It is now time for the ipath driver to begin to be phased out of the kernel.
This patch moves the ipath driver from the Infiniband sub tree to the staging
area where it will remain until the code is removed from the kernel in a few
releases.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
S: Maintained
-F: drivers/infiniband/hw/ipath/
+F: drivers/staging/rdma/ipath/
IPMI SUBSYSTEM
M: Corey Minyard <minyard@acm.org>
default y
source "drivers/infiniband/hw/mthca/Kconfig"
-source "drivers/infiniband/hw/ipath/Kconfig"
source "drivers/infiniband/hw/qib/Kconfig"
source "drivers/infiniband/hw/ehca/Kconfig"
source "drivers/infiniband/hw/amso1100/Kconfig"
obj-$(CONFIG_INFINIBAND_MTHCA) += mthca/
-obj-$(CONFIG_INFINIBAND_IPATH) += ipath/
obj-$(CONFIG_INFINIBAND_QIB) += qib/
obj-$(CONFIG_INFINIBAND_EHCA) += ehca/
obj-$(CONFIG_INFINIBAND_AMSO1100) += amso1100/
+++ /dev/null
-config INFINIBAND_IPATH
- tristate "QLogic HTX HCA support"
- depends on 64BIT && NET && HT_IRQ
- ---help---
- This is a driver for the obsolete QLogic Hyper-Transport
- IB host channel adapter (model QHT7140),
- including InfiniBand verbs support. This driver allows these
- devices to be used with both kernel upper level protocols such
- as IP-over-InfiniBand as well as with userspace applications
- (in conjunction with InfiniBand userspace access).
- For QLogic PCIe QLE based cards, use the QIB driver instead.
-
- If you have this hardware you will need to boot with PAT disabled
- on your x86-64 systems, use the nopat kernel parameter.
+++ /dev/null
-ccflags-y := -DIPATH_IDSTR='"QLogic kernel.org driver"' \
- -DIPATH_KERN_TYPE=0
-
-obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
-
-ib_ipath-y := \
- ipath_cq.o \
- ipath_diag.o \
- ipath_dma.o \
- ipath_driver.o \
- ipath_eeprom.o \
- ipath_file_ops.o \
- ipath_fs.o \
- ipath_init_chip.o \
- ipath_intr.o \
- ipath_keys.o \
- ipath_mad.o \
- ipath_mmap.o \
- ipath_mr.o \
- ipath_qp.o \
- ipath_rc.o \
- ipath_ruc.o \
- ipath_sdma.o \
- ipath_srq.o \
- ipath_stats.o \
- ipath_sysfs.o \
- ipath_uc.o \
- ipath_ud.o \
- ipath_user_pages.o \
- ipath_user_sdma.o \
- ipath_verbs_mcast.o \
- ipath_verbs.o
-
-ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
-
-ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
-ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_COMMON_H
-#define _IPATH_COMMON_H
-
-/*
- * This file contains defines, structures, etc. that are used
- * to communicate between kernel and user code.
- */
-
-
-/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
-#define IPATH_SRC_OUI_1 0x00
-#define IPATH_SRC_OUI_2 0x11
-#define IPATH_SRC_OUI_3 0x75
-
-/* version of protocol header (known to chip also). In the long run,
- * we should be able to generate and accept a range of version numbers;
- * for now we only accept one, and it's compiled in.
- */
-#define IPS_PROTO_VERSION 2
-
-/*
- * These are compile time constants that you may want to enable or disable
- * if you are trying to debug problems with code or performance.
- * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
- * fastpath code
- * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
- * traced in faspath code
- * _IPATH_TRACING define as 0 if you want to remove all tracing in a
- * compilation unit
- * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
- */
-
-/*
- * The value in the BTH QP field that InfiniPath uses to differentiate
- * an infinipath protocol IB packet vs standard IB transport
- */
-#define IPATH_KD_QP 0x656b79
-
-/*
- * valid states passed to ipath_set_linkstate() user call
- */
-#define IPATH_IB_LINKDOWN 0
-#define IPATH_IB_LINKARM 1
-#define IPATH_IB_LINKACTIVE 2
-#define IPATH_IB_LINKDOWN_ONLY 3
-#define IPATH_IB_LINKDOWN_SLEEP 4
-#define IPATH_IB_LINKDOWN_DISABLE 5
-#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
-#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
-#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */
-#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */
-
-/*
- * These 3 values (SDR and DDR may be ORed for auto-speed
- * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
- * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
- * are also the the possible values for ipath_link_speed_enabled and active
- * The values were chosen to match values used within the IB spec.
- */
-#define IPATH_IB_SDR 1
-#define IPATH_IB_DDR 2
-
-/*
- * stats maintained by the driver. For now, at least, this is global
- * to all minor devices.
- */
-struct infinipath_stats {
- /* number of interrupts taken */
- __u64 sps_ints;
- /* number of interrupts for errors */
- __u64 sps_errints;
- /* number of errors from chip (not incl. packet errors or CRC) */
- __u64 sps_errs;
- /* number of packet errors from chip other than CRC */
- __u64 sps_pkterrs;
- /* number of packets with CRC errors (ICRC and VCRC) */
- __u64 sps_crcerrs;
- /* number of hardware errors reported (parity, etc.) */
- __u64 sps_hwerrs;
- /* number of times IB link changed state unexpectedly */
- __u64 sps_iblink;
- __u64 sps_unused; /* was fastrcvint, no longer implemented */
- /* number of kernel (port0) packets received */
- __u64 sps_port0pkts;
- /* number of "ethernet" packets sent by driver */
- __u64 sps_ether_spkts;
- /* number of "ethernet" packets received by driver */
- __u64 sps_ether_rpkts;
- /* number of SMA packets sent by driver. Obsolete. */
- __u64 sps_sma_spkts;
- /* number of SMA packets received by driver. Obsolete. */
- __u64 sps_sma_rpkts;
- /* number of times all ports rcvhdrq was full and packet dropped */
- __u64 sps_hdrqfull;
- /* number of times all ports egrtid was full and packet dropped */
- __u64 sps_etidfull;
- /*
- * number of times we tried to send from driver, but no pio buffers
- * avail
- */
- __u64 sps_nopiobufs;
- /* number of ports currently open */
- __u64 sps_ports;
- /* list of pkeys (other than default) accepted (0 means not set) */
- __u16 sps_pkeys[4];
- __u16 sps_unused16[4]; /* available; maintaining compatible layout */
- /* number of user ports per chip (not IB ports) */
- __u32 sps_nports;
- /* not our interrupt, or already handled */
- __u32 sps_nullintr;
- /* max number of packets handled per receive call */
- __u32 sps_maxpkts_call;
- /* avg number of packets handled per receive call */
- __u32 sps_avgpkts_call;
- /* total number of pages locked */
- __u64 sps_pagelocks;
- /* total number of pages unlocked */
- __u64 sps_pageunlocks;
- /*
- * Number of packets dropped in kernel other than errors (ether
- * packets if ipath not configured, etc.)
- */
- __u64 sps_krdrops;
- __u64 sps_txeparity; /* PIO buffer parity error, recovered */
- /* pad for future growth */
- __u64 __sps_pad[45];
-};
-
-/*
- * These are the status bits readable (in ascii form, 64bit value)
- * from the "status" sysfs file.
- */
-#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
-#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
-/* Device has been disabled via admin request */
-#define IPATH_STATUS_ADMIN_DISABLED 0x4
-/* Chip has been found and initted */
-#define IPATH_STATUS_CHIP_PRESENT 0x20
-/* IB link is at ACTIVE, usable for data traffic */
-#define IPATH_STATUS_IB_READY 0x40
-/* link is configured, LID, MTU, etc. have been set */
-#define IPATH_STATUS_IB_CONF 0x80
-/* no link established, probably no cable */
-#define IPATH_STATUS_IB_NOCABLE 0x100
-/* A Fatal hardware error has occurred. */
-#define IPATH_STATUS_HWERROR 0x200
-
-/*
- * The list of usermode accessible registers. Also see Reg_* later in file.
- */
-typedef enum _ipath_ureg {
- /* (RO) DMA RcvHdr to be used next. */
- ur_rcvhdrtail = 0,
- /* (RW) RcvHdr entry to be processed next by host. */
- ur_rcvhdrhead = 1,
- /* (RO) Index of next Eager index to use. */
- ur_rcvegrindextail = 2,
- /* (RW) Eager TID to be processed next */
- ur_rcvegrindexhead = 3,
- /* For internal use only; max register number. */
- _IPATH_UregMax
-} ipath_ureg;
-
-/* bit values for spi_runtime_flags */
-#define IPATH_RUNTIME_HT 0x1
-#define IPATH_RUNTIME_PCIE 0x2
-#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
-#define IPATH_RUNTIME_RCVHDR_COPY 0x8
-#define IPATH_RUNTIME_MASTER 0x10
-#define IPATH_RUNTIME_NODMA_RTAIL 0x80
-#define IPATH_RUNTIME_SDMA 0x200
-#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400
-#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800
-
-/*
- * This structure is returned by ipath_userinit() immediately after
- * open to get implementation-specific info, and info specific to this
- * instance.
- *
- * This struct must have explict pad fields where type sizes
- * may result in different alignments between 32 and 64 bit
- * programs, since the 64 bit * bit kernel requires the user code
- * to have matching offsets
- */
-struct ipath_base_info {
- /* version of hardware, for feature checking. */
- __u32 spi_hw_version;
- /* version of software, for feature checking. */
- __u32 spi_sw_version;
- /* InfiniPath port assigned, goes into sent packets */
- __u16 spi_port;
- __u16 spi_subport;
- /*
- * IB MTU, packets IB data must be less than this.
- * The MTU is in bytes, and will be a multiple of 4 bytes.
- */
- __u32 spi_mtu;
- /*
- * Size of a PIO buffer. Any given packet's total size must be less
- * than this (in words). Included is the starting control word, so
- * if 513 is returned, then total pkt size is 512 words or less.
- */
- __u32 spi_piosize;
- /* size of the TID cache in infinipath, in entries */
- __u32 spi_tidcnt;
- /* size of the TID Eager list in infinipath, in entries */
- __u32 spi_tidegrcnt;
- /* size of a single receive header queue entry in words. */
- __u32 spi_rcvhdrent_size;
- /*
- * Count of receive header queue entries allocated.
- * This may be less than the spu_rcvhdrcnt passed in!.
- */
- __u32 spi_rcvhdr_cnt;
-
- /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
- __u32 spi_runtime_flags;
-
- /* address where receive buffer queue is mapped into */
- __u64 spi_rcvhdr_base;
-
- /* user program. */
-
- /* base address of eager TID receive buffers. */
- __u64 spi_rcv_egrbufs;
-
- /* Allocated by initialization code, not by protocol. */
-
- /*
- * Size of each TID buffer in host memory, starting at
- * spi_rcv_egrbufs. The buffers are virtually contiguous.
- */
- __u32 spi_rcv_egrbufsize;
- /*
- * The special QP (queue pair) value that identifies an infinipath
- * protocol packet from standard IB packets. More, probably much
- * more, to be added.
- */
- __u32 spi_qpair;
-
- /*
- * User register base for init code, not to be used directly by
- * protocol or applications.
- */
- __u64 __spi_uregbase;
- /*
- * Maximum buffer size in bytes that can be used in a single TID
- * entry (assuming the buffer is aligned to this boundary). This is
- * the minimum of what the hardware and software support Guaranteed
- * to be a power of 2.
- */
- __u32 spi_tid_maxsize;
- /*
- * alignment of each pio send buffer (byte count
- * to add to spi_piobufbase to get to second buffer)
- */
- __u32 spi_pioalign;
- /*
- * The index of the first pio buffer available to this process;
- * needed to do lookup in spi_pioavailaddr; not added to
- * spi_piobufbase.
- */
- __u32 spi_pioindex;
- /* number of buffers mapped for this process */
- __u32 spi_piocnt;
-
- /*
- * Base address of writeonly pio buffers for this process.
- * Each buffer has spi_piosize words, and is aligned on spi_pioalign
- * boundaries. spi_piocnt buffers are mapped from this address
- */
- __u64 spi_piobufbase;
-
- /*
- * Base address of readonly memory copy of the pioavail registers.
- * There are 2 bits for each buffer.
- */
- __u64 spi_pioavailaddr;
-
- /*
- * Address where driver updates a copy of the interface and driver
- * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
- * string indicating hardware error, if there was one.
- */
- __u64 spi_status;
-
- /* number of chip ports available to user processes */
- __u32 spi_nports;
- /* unit number of chip we are using */
- __u32 spi_unit;
- /* num bufs in each contiguous set */
- __u32 spi_rcv_egrperchunk;
- /* size in bytes of each contiguous set */
- __u32 spi_rcv_egrchunksize;
- /* total size of mmap to cover full rcvegrbuffers */
- __u32 spi_rcv_egrbuftotlen;
- __u32 spi_filler_for_align;
- /* address of readonly memory copy of the rcvhdrq tail register. */
- __u64 spi_rcvhdr_tailaddr;
-
- /* shared memory pages for subports if port is shared */
- __u64 spi_subport_uregbase;
- __u64 spi_subport_rcvegrbuf;
- __u64 spi_subport_rcvhdr_base;
-
- /* shared memory page for hardware port if it is shared */
- __u64 spi_port_uregbase;
- __u64 spi_port_rcvegrbuf;
- __u64 spi_port_rcvhdr_base;
- __u64 spi_port_rcvhdr_tailaddr;
-
-} __attribute__ ((aligned(8)));
-
-
-/*
- * This version number is given to the driver by the user code during
- * initialization in the spu_userversion field of ipath_user_info, so
- * the driver can check for compatibility with user code.
- *
- * The major version changes when data structures
- * change in an incompatible way. The driver must be the same or higher
- * for initialization to succeed. In some cases, a higher version
- * driver will not interoperate with older software, and initialization
- * will return an error.
- */
-#define IPATH_USER_SWMAJOR 1
-
-/*
- * Minor version differences are always compatible
- * a within a major version, however if user software is larger
- * than driver software, some new features and/or structure fields
- * may not be implemented; the user code must deal with this if it
- * cares, or it must abort after initialization reports the difference.
- */
-#define IPATH_USER_SWMINOR 6
-
-#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
-
-#define IPATH_KERN_TYPE 0
-
-/*
- * Similarly, this is the kernel version going back to the user. It's
- * slightly different, in that we want to tell if the driver was built as
- * part of a QLogic release, or from the driver from openfabrics.org,
- * kernel.org, or a standard distribution, for support reasons.
- * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
- *
- * It's returned by the driver to the user code during initialization in the
- * spi_sw_version field of ipath_base_info, so the user code can in turn
- * check for compatibility with the kernel.
-*/
-#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
-
-/*
- * This structure is passed to ipath_userinit() to tell the driver where
- * user code buffers are, sizes, etc. The offsets and sizes of the
- * fields must remain unchanged, for binary compatibility. It can
- * be extended, if userversion is changed so user code can tell, if needed
- */
-struct ipath_user_info {
- /*
- * version of user software, to detect compatibility issues.
- * Should be set to IPATH_USER_SWVERSION.
- */
- __u32 spu_userversion;
-
- /* desired number of receive header queue entries */
- __u32 spu_rcvhdrcnt;
-
- /* size of struct base_info to write to */
- __u32 spu_base_info_size;
-
- /*
- * number of words in KD protocol header
- * This tells InfiniPath how many words to copy to rcvhdrq. If 0,
- * kernel uses a default. Once set, attempts to set any other value
- * are an error (EAGAIN) until driver is reloaded.
- */
- __u32 spu_rcvhdrsize;
-
- /*
- * If two or more processes wish to share a port, each process
- * must set the spu_subport_cnt and spu_subport_id to the same
- * values. The only restriction on the spu_subport_id is that
- * it be unique for a given node.
- */
- __u16 spu_subport_cnt;
- __u16 spu_subport_id;
-
- __u32 spu_unused; /* kept for compatible layout */
-
- /*
- * address of struct base_info to write to
- */
- __u64 spu_base_info;
-
-} __attribute__ ((aligned(8)));
-
-/* User commands. */
-
-#define IPATH_CMD_MIN 16
-
-#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */
-#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
-#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
-#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
-#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
-#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
-#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */
-#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */
-#define IPATH_CMD_USER_INIT 24 /* set up userspace */
-#define IPATH_CMD_UNUSED_1 25
-#define IPATH_CMD_UNUSED_2 26
-#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
-#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
-#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
-/* 30 is unused */
-#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
-#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
-
-/*
- * Poll types
- */
-#define IPATH_POLL_TYPE_URGENT 0x01
-#define IPATH_POLL_TYPE_OVERFLOW 0x02
-
-struct ipath_port_info {
- __u32 num_active; /* number of active units */
- __u32 unit; /* unit (chip) assigned to caller */
- __u16 port; /* port on unit assigned to caller */
- __u16 subport; /* subport on unit assigned to caller */
- __u16 num_ports; /* number of ports available on unit */
- __u16 num_subports; /* number of subports opened on port */
-};
-
-struct ipath_tid_info {
- __u32 tidcnt;
- /* make structure same size in 32 and 64 bit */
- __u32 tid__unused;
- /* virtual address of first page in transfer */
- __u64 tidvaddr;
- /* pointer (same size 32/64 bit) to __u16 tid array */
- __u64 tidlist;
-
- /*
- * pointer (same size 32/64 bit) to bitmap of TIDs used
- * for this call; checked for being large enough at open
- */
- __u64 tidmap;
-};
-
-struct ipath_cmd {
- __u32 type; /* command type */
- union {
- struct ipath_tid_info tid_info;
- struct ipath_user_info user_info;
-
- /*
- * address in userspace where we should put the sdma
- * inflight counter
- */
- __u64 sdma_inflight;
- /*
- * address in userspace where we should put the sdma
- * completion counter
- */
- __u64 sdma_complete;
- /* address in userspace of struct ipath_port_info to
- write result to */
- __u64 port_info;
- /* enable/disable receipt of packets */
- __u32 recv_ctrl;
- /* enable/disable armlaunch errors (non-zero to enable) */
- __u32 armlaunch_ctrl;
- /* partition key to set */
- __u16 part_key;
- /* user address of __u32 bitmask of active slaves */
- __u64 slave_mask_addr;
- /* type of polling we want */
- __u16 poll_type;
- } cmd;
-};
-
-struct ipath_iovec {
- /* Pointer to data, but same size 32 and 64 bit */
- __u64 iov_base;
-
- /*
- * Length of data; don't need 64 bits, but want
- * ipath_sendpkt to remain same size as before 32 bit changes, so...
- */
- __u64 iov_len;
-};
-
-/*
- * Describes a single packet for send. Each packet can have one or more
- * buffers, but the total length (exclusive of IB headers) must be less
- * than the MTU, and if using the PIO method, entire packet length,
- * including IB headers, must be less than the ipath_piosize value (words).
- * Use of this necessitates including sys/uio.h
- */
-struct __ipath_sendpkt {
- __u32 sps_flags; /* flags for packet (TBD) */
- __u32 sps_cnt; /* number of entries to use in sps_iov */
- /* array of iov's describing packet. TEMPORARY */
- struct ipath_iovec sps_iov[4];
-};
-
-/*
- * diagnostics can send a packet by "writing" one of the following
- * two structs to diag data special file
- * The first is the legacy version for backward compatibility
- */
-struct ipath_diag_pkt {
- __u32 unit;
- __u64 data;
- __u32 len;
-};
-
-/* The second diag_pkt struct is the expanded version that allows
- * more control over the packet, specifically, by allowing a custom
- * pbc (+ static rate) qword, so that special modes and deliberate
- * changes to CRCs can be used. The elements were also re-ordered
- * for better alignment and to avoid padding issues.
- */
-struct ipath_diag_xpkt {
- __u64 data;
- __u64 pbc_wd;
- __u32 unit;
- __u32 len;
-};
-
-/*
- * Data layout in I2C flash (for GUID, etc.)
- * All fields are little-endian binary unless otherwise stated
- */
-#define IPATH_FLASH_VERSION 2
-struct ipath_flash {
- /* flash layout version (IPATH_FLASH_VERSION) */
- __u8 if_fversion;
- /* checksum protecting if_length bytes */
- __u8 if_csum;
- /*
- * valid length (in use, protected by if_csum), including
- * if_fversion and if_csum themselves)
- */
- __u8 if_length;
- /* the GUID, in network order */
- __u8 if_guid[8];
- /* number of GUIDs to use, starting from if_guid */
- __u8 if_numguid;
- /* the (last 10 characters of) board serial number, in ASCII */
- char if_serial[12];
- /* board mfg date (YYYYMMDD ASCII) */
- char if_mfgdate[8];
- /* last board rework/test date (YYYYMMDD ASCII) */
- char if_testdate[8];
- /* logging of error counts, TBD */
- __u8 if_errcntp[4];
- /* powered on hours, updated at driver unload */
- __u8 if_powerhour[2];
- /* ASCII free-form comment field */
- char if_comment[32];
- /* Backwards compatible prefix for longer QLogic Serial Numbers */
- char if_sprefix[4];
- /* 82 bytes used, min flash size is 128 bytes */
- __u8 if_future[46];
-};
-
-/*
- * These are the counters implemented in the chip, and are listed in order.
- * The InterCaps naming is taken straight from the chip spec.
- */
-struct infinipath_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 TxSDmaDescCnt; /* was Reserved1 */
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
- __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
- __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
- /* The following are new for IBA7220 */
- __u64 RxVL15DroppedPktCnt;
- __u64 RxOtherLocalPhyErrCnt;
- __u64 PcieRetryBufDiagQwordCnt;
- __u64 ExcessBufferOvflCnt;
- __u64 LocalLinkIntegrityErrCnt;
- __u64 RxVlErrCnt;
- __u64 RxDlidFltrCnt;
-};
-
-/*
- * The next set of defines are for packet headers, and chip register
- * and memory bits that are visible to and/or used by user-mode software
- * The other bits that are used only by the driver or diags are in
- * ipath_registers.h
- */
-
-/* RcvHdrFlags bits */
-#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
-#define INFINIPATH_RHF_LENGTH_SHIFT 0
-#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
-#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
-#define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF
-#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
-#define INFINIPATH_RHF_SEQ_MASK 0xF
-#define INFINIPATH_RHF_SEQ_SHIFT 0
-#define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF
-#define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4
-#define INFINIPATH_RHF_H_ICRCERR 0x80000000
-#define INFINIPATH_RHF_H_VCRCERR 0x40000000
-#define INFINIPATH_RHF_H_PARITYERR 0x20000000
-#define INFINIPATH_RHF_H_LENERR 0x10000000
-#define INFINIPATH_RHF_H_MTUERR 0x08000000
-#define INFINIPATH_RHF_H_IHDRERR 0x04000000
-#define INFINIPATH_RHF_H_TIDERR 0x02000000
-#define INFINIPATH_RHF_H_MKERR 0x01000000
-#define INFINIPATH_RHF_H_IBERR 0x00800000
-#define INFINIPATH_RHF_H_ERR_MASK 0xFF800000
-#define INFINIPATH_RHF_L_USE_EGR 0x80000000
-#define INFINIPATH_RHF_L_SWA 0x00008000
-#define INFINIPATH_RHF_L_SWB 0x00004000
-
-/* infinipath header fields */
-#define INFINIPATH_I_VERS_MASK 0xF
-#define INFINIPATH_I_VERS_SHIFT 28
-#define INFINIPATH_I_PORT_MASK 0xF
-#define INFINIPATH_I_PORT_SHIFT 24
-#define INFINIPATH_I_TID_MASK 0x7FF
-#define INFINIPATH_I_TID_SHIFT 13
-#define INFINIPATH_I_OFFSET_MASK 0x1FFF
-#define INFINIPATH_I_OFFSET_SHIFT 0
-
-/* K_PktFlags bits */
-#define INFINIPATH_KPF_INTR 0x1
-#define INFINIPATH_KPF_SUBPORT_MASK 0x3
-#define INFINIPATH_KPF_SUBPORT_SHIFT 1
-
-#define INFINIPATH_MAX_SUBPORT 4
-
-/* SendPIO per-buffer control */
-#define INFINIPATH_SP_TEST 0x40
-#define INFINIPATH_SP_TESTEBP 0x20
-#define INFINIPATH_SP_TRIGGER_SHIFT 15
-
-/* SendPIOAvail bits */
-#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
-#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
-
-/* infinipath header format */
-struct ipath_header {
- /*
- * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
- * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
- * Port 4, TID 11, offset 13.
- */
- __le32 ver_port_tid_offset;
- __le16 chksum;
- __le16 pkt_flags;
-};
-
-/* infinipath user message header format.
- * This structure contains the first 4 fields common to all protocols
- * that employ infinipath.
- */
-struct ipath_message_header {
- __be16 lrh[4];
- __be32 bth[3];
- /* fields below this point are in host byte order */
- struct ipath_header iph;
- __u8 sub_opcode;
-};
-
-/* infinipath ethernet header format */
-struct ether_header {
- __be16 lrh[4];
- __be32 bth[3];
- struct ipath_header iph;
- __u8 sub_opcode;
- __u8 cmd;
- __be16 lid;
- __u16 mac[3];
- __u8 frag_num;
- __u8 seq_num;
- __le32 len;
- /* MUST be of word size due to PIO write requirements */
- __le32 csum;
- __le16 csum_offset;
- __le16 flags;
- __u16 first_2_bytes;
- __u8 unused[2]; /* currently unused */
-};
-
-
-/* IB - LRH header consts */
-#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
-#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
-
-/* misc. */
-#define SIZE_OF_CRC 1
-
-#define IPATH_DEFAULT_P_KEY 0xFFFF
-#define IPATH_PERMISSIVE_LID 0xFFFF
-#define IPATH_AETH_CREDIT_SHIFT 24
-#define IPATH_AETH_CREDIT_MASK 0x1F
-#define IPATH_AETH_CREDIT_INVAL 0x1F
-#define IPATH_PSN_MASK 0xFFFFFF
-#define IPATH_MSN_MASK 0xFFFFFF
-#define IPATH_QPN_MASK 0xFFFFFF
-#define IPATH_MULTICAST_LID_BASE 0xC000
-#define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK
-#define IPATH_MULTICAST_QPN 0xFFFFFF
-
-/* Receive Header Queue: receive type (from infinipath) */
-#define RCVHQ_RCV_TYPE_EXPECTED 0
-#define RCVHQ_RCV_TYPE_EAGER 1
-#define RCVHQ_RCV_TYPE_NON_KD 2
-#define RCVHQ_RCV_TYPE_ERROR 3
-
-
-/* sub OpCodes - ith4x */
-#define IPATH_ITH4X_OPCODE_ENCAP 0x81
-#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
-
-#define IPATH_HEADER_QUEUE_WORDS 9
-
-/* functions for extracting fields from rcvhdrq entries for the driver.
- */
-static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
-{
- return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK;
-}
-
-static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
- & INFINIPATH_RHF_RCVTYPE_MASK;
-}
-
-static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
-{
- return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
- & INFINIPATH_RHF_LENGTH_MASK) << 2;
-}
-
-static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
-{
- return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
- & INFINIPATH_RHF_EGRINDEX_MASK;
-}
-
-static inline __u32 ipath_hdrget_seq(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT)
- & INFINIPATH_RHF_SEQ_MASK;
-}
-
-static inline __u32 ipath_hdrget_offset(const __le32 *rbuf)
-{
- return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT)
- & INFINIPATH_RHF_HDRQ_OFFSET_MASK;
-}
-
-static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf)
-{
- return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR;
-}
-
-static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
-{
- return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
- & INFINIPATH_I_VERS_MASK;
-}
-
-#endif /* _IPATH_COMMON_H */
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_cq_enter - add a new entry to the completion queue
- * @cq: completion queue
- * @entry: work completion entry to add
- * @sig: true if @entry is a solicitated entry
- *
- * This may be called with qp->s_lock held.
- */
-void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int solicited)
-{
- struct ipath_cq_wc *wc;
- unsigned long flags;
- u32 head;
- u32 next;
-
- spin_lock_irqsave(&cq->lock, flags);
-
- /*
- * Note that the head pointer might be writable by user processes.
- * Take care to verify it is a sane value.
- */
- wc = cq->queue;
- head = wc->head;
- if (head >= (unsigned) cq->ibcq.cqe) {
- head = cq->ibcq.cqe;
- next = 0;
- } else
- next = head + 1;
- if (unlikely(next == wc->tail)) {
- spin_unlock_irqrestore(&cq->lock, flags);
- if (cq->ibcq.event_handler) {
- struct ib_event ev;
-
- ev.device = cq->ibcq.device;
- ev.element.cq = &cq->ibcq;
- ev.event = IB_EVENT_CQ_ERR;
- cq->ibcq.event_handler(&ev, cq->ibcq.cq_context);
- }
- return;
- }
- if (cq->ip) {
- wc->uqueue[head].wr_id = entry->wr_id;
- wc->uqueue[head].status = entry->status;
- wc->uqueue[head].opcode = entry->opcode;
- wc->uqueue[head].vendor_err = entry->vendor_err;
- wc->uqueue[head].byte_len = entry->byte_len;
- wc->uqueue[head].ex.imm_data = (__u32 __force) entry->ex.imm_data;
- wc->uqueue[head].qp_num = entry->qp->qp_num;
- wc->uqueue[head].src_qp = entry->src_qp;
- wc->uqueue[head].wc_flags = entry->wc_flags;
- wc->uqueue[head].pkey_index = entry->pkey_index;
- wc->uqueue[head].slid = entry->slid;
- wc->uqueue[head].sl = entry->sl;
- wc->uqueue[head].dlid_path_bits = entry->dlid_path_bits;
- wc->uqueue[head].port_num = entry->port_num;
- /* Make sure entry is written before the head index. */
- smp_wmb();
- } else
- wc->kqueue[head] = *entry;
- wc->head = next;
-
- if (cq->notify == IB_CQ_NEXT_COMP ||
- (cq->notify == IB_CQ_SOLICITED && solicited)) {
- cq->notify = IB_CQ_NONE;
- cq->triggered++;
- /*
- * This will cause send_complete() to be called in
- * another thread.
- */
- tasklet_hi_schedule(&cq->comptask);
- }
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
- if (entry->status != IB_WC_SUCCESS)
- to_idev(cq->ibcq.device)->n_wqe_errs++;
-}
-
-/**
- * ipath_poll_cq - poll for work completion entries
- * @ibcq: the completion queue to poll
- * @num_entries: the maximum number of entries to return
- * @entry: pointer to array where work completions are placed
- *
- * Returns the number of completion entries polled.
- *
- * This may be called from interrupt context. Also called by ib_poll_cq()
- * in the generic verbs code.
- */
-int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- struct ipath_cq_wc *wc;
- unsigned long flags;
- int npolled;
- u32 tail;
-
- /* The kernel can only poll a kernel completion queue */
- if (cq->ip) {
- npolled = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&cq->lock, flags);
-
- wc = cq->queue;
- tail = wc->tail;
- if (tail > (u32) cq->ibcq.cqe)
- tail = (u32) cq->ibcq.cqe;
- for (npolled = 0; npolled < num_entries; ++npolled, ++entry) {
- if (tail == wc->head)
- break;
- /* The kernel doesn't need a RMB since it has the lock. */
- *entry = wc->kqueue[tail];
- if (tail >= cq->ibcq.cqe)
- tail = 0;
- else
- tail++;
- }
- wc->tail = tail;
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
-bail:
- return npolled;
-}
-
-static void send_complete(unsigned long data)
-{
- struct ipath_cq *cq = (struct ipath_cq *)data;
-
- /*
- * The completion handler will most likely rearm the notification
- * and poll for all pending entries. If a new completion entry
- * is added while we are in this routine, tasklet_hi_schedule()
- * won't call us again until we return so we check triggered to
- * see if we need to call the handler again.
- */
- for (;;) {
- u8 triggered = cq->triggered;
-
- cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context);
-
- if (cq->triggered == triggered)
- return;
- }
-}
-
-/**
- * ipath_create_cq - create a completion queue
- * @ibdev: the device this completion queue is attached to
- * @attr: creation attributes
- * @context: unused by the InfiniPath driver
- * @udata: unused by the InfiniPath driver
- *
- * Returns a pointer to the completion queue or negative errno values
- * for failure.
- *
- * Called by ib_create_cq() in the generic verbs code.
- */
-struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
- const struct ib_cq_init_attr *attr,
- struct ib_ucontext *context,
- struct ib_udata *udata)
-{
- int entries = attr->cqe;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cq *cq;
- struct ipath_cq_wc *wc;
- struct ib_cq *ret;
- u32 sz;
-
- if (attr->flags)
- return ERR_PTR(-EINVAL);
-
- if (entries < 1 || entries > ib_ipath_max_cqes) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- /* Allocate the completion queue structure. */
- cq = kmalloc(sizeof(*cq), GFP_KERNEL);
- if (!cq) {
- ret = ERR_PTR(-ENOMEM);
- goto done;
- }
-
- /*
- * Allocate the completion queue entries and head/tail pointers.
- * This is allocated separately so that it can be resized and
- * also mapped into user space.
- * We need to use vmalloc() in order to support mmap and large
- * numbers of entries.
- */
- sz = sizeof(*wc);
- if (udata && udata->outlen >= sizeof(__u64))
- sz += sizeof(struct ib_uverbs_wc) * (entries + 1);
- else
- sz += sizeof(struct ib_wc) * (entries + 1);
- wc = vmalloc_user(sz);
- if (!wc) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_cq;
- }
-
- /*
- * Return the address of the WC as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- int err;
-
- cq->ip = ipath_create_mmap_info(dev, sz, context, wc);
- if (!cq->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_wc;
- }
-
- err = ib_copy_to_udata(udata, &cq->ip->offset,
- sizeof(cq->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else
- cq->ip = NULL;
-
- spin_lock(&dev->n_cqs_lock);
- if (dev->n_cqs_allocated == ib_ipath_max_cqs) {
- spin_unlock(&dev->n_cqs_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_cqs_allocated++;
- spin_unlock(&dev->n_cqs_lock);
-
- if (cq->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&cq->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- /*
- * ib_create_cq() will initialize cq->ibcq except for cq->ibcq.cqe.
- * The number of entries should be >= the number requested or return
- * an error.
- */
- cq->ibcq.cqe = entries;
- cq->notify = IB_CQ_NONE;
- cq->triggered = 0;
- spin_lock_init(&cq->lock);
- tasklet_init(&cq->comptask, send_complete, (unsigned long)cq);
- wc->head = 0;
- wc->tail = 0;
- cq->queue = wc;
-
- ret = &cq->ibcq;
-
- goto done;
-
-bail_ip:
- kfree(cq->ip);
-bail_wc:
- vfree(wc);
-bail_cq:
- kfree(cq);
-done:
- return ret;
-}
-
-/**
- * ipath_destroy_cq - destroy a completion queue
- * @ibcq: the completion queue to destroy.
- *
- * Returns 0 for success.
- *
- * Called by ib_destroy_cq() in the generic verbs code.
- */
-int ipath_destroy_cq(struct ib_cq *ibcq)
-{
- struct ipath_ibdev *dev = to_idev(ibcq->device);
- struct ipath_cq *cq = to_icq(ibcq);
-
- tasklet_kill(&cq->comptask);
- spin_lock(&dev->n_cqs_lock);
- dev->n_cqs_allocated--;
- spin_unlock(&dev->n_cqs_lock);
- if (cq->ip)
- kref_put(&cq->ip->ref, ipath_release_mmap_info);
- else
- vfree(cq->queue);
- kfree(cq);
-
- return 0;
-}
-
-/**
- * ipath_req_notify_cq - change the notification type for a completion queue
- * @ibcq: the completion queue
- * @notify_flags: the type of notification to request
- *
- * Returns 0 for success.
- *
- * This may be called from interrupt context. Also called by
- * ib_req_notify_cq() in the generic verbs code.
- */
-int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&cq->lock, flags);
- /*
- * Don't change IB_CQ_NEXT_COMP to IB_CQ_SOLICITED but allow
- * any other transitions (see C11-31 and C11-32 in ch. 11.4.2.2).
- */
- if (cq->notify != IB_CQ_NEXT_COMP)
- cq->notify = notify_flags & IB_CQ_SOLICITED_MASK;
-
- if ((notify_flags & IB_CQ_REPORT_MISSED_EVENTS) &&
- cq->queue->head != cq->queue->tail)
- ret = 1;
-
- spin_unlock_irqrestore(&cq->lock, flags);
-
- return ret;
-}
-
-/**
- * ipath_resize_cq - change the size of the CQ
- * @ibcq: the completion queue
- *
- * Returns 0 for success.
- */
-int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata)
-{
- struct ipath_cq *cq = to_icq(ibcq);
- struct ipath_cq_wc *old_wc;
- struct ipath_cq_wc *wc;
- u32 head, tail, n;
- int ret;
- u32 sz;
-
- if (cqe < 1 || cqe > ib_ipath_max_cqes) {
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * Need to use vmalloc() if we want to support large #s of entries.
- */
- sz = sizeof(*wc);
- if (udata && udata->outlen >= sizeof(__u64))
- sz += sizeof(struct ib_uverbs_wc) * (cqe + 1);
- else
- sz += sizeof(struct ib_wc) * (cqe + 1);
- wc = vmalloc_user(sz);
- if (!wc) {
- ret = -ENOMEM;
- goto bail;
- }
-
- /* Check that we can write the offset to mmap. */
- if (udata && udata->outlen >= sizeof(__u64)) {
- __u64 offset = 0;
-
- ret = ib_copy_to_udata(udata, &offset, sizeof(offset));
- if (ret)
- goto bail_free;
- }
-
- spin_lock_irq(&cq->lock);
- /*
- * Make sure head and tail are sane since they
- * might be user writable.
- */
- old_wc = cq->queue;
- head = old_wc->head;
- if (head > (u32) cq->ibcq.cqe)
- head = (u32) cq->ibcq.cqe;
- tail = old_wc->tail;
- if (tail > (u32) cq->ibcq.cqe)
- tail = (u32) cq->ibcq.cqe;
- if (head < tail)
- n = cq->ibcq.cqe + 1 + head - tail;
- else
- n = head - tail;
- if (unlikely((u32)cqe < n)) {
- ret = -EINVAL;
- goto bail_unlock;
- }
- for (n = 0; tail != head; n++) {
- if (cq->ip)
- wc->uqueue[n] = old_wc->uqueue[tail];
- else
- wc->kqueue[n] = old_wc->kqueue[tail];
- if (tail == (u32) cq->ibcq.cqe)
- tail = 0;
- else
- tail++;
- }
- cq->ibcq.cqe = cqe;
- wc->head = n;
- wc->tail = 0;
- cq->queue = wc;
- spin_unlock_irq(&cq->lock);
-
- vfree(old_wc);
-
- if (cq->ip) {
- struct ipath_ibdev *dev = to_idev(ibcq->device);
- struct ipath_mmap_info *ip = cq->ip;
-
- ipath_update_mmap_info(dev, ip, sz, wc);
-
- /*
- * Return the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- ret = ib_copy_to_udata(udata, &ip->offset,
- sizeof(ip->offset));
- if (ret)
- goto bail;
- }
-
- spin_lock_irq(&dev->pending_lock);
- if (list_empty(&ip->pending_mmaps))
- list_add(&ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = 0;
- goto bail;
-
-bail_unlock:
- spin_unlock_irq(&cq->lock);
-bail_free:
- vfree(wc);
-bail:
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_DEBUG_H
-#define _IPATH_DEBUG_H
-
-#ifndef _IPATH_DEBUGGING /* debugging enabled or not */
-#define _IPATH_DEBUGGING 1
-#endif
-
-#if _IPATH_DEBUGGING
-
-/*
- * Mask values for debugging. The scheme allows us to compile out any
- * of the debug tracing stuff, and if compiled in, to enable or disable
- * dynamically. This can be set at modprobe time also:
- * modprobe infinipath.ko infinipath_debug=7
- */
-
-#define __IPATH_INFO 0x1 /* generic low verbosity stuff */
-#define __IPATH_DBG 0x2 /* generic debug */
-#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */
-/* leave some low verbosity spots open */
-#define __IPATH_VERBDBG 0x40 /* very verbose debug */
-#define __IPATH_PKTDBG 0x80 /* print packet data */
-/* print process startup (init)/exit messages */
-#define __IPATH_PROCDBG 0x100
-/* print mmap/fault stuff, not using VDBG any more */
-#define __IPATH_MMDBG 0x200
-#define __IPATH_ERRPKTDBG 0x400
-#define __IPATH_USER_SEND 0x1000 /* use user mode send */
-#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
-#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
-#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) gen debug */
-#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings */
-#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
-#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
-#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
-#define __IPATH_LINKVERBDBG 0x200000 /* very verbose linkchange debug */
-
-#else /* _IPATH_DEBUGGING */
-
-/*
- * define all of these even with debugging off, for the few places that do
- * if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the
- * compiler eliminate the code
- */
-
-#define __IPATH_INFO 0x0 /* generic low verbosity stuff */
-#define __IPATH_DBG 0x0 /* generic debug */
-#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
-#define __IPATH_VERBDBG 0x0 /* very verbose debug */
-#define __IPATH_PKTDBG 0x0 /* print packet data */
-#define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */
-/* print mmap/fault stuff, not using VDBG any more */
-#define __IPATH_MMDBG 0x0
-#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
-#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
-#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
-#define __IPATH_LINKVERBDBG 0x0 /* very verbose linkchange debug */
-
-#endif /* _IPATH_DEBUGGING */
-
-#define __IPATH_VERBOSEDBG __IPATH_VERBDBG
-
-#endif /* _IPATH_DEBUG_H */
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains support for diagnostic functions. It is accessed by
- * opening the ipath_diag device, normally minor number 129. Diagnostic use
- * of the InfiniPath chip may render the chip or board unusable until the
- * driver is unloaded, or in some cases, until the system is rebooted.
- *
- * Accesses to the chip through this interface are not similar to going
- * through the /sys/bus/pci resource mmap interface.
- */
-
-#include <linux/io.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/export.h>
-#include <asm/uaccess.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-
-int ipath_diag_inuse;
-static int diag_set_link;
-
-static int ipath_diag_open(struct inode *in, struct file *fp);
-static int ipath_diag_release(struct inode *in, struct file *fp);
-static ssize_t ipath_diag_read(struct file *fp, char __user *data,
- size_t count, loff_t *off);
-static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off);
-
-static const struct file_operations diag_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_diag_write,
- .read = ipath_diag_read,
- .open = ipath_diag_open,
- .release = ipath_diag_release,
- .llseek = default_llseek,
-};
-
-static ssize_t ipath_diagpkt_write(struct file *fp,
- const char __user *data,
- size_t count, loff_t *off);
-
-static const struct file_operations diagpkt_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_diagpkt_write,
- .llseek = noop_llseek,
-};
-
-static atomic_t diagpkt_count = ATOMIC_INIT(0);
-static struct cdev *diagpkt_cdev;
-static struct device *diagpkt_dev;
-
-int ipath_diag_add(struct ipath_devdata *dd)
-{
- char name[16];
- int ret = 0;
-
- if (atomic_inc_return(&diagpkt_count) == 1) {
- ret = ipath_cdev_init(IPATH_DIAGPKT_MINOR,
- "ipath_diagpkt", &diagpkt_file_ops,
- &diagpkt_cdev, &diagpkt_dev);
-
- if (ret) {
- ipath_dev_err(dd, "Couldn't create ipath_diagpkt "
- "device: %d", ret);
- goto done;
- }
- }
-
- snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
-
- ret = ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
- &diag_file_ops, &dd->diag_cdev,
- &dd->diag_dev);
- if (ret)
- ipath_dev_err(dd, "Couldn't create %s device: %d",
- name, ret);
-
-done:
- return ret;
-}
-
-void ipath_diag_remove(struct ipath_devdata *dd)
-{
- if (atomic_dec_and_test(&diagpkt_count))
- ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_dev);
-
- ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_dev);
-}
-
-/**
- * ipath_read_umem64 - read a 64-bit quantity from the chip into user space
- * @dd: the infinipath device
- * @uaddr: the location to store the data in user memory
- * @caddr: the source chip address (full pointer, not offset)
- * @count: number of bytes to copy (multiple of 32 bits)
- *
- * This function also localizes all chip memory accesses.
- * The copy should be written such that we read full cacheline packets
- * from the chip. This is usually used for a single qword
- *
- * NOTE: This assumes the chip address is 64-bit aligned.
- */
-static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr,
- const void __iomem *caddr, size_t count)
-{
- const u64 __iomem *reg_addr = caddr;
- const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
- int ret;
-
- /* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u64 data = readq(reg_addr);
- if (copy_to_user(uaddr, &data, sizeof(u64))) {
- ret = -EFAULT;
- goto bail;
- }
- reg_addr++;
- uaddr += sizeof(u64);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_write_umem64 - write a 64-bit quantity to the chip from user space
- * @dd: the infinipath device
- * @caddr: the destination chip address (full pointer, not offset)
- * @uaddr: the source of the data in user memory
- * @count: the number of bytes to copy (multiple of 32 bits)
- *
- * This is usually used for a single qword
- * NOTE: This assumes the chip address is 64-bit aligned.
- */
-
-static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr,
- const void __user *uaddr, size_t count)
-{
- u64 __iomem *reg_addr = caddr;
- const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
- int ret;
-
- /* not very efficient, but it works for now */
- if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u64 data;
- if (copy_from_user(&data, uaddr, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
- writeq(data, reg_addr);
-
- reg_addr++;
- uaddr += sizeof(u64);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_read_umem32 - read a 32-bit quantity from the chip into user space
- * @dd: the infinipath device
- * @uaddr: the location to store the data in user memory
- * @caddr: the source chip address (full pointer, not offset)
- * @count: number of bytes to copy
- *
- * read 32 bit values, not 64 bit; for memories that only
- * support 32 bit reads; usually a single dword.
- */
-static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr,
- const void __iomem *caddr, size_t count)
-{
- const u32 __iomem *reg_addr = caddr;
- const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
- int ret;
-
- if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
- reg_end > (u32 __iomem *) dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- /* not very efficient, but it works for now */
- while (reg_addr < reg_end) {
- u32 data = readl(reg_addr);
- if (copy_to_user(uaddr, &data, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
-
- reg_addr++;
- uaddr += sizeof(u32);
-
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_write_umem32 - write a 32-bit quantity to the chip from user space
- * @dd: the infinipath device
- * @caddr: the destination chip address (full pointer, not offset)
- * @uaddr: the source of the data in user memory
- * @count: number of bytes to copy
- *
- * write 32 bit values, not 64 bit; for memories that only
- * support 32 bit write; usually a single dword.
- */
-
-static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr,
- const void __user *uaddr, size_t count)
-{
- u32 __iomem *reg_addr = caddr;
- const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
- int ret;
-
- if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
- reg_end > (u32 __iomem *) dd->ipath_kregend) {
- ret = -EINVAL;
- goto bail;
- }
- while (reg_addr < reg_end) {
- u32 data;
- if (copy_from_user(&data, uaddr, sizeof(data))) {
- ret = -EFAULT;
- goto bail;
- }
- writel(data, reg_addr);
-
- reg_addr++;
- uaddr += sizeof(u32);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-static int ipath_diag_open(struct inode *in, struct file *fp)
-{
- int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
- struct ipath_devdata *dd;
- int ret;
-
- mutex_lock(&ipath_mutex);
-
- if (ipath_diag_inuse) {
- ret = -EBUSY;
- goto bail;
- }
-
- dd = ipath_lookup(unit);
-
- if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase) {
- ret = -ENODEV;
- goto bail;
- }
-
- fp->private_data = dd;
- ipath_diag_inuse = -2;
- diag_set_link = 0;
- ret = 0;
-
- /* Only expose a way to reset the device if we
- make it into diag mode. */
- ipath_expose_reset(&dd->pcidev->dev);
-
-bail:
- mutex_unlock(&ipath_mutex);
-
- return ret;
-}
-
-/**
- * ipath_diagpkt_write - write an IB packet
- * @fp: the diag data device file pointer
- * @data: ipath_diag_pkt structure saying where to get the packet
- * @count: size of data to write
- * @off: unused by this code
- */
-static ssize_t ipath_diagpkt_write(struct file *fp,
- const char __user *data,
- size_t count, loff_t *off)
-{
- u32 __iomem *piobuf;
- u32 plen, pbufn, maxlen_reserve;
- struct ipath_diag_pkt odp;
- struct ipath_diag_xpkt dp;
- u32 *tmpbuf = NULL;
- struct ipath_devdata *dd;
- ssize_t ret = 0;
- u64 val;
- u32 l_state, lt_state; /* LinkState, LinkTrainingState */
-
-
- if (count == sizeof(dp)) {
- if (copy_from_user(&dp, data, sizeof(dp))) {
- ret = -EFAULT;
- goto bail;
- }
- } else if (count == sizeof(odp)) {
- if (copy_from_user(&odp, data, sizeof(odp))) {
- ret = -EFAULT;
- goto bail;
- }
- dp.len = odp.len;
- dp.unit = odp.unit;
- dp.data = odp.data;
- dp.pbc_wd = 0;
- } else {
- ret = -EINVAL;
- goto bail;
- }
-
- /* send count must be an exact number of dwords */
- if (dp.len & 3) {
- ret = -EINVAL;
- goto bail;
- }
-
- plen = dp.len >> 2;
-
- dd = ipath_lookup(dp.unit);
- if (!dd || !(dd->ipath_flags & IPATH_PRESENT) ||
- !dd->ipath_kregbase) {
- ipath_cdbg(VERBOSE, "illegal unit %u for diag data send\n",
- dp.unit);
- ret = -ENODEV;
- goto bail;
- }
-
- if (ipath_diag_inuse && !diag_set_link &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- diag_set_link = 1;
- ipath_cdbg(VERBOSE, "Trying to set to set link active for "
- "diag pkt\n");
- ipath_set_linkstate(dd, IPATH_IB_LINKARM);
- ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
- }
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ipath_cdbg(VERBOSE, "unit %u not usable\n", dd->ipath_unit);
- ret = -ENODEV;
- goto bail;
- }
- /*
- * Want to skip check for l_state if using custom PBC,
- * because we might be trying to force an SM packet out.
- * first-cut, skip _all_ state checking in that case.
- */
- val = ipath_ib_state(dd, dd->ipath_lastibcstat);
- lt_state = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
- l_state = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
- if (!dp.pbc_wd && (lt_state != INFINIPATH_IBCS_LT_STATE_LINKUP ||
- (val != dd->ib_init && val != dd->ib_arm &&
- val != dd->ib_active))) {
- ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n",
- dd->ipath_unit, (unsigned long long) val);
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * need total length before first word written, plus 2 Dwords. One Dword
- * is for padding so we get the full user data when not aligned on
- * a word boundary. The other Dword is to make sure we have room for the
- * ICRC which gets tacked on later.
- */
- maxlen_reserve = 2 * sizeof(u32);
- if (dp.len > dd->ipath_ibmaxlen - maxlen_reserve) {
- ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n",
- dp.len, dd->ipath_ibmaxlen);
- ret = -EINVAL;
- goto bail;
- }
-
- plen = sizeof(u32) + dp.len;
-
- tmpbuf = vmalloc(plen);
- if (!tmpbuf) {
- dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, "
- "failing\n");
- ret = -ENOMEM;
- goto bail;
- }
-
- if (copy_from_user(tmpbuf,
- (const void __user *) (unsigned long) dp.data,
- dp.len)) {
- ret = -EFAULT;
- goto bail;
- }
-
- plen >>= 2; /* in dwords */
-
- piobuf = ipath_getpiobuf(dd, plen, &pbufn);
- if (!piobuf) {
- ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n",
- dd->ipath_unit);
- ret = -EBUSY;
- goto bail;
- }
- /* disarm it just to be extra sure */
- ipath_disarm_piobufs(dd, pbufn, 1);
-
- if (ipath_debug & __IPATH_PKTDBG)
- ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n",
- dd->ipath_unit, plen - 1, pbufn);
-
- if (dp.pbc_wd == 0)
- dp.pbc_wd = plen;
- writeq(dp.pbc_wd, piobuf);
- /*
- * Copy all by the trigger word, then flush, so it's written
- * to chip before trigger word, then write trigger word, then
- * flush again, so packet is sent.
- */
- if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
- ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, tmpbuf, plen - 1);
- ipath_flush_wc();
- __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
- } else
- __iowrite32_copy(piobuf + 2, tmpbuf, plen);
-
- ipath_flush_wc();
-
- ret = sizeof(dp);
-
-bail:
- vfree(tmpbuf);
- return ret;
-}
-
-static int ipath_diag_release(struct inode *in, struct file *fp)
-{
- mutex_lock(&ipath_mutex);
- ipath_diag_inuse = 0;
- fp->private_data = NULL;
- mutex_unlock(&ipath_mutex);
- return 0;
-}
-
-static ssize_t ipath_diag_read(struct file *fp, char __user *data,
- size_t count, loff_t *off)
-{
- struct ipath_devdata *dd = fp->private_data;
- void __iomem *kreg_base;
- ssize_t ret;
-
- kreg_base = dd->ipath_kregbase;
-
- if (count == 0)
- ret = 0;
- else if ((count % 4) || (*off % 4))
- /* address or length is not 32-bit aligned, hence invalid */
- ret = -EINVAL;
- else if (ipath_diag_inuse < 1 && (*off || count != 8))
- ret = -EINVAL; /* prevent cat /dev/ipath_diag* */
- else if ((count % 8) || (*off % 8))
- /* address or length not 64-bit aligned; do 32-bit reads */
- ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
- else
- ret = ipath_read_umem64(dd, data, kreg_base + *off, count);
-
- if (ret >= 0) {
- *off += count;
- ret = count;
- if (ipath_diag_inuse == -2)
- ipath_diag_inuse++;
- }
-
- return ret;
-}
-
-static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off)
-{
- struct ipath_devdata *dd = fp->private_data;
- void __iomem *kreg_base;
- ssize_t ret;
-
- kreg_base = dd->ipath_kregbase;
-
- if (count == 0)
- ret = 0;
- else if ((count % 4) || (*off % 4))
- /* address or length is not 32-bit aligned, hence invalid */
- ret = -EINVAL;
- else if ((ipath_diag_inuse == -1 && (*off || count != 8)) ||
- ipath_diag_inuse == -2) /* read qw off 0, write qw off 0 */
- ret = -EINVAL; /* before any other write allowed */
- else if ((count % 8) || (*off % 8))
- /* address or length not 64-bit aligned; do 32-bit writes */
- ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
- else
- ret = ipath_write_umem64(dd, kreg_base + *off, data, count);
-
- if (ret >= 0) {
- *off += count;
- ret = count;
- if (ipath_diag_inuse == -1)
- ipath_diag_inuse = 1; /* all read/write OK now */
- }
-
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006 QLogic, Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/scatterlist.h>
-#include <linux/gfp.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_verbs.h"
-
-#define BAD_DMA_ADDRESS ((u64) 0)
-
-/*
- * The following functions implement driver specific replacements
- * for the ib_dma_*() functions.
- *
- * These functions return kernel virtual addresses instead of
- * device bus addresses since the driver uses the CPU to copy
- * data instead of using hardware DMA.
- */
-
-static int ipath_mapping_error(struct ib_device *dev, u64 dma_addr)
-{
- return dma_addr == BAD_DMA_ADDRESS;
-}
-
-static u64 ipath_dma_map_single(struct ib_device *dev,
- void *cpu_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
- return (u64) cpu_addr;
-}
-
-static void ipath_dma_unmap_single(struct ib_device *dev,
- u64 addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static u64 ipath_dma_map_page(struct ib_device *dev,
- struct page *page,
- unsigned long offset,
- size_t size,
- enum dma_data_direction direction)
-{
- u64 addr;
-
- BUG_ON(!valid_dma_direction(direction));
-
- if (offset + size > PAGE_SIZE) {
- addr = BAD_DMA_ADDRESS;
- goto done;
- }
-
- addr = (u64) page_address(page);
- if (addr)
- addr += offset;
- /* TODO: handle highmem pages */
-
-done:
- return addr;
-}
-
-static void ipath_dma_unmap_page(struct ib_device *dev,
- u64 addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static int ipath_map_sg(struct ib_device *dev, struct scatterlist *sgl,
- int nents, enum dma_data_direction direction)
-{
- struct scatterlist *sg;
- u64 addr;
- int i;
- int ret = nents;
-
- BUG_ON(!valid_dma_direction(direction));
-
- for_each_sg(sgl, sg, nents, i) {
- addr = (u64) page_address(sg_page(sg));
- /* TODO: handle highmem pages */
- if (!addr) {
- ret = 0;
- break;
- }
- sg->dma_address = addr + sg->offset;
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
- sg->dma_length = sg->length;
-#endif
- }
- return ret;
-}
-
-static void ipath_unmap_sg(struct ib_device *dev,
- struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-static void ipath_sync_single_for_cpu(struct ib_device *dev,
- u64 addr,
- size_t size,
- enum dma_data_direction dir)
-{
-}
-
-static void ipath_sync_single_for_device(struct ib_device *dev,
- u64 addr,
- size_t size,
- enum dma_data_direction dir)
-{
-}
-
-static void *ipath_dma_alloc_coherent(struct ib_device *dev, size_t size,
- u64 *dma_handle, gfp_t flag)
-{
- struct page *p;
- void *addr = NULL;
-
- p = alloc_pages(flag, get_order(size));
- if (p)
- addr = page_address(p);
- if (dma_handle)
- *dma_handle = (u64) addr;
- return addr;
-}
-
-static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
- void *cpu_addr, u64 dma_handle)
-{
- free_pages((unsigned long) cpu_addr, get_order(size));
-}
-
-struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
- .mapping_error = ipath_mapping_error,
- .map_single = ipath_dma_map_single,
- .unmap_single = ipath_dma_unmap_single,
- .map_page = ipath_dma_map_page,
- .unmap_page = ipath_dma_unmap_page,
- .map_sg = ipath_map_sg,
- .unmap_sg = ipath_unmap_sg,
- .sync_single_for_cpu = ipath_sync_single_for_cpu,
- .sync_single_for_device = ipath_sync_single_for_device,
- .alloc_coherent = ipath_dma_alloc_coherent,
- .free_coherent = ipath_dma_free_coherent
-};
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/idr.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#ifdef CONFIG_X86_64
-#include <asm/pat.h>
-#endif
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-
-static void ipath_update_pio_bufs(struct ipath_devdata *);
-
-const char *ipath_get_unit_name(int unit)
-{
- static char iname[16];
- snprintf(iname, sizeof iname, "infinipath%u", unit);
- return iname;
-}
-
-#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
-#define PFX IPATH_DRV_NAME ": "
-
-/*
- * The size has to be longer than this string, so we can append
- * board/chip information to it in the init code.
- */
-const char ib_ipath_version[] = IPATH_IDSTR "\n";
-
-static struct idr unit_table;
-DEFINE_SPINLOCK(ipath_devs_lock);
-LIST_HEAD(ipath_dev_list);
-
-wait_queue_head_t ipath_state_wait;
-
-unsigned ipath_debug = __IPATH_INFO;
-
-module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(debug, "mask for debug prints");
-EXPORT_SYMBOL_GPL(ipath_debug);
-
-unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
-module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
-MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
-
-static unsigned ipath_hol_timeout_ms = 13000;
-module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
-MODULE_PARM_DESC(hol_timeout_ms,
- "duration of user app suspension after link failure");
-
-unsigned ipath_linkrecovery = 1;
-module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue");
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("QLogic <support@qlogic.com>");
-MODULE_DESCRIPTION("QLogic InfiniPath driver");
-
-/*
- * Table to translate the LINKTRAININGSTATE portion of
- * IBCStatus to a human-readable form.
- */
-const char *ipath_ibcstatus_str[] = {
- "Disabled",
- "LinkUp",
- "PollActive",
- "PollQuiet",
- "SleepDelay",
- "SleepQuiet",
- "LState6", /* unused */
- "LState7", /* unused */
- "CfgDebounce",
- "CfgRcvfCfg",
- "CfgWaitRmt",
- "CfgIdle",
- "RecovRetrain",
- "CfgTxRevLane", /* unused before IBA7220 */
- "RecovWaitRmt",
- "RecovIdle",
- /* below were added for IBA7220 */
- "CfgEnhanced",
- "CfgTest",
- "CfgWaitRmtTest",
- "CfgWaitCfgEnhanced",
- "SendTS_T",
- "SendTstIdles",
- "RcvTS_T",
- "SendTst_TS1s",
- "LTState18", "LTState19", "LTState1A", "LTState1B",
- "LTState1C", "LTState1D", "LTState1E", "LTState1F"
-};
-
-static void ipath_remove_one(struct pci_dev *);
-static int ipath_init_one(struct pci_dev *, const struct pci_device_id *);
-
-/* Only needed for registration, nothing else needs this info */
-#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
-#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
-
-/* Number of seconds before our card status check... */
-#define STATUS_TIMEOUT 60
-
-static const struct pci_device_id ipath_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
-
-static struct pci_driver ipath_driver = {
- .name = IPATH_DRV_NAME,
- .probe = ipath_init_one,
- .remove = ipath_remove_one,
- .id_table = ipath_pci_tbl,
- .driver = {
- .groups = ipath_driver_attr_groups,
- },
-};
-
-static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
- u32 *bar0, u32 *bar1)
-{
- int ret;
-
- ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
- if (ret)
- ipath_dev_err(dd, "failed to read bar0 before enable: "
- "error %d\n", -ret);
-
- ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1);
- if (ret)
- ipath_dev_err(dd, "failed to read bar1 before enable: "
- "error %d\n", -ret);
-
- ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1);
-}
-
-static void ipath_free_devdata(struct pci_dev *pdev,
- struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- pci_set_drvdata(pdev, NULL);
-
- if (dd->ipath_unit != -1) {
- spin_lock_irqsave(&ipath_devs_lock, flags);
- idr_remove(&unit_table, dd->ipath_unit);
- list_del(&dd->ipath_list);
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- }
- vfree(dd);
-}
-
-static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
-{
- unsigned long flags;
- struct ipath_devdata *dd;
- int ret;
-
- dd = vzalloc(sizeof(*dd));
- if (!dd) {
- dd = ERR_PTR(-ENOMEM);
- goto bail;
- }
- dd->ipath_unit = -1;
-
- idr_preload(GFP_KERNEL);
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate unit ID: error %d\n", -ret);
- ipath_free_devdata(pdev, dd);
- dd = ERR_PTR(ret);
- goto bail_unlock;
- }
- dd->ipath_unit = ret;
-
- dd->pcidev = pdev;
- pci_set_drvdata(pdev, dd);
-
- list_add(&dd->ipath_list, &ipath_dev_list);
-
-bail_unlock:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- idr_preload_end();
-bail:
- return dd;
-}
-
-static inline struct ipath_devdata *__ipath_lookup(int unit)
-{
- return idr_find(&unit_table, unit);
-}
-
-struct ipath_devdata *ipath_lookup(int unit)
-{
- struct ipath_devdata *dd;
- unsigned long flags;
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
- dd = __ipath_lookup(unit);
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- return dd;
-}
-
-int ipath_count_units(int *npresentp, int *nupp, int *maxportsp)
-{
- int nunits, npresent, nup;
- struct ipath_devdata *dd;
- unsigned long flags;
- int maxports;
-
- nunits = npresent = nup = maxports = 0;
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- nunits++;
- if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase)
- npresent++;
- if (dd->ipath_lid &&
- !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN
- | IPATH_LINKUNK)))
- nup++;
- if (dd->ipath_cfgports > maxports)
- maxports = dd->ipath_cfgports;
- }
-
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- if (npresentp)
- *npresentp = npresent;
- if (nupp)
- *nupp = nup;
- if (maxportsp)
- *maxportsp = maxports;
-
- return nunits;
-}
-
-/*
- * These next two routines are placeholders in case we don't have per-arch
- * code for controlling write combining. If explicit control of write
- * combining is not available, performance will probably be awful.
- */
-
-int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd)
-{
- return -EOPNOTSUPP;
-}
-
-void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd)
-{
-}
-
-/*
- * Perform a PIO buffer bandwidth write test, to verify proper system
- * configuration. Even when all the setup calls work, occasionally
- * BIOS or other issues can prevent write combining from working, or
- * can cause other bandwidth problems to the chip.
- *
- * This test simply writes the same buffer over and over again, and
- * measures close to the peak bandwidth to the chip (not testing
- * data bandwidth to the wire). On chips that use an address-based
- * trigger to send packets to the wire, this is easy. On chips that
- * use a count to trigger, we want to make sure that the packet doesn't
- * go out on the wire, or trigger flow control checks.
- */
-static void ipath_verify_pioperf(struct ipath_devdata *dd)
-{
- u32 pbnum, cnt, lcnt;
- u32 __iomem *piobuf;
- u32 *addr;
- u64 msecs, emsecs;
-
- piobuf = ipath_getpiobuf(dd, 0, &pbnum);
- if (!piobuf) {
- dev_info(&dd->pcidev->dev,
- "No PIObufs for checking perf, skipping\n");
- return;
- }
-
- /*
- * Enough to give us a reasonable test, less than piobuf size, and
- * likely multiple of store buffer length.
- */
- cnt = 1024;
-
- addr = vmalloc(cnt);
- if (!addr) {
- dev_info(&dd->pcidev->dev,
- "Couldn't get memory for checking PIO perf,"
- " skipping\n");
- goto done;
- }
-
- preempt_disable(); /* we want reasonably accurate elapsed time */
- msecs = 1 + jiffies_to_msecs(jiffies);
- for (lcnt = 0; lcnt < 10000U; lcnt++) {
- /* wait until we cross msec boundary */
- if (jiffies_to_msecs(jiffies) >= msecs)
- break;
- udelay(1);
- }
-
- ipath_disable_armlaunch(dd);
-
- /*
- * length 0, no dwords actually sent, and mark as VL15
- * on chips where that may matter (due to IB flowcontrol)
- */
- if ((dd->ipath_flags & IPATH_HAS_PBC_CNT))
- writeq(1UL << 63, piobuf);
- else
- writeq(0, piobuf);
- ipath_flush_wc();
-
- /*
- * this is only roughly accurate, since even with preempt we
- * still take interrupts that could take a while. Running for
- * >= 5 msec seems to get us "close enough" to accurate values
- */
- msecs = jiffies_to_msecs(jiffies);
- for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
- __iowrite32_copy(piobuf + 64, addr, cnt >> 2);
- emsecs = jiffies_to_msecs(jiffies) - msecs;
- }
-
- /* 1 GiB/sec, slightly over IB SDR line rate */
- if (lcnt < (emsecs * 1024U))
- ipath_dev_err(dd,
- "Performance problem: bandwidth to PIO buffers is "
- "only %u MiB/sec\n",
- lcnt / (u32) emsecs);
- else
- ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n",
- lcnt / (u32) emsecs);
-
- preempt_enable();
-
- vfree(addr);
-
-done:
- /* disarm piobuf, so it's available again */
- ipath_disarm_piobufs(dd, pbnum, 1);
- ipath_enable_armlaunch(dd);
-}
-
-static void cleanup_device(struct ipath_devdata *dd);
-
-static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int ret, len, j;
- struct ipath_devdata *dd;
- unsigned long long addr;
- u32 bar0 = 0, bar1 = 0;
-
-#ifdef CONFIG_X86_64
- if (pat_enabled()) {
- pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n");
- ret = -ENODEV;
- goto bail;
- }
-#endif
-
- dd = ipath_alloc_devdata(pdev);
- if (IS_ERR(dd)) {
- ret = PTR_ERR(dd);
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate devdata: error %d\n", -ret);
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);
-
- ret = pci_enable_device(pdev);
- if (ret) {
- /* This can happen iff:
- *
- * We did a chip reset, and then failed to reprogram the
- * BAR, or the chip reset due to an internal error. We then
- * unloaded the driver and reloaded it.
- *
- * Both reset cases set the BAR back to initial state. For
- * the latter case, the AER sticky error bit at offset 0x718
- * should be set, but the Linux kernel doesn't yet know
- * about that, it appears. If the original BAR was retained
- * in the kernel data structures, this may be OK.
- */
- ipath_dev_err(dd, "enable unit %d failed: error %d\n",
- dd->ipath_unit, -ret);
- goto bail_devdata;
- }
- addr = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x "
- "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
- ent->device, ent->driver_data);
-
- read_bars(dd, pdev, &bar0, &bar1);
-
- if (!bar1 && !(bar0 & ~0xf)) {
- if (addr) {
- dev_info(&pdev->dev, "BAR is 0 (probable RESET), "
- "rewriting as %llx\n", addr);
- ret = pci_write_config_dword(
- pdev, PCI_BASE_ADDRESS_0, addr);
- if (ret) {
- ipath_dev_err(dd, "rewrite of BAR0 "
- "failed: err %d\n", -ret);
- goto bail_disable;
- }
- ret = pci_write_config_dword(
- pdev, PCI_BASE_ADDRESS_1, addr >> 32);
- if (ret) {
- ipath_dev_err(dd, "rewrite of BAR1 "
- "failed: err %d\n", -ret);
- goto bail_disable;
- }
- } else {
- ipath_dev_err(dd, "BAR is 0 (probable RESET), "
- "not usable until reboot\n");
- ret = -ENODEV;
- goto bail_disable;
- }
- }
-
- ret = pci_request_regions(pdev, IPATH_DRV_NAME);
- if (ret) {
- dev_info(&pdev->dev, "pci_request_regions unit %u fails: "
- "err %d\n", dd->ipath_unit, -ret);
- goto bail_disable;
- }
-
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (ret) {
- /*
- * if the 64 bit setup fails, try 32 bit. Some systems
- * do not setup 64 bit maps on systems with 2GB or less
- * memory installed.
- */
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret) {
- dev_info(&pdev->dev,
- "Unable to set DMA mask for unit %u: %d\n",
- dd->ipath_unit, ret);
- goto bail_regions;
- }
- else {
- ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
- ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret)
- dev_info(&pdev->dev,
- "Unable to set DMA consistent mask "
- "for unit %u: %d\n",
- dd->ipath_unit, ret);
-
- }
- }
- else {
- ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (ret)
- dev_info(&pdev->dev,
- "Unable to set DMA consistent mask "
- "for unit %u: %d\n",
- dd->ipath_unit, ret);
- }
-
- pci_set_master(pdev);
-
- /*
- * Save BARs to rewrite after device reset. Save all 64 bits of
- * BAR, just in case.
- */
- dd->ipath_pcibar0 = addr;
- dd->ipath_pcibar1 = addr >> 32;
- dd->ipath_deviceid = ent->device; /* save for later use */
- dd->ipath_vendorid = ent->vendor;
-
- /* setup the chip-specific functions, as early as possible. */
- switch (ent->device) {
- case PCI_DEVICE_ID_INFINIPATH_HT:
- ipath_init_iba6110_funcs(dd);
- break;
-
- default:
- ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
- "failing\n", ent->device);
- return -ENODEV;
- }
-
- for (j = 0; j < 6; j++) {
- if (!pdev->resource[j].start)
- continue;
- ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n",
- j, &pdev->resource[j],
- (unsigned long long)pci_resource_len(pdev, j));
- }
-
- if (!addr) {
- ipath_dev_err(dd, "No valid address in BAR 0!\n");
- ret = -ENODEV;
- goto bail_regions;
- }
-
- dd->ipath_pcirev = pdev->revision;
-
-#if defined(__powerpc__)
- /* There isn't a generic way to specify writethrough mappings */
- dd->ipath_kregbase = __ioremap(addr, len,
- (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
-#else
- /* XXX: split this properly to enable on PAT */
- dd->ipath_kregbase = ioremap_nocache(addr, len);
-#endif
-
- if (!dd->ipath_kregbase) {
- ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
- addr);
- ret = -ENOMEM;
- goto bail_iounmap;
- }
- dd->ipath_kregend = (u64 __iomem *)
- ((void __iomem *)dd->ipath_kregbase + len);
- dd->ipath_physaddr = addr; /* used for io_remap, etc. */
- /* for user mmap */
- ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
- addr, dd->ipath_kregbase);
-
- if (dd->ipath_f_bus(dd, pdev))
- ipath_dev_err(dd, "Failed to setup config space; "
- "continuing anyway\n");
-
- /*
- * set up our interrupt handler; IRQF_SHARED probably not needed,
- * since MSI interrupts shouldn't be shared but won't hurt for now.
- * check 0 irq after we return from chip-specific bus setup, since
- * that can affect this due to setup
- */
- if (!dd->ipath_irq)
- ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
- "work\n");
- else {
- ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
- IPATH_DRV_NAME, dd);
- if (ret) {
- ipath_dev_err(dd, "Couldn't setup irq handler, "
- "irq=%d: %d\n", dd->ipath_irq, ret);
- goto bail_iounmap;
- }
- }
-
- ret = ipath_init_chip(dd, 0); /* do the chip-specific init */
- if (ret)
- goto bail_irqsetup;
-
- ret = ipath_enable_wc(dd);
-
- if (ret)
- ret = 0;
-
- ipath_verify_pioperf(dd);
-
- ipath_device_create_group(&pdev->dev, dd);
- ipathfs_add_device(dd);
- ipath_user_add(dd);
- ipath_diag_add(dd);
- ipath_register_ib_device(dd);
-
- goto bail;
-
-bail_irqsetup:
- cleanup_device(dd);
-
- if (dd->ipath_irq)
- dd->ipath_f_free_irq(dd);
-
- if (dd->ipath_f_cleanup)
- dd->ipath_f_cleanup(dd);
-
-bail_iounmap:
- iounmap((volatile void __iomem *) dd->ipath_kregbase);
-
-bail_regions:
- pci_release_regions(pdev);
-
-bail_disable:
- pci_disable_device(pdev);
-
-bail_devdata:
- ipath_free_devdata(pdev, dd);
-
-bail:
- return ret;
-}
-
-static void cleanup_device(struct ipath_devdata *dd)
-{
- int port;
- struct ipath_portdata **tmp;
- unsigned long flags;
-
- if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
- /* can't do anything more with chip; needs re-init */
- *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
- if (dd->ipath_kregbase) {
- /*
- * if we haven't already cleaned up before these are
- * to ensure any register reads/writes "fail" until
- * re-init
- */
- dd->ipath_kregbase = NULL;
- dd->ipath_uregbase = 0;
- dd->ipath_sregbase = 0;
- dd->ipath_cregbase = 0;
- dd->ipath_kregsize = 0;
- }
- ipath_disable_wc(dd);
- }
-
- if (dd->ipath_spectriggerhit)
- dev_info(&dd->pcidev->dev, "%lu special trigger hits\n",
- dd->ipath_spectriggerhit);
-
- if (dd->ipath_pioavailregs_dma) {
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- (void *) dd->ipath_pioavailregs_dma,
- dd->ipath_pioavailregs_phys);
- dd->ipath_pioavailregs_dma = NULL;
- }
- if (dd->ipath_dummy_hdrq) {
- dma_free_coherent(&dd->pcidev->dev,
- dd->ipath_pd[0]->port_rcvhdrq_size,
- dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
- dd->ipath_dummy_hdrq = NULL;
- }
-
- if (dd->ipath_pageshadow) {
- struct page **tmpp = dd->ipath_pageshadow;
- dma_addr_t *tmpd = dd->ipath_physshadow;
- int i, cnt = 0;
-
- ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
- "locked\n");
- for (port = 0; port < dd->ipath_cfgports; port++) {
- int port_tidbase = port * dd->ipath_rcvtidcnt;
- int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
- for (i = port_tidbase; i < maxtid; i++) {
- if (!tmpp[i])
- continue;
- pci_unmap_page(dd->pcidev, tmpd[i],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages(&tmpp[i], 1);
- tmpp[i] = NULL;
- cnt++;
- }
- }
- if (cnt) {
- ipath_stats.sps_pageunlocks += cnt;
- ipath_cdbg(VERBOSE, "There were still %u expTID "
- "entries locked\n", cnt);
- }
- if (ipath_stats.sps_pagelocks ||
- ipath_stats.sps_pageunlocks)
- ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
- "unlocked via ipath_m{un}lock\n",
- (unsigned long long)
- ipath_stats.sps_pagelocks,
- (unsigned long long)
- ipath_stats.sps_pageunlocks);
-
- ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
- dd->ipath_pageshadow);
- tmpp = dd->ipath_pageshadow;
- dd->ipath_pageshadow = NULL;
- vfree(tmpp);
-
- dd->ipath_egrtidbase = NULL;
- }
-
- /*
- * free any resources still in use (usually just kernel ports)
- * at unload; we do for portcnt, because that's what we allocate.
