ); /* BRG value */
- SCCA_WRITE( 13, 0 ); /* BRG high byte */
- SCCA_WRITE( 14, 1 );
- SCCA_WRITE( 3, reg3 | 1 );
- SCCA_WRITE( 5, reg5 | 8 );
- }
-
- mac_SCC_reset_done = 1;
- mac_SCC_init_done = 1;
+ clkmode);
+ SCCA_WRITE(3, reg3);
+ SCCA_WRITE(5, reg5);
+ SCCA_WRITE(9, 0); /* no interrupts */
+ LONG_DELAY(); /* extra delay after WR9 access */
+ SCCA_WRITE(10, 0); /* NRZ mode */
+ SCCA_WRITE(11, clksrc); /* main clock source */
+ SCCA_WRITE(12, div); /* BRG value */
+ SCCA_WRITE(13, 0); /* BRG high byte */
+ SCCA_WRITE(14, 1);
+ SCCA_WRITE(3, reg3 | 1);
+ SCCA_WRITE(5, reg5 | 8);
+ }
+
+ mac_SCC_reset_done = 1;
+ mac_SCC_init_done = 1;
}
#endif /* DEBUG_SERIAL */
-void mac_init_scca_port( int cflag )
+void mac_init_scca_port(int cflag)
{
mac_init_scc_port(cflag, 0);
}
-void mac_init_sccb_port( int cflag )
+void mac_init_sccb_port(int cflag)
{
mac_init_scc_port(cflag, 1);
}
void __init mac_debug_init(void)
{
#ifdef DEBUG_SERIAL
- if ( !strcmp( m68k_debug_device, "ser" )
- || !strcmp( m68k_debug_device, "ser1" )) {
- /* Mac modem port */
- mac_init_scc_port( B9600|CS8, 0 );
- mac_console_driver.write = mac_scca_console_write;
- scc_port = 0;
- }
- else if (!strcmp( m68k_debug_device, "ser2" )) {
- /* Mac printer port */
- mac_init_scc_port( B9600|CS8, 1 );
- mac_console_driver.write = mac_sccb_console_write;
- scc_port = 1;
- }
+ if (!strcmp(m68k_debug_device, "ser") ||
+ !strcmp(m68k_debug_device, "ser1")) {
+ /* Mac modem port */
+ mac_init_scc_port(B9600|CS8, 0);
+ mac_console_driver.write = mac_scca_console_write;
+ scc_port = 0;
+ } else if (!strcmp(m68k_debug_device, "ser2")) {
+ /* Mac printer port */
+ mac_init_scc_port(B9600|CS8, 1);
+ mac_console_driver.write = mac_sccb_console_write;
+ scc_port = 1;
+ }
#endif
#ifdef DEBUG_HEADS
- if ( !strcmp( m68k_debug_device, "scn" )
- || !strcmp( m68k_debug_device, "con" )) {
- /* display, using head.S console routines */
- mac_console_driver.write = mac_debug_console_write;
- }
+ if (!strcmp(m68k_debug_device, "scn") ||
+ !strcmp(m68k_debug_device, "con")) {
+ /* display, using head.S console routines */
+ mac_console_driver.write = mac_debug_console_write;
+ }
#endif
- if (mac_console_driver.write)
- register_console(&mac_console_driver);
+ if (mac_console_driver.write)
+ register_console(&mac_console_driver);
}
-
-/*
- * Local variables:
- * c-indent-level: 4
- * tab-width: 8
- * End:
- */
#include <asm/machdep.h>
#include <asm/q40_master.h>
-extern irqreturn_t q40_process_int (int level, struct pt_regs *regs);
-extern void q40_init_IRQ (void);
+extern irqreturn_t q40_process_int(int level, struct pt_regs *regs);
+extern void q40_init_IRQ(void);
static void q40_get_model(char *model);
static int q40_get_hardware_list(char *buffer);
extern void q40_sched_init(irq_handler_t handler);
-extern unsigned long q40_gettimeoffset (void);
-extern int q40_hwclk (int, struct rtc_time *);
-extern unsigned int q40_get_ss (void);
-extern int q40_set_clock_mmss (unsigned long);
+extern unsigned long q40_gettimeoffset(void);
+extern int q40_hwclk(int, struct rtc_time *);
+extern unsigned int q40_get_ss(void);
+extern int q40_set_clock_mmss(unsigned long);
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset (void);
+extern void q40_reset(void);
void q40_halt(void);
extern void q40_waitbut(void);
-void q40_set_vectors (void);
+void q40_set_vectors(void);
-extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
+extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/);
extern char m68k_debug_device[];
static void q40_mem_console_write(struct console *co, const char *b,
- unsigned int count);
+ unsigned int count);
extern int ql_ticks;
static struct console q40_console_driver = {
- .name = "debug",
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
static void q40_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
- char *p=(char *)s;
-
- if (count<_cpleft)
- while (count-- >0){
- *q40_mem_cptr=*p++;
- q40_mem_cptr+=4;
- _cpleft--;
- }
+ const char *p = s;
+
+ if (count < _cpleft) {
+ while (count-- > 0) {
+ *q40_mem_cptr = *p++;
+ q40_mem_cptr += 4;
+ _cpleft--;
+ }
+ }
}
+
#if 0
void printq40(char *str)
{
- int l=strlen(str);
- char *p=q40_mem_cptr;
-
- while (l-- >0 && _cpleft-- >0)
- {
- *p=*str++;
- p+=4;
- }
- q40_mem_cptr=p;
+ int l = strlen(str);
+ char *p = q40_mem_cptr;
+
+ while (l-- > 0 && _cpleft-- > 0) {
+ *p = *str++;
+ p += 4;
+ }
+ q40_mem_cptr = p;
}
#endif
-static int halted=0;
+static int halted;
#ifdef CONFIG_HEARTBEAT
static void q40_heartbeat(int on)
{
- if (halted) return;
+ if (halted)
+ return;
- if (on)
- Q40_LED_ON();
- else
- Q40_LED_OFF();
+ if (on)
+ Q40_LED_ON();
+ else
+ Q40_LED_OFF();
}
#endif
void q40_reset(void)
{
- halted=1;
- printk ("\n\n*******************************************\n"
+ halted = 1;
+ printk("\n\n*******************************************\n"
"Called q40_reset : press the RESET button!! \n"
"*******************************************\n");
Q40_LED_ON();
- while(1) ;
+ while (1)
+ ;
}
void q40_halt(void)
{
- halted=1;
- printk ("\n\n*******************\n"
- " Called q40_halt\n"
- "*******************\n");
+ halted = 1;
+ printk("\n\n*******************\n"
+ " Called q40_halt\n"
+ "*******************\n");
Q40_LED_ON();
- while(1) ;
+ while (1)
+ ;
}
static void q40_get_model(char *model)
{
- sprintf(model, "Q40");
+ sprintf(model, "Q40");
}
/* No hardware options on Q40? */
static int q40_get_hardware_list(char *buffer)
{
- *buffer = '\0';
- return 0;
+ *buffer = '\0';
+ return 0;
}
-static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0};
+static unsigned int serports[] =
+{
+ 0x3f8,0x2f8,0x3e8,0x2e8,0
+};
void q40_disable_irqs(void)
{
- unsigned i,j;
+ unsigned i, j;
- j=0;
- while((i=serports[j++])) outb(0,i+UART_IER);
- master_outb(0,EXT_ENABLE_REG);
- master_outb(0,KEY_IRQ_ENABLE_REG);
+ j = 0;
+ while ((i = serports[j++]))
+ outb(0, i + UART_IER);
+ master_outb(0, EXT_ENABLE_REG);
+ master_outb(0, KEY_IRQ_ENABLE_REG);
}
void __init config_q40(void)
{
- mach_sched_init = q40_sched_init;
+ mach_sched_init = q40_sched_init;
- mach_init_IRQ = q40_init_IRQ;
- mach_gettimeoffset = q40_gettimeoffset;
- mach_hwclk = q40_hwclk;
- mach_get_ss = q40_get_ss;
- mach_get_rtc_pll = q40_get_rtc_pll;
- mach_set_rtc_pll = q40_set_rtc_pll;
- mach_set_clock_mmss = q40_set_clock_mmss;
+ mach_init_IRQ = q40_init_IRQ;
+ mach_gettimeoffset = q40_gettimeoffset;
+ mach_hwclk = q40_hwclk;
+ mach_get_ss = q40_get_ss;
+ mach_get_rtc_pll = q40_get_rtc_pll;
+ mach_set_rtc_pll = q40_set_rtc_pll;
+ mach_set_clock_mmss = q40_set_clock_mmss;
- mach_reset = q40_reset;
- mach_get_model = q40_get_model;
- mach_get_hardware_list = q40_get_hardware_list;
+ mach_reset = q40_reset;
+ mach_get_model = q40_get_model;
+ mach_get_hardware_list = q40_get_hardware_list;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
- mach_beep = q40_mksound;
