regulator/lp3971: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 4f33a0f4a179669b1619991f0cb655f85193373b..3ea639f29e95a2d8abbf9e37fa44d0672c3e8fc3 100644 (file)
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -54,7 +54,7 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
 #define LP3971_BUCK2_BASE 0x29
 #define LP3971_BUCK3_BASE 0x32
 
-const static int buck_base_addr[] = {
+static const int buck_base_addr[] = {
        LP3971_BUCK1_BASE,
        LP3971_BUCK2_BASE,
        LP3971_BUCK3_BASE,
@@ -63,7 +63,7 @@ const static int buck_base_addr[] = {
 #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
 #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
 
-const static int buck_voltage_map[] = {
+static const int buck_voltage_map[] = {
           0,  800,  850,  900,  950, 1000, 1050, 1100,
        1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
        1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
@@ -96,17 +96,17 @@ const static int buck_voltage_map[] = {
 #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
 #define LDO_VOL_CONTR_MASK 0x0f
 
-const static int ldo45_voltage_map[] = {
+static const int ldo45_voltage_map[] = {
        1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
        1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
 };
 
-const static int ldo123_voltage_map[] = {
+static const int ldo123_voltage_map[] = {
        1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
        2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
 };
 
-const static int *ldo_voltage_map[] = {
+static const int *ldo_voltage_map[] = {
        ldo123_voltage_map, /* LDO1 */
        ldo123_voltage_map, /* LDO2 */
        ldo123_voltage_map, /* LDO3 */