- * We acquire lock to be really paranoid that ipath_pd isn't being
- * accessed from some interrupt-related code (that should not happen,
- * but best to be sure).
- */
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- tmp = dd->ipath_pd;
- dd->ipath_pd = NULL;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- for (port = 0; port < dd->ipath_portcnt; port++) {
- struct ipath_portdata *pd = tmp[port];
- tmp[port] = NULL; /* debugging paranoia */
- ipath_free_pddata(dd, pd);
- }
- kfree(tmp);
-}
-
-static void ipath_remove_one(struct pci_dev *pdev)
-{
- struct ipath_devdata *dd = pci_get_drvdata(pdev);
-
- ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);
-
- /*
- * disable the IB link early, to be sure no new packets arrive, which
- * complicates the shutdown process
- */
- ipath_shutdown_device(dd);
-
- flush_workqueue(ib_wq);
-
- if (dd->verbs_dev)
- ipath_unregister_ib_device(dd->verbs_dev);
-
- ipath_diag_remove(dd);
- ipath_user_remove(dd);
- ipathfs_remove_device(dd);
- ipath_device_remove_group(&pdev->dev, dd);
-
- ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
- "unit %u\n", dd, (u32) dd->ipath_unit);
-
- cleanup_device(dd);
-
- /*
- * turn off rcv, send, and interrupts for all ports, all drivers
- * should also hard reset the chip here?
- * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
- * for all versions of the driver, if they were allocated
- */
- if (dd->ipath_irq) {
- ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
- dd->ipath_unit, dd->ipath_irq);
- dd->ipath_f_free_irq(dd);
- } else
- ipath_dbg("irq is 0, not doing free_irq "
- "for unit %u\n", dd->ipath_unit);
- /*
- * we check for NULL here, because it's outside
- * the kregbase check, and we need to call it
- * after the free_irq. Thus it's possible that
- * the function pointers were never initialized.
- */
- if (dd->ipath_f_cleanup)
- /* clean up chip-specific stuff */
- dd->ipath_f_cleanup(dd);
-
- ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
- iounmap((volatile void __iomem *) dd->ipath_kregbase);
- pci_release_regions(pdev);
- ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
- pci_disable_device(pdev);
-
- ipath_free_devdata(pdev, dd);
-}
-
-/* general driver use */
-DEFINE_MUTEX(ipath_mutex);
-
-static DEFINE_SPINLOCK(ipath_pioavail_lock);
-
-/**
- * ipath_disarm_piobufs - cancel a range of PIO buffers
- * @dd: the infinipath device
- * @first: the first PIO buffer to cancel
- * @cnt: the number of PIO buffers to cancel
- *
- * cancel a range of PIO buffers, used when they might be armed, but
- * not triggered. Used at init to ensure buffer state, and also user
- * process close, in case it died while writing to a PIO buffer
- * Also after errors.
- */
-void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first,
- unsigned cnt)
-{
- unsigned i, last = first + cnt;
- unsigned long flags;
-
- ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first);
- for (i = first; i < last; i++) {
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /*
- * The disarm-related bits are write-only, so it
- * is ok to OR them in with our copy of sendctrl
- * while we hold the lock.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl | INFINIPATH_S_DISARM |
- (i << INFINIPATH_S_DISARMPIOBUF_SHIFT));
- /* can't disarm bufs back-to-back per iba7220 spec */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
- /* on some older chips, update may not happen after cancel */
- ipath_force_pio_avail_update(dd);
-}
-
-/**
- * ipath_wait_linkstate - wait for an IB link state change to occur
- * @dd: the infinipath device
- * @state: the state to wait for
- * @msecs: the number of milliseconds to wait
- *
- * wait up to msecs milliseconds for IB link state change to occur for
- * now, take the easy polling route. Currently used only by
- * ipath_set_linkstate. Returns 0 if state reached, otherwise
- * -ETIMEDOUT state can have multiple states set, for any of several
- * transitions.
- */
-int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
-{
- dd->ipath_state_wanted = state;
- wait_event_interruptible_timeout(ipath_state_wait,
- (dd->ipath_flags & state),
- msecs_to_jiffies(msecs));
- dd->ipath_state_wanted = 0;
-
- if (!(dd->ipath_flags & state)) {
- u64 val;
- ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
- " ms\n",
- /* test INIT ahead of DOWN, both can be set */
- (state & IPATH_LINKINIT) ? "INIT" :
- ((state & IPATH_LINKDOWN) ? "DOWN" :
- ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
- msecs);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n",
- (unsigned long long) ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_ibcctrl),
- (unsigned long long) val,
- ipath_ibcstatus_str[val & dd->ibcs_lts_mask]);
- }
- return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
-}
-
-static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
- char *buf, size_t blen)
-{
- static const struct {
- ipath_err_t err;
- const char *msg;
- } errs[] = {
- { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
- { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
- { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
- { INFINIPATH_E_SDMABASE, "SDmaBase" },
- { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
- { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
- { INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
- { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
- { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
- { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
- { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
- { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
- };
- int i;
- int expected;
- size_t bidx = 0;
-
- for (i = 0; i < ARRAY_SIZE(errs); i++) {
- expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
- test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- if ((err & errs[i].err) && !expected)
- bidx += snprintf(buf + bidx, blen - bidx,
- "%s ", errs[i].msg);
- }
-}
-
-/*
- * Decode the error status into strings, deciding whether to always
- * print * it or not depending on "normal packet errors" vs everything
- * else. Return 1 if "real" errors, otherwise 0 if only packet
- * errors, so caller can decide what to print with the string.
- */
-int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
- ipath_err_t err)
-{
- int iserr = 1;
- *buf = '\0';
- if (err & INFINIPATH_E_PKTERRS) {
- if (!(err & ~INFINIPATH_E_PKTERRS))
- iserr = 0; // if only packet errors.
- if (ipath_debug & __IPATH_ERRPKTDBG) {
- if (err & INFINIPATH_E_REBP)
- strlcat(buf, "EBP ", blen);
- if (err & INFINIPATH_E_RVCRC)
- strlcat(buf, "VCRC ", blen);
- if (err & INFINIPATH_E_RICRC) {
- strlcat(buf, "CRC ", blen);
- // clear for check below, so only once
- err &= INFINIPATH_E_RICRC;
- }
- if (err & INFINIPATH_E_RSHORTPKTLEN)
- strlcat(buf, "rshortpktlen ", blen);
- if (err & INFINIPATH_E_SDROPPEDDATAPKT)
- strlcat(buf, "sdroppeddatapkt ", blen);
- if (err & INFINIPATH_E_SPKTLEN)
- strlcat(buf, "spktlen ", blen);
- }
- if ((err & INFINIPATH_E_RICRC) &&
- !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP)))
- strlcat(buf, "CRC ", blen);
- if (!iserr)
- goto done;
- }
- if (err & INFINIPATH_E_RHDRLEN)
- strlcat(buf, "rhdrlen ", blen);
- if (err & INFINIPATH_E_RBADTID)
- strlcat(buf, "rbadtid ", blen);
- if (err & INFINIPATH_E_RBADVERSION)
- strlcat(buf, "rbadversion ", blen);
- if (err & INFINIPATH_E_RHDR)
- strlcat(buf, "rhdr ", blen);
- if (err & INFINIPATH_E_SENDSPECIALTRIGGER)
- strlcat(buf, "sendspecialtrigger ", blen);
- if (err & INFINIPATH_E_RLONGPKTLEN)
- strlcat(buf, "rlongpktlen ", blen);
- if (err & INFINIPATH_E_RMAXPKTLEN)
- strlcat(buf, "rmaxpktlen ", blen);
- if (err & INFINIPATH_E_RMINPKTLEN)
- strlcat(buf, "rminpktlen ", blen);
- if (err & INFINIPATH_E_SMINPKTLEN)
- strlcat(buf, "sminpktlen ", blen);
- if (err & INFINIPATH_E_RFORMATERR)
- strlcat(buf, "rformaterr ", blen);
- if (err & INFINIPATH_E_RUNSUPVL)
- strlcat(buf, "runsupvl ", blen);
- if (err & INFINIPATH_E_RUNEXPCHAR)
- strlcat(buf, "runexpchar ", blen);
- if (err & INFINIPATH_E_RIBFLOW)
- strlcat(buf, "ribflow ", blen);
- if (err & INFINIPATH_E_SUNDERRUN)
- strlcat(buf, "sunderrun ", blen);
- if (err & INFINIPATH_E_SPIOARMLAUNCH)
- strlcat(buf, "spioarmlaunch ", blen);
- if (err & INFINIPATH_E_SUNEXPERRPKTNUM)
- strlcat(buf, "sunexperrpktnum ", blen);
- if (err & INFINIPATH_E_SDROPPEDSMPPKT)
- strlcat(buf, "sdroppedsmppkt ", blen);
- if (err & INFINIPATH_E_SMAXPKTLEN)
- strlcat(buf, "smaxpktlen ", blen);
- if (err & INFINIPATH_E_SUNSUPVL)
- strlcat(buf, "sunsupVL ", blen);
- if (err & INFINIPATH_E_INVALIDADDR)
- strlcat(buf, "invalidaddr ", blen);
- if (err & INFINIPATH_E_RRCVEGRFULL)
- strlcat(buf, "rcvegrfull ", blen);
- if (err & INFINIPATH_E_RRCVHDRFULL)
- strlcat(buf, "rcvhdrfull ", blen);
- if (err & INFINIPATH_E_IBSTATUSCHANGED)
- strlcat(buf, "ibcstatuschg ", blen);
- if (err & INFINIPATH_E_RIBLOSTLINK)
- strlcat(buf, "riblostlink ", blen);
- if (err & INFINIPATH_E_HARDWARE)
- strlcat(buf, "hardware ", blen);
- if (err & INFINIPATH_E_RESET)
- strlcat(buf, "reset ", blen);
- if (err & INFINIPATH_E_SDMAERRS)
- decode_sdma_errs(dd, err, buf, blen);
- if (err & INFINIPATH_E_INVALIDEEPCMD)
- strlcat(buf, "invalideepromcmd ", blen);
-done:
- return iserr;
-}
-
-/**
- * get_rhf_errstring - decode RHF errors
- * @err: the err number
- * @msg: the output buffer
- * @len: the length of the output buffer
- *
- * only used one place now, may want more later
- */
-static void get_rhf_errstring(u32 err, char *msg, size_t len)
-{
- /* if no errors, and so don't need to check what's first */
- *msg = '\0';
-
- if (err & INFINIPATH_RHF_H_ICRCERR)
- strlcat(msg, "icrcerr ", len);
- if (err & INFINIPATH_RHF_H_VCRCERR)
- strlcat(msg, "vcrcerr ", len);
- if (err & INFINIPATH_RHF_H_PARITYERR)
- strlcat(msg, "parityerr ", len);
- if (err & INFINIPATH_RHF_H_LENERR)
- strlcat(msg, "lenerr ", len);
- if (err & INFINIPATH_RHF_H_MTUERR)
- strlcat(msg, "mtuerr ", len);
- if (err & INFINIPATH_RHF_H_IHDRERR)
- /* infinipath hdr checksum error */
- strlcat(msg, "ipathhdrerr ", len);
- if (err & INFINIPATH_RHF_H_TIDERR)
- strlcat(msg, "tiderr ", len);
- if (err & INFINIPATH_RHF_H_MKERR)
- /* bad port, offset, etc. */
- strlcat(msg, "invalid ipathhdr ", len);
- if (err & INFINIPATH_RHF_H_IBERR)
- strlcat(msg, "iberr ", len);
- if (err & INFINIPATH_RHF_L_SWA)
- strlcat(msg, "swA ", len);
- if (err & INFINIPATH_RHF_L_SWB)
- strlcat(msg, "swB ", len);
-}
-
-/**
- * ipath_get_egrbuf - get an eager buffer
- * @dd: the infinipath device
- * @bufnum: the eager buffer to get
- *
- * must only be called if ipath_pd[port] is known to be allocated
- */
-static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum)
-{
- return dd->ipath_port0_skbinfo ?
- (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
-}
-
-/**
- * ipath_alloc_skb - allocate an skb and buffer with possible constraints
- * @dd: the infinipath device
- * @gfp_mask: the sk_buff SFP mask
- */
-struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd,
- gfp_t gfp_mask)
-{
- struct sk_buff *skb;
- u32 len;
-
- /*
- * Only fully supported way to handle this is to allocate lots
- * extra, align as needed, and then do skb_reserve(). That wastes
- * a lot of memory... I'll have to hack this into infinipath_copy
- * also.
- */
-
- /*
- * We need 2 extra bytes for ipath_ether data sent in the
- * key header. In order to keep everything dword aligned,
- * we'll reserve 4 bytes.
- */
- len = dd->ipath_ibmaxlen + 4;
-
- if (dd->ipath_flags & IPATH_4BYTE_TID) {
- /* We need a 2KB multiple alignment, and there is no way
- * to do it except to allocate extra and then skb_reserve
- * enough to bring it up to the right alignment.
- */
- len += 2047;
- }
-
- skb = __dev_alloc_skb(len, gfp_mask);
- if (!skb) {
- ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
- len);
- goto bail;
- }
-
- skb_reserve(skb, 4);
-
- if (dd->ipath_flags & IPATH_4BYTE_TID) {
- u32 una = (unsigned long)skb->data & 2047;
- if (una)
- skb_reserve(skb, 2048 - una);
- }
-
-bail:
- return skb;
-}
-
-static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
- u32 eflags,
- u32 l,
- u32 etail,
- __le32 *rhf_addr,
- struct ipath_message_header *hdr)
-{
- char emsg[128];
-
- get_rhf_errstring(eflags, emsg, sizeof emsg);
- ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
- "tlen=%x opcode=%x egridx=%x: %s\n",
- eflags, l,
- ipath_hdrget_rcv_type(rhf_addr),
- ipath_hdrget_length_in_bytes(rhf_addr),
- be32_to_cpu(hdr->bth[0]) >> 24,
- etail, emsg);
-
- /* Count local link integrity errors. */
- if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) {
- u8 n = (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
-
- if (++dd->ipath_lli_counter > n) {
- dd->ipath_lli_counter = 0;
- dd->ipath_lli_errors++;
- }
- }
-}
-
-/*
- * ipath_kreceive - receive a packet
- * @pd: the infinipath port
- *
- * called from interrupt handler for errors or receive interrupt
- */
-void ipath_kreceive(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- __le32 *rhf_addr;
- void *ebuf;
- const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
- const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
- u32 etail = -1, l, hdrqtail;
- struct ipath_message_header *hdr;
- u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0;
- static u64 totcalls; /* stats, may eventually remove */
- int last;
-
- l = pd->port_head;
- rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset;
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- u32 seq = ipath_hdrget_seq(rhf_addr);
-
- if (seq != pd->port_seq_cnt)
- goto bail;
- hdrqtail = 0;
- } else {
- hdrqtail = ipath_get_rcvhdrtail(pd);
- if (l == hdrqtail)
- goto bail;
- smp_rmb();
- }
-
-reloop:
- for (last = 0, i = 1; !last; i += !last) {
- hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
- eflags = ipath_hdrget_err_flags(rhf_addr);
- etype = ipath_hdrget_rcv_type(rhf_addr);
- /* total length */
- tlen = ipath_hdrget_length_in_bytes(rhf_addr);
- ebuf = NULL;
- if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ?
- ipath_hdrget_use_egr_buf(rhf_addr) :
- (etype != RCVHQ_RCV_TYPE_EXPECTED)) {
- /*
- * It turns out that the chip uses an eager buffer
- * for all non-expected packets, whether it "needs"
- * one or not. So always get the index, but don't
- * set ebuf (so we try to copy data) unless the
- * length requires it.
- */
- etail = ipath_hdrget_index(rhf_addr);
- updegr = 1;
- if (tlen > sizeof(*hdr) ||
- etype == RCVHQ_RCV_TYPE_NON_KD)
- ebuf = ipath_get_egrbuf(dd, etail);
- }
-
- /*
- * both tiderr and ipathhdrerr are set for all plain IB
- * packets; only ipathhdrerr should be set.
- */
-
- if (etype != RCVHQ_RCV_TYPE_NON_KD &&
- etype != RCVHQ_RCV_TYPE_ERROR &&
- ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) !=
- IPS_PROTO_VERSION)
- ipath_cdbg(PKT, "Bad InfiniPath protocol version "
- "%x\n", etype);
-
- if (unlikely(eflags))
- ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr);
- else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
- ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen);
- if (dd->ipath_lli_counter)
- dd->ipath_lli_counter--;
- } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
- u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24;
- u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff;
- ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
- "qp=%x), len %x; ignored\n",
- etype, opcode, qp, tlen);
- }
- else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
- ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
- be32_to_cpu(hdr->bth[0]) >> 24);
- else {
- /*
- * error packet, type of error unknown.
- * Probably type 3, but we don't know, so don't
- * even try to print the opcode, etc.
- * Usually caused by a "bad packet", that has no
- * BTH, when the LRH says it should.
- */
- ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
- " %x, len %x hdrq+%x rhf: %Lx\n",
- etail, tlen, l, (unsigned long long)
- le64_to_cpu(*(__le64 *) rhf_addr));
- if (ipath_debug & __IPATH_ERRPKTDBG) {
- u32 j, *d, dw = rsize-2;
- if (rsize > (tlen>>2))
- dw = tlen>>2;
- d = (u32 *)hdr;
- printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n",
- dw);
- for (j = 0; j < dw; j++)
- printk(KERN_DEBUG "%8x%s", d[j],
- (j%8) == 7 ? "\n" : " ");
- printk(KERN_DEBUG ".\n");
- }
- }
- l += rsize;
- if (l >= maxcnt)
- l = 0;
- rhf_addr = (__le32 *) pd->port_rcvhdrq +
- l + dd->ipath_rhf_offset;
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- u32 seq = ipath_hdrget_seq(rhf_addr);
-
- if (++pd->port_seq_cnt > 13)
- pd->port_seq_cnt = 1;
- if (seq != pd->port_seq_cnt)
- last = 1;
- } else if (l == hdrqtail)
- last = 1;
- /*
- * update head regs on last packet, and every 16 packets.
- * Reduce bus traffic, while still trying to prevent
- * rcvhdrq overflows, for when the queue is nearly full
- */
- if (last || !(i & 0xf)) {
- u64 lval = l;
-
- /* request IBA6120 and 7220 interrupt only on last */
- if (last)
- lval |= dd->ipath_rhdrhead_intr_off;
- ipath_write_ureg(dd, ur_rcvhdrhead, lval,
- pd->port_port);
- if (updegr) {
- ipath_write_ureg(dd, ur_rcvegrindexhead,
- etail, pd->port_port);
- updegr = 0;
- }
- }
- }
-
- if (!dd->ipath_rhdrhead_intr_off && !reloop &&
- !(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- /* IBA6110 workaround; we can have a race clearing chip
- * interrupt with another interrupt about to be delivered,
- * and can clear it before it is delivered on the GPIO
- * workaround. By doing the extra check here for the
- * in-memory tail register updating while we were doing
- * earlier packets, we "almost" guarantee we have covered
- * that case.
- */
- u32 hqtail = ipath_get_rcvhdrtail(pd);
- if (hqtail != hdrqtail) {
- hdrqtail = hqtail;
- reloop = 1; /* loop 1 extra time at most */
- goto reloop;
- }
- }
-
- pkttot += i;
-
- pd->port_head = l;
-
- if (pkttot > ipath_stats.sps_maxpkts_call)
- ipath_stats.sps_maxpkts_call = pkttot;
- ipath_stats.sps_port0pkts += pkttot;
- ipath_stats.sps_avgpkts_call =
- ipath_stats.sps_port0pkts / ++totcalls;
-
-bail:;
-}
-
-/**
- * ipath_update_pio_bufs - update shadow copy of the PIO availability map
- * @dd: the infinipath device
- *
- * called whenever our local copy indicates we have run out of send buffers
- * NOTE: This can be called from interrupt context by some code
- * and from non-interrupt context by ipath_getpiobuf().
- */
-
-static void ipath_update_pio_bufs(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int i;
- const unsigned piobregs = (unsigned)dd->ipath_pioavregs;
-
- /* If the generation (check) bits have changed, then we update the
- * busy bit for the corresponding PIO buffer. This algorithm will
- * modify positions to the value they already have in some cases
- * (i.e., no change), but it's faster than changing only the bits
- * that have changed.
- *
- * We would like to do this atomicly, to avoid spinlocks in the
- * critical send path, but that's not really possible, given the
- * type of changes, and that this routine could be called on
- * multiple cpu's simultaneously, so we lock in this routine only,
- * to avoid conflicting updates; all we change is the shadow, and
- * it's a single 64 bit memory location, so by definition the update
- * is atomic in terms of what other cpu's can see in testing the
- * bits. The spin_lock overhead isn't too bad, since it only
- * happens when all buffers are in use, so only cpu overhead, not
- * latency or bandwidth is affected.
- */
- if (!dd->ipath_pioavailregs_dma) {
- ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
- return;
- }
- if (ipath_debug & __IPATH_VERBDBG) {
- /* only if packet debug and verbose */
- volatile __le64 *dma = dd->ipath_pioavailregs_dma;
- unsigned long *shadow = dd->ipath_pioavailshadow;
-
- ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, "
- "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx "
- "s3=%lx\n",
- (unsigned long long) le64_to_cpu(dma[0]),
- shadow[0],
- (unsigned long long) le64_to_cpu(dma[1]),
- shadow[1],
- (unsigned long long) le64_to_cpu(dma[2]),
- shadow[2],
- (unsigned long long) le64_to_cpu(dma[3]),
- shadow[3]);
- if (piobregs > 4)
- ipath_cdbg(
- PKT, "2nd group, dma4=%llx shad4=%lx, "
- "d5=%llx s5=%lx, d6=%llx s6=%lx, "
- "d7=%llx s7=%lx\n",
- (unsigned long long) le64_to_cpu(dma[4]),
- shadow[4],
- (unsigned long long) le64_to_cpu(dma[5]),
- shadow[5],
- (unsigned long long) le64_to_cpu(dma[6]),
- shadow[6],
- (unsigned long long) le64_to_cpu(dma[7]),
- shadow[7]);
- }
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (i = 0; i < piobregs; i++) {
- u64 pchbusy, pchg, piov, pnew;
- /*
- * Chip Errata: bug 6641; even and odd qwords>3 are swapped
- */
- if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]);
- else
- piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
- pchg = dd->ipath_pioavailkernel[i] &
- ~(dd->ipath_pioavailshadow[i] ^ piov);
- pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
- if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
- pnew = dd->ipath_pioavailshadow[i] & ~pchbusy;
- pnew |= piov & pchbusy;
- dd->ipath_pioavailshadow[i] = pnew;
- }
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-}
-
-/*
- * used to force update of pioavailshadow if we can't get a pio buffer.
- * Needed primarily due to exitting freeze mode after recovering
- * from errors. Done lazily, because it's safer (known to not
- * be writing pio buffers).
- */
-static void ipath_reset_availshadow(struct ipath_devdata *dd)
-{
- int i, im;
- unsigned long flags;
-
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- u64 val, oldval;
- /* deal with 6110 chip bug on high register #s */
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
- /*
- * busy out the buffers not in the kernel avail list,
- * without changing the generation bits.
- */
- oldval = dd->ipath_pioavailshadow[i];
- dd->ipath_pioavailshadow[i] = val |
- ((~dd->ipath_pioavailkernel[i] <<
- INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
- 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
- if (oldval != dd->ipath_pioavailshadow[i])
- ipath_dbg("shadow[%d] was %Lx, now %lx\n",
- i, (unsigned long long) oldval,
- dd->ipath_pioavailshadow[i]);
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-}
-
-/**
- * ipath_setrcvhdrsize - set the receive header size
- * @dd: the infinipath device
- * @rhdrsize: the receive header size
- *
- * called from user init code, and also layered driver init
- */
-int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize)
-{
- int ret = 0;
-
- if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) {
- if (dd->ipath_rcvhdrsize != rhdrsize) {
- dev_info(&dd->pcidev->dev,
- "Error: can't set protocol header "
- "size %u, already %u\n",
- rhdrsize, dd->ipath_rcvhdrsize);
- ret = -EAGAIN;
- } else
- ipath_cdbg(VERBOSE, "Reuse same protocol header "
- "size %u\n", dd->ipath_rcvhdrsize);
- } else if (rhdrsize > (dd->ipath_rcvhdrentsize -
- (sizeof(u64) / sizeof(u32)))) {
- ipath_dbg("Error: can't set protocol header size %u "
- "(> max %u)\n", rhdrsize,
- dd->ipath_rcvhdrentsize -
- (u32) (sizeof(u64) / sizeof(u32)));
- ret = -EOVERFLOW;
- } else {
- dd->ipath_flags |= IPATH_RCVHDRSZ_SET;
- dd->ipath_rcvhdrsize = rhdrsize;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
- dd->ipath_rcvhdrsize);
- ipath_cdbg(VERBOSE, "Set protocol header size to %u\n",
- dd->ipath_rcvhdrsize);
- }
- return ret;
-}
-
-/*
- * debugging code and stats updates if no pio buffers available.
- */
-static noinline void no_pio_bufs(struct ipath_devdata *dd)
-{
- unsigned long *shadow = dd->ipath_pioavailshadow;
- __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma;
-
- dd->ipath_upd_pio_shadow = 1;
-
- /*
- * not atomic, but if we lose a stat count in a while, that's OK
- */
- ipath_stats.sps_nopiobufs++;
- if (!(++dd->ipath_consec_nopiobuf % 100000)) {
- ipath_force_pio_avail_update(dd); /* at start */
- ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
- "%llx %llx %llx %llx\n"
- "ipath shadow: %lx %lx %lx %lx\n",
- dd->ipath_consec_nopiobuf,
- (unsigned long)get_cycles(),
- (unsigned long long) le64_to_cpu(dma[0]),
- (unsigned long long) le64_to_cpu(dma[1]),
- (unsigned long long) le64_to_cpu(dma[2]),
- (unsigned long long) le64_to_cpu(dma[3]),
- shadow[0], shadow[1], shadow[2], shadow[3]);
- /*
- * 4 buffers per byte, 4 registers above, cover rest
- * below
- */
- if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
- (sizeof(shadow[0]) * 4 * 4))
- ipath_dbg("2nd group: dmacopy: "
- "%llx %llx %llx %llx\n"
- "ipath shadow: %lx %lx %lx %lx\n",
- (unsigned long long)le64_to_cpu(dma[4]),
- (unsigned long long)le64_to_cpu(dma[5]),
- (unsigned long long)le64_to_cpu(dma[6]),
- (unsigned long long)le64_to_cpu(dma[7]),
- shadow[4], shadow[5], shadow[6], shadow[7]);
-
- /* at end, so update likely happened */
- ipath_reset_availshadow(dd);
- }
-}
-
-/*
- * common code for normal driver pio buffer allocation, and reserved
- * allocation.
- *
- * do appropriate marking as busy, etc.
- * returns buffer number if one found (>=0), negative number is error.
- */
-static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd,
- u32 *pbufnum, u32 first, u32 last, u32 firsti)
-{
- int i, j, updated = 0;
- unsigned piobcnt;
- unsigned long flags;
- unsigned long *shadow = dd->ipath_pioavailshadow;
- u32 __iomem *buf;
-
- piobcnt = last - first;
- if (dd->ipath_upd_pio_shadow) {
- /*
- * Minor optimization. If we had no buffers on last call,
- * start out by doing the update; continue and do scan even
- * if no buffers were updated, to be paranoid
- */
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- } else
- i = firsti;
-rescan:
- /*
- * while test_and_set_bit() is atomic, we do that and then the
- * change_bit(), and the pair is not. See if this is the cause
- * of the remaining armlaunch errors.
- */
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (j = 0; j < piobcnt; j++, i++) {
- if (i >= last)
- i = first;
- if (__test_and_set_bit((2 * i) + 1, shadow))
- continue;
- /* flip generation bit */
- __change_bit(2 * i, shadow);
- break;
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-
- if (j == piobcnt) {
- if (!updated) {
- /*
- * first time through; shadow exhausted, but may be
- * buffers available, try an update and then rescan.
- */
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- goto rescan;
- } else if (updated == 1 && piobcnt <=
- ((dd->ipath_sendctrl
- >> INFINIPATH_S_UPDTHRESH_SHIFT) &
- INFINIPATH_S_UPDTHRESH_MASK)) {
- /*
- * for chips supporting and using the update
- * threshold we need to force an update of the
- * in-memory copy if the count is less than the
- * thershold, then check one more time.
- */
- ipath_force_pio_avail_update(dd);
- ipath_update_pio_bufs(dd);
- updated++;
- i = first;
- goto rescan;
- }
-
- no_pio_bufs(dd);
- buf = NULL;
- } else {
- if (i < dd->ipath_piobcnt2k)
- buf = (u32 __iomem *) (dd->ipath_pio2kbase +
- i * dd->ipath_palign);
- else
- buf = (u32 __iomem *)
- (dd->ipath_pio4kbase +
- (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
- if (pbufnum)
- *pbufnum = i;
- }
-
- return buf;
-}
-
-/**
- * ipath_getpiobuf - find an available pio buffer
- * @dd: the infinipath device
- * @plen: the size of the PIO buffer needed in 32-bit words
- * @pbufnum: the buffer number is placed here
- */
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum)
-{
- u32 __iomem *buf;
- u32 pnum, nbufs;
- u32 first, lasti;
-
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS) {
- first = dd->ipath_piobcnt2k;
- lasti = dd->ipath_lastpioindexl;
- } else {
- first = 0;
- lasti = dd->ipath_lastpioindex;
- }
- nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti);
-
- if (buf) {
- /*
- * Set next starting place. It's just an optimization,
- * it doesn't matter who wins on this, so no locking
- */
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
- dd->ipath_lastpioindexl = pnum + 1;
- else
- dd->ipath_lastpioindex = pnum + 1;
- if (dd->ipath_upd_pio_shadow)
- dd->ipath_upd_pio_shadow = 0;
- if (dd->ipath_consec_nopiobuf)
- dd->ipath_consec_nopiobuf = 0;
- ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
- pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf);
- if (pbufnum)
- *pbufnum = pnum;
-
- }
- return buf;
-}
-
-/**
- * ipath_chg_pioavailkernel - change which send buffers are available for kernel
- * @dd: the infinipath device
- * @start: the starting send buffer number
- * @len: the number of send buffers
- * @avail: true if the buffers are available for kernel use, false otherwise
- */
-void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
- unsigned len, int avail)
-{
- unsigned long flags;
- unsigned end, cnt = 0;
-
- /* There are two bits per send buffer (busy and generation) */
- start *= 2;
- end = start + len * 2;
-
- spin_lock_irqsave(&ipath_pioavail_lock, flags);
- /* Set or clear the busy bit in the shadow. */
- while (start < end) {
- if (avail) {
- unsigned long dma;
- int i, im;
- /*
- * the BUSY bit will never be set, because we disarm
- * the user buffers before we hand them back to the
- * kernel. We do have to make sure the generation
- * bit is set correctly in shadow, since it could
- * have changed many times while allocated to user.
- * We can't use the bitmap functions on the full
- * dma array because it is always little-endian, so
- * we have to flip to host-order first.
- * BITS_PER_LONG is slightly wrong, since it's
- * always 64 bits per register in chip...
- * We only work on 64 bit kernels, so that's OK.
- */
- /* deal with 6110 chip bug on high register #s */
- i = start / BITS_PER_LONG;
- im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
- i ^ 1 : i;
- __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
- + start, dd->ipath_pioavailshadow);
- dma = (unsigned long) le64_to_cpu(
- dd->ipath_pioavailregs_dma[im]);
- if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start) % BITS_PER_LONG, &dma))
- __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start, dd->ipath_pioavailshadow);
- else
- __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
- + start, dd->ipath_pioavailshadow);
- __set_bit(start, dd->ipath_pioavailkernel);
- } else {
- __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
- dd->ipath_pioavailshadow);
- __clear_bit(start, dd->ipath_pioavailkernel);
- }
- start += 2;
- }
-
- if (dd->ipath_pioupd_thresh) {
- end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
- cnt = bitmap_weight(dd->ipath_pioavailkernel, end);
- }
- spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
-
- /*
- * When moving buffers from kernel to user, if number assigned to
- * the user is less than the pio update threshold, and threshold
- * is supported (cnt was computed > 0), drop the update threshold
- * so we update at least once per allocated number of buffers.
- * In any case, if the kernel buffers are less than the threshold,
- * drop the threshold. We don't bother increasing it, having once
- * decreased it, since it would typically just cycle back and forth.
- * If we don't decrease below buffers in use, we can wait a long
- * time for an update, until some other context uses PIO buffers.
- */
- if (!avail && len < cnt)
- cnt = len;
- if (cnt < dd->ipath_pioupd_thresh) {
- dd->ipath_pioupd_thresh = cnt;
- ipath_dbg("Decreased pio update threshold to %u\n",
- dd->ipath_pioupd_thresh);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
- << INFINIPATH_S_UPDTHRESH_SHIFT);
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-}
-
-/**
- * ipath_create_rcvhdrq - create a receive header queue
- * @dd: the infinipath device
- * @pd: the port data
- *
- * this must be contiguous memory (from an i/o perspective), and must be
- * DMA'able (which means for some systems, it will go through an IOMMU,
- * or be forced into a low address range).
- */
-int ipath_create_rcvhdrq(struct ipath_devdata *dd,
- struct ipath_portdata *pd)
-{
- int ret = 0;
-
- if (!pd->port_rcvhdrq) {
- dma_addr_t phys_hdrqtail;
- gfp_t gfp_flags = GFP_USER | __GFP_COMP;
- int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE);
-
- pd->port_rcvhdrq = dma_alloc_coherent(
- &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
- gfp_flags);
-
- if (!pd->port_rcvhdrq) {
- ipath_dev_err(dd, "attempt to allocate %d bytes "
- "for port %u rcvhdrq failed\n",
- amt, pd->port_port);
- ret = -ENOMEM;
- goto bail;
- }
-
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
- GFP_KERNEL);
- if (!pd->port_rcvhdrtail_kvaddr) {
- ipath_dev_err(dd, "attempt to allocate 1 page "
- "for port %u rcvhdrqtailaddr "
- "failed\n", pd->port_port);
- ret = -ENOMEM;
- dma_free_coherent(&dd->pcidev->dev, amt,
- pd->port_rcvhdrq,
- pd->port_rcvhdrq_phys);
- pd->port_rcvhdrq = NULL;
- goto bail;
- }
- pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
- ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx "
- "physical\n", pd->port_port,
- (unsigned long long) phys_hdrqtail);
- }
-
- pd->port_rcvhdrq_size = amt;
-
- ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu "
- "for port %u rcvhdr Q\n",
- amt >> PAGE_SHIFT, pd->port_rcvhdrq,
- (unsigned long) pd->port_rcvhdrq_phys,
- (unsigned long) pd->port_rcvhdrq_size,
- pd->port_port);
- }
- else
- ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
- "hdrtailaddr@%p %llx physical\n",
- pd->port_port, pd->port_rcvhdrq,
- (unsigned long long) pd->port_rcvhdrq_phys,
- pd->port_rcvhdrtail_kvaddr, (unsigned long long)
- pd->port_rcvhdrqtailaddr_phys);
-
- /* clear for security and sanity on each use */
- memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
- if (pd->port_rcvhdrtail_kvaddr)
- memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
-
- /*
- * tell chip each time we init it, even if we are re-using previous
- * memory (we zero the register at process close)
- */
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
- pd->port_port, pd->port_rcvhdrqtailaddr_phys);
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
- pd->port_port, pd->port_rcvhdrq_phys);
-
-bail:
- return ret;
-}
-
-
-/*
- * Flush all sends that might be in the ready to send state, as well as any
- * that are in the process of being sent. Used whenever we need to be
- * sure the send side is idle. Cleans up all buffer state by canceling
- * all pio buffers, and issuing an abort, which cleans up anything in the
- * launch fifo. The cancel is superfluous on some chip versions, but
- * it's safer to always do it.
- * PIOAvail bits are updated by the chip as if normal send had happened.
- */
-void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
-{
- unsigned long flags;
-
- if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
- ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
- goto bail;
- }
- /*
- * If we have SDMA, and it's not disabled, we have to kick off the
- * abort state machine, provided we aren't already aborting.
- * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
- * we skip the rest of this routine. It is already "in progress"
- */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
- int skip_cancel;
- unsigned long *statp = &dd->ipath_sdma_status;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- skip_cancel =
- test_and_set_bit(IPATH_SDMA_ABORTING, statp)
- && !test_bit(IPATH_SDMA_DISABLED, statp);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (skip_cancel)
- goto bail;
- }
-
- ipath_dbg("Cancelling all in-progress send buffers\n");
-
- /* skip armlaunch errs for a while */
- dd->ipath_lastcancel = jiffies + HZ / 2;
-
- /*
- * The abort bit is auto-clearing. We also don't want pioavail
- * update happening during this, and we don't want any other
- * sends going out, so turn those off for the duration. We read
- * the scratch register to be sure that cancels and the abort
- * have taken effect in the chip. Otherwise two parts are same
- * as ipath_force_pio_avail_update()
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
- | INFINIPATH_S_PIOENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl | INFINIPATH_S_ABORT);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* disarm all send buffers */
- ipath_disarm_piobufs(dd, 0,
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
-
- if (restore_sendctrl) {
- /* else done by caller later if needed */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
- INFINIPATH_S_PIOENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- /* and again, be sure all have hit the chip */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-
- if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
- !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
- test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- /* only wait so long for intr */
- dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
- dd->ipath_sdma_reset_wait = 200;
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- }
-bail:;
-}
-
-/*
- * Force an update of in-memory copy of the pioavail registers, when
- * needed for any of a variety of reasons. We read the scratch register
- * to make it highly likely that the update will have happened by the
- * time we return. If already off (as in cancel_sends above), this
- * routine is a nop, on the assumption that the caller will "do the
- * right thing".
- */
-void ipath_force_pio_avail_update(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- }
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-}
-
-static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd,
- int linitcmd)
-{
- u64 mod_wd;
- static const char *what[4] = {
- [0] = "NOP",
- [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN",
- [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
- [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
- };
-
- if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) {
- /*
- * If we are told to disable, note that so link-recovery
- * code does not attempt to bring us back up.
- */
- preempt_disable();
- dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
- preempt_enable();
- } else if (linitcmd) {
- /*
- * Any other linkinitcmd will lead to LINKDOWN and then
- * to INIT (if all is well), so clear flag to let
- * link-recovery code attempt to bring us back up.
- */
- preempt_disable();
- dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
- preempt_enable();
- }
-
- mod_wd = (linkcmd << dd->ibcc_lc_shift) |
- (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT);
- ipath_cdbg(VERBOSE,
- "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n",
- dd->ipath_unit, what[linkcmd], linitcmd,
- ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl | mod_wd);
- /* read from chip so write is flushed */
- (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-}
-
-int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
-{
- u32 lstate;
- int ret;
-
- switch (newstate) {
- case IPATH_IB_LINKDOWN_ONLY:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_POLL);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN_SLEEP:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_SLEEP);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKDOWN_DISABLE:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
- INFINIPATH_IBCC_LINKINITCMD_DISABLE);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINKARM:
- if (dd->ipath_flags & IPATH_LINKARMED) {
- ret = 0;
- goto bail;
- }
- if (!(dd->ipath_flags &
- (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
- ret = -EINVAL;
- goto bail;
- }
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0);
-
- /*
- * Since the port can transition to ACTIVE by receiving
- * a non VL 15 packet, wait for either state.
- */
- lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
- break;
-
- case IPATH_IB_LINKACTIVE:
- if (dd->ipath_flags & IPATH_LINKACTIVE) {
- ret = 0;
- goto bail;
- }
- if (!(dd->ipath_flags & IPATH_LINKARMED)) {
- ret = -EINVAL;
- goto bail;
- }
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0);
- lstate = IPATH_LINKACTIVE;
- break;
-
- case IPATH_IB_LINK_LOOPBACK:
- dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n");
- dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
-
- /* turn heartbeat off, as it causes loopback to fail */
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_OFF);
- /* don't wait */
- ret = 0;
- goto bail;
-
- case IPATH_IB_LINK_EXTERNAL:
- dev_info(&dd->pcidev->dev,
- "Disabling IB local loopback (normal)\n");
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_ON);
- dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- /* don't wait */
- ret = 0;
- goto bail;
-
- /*
- * Heartbeat can be explicitly enabled by the user via
- * "hrtbt_enable" "file", and if disabled, trying to enable here
- * will have no effect. Implicit changes (heartbeat off when
- * loopback on, and vice versa) are included to ease testing.
- */
- case IPATH_IB_LINK_HRTBT:
- ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_ON);
- goto bail;
-
- case IPATH_IB_LINK_NO_HRTBT:
- ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
- IPATH_IB_HRTBT_OFF);
- goto bail;
-
- default:
- ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
- ret = -EINVAL;
- goto bail;
- }
- ret = ipath_wait_linkstate(dd, lstate, 2000);
-
-bail:
- return ret;
-}
-
-/**
- * ipath_set_mtu - set the MTU
- * @dd: the infinipath device
- * @arg: the new MTU
- *
- * we can handle "any" incoming size, the issue here is whether we
- * need to restrict our outgoing size. For now, we don't do any
- * sanity checking on this, and we don't deal with what happens to
- * programs that are already running when the size changes.
- * NOTE: changing the MTU will usually cause the IBC to go back to
- * link INIT state...
- */
-int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
-{
- u32 piosize;
- int changed = 0;
- int ret;
-
- /*
- * mtu is IB data payload max. It's the largest power of 2 less
- * than piosize (or even larger, since it only really controls the
- * largest we can receive; we can send the max of the mtu and
- * piosize). We check that it's one of the valid IB sizes.
- */
- if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
- (arg != 4096 || !ipath_mtu4096)) {
- ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
- ret = -EINVAL;
- goto bail;
- }
- if (dd->ipath_ibmtu == arg) {
- ret = 0; /* same as current */
- goto bail;
- }
-
- piosize = dd->ipath_ibmaxlen;
- dd->ipath_ibmtu = arg;
-
- if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
- /* Only if it's not the initial value (or reset to it) */
- if (piosize != dd->ipath_init_ibmaxlen) {
- if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
- piosize = dd->ipath_init_ibmaxlen;
- dd->ipath_ibmaxlen = piosize;
- changed = 1;
- }
- } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
- piosize = arg + IPATH_PIO_MAXIBHDR;
- ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
- "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
- arg);
- dd->ipath_ibmaxlen = piosize;
- changed = 1;
- }
-
- if (changed) {
- u64 ibc = dd->ipath_ibcctrl, ibdw;
- /*
- * update our housekeeping variables, and set IBC max
- * size, same as init code; max IBC is max we allow in
- * buffer, less the qword pbc, plus 1 for ICRC, in dwords
- */
- dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
- ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
- ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
- dd->ibcc_mpl_shift);
- ibc |= ibdw << dd->ibcc_mpl_shift;
- dd->ipath_ibcctrl = ibc;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- dd->ipath_f_tidtemplate(dd);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc)
-{
- dd->ipath_lid = lid;
- dd->ipath_lmc = lmc;
-
- dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid |
- (~((1U << lmc) - 1)) << 16);
-
- dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid);
-
- return 0;
-}
-
-
-/**
- * ipath_write_kreg_port - write a device's per-port 64-bit kernel register
- * @dd: the infinipath device
- * @regno: the register number to write
- * @port: the port containing the register
- * @value: the value to write
- *
- * Registers that vary with the chip implementation constants (port)
- * use this routine.
- */
-void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno,
- unsigned port, u64 value)
-{
- u16 where;
-
- if (port < dd->ipath_portcnt &&
- (regno == dd->ipath_kregs->kr_rcvhdraddr ||
- regno == dd->ipath_kregs->kr_rcvhdrtailaddr))
- where = regno + port;
- else
- where = -1;
-
- ipath_write_kreg(dd, where, value);
-}
-
-/*
- * Following deal with the "obviously simple" task of overriding the state
- * of the LEDS, which normally indicate link physical and logical status.
- * The complications arise in dealing with different hardware mappings
- * and the board-dependent routine being called from interrupts.
- * and then there's the requirement to _flash_ them.
- */
-#define LED_OVER_FREQ_SHIFT 8
-#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
-/* Below is "non-zero" to force override, but both actual LEDs are off */
-#define LED_OVER_BOTH_OFF (8)
-
-static void ipath_run_led_override(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
- int timeoff;
- int pidx;
- u64 lstate, ltstate, val;
-
- if (!(dd->ipath_flags & IPATH_INITTED))
- return;
-
- pidx = dd->ipath_led_override_phase++ & 1;
- dd->ipath_led_override = dd->ipath_led_override_vals[pidx];
- timeoff = dd->ipath_led_override_timeoff;
-
- /*
- * below potentially restores the LED values per current status,
- * should also possibly setup the traffic-blink register,
- * but leave that to per-chip functions.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ltstate = ipath_ib_linktrstate(dd, val);
- lstate = ipath_ib_linkstate(dd, val);
-
- dd->ipath_f_setextled(dd, lstate, ltstate);
- mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
-}
-
-void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val)
-{
- int timeoff, freq;
-
- if (!(dd->ipath_flags & IPATH_INITTED))
- return;
-
- /* First check if we are blinking. If not, use 1HZ polling */
- timeoff = HZ;
- freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;
-
- if (freq) {
- /* For blink, set each phase from one nybble of val */
- dd->ipath_led_override_vals[0] = val & 0xF;
- dd->ipath_led_override_vals[1] = (val >> 4) & 0xF;
- timeoff = (HZ << 4)/freq;
- } else {
- /* Non-blink set both phases the same. */
- dd->ipath_led_override_vals[0] = val & 0xF;
- dd->ipath_led_override_vals[1] = val & 0xF;
- }
- dd->ipath_led_override_timeoff = timeoff;
-
- /*
- * If the timer has not already been started, do so. Use a "quick"
- * timeout so the function will be called soon, to look at our request.
- */
- if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) {
- /* Need to start timer */
- init_timer(&dd->ipath_led_override_timer);
- dd->ipath_led_override_timer.function =
- ipath_run_led_override;
- dd->ipath_led_override_timer.data = (unsigned long) dd;
- dd->ipath_led_override_timer.expires = jiffies + 1;
- add_timer(&dd->ipath_led_override_timer);
- } else
- atomic_dec(&dd->ipath_led_override_timer_active);
-}
-
-/**
- * ipath_shutdown_device - shut down a device
- * @dd: the infinipath device
- *
- * This is called to make the device quiet when we are about to
- * unload the driver, and also when the device is administratively
- * disabled. It does not free any data structures.
- * Everything it does has to be setup again by ipath_init_chip(dd,1)
- */
-void ipath_shutdown_device(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- ipath_dbg("Shutting down the device\n");
-
- ipath_hol_up(dd); /* make sure user processes aren't suspended */
-
- dd->ipath_flags |= IPATH_LINKUNK;
- dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
- IPATH_LINKINIT | IPATH_LINKARMED |
- IPATH_LINKACTIVE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF |
- IPATH_STATUS_IB_READY);
-
- /* mask interrupts, but not errors */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
-
- dd->ipath_rcvctrl = 0;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- teardown_sdma(dd);
-
- /*
- * gracefully stop all sends allowing any in progress to trickle out
- * first.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = 0;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- /* flush it */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /*
- * enough for anything that's going to trickle out to have actually
- * done so.
- */
- udelay(5);
-
- dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
-
- ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
- ipath_cancel_sends(dd, 0);
-
- /*
- * we are shutting down, so tell components that care. We don't do
- * this on just a link state change, much like ethernet, a cable
- * unplug, etc. doesn't change driver state
- */
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
-
- /* disable IBC */
- dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control | INFINIPATH_C_FREEZEMODE);
-
- /*
- * clear SerdesEnable and turn the leds off; do this here because
- * we are unloading, so don't count on interrupts to move along
- * Turn the LEDs off explicitly for the same reason.
- */
- dd->ipath_f_quiet_serdes(dd);
-
- /* stop all the timers that might still be running */
- del_timer_sync(&dd->ipath_hol_timer);
- if (dd->ipath_stats_timer_active) {
- del_timer_sync(&dd->ipath_stats_timer);
- dd->ipath_stats_timer_active = 0;
- }
- if (dd->ipath_intrchk_timer.data) {
- del_timer_sync(&dd->ipath_intrchk_timer);
- dd->ipath_intrchk_timer.data = 0;
- }
- if (atomic_read(&dd->ipath_led_override_timer_active)) {
- del_timer_sync(&dd->ipath_led_override_timer);
- atomic_set(&dd->ipath_led_override_timer_active, 0);
- }
-
- /*
- * clear all interrupts and errors, so that the next time the driver
- * is loaded or device is enabled, we know that whatever is set
- * happened while we were unloaded
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
-
- ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n");
- ipath_update_eeprom_log(dd);
-}
-
-/**
- * ipath_free_pddata - free a port's allocated data
- * @dd: the infinipath device
- * @pd: the portdata structure
- *
- * free up any allocated data for a port
- * This should not touch anything that would affect a simultaneous
- * re-allocation of port data, because it is called after ipath_mutex
- * is released (and can be called from reinit as well).
- * It should never change any chip state, or global driver state.
- * (The only exception to global state is freeing the port0 port0_skbs.)
- */
-void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
-{
- if (!pd)
- return;
-
- if (pd->port_rcvhdrq) {
- ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
- "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
- (unsigned long) pd->port_rcvhdrq_size);
- dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
- pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
- pd->port_rcvhdrq = NULL;
- if (pd->port_rcvhdrtail_kvaddr) {
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- pd->port_rcvhdrtail_kvaddr,
- pd->port_rcvhdrqtailaddr_phys);
- pd->port_rcvhdrtail_kvaddr = NULL;
- }
- }
- if (pd->port_port && pd->port_rcvegrbuf) {
- unsigned e;
-
- for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
- void *base = pd->port_rcvegrbuf[e];
- size_t size = pd->port_rcvegrbuf_size;
-
- ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
- "chunk %u/%u\n", base,
- (unsigned long) size,
- e, pd->port_rcvegrbuf_chunks);
- dma_free_coherent(&dd->pcidev->dev, size,
- base, pd->port_rcvegrbuf_phys[e]);
- }
- kfree(pd->port_rcvegrbuf);
- pd->port_rcvegrbuf = NULL;
- kfree(pd->port_rcvegrbuf_phys);
- pd->port_rcvegrbuf_phys = NULL;
- pd->port_rcvegrbuf_chunks = 0;
- } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
- unsigned e;
- struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;
-
- dd->ipath_port0_skbinfo = NULL;
- ipath_cdbg(VERBOSE, "free closed port %d "
- "ipath_port0_skbinfo @ %p\n", pd->port_port,
- skbinfo);
- for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++)
- if (skbinfo[e].skb) {
- pci_unmap_single(dd->pcidev, skbinfo[e].phys,
- dd->ipath_ibmaxlen,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(skbinfo[e].skb);
- }
- vfree(skbinfo);
- }
- kfree(pd->port_tid_pg_list);
- vfree(pd->subport_uregbase);
- vfree(pd->subport_rcvegrbuf);
- vfree(pd->subport_rcvhdr_base);
- kfree(pd);
-}
-
-static int __init infinipath_init(void)
-{
- int ret;
-
- if (ipath_debug & __IPATH_DBG)
- printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);
-
- /*
- * These must be called before the driver is registered with
- * the PCI subsystem.
- */
- idr_init(&unit_table);
-
- ret = pci_register_driver(&ipath_driver);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Unable to register driver: error %d\n", -ret);
- goto bail_unit;
- }
-
- ret = ipath_init_ipathfs();
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
- "ipathfs: error %d\n", -ret);
- goto bail_pci;
- }
-
- goto bail;
-
-bail_pci:
- pci_unregister_driver(&ipath_driver);
-
-bail_unit:
- idr_destroy(&unit_table);
-
-bail:
- return ret;
-}
-
-static void __exit infinipath_cleanup(void)
-{
- ipath_exit_ipathfs();
-
- ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
- pci_unregister_driver(&ipath_driver);
-
- idr_destroy(&unit_table);
-}
-
-/**
- * ipath_reset_device - reset the chip if possible
- * @unit: the device to reset
- *
- * Whether or not reset is successful, we attempt to re-initialize the chip
- * (that is, much like a driver unload/reload). We clear the INITTED flag
- * so that the various entry points will fail until we reinitialize. For
- * now, we only allow this if no user ports are open that use chip resources
- */
-int ipath_reset_device(int unit)
-{
- int ret, i;
- struct ipath_devdata *dd = ipath_lookup(unit);
- unsigned long flags;
-
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
-
- if (atomic_read(&dd->ipath_led_override_timer_active)) {
- /* Need to stop LED timer, _then_ shut off LEDs */
- del_timer_sync(&dd->ipath_led_override_timer);
- atomic_set(&dd->ipath_led_override_timer_active, 0);
- }
-
- /* Shut off LEDs after we are sure timer is not running */
- dd->ipath_led_override = LED_OVER_BOTH_OFF;
- dd->ipath_f_setextled(dd, 0, 0);
-
- dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit);
-
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) {
- dev_info(&dd->pcidev->dev, "Invalid unit number %u or "
- "not initialized or not present\n", unit);
- ret = -ENXIO;
- goto bail;
- }
-
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- if (dd->ipath_pd)
- for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
- continue;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- ipath_dbg("unit %u port %d is in use "
- "(PID %u cmd %s), can't reset\n",
- unit, i,
- pid_nr(dd->ipath_pd[i]->port_pid),
- dd->ipath_pd[i]->port_comm);
- ret = -EBUSY;
- goto bail;
- }
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
-
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- teardown_sdma(dd);
-
- dd->ipath_flags &= ~IPATH_INITTED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- ret = dd->ipath_f_reset(dd);
- if (ret == 1) {
- ipath_dbg("Reinitializing unit %u after reset attempt\n",
- unit);
- ret = ipath_init_chip(dd, 1);
- } else
- ret = -EAGAIN;
- if (ret)
- ipath_dev_err(dd, "Reinitialize unit %u after "
- "reset failed with %d\n", unit, ret);
- else
- dev_info(&dd->pcidev->dev, "Reinitialized unit %u after "
- "resetting\n", unit);
-
-bail:
- return ret;
-}
-
-/*
- * send a signal to all the processes that have the driver open
- * through the normal interfaces (i.e., everything other than diags
- * interface). Returns number of signalled processes.
- */
-static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
-{
- int i, sub, any = 0;
- struct pid *pid;
- unsigned long flags;
-
- if (!dd->ipath_pd)
- return 0;
-
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
- continue;
- pid = dd->ipath_pd[i]->port_pid;
- if (!pid)
- continue;
-
- dev_info(&dd->pcidev->dev, "context %d in use "
- "(PID %u), sending signal %d\n",
- i, pid_nr(pid), sig);
- kill_pid(pid, sig, 1);
- any++;
- for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
- pid = dd->ipath_pd[i]->port_subpid[sub];
- if (!pid)
- continue;
- dev_info(&dd->pcidev->dev, "sub-context "
- "%d:%d in use (PID %u), sending "
- "signal %d\n", i, sub, pid_nr(pid), sig);
- kill_pid(pid, sig, 1);
- any++;
- }
- }
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
- return any;
-}
-
-static void ipath_hol_signal_down(struct ipath_devdata *dd)
-{
- if (ipath_signal_procs(dd, SIGSTOP))
- ipath_dbg("Stopped some processes\n");
- ipath_cancel_sends(dd, 1);
-}
-
-
-static void ipath_hol_signal_up(struct ipath_devdata *dd)
-{
- if (ipath_signal_procs(dd, SIGCONT))
- ipath_dbg("Continued some processes\n");
-}
-
-/*
- * link is down, stop any users processes, and flush pending sends
- * to prevent HoL blocking, then start the HoL timer that
- * periodically continues, then stop procs, so they can detect
- * link down if they want, and do something about it.
- * Timer may already be running, so use mod_timer, not add_timer.
- */
-void ipath_hol_down(struct ipath_devdata *dd)
-{
- dd->ipath_hol_state = IPATH_HOL_DOWN;
- ipath_hol_signal_down(dd);
- dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
- dd->ipath_hol_timer.expires = jiffies +
- msecs_to_jiffies(ipath_hol_timeout_ms);
- mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
-}
-
-/*
- * link is up, continue any user processes, and ensure timer
- * is a nop, if running. Let timer keep running, if set; it
- * will nop when it sees the link is up
- */
-void ipath_hol_up(struct ipath_devdata *dd)
-{
- ipath_hol_signal_up(dd);
- dd->ipath_hol_state = IPATH_HOL_UP;
-}
-
-/*
- * toggle the running/not running state of user proceses
- * to prevent HoL blocking on chip resources, but still allow
- * user processes to do link down special case handling.
- * Should only be called via the timer
- */
-void ipath_hol_event(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
- && dd->ipath_hol_state != IPATH_HOL_UP) {
- dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
- ipath_dbg("Stopping processes\n");
- ipath_hol_signal_down(dd);
- } else { /* may do "extra" if also in ipath_hol_up() */
- dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
- ipath_dbg("Continuing processes\n");
- ipath_hol_signal_up(dd);
- }
- if (dd->ipath_hol_state == IPATH_HOL_UP)
- ipath_dbg("link's up, don't resched timer\n");
- else {
- dd->ipath_hol_timer.expires = jiffies +
- msecs_to_jiffies(ipath_hol_timeout_ms);
- mod_timer(&dd->ipath_hol_timer,
- dd->ipath_hol_timer.expires);
- }
-}
-
-int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
-{
- u64 val;
-
- if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK)
- return -1;
- if (dd->ipath_rx_pol_inv != new_pol_inv) {
- dd->ipath_rx_pol_inv = new_pol_inv;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
- INFINIPATH_XGXS_RX_POL_SHIFT);
- val |= ((u64)dd->ipath_rx_pol_inv) <<
- INFINIPATH_XGXS_RX_POL_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- }
- return 0;
-}
-
-/*
- * Disable and enable the armlaunch error. Used for PIO bandwidth testing on
- * the 7220, which is count-based, rather than trigger-based. Safe for the
- * driver check, since it's at init. Not completely safe when used for
- * user-mode checking, since some error checking can be lost, but not
- * particularly risky, and only has problematic side-effects in the face of
- * very buggy user code. There is no reference counting, but that's also
- * fine, given the intended use.
- */
-void ipath_enable_armlaunch(struct ipath_devdata *dd)
-{
- dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- INFINIPATH_E_SPIOARMLAUNCH);
- dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-}
-
-void ipath_disable_armlaunch(struct ipath_devdata *dd)
-{
- /* so don't re-enable if already set */
- dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH;
- dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-}
-
-module_init(infinipath_init);
-module_exit(infinipath_cleanup);
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-
-/*
- * InfiniPath I2C driver for a serial eeprom. This is not a generic
- * I2C interface. For a start, the device we're using (Atmel AT24C11)
- * doesn't work like a regular I2C device. It looks like one
- * electrically, but not logically. Normal I2C devices have a single
- * 7-bit or 10-bit I2C address that they respond to. Valid 7-bit
- * addresses range from 0x03 to 0x77. Addresses 0x00 to 0x02 and 0x78
- * to 0x7F are special reserved addresses (e.g. 0x00 is the "general
- * call" address.) The Atmel device, on the other hand, responds to ALL
- * 7-bit addresses. It's designed to be the only device on a given I2C
- * bus. A 7-bit address corresponds to the memory address within the
- * Atmel device itself.
- *
- * Also, the timing requirements mean more than simple software
- * bitbanging, with readbacks from chip to ensure timing (simple udelay
- * is not enough).
- *
- * This all means that accessing the device is specialized enough
- * that using the standard kernel I2C bitbanging interface would be
- * impossible. For example, the core I2C eeprom driver expects to find
- * a device at one or more of a limited set of addresses only. It doesn't
- * allow writing to an eeprom. It also doesn't provide any means of
- * accessing eeprom contents from within the kernel, only via sysfs.
- */
-
-/* Added functionality for IBA7220-based cards */
-#define IPATH_EEPROM_DEV_V1 0xA0
-#define IPATH_EEPROM_DEV_V2 0xA2
-#define IPATH_TEMP_DEV 0x98
-#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
-#define IPATH_NO_DEV (0xFF)
-
-/*
- * The number of I2C chains is proliferating. Table below brings
- * some order to the madness. The basic principle is that the
- * table is scanned from the top, and a "probe" is made to the
- * device probe_dev. If that succeeds, the chain is considered
- * to be of that type, and dd->i2c_chain_type is set to the index+1
- * of the entry.
- * The +1 is so static initialization can mean "unknown, do probe."
- */
-static struct i2c_chain_desc {
- u8 probe_dev; /* If seen at probe, chain is this type */
- u8 eeprom_dev; /* Dev addr (if any) for EEPROM */
- u8 temp_dev; /* Dev Addr (if any) for Temp-sense */
-} i2c_chains[] = {
- { IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
- { IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
- { IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
- { IPATH_NO_DEV }
-};
-
-enum i2c_type {
- i2c_line_scl = 0,
- i2c_line_sda
-};
-
-enum i2c_state {
- i2c_line_low = 0,
- i2c_line_high
-};
-
-#define READ_CMD 1
-#define WRITE_CMD 0
-
-/**
- * i2c_gpio_set - set a GPIO line
- * @dd: the infinipath device
- * @line: the line to set
- * @new_line_state: the state to set
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error.
- */
-static int i2c_gpio_set(struct ipath_devdata *dd,
- enum i2c_type line,
- enum i2c_state new_line_state)
-{
- u64 out_mask, dir_mask, *gpioval;
- unsigned long flags = 0;
-
- gpioval = &dd->ipath_gpio_out;
-
- if (line == i2c_line_scl) {
- dir_mask = dd->ipath_gpio_scl;
- out_mask = (1UL << dd->ipath_gpio_scl_num);
- } else {
- dir_mask = dd->ipath_gpio_sda;
- out_mask = (1UL << dd->ipath_gpio_sda_num);
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- if (new_line_state == i2c_line_high) {
- /* tri-state the output rather than force high */
- dd->ipath_extctrl &= ~dir_mask;
- } else {
- /* config line to be an output */
- dd->ipath_extctrl |= dir_mask;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
-
- /* set output as well (no real verify) */
- if (new_line_state == i2c_line_high)
- *gpioval |= out_mask;
- else
- *gpioval &= ~out_mask;
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- return 0;
-}
-
-/**
- * i2c_gpio_get - get a GPIO line state
- * @dd: the infinipath device
- * @line: the line to get
- * @curr_statep: where to put the line state
- *
- * Returns 0 if the line was set to the new state successfully, non-zero
- * on error. curr_state is not set on error.
- */
-static int i2c_gpio_get(struct ipath_devdata *dd,
- enum i2c_type line,
- enum i2c_state *curr_statep)
-{
- u64 read_val, mask;
- int ret;
- unsigned long flags = 0;
-
- /* check args */
- if (curr_statep == NULL) {
- ret = 1;
- goto bail;
- }
-
- /* config line to be an input */
- if (line == i2c_line_scl)
- mask = dd->ipath_gpio_scl;
- else
- mask = dd->ipath_gpio_sda;
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- dd->ipath_extctrl &= ~mask;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
- /*
- * Below is very unlikely to reflect true input state if Output
- * Enable actually changed.
- */
- read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- if (read_val & mask)
- *curr_statep = i2c_line_high;
- else
- *curr_statep = i2c_line_low;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * i2c_wait_for_writes - wait for a write
- * @dd: the infinipath device
- *
- * We use this instead of udelay directly, so we can make sure
- * that previous register writes have been flushed all the way
- * to the chip. Since we are delaying anyway, the cost doesn't
- * hurt, and makes the bit twiddling more regular
- */
-static void i2c_wait_for_writes(struct ipath_devdata *dd)
-{
- (void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- rmb();
-}
-
-static void scl_out(struct ipath_devdata *dd, u8 bit)
-{
- udelay(1);
- i2c_gpio_set(dd, i2c_line_scl, bit ? i2c_line_high : i2c_line_low);
-
- i2c_wait_for_writes(dd);
-}
-
-static void sda_out(struct ipath_devdata *dd, u8 bit)
-{
- i2c_gpio_set(dd, i2c_line_sda, bit ? i2c_line_high : i2c_line_low);
-
- i2c_wait_for_writes(dd);
-}
-
-static u8 sda_in(struct ipath_devdata *dd, int wait)
-{
- enum i2c_state bit;
-
- if (i2c_gpio_get(dd, i2c_line_sda, &bit))
- ipath_dbg("get bit failed!\n");
-
- if (wait)
- i2c_wait_for_writes(dd);
-
- return bit == i2c_line_high ? 1U : 0;
-}
-
-/**
- * i2c_ackrcv - see if ack following write is true
- * @dd: the infinipath device
- */
-static int i2c_ackrcv(struct ipath_devdata *dd)
-{
- u8 ack_received;
-
- /* AT ENTRY SCL = LOW */
- /* change direction, ignore data */
- ack_received = sda_in(dd, 1);
- scl_out(dd, i2c_line_high);
- ack_received = sda_in(dd, 1) == 0;
- scl_out(dd, i2c_line_low);
- return ack_received;
-}
-
-/**
- * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
- * @dd: the infinipath device
- *
- * Returns byte shifted out of device
- */
-static int rd_byte(struct ipath_devdata *dd)
-{
- int bit_cntr, data;
-
- data = 0;
-
- for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
- data <<= 1;
- scl_out(dd, i2c_line_high);
- data |= sda_in(dd, 0);
- scl_out(dd, i2c_line_low);
- }
- return data;
-}
-
-/**
- * wr_byte - write a byte, one bit at a time
- * @dd: the infinipath device
- * @data: the byte to write
- *
- * Returns 0 if we got the following ack, otherwise 1
- */
-static int wr_byte(struct ipath_devdata *dd, u8 data)
-{
- int bit_cntr;
- u8 bit;
-
- for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
- bit = (data >> bit_cntr) & 1;
- sda_out(dd, bit);
- scl_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_low);
- }
- return (!i2c_ackrcv(dd)) ? 1 : 0;
-}
-
-static void send_ack(struct ipath_devdata *dd)
-{
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_high);
-}
-
-/**
- * i2c_startcmd - transmit the start condition, followed by address/cmd
- * @dd: the infinipath device
- * @offset_dir: direction byte
- *
- * (both clock/data high, clock high, data low while clock is high)
- */
-static int i2c_startcmd(struct ipath_devdata *dd, u8 offset_dir)
-{
- int res;
-
- /* issue start sequence */
- sda_out(dd, i2c_line_high);
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_low);
-
- /* issue length and direction byte */
- res = wr_byte(dd, offset_dir);
-
- if (res)
- ipath_cdbg(VERBOSE, "No ack to complete start\n");
-
- return res;
-}
-
-/**
- * stop_cmd - transmit the stop condition
- * @dd: the infinipath device
- *
- * (both clock/data low, clock high, data high while clock is high)
- */
-static void stop_cmd(struct ipath_devdata *dd)
-{
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_high);
- udelay(2);
-}
-
-/**
- * eeprom_reset - reset I2C communication
- * @dd: the infinipath device
- */
-
-static int eeprom_reset(struct ipath_devdata *dd)
-{
- int clock_cycles_left = 9;
- u64 *gpioval = &dd->ipath_gpio_out;
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- /* Make sure shadows are consistent */
- dd->ipath_extctrl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
- *gpioval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_out);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
- "is %llx\n", (unsigned long long) *gpioval);
-
- /*
- * This is to get the i2c into a known state, by first going low,
- * then tristate sda (and then tristate scl as first thing
- * in loop)
- */
- scl_out(dd, i2c_line_low);
- sda_out(dd, i2c_line_high);
-
- /* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
- while (clock_cycles_left--) {
- scl_out(dd, i2c_line_high);
-
- /* SDA seen high, issue START by dropping it while SCL high */
- if (sda_in(dd, 0)) {
- sda_out(dd, i2c_line_low);
- scl_out(dd, i2c_line_low);
- /* ATMEL spec says must be followed by STOP. */
- scl_out(dd, i2c_line_high);
- sda_out(dd, i2c_line_high);
- ret = 0;
- goto bail;
- }
-
- scl_out(dd, i2c_line_low);
- }
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/*
- * Probe for I2C device at specified address. Returns 0 for "success"
- * to match rest of this file.
- * Leave bus in "reasonable" state for further commands.
- */
-static int i2c_probe(struct ipath_devdata *dd, int devaddr)
-{
- int ret = 0;
-
- ret = eeprom_reset(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
- devaddr);
- return ret;
- }
- /*
- * Reset no longer leaves bus in start condition, so normal
- * i2c_startcmd() will do.
- */
- ret = i2c_startcmd(dd, devaddr | READ_CMD);
- if (ret)
- ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
- devaddr);
- else {
- /*
- * Device did respond. Complete a single-byte read, because some
- * devices apparently cannot handle STOP immediately after they
- * ACK the start-cmd.
- */
- int data;
- data = rd_byte(dd);
- stop_cmd(dd);
- ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
- }
- return ret;
-}
-
-/*
- * Returns the "i2c type". This is a pointer to a struct that describes
- * the I2C chain on this board. To minimize impact on struct ipath_devdata,
- * the (small integer) index into the table is actually memoized, rather
- * then the pointer.
- * Memoization is because the type is determined on the first call per chip.
- * An alternative would be to move type determination to early
- * init code.
- */
-static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
-{
- int idx;
-
- /* Get memoized index, from previous successful probes */
- idx = dd->ipath_i2c_chain_type - 1;
- if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
- goto done;
-
- idx = 0;
- while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
- /* if probe succeeds, this is type */
- if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
- break;
- ++idx;
- }
-
- /*
- * Old EEPROM (first entry) may require a reset after probe,
- * rather than being able to "start" after "stop"
- */
- if (idx == 0)
- eeprom_reset(dd);
-
- if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
- idx = -1;
- else
- dd->ipath_i2c_chain_type = idx + 1;
-done:
- return (idx >= 0) ? i2c_chains + idx : NULL;
-}
-
-static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
- u8 eeprom_offset, void *buffer, int len)
-{
- int ret;
- struct i2c_chain_desc *icd;
- u8 *bp = buffer;
-
- ret = 1;
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->eeprom_dev == IPATH_NO_DEV) {
- /* legacy not-really-I2C */
- ipath_cdbg(VERBOSE, "Start command only address\n");
- eeprom_offset = (eeprom_offset << 1) | READ_CMD;
- ret = i2c_startcmd(dd, eeprom_offset);
- } else {
- /* Actual I2C */
- ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
- if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
- ipath_dbg("Failed EEPROM startcmd\n");
- stop_cmd(dd);
- ret = 1;
- goto bail;
- }
- ret = wr_byte(dd, eeprom_offset);
- stop_cmd(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed to write EEPROM address\n");
- ret = 1;
- goto bail;
- }
- ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
- }
- if (ret) {
- ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
- stop_cmd(dd);
- ret = 1;
- goto bail;
- }
-
- /*
- * eeprom keeps clocking data out as long as we ack, automatically
- * incrementing the address.
- */
- while (len-- > 0) {
- /* get and store data */
- *bp++ = rd_byte(dd);
- /* send ack if not the last byte */
- if (len)
- send_ack(dd);
- }
-
- stop_cmd(dd);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
- const void *buffer, int len)
-{
- int sub_len;
- const u8 *bp = buffer;
- int max_wait_time, i;
- int ret;
- struct i2c_chain_desc *icd;
-
- ret = 1;
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- while (len > 0) {
- if (icd->eeprom_dev == IPATH_NO_DEV) {
- if (i2c_startcmd(dd,
- (eeprom_offset << 1) | WRITE_CMD)) {
- ipath_dbg("Failed to start cmd offset %u\n",
- eeprom_offset);
- goto failed_write;
- }
- } else {
- /* Real I2C */
- if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
- ipath_dbg("Failed EEPROM startcmd\n");
- goto failed_write;
- }
- ret = wr_byte(dd, eeprom_offset);
- if (ret) {
- ipath_dev_err(dd, "Failed to write EEPROM "
- "address\n");
- goto failed_write;
- }
- }
-
- sub_len = min(len, 4);
- eeprom_offset += sub_len;
- len -= sub_len;
-
- for (i = 0; i < sub_len; i++) {
- if (wr_byte(dd, *bp++)) {
- ipath_dbg("no ack after byte %u/%u (%u "
- "total remain)\n", i, sub_len,
- len + sub_len - i);
- goto failed_write;
- }
- }
-
- stop_cmd(dd);
-
- /*
- * wait for write complete by waiting for a successful
- * read (the chip replies with a zero after the write
- * cmd completes, and before it writes to the eeprom.
- * The startcmd for the read will fail the ack until
- * the writes have completed. We do this inline to avoid
- * the debug prints that are in the real read routine
- * if the startcmd fails.
- * We also use the proper device address, so it doesn't matter
- * whether we have real eeprom_dev. legacy likes any address.
- */
- max_wait_time = 100;
- while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
- stop_cmd(dd);
- if (!--max_wait_time) {
- ipath_dbg("Did not get successful read to "
- "complete write\n");
- goto failed_write;
- }
- }
- /* now read (and ignore) the resulting byte */
- rd_byte(dd);
- stop_cmd(dd);
- }
-
- ret = 0;
- goto bail;
-
-failed_write:
- stop_cmd(dd);
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_eeprom_read - receives bytes from the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: address to read from
- * @buffer: where to store result
- * @len: number of bytes to receive
- */
-int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
- void *buff, int len)
-{
- int ret;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_eeprom_internal_read(dd, eeprom_offset, buff, len);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- return ret;
-}
-
-/**
- * ipath_eeprom_write - writes data to the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: where to place data
- * @buffer: data to write
- * @len: number of bytes to write
- */
-int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
- const void *buff, int len)
-{
- int ret;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_eeprom_internal_write(dd, eeprom_offset, buff, len);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- return ret;
-}
-
-static u8 flash_csum(struct ipath_flash *ifp, int adjust)
-{
- u8 *ip = (u8 *) ifp;
- u8 csum = 0, len;
-
- /*
- * Limit length checksummed to max length of actual data.
- * Checksum of erased eeprom will still be bad, but we avoid
- * reading past the end of the buffer we were passed.
- */
- len = ifp->if_length;
- if (len > sizeof(struct ipath_flash))
- len = sizeof(struct ipath_flash);
- while (len--)
- csum += *ip++;
- csum -= ifp->if_csum;
- csum = ~csum;
- if (adjust)
- ifp->if_csum = csum;
-
- return csum;
-}
-
-/**
- * ipath_get_guid - get the GUID from the i2c device
- * @dd: the infinipath device
- *
- * We have the capability to use the ipath_nguid field, and get
- * the guid from the first chip's flash, to use for all of them.