+ mach_beep = q40_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
- mach_heartbeat = q40_heartbeat;
+ mach_heartbeat = q40_heartbeat;
#endif
- mach_halt = q40_halt;
-
- /* disable a few things that SMSQ might have left enabled */
- q40_disable_irqs();
-
- /* no DMA at all, but ide-scsi requires it.. make sure
- * all physical RAM fits into the boundary - otherwise
- * allocator may play costly and useless tricks */
- mach_max_dma_address = 1024*1024*1024;
-
- /* useful for early debugging stages - writes kernel messages into SRAM */
- if (!strncmp( m68k_debug_device,"mem",3 ))
- {
- /*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
- _cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
- q40_console_driver.write = q40_mem_console_write;
- register_console(&q40_console_driver);
- }
+ mach_halt = q40_halt;
+
+ /* disable a few things that SMSQ might have left enabled */
+ q40_disable_irqs();
+
+ /* no DMA at all, but ide-scsi requires it.. make sure
+ * all physical RAM fits into the boundary - otherwise
+ * allocator may play costly and useless tricks */
+ mach_max_dma_address = 1024*1024*1024;
+
+ /* useful for early debugging stages - writes kernel messages into SRAM */
+ if (!strncmp( m68k_debug_device,"mem", 3)) {
+ /*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
+ _cpleft = 2000 - ((long)q40_mem_cptr-0xff020000) / 4;
+ q40_console_driver.write = q40_mem_console_write;
+ register_console(&q40_console_driver);
+ }
}
int q40_parse_bootinfo(const struct bi_record *rec)
{
- return 1;
+ return 1;
}
-static inline unsigned char bcd2bin (unsigned char b)
+static inline unsigned char bcd2bin(unsigned char b)
{
- return ((b>>4)*10 + (b&15));
+ return (b >> 4) * 10 + (b & 15);
}
-static inline unsigned char bin2bcd (unsigned char b)
+static inline unsigned char bin2bcd(unsigned char b)
{
- return (((b/10)*16) + (b%10));
+ return (b / 10) * 16 + (b % 10);
}
-unsigned long q40_gettimeoffset (void)
+unsigned long q40_gettimeoffset(void)
{
- return 5000*(ql_ticks!=0);
+ return 5000 * (ql_ticks != 0);
}
int q40_hwclk(int op, struct rtc_time *t)
{
- if (op)
- { /* Write.... */
- Q40_RTC_CTRL |= Q40_RTC_WRITE;
+ if (op) {
+ /* Write.... */
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_SECS = bin2bcd(t->tm_sec);
Q40_RTC_MINS = bin2bcd(t->tm_min);
if (t->tm_wday >= 0)
Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
- Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
- }
- else
- { /* Read.... */
- Q40_RTC_CTRL |= Q40_RTC_READ;
-
- t->tm_year = bcd2bin (Q40_RTC_YEAR);
- t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
- t->tm_mday = bcd2bin (Q40_RTC_DATE);
- t->tm_hour = bcd2bin (Q40_RTC_HOUR);
- t->tm_min = bcd2bin (Q40_RTC_MINS);
- t->tm_sec = bcd2bin (Q40_RTC_SECS);
-
- Q40_RTC_CTRL &= ~(Q40_RTC_READ);
-
- if (t->tm_year < 70)
- t->tm_year += 100;
- t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
-
+ Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+ } else {
+ /* Read.... */
+ Q40_RTC_CTRL |= Q40_RTC_READ;
+
+ t->tm_year = bcd2bin (Q40_RTC_YEAR);
+ t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
+ t->tm_mday = bcd2bin (Q40_RTC_DATE);
+ t->tm_hour = bcd2bin (Q40_RTC_HOUR);
+ t->tm_min = bcd2bin (Q40_RTC_MINS);
+ t->tm_sec = bcd2bin (Q40_RTC_SECS);
+
+ Q40_RTC_CTRL &= ~(Q40_RTC_READ);
+
+ if (t->tm_year < 70)
+ t->tm_year += 100;
+ t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
}
return 0;
* clock is out by > 30 minutes. Logic lifted from atari code.
