* 02110-1301 USA
*/
-244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244,
+{ 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244,
248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250,
247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248,
244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244,
247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248,
244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244,
248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250,
-247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248,
- 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4,
+247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248 },
+{ 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4,
0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0,
12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0,
0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4,
12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0,
0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4,
0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0,
- 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0,
- 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0,
+ 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0 },
+{ 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0,
0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12,
0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0,
4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0,
0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0,
4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0,
0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12,
- 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0,
-244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244,
+ 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0 },
+{ 244,12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244,
248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247,
250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248,
244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244,
250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248,
244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244,
248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247,
-250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248
+250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 },
* CFA Filter Coefficient Table
*
*/
-static u32 cfa_coef_table[] = {
+static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = {
#include "cfa_coef_table.h"
};
}
/*
- * preview_config_cfa - Configure CFA Interpolation
- */
-static void
-preview_config_cfa(struct isp_prev_device *prev,
- const struct prev_params *params)
-{
- struct isp_device *isp = to_isp_device(prev);
+ * preview_config_cfa - Configure CFA Interpolation for Bayer formats
+ *
+ * The CFA table is organised in four blocks, one per Bayer component. The
+ * hardware expects blocks to follow the Bayer order of the input data, while
+ * the driver stores the table in GRBG order in memory. The blocks need to be
+ * reordered to support non-GRBG Bayer patterns.
+ */
+static void preview_config_cfa(struct isp_prev_device *prev,
+ const struct prev_params *params)
+{
+ static const unsigned int cfa_coef_order[4][4] = {
+ { 0, 1, 2, 3 }, /* GRBG */
+ { 1, 0, 3, 2 }, /* RGGB */
+ { 2, 3, 0, 1 }, /* BGGR */
+ { 3, 2, 1, 0 }, /* GBRG */
+ };
+ const unsigned int *order = cfa_coef_order[prev->params.cfa_order];
const struct omap3isp_prev_cfa *cfa = ¶ms->cfa;
+ struct isp_device *isp = to_isp_device(prev);
unsigned int i;
-
- isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_CFAFMT_MASK,
- cfa->format << ISPPRV_PCR_CFAFMT_SHIFT);
+ unsigned int j;
isp_reg_writel(isp,
(cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
- for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) {
- isp_reg_writel(isp, cfa->table[i],
- OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+ for (i = 0; i < 4; ++i) {
+ const __u32 *block = cfa->table[order[i]];
+
+ for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j)
+ isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_SET_TBL_DATA);
}
}
static void preview_config_averager(struct isp_prev_device *prev, u8 average)
{
struct isp_device *isp = to_isp_device(prev);
- struct prev_params *params;
- int reg = 0;
-
- params = (prev->params.active & OMAP3ISP_PREV_CFA)
- ? &prev->params.params[0] : &prev->params.params[1];
- if (params->cfa.format == OMAP3ISP_CFAFMT_BAYER)
- reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
- ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
- average;
- else if (params->cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON)
- reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT |
- ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT |
- average;
- isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
+ isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
+ ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
+ average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
}
+
/*
* preview_config_input_format - Configure the input format
* @prev: The preview engine
* @format: Format on the preview engine sink pad
*
- * Enable CFA interpolation for Bayer formats and disable it for greyscale
- * formats.
+ * Enable and configure CFA interpolation for Bayer formats and disable it for
+ * greyscale formats.
+ *
+ * The CFA table is organised in four blocks, one per Bayer component. The
+ * hardware expects blocks to follow the Bayer order of the input data, while
+ * the driver stores the table in GRBG order in memory. The blocks need to be
+ * reordered to support non-GRBG Bayer patterns.
*/
static void preview_config_input_format(struct isp_prev_device *prev,
const struct v4l2_mbus_framefmt *format)
{
struct isp_device *isp = to_isp_device(prev);
+ struct prev_params *params;
- if (format->code != V4L2_MBUS_FMT_Y10_1X10)
- isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_CFAEN);
- else
+ switch (format->code) {
+ case V4L2_MBUS_FMT_SGRBG10_1X10:
+ prev->params.cfa_order = 0;
+ break;
+ case V4L2_MBUS_FMT_SRGGB10_1X10:
+ prev->params.cfa_order = 1;
+ break;
+ case V4L2_MBUS_FMT_SBGGR10_1X10:
+ prev->params.cfa_order = 2;
+ break;
+ case V4L2_MBUS_FMT_SGBRG10_1X10:
+ prev->params.cfa_order = 3;
+ break;
+ default:
+ /* Disable CFA for non-Bayer formats. */
isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
ISPPRV_PCR_CFAEN);
+ return;
+ }
+
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN);
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER);
+
+ params = (prev->params.active & OMAP3ISP_PREV_CFA)
+ ? &prev->params.params[0] : &prev->params.params[1];
+
+ preview_config_cfa(prev, params);
}
/*
active = prev->params.active;
spin_unlock_irqrestore(&prev->params.lock, flags);
- preview_setup_hw(prev, update, active);
-
- if (prev->output & PREVIEW_OUTPUT_MEMORY)
- isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_SDRPORT);
- else
- isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_SDRPORT);
-
- if (prev->output & PREVIEW_OUTPUT_RESIZER)
- isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_RSZPORT);
- else
- isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
- ISPPRV_PCR_RSZPORT);
-
/* PREV_PAD_SINK */
format = &prev->formats[PREV_PAD_SINK];
preview_config_inlineoffset(prev,
ALIGN(format->width, 0x20) * 2);
+ preview_setup_hw(prev, update, active);
+
/* PREV_PAD_SOURCE */
format = &prev->formats[PREV_PAD_SOURCE];
+ if (prev->output & PREVIEW_OUTPUT_MEMORY)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SDRPORT);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SDRPORT);
+
+ if (prev->output & PREVIEW_OUTPUT_RESIZER)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_RSZPORT);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_RSZPORT);
+
if (prev->output & PREVIEW_OUTPUT_MEMORY)
preview_config_outlineoffset(prev,
ALIGN(format->width, 0x10) * 2);