- */
-void ipath_get_eeprom_info(struct ipath_devdata *dd)
-{
- void *buf;
- struct ipath_flash *ifp;
- __be64 guid;
- int len, eep_stat;
- u8 csum, *bguid;
- int t = dd->ipath_unit;
- struct ipath_devdata *dd0 = ipath_lookup(0);
-
- if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) {
- u8 oguid;
- dd->ipath_guid = dd0->ipath_guid;
- bguid = (u8 *) & dd->ipath_guid;
-
- oguid = bguid[7];
- bguid[7] += t;
- if (oguid > bguid[7]) {
- if (bguid[6] == 0xff) {
- if (bguid[5] == 0xff) {
- ipath_dev_err(
- dd,
- "Can't set %s GUID from "
- "base, wraps to OUI!\n",
- ipath_get_unit_name(t));
- dd->ipath_guid = 0;
- goto bail;
- }
- bguid[5]++;
- }
- bguid[6]++;
- }
- dd->ipath_nguid = 1;
-
- ipath_dbg("nguid %u, so adding %u to device 0 guid, "
- "for %llx\n",
- dd0->ipath_nguid, t,
- (unsigned long long) be64_to_cpu(dd->ipath_guid));
- goto bail;
- }
-
- /*
- * read full flash, not just currently used part, since it may have
- * been written with a newer definition
- * */
- len = sizeof(struct ipath_flash);
- buf = vmalloc(len);
- if (!buf) {
- ipath_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for GUID\n", len);
- goto bail;
- }
-
- mutex_lock(&dd->ipath_eep_lock);
- eep_stat = ipath_eeprom_internal_read(dd, 0, buf, len);
- mutex_unlock(&dd->ipath_eep_lock);
-
- if (eep_stat) {
- ipath_dev_err(dd, "Failed reading GUID from eeprom\n");
- goto done;
- }
- ifp = (struct ipath_flash *)buf;
-
- csum = flash_csum(ifp, 0);
- if (csum != ifp->if_csum) {
- dev_info(&dd->pcidev->dev, "Bad I2C flash checksum: "
- "0x%x, not 0x%x\n", csum, ifp->if_csum);
- goto done;
- }
- if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
- *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
- ipath_dev_err(dd, "Invalid GUID %llx from flash; "
- "ignoring\n",
- *(unsigned long long *) ifp->if_guid);
- /* don't allow GUID if all 0 or all 1's */
- goto done;
- }
-
- /* complain, but allow it */
- if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
- dev_info(&dd->pcidev->dev, "Warning, GUID %llx is "
- "default, probably not correct!\n",
- *(unsigned long long *) ifp->if_guid);
-
- bguid = ifp->if_guid;
- if (!bguid[0] && !bguid[1] && !bguid[2]) {
- /* original incorrect GUID format in flash; fix in
- * core copy, by shifting up 2 octets; don't need to
- * change top octet, since both it and shifted are
- * 0.. */
- bguid[1] = bguid[3];
- bguid[2] = bguid[4];
- bguid[3] = bguid[4] = 0;
- guid = *(__be64 *) ifp->if_guid;
- ipath_cdbg(VERBOSE, "Old GUID format in flash, top 3 zero, "
- "shifting 2 octets\n");
- } else
- guid = *(__be64 *) ifp->if_guid;
- dd->ipath_guid = guid;
- dd->ipath_nguid = ifp->if_numguid;
- /*
- * Things are slightly complicated by the desire to transparently
- * support both the Pathscale 10-digit serial number and the QLogic
- * 13-character version.
- */
- if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
- && ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
- /* This board has a Serial-prefix, which is stored
- * elsewhere for backward-compatibility.
- */
- char *snp = dd->ipath_serial;
- memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
- snp[sizeof ifp->if_sprefix] = '\0';
- len = strlen(snp);
- snp += len;
- len = (sizeof dd->ipath_serial) - len;
- if (len > sizeof ifp->if_serial) {
- len = sizeof ifp->if_serial;
- }
- memcpy(snp, ifp->if_serial, len);
- } else
- memcpy(dd->ipath_serial, ifp->if_serial,
- sizeof ifp->if_serial);
- if (!strstr(ifp->if_comment, "Tested successfully"))
- ipath_dev_err(dd, "Board SN %s did not pass functional "
- "test: %s\n", dd->ipath_serial,
- ifp->if_comment);
-
- ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
- (unsigned long long) be64_to_cpu(dd->ipath_guid));
-
- memcpy(&dd->ipath_eep_st_errs, &ifp->if_errcntp, IPATH_EEP_LOG_CNT);
- /*
- * Power-on (actually "active") hours are kept as little-endian value
- * in EEPROM, but as seconds in a (possibly as small as 24-bit)
- * atomic_t while running.
- */
- atomic_set(&dd->ipath_active_time, 0);
- dd->ipath_eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
-
-done:
- vfree(buf);
-
-bail:;
-}
-
-/**
- * ipath_update_eeprom_log - copy active-time and error counters to eeprom
- * @dd: the infinipath device
- *
- * Although the time is kept as seconds in the ipath_devdata struct, it is
- * rounded to hours for re-write, as we have only 16 bits in EEPROM.
- * First-cut code reads whole (expected) struct ipath_flash, modifies,
- * re-writes. Future direction: read/write only what we need, assuming
- * that the EEPROM had to have been "good enough" for driver init, and
- * if not, we aren't making it worse.
- *
- */
-
-int ipath_update_eeprom_log(struct ipath_devdata *dd)
-{
- void *buf;
- struct ipath_flash *ifp;
- int len, hi_water;
- uint32_t new_time, new_hrs;
- u8 csum;
- int ret, idx;
- unsigned long flags;
-
- /* first, check if we actually need to do anything. */
- ret = 0;
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- if (dd->ipath_eep_st_new_errs[idx]) {
- ret = 1;
- break;
- }
- }
- new_time = atomic_read(&dd->ipath_active_time);
-
- if (ret == 0 && new_time < 3600)
- return 0;
-
- /*
- * The quick-check above determined that there is something worthy
- * of logging, so get current contents and do a more detailed idea.
- * read full flash, not just currently used part, since it may have
- * been written with a newer definition
- */
- len = sizeof(struct ipath_flash);
- buf = vmalloc(len);
- ret = 1;
- if (!buf) {
- ipath_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for logging\n", len);
- goto bail;
- }
-
- /* Grab semaphore and read current EEPROM. If we get an
- * error, let go, but if not, keep it until we finish write.
- */
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (ret) {
- ipath_dev_err(dd, "Unable to acquire EEPROM for logging\n");
- goto free_bail;
- }
- ret = ipath_eeprom_internal_read(dd, 0, buf, len);
- if (ret) {
- mutex_unlock(&dd->ipath_eep_lock);
- ipath_dev_err(dd, "Unable read EEPROM for logging\n");
- goto free_bail;
- }
- ifp = (struct ipath_flash *)buf;
-
- csum = flash_csum(ifp, 0);
- if (csum != ifp->if_csum) {
- mutex_unlock(&dd->ipath_eep_lock);
- ipath_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
- csum, ifp->if_csum);
- ret = 1;
- goto free_bail;
- }
- hi_water = 0;
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- int new_val = dd->ipath_eep_st_new_errs[idx];
- if (new_val) {
- /*
- * If we have seen any errors, add to EEPROM values
- * We need to saturate at 0xFF (255) and we also
- * would need to adjust the checksum if we were
- * trying to minimize EEPROM traffic
- * Note that we add to actual current count in EEPROM,
- * in case it was altered while we were running.
- */
- new_val += ifp->if_errcntp[idx];
- if (new_val > 0xFF)
- new_val = 0xFF;
- if (ifp->if_errcntp[idx] != new_val) {
- ifp->if_errcntp[idx] = new_val;
- hi_water = offsetof(struct ipath_flash,
- if_errcntp) + idx;
- }
- /*
- * update our shadow (used to minimize EEPROM
- * traffic), to match what we are about to write.
- */
- dd->ipath_eep_st_errs[idx] = new_val;
- dd->ipath_eep_st_new_errs[idx] = 0;
- }
- }
- /*
- * now update active-time. We would like to round to the nearest hour
- * but unless atomic_t are sure to be proper signed ints we cannot,
- * because we need to account for what we "transfer" to EEPROM and
- * if we log an hour at 31 minutes, then we would need to set
- * active_time to -29 to accurately count the _next_ hour.
- */
- if (new_time >= 3600) {
- new_hrs = new_time / 3600;
- atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
- new_hrs += dd->ipath_eep_hrs;
- if (new_hrs > 0xFFFF)
- new_hrs = 0xFFFF;
- dd->ipath_eep_hrs = new_hrs;
- if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
- ifp->if_powerhour[0] = new_hrs & 0xFF;
- hi_water = offsetof(struct ipath_flash, if_powerhour);
- }
- if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
- ifp->if_powerhour[1] = new_hrs >> 8;
- hi_water = offsetof(struct ipath_flash, if_powerhour)
- + 1;
- }
- }
- /*
- * There is a tiny possibility that we could somehow fail to write
- * the EEPROM after updating our shadows, but problems from holding
- * the spinlock too long are a much bigger issue.
- */
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
- if (hi_water) {
- /* we made some change to the data, uopdate cksum and write */
- csum = flash_csum(ifp, 1);
- ret = ipath_eeprom_internal_write(dd, 0, buf, hi_water + 1);
- }
- mutex_unlock(&dd->ipath_eep_lock);
- if (ret)
- ipath_dev_err(dd, "Failed updating EEPROM\n");
-
-free_bail:
- vfree(buf);
-bail:
- return ret;
-
-}
-
-/**
- * ipath_inc_eeprom_err - increment one of the four error counters
- * that are logged to EEPROM.
- * @dd: the infinipath device
- * @eidx: 0..3, the counter to increment
- * @incr: how much to add
- *
- * Each counter is 8-bits, and saturates at 255 (0xFF). They
- * are copied to the EEPROM (aka flash) whenever ipath_update_eeprom_log()
- * is called, but it can only be called in a context that allows sleep.
- * This function can be called even at interrupt level.
- */
-
-void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr)
-{
- uint new_val;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- new_val = dd->ipath_eep_st_new_errs[eidx] + incr;
- if (new_val > 255)
- new_val = 255;
- dd->ipath_eep_st_new_errs[eidx] = new_val;
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
- return;
-}
-
-static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
-{
- int ret;
- struct i2c_chain_desc *icd;
-
- ret = -ENOENT;
-
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->temp_dev == IPATH_NO_DEV) {
- /* tempsense only exists on new, real-I2C boards */
- ret = -ENXIO;
- goto bail;
- }
-
- if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
- ipath_dbg("Failed tempsense startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, regnum);
- stop_cmd(dd);
- if (ret) {
- ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
- regnum);
- ret = -ENXIO;
- goto bail;
- }
- if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
- ipath_dbg("Failed tempsense RD startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- /*
- * We can only clock out one byte per command, sensibly
- */
- ret = rd_byte(dd);
- stop_cmd(dd);
-
-bail:
- return ret;
-}
-
-#define VALID_TS_RD_REG_MASK 0xBF
-
-/**
- * ipath_tempsense_read - read register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to read from
- *
- * returns reg contents (0..255) or < 0 for error
- */
-int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
-{
- int ret;
-
- if (regnum > 7)
- return -EINVAL;
-
- /* return a bogus value for (the one) register we do not have */
- if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
- return 0;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_tempsense_internal_read(dd, regnum);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- /*
- * There are three possibilities here:
- * ret is actual value (0..255)
- * ret is -ENXIO or -EINVAL from code in this file
- * ret is -EINTR from mutex_lock_interruptible.
- */
- return ret;
-}
-
-static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
- u8 regnum, u8 data)
-{
- int ret = -ENOENT;
- struct i2c_chain_desc *icd;
-
- icd = ipath_i2c_type(dd);
- if (!icd)
- goto bail;
-
- if (icd->temp_dev == IPATH_NO_DEV) {
- /* tempsense only exists on new, real-I2C boards */
- ret = -ENXIO;
- goto bail;
- }
- if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
- ipath_dbg("Failed tempsense startcmd\n");
- stop_cmd(dd);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, regnum);
- if (ret) {
- stop_cmd(dd);
- ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
- regnum);
- ret = -ENXIO;
- goto bail;
- }
- ret = wr_byte(dd, data);
- stop_cmd(dd);
- ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
- if (ret) {
- ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
- regnum);
- ret = -ENXIO;
- }
-
-bail:
- return ret;
-}
-
-#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
-
-/**
- * ipath_tempsense_write - write register of temp sensor via I2C
- * @dd: the infinipath device
- * @regnum: register to write
- * @data: data to write
- *
- * returns 0 for success or < 0 for error
- */
-int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
-{
- int ret;
-
- if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
- return -EINVAL;
-
- ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
- if (!ret) {
- ret = ipath_tempsense_internal_write(dd, regnum, data);
- mutex_unlock(&dd->ipath_eep_lock);
- }
-
- /*
- * There are three possibilities here:
- * ret is 0 for success
- * ret is -ENXIO or -EINVAL from code in this file
- * ret is -EINTR from mutex_lock_interruptible.
- */
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/poll.h>
-#include <linux/cdev.h>
-#include <linux/swap.h>
-#include <linux/export.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/highmem.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/cpu.h>
-#include <linux/uio.h>
-#include <asm/pgtable.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-#include "ipath_user_sdma.h"
-
-static int ipath_open(struct inode *, struct file *);
-static int ipath_close(struct inode *, struct file *);
-static ssize_t ipath_write(struct file *, const char __user *, size_t,
- loff_t *);
-static ssize_t ipath_write_iter(struct kiocb *, struct iov_iter *from);
-static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
-static int ipath_mmap(struct file *, struct vm_area_struct *);
-
-/*
- * This is really, really weird shit - write() and writev() here
- * have completely unrelated semantics. Sucky userland ABI,
- * film at 11.
- */
-static const struct file_operations ipath_file_ops = {
- .owner = THIS_MODULE,
- .write = ipath_write,
- .write_iter = ipath_write_iter,
- .open = ipath_open,
- .release = ipath_close,
- .poll = ipath_poll,
- .mmap = ipath_mmap,
- .llseek = noop_llseek,
-};
-
-/*
- * Convert kernel virtual addresses to physical addresses so they don't
- * potentially conflict with the chip addresses used as mmap offsets.
- * It doesn't really matter what mmap offset we use as long as we can
- * interpret it correctly.
- */
-static u64 cvt_kvaddr(void *p)
-{
- struct page *page;
- u64 paddr = 0;
-
- page = vmalloc_to_page(p);
- if (page)
- paddr = page_to_pfn(page) << PAGE_SHIFT;
-
- return paddr;
-}
-
-static int ipath_get_base_info(struct file *fp,
- void __user *ubase, size_t ubase_size)
-{
- struct ipath_portdata *pd = port_fp(fp);
- int ret = 0;
- struct ipath_base_info *kinfo = NULL;
- struct ipath_devdata *dd = pd->port_dd;
- unsigned subport_cnt;
- int shared, master;
- size_t sz;
-
- subport_cnt = pd->port_subport_cnt;
- if (!subport_cnt) {
- shared = 0;
- master = 0;
- subport_cnt = 1;
- } else {
- shared = 1;
- master = !subport_fp(fp);
- }
-
- sz = sizeof(*kinfo);
- /* If port sharing is not requested, allow the old size structure */
- if (!shared)
- sz -= 7 * sizeof(u64);
- if (ubase_size < sz) {
- ipath_cdbg(PROC,
- "Base size %zu, need %zu (version mismatch?)\n",
- ubase_size, sz);
- ret = -EINVAL;
- goto bail;
- }
-
- kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL);
- if (kinfo == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- ret = dd->ipath_f_get_base_info(pd, kinfo);
- if (ret < 0)
- goto bail;
-
- kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt;
- kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize;
- kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt;
- kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize;
- /*
- * have to mmap whole thing
- */
- kinfo->spi_rcv_egrbuftotlen =
- pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
- kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
- kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
- pd->port_rcvegrbuf_chunks;
- kinfo->spi_tidcnt = dd->ipath_rcvtidcnt / subport_cnt;
- if (master)
- kinfo->spi_tidcnt += dd->ipath_rcvtidcnt % subport_cnt;
- /*
- * for this use, may be ipath_cfgports summed over all chips that
- * are are configured and present
- */
- kinfo->spi_nports = dd->ipath_cfgports;
- /* unit (chip/board) our port is on */
- kinfo->spi_unit = dd->ipath_unit;
- /* for now, only a single page */
- kinfo->spi_tid_maxsize = PAGE_SIZE;
-
- /*
- * Doing this per port, and based on the skip value, etc. This has
- * to be the actual buffer size, since the protocol code treats it
- * as an array.
- *
- * These have to be set to user addresses in the user code via mmap.
- * These values are used on return to user code for the mmap target
- * addresses only. For 32 bit, same 44 bit address problem, so use
- * the physical address, not virtual. Before 2.6.11, using the
- * page_address() macro worked, but in 2.6.11, even that returns the
- * full 64 bit address (upper bits all 1's). So far, using the
- * physical addresses (or chip offsets, for chip mapping) works, but
- * no doubt some future kernel release will change that, and we'll be
- * on to yet another method of dealing with this.
- */
- kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
- kinfo->spi_rcvhdr_tailaddr = (u64) pd->port_rcvhdrqtailaddr_phys;
- kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
- kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
- kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
- (void *) dd->ipath_statusp -
- (void *) dd->ipath_pioavailregs_dma;
- if (!shared) {
- kinfo->spi_piocnt = pd->port_piocnt;
- kinfo->spi_piobufbase = (u64) pd->port_piobufs;
- kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
- dd->ipath_ureg_align * pd->port_port;
- } else if (master) {
- kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
- (pd->port_piocnt % subport_cnt);
- /* Master's PIO buffers are after all the slave's */
- kinfo->spi_piobufbase = (u64) pd->port_piobufs +
- dd->ipath_palign *
- (pd->port_piocnt - kinfo->spi_piocnt);
- } else {
- unsigned slave = subport_fp(fp) - 1;
-
- kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
- kinfo->spi_piobufbase = (u64) pd->port_piobufs +
- dd->ipath_palign * kinfo->spi_piocnt * slave;
- }
-
- if (shared) {
- kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
- dd->ipath_ureg_align * pd->port_port;
- kinfo->spi_port_rcvegrbuf = kinfo->spi_rcv_egrbufs;
- kinfo->spi_port_rcvhdr_base = kinfo->spi_rcvhdr_base;
- kinfo->spi_port_rcvhdr_tailaddr = kinfo->spi_rcvhdr_tailaddr;
-
- kinfo->__spi_uregbase = cvt_kvaddr(pd->subport_uregbase +
- PAGE_SIZE * subport_fp(fp));
-
- kinfo->spi_rcvhdr_base = cvt_kvaddr(pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport_fp(fp));
- kinfo->spi_rcvhdr_tailaddr = 0;
- kinfo->spi_rcv_egrbufs = cvt_kvaddr(pd->subport_rcvegrbuf +
- pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size *
- subport_fp(fp));
-
- kinfo->spi_subport_uregbase =
- cvt_kvaddr(pd->subport_uregbase);
- kinfo->spi_subport_rcvegrbuf =
- cvt_kvaddr(pd->subport_rcvegrbuf);
- kinfo->spi_subport_rcvhdr_base =
- cvt_kvaddr(pd->subport_rcvhdr_base);
- ipath_cdbg(PROC, "port %u flags %x %llx %llx %llx\n",
- kinfo->spi_port, kinfo->spi_runtime_flags,
- (unsigned long long) kinfo->spi_subport_uregbase,
- (unsigned long long) kinfo->spi_subport_rcvegrbuf,
- (unsigned long long) kinfo->spi_subport_rcvhdr_base);
- }
-
- /*
- * All user buffers are 2KB buffers. If we ever support
- * giving 4KB buffers to user processes, this will need some
- * work.
- */
- kinfo->spi_pioindex = (kinfo->spi_piobufbase -
- (dd->ipath_piobufbase & 0xffffffff)) / dd->ipath_palign;
- kinfo->spi_pioalign = dd->ipath_palign;
-
- kinfo->spi_qpair = IPATH_KD_QP;
- /*
- * user mode PIO buffers are always 2KB, even when 4KB can
- * be received, and sent via the kernel; this is ibmaxlen
- * for 2K MTU.
- */
- kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
- kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
- kinfo->spi_port = pd->port_port;
- kinfo->spi_subport = subport_fp(fp);
- kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
- kinfo->spi_hw_version = dd->ipath_revision;
-
- if (master) {
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_MASTER;
- }
-
- sz = (ubase_size < sizeof(*kinfo)) ? ubase_size : sizeof(*kinfo);
- if (copy_to_user(ubase, kinfo, sz))
- ret = -EFAULT;
-
-bail:
- kfree(kinfo);
- return ret;
-}
-
-/**
- * ipath_tid_update - update a port TID
- * @pd: the port
- * @fp: the ipath device file
- * @ti: the TID information
- *
- * The new implementation as of Oct 2004 is that the driver assigns
- * the tid and returns it to the caller. To make it easier to
- * catch bugs, and to reduce search time, we keep a cursor for
- * each port, walking the shadow tid array to find one that's not
- * in use.
- *
- * For now, if we can't allocate the full list, we fail, although
- * in the long run, we'll allocate as many as we can, and the
- * caller will deal with that by trying the remaining pages later.
- * That means that when we fail, we have to mark the tids as not in
- * use again, in our shadow copy.
- *
- * It's up to the caller to free the tids when they are done.
- * We'll unlock the pages as they free them.
- *
- * Also, right now we are locking one page at a time, but since
- * the intended use of this routine is for a single group of
- * virtually contiguous pages, that should change to improve
- * performance.
- */
-static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
- const struct ipath_tid_info *ti)
-{
- int ret = 0, ntids;
- u32 tid, porttid, cnt, i, tidcnt, tidoff;
- u16 *tidlist;
- struct ipath_devdata *dd = pd->port_dd;
- u64 physaddr;
- unsigned long vaddr;
- u64 __iomem *tidbase;
- unsigned long tidmap[8];
- struct page **pagep = NULL;
- unsigned subport = subport_fp(fp);
-
- if (!dd->ipath_pageshadow) {
- ret = -ENOMEM;
- goto done;
- }
-
- cnt = ti->tidcnt;
- if (!cnt) {
- ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
- (unsigned long long) ti->tidlist);
- /*
- * Should we treat as success? likely a bug
- */
- ret = -EFAULT;
- goto done;
- }
- porttid = pd->port_port * dd->ipath_rcvtidcnt;
- if (!pd->port_subport_cnt) {
- tidcnt = dd->ipath_rcvtidcnt;
- tid = pd->port_tidcursor;
- tidoff = 0;
- } else if (!subport) {
- tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
- (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
- tidoff = dd->ipath_rcvtidcnt - tidcnt;
- porttid += tidoff;
- tid = tidcursor_fp(fp);
- } else {
- tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
- tidoff = tidcnt * (subport - 1);
- porttid += tidoff;
- tid = tidcursor_fp(fp);
- }
- if (cnt > tidcnt) {
- /* make sure it all fits in port_tid_pg_list */
- dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
- "TIDs, only trying max (%u)\n", cnt, tidcnt);
- cnt = tidcnt;
- }
- pagep = &((struct page **) pd->port_tid_pg_list)[tidoff];
- tidlist = &((u16 *) &pagep[dd->ipath_rcvtidcnt])[tidoff];
-
- memset(tidmap, 0, sizeof(tidmap));
- /* before decrement; chip actual # */
- ntids = tidcnt;
- tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- porttid * sizeof(*tidbase));
-
- ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n",
- pd->port_port, cnt, tid, tidbase);
-
- /* virtual address of first page in transfer */
- vaddr = ti->tidvaddr;
- if (!access_ok(VERIFY_WRITE, (void __user *) vaddr,
- cnt * PAGE_SIZE)) {
- ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
- (void *)vaddr, cnt);
- ret = -EFAULT;
- goto done;
- }
- ret = ipath_get_user_pages(vaddr, cnt, pagep);
- if (ret) {
- if (ret == -EBUSY) {
- ipath_dbg("Failed to lock addr %p, %u pages "
- "(already locked)\n",
- (void *) vaddr, cnt);
- /*
- * for now, continue, and see what happens but with
- * the new implementation, this should never happen,
- * unless perhaps the user has mpin'ed the pages
- * themselves (something we need to test)
- */
- ret = 0;
- } else {
- dev_info(&dd->pcidev->dev,
- "Failed to lock addr %p, %u pages: "
- "errno %d\n", (void *) vaddr, cnt, -ret);
- goto done;
- }
- }
- for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
- for (; ntids--; tid++) {
- if (tid == tidcnt)
- tid = 0;
- if (!dd->ipath_pageshadow[porttid + tid])
- break;
- }
- if (ntids < 0) {
- /*
- * oops, wrapped all the way through their TIDs,
- * and didn't have enough free; see comments at
- * start of routine
- */
- ipath_dbg("Not enough free TIDs for %u pages "
- "(index %d), failing\n", cnt, i);
- i--; /* last tidlist[i] not filled in */
- ret = -ENOMEM;
- break;
- }
- tidlist[i] = tid + tidoff;
- ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
- "vaddr %lx\n", i, tid + tidoff, vaddr);
- /* we "know" system pages and TID pages are same size */
- dd->ipath_pageshadow[porttid + tid] = pagep[i];
- dd->ipath_physshadow[porttid + tid] = ipath_map_page(
- dd->pcidev, pagep[i], 0, PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- /*
- * don't need atomic or it's overhead
- */
- __set_bit(tid, tidmap);
- physaddr = dd->ipath_physshadow[porttid + tid];
- ipath_stats.sps_pagelocks++;
- ipath_cdbg(VERBOSE,
- "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
- tid, vaddr, (unsigned long long) physaddr,
- pagep[i]);
- dd->ipath_f_put_tid(dd, &tidbase[tid], RCVHQ_RCV_TYPE_EXPECTED,
- physaddr);
- /*
- * don't check this tid in ipath_portshadow, since we
- * just filled it in; start with the next one.
- */
- tid++;
- }
-
- if (ret) {
- u32 limit;
- cleanup:
- /* jump here if copy out of updated info failed... */
- ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
- -ret, i, cnt);
- /* same code that's in ipath_free_tid() */
- limit = sizeof(tidmap) * BITS_PER_BYTE;
- if (limit > tidcnt)
- /* just in case size changes in future */
- limit = tidcnt;
- tid = find_first_bit((const unsigned long *)tidmap, limit);
- for (; tid < limit; tid++) {
- if (!test_bit(tid, tidmap))
- continue;
- if (dd->ipath_pageshadow[porttid + tid]) {
- ipath_cdbg(VERBOSE, "Freeing TID %u\n",
- tid);
- dd->ipath_f_put_tid(dd, &tidbase[tid],
- RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
- pci_unmap_page(dd->pcidev,
- dd->ipath_physshadow[porttid + tid],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- dd->ipath_pageshadow[porttid + tid] = NULL;
- ipath_stats.sps_pageunlocks++;
- }
- }
- ipath_release_user_pages(pagep, cnt);
- } else {
- /*
- * Copy the updated array, with ipath_tid's filled in, back
- * to user. Since we did the copy in already, this "should
- * never fail" If it does, we have to clean up...
- */
- if (copy_to_user((void __user *)
- (unsigned long) ti->tidlist,
- tidlist, cnt * sizeof(*tidlist))) {
- ret = -EFAULT;
- goto cleanup;
- }
- if (copy_to_user((void __user *) (unsigned long) ti->tidmap,
- tidmap, sizeof tidmap)) {
- ret = -EFAULT;
- goto cleanup;
- }
- if (tid == tidcnt)
- tid = 0;
- if (!pd->port_subport_cnt)
- pd->port_tidcursor = tid;
- else
- tidcursor_fp(fp) = tid;
- }
-
-done:
- if (ret)
- ipath_dbg("Failed to map %u TID pages, failing with %d\n",
- ti->tidcnt, -ret);
- return ret;
-}
-
-/**
- * ipath_tid_free - free a port TID
- * @pd: the port
- * @subport: the subport
- * @ti: the TID info
- *
- * right now we are unlocking one page at a time, but since
- * the intended use of this routine is for a single group of
- * virtually contiguous pages, that should change to improve
- * performance. We check that the TID is in range for this port
- * but otherwise don't check validity; if user has an error and
- * frees the wrong tid, it's only their own data that can thereby
- * be corrupted. We do check that the TID was in use, for sanity
- * We always use our idea of the saved address, not the address that
- * they pass in to us.
- */
-
-static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
- const struct ipath_tid_info *ti)
-{
- int ret = 0;
- u32 tid, porttid, cnt, limit, tidcnt;
- struct ipath_devdata *dd = pd->port_dd;
- u64 __iomem *tidbase;
- unsigned long tidmap[8];
-
- if (!dd->ipath_pageshadow) {
- ret = -ENOMEM;
- goto done;
- }
-
- if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap,
- sizeof tidmap)) {
- ret = -EFAULT;
- goto done;
- }
-
- porttid = pd->port_port * dd->ipath_rcvtidcnt;
- if (!pd->port_subport_cnt)
- tidcnt = dd->ipath_rcvtidcnt;
- else if (!subport) {
- tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
- (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
- porttid += dd->ipath_rcvtidcnt - tidcnt;
- } else {
- tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
- porttid += tidcnt * (subport - 1);
- }
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- porttid * sizeof(*tidbase));
-
- limit = sizeof(tidmap) * BITS_PER_BYTE;
- if (limit > tidcnt)
- /* just in case size changes in future */
- limit = tidcnt;
- tid = find_first_bit(tidmap, limit);
- ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) "
- "set is %d, porttid %u\n", pd->port_port, ti->tidcnt,
- limit, tid, porttid);
- for (cnt = 0; tid < limit; tid++) {
- /*
- * small optimization; if we detect a run of 3 or so without
- * any set, use find_first_bit again. That's mainly to
- * accelerate the case where we wrapped, so we have some at
- * the beginning, and some at the end, and a big gap
- * in the middle.
- */
- if (!test_bit(tid, tidmap))
- continue;
- cnt++;
- if (dd->ipath_pageshadow[porttid + tid]) {
- struct page *p;
- p = dd->ipath_pageshadow[porttid + tid];
- dd->ipath_pageshadow[porttid + tid] = NULL;
- ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
- pid_nr(pd->port_pid), tid);
- dd->ipath_f_put_tid(dd, &tidbase[tid],
- RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
- pci_unmap_page(dd->pcidev,
- dd->ipath_physshadow[porttid + tid],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages(&p, 1);
- ipath_stats.sps_pageunlocks++;
- } else
- ipath_dbg("Unused tid %u, ignoring\n", tid);
- }
- if (cnt != ti->tidcnt)
- ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
- ti->tidcnt, cnt);
-done:
- if (ret)
- ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
- ti->tidcnt, -ret);
- return ret;
-}
-
-/**
- * ipath_set_part_key - set a partition key
- * @pd: the port
- * @key: the key
- *
- * We can have up to 4 active at a time (other than the default, which is
- * always allowed). This is somewhat tricky, since multiple ports may set
- * the same key, so we reference count them, and clean up at exit. All 4
- * partition keys are packed into a single infinipath register. It's an
- * error for a process to set the same pkey multiple times. We provide no
- * mechanism to de-allocate a pkey at this time, we may eventually need to
- * do that. I've used the atomic operations, and no locking, and only make
- * a single pass through what's available. This should be more than
- * adequate for some time. I'll think about spinlocks or the like if and as
- * it's necessary.
- */
-static int ipath_set_part_key(struct ipath_portdata *pd, u16 key)
-{
- struct ipath_devdata *dd = pd->port_dd;
- int i, any = 0, pidx = -1;
- u16 lkey = key & 0x7FFF;
- int ret;
-
- if (lkey == (IPATH_DEFAULT_P_KEY & 0x7FFF)) {
- /* nothing to do; this key always valid */
- ret = 0;
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys "
- "%hx:%x %hx:%x %hx:%x %hx:%x\n",
- pd->port_port, key, dd->ipath_pkeys[0],
- atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
- atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
- atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
- atomic_read(&dd->ipath_pkeyrefs[3]));
-
- if (!lkey) {
- ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n",
- pd->port_port);
- ret = -EINVAL;
- goto bail;
- }
-
- /*
- * Set the full membership bit, because it has to be
- * set in the register or the packet, and it seems
- * cleaner to set in the register than to force all
- * callers to set it. (see bug 4331)
- */
- key |= 0x8000;
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- if (!pd->port_pkeys[i] && pidx == -1)
- pidx = i;
- if (pd->port_pkeys[i] == key) {
- ipath_cdbg(VERBOSE, "p%u tries to set same pkey "
- "(%x) more than once\n",
- pd->port_port, key);
- ret = -EEXIST;
- goto bail;
- }
- }
- if (pidx == -1) {
- ipath_dbg("All pkeys for port %u already in use, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
- goto bail;
- }
- for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i]) {
- any++;
- continue;
- }
- if (dd->ipath_pkeys[i] == key) {
- atomic_t *pkrefs = &dd->ipath_pkeyrefs[i];
-
- if (atomic_inc_return(pkrefs) > 1) {
- pd->port_pkeys[pidx] = key;
- ipath_cdbg(VERBOSE, "p%u set key %x "
- "matches #%d, count now %d\n",
- pd->port_port, key, i,
- atomic_read(pkrefs));
- ret = 0;
- goto bail;
- } else {
- /*
- * lost race, decrement count, catch below
- */
- atomic_dec(pkrefs);
- ipath_cdbg(VERBOSE, "Lost race, count was "
- "0, after dec, it's %d\n",
- atomic_read(pkrefs));
- any++;
- }
- }
- if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
- /*
- * It makes no sense to have both the limited and
- * full membership PKEY set at the same time since
- * the unlimited one will disable the limited one.
- */
- ret = -EEXIST;
- goto bail;
- }
- }
- if (!any) {
- ipath_dbg("port %u, all pkeys already in use, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
- goto bail;
- }
- for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i] &&
- atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
- u64 pkey;
-
- /* for ipathstats, etc. */
- ipath_stats.sps_pkeys[i] = lkey;
- pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
- pkey =
- (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(PROC, "p%u set key %x in #%d, "
- "portidx %d, new pkey reg %llx\n",
- pd->port_port, key, i, pidx,
- (unsigned long long) pkey);
- ipath_write_kreg(
- dd, dd->ipath_kregs->kr_partitionkey, pkey);
-
- ret = 0;
- goto bail;
- }
- }
- ipath_dbg("port %u, all pkeys already in use 2nd pass, "
- "can't set %x\n", pd->port_port, key);
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_manage_rcvq - manage a port's receive queue
- * @pd: the port
- * @subport: the subport
- * @start_stop: action to carry out
- *
- * start_stop == 0 disables receive on the port, for use in queue
- * overflow conditions. start_stop==1 re-enables, to be used to
- * re-init the software copy of the head register
- */
-static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
- int start_stop)
-{
- struct ipath_devdata *dd = pd->port_dd;
-
- ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
- start_stop ? "en" : "dis", dd->ipath_unit,
- pd->port_port, subport);
- if (subport)
- goto bail;
- /* atomically clear receive enable port. */
- if (start_stop) {
- /*
- * On enable, force in-memory copy of the tail register to
- * 0, so that protocol code doesn't have to worry about
- * whether or not the chip has yet updated the in-memory
- * copy or not on return from the system call. The chip
- * always resets it's tail register back to 0 on a
- * transition from disabled to enabled. This could cause a
- * problem if software was broken, and did the enable w/o
- * the disable, but eventually the in-memory copy will be
- * updated and correct itself, even in the face of software
- * bugs.
- */
- if (pd->port_rcvhdrtail_kvaddr)
- ipath_clear_rcvhdrtail(pd);
- set_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- } else
- clear_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* now be sure chip saw it before we return */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- if (start_stop) {
- /*
- * And try to be sure that tail reg update has happened too.
- * This should in theory interlock with the RXE changes to
- * the tail register. Don't assign it to the tail register
- * in memory copy, since we could overwrite an update by the
- * chip if we did.
- */
- ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
- }
- /* always; new head should be equal to new tail; see above */
-bail:
- return 0;
-}
-
-static void ipath_clean_part_key(struct ipath_portdata *pd,
- struct ipath_devdata *dd)
-{
- int i, j, pchanged = 0;
- u64 oldpkey;
-
- /* for debugging only */
- oldpkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- if (!pd->port_pkeys[i])
- continue;
- ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i,
- pd->port_pkeys[i]);
- for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) {
- /* check for match independent of the global bit */
- if ((dd->ipath_pkeys[j] & 0x7fff) !=
- (pd->port_pkeys[i] & 0x7fff))
- continue;
- if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
- ipath_cdbg(VERBOSE, "p%u clear key "
- "%x matches #%d\n",
- pd->port_port,
- pd->port_pkeys[i], j);
- ipath_stats.sps_pkeys[j] =
- dd->ipath_pkeys[j] = 0;
- pchanged++;
- }
- else ipath_cdbg(
- VERBOSE, "p%u key %x matches #%d, "
- "but ref still %d\n", pd->port_port,
- pd->port_pkeys[i], j,
- atomic_read(&dd->ipath_pkeyrefs[j]));
- break;
- }
- pd->port_pkeys[i] = 0;
- }
- if (pchanged) {
- u64 pkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, "
- "new pkey reg %llx\n", pd->port_port,
- (unsigned long long) oldpkey,
- (unsigned long long) pkey);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
- pkey);
- }
-}
-
-/*
- * Initialize the port data with the receive buffer sizes
- * so this can be done while the master port is locked.
- * Otherwise, there is a race with a slave opening the port
- * and seeing these fields uninitialized.
- */
-static void init_user_egr_sizes(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned egrperchunk, egrcnt, size;
-
- /*
- * to avoid wasting a lot of memory, we allocate 32KB chunks of
- * physically contiguous memory, advance through it until used up
- * and then allocate more. Of course, we need memory to store those
- * extra pointers, now. Started out with 256KB, but under heavy
- * memory pressure (creating large files and then copying them over
- * NFS while doing lots of MPI jobs), we hit some allocation
- * failures, even though we can sleep... (2.6.10) Still get
- * failures at 64K. 32K is the lowest we can go without wasting
- * additional memory.
- */
- size = 0x8000;
- egrperchunk = size / dd->ipath_rcvegrbufsize;
- egrcnt = dd->ipath_rcvegrcnt;
- pd->port_rcvegrbuf_chunks = (egrcnt + egrperchunk - 1) / egrperchunk;
- pd->port_rcvegrbufs_perchunk = egrperchunk;
- pd->port_rcvegrbuf_size = size;
-}
-
-/**
- * ipath_create_user_egr - allocate eager TID buffers
- * @pd: the port to allocate TID buffers for
- *
- * This routine is now quite different for user and kernel, because
- * the kernel uses skb's, for the accelerated network performance
- * This is the user port version
- *
- * Allocate the eager TID buffers and program them into infinipath
- * They are no longer completely contiguous, we do multiple allocation
- * calls.
- */
-static int ipath_create_user_egr(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
- size_t size;
- int ret;
- gfp_t gfp_flags;
-
- /*
- * GFP_USER, but without GFP_FS, so buffer cache can be
- * coalesced (we hope); otherwise, even at order 4,
- * heavy filesystem activity makes these fail, and we can
- * use compound pages.
- */
- gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
-
- egrcnt = dd->ipath_rcvegrcnt;
- /* TID number offset for this port */
- egroff = (pd->port_port - 1) * egrcnt + dd->ipath_p0_rcvegrcnt;
- egrsize = dd->ipath_rcvegrbufsize;
- ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
- "offset %x, egrsize %u\n", egrcnt, egroff, egrsize);
-
- chunk = pd->port_rcvegrbuf_chunks;
- egrperchunk = pd->port_rcvegrbufs_perchunk;
- size = pd->port_rcvegrbuf_size;
- pd->port_rcvegrbuf = kmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]),
- GFP_KERNEL);
- if (!pd->port_rcvegrbuf) {
- ret = -ENOMEM;
- goto bail;
- }
- pd->port_rcvegrbuf_phys =
- kmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]),
- GFP_KERNEL);
- if (!pd->port_rcvegrbuf_phys) {
- ret = -ENOMEM;
- goto bail_rcvegrbuf;
- }
- for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
-
- pd->port_rcvegrbuf[e] = dma_alloc_coherent(
- &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
- gfp_flags);
-
- if (!pd->port_rcvegrbuf[e]) {
- ret = -ENOMEM;
- goto bail_rcvegrbuf_phys;
- }
- }
-
- pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0];
-
- for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
- dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk];
- unsigned i;
-
- for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
- dd->ipath_f_put_tid(dd, e + egroff +
- (u64 __iomem *)
- ((char __iomem *)
- dd->ipath_kregbase +
- dd->ipath_rcvegrbase),
- RCVHQ_RCV_TYPE_EAGER, pa);
- pa += egrsize;
- }
- cond_resched(); /* don't hog the cpu */
- }
-
- ret = 0;
- goto bail;
-
-bail_rcvegrbuf_phys:
- for (e = 0; e < pd->port_rcvegrbuf_chunks &&
- pd->port_rcvegrbuf[e]; e++) {
- dma_free_coherent(&dd->pcidev->dev, size,
- pd->port_rcvegrbuf[e],
- pd->port_rcvegrbuf_phys[e]);
-
- }
- kfree(pd->port_rcvegrbuf_phys);
- pd->port_rcvegrbuf_phys = NULL;
-bail_rcvegrbuf:
- kfree(pd->port_rcvegrbuf);
- pd->port_rcvegrbuf = NULL;
-bail:
- return ret;
-}
-
-
-/* common code for the mappings on dma_alloc_coherent mem */
-static int ipath_mmap_mem(struct vm_area_struct *vma,
- struct ipath_portdata *pd, unsigned len, int write_ok,
- void *kvaddr, char *what)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned long pfn;
- int ret;
-
- if ((vma->vm_end - vma->vm_start) > len) {
- dev_info(&dd->pcidev->dev,
- "FAIL on %s: len %lx > %x\n", what,
- vma->vm_end - vma->vm_start, len);
- ret = -EFAULT;
- goto bail;
- }
-
- if (!write_ok) {
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev,
- "%s must be mapped readonly\n", what);
- ret = -EPERM;
- goto bail;
- }
-
- /* don't allow them to later change with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
- }
-
- pfn = virt_to_phys(kvaddr) >> PAGE_SHIFT;
- ret = remap_pfn_range(vma, vma->vm_start, pfn,
- len, vma->vm_page_prot);
- if (ret)
- dev_info(&dd->pcidev->dev, "%s port%u mmap of %lx, %x "
- "bytes r%c failed: %d\n", what, pd->port_port,
- pfn, len, write_ok?'w':'o', ret);
- else
- ipath_cdbg(VERBOSE, "%s port%u mmaped %lx, %x bytes "
- "r%c\n", what, pd->port_port, pfn, len,
- write_ok?'w':'o');
-bail:
- return ret;
-}
-
-static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
- u64 ureg)
-{
- unsigned long phys;
- int ret;
-
- /*
- * This is real hardware, so use io_remap. This is the mechanism
- * for the user process to update the head registers for their port
- * in the chip.
- */
- if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
- dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
- "%lx > PAGE\n", vma->vm_end - vma->vm_start);
- ret = -EFAULT;
- } else {
- phys = dd->ipath_physaddr + ureg;
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
- ret = io_remap_pfn_range(vma, vma->vm_start,
- phys >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
- }
- return ret;
-}
-
-static int mmap_piobufs(struct vm_area_struct *vma,
- struct ipath_devdata *dd,
- struct ipath_portdata *pd,
- unsigned piobufs, unsigned piocnt)
-{
- unsigned long phys;
- int ret;
-
- /*
- * When we map the PIO buffers in the chip, we want to map them as
- * writeonly, no read possible. This prevents access to previous
- * process data, and catches users who might try to read the i/o
- * space due to a bug.
- */
- if ((vma->vm_end - vma->vm_start) > (piocnt * dd->ipath_palign)) {
- dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
- "reqlen %lx > PAGE\n",
- vma->vm_end - vma->vm_start);
- ret = -EINVAL;
- goto bail;
- }
-
- phys = dd->ipath_physaddr + piobufs;
-
-#if defined(__powerpc__)
- /* There isn't a generic way to specify writethrough mappings */
- pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- pgprot_val(vma->vm_page_prot) |= _PAGE_WRITETHRU;
- pgprot_val(vma->vm_page_prot) &= ~_PAGE_GUARDED;
-#endif
-
- /*
- * don't allow them to later change to readable with mprotect (for when
- * not initially mapped readable, as is normally the case)
- */
- vma->vm_flags &= ~VM_MAYREAD;
- vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
-
- ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-bail:
- return ret;
-}
-
-static int mmap_rcvegrbufs(struct vm_area_struct *vma,
- struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- unsigned long start, size;
- size_t total_size, i;
- unsigned long pfn;
- int ret;
-
- size = pd->port_rcvegrbuf_size;
- total_size = pd->port_rcvegrbuf_chunks * size;
- if ((vma->vm_end - vma->vm_start) > total_size) {
- dev_info(&dd->pcidev->dev, "FAIL on egr bufs: "
- "reqlen %lx > actual %lx\n",
- vma->vm_end - vma->vm_start,
- (unsigned long) total_size);
- ret = -EINVAL;
- goto bail;
- }
-
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev, "Can't map eager buffers as "
- "writable (flags=%lx)\n", vma->vm_flags);
- ret = -EPERM;
- goto bail;
- }
- /* don't allow them to later change to writeable with mprotect */
- vma->vm_flags &= ~VM_MAYWRITE;
-
- start = vma->vm_start;
-
- for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
- pfn = virt_to_phys(pd->port_rcvegrbuf[i]) >> PAGE_SHIFT;
- ret = remap_pfn_range(vma, start, pfn, size,
- vma->vm_page_prot);
- if (ret < 0)
- goto bail;
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/*
- * ipath_file_vma_fault - handle a VMA page fault.
- */
-static int ipath_file_vma_fault(struct vm_area_struct *vma,
- struct vm_fault *vmf)
-{
- struct page *page;
-
- page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT));
- if (!page)
- return VM_FAULT_SIGBUS;
- get_page(page);
- vmf->page = page;
-
- return 0;
-}
-
-static const struct vm_operations_struct ipath_file_vm_ops = {
- .fault = ipath_file_vma_fault,
-};
-
-static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr,
- struct ipath_portdata *pd, unsigned subport)
-{
- unsigned long len;
- struct ipath_devdata *dd;
- void *addr;
- size_t size;
- int ret = 0;
-
- /* If the port is not shared, all addresses should be physical */
- if (!pd->port_subport_cnt)
- goto bail;
-
- dd = pd->port_dd;
- size = pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
-
- /*
- * Each process has all the subport uregbase, rcvhdrq, and
- * rcvegrbufs mmapped - as an array for all the processes,
- * and also separately for this process.
- */
- if (pgaddr == cvt_kvaddr(pd->subport_uregbase)) {
- addr = pd->subport_uregbase;
- size = PAGE_SIZE * pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base)) {
- addr = pd->subport_rcvhdr_base;
- size = pd->port_rcvhdrq_size * pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf)) {
- addr = pd->subport_rcvegrbuf;
- size *= pd->port_subport_cnt;
- } else if (pgaddr == cvt_kvaddr(pd->subport_uregbase +
- PAGE_SIZE * subport)) {
- addr = pd->subport_uregbase + PAGE_SIZE * subport;
- size = PAGE_SIZE;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport)) {
- addr = pd->subport_rcvhdr_base +
- pd->port_rcvhdrq_size * subport;
- size = pd->port_rcvhdrq_size;
- } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf +
- size * subport)) {
- addr = pd->subport_rcvegrbuf + size * subport;
- /* rcvegrbufs are read-only on the slave */
- if (vma->vm_flags & VM_WRITE) {
- dev_info(&dd->pcidev->dev,
- "Can't map eager buffers as "
- "writable (flags=%lx)\n", vma->vm_flags);
- ret = -EPERM;
- goto bail;
- }
- /*
- * Don't allow permission to later change to writeable
- * with mprotect.
- */
- vma->vm_flags &= ~VM_MAYWRITE;
- } else {
- goto bail;
- }
- len = vma->vm_end - vma->vm_start;
- if (len > size) {
- ipath_cdbg(MM, "FAIL: reqlen %lx > %zx\n", len, size);
- ret = -EINVAL;
- goto bail;
- }
-
- vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT;
- vma->vm_ops = &ipath_file_vm_ops;
- vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_mmap - mmap various structures into user space
- * @fp: the file pointer
- * @vma: the VM area
- *
- * We use this to have a shared buffer between the kernel and the user code
- * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
- * buffers in the chip. We have the open and close entries so we can bump
- * the ref count and keep the driver from being unloaded while still mapped.
- */
-static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
-{
- struct ipath_portdata *pd;
- struct ipath_devdata *dd;
- u64 pgaddr, ureg;
- unsigned piobufs, piocnt;
- int ret;
-
- pd = port_fp(fp);
- if (!pd) {
- ret = -EINVAL;
- goto bail;
- }
- dd = pd->port_dd;
-
- /*
- * This is the ipath_do_user_init() code, mapping the shared buffers
- * into the user process. The address referred to by vm_pgoff is the
- * file offset passed via mmap(). For shared ports, this is the
- * kernel vmalloc() address of the pages to share with the master.
- * For non-shared or master ports, this is a physical address.
- * We only do one mmap for each space mapped.
- */
- pgaddr = vma->vm_pgoff << PAGE_SHIFT;
-
- /*
- * Check for 0 in case one of the allocations failed, but user
- * called mmap anyway.
- */
- if (!pgaddr) {
- ret = -EINVAL;
- goto bail;
- }
-
- ipath_cdbg(MM, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
- (unsigned long long) pgaddr, vma->vm_start,
- vma->vm_end - vma->vm_start, dd->ipath_unit,
- pd->port_port, subport_fp(fp));
-
- /*
- * Physical addresses must fit in 40 bits for our hardware.
- * Check for kernel virtual addresses first, anything else must
- * match a HW or memory address.
- */
- ret = mmap_kvaddr(vma, pgaddr, pd, subport_fp(fp));
- if (ret) {
- if (ret > 0)
- ret = 0;
- goto bail;
- }
-
- ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
- if (!pd->port_subport_cnt) {
- /* port is not shared */
- piocnt = pd->port_piocnt;
- piobufs = pd->port_piobufs;
- } else if (!subport_fp(fp)) {
- /* caller is the master */
- piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
- (pd->port_piocnt % pd->port_subport_cnt);
- piobufs = pd->port_piobufs +
- dd->ipath_palign * (pd->port_piocnt - piocnt);
- } else {
- unsigned slave = subport_fp(fp) - 1;
-
- /* caller is a slave */
- piocnt = pd->port_piocnt / pd->port_subport_cnt;
- piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
- }
-
- if (pgaddr == ureg)
- ret = mmap_ureg(vma, dd, ureg);
- else if (pgaddr == piobufs)
- ret = mmap_piobufs(vma, dd, pd, piobufs, piocnt);
- else if (pgaddr == dd->ipath_pioavailregs_phys)
- /* in-memory copy of pioavail registers */
- ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
- (void *) dd->ipath_pioavailregs_dma,
- "pioavail registers");
- else if (pgaddr == pd->port_rcvegr_phys)
- ret = mmap_rcvegrbufs(vma, pd);
- else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
- /*
- * The rcvhdrq itself; readonly except on HT (so have
- * to allow writable mapping), multiple pages, contiguous
- * from an i/o perspective.
- */
- ret = ipath_mmap_mem(vma, pd, pd->port_rcvhdrq_size, 1,
- pd->port_rcvhdrq,
- "rcvhdrq");
- else if (pgaddr == (u64) pd->port_rcvhdrqtailaddr_phys)
- /* in-memory copy of rcvhdrq tail register */
- ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
- pd->port_rcvhdrtail_kvaddr,
- "rcvhdrq tail");
- else
- ret = -EINVAL;
-
- vma->vm_private_data = NULL;
-
- if (ret < 0)
- dev_info(&dd->pcidev->dev,
- "Failure %d on off %llx len %lx\n",
- -ret, (unsigned long long)pgaddr,
- vma->vm_end - vma->vm_start);
-bail:
- return ret;
-}
-
-static unsigned ipath_poll_hdrqfull(struct ipath_portdata *pd)
-{
- unsigned pollflag = 0;
-
- if ((pd->poll_type & IPATH_POLL_TYPE_OVERFLOW) &&
- pd->port_hdrqfull != pd->port_hdrqfull_poll) {
- pollflag |= POLLIN | POLLRDNORM;
- pd->port_hdrqfull_poll = pd->port_hdrqfull;
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll_urgent(struct ipath_portdata *pd,
- struct file *fp,
- struct poll_table_struct *pt)
-{
- unsigned pollflag = 0;
- struct ipath_devdata *dd;
-
- dd = pd->port_dd;
-
- /* variable access in ipath_poll_hdrqfull() needs this */
- rmb();
- pollflag = ipath_poll_hdrqfull(pd);
-
- if (pd->port_urgent != pd->port_urgent_poll) {
- pollflag |= POLLIN | POLLRDNORM;
- pd->port_urgent_poll = pd->port_urgent;
- }
-
- if (!pollflag) {
- /* this saves a spin_lock/unlock in interrupt handler... */
- set_bit(IPATH_PORT_WAITING_URG, &pd->port_flag);
- /* flush waiting flag so don't miss an event... */
- wmb();
- poll_wait(fp, &pd->port_wait, pt);
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll_next(struct ipath_portdata *pd,
- struct file *fp,
- struct poll_table_struct *pt)
-{
- u32 head;
- u32 tail;
- unsigned pollflag = 0;
- struct ipath_devdata *dd;
-
- dd = pd->port_dd;
-
- /* variable access in ipath_poll_hdrqfull() needs this */
- rmb();
- pollflag = ipath_poll_hdrqfull(pd);
-
- head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
- if (pd->port_rcvhdrtail_kvaddr)
- tail = ipath_get_rcvhdrtail(pd);
- else
- tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
-
- if (head != tail)
- pollflag |= POLLIN | POLLRDNORM;
- else {
- /* this saves a spin_lock/unlock in interrupt handler */
- set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
- /* flush waiting flag so we don't miss an event */
- wmb();
-
- set_bit(pd->port_port + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- if (dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off | head,
- pd->port_port);
-
- poll_wait(fp, &pd->port_wait, pt);
- }
-
- return pollflag;
-}
-
-static unsigned int ipath_poll(struct file *fp,
- struct poll_table_struct *pt)
-{
- struct ipath_portdata *pd;
- unsigned pollflag;
-
- pd = port_fp(fp);
- if (!pd)
- pollflag = 0;
- else if (pd->poll_type & IPATH_POLL_TYPE_URGENT)
- pollflag = ipath_poll_urgent(pd, fp, pt);
- else
- pollflag = ipath_poll_next(pd, fp, pt);
-
- return pollflag;
-}
-
-static int ipath_supports_subports(int user_swmajor, int user_swminor)
-{
- /* no subport implementation prior to software version 1.3 */
- return (user_swmajor > 1) || (user_swminor >= 3);
-}
-
-static int ipath_compatible_subports(int user_swmajor, int user_swminor)
-{
- /* this code is written long-hand for clarity */
- if (IPATH_USER_SWMAJOR != user_swmajor) {
- /* no promise of compatibility if major mismatch */
- return 0;
- }
- if (IPATH_USER_SWMAJOR == 1) {
- switch (IPATH_USER_SWMINOR) {
- case 0:
- case 1:
- case 2:
- /* no subport implementation so cannot be compatible */
- return 0;
- case 3:
- /* 3 is only compatible with itself */
- return user_swminor == 3;
- default:
- /* >= 4 are compatible (or are expected to be) */
- return user_swminor >= 4;
- }
- }
- /* make no promises yet for future major versions */
- return 0;
-}
-
-static int init_subports(struct ipath_devdata *dd,
- struct ipath_portdata *pd,
- const struct ipath_user_info *uinfo)
-{
- int ret = 0;
- unsigned num_subports;
- size_t size;
-
- /*
- * If the user is requesting zero subports,
- * skip the subport allocation.
- */
- if (uinfo->spu_subport_cnt <= 0)
- goto bail;
-
- /* Self-consistency check for ipath_compatible_subports() */
- if (ipath_supports_subports(IPATH_USER_SWMAJOR, IPATH_USER_SWMINOR) &&
- !ipath_compatible_subports(IPATH_USER_SWMAJOR,
- IPATH_USER_SWMINOR)) {
- dev_info(&dd->pcidev->dev,
- "Inconsistent ipath_compatible_subports()\n");
- goto bail;
- }
-
- /* Check for subport compatibility */
- if (!ipath_compatible_subports(uinfo->spu_userversion >> 16,
- uinfo->spu_userversion & 0xffff)) {
- dev_info(&dd->pcidev->dev,
- "Mismatched user version (%d.%d) and driver "
- "version (%d.%d) while port sharing. Ensure "
- "that driver and library are from the same "
- "release.\n",
- (int) (uinfo->spu_userversion >> 16),
- (int) (uinfo->spu_userversion & 0xffff),
- IPATH_USER_SWMAJOR,
- IPATH_USER_SWMINOR);
- goto bail;
- }
- if (uinfo->spu_subport_cnt > INFINIPATH_MAX_SUBPORT) {
- ret = -EINVAL;
- goto bail;
- }
-
- num_subports = uinfo->spu_subport_cnt;
- pd->subport_uregbase = vzalloc(PAGE_SIZE * num_subports);
- if (!pd->subport_uregbase) {
- ret = -ENOMEM;
- goto bail;
- }
- /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
- size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
- sizeof(u32), PAGE_SIZE) * num_subports;
- pd->subport_rcvhdr_base = vzalloc(size);
- if (!pd->subport_rcvhdr_base) {
- ret = -ENOMEM;
- goto bail_ureg;
- }
-
- pd->subport_rcvegrbuf = vzalloc(pd->port_rcvegrbuf_chunks *
- pd->port_rcvegrbuf_size *
- num_subports);
- if (!pd->subport_rcvegrbuf) {
- ret = -ENOMEM;
- goto bail_rhdr;
- }
-
- pd->port_subport_cnt = uinfo->spu_subport_cnt;
- pd->port_subport_id = uinfo->spu_subport_id;
- pd->active_slaves = 1;
- set_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
- goto bail;
-
-bail_rhdr:
- vfree(pd->subport_rcvhdr_base);
-bail_ureg:
- vfree(pd->subport_uregbase);
- pd->subport_uregbase = NULL;
-bail:
- return ret;
-}
-
-static int try_alloc_port(struct ipath_devdata *dd, int port,
- struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- struct ipath_portdata *pd;
- int ret;
-
- if (!(pd = dd->ipath_pd[port])) {
- void *ptmp;
-
- pd = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
-
- /*
- * Allocate memory for use in ipath_tid_update() just once
- * at open, not per call. Reduces cost of expected send
- * setup.
- */
- ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
- dd->ipath_rcvtidcnt * sizeof(struct page **),
- GFP_KERNEL);
- if (!pd || !ptmp) {
- ipath_dev_err(dd, "Unable to allocate portdata "
- "memory, failing open\n");
- ret = -ENOMEM;
- kfree(pd);
- kfree(ptmp);
- goto bail;
- }
- dd->ipath_pd[port] = pd;
- dd->ipath_pd[port]->port_port = port;
- dd->ipath_pd[port]->port_dd = dd;
- dd->ipath_pd[port]->port_tid_pg_list = ptmp;
- init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
- }
- if (!pd->port_cnt) {
- pd->userversion = uinfo->spu_userversion;
- init_user_egr_sizes(pd);
- if ((ret = init_subports(dd, pd, uinfo)) != 0)
- goto bail;
- ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
- current->comm, current->pid, dd->ipath_unit,
- port);
- pd->port_cnt = 1;
- port_fp(fp) = pd;
- pd->port_pid = get_pid(task_pid(current));
- strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
- ipath_stats.sps_ports++;
- ret = 0;
- } else
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-static inline int usable(struct ipath_devdata *dd)
-{
- return dd &&
- (dd->ipath_flags & IPATH_PRESENT) &&
- dd->ipath_kregbase &&
- dd->ipath_lid &&
- !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED
- | IPATH_LINKUNK));
-}
-
-static int find_free_port(int unit, struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- struct ipath_devdata *dd = ipath_lookup(unit);
- int ret, i;
-
- if (!dd) {
- ret = -ENODEV;
- goto bail;
- }
-
- if (!usable(dd)) {
- ret = -ENETDOWN;
- goto bail;
- }
-
- for (i = 1; i < dd->ipath_cfgports; i++) {
- ret = try_alloc_port(dd, i, fp, uinfo);
- if (ret != -EBUSY)
- goto bail;
- }
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-static int find_best_unit(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret = 0, i, prefunit = -1, devmax;
- int maxofallports, npresent, nup;
- int ndev;
-
- devmax = ipath_count_units(&npresent, &nup, &maxofallports);
-
- /*
- * This code is present to allow a knowledgeable person to
- * specify the layout of processes to processors before opening
- * this driver, and then we'll assign the process to the "closest"
- * InfiniPath chip to that processor (we assume reasonable connectivity,
- * for now). This code assumes that if affinity has been set
- * before this point, that at most one cpu is set; for now this
- * is reasonable. I check for both cpumask_empty() and cpumask_full(),
- * in case some kernel variant sets none of the bits when no
- * affinity is set. 2.6.11 and 12 kernels have all present
- * cpus set. Some day we'll have to fix it up further to handle
- * a cpu subset. This algorithm fails for two HT chips connected
- * in tunnel fashion. Eventually this needs real topology
- * information. There may be some issues with dual core numbering
- * as well. This needs more work prior to release.
- */
- if (!cpumask_empty(tsk_cpus_allowed(current)) &&
- !cpumask_full(tsk_cpus_allowed(current))) {
- int ncpus = num_online_cpus(), curcpu = -1, nset = 0;
- get_online_cpus();
- for_each_online_cpu(i)
- if (cpumask_test_cpu(i, tsk_cpus_allowed(current))) {
- ipath_cdbg(PROC, "%s[%u] affinity set for "
- "cpu %d/%d\n", current->comm,
- current->pid, i, ncpus);
- curcpu = i;
- nset++;
- }
- put_online_cpus();
- if (curcpu != -1 && nset != ncpus) {
- if (npresent) {
- prefunit = curcpu / (ncpus / npresent);
- ipath_cdbg(PROC,"%s[%u] %d chips, %d cpus, "
- "%d cpus/chip, select unit %d\n",
- current->comm, current->pid,
- npresent, ncpus, ncpus / npresent,
- prefunit);
- }
- }
- }
-
- /*
- * user ports start at 1, kernel port is 0
- * For now, we do round-robin access across all chips
- */
-
- if (prefunit != -1)
- devmax = prefunit + 1;
-recheck:
- for (i = 1; i < maxofallports; i++) {
- for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
- ndev++) {
- struct ipath_devdata *dd = ipath_lookup(ndev);
-
- if (!usable(dd))
- continue; /* can't use this unit */
- if (i >= dd->ipath_cfgports)
- /*
- * Maxed out on users of this unit. Try
- * next.
- */
- continue;
- ret = try_alloc_port(dd, i, fp, uinfo);
- if (!ret)
- goto done;
- }
- }
-
- if (npresent) {
- if (nup == 0) {
- ret = -ENETDOWN;
- ipath_dbg("No ports available (none initialized "
- "and ready)\n");
- } else {
- if (prefunit > 0) {
- /* if started above 0, retry from 0 */
- ipath_cdbg(PROC,
- "%s[%u] no ports on prefunit "
- "%d, clear and re-check\n",
- current->comm, current->pid,
- prefunit);
- devmax = ipath_count_units(NULL, NULL,
- NULL);
- prefunit = -1;
- goto recheck;
- }
- ret = -EBUSY;
- ipath_dbg("No ports available\n");
- }
- } else {
- ret = -ENXIO;
- ipath_dbg("No boards found\n");
- }
-
-done:
- return ret;
-}
-
-static int find_shared_port(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int devmax, ndev, i;
- int ret = 0;
-
- devmax = ipath_count_units(NULL, NULL, NULL);
-
- for (ndev = 0; ndev < devmax; ndev++) {
- struct ipath_devdata *dd = ipath_lookup(ndev);
-
- if (!usable(dd))
- continue;
- for (i = 1; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- /* Skip ports which are not yet open */
- if (!pd || !pd->port_cnt)
- continue;
- /* Skip port if it doesn't match the requested one */
- if (pd->port_subport_id != uinfo->spu_subport_id)
- continue;
- /* Verify the sharing process matches the master */
- if (pd->port_subport_cnt != uinfo->spu_subport_cnt ||
- pd->userversion != uinfo->spu_userversion ||
- pd->port_cnt >= pd->port_subport_cnt) {
- ret = -EINVAL;
- goto done;
- }
- port_fp(fp) = pd;
- subport_fp(fp) = pd->port_cnt++;
- pd->port_subpid[subport_fp(fp)] =
- get_pid(task_pid(current));
- tidcursor_fp(fp) = 0;
- pd->active_slaves |= 1 << subport_fp(fp);
- ipath_cdbg(PROC,
- "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
- current->comm, current->pid,
- subport_fp(fp),
- pd->port_comm, pid_nr(pd->port_pid),
- dd->ipath_unit, pd->port_port);
- ret = 1;
- goto done;
- }
- }
-
-done:
- return ret;
-}
-
-static int ipath_open(struct inode *in, struct file *fp)
-{
- /* The real work is performed later in ipath_assign_port() */
- fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
- return fp->private_data ? 0 : -ENOMEM;
-}
-
-/* Get port early, so can set affinity prior to memory allocation */
-static int ipath_assign_port(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret;
- int i_minor;
- unsigned swmajor, swminor;
-
- /* Check to be sure we haven't already initialized this file */
- if (port_fp(fp)) {
- ret = -EINVAL;
- goto done;
- }
-
- /* for now, if major version is different, bail */
- swmajor = uinfo->spu_userversion >> 16;
- if (swmajor != IPATH_USER_SWMAJOR) {
- ipath_dbg("User major version %d not same as driver "
- "major %d\n", uinfo->spu_userversion >> 16,
- IPATH_USER_SWMAJOR);
- ret = -ENODEV;
- goto done;
- }
-
- swminor = uinfo->spu_userversion & 0xffff;
- if (swminor != IPATH_USER_SWMINOR)
- ipath_dbg("User minor version %d not same as driver "
- "minor %d\n", swminor, IPATH_USER_SWMINOR);
-
- mutex_lock(&ipath_mutex);
-
- if (ipath_compatible_subports(swmajor, swminor) &&
- uinfo->spu_subport_cnt &&
- (ret = find_shared_port(fp, uinfo))) {
- if (ret > 0)
- ret = 0;
- goto done_chk_sdma;
- }
-
- i_minor = iminor(file_inode(fp)) - IPATH_USER_MINOR_BASE;
- ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
- (long)file_inode(fp)->i_rdev, i_minor);
-
- if (i_minor)
- ret = find_free_port(i_minor - 1, fp, uinfo);
- else
- ret = find_best_unit(fp, uinfo);
-
-done_chk_sdma:
- if (!ret) {
- struct ipath_filedata *fd = fp->private_data;
- const struct ipath_portdata *pd = fd->pd;
- const struct ipath_devdata *dd = pd->port_dd;
-
- fd->pq = ipath_user_sdma_queue_create(&dd->pcidev->dev,
- dd->ipath_unit,
- pd->port_port,
- fd->subport);
-
- if (!fd->pq)
- ret = -ENOMEM;
- }
-
- mutex_unlock(&ipath_mutex);
-
-done:
- return ret;
-}
-
-
-static int ipath_do_user_init(struct file *fp,
- const struct ipath_user_info *uinfo)
-{
- int ret;
- struct ipath_portdata *pd = port_fp(fp);
- struct ipath_devdata *dd;
- u32 head32;
-
- /* Subports don't need to initialize anything since master did it. */
- if (subport_fp(fp)) {
- ret = wait_event_interruptible(pd->port_wait,
- !test_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag));
- goto done;
- }
-
- dd = pd->port_dd;
-
- if (uinfo->spu_rcvhdrsize) {
- ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
- if (ret)
- goto done;
- }
-
- /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
-
- /* some ports may get extra buffers, calculate that here */
- if (pd->port_port <= dd->ipath_ports_extrabuf)
- pd->port_piocnt = dd->ipath_pbufsport + 1;
- else
- pd->port_piocnt = dd->ipath_pbufsport;
-
- /* for right now, kernel piobufs are at end, so port 1 is at 0 */
- if (pd->port_port <= dd->ipath_ports_extrabuf)
- pd->port_pio_base = (dd->ipath_pbufsport + 1)
- * (pd->port_port - 1);
- else
- pd->port_pio_base = dd->ipath_ports_extrabuf +
- dd->ipath_pbufsport * (pd->port_port - 1);
- pd->port_piobufs = dd->ipath_piobufbase +
- pd->port_pio_base * dd->ipath_palign;
- ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
- " first pio %u\n", pd->port_port, pd->port_piobufs,
- pd->port_piocnt, pd->port_pio_base);
- ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);
-
- /*
- * Now allocate the rcvhdr Q and eager TIDs; skip the TID
- * array for time being. If pd->port_port > chip-supported,
- * we need to do extra stuff here to handle by handling overflow
- * through port 0, someday
- */
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = ipath_create_user_egr(pd);
- if (ret)
- goto done;
-
- /*
- * set the eager head register for this port to the current values
- * of the tail pointers, since we don't know if they were
- * updated on last use of the port.
- */
- head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
- ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
- pd->port_lastrcvhdrqtail = -1;
- ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
- pd->port_port, head32);
- pd->port_tidcursor = 0; /* start at beginning after open */
-
- /* initialize poll variables... */
- pd->port_urgent = 0;
- pd->port_urgent_poll = 0;
- pd->port_hdrqfull_poll = pd->port_hdrqfull;
-
- /*
- * Now enable the port for receive.
- * For chips that are set to DMA the tail register to memory
- * when they change (and when the update bit transitions from
- * 0 to 1. So for those chips, we turn it off and then back on.
- * This will (very briefly) affect any other open ports, but the
- * duration is very short, and therefore isn't an issue. We
- * explicitly set the in-memory tail copy to 0 beforehand, so we
- * don't have to wait to be sure the DMA update has happened
- * (chip resets head/tail to 0 on transition to enable).
- */
- set_bit(dd->ipath_r_portenable_shift + pd->port_port,
- &dd->ipath_rcvctrl);
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
- if (pd->port_rcvhdrtail_kvaddr)
- ipath_clear_rcvhdrtail(pd);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl &
- ~(1ULL << dd->ipath_r_tailupd_shift));
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* Notify any waiting slaves */
- if (pd->port_subport_cnt) {
- clear_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
- wake_up(&pd->port_wait);
- }
-done:
- return ret;
-}
-
-/**
- * unlock_exptid - unlock any expected TID entries port still had in use
- * @pd: port
- *
- * We don't actually update the chip here, because we do a bulk update
- * below, using ipath_f_clear_tids.
- */
-static void unlock_expected_tids(struct ipath_portdata *pd)
-{
- struct ipath_devdata *dd = pd->port_dd;
- int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt;
- int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt;
-
- ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
- pd->port_port);
- for (i = port_tidbase; i < maxtid; i++) {
- struct page *ps = dd->ipath_pageshadow[i];
-
- if (!ps)
- continue;
-
- dd->ipath_pageshadow[i] = NULL;
- pci_unmap_page(dd->pcidev, dd->ipath_physshadow[i],
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages_on_close(&ps, 1);
- cnt++;
- ipath_stats.sps_pageunlocks++;
- }
- if (cnt)
- ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n",
- pd->port_port, cnt);
-
- if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks)
- ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n",
- (unsigned long long) ipath_stats.sps_pagelocks,
- (unsigned long long)
- ipath_stats.sps_pageunlocks);
-}
-
-static int ipath_close(struct inode *in, struct file *fp)
-{
- int ret = 0;
- struct ipath_filedata *fd;
- struct ipath_portdata *pd;
- struct ipath_devdata *dd;
- unsigned long flags;
- unsigned port;
- struct pid *pid;
-
- ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n",
- (long)in->i_rdev, fp->private_data);
-
- mutex_lock(&ipath_mutex);
-
- fd = fp->private_data;
- fp->private_data = NULL;
- pd = fd->pd;
- if (!pd) {
- mutex_unlock(&ipath_mutex);
- goto bail;
- }
-
- dd = pd->port_dd;
-
- /* drain user sdma queue */
- ipath_user_sdma_queue_drain(dd, fd->pq);
- ipath_user_sdma_queue_destroy(fd->pq);
-
- if (--pd->port_cnt) {
- /*
- * XXX If the master closes the port before the slave(s),
- * revoke the mmap for the eager receive queue so
- * the slave(s) don't wait for receive data forever.
- */
- pd->active_slaves &= ~(1 << fd->subport);
- put_pid(pd->port_subpid[fd->subport]);
- pd->port_subpid[fd->subport] = NULL;
- mutex_unlock(&ipath_mutex);
- goto bail;
- }
- /* early; no interrupt users after this */
- spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
- port = pd->port_port;
- dd->ipath_pd[port] = NULL;
- pid = pd->port_pid;
- pd->port_pid = NULL;
- spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
-
- if (pd->port_rcvwait_to || pd->port_piowait_to
- || pd->port_rcvnowait || pd->port_pionowait) {
- ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; "
- "%u rcv %u, pio already\n",
- pd->port_port, pd->port_rcvwait_to,
- pd->port_piowait_to, pd->port_rcvnowait,
- pd->port_pionowait);
- pd->port_rcvwait_to = pd->port_piowait_to =
- pd->port_rcvnowait = pd->port_pionowait = 0;
- }
- if (pd->port_flag) {
- ipath_cdbg(PROC, "port %u port_flag set: 0x%lx\n",
- pd->port_port, pd->port_flag);
- pd->port_flag = 0;
- }
-
- if (dd->ipath_kregbase) {
- /* atomically clear receive enable port and intr avail. */
- clear_bit(dd->ipath_r_portenable_shift + port,
- &dd->ipath_rcvctrl);
- clear_bit(pd->port_port + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
- ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- /* and read back from chip to be sure that nothing
- * else is in flight when we do the rest */
- (void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- /* clean up the pkeys for this port user */
- ipath_clean_part_key(pd, dd);
- /*
- * be paranoid, and never write 0's to these, just use an
- * unused part of the port 0 tail page. Of course,
- * rcvhdraddr points to a large chunk of memory, so this
- * could still trash things, but at least it won't trash
- * page 0, and by disabling the port, it should stop "soon",
- * even if a packet or two is in already in flight after we
- * disabled the port.