*/
-int q40_set_clock_mmss (unsigned long nowtime)
+int q40_set_clock_mmss(unsigned long nowtime)
{
int retval = 0;
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
int rtc_minutes;
+ rtc_minutes = bcd2bin(Q40_RTC_MINS);
- rtc_minutes = bcd2bin (Q40_RTC_MINS);
-
- if ((rtc_minutes < real_minutes
- ? real_minutes - rtc_minutes
- : rtc_minutes - real_minutes) < 30)
- {
- Q40_RTC_CTRL |= Q40_RTC_WRITE;
+ if ((rtc_minutes < real_minutes ?
+ real_minutes - rtc_minutes :
+ rtc_minutes - real_minutes) < 30) {
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
Q40_RTC_MINS = bin2bcd(real_minutes);
Q40_RTC_SECS = bin2bcd(real_seconds);
Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
- }
- else
+ } else
retval = -1;
-
return retval;
}
static int q40_get_rtc_pll(struct rtc_pll_info *pll)
{
- int tmp=Q40_RTC_CTRL;
+ int tmp = Q40_RTC_CTRL;
+
pll->pll_value = tmp & Q40_RTC_PLL_MASK;
if (tmp & Q40_RTC_PLL_SIGN)
pll->pll_value = -pll->pll_value;
- pll->pll_max=31;
- pll->pll_min=-31;
- pll->pll_posmult=512;
- pll->pll_negmult=256;
- pll->pll_clock=125829120;
+ pll->pll_max = 31;
+ pll->pll_min = -31;
+ pll->pll_posmult = 512;
+ pll->pll_negmult = 256;
+ pll->pll_clock = 125829120;
+
return 0;
}
static int q40_set_rtc_pll(struct rtc_pll_info *pll)
{
- if (!pll->pll_ctrl){
+ if (!pll->pll_ctrl) {
/* the docs are a bit unclear so I am doublesetting */
/* RTC_WRITE here ... */
int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
/* Handle returning to the prom */
void sun3x_halt(void)
{
- unsigned long flags;
+ unsigned long flags;
- /* Disable interrupts while we mess with things */
- local_irq_save(flags);
+ /* Disable interrupts while we mess with things */
+ local_irq_save(flags);
- /* Restore prom vbr */
- __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
+ /* Restore prom vbr */
+ asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
- /* Restore prom NMI clock */
-// sun3x_disable_intreg(5);
- sun3_enable_irq(7);
+ /* Restore prom NMI clock */
+// sun3x_disable_intreg(5);
+ sun3_enable_irq(7);
- /* Let 'er rip */
- __asm__ volatile ("trap #14" : : );
+ /* Let 'er rip */
+ asm volatile ("trap #14");
- /* Restore everything */
- sun3_disable_irq(7);
- sun3_enable_irq(5);
+ /* Restore everything */
+ sun3_disable_irq(7);
+ sun3_enable_irq(5);
- __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
- local_irq_restore(flags);
+ asm volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
+ local_irq_restore(flags);
}
void sun3x_reboot(void)
{
- /* This never returns, don't bother saving things */
- local_irq_disable();
+ /* This never returns, don't bother saving things */
+ local_irq_disable();
- /* Restore prom vbr */
- __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
+ /* Restore prom vbr */
+ asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
- /* Restore prom NMI clock */
- sun3_disable_irq(5);
- sun3_enable_irq(7);
+ /* Restore prom NMI clock */
+ sun3_disable_irq(5);