- */
- ipath_write_kreg_port(dd,
- dd->ipath_kregs->kr_rcvhdrtailaddr, port,
- dd->ipath_dummy_hdrq_phys);
- ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
- pd->port_port, dd->ipath_dummy_hdrq_phys);
-
- ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
- ipath_chg_pioavailkernel(dd, pd->port_pio_base,
- pd->port_piocnt, 1);
-
- dd->ipath_f_clear_tids(dd, pd->port_port);
-
- if (dd->ipath_pageshadow)
- unlock_expected_tids(pd);
- ipath_stats.sps_ports--;
- ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
- pd->port_comm, pid_nr(pid),
- dd->ipath_unit, port);
- }
-
- put_pid(pid);
- mutex_unlock(&ipath_mutex);
- ipath_free_pddata(dd, pd); /* after releasing the mutex */
-
-bail:
- kfree(fd);
- return ret;
-}
-
-static int ipath_port_info(struct ipath_portdata *pd, u16 subport,
- struct ipath_port_info __user *uinfo)
-{
- struct ipath_port_info info;
- int nup;
- int ret;
- size_t sz;
-
- (void) ipath_count_units(NULL, &nup, NULL);
- info.num_active = nup;
- info.unit = pd->port_dd->ipath_unit;
- info.port = pd->port_port;
- info.subport = subport;
- /* Don't return new fields if old library opened the port. */
- if (ipath_supports_subports(pd->userversion >> 16,
- pd->userversion & 0xffff)) {
- /* Number of user ports available for this device. */
- info.num_ports = pd->port_dd->ipath_cfgports - 1;
- info.num_subports = pd->port_subport_cnt;
- sz = sizeof(info);
- } else
- sz = sizeof(info) - 2 * sizeof(u16);
-
- if (copy_to_user(uinfo, &info, sz)) {
- ret = -EFAULT;
- goto bail;
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_get_slave_info(struct ipath_portdata *pd,
- void __user *slave_mask_addr)
-{
- int ret = 0;
-
- if (copy_to_user(slave_mask_addr, &pd->active_slaves, sizeof(u32)))
- ret = -EFAULT;
- return ret;
-}
-
-static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue *pq,
- u32 __user *inflightp)
-{
- const u32 val = ipath_user_sdma_inflight_counter(pq);
-
- if (put_user(val, inflightp))
- return -EFAULT;
-
- return 0;
-}
-
-static int ipath_sdma_get_complete(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- u32 __user *completep)
-{
- u32 val;
- int err;
-
- err = ipath_user_sdma_make_progress(dd, pq);
- if (err < 0)
- return err;
-
- val = ipath_user_sdma_complete_counter(pq);
- if (put_user(val, completep))
- return -EFAULT;
-
- return 0;
-}
-
-static ssize_t ipath_write(struct file *fp, const char __user *data,
- size_t count, loff_t *off)
-{
- const struct ipath_cmd __user *ucmd;
- struct ipath_portdata *pd;
- const void __user *src;
- size_t consumed, copy;
- struct ipath_cmd cmd;
- ssize_t ret = 0;
- void *dest;
-
- if (count < sizeof(cmd.type)) {
- ret = -EINVAL;
- goto bail;
- }
-
- ucmd = (const struct ipath_cmd __user *) data;
-
- if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) {
- ret = -EFAULT;
- goto bail;
- }
-
- consumed = sizeof(cmd.type);
-
- switch (cmd.type) {
- case IPATH_CMD_ASSIGN_PORT:
- case __IPATH_CMD_USER_INIT:
- case IPATH_CMD_USER_INIT:
- copy = sizeof(cmd.cmd.user_info);
- dest = &cmd.cmd.user_info;
- src = &ucmd->cmd.user_info;
- break;
- case IPATH_CMD_RECV_CTRL:
- copy = sizeof(cmd.cmd.recv_ctrl);
- dest = &cmd.cmd.recv_ctrl;
- src = &ucmd->cmd.recv_ctrl;
- break;
- case IPATH_CMD_PORT_INFO:
- copy = sizeof(cmd.cmd.port_info);
- dest = &cmd.cmd.port_info;
- src = &ucmd->cmd.port_info;
- break;
- case IPATH_CMD_TID_UPDATE:
- case IPATH_CMD_TID_FREE:
- copy = sizeof(cmd.cmd.tid_info);
- dest = &cmd.cmd.tid_info;
- src = &ucmd->cmd.tid_info;
- break;
- case IPATH_CMD_SET_PART_KEY:
- copy = sizeof(cmd.cmd.part_key);
- dest = &cmd.cmd.part_key;
- src = &ucmd->cmd.part_key;
- break;
- case __IPATH_CMD_SLAVE_INFO:
- copy = sizeof(cmd.cmd.slave_mask_addr);
- dest = &cmd.cmd.slave_mask_addr;
- src = &ucmd->cmd.slave_mask_addr;
- break;
- case IPATH_CMD_PIOAVAILUPD: // force an update of PIOAvail reg
- copy = 0;
- src = NULL;
- dest = NULL;
- break;
- case IPATH_CMD_POLL_TYPE:
- copy = sizeof(cmd.cmd.poll_type);
- dest = &cmd.cmd.poll_type;
- src = &ucmd->cmd.poll_type;
- break;
- case IPATH_CMD_ARMLAUNCH_CTRL:
- copy = sizeof(cmd.cmd.armlaunch_ctrl);
- dest = &cmd.cmd.armlaunch_ctrl;
- src = &ucmd->cmd.armlaunch_ctrl;
- break;
- case IPATH_CMD_SDMA_INFLIGHT:
- copy = sizeof(cmd.cmd.sdma_inflight);
- dest = &cmd.cmd.sdma_inflight;
- src = &ucmd->cmd.sdma_inflight;
- break;
- case IPATH_CMD_SDMA_COMPLETE:
- copy = sizeof(cmd.cmd.sdma_complete);
- dest = &cmd.cmd.sdma_complete;
- src = &ucmd->cmd.sdma_complete;
- break;
- default:
- ret = -EINVAL;
- goto bail;
- }
-
- if (copy) {
- if ((count - consumed) < copy) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (copy_from_user(dest, src, copy)) {
- ret = -EFAULT;
- goto bail;
- }
-
- consumed += copy;
- }
-
- pd = port_fp(fp);
- if (!pd && cmd.type != __IPATH_CMD_USER_INIT &&
- cmd.type != IPATH_CMD_ASSIGN_PORT) {
- ret = -EINVAL;
- goto bail;
- }
-
- switch (cmd.type) {
- case IPATH_CMD_ASSIGN_PORT:
- ret = ipath_assign_port(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- break;
- case __IPATH_CMD_USER_INIT:
- /* backwards compatibility, get port first */
- ret = ipath_assign_port(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- /* and fall through to current version. */
- case IPATH_CMD_USER_INIT:
- ret = ipath_do_user_init(fp, &cmd.cmd.user_info);
- if (ret)
- goto bail;
- ret = ipath_get_base_info(
- fp, (void __user *) (unsigned long)
- cmd.cmd.user_info.spu_base_info,
- cmd.cmd.user_info.spu_base_info_size);
- break;
- case IPATH_CMD_RECV_CTRL:
- ret = ipath_manage_rcvq(pd, subport_fp(fp), cmd.cmd.recv_ctrl);
- break;
- case IPATH_CMD_PORT_INFO:
- ret = ipath_port_info(pd, subport_fp(fp),
- (struct ipath_port_info __user *)
- (unsigned long) cmd.cmd.port_info);
- break;
- case IPATH_CMD_TID_UPDATE:
- ret = ipath_tid_update(pd, fp, &cmd.cmd.tid_info);
- break;
- case IPATH_CMD_TID_FREE:
- ret = ipath_tid_free(pd, subport_fp(fp), &cmd.cmd.tid_info);
- break;
- case IPATH_CMD_SET_PART_KEY:
- ret = ipath_set_part_key(pd, cmd.cmd.part_key);
- break;
- case __IPATH_CMD_SLAVE_INFO:
- ret = ipath_get_slave_info(pd,
- (void __user *) (unsigned long)
- cmd.cmd.slave_mask_addr);
- break;
- case IPATH_CMD_PIOAVAILUPD:
- ipath_force_pio_avail_update(pd->port_dd);
- break;
- case IPATH_CMD_POLL_TYPE:
- pd->poll_type = cmd.cmd.poll_type;
- break;
- case IPATH_CMD_ARMLAUNCH_CTRL:
- if (cmd.cmd.armlaunch_ctrl)
- ipath_enable_armlaunch(pd->port_dd);
- else
- ipath_disable_armlaunch(pd->port_dd);
- break;
- case IPATH_CMD_SDMA_INFLIGHT:
- ret = ipath_sdma_get_inflight(user_sdma_queue_fp(fp),
- (u32 __user *) (unsigned long)
- cmd.cmd.sdma_inflight);
- break;
- case IPATH_CMD_SDMA_COMPLETE:
- ret = ipath_sdma_get_complete(pd->port_dd,
- user_sdma_queue_fp(fp),
- (u32 __user *) (unsigned long)
- cmd.cmd.sdma_complete);
- break;
- }
-
- if (ret >= 0)
- ret = consumed;
-
-bail:
- return ret;
-}
-
-static ssize_t ipath_write_iter(struct kiocb *iocb, struct iov_iter *from)
-{
- struct file *filp = iocb->ki_filp;
- struct ipath_filedata *fp = filp->private_data;
- struct ipath_portdata *pd = port_fp(filp);
- struct ipath_user_sdma_queue *pq = fp->pq;
-
- if (!iter_is_iovec(from) || !from->nr_segs)
- return -EINVAL;
-
- return ipath_user_sdma_writev(pd->port_dd, pq, from->iov, from->nr_segs);
-}
-
-static struct class *ipath_class;
-
-static int init_cdev(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp)
-{
- const dev_t dev = MKDEV(IPATH_MAJOR, minor);
- struct cdev *cdev = NULL;
- struct device *device = NULL;
- int ret;
-
- cdev = cdev_alloc();
- if (!cdev) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not allocate cdev for minor %d, %s\n",
- minor, name);
- ret = -ENOMEM;
- goto done;
- }
-
- cdev->owner = THIS_MODULE;
- cdev->ops = fops;
- kobject_set_name(&cdev->kobj, name);
-
- ret = cdev_add(cdev, dev, 1);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME
- ": Could not add cdev for minor %d, %s (err %d)\n",
- minor, name, -ret);
- goto err_cdev;
- }
-
- device = device_create(ipath_class, NULL, dev, NULL, name);
-
- if (IS_ERR(device)) {
- ret = PTR_ERR(device);
- printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
- "device for minor %d, %s (err %d)\n",
- minor, name, -ret);
- goto err_cdev;
- }
-
- goto done;
-
-err_cdev:
- cdev_del(cdev);
- cdev = NULL;
-
-done:
- if (ret >= 0) {
- *cdevp = cdev;
- *devp = device;
- } else {
- *cdevp = NULL;
- *devp = NULL;
- }
-
- return ret;
-}
-
-int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp)
-{
- return init_cdev(minor, name, fops, cdevp, devp);
-}
-
-static void cleanup_cdev(struct cdev **cdevp,
- struct device **devp)
-{
- struct device *dev = *devp;
-
- if (dev) {
- device_unregister(dev);
- *devp = NULL;
- }
-
- if (*cdevp) {
- cdev_del(*cdevp);
- *cdevp = NULL;
- }
-}
-
-void ipath_cdev_cleanup(struct cdev **cdevp,
- struct device **devp)
-{
- cleanup_cdev(cdevp, devp);
-}
-
-static struct cdev *wildcard_cdev;
-static struct device *wildcard_dev;
-
-static const dev_t dev = MKDEV(IPATH_MAJOR, 0);
-
-static int user_init(void)
-{
- int ret;
-
- ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME);
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME ": Could not register "
- "chrdev region (err %d)\n", -ret);
- goto done;
- }
-
- ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME);
-
- if (IS_ERR(ipath_class)) {
- ret = PTR_ERR(ipath_class);
- printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
- "device class (err %d)\n", -ret);
- goto bail;
- }
-
- goto done;
-bail:
- unregister_chrdev_region(dev, IPATH_NMINORS);
-done:
- return ret;
-}
-
-static void user_cleanup(void)
-{
- if (ipath_class) {
- class_destroy(ipath_class);
- ipath_class = NULL;
- }
-
- unregister_chrdev_region(dev, IPATH_NMINORS);
-}
-
-static atomic_t user_count = ATOMIC_INIT(0);
-static atomic_t user_setup = ATOMIC_INIT(0);
-
-int ipath_user_add(struct ipath_devdata *dd)
-{
- char name[10];
- int ret;
-
- if (atomic_inc_return(&user_count) == 1) {
- ret = user_init();
- if (ret < 0) {
- ipath_dev_err(dd, "Unable to set up user support: "
- "error %d\n", -ret);
- goto bail;
- }
- ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
- &wildcard_dev);
- if (ret < 0) {
- ipath_dev_err(dd, "Could not create wildcard "
- "minor: error %d\n", -ret);
- goto bail_user;
- }
-
- atomic_set(&user_setup, 1);
- }
-
- snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
-
- ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
- &dd->user_cdev, &dd->user_dev);
- if (ret < 0)
- ipath_dev_err(dd, "Could not create user minor %d, %s\n",
- dd->ipath_unit + 1, name);
-
- goto bail;
-
-bail_user:
- user_cleanup();
-bail:
- return ret;
-}
-
-void ipath_user_remove(struct ipath_devdata *dd)
-{
- cleanup_cdev(&dd->user_cdev, &dd->user_dev);
-
- if (atomic_dec_return(&user_count) == 0) {
- if (atomic_read(&user_setup) == 0)
- goto bail;
-
- cleanup_cdev(&wildcard_cdev, &wildcard_dev);
- user_cleanup();
-
- atomic_set(&user_setup, 0);
- }
-bail:
- return;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/namei.h>
-#include <linux/slab.h>
-
-#include "ipath_kernel.h"
-
-#define IPATHFS_MAGIC 0x726a77
-
-static struct super_block *ipath_super;
-
-static int ipathfs_mknod(struct inode *dir, struct dentry *dentry,
- umode_t mode, const struct file_operations *fops,
- void *data)
-{
- int error;
- struct inode *inode = new_inode(dir->i_sb);
-
- if (!inode) {
- error = -EPERM;
- goto bail;
- }
-
- inode->i_ino = get_next_ino();
- inode->i_mode = mode;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_private = data;
- if (S_ISDIR(mode)) {
- inode->i_op = &simple_dir_inode_operations;
- inc_nlink(inode);
- inc_nlink(dir);
- }
-
- inode->i_fop = fops;
-
- d_instantiate(dentry, inode);
- error = 0;
-
-bail:
- return error;
-}
-
-static int create_file(const char *name, umode_t mode,
- struct dentry *parent, struct dentry **dentry,
- const struct file_operations *fops, void *data)
-{
- int error;
-
- mutex_lock(&d_inode(parent)->i_mutex);
- *dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(*dentry))
- error = ipathfs_mknod(d_inode(parent), *dentry,
- mode, fops, data);
- else
- error = PTR_ERR(*dentry);
- mutex_unlock(&d_inode(parent)->i_mutex);
-
- return error;
-}
-
-static ssize_t atomic_stats_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- return simple_read_from_buffer(buf, count, ppos, &ipath_stats,
- sizeof ipath_stats);
-}
-
-static const struct file_operations atomic_stats_ops = {
- .read = atomic_stats_read,
- .llseek = default_llseek,
-};
-
-static ssize_t atomic_counters_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct infinipath_counters counters;
- struct ipath_devdata *dd;
-
- dd = file_inode(file)->i_private;
- dd->ipath_f_read_counters(dd, &counters);
-
- return simple_read_from_buffer(buf, count, ppos, &counters,
- sizeof counters);
-}
-
-static const struct file_operations atomic_counters_ops = {
- .read = atomic_counters_read,
- .llseek = default_llseek,
-};
-
-static ssize_t flash_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ipath_devdata *dd;
- ssize_t ret;
- loff_t pos;
- char *tmp;
-
- pos = *ppos;
-
- if ( pos < 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (pos >= sizeof(struct ipath_flash)) {
- ret = 0;
- goto bail;
- }
-
- if (count > sizeof(struct ipath_flash) - pos)
- count = sizeof(struct ipath_flash) - pos;
-
- tmp = kmalloc(count, GFP_KERNEL);
- if (!tmp) {
- ret = -ENOMEM;
- goto bail;
- }
-
- dd = file_inode(file)->i_private;
- if (ipath_eeprom_read(dd, pos, tmp, count)) {
- ipath_dev_err(dd, "failed to read from flash\n");
- ret = -ENXIO;
- goto bail_tmp;
- }
-
- if (copy_to_user(buf, tmp, count)) {
- ret = -EFAULT;
- goto bail_tmp;
- }
-
- *ppos = pos + count;
- ret = count;
-
-bail_tmp:
- kfree(tmp);
-
-bail:
- return ret;
-}
-
-static ssize_t flash_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct ipath_devdata *dd;
- ssize_t ret;
- loff_t pos;
- char *tmp;
-
- pos = *ppos;
-
- if (pos != 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (count != sizeof(struct ipath_flash)) {
- ret = -EINVAL;
- goto bail;
- }
-
- tmp = kmalloc(count, GFP_KERNEL);
- if (!tmp) {
- ret = -ENOMEM;
- goto bail;
- }
-
- if (copy_from_user(tmp, buf, count)) {
- ret = -EFAULT;
- goto bail_tmp;
- }
-
- dd = file_inode(file)->i_private;
- if (ipath_eeprom_write(dd, pos, tmp, count)) {
- ret = -ENXIO;
- ipath_dev_err(dd, "failed to write to flash\n");
- goto bail_tmp;
- }
-
- *ppos = pos + count;
- ret = count;
-
-bail_tmp:
- kfree(tmp);
-
-bail:
- return ret;
-}
-
-static const struct file_operations flash_ops = {
- .read = flash_read,
- .write = flash_write,
- .llseek = default_llseek,
-};
-
-static int create_device_files(struct super_block *sb,
- struct ipath_devdata *dd)
-{
- struct dentry *dir, *tmp;
- char unit[10];
- int ret;
-
- snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
- ret = create_file(unit, S_IFDIR|S_IRUGO|S_IXUGO, sb->s_root, &dir,
- &simple_dir_operations, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s) failed: %d\n", unit, ret);
- goto bail;
- }
-
- ret = create_file("atomic_counters", S_IFREG|S_IRUGO, dir, &tmp,
- &atomic_counters_ops, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s/atomic_counters) "
- "failed: %d\n", unit, ret);
- goto bail;
- }
-
- ret = create_file("flash", S_IFREG|S_IWUSR|S_IRUGO, dir, &tmp,
- &flash_ops, dd);
- if (ret) {
- printk(KERN_ERR "create_file(%s/flash) "
- "failed: %d\n", unit, ret);
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-static int remove_file(struct dentry *parent, char *name)
-{
- struct dentry *tmp;
- int ret;
-
- tmp = lookup_one_len(name, parent, strlen(name));
-
- if (IS_ERR(tmp)) {
- ret = PTR_ERR(tmp);
- goto bail;
- }
-
- spin_lock(&tmp->d_lock);
- if (simple_positive(tmp)) {
- dget_dlock(tmp);
- __d_drop(tmp);
- spin_unlock(&tmp->d_lock);
- simple_unlink(d_inode(parent), tmp);
- } else
- spin_unlock(&tmp->d_lock);
-
- ret = 0;
-bail:
- /*
- * We don't expect clients to care about the return value, but
- * it's there if they need it.
- */
- return ret;
-}
-
-static int remove_device_files(struct super_block *sb,
- struct ipath_devdata *dd)
-{
- struct dentry *dir, *root;
- char unit[10];
- int ret;
-
- root = dget(sb->s_root);
- mutex_lock(&d_inode(root)->i_mutex);
- snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
- dir = lookup_one_len(unit, root, strlen(unit));
-
- if (IS_ERR(dir)) {
- ret = PTR_ERR(dir);
- printk(KERN_ERR "Lookup of %s failed\n", unit);
- goto bail;
- }
-
- remove_file(dir, "flash");
- remove_file(dir, "atomic_counters");
- d_delete(dir);
- ret = simple_rmdir(d_inode(root), dir);
-
-bail:
- mutex_unlock(&d_inode(root)->i_mutex);
- dput(root);
- return ret;
-}
-
-static int ipathfs_fill_super(struct super_block *sb, void *data,
- int silent)
-{
- struct ipath_devdata *dd, *tmp;
- unsigned long flags;
- int ret;
-
- static struct tree_descr files[] = {
- [2] = {"atomic_stats", &atomic_stats_ops, S_IRUGO},
- {""},
- };
-
- ret = simple_fill_super(sb, IPATHFS_MAGIC, files);
- if (ret) {
- printk(KERN_ERR "simple_fill_super failed: %d\n", ret);
- goto bail;
- }
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
- ret = create_device_files(sb, dd);
- if (ret)
- goto bail;
- spin_lock_irqsave(&ipath_devs_lock, flags);
- }
-
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
-bail:
- return ret;
-}
-
-static struct dentry *ipathfs_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- struct dentry *ret;
- ret = mount_single(fs_type, flags, data, ipathfs_fill_super);
- if (!IS_ERR(ret))
- ipath_super = ret->d_sb;
- return ret;
-}
-
-static void ipathfs_kill_super(struct super_block *s)
-{
- kill_litter_super(s);
- ipath_super = NULL;
-}
-
-int ipathfs_add_device(struct ipath_devdata *dd)
-{
- int ret;
-
- if (ipath_super == NULL) {
- ret = 0;
- goto bail;
- }
-
- ret = create_device_files(ipath_super, dd);
-
-bail:
- return ret;
-}
-
-int ipathfs_remove_device(struct ipath_devdata *dd)
-{
- int ret;
-
- if (ipath_super == NULL) {
- ret = 0;
- goto bail;
- }
-
- ret = remove_device_files(ipath_super, dd);
-
-bail:
- return ret;
-}
-
-static struct file_system_type ipathfs_fs_type = {
- .owner = THIS_MODULE,
- .name = "ipathfs",
- .mount = ipathfs_mount,
- .kill_sb = ipathfs_kill_super,
-};
-MODULE_ALIAS_FS("ipathfs");
-
-int __init ipath_init_ipathfs(void)
-{
- return register_filesystem(&ipathfs_fs_type);
-}
-
-void __exit ipath_exit_ipathfs(void)
-{
- unregister_filesystem(&ipathfs_fs_type);
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains all of the code that is specific to the InfiniPath
- * HT chip.
- */
-
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/htirq.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-
-static void ipath_setup_ht_setextled(struct ipath_devdata *, u64, u64);
-
-
-/*
- * This lists the InfiniPath registers, in the actual chip layout.
- * This structure should never be directly accessed.
- *
- * The names are in InterCap form because they're taken straight from
- * the chip specification. Since they're only used in this file, they
- * don't pollute the rest of the source.
-*/
-
-struct _infinipath_do_not_use_kernel_regs {
- unsigned long long Revision;
- unsigned long long Control;
- unsigned long long PageAlign;
- unsigned long long PortCnt;
- unsigned long long DebugPortSelect;
- unsigned long long DebugPort;
- unsigned long long SendRegBase;
- unsigned long long UserRegBase;
- unsigned long long CounterRegBase;
- unsigned long long Scratch;
- unsigned long long ReservedMisc1;
- unsigned long long InterruptConfig;
- unsigned long long IntBlocked;
- unsigned long long IntMask;
- unsigned long long IntStatus;
- unsigned long long IntClear;
- unsigned long long ErrorMask;
- unsigned long long ErrorStatus;
- unsigned long long ErrorClear;
- unsigned long long HwErrMask;
- unsigned long long HwErrStatus;
- unsigned long long HwErrClear;
- unsigned long long HwDiagCtrl;
- unsigned long long MDIO;
- unsigned long long IBCStatus;
- unsigned long long IBCCtrl;
- unsigned long long ExtStatus;
- unsigned long long ExtCtrl;
- unsigned long long GPIOOut;
- unsigned long long GPIOMask;
- unsigned long long GPIOStatus;
- unsigned long long GPIOClear;
- unsigned long long RcvCtrl;
- unsigned long long RcvBTHQP;
- unsigned long long RcvHdrSize;
- unsigned long long RcvHdrCnt;
- unsigned long long RcvHdrEntSize;
- unsigned long long RcvTIDBase;
- unsigned long long RcvTIDCnt;
- unsigned long long RcvEgrBase;
- unsigned long long RcvEgrCnt;
- unsigned long long RcvBufBase;
- unsigned long long RcvBufSize;
- unsigned long long RxIntMemBase;
- unsigned long long RxIntMemSize;
- unsigned long long RcvPartitionKey;
- unsigned long long ReservedRcv[10];
- unsigned long long SendCtrl;
- unsigned long long SendPIOBufBase;
- unsigned long long SendPIOSize;
- unsigned long long SendPIOBufCnt;
- unsigned long long SendPIOAvailAddr;
- unsigned long long TxIntMemBase;
- unsigned long long TxIntMemSize;
- unsigned long long ReservedSend[9];
- unsigned long long SendBufferError;
- unsigned long long SendBufferErrorCONT1;
- unsigned long long SendBufferErrorCONT2;
- unsigned long long SendBufferErrorCONT3;
- unsigned long long ReservedSBE[4];
- unsigned long long RcvHdrAddr0;
- unsigned long long RcvHdrAddr1;
- unsigned long long RcvHdrAddr2;
- unsigned long long RcvHdrAddr3;
- unsigned long long RcvHdrAddr4;
- unsigned long long RcvHdrAddr5;
- unsigned long long RcvHdrAddr6;
- unsigned long long RcvHdrAddr7;
- unsigned long long RcvHdrAddr8;
- unsigned long long ReservedRHA[7];
- unsigned long long RcvHdrTailAddr0;
- unsigned long long RcvHdrTailAddr1;
- unsigned long long RcvHdrTailAddr2;
- unsigned long long RcvHdrTailAddr3;
- unsigned long long RcvHdrTailAddr4;
- unsigned long long RcvHdrTailAddr5;
- unsigned long long RcvHdrTailAddr6;
- unsigned long long RcvHdrTailAddr7;
- unsigned long long RcvHdrTailAddr8;
- unsigned long long ReservedRHTA[7];
- unsigned long long Sync; /* Software only */
- unsigned long long Dump; /* Software only */
- unsigned long long SimVer; /* Software only */
- unsigned long long ReservedSW[5];
- unsigned long long SerdesConfig0;
- unsigned long long SerdesConfig1;
- unsigned long long SerdesStatus;
- unsigned long long XGXSConfig;
- unsigned long long ReservedSW2[4];
-};
-
-struct _infinipath_do_not_use_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 Reserved1;
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 Reserved6;
- __u64 Reserved7;
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
-};
-
-#define IPATH_KREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
-#define IPATH_CREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_counters, field) / sizeof(u64))
-
-static const struct ipath_kregs ipath_ht_kregs = {
- .kr_control = IPATH_KREG_OFFSET(Control),
- .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
- .kr_debugport = IPATH_KREG_OFFSET(DebugPort),
- .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
- .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
- .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
- .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
- .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
- .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
- .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
- .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
- .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
- .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
- .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
- .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
- .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
- .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
- .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
- .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
- .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
- .kr_intclear = IPATH_KREG_OFFSET(IntClear),
- .kr_interruptconfig = IPATH_KREG_OFFSET(InterruptConfig),
- .kr_intmask = IPATH_KREG_OFFSET(IntMask),
- .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
- .kr_mdio = IPATH_KREG_OFFSET(MDIO),
- .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
- .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
- .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
- .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
- .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
- .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
- .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
- .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
- .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
- .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
- .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
- .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
- .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
- .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
- .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
- .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
- .kr_revision = IPATH_KREG_OFFSET(Revision),
- .kr_scratch = IPATH_KREG_OFFSET(Scratch),
- .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
- .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
- .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
- .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
- .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
- .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
- .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
- .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
- .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
- .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
- .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
- .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
- .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
- .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
- /*
- * These should not be used directly via ipath_write_kreg64(),
- * use them with ipath_write_kreg64_port(),
- */
- .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
- .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0)
-};
-
-static const struct ipath_cregs ipath_ht_cregs = {
- .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
- .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
- .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
- .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
- .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
- .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
- .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
- .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
- .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
- .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
- .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
- .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
- /* calc from Reg_CounterRegBase + offset */
- .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
- .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
- .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
- .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
- .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
- .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
- .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
- .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
- .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
- .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
- .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
- .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
- .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
- .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
- .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
- .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
- .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
- .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
- .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
- .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
- .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
-};
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_MASK ((1U<<9)-1)
-#define INFINIPATH_I_RCVURG_SHIFT 0
-#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<9)-1)
-#define INFINIPATH_I_RCVAVAIL_SHIFT 12
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
-#define INFINIPATH_HWE_HTCMEMPARITYERR_MASK 0x3FFFFFULL
-#define INFINIPATH_HWE_HTCLNKABYTE0CRCERR 0x0000000000800000ULL
-#define INFINIPATH_HWE_HTCLNKABYTE1CRCERR 0x0000000001000000ULL
-#define INFINIPATH_HWE_HTCLNKBBYTE0CRCERR 0x0000000002000000ULL
-#define INFINIPATH_HWE_HTCLNKBBYTE1CRCERR 0x0000000004000000ULL
-#define INFINIPATH_HWE_HTCMISCERR4 0x0000000008000000ULL
-#define INFINIPATH_HWE_HTCMISCERR5 0x0000000010000000ULL
-#define INFINIPATH_HWE_HTCMISCERR6 0x0000000020000000ULL
-#define INFINIPATH_HWE_HTCMISCERR7 0x0000000040000000ULL
-#define INFINIPATH_HWE_HTCBUSTREQPARITYERR 0x0000000080000000ULL
-#define INFINIPATH_HWE_HTCBUSTRESPPARITYERR 0x0000000100000000ULL
-#define INFINIPATH_HWE_HTCBUSIREQPARITYERR 0x0000000200000000ULL
-#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
-#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
-#define INFINIPATH_HWE_HTBPLL_FBSLIP 0x0200000000000000ULL
-#define INFINIPATH_HWE_HTBPLL_RFSLIP 0x0400000000000000ULL
-#define INFINIPATH_HWE_HTAPLL_FBSLIP 0x0800000000000000ULL
-#define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL
-#define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL
-
-#define IBA6110_IBCS_LINKTRAININGSTATE_MASK 0xf
-#define IBA6110_IBCS_LINKSTATE_SHIFT 4
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_FREQSEL 0x2
-#define INFINIPATH_EXTS_SERDESSEL 0x4
-#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
-#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000
-
-
-/* TID entries (memory), HT-only */
-#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
-#define INFINIPATH_RT_VALID 0x8000000000000000ULL
-#define INFINIPATH_RT_ADDR_SHIFT 0
-#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFFULL
-#define INFINIPATH_RT_BUFSIZE_SHIFT 48
-
-#define INFINIPATH_R_INTRAVAIL_SHIFT 16
-#define INFINIPATH_R_TAILUPD_SHIFT 31
-
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET 0x7ULL
-
-/*
- * masks and bits that are different in different chips, or present only
- * in one
- */
-static const ipath_err_t infinipath_hwe_htcmemparityerr_mask =
- INFINIPATH_HWE_HTCMEMPARITYERR_MASK;
-static const ipath_err_t infinipath_hwe_htcmemparityerr_shift =
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT;
-
-static const ipath_err_t infinipath_hwe_htclnkabyte0crcerr =
- INFINIPATH_HWE_HTCLNKABYTE0CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkabyte1crcerr =
- INFINIPATH_HWE_HTCLNKABYTE1CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkbbyte0crcerr =
- INFINIPATH_HWE_HTCLNKBBYTE0CRCERR;
-static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
- INFINIPATH_HWE_HTCLNKBBYTE1CRCERR;
-
-#define _IPATH_GPIO_SDA_NUM 1
-#define _IPATH_GPIO_SCL_NUM 0
-
-#define IPATH_GPIO_SDA \
- (1ULL << (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-#define IPATH_GPIO_SCL \
- (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-
-/* keep the code below somewhat more readable; not used elsewhere */
-#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
- infinipath_hwe_htclnkabyte1crcerr)
-#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
- infinipath_hwe_htclnkbbyte1crcerr)
-#define _IPATH_HTLANE0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
- infinipath_hwe_htclnkbbyte0crcerr)
-#define _IPATH_HTLANE1_CRCBITS (infinipath_hwe_htclnkabyte1crcerr | \
- infinipath_hwe_htclnkbbyte1crcerr)
-
-static void hwerr_crcbits(struct ipath_devdata *dd, ipath_err_t hwerrs,
- char *msg, size_t msgl)
-{
- char bitsmsg[64];
- ipath_err_t crcbits = hwerrs &
- (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS);
- /* don't check if 8bit HT */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
- crcbits &= ~infinipath_hwe_htclnkabyte1crcerr;
- /* don't check if 8bit HT */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
- crcbits &= ~infinipath_hwe_htclnkbbyte1crcerr;
- /*
- * we'll want to ignore link errors on link that is
- * not in use, if any. For now, complain about both
- */
- if (crcbits) {
- u16 ctrl0, ctrl1;
- snprintf(bitsmsg, sizeof bitsmsg,
- "[HT%s lane %s CRC (%llx); powercycle to completely clear]",
- !(crcbits & _IPATH_HTLINK1_CRCBITS) ?
- "0 (A)" : (!(crcbits & _IPATH_HTLINK0_CRCBITS)
- ? "1 (B)" : "0+1 (A+B)"),
- !(crcbits & _IPATH_HTLANE1_CRCBITS) ? "0"
- : (!(crcbits & _IPATH_HTLANE0_CRCBITS) ? "1" :
- "0+1"), (unsigned long long) crcbits);
- strlcat(msg, bitsmsg, msgl);
-
- /*
- * print extra info for debugging. slave/primary
- * config word 4, 8 (link control 0, 1)
- */
-
- if (pci_read_config_word(dd->pcidev,
- dd->ipath_ht_slave_off + 0x4,
- &ctrl0))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkctrl0 of slave/primary "
- "config block\n");
- else if (!(ctrl0 & 1 << 6))
- /* not if EOC bit set */
- ipath_dbg("HT linkctrl0 0x%x%s%s\n", ctrl0,
- ((ctrl0 >> 8) & 7) ? " CRC" : "",
- ((ctrl0 >> 4) & 1) ? "linkfail" :
- "");
- if (pci_read_config_word(dd->pcidev,
- dd->ipath_ht_slave_off + 0x8,
- &ctrl1))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkctrl1 of slave/primary "
- "config block\n");
- else if (!(ctrl1 & 1 << 6))
- /* not if EOC bit set */
- ipath_dbg("HT linkctrl1 0x%x%s%s\n", ctrl1,
- ((ctrl1 >> 8) & 7) ? " CRC" : "",
- ((ctrl1 >> 4) & 1) ? "linkfail" :
- "");
-
- /* disable until driver reloaded */
- dd->ipath_hwerrmask &= ~crcbits;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- ipath_dbg("HT crc errs: %s\n", msg);
- } else
- ipath_dbg("ignoring HT crc errors 0x%llx, "
- "not in use\n", (unsigned long long)
- (hwerrs & (_IPATH_HTLINK0_CRCBITS |
- _IPATH_HTLINK1_CRCBITS)));
-}
-
-/* 6110 specific hardware errors... */
-static const struct ipath_hwerror_msgs ipath_6110_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(HTCBUSIREQPARITYERR, "HTC Ireq Parity"),
- INFINIPATH_HWE_MSG(HTCBUSTREQPARITYERR, "HTC Treq Parity"),
- INFINIPATH_HWE_MSG(HTCBUSTRESPPARITYERR, "HTC Tresp Parity"),
- INFINIPATH_HWE_MSG(HTCMISCERR5, "HT core Misc5"),
- INFINIPATH_HWE_MSG(HTCMISCERR6, "HT core Misc6"),
- INFINIPATH_HWE_MSG(HTCMISCERR7, "HT core Misc7"),
- INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
- INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
-};
-
-#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
-#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
- << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
-
-static void ipath_ht_txe_recover(struct ipath_devdata *dd)
-{
- ++ipath_stats.sps_txeparity;
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
-}
-
-
-/**
- * ipath_ht_handle_hwerrors - display hardware errors.
- * @dd: the infinipath device
- * @msg: the output buffer
- * @msgl: the size of the output buffer
- *
- * Use same msg buffer as regular errors to avoid excessive stack
- * use. Most hardware errors are catastrophic, but for right now,
- * we'll print them and continue. We reuse the same message buffer as
- * ipath_handle_errors() to avoid excessive stack usage.
- */
-static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
- size_t msgl)
-{
- ipath_err_t hwerrs;
- u32 bits, ctrl;
- int isfatal = 0;
- char bitsmsg[64];
- int log_idx;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
-
- if (!hwerrs) {
- ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
- /*
- * better than printing cofusing messages
- * This seems to be related to clearing the crc error, or
- * the pll error during init.
- */
- goto bail;
- } else if (hwerrs == -1LL) {
- ipath_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
- goto bail;
- }
- ipath_stats.sps_hwerrs++;
-
- /* Always clear the error status register, except MEMBISTFAIL,
- * regardless of whether we continue or stop using the chip.
- * We want that set so we know it failed, even across driver reload.
- * We'll still ignore it in the hwerrmask. We do this partly for
- * diagnostics, but also for support */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
-
- hwerrs &= dd->ipath_hwerrmask;
-
- /* We log some errors to EEPROM, check if we have any of those. */
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
- if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
- ipath_inc_eeprom_err(dd, log_idx, 1);
-
- /*
- * make sure we get this much out, unless told to be quiet,
- * it's a parity error we may recover from,
- * or it's occurred within the last 5 seconds
- */
- if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
- RXE_EAGER_PARITY)) ||
- (ipath_debug & __IPATH_VERBDBG))
- dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
- dd->ipath_lasthwerror |= hwerrs;
-
- if (hwerrs & ~dd->ipath_hwe_bitsextant)
- ipath_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~dd->ipath_hwe_bitsextant));
-
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
- /*
- * parity errors in send memory are recoverable,
- * just cancel the send (if indicated in * sendbuffererror),
- * count the occurrence, unfreeze (if no other handled
- * hardware error bits are set), and continue. They can
- * occur if a processor speculative read is done to the PIO
- * buffer while we are sending a packet, for example.
- */
- if (hwerrs & TXE_PIO_PARITY) {
- ipath_ht_txe_recover(dd);
- hwerrs &= ~TXE_PIO_PARITY;
- }
-
- if (!hwerrs) {
- ipath_dbg("Clearing freezemode on ignored or "
- "recovered hardware error\n");
- ipath_clear_freeze(dd);
- }
- }
-
- *msg = '\0';
-
- /*
- * may someday want to decode into which bits are which
- * functional area for parity errors, etc.
- */
- if (hwerrs & (infinipath_hwe_htcmemparityerr_mask
- << INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT)) {
- bits = (u32) ((hwerrs >>
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) &
- INFINIPATH_HWE_HTCMEMPARITYERR_MASK);
- snprintf(bitsmsg, sizeof bitsmsg, "[HTC Parity Errs %x] ",
- bits);
- strlcat(msg, bitsmsg, msgl);
- }
-
- ipath_format_hwerrors(hwerrs,
- ipath_6110_hwerror_msgs,
- ARRAY_SIZE(ipath_6110_hwerror_msgs),
- msg, msgl);
-
- if (hwerrs & (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS))
- hwerr_crcbits(dd, hwerrs, msg, msgl);
-
- if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
- strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]",
- msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
- INFINIPATH_HWE_COREPLL_RFSLIP | \
- INFINIPATH_HWE_HTBPLL_FBSLIP | \
- INFINIPATH_HWE_HTBPLL_RFSLIP | \
- INFINIPATH_HWE_HTAPLL_FBSLIP | \
- INFINIPATH_HWE_HTAPLL_RFSLIP)
-
- if (hwerrs & _IPATH_PLL_FAIL) {
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PLL failed (%llx), InfiniPath hardware unusable]",
- (unsigned long long) (hwerrs & _IPATH_PLL_FAIL));
- strlcat(msg, bitsmsg, msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
- /*
- * If it occurs, it is left masked since the eternal
- * interface is unused
- */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs) {
- /*
- * if any set that we aren't ignoring; only
- * make the complaint once, in case it's stuck
- * or recurring, and we get here multiple
- * times.
- * force link down, so switch knows, and
- * LEDs are turned off
- */
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- ipath_setup_ht_setextled(dd,
- INFINIPATH_IBCS_L_STATE_DOWN,
- INFINIPATH_IBCS_LT_STATE_DISABLED);
- ipath_dev_err(dd, "Fatal Hardware Error (freeze "
- "mode), no longer usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- /*
- * mark as not usable, at a minimum until driver
- * is reloaded, probably until reboot, since no
- * other reset is possible.
- */
- dd->ipath_flags &= ~IPATH_INITTED;
- }
- else
- *msg = 0; /* recovered from all of them */
- if (*msg)
- ipath_dev_err(dd, "%s hardware error\n", msg);
- if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
- /*
- * for status file; if no trailing brace is copied,
- * we'll know it was truncated.
- */
- snprintf(dd->ipath_freezemsg,
- dd->ipath_freezelen, "{%s}", msg);
-
-bail:;
-}
-
-/**
- * ipath_ht_boardname - fill in the board name
- * @dd: the infinipath device
- * @name: the output buffer
- * @namelen: the size of the output buffer
- *
- * fill in the board name, based on the board revision register
- */
-static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
- size_t namelen)
-{
- char *n = NULL;
- u8 boardrev = dd->ipath_boardrev;
- int ret = 0;
-
- switch (boardrev) {
- case 5:
- /*
- * original production board; two production levels, with
- * different serial number ranges. See ipath_ht_early_init() for
- * case where we enable IPATH_GPIO_INTR for later serial # range.
- * Original 112* serial number is no longer supported.
- */
- n = "InfiniPath_QHT7040";
- break;
- case 7:
- /* small form factor production board */
- n = "InfiniPath_QHT7140";
- break;
- default: /* don't know, just print the number */
- ipath_dev_err(dd, "Don't yet know about board "
- "with ID %u\n", boardrev);
- snprintf(name, namelen, "Unknown_InfiniPath_QHT7xxx_%u",
- boardrev);
- break;
- }
- if (n)
- snprintf(name, namelen, "%s", n);
-
- if (ret) {
- ipath_dev_err(dd, "Unsupported InfiniPath board %s!\n", name);
- goto bail;
- }
- if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 ||
- dd->ipath_minrev > 4)) {
- /*
- * This version of the driver only supports Rev 3.2 - 3.4
- */
- ipath_dev_err(dd,
- "Unsupported InfiniPath hardware revision %u.%u!\n",
- dd->ipath_majrev, dd->ipath_minrev);
- ret = 1;
- goto bail;
- }
- /*
- * pkt/word counters are 32 bit, and therefore wrap fast enough
- * that we snapshot them from a timer, and maintain 64 bit shadow
- * copies
- */
- dd->ipath_flags |= IPATH_32BITCOUNTERS;
- dd->ipath_flags |= IPATH_GPIO_INTR;
- if (dd->ipath_lbus_speed != 800)
- ipath_dev_err(dd,
- "Incorrectly configured for HT @ %uMHz\n",
- dd->ipath_lbus_speed);
-
- /*
- * set here, not in ipath_init_*_funcs because we have to do
- * it after we can read chip registers.
- */
- dd->ipath_ureg_align =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
-
-bail:
- return ret;
-}
-
-static void ipath_check_htlink(struct ipath_devdata *dd)
-{
- u8 linkerr, link_off, i;
-
- for (i = 0; i < 2; i++) {
- link_off = dd->ipath_ht_slave_off + i * 4 + 0xd;
- if (pci_read_config_byte(dd->pcidev, link_off, &linkerr))
- dev_info(&dd->pcidev->dev, "Couldn't read "
- "linkerror%d of HT slave/primary block\n",
- i);
- else if (linkerr & 0xf0) {
- ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
- "clearing\n", linkerr >> 4, i);
- /*
- * writing the linkerr bits that are set should
- * clear them
- */
- if (pci_write_config_byte(dd->pcidev, link_off,
- linkerr))
- ipath_dbg("Failed write to clear HT "
- "linkerror%d\n", i);
- if (pci_read_config_byte(dd->pcidev, link_off,
- &linkerr))
- dev_info(&dd->pcidev->dev,
- "Couldn't reread linkerror%d of "
- "HT slave/primary block\n", i);
- else if (linkerr & 0xf0)
- dev_info(&dd->pcidev->dev,
- "HT linkerror%d bits 0x%x "
- "couldn't be cleared\n",
- i, linkerr >> 4);
- }
- }
-}
-
-static int ipath_setup_ht_reset(struct ipath_devdata *dd)
-{
- ipath_dbg("No reset possible for this InfiniPath hardware\n");
- return 0;
-}
-
-#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
-#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
-
-/*
- * Bits 13-15 of command==0 is slave/primary block. Clear any HT CRC
- * errors. We only bother to do this at load time, because it's OK if
- * it happened before we were loaded (first time after boot/reset),
- * but any time after that, it's fatal anyway. Also need to not check
- * for upper byte errors if we are in 8 bit mode, so figure out
- * our width. For now, at least, also complain if it's 8 bit.
- */
-static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
- int pos, u8 cap_type)
-{
- u8 linkwidth = 0, linkerr, link_a_b_off, link_off;
- u16 linkctrl = 0;
- int i;
-
- dd->ipath_ht_slave_off = pos;
- /* command word, master_host bit */
- /* master host || slave */
- if ((cap_type >> 2) & 1)
- link_a_b_off = 4;
- else
- link_a_b_off = 0;
- ipath_cdbg(VERBOSE, "HT%u (Link %c) connected to processor\n",
- link_a_b_off ? 1 : 0,
- link_a_b_off ? 'B' : 'A');
-
- link_a_b_off += pos;
-
- /*
- * check both link control registers; clear both HT CRC sets if
- * necessary.
- */
- for (i = 0; i < 2; i++) {
- link_off = pos + i * 4 + 0x4;
- if (pci_read_config_word(pdev, link_off, &linkctrl))
- ipath_dev_err(dd, "Couldn't read HT link control%d "
- "register\n", i);
- else if (linkctrl & (0xf << 8)) {
- ipath_cdbg(VERBOSE, "Clear linkctrl%d CRC Error "
- "bits %x\n", i, linkctrl & (0xf << 8));
- /*
- * now write them back to clear the error.
- */
- pci_write_config_word(pdev, link_off,
- linkctrl & (0xf << 8));
- }
- }
-
- /*
- * As with HT CRC bits, same for protocol errors that might occur
- * during boot.
- */
- for (i = 0; i < 2; i++) {
- link_off = pos + i * 4 + 0xd;
- if (pci_read_config_byte(pdev, link_off, &linkerr))
- dev_info(&pdev->dev, "Couldn't read linkerror%d "
- "of HT slave/primary block\n", i);
- else if (linkerr & 0xf0) {
- ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
- "clearing\n", linkerr >> 4, i);
- /*
- * writing the linkerr bits that are set will clear
- * them
- */
- if (pci_write_config_byte
- (pdev, link_off, linkerr))
- ipath_dbg("Failed write to clear HT "
- "linkerror%d\n", i);
- if (pci_read_config_byte(pdev, link_off, &linkerr))
- dev_info(&pdev->dev, "Couldn't reread "
- "linkerror%d of HT slave/primary "
- "block\n", i);
- else if (linkerr & 0xf0)
- dev_info(&pdev->dev, "HT linkerror%d bits "
- "0x%x couldn't be cleared\n",
- i, linkerr >> 4);
- }
- }
-
- /*
- * this is just for our link to the host, not devices connected
- * through tunnel.
- */
-
- if (pci_read_config_byte(pdev, link_a_b_off + 7, &linkwidth))
- ipath_dev_err(dd, "Couldn't read HT link width "
- "config register\n");
- else {
- u32 width;
- switch (linkwidth & 7) {
- case 5:
- width = 4;
- break;
- case 4:
- width = 2;
- break;
- case 3:
- width = 32;
- break;
- case 1:
- width = 16;
- break;
- case 0:
- default: /* if wrong, assume 8 bit */
- width = 8;
- break;
- }
-
- dd->ipath_lbus_width = width;
-
- if (linkwidth != 0x11) {
- ipath_dev_err(dd, "Not configured for 16 bit HT "
- "(%x)\n", linkwidth);
- if (!(linkwidth & 0xf)) {
- ipath_dbg("Will ignore HT lane1 errors\n");
- dd->ipath_flags |= IPATH_8BIT_IN_HT0;
- }
- }
- }
-
- /*
- * this is just for our link to the host, not devices connected
- * through tunnel.
- */
- if (pci_read_config_byte(pdev, link_a_b_off + 0xd, &linkwidth))
- ipath_dev_err(dd, "Couldn't read HT link frequency "
- "config register\n");
- else {
- u32 speed;
- switch (linkwidth & 0xf) {
- case 6:
- speed = 1000;
- break;
- case 5:
- speed = 800;
- break;
- case 4:
- speed = 600;
- break;
- case 3:
- speed = 500;
- break;
- case 2:
- speed = 400;
- break;
- case 1:
- speed = 300;
- break;
- default:
- /*
- * assume reserved and vendor-specific are 200...
- */
- case 0:
- speed = 200;
- break;
- }
- dd->ipath_lbus_speed = speed;
- }
-
- snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
- "HyperTransport,%uMHz,x%u\n",
- dd->ipath_lbus_speed,
- dd->ipath_lbus_width);
-}
-
-static int ipath_ht_intconfig(struct ipath_devdata *dd)
-{
- int ret;
-
- if (dd->ipath_intconfig) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
- dd->ipath_intconfig); /* interrupt address */
- ret = 0;
- } else {
- ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
- "interrupt address\n");
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
- struct ht_irq_msg *msg)
-{
- struct ipath_devdata *dd = pci_get_drvdata(dev);
- u64 prev_intconfig = dd->ipath_intconfig;
-
- dd->ipath_intconfig = msg->address_lo;
- dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
-
- /*
- * If the previous value of dd->ipath_intconfig is zero, we're
- * getting configured for the first time, and must not program the
- * intconfig register here (it will be programmed later, when the
- * hardware is ready). Otherwise, we should.
- */
- if (prev_intconfig)
- ipath_ht_intconfig(dd);
-}
-
-/**
- * ipath_setup_ht_config - setup the interruptconfig register
- * @dd: the infinipath device
- * @pdev: the PCI device
- *
- * setup the interruptconfig register from the HT config info.
- * Also clear CRC errors in HT linkcontrol, if necessary.
- * This is done only for the real hardware. It is done before
- * chip address space is initted, so can't touch infinipath registers
- */
-static int ipath_setup_ht_config(struct ipath_devdata *dd,
- struct pci_dev *pdev)
-{
- int pos, ret;
-
- ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
- if (ret < 0) {
- ipath_dev_err(dd, "Couldn't create interrupt handler: "
- "err %d\n", ret);
- goto bail;
- }
- dd->ipath_irq = ret;
- ret = 0;
-
- /*
- * Handle clearing CRC errors in linkctrl register if necessary. We
- * do this early, before we ever enable errors or hardware errors,
- * mostly to avoid causing the chip to enter freeze mode.
- */
- pos = pci_find_capability(pdev, PCI_CAP_ID_HT);
- if (!pos) {
- ipath_dev_err(dd, "Couldn't find HyperTransport "
- "capability; no interrupts\n");
- ret = -ENODEV;
- goto bail;
- }
- do {
- u8 cap_type;
-
- /*
- * The HT capability type byte is 3 bytes after the
- * capability byte.
- */
- if (pci_read_config_byte(pdev, pos + 3, &cap_type)) {
- dev_info(&pdev->dev, "Couldn't read config "
- "command @ %d\n", pos);
- continue;
- }
- if (!(cap_type & 0xE0))
- slave_or_pri_blk(dd, pdev, pos, cap_type);
- } while ((pos = pci_find_next_capability(pdev, pos,
- PCI_CAP_ID_HT)));
-
- dd->ipath_flags |= IPATH_SWAP_PIOBUFS;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_setup_ht_cleanup - clean up any per-chip chip-specific stuff
- * @dd: the infinipath device
- *
- * Called during driver unload.
- * This is currently a nop for the HT chip, not for all chips
- */
-static void ipath_setup_ht_cleanup(struct ipath_devdata *dd)
-{
-}
-
-/**
- * ipath_setup_ht_setextled - set the state of the two external LEDs
- * @dd: the infinipath device
- * @lst: the L state
- * @ltst: the LT state
- *
- * Set the state of the two external LEDs, to indicate physical and
- * logical state of IB link. For this chip (at least with recommended
- * board pinouts), LED1 is Green (physical state), and LED2 is Yellow
- * (logical state)
- *
- * Note: We try to match the Mellanox HCA LED behavior as best
- * we can. Green indicates physical link state is OK (something is
- * plugged in, and we can train).
- * Amber indicates the link is logically up (ACTIVE).
- * Mellanox further blinks the amber LED to indicate data packet
- * activity, but we have no hardware support for that, so it would
- * require waking up every 10-20 msecs and checking the counters
- * on the chip, and then turning the LED off if appropriate. That's
- * visible overhead, so not something we will do.
- *
- */
-static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
- u64 lst, u64 ltst)
-{
- u64 extctl;
- unsigned long flags = 0;
-
- /* the diags use the LED to indicate diag info, so we leave
- * the external LED alone when the diags are running */
- if (ipath_diag_inuse)
- return;
-
- /* Allow override of LED display for, e.g. Locating system in rack */
- if (dd->ipath_led_override) {
- ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
- ? INFINIPATH_IBCS_LT_STATE_LINKUP
- : INFINIPATH_IBCS_LT_STATE_DISABLED;
- lst = (dd->ipath_led_override & IPATH_LED_LOG)
- ? INFINIPATH_IBCS_L_STATE_ACTIVE
- : INFINIPATH_IBCS_L_STATE_DOWN;
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- /*
- * start by setting both LED control bits to off, then turn
- * on the appropriate bit(s).
- */
- if (dd->ipath_boardrev == 8) { /* LS/X-1 uses different pins */
- /*
- * major difference is that INFINIPATH_EXTC_LEDGBLERR_OFF
- * is inverted, because it is normally used to indicate
- * a hardware fault at reset, if there were errors
- */
- extctl = (dd->ipath_extctrl & ~INFINIPATH_EXTC_LEDGBLOK_ON)
- | INFINIPATH_EXTC_LEDGBLERR_OFF;
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
- extctl &= ~INFINIPATH_EXTC_LEDGBLERR_OFF;
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LEDGBLOK_ON;
- }
- else {
- extctl = dd->ipath_extctrl &
- ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
- INFINIPATH_EXTC_LED2PRIPORT_ON);
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
- extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
- }
- dd->ipath_extctrl = extctl;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-}
-
-static void ipath_init_ht_variables(struct ipath_devdata *dd)
-{
- /*
- * setup the register offsets, since they are different for each
- * chip
- */
- dd->ipath_kregs = &ipath_ht_kregs;
- dd->ipath_cregs = &ipath_ht_cregs;
-
- dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
- dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
- dd->ipath_gpio_sda = IPATH_GPIO_SDA;
- dd->ipath_gpio_scl = IPATH_GPIO_SCL;
-
- /*
- * Fill in data for field-values that change in newer chips.
- * We dynamically specify only the mask for LINKTRAININGSTATE
- * and only the shift for LINKSTATE, as they are the only ones
- * that change. Also precalculate the 3 link states of interest
- * and the combined mask.
- */
- dd->ibcs_ls_shift = IBA6110_IBCS_LINKSTATE_SHIFT;
- dd->ibcs_lts_mask = IBA6110_IBCS_LINKTRAININGSTATE_MASK;
- dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
- dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
- dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
- dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
- dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
-
- /*
- * Fill in data for ibcc field-values that change in newer chips.
- * We dynamically specify only the mask for LINKINITCMD
- * and only the shift for LINKCMD and MAXPKTLEN, as they are
- * the only ones that change.
- */
- dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
- dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
- dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
-
- /* Fill in shifts for RcvCtrl. */
- dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
- dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
- dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT;
- dd->ipath_r_portcfg_shift = 0; /* Not on IBA6110 */
-
- dd->ipath_i_bitsextant =
- (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
- (INFINIPATH_I_RCVAVAIL_MASK <<
- INFINIPATH_I_RCVAVAIL_SHIFT) |
- INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
- INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
-
- dd->ipath_e_bitsextant =
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
- INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
- INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
- INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
- INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
- INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
- INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
- INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
- INFINIPATH_E_HARDWARE;
-
- dd->ipath_hwe_bitsextant =
- (INFINIPATH_HWE_HTCMEMPARITYERR_MASK <<
- INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
- INFINIPATH_HWE_HTCLNKABYTE0CRCERR |
- INFINIPATH_HWE_HTCLNKABYTE1CRCERR |
- INFINIPATH_HWE_HTCLNKBBYTE0CRCERR |
- INFINIPATH_HWE_HTCLNKBBYTE1CRCERR |
- INFINIPATH_HWE_HTCMISCERR4 |
- INFINIPATH_HWE_HTCMISCERR5 | INFINIPATH_HWE_HTCMISCERR6 |
- INFINIPATH_HWE_HTCMISCERR7 |
- INFINIPATH_HWE_HTCBUSTREQPARITYERR |
- INFINIPATH_HWE_HTCBUSTRESPPARITYERR |
- INFINIPATH_HWE_HTCBUSIREQPARITYERR |
- INFINIPATH_HWE_RXDSYNCMEMPARITYERR |
- INFINIPATH_HWE_MEMBISTFAILED |
- INFINIPATH_HWE_COREPLL_FBSLIP |
- INFINIPATH_HWE_COREPLL_RFSLIP |
- INFINIPATH_HWE_HTBPLL_FBSLIP |
- INFINIPATH_HWE_HTBPLL_RFSLIP |
- INFINIPATH_HWE_HTAPLL_FBSLIP |
- INFINIPATH_HWE_HTAPLL_RFSLIP |
- INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
- INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
-
- dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
- dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
- dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
- dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
-
- /*
- * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
- * 2 is Some Misc, 3 is reserved for future.
- */
- dd->ipath_eep_st_masks[0].hwerrs_to_log =
- INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[1].hwerrs_to_log =
- INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
-
- dd->delay_mult = 2; /* SDR, 4X, can't change */
-
- dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
- dd->ipath_link_speed_supported = IPATH_IB_SDR;
- dd->ipath_link_width_enabled = IB_WIDTH_4X;
- dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
- /* these can't change for this chip, so set once */
- dd->ipath_link_width_active = dd->ipath_link_width_enabled;
- dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
-}
-
-/**
- * ipath_ht_init_hwerrors - enable hardware errors
- * @dd: the infinipath device
- *
- * now that we have finished initializing everything that might reasonably
- * cause a hardware error, and cleared those errors bits as they occur,
- * we can enable hardware errors in the mask (potentially enabling
- * freeze mode), and enable hardware errors as errors (along with
- * everything else) in errormask
- */
-static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
-{
- ipath_err_t val;
- u64 extsval;
-
- extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-
- if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
- ipath_dev_err(dd, "MemBIST did not complete!\n");
- if (extsval & INFINIPATH_EXTS_MEMBIST_CORRECT)
- ipath_dbg("MemBIST corrected\n");
-
- ipath_check_htlink(dd);
-
- /* barring bugs, all hwerrors become interrupts, which can */
- val = -1LL;
- /* don't look at crc lane1 if 8 bit */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
- val &= ~infinipath_hwe_htclnkabyte1crcerr;
- /* don't look at crc lane1 if 8 bit */
- if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
- val &= ~infinipath_hwe_htclnkbbyte1crcerr;
-
- /*
- * disable RXDSYNCMEMPARITY because external serdes is unused,
- * and therefore the logic will never be used or initialized,
- * and uninitialized state will normally result in this error
- * being asserted. Similarly for the external serdess pll
- * lock signal.
- */
- val &= ~(INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_RXDSYNCMEMPARITYERR);
-
- /*
- * Disable MISCERR4 because of an inversion in the HT core
- * logic checking for errors that cause this bit to be set.
- * The errata can also cause the protocol error bit to be set
- * in the HT config space linkerror register(s).
- */
- val &= ~INFINIPATH_HWE_HTCMISCERR4;
-
- /*
- * PLL ignored because unused MDIO interface has a logic problem
- */
- if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
- val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- dd->ipath_hwerrmask = val;
-}
-
-
-
-
-/**
- * ipath_ht_bringup_serdes - bring up the serdes
- * @dd: the infinipath device
- */
-static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
-{
- u64 val, config1;
- int ret = 0, change = 0;
-
- ipath_dbg("Trying to bringup serdes\n");
-
- if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
- INFINIPATH_HWE_SERDESPLLFAILED)
- {
- ipath_dbg("At start, serdes PLL failed bit set in "
- "hwerrstatus, clearing and continuing\n");
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- INFINIPATH_HWE_SERDESPLLFAILED);
- }
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
- config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
-
- ipath_cdbg(VERBOSE, "Initial serdes status is config0=%llx "
- "config1=%llx, sstatus=%llx xgxs %llx\n",
- (unsigned long long) val, (unsigned long long) config1,
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- /* force reset on */
- val |= INFINIPATH_SERDC0_RESET_PLL
- /* | INFINIPATH_SERDC0_RESET_MASK */
- ;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
- udelay(15); /* need pll reset set at least for a bit */
-
- if (val & INFINIPATH_SERDC0_RESET_PLL) {
- u64 val2 = val &= ~INFINIPATH_SERDC0_RESET_PLL;
- /* set lane resets, and tx idle, during pll reset */
- val2 |= INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE;
- ipath_cdbg(VERBOSE, "Clearing serdes PLL reset (writing "
- "%llx)\n", (unsigned long long) val2);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
- val2);
- /*
- * be sure chip saw it
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- /*
- * need pll reset clear at least 11 usec before lane
- * resets cleared; give it a few more
- */
- udelay(15);
- val = val2; /* for check below */
- }
-
- if (val & (INFINIPATH_SERDC0_RESET_PLL |
- INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE)) {
- val &= ~(INFINIPATH_SERDC0_RESET_PLL |
- INFINIPATH_SERDC0_RESET_MASK |
- INFINIPATH_SERDC0_TXIDLE);
- /* clear them */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
- val);
- }
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- if (val & INFINIPATH_XGXS_RESET) {
- /* normally true after boot */
- val &= ~INFINIPATH_XGXS_RESET;
- change = 1;
- }
- if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
- INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
- /* need to compensate for Tx inversion in partner */
- val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
- INFINIPATH_XGXS_RX_POL_SHIFT);
- val |= dd->ipath_rx_pol_inv <<
- INFINIPATH_XGXS_RX_POL_SHIFT;
- change = 1;
- }
- if (change)
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- /* clear current and de-emphasis bits */
- config1 &= ~0x0ffffffff00ULL;
- /* set current to 20ma */
- config1 |= 0x00000000000ULL;
- /* set de-emphasis to -5.68dB */
- config1 |= 0x0cccc000000ULL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
-
- ipath_cdbg(VERBOSE, "After setup: serdes status is config0=%llx "
- "config1=%llx, sstatus=%llx xgxs %llx\n",
- (unsigned long long) val, (unsigned long long) config1,
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- return ret; /* for now, say we always succeeded */
-}
-
-/**
- * ipath_ht_quiet_serdes - set serdes to txidle
- * @dd: the infinipath device
- * driver is being unloaded
- */
-static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
-{
- u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- val |= INFINIPATH_SERDC0_TXIDLE;
- ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
- (unsigned long long) val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
-}
-
-/**
- * ipath_pe_put_tid - write a TID in chip
- * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to update
- * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
- * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
- *
- * This exists as a separate routine to allow for special locking etc.
- * It's used for both the full cleanup on exit, as well as the normal
- * setup and teardown.
- */
-static void ipath_ht_put_tid(struct ipath_devdata *dd,
- u64 __iomem *tidptr, u32 type,
- unsigned long pa)
-{
- if (!dd->ipath_kregbase)
- return;
-
- if (pa != dd->ipath_tidinvalid) {
- if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
- dev_info(&dd->pcidev->dev,
- "physaddr %lx has more than "
- "40 bits, using only 40!!!\n", pa);
- pa &= INFINIPATH_RT_ADDR_MASK;
- }
- if (type == RCVHQ_RCV_TYPE_EAGER)
- pa |= dd->ipath_tidtemplate;
- else {
- /* in words (fixed, full page). */
- u64 lenvalid = PAGE_SIZE >> 2;
- lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
- pa |= lenvalid | INFINIPATH_RT_VALID;
- }
- }
-
- writeq(pa, tidptr);
-}
-
-
-/**
- * ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
- * @dd: the infinipath device
- * @port: the port
- *
- * Used from ipath_close(), and at chip initialization.
- */
-static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
-{
- u64 __iomem *tidbase;
- int i;
-
- if (!dd->ipath_kregbase)
- return;
-
- ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
-
- /*
- * need to invalidate all of the expected TID entries for this
- * port, so we don't have valid entries that might somehow get
- * used (early in next use of this port, or through some bug)
- */
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- port * dd->ipath_rcvtidcnt *
- sizeof(*tidbase));
- for (i = 0; i < dd->ipath_rcvtidcnt; i++)
- ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
- dd->ipath_tidinvalid);
-
- tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvegrbase +
- port * dd->ipath_rcvegrcnt *
- sizeof(*tidbase));
-
- for (i = 0; i < dd->ipath_rcvegrcnt; i++)
- ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
- dd->ipath_tidinvalid);
-}
-
-/**
- * ipath_ht_tidtemplate - setup constants for TID updates
- * @dd: the infinipath device
- *
- * We setup stuff that we use a lot, to avoid calculating each time
- */
-static void ipath_ht_tidtemplate(struct ipath_devdata *dd)
-{
- dd->ipath_tidtemplate = dd->ipath_ibmaxlen >> 2;
- dd->ipath_tidtemplate <<= INFINIPATH_RT_BUFSIZE_SHIFT;
- dd->ipath_tidtemplate |= INFINIPATH_RT_VALID;
-
- /*
- * work around chip errata bug 7358, by marking invalid tids
- * as having max length
- */
- dd->ipath_tidinvalid = (-1LL & INFINIPATH_RT_BUFSIZE_MASK) <<
- INFINIPATH_RT_BUFSIZE_SHIFT;
-}
-
-static int ipath_ht_early_init(struct ipath_devdata *dd)
-{
- u32 __iomem *piobuf;
- u32 pioincr, val32;
- int i;
-
- /*
- * one cache line; long IB headers will spill over into received
- * buffer
- */
- dd->ipath_rcvhdrentsize = 16;
- dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
-
- /*
- * For HT, we allocate a somewhat overly large eager buffer,
- * such that we can guarantee that we can receive the largest
- * packet that we can send out. To truly support a 4KB MTU,
- * we need to bump this to a large value. To date, other than
- * testing, we have never encountered an HCA that can really
- * send 4KB MTU packets, so we do not handle that (we'll get
- * errors interrupts if we ever see one).
- */
- dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
-
- /*
- * the min() check here is currently a nop, but it may not
- * always be, depending on just how we do ipath_rcvegrbufsize
- */
- dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
- dd->ipath_rcvegrbufsize);
- dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
- ipath_ht_tidtemplate(dd);
-
- /*
- * zero all the TID entries at startup. We do this for sanity,
- * in case of a previous driver crash of some kind, and also
- * because the chip powers up with these memories in an unknown
- * state. Use portcnt, not cfgports, since this is for the
- * full chip, not for current (possibly different) configuration
- * value.
- * Chip Errata bug 6447
- */
- for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
- ipath_ht_clear_tids(dd, val32);
-
- /*
- * write the pbc of each buffer, to be sure it's initialized, then
- * cancel all the buffers, and also abort any packets that might
- * have been in flight for some reason (the latter is for driver
- * unload/reload, but isn't a bad idea at first init). PIO send
- * isn't enabled at this point, so there is no danger of sending
- * these out on the wire.
- * Chip Errata bug 6610
- */
- piobuf = (u32 __iomem *) (((char __iomem *)(dd->ipath_kregbase)) +
- dd->ipath_piobufbase);
- pioincr = dd->ipath_palign / sizeof(*piobuf);
- for (i = 0; i < dd->ipath_piobcnt2k; i++) {
- /*
- * reasonable word count, just to init pbc
- */
- writel(16, piobuf);
- piobuf += pioincr;
- }
-
- ipath_get_eeprom_info(dd);
- if (dd->ipath_boardrev == 5) {
- /*
- * Later production QHT7040 has same changes as QHT7140, so
- * can use GPIO interrupts. They have serial #'s starting
- * with 128, rather than 112.
- */
- if (dd->ipath_serial[0] == '1' &&
- dd->ipath_serial[1] == '2' &&
- dd->ipath_serial[2] == '8')
- dd->ipath_flags |= IPATH_GPIO_INTR;
- else {
- ipath_dev_err(dd, "Unsupported InfiniPath board "
- "(serial number %.16s)!\n",
- dd->ipath_serial);
- return 1;
- }
- }
-
- if (dd->ipath_minrev >= 4) {
- /* Rev4+ reports extra errors via internal GPIO pins */
- dd->ipath_flags |= IPATH_GPIO_ERRINTRS;
- dd->ipath_gpio_mask |= IPATH_GPIO_ERRINTR_MASK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
-
- return 0;
-}
-
-
-/**
- * ipath_init_ht_get_base_info - set chip-specific flags for user code
- * @dd: the infinipath device
- * @kbase: ipath_base_info pointer
- *
- * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithms.
- */
-static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
-{
- struct ipath_base_info *kinfo = kbase;
-
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_HT |
- IPATH_RUNTIME_PIO_REGSWAPPED;
-
- if (pd->port_dd->ipath_minrev < 4)
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_RCVHDR_COPY;
-
- return 0;
-}
-
-static void ipath_ht_free_irq(struct ipath_devdata *dd)
-{
- free_irq(dd->ipath_irq, dd);
- ht_destroy_irq(dd->ipath_irq);
- dd->ipath_irq = 0;
- dd->ipath_intconfig = 0;
-}
-
-static struct ipath_message_header *
-ipath_ht_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
-{
- return (struct ipath_message_header *)
- &rhf_addr[sizeof(u64) / sizeof(u32)];
-}
-
-static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports)
-{
- dd->ipath_portcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
- dd->ipath_p0_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
-}
-
-static void ipath_ht_read_counters(struct ipath_devdata *dd,
- struct infinipath_counters *cntrs)
-{
- cntrs->LBIntCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt));
- cntrs->LBFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt));
- cntrs->TxSDmaDescCnt = 0;
- cntrs->TxUnsupVLErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt));
- cntrs->TxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt));
- cntrs->TxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt));
- cntrs->TxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt));
- cntrs->TxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt));
- cntrs->TxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt));
- cntrs->TxUnderrunCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt));
- cntrs->TxFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt));
- cntrs->TxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt));
- cntrs->RxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt));
- cntrs->RxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt));
- cntrs->RxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt));
- cntrs->RxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt));
- cntrs->RxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt));
- cntrs->RxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt));
- cntrs->RxICRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt));
- cntrs->RxVCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt));
- cntrs->RxFlowCtrlErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt));
- cntrs->RxBadFormatCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt));
- cntrs->RxLinkProblemCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt));
- cntrs->RxEBPCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt));
- cntrs->RxLPCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt));
- cntrs->RxBufOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt));
- cntrs->RxTIDFullErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt));
- cntrs->RxTIDValidErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt));
- cntrs->RxPKeyMismatchCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt));
- cntrs->RxP0HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt));
- cntrs->RxP1HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt));
- cntrs->RxP2HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt));
- cntrs->RxP3HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt));
- cntrs->RxP4HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt));
- cntrs->RxP5HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP5HdrEgrOvflCnt));
- cntrs->RxP6HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP6HdrEgrOvflCnt));
- cntrs->RxP7HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP7HdrEgrOvflCnt));
- cntrs->RxP8HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP8HdrEgrOvflCnt));
- cntrs->RxP9HdrEgrOvflCnt = 0;
- cntrs->RxP10HdrEgrOvflCnt = 0;
- cntrs->RxP11HdrEgrOvflCnt = 0;
- cntrs->RxP12HdrEgrOvflCnt = 0;
- cntrs->RxP13HdrEgrOvflCnt = 0;
- cntrs->RxP14HdrEgrOvflCnt = 0;
- cntrs->RxP15HdrEgrOvflCnt = 0;
- cntrs->RxP16HdrEgrOvflCnt = 0;
- cntrs->IBStatusChangeCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt));
- cntrs->IBLinkErrRecoveryCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt));
- cntrs->IBLinkDownedCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt));
- cntrs->IBSymbolErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt));
- cntrs->RxVL15DroppedPktCnt = 0;
- cntrs->RxOtherLocalPhyErrCnt = 0;
- cntrs->PcieRetryBufDiagQwordCnt = 0;
- cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs;
- cntrs->LocalLinkIntegrityErrCnt =
- (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
- dd->ipath_lli_errs : dd->ipath_lli_errors;
- cntrs->RxVlErrCnt = 0;
- cntrs->RxDlidFltrCnt = 0;
-}
-
-
-/* no interrupt fallback for these chips */
-static int ipath_ht_nointr_fallback(struct ipath_devdata *dd)
-{
- return 0;
-}
-
-
-/*
- * reset the XGXS (between serdes and IBC). Slightly less intrusive
- * than resetting the IBC or external link state, and useful in some
- * cases to cause some retraining. To do this right, we reset IBC
- * as well.
- */
-static void ipath_ht_xgxs_reset(struct ipath_devdata *dd)
-{
- u64 val, prev_val;
-
- prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val = prev_val | INFINIPATH_XGXS_RESET;
- prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-}
-
-
-static int ipath_ht_get_ib_cfg(struct ipath_devdata *dd, int which)
-{
- int ret;
-
- switch (which) {
- case IPATH_IB_CFG_LWID:
- ret = dd->ipath_link_width_active;
- break;
- case IPATH_IB_CFG_SPD:
- ret = dd->ipath_link_speed_active;
- break;
- case IPATH_IB_CFG_LWID_ENB:
- ret = dd->ipath_link_width_enabled;
- break;
- case IPATH_IB_CFG_SPD_ENB:
- ret = dd->ipath_link_speed_enabled;
- break;
- default:
- ret = -ENOTSUPP;
- break;
- }
- return ret;
-}
-
-
-/* we assume range checking is already done, if needed */
-static int ipath_ht_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
-{
- int ret = 0;
-
- if (which == IPATH_IB_CFG_LWID_ENB)
- dd->ipath_link_width_enabled = val;
- else if (which == IPATH_IB_CFG_SPD_ENB)
- dd->ipath_link_speed_enabled = val;
- else
- ret = -ENOTSUPP;
- return ret;
-}
-
-
-static void ipath_ht_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
-{
-}
-
-
-static int ipath_ht_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
-{
- ipath_setup_ht_setextled(dd, ipath_ib_linkstate(dd, ibcs),
- ipath_ib_linktrstate(dd, ibcs));
- return 0;
-}
-
-
-/**
- * ipath_init_iba6110_funcs - set up the chip-specific function pointers
- * @dd: the infinipath device
- *
- * This is global, and is called directly at init to set up the
- * chip-specific function pointers for later use.
- */
-void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
-{
- dd->ipath_f_intrsetup = ipath_ht_intconfig;
- dd->ipath_f_bus = ipath_setup_ht_config;
- dd->ipath_f_reset = ipath_setup_ht_reset;
- dd->ipath_f_get_boardname = ipath_ht_boardname;
- dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
- dd->ipath_f_early_init = ipath_ht_early_init;
- dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
- dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
- dd->ipath_f_bringup_serdes = ipath_ht_bringup_serdes;
- dd->ipath_f_clear_tids = ipath_ht_clear_tids;
- dd->ipath_f_put_tid = ipath_ht_put_tid;
- dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
- dd->ipath_f_setextled = ipath_setup_ht_setextled;
- dd->ipath_f_get_base_info = ipath_ht_get_base_info;
- dd->ipath_f_free_irq = ipath_ht_free_irq;
- dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
- dd->ipath_f_intr_fallback = ipath_ht_nointr_fallback;
- dd->ipath_f_get_msgheader = ipath_ht_get_msgheader;
- dd->ipath_f_config_ports = ipath_ht_config_ports;
- dd->ipath_f_read_counters = ipath_ht_read_counters;
- dd->ipath_f_xgxs_reset = ipath_ht_xgxs_reset;
- dd->ipath_f_get_ib_cfg = ipath_ht_get_ib_cfg;
- dd->ipath_f_set_ib_cfg = ipath_ht_set_ib_cfg;
- dd->ipath_f_config_jint = ipath_ht_config_jint;
- dd->ipath_f_ib_updown = ipath_ht_ib_updown;
-
- /*
- * initialize chip-specific variables
- */
- ipath_init_ht_variables(dd);
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_kernel.h"
-#include "ipath_common.h"
-
-/*
- * min buffers we want to have per port, after driver
- */
-#define IPATH_MIN_USER_PORT_BUFCNT 7
-
-/*
- * Number of ports we are configured to use (to allow for more pio
- * buffers per port, etc.) Zero means use chip value.
- */
-static ushort ipath_cfgports;
-
-module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
-MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
-
-/*
- * Number of buffers reserved for driver (verbs and layered drivers.)
- * Initialized based on number of PIO buffers if not set via module interface.
- * The problem with this is that it's global, but we'll use different
- * numbers for different chip types.
- */
-static ushort ipath_kpiobufs;
-
-static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
-
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
- &ipath_kpiobufs, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
-
-/**
- * create_port0_egr - allocate the eager TID buffers
- * @dd: the infinipath device
- *
- * This code is now quite different for user and kernel, because
- * the kernel uses skb's, for the accelerated network performance.
- * This is the kernel (port0) version.
- *
- * Allocate the eager TID buffers and program them into infinipath.
- * We use the network layer alloc_skb() allocator to allocate the
- * memory, and either use the buffers as is for things like verbs
- * packets, or pass the buffers up to the ipath layered driver and
- * thence the network layer, replacing them as we do so (see
- * ipath_rcv_layer()).
- */
-static int create_port0_egr(struct ipath_devdata *dd)
-{
- unsigned e, egrcnt;
- struct ipath_skbinfo *skbinfo;
- int ret;
-
- egrcnt = dd->ipath_p0_rcvegrcnt;
-
- skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
- if (skbinfo == NULL) {
- ipath_dev_err(dd, "allocation error for eager TID "
- "skb array\n");
- ret = -ENOMEM;
- goto bail;
- }
- for (e = 0; e < egrcnt; e++) {
- /*
- * This is a bit tricky in that we allocate extra
- * space for 2 bytes of the 14 byte ethernet header.