+ sun3_enable_irq(7);
- /* Let 'er rip */
- (*romvec->pv_reboot)("vmlinux");
+ /* Let 'er rip */
+ (*romvec->pv_reboot)("vmlinux");
}
extern char m68k_debug_device[];
static void sun3x_prom_write(struct console *co, const char *s,
unsigned int count)
{
- while (count--) {
- if (*s == '\n')
- sun3x_putchar('\r');
- sun3x_putchar(*s++);
- }
+ while (count--) {
+ if (*s == '\n')
+ sun3x_putchar('\r');
+ sun3x_putchar(*s++);
+ }
}
/* debug console - write-only */
static struct console sun3x_debug = {
- .name = "debug",
- .write = sun3x_prom_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
+ .name = "debug",
+ .write = sun3x_prom_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
void sun3x_prom_init(void)
{
- /* Read the vector table */
-
- sun3x_putchar = *(void (**)(int)) (SUN3X_P_PUTCHAR);
- sun3x_getchar = *(int (**)(void)) (SUN3X_P_GETCHAR);
- sun3x_mayget = *(int (**)(void)) (SUN3X_P_MAYGET);
- sun3x_mayput = *(int (**)(int)) (SUN3X_P_MAYPUT);
- sun3x_prom_reboot = *(void (**)(void)) (SUN3X_P_REBOOT);
- sun3x_prom_abort = *(e_vector *) (SUN3X_P_ABORT);
- romvec = (struct linux_romvec *)SUN3X_PROM_BASE;
-
- idprom_init();
-
- if(!((idprom->id_machtype & SM_ARCH_MASK) == SM_SUN3X)) {
- printk("Warning: machine reports strange type %02x\n",
- idprom->id_machtype);
- printk("Pretending it's a 3/80, but very afraid...\n");
- idprom->id_machtype = SM_SUN3X | SM_3_80;
- }
-
- /* point trap #14 at abort.
- * XXX this is futile since we restore the vbr first - oops
- */
- vectors[VEC_TRAP14] = sun3x_prom_abort;
-
- /* If debug=prom was specified, start the debug console */
-
- if (!strcmp(m68k_debug_device, "prom"))
- register_console(&sun3x_debug);
-
-
+ /* Read the vector table */
+
+ sun3x_putchar = *(void (**)(int)) (SUN3X_P_PUTCHAR);
+ sun3x_getchar = *(int (**)(void)) (SUN3X_P_GETCHAR);
+ sun3x_mayget = *(int (**)(void)) (SUN3X_P_MAYGET);
+ sun3x_mayput = *(int (**)(int)) (SUN3X_P_MAYPUT);
+ sun3x_prom_reboot = *(void (**)(void)) (SUN3X_P_REBOOT);
+ sun3x_prom_abort = *(e_vector *) (SUN3X_P_ABORT);
+ romvec = (struct linux_romvec *)SUN3X_PROM_BASE;
+
+ idprom_init();
+
+ if (!((idprom->id_machtype & SM_ARCH_MASK) == SM_SUN3X)) {
+ printk("Warning: machine reports strange type %02x\n",
+ idprom->id_machtype);
+ printk("Pretending it's a 3/80, but very afraid...\n");
+ idprom->id_machtype = SM_SUN3X | SM_3_80;
+ }
+
+ /* point trap #14 at abort.
+ * XXX this is futile since we restore the vbr first - oops
+ */
+ vectors[VEC_TRAP14] = sun3x_prom_abort;
+
+ /* If debug=prom was specified, start the debug console */
+
+ if (!strcmp(m68k_debug_device, "prom"))
+ register_console(&sun3x_debug);
}
/* some prom functions to export */
void prom_printf(char *fmt, ...)
{
-
}
void prom_halt (void)
int i;
/* make a copy of the idprom structure */
- for(i = 0; i < num_bytes; i++)
+ for (i = 0; i < num_bytes; i++)
idbuf[i] = ((char *)SUN3X_IDPROM)[i];
return idbuf[0];
projects / openwrt / staging / blogic.git / commitdiff