- * These two bytes are passed in the ipath header so
- * the rest of the data is word aligned. We allocate
- * 4 bytes so that the data buffer stays word aligned.
- * See ipath_kreceive() for more details.
- */
- skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
- if (!skbinfo[e].skb) {
- ipath_dev_err(dd, "SKB allocation error for "
- "eager TID %u\n", e);
- while (e != 0)
- dev_kfree_skb(skbinfo[--e].skb);
- vfree(skbinfo);
- ret = -ENOMEM;
- goto bail;
- }
- }
- /*
- * After loop above, so we can test non-NULL to see if ready
- * to use at receive, etc.
- */
- dd->ipath_port0_skbinfo = skbinfo;
-
- for (e = 0; e < egrcnt; e++) {
- dd->ipath_port0_skbinfo[e].phys =
- ipath_map_single(dd->pcidev,
- dd->ipath_port0_skbinfo[e].skb->data,
- dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
- dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
- ((char __iomem *) dd->ipath_kregbase +
- dd->ipath_rcvegrbase),
- RCVHQ_RCV_TYPE_EAGER,
- dd->ipath_port0_skbinfo[e].phys);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int bringup_link(struct ipath_devdata *dd)
-{
- u64 val, ibc;
- int ret = 0;
-
- /* hold IBC in reset */
- dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-
- /*
- * set initial max size pkt IBC will send, including ICRC; it's the
- * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
- */
- val = (dd->ipath_ibmaxlen >> 2) + 1;
- ibc = val << dd->ibcc_mpl_shift;
-
- /* flowcontrolwatermark is in units of KBytes */
- ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
- /*
- * How often flowctrl sent. More or less in usecs; balance against
- * watermark value, so that in theory senders always get a flow
- * control update in time to not let the IB link go idle.
- */
- ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
- /* max error tolerance */
- ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
- /* use "real" buffer space for */
- ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
- /* IB credit flow control. */
- ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
- /* initially come up waiting for TS1, without sending anything. */
- dd->ipath_ibcctrl = ibc;
- /*
- * Want to start out with both LINKCMD and LINKINITCMD in NOP
- * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
- * to stay a NOP. Flag that we are disabled, for the (unlikely)
- * case that some recovery path is trying to bring the link up
- * before we are ready.
- */
- ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT;
- dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
- ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
- (unsigned long long) ibc);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
-
- // be sure chip saw it
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- ret = dd->ipath_f_bringup_serdes(dd);
-
- if (ret)
- dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
- "not usable\n");
- else {
- /* enable IBC */
- dd->ipath_control |= INFINIPATH_C_LINKENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
- }
-
- return ret;
-}
-
-static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd = NULL;
-
- pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (pd) {
- pd->port_dd = dd;
- pd->port_cnt = 1;
- /* The port 0 pkey table is used by the layer interface. */
- pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
- pd->port_seq_cnt = 1;
- }
- return pd;
-}
-
-static int init_chip_first(struct ipath_devdata *dd)
-{
- struct ipath_portdata *pd;
- int ret = 0;
- u64 val;
-
- spin_lock_init(&dd->ipath_kernel_tid_lock);
- spin_lock_init(&dd->ipath_user_tid_lock);
- spin_lock_init(&dd->ipath_sendctrl_lock);
- spin_lock_init(&dd->ipath_uctxt_lock);
- spin_lock_init(&dd->ipath_sdma_lock);
- spin_lock_init(&dd->ipath_gpio_lock);
- spin_lock_init(&dd->ipath_eep_st_lock);
- spin_lock_init(&dd->ipath_sdepb_lock);
- mutex_init(&dd->ipath_eep_lock);
-
- /*
- * skip cfgports stuff because we are not allocating memory,
- * and we don't want problems if the portcnt changed due to
- * cfgports. We do still check and report a difference, if
- * not same (should be impossible).
- */
- dd->ipath_f_config_ports(dd, ipath_cfgports);
- if (!ipath_cfgports)
- dd->ipath_cfgports = dd->ipath_portcnt;
- else if (ipath_cfgports <= dd->ipath_portcnt) {
- dd->ipath_cfgports = ipath_cfgports;
- ipath_dbg("Configured to use %u ports out of %u in chip\n",
- dd->ipath_cfgports, ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- } else {
- dd->ipath_cfgports = dd->ipath_portcnt;
- ipath_dbg("Tried to configured to use %u ports; chip "
- "only supports %u\n", ipath_cfgports,
- ipath_read_kreg32(dd,
- dd->ipath_kregs->kr_portcnt));
- }
- /*
- * Allocate full portcnt array, rather than just cfgports, because
- * cleanup iterates across all possible ports.
- */
- dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
- GFP_KERNEL);
-
- if (!dd->ipath_pd) {
- ipath_dev_err(dd, "Unable to allocate portdata array, "
- "failing\n");
- ret = -ENOMEM;
- goto done;
- }
-
- pd = create_portdata0(dd);
- if (!pd) {
- ipath_dev_err(dd, "Unable to allocate portdata for port "
- "0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- dd->ipath_pd[0] = pd;
-
- dd->ipath_rcvtidcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- dd->ipath_rcvtidbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- dd->ipath_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- dd->ipath_rcvegrbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- dd->ipath_palign =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
- dd->ipath_piobufbase =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
- dd->ipath_piosize2k = val & ~0U;
- dd->ipath_piosize4k = val >> 32;
- if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
- ipath_mtu4096 = 0; /* 4KB not supported by this chip */
- dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
- dd->ipath_piobcnt2k = val & ~0U;
- dd->ipath_piobcnt4k = val >> 32;
- dd->ipath_pio2kbase =
- (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase & 0xffffffff));
- if (dd->ipath_piobcnt4k) {
- dd->ipath_pio4kbase = (u32 __iomem *)
- (((char __iomem *) dd->ipath_kregbase) +
- (dd->ipath_piobufbase >> 32));
- /*
- * 4K buffers take 2 pages; we use roundup just to be
- * paranoid; we calculate it once here, rather than on
- * ever buf allocate
- */
- dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
- dd->ipath_palign);
- ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
- "(%x aligned)\n",
- dd->ipath_piobcnt2k, dd->ipath_piosize2k,
- dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
- dd->ipath_piosize4k, dd->ipath_pio4kbase,
- dd->ipath_4kalign);
- }
- else ipath_dbg("%u 2k piobufs @ %p\n",
- dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
-
-done:
- return ret;
-}
-
-/**
- * init_chip_reset - re-initialize after a reset, or enable
- * @dd: the infinipath device
- *
- * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explicitly, in case reset
- * failed
- */
-static int init_chip_reset(struct ipath_devdata *dd)
-{
- u32 rtmp;
- int i;
- unsigned long flags;
-
- /*
- * ensure chip does no sends or receives, tail updates, or
- * pioavail updates while we re-initialize
- */
- dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
- for (i = 0; i < dd->ipath_portcnt; i++) {
- clear_bit(dd->ipath_r_portenable_shift + i,
- &dd->ipath_rcvctrl);
- clear_bit(dd->ipath_r_intravail_shift + i,
- &dd->ipath_rcvctrl);
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl = 0U; /* no sdma, etc */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
- if (rtmp != dd->ipath_rcvtidcnt)
- dev_info(&dd->pcidev->dev, "tidcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
- if (rtmp != dd->ipath_rcvtidbase)
- dev_info(&dd->pcidev->dev, "tidbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvtidbase, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
- if (rtmp != dd->ipath_rcvegrcnt)
- dev_info(&dd->pcidev->dev, "egrcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrcnt, rtmp);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
- if (rtmp != dd->ipath_rcvegrbase)
- dev_info(&dd->pcidev->dev, "egrbase was %u before "
- "reset, now %u, using original\n",
- dd->ipath_rcvegrbase, rtmp);
-
- return 0;
-}
-
-static int init_pioavailregs(struct ipath_devdata *dd)
-{
- int ret;
-
- dd->ipath_pioavailregs_dma = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
- GFP_KERNEL);
- if (!dd->ipath_pioavailregs_dma) {
- ipath_dev_err(dd, "failed to allocate PIOavail reg area "
- "in memory\n");
- ret = -ENOMEM;
- goto done;
- }
-
- /*
- * we really want L2 cache aligned, but for current CPUs of
- * interest, they are the same.
- */
- dd->ipath_statusp = (u64 *)
- ((char *)dd->ipath_pioavailregs_dma +
- ((2 * L1_CACHE_BYTES +
- dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
- /* copy the current value now that it's really allocated */
- *dd->ipath_statusp = dd->_ipath_status;
- /*
- * setup buffer to hold freeze msg, accessible to apps,
- * following statusp
- */
- dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
- /* and its length */
- dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
-
- ret = 0;
-
-done:
- return ret;
-}
-
-/**
- * init_shadow_tids - allocate the shadow TID array
- * @dd: the infinipath device
- *
- * allocate the shadow TID array, so we can ipath_munlock previous
- * entries. It may make more sense to move the pageshadow to the
- * port data structure, so we only allocate memory for ports actually
- * in use, since we at 8k per port, now.
- */
-static void init_shadow_tids(struct ipath_devdata *dd)
-{
- struct page **pages;
- dma_addr_t *addrs;
-
- pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(struct page *));
- if (!pages) {
- ipath_dev_err(dd, "failed to allocate shadow page * "
- "array, no expected sends!\n");
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
- sizeof(dma_addr_t));
- if (!addrs) {
- ipath_dev_err(dd, "failed to allocate shadow dma handle "
- "array, no expected sends!\n");
- vfree(pages);
- dd->ipath_pageshadow = NULL;
- return;
- }
-
- dd->ipath_pageshadow = pages;
- dd->ipath_physshadow = addrs;
-}
-
-static void enable_chip(struct ipath_devdata *dd, int reinit)
-{
- u32 val;
- u64 rcvmask;
- unsigned long flags;
- int i;
-
- if (!reinit)
- init_waitqueue_head(&ipath_state_wait);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /* Enable PIO send, and update of PIOavail regs to memory. */
- dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
- INFINIPATH_S_PIOBUFAVAILUPD;
-
- /*
- * Set the PIO avail update threshold to host memory
- * on chips that support it.
- */
- if (dd->ipath_pioupd_thresh)
- dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
- << INFINIPATH_S_UPDTHRESH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /*
- * Enable kernel ports' receive and receive interrupt.
- * Other ports done as user opens and inits them.
- */
- rcvmask = 1ULL;
- dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
- (rcvmask << dd->ipath_r_intravail_shift);
- if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
- dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
-
- /*
- * now ready for use. this should be cleared whenever we
- * detect a reset, or initiate one.
- */
- dd->ipath_flags |= IPATH_INITTED;
-
- /*
- * Init our shadow copies of head from tail values,
- * and write head values to match.
- */
- val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
- ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
-
- /* Initialize so we interrupt on next packet received */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
-
- /*
- * by now pioavail updates to memory should have occurred, so
- * copy them into our working/shadow registers; this is in
- * case something went wrong with abort, but mostly to get the
- * initial values of the generation bit correct.
- */
- for (i = 0; i < dd->ipath_pioavregs; i++) {
- __le64 pioavail;
-
- /*
- * Chip Errata bug 6641; even and odd qwords>3 are swapped.
- */
- if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
- else
- pioavail = dd->ipath_pioavailregs_dma[i];
- /*
- * don't need to worry about ipath_pioavailkernel here
- * because we will call ipath_chg_pioavailkernel() later
- * in initialization, to busy out buffers as needed
- */
- dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
- }
- /* can get counters, stats, etc. */
- dd->ipath_flags |= IPATH_PRESENT;
-}
-
-static int init_housekeeping(struct ipath_devdata *dd, int reinit)
-{
- char boardn[40];
- int ret = 0;
-
- /*
- * have to clear shadow copies of registers at init that are
- * not otherwise set here, or all kinds of bizarre things
- * happen with driver on chip reset
- */
- dd->ipath_rcvhdrsize = 0;
-
- /*
- * Don't clear ipath_flags as 8bit mode was set before
- * entering this func. However, we do set the linkstate to
- * unknown, so we can watch for a transition.
- * PRESENT is set because we want register reads to work,
- * and the kernel infrastructure saw it in config space;
- * We clear it if we have failures.
- */
- dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
- dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
- IPATH_LINKDOWN | IPATH_LINKINIT);
-
- ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
- dd->ipath_revision =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
-
- /*
- * set up fundamental info we need to use the chip; we assume
- * if the revision reg and these regs are OK, we don't need to
- * special case the rest
- */
- dd->ipath_sregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
- dd->ipath_cregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
- dd->ipath_uregbase =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
- ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
- "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
- dd->ipath_uregbase, dd->ipath_cregbase);
- if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
- || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
- || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
- ipath_dev_err(dd, "Register read failures from chip, "
- "giving up initialization\n");
- dd->ipath_flags &= ~IPATH_PRESENT;
- ret = -ENODEV;
- goto done;
- }
-
-
- /* clear diagctrl register, in case diags were running and crashed */
- ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
-
- /* clear the initial reset flag, in case first driver load */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- INFINIPATH_E_RESET);
-
- ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
- (unsigned long long) dd->ipath_revision,
- dd->ipath_pcirev);
-
- if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
- ipath_dev_err(dd, "Driver only handles version %d, "
- "chip swversion is %d (%llx), failng\n",
- IPATH_CHIP_SWVERSION,
- (int)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK,
- (unsigned long long) dd->ipath_revision);
- ret = -ENOSYS;
- goto done;
- }
- dd->ipath_majrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
- INFINIPATH_R_CHIPREVMAJOR_MASK);
- dd->ipath_minrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_CHIPREVMINOR_SHIFT) &
- INFINIPATH_R_CHIPREVMINOR_MASK);
- dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
- INFINIPATH_R_BOARDID_SHIFT) &
- INFINIPATH_R_BOARDID_MASK);
-
- ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
-
- snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
- "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
- "SW Compat %u\n",
- IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
- (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
- INFINIPATH_R_ARCH_MASK,
- dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
- (unsigned)(dd->ipath_revision >>
- INFINIPATH_R_SOFTWARE_SHIFT) &
- INFINIPATH_R_SOFTWARE_MASK);
-
- ipath_dbg("%s", dd->ipath_boardversion);
-
- if (ret)
- goto done;
-
- if (reinit)
- ret = init_chip_reset(dd);
- else
- ret = init_chip_first(dd);
-
-done:
- return ret;
-}
-
-static void verify_interrupt(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
-
- if (!dd)
- return; /* being torn down */
-
- /*
- * If we don't have any interrupts, let the user know and
- * don't bother checking again.
- */
- if (dd->ipath_int_counter == 0) {
- if (!dd->ipath_f_intr_fallback(dd))
- dev_err(&dd->pcidev->dev, "No interrupts detected, "
- "not usable.\n");
- else /* re-arm the timer to see if fallback works */
- mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
- } else
- ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
- dd->ipath_int_counter);
-}
-
-/**
- * ipath_init_chip - do the actual initialization sequence on the chip
- * @dd: the infinipath device
- * @reinit: reinitializing, so don't allocate new memory
- *
- * Do the actual initialization sequence on the chip. This is done
- * both from the init routine called from the PCI infrastructure, and
- * when we reset the chip, or detect that it was reset internally,
- * or it's administratively re-enabled.
- *
- * Memory allocation here and in called routines is only done in
- * the first case (reinit == 0). We have to be careful, because even
- * without memory allocation, we need to re-write all the chip registers
- * TIDs, etc. after the reset or enable has completed.
- */
-int ipath_init_chip(struct ipath_devdata *dd, int reinit)
-{
- int ret = 0;
- u32 kpiobufs, defkbufs;
- u32 piobufs, uports;
- u64 val;
- struct ipath_portdata *pd;
- gfp_t gfp_flags = GFP_USER | __GFP_COMP;
-
- ret = init_housekeeping(dd, reinit);
- if (ret)
- goto done;
-
- /*
- * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
- * but then it no longer nicely fits power of two, and since
- * we now use routines that backend onto __get_free_pages, the
- * rest would be wasted.
- */
- dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
- dd->ipath_rcvhdrcnt);
-
- /*
- * Set up the shadow copies of the piobufavail registers,
- * which we compare against the chip registers for now, and
- * the in memory DMA'ed copies of the registers. This has to
- * be done early, before we calculate lastport, etc.
- */
- piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /*
- * calc number of pioavail registers, and save it; we have 2
- * bits per buffer.
- */
- dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
- / (sizeof(u64) * BITS_PER_BYTE / 2);
- uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
- if (piobufs > 144)
- defkbufs = 32 + dd->ipath_pioreserved;
- else
- defkbufs = 16 + dd->ipath_pioreserved;
-
- if (ipath_kpiobufs && (ipath_kpiobufs +
- (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
- int i = (int) piobufs -
- (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
- if (i < 1)
- i = 1;
- dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
- "%d for kernel leaves too few for %d user ports "
- "(%d each); using %u\n", ipath_kpiobufs,
- piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
- /*
- * shouldn't change ipath_kpiobufs, because could be
- * different for different devices...
- */
- kpiobufs = i;
- } else if (ipath_kpiobufs)
- kpiobufs = ipath_kpiobufs;
- else
- kpiobufs = defkbufs;
- dd->ipath_lastport_piobuf = piobufs - kpiobufs;
- dd->ipath_pbufsport =
- uports ? dd->ipath_lastport_piobuf / uports : 0;
- /* if not an even divisor, some user ports get extra buffers */
- dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
- (dd->ipath_pbufsport * uports);
- if (dd->ipath_ports_extrabuf)
- ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
- "ports <= %u\n", dd->ipath_pbufsport,
- dd->ipath_ports_extrabuf);
- dd->ipath_lastpioindex = 0;
- dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
- /* ipath_pioavailshadow initialized earlier */
- ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
- "each for %u user ports\n", kpiobufs,
- piobufs, dd->ipath_pbufsport, uports);
- ret = dd->ipath_f_early_init(dd);
- if (ret) {
- ipath_dev_err(dd, "Early initialization failure\n");
- goto done;
- }
-
- /*
- * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
- * done after early_init.
- */
- dd->ipath_hdrqlast =
- dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
- dd->ipath_rcvhdrentsize);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
- dd->ipath_rcvhdrsize);
-
- if (!reinit) {
- ret = init_pioavailregs(dd);
- init_shadow_tids(dd);
- if (ret)
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
- dd->ipath_pioavailregs_phys);
-
- /*
- * this is to detect s/w errors, which the h/w works around by
- * ignoring the low 6 bits of address, if it wasn't aligned.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
- if (val != dd->ipath_pioavailregs_phys) {
- ipath_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->ipath_pioavailregs_phys,
- (unsigned long long) val);
- ret = -EINVAL;
- goto done;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
-
- /*
- * make sure we are not in freeze, and PIO send enabled, so
- * writes to pbc happen
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
-
- /*
- * before error clears, since we expect serdes pll errors during
- * this, the first time after reset
- */
- if (bringup_link(dd)) {
- dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
- ret = -ENETDOWN;
- goto done;
- }
-
- /*
- * clear any "expected" hwerrs from reset and/or initialization
- * clear any that aren't enabled (at least this once), and then
- * set the enable mask
- */
- dd->ipath_f_init_hwerrors(dd);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
-
- /* clear all */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
- /* enable errors that are masked, at least this first time. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- ~dd->ipath_maskederrs);
- dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
- dd->ipath_errormask =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
- /* clear any interrupts up to this point (ints still not enabled) */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
-
- dd->ipath_f_tidtemplate(dd);
-
- /*
- * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
- * re-init, the simplest way to handle this is to free
- * existing, and re-allocate.
- * Need to re-create rest of port 0 portdata as well.
- */
- pd = dd->ipath_pd[0];
- if (reinit) {
- struct ipath_portdata *npd;
-
- /*
- * Alloc and init new ipath_portdata for port0,
- * Then free old pd. Could lead to fragmentation, but also
- * makes later support for hot-swap easier.
- */
- npd = create_portdata0(dd);
- if (npd) {
- ipath_free_pddata(dd, pd);
- dd->ipath_pd[0] = npd;
- pd = npd;
- } else {
- ipath_dev_err(dd, "Unable to allocate portdata"
- " for port 0, failing\n");
- ret = -ENOMEM;
- goto done;
- }
- }
- ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret)
- ret = create_port0_egr(dd);
- if (ret) {
- ipath_dev_err(dd, "failed to allocate kernel port's "
- "rcvhdrq and/or egr bufs\n");
- goto done;
- }
- else
- enable_chip(dd, reinit);
-
- /* after enable_chip, so pioavailshadow setup */
- ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
-
- /*
- * Cancel any possible active sends from early driver load.
- * Follows early_init because some chips have to initialize
- * PIO buffers in early_init to avoid false parity errors.
- * After enable and ipath_chg_pioavailkernel so we can safely
- * enable pioavail updates and PIOENABLE; packets are now
- * ready to go out.
- */
- ipath_cancel_sends(dd, 1);
-
- if (!reinit) {
- /*
- * Used when we close a port, for DMA already in flight
- * at close.
- */
- dd->ipath_dummy_hdrq = dma_alloc_coherent(
- &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
- &dd->ipath_dummy_hdrq_phys,
- gfp_flags);
- if (!dd->ipath_dummy_hdrq) {
- dev_info(&dd->pcidev->dev,
- "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
- dd->ipath_pd[0]->port_rcvhdrq_size);
- /* fallback to just 0'ing */
- dd->ipath_dummy_hdrq_phys = 0UL;
- }
- }
-
- /*
- * cause retrigger of pending interrupts ignored during init,
- * even if we had errors
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
-
- if (!dd->ipath_stats_timer_active) {
- /*
- * first init, or after an admin disable/enable
- * set up stats retrieval timer, even if we had errors
- * in last portion of setup
- */
- init_timer(&dd->ipath_stats_timer);
- dd->ipath_stats_timer.function = ipath_get_faststats;
- dd->ipath_stats_timer.data = (unsigned long) dd;
- /* every 5 seconds; */
- dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
- /* takes ~16 seconds to overflow at full IB 4x bandwdith */
- add_timer(&dd->ipath_stats_timer);
- dd->ipath_stats_timer_active = 1;
- }
-
- /* Set up SendDMA if chip supports it */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ret = setup_sdma(dd);
-
- /* Set up HoL state */
- init_timer(&dd->ipath_hol_timer);
- dd->ipath_hol_timer.function = ipath_hol_event;
- dd->ipath_hol_timer.data = (unsigned long)dd;
- dd->ipath_hol_state = IPATH_HOL_UP;
-
-done:
- if (!ret) {
- *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
- if (!dd->ipath_f_intrsetup(dd)) {
- /* now we can enable all interrupts from the chip */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
- -1LL);
- /* force re-interrupt of any pending interrupts. */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
- 0ULL);
- /* chip is usable; mark it as initialized */
- *dd->ipath_statusp |= IPATH_STATUS_INITTED;
-
- /*
- * setup to verify we get an interrupt, and fallback
- * to an alternate if necessary and possible
- */
- if (!reinit) {
- init_timer(&dd->ipath_intrchk_timer);
- dd->ipath_intrchk_timer.function =
- verify_interrupt;
- dd->ipath_intrchk_timer.data =
- (unsigned long) dd;
- }
- dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
- add_timer(&dd->ipath_intrchk_timer);
- } else
- ipath_dev_err(dd, "No interrupts enabled, couldn't "
- "setup interrupt address\n");
-
- if (dd->ipath_cfgports > ipath_stats.sps_nports)
- /*
- * sps_nports is a global, so, we set it to
- * the highest number of ports of any of the
- * chips we find; we never decrement it, at
- * least for now. Since this might have changed
- * over disable/enable or prior to reset, always
- * do the check and potentially adjust.
- */
- ipath_stats.sps_nports = dd->ipath_cfgports;
- } else
- ipath_dbg("Failed (%d) to initialize chip\n", ret);
-
- /* if ret is non-zero, we probably should do some cleanup
- here... */
- return ret;
-}
-
-static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
-{
- struct ipath_devdata *dd;
- unsigned long flags;
- unsigned short val;
- int ret;
-
- ret = ipath_parse_ushort(str, &val);
-
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- if (ret < 0)
- goto bail;
-
- if (val == 0) {
- ret = -EINVAL;
- goto bail;
- }
-
- list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
- if (dd->ipath_kregbase)
- continue;
- if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
- (dd->ipath_cfgports *
- IPATH_MIN_USER_PORT_BUFCNT)))
- {
- ipath_dev_err(
- dd,
- "Allocating %d PIO bufs for kernel leaves "
- "too few for %d user ports (%d each)\n",
- val, dd->ipath_cfgports - 1,
- IPATH_MIN_USER_PORT_BUFCNT);
- ret = -EINVAL;
- goto bail;
- }
- dd->ipath_lastport_piobuf =
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
- }
-
- ipath_kpiobufs = val;
- ret = 0;
-bail:
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-
-/*
- * Called when we might have an error that is specific to a particular
- * PIO buffer, and may need to cancel that buffer, so it can be re-used.
- */
-void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
-{
- u32 piobcnt;
- unsigned long sbuf[4];
- /*
- * it's possible that sendbuffererror could have bits set; might
- * have already done this as a result of hardware error handling
- */
- piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- /* read these before writing errorclear */
- sbuf[0] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror);
- sbuf[1] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 1);
- if (piobcnt > 128)
- sbuf[2] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 2);
- if (piobcnt > 192)
- sbuf[3] = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_sendbuffererror + 3);
- else
- sbuf[3] = 0;
-
- if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
- int i;
- if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG) &&
- time_after(dd->ipath_lastcancel, jiffies)) {
- __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
- "SendbufErrs %lx %lx", sbuf[0],
- sbuf[1]);
- if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
- printk(" %lx %lx ", sbuf[2], sbuf[3]);
- printk("\n");
- }
-
- for (i = 0; i < piobcnt; i++)
- if (test_bit(i, sbuf))
- ipath_disarm_piobufs(dd, i, 1);
- /* ignore armlaunch errs for a bit */
- dd->ipath_lastcancel = jiffies+3;
- }
-}
-
-
-/* These are all rcv-related errors which we want to count for stats */
-#define E_SUM_PKTERRS \
- (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
- INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
- INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
- INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
-
-/* These are all send-related errors which we want to count for stats */
-#define E_SUM_ERRS \
- (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
- INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
- INFINIPATH_E_INVALIDADDR)
-
-/*
- * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
- * errors not related to freeze and cancelling buffers. Can't ignore
- * armlaunch because could get more while still cleaning up, and need
- * to cancel those as they happen.
- */
-#define E_SPKT_ERRS_IGNORE \
- (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SMINPKTLEN | \
- INFINIPATH_E_SPKTLEN)
-
-/*
- * these are errors that can occur when the link changes state while
- * a packet is being sent or received. This doesn't cover things
- * like EBP or VCRC that can be the result of a sending having the
- * link change state, so we receive a "known bad" packet.
- */
-#define E_SUM_LINK_PKTERRS \
- (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
- INFINIPATH_E_RUNEXPCHAR)
-
-static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
-{
- u64 ignore_this_time = 0;
-
- ipath_disarm_senderrbufs(dd);
- if ((errs & E_SUM_LINK_PKTERRS) &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- /*
- * This can happen when SMA is trying to bring the link
- * up, but the IB link changes state at the "wrong" time.
- * The IB logic then complains that the packet isn't
- * valid. We don't want to confuse people, so we just
- * don't print them, except at debug
- */
- ipath_dbg("Ignoring packet errors %llx, because link not "
- "ACTIVE\n", (unsigned long long) errs);
- ignore_this_time = errs & E_SUM_LINK_PKTERRS;
- }
-
- return ignore_this_time;
-}
-
-/* generic hw error messages... */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_MSG(a) \
- { \
- .mask = ( INFINIPATH_HWE_TXEMEMPARITYERR_##a << \
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT ), \
- .msg = "TXE " #a " Memory Parity" \
- }
-#define INFINIPATH_HWE_RXEMEMPARITYERR_MSG(a) \
- { \
- .mask = ( INFINIPATH_HWE_RXEMEMPARITYERR_##a << \
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT ), \
- .msg = "RXE " #a " Memory Parity" \
- }
-
-static const struct ipath_hwerror_msgs ipath_generic_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(IBCBUSFRSPCPARITYERR, "IPATH2IB Parity"),
- INFINIPATH_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2IPATH Parity"),
-
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOBUF),
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOPBC),
- INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOLAUNCHFIFO),
-
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(RCVBUF),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(LOOKUPQ),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EAGERTID),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EXPTID),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(FLAGBUF),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(DATAINFO),
- INFINIPATH_HWE_RXEMEMPARITYERR_MSG(HDRINFO),
-};
-
-/**
- * ipath_format_hwmsg - format a single hwerror message
- * @msg message buffer
- * @msgl length of message buffer
- * @hwmsg message to add to message buffer
- */
-static void ipath_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
-{
- strlcat(msg, "[", msgl);
- strlcat(msg, hwmsg, msgl);
- strlcat(msg, "]", msgl);
-}
-
-/**
- * ipath_format_hwerrors - format hardware error messages for display
- * @hwerrs hardware errors bit vector
- * @hwerrmsgs hardware error descriptions
- * @nhwerrmsgs number of hwerrmsgs
- * @msg message buffer
- * @msgl message buffer length
- */
-void ipath_format_hwerrors(u64 hwerrs,
- const struct ipath_hwerror_msgs *hwerrmsgs,
- size_t nhwerrmsgs,
- char *msg, size_t msgl)
-{
- int i;
- const int glen =
- ARRAY_SIZE(ipath_generic_hwerror_msgs);
-
- for (i=0; i<glen; i++) {
- if (hwerrs & ipath_generic_hwerror_msgs[i].mask) {
- ipath_format_hwmsg(msg, msgl,
- ipath_generic_hwerror_msgs[i].msg);
- }
- }
-
- for (i=0; i<nhwerrmsgs; i++) {
- if (hwerrs & hwerrmsgs[i].mask) {
- ipath_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
- }
- }
-}
-
-/* return the strings for the most common link states */
-static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
-{
- char *ret;
- u32 state;
-
- state = ipath_ib_state(dd, ibcs);
- if (state == dd->ib_init)
- ret = "Init";
- else if (state == dd->ib_arm)
- ret = "Arm";
- else if (state == dd->ib_active)
- ret = "Active";
- else
- ret = "Down";
- return ret;
-}
-
-void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev)
-{
- struct ib_event event;
-
- event.device = &dd->verbs_dev->ibdev;
- event.element.port_num = 1;
- event.event = ev;
- ib_dispatch_event(&event);
-}
-
-static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
- ipath_err_t errs)
-{
- u32 ltstate, lstate, ibstate, lastlstate;
- u32 init = dd->ib_init;
- u32 arm = dd->ib_arm;
- u32 active = dd->ib_active;
- const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
-
- lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
- ibstate = ipath_ib_state(dd, ibcs);
- /* linkstate at last interrupt */
- lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
- ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
-
- /*
- * Since going into a recovery state causes the link state to go
- * down and since recovery is transitory, it is better if we "miss"
- * ever seeing the link training state go into recovery (i.e.,
- * ignore this transition for link state special handling purposes)
- * without even updating ipath_lastibcstat.
- */
- if ((ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN) ||
- (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT) ||
- (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERIDLE))
- goto done;
-
- /*
- * if linkstate transitions into INIT from any of the various down
- * states, or if it transitions from any of the up (INIT or better)
- * states into any of the down states (except link recovery), then
- * call the chip-specific code to take appropriate actions.
- */
- if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
- lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
- /* transitioned to UP */
- if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
- /* link came up, so we must no longer be disabled */
- dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
- ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
- goto skip_ibchange; /* chip-code handled */
- }
- } else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
- (dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
- ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT &&
- ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
- int handled;
- handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
- dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
- if (handled) {
- ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
- goto skip_ibchange; /* chip-code handled */
- }
- }
-
- /*
- * Significant enough to always print and get into logs, if it was
- * unexpected. If it was a requested state change, we'll have
- * already cleared the flags, so we won't print this warning
- */
- if ((ibstate != arm && ibstate != active) &&
- (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
- dev_info(&dd->pcidev->dev, "Link state changed from %s "
- "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
- "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
- }
-
- if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
- ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- u32 lastlts;
- lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
- /*
- * Ignore cycling back and forth from Polling.Active to
- * Polling.Quiet while waiting for the other end of the link
- * to come up, except to try and decide if we are connected
- * to a live IB device or not. We will cycle back and
- * forth between them if no cable is plugged in, the other
- * device is powered off or disabled, etc.
- */
- if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
- lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
- (++dd->ipath_ibpollcnt == 40)) {
- dd->ipath_flags |= IPATH_NOCABLE;
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_NOCABLE;
- ipath_cdbg(LINKVERB, "Set NOCABLE\n");
- }
- ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
- ipath_ibcstatus_str[ltstate], ibstate);
- goto skip_ibchange;
- }
- }
-
- dd->ipath_ibpollcnt = 0; /* not poll*, now */
- ipath_stats.sps_iblink++;
-
- if (ibstate != init && dd->ipath_lastlinkrecov && ipath_linkrecovery) {
- u64 linkrecov;
- linkrecov = ipath_snap_cntr(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- if (linkrecov != dd->ipath_lastlinkrecov) {
- ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
- (unsigned long long) ibcs,
- ib_linkstate(dd, ibcs),
- ipath_ibcstatus_str[ltstate],
- (unsigned long long) linkrecov);
- /* and no more until active again */
- dd->ipath_lastlinkrecov = 0;
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- goto skip_ibchange;
- }
- }
-
- if (ibstate == init || ibstate == arm || ibstate == active) {
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
- if (ibstate == init || ibstate == arm) {
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- }
- if (ibstate == arm) {
- dd->ipath_flags |= IPATH_LINKARMED;
- dd->ipath_flags &= ~(IPATH_LINKUNK |
- IPATH_LINKINIT | IPATH_LINKDOWN |
- IPATH_LINKACTIVE | IPATH_NOCABLE);
- ipath_hol_down(dd);
- } else if (ibstate == init) {
- /*
- * set INIT and DOWN. Down is checked by
- * most of the other code, but INIT is
- * useful to know in a few places.
- */
- dd->ipath_flags |= IPATH_LINKINIT |
- IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK |
- IPATH_LINKARMED | IPATH_LINKACTIVE |
- IPATH_NOCABLE);
- ipath_hol_down(dd);
- } else { /* active */
- dd->ipath_lastlinkrecov = ipath_snap_cntr(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
- dd->ipath_flags |= IPATH_LINKACTIVE;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKDOWN | IPATH_LINKARMED |
- IPATH_NOCABLE);
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ipath_restart_sdma(dd);
- signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
- /* LED active not handled in chip _f_updown */
- dd->ipath_f_setextled(dd, lstate, ltstate);
- ipath_hol_up(dd);
- }
-
- /*
- * print after we've already done the work, so as not to
- * delay the state changes and notifications, for debugging
- */
- if (lstate == lastlstate)
- ipath_cdbg(LINKVERB, "Unchanged from last: %s "
- "(%x)\n", ib_linkstate(dd, ibcs), ibstate);
- else
- ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
- dd->ipath_unit, ib_linkstate(dd, ibcs),
- ipath_ibcstatus_str[ltstate], ibstate);
- } else { /* down */
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- dd->ipath_flags |= IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKACTIVE |
- IPATH_LINKARMED);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- dd->ipath_lli_counter = 0;
-
- if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
- ipath_cdbg(VERBOSE, "Unit %u link state down "
- "(state 0x%x), from %s\n",
- dd->ipath_unit, lstate,
- ib_linkstate(dd, dd->ipath_lastibcstat));
- else
- ipath_cdbg(LINKVERB, "Unit %u link state changed "
- "to %s (0x%x) from down (%x)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate],
- ibstate, lastlstate);
- }
-
-skip_ibchange:
- dd->ipath_lastibcstat = ibcs;
-done:
- return;
-}
-
-static void handle_supp_msgs(struct ipath_devdata *dd,
- unsigned supp_msgs, char *msg, u32 msgsz)
-{
- /*
- * Print the message unless it's ibc status change only, which
- * happens so often we never want to count it.
- */
- if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
- int iserr;
- ipath_err_t mask;
- iserr = ipath_decode_err(dd, msg, msgsz,
- dd->ipath_lasterror &
- ~INFINIPATH_E_IBSTATUSCHANGED);
-
- mask = INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_PKTERRS | INFINIPATH_E_SDMADISABLED;
-
- /* if we're in debug, then don't mask SDMADISABLED msgs */
- if (ipath_debug & __IPATH_DBG)
- mask &= ~INFINIPATH_E_SDMADISABLED;
-
- if (dd->ipath_lasterror & ~mask)
- ipath_dev_err(dd, "Suppressed %u messages for "
- "fast-repeating errors (%s) (%llx)\n",
- supp_msgs, msg,
- (unsigned long long)
- dd->ipath_lasterror);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal", for some
- * types of processes (mostly benchmarks) that send
- * huge numbers of messages, while not processing
- * them. So only complain about these at debug
- * level.
- */
- if (iserr)
- ipath_dbg("Suppressed %u messages for %s\n",
- supp_msgs, msg);
- else
- ipath_cdbg(ERRPKT,
- "Suppressed %u messages for %s\n",
- supp_msgs, msg);
- }
- }
-}
-
-static unsigned handle_frequent_errors(struct ipath_devdata *dd,
- ipath_err_t errs, char *msg,
- u32 msgsz, int *noprint)
-{
- unsigned long nc;
- static unsigned long nextmsg_time;
- static unsigned nmsgs, supp_msgs;
-
- /*
- * Throttle back "fast" messages to no more than 10 per 5 seconds.
- * This isn't perfect, but it's a reasonable heuristic. If we get
- * more than 10, give a 6x longer delay.
- */
- nc = jiffies;
- if (nmsgs > 10) {
- if (time_before(nc, nextmsg_time)) {
- *noprint = 1;
- if (!supp_msgs++)
- nextmsg_time = nc + HZ * 3;
- }
- else if (supp_msgs) {
- handle_supp_msgs(dd, supp_msgs, msg, msgsz);
- supp_msgs = 0;
- nmsgs = 0;
- }
- }
- else if (!nmsgs++ || time_after(nc, nextmsg_time))
- nextmsg_time = nc + HZ / 2;
-
- return supp_msgs;
-}
-
-static void handle_sdma_errors(struct ipath_devdata *dd, ipath_err_t errs)
-{
- unsigned long flags;
- int expected;
-
- if (ipath_debug & __IPATH_DBG) {
- char msg[128];
- ipath_decode_err(dd, msg, sizeof msg, errs &
- INFINIPATH_E_SDMAERRS);
- ipath_dbg("errors %lx (%s)\n", (unsigned long)errs, msg);
- }
- if (ipath_debug & __IPATH_VERBDBG) {
- unsigned long tl, hd, status, lengen;
- tl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
- hd = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
- status = ipath_read_kreg64(dd
- , dd->ipath_kregs->kr_senddmastatus);
- lengen = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_senddmalengen);
- ipath_cdbg(VERBOSE, "sdma tl 0x%lx hd 0x%lx status 0x%lx "
- "lengen 0x%lx\n", tl, hd, status, lengen);
- }
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- expected = test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!expected)
- ipath_cancel_sends(dd, 1);
-}
-
-static void handle_sdma_intr(struct ipath_devdata *dd, u64 istat)
-{
- unsigned long flags;
- int expected;
-
- if ((istat & INFINIPATH_I_SDMAINT) &&
- !test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- ipath_sdma_intr(dd);
-
- if (istat & INFINIPATH_I_SDMADISABLED) {
- expected = test_bit(IPATH_SDMA_ABORTING,
- &dd->ipath_sdma_status);
- ipath_dbg("%s SDmaDisabled intr\n",
- expected ? "expected" : "unexpected");
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!expected)
- ipath_cancel_sends(dd, 1);
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- }
-}
-
-static int handle_hdrq_full(struct ipath_devdata *dd)
-{
- int chkerrpkts = 0;
- u32 hd, tl;
- u32 i;
-
- ipath_stats.sps_hdrqfull++;
- for (i = 0; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (i == 0) {
- /*
- * For kernel receive queues, we just want to know
- * if there are packets in the queue that we can
- * process.
- */
- if (pd->port_head != ipath_get_hdrqtail(pd))
- chkerrpkts |= 1 << i;
- continue;
- }
-
- /* Skip if user context is not open */
- if (!pd || !pd->port_cnt)
- continue;
-
- /* Don't report the same point multiple times. */
- if (dd->ipath_flags & IPATH_NODMA_RTAIL)
- tl = ipath_read_ureg32(dd, ur_rcvhdrtail, i);
- else
- tl = ipath_get_rcvhdrtail(pd);
- if (tl == pd->port_lastrcvhdrqtail)
- continue;
-
- hd = ipath_read_ureg32(dd, ur_rcvhdrhead, i);
- if (hd == (tl + 1) || (!hd && tl == dd->ipath_hdrqlast)) {
- pd->port_lastrcvhdrqtail = tl;
- pd->port_hdrqfull++;
- /* flush hdrqfull so that poll() sees it */
- wmb();
- wake_up_interruptible(&pd->port_wait);
- }
- }
-
- return chkerrpkts;
-}
-
-static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
-{
- char msg[128];
- u64 ignore_this_time = 0;
- u64 iserr = 0;
- int chkerrpkts = 0, noprint = 0;
- unsigned supp_msgs;
- int log_idx;
-
- /*
- * don't report errors that are masked, either at init
- * (not set in ipath_errormask), or temporarily (set in
- * ipath_maskederrs)
- */
- errs &= dd->ipath_errormask & ~dd->ipath_maskederrs;
-
- supp_msgs = handle_frequent_errors(dd, errs, msg, (u32)sizeof msg,
- &noprint);
-
- /* do these first, they are most important */
- if (errs & INFINIPATH_E_HARDWARE) {
- /* reuse same msg buf */
- dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
- } else {
- u64 mask;
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) {
- mask = dd->ipath_eep_st_masks[log_idx].errs_to_log;
- if (errs & mask)
- ipath_inc_eeprom_err(dd, log_idx, 1);
- }
- }
-
- if (errs & INFINIPATH_E_SDMAERRS)
- handle_sdma_errors(dd, errs);
-
- if (!noprint && (errs & ~dd->ipath_e_bitsextant))
- ipath_dev_err(dd, "error interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (errs & ~dd->ipath_e_bitsextant));
-
- if (errs & E_SUM_ERRS)
- ignore_this_time = handle_e_sum_errs(dd, errs);
- else if ((errs & E_SUM_LINK_PKTERRS) &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- /*
- * This can happen when SMA is trying to bring the link
- * up, but the IB link changes state at the "wrong" time.
- * The IB logic then complains that the packet isn't
- * valid. We don't want to confuse people, so we just
- * don't print them, except at debug
- */
- ipath_dbg("Ignoring packet errors %llx, because link not "
- "ACTIVE\n", (unsigned long long) errs);
- ignore_this_time = errs & E_SUM_LINK_PKTERRS;
- }
-
- if (supp_msgs == 250000) {
- int s_iserr;
- /*
- * It's not entirely reasonable assuming that the errors set
- * in the last clear period are all responsible for the
- * problem, but the alternative is to assume it's the only
- * ones on this particular interrupt, which also isn't great
- */
- dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
-
- dd->ipath_errormask &= ~dd->ipath_maskederrs;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- s_iserr = ipath_decode_err(dd, msg, sizeof msg,
- dd->ipath_maskederrs);
-
- if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL |
- INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
- ipath_dev_err(dd, "Temporarily disabling "
- "error(s) %llx reporting; too frequent (%s)\n",
- (unsigned long long) dd->ipath_maskederrs,
- msg);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal",
- * for some types of processes (mostly benchmarks)
- * that send huge numbers of messages, while not
- * processing them. So only complain about
- * these at debug level.
- */
- if (s_iserr)
- ipath_dbg("Temporarily disabling reporting "
- "too frequent queue full errors (%s)\n",
- msg);
- else
- ipath_cdbg(ERRPKT,
- "Temporarily disabling reporting too"
- " frequent packet errors (%s)\n",
- msg);
- }
-
- /*
- * Re-enable the masked errors after around 3 minutes. in
- * ipath_get_faststats(). If we have a series of fast
- * repeating but different errors, the interval will keep
- * stretching out, but that's OK, as that's pretty
- * catastrophic.
- */
- dd->ipath_unmasktime = jiffies + HZ * 180;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
- if (ignore_this_time)
- errs &= ~ignore_this_time;
- if (errs & ~dd->ipath_lasterror) {
- errs &= ~dd->ipath_lasterror;
- /* never suppress duplicate hwerrors or ibstatuschange */
- dd->ipath_lasterror |= errs &
- ~(INFINIPATH_E_HARDWARE |
- INFINIPATH_E_IBSTATUSCHANGED);
- }
-
- if (errs & INFINIPATH_E_SENDSPECIALTRIGGER) {
- dd->ipath_spectriggerhit++;
- ipath_dbg("%lu special trigger hits\n",
- dd->ipath_spectriggerhit);
- }
-
- /* likely due to cancel; so suppress message unless verbose */
- if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
- time_after(dd->ipath_lastcancel, jiffies)) {
- /* armlaunch takes precedence; it often causes both. */
- ipath_cdbg(VERBOSE,
- "Suppressed %s error (%llx) after sendbuf cancel\n",
- (errs & INFINIPATH_E_SPIOARMLAUNCH) ?
- "armlaunch" : "sendpktlen", (unsigned long long)errs);
- errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
- }
-
- if (!errs)
- return 0;
-
- if (!noprint) {
- ipath_err_t mask;
- /*
- * The ones we mask off are handled specially below
- * or above. Also mask SDMADISABLED by default as it
- * is too chatty.
- */
- mask = INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_HARDWARE | INFINIPATH_E_SDMADISABLED;
-
- /* if we're in debug, then don't mask SDMADISABLED msgs */
- if (ipath_debug & __IPATH_DBG)
- mask &= ~INFINIPATH_E_SDMADISABLED;
-
- ipath_decode_err(dd, msg, sizeof msg, errs & ~mask);
- } else
- /* so we don't need if (!noprint) at strlcat's below */
- *msg = 0;
-
- if (errs & E_SUM_PKTERRS) {
- ipath_stats.sps_pkterrs++;
- chkerrpkts = 1;
- }
- if (errs & E_SUM_ERRS)
- ipath_stats.sps_errs++;
-
- if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
- ipath_stats.sps_crcerrs++;
- chkerrpkts = 1;
- }
- iserr = errs & ~(E_SUM_PKTERRS | INFINIPATH_E_PKTERRS);
-
-
- /*
- * We don't want to print these two as they happen, or we can make
- * the situation even worse, because it takes so long to print
- * messages to serial consoles. Kernel ports get printed from
- * fast_stats, no more than every 5 seconds, user ports get printed
- * on close
- */
- if (errs & INFINIPATH_E_RRCVHDRFULL)
- chkerrpkts |= handle_hdrq_full(dd);
- if (errs & INFINIPATH_E_RRCVEGRFULL) {
- struct ipath_portdata *pd = dd->ipath_pd[0];
-
- /*
- * since this is of less importance and not likely to
- * happen without also getting hdrfull, only count
- * occurrences; don't check each port (or even the kernel
- * vs user)
- */
- ipath_stats.sps_etidfull++;
- if (pd->port_head != ipath_get_hdrqtail(pd))
- chkerrpkts |= 1;
- }
-
- /*
- * do this before IBSTATUSCHANGED, in case both bits set in a single
- * interrupt; we want the STATUSCHANGE to "win", so we do our
- * internal copy of state machine correctly
- */
- if (errs & INFINIPATH_E_RIBLOSTLINK) {
- /*
- * force through block below
- */
- errs |= INFINIPATH_E_IBSTATUSCHANGED;
- ipath_stats.sps_iblink++;
- dd->ipath_flags |= IPATH_LINKDOWN;
- dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
- | IPATH_LINKARMED | IPATH_LINKACTIVE);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
-
- ipath_dbg("Lost link, link now down (%s)\n",
- ipath_ibcstatus_str[ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_ibcstatus) & 0xf]);
- }
- if (errs & INFINIPATH_E_IBSTATUSCHANGED)
- handle_e_ibstatuschanged(dd, errs);
-
- if (errs & INFINIPATH_E_RESET) {
- if (!noprint)
- ipath_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
- dd->ipath_flags &= ~IPATH_INITTED; /* needs re-init */
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
- }
-
- if (!noprint && *msg) {
- if (iserr)
- ipath_dev_err(dd, "%s error\n", msg);
- }
- if (dd->ipath_state_wanted & dd->ipath_flags) {
- ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
- "waking\n", dd->ipath_state_wanted,
- dd->ipath_flags);
- wake_up_interruptible(&ipath_state_wait);
- }
-
- return chkerrpkts;
-}
-
-/*
- * try to cleanup as much as possible for anything that might have gone
- * wrong while in freeze mode, such as pio buffers being written by user
- * processes (causing armlaunch), send errors due to going into freeze mode,
- * etc., and try to avoid causing extra interrupts while doing so.
- * Forcibly update the in-memory pioavail register copies after cleanup
- * because the chip won't do it while in freeze mode (the register values
- * themselves are kept correct).
- * Make sure that we don't lose any important interrupts by using the chip
- * feature that says that writing 0 to a bit in *clear that is set in
- * *status will cause an interrupt to be generated again (if allowed by
- * the *mask value).
- */
-void ipath_clear_freeze(struct ipath_devdata *dd)
-{
- /* disable error interrupts, to avoid confusion */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
-
- /* also disable interrupts; errormask is sometimes overwriten */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
-
- ipath_cancel_sends(dd, 1);
-
- /* clear the freeze, and be sure chip saw it */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- /* force in-memory update now we are out of freeze */
- ipath_force_pio_avail_update(dd);
-
- /*
- * force new interrupt if any hwerr, error or interrupt bits are
- * still set, and clear "safe" send packet errors related to freeze
- * and cancelling sends. Re-enable error interrupts before possible
- * force of re-interrupt on pending interrupts.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
- E_SPKT_ERRS_IGNORE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, -1LL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
-}
-
-
-/* this is separate to allow for better optimization of ipath_intr() */
-
-static noinline void ipath_bad_intr(struct ipath_devdata *dd, u32 *unexpectp)
-{
- /*
- * sometimes happen during driver init and unload, don't want
- * to process any interrupts at that point
- */
-
- /* this is just a bandaid, not a fix, if something goes badly
- * wrong */
- if (++*unexpectp > 100) {
- if (++*unexpectp > 105) {
- /*
- * ok, we must be taking somebody else's interrupts,
- * due to a messed up mptable and/or PIRQ table, so
- * unregister the interrupt. We've seen this during
- * linuxbios development work, and it may happen in
- * the future again.
- */
- if (dd->pcidev && dd->ipath_irq) {
- ipath_dev_err(dd, "Now %u unexpected "
- "interrupts, unregistering "
- "interrupt handler\n",
- *unexpectp);
- ipath_dbg("free_irq of irq %d\n",
- dd->ipath_irq);
- dd->ipath_f_free_irq(dd);
- }
- }
- if (ipath_read_ireg(dd, dd->ipath_kregs->kr_intmask)) {
- ipath_dev_err(dd, "%u unexpected interrupts, "
- "disabling interrupts completely\n",
- *unexpectp);
- /*
- * disable all interrupts, something is very wrong
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
- 0ULL);
- }
- } else if (*unexpectp > 1)
- ipath_dbg("Interrupt when not ready, should not happen, "
- "ignoring\n");
-}
-
-static noinline void ipath_bad_regread(struct ipath_devdata *dd)
-{
- static int allbits;
-
- /* separate routine, for better optimization of ipath_intr() */
-
- /*
- * We print the message and disable interrupts, in hope of
- * having a better chance of debugging the problem.
- */
- ipath_dev_err(dd,
- "Read of interrupt status failed (all bits set)\n");
- if (allbits++) {
- /* disable all interrupts, something is very wrong */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
- if (allbits == 2) {
- ipath_dev_err(dd, "Still bad interrupt status, "
- "unregistering interrupt\n");
- dd->ipath_f_free_irq(dd);
- } else if (allbits > 2) {
- if ((allbits % 10000) == 0)
- printk(".");
- } else
- ipath_dev_err(dd, "Disabling interrupts, "
- "multiple errors\n");
- }
-}
-
-static void handle_layer_pioavail(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int ret;
-
- ret = ipath_ib_piobufavail(dd->verbs_dev);
- if (ret > 0)
- goto set;
-
- return;
-set:
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-}
-
-/*
- * Handle receive interrupts for user ports; this means a user
- * process was waiting for a packet to arrive, and didn't want
- * to poll
- */
-static void handle_urcv(struct ipath_devdata *dd, u64 istat)
-{
- u64 portr;
- int i;
- int rcvdint = 0;
-
- /*
- * test_and_clear_bit(IPATH_PORT_WAITING_RCV) and
- * test_and_clear_bit(IPATH_PORT_WAITING_URG) below
- * would both like timely updates of the bits so that
- * we don't pass them by unnecessarily. the rmb()
- * here ensures that we see them promptly -- the
- * corresponding wmb()'s are in ipath_poll_urgent()
- * and ipath_poll_next()...
- */
- rmb();
- portr = ((istat >> dd->ipath_i_rcvavail_shift) &
- dd->ipath_i_rcvavail_mask) |
- ((istat >> dd->ipath_i_rcvurg_shift) &
- dd->ipath_i_rcvurg_mask);
- for (i = 1; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (portr & (1 << i) && pd && pd->port_cnt) {
- if (test_and_clear_bit(IPATH_PORT_WAITING_RCV,
- &pd->port_flag)) {
- clear_bit(i + dd->ipath_r_intravail_shift,
- &dd->ipath_rcvctrl);
- wake_up_interruptible(&pd->port_wait);
- rcvdint = 1;
- } else if (test_and_clear_bit(IPATH_PORT_WAITING_URG,
- &pd->port_flag)) {
- pd->port_urgent++;
- wake_up_interruptible(&pd->port_wait);
- }
- }
- }
- if (rcvdint) {
- /* only want to take one interrupt, so turn off the rcv
- * interrupt for all the ports that we set the rcv_waiting
- * (but never for kernel port)
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- }
-}
-
-irqreturn_t ipath_intr(int irq, void *data)
-{
- struct ipath_devdata *dd = data;
- u64 istat, chk0rcv = 0;
- ipath_err_t estat = 0;
- irqreturn_t ret;
- static unsigned unexpected = 0;
- u64 kportrbits;
-
- ipath_stats.sps_ints++;
-
- if (dd->ipath_int_counter != (u32) -1)
- dd->ipath_int_counter++;
-
- if (!(dd->ipath_flags & IPATH_PRESENT)) {
- /*
- * This return value is not great, but we do not want the
- * interrupt core code to remove our interrupt handler
- * because we don't appear to be handling an interrupt
- * during a chip reset.
- */
- return IRQ_HANDLED;
- }
-
- /*
- * this needs to be flags&initted, not statusp, so we keep
- * taking interrupts even after link goes down, etc.
- * Also, we *must* clear the interrupt at some point, or we won't
- * take it again, which can be real bad for errors, etc...
- */
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- ipath_bad_intr(dd, &unexpected);
- ret = IRQ_NONE;
- goto bail;
- }
-
- istat = ipath_read_ireg(dd, dd->ipath_kregs->kr_intstatus);
-
- if (unlikely(!istat)) {
- ipath_stats.sps_nullintr++;
- ret = IRQ_NONE; /* not our interrupt, or already handled */
- goto bail;
- }
- if (unlikely(istat == -1)) {
- ipath_bad_regread(dd);
- /* don't know if it was our interrupt or not */
- ret = IRQ_NONE;
- goto bail;
- }
-
- if (unexpected)
- unexpected = 0;
-
- if (unlikely(istat & ~dd->ipath_i_bitsextant))
- ipath_dev_err(dd,
- "interrupt with unknown interrupts %Lx set\n",
- (unsigned long long)
- istat & ~dd->ipath_i_bitsextant);
- else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
- ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n",
- (unsigned long long) istat);
-
- if (istat & INFINIPATH_I_ERROR) {
- ipath_stats.sps_errints++;
- estat = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_errorstatus);
- if (!estat)
- dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
- "but no error bits set!\n",
- (unsigned long long) istat);
- else if (estat == -1LL)
- /*
- * should we try clearing all, or hope next read
- * works?
- */
- ipath_dev_err(dd, "Read of error status failed "
- "(all bits set); ignoring\n");
- else
- chk0rcv |= handle_errors(dd, estat);
- }
-
- if (istat & INFINIPATH_I_GPIO) {
- /*
- * GPIO interrupts fall in two broad classes:
- * GPIO_2 indicates (on some HT4xx boards) that a packet
- * has arrived for Port 0. Checking for this
- * is controlled by flag IPATH_GPIO_INTR.
- * GPIO_3..5 on IBA6120 Rev2 and IBA6110 Rev4 chips indicate
- * errors that we need to count. Checking for this
- * is controlled by flag IPATH_GPIO_ERRINTRS.
- */
- u32 gpiostatus;
- u32 to_clear = 0;
-
- gpiostatus = ipath_read_kreg32(
- dd, dd->ipath_kregs->kr_gpio_status);
- /* First the error-counter case. */
- if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
- (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
- /* want to clear the bits we see asserted. */
- to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
-
- /*
- * Count appropriately, clear bits out of our copy,
- * as they have been "handled".
- */
- if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
- ipath_dbg("FlowCtl on UnsupVL\n");
- dd->ipath_rxfc_unsupvl_errs++;
- }
- if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
- ipath_dbg("Overrun Threshold exceeded\n");
- dd->ipath_overrun_thresh_errs++;
- }
- if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
- ipath_dbg("Local Link Integrity error\n");
- dd->ipath_lli_errs++;
- }
- gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
- }
- /* Now the Port0 Receive case */
- if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
- (dd->ipath_flags & IPATH_GPIO_INTR)) {
- /*
- * GPIO status bit 2 is set, and we expected it.
- * clear it and indicate in p0bits.
- * This probably only happens if a Port0 pkt
- * arrives at _just_ the wrong time, and we
- * handle that by seting chk0rcv;
- */
- to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
- gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
- chk0rcv = 1;
- }
- if (gpiostatus) {
- /*
- * Some unexpected bits remain. If they could have
- * caused the interrupt, complain and clear.
- * To avoid repetition of this condition, also clear
- * the mask. It is almost certainly due to error.
- */
- const u32 mask = (u32) dd->ipath_gpio_mask;
-
- if (mask & gpiostatus) {
- ipath_dbg("Unexpected GPIO IRQ bits %x\n",
- gpiostatus & mask);
- to_clear |= (gpiostatus & mask);
- dd->ipath_gpio_mask &= ~(gpiostatus & mask);
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
- }
- if (to_clear) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
- (u64) to_clear);
- }
- }
-
- /*
- * Clear the interrupt bits we found set, unless they are receive
- * related, in which case we already cleared them above, and don't
- * want to clear them again, because we might lose an interrupt.
- * Clear it early, so we "know" know the chip will have seen this by
- * the time we process the queue, and will re-interrupt if necessary.
- * The processor itself won't take the interrupt again until we return.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
-
- /*
- * Handle kernel receive queues before checking for pio buffers
- * available since receives can overflow; piobuf waiters can afford
- * a few extra cycles, since they were waiting anyway, and user's
- * waiting for receive are at the bottom.
- */
- kportrbits = (1ULL << dd->ipath_i_rcvavail_shift) |
- (1ULL << dd->ipath_i_rcvurg_shift);
- if (chk0rcv || (istat & kportrbits)) {
- istat &= ~kportrbits;
- ipath_kreceive(dd->ipath_pd[0]);
- }
-
- if (istat & ((dd->ipath_i_rcvavail_mask << dd->ipath_i_rcvavail_shift) |
- (dd->ipath_i_rcvurg_mask << dd->ipath_i_rcvurg_shift)))
- handle_urcv(dd, istat);
-
- if (istat & (INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED))
- handle_sdma_intr(dd, istat);
-
- if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* always process; sdma verbs uses PIO for acks and VL15 */
- handle_layer_pioavail(dd);
- }
-
- ret = IRQ_HANDLED;
-
-bail:
- return ret;
-}
+++ /dev/null
-#ifndef _IPATH_KERNEL_H
-#define _IPATH_KERNEL_H
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This header file is the base header file for infinipath kernel code
- * ipath_user.h serves a similar purpose for user code.
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_common.h"
-#include "ipath_debug.h"
-#include "ipath_registers.h"
-
-/* only s/w major version of InfiniPath we can handle */
-#define IPATH_CHIP_VERS_MAJ 2U
-
-/* don't care about this except printing */
-#define IPATH_CHIP_VERS_MIN 0U
-
-/* temporary, maybe always */
-extern struct infinipath_stats ipath_stats;
-
-#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
-/*
- * First-cut critierion for "device is active" is
- * two thousand dwords combined Tx, Rx traffic per
- * 5-second interval. SMA packets are 64 dwords,
- * and occur "a few per second", presumably each way.
- */
-#define IPATH_TRAFFIC_ACTIVE_THRESHOLD (2000)
-/*
- * Struct used to indicate which errors are logged in each of the
- * error-counters that are logged to EEPROM. A counter is incremented
- * _once_ (saturating at 255) for each event with any bits set in
- * the error or hwerror register masks below.
- */
-#define IPATH_EEP_LOG_CNT (4)
-struct ipath_eep_log_mask {
- u64 errs_to_log;
- u64 hwerrs_to_log;
-};
-
-struct ipath_portdata {
- void **port_rcvegrbuf;
- dma_addr_t *port_rcvegrbuf_phys;
- /* rcvhdrq base, needs mmap before useful */
- void *port_rcvhdrq;
- /* kernel virtual address where hdrqtail is updated */
- void *port_rcvhdrtail_kvaddr;
- /*
- * temp buffer for expected send setup, allocated at open, instead
- * of each setup call
- */
- void *port_tid_pg_list;
- /* when waiting for rcv or pioavail */
- wait_queue_head_t port_wait;
- /*
- * rcvegr bufs base, physical, must fit
- * in 44 bits so 32 bit programs mmap64 44 bit works)
- */
- dma_addr_t port_rcvegr_phys;
- /* mmap of hdrq, must fit in 44 bits */
- dma_addr_t port_rcvhdrq_phys;
- dma_addr_t port_rcvhdrqtailaddr_phys;
- /*
- * number of opens (including slave subports) on this instance
- * (ignoring forks, dup, etc. for now)
- */
- int port_cnt;
- /*
- * how much space to leave at start of eager TID entries for
- * protocol use, on each TID
- */
- /* instead of calculating it */
- unsigned port_port;
- /* non-zero if port is being shared. */
- u16 port_subport_cnt;
- /* non-zero if port is being shared. */
- u16 port_subport_id;
- /* number of pio bufs for this port (all procs, if shared) */
- u32 port_piocnt;
- /* first pio buffer for this port */
- u32 port_pio_base;
- /* chip offset of PIO buffers for this port */
- u32 port_piobufs;
- /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
- u32 port_rcvegrbuf_chunks;
- /* how many egrbufs per chunk */
- u32 port_rcvegrbufs_perchunk;
- /* order for port_rcvegrbuf_pages */
- size_t port_rcvegrbuf_size;
- /* rcvhdrq size (for freeing) */
- size_t port_rcvhdrq_size;
- /* next expected TID to check when looking for free */
- u32 port_tidcursor;
- /* next expected TID to check */
- unsigned long port_flag;
- /* what happened */
- unsigned long int_flag;
- /* WAIT_RCV that timed out, no interrupt */
- u32 port_rcvwait_to;
- /* WAIT_PIO that timed out, no interrupt */
- u32 port_piowait_to;
- /* WAIT_RCV already happened, no wait */
- u32 port_rcvnowait;
- /* WAIT_PIO already happened, no wait */
- u32 port_pionowait;
- /* total number of rcvhdrqfull errors */
- u32 port_hdrqfull;
- /*
- * Used to suppress multiple instances of same
- * port staying stuck at same point.
- */
- u32 port_lastrcvhdrqtail;
- /* saved total number of rcvhdrqfull errors for poll edge trigger */
- u32 port_hdrqfull_poll;
- /* total number of polled urgent packets */
- u32 port_urgent;
- /* saved total number of polled urgent packets for poll edge trigger */
- u32 port_urgent_poll;
- /* pid of process using this port */
- struct pid *port_pid;
- struct pid *port_subpid[INFINIPATH_MAX_SUBPORT];
- /* same size as task_struct .comm[] */
- char port_comm[16];
- /* pkeys set by this use of this port */
- u16 port_pkeys[4];
- /* so file ops can get at unit */
- struct ipath_devdata *port_dd;
- /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
- void *subport_uregbase;
- /* An array of pages for the eager receive buffers * N */
- void *subport_rcvegrbuf;
- /* An array of pages for the eager header queue entries * N */
- void *subport_rcvhdr_base;
- /* The version of the library which opened this port */
- u32 userversion;
- /* Bitmask of active slaves */
- u32 active_slaves;
- /* Type of packets or conditions we want to poll for */
- u16 poll_type;
- /* port rcvhdrq head offset */
- u32 port_head;
- /* receive packet sequence counter */
- u32 port_seq_cnt;
-};
-
-struct sk_buff;
-struct ipath_sge_state;
-struct ipath_verbs_txreq;
-
-/*
- * control information for layered drivers
- */
-struct _ipath_layer {
- void *l_arg;
-};
-
-struct ipath_skbinfo {
- struct sk_buff *skb;
- dma_addr_t phys;
-};
-
-struct ipath_sdma_txreq {
- int flags;
- int sg_count;
- union {
- struct scatterlist *sg;
- void *map_addr;
- };
- void (*callback)(void *, int);
- void *callback_cookie;
- int callback_status;
- u16 start_idx; /* sdma private */
- u16 next_descq_idx; /* sdma private */
- struct list_head list; /* sdma private */
-};
-
-struct ipath_sdma_desc {
- __le64 qw[2];
-};
-
-#define IPATH_SDMA_TXREQ_F_USELARGEBUF 0x1
-#define IPATH_SDMA_TXREQ_F_HEADTOHOST 0x2
-#define IPATH_SDMA_TXREQ_F_INTREQ 0x4
-#define IPATH_SDMA_TXREQ_F_FREEBUF 0x8
-#define IPATH_SDMA_TXREQ_F_FREEDESC 0x10
-#define IPATH_SDMA_TXREQ_F_VL15 0x20
-
-#define IPATH_SDMA_TXREQ_S_OK 0
-#define IPATH_SDMA_TXREQ_S_SENDERROR 1
-#define IPATH_SDMA_TXREQ_S_ABORTED 2
-#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
-
-#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
-#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
-#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
-#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
-
-/* max dwords in small buffer packet */
-#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
-
-/*
- * Possible IB config parameters for ipath_f_get/set_ib_cfg()
- */
-#define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
-#define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
-#define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
-#define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
-#define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
-#define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
-#define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
-#define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
-#define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
-#define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
-#define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
-
-
-struct ipath_devdata {
- struct list_head ipath_list;
-
- struct ipath_kregs const *ipath_kregs;
- struct ipath_cregs const *ipath_cregs;
-
- /* mem-mapped pointer to base of chip regs */
- u64 __iomem *ipath_kregbase;
- /* end of mem-mapped chip space; range checking */
- u64 __iomem *ipath_kregend;
- /* physical address of chip for io_remap, etc. */
- unsigned long ipath_physaddr;
- /* base of memory alloced for ipath_kregbase, for free */
- u64 *ipath_kregalloc;
- /* ipath_cfgports pointers */
- struct ipath_portdata **ipath_pd;
- /* sk_buffs used by port 0 eager receive queue */
- struct ipath_skbinfo *ipath_port0_skbinfo;
- /* kvirt address of 1st 2k pio buffer */
- void __iomem *ipath_pio2kbase;
- /* kvirt address of 1st 4k pio buffer */
- void __iomem *ipath_pio4kbase;
- /*
- * points to area where PIOavail registers will be DMA'ed.
- * Has to be on a page of it's own, because the page will be
- * mapped into user program space. This copy is *ONLY* ever
- * written by DMA, not by the driver! Need a copy per device
- * when we get to multiple devices
- */
- volatile __le64 *ipath_pioavailregs_dma;
- /* physical address where updates occur */
- dma_addr_t ipath_pioavailregs_phys;
- struct _ipath_layer ipath_layer;
- /* setup intr */
- int (*ipath_f_intrsetup)(struct ipath_devdata *);
- /* fallback to alternate interrupt type if possible */
- int (*ipath_f_intr_fallback)(struct ipath_devdata *);
- /* setup on-chip bus config */
- int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
- /* hard reset chip */
- int (*ipath_f_reset)(struct ipath_devdata *);
- int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
- size_t);
- void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
- void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
- size_t);
- void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
- int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
- int (*ipath_f_early_init)(struct ipath_devdata *);
- void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
- void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
- u32, unsigned long);
- void (*ipath_f_tidtemplate)(struct ipath_devdata *);
- void (*ipath_f_cleanup)(struct ipath_devdata *);
- void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
- /* fill out chip-specific fields */
- int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
- /* free irq */
- void (*ipath_f_free_irq)(struct ipath_devdata *);
- struct ipath_message_header *(*ipath_f_get_msgheader)
- (struct ipath_devdata *, __le32 *);
- void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
- int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int);
- int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32);
- void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16);
- void (*ipath_f_read_counters)(struct ipath_devdata *,
- struct infinipath_counters *);
- void (*ipath_f_xgxs_reset)(struct ipath_devdata *);
- /* per chip actions needed for IB Link up/down changes */
- int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
-
- unsigned ipath_lastegr_idx;
- struct ipath_ibdev *verbs_dev;
- struct timer_list verbs_timer;
- /* total dwords sent (summed from counter) */
- u64 ipath_sword;
- /* total dwords rcvd (summed from counter) */
- u64 ipath_rword;
- /* total packets sent (summed from counter) */
- u64 ipath_spkts;
- /* total packets rcvd (summed from counter) */
- u64 ipath_rpkts;
- /* ipath_statusp initially points to this. */
- u64 _ipath_status;
- /* GUID for this interface, in network order */
- __be64 ipath_guid;
- /*
- * aggregrate of error bits reported since last cleared, for
- * limiting of error reporting
- */
- ipath_err_t ipath_lasterror;
- /*
- * aggregrate of error bits reported since last cleared, for
- * limiting of hwerror reporting
- */
- ipath_err_t ipath_lasthwerror;
- /* errors masked because they occur too fast */
- ipath_err_t ipath_maskederrs;
- u64 ipath_lastlinkrecov; /* link recoveries at last ACTIVE */
- /* these 5 fields are used to establish deltas for IB Symbol
- * errors and linkrecovery errors. They can be reported on
- * some chips during link negotiation prior to INIT, and with
- * DDR when faking DDR negotiations with non-IBTA switches.
- * The chip counters are adjusted at driver unload if there is
- * a non-zero delta.
- */
- u64 ibdeltainprog;
- u64 ibsymdelta;
- u64 ibsymsnap;
- u64 iblnkerrdelta;
- u64 iblnkerrsnap;
-
- /* time in jiffies at which to re-enable maskederrs */
- unsigned long ipath_unmasktime;
- /* count of egrfull errors, combined for all ports */
- u64 ipath_last_tidfull;
- /* for ipath_qcheck() */
- u64 ipath_lastport0rcv_cnt;
- /* template for writing TIDs */
- u64 ipath_tidtemplate;
- /* value to write to free TIDs */
- u64 ipath_tidinvalid;
- /* IBA6120 rcv interrupt setup */
- u64 ipath_rhdrhead_intr_off;
-
- /* size of memory at ipath_kregbase */
- u32 ipath_kregsize;
- /* number of registers used for pioavail */
- u32 ipath_pioavregs;
- /* IPATH_POLL, etc. */
- u32 ipath_flags;
- /* ipath_flags driver is waiting for */
- u32 ipath_state_wanted;
- /* last buffer for user use, first buf for kernel use is this
- * index. */
- u32 ipath_lastport_piobuf;
- /* is a stats timer active */
- u32 ipath_stats_timer_active;
- /* number of interrupts for this device -- saturates... */
- u32 ipath_int_counter;
- /* dwords sent read from counter */
- u32 ipath_lastsword;
- /* dwords received read from counter */
- u32 ipath_lastrword;
- /* sent packets read from counter */
- u32 ipath_lastspkts;
- /* received packets read from counter */
- u32 ipath_lastrpkts;
- /* pio bufs allocated per port */
- u32 ipath_pbufsport;
- /* if remainder on bufs/port, ports < extrabuf get 1 extra */
- u32 ipath_ports_extrabuf;
- u32 ipath_pioupd_thresh; /* update threshold, some chips */
- /*
- * number of ports configured as max; zero is set to number chip
- * supports, less gives more pio bufs/port, etc.
- */
- u32 ipath_cfgports;
- /* count of port 0 hdrqfull errors */
- u32 ipath_p0_hdrqfull;
- /* port 0 number of receive eager buffers */
- u32 ipath_p0_rcvegrcnt;
-
- /*
- * index of last piobuffer we used. Speeds up searching, by
- * starting at this point. Doesn't matter if multiple cpu's use and
- * update, last updater is only write that matters. Whenever it
- * wraps, we update shadow copies. Need a copy per device when we
- * get to multiple devices
- */
- u32 ipath_lastpioindex;
- u32 ipath_lastpioindexl;
- /* max length of freezemsg */
- u32 ipath_freezelen;
- /*
- * consecutive times we wanted a PIO buffer but were unable to
- * get one
- */
- u32 ipath_consec_nopiobuf;
- /*
- * hint that we should update ipath_pioavailshadow before
- * looking for a PIO buffer
- */
- u32 ipath_upd_pio_shadow;
- /* so we can rewrite it after a chip reset */
- u32 ipath_pcibar0;
- /* so we can rewrite it after a chip reset */
- u32 ipath_pcibar1;
- u32 ipath_x1_fix_tries;
- u32 ipath_autoneg_tries;
- u32 serdes_first_init_done;
-
- struct ipath_relock {
- atomic_t ipath_relock_timer_active;
- struct timer_list ipath_relock_timer;
- unsigned int ipath_relock_interval; /* in jiffies */
- } ipath_relock_singleton;
-
- /* interrupt number */
- int ipath_irq;
- /* HT/PCI Vendor ID (here for NodeInfo) */
- u16 ipath_vendorid;
- /* HT/PCI Device ID (here for NodeInfo) */
- u16 ipath_deviceid;
- /* offset in HT config space of slave/primary interface block */
- u8 ipath_ht_slave_off;
- /* for write combining settings */
- int wc_cookie;
- /* ref count for each pkey */
- atomic_t ipath_pkeyrefs[4];
- /* shadow copy of struct page *'s for exp tid pages */
- struct page **ipath_pageshadow;
- /* shadow copy of dma handles for exp tid pages */
- dma_addr_t *ipath_physshadow;
- u64 __iomem *ipath_egrtidbase;
- /* lock to workaround chip bug 9437 and others */
- spinlock_t ipath_kernel_tid_lock;
- spinlock_t ipath_user_tid_lock;
- spinlock_t ipath_sendctrl_lock;
- /* around ipath_pd and (user ports) port_cnt use (intr vs free) */
- spinlock_t ipath_uctxt_lock;
-
- /*
- * IPATH_STATUS_*,
- * this address is mapped readonly into user processes so they can
- * get status cheaply, whenever they want.
- */
- u64 *ipath_statusp;
- /* freeze msg if hw error put chip in freeze */
- char *ipath_freezemsg;
- /* pci access data structure */
- struct pci_dev *pcidev;
- struct cdev *user_cdev;
- struct cdev *diag_cdev;
- struct device *user_dev;
- struct device *diag_dev;
- /* timer used to prevent stats overflow, error throttling, etc. */
- struct timer_list ipath_stats_timer;
- /* timer to verify interrupts work, and fallback if possible */
- struct timer_list ipath_intrchk_timer;
- void *ipath_dummy_hdrq; /* used after port close */
- dma_addr_t ipath_dummy_hdrq_phys;
-
- /* SendDMA related entries */
- spinlock_t ipath_sdma_lock;
- unsigned long ipath_sdma_status;
- unsigned long ipath_sdma_abort_jiffies;
- unsigned long ipath_sdma_abort_intr_timeout;
- unsigned long ipath_sdma_buf_jiffies;
- struct ipath_sdma_desc *ipath_sdma_descq;
- u64 ipath_sdma_descq_added;
- u64 ipath_sdma_descq_removed;
- int ipath_sdma_desc_nreserved;
- u16 ipath_sdma_descq_cnt;
- u16 ipath_sdma_descq_tail;
- u16 ipath_sdma_descq_head;
- u16 ipath_sdma_next_intr;
- u16 ipath_sdma_reset_wait;
- u8 ipath_sdma_generation;
- struct tasklet_struct ipath_sdma_abort_task;
- struct tasklet_struct ipath_sdma_notify_task;
- struct list_head ipath_sdma_activelist;
- struct list_head ipath_sdma_notifylist;
- atomic_t ipath_sdma_vl15_count;
- struct timer_list ipath_sdma_vl15_timer;
-
- dma_addr_t ipath_sdma_descq_phys;
- volatile __le64 *ipath_sdma_head_dma;
- dma_addr_t ipath_sdma_head_phys;
-
- unsigned long ipath_ureg_align; /* user register alignment */
-
- struct delayed_work ipath_autoneg_work;
- wait_queue_head_t ipath_autoneg_wait;
-
- /* HoL blocking / user app forward-progress state */
- unsigned ipath_hol_state;
- unsigned ipath_hol_next;
- struct timer_list ipath_hol_timer;
-
- /*
- * Shadow copies of registers; size indicates read access size.
- * Most of them are readonly, but some are write-only register,
- * where we manipulate the bits in the shadow copy, and then write
- * the shadow copy to infinipath.
- *
- * We deliberately make most of these 32 bits, since they have
- * restricted range. For any that we read, we won't to generate 32
- * bit accesses, since Opteron will generate 2 separate 32 bit HT
- * transactions for a 64 bit read, and we want to avoid unnecessary
- * HT transactions.
- */
-
- /* This is the 64 bit group */
-
- /*
- * shadow of pioavail, check to be sure it's large enough at
- * init time.
- */
- unsigned long ipath_pioavailshadow[8];
- /* bitmap of send buffers available for the kernel to use with PIO. */
- unsigned long ipath_pioavailkernel[8];
- /* shadow of kr_gpio_out, for rmw ops */
- u64 ipath_gpio_out;
- /* shadow the gpio mask register */
- u64 ipath_gpio_mask;
- /* shadow the gpio output enable, etc... */
- u64 ipath_extctrl;
- /* kr_revision shadow */
- u64 ipath_revision;
- /*
- * shadow of ibcctrl, for interrupt handling of link changes,
- * etc.
- */
- u64 ipath_ibcctrl;
- /*
- * last ibcstatus, to suppress "duplicate" status change messages,
- * mostly from 2 to 3
- */
- u64 ipath_lastibcstat;
- /* hwerrmask shadow */
- ipath_err_t ipath_hwerrmask;
- ipath_err_t ipath_errormask; /* errormask shadow */
- /* interrupt config reg shadow */
- u64 ipath_intconfig;
- /* kr_sendpiobufbase value */
- u64 ipath_piobufbase;
- /* kr_ibcddrctrl shadow */
- u64 ipath_ibcddrctrl;
-
- /* these are the "32 bit" regs */
-
- /*
- * number of GUIDs in the flash for this interface; may need some
- * rethinking for setting on other ifaces
- */
- u32 ipath_nguid;
- /*
- * the following two are 32-bit bitmasks, but {test,clear,set}_bit
- * all expect bit fields to be "unsigned long"
- */
- /* shadow kr_rcvctrl */
- unsigned long ipath_rcvctrl;
- /* shadow kr_sendctrl */
- unsigned long ipath_sendctrl;
- /* to not count armlaunch after cancel */
- unsigned long ipath_lastcancel;
- /* count cases where special trigger was needed (double write) */
- unsigned long ipath_spectriggerhit;
-
- /* value we put in kr_rcvhdrcnt */
- u32 ipath_rcvhdrcnt;
- /* value we put in kr_rcvhdrsize */
- u32 ipath_rcvhdrsize;
- /* value we put in kr_rcvhdrentsize */
- u32 ipath_rcvhdrentsize;
- /* offset of last entry in rcvhdrq */
- u32 ipath_hdrqlast;
- /* kr_portcnt value */
- u32 ipath_portcnt;
- /* kr_pagealign value */
- u32 ipath_palign;
- /* number of "2KB" PIO buffers */
- u32 ipath_piobcnt2k;
- /* size in bytes of "2KB" PIO buffers */
- u32 ipath_piosize2k;
- /* number of "4KB" PIO buffers */
- u32 ipath_piobcnt4k;
- /* size in bytes of "4KB" PIO buffers */
- u32 ipath_piosize4k;
- u32 ipath_pioreserved; /* reserved special-inkernel; */
- /* kr_rcvegrbase value */
- u32 ipath_rcvegrbase;
- /* kr_rcvegrcnt value */
- u32 ipath_rcvegrcnt;
- /* kr_rcvtidbase value */
- u32 ipath_rcvtidbase;
- /* kr_rcvtidcnt value */
- u32 ipath_rcvtidcnt;
- /* kr_sendregbase */
- u32 ipath_sregbase;
- /* kr_userregbase */
- u32 ipath_uregbase;
- /* kr_counterregbase */
- u32 ipath_cregbase;
- /* shadow the control register contents */
- u32 ipath_control;
- /* PCI revision register (HTC rev on FPGA) */
- u32 ipath_pcirev;
-
- /* chip address space used by 4k pio buffers */
- u32 ipath_4kalign;
- /* The MTU programmed for this unit */
- u32 ipath_ibmtu;
- /*
- * The max size IB packet, included IB headers that we can send.
- * Starts same as ipath_piosize, but is affected when ibmtu is
- * changed, or by size of eager buffers
- */
- u32 ipath_ibmaxlen;
- /*
- * ibmaxlen at init time, limited by chip and by receive buffer
- * size. Not changed after init.
- */
- u32 ipath_init_ibmaxlen;
- /* size of each rcvegrbuffer */
- u32 ipath_rcvegrbufsize;
- /* localbus width (1, 2,4,8,16,32) from config space */
- u32 ipath_lbus_width;
- /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
- u32 ipath_lbus_speed;
- /*
- * number of sequential ibcstatus change for polling active/quiet
- * (i.e., link not coming up).
- */
- u32 ipath_ibpollcnt;
- /* low and high portions of MSI capability/vector */
- u32 ipath_msi_lo;
- /* saved after PCIe init for restore after reset */
- u32 ipath_msi_hi;
- /* MSI data (vector) saved for restore */
- u16 ipath_msi_data;
- /* MLID programmed for this instance */
- u16 ipath_mlid;
- /* LID programmed for this instance */
- u16 ipath_lid;
- /* list of pkeys programmed; 0 if not set */
- u16 ipath_pkeys[4];
- /*
- * ASCII serial number, from flash, large enough for original
- * all digit strings, and longer QLogic serial number format
- */
- u8 ipath_serial[16];
- /* human readable board version */
- u8 ipath_boardversion[96];
- u8 ipath_lbus_info[32]; /* human readable localbus info */
- /* chip major rev, from ipath_revision */
- u8 ipath_majrev;
- /* chip minor rev, from ipath_revision */
- u8 ipath_minrev;
- /* board rev, from ipath_revision */
- u8 ipath_boardrev;
- /* saved for restore after reset */
- u8 ipath_pci_cacheline;
- /* LID mask control */
- u8 ipath_lmc;
- /* link width supported */
- u8 ipath_link_width_supported;
- /* link speed supported */
- u8 ipath_link_speed_supported;
- u8 ipath_link_width_enabled;
- u8 ipath_link_speed_enabled;
- u8 ipath_link_width_active;
- u8 ipath_link_speed_active;
- /* Rx Polarity inversion (compensate for ~tx on partner) */
- u8 ipath_rx_pol_inv;
-
- u8 ipath_r_portenable_shift;
- u8 ipath_r_intravail_shift;
- u8 ipath_r_tailupd_shift;
- u8 ipath_r_portcfg_shift;
-
- /* unit # of this chip, if present */
- int ipath_unit;
-
- /* local link integrity counter */
- u32 ipath_lli_counter;
- /* local link integrity errors */
- u32 ipath_lli_errors;
- /*
- * Above counts only cases where _successive_ LocalLinkIntegrity
- * errors were seen in the receive headers of kern-packets.
- * Below are the three (monotonically increasing) counters
- * maintained via GPIO interrupts on iba6120-rev2.
- */
- u32 ipath_rxfc_unsupvl_errs;
- u32 ipath_overrun_thresh_errs;
- u32 ipath_lli_errs;
-
- /*
- * Not all devices managed by a driver instance are the same
- * type, so these fields must be per-device.
- */
- u64 ipath_i_bitsextant;
- ipath_err_t ipath_e_bitsextant;
- ipath_err_t ipath_hwe_bitsextant;
-
- /*
- * Below should be computable from number of ports,
- * since they are never modified.
- */
- u64 ipath_i_rcvavail_mask;
- u64 ipath_i_rcvurg_mask;
- u16 ipath_i_rcvurg_shift;
- u16 ipath_i_rcvavail_shift;
-
- /*
- * Register bits for selecting i2c direction and values, used for
- * I2C serial flash.
- */
- u8 ipath_gpio_sda_num;
- u8 ipath_gpio_scl_num;
- u8 ipath_i2c_chain_type;
- u64 ipath_gpio_sda;
- u64 ipath_gpio_scl;
-
- /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
- spinlock_t ipath_gpio_lock;
-
- /*
- * IB link and linktraining states and masks that vary per chip in
- * some way. Set at init, to avoid each IB status change interrupt
- */
- u8 ibcs_ls_shift;
- u8 ibcs_lts_mask;
- u32 ibcs_mask;
- u32 ib_init;
- u32 ib_arm;
- u32 ib_active;
-
- u16 ipath_rhf_offset; /* offset of RHF within receive header entry */
-
- /*
- * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
- * reg. Changes for IBA7220
- */
- u8 ibcc_lic_mask; /* LinkInitCmd */
- u8 ibcc_lc_shift; /* LinkCmd */
- u8 ibcc_mpl_shift; /* Maxpktlen */
-
- u8 delay_mult;
-
- /* used to override LED behavior */
- u8 ipath_led_override; /* Substituted for normal value, if non-zero */
- u16 ipath_led_override_timeoff; /* delta to next timer event */
- u8 ipath_led_override_vals[2]; /* Alternates per blink-frame */
- u8 ipath_led_override_phase; /* Just counts, LSB picks from vals[] */
- atomic_t ipath_led_override_timer_active;
- /* Used to flash LEDs in override mode */
- struct timer_list ipath_led_override_timer;
-
- /* Support (including locks) for EEPROM logging of errors and time */
- /* control access to actual counters, timer */
- spinlock_t ipath_eep_st_lock;
- /* control high-level access to EEPROM */
- struct mutex ipath_eep_lock;
- /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */
- uint64_t ipath_traffic_wds;
- /* active time is kept in seconds, but logged in hours */
- atomic_t ipath_active_time;
- /* Below are nominal shadow of EEPROM, new since last EEPROM update */
- uint8_t ipath_eep_st_errs[IPATH_EEP_LOG_CNT];
- uint8_t ipath_eep_st_new_errs[IPATH_EEP_LOG_CNT];
- uint16_t ipath_eep_hrs;
- /*
- * masks for which bits of errs, hwerrs that cause
- * each of the counters to increment.
- */
- struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT];
-
- /* interrupt mitigation reload register info */
- u16 ipath_jint_idle_ticks; /* idle clock ticks */
- u16 ipath_jint_max_packets; /* max packets across all ports */
-
- /*
- * lock for access to SerDes, and flags to sequence preset
- * versus steady-state. 7220-only at the moment.
- */
- spinlock_t ipath_sdepb_lock;
- u8 ipath_presets_needed; /* Set if presets to be restored next DOWN */
-};
-
-/* ipath_hol_state values (stopping/starting user proc, send flushing) */
-#define IPATH_HOL_UP 0
-#define IPATH_HOL_DOWN 1
-/* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
-#define IPATH_HOL_DOWNSTOP 0
-#define IPATH_HOL_DOWNCONT 1
-
-/* bit positions for sdma_status */
-#define IPATH_SDMA_ABORTING 0
-#define IPATH_SDMA_DISARMED 1
-#define IPATH_SDMA_DISABLED 2
-#define IPATH_SDMA_LAYERBUF 3
-#define IPATH_SDMA_RUNNING 30
-#define IPATH_SDMA_SHUTDOWN 31
-
-/* bit combinations that correspond to abort states */
-#define IPATH_SDMA_ABORT_NONE 0
-#define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
-#define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED))
-#define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISABLED))
-#define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
-#define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
- (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
-
-#define IPATH_SDMA_BUF_NONE 0
-#define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
-
-/* Private data for file operations */
-struct ipath_filedata {
- struct ipath_portdata *pd;
- unsigned subport;
- unsigned tidcursor;
- struct ipath_user_sdma_queue *pq;
-};
-extern struct list_head ipath_dev_list;
-extern spinlock_t ipath_devs_lock;
-extern struct ipath_devdata *ipath_lookup(int unit);
-
-int ipath_init_chip(struct ipath_devdata *, int);
-int ipath_enable_wc(struct ipath_devdata *dd);
-void ipath_disable_wc(struct ipath_devdata *dd);
-int ipath_count_units(int *npresentp, int *nupp, int *maxportsp);
-void ipath_shutdown_device(struct ipath_devdata *);
-void ipath_clear_freeze(struct ipath_devdata *);
-
-struct file_operations;
-int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
- struct cdev **cdevp, struct device **devp);
-void ipath_cdev_cleanup(struct cdev **cdevp,
- struct device **devp);
-
-int ipath_diag_add(struct ipath_devdata *);
-void ipath_diag_remove(struct ipath_devdata *);
-
-extern wait_queue_head_t ipath_state_wait;
-
-int ipath_user_add(struct ipath_devdata *dd);
-void ipath_user_remove(struct ipath_devdata *dd);
-
-struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
-
-extern int ipath_diag_inuse;
-
-irqreturn_t ipath_intr(int irq, void *devid);
-int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
- ipath_err_t err);
-#if __IPATH_INFO || __IPATH_DBG
-extern const char *ipath_ibcstatus_str[];
-#endif
-
-/* clean up any per-chip chip-specific stuff */
-void ipath_chip_cleanup(struct ipath_devdata *);
-/* clean up any chip type-specific stuff */
-void ipath_chip_done(void);
-
-void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
- unsigned cnt);
-void ipath_cancel_sends(struct ipath_devdata *, int);
-
-int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
-void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
-
-int ipath_parse_ushort(const char *str, unsigned short *valp);
-
-void ipath_kreceive(struct ipath_portdata *);
-int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
-int ipath_reset_device(int);
-void ipath_get_faststats(unsigned long);
-int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
-int ipath_set_linkstate(struct ipath_devdata *, u8);
-int ipath_set_mtu(struct ipath_devdata *, u16);
-int ipath_set_lid(struct ipath_devdata *, u32, u8);
-int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
-void ipath_enable_armlaunch(struct ipath_devdata *);
-void ipath_disable_armlaunch(struct ipath_devdata *);
-void ipath_hol_down(struct ipath_devdata *);
-void ipath_hol_up(struct ipath_devdata *);
-void ipath_hol_event(unsigned long);
-void ipath_toggle_rclkrls(struct ipath_devdata *);
-void ipath_sd7220_clr_ibpar(struct ipath_devdata *);
-void ipath_set_relock_poll(struct ipath_devdata *, int);
-void ipath_shutdown_relock_poll(struct ipath_devdata *);
-
-/* for use in system calls, where we want to know device type, etc. */
-#define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
-#define subport_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->subport
-#define tidcursor_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->tidcursor
-#define user_sdma_queue_fp(fp) \
- ((struct ipath_filedata *)(fp)->private_data)->pq
-
-/*
- * values for ipath_flags
- */
- /* chip can report link latency (IB 1.2) */
-#define IPATH_HAS_LINK_LATENCY 0x1
- /* The chip is up and initted */
-#define IPATH_INITTED 0x2
- /* set if any user code has set kr_rcvhdrsize */
-#define IPATH_RCVHDRSZ_SET 0x4
- /* The chip is present and valid for accesses */
-#define IPATH_PRESENT 0x8
- /* HT link0 is only 8 bits wide, ignore upper byte crc
- * errors, etc. */
-#define IPATH_8BIT_IN_HT0 0x10
- /* HT link1 is only 8 bits wide, ignore upper byte crc
- * errors, etc. */
-#define IPATH_8BIT_IN_HT1 0x20
- /* The link is down */
-#define IPATH_LINKDOWN 0x40
- /* The link level is up (0x11) */
-#define IPATH_LINKINIT 0x80
- /* The link is in the armed (0x21) state */
-#define IPATH_LINKARMED 0x100
- /* The link is in the active (0x31) state */
-#define IPATH_LINKACTIVE 0x200
- /* link current state is unknown */
-#define IPATH_LINKUNK 0x400
- /* Write combining flush needed for PIO */
-#define IPATH_PIO_FLUSH_WC 0x1000
- /* DMA Receive tail pointer */
-#define IPATH_NODMA_RTAIL 0x2000
- /* no IB cable, or no device on IB cable */
-#define IPATH_NOCABLE 0x4000
- /* Supports port zero per packet receive interrupts via
- * GPIO */
-#define IPATH_GPIO_INTR 0x8000
- /* uses the coded 4byte TID, not 8 byte */
-#define IPATH_4BYTE_TID 0x10000
- /* packet/word counters are 32 bit, else those 4 counters
- * are 64bit */
-#define IPATH_32BITCOUNTERS 0x20000
- /* Interrupt register is 64 bits */
-#define IPATH_INTREG_64 0x40000
- /* can miss port0 rx interrupts */
-#define IPATH_DISABLED 0x80000 /* administratively disabled */
- /* Use GPIO interrupts for new counters */
-#define IPATH_GPIO_ERRINTRS 0x100000
-#define IPATH_SWAP_PIOBUFS 0x200000
- /* Supports Send DMA */
-#define IPATH_HAS_SEND_DMA 0x400000
- /* Supports Send Count (not just word count) in PBC */
-#define IPATH_HAS_PBC_CNT 0x800000
- /* Suppress heartbeat, even if turning off loopback */
-#define IPATH_NO_HRTBT 0x1000000
-#define IPATH_HAS_THRESH_UPDATE 0x4000000
-#define IPATH_HAS_MULT_IB_SPEED 0x8000000
-#define IPATH_IB_AUTONEG_INPROG 0x10000000
-#define IPATH_IB_AUTONEG_FAILED 0x20000000
- /* Linkdown-disable intentionally, Do not attempt to bring up */
-#define IPATH_IB_LINK_DISABLED 0x40000000
-#define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
-
-/* Bits in GPIO for the added interrupts */
-#define IPATH_GPIO_PORT0_BIT 2
-#define IPATH_GPIO_RXUVL_BIT 3
-#define IPATH_GPIO_OVRUN_BIT 4
-#define IPATH_GPIO_LLI_BIT 5
-#define IPATH_GPIO_ERRINTR_MASK 0x38
-
-/* portdata flag bit offsets */
- /* waiting for a packet to arrive */
-#define IPATH_PORT_WAITING_RCV 2
- /* master has not finished initializing */
-#define IPATH_PORT_MASTER_UNINIT 4
- /* waiting for an urgent packet to arrive */
-#define IPATH_PORT_WAITING_URG 5
-
-/* free up any allocated data at closes */
-void ipath_free_data(struct ipath_portdata *dd);
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
-void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
- unsigned len, int avail);
-void ipath_init_iba6110_funcs(struct ipath_devdata *);
-void ipath_get_eeprom_info(struct ipath_devdata *);
-int ipath_update_eeprom_log(struct ipath_devdata *dd);
-void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
-u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
-void ipath_disarm_senderrbufs(struct ipath_devdata *);
-void ipath_force_pio_avail_update(struct ipath_devdata *);
-void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
-
-/*
- * Set LED override, only the two LSBs have "public" meaning, but
- * any non-zero value substitutes them for the Link and LinkTrain
- * LED states.
- */
-#define IPATH_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
-#define IPATH_LED_LOG 2 /* Logical (link) YELLOW LED */
-void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
-
-/* send dma routines */
-int setup_sdma(struct ipath_devdata *);
-void teardown_sdma(struct ipath_devdata *);
-void ipath_restart_sdma(struct ipath_devdata *);
-void ipath_sdma_intr(struct ipath_devdata *);
-int ipath_sdma_verbs_send(struct ipath_devdata *, struct ipath_sge_state *,
- u32, struct ipath_verbs_txreq *);
-/* ipath_sdma_lock should be locked before calling this. */
-int ipath_sdma_make_progress(struct ipath_devdata *dd);
-
-/* must be called under ipath_sdma_lock */
-static inline u16 ipath_sdma_descq_freecnt(const struct ipath_devdata *dd)
-{
- return dd->ipath_sdma_descq_cnt -
- (dd->ipath_sdma_descq_added - dd->ipath_sdma_descq_removed) -
- 1 - dd->ipath_sdma_desc_nreserved;
-}
-
-static inline void ipath_sdma_desc_reserve(struct ipath_devdata *dd, u16 cnt)
-{
- dd->ipath_sdma_desc_nreserved += cnt;
-}
-
-static inline void ipath_sdma_desc_unreserve(struct ipath_devdata *dd, u16 cnt)
-{
- dd->ipath_sdma_desc_nreserved -= cnt;
-}
-
-/*
- * number of words used for protocol header if not set by ipath_userinit();
- */
-#define IPATH_DFLT_RCVHDRSIZE 9
-
-int ipath_get_user_pages(unsigned long, size_t, struct page **);
-void ipath_release_user_pages(struct page **, size_t);
-void ipath_release_user_pages_on_close(struct page **, size_t);
-int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
-int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
-int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
-int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
-
-/* these are used for the registers that vary with port */
-void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
- unsigned, u64);
-
-/*
- * We could have a single register get/put routine, that takes a group type,
- * but this is somewhat clearer and cleaner. It also gives us some error
- * checking. 64 bit register reads should always work, but are inefficient
- * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
- * so we use kreg32 wherever possible. User register and counter register
- * reads are always 32 bit reads, so only one form of those routines.
- */
-
-/*
- * At the moment, none of the s-registers are writable, so no
- * ipath_write_sreg().
- */
-
-/**
- * ipath_read_ureg32 - read 32-bit virtualized per-port register
- * @dd: device
- * @regno: register number
- * @port: port number
- *
- * Return the contents of a register that is virtualized to be per port.
- * Returns -1 on errors (not distinguishable from valid contents at
- * runtime; we may add a separate error variable at some point).
- */
-static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
- ipath_ureg regno, int port)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
-
- return readl(regno + (u64 __iomem *)
- (dd->ipath_uregbase +
- (char __iomem *)dd->ipath_kregbase +
- dd->ipath_ureg_align * port));
-}
-
-/**
- * ipath_write_ureg - write 32-bit virtualized per-port register
- * @dd: device
- * @regno: register number
- * @value: value
- * @port: port
- *
- * Write the contents of a register that is virtualized to be per port.
- */
-static inline void ipath_write_ureg(const struct ipath_devdata *dd,
- ipath_ureg regno, u64 value, int port)
-{
- u64 __iomem *ubase = (u64 __iomem *)
- (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
- dd->ipath_ureg_align * port);
- if (dd->ipath_kregbase)
- writeq(value, &ubase[regno]);
-}
-
-static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
- ipath_kreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return -1;
- return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
-}
-
-static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
- ipath_kreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return -1;
-
- return readq(&dd->ipath_kregbase[regno]);
-}
-
-static inline void ipath_write_kreg(const struct ipath_devdata *dd,
- ipath_kreg regno, u64 value)
-{
- if (dd->ipath_kregbase)
- writeq(value, &dd->ipath_kregbase[regno]);
-}
-
-static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
- ipath_sreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
-
- return readq(regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
- ipath_sreg regno)
-{
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
- return 0;
- return readl(regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline void ipath_write_creg(const struct ipath_devdata *dd,
- ipath_creg regno, u64 value)
-{
- if (dd->ipath_kregbase)
- writeq(value, regno + (u64 __iomem *)
- (dd->ipath_cregbase +
- (char __iomem *)dd->ipath_kregbase));
-}
-
-static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
-{
- *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
-}
-
-static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
-{
- return (u32) le64_to_cpu(*((volatile __le64 *)
- pd->port_rcvhdrtail_kvaddr));
-}
-
-static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
-{
- const struct ipath_devdata *dd = pd->port_dd;
- u32 hdrqtail;
-
- if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
- __le32 *rhf_addr;
- u32 seq;
-
- rhf_addr = (__le32 *) pd->port_rcvhdrq +
- pd->port_head + dd->ipath_rhf_offset;
- seq = ipath_hdrget_seq(rhf_addr);
- hdrqtail = pd->port_head;
- if (seq == pd->port_seq_cnt)
- hdrqtail++;
- } else
- hdrqtail = ipath_get_rcvhdrtail(pd);
-
- return hdrqtail;
-}
-
-static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
-{
- return (dd->ipath_flags & IPATH_INTREG_64) ?
- ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r);
-}
-
-/*
- * from contents of IBCStatus (or a saved copy), return linkstate
- * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
- * everywhere, anyway (and should be, for almost all purposes).
- */
-static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
-{
- u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
- if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER)
- state = INFINIPATH_IBCS_L_STATE_ACTIVE;
- return state;
-}
-
-/* from contents of IBCStatus (or a saved copy), return linktrainingstate */
-static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs)
-{
- return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- dd->ibcs_lts_mask;
-}
-
-/*
- * from contents of IBCStatus (or a saved copy), return logical link state
- * combination of link state and linktraining state (down, active, init,
- * arm, etc.
- */
-static inline u32 ipath_ib_state(struct ipath_devdata *dd, u64 ibcs)
-{
- u32 ibs;
- ibs = (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- dd->ibcs_lts_mask;
- ibs |= (u32)(ibcs &
- (INFINIPATH_IBCS_LINKSTATE_MASK << dd->ibcs_ls_shift));
- return ibs;
-}
-
-/*
- * sysfs interface.
- */
-
-struct device_driver;
-
-extern const char ib_ipath_version[];
-
-extern const struct attribute_group *ipath_driver_attr_groups[];
-
-int ipath_device_create_group(struct device *, struct ipath_devdata *);
-void ipath_device_remove_group(struct device *, struct ipath_devdata *);
-int ipath_expose_reset(struct device *);
-
-int ipath_init_ipathfs(void);
-void ipath_exit_ipathfs(void);
-int ipathfs_add_device(struct ipath_devdata *);
-int ipathfs_remove_device(struct ipath_devdata *);
-
-/*
- * dma_addr wrappers - all 0's invalid for hw
- */
-dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
- size_t, int);
-dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
-const char *ipath_get_unit_name(int unit);
-
-/*
- * Flush write combining store buffers (if present) and perform a write
- * barrier.
- */
-#if defined(CONFIG_X86_64)
-#define ipath_flush_wc() asm volatile("sfence" ::: "memory")
-#else
-#define ipath_flush_wc() wmb()
-#endif
-
-extern unsigned ipath_debug; /* debugging bit mask */
-extern unsigned ipath_linkrecovery;
-extern unsigned ipath_mtu4096;
-extern struct mutex ipath_mutex;
-
-#define IPATH_DRV_NAME "ib_ipath"
-#define IPATH_MAJOR 233
-#define IPATH_USER_MINOR_BASE 0
-#define IPATH_DIAGPKT_MINOR 127
-#define IPATH_DIAG_MINOR_BASE 129
-#define IPATH_NMINORS 255
-
-#define ipath_dev_err(dd,fmt,...) \
- do { \
- const struct ipath_devdata *__dd = (dd); \
- if (__dd->pcidev) \
- dev_err(&__dd->pcidev->dev, "%s: " fmt, \
- ipath_get_unit_name(__dd->ipath_unit), \
- ##__VA_ARGS__); \
- else \
- printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
- ipath_get_unit_name(__dd->ipath_unit), \
- ##__VA_ARGS__); \
- } while (0)
-
-#if _IPATH_DEBUGGING
-
-# define __IPATH_DBG_WHICH(which,fmt,...) \
- do { \
- if (unlikely(ipath_debug & (which))) \
- printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
- __func__,##__VA_ARGS__); \
- } while(0)
-
-# define ipath_dbg(fmt,...) \
- __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
-# define ipath_cdbg(which,fmt,...) \
- __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
-
-#else /* ! _IPATH_DEBUGGING */
-
-# define ipath_dbg(fmt,...)
-# define ipath_cdbg(which,fmt,...)
-
-#endif /* _IPATH_DEBUGGING */
-
-/*
- * this is used for formatting hw error messages...
- */
-struct ipath_hwerror_msgs {
- u64 mask;
- const char *msg;
-};
-
-#define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
-
-/* in ipath_intr.c... */
-void ipath_format_hwerrors(u64 hwerrs,
- const struct ipath_hwerror_msgs *hwerrmsgs,
- size_t nhwerrmsgs,
- char *msg, size_t lmsg);
-
-#endif /* _IPATH_KERNEL_H */
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <asm/io.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/**
- * ipath_alloc_lkey - allocate an lkey
- * @rkt: lkey table in which to allocate the lkey
- * @mr: memory region that this lkey protects
- *
- * Returns 1 if successful, otherwise returns 0.
- */
-
-int ipath_alloc_lkey(struct ipath_lkey_table *rkt, struct ipath_mregion *mr)
-{
- unsigned long flags;
- u32 r;
- u32 n;
- int ret;
-
- spin_lock_irqsave(&rkt->lock, flags);
-
- /* Find the next available LKEY */
- r = n = rkt->next;
- for (;;) {
- if (rkt->table[r] == NULL)
- break;
- r = (r + 1) & (rkt->max - 1);
- if (r == n) {
- spin_unlock_irqrestore(&rkt->lock, flags);
- ipath_dbg("LKEY table full\n");
- ret = 0;
- goto bail;
- }
- }
- rkt->next = (r + 1) & (rkt->max - 1);
- /*
- * Make sure lkey is never zero which is reserved to indicate an
- * unrestricted LKEY.
- */
- rkt->gen++;
- mr->lkey = (r << (32 - ib_ipath_lkey_table_size)) |
- ((((1 << (24 - ib_ipath_lkey_table_size)) - 1) & rkt->gen)
- << 8);
- if (mr->lkey == 0) {
- mr->lkey |= 1 << 8;
- rkt->gen++;
- }
- rkt->table[r] = mr;
- spin_unlock_irqrestore(&rkt->lock, flags);
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_free_lkey - free an lkey
- * @rkt: table from which to free the lkey
- * @lkey: lkey id to free
- */
-void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey)
-{
- unsigned long flags;
- u32 r;
-
- if (lkey == 0)
- return;
- r = lkey >> (32 - ib_ipath_lkey_table_size);
- spin_lock_irqsave(&rkt->lock, flags);
- rkt->table[r] = NULL;
- spin_unlock_irqrestore(&rkt->lock, flags);
-}
-
-/**
- * ipath_lkey_ok - check IB SGE for validity and initialize
- * @rkt: table containing lkey to check SGE against
- * @isge: outgoing internal SGE
- * @sge: SGE to check
- * @acc: access flags
- *
- * Return 1 if valid and successful, otherwise returns 0.
- *
- * Check the IB SGE for validity and initialize our internal version
- * of it.
- */
-int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
- struct ib_sge *sge, int acc)
-{
- struct ipath_lkey_table *rkt = &to_idev(qp->ibqp.device)->lk_table;
- struct ipath_mregion *mr;
- unsigned n, m;
- size_t off;
- int ret;
-
- /*
- * We use LKEY == zero for kernel virtual addresses
- * (see ipath_get_dma_mr and ipath_dma.c).
- */
- if (sge->lkey == 0) {
- /* always a kernel port, no locking needed */
- struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
-
- if (pd->user) {
- ret = 0;
- goto bail;
- }
- isge->mr = NULL;
- isge->vaddr = (void *) sge->addr;
- isge->length = sge->length;
- isge->sge_length = sge->length;
- ret = 1;
- goto bail;
- }
- mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
- if (unlikely(mr == NULL || mr->lkey != sge->lkey ||
- qp->ibqp.pd != mr->pd)) {
- ret = 0;
- goto bail;
- }
-
- off = sge->addr - mr->user_base;
- if (unlikely(sge->addr < mr->user_base ||
- off + sge->length > mr->length ||
- (mr->access_flags & acc) != acc)) {
- ret = 0;
- goto bail;
- }
-
- off += mr->offset;
- m = 0;
- n = 0;
- while (off >= mr->map[m]->segs[n].length) {
- off -= mr->map[m]->segs[n].length;
- n++;
- if (n >= IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- isge->mr = mr;
- isge->vaddr = mr->map[m]->segs[n].vaddr + off;
- isge->length = mr->map[m]->segs[n].length - off;
- isge->sge_length = sge->length;
- isge->m = m;
- isge->n = n;
-
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_rkey_ok - check the IB virtual address, length, and RKEY
- * @dev: infiniband device
- * @ss: SGE state
- * @len: length of data
- * @vaddr: virtual address to place data
- * @rkey: rkey to check
- * @acc: access flags
- *
- * Return 1 if successful, otherwise 0.
- */
-int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
- u32 len, u64 vaddr, u32 rkey, int acc)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_lkey_table *rkt = &dev->lk_table;
- struct ipath_sge *sge = &ss->sge;
- struct ipath_mregion *mr;
- unsigned n, m;
- size_t off;
- int ret;
-
- /*
- * We use RKEY == zero for kernel virtual addresses
- * (see ipath_get_dma_mr and ipath_dma.c).
- */
- if (rkey == 0) {
- /* always a kernel port, no locking needed */
- struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
-
- if (pd->user) {
- ret = 0;
- goto bail;
- }
- sge->mr = NULL;
- sge->vaddr = (void *) vaddr;
- sge->length = len;
- sge->sge_length = len;
- ss->sg_list = NULL;
- ss->num_sge = 1;
- ret = 1;
- goto bail;
- }
-
- mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
- if (unlikely(mr == NULL || mr->lkey != rkey ||
- qp->ibqp.pd != mr->pd)) {
- ret = 0;
- goto bail;
- }
-
- off = vaddr - mr->iova;
- if (unlikely(vaddr < mr->iova || off + len > mr->length ||
- (mr->access_flags & acc) == 0)) {
- ret = 0;
- goto bail;
- }
-
- off += mr->offset;
- m = 0;
- n = 0;
- while (off >= mr->map[m]->segs[n].length) {
- off -= mr->map[m]->segs[n].length;
- n++;
- if (n >= IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- sge->mr = mr;
- sge->vaddr = mr->map[m]->segs[n].vaddr + off;
- sge->length = mr->map[m]->segs[n].length - off;
- sge->sge_length = len;
- sge->m = m;
- sge->n = n;
- ss->sg_list = NULL;
- ss->num_sge = 1;
-
- ret = 1;
-
-bail:
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <rdma/ib_smi.h>
-#include <rdma/ib_pma.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004)
-#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008)
-#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C)
-#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C)
-
-static int reply(struct ib_smp *smp)
-{
- /*
- * The verbs framework will handle the directed/LID route
- * packet changes.
- */
- smp->method = IB_MGMT_METHOD_GET_RESP;
- if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
- smp->status |= IB_SMP_DIRECTION;
- return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
-}
-
-static int recv_subn_get_nodedescription(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- if (smp->attr_mod)
- smp->status |= IB_SMP_INVALID_FIELD;
-
- memcpy(smp->data, ibdev->node_desc, sizeof(smp->data));
-
- return reply(smp);
-}
-
-struct nodeinfo {
- u8 base_version;
- u8 class_version;
- u8 node_type;
- u8 num_ports;
- __be64 sys_guid;
- __be64 node_guid;
- __be64 port_guid;
- __be16 partition_cap;
- __be16 device_id;
- __be32 revision;
- u8 local_port_num;
- u8 vendor_id[3];
-} __attribute__ ((packed));
-
-static int recv_subn_get_nodeinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct nodeinfo *nip = (struct nodeinfo *)&smp->data;
- struct ipath_devdata *dd = to_idev(ibdev)->dd;
- u32 vendor, majrev, minrev;
-
- /* GUID 0 is illegal */
- if (smp->attr_mod || (dd->ipath_guid == 0))
- smp->status |= IB_SMP_INVALID_FIELD;
-
- nip->base_version = 1;
- nip->class_version = 1;
- nip->node_type = 1; /* channel adapter */
- /*
- * XXX The num_ports value will need a layer function to get
- * the value if we ever have more than one IB port on a chip.
- * We will also need to get the GUID for the port.
- */
- nip->num_ports = ibdev->phys_port_cnt;
- /* This is already in network order */
- nip->sys_guid = to_idev(ibdev)->sys_image_guid;
- nip->node_guid = dd->ipath_guid;
- nip->port_guid = dd->ipath_guid;
- nip->partition_cap = cpu_to_be16(ipath_get_npkeys(dd));
- nip->device_id = cpu_to_be16(dd->ipath_deviceid);
- majrev = dd->ipath_majrev;
- minrev = dd->ipath_minrev;
- nip->revision = cpu_to_be32((majrev << 16) | minrev);
- nip->local_port_num = port;
- vendor = dd->ipath_vendorid;
- nip->vendor_id[0] = IPATH_SRC_OUI_1;
- nip->vendor_id[1] = IPATH_SRC_OUI_2;
- nip->vendor_id[2] = IPATH_SRC_OUI_3;
-
- return reply(smp);
-}
-
-static int recv_subn_get_guidinfo(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- u32 startgx = 8 * be32_to_cpu(smp->attr_mod);
- __be64 *p = (__be64 *) smp->data;
-
- /* 32 blocks of 8 64-bit GUIDs per block */
-
- memset(smp->data, 0, sizeof(smp->data));
-
- /*
- * We only support one GUID for now. If this changes, the
- * portinfo.guid_cap field needs to be updated too.
- */
- if (startgx == 0) {
- __be64 g = to_idev(ibdev)->dd->ipath_guid;
- if (g == 0)
- /* GUID 0 is illegal */
- smp->status |= IB_SMP_INVALID_FIELD;
- else
- /* The first is a copy of the read-only HW GUID. */
- *p = g;
- } else
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return reply(smp);
-}
-
-static void set_link_width_enabled(struct ipath_devdata *dd, u32 w)
-{
- (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, w);
-}
-
-static void set_link_speed_enabled(struct ipath_devdata *dd, u32 s)
-{
- (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, s);
-}
-
-static int get_overrunthreshold(struct ipath_devdata *dd)
-{
- return (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
-}
-
-/**
- * set_overrunthreshold - set the overrun threshold
- * @dd: the infinipath device
- * @n: the new threshold
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_overrunthreshold(struct ipath_devdata *dd, unsigned n)
-{
- unsigned v;
-
- v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
- if (v != n) {
- dd->ipath_ibcctrl &=
- ~(INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK <<
- INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT);
- dd->ipath_ibcctrl |=
- (u64) n << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- }
- return 0;
-}
-
-static int get_phyerrthreshold(struct ipath_devdata *dd)
-{
- return (dd->ipath_ibcctrl >>
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
-}
-
-/**
- * set_phyerrthreshold - set the physical error threshold
- * @dd: the infinipath device
- * @n: the new threshold
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_phyerrthreshold(struct ipath_devdata *dd, unsigned n)
-{
- unsigned v;
-
- v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
- INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
- if (v != n) {
- dd->ipath_ibcctrl &=
- ~(INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK <<
- INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT);
- dd->ipath_ibcctrl |=
- (u64) n << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- }
- return 0;
-}
-
-/**
- * get_linkdowndefaultstate - get the default linkdown state
- * @dd: the infinipath device
- *
- * Returns zero if the default is POLL, 1 if the default is SLEEP.
- */
-static int get_linkdowndefaultstate(struct ipath_devdata *dd)
-{
- return !!(dd->ipath_ibcctrl & INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE);
-}
-
-static int recv_subn_get_portinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct ipath_ibdev *dev;
- struct ipath_devdata *dd;
- struct ib_port_info *pip = (struct ib_port_info *)smp->data;
- u16 lid;
- u8 ibcstat;
- u8 mtu;
- int ret;
-
- if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) {
- smp->status |= IB_SMP_INVALID_FIELD;
- ret = reply(smp);
- goto bail;
- }
-
- dev = to_idev(ibdev);
- dd = dev->dd;
-
- /* Clear all fields. Only set the non-zero fields. */
- memset(smp->data, 0, sizeof(smp->data));
-
- /* Only return the mkey if the protection field allows it. */
- if (smp->method == IB_MGMT_METHOD_SET || dev->mkey == smp->mkey ||
- dev->mkeyprot == 0)
- pip->mkey = dev->mkey;
- pip->gid_prefix = dev->gid_prefix;
- lid = dd->ipath_lid;
- pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE;
- pip->sm_lid = cpu_to_be16(dev->sm_lid);
- pip->cap_mask = cpu_to_be32(dev->port_cap_flags);
- /* pip->diag_code; */
- pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period);
- pip->local_port_num = port;
- pip->link_width_enabled = dd->ipath_link_width_enabled;
- pip->link_width_supported = dd->ipath_link_width_supported;
- pip->link_width_active = dd->ipath_link_width_active;
- pip->linkspeed_portstate = dd->ipath_link_speed_supported << 4;
- ibcstat = dd->ipath_lastibcstat;
- /* map LinkState to IB portinfo values. */
- pip->linkspeed_portstate |= ipath_ib_linkstate(dd, ibcstat) + 1;
-
- pip->portphysstate_linkdown =
- (ipath_cvt_physportstate[ibcstat & dd->ibcs_lts_mask] << 4) |
- (get_linkdowndefaultstate(dd) ? 1 : 2);
- pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dd->ipath_lmc;
- pip->linkspeedactive_enabled = (dd->ipath_link_speed_active << 4) |
- dd->ipath_link_speed_enabled;
- switch (dd->ipath_ibmtu) {
- case 4096:
- mtu = IB_MTU_4096;
- break;
- case 2048:
- mtu = IB_MTU_2048;
- break;
- case 1024:
- mtu = IB_MTU_1024;
- break;
- case 512:
- mtu = IB_MTU_512;
- break;
- case 256:
- mtu = IB_MTU_256;
- break;
- default: /* oops, something is wrong */
- mtu = IB_MTU_2048;
- break;
- }
- pip->neighbormtu_mastersmsl = (mtu << 4) | dev->sm_sl;
- pip->vlcap_inittype = 0x10; /* VLCap = VL0, InitType = 0 */
- pip->vl_high_limit = dev->vl_high_limit;
- /* pip->vl_arb_high_cap; // only one VL */
- /* pip->vl_arb_low_cap; // only one VL */
- /* InitTypeReply = 0 */
- /* our mtu cap depends on whether 4K MTU enabled or not */
- pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
- /* HCAs ignore VLStallCount and HOQLife */
- /* pip->vlstallcnt_hoqlife; */
- pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
- pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
- /* P_KeyViolations are counted by hardware. */
- pip->pkey_violations =
- cpu_to_be16((ipath_get_cr_errpkey(dd) -
- dev->z_pkey_violations) & 0xFFFF);
- pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
- /* Only the hardware GUID is supported for now */
- pip->guid_cap = 1;
- pip->clientrereg_resv_subnetto = dev->subnet_timeout;
- /* 32.768 usec. response time (guessing) */
- pip->resv_resptimevalue = 3;
- pip->localphyerrors_overrunerrors =
- (get_phyerrthreshold(dd) << 4) |
- get_overrunthreshold(dd);
- /* pip->max_credit_hint; */
- if (dev->port_cap_flags & IB_PORT_LINK_LATENCY_SUP) {
- u32 v;
-
- v = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LINKLATENCY);
- pip->link_roundtrip_latency[0] = v >> 16;
- pip->link_roundtrip_latency[1] = v >> 8;
- pip->link_roundtrip_latency[2] = v;
- }
-
- ret = reply(smp);
-
-bail:
- return ret;
-}
-
-/**
- * get_pkeys - return the PKEY table for port 0
- * @dd: the infinipath device
- * @pkeys: the pkey table is placed here
- */
-static int get_pkeys(struct ipath_devdata *dd, u16 * pkeys)
-{
- /* always a kernel port, no locking needed */
- struct ipath_portdata *pd = dd->ipath_pd[0];
-
- memcpy(pkeys, pd->port_pkeys, sizeof(pd->port_pkeys));
-
- return 0;
-}
-
-static int recv_subn_get_pkeytable(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
- u16 *p = (u16 *) smp->data;
- __be16 *q = (__be16 *) smp->data;
-
- /* 64 blocks of 32 16-bit P_Key entries */
-
- memset(smp->data, 0, sizeof(smp->data));
- if (startpx == 0) {
- struct ipath_ibdev *dev = to_idev(ibdev);
- unsigned i, n = ipath_get_npkeys(dev->dd);
-
- get_pkeys(dev->dd, p);
-
- for (i = 0; i < n; i++)
- q[i] = cpu_to_be16(p[i]);
- } else
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return reply(smp);
-}
-
-static int recv_subn_set_guidinfo(struct ib_smp *smp,
- struct ib_device *ibdev)
-{
- /* The only GUID we support is the first read-only entry. */
- return recv_subn_get_guidinfo(smp, ibdev);
-}
-
-/**
- * set_linkdowndefaultstate - set the default linkdown state
- * @dd: the infinipath device
- * @sleep: the new state
- *
- * Note that this will only take effect when the link state changes.
- */
-static int set_linkdowndefaultstate(struct ipath_devdata *dd, int sleep)
-{
- if (sleep)
- dd->ipath_ibcctrl |= INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
- else
- dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl);
- return 0;
-}
-
-/**
- * recv_subn_set_portinfo - set port information
- * @smp: the incoming SM packet
- * @ibdev: the infiniband device
- * @port: the port on the device
- *
- * Set Portinfo (see ch. 14.2.5.6).
- */
-static int recv_subn_set_portinfo(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_port_info *pip = (struct ib_port_info *)smp->data;
- struct ib_event event;
- struct ipath_ibdev *dev;
- struct ipath_devdata *dd;
- char clientrereg = 0;
- u16 lid, smlid;
- u8 lwe;
- u8 lse;
- u8 state;
- u16 lstate;
- u32 mtu;
- int ret, ore;
-
- if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt)
- goto err;
-
- dev = to_idev(ibdev);
- dd = dev->dd;
- event.device = ibdev;
- event.element.port_num = port;
-
- dev->mkey = pip->mkey;
- dev->gid_prefix = pip->gid_prefix;
- dev->mkey_lease_period = be16_to_cpu(pip->mkey_lease_period);
-
- lid = be16_to_cpu(pip->lid);
- if (dd->ipath_lid != lid ||
- dd->ipath_lmc != (pip->mkeyprot_resv_lmc & 7)) {
- /* Must be a valid unicast LID address. */
- if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE)
- goto err;
- ipath_set_lid(dd, lid, pip->mkeyprot_resv_lmc & 7);
- event.event = IB_EVENT_LID_CHANGE;
- ib_dispatch_event(&event);
- }
-
- smlid = be16_to_cpu(pip->sm_lid);
- if (smlid != dev->sm_lid) {
- /* Must be a valid unicast LID address. */
- if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE)
- goto err;
- dev->sm_lid = smlid;
- event.event = IB_EVENT_SM_CHANGE;
- ib_dispatch_event(&event);
- }
-
- /* Allow 1x or 4x to be set (see 14.2.6.6). */
- lwe = pip->link_width_enabled;
- if (lwe) {
- if (lwe == 0xFF)
- lwe = dd->ipath_link_width_supported;
- else if (lwe >= 16 || (lwe & ~dd->ipath_link_width_supported))
- goto err;
- set_link_width_enabled(dd, lwe);
- }
-
- /* Allow 2.5 or 5.0 Gbs. */
- lse = pip->linkspeedactive_enabled & 0xF;
- if (lse) {
- if (lse == 15)
- lse = dd->ipath_link_speed_supported;
- else if (lse >= 8 || (lse & ~dd->ipath_link_speed_supported))
- goto err;
- set_link_speed_enabled(dd, lse);
- }
-
- /* Set link down default state. */
- switch (pip->portphysstate_linkdown & 0xF) {
- case 0: /* NOP */
- break;
- case 1: /* SLEEP */
- if (set_linkdowndefaultstate(dd, 1))
- goto err;
- break;
- case 2: /* POLL */
- if (set_linkdowndefaultstate(dd, 0))
- goto err;
- break;
- default:
- goto err;
- }
-
- dev->mkeyprot = pip->mkeyprot_resv_lmc >> 6;
- dev->vl_high_limit = pip->vl_high_limit;
-
- switch ((pip->neighbormtu_mastersmsl >> 4) & 0xF) {
- case IB_MTU_256:
- mtu = 256;
- break;
- case IB_MTU_512:
- mtu = 512;
- break;
- case IB_MTU_1024:
- mtu = 1024;
- break;
- case IB_MTU_2048:
- mtu = 2048;
- break;
- case IB_MTU_4096:
- if (!ipath_mtu4096)
- goto err;
- mtu = 4096;
- break;
- default:
- /* XXX We have already partially updated our state! */
- goto err;
- }
- ipath_set_mtu(dd, mtu);
-
- dev->sm_sl = pip->neighbormtu_mastersmsl & 0xF;
-
- /* We only support VL0 */
- if (((pip->operationalvl_pei_peo_fpi_fpo >> 4) & 0xF) > 1)
- goto err;
-
- if (pip->mkey_violations == 0)
- dev->mkey_violations = 0;
-
- /*
- * Hardware counter can't be reset so snapshot and subtract
- * later.
- */
- if (pip->pkey_violations == 0)
- dev->z_pkey_violations = ipath_get_cr_errpkey(dd);
-
- if (pip->qkey_violations == 0)
- dev->qkey_violations = 0;
-
- ore = pip->localphyerrors_overrunerrors;
- if (set_phyerrthreshold(dd, (ore >> 4) & 0xF))
- goto err;
-
- if (set_overrunthreshold(dd, (ore & 0xF)))
- goto err;
-
- dev->subnet_timeout = pip->clientrereg_resv_subnetto & 0x1F;
-
- if (pip->clientrereg_resv_subnetto & 0x80) {
- clientrereg = 1;
- event.event = IB_EVENT_CLIENT_REREGISTER;
- ib_dispatch_event(&event);
- }
-
- /*
- * Do the port state change now that the other link parameters
- * have been set.
- * Changing the port physical state only makes sense if the link
- * is down or is being set to down.
- */
- state = pip->linkspeed_portstate & 0xF;
- lstate = (pip->portphysstate_linkdown >> 4) & 0xF;
- if (lstate && !(state == IB_PORT_DOWN || state == IB_PORT_NOP))
- goto err;
-
- /*
- * Only state changes of DOWN, ARM, and ACTIVE are valid
- * and must be in the correct state to take effect (see 7.2.6).
- */
- switch (state) {
- case IB_PORT_NOP:
- if (lstate == 0)
- break;
- /* FALLTHROUGH */
- case IB_PORT_DOWN:
- if (lstate == 0)
- lstate = IPATH_IB_LINKDOWN_ONLY;
- else if (lstate == 1)
- lstate = IPATH_IB_LINKDOWN_SLEEP;
- else if (lstate == 2)
- lstate = IPATH_IB_LINKDOWN;
- else if (lstate == 3)
- lstate = IPATH_IB_LINKDOWN_DISABLE;
- else
- goto err;
- ipath_set_linkstate(dd, lstate);
- if (lstate == IPATH_IB_LINKDOWN_DISABLE) {
- ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
- goto done;
- }
- ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED |
- IPATH_LINKACTIVE, 1000);
- break;
- case IB_PORT_ARMED:
- ipath_set_linkstate(dd, IPATH_IB_LINKARM);
- break;
- case IB_PORT_ACTIVE:
- ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
- break;
- default:
- /* XXX We have already partially updated our state! */
- goto err;
- }
-
- ret = recv_subn_get_portinfo(smp, ibdev, port);
-
- if (clientrereg)
- pip->clientrereg_resv_subnetto |= 0x80;
-
- goto done;
-
-err:
- smp->status |= IB_SMP_INVALID_FIELD;
- ret = recv_subn_get_portinfo(smp, ibdev, port);
-
-done:
- return ret;
-}
-
-/**
- * rm_pkey - decrecment the reference count for the given PKEY
- * @dd: the infinipath device
- * @key: the PKEY index
- *
- * Return true if this was the last reference and the hardware table entry
- * needs to be changed.
- */
-static int rm_pkey(struct ipath_devdata *dd, u16 key)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (dd->ipath_pkeys[i] != key)
- continue;
- if (atomic_dec_and_test(&dd->ipath_pkeyrefs[i])) {
- dd->ipath_pkeys[i] = 0;
- ret = 1;
- goto bail;
- }
- break;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * add_pkey - add the given PKEY to the hardware table
- * @dd: the infinipath device
- * @key: the PKEY
- *
- * Return an error code if unable to add the entry, zero if no change,
- * or 1 if the hardware PKEY register needs to be updated.
- */
-static int add_pkey(struct ipath_devdata *dd, u16 key)
-{
- int i;
- u16 lkey = key & 0x7FFF;
- int any = 0;
- int ret;
-
- if (lkey == 0x7FFF) {
- ret = 0;
- goto bail;
- }
-
- /* Look for an empty slot or a matching PKEY. */
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i]) {
- any++;
- continue;
- }
- /* If it matches exactly, try to increment the ref count */
- if (dd->ipath_pkeys[i] == key) {
- if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) {
- ret = 0;
- goto bail;
- }
- /* Lost the race. Look for an empty slot below. */
- atomic_dec(&dd->ipath_pkeyrefs[i]);
- any++;
- }
- /*
- * It makes no sense to have both the limited and unlimited
- * PKEY set at the same time since the unlimited one will
- * disable the limited one.
- */
- if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
- ret = -EEXIST;
- goto bail;
- }
- }
- if (!any) {
- ret = -EBUSY;
- goto bail;
- }
- for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
- if (!dd->ipath_pkeys[i] &&
- atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
- /* for ipathstats, etc. */
- ipath_stats.sps_pkeys[i] = lkey;
- dd->ipath_pkeys[i] = key;
- ret = 1;
- goto bail;
- }
- }
- ret = -EBUSY;
-
-bail:
- return ret;
-}
-
-/**
- * set_pkeys - set the PKEY table for port 0
- * @dd: the infinipath device
- * @pkeys: the PKEY table
- */
-static int set_pkeys(struct ipath_devdata *dd, u16 *pkeys, u8 port)
-{
- struct ipath_portdata *pd;
- int i;
- int changed = 0;
-
- /* always a kernel port, no locking needed */
- pd = dd->ipath_pd[0];
-
- for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
- u16 key = pkeys[i];
- u16 okey = pd->port_pkeys[i];
-
- if (key == okey)
- continue;
- /*
- * The value of this PKEY table entry is changing.
- * Remove the old entry in the hardware's array of PKEYs.
- */
- if (okey & 0x7FFF)
- changed |= rm_pkey(dd, okey);
- if (key & 0x7FFF) {
- int ret = add_pkey(dd, key);
-
- if (ret < 0)
- key = 0;
- else
- changed |= ret;
- }
- pd->port_pkeys[i] = key;
- }
- if (changed) {
- u64 pkey;
- struct ib_event event;
-
- pkey = (u64) dd->ipath_pkeys[0] |
- ((u64) dd->ipath_pkeys[1] << 16) |
- ((u64) dd->ipath_pkeys[2] << 32) |
- ((u64) dd->ipath_pkeys[3] << 48);
- ipath_cdbg(VERBOSE, "p0 new pkey reg %llx\n",
- (unsigned long long) pkey);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
- pkey);
-
- event.event = IB_EVENT_PKEY_CHANGE;
- event.device = &dd->verbs_dev->ibdev;
- event.element.port_num = port;
- ib_dispatch_event(&event);
- }
- return 0;
-}
-
-static int recv_subn_set_pkeytable(struct ib_smp *smp,
- struct ib_device *ibdev, u8 port)
-{
- u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
- __be16 *p = (__be16 *) smp->data;
- u16 *q = (u16 *) smp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- unsigned i, n = ipath_get_npkeys(dev->dd);
-
- for (i = 0; i < n; i++)
- q[i] = be16_to_cpu(p[i]);
-
- if (startpx != 0 || set_pkeys(dev->dd, q, port) != 0)
- smp->status |= IB_SMP_INVALID_FIELD;
-
- return recv_subn_get_pkeytable(smp, ibdev);
-}
-
-static int recv_pma_get_classportinfo(struct ib_pma_mad *pmp)
-{
- struct ib_class_port_info *p =
- (struct ib_class_port_info *)pmp->data;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- if (pmp->mad_hdr.attr_mod != 0)
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- /* Indicate AllPortSelect is valid (only one port anyway) */
- p->capability_mask = cpu_to_be16(1 << 8);
- p->base_version = 1;
- p->class_version = 1;
- /*
- * Expected response time is 4.096 usec. * 2^18 == 1.073741824
- * sec.
- */
- p->resp_time_value = 18;
-
- return reply((struct ib_smp *) pmp);
-}
-
-/*
- * The PortSamplesControl.CounterMasks field is an array of 3 bit fields
- * which specify the N'th counter's capabilities. See ch. 16.1.3.2.
- * We support 5 counters which only count the mandatory quantities.
- */
-#define COUNTER_MASK(q, n) (q << ((9 - n) * 3))
-#define COUNTER_MASK0_9 cpu_to_be32(COUNTER_MASK(1, 0) | \
- COUNTER_MASK(1, 1) | \
- COUNTER_MASK(1, 2) | \
- COUNTER_MASK(1, 3) | \
- COUNTER_MASK(1, 4))
-
-static int recv_pma_get_portsamplescontrol(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portsamplescontrol *p =
- (struct ib_pma_portsamplescontrol *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- unsigned long flags;
- u8 port_select = p->port_select;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
- /*
- * Ticks are 10x the link transfer period which for 2.5Gbs is 4
- * nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample
- * intervals are counted in ticks. Since we use Linux timers, that
- * count in jiffies, we can't sample for less than 1000 ticks if HZ
- * == 1000 (4000 ticks if HZ is 250). link_speed_active returns 2 for
- * DDR, 1 for SDR, set the tick to 1 for DDR, 0 for SDR on chips that
- * have hardware support for delaying packets.
- */
- if (crp->cr_psstat)
- p->tick = dev->dd->ipath_link_speed_active - 1;
- else
- p->tick = 250; /* 1 usec. */
- p->counter_width = 4; /* 32 bit counters */
- p->counter_mask0_9 = COUNTER_MASK0_9;
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (crp->cr_psstat)
- p->sample_status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- p->sample_status = dev->pma_sample_status;
- p->sample_start = cpu_to_be32(dev->pma_sample_start);
- p->sample_interval = cpu_to_be32(dev->pma_sample_interval);
- p->tag = cpu_to_be16(dev->pma_tag);
- p->counter_select[0] = dev->pma_counter_select[0];
- p->counter_select[1] = dev->pma_counter_select[1];
- p->counter_select[2] = dev->pma_counter_select[2];
- p->counter_select[3] = dev->pma_counter_select[3];
- p->counter_select[4] = dev->pma_counter_select[4];
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_set_portsamplescontrol(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portsamplescontrol *p =
- (struct ib_pma_portsamplescontrol *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- unsigned long flags;
- u8 status;
- int ret;
-
- if (pmp->mad_hdr.attr_mod != 0 ||
- (p->port_select != port && p->port_select != 0xFF)) {
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- if (status == IB_PMA_SAMPLE_STATUS_DONE) {
- dev->pma_sample_start = be32_to_cpu(p->sample_start);
- dev->pma_sample_interval = be32_to_cpu(p->sample_interval);
- dev->pma_tag = be16_to_cpu(p->tag);
- dev->pma_counter_select[0] = p->counter_select[0];
- dev->pma_counter_select[1] = p->counter_select[1];
- dev->pma_counter_select[2] = p->counter_select[2];
- dev->pma_counter_select[3] = p->counter_select[3];
- dev->pma_counter_select[4] = p->counter_select[4];
- if (crp->cr_psstat) {
- ipath_write_creg(dev->dd, crp->cr_psinterval,
- dev->pma_sample_interval);
- ipath_write_creg(dev->dd, crp->cr_psstart,
- dev->pma_sample_start);
- } else
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port);
-
-bail:
- return ret;
-}
-
-static u64 get_counter(struct ipath_ibdev *dev,
- struct ipath_cregs const *crp,
- __be16 sel)
-{
- u64 ret;
-
- switch (sel) {
- case IB_PMA_PORT_XMIT_DATA:
- ret = (crp->cr_psxmitdatacount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitdatacount) :
- dev->ipath_sword;
- break;
- case IB_PMA_PORT_RCV_DATA:
- ret = (crp->cr_psrcvdatacount) ?
- ipath_read_creg32(dev->dd, crp->cr_psrcvdatacount) :
- dev->ipath_rword;
- break;
- case IB_PMA_PORT_XMIT_PKTS:
- ret = (crp->cr_psxmitpktscount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitpktscount) :
- dev->ipath_spkts;
- break;
- case IB_PMA_PORT_RCV_PKTS:
- ret = (crp->cr_psrcvpktscount) ?
- ipath_read_creg32(dev->dd, crp->cr_psrcvpktscount) :
- dev->ipath_rpkts;
- break;
- case IB_PMA_PORT_XMIT_WAIT:
- ret = (crp->cr_psxmitwaitcount) ?
- ipath_read_creg32(dev->dd, crp->cr_psxmitwaitcount) :
- dev->ipath_xmit_wait;
- break;
- default:
- ret = 0;
- }
-
- return ret;
-}
-
-static int recv_pma_get_portsamplesresult(struct ib_pma_mad *pmp,
- struct ib_device *ibdev)
-{
- struct ib_pma_portsamplesresult *p =
- (struct ib_pma_portsamplesresult *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- u8 status;
- int i;
-
- memset(pmp->data, 0, sizeof(pmp->data));
- p->tag = cpu_to_be16(dev->pma_tag);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- p->sample_status = cpu_to_be16(status);
- for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
- p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
- cpu_to_be32(
- get_counter(dev, crp, dev->pma_counter_select[i]));
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portsamplesresult_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev)
-{
- struct ib_pma_portsamplesresult_ext *p =
- (struct ib_pma_portsamplesresult_ext *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_cregs const *crp = dev->dd->ipath_cregs;
- u8 status;
- int i;
-
- memset(pmp->data, 0, sizeof(pmp->data));
- p->tag = cpu_to_be16(dev->pma_tag);
- if (crp->cr_psstat)
- status = ipath_read_creg32(dev->dd, crp->cr_psstat);
- else
- status = dev->pma_sample_status;
- p->sample_status = cpu_to_be16(status);
- /* 64 bits */
- p->extended_width = cpu_to_be32(0x80000000);
- for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
- p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
- cpu_to_be64(
- get_counter(dev, crp, dev->pma_counter_select[i]));
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portcounters(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_verbs_counters cntrs;
- u8 port_select = p->port_select;
-
- ipath_get_counters(dev->dd, &cntrs);
-
- /* Adjust counters for any resets done. */
- cntrs.symbol_error_counter -= dev->z_symbol_error_counter;
- cntrs.link_error_recovery_counter -=
- dev->z_link_error_recovery_counter;
- cntrs.link_downed_counter -= dev->z_link_downed_counter;
- cntrs.port_rcv_errors += dev->rcv_errors;
- cntrs.port_rcv_errors -= dev->z_port_rcv_errors;
- cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors;
- cntrs.port_xmit_discards -= dev->z_port_xmit_discards;
- cntrs.port_xmit_data -= dev->z_port_xmit_data;
- cntrs.port_rcv_data -= dev->z_port_rcv_data;
- cntrs.port_xmit_packets -= dev->z_port_xmit_packets;
- cntrs.port_rcv_packets -= dev->z_port_rcv_packets;
- cntrs.local_link_integrity_errors -=
- dev->z_local_link_integrity_errors;
- cntrs.excessive_buffer_overrun_errors -=
- dev->z_excessive_buffer_overrun_errors;
- cntrs.vl15_dropped -= dev->z_vl15_dropped;
- cntrs.vl15_dropped += dev->n_vl15_dropped;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- if (cntrs.symbol_error_counter > 0xFFFFUL)
- p->symbol_error_counter = cpu_to_be16(0xFFFF);
- else
- p->symbol_error_counter =
- cpu_to_be16((u16)cntrs.symbol_error_counter);
- if (cntrs.link_error_recovery_counter > 0xFFUL)
- p->link_error_recovery_counter = 0xFF;
- else
- p->link_error_recovery_counter =
- (u8)cntrs.link_error_recovery_counter;
- if (cntrs.link_downed_counter > 0xFFUL)
- p->link_downed_counter = 0xFF;
- else
- p->link_downed_counter = (u8)cntrs.link_downed_counter;
- if (cntrs.port_rcv_errors > 0xFFFFUL)
- p->port_rcv_errors = cpu_to_be16(0xFFFF);
- else
- p->port_rcv_errors =
- cpu_to_be16((u16) cntrs.port_rcv_errors);
- if (cntrs.port_rcv_remphys_errors > 0xFFFFUL)
- p->port_rcv_remphys_errors = cpu_to_be16(0xFFFF);
- else
- p->port_rcv_remphys_errors =
- cpu_to_be16((u16)cntrs.port_rcv_remphys_errors);
- if (cntrs.port_xmit_discards > 0xFFFFUL)
- p->port_xmit_discards = cpu_to_be16(0xFFFF);
- else
- p->port_xmit_discards =
- cpu_to_be16((u16)cntrs.port_xmit_discards);
- if (cntrs.local_link_integrity_errors > 0xFUL)
- cntrs.local_link_integrity_errors = 0xFUL;
- if (cntrs.excessive_buffer_overrun_errors > 0xFUL)
- cntrs.excessive_buffer_overrun_errors = 0xFUL;
- p->link_overrun_errors = (cntrs.local_link_integrity_errors << 4) |
- cntrs.excessive_buffer_overrun_errors;
- if (cntrs.vl15_dropped > 0xFFFFUL)
- p->vl15_dropped = cpu_to_be16(0xFFFF);
- else
- p->vl15_dropped = cpu_to_be16((u16)cntrs.vl15_dropped);
- if (cntrs.port_xmit_data > 0xFFFFFFFFUL)
- p->port_xmit_data = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_xmit_data = cpu_to_be32((u32)cntrs.port_xmit_data);
- if (cntrs.port_rcv_data > 0xFFFFFFFFUL)
- p->port_rcv_data = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_rcv_data = cpu_to_be32((u32)cntrs.port_rcv_data);
- if (cntrs.port_xmit_packets > 0xFFFFFFFFUL)
- p->port_xmit_packets = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_xmit_packets =
- cpu_to_be32((u32)cntrs.port_xmit_packets);
- if (cntrs.port_rcv_packets > 0xFFFFFFFFUL)
- p->port_rcv_packets = cpu_to_be32(0xFFFFFFFF);
- else
- p->port_rcv_packets =
- cpu_to_be32((u32) cntrs.port_rcv_packets);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_get_portcounters_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters_ext *p =
- (struct ib_pma_portcounters_ext *)pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- u64 swords, rwords, spkts, rpkts, xwait;
- u8 port_select = p->port_select;
-
- ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
- &rpkts, &xwait);
-
- /* Adjust counters for any resets done. */
- swords -= dev->z_port_xmit_data;
- rwords -= dev->z_port_rcv_data;
- spkts -= dev->z_port_xmit_packets;
- rpkts -= dev->z_port_rcv_packets;
-
- memset(pmp->data, 0, sizeof(pmp->data));
-
- p->port_select = port_select;
- if (pmp->mad_hdr.attr_mod != 0 ||
- (port_select != port && port_select != 0xFF))
- pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
-
- p->port_xmit_data = cpu_to_be64(swords);
- p->port_rcv_data = cpu_to_be64(rwords);
- p->port_xmit_packets = cpu_to_be64(spkts);
- p->port_rcv_packets = cpu_to_be64(rpkts);
- p->port_unicast_xmit_packets = cpu_to_be64(dev->n_unicast_xmit);
- p->port_unicast_rcv_packets = cpu_to_be64(dev->n_unicast_rcv);
- p->port_multicast_xmit_packets = cpu_to_be64(dev->n_multicast_xmit);
- p->port_multicast_rcv_packets = cpu_to_be64(dev->n_multicast_rcv);
-
- return reply((struct ib_smp *) pmp);
-}
-
-static int recv_pma_set_portcounters(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_verbs_counters cntrs;
-
- /*
- * Since the HW doesn't support clearing counters, we save the
- * current count and subtract it from future responses.
- */
- ipath_get_counters(dev->dd, &cntrs);
-
- if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR)
- dev->z_symbol_error_counter = cntrs.symbol_error_counter;
-
- if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY)
- dev->z_link_error_recovery_counter =
- cntrs.link_error_recovery_counter;
-
- if (p->counter_select & IB_PMA_SEL_LINK_DOWNED)
- dev->z_link_downed_counter = cntrs.link_downed_counter;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS)
- dev->z_port_rcv_errors =
- cntrs.port_rcv_errors + dev->rcv_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS)
- dev->z_port_rcv_remphys_errors =
- cntrs.port_rcv_remphys_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS)
- dev->z_port_xmit_discards = cntrs.port_xmit_discards;
-
- if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS)
- dev->z_local_link_integrity_errors =
- cntrs.local_link_integrity_errors;
-
- if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS)
- dev->z_excessive_buffer_overrun_errors =
- cntrs.excessive_buffer_overrun_errors;
-
- if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) {
- dev->n_vl15_dropped = 0;
- dev->z_vl15_dropped = cntrs.vl15_dropped;
- }
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA)
- dev->z_port_xmit_data = cntrs.port_xmit_data;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA)
- dev->z_port_rcv_data = cntrs.port_rcv_data;
-
- if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS)
- dev->z_port_xmit_packets = cntrs.port_xmit_packets;
-
- if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS)
- dev->z_port_rcv_packets = cntrs.port_rcv_packets;
-
- return recv_pma_get_portcounters(pmp, ibdev, port);
-}
-
-static int recv_pma_set_portcounters_ext(struct ib_pma_mad *pmp,
- struct ib_device *ibdev, u8 port)
-{
- struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
- pmp->data;
- struct ipath_ibdev *dev = to_idev(ibdev);
- u64 swords, rwords, spkts, rpkts, xwait;
-
- ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
- &rpkts, &xwait);
-
- if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA)
- dev->z_port_xmit_data = swords;
-
- if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA)
- dev->z_port_rcv_data = rwords;
-
- if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS)
- dev->z_port_xmit_packets = spkts;
-
- if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS)
- dev->z_port_rcv_packets = rpkts;
-
- if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS)
- dev->n_unicast_xmit = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_UNI_RCV_PACKETS)
- dev->n_unicast_rcv = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS)
- dev->n_multicast_xmit = 0;
-
- if (p->counter_select & IB_PMA_SELX_PORT_MULTI_RCV_PACKETS)
- dev->n_multicast_rcv = 0;
-
- return recv_pma_get_portcounters_ext(pmp, ibdev, port);
-}
-
-static int process_subn(struct ib_device *ibdev, int mad_flags,
- u8 port_num, const struct ib_mad *in_mad,
- struct ib_mad *out_mad)
-{
- struct ib_smp *smp = (struct ib_smp *)out_mad;
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- *out_mad = *in_mad;
- if (smp->class_version != 1) {
- smp->status |= IB_SMP_UNSUP_VERSION;
- ret = reply(smp);
- goto bail;
- }
-
- /* Is the mkey in the process of expiring? */
- if (dev->mkey_lease_timeout &&
- time_after_eq(jiffies, dev->mkey_lease_timeout)) {
- /* Clear timeout and mkey protection field. */
- dev->mkey_lease_timeout = 0;
- dev->mkeyprot = 0;
- }
-
- /*
- * M_Key checking depends on
- * Portinfo:M_Key_protect_bits
- */
- if ((mad_flags & IB_MAD_IGNORE_MKEY) == 0 && dev->mkey != 0 &&
- dev->mkey != smp->mkey &&
- (smp->method == IB_MGMT_METHOD_SET ||
- (smp->method == IB_MGMT_METHOD_GET &&
- dev->mkeyprot >= 2))) {
- if (dev->mkey_violations != 0xFFFF)
- ++dev->mkey_violations;
- if (dev->mkey_lease_timeout ||
- dev->mkey_lease_period == 0) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- dev->mkey_lease_timeout = jiffies +
- dev->mkey_lease_period * HZ;
- /* Future: Generate a trap notice. */
- ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
- goto bail;
- } else if (dev->mkey_lease_timeout)
- dev->mkey_lease_timeout = 0;
-
- switch (smp->method) {
- case IB_MGMT_METHOD_GET:
- switch (smp->attr_id) {
- case IB_SMP_ATTR_NODE_DESC:
- ret = recv_subn_get_nodedescription(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_NODE_INFO:
- ret = recv_subn_get_nodeinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_GUID_INFO:
- ret = recv_subn_get_guidinfo(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_PORT_INFO:
- ret = recv_subn_get_portinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_PKEY_TABLE:
- ret = recv_subn_get_pkeytable(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_SM_INFO:
- if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- if (dev->port_cap_flags & IB_PORT_SM) {
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- }
- /* FALLTHROUGH */
- default:
- smp->status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply(smp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_SET:
- switch (smp->attr_id) {
- case IB_SMP_ATTR_GUID_INFO:
- ret = recv_subn_set_guidinfo(smp, ibdev);
- goto bail;
- case IB_SMP_ATTR_PORT_INFO:
- ret = recv_subn_set_portinfo(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_PKEY_TABLE:
- ret = recv_subn_set_pkeytable(smp, ibdev, port_num);
- goto bail;
- case IB_SMP_ATTR_SM_INFO:
- if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
- ret = IB_MAD_RESULT_SUCCESS |
- IB_MAD_RESULT_CONSUMED;
- goto bail;
- }
- if (dev->port_cap_flags & IB_PORT_SM) {
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- }
- /* FALLTHROUGH */
- default:
- smp->status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply(smp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_TRAP:
- case IB_MGMT_METHOD_REPORT:
- case IB_MGMT_METHOD_REPORT_RESP:
- case IB_MGMT_METHOD_TRAP_REPRESS:
- case IB_MGMT_METHOD_GET_RESP:
- /*
- * The ib_mad module will call us to process responses
- * before checking for other consumers.
- * Just tell the caller to process it normally.
- */
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- default:
- smp->status |= IB_SMP_UNSUP_METHOD;
- ret = reply(smp);
- }
-
-bail:
- return ret;
-}
-
-static int process_perf(struct ib_device *ibdev, u8 port_num,
- const struct ib_mad *in_mad,
- struct ib_mad *out_mad)
-{
- struct ib_pma_mad *pmp = (struct ib_pma_mad *)out_mad;
- int ret;
-
- *out_mad = *in_mad;
- if (pmp->mad_hdr.class_version != 1) {
- pmp->mad_hdr.status |= IB_SMP_UNSUP_VERSION;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- switch (pmp->mad_hdr.method) {
- case IB_MGMT_METHOD_GET:
- switch (pmp->mad_hdr.attr_id) {
- case IB_PMA_CLASS_PORT_INFO:
- ret = recv_pma_get_classportinfo(pmp);
- goto bail;
- case IB_PMA_PORT_SAMPLES_CONTROL:
- ret = recv_pma_get_portsamplescontrol(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_SAMPLES_RESULT:
- ret = recv_pma_get_portsamplesresult(pmp, ibdev);
- goto bail;
- case IB_PMA_PORT_SAMPLES_RESULT_EXT:
- ret = recv_pma_get_portsamplesresult_ext(pmp,
- ibdev);
- goto bail;
- case IB_PMA_PORT_COUNTERS:
- ret = recv_pma_get_portcounters(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS_EXT:
- ret = recv_pma_get_portcounters_ext(pmp, ibdev,
- port_num);
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_SET:
- switch (pmp->mad_hdr.attr_id) {
- case IB_PMA_PORT_SAMPLES_CONTROL:
- ret = recv_pma_set_portsamplescontrol(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS:
- ret = recv_pma_set_portcounters(pmp, ibdev,
- port_num);
- goto bail;
- case IB_PMA_PORT_COUNTERS_EXT:
- ret = recv_pma_set_portcounters_ext(pmp, ibdev,
- port_num);
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
- ret = reply((struct ib_smp *) pmp);
- goto bail;
- }
-
- case IB_MGMT_METHOD_GET_RESP:
- /*
- * The ib_mad module will call us to process responses
- * before checking for other consumers.
- * Just tell the caller to process it normally.
- */
- ret = IB_MAD_RESULT_SUCCESS;
- goto bail;
- default:
- pmp->mad_hdr.status |= IB_SMP_UNSUP_METHOD;
- ret = reply((struct ib_smp *) pmp);
- }
-
-bail:
- return ret;
-}
-
-/**
- * ipath_process_mad - process an incoming MAD packet
- * @ibdev: the infiniband device this packet came in on
- * @mad_flags: MAD flags
- * @port_num: the port number this packet came in on
- * @in_wc: the work completion entry for this packet
- * @in_grh: the global route header for this packet
- * @in_mad: the incoming MAD
- * @out_mad: any outgoing MAD reply
- *
- * Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not
- * interested in processing.
- *
- * Note that the verbs framework has already done the MAD sanity checks,
- * and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE
- * MADs.
- *
- * This is called by the ib_mad module.
- */
-int ipath_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
- const struct ib_wc *in_wc, const struct ib_grh *in_grh,
- const struct ib_mad_hdr *in, size_t in_mad_size,
- struct ib_mad_hdr *out, size_t *out_mad_size,
- u16 *out_mad_pkey_index)
-{
- int ret;
- const struct ib_mad *in_mad = (const struct ib_mad *)in;
- struct ib_mad *out_mad = (struct ib_mad *)out;
-
- if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
- *out_mad_size != sizeof(*out_mad)))
- return IB_MAD_RESULT_FAILURE;
-
- switch (in_mad->mad_hdr.mgmt_class) {
- case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
- case IB_MGMT_CLASS_SUBN_LID_ROUTED:
- ret = process_subn(ibdev, mad_flags, port_num,
- in_mad, out_mad);
- goto bail;
- case IB_MGMT_CLASS_PERF_MGMT:
- ret = process_perf(ibdev, port_num, in_mad, out_mad);
- goto bail;
- default:
- ret = IB_MAD_RESULT_SUCCESS;
- }
-
-bail:
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/module.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <asm/pgtable.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_release_mmap_info - free mmap info structure
- * @ref: a pointer to the kref within struct ipath_mmap_info
- */
-void ipath_release_mmap_info(struct kref *ref)
-{
- struct ipath_mmap_info *ip =
- container_of(ref, struct ipath_mmap_info, ref);
- struct ipath_ibdev *dev = to_idev(ip->context->device);
-
- spin_lock_irq(&dev->pending_lock);
- list_del(&ip->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
-
- vfree(ip->obj);
- kfree(ip);
-}
-
-/*
- * open and close keep track of how many times the CQ is mapped,
- * to avoid releasing it.
- */
-static void ipath_vma_open(struct vm_area_struct *vma)
-{
- struct ipath_mmap_info *ip = vma->vm_private_data;
-
- kref_get(&ip->ref);
-}
-
-static void ipath_vma_close(struct vm_area_struct *vma)
-{
- struct ipath_mmap_info *ip = vma->vm_private_data;
-
- kref_put(&ip->ref, ipath_release_mmap_info);
-}
-
-static const struct vm_operations_struct ipath_vm_ops = {
- .open = ipath_vma_open,
- .close = ipath_vma_close,
-};
-
-/**
- * ipath_mmap - create a new mmap region
- * @context: the IB user context of the process making the mmap() call
- * @vma: the VMA to be initialized
- * Return zero if the mmap is OK. Otherwise, return an errno.
- */
-int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
-{
- struct ipath_ibdev *dev = to_idev(context->device);
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
- unsigned long size = vma->vm_end - vma->vm_start;
- struct ipath_mmap_info *ip, *pp;
- int ret = -EINVAL;
-
- /*
- * Search the device's list of objects waiting for a mmap call.
- * Normally, this list is very short since a call to create a
- * CQ, QP, or SRQ is soon followed by a call to mmap().
- */
- spin_lock_irq(&dev->pending_lock);
- list_for_each_entry_safe(ip, pp, &dev->pending_mmaps,
- pending_mmaps) {
- /* Only the creator is allowed to mmap the object */
- if (context != ip->context || (__u64) offset != ip->offset)
- continue;
- /* Don't allow a mmap larger than the object. */
- if (size > ip->size)
- break;
-
- list_del_init(&ip->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
-
- ret = remap_vmalloc_range(vma, ip->obj, 0);
- if (ret)
- goto done;
- vma->vm_ops = &ipath_vm_ops;
- vma->vm_private_data = ip;
- ipath_vma_open(vma);
- goto done;
- }
- spin_unlock_irq(&dev->pending_lock);
-done:
- return ret;
-}
-
-/*
- * Allocate information for ipath_mmap
- */
-struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
- u32 size,
- struct ib_ucontext *context,
- void *obj) {
- struct ipath_mmap_info *ip;
-
- ip = kmalloc(sizeof *ip, GFP_KERNEL);
- if (!ip)
- goto bail;
-
- size = PAGE_ALIGN(size);
-
- spin_lock_irq(&dev->mmap_offset_lock);
- if (dev->mmap_offset == 0)
- dev->mmap_offset = PAGE_SIZE;
- ip->offset = dev->mmap_offset;
- dev->mmap_offset += size;
- spin_unlock_irq(&dev->mmap_offset_lock);
-
- INIT_LIST_HEAD(&ip->pending_mmaps);
- ip->size = size;
- ip->context = context;
- ip->obj = obj;
- kref_init(&ip->ref);
-
-bail:
- return ip;
-}
-
-void ipath_update_mmap_info(struct ipath_ibdev *dev,
- struct ipath_mmap_info *ip,
- u32 size, void *obj) {
- size = PAGE_ALIGN(size);
-
- spin_lock_irq(&dev->mmap_offset_lock);
- if (dev->mmap_offset == 0)
- dev->mmap_offset = PAGE_SIZE;
- ip->offset = dev->mmap_offset;
- dev->mmap_offset += size;
- spin_unlock_irq(&dev->mmap_offset_lock);
-
- ip->size = size;
- ip->obj = obj;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/slab.h>
-
-#include <rdma/ib_umem.h>
-#include <rdma/ib_pack.h>
-#include <rdma/ib_smi.h>
-
-#include "ipath_verbs.h"
-
-/* Fast memory region */
-struct ipath_fmr {
- struct ib_fmr ibfmr;
- u8 page_shift;
- struct ipath_mregion mr; /* must be last */
-};
-
-static inline struct ipath_fmr *to_ifmr(struct ib_fmr *ibfmr)
-{
- return container_of(ibfmr, struct ipath_fmr, ibfmr);
-}
-
-/**
- * ipath_get_dma_mr - get a DMA memory region
- * @pd: protection domain for this memory region
- * @acc: access flags
- *
- * Returns the memory region on success, otherwise returns an errno.
- * Note that all DMA addresses should be created via the
- * struct ib_dma_mapping_ops functions (see ipath_dma.c).
- */
-struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc)
-{
- struct ipath_mr *mr;
- struct ib_mr *ret;
-
- mr = kzalloc(sizeof *mr, GFP_KERNEL);
- if (!mr) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- mr->mr.access_flags = acc;
- ret = &mr->ibmr;
-
-bail:
- return ret;
-}
-
-static struct ipath_mr *alloc_mr(int count,
- struct ipath_lkey_table *lk_table)
-{
- struct ipath_mr *mr;
- int m, i = 0;
-
- /* Allocate struct plus pointers to first level page tables. */
- m = (count + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
- mr = kmalloc(sizeof *mr + m * sizeof mr->mr.map[0], GFP_KERNEL);
- if (!mr)
- goto done;
-
- /* Allocate first level page tables. */
- for (; i < m; i++) {
- mr->mr.map[i] = kmalloc(sizeof *mr->mr.map[0], GFP_KERNEL);
- if (!mr->mr.map[i])
- goto bail;
- }
- mr->mr.mapsz = m;
-
- /*
- * ib_reg_phys_mr() will initialize mr->ibmr except for
- * lkey and rkey.
- */
- if (!ipath_alloc_lkey(lk_table, &mr->mr))
- goto bail;
- mr->ibmr.rkey = mr->ibmr.lkey = mr->mr.lkey;
-
- goto done;
-
-bail:
- while (i) {
- i--;
- kfree(mr->mr.map[i]);
- }
- kfree(mr);
- mr = NULL;
-
-done:
- return mr;
-}
-
-/**
- * ipath_reg_phys_mr - register a physical memory region
- * @pd: protection domain for this memory region
- * @buffer_list: pointer to the list of physical buffers to register
- * @num_phys_buf: the number of physical buffers to register
- * @iova_start: the starting address passed over IB which maps to this MR
- *
- * Returns the memory region on success, otherwise returns an errno.
- */
-struct ib_mr *ipath_reg_phys_mr(struct ib_pd *pd,
- struct ib_phys_buf *buffer_list,
- int num_phys_buf, int acc, u64 *iova_start)
-{
- struct ipath_mr *mr;
- int n, m, i;
- struct ib_mr *ret;
-
- mr = alloc_mr(num_phys_buf, &to_idev(pd->device)->lk_table);
- if (mr == NULL) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- mr->mr.pd = pd;
- mr->mr.user_base = *iova_start;
- mr->mr.iova = *iova_start;
- mr->mr.length = 0;
- mr->mr.offset = 0;
- mr->mr.access_flags = acc;
- mr->mr.max_segs = num_phys_buf;
- mr->umem = NULL;
-
- m = 0;
- n = 0;
- for (i = 0; i < num_phys_buf; i++) {
- mr->mr.map[m]->segs[n].vaddr = (void *) buffer_list[i].addr;
- mr->mr.map[m]->segs[n].length = buffer_list[i].size;
- mr->mr.length += buffer_list[i].size;
- n++;
- if (n == IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
-
- ret = &mr->ibmr;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_reg_user_mr - register a userspace memory region
- * @pd: protection domain for this memory region
- * @start: starting userspace address
- * @length: length of region to register
- * @virt_addr: virtual address to use (from HCA's point of view)
- * @mr_access_flags: access flags for this memory region
- * @udata: unused by the InfiniPath driver
- *
- * Returns the memory region on success, otherwise returns an errno.
- */
-struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
- u64 virt_addr, int mr_access_flags,
- struct ib_udata *udata)
-{
- struct ipath_mr *mr;
- struct ib_umem *umem;
- int n, m, entry;
- struct scatterlist *sg;
- struct ib_mr *ret;
-
- if (length == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- umem = ib_umem_get(pd->uobject->context, start, length,
- mr_access_flags, 0);
- if (IS_ERR(umem))
- return (void *) umem;
-
- n = umem->nmap;
- mr = alloc_mr(n, &to_idev(pd->device)->lk_table);
- if (!mr) {
- ret = ERR_PTR(-ENOMEM);
- ib_umem_release(umem);
- goto bail;
- }
-
- mr->mr.pd = pd;
- mr->mr.user_base = start;
- mr->mr.iova = virt_addr;
- mr->mr.length = length;
- mr->mr.offset = ib_umem_offset(umem);
- mr->mr.access_flags = mr_access_flags;
- mr->mr.max_segs = n;
- mr->umem = umem;
-
- m = 0;
- n = 0;
- for_each_sg(umem->sg_head.sgl, sg, umem->nmap, entry) {
- void *vaddr;
-
- vaddr = page_address(sg_page(sg));
- if (!vaddr) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- mr->mr.map[m]->segs[n].vaddr = vaddr;
- mr->mr.map[m]->segs[n].length = umem->page_size;
- n++;
- if (n == IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- ret = &mr->ibmr;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_dereg_mr - unregister and free a memory region
- * @ibmr: the memory region to free
- *
- * Returns 0 on success.
- *
- * Note that this is called to free MRs created by ipath_get_dma_mr()
- * or ipath_reg_user_mr().
- */
-int ipath_dereg_mr(struct ib_mr *ibmr)
-{
- struct ipath_mr *mr = to_imr(ibmr);
- int i;
-
- ipath_free_lkey(&to_idev(ibmr->device)->lk_table, ibmr->lkey);
- i = mr->mr.mapsz;
- while (i) {
- i--;
- kfree(mr->mr.map[i]);
- }
-
- if (mr->umem)
- ib_umem_release(mr->umem);
-
- kfree(mr);
- return 0;
-}
-
-/**
- * ipath_alloc_fmr - allocate a fast memory region
- * @pd: the protection domain for this memory region
- * @mr_access_flags: access flags for this memory region
- * @fmr_attr: fast memory region attributes
- *
- * Returns the memory region on success, otherwise returns an errno.
- */
-struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
- struct ib_fmr_attr *fmr_attr)
-{
- struct ipath_fmr *fmr;
- int m, i = 0;
- struct ib_fmr *ret;
-
- /* Allocate struct plus pointers to first level page tables. */
- m = (fmr_attr->max_pages + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
- fmr = kmalloc(sizeof *fmr + m * sizeof fmr->mr.map[0], GFP_KERNEL);
- if (!fmr)
- goto bail;
-
- /* Allocate first level page tables. */
- for (; i < m; i++) {
- fmr->mr.map[i] = kmalloc(sizeof *fmr->mr.map[0],
- GFP_KERNEL);
- if (!fmr->mr.map[i])
- goto bail;
- }
- fmr->mr.mapsz = m;
-
- /*
- * ib_alloc_fmr() will initialize fmr->ibfmr except for lkey &
- * rkey.
- */
- if (!ipath_alloc_lkey(&to_idev(pd->device)->lk_table, &fmr->mr))
- goto bail;
- fmr->ibfmr.rkey = fmr->ibfmr.lkey = fmr->mr.lkey;
- /*
- * Resources are allocated but no valid mapping (RKEY can't be
- * used).
- */
- fmr->mr.pd = pd;
- fmr->mr.user_base = 0;
- fmr->mr.iova = 0;
- fmr->mr.length = 0;
- fmr->mr.offset = 0;
- fmr->mr.access_flags = mr_access_flags;
- fmr->mr.max_segs = fmr_attr->max_pages;
- fmr->page_shift = fmr_attr->page_shift;
-
- ret = &fmr->ibfmr;
- goto done;
-
-bail:
- while (i)
- kfree(fmr->mr.map[--i]);
- kfree(fmr);
- ret = ERR_PTR(-ENOMEM);
-
-done:
- return ret;
-}
-
-/**
- * ipath_map_phys_fmr - set up a fast memory region
- * @ibmfr: the fast memory region to set up
- * @page_list: the list of pages to associate with the fast memory region
- * @list_len: the number of pages to associate with the fast memory region
- * @iova: the virtual address of the start of the fast memory region
- *
- * This may be called from interrupt context.
- */
-
-int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
- int list_len, u64 iova)
-{
- struct ipath_fmr *fmr = to_ifmr(ibfmr);
- struct ipath_lkey_table *rkt;
- unsigned long flags;
- int m, n, i;
- u32 ps;
- int ret;
-
- if (list_len > fmr->mr.max_segs) {
- ret = -EINVAL;
- goto bail;
- }
- rkt = &to_idev(ibfmr->device)->lk_table;
- spin_lock_irqsave(&rkt->lock, flags);
- fmr->mr.user_base = iova;
- fmr->mr.iova = iova;
- ps = 1 << fmr->page_shift;
- fmr->mr.length = list_len * ps;
- m = 0;
- n = 0;
- ps = 1 << fmr->page_shift;
- for (i = 0; i < list_len; i++) {
- fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i];
- fmr->mr.map[m]->segs[n].length = ps;
- if (++n == IPATH_SEGSZ) {
- m++;
- n = 0;
- }
- }
- spin_unlock_irqrestore(&rkt->lock, flags);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_unmap_fmr - unmap fast memory regions
- * @fmr_list: the list of fast memory regions to unmap
- *
- * Returns 0 on success.
- */
-int ipath_unmap_fmr(struct list_head *fmr_list)
-{
- struct ipath_fmr *fmr;
- struct ipath_lkey_table *rkt;
- unsigned long flags;
-
- list_for_each_entry(fmr, fmr_list, ibfmr.list) {
- rkt = &to_idev(fmr->ibfmr.device)->lk_table;
- spin_lock_irqsave(&rkt->lock, flags);
- fmr->mr.user_base = 0;
- fmr->mr.iova = 0;
- fmr->mr.length = 0;
- spin_unlock_irqrestore(&rkt->lock, flags);
- }
- return 0;
-}
-
-/**
- * ipath_dealloc_fmr - deallocate a fast memory region
- * @ibfmr: the fast memory region to deallocate
- *
- * Returns 0 on success.
- */
-int ipath_dealloc_fmr(struct ib_fmr *ibfmr)
-{
- struct ipath_fmr *fmr = to_ifmr(ibfmr);
- int i;
-
- ipath_free_lkey(&to_idev(ibfmr->device)->lk_table, ibfmr->lkey);
- i = fmr->mr.mapsz;
- while (i)
- kfree(fmr->mr.map[--i]);
- kfree(fmr);
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE)
-#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1)
-#define mk_qpn(qpt, map, off) (((map) - (qpt)->map) * BITS_PER_PAGE + \
- (off))
-#define find_next_offset(map, off) find_next_zero_bit((map)->page, \
- BITS_PER_PAGE, off)
-
-/*
- * Convert the AETH credit code into the number of credits.
- */
-static u32 credit_table[31] = {
- 0, /* 0 */
- 1, /* 1 */
- 2, /* 2 */
- 3, /* 3 */
- 4, /* 4 */
- 6, /* 5 */
- 8, /* 6 */
- 12, /* 7 */
- 16, /* 8 */
- 24, /* 9 */
- 32, /* A */
- 48, /* B */
- 64, /* C */
- 96, /* D */
- 128, /* E */
- 192, /* F */
- 256, /* 10 */
- 384, /* 11 */
- 512, /* 12 */
- 768, /* 13 */
- 1024, /* 14 */
- 1536, /* 15 */
- 2048, /* 16 */
- 3072, /* 17 */
- 4096, /* 18 */
- 6144, /* 19 */
- 8192, /* 1A */
- 12288, /* 1B */
- 16384, /* 1C */
- 24576, /* 1D */
- 32768 /* 1E */
-};
-
-
-static void get_map_page(struct ipath_qp_table *qpt, struct qpn_map *map)
-{
- unsigned long page = get_zeroed_page(GFP_KERNEL);
- unsigned long flags;
-
- /*
- * Free the page if someone raced with us installing it.
- */
-
- spin_lock_irqsave(&qpt->lock, flags);
- if (map->page)
- free_page(page);
- else
- map->page = (void *)page;
- spin_unlock_irqrestore(&qpt->lock, flags);
-}
-
-
-static int alloc_qpn(struct ipath_qp_table *qpt, enum ib_qp_type type)
-{
- u32 i, offset, max_scan, qpn;
- struct qpn_map *map;
- u32 ret = -1;
-
- if (type == IB_QPT_SMI)
- ret = 0;
- else if (type == IB_QPT_GSI)
- ret = 1;
-
- if (ret != -1) {
- map = &qpt->map[0];
- if (unlikely(!map->page)) {
- get_map_page(qpt, map);
- if (unlikely(!map->page)) {
- ret = -ENOMEM;
- goto bail;
- }
- }
- if (!test_and_set_bit(ret, map->page))
- atomic_dec(&map->n_free);
- else
- ret = -EBUSY;
- goto bail;
- }
-
- qpn = qpt->last + 1;
- if (qpn >= QPN_MAX)
- qpn = 2;
- offset = qpn & BITS_PER_PAGE_MASK;
- map = &qpt->map[qpn / BITS_PER_PAGE];
- max_scan = qpt->nmaps - !offset;
- for (i = 0;;) {
- if (unlikely(!map->page)) {
- get_map_page(qpt, map);
- if (unlikely(!map->page))
- break;
- }
- if (likely(atomic_read(&map->n_free))) {
- do {
- if (!test_and_set_bit(offset, map->page)) {
- atomic_dec(&map->n_free);
- qpt->last = qpn;
- ret = qpn;
- goto bail;
- }
- offset = find_next_offset(map, offset);
- qpn = mk_qpn(qpt, map, offset);
- /*
- * This test differs from alloc_pidmap().
- * If find_next_offset() does find a zero
- * bit, we don't need to check for QPN
- * wrapping around past our starting QPN.
- * We just need to be sure we don't loop
- * forever.
- */
- } while (offset < BITS_PER_PAGE && qpn < QPN_MAX);
- }
- /*
- * In order to keep the number of pages allocated to a
- * minimum, we scan the all existing pages before increasing
- * the size of the bitmap table.
- */
- if (++i > max_scan) {
- if (qpt->nmaps == QPNMAP_ENTRIES)
- break;
- map = &qpt->map[qpt->nmaps++];
- offset = 0;
- } else if (map < &qpt->map[qpt->nmaps]) {
- ++map;
- offset = 0;
- } else {
- map = &qpt->map[0];
- offset = 2;
- }
- qpn = mk_qpn(qpt, map, offset);
- }
-
- ret = -ENOMEM;
-
-bail:
- return ret;
-}
-
-static void free_qpn(struct ipath_qp_table *qpt, u32 qpn)
-{
- struct qpn_map *map;
-
- map = qpt->map + qpn / BITS_PER_PAGE;
- if (map->page)
- clear_bit(qpn & BITS_PER_PAGE_MASK, map->page);
- atomic_inc(&map->n_free);
-}
-
-/**
- * ipath_alloc_qpn - allocate a QP number
- * @qpt: the QP table
- * @qp: the QP
- * @type: the QP type (IB_QPT_SMI and IB_QPT_GSI are special)
- *
- * Allocate the next available QPN and put the QP into the hash table.
- * The hash table holds a reference to the QP.
- */
-static int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
- enum ib_qp_type type)
-{
- unsigned long flags;
- int ret;
-
- ret = alloc_qpn(qpt, type);
- if (ret < 0)
- goto bail;
- qp->ibqp.qp_num = ret;
-
- /* Add the QP to the hash table. */
- spin_lock_irqsave(&qpt->lock, flags);
-
- ret %= qpt->max;
- qp->next = qpt->table[ret];
- qpt->table[ret] = qp;
- atomic_inc(&qp->refcount);
-
- spin_unlock_irqrestore(&qpt->lock, flags);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_free_qp - remove a QP from the QP table
- * @qpt: the QP table
- * @qp: the QP to remove
- *
- * Remove the QP from the table so it can't be found asynchronously by
- * the receive interrupt routine.
- */
-static void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
-{
- struct ipath_qp *q, **qpp;
- unsigned long flags;
-
- spin_lock_irqsave(&qpt->lock, flags);
-
- /* Remove QP from the hash table. */
- qpp = &qpt->table[qp->ibqp.qp_num % qpt->max];
- for (; (q = *qpp) != NULL; qpp = &q->next) {
- if (q == qp) {
- *qpp = qp->next;
- qp->next = NULL;
- atomic_dec(&qp->refcount);
- break;
- }
- }
-
- spin_unlock_irqrestore(&qpt->lock, flags);
-}
-
-/**
- * ipath_free_all_qps - check for QPs still in use
- * @qpt: the QP table to empty
- *
- * There should not be any QPs still in use.
- * Free memory for table.
- */
-unsigned ipath_free_all_qps(struct ipath_qp_table *qpt)
-{
- unsigned long flags;
- struct ipath_qp *qp;
- u32 n, qp_inuse = 0;
-
- spin_lock_irqsave(&qpt->lock, flags);
- for (n = 0; n < qpt->max; n++) {
- qp = qpt->table[n];
- qpt->table[n] = NULL;
-
- for (; qp; qp = qp->next)
- qp_inuse++;
- }
- spin_unlock_irqrestore(&qpt->lock, flags);
-
- for (n = 0; n < ARRAY_SIZE(qpt->map); n++)
- if (qpt->map[n].page)
- free_page((unsigned long) qpt->map[n].page);
- return qp_inuse;
-}
-
-/**
- * ipath_lookup_qpn - return the QP with the given QPN
- * @qpt: the QP table
- * @qpn: the QP number to look up
- *
- * The caller is responsible for decrementing the QP reference count
- * when done.
- */
-struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn)
-{
- unsigned long flags;
- struct ipath_qp *qp;
-
- spin_lock_irqsave(&qpt->lock, flags);
-
- for (qp = qpt->table[qpn % qpt->max]; qp; qp = qp->next) {
- if (qp->ibqp.qp_num == qpn) {
- atomic_inc(&qp->refcount);
- break;
- }
- }
-
- spin_unlock_irqrestore(&qpt->lock, flags);
- return qp;
-}
-
-/**
- * ipath_reset_qp - initialize the QP state to the reset state
- * @qp: the QP to reset
- * @type: the QP type
- */
-static void ipath_reset_qp(struct ipath_qp *qp, enum ib_qp_type type)
-{
- qp->remote_qpn = 0;
- qp->qkey = 0;
- qp->qp_access_flags = 0;
- atomic_set(&qp->s_dma_busy, 0);
- qp->s_flags &= IPATH_S_SIGNAL_REQ_WR;
- qp->s_hdrwords = 0;
- qp->s_wqe = NULL;
- qp->s_pkt_delay = 0;
- qp->s_draining = 0;
- qp->s_psn = 0;
- qp->r_psn = 0;
- qp->r_msn = 0;
- if (type == IB_QPT_RC) {
- qp->s_state = IB_OPCODE_RC_SEND_LAST;
- qp->r_state = IB_OPCODE_RC_SEND_LAST;
- } else {
- qp->s_state = IB_OPCODE_UC_SEND_LAST;
- qp->r_state = IB_OPCODE_UC_SEND_LAST;
- }
- qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
- qp->r_nak_state = 0;
- qp->r_aflags = 0;
- qp->r_flags = 0;
- qp->s_rnr_timeout = 0;
- qp->s_head = 0;
- qp->s_tail = 0;
- qp->s_cur = 0;
- qp->s_last = 0;
- qp->s_ssn = 1;
- qp->s_lsn = 0;
- memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue));
- qp->r_head_ack_queue = 0;
- qp->s_tail_ack_queue = 0;
- qp->s_num_rd_atomic = 0;
- if (qp->r_rq.wq) {
- qp->r_rq.wq->head = 0;
- qp->r_rq.wq->tail = 0;
- }
-}
-
-/**
- * ipath_error_qp - put a QP into the error state
- * @qp: the QP to put into the error state
- * @err: the receive completion error to signal if a RWQE is active
- *
- * Flushes both send and receive work queues.
- * Returns true if last WQE event should be generated.
- * The QP s_lock should be held and interrupts disabled.
- * If we are already in error state, just return.
- */
-
-int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ib_wc wc;
- int ret = 0;
-
- if (qp->state == IB_QPS_ERR)
- goto bail;
-
- qp->state = IB_QPS_ERR;
-
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
-
- /* Schedule the sending tasklet to drain the send work queue. */
- if (qp->s_last != qp->s_head)
- ipath_schedule_send(qp);
-
- memset(&wc, 0, sizeof(wc));
- wc.qp = &qp->ibqp;
- wc.opcode = IB_WC_RECV;
-
- if (test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags)) {
- wc.wr_id = qp->r_wr_id;
- wc.status = err;
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- }
- wc.status = IB_WC_WR_FLUSH_ERR;
-
- if (qp->r_rq.wq) {
- struct ipath_rwq *wq;
- u32 head;
- u32 tail;
-
- spin_lock(&qp->r_rq.lock);
-
- /* sanity check pointers before trusting them */
- wq = qp->r_rq.wq;
- head = wq->head;
- if (head >= qp->r_rq.size)
- head = 0;
- tail = wq->tail;
- if (tail >= qp->r_rq.size)
- tail = 0;
- while (tail != head) {
- wc.wr_id = get_rwqe_ptr(&qp->r_rq, tail)->wr_id;
- if (++tail >= qp->r_rq.size)
- tail = 0;
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- }
- wq->tail = tail;
-
- spin_unlock(&qp->r_rq.lock);
- } else if (qp->ibqp.event_handler)
- ret = 1;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_modify_qp - modify the attributes of a queue pair
- * @ibqp: the queue pair who's attributes we're modifying
- * @attr: the new attributes
- * @attr_mask: the mask of attributes to modify
- * @udata: user data for ipathverbs.so
- *
- * Returns 0 on success, otherwise returns an errno.
- */
-int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_qp *qp = to_iqp(ibqp);
- enum ib_qp_state cur_state, new_state;
- int lastwqe = 0;
- int ret;
-
- spin_lock_irq(&qp->s_lock);
-
- cur_state = attr_mask & IB_QP_CUR_STATE ?
- attr->cur_qp_state : qp->state;
- new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
-
- if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type,
- attr_mask, IB_LINK_LAYER_UNSPECIFIED))
- goto inval;
-
- if (attr_mask & IB_QP_AV) {
- if (attr->ah_attr.dlid == 0 ||
- attr->ah_attr.dlid >= IPATH_MULTICAST_LID_BASE)
- goto inval;
-
- if ((attr->ah_attr.ah_flags & IB_AH_GRH) &&
- (attr->ah_attr.grh.sgid_index > 1))
- goto inval;
- }
-
- if (attr_mask & IB_QP_PKEY_INDEX)
- if (attr->pkey_index >= ipath_get_npkeys(dev->dd))
- goto inval;
-
- if (attr_mask & IB_QP_MIN_RNR_TIMER)
- if (attr->min_rnr_timer > 31)
- goto inval;
-
- if (attr_mask & IB_QP_PORT)
- if (attr->port_num == 0 ||
- attr->port_num > ibqp->device->phys_port_cnt)
- goto inval;
-
- /*
- * don't allow invalid Path MTU values or greater than 2048
- * unless we are configured for a 4KB MTU
- */
- if ((attr_mask & IB_QP_PATH_MTU) &&
- (ib_mtu_enum_to_int(attr->path_mtu) == -1 ||
- (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096)))
- goto inval;
-
- if (attr_mask & IB_QP_PATH_MIG_STATE)
- if (attr->path_mig_state != IB_MIG_MIGRATED &&
- attr->path_mig_state != IB_MIG_REARM)
- goto inval;
-
- if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
- if (attr->max_dest_rd_atomic > IPATH_MAX_RDMA_ATOMIC)
- goto inval;
-
- switch (new_state) {
- case IB_QPS_RESET:
- if (qp->state != IB_QPS_RESET) {
- qp->state = IB_QPS_RESET;
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- spin_unlock_irq(&qp->s_lock);
- /* Stop the sending tasklet */
- tasklet_kill(&qp->s_task);
- wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
- spin_lock_irq(&qp->s_lock);
- }
- ipath_reset_qp(qp, ibqp->qp_type);
- break;
-
- case IB_QPS_SQD:
- qp->s_draining = qp->s_last != qp->s_cur;
- qp->state = new_state;
- break;
-
- case IB_QPS_SQE:
- if (qp->ibqp.qp_type == IB_QPT_RC)
- goto inval;
- qp->state = new_state;
- break;
-
- case IB_QPS_ERR:
- lastwqe = ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- break;
-
- default:
- qp->state = new_state;
- break;
- }
-
- if (attr_mask & IB_QP_PKEY_INDEX)
- qp->s_pkey_index = attr->pkey_index;
-
- if (attr_mask & IB_QP_DEST_QPN)
- qp->remote_qpn = attr->dest_qp_num;
-
- if (attr_mask & IB_QP_SQ_PSN) {
- qp->s_psn = qp->s_next_psn = attr->sq_psn;
- qp->s_last_psn = qp->s_next_psn - 1;
- }
-
- if (attr_mask & IB_QP_RQ_PSN)
- qp->r_psn = attr->rq_psn;
-
- if (attr_mask & IB_QP_ACCESS_FLAGS)
- qp->qp_access_flags = attr->qp_access_flags;
-
- if (attr_mask & IB_QP_AV) {
- qp->remote_ah_attr = attr->ah_attr;
- qp->s_dmult = ipath_ib_rate_to_mult(attr->ah_attr.static_rate);
- }
-
- if (attr_mask & IB_QP_PATH_MTU)
- qp->path_mtu = attr->path_mtu;
-
- if (attr_mask & IB_QP_RETRY_CNT)
- qp->s_retry = qp->s_retry_cnt = attr->retry_cnt;
-
- if (attr_mask & IB_QP_RNR_RETRY) {
- qp->s_rnr_retry = attr->rnr_retry;
- if (qp->s_rnr_retry > 7)
- qp->s_rnr_retry = 7;
- qp->s_rnr_retry_cnt = qp->s_rnr_retry;
- }
-
- if (attr_mask & IB_QP_MIN_RNR_TIMER)
- qp->r_min_rnr_timer = attr->min_rnr_timer;
-
- if (attr_mask & IB_QP_TIMEOUT)
- qp->timeout = attr->timeout;
-
- if (attr_mask & IB_QP_QKEY)
- qp->qkey = attr->qkey;
-
- if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
- qp->r_max_rd_atomic = attr->max_dest_rd_atomic;
-
- if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
- qp->s_max_rd_atomic = attr->max_rd_atomic;
-
- spin_unlock_irq(&qp->s_lock);
-
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = qp->ibqp.device;
- ev.element.qp = &qp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
- }
- ret = 0;
- goto bail;
-
-inval:
- spin_unlock_irq(&qp->s_lock);
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_qp_init_attr *init_attr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
-
- attr->qp_state = qp->state;
- attr->cur_qp_state = attr->qp_state;
- attr->path_mtu = qp->path_mtu;
- attr->path_mig_state = 0;
- attr->qkey = qp->qkey;
- attr->rq_psn = qp->r_psn;
- attr->sq_psn = qp->s_next_psn;
- attr->dest_qp_num = qp->remote_qpn;
- attr->qp_access_flags = qp->qp_access_flags;
- attr->cap.max_send_wr = qp->s_size - 1;
- attr->cap.max_recv_wr = qp->ibqp.srq ? 0 : qp->r_rq.size - 1;
- attr->cap.max_send_sge = qp->s_max_sge;
- attr->cap.max_recv_sge = qp->r_rq.max_sge;
- attr->cap.max_inline_data = 0;
- attr->ah_attr = qp->remote_ah_attr;
- memset(&attr->alt_ah_attr, 0, sizeof(attr->alt_ah_attr));
- attr->pkey_index = qp->s_pkey_index;
- attr->alt_pkey_index = 0;
- attr->en_sqd_async_notify = 0;
- attr->sq_draining = qp->s_draining;
- attr->max_rd_atomic = qp->s_max_rd_atomic;
- attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
- attr->min_rnr_timer = qp->r_min_rnr_timer;
- attr->port_num = 1;
- attr->timeout = qp->timeout;
- attr->retry_cnt = qp->s_retry_cnt;
- attr->rnr_retry = qp->s_rnr_retry_cnt;
- attr->alt_port_num = 0;
- attr->alt_timeout = 0;
-
- init_attr->event_handler = qp->ibqp.event_handler;
- init_attr->qp_context = qp->ibqp.qp_context;
- init_attr->send_cq = qp->ibqp.send_cq;
- init_attr->recv_cq = qp->ibqp.recv_cq;
- init_attr->srq = qp->ibqp.srq;
- init_attr->cap = attr->cap;
- if (qp->s_flags & IPATH_S_SIGNAL_REQ_WR)
- init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
- else
- init_attr->sq_sig_type = IB_SIGNAL_ALL_WR;
- init_attr->qp_type = qp->ibqp.qp_type;
- init_attr->port_num = 1;
- return 0;
-}
-
-/**
- * ipath_compute_aeth - compute the AETH (syndrome + MSN)
- * @qp: the queue pair to compute the AETH for
- *
- * Returns the AETH.
- */
-__be32 ipath_compute_aeth(struct ipath_qp *qp)
-{
- u32 aeth = qp->r_msn & IPATH_MSN_MASK;
-
- if (qp->ibqp.srq) {
- /*
- * Shared receive queues don't generate credits.
- * Set the credit field to the invalid value.
- */
- aeth |= IPATH_AETH_CREDIT_INVAL << IPATH_AETH_CREDIT_SHIFT;
- } else {
- u32 min, max, x;
- u32 credits;
- struct ipath_rwq *wq = qp->r_rq.wq;
- u32 head;
- u32 tail;
-
- /* sanity check pointers before trusting them */
- head = wq->head;
- if (head >= qp->r_rq.size)
- head = 0;
- tail = wq->tail;
- if (tail >= qp->r_rq.size)
- tail = 0;
- /*
- * Compute the number of credits available (RWQEs).
- * XXX Not holding the r_rq.lock here so there is a small
- * chance that the pair of reads are not atomic.
- */
- credits = head - tail;
- if ((int)credits < 0)
- credits += qp->r_rq.size;
- /*
- * Binary search the credit table to find the code to
- * use.
- */
- min = 0;
- max = 31;
- for (;;) {
- x = (min + max) / 2;
- if (credit_table[x] == credits)
- break;
- if (credit_table[x] > credits)
- max = x;
- else if (min == x)
- break;
- else
- min = x;
- }
- aeth |= x << IPATH_AETH_CREDIT_SHIFT;
- }
- return cpu_to_be32(aeth);
-}
-
-/**
- * ipath_create_qp - create a queue pair for a device
- * @ibpd: the protection domain who's device we create the queue pair for
- * @init_attr: the attributes of the queue pair
- * @udata: unused by InfiniPath
- *
- * Returns the queue pair on success, otherwise returns an errno.
- *
- * Called by the ib_create_qp() core verbs function.
- */
-struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
- struct ib_qp_init_attr *init_attr,
- struct ib_udata *udata)
-{
- struct ipath_qp *qp;
- int err;
- struct ipath_swqe *swq = NULL;
- struct ipath_ibdev *dev;
- size_t sz;
- size_t sg_list_sz;
- struct ib_qp *ret;
-
- if (init_attr->create_flags) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
- init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- /* Check receive queue parameters if no SRQ is specified. */
- if (!init_attr->srq) {
- if (init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
- init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- if (init_attr->cap.max_send_sge +
- init_attr->cap.max_send_wr +
- init_attr->cap.max_recv_sge +
- init_attr->cap.max_recv_wr == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
- }
-
- switch (init_attr->qp_type) {
- case IB_QPT_UC:
- case IB_QPT_RC:
- case IB_QPT_UD:
- case IB_QPT_SMI:
- case IB_QPT_GSI:
- sz = sizeof(struct ipath_sge) *
- init_attr->cap.max_send_sge +
- sizeof(struct ipath_swqe);
- swq = vmalloc((init_attr->cap.max_send_wr + 1) * sz);
- if (swq == NULL) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
- sz = sizeof(*qp);
- sg_list_sz = 0;
- if (init_attr->srq) {
- struct ipath_srq *srq = to_isrq(init_attr->srq);
-
- if (srq->rq.max_sge > 1)
- sg_list_sz = sizeof(*qp->r_sg_list) *
- (srq->rq.max_sge - 1);
- } else if (init_attr->cap.max_recv_sge > 1)
- sg_list_sz = sizeof(*qp->r_sg_list) *
- (init_attr->cap.max_recv_sge - 1);
- qp = kmalloc(sz + sg_list_sz, GFP_KERNEL);
- if (!qp) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_swq;
- }
- if (sg_list_sz && (init_attr->qp_type == IB_QPT_UD ||
- init_attr->qp_type == IB_QPT_SMI ||
- init_attr->qp_type == IB_QPT_GSI)) {
- qp->r_ud_sg_list = kmalloc(sg_list_sz, GFP_KERNEL);
- if (!qp->r_ud_sg_list) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_qp;
- }
- } else
- qp->r_ud_sg_list = NULL;
- if (init_attr->srq) {
- sz = 0;
- qp->r_rq.size = 0;
- qp->r_rq.max_sge = 0;
- qp->r_rq.wq = NULL;
- init_attr->cap.max_recv_wr = 0;
- init_attr->cap.max_recv_sge = 0;
- } else {
- qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
- qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
- sz = (sizeof(struct ib_sge) * qp->r_rq.max_sge) +
- sizeof(struct ipath_rwqe);
- qp->r_rq.wq = vmalloc_user(sizeof(struct ipath_rwq) +
- qp->r_rq.size * sz);
- if (!qp->r_rq.wq) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_sg_list;
- }
- }
-
- /*
- * ib_create_qp() will initialize qp->ibqp
- * except for qp->ibqp.qp_num.
- */
- spin_lock_init(&qp->s_lock);
- spin_lock_init(&qp->r_rq.lock);
- atomic_set(&qp->refcount, 0);
- init_waitqueue_head(&qp->wait);
- init_waitqueue_head(&qp->wait_dma);
- tasklet_init(&qp->s_task, ipath_do_send, (unsigned long)qp);
- INIT_LIST_HEAD(&qp->piowait);
- INIT_LIST_HEAD(&qp->timerwait);
- qp->state = IB_QPS_RESET;
- qp->s_wq = swq;
- qp->s_size = init_attr->cap.max_send_wr + 1;
- qp->s_max_sge = init_attr->cap.max_send_sge;
- if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR)
- qp->s_flags = IPATH_S_SIGNAL_REQ_WR;
- else
- qp->s_flags = 0;
- dev = to_idev(ibpd->device);
- err = ipath_alloc_qpn(&dev->qp_table, qp,
- init_attr->qp_type);
- if (err) {
- ret = ERR_PTR(err);
- vfree(qp->r_rq.wq);
- goto bail_sg_list;
- }
- qp->ip = NULL;
- qp->s_tx = NULL;
- ipath_reset_qp(qp, init_attr->qp_type);
- break;
-
- default:
- /* Don't support raw QPs */
- ret = ERR_PTR(-ENOSYS);
- goto bail;
- }
-
- init_attr->cap.max_inline_data = 0;
-
- /*
- * Return the address of the RWQ as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- if (!qp->r_rq.wq) {
- __u64 offset = 0;
-
- err = ib_copy_to_udata(udata, &offset,
- sizeof(offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else {
- u32 s = sizeof(struct ipath_rwq) +
- qp->r_rq.size * sz;
-
- qp->ip =
- ipath_create_mmap_info(dev, s,
- ibpd->uobject->context,
- qp->r_rq.wq);
- if (!qp->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- err = ib_copy_to_udata(udata, &(qp->ip->offset),
- sizeof(qp->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- }
- }
-
- spin_lock(&dev->n_qps_lock);
- if (dev->n_qps_allocated == ib_ipath_max_qps) {
- spin_unlock(&dev->n_qps_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_qps_allocated++;
- spin_unlock(&dev->n_qps_lock);
-
- if (qp->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&qp->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = &qp->ibqp;
- goto bail;
-
-bail_ip:
- if (qp->ip)
- kref_put(&qp->ip->ref, ipath_release_mmap_info);
- else
- vfree(qp->r_rq.wq);
- ipath_free_qp(&dev->qp_table, qp);
- free_qpn(&dev->qp_table, qp->ibqp.qp_num);
-bail_sg_list:
- kfree(qp->r_ud_sg_list);
-bail_qp:
- kfree(qp);
-bail_swq:
- vfree(swq);
-bail:
- return ret;
-}
-
-/**
- * ipath_destroy_qp - destroy a queue pair
- * @ibqp: the queue pair to destroy
- *
- * Returns 0 on success.
- *
- * Note that this can be called while the QP is actively sending or
- * receiving!
- */
-int ipath_destroy_qp(struct ib_qp *ibqp)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
-
- /* Make sure HW and driver activity is stopped. */
- spin_lock_irq(&qp->s_lock);
- if (qp->state != IB_QPS_RESET) {
- qp->state = IB_QPS_RESET;
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- spin_unlock_irq(&qp->s_lock);
- /* Stop the sending tasklet */
- tasklet_kill(&qp->s_task);
- wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
- } else
- spin_unlock_irq(&qp->s_lock);
-
- ipath_free_qp(&dev->qp_table, qp);
-
- if (qp->s_tx) {
- atomic_dec(&qp->refcount);
- if (qp->s_tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
- kfree(qp->s_tx->txreq.map_addr);
- spin_lock_irq(&dev->pending_lock);
- list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
- spin_unlock_irq(&dev->pending_lock);
- qp->s_tx = NULL;
- }
-
- wait_event(qp->wait, !atomic_read(&qp->refcount));
-
- /* all user's cleaned up, mark it available */
- free_qpn(&dev->qp_table, qp->ibqp.qp_num);
- spin_lock(&dev->n_qps_lock);
- dev->n_qps_allocated--;
- spin_unlock(&dev->n_qps_lock);
-
- if (qp->ip)
- kref_put(&qp->ip->ref, ipath_release_mmap_info);
- else
- vfree(qp->r_rq.wq);
- kfree(qp->r_ud_sg_list);
- vfree(qp->s_wq);
- kfree(qp);
- return 0;
-}
-
-/**
- * ipath_init_qp_table - initialize the QP table for a device
- * @idev: the device who's QP table we're initializing
- * @size: the size of the QP table
- *
- * Returns 0 on success, otherwise returns an errno.
- */
-int ipath_init_qp_table(struct ipath_ibdev *idev, int size)
-{
- int i;
- int ret;
-
- idev->qp_table.last = 1; /* QPN 0 and 1 are special. */
- idev->qp_table.max = size;
- idev->qp_table.nmaps = 1;
- idev->qp_table.table = kzalloc(size * sizeof(*idev->qp_table.table),
- GFP_KERNEL);
- if (idev->qp_table.table == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- for (i = 0; i < ARRAY_SIZE(idev->qp_table.map); i++) {
- atomic_set(&idev->qp_table.map[i].n_free, BITS_PER_PAGE);
- idev->qp_table.map[i].page = NULL;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_get_credit - flush the send work queue of a QP
- * @qp: the qp who's send work queue to flush
- * @aeth: the Acknowledge Extended Transport Header
- *
- * The QP s_lock should be held.
- */
-void ipath_get_credit(struct ipath_qp *qp, u32 aeth)
-{
- u32 credit = (aeth >> IPATH_AETH_CREDIT_SHIFT) & IPATH_AETH_CREDIT_MASK;
-
- /*
- * If the credit is invalid, we can send
- * as many packets as we like. Otherwise, we have to
- * honor the credit field.
- */
- if (credit == IPATH_AETH_CREDIT_INVAL)
- qp->s_lsn = (u32) -1;
- else if (qp->s_lsn != (u32) -1) {
- /* Compute new LSN (i.e., MSN + credit) */
- credit = (aeth + credit_table[credit]) & IPATH_MSN_MASK;
- if (ipath_cmp24(credit, qp->s_lsn) > 0)
- qp->s_lsn = credit;
- }
-
- /* Restart sending if it was blocked due to lack of credits. */
- if ((qp->s_flags & IPATH_S_WAIT_SSN_CREDIT) &&
- qp->s_cur != qp->s_head &&
- (qp->s_lsn == (u32) -1 ||
- ipath_cmp24(get_swqe_ptr(qp, qp->s_cur)->ssn,
- qp->s_lsn + 1) <= 0))
- ipath_schedule_send(qp);
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/io.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/* cut down ridiculously long IB macro names */
-#define OP(x) IB_OPCODE_RC_##x
-
-static u32 restart_sge(struct ipath_sge_state *ss, struct ipath_swqe *wqe,
- u32 psn, u32 pmtu)
-{
- u32 len;
-
- len = ((psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
- ss->sge = wqe->sg_list[0];
- ss->sg_list = wqe->sg_list + 1;
- ss->num_sge = wqe->wr.num_sge;
- ipath_skip_sge(ss, len);
- return wqe->length - len;
-}
-
-/**
- * ipath_init_restart- initialize the qp->s_sge after a restart
- * @qp: the QP who's SGE we're restarting
- * @wqe: the work queue to initialize the QP's SGE from
- *
- * The QP s_lock should be held and interrupts disabled.
- */
-static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
-{
- struct ipath_ibdev *dev;
-
- qp->s_len = restart_sge(&qp->s_sge, wqe, qp->s_psn,
- ib_mtu_enum_to_int(qp->path_mtu));
- dev = to_idev(qp->ibqp.device);
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
-}
-
-/**
- * ipath_make_rc_ack - construct a response packet (ACK, NAK, or RDMA read)
- * @qp: a pointer to the QP
- * @ohdr: a pointer to the IB header being constructed
- * @pmtu: the path MTU
- *
- * Return 1 if constructed; otherwise, return 0.
- * Note that we are in the responder's side of the QP context.
- * Note the QP s_lock must be held.
- */
-static int ipath_make_rc_ack(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr, u32 pmtu)
-{
- struct ipath_ack_entry *e;
- u32 hwords;
- u32 len;
- u32 bth0;
- u32 bth2;
-
- /* Don't send an ACK if we aren't supposed to. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto bail;
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
-
- switch (qp->s_ack_state) {
- case OP(RDMA_READ_RESPONSE_LAST):
- case OP(RDMA_READ_RESPONSE_ONLY):
- case OP(ATOMIC_ACKNOWLEDGE):
- /*
- * We can increment the tail pointer now that the last
- * response has been sent instead of only being
- * constructed.
- */
- if (++qp->s_tail_ack_queue > IPATH_MAX_RDMA_ATOMIC)
- qp->s_tail_ack_queue = 0;
- /* FALLTHROUGH */
- case OP(SEND_ONLY):
- case OP(ACKNOWLEDGE):
- /* Check for no next entry in the queue. */
- if (qp->r_head_ack_queue == qp->s_tail_ack_queue) {
- if (qp->s_flags & IPATH_S_ACK_PENDING)
- goto normal;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- goto bail;
- }
-
- e = &qp->s_ack_queue[qp->s_tail_ack_queue];
- if (e->opcode == OP(RDMA_READ_REQUEST)) {
- /* Copy SGE state in case we need to resend */
- qp->s_ack_rdma_sge = e->rdma_sge;
- qp->s_cur_sge = &qp->s_ack_rdma_sge;
- len = e->rdma_sge.sge.sge_length;
- if (len > pmtu) {
- len = pmtu;
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_FIRST);
- } else {
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_ONLY);
- e->sent = 1;
- }
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- qp->s_ack_rdma_psn = e->psn;
- bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
- } else {
- /* COMPARE_SWAP or FETCH_ADD */
- qp->s_cur_sge = NULL;
- len = 0;
- qp->s_ack_state = OP(ATOMIC_ACKNOWLEDGE);
- ohdr->u.at.aeth = ipath_compute_aeth(qp);
- ohdr->u.at.atomic_ack_eth[0] =
- cpu_to_be32(e->atomic_data >> 32);
- ohdr->u.at.atomic_ack_eth[1] =
- cpu_to_be32(e->atomic_data);
- hwords += sizeof(ohdr->u.at) / sizeof(u32);
- bth2 = e->psn;
- e->sent = 1;
- }
- bth0 = qp->s_ack_state << 24;
- break;
-
- case OP(RDMA_READ_RESPONSE_FIRST):
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- len = qp->s_ack_rdma_sge.sge.sge_length;
- if (len > pmtu)
- len = pmtu;
- else {
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST);
- qp->s_ack_queue[qp->s_tail_ack_queue].sent = 1;
- }
- bth0 = qp->s_ack_state << 24;
- bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
- break;
-
- default:
- normal:
- /*
- * Send a regular ACK.
- * Set the s_ack_state so we wait until after sending
- * the ACK before setting s_ack_state to ACKNOWLEDGE
- * (see above).
- */
- qp->s_ack_state = OP(SEND_ONLY);
- qp->s_flags &= ~IPATH_S_ACK_PENDING;
- qp->s_cur_sge = NULL;
- if (qp->s_nak_state)
- ohdr->u.aeth =
- cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
- (qp->s_nak_state <<
- IPATH_AETH_CREDIT_SHIFT));
- else
- ohdr->u.aeth = ipath_compute_aeth(qp);
- hwords++;
- len = 0;
- bth0 = OP(ACKNOWLEDGE) << 24;
- bth2 = qp->s_ack_psn & IPATH_PSN_MASK;
- }
- qp->s_hdrwords = hwords;
- qp->s_cur_size = len;
- ipath_make_ruc_header(dev, qp, ohdr, bth0, bth2);
- return 1;
-
-bail:
- return 0;
-}
-
-/**
- * ipath_make_rc_req - construct a request packet (SEND, RDMA r/w, ATOMIC)
- * @qp: a pointer to the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_rc_req(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_other_headers *ohdr;
- struct ipath_sge_state *ss;
- struct ipath_swqe *wqe;
- u32 hwords;
- u32 len;
- u32 bth0;
- u32 bth2;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- char newreq;
- unsigned long flags;
- int ret = 0;
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
- /*
- * The lock is needed to synchronize between the sending tasklet,
- * the receive interrupt handler, and timeout resends.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Sending responses has higher priority over sending requests. */
- if ((qp->r_head_ack_queue != qp->s_tail_ack_queue ||
- (qp->s_flags & IPATH_S_ACK_PENDING) ||
- qp->s_ack_state != OP(ACKNOWLEDGE)) &&
- ipath_make_rc_ack(dev, qp, ohdr, pmtu))
- goto done;
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- /* Leave BUSY set until RNR timeout. */
- if (qp->s_rnr_timeout) {
- qp->s_flags |= IPATH_S_WAITING;
- goto bail;
- }
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
- bth0 = 1 << 22; /* Set M bit */
-
- /* Send a request. */
- wqe = get_swqe_ptr(qp, qp->s_cur);
- switch (qp->s_state) {
- default:
- if (!(ib_ipath_state_ops[qp->state] &
- IPATH_PROCESS_NEXT_SEND_OK))
- goto bail;
- /*
- * Resend an old request or start a new one.
- *
- * We keep track of the current SWQE so that
- * we don't reset the "furthest progress" state
- * if we need to back up.
- */
- newreq = 0;
- if (qp->s_cur == qp->s_tail) {
- /* Check if send work queue is empty. */
- if (qp->s_tail == qp->s_head)
- goto bail;
- /*
- * If a fence is requested, wait for previous
- * RDMA read and atomic operations to finish.
- */
- if ((wqe->wr.send_flags & IB_SEND_FENCE) &&
- qp->s_num_rd_atomic) {
- qp->s_flags |= IPATH_S_FENCE_PENDING;
- goto bail;
- }
- wqe->psn = qp->s_next_psn;
- newreq = 1;
- }
- /*
- * Note that we have to be careful not to modify the
- * original work request since we may need to resend
- * it.
- */
- len = wqe->length;
- ss = &qp->s_sge;
- bth2 = 0;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- /* If no credit, return. */
- if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
- qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
- goto bail;
- }
- wqe->lpsn = wqe->psn;
- if (len > pmtu) {
- wqe->lpsn += (len - 1) / pmtu;
- qp->s_state = OP(SEND_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_ONLY);
- else {
- qp->s_state = OP(SEND_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth2 = 1 << 31; /* Request ACK. */
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_WRITE:
- if (newreq && qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- /* FALLTHROUGH */
- case IB_WR_RDMA_WRITE_WITH_IMM:
- /* If no credit, return. */
- if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
- qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
- goto bail;
- }
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->wr.wr.rdma.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- hwords += sizeof(struct ib_reth) / sizeof(u32);
- wqe->lpsn = wqe->psn;
- if (len > pmtu) {
- wqe->lpsn += (len - 1) / pmtu;
- qp->s_state = OP(RDMA_WRITE_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_ONLY);
- else {
- qp->s_state =
- OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after RETH */
- ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- bth2 = 1 << 31; /* Request ACK. */
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_READ:
- /*
- * Don't allow more operations to be started
- * than the QP limits allow.
- */
- if (newreq) {
- if (qp->s_num_rd_atomic >=
- qp->s_max_rd_atomic) {
- qp->s_flags |= IPATH_S_RDMAR_PENDING;
- goto bail;
- }
- qp->s_num_rd_atomic++;
- if (qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- /*
- * Adjust s_next_psn to count the
- * expected number of responses.
- */
- if (len > pmtu)
- qp->s_next_psn += (len - 1) / pmtu;
- wqe->lpsn = qp->s_next_psn++;
- }
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->wr.wr.rdma.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- qp->s_state = OP(RDMA_READ_REQUEST);
- hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
- ss = NULL;
- len = 0;
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_ATOMIC_CMP_AND_SWP:
- case IB_WR_ATOMIC_FETCH_AND_ADD:
- /*
- * Don't allow more operations to be started
- * than the QP limits allow.
- */
- if (newreq) {
- if (qp->s_num_rd_atomic >=
- qp->s_max_rd_atomic) {
- qp->s_flags |= IPATH_S_RDMAR_PENDING;
- goto bail;
- }
- qp->s_num_rd_atomic++;
- if (qp->s_lsn != (u32) -1)
- qp->s_lsn++;
- wqe->lpsn = wqe->psn;
- }
- if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP) {
- qp->s_state = OP(COMPARE_SWAP);
- ohdr->u.atomic_eth.swap_data = cpu_to_be64(
- wqe->wr.wr.atomic.swap);
- ohdr->u.atomic_eth.compare_data = cpu_to_be64(
- wqe->wr.wr.atomic.compare_add);
- } else {
- qp->s_state = OP(FETCH_ADD);
- ohdr->u.atomic_eth.swap_data = cpu_to_be64(
- wqe->wr.wr.atomic.compare_add);
- ohdr->u.atomic_eth.compare_data = 0;
- }
- ohdr->u.atomic_eth.vaddr[0] = cpu_to_be32(
- wqe->wr.wr.atomic.remote_addr >> 32);
- ohdr->u.atomic_eth.vaddr[1] = cpu_to_be32(
- wqe->wr.wr.atomic.remote_addr);
- ohdr->u.atomic_eth.rkey = cpu_to_be32(
- wqe->wr.wr.atomic.rkey);
- hwords += sizeof(struct ib_atomic_eth) / sizeof(u32);
- ss = NULL;
- len = 0;
- if (++qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
-
- default:
- goto bail;
- }
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->wr.num_sge;
- qp->s_len = wqe->length;
- if (newreq) {
- qp->s_tail++;
- if (qp->s_tail >= qp->s_size)
- qp->s_tail = 0;
- }
- bth2 |= qp->s_psn & IPATH_PSN_MASK;
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- qp->s_psn = wqe->lpsn + 1;
- else {
- qp->s_psn++;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- }
- /*
- * Put the QP on the pending list so lost ACKs will cause
- * a retry. More than one request can be pending so the
- * QP may already be on the dev->pending list.
- */
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
- break;
-
- case OP(RDMA_READ_RESPONSE_FIRST):
- /*
- * This case can only happen if a send is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- /* FALLTHROUGH */
- case OP(SEND_FIRST):
- qp->s_state = OP(SEND_MIDDLE);
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- bth2 = qp->s_psn++ & IPATH_PSN_MASK;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- ss = &qp->s_sge;
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_LAST);
- else {
- qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_cur++;
- if (qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_READ_RESPONSE_LAST):
- /*
- * This case can only happen if a RDMA write is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_FIRST):
- qp->s_state = OP(RDMA_WRITE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- bth2 = qp->s_psn++ & IPATH_PSN_MASK;
- if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
- qp->s_next_psn = qp->s_psn;
- ss = &qp->s_sge;
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_LAST);
- else {
- qp->s_state = OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_cur++;
- if (qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- /*
- * This case can only happen if a RDMA read is restarted.
- * See ipath_restart_rc().
- */
- ipath_init_restart(qp, wqe);
- len = ((qp->s_psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->wr.wr.rdma.remote_addr + len);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->wr.wr.rdma.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(qp->s_len);
- qp->s_state = OP(RDMA_READ_REQUEST);
- hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
- bth2 = qp->s_psn & IPATH_PSN_MASK;
- qp->s_psn = wqe->lpsn + 1;
- ss = NULL;
- len = 0;
- qp->s_cur++;
- if (qp->s_cur == qp->s_size)
- qp->s_cur = 0;
- break;
- }
- if (ipath_cmp24(qp->s_psn, qp->s_last_psn + IPATH_PSN_CREDIT - 1) >= 0)
- bth2 |= 1 << 31; /* Request ACK. */
- qp->s_len -= len;
- qp->s_hdrwords = hwords;
- qp->s_cur_sge = ss;
- qp->s_cur_size = len;
- ipath_make_ruc_header(dev, qp, ohdr, bth0 | (qp->s_state << 24), bth2);
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * send_rc_ack - Construct an ACK packet and send it
- * @qp: a pointer to the QP
- *
- * This is called from ipath_rc_rcv() and only uses the receive
- * side QP state.
- * Note that RDMA reads and atomics are handled in the
- * send side QP state and tasklet.
- */
-static void send_rc_ack(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_devdata *dd;
- u16 lrh0;
- u32 bth0;
- u32 hwords;
- u32 __iomem *piobuf;
- struct ipath_ib_header hdr;
- struct ipath_other_headers *ohdr;
- unsigned long flags;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Don't send ACK or NAK if a RDMA read or atomic is pending. */
- if (qp->r_head_ack_queue != qp->s_tail_ack_queue ||
- (qp->s_flags & IPATH_S_ACK_PENDING) ||
- qp->s_ack_state != OP(ACKNOWLEDGE))
- goto queue_ack;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Don't try to send ACKs if the link isn't ACTIVE */
- dd = dev->dd;
- if (!(dd->ipath_flags & IPATH_LINKACTIVE))
- goto done;
-
- piobuf = ipath_getpiobuf(dd, 0, NULL);
- if (!piobuf) {
- /*
- * We are out of PIO buffers at the moment.
- * Pass responsibility for sending the ACK to the
- * send tasklet so that when a PIO buffer becomes
- * available, the ACK is sent ahead of other outgoing
- * packets.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
- goto queue_ack;
- }
-
- /* Construct the header. */
- ohdr = &hdr.u.oth;
- lrh0 = IPATH_LRH_BTH;
- /* header size in 32-bit words LRH+BTH+AETH = (8+12+4)/4. */
- hwords = 6;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- hwords += ipath_make_grh(dev, &hdr.u.l.grh,
- &qp->remote_ah_attr.grh,
- hwords, 0);
- ohdr = &hdr.u.l.oth;
- lrh0 = IPATH_LRH_GRH;
- }
- /* read pkey_index w/o lock (its atomic) */
- bth0 = ipath_get_pkey(dd, qp->s_pkey_index) |
- (OP(ACKNOWLEDGE) << 24) | (1 << 22);
- if (qp->r_nak_state)
- ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
- (qp->r_nak_state <<
- IPATH_AETH_CREDIT_SHIFT));
- else
- ohdr->u.aeth = ipath_compute_aeth(qp);
- lrh0 |= qp->remote_ah_attr.sl << 4;
- hdr.lrh[0] = cpu_to_be16(lrh0);
- hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC);
- hdr.lrh[3] = cpu_to_be16(dd->ipath_lid |
- qp->remote_ah_attr.src_path_bits);
- ohdr->bth[0] = cpu_to_be32(bth0);
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(qp->r_ack_psn & IPATH_PSN_MASK);
-
- writeq(hwords + 1, piobuf);
-
- if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
- u32 *hdrp = (u32 *) &hdr;
-
- ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, hdrp, hwords - 1);
- ipath_flush_wc();
- __raw_writel(hdrp[hwords - 1], piobuf + hwords + 1);
- } else
- __iowrite32_copy(piobuf + 2, (u32 *) &hdr, hwords);
-
- ipath_flush_wc();
-
- dev->n_unicast_xmit++;
- goto done;
-
-queue_ack:
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK) {
- dev->n_rc_qacks++;
- qp->s_flags |= IPATH_S_ACK_PENDING;
- qp->s_nak_state = qp->r_nak_state;
- qp->s_ack_psn = qp->r_ack_psn;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
- }
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return;
-}
-
-/**
- * reset_psn - reset the QP state to send starting from PSN
- * @qp: the QP
- * @psn: the packet sequence number to restart at
- *
- * This is called from ipath_rc_rcv() to process an incoming RC ACK
- * for the given QP.
- * Called at interrupt level with the QP s_lock held.
- */
-static void reset_psn(struct ipath_qp *qp, u32 psn)
-{
- u32 n = qp->s_last;
- struct ipath_swqe *wqe = get_swqe_ptr(qp, n);
- u32 opcode;
-
- qp->s_cur = n;
-
- /*
- * If we are starting the request from the beginning,
- * let the normal send code handle initialization.
- */
- if (ipath_cmp24(psn, wqe->psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- goto done;
- }
-
- /* Find the work request opcode corresponding to the given PSN. */
- opcode = wqe->wr.opcode;
- for (;;) {
- int diff;
-
- if (++n == qp->s_size)
- n = 0;
- if (n == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, n);
- diff = ipath_cmp24(psn, wqe->psn);
- if (diff < 0)
- break;
- qp->s_cur = n;
- /*
- * If we are starting the request from the beginning,
- * let the normal send code handle initialization.
- */
- if (diff == 0) {
- qp->s_state = OP(SEND_LAST);
- goto done;
- }
- opcode = wqe->wr.opcode;
- }
-
- /*
- * Set the state to restart in the middle of a request.
- * Don't change the s_sge, s_cur_sge, or s_cur_size.
- * See ipath_make_rc_req().
- */
- switch (opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
- break;
-
- case IB_WR_RDMA_READ:
- qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE);
- break;
-
- default:
- /*
- * This case shouldn't happen since its only
- * one PSN per req.
- */
- qp->s_state = OP(SEND_LAST);
- }
-done:
- qp->s_psn = psn;
-}
-
-/**
- * ipath_restart_rc - back up requester to resend the last un-ACKed request
- * @qp: the QP to restart
- * @psn: packet sequence number for the request
- * @wc: the work completion request
- *
- * The QP s_lock should be held and interrupts disabled.
- */
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn)
-{
- struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
- struct ipath_ibdev *dev;
-
- if (qp->s_retry == 0) {
- ipath_send_complete(qp, wqe, IB_WC_RETRY_EXC_ERR);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- goto bail;
- }
- qp->s_retry--;
-
- /*
- * Remove the QP from the timeout queue.
- * Note: it may already have been removed by ipath_ib_timer().
- */
- dev = to_idev(qp->ibqp.device);
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
-
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- dev->n_rc_resends++;
- else
- dev->n_rc_resends += (qp->s_psn - psn) & IPATH_PSN_MASK;
-
- reset_psn(qp, psn);
- ipath_schedule_send(qp);
-
-bail:
- return;
-}
-
-static inline void update_last_psn(struct ipath_qp *qp, u32 psn)
-{
- qp->s_last_psn = psn;
-}
-
-/**
- * do_rc_ack - process an incoming RC ACK
- * @qp: the QP the ACK came in on
- * @psn: the packet sequence number of the ACK
- * @opcode: the opcode of the request that resulted in the ACK
- *
- * This is called from ipath_rc_rcv_resp() to process an incoming RC ACK
- * for the given QP.
- * Called at interrupt level with the QP s_lock held and interrupts disabled.
- * Returns 1 if OK, 0 if current operation should be aborted (NAK).
- */
-static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode,
- u64 val)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ib_wc wc;
- enum ib_wc_status status;
- struct ipath_swqe *wqe;
- int ret = 0;
- u32 ack_psn;
- int diff;
-
- /*
- * Remove the QP from the timeout queue (or RNR timeout queue).
- * If ipath_ib_timer() has already removed it,
- * it's OK since we hold the QP s_lock and ipath_restart_rc()
- * just won't find anything to restart if we ACK everything.
- */
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- spin_unlock(&dev->pending_lock);
-
- /*
- * Note that NAKs implicitly ACK outstanding SEND and RDMA write
- * requests and implicitly NAK RDMA read and atomic requests issued
- * before the NAK'ed request. The MSN won't include the NAK'ed
- * request but will include an ACK'ed request(s).
- */
- ack_psn = psn;
- if (aeth >> 29)
- ack_psn--;
- wqe = get_swqe_ptr(qp, qp->s_last);
-
- /*
- * The MSN might be for a later WQE than the PSN indicates so
- * only complete WQEs that the PSN finishes.
- */
- while ((diff = ipath_cmp24(ack_psn, wqe->lpsn)) >= 0) {
- /*
- * RDMA_READ_RESPONSE_ONLY is a special case since
- * we want to generate completion events for everything
- * before the RDMA read, copy the data, then generate
- * the completion for the read.
- */
- if (wqe->wr.opcode == IB_WR_RDMA_READ &&
- opcode == OP(RDMA_READ_RESPONSE_ONLY) &&
- diff == 0) {
- ret = 1;
- goto bail;
- }
- /*
- * If this request is a RDMA read or atomic, and the ACK is
- * for a later operation, this ACK NAKs the RDMA read or
- * atomic. In other words, only a RDMA_READ_LAST or ONLY
- * can ACK a RDMA read and likewise for atomic ops. Note
- * that the NAK case can only happen if relaxed ordering is
- * used and requests are sent after an RDMA read or atomic
- * is sent but before the response is received.
- */
- if ((wqe->wr.opcode == IB_WR_RDMA_READ &&
- (opcode != OP(RDMA_READ_RESPONSE_LAST) || diff != 0)) ||
- ((wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) &&
- (opcode != OP(ATOMIC_ACKNOWLEDGE) || diff != 0))) {
- /*
- * The last valid PSN seen is the previous
- * request's.
- */
- update_last_psn(qp, wqe->psn - 1);
- /* Retry this request. */
- ipath_restart_rc(qp, wqe->psn);
- /*
- * No need to process the ACK/NAK since we are
- * restarting an earlier request.
- */
- goto bail;
- }
- if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
- *(u64 *) wqe->sg_list[0].vaddr = val;
- if (qp->s_num_rd_atomic &&
- (wqe->wr.opcode == IB_WR_RDMA_READ ||
- wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
- wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)) {
- qp->s_num_rd_atomic--;
- /* Restart sending task if fence is complete */
- if (((qp->s_flags & IPATH_S_FENCE_PENDING) &&
- !qp->s_num_rd_atomic) ||
- qp->s_flags & IPATH_S_RDMAR_PENDING)
- ipath_schedule_send(qp);
- }
- /* Post a send completion queue entry if requested. */
- if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
- (wqe->wr.send_flags & IB_SEND_SIGNALED)) {
- memset(&wc, 0, sizeof wc);
- wc.wr_id = wqe->wr.wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.byte_len = wqe->length;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
- }
- qp->s_retry = qp->s_retry_cnt;
- /*
- * If we are completing a request which is in the process of
- * being resent, we can stop resending it since we know the
- * responder has already seen it.
- */
- if (qp->s_last == qp->s_cur) {
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- qp->s_last = qp->s_cur;
- if (qp->s_last == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, qp->s_cur);
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = wqe->psn;
- } else {
- if (++qp->s_last >= qp->s_size)
- qp->s_last = 0;
- if (qp->state == IB_QPS_SQD && qp->s_last == qp->s_cur)
- qp->s_draining = 0;
- if (qp->s_last == qp->s_tail)
- break;
- wqe = get_swqe_ptr(qp, qp->s_last);
- }
- }
-
- switch (aeth >> 29) {
- case 0: /* ACK */
- dev->n_rc_acks++;
- /* If this is a partial ACK, reset the retransmit timer. */
- if (qp->s_last != qp->s_tail) {
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->timerwait))
- list_add_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
- /*
- * If we get a partial ACK for a resent operation,
- * we can stop resending the earlier packets and
- * continue with the next packet the receiver wants.
- */
- if (ipath_cmp24(qp->s_psn, psn) <= 0) {
- reset_psn(qp, psn + 1);
- ipath_schedule_send(qp);
- }
- } else if (ipath_cmp24(qp->s_psn, psn) <= 0) {
- qp->s_state = OP(SEND_LAST);
- qp->s_psn = psn + 1;
- }
- ipath_get_credit(qp, aeth);
- qp->s_rnr_retry = qp->s_rnr_retry_cnt;
- qp->s_retry = qp->s_retry_cnt;
- update_last_psn(qp, psn);
- ret = 1;
- goto bail;
-
- case 1: /* RNR NAK */
- dev->n_rnr_naks++;
- if (qp->s_last == qp->s_tail)
- goto bail;
- if (qp->s_rnr_retry == 0) {
- status = IB_WC_RNR_RETRY_EXC_ERR;
- goto class_b;
- }
- if (qp->s_rnr_retry_cnt < 7)
- qp->s_rnr_retry--;
-
- /* The last valid PSN is the previous PSN. */
- update_last_psn(qp, psn - 1);
-
- if (wqe->wr.opcode == IB_WR_RDMA_READ)
- dev->n_rc_resends++;
- else
- dev->n_rc_resends +=
- (qp->s_psn - psn) & IPATH_PSN_MASK;
-
- reset_psn(qp, psn);
-
- qp->s_rnr_timeout =
- ib_ipath_rnr_table[(aeth >> IPATH_AETH_CREDIT_SHIFT) &
- IPATH_AETH_CREDIT_MASK];
- ipath_insert_rnr_queue(qp);
- ipath_schedule_send(qp);
- goto bail;
-
- case 3: /* NAK */
- if (qp->s_last == qp->s_tail)
- goto bail;
- /* The last valid PSN is the previous PSN. */
- update_last_psn(qp, psn - 1);
- switch ((aeth >> IPATH_AETH_CREDIT_SHIFT) &
- IPATH_AETH_CREDIT_MASK) {
- case 0: /* PSN sequence error */
- dev->n_seq_naks++;
- /*
- * Back up to the responder's expected PSN.
- * Note that we might get a NAK in the middle of an
- * RDMA READ response which terminates the RDMA
- * READ.
- */
- ipath_restart_rc(qp, psn);
- break;
-
- case 1: /* Invalid Request */
- status = IB_WC_REM_INV_REQ_ERR;
- dev->n_other_naks++;
- goto class_b;
-
- case 2: /* Remote Access Error */
- status = IB_WC_REM_ACCESS_ERR;
- dev->n_other_naks++;
- goto class_b;
-
- case 3: /* Remote Operation Error */
- status = IB_WC_REM_OP_ERR;
- dev->n_other_naks++;
- class_b:
- ipath_send_complete(qp, wqe, status);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
- break;
-
- default:
- /* Ignore other reserved NAK error codes */
- goto reserved;
- }
- qp->s_rnr_retry = qp->s_rnr_retry_cnt;
- goto bail;
-
- default: /* 2: reserved */
- reserved:
- /* Ignore reserved NAK codes. */
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-/**
- * ipath_rc_rcv_resp - process an incoming RC response packet
- * @dev: the device this packet came in on
- * @ohdr: the other headers for this packet
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP for this packet
- * @opcode: the opcode for this packet
- * @psn: the packet sequence number for this packet
- * @hdrsize: the header length
- * @pmtu: the path MTU
- * @header_in_data: true if part of the header data is in the data buffer
- *
- * This is called from ipath_rc_rcv() to process an incoming RC response
- * packet for the given QP.
- * Called at interrupt level.
- */
-static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
- struct ipath_other_headers *ohdr,
- void *data, u32 tlen,
- struct ipath_qp *qp,
- u32 opcode,
- u32 psn, u32 hdrsize, u32 pmtu,
- int header_in_data)
-{
- struct ipath_swqe *wqe;
- enum ib_wc_status status;
- unsigned long flags;
- int diff;
- u32 pad;
- u32 aeth;
- u64 val;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Double check we can process this now that we hold the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto ack_done;
-
- /* Ignore invalid responses. */
- if (ipath_cmp24(psn, qp->s_next_psn) >= 0)
- goto ack_done;
-
- /* Ignore duplicate responses. */
- diff = ipath_cmp24(psn, qp->s_last_psn);
- if (unlikely(diff <= 0)) {
- /* Update credits for "ghost" ACKs */
- if (diff == 0 && opcode == OP(ACKNOWLEDGE)) {
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- if ((aeth >> 29) == 0)
- ipath_get_credit(qp, aeth);
- }
- goto ack_done;
- }
-
- if (unlikely(qp->s_last == qp->s_tail))
- goto ack_done;
- wqe = get_swqe_ptr(qp, qp->s_last);
- status = IB_WC_SUCCESS;
-
- switch (opcode) {
- case OP(ACKNOWLEDGE):
- case OP(ATOMIC_ACKNOWLEDGE):
- case OP(RDMA_READ_RESPONSE_FIRST):
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- if (opcode == OP(ATOMIC_ACKNOWLEDGE)) {
- if (!header_in_data) {
- __be32 *p = ohdr->u.at.atomic_ack_eth;
-
- val = ((u64) be32_to_cpu(p[0]) << 32) |
- be32_to_cpu(p[1]);
- } else
- val = be64_to_cpu(((__be64 *) data)[0]);
- } else
- val = 0;
- if (!do_rc_ack(qp, aeth, psn, opcode, val) ||
- opcode != OP(RDMA_READ_RESPONSE_FIRST))
- goto ack_done;
- hdrsize += 4;
- wqe = get_swqe_ptr(qp, qp->s_last);
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- qp->r_flags &= ~IPATH_R_RDMAR_SEQ;
- /*
- * If this is a response to a resent RDMA read, we
- * have to be careful to copy the data to the right
- * location.
- */
- qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
- wqe, psn, pmtu);
- goto read_middle;
-
- case OP(RDMA_READ_RESPONSE_MIDDLE):
- /* no AETH, no ACK */
- if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
- dev->n_rdma_seq++;
- if (qp->r_flags & IPATH_R_RDMAR_SEQ)
- goto ack_done;
- qp->r_flags |= IPATH_R_RDMAR_SEQ;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- goto ack_done;
- }
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- read_middle:
- if (unlikely(tlen != (hdrsize + pmtu + 4)))
- goto ack_len_err;
- if (unlikely(pmtu >= qp->s_rdma_read_len))
- goto ack_len_err;
-
- /* We got a response so update the timeout. */
- spin_lock(&dev->pending_lock);
- if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
- list_move_tail(&qp->timerwait,
- &dev->pending[dev->pending_index]);
- spin_unlock(&dev->pending_lock);
-
- if (opcode == OP(RDMA_READ_RESPONSE_MIDDLE))
- qp->s_retry = qp->s_retry_cnt;
-
- /*
- * Update the RDMA receive state but do the copy w/o
- * holding the locks and blocking interrupts.
- */
- qp->s_rdma_read_len -= pmtu;
- update_last_psn(qp, psn);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- ipath_copy_sge(&qp->s_rdma_read_sge, data, pmtu);
- goto bail;
-
- case OP(RDMA_READ_RESPONSE_ONLY):
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- if (!do_rc_ack(qp, aeth, psn, opcode, 0))
- goto ack_done;
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /*
- * Check that the data size is >= 0 && <= pmtu.
- * Remember to account for the AETH header (4) and
- * ICRC (4).
- */
- if (unlikely(tlen < (hdrsize + pad + 8)))
- goto ack_len_err;
- /*
- * If this is a response to a resent RDMA read, we
- * have to be careful to copy the data to the right
- * location.
- */
- wqe = get_swqe_ptr(qp, qp->s_last);
- qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
- wqe, psn, pmtu);
- goto read_last;
-
- case OP(RDMA_READ_RESPONSE_LAST):
- /* ACKs READ req. */
- if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
- dev->n_rdma_seq++;
- if (qp->r_flags & IPATH_R_RDMAR_SEQ)
- goto ack_done;
- qp->r_flags |= IPATH_R_RDMAR_SEQ;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- goto ack_done;
- }
- if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
- goto ack_op_err;
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /*
- * Check that the data size is >= 1 && <= pmtu.
- * Remember to account for the AETH header (4) and
- * ICRC (4).
- */
- if (unlikely(tlen <= (hdrsize + pad + 8)))
- goto ack_len_err;
- read_last:
- tlen -= hdrsize + pad + 8;
- if (unlikely(tlen != qp->s_rdma_read_len))
- goto ack_len_err;
- if (!header_in_data)
- aeth = be32_to_cpu(ohdr->u.aeth);
- else {
- aeth = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- }
- ipath_copy_sge(&qp->s_rdma_read_sge, data, tlen);
- (void) do_rc_ack(qp, aeth, psn,
- OP(RDMA_READ_RESPONSE_LAST), 0);
- goto ack_done;
- }
-
-ack_op_err:
- status = IB_WC_LOC_QP_OP_ERR;
- goto ack_err;
-
-ack_len_err:
- status = IB_WC_LOC_LEN_ERR;
-ack_err:
- ipath_send_complete(qp, wqe, status);
- ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
-ack_done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-bail:
- return;
-}
-
-/**
- * ipath_rc_rcv_error - process an incoming duplicate or error RC packet
- * @dev: the device this packet came in on
- * @ohdr: the other headers for this packet
- * @data: the packet data
- * @qp: the QP for this packet
- * @opcode: the opcode for this packet
- * @psn: the packet sequence number for this packet
- * @diff: the difference between the PSN and the expected PSN
- * @header_in_data: true if part of the header data is in the data buffer
- *
- * This is called from ipath_rc_rcv() to process an unexpected
- * incoming RC packet for the given QP.
- * Called at interrupt level.
- * Return 1 if no more processing is needed; otherwise return 0 to
- * schedule a response to be sent.
- */
-static inline int ipath_rc_rcv_error(struct ipath_ibdev *dev,
- struct ipath_other_headers *ohdr,
- void *data,
- struct ipath_qp *qp,
- u32 opcode,
- u32 psn,
- int diff,
- int header_in_data)
-{
- struct ipath_ack_entry *e;
- u8 i, prev;
- int old_req;
- unsigned long flags;
-
- if (diff > 0) {
- /*
- * Packet sequence error.
- * A NAK will ACK earlier sends and RDMA writes.
- * Don't queue the NAK if we already sent one.
- */
- if (!qp->r_nak_state) {
- qp->r_nak_state = IB_NAK_PSN_ERROR;
- /* Use the expected PSN. */
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
- }
- goto done;
- }
-
- /*
- * Handle a duplicate request. Don't re-execute SEND, RDMA
- * write or atomic op. Don't NAK errors, just silently drop
- * the duplicate request. Note that r_sge, r_len, and
- * r_rcv_len may be in use so don't modify them.
- *
- * We are supposed to ACK the earliest duplicate PSN but we
- * can coalesce an outstanding duplicate ACK. We have to
- * send the earliest so that RDMA reads can be restarted at
- * the requester's expected PSN.
- *
- * First, find where this duplicate PSN falls within the
- * ACKs previously sent.
- */
- psn &= IPATH_PSN_MASK;
- e = NULL;
- old_req = 1;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this now that we hold the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock_done;
-
- for (i = qp->r_head_ack_queue; ; i = prev) {
- if (i == qp->s_tail_ack_queue)
- old_req = 0;
- if (i)
- prev = i - 1;
- else
- prev = IPATH_MAX_RDMA_ATOMIC;
- if (prev == qp->r_head_ack_queue) {
- e = NULL;
- break;
- }
- e = &qp->s_ack_queue[prev];
- if (!e->opcode) {
- e = NULL;
- break;
- }
- if (ipath_cmp24(psn, e->psn) >= 0) {
- if (prev == qp->s_tail_ack_queue)
- old_req = 0;
- break;
- }
- }
- switch (opcode) {
- case OP(RDMA_READ_REQUEST): {
- struct ib_reth *reth;
- u32 offset;
- u32 len;
-
- /*
- * If we didn't find the RDMA read request in the ack queue,
- * or the send tasklet is already backed up to send an
- * earlier entry, we can ignore this request.
- */
- if (!e || e->opcode != OP(RDMA_READ_REQUEST) || old_req)
- goto unlock_done;
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- /*
- * Address range must be a subset of the original
- * request and start on pmtu boundaries.
- * We reuse the old ack_queue slot since the requester
- * should not back up and request an earlier PSN for the
- * same request.
- */
- offset = ((psn - e->psn) & IPATH_PSN_MASK) *
- ib_mtu_enum_to_int(qp->path_mtu);
- len = be32_to_cpu(reth->length);
- if (unlikely(offset + len > e->rdma_sge.sge.sge_length))
- goto unlock_done;
- if (len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- ok = ipath_rkey_ok(qp, &e->rdma_sge,
- len, vaddr, rkey,
- IB_ACCESS_REMOTE_READ);
- if (unlikely(!ok))
- goto unlock_done;
- } else {
- e->rdma_sge.sg_list = NULL;
- e->rdma_sge.num_sge = 0;
- e->rdma_sge.sge.mr = NULL;
- e->rdma_sge.sge.vaddr = NULL;
- e->rdma_sge.sge.length = 0;
- e->rdma_sge.sge.sge_length = 0;
- }
- e->psn = psn;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = prev;
- break;
- }
-
- case OP(COMPARE_SWAP):
- case OP(FETCH_ADD): {
- /*
- * If we didn't find the atomic request in the ack queue
- * or the send tasklet is already backed up to send an
- * earlier entry, we can ignore this request.
- */
- if (!e || e->opcode != (u8) opcode || old_req)
- goto unlock_done;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = prev;
- break;
- }
-
- default:
- if (old_req)
- goto unlock_done;
- /*
- * Resend the most recent ACK if this request is
- * after all the previous RDMA reads and atomics.
- */
- if (i == qp->r_head_ack_queue) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- qp->r_nak_state = 0;
- qp->r_ack_psn = qp->r_psn - 1;
- goto send_ack;
- }
- /*
- * Try to send a simple ACK to work around a Mellanox bug
- * which doesn't accept a RDMA read response or atomic
- * response as an ACK for earlier SENDs or RDMA writes.
- */
- if (qp->r_head_ack_queue == qp->s_tail_ack_queue &&
- !(qp->s_flags & IPATH_S_ACK_PENDING) &&
- qp->s_ack_state == OP(ACKNOWLEDGE)) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- qp->r_nak_state = 0;
- qp->r_ack_psn = qp->s_ack_queue[i].psn - 1;
- goto send_ack;
- }
- /*
- * Resend the RDMA read or atomic op which
- * ACKs this duplicate request.
- */
- qp->s_ack_state = OP(ACKNOWLEDGE);
- qp->s_tail_ack_queue = i;
- break;
- }
- qp->r_nak_state = 0;
- ipath_schedule_send(qp);
-
-unlock_done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return 1;
-
-send_ack:
- return 0;
-}
-
-void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err)
-{
- unsigned long flags;
- int lastwqe;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- lastwqe = ipath_error_qp(qp, err);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = qp->ibqp.device;
- ev.element.qp = &qp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
- }
-}
-
-static inline void ipath_update_ack_queue(struct ipath_qp *qp, unsigned n)
-{
- unsigned next;
-
- next = n + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- if (n == qp->s_tail_ack_queue) {
- qp->s_tail_ack_queue = next;
- qp->s_ack_state = OP(ACKNOWLEDGE);
- }
-}
-
-/**
- * ipath_rc_rcv - process an incoming RC packet
- * @dev: the device this packet came in on
- * @hdr: the header of this packet
- * @has_grh: true if the header has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP for this packet
- *
- * This is called from ipath_qp_rcv() to process an incoming RC packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- u32 opcode;
- u32 hdrsize;
- u32 psn;
- u32 pad;
- struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- int diff;
- struct ib_reth *reth;
- int header_in_data;
- unsigned long flags;
-
- /* Validate the SLID. See Ch. 9.6.1.5 */
- if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
- goto done;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12; /* LRH + BTH */
- psn = be32_to_cpu(ohdr->bth[2]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
- /*
- * The header with GRH is 60 bytes and the core driver sets
- * the eager header buffer size to 56 bytes so the last 4
- * bytes of the BTH header (PSN) is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- psn = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- } else
- psn = be32_to_cpu(ohdr->bth[2]);
- }
-
- /*
- * Process responses (ACKs) before anything else. Note that the
- * packet sequence number will be for something in the send work
- * queue rather than the expected receive packet sequence number.
- * In other words, this QP is the requester.
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) &&
- opcode <= OP(ATOMIC_ACKNOWLEDGE)) {
- ipath_rc_rcv_resp(dev, ohdr, data, tlen, qp, opcode, psn,
- hdrsize, pmtu, header_in_data);
- goto done;
- }
-
- /* Compute 24 bits worth of difference. */
- diff = ipath_cmp24(psn, qp->r_psn);
- if (unlikely(diff)) {
- if (ipath_rc_rcv_error(dev, ohdr, data, qp, opcode,
- psn, diff, header_in_data))
- goto done;
- goto send_ack;
- }
-
- /* Check for opcode sequence errors. */
- switch (qp->r_state) {
- case OP(SEND_FIRST):
- case OP(SEND_MIDDLE):
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE))
- break;
- goto nack_inv;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_MIDDLE):
- if (opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- break;
- goto nack_inv;
-
- default:
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- goto nack_inv;
- /*
- * Note that it is up to the requester to not send a new
- * RDMA read or atomic operation before receiving an ACK
- * for the previous operation.
- */
- break;
- }
-
- memset(&wc, 0, sizeof wc);
-
- /* OK, process the packet. */
- switch (opcode) {
- case OP(SEND_FIRST):
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- qp->r_rcv_len = 0;
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- case OP(RDMA_WRITE_MIDDLE):
- send_middle:
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4)))
- goto nack_inv;
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len))
- goto nack_inv;
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
- /* consume RWQE */
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- goto send_last_imm;
-
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- qp->r_rcv_len = 0;
- if (opcode == OP(SEND_ONLY))
- goto send_last;
- /* FALLTHROUGH */
- case OP(SEND_LAST_WITH_IMMEDIATE):
- send_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
- case OP(SEND_LAST):
- case OP(RDMA_WRITE_LAST):
- send_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4)))
- goto nack_inv;
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- wc.byte_len = tlen + qp->r_rcv_len;
- if (unlikely(wc.byte_len > qp->r_len))
- goto nack_inv;
- ipath_copy_sge(&qp->r_sge, data, tlen);
- qp->r_msn++;
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- break;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- else
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
- break;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE)))
- goto nack_inv;
- /* consume RWQE */
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- hdrsize += sizeof(*reth);
- qp->r_len = be32_to_cpu(reth->length);
- qp->r_rcv_len = 0;
- if (qp->r_len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey & NAK */
- ok = ipath_rkey_ok(qp, &qp->r_sge,
- qp->r_len, vaddr, rkey,
- IB_ACCESS_REMOTE_WRITE);
- if (unlikely(!ok))
- goto nack_acc;
- } else {
- qp->r_sge.sg_list = NULL;
- qp->r_sge.sge.mr = NULL;
- qp->r_sge.sge.vaddr = NULL;
- qp->r_sge.sge.length = 0;
- qp->r_sge.sge.sge_length = 0;
- }
- if (opcode == OP(RDMA_WRITE_FIRST))
- goto send_middle;
- else if (opcode == OP(RDMA_WRITE_ONLY))
- goto send_last;
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- goto send_last_imm;
-
- case OP(RDMA_READ_REQUEST): {
- struct ipath_ack_entry *e;
- u32 len;
- u8 next;
-
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_READ)))
- goto nack_inv;
- next = qp->r_head_ack_queue + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this while holding the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock;
- if (unlikely(next == qp->s_tail_ack_queue)) {
- if (!qp->s_ack_queue[next].sent)
- goto nack_inv_unlck;
- ipath_update_ack_queue(qp, next);
- }
- e = &qp->s_ack_queue[qp->r_head_ack_queue];
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- len = be32_to_cpu(reth->length);
- if (len) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey & NAK */
- ok = ipath_rkey_ok(qp, &e->rdma_sge, len, vaddr,
- rkey, IB_ACCESS_REMOTE_READ);
- if (unlikely(!ok))
- goto nack_acc_unlck;
- /*
- * Update the next expected PSN. We add 1 later
- * below, so only add the remainder here.
- */
- if (len > pmtu)
- qp->r_psn += (len - 1) / pmtu;
- } else {
- e->rdma_sge.sg_list = NULL;
- e->rdma_sge.num_sge = 0;
- e->rdma_sge.sge.mr = NULL;
- e->rdma_sge.sge.vaddr = NULL;
- e->rdma_sge.sge.length = 0;
- e->rdma_sge.sge.sge_length = 0;
- }
- e->opcode = opcode;
- e->sent = 0;
- e->psn = psn;
- /*
- * We need to increment the MSN here instead of when we
- * finish sending the result since a duplicate request would
- * increment it more than once.
- */
- qp->r_msn++;
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_nak_state = 0;
- qp->r_head_ack_queue = next;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
-
- goto unlock;
- }
-
- case OP(COMPARE_SWAP):
- case OP(FETCH_ADD): {
- struct ib_atomic_eth *ateth;
- struct ipath_ack_entry *e;
- u64 vaddr;
- atomic64_t *maddr;
- u64 sdata;
- u32 rkey;
- u8 next;
-
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_ATOMIC)))
- goto nack_inv;
- next = qp->r_head_ack_queue + 1;
- if (next > IPATH_MAX_RDMA_ATOMIC)
- next = 0;
- spin_lock_irqsave(&qp->s_lock, flags);
- /* Double check we can process this while holding the s_lock. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
- goto unlock;
- if (unlikely(next == qp->s_tail_ack_queue)) {
- if (!qp->s_ack_queue[next].sent)
- goto nack_inv_unlck;
- ipath_update_ack_queue(qp, next);
- }
- if (!header_in_data)
- ateth = &ohdr->u.atomic_eth;
- else
- ateth = (struct ib_atomic_eth *)data;
- vaddr = ((u64) be32_to_cpu(ateth->vaddr[0]) << 32) |
- be32_to_cpu(ateth->vaddr[1]);
- if (unlikely(vaddr & (sizeof(u64) - 1)))
- goto nack_inv_unlck;
- rkey = be32_to_cpu(ateth->rkey);
- /* Check rkey & NAK */
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge,
- sizeof(u64), vaddr, rkey,
- IB_ACCESS_REMOTE_ATOMIC)))
- goto nack_acc_unlck;
- /* Perform atomic OP and save result. */
- maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
- sdata = be64_to_cpu(ateth->swap_data);
- e = &qp->s_ack_queue[qp->r_head_ack_queue];
- e->atomic_data = (opcode == OP(FETCH_ADD)) ?
- (u64) atomic64_add_return(sdata, maddr) - sdata :
- (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
- be64_to_cpu(ateth->compare_data),
- sdata);
- e->opcode = opcode;
- e->sent = 0;
- e->psn = psn & IPATH_PSN_MASK;
- qp->r_msn++;
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_nak_state = 0;
- qp->r_head_ack_queue = next;
-
- /* Schedule the send tasklet. */
- ipath_schedule_send(qp);
-
- goto unlock;
- }
-
- default:
- /* NAK unknown opcodes. */
- goto nack_inv;
- }
- qp->r_psn++;
- qp->r_state = opcode;
- qp->r_ack_psn = psn;
- qp->r_nak_state = 0;
- /* Send an ACK if requested or required. */
- if (psn & (1 << 31))
- goto send_ack;
- goto done;
-
-rnr_nak:
- qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
-
-nack_inv_unlck:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-nack_inv:
- ipath_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
- qp->r_nak_state = IB_NAK_INVALID_REQUEST;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
-
-nack_acc_unlck:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-nack_acc:
- ipath_rc_error(qp, IB_WC_LOC_PROT_ERR);
- qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR;
- qp->r_ack_psn = qp->r_psn;
-send_ack:
- send_rc_ack(qp);
- goto done;
-
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
-done:
- return;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _IPATH_REGISTERS_H
-#define _IPATH_REGISTERS_H
-
-/*
- * This file should only be included by kernel source, and by the diags. It
- * defines the registers, and their contents, for InfiniPath chips.
- */
-
-/*
- * These are the InfiniPath register and buffer bit definitions,
- * that are visible to software, and needed only by the kernel
- * and diag code. A few, that are visible to protocol and user
- * code are in ipath_common.h. Some bits are specific
- * to a given chip implementation, and have been moved to the
- * chip-specific source file
- */
-
-/* kr_revision bits */
-#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF
-#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0
-#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF
-#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8
-#define INFINIPATH_R_ARCH_MASK 0xFF
-#define INFINIPATH_R_ARCH_SHIFT 16
-#define INFINIPATH_R_SOFTWARE_MASK 0xFF
-#define INFINIPATH_R_SOFTWARE_SHIFT 24
-#define INFINIPATH_R_BOARDID_MASK 0xFF
-#define INFINIPATH_R_BOARDID_SHIFT 32
-
-/* kr_control bits */
-#define INFINIPATH_C_FREEZEMODE 0x00000002
-#define INFINIPATH_C_LINKENABLE 0x00000004
-
-/* kr_sendctrl bits */
-#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
-#define INFINIPATH_S_UPDTHRESH_SHIFT 24
-#define INFINIPATH_S_UPDTHRESH_MASK 0x1f
-
-#define IPATH_S_ABORT 0
-#define IPATH_S_PIOINTBUFAVAIL 1
-#define IPATH_S_PIOBUFAVAILUPD 2
-#define IPATH_S_PIOENABLE 3
-#define IPATH_S_SDMAINTENABLE 9
-#define IPATH_S_SDMASINGLEDESCRIPTOR 10
-#define IPATH_S_SDMAENABLE 11
-#define IPATH_S_SDMAHALT 12
-#define IPATH_S_DISARM 31
-
-#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
-#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
-#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
-#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
-#define INFINIPATH_S_SDMAINTENABLE (1U << IPATH_S_SDMAINTENABLE)
-#define INFINIPATH_S_SDMASINGLEDESCRIPTOR \
- (1U << IPATH_S_SDMASINGLEDESCRIPTOR)
-#define INFINIPATH_S_SDMAENABLE (1U << IPATH_S_SDMAENABLE)
-#define INFINIPATH_S_SDMAHALT (1U << IPATH_S_SDMAHALT)
-#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
-
-/* kr_rcvctrl bits that are the same on multiple chips */
-#define INFINIPATH_R_PORTENABLE_SHIFT 0
-#define INFINIPATH_R_QPMAP_ENABLE (1ULL << 38)
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_SDMAINT 0x8000000000000000ULL
-#define INFINIPATH_I_SDMADISABLED 0x4000000000000000ULL
-#define INFINIPATH_I_ERROR 0x0000000080000000ULL
-#define INFINIPATH_I_SPIOSENT 0x0000000040000000ULL
-#define INFINIPATH_I_SPIOBUFAVAIL 0x0000000020000000ULL
-#define INFINIPATH_I_GPIO 0x0000000010000000ULL
-#define INFINIPATH_I_JINT 0x0000000004000000ULL
-
-/* kr_errorstatus, kr_errorclear, kr_errormask bits */
-#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
-#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
-#define INFINIPATH_E_RICRC 0x0000000000000004ULL
-#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
-#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
-#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
-#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
-#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
-#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
-#define INFINIPATH_E_REBP 0x0000000000000200ULL
-#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
-#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
-#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
-#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
-#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
-#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
-#define INFINIPATH_E_RHDR 0x0000000000010000ULL
-#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
-#define INFINIPATH_E_SENDSPECIALTRIGGER 0x0000000008000000ULL
-#define INFINIPATH_E_SDMADISABLED 0x0000000010000000ULL
-#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
-#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
-#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
-#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
-#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
-#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
-#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
-#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
-#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
-#define INFINIPATH_E_SENDBUFMISUSE 0x0000004000000000ULL
-#define INFINIPATH_E_SDMAGENMISMATCH 0x0000008000000000ULL
-#define INFINIPATH_E_SDMAOUTOFBOUND 0x0000010000000000ULL
-#define INFINIPATH_E_SDMATAILOUTOFBOUND 0x0000020000000000ULL
-#define INFINIPATH_E_SDMABASE 0x0000040000000000ULL
-#define INFINIPATH_E_SDMA1STDESC 0x0000080000000000ULL
-#define INFINIPATH_E_SDMARPYTAG 0x0000100000000000ULL
-#define INFINIPATH_E_SDMADWEN 0x0000200000000000ULL
-#define INFINIPATH_E_SDMAMISSINGDW 0x0000400000000000ULL
-#define INFINIPATH_E_SDMAUNEXPDATA 0x0000800000000000ULL
-#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
-#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
-#define INFINIPATH_E_RESET 0x0004000000000000ULL
-#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
-#define INFINIPATH_E_SDMADESCADDRMISALIGN 0x0010000000000000ULL
-#define INFINIPATH_E_INVALIDEEPCMD 0x0020000000000000ULL
-
-/*
- * this is used to print "common" packet errors only when the
- * __IPATH_ERRPKTDBG bit is set in ipath_debug.
- */
-#define INFINIPATH_E_PKTERRS ( INFINIPATH_E_SPKTLEN \
- | INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_RVCRC \
- | INFINIPATH_E_RICRC | INFINIPATH_E_RSHORTPKTLEN \
- | INFINIPATH_E_REBP )
-
-/* Convenience for decoding Send DMA errors */
-#define INFINIPATH_E_SDMAERRS ( \
- INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND | \
- INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE | \
- INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG | \
- INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW | \
- INFINIPATH_E_SDMAUNEXPDATA | \
- INFINIPATH_E_SDMADESCADDRMISALIGN | \
- INFINIPATH_E_SDMADISABLED | \
- INFINIPATH_E_SENDBUFMISUSE)
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
- * RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: expTID, 3: eagerTID
- * bit 4: flag buffer, 5: datainfo, 6: header info */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40
-#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44
-#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL
-#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL
-/* txe mem parity errors (shift by INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) */
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF 0x1ULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC 0x2ULL
-#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOLAUNCHFIFO 0x4ULL
-/* rxe mem parity errors (shift by INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) */
-#define INFINIPATH_HWE_RXEMEMPARITYERR_RCVBUF 0x01ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_LOOKUPQ 0x02ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_EXPTID 0x04ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID 0x08ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_FLAGBUF 0x10ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_DATAINFO 0x20ULL
-#define INFINIPATH_HWE_RXEMEMPARITYERR_HDRINFO 0x40ULL
-/* waldo specific -- find the rest in ipath_6110.c */
-#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
-/* 6120/7220 specific -- find the rest in ipath_6120.c and ipath_7220.c */
-#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
-
-/* kr_hwdiagctrl bits */
-#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL
-#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40
-#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL
-#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44
-#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL
-#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL
-#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL
-#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL
-#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL
-
-/* kr_ibcctrl bits */
-#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL
-#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0
-#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL
-#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
-#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
-#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
-/* wait for TS1, then go on */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
-#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
-#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
-#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
-#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
-#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
-#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
-#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
-#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20
-#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL
-#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32
-#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL
-#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36
-#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL
-#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40
-#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL
-#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
-
-/* kr_ibcstatus bits */
-#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
-#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
-
-#define INFINIPATH_IBCS_TXREADY 0x40000000
-#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
-/* link training states (shift by
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
-#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
-#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
-#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
-#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03
-#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04
-#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05
-#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08
-#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09
-#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a
-#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b
-#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
-#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
-#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
-/* link state machine states (shift by ibcs_ls_shift) */
-#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
-#define INFINIPATH_IBCS_L_STATE_INIT 0x1
-#define INFINIPATH_IBCS_L_STATE_ARM 0x2
-#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
-#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
-
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
-#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL
-#define INFINIPATH_EXTS_GPIOIN_SHIFT 48
-
-/* kr_extctrl bits */
-#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL
-#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32
-#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL
-#define INFINIPATH_EXTC_GPIOOE_SHIFT 48
-#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL
-#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL
-#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL
-#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL
-#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL
-#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL
-#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL
-#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL
-#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL
-#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL
-#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL
-#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
-#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
-
-/* kr_partitionkey bits */
-#define INFINIPATH_PKEY_SIZE 16
-#define INFINIPATH_PKEY_MASK 0xFFFF
-#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF
-
-/* kr_serdesconfig0 bits */
-#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
-#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
-/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL
-/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
-/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
-#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
-
-/* common kr_xgxsconfig bits (or safe in all, even if not implemented) */
-#define INFINIPATH_XGXS_RX_POL_SHIFT 19
-#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL
-
-
-/*
- * IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
- * PIO send buffers. This is well beyond anything currently
- * defined in the InfiniBand spec.
- */
-#define IPATH_PIO_MAXIBHDR 128
-
-typedef u64 ipath_err_t;
-
-/* The following change with the type of device, so
- * need to be part of the ipath_devdata struct, or
- * we could have problems plugging in devices of
- * different types (e.g. one HT, one PCIE)
- * in one system, to be managed by one driver.
- * On the other hand, this file is may also be included
- * by other code, so leave the declarations here
- * temporarily. Minor footprint issue if common-model
- * linker used, none if C89+ linker used.
- */
-
-/* mask of defined bits for various registers */
-extern u64 infinipath_i_bitsextant;
-extern ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant;
-
-/* masks that are different in various chips, or only exist in some chips */
-extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
-
-/*
- * These are the infinipath general register numbers (not offsets).
- * The kernel registers are used directly, those beyond the kernel
- * registers are calculated from one of the base registers. The use of
- * an integer type doesn't allow type-checking as thorough as, say,
- * an enum but allows for better hiding of chip differences.
- */
-typedef const u16 ipath_kreg, /* infinipath general registers */
- ipath_creg, /* infinipath counter registers */
- ipath_sreg; /* kernel-only, infinipath send registers */
-
-/*
- * These are the chip registers common to all infinipath chips, and
- * used both by the kernel and the diagnostics or other user code.
- * They are all implemented such that 64 bit accesses work.
- * Some implement no more than 32 bits. Because 64 bit reads
- * require 2 HT cmds on opteron, we access those with 32 bit
- * reads for efficiency (they are written as 64 bits, since
- * the extra 32 bits are nearly free on writes, and it slightly reduces
- * complexity). The rest are all accessed as 64 bits.
- */
-struct ipath_kregs {
- /* These are the 32 bit group */
- ipath_kreg kr_control;
- ipath_kreg kr_counterregbase;
- ipath_kreg kr_intmask;
- ipath_kreg kr_intstatus;
- ipath_kreg kr_pagealign;
- ipath_kreg kr_portcnt;
- ipath_kreg kr_rcvtidbase;
- ipath_kreg kr_rcvtidcnt;
- ipath_kreg kr_rcvegrbase;
- ipath_kreg kr_rcvegrcnt;
- ipath_kreg kr_scratch;
- ipath_kreg kr_sendctrl;
- ipath_kreg kr_sendpiobufbase;
- ipath_kreg kr_sendpiobufcnt;
- ipath_kreg kr_sendpiosize;
- ipath_kreg kr_sendregbase;
- ipath_kreg kr_userregbase;
- /* These are the 64 bit group */
- ipath_kreg kr_debugport;
- ipath_kreg kr_debugportselect;
- ipath_kreg kr_errorclear;
- ipath_kreg kr_errormask;
- ipath_kreg kr_errorstatus;
- ipath_kreg kr_extctrl;
- ipath_kreg kr_extstatus;
- ipath_kreg kr_gpio_clear;
- ipath_kreg kr_gpio_mask;
- ipath_kreg kr_gpio_out;
- ipath_kreg kr_gpio_status;
- ipath_kreg kr_hwdiagctrl;
- ipath_kreg kr_hwerrclear;
- ipath_kreg kr_hwerrmask;
- ipath_kreg kr_hwerrstatus;
- ipath_kreg kr_ibcctrl;
- ipath_kreg kr_ibcstatus;
- ipath_kreg kr_intblocked;
- ipath_kreg kr_intclear;
- ipath_kreg kr_interruptconfig;
- ipath_kreg kr_mdio;
- ipath_kreg kr_partitionkey;
- ipath_kreg kr_rcvbthqp;
- ipath_kreg kr_rcvbufbase;
- ipath_kreg kr_rcvbufsize;
- ipath_kreg kr_rcvctrl;
- ipath_kreg kr_rcvhdrcnt;
- ipath_kreg kr_rcvhdrentsize;
- ipath_kreg kr_rcvhdrsize;
- ipath_kreg kr_rcvintmembase;
- ipath_kreg kr_rcvintmemsize;
- ipath_kreg kr_revision;
- ipath_kreg kr_sendbuffererror;
- ipath_kreg kr_sendpioavailaddr;
- ipath_kreg kr_serdesconfig0;
- ipath_kreg kr_serdesconfig1;
- ipath_kreg kr_serdesstatus;
- ipath_kreg kr_txintmembase;
- ipath_kreg kr_txintmemsize;
- ipath_kreg kr_xgxsconfig;
- ipath_kreg kr_ibpllcfg;
- /* use these two (and the following N ports) only with
- * ipath_k*_kreg64_port(); not *kreg64() */
- ipath_kreg kr_rcvhdraddr;
- ipath_kreg kr_rcvhdrtailaddr;
-
- /* remaining registers are not present on all types of infinipath
- chips */
- ipath_kreg kr_rcvpktledcnt;
- ipath_kreg kr_pcierbuftestreg0;
- ipath_kreg kr_pcierbuftestreg1;
- ipath_kreg kr_pcieq0serdesconfig0;
- ipath_kreg kr_pcieq0serdesconfig1;
- ipath_kreg kr_pcieq0serdesstatus;
- ipath_kreg kr_pcieq1serdesconfig0;
- ipath_kreg kr_pcieq1serdesconfig1;
- ipath_kreg kr_pcieq1serdesstatus;
- ipath_kreg kr_hrtbt_guid;
- ipath_kreg kr_ibcddrctrl;
- ipath_kreg kr_ibcddrstatus;
- ipath_kreg kr_jintreload;
-
- /* send dma related regs */
- ipath_kreg kr_senddmabase;
- ipath_kreg kr_senddmalengen;
- ipath_kreg kr_senddmatail;
- ipath_kreg kr_senddmahead;
- ipath_kreg kr_senddmaheadaddr;
- ipath_kreg kr_senddmabufmask0;
- ipath_kreg kr_senddmabufmask1;
- ipath_kreg kr_senddmabufmask2;
- ipath_kreg kr_senddmastatus;
-
- /* SerDes related regs (IBA7220-only) */
- ipath_kreg kr_ibserdesctrl;
- ipath_kreg kr_ib_epbacc;
- ipath_kreg kr_ib_epbtrans;
- ipath_kreg kr_pcie_epbacc;
- ipath_kreg kr_pcie_epbtrans;
- ipath_kreg kr_ib_ddsrxeq;
-};
-
-struct ipath_cregs {
- ipath_creg cr_badformatcnt;
- ipath_creg cr_erricrccnt;
- ipath_creg cr_errlinkcnt;
- ipath_creg cr_errlpcrccnt;
- ipath_creg cr_errpkey;
- ipath_creg cr_errrcvflowctrlcnt;
- ipath_creg cr_err_rlencnt;
- ipath_creg cr_errslencnt;
- ipath_creg cr_errtidfull;
- ipath_creg cr_errtidvalid;
- ipath_creg cr_errvcrccnt;
- ipath_creg cr_ibstatuschange;
- ipath_creg cr_intcnt;
- ipath_creg cr_invalidrlencnt;
- ipath_creg cr_invalidslencnt;
- ipath_creg cr_lbflowstallcnt;
- ipath_creg cr_iblinkdowncnt;
- ipath_creg cr_iblinkerrrecovcnt;
- ipath_creg cr_ibsymbolerrcnt;
- ipath_creg cr_pktrcvcnt;
- ipath_creg cr_pktrcvflowctrlcnt;
- ipath_creg cr_pktsendcnt;
- ipath_creg cr_pktsendflowcnt;
- ipath_creg cr_portovflcnt;
- ipath_creg cr_rcvebpcnt;
- ipath_creg cr_rcvovflcnt;
- ipath_creg cr_rxdroppktcnt;
- ipath_creg cr_senddropped;
- ipath_creg cr_sendstallcnt;
- ipath_creg cr_sendunderruncnt;
- ipath_creg cr_unsupvlcnt;
- ipath_creg cr_wordrcvcnt;
- ipath_creg cr_wordsendcnt;
- ipath_creg cr_vl15droppedpktcnt;
- ipath_creg cr_rxotherlocalphyerrcnt;
- ipath_creg cr_excessbufferovflcnt;
- ipath_creg cr_locallinkintegrityerrcnt;
- ipath_creg cr_rxvlerrcnt;
- ipath_creg cr_rxdlidfltrcnt;
- ipath_creg cr_psstat;
- ipath_creg cr_psstart;
- ipath_creg cr_psinterval;
- ipath_creg cr_psrcvdatacount;
- ipath_creg cr_psrcvpktscount;
- ipath_creg cr_psxmitdatacount;
- ipath_creg cr_psxmitpktscount;
- ipath_creg cr_psxmitwaitcount;
-};
-
-#endif /* _IPATH_REGISTERS_H */
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/*
- * Convert the AETH RNR timeout code into the number of milliseconds.
- */
-const u32 ib_ipath_rnr_table[32] = {
- 656, /* 0 */
- 1, /* 1 */
- 1, /* 2 */
- 1, /* 3 */
- 1, /* 4 */
- 1, /* 5 */
- 1, /* 6 */
- 1, /* 7 */
- 1, /* 8 */
- 1, /* 9 */
- 1, /* A */
- 1, /* B */
- 1, /* C */
- 1, /* D */
- 2, /* E */
- 2, /* F */
- 3, /* 10 */
- 4, /* 11 */
- 6, /* 12 */
- 8, /* 13 */
- 11, /* 14 */
- 16, /* 15 */
- 21, /* 16 */
- 31, /* 17 */
- 41, /* 18 */
- 62, /* 19 */
- 82, /* 1A */
- 123, /* 1B */
- 164, /* 1C */
- 246, /* 1D */
- 328, /* 1E */
- 492 /* 1F */
-};
-
-/**
- * ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
- * @qp: the QP
- *
- * Called with the QP s_lock held and interrupts disabled.
- * XXX Use a simple list for now. We might need a priority
- * queue if we have lots of QPs waiting for RNR timeouts
- * but that should be rare.
- */
-void ipath_insert_rnr_queue(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-
- /* We already did a spin_lock_irqsave(), so just use spin_lock */
- spin_lock(&dev->pending_lock);
- if (list_empty(&dev->rnrwait))
- list_add(&qp->timerwait, &dev->rnrwait);
- else {
- struct list_head *l = &dev->rnrwait;
- struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
- timerwait);
-
- while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
- qp->s_rnr_timeout -= nqp->s_rnr_timeout;
- l = l->next;
- if (l->next == &dev->rnrwait) {
- nqp = NULL;
- break;
- }
- nqp = list_entry(l->next, struct ipath_qp,
- timerwait);
- }
- if (nqp)
- nqp->s_rnr_timeout -= qp->s_rnr_timeout;
- list_add(&qp->timerwait, l);
- }
- spin_unlock(&dev->pending_lock);
-}
-
-/**
- * ipath_init_sge - Validate a RWQE and fill in the SGE state
- * @qp: the QP
- *
- * Return 1 if OK.
- */
-int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
- u32 *lengthp, struct ipath_sge_state *ss)
-{
- int i, j, ret;
- struct ib_wc wc;
-
- *lengthp = 0;
- for (i = j = 0; i < wqe->num_sge; i++) {
- if (wqe->sg_list[i].length == 0)
- continue;
- /* Check LKEY */
- if (!ipath_lkey_ok(qp, j ? &ss->sg_list[j - 1] : &ss->sge,
- &wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE))
- goto bad_lkey;
- *lengthp += wqe->sg_list[i].length;
- j++;
- }
- ss->num_sge = j;
- ret = 1;
- goto bail;
-
-bad_lkey:
- memset(&wc, 0, sizeof(wc));
- wc.wr_id = wqe->wr_id;
- wc.status = IB_WC_LOC_PROT_ERR;
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- /* Signal solicited completion event. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_get_rwqe - copy the next RWQE into the QP's RWQE
- * @qp: the QP
- * @wr_id_only: update qp->r_wr_id only, not qp->r_sge
- *
- * Return 0 if no RWQE is available, otherwise return 1.
- *
- * Can be called from interrupt level.
- */
-int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
-{
- unsigned long flags;
- struct ipath_rq *rq;
- struct ipath_rwq *wq;
- struct ipath_srq *srq;
- struct ipath_rwqe *wqe;
- void (*handler)(struct ib_event *, void *);
- u32 tail;
- int ret;
-
- if (qp->ibqp.srq) {
- srq = to_isrq(qp->ibqp.srq);
- handler = srq->ibsrq.event_handler;
- rq = &srq->rq;
- } else {
- srq = NULL;
- handler = NULL;
- rq = &qp->r_rq;
- }
-
- spin_lock_irqsave(&rq->lock, flags);
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- ret = 0;
- goto unlock;
- }
-
- wq = rq->wq;
- tail = wq->tail;
- /* Validate tail before using it since it is user writable. */
- if (tail >= rq->size)
- tail = 0;
- do {
- if (unlikely(tail == wq->head)) {
- ret = 0;
- goto unlock;
- }
- /* Make sure entry is read after head index is read. */
- smp_rmb();
- wqe = get_rwqe_ptr(rq, tail);
- if (++tail >= rq->size)
- tail = 0;
- if (wr_id_only)
- break;
- qp->r_sge.sg_list = qp->r_sg_list;
- } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
- qp->r_wr_id = wqe->wr_id;
- wq->tail = tail;
-
- ret = 1;
- set_bit(IPATH_R_WRID_VALID, &qp->r_aflags);
- if (handler) {
- u32 n;
-
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- n = wq->head;
- if (n >= rq->size)
- n = 0;
- if (n < tail)
- n += rq->size - tail;
- else
- n -= tail;
- if (n < srq->limit) {
- struct ib_event ev;
-
- srq->limit = 0;
- spin_unlock_irqrestore(&rq->lock, flags);
- ev.device = qp->ibqp.device;
- ev.element.srq = qp->ibqp.srq;
- ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
- handler(&ev, srq->ibsrq.srq_context);
- goto bail;
- }
- }
-unlock:
- spin_unlock_irqrestore(&rq->lock, flags);
-bail:
- return ret;
-}
-
-/**
- * ipath_ruc_loopback - handle UC and RC lookback requests
- * @sqp: the sending QP
- *
- * This is called from ipath_do_send() to
- * forward a WQE addressed to the same HCA.
- * Note that although we are single threaded due to the tasklet, we still
- * have to protect against post_send(). We don't have to worry about
- * receive interrupts since this is a connected protocol and all packets
- * will pass through here.
- */
-static void ipath_ruc_loopback(struct ipath_qp *sqp)
-{
- struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
- struct ipath_qp *qp;
- struct ipath_swqe *wqe;
- struct ipath_sge *sge;
- unsigned long flags;
- struct ib_wc wc;
- u64 sdata;
- atomic64_t *maddr;
- enum ib_wc_status send_status;
-
- /*
- * Note that we check the responder QP state after
- * checking the requester's state.
- */
- qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
-
- spin_lock_irqsave(&sqp->s_lock, flags);
-
- /* Return if we are already busy processing a work request. */
- if ((sqp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
- !(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
- goto unlock;
-
- sqp->s_flags |= IPATH_S_BUSY;
-
-again:
- if (sqp->s_last == sqp->s_head)
- goto clr_busy;
- wqe = get_swqe_ptr(sqp, sqp->s_last);
-
- /* Return if it is not OK to start a new work reqeust. */
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
- goto clr_busy;
- /* We are in the error state, flush the work request. */
- send_status = IB_WC_WR_FLUSH_ERR;
- goto flush_send;
- }
-
- /*
- * We can rely on the entry not changing without the s_lock
- * being held until we update s_last.
- * We increment s_cur to indicate s_last is in progress.
- */
- if (sqp->s_last == sqp->s_cur) {
- if (++sqp->s_cur >= sqp->s_size)
- sqp->s_cur = 0;
- }
- spin_unlock_irqrestore(&sqp->s_lock, flags);
-
- if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- /*
- * For RC, the requester would timeout and retry so
- * shortcut the timeouts and just signal too many retries.
- */
- if (sqp->ibqp.qp_type == IB_QPT_RC)
- send_status = IB_WC_RETRY_EXC_ERR;
- else
- send_status = IB_WC_SUCCESS;
- goto serr;
- }
-
- memset(&wc, 0, sizeof wc);
- send_status = IB_WC_SUCCESS;
-
- sqp->s_sge.sge = wqe->sg_list[0];
- sqp->s_sge.sg_list = wqe->sg_list + 1;
- sqp->s_sge.num_sge = wqe->wr.num_sge;
- sqp->s_len = wqe->length;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND_WITH_IMM:
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = wqe->wr.ex.imm_data;
- /* FALLTHROUGH */
- case IB_WR_SEND:
- if (!ipath_get_rwqe(qp, 0))
- goto rnr_nak;
- break;
-
- case IB_WR_RDMA_WRITE_WITH_IMM:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
- goto inv_err;
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = wqe->wr.ex.imm_data;
- if (!ipath_get_rwqe(qp, 1))
- goto rnr_nak;
- /* FALLTHROUGH */
- case IB_WR_RDMA_WRITE:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
- goto inv_err;
- if (wqe->length == 0)
- break;
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length,
- wqe->wr.wr.rdma.remote_addr,
- wqe->wr.wr.rdma.rkey,
- IB_ACCESS_REMOTE_WRITE)))
- goto acc_err;
- break;
-
- case IB_WR_RDMA_READ:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ)))
- goto inv_err;
- if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length,
- wqe->wr.wr.rdma.remote_addr,
- wqe->wr.wr.rdma.rkey,
- IB_ACCESS_REMOTE_READ)))
- goto acc_err;
- qp->r_sge.sge = wqe->sg_list[0];
- qp->r_sge.sg_list = wqe->sg_list + 1;
- qp->r_sge.num_sge = wqe->wr.num_sge;
- break;
-
- case IB_WR_ATOMIC_CMP_AND_SWP:
- case IB_WR_ATOMIC_FETCH_AND_ADD:
- if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
- goto inv_err;
- if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64),
- wqe->wr.wr.atomic.remote_addr,
- wqe->wr.wr.atomic.rkey,
- IB_ACCESS_REMOTE_ATOMIC)))
- goto acc_err;
- /* Perform atomic OP and save result. */
- maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
- sdata = wqe->wr.wr.atomic.compare_add;
- *(u64 *) sqp->s_sge.sge.vaddr =
- (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ?
- (u64) atomic64_add_return(sdata, maddr) - sdata :
- (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
- sdata, wqe->wr.wr.atomic.swap);
- goto send_comp;
-
- default:
- send_status = IB_WC_LOC_QP_OP_ERR;
- goto serr;
- }
-
- sge = &sqp->s_sge.sge;
- while (sqp->s_len) {
- u32 len = sqp->s_len;
-
- if (len > sge->length)
- len = sge->length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--sqp->s_sge.num_sge)
- *sge = *sqp->s_sge.sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- sqp->s_len -= len;
- }
-
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- goto send_comp;
-
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- else
- wc.opcode = IB_WC_RECV;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.byte_len = wqe->length;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- wqe->wr.send_flags & IB_SEND_SOLICITED);
-
-send_comp:
- spin_lock_irqsave(&sqp->s_lock, flags);
-flush_send:
- sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
- ipath_send_complete(sqp, wqe, send_status);
- goto again;
-
-rnr_nak:
- /* Handle RNR NAK */
- if (qp->ibqp.qp_type == IB_QPT_UC)
- goto send_comp;
- /*
- * Note: we don't need the s_lock held since the BUSY flag
- * makes this single threaded.
- */
- if (sqp->s_rnr_retry == 0) {
- send_status = IB_WC_RNR_RETRY_EXC_ERR;
- goto serr;
- }
- if (sqp->s_rnr_retry_cnt < 7)
- sqp->s_rnr_retry--;
- spin_lock_irqsave(&sqp->s_lock, flags);
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_RECV_OK))
- goto clr_busy;
- sqp->s_flags |= IPATH_S_WAITING;
- dev->n_rnr_naks++;
- sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer];
- ipath_insert_rnr_queue(sqp);
- goto clr_busy;
-
-inv_err:
- send_status = IB_WC_REM_INV_REQ_ERR;
- wc.status = IB_WC_LOC_QP_OP_ERR;
- goto err;
-
-acc_err:
- send_status = IB_WC_REM_ACCESS_ERR;
- wc.status = IB_WC_LOC_PROT_ERR;
-err:
- /* responder goes to error state */
- ipath_rc_error(qp, wc.status);
-
-serr:
- spin_lock_irqsave(&sqp->s_lock, flags);
- ipath_send_complete(sqp, wqe, send_status);
- if (sqp->ibqp.qp_type == IB_QPT_RC) {
- int lastwqe = ipath_error_qp(sqp, IB_WC_WR_FLUSH_ERR);
-
- sqp->s_flags &= ~IPATH_S_BUSY;
- spin_unlock_irqrestore(&sqp->s_lock, flags);
- if (lastwqe) {
- struct ib_event ev;
-
- ev.device = sqp->ibqp.device;
- ev.element.qp = &sqp->ibqp;
- ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
- sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context);
- }
- goto done;
- }
-clr_busy:
- sqp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&sqp->s_lock, flags);
-done:
- if (qp && atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-}
-
-static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
-{
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
- qp->ibqp.qp_type == IB_QPT_SMI) {
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- }
-}
-
-/**
- * ipath_no_bufs_available - tell the layer driver we need buffers
- * @qp: the QP that caused the problem
- * @dev: the device we ran out of buffers on
- *
- * Called when we run out of PIO buffers.
- * If we are now in the error state, return zero to flush the
- * send work request.
- */
-static int ipath_no_bufs_available(struct ipath_qp *qp,
- struct ipath_ibdev *dev)
-{
- unsigned long flags;
- int ret = 1;
-
- /*
- * Note that as soon as want_buffer() is called and
- * possibly before it returns, ipath_ib_piobufavail()
- * could be called. Therefore, put QP on the piowait list before
- * enabling the PIO avail interrupt.
- */
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
- dev->n_piowait++;
- qp->s_flags |= IPATH_S_WAITING;
- qp->s_flags &= ~IPATH_S_BUSY;
- spin_lock(&dev->pending_lock);
- if (list_empty(&qp->piowait))
- list_add_tail(&qp->piowait, &dev->piowait);
- spin_unlock(&dev->pending_lock);
- } else
- ret = 0;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- if (ret)
- want_buffer(dev->dd, qp);
- return ret;
-}
-
-/**
- * ipath_make_grh - construct a GRH header
- * @dev: a pointer to the ipath device
- * @hdr: a pointer to the GRH header being constructed
- * @grh: the global route address to send to
- * @hwords: the number of 32 bit words of header being sent
- * @nwords: the number of 32 bit words of data being sent
- *
- * Return the size of the header in 32 bit words.
- */
-u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
- struct ib_global_route *grh, u32 hwords, u32 nwords)
-{
- hdr->version_tclass_flow =
- cpu_to_be32((6 << 28) |
- (grh->traffic_class << 20) |
- grh->flow_label);
- hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2);
- /* next_hdr is defined by C8-7 in ch. 8.4.1 */
- hdr->next_hdr = 0x1B;
- hdr->hop_limit = grh->hop_limit;
- /* The SGID is 32-bit aligned. */
- hdr->sgid.global.subnet_prefix = dev->gid_prefix;
- hdr->sgid.global.interface_id = dev->dd->ipath_guid;
- hdr->dgid = grh->dgid;
-
- /* GRH header size in 32-bit words. */
- return sizeof(struct ib_grh) / sizeof(u32);
-}
-
-void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 bth0, u32 bth2)
-{
- u16 lrh0;
- u32 nwords;
- u32 extra_bytes;
-
- /* Construct the header. */
- extra_bytes = -qp->s_cur_size & 3;
- nwords = (qp->s_cur_size + extra_bytes) >> 2;
- lrh0 = IPATH_LRH_BTH;
- if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
- qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
- &qp->remote_ah_attr.grh,
- qp->s_hdrwords, nwords);
- lrh0 = IPATH_LRH_GRH;
- }
- lrh0 |= qp->remote_ah_attr.sl << 4;
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC);
- qp->s_hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid |
- qp->remote_ah_attr.src_path_bits);
- bth0 |= ipath_get_pkey(dev->dd, qp->s_pkey_index);
- bth0 |= extra_bytes << 20;
- ohdr->bth[0] = cpu_to_be32(bth0 | (1 << 22));
- ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
- ohdr->bth[2] = cpu_to_be32(bth2);
-}
-
-/**
- * ipath_do_send - perform a send on a QP
- * @data: contains a pointer to the QP
- *
- * Process entries in the send work queue until credit or queue is
- * exhausted. Only allow one CPU to send a packet per QP (tasklet).
- * Otherwise, two threads could send packets out of order.
- */
-void ipath_do_send(unsigned long data)
-{
- struct ipath_qp *qp = (struct ipath_qp *)data;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- int (*make_req)(struct ipath_qp *qp);
- unsigned long flags;
-
- if ((qp->ibqp.qp_type == IB_QPT_RC ||
- qp->ibqp.qp_type == IB_QPT_UC) &&
- qp->remote_ah_attr.dlid == dev->dd->ipath_lid) {
- ipath_ruc_loopback(qp);
- goto bail;
- }
-
- if (qp->ibqp.qp_type == IB_QPT_RC)
- make_req = ipath_make_rc_req;
- else if (qp->ibqp.qp_type == IB_QPT_UC)
- make_req = ipath_make_uc_req;
- else
- make_req = ipath_make_ud_req;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- /* Return if we are already busy processing a work request. */
- if ((qp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
- !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND)) {
- spin_unlock_irqrestore(&qp->s_lock, flags);
- goto bail;
- }
-
- qp->s_flags |= IPATH_S_BUSY;
-
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
-again:
- /* Check for a constructed packet to be sent. */
- if (qp->s_hdrwords != 0) {
- /*
- * If no PIO bufs are available, return. An interrupt will
- * call ipath_ib_piobufavail() when one is available.
- */
- if (ipath_verbs_send(qp, &qp->s_hdr, qp->s_hdrwords,
- qp->s_cur_sge, qp->s_cur_size)) {
- if (ipath_no_bufs_available(qp, dev))
- goto bail;
- }
- dev->n_unicast_xmit++;
- /* Record that we sent the packet and s_hdr is empty. */
- qp->s_hdrwords = 0;
- }
-
- if (make_req(qp))
- goto again;
-
-bail:;
-}
-
-/*
- * This should be called with s_lock held.
- */
-void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
- enum ib_wc_status status)
-{
- u32 old_last, last;
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
- return;
-
- /* See ch. 11.2.4.1 and 10.7.3.1 */
- if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
- (wqe->wr.send_flags & IB_SEND_SIGNALED) ||
- status != IB_WC_SUCCESS) {
- struct ib_wc wc;
-
- memset(&wc, 0, sizeof wc);
- wc.wr_id = wqe->wr.wr_id;
- wc.status = status;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.qp = &qp->ibqp;
- if (status == IB_WC_SUCCESS)
- wc.byte_len = wqe->length;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc,
- status != IB_WC_SUCCESS);
- }
-
- old_last = last = qp->s_last;
- if (++last >= qp->s_size)
- last = 0;
- qp->s_last = last;
- if (qp->s_cur == old_last)
- qp->s_cur = last;
- if (qp->s_tail == old_last)
- qp->s_tail = last;
- if (qp->state == IB_QPS_SQD && last == qp->s_cur)
- qp->s_draining = 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-#define SDMA_DESCQ_SZ PAGE_SIZE /* 256 entries per 4KB page */
-
-static void vl15_watchdog_enq(struct ipath_devdata *dd)
-{
- /* ipath_sdma_lock must already be held */
- if (atomic_inc_return(&dd->ipath_sdma_vl15_count) == 1) {
- unsigned long interval = (HZ + 19) / 20;
- dd->ipath_sdma_vl15_timer.expires = jiffies + interval;
- add_timer(&dd->ipath_sdma_vl15_timer);
- }
-}
-
-static void vl15_watchdog_deq(struct ipath_devdata *dd)
-{
- /* ipath_sdma_lock must already be held */
- if (atomic_dec_return(&dd->ipath_sdma_vl15_count) != 0) {
- unsigned long interval = (HZ + 19) / 20;
- mod_timer(&dd->ipath_sdma_vl15_timer, jiffies + interval);
- } else {
- del_timer(&dd->ipath_sdma_vl15_timer);
- }
-}
-
-static void vl15_watchdog_timeout(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (atomic_read(&dd->ipath_sdma_vl15_count) != 0) {
- ipath_dbg("vl15 watchdog timeout - clearing\n");
- ipath_cancel_sends(dd, 1);
- ipath_hol_down(dd);
- } else {
- ipath_dbg("vl15 watchdog timeout - "
- "condition already cleared\n");
- }
-}
-
-static void unmap_desc(struct ipath_devdata *dd, unsigned head)
-{
- __le64 *descqp = &dd->ipath_sdma_descq[head].qw[0];
- u64 desc[2];
- dma_addr_t addr;
- size_t len;
-
- desc[0] = le64_to_cpu(descqp[0]);
- desc[1] = le64_to_cpu(descqp[1]);
-
- addr = (desc[1] << 32) | (desc[0] >> 32);
- len = (desc[0] >> 14) & (0x7ffULL << 2);
- dma_unmap_single(&dd->pcidev->dev, addr, len, DMA_TO_DEVICE);
-}
-
-/*
- * ipath_sdma_lock should be locked before calling this.
- */
-int ipath_sdma_make_progress(struct ipath_devdata *dd)
-{
- struct list_head *lp = NULL;
- struct ipath_sdma_txreq *txp = NULL;
- u16 dmahead;
- u16 start_idx = 0;
- int progress = 0;
-
- if (!list_empty(&dd->ipath_sdma_activelist)) {
- lp = dd->ipath_sdma_activelist.next;
- txp = list_entry(lp, struct ipath_sdma_txreq, list);
- start_idx = txp->start_idx;
- }
-
- /*
- * Read the SDMA head register in order to know that the
- * interrupt clear has been written to the chip.
- * Otherwise, we may not get an interrupt for the last
- * descriptor in the queue.
- */
- dmahead = (u16)ipath_read_kreg32(dd, dd->ipath_kregs->kr_senddmahead);
- /* sanity check return value for error handling (chip reset, etc.) */
- if (dmahead >= dd->ipath_sdma_descq_cnt)
- goto done;
-
- while (dd->ipath_sdma_descq_head != dmahead) {
- if (txp && txp->flags & IPATH_SDMA_TXREQ_F_FREEDESC &&
- dd->ipath_sdma_descq_head == start_idx) {
- unmap_desc(dd, dd->ipath_sdma_descq_head);
- start_idx++;
- if (start_idx == dd->ipath_sdma_descq_cnt)
- start_idx = 0;
- }
-
- /* increment free count and head */
- dd->ipath_sdma_descq_removed++;
- if (++dd->ipath_sdma_descq_head == dd->ipath_sdma_descq_cnt)
- dd->ipath_sdma_descq_head = 0;
-
- if (txp && txp->next_descq_idx == dd->ipath_sdma_descq_head) {
- /* move to notify list */
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(lp, &dd->ipath_sdma_notifylist);
- if (!list_empty(&dd->ipath_sdma_activelist)) {
- lp = dd->ipath_sdma_activelist.next;
- txp = list_entry(lp, struct ipath_sdma_txreq,
- list);
- start_idx = txp->start_idx;
- } else {
- lp = NULL;
- txp = NULL;
- }
- }
- progress = 1;
- }
-
- if (progress)
- tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
-
-done:
- return progress;
-}
-
-static void ipath_sdma_notify(struct ipath_devdata *dd, struct list_head *list)
-{
- struct ipath_sdma_txreq *txp, *txp_next;
-
- list_for_each_entry_safe(txp, txp_next, list, list) {
- list_del_init(&txp->list);
-
- if (txp->callback)
- (*txp->callback)(txp->callback_cookie,
- txp->callback_status);
- }
-}
-
-static void sdma_notify_taskbody(struct ipath_devdata *dd)
-{
- unsigned long flags;
- struct list_head list;
-
- INIT_LIST_HEAD(&list);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- list_splice_init(&dd->ipath_sdma_notifylist, &list);
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- ipath_sdma_notify(dd, &list);
-
- /*
- * The IB verbs layer needs to see the callback before getting
- * the call to ipath_ib_piobufavail() because the callback
- * handles releasing resources the next send will need.
- * Otherwise, we could do these calls in
- * ipath_sdma_make_progress().
- */
- ipath_ib_piobufavail(dd->verbs_dev);
-}
-
-static void sdma_notify_task(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
-
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- sdma_notify_taskbody(dd);
-}
-
-static void dump_sdma_state(struct ipath_devdata *dd)
-{
- unsigned long reg;
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus);
- ipath_cdbg(VERBOSE, "kr_senddmastatus: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendctrl);
- ipath_cdbg(VERBOSE, "kr_sendctrl: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask0);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask0: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask1);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask1: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask2);
- ipath_cdbg(VERBOSE, "kr_senddmabufmask2: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
- ipath_cdbg(VERBOSE, "kr_senddmatail: 0x%016lx\n", reg);
-
- reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
- ipath_cdbg(VERBOSE, "kr_senddmahead: 0x%016lx\n", reg);
-}
-
-static void sdma_abort_task(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
- u64 status;
- unsigned long flags;
-
- if (test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- return;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- status = dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK;
-
- /* nothing to do */
- if (status == IPATH_SDMA_ABORT_NONE)
- goto unlock;
-
- /* ipath_sdma_abort() is done, waiting for interrupt */
- if (status == IPATH_SDMA_ABORT_DISARMED) {
- if (time_before(jiffies, dd->ipath_sdma_abort_intr_timeout))
- goto resched_noprint;
- /* give up, intr got lost somewhere */
- ipath_dbg("give up waiting for SDMADISABLED intr\n");
- __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- status = IPATH_SDMA_ABORT_ABORTED;
- }
-
- /* everything is stopped, time to clean up and restart */
- if (status == IPATH_SDMA_ABORT_ABORTED) {
- struct ipath_sdma_txreq *txp, *txpnext;
- u64 hwstatus;
- int notify = 0;
-
- hwstatus = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_senddmastatus);
-
- if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
- IPATH_SDMA_STATUS_ABORT_IN_PROG |
- IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
- !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
- if (dd->ipath_sdma_reset_wait > 0) {
- /* not done shutting down sdma */
- --dd->ipath_sdma_reset_wait;
- goto resched;
- }
- ipath_cdbg(VERBOSE, "gave up waiting for quiescent "
- "status after SDMA reset, continuing\n");
- dump_sdma_state(dd);
- }
-
- /* dequeue all "sent" requests */
- list_for_each_entry_safe(txp, txpnext,
- &dd->ipath_sdma_activelist, list) {
- txp->callback_status = IPATH_SDMA_TXREQ_S_ABORTED;
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
- notify = 1;
- }
- if (notify)
- tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
-
- /* reset our notion of head and tail */
- dd->ipath_sdma_descq_tail = 0;
- dd->ipath_sdma_descq_head = 0;
- dd->ipath_sdma_head_dma[0] = 0;
- dd->ipath_sdma_generation = 0;
- dd->ipath_sdma_descq_removed = dd->ipath_sdma_descq_added;
-
- /* Reset SendDmaLenGen */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen,
- (u64) dd->ipath_sdma_descq_cnt | (1ULL << 18));
-
- /* done with sdma state for a bit */
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- /*
- * Don't restart sdma here (with the exception
- * below). Wait until link is up to ACTIVE. VL15 MADs
- * used to bring the link up use PIO, and multiple link
- * transitions otherwise cause the sdma engine to be
- * stopped and started multiple times.
- * The disable is done here, including the shadow,
- * so the state is kept consistent.
- * See ipath_restart_sdma() for the actual starting
- * of sdma.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* make sure I see next message */
- dd->ipath_sdma_abort_jiffies = 0;
-
- /*
- * Not everything that takes SDMA offline is a link
- * status change. If the link was up, restart SDMA.
- */
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- ipath_restart_sdma(dd);
-
- goto done;
- }
-
-resched:
- /*
- * for now, keep spinning
- * JAG - this is bad to just have default be a loop without
- * state change
- */
- if (time_after(jiffies, dd->ipath_sdma_abort_jiffies)) {
- ipath_dbg("looping with status 0x%08lx\n",
- dd->ipath_sdma_status);
- dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
- }
-resched_noprint:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
- return;
-
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-done:
- return;
-}
-
-/*
- * This is called from interrupt context.
- */
-void ipath_sdma_intr(struct ipath_devdata *dd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- (void) ipath_sdma_make_progress(dd);
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-}
-
-static int alloc_sdma(struct ipath_devdata *dd)
-{
- int ret = 0;
-
- /* Allocate memory for SendDMA descriptor FIFO */
- dd->ipath_sdma_descq = dma_alloc_coherent(&dd->pcidev->dev,
- SDMA_DESCQ_SZ, &dd->ipath_sdma_descq_phys, GFP_KERNEL);
-
- if (!dd->ipath_sdma_descq) {
- ipath_dev_err(dd, "failed to allocate SendDMA descriptor "
- "FIFO memory\n");
- ret = -ENOMEM;
- goto done;
- }
-
- dd->ipath_sdma_descq_cnt =
- SDMA_DESCQ_SZ / sizeof(struct ipath_sdma_desc);
-
- /* Allocate memory for DMA of head register to memory */
- dd->ipath_sdma_head_dma = dma_alloc_coherent(&dd->pcidev->dev,
- PAGE_SIZE, &dd->ipath_sdma_head_phys, GFP_KERNEL);
- if (!dd->ipath_sdma_head_dma) {
- ipath_dev_err(dd, "failed to allocate SendDMA head memory\n");
- ret = -ENOMEM;
- goto cleanup_descq;
- }
- dd->ipath_sdma_head_dma[0] = 0;
-
- init_timer(&dd->ipath_sdma_vl15_timer);
- dd->ipath_sdma_vl15_timer.function = vl15_watchdog_timeout;
- dd->ipath_sdma_vl15_timer.data = (unsigned long)dd;
- atomic_set(&dd->ipath_sdma_vl15_count, 0);
-
- goto done;
-
-cleanup_descq:
- dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
- (void *)dd->ipath_sdma_descq, dd->ipath_sdma_descq_phys);
- dd->ipath_sdma_descq = NULL;
- dd->ipath_sdma_descq_phys = 0;
-done:
- return ret;
-}
-
-int setup_sdma(struct ipath_devdata *dd)
-{
- int ret = 0;
- unsigned i, n;
- u64 tmp64;
- u64 senddmabufmask[3] = { 0 };
- unsigned long flags;
-
- ret = alloc_sdma(dd);
- if (ret)
- goto done;
-
- if (!dd->ipath_sdma_descq) {
- ipath_dev_err(dd, "SendDMA memory not allocated\n");
- goto done;
- }
-
- /*
- * Set initial status as if we had been up, then gone down.
- * This lets initial start on transition to ACTIVE be the
- * same as restart after link flap.
- */
- dd->ipath_sdma_status = IPATH_SDMA_ABORT_ABORTED;
- dd->ipath_sdma_abort_jiffies = 0;
- dd->ipath_sdma_generation = 0;
- dd->ipath_sdma_descq_tail = 0;
- dd->ipath_sdma_descq_head = 0;
- dd->ipath_sdma_descq_removed = 0;
- dd->ipath_sdma_descq_added = 0;
-
- /* Set SendDmaBase */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase,
- dd->ipath_sdma_descq_phys);
- /* Set SendDmaLenGen */
- tmp64 = dd->ipath_sdma_descq_cnt;
- tmp64 |= 1<<18; /* enable generation checking */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, tmp64);
- /* Set SendDmaTail */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail,
- dd->ipath_sdma_descq_tail);
- /* Set SendDmaHeadAddr */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
- dd->ipath_sdma_head_phys);
-
- /*
- * Reserve all the former "kernel" piobufs, using high number range
- * so we get as many 4K buffers as possible
- */
- n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
- i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved;
- ipath_chg_pioavailkernel(dd, i, n - i , 0);
- for (; i < n; ++i) {
- unsigned word = i / 64;
- unsigned bit = i & 63;
- BUG_ON(word >= 3);
- senddmabufmask[word] |= 1ULL << bit;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
- senddmabufmask[0]);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
- senddmabufmask[1]);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2,
- senddmabufmask[2]);
-
- INIT_LIST_HEAD(&dd->ipath_sdma_activelist);
- INIT_LIST_HEAD(&dd->ipath_sdma_notifylist);
-
- tasklet_init(&dd->ipath_sdma_notify_task, sdma_notify_task,
- (unsigned long) dd);
- tasklet_init(&dd->ipath_sdma_abort_task, sdma_abort_task,
- (unsigned long) dd);
-
- /*
- * No use to turn on SDMA here, as link is probably not ACTIVE
- * Just mark it RUNNING and enable the interrupt, and let the
- * ipath_restart_sdma() on link transition to ACTIVE actually
- * enable it.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_SDMAINTENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- __set_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
-done:
- return ret;
-}
-
-void teardown_sdma(struct ipath_devdata *dd)
-{
- struct ipath_sdma_txreq *txp, *txpnext;
- unsigned long flags;
- dma_addr_t sdma_head_phys = 0;
- dma_addr_t sdma_descq_phys = 0;
- void *sdma_descq = NULL;
- void *sdma_head_dma = NULL;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- __clear_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
- __set_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- __set_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- tasklet_kill(&dd->ipath_sdma_abort_task);
- tasklet_kill(&dd->ipath_sdma_notify_task);
-
- /* turn off sdma */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- /* dequeue all "sent" requests */
- list_for_each_entry_safe(txp, txpnext, &dd->ipath_sdma_activelist,
- list) {
- txp->callback_status = IPATH_SDMA_TXREQ_S_SHUTDOWN;
- if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_deq(dd);
- list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
- }
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- sdma_notify_taskbody(dd);
-
- del_timer_sync(&dd->ipath_sdma_vl15_timer);
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- dd->ipath_sdma_abort_jiffies = 0;
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1, 0);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2, 0);
-
- if (dd->ipath_sdma_head_dma) {
- sdma_head_dma = (void *) dd->ipath_sdma_head_dma;
- sdma_head_phys = dd->ipath_sdma_head_phys;
- dd->ipath_sdma_head_dma = NULL;
- dd->ipath_sdma_head_phys = 0;
- }
-
- if (dd->ipath_sdma_descq) {
- sdma_descq = dd->ipath_sdma_descq;
- sdma_descq_phys = dd->ipath_sdma_descq_phys;
- dd->ipath_sdma_descq = NULL;
- dd->ipath_sdma_descq_phys = 0;
- }
-
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- if (sdma_head_dma)
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- sdma_head_dma, sdma_head_phys);
-
- if (sdma_descq)
- dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
- sdma_descq, sdma_descq_phys);
-}
-
-/*
- * [Re]start SDMA, if we use it, and it's not already OK.
- * This is called on transition to link ACTIVE, either the first or
- * subsequent times.
- */
-void ipath_restart_sdma(struct ipath_devdata *dd)
-{
- unsigned long flags;
- int needed = 1;
-
- if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- goto bail;
-
- /*
- * First, make sure we should, which is to say,
- * check that we are "RUNNING" (not in teardown)
- * and not "SHUTDOWN"
- */
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- if (!test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)
- || test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
- needed = 0;
- else {
- __clear_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
- __clear_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
- __clear_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
- }
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
- if (!needed) {
- ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
- dd->ipath_sdma_status);
- goto bail;
- }
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- /*
- * First clear, just to be safe. Enable is only done
- * in chip on 0->1 transition
- */
- dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- dd->ipath_sendctrl |= INFINIPATH_S_SDMAENABLE;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
-
- /* notify upper layers */
- ipath_ib_piobufavail(dd->verbs_dev);
-
-bail:
- return;
-}
-
-static inline void make_sdma_desc(struct ipath_devdata *dd,
- u64 *sdmadesc, u64 addr, u64 dwlen, u64 dwoffset)
-{
- WARN_ON(addr & 3);
- /* SDmaPhyAddr[47:32] */
- sdmadesc[1] = addr >> 32;
- /* SDmaPhyAddr[31:0] */
- sdmadesc[0] = (addr & 0xfffffffcULL) << 32;
- /* SDmaGeneration[1:0] */
- sdmadesc[0] |= (dd->ipath_sdma_generation & 3ULL) << 30;
- /* SDmaDwordCount[10:0] */
- sdmadesc[0] |= (dwlen & 0x7ffULL) << 16;
- /* SDmaBufOffset[12:2] */
- sdmadesc[0] |= dwoffset & 0x7ffULL;
-}
-
-/*
- * This function queues one IB packet onto the send DMA queue per call.
- * The caller is responsible for checking:
- * 1) The number of send DMA descriptor entries is less than the size of
- * the descriptor queue.
- * 2) The IB SGE addresses and lengths are 32-bit aligned
- * (except possibly the last SGE's length)
- * 3) The SGE addresses are suitable for passing to dma_map_single().
- */
-int ipath_sdma_verbs_send(struct ipath_devdata *dd,
- struct ipath_sge_state *ss, u32 dwords,
- struct ipath_verbs_txreq *tx)
-{
-
- unsigned long flags;
- struct ipath_sge *sge;
- int ret = 0;
- u16 tail;
- __le64 *descqp;
- u64 sdmadesc[2];
- u32 dwoffset;
- dma_addr_t addr;
-
- if ((tx->map_len + (dwords<<2)) > dd->ipath_ibmaxlen) {
- ipath_dbg("packet size %X > ibmax %X, fail\n",
- tx->map_len + (dwords<<2), dd->ipath_ibmaxlen);
- ret = -EMSGSIZE;
- goto fail;
- }
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
-retry:
- if (unlikely(test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status))) {
- ret = -EBUSY;
- goto unlock;
- }
-
- if (tx->txreq.sg_count > ipath_sdma_descq_freecnt(dd)) {
- if (ipath_sdma_make_progress(dd))
- goto retry;
- ret = -ENOBUFS;
- goto unlock;
- }
-
- addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
- tx->map_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, addr))
- goto ioerr;
-
- dwoffset = tx->map_len >> 2;
- make_sdma_desc(dd, sdmadesc, (u64) addr, dwoffset, 0);
-
- /* SDmaFirstDesc */
- sdmadesc[0] |= 1ULL << 12;
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
- sdmadesc[0] |= 1ULL << 14; /* SDmaUseLargeBuf */
-
- /* write to the descq */
- tail = dd->ipath_sdma_descq_tail;
- descqp = &dd->ipath_sdma_descq[tail].qw[0];
- *descqp++ = cpu_to_le64(sdmadesc[0]);
- *descqp++ = cpu_to_le64(sdmadesc[1]);
-
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEDESC)
- tx->txreq.start_idx = tail;
-
- /* increment the tail */
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- descqp = &dd->ipath_sdma_descq[0].qw[0];
- ++dd->ipath_sdma_generation;
- }
-
- sge = &ss->sge;
- while (dwords) {
- u32 dw;
- u32 len;
-
- len = dwords << 2;
- if (len > sge->length)
- len = sge->length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- dw = (len + 3) >> 2;
- addr = dma_map_single(&dd->pcidev->dev, sge->vaddr, dw << 2,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, addr))
- goto unmap;
- make_sdma_desc(dd, sdmadesc, (u64) addr, dw, dwoffset);
- /* SDmaUseLargeBuf has to be set in every descriptor */
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
- sdmadesc[0] |= 1ULL << 14;
- /* write to the descq */
- *descqp++ = cpu_to_le64(sdmadesc[0]);
- *descqp++ = cpu_to_le64(sdmadesc[1]);
-
- /* increment the tail */
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- descqp = &dd->ipath_sdma_descq[0].qw[0];
- ++dd->ipath_sdma_generation;
- }
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
-
- dwoffset += dw;
- dwords -= dw;
- }
-
- if (!tail)
- descqp = &dd->ipath_sdma_descq[dd->ipath_sdma_descq_cnt].qw[0];
- descqp -= 2;
- /* SDmaLastDesc */
- descqp[0] |= cpu_to_le64(1ULL << 11);
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_INTREQ) {
- /* SDmaIntReq */
- descqp[0] |= cpu_to_le64(1ULL << 15);
- }
-
- /* Commit writes to memory and advance the tail on the chip */
- wmb();
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
-
- tx->txreq.next_descq_idx = tail;
- tx->txreq.callback_status = IPATH_SDMA_TXREQ_S_OK;
- dd->ipath_sdma_descq_tail = tail;
- dd->ipath_sdma_descq_added += tx->txreq.sg_count;
- list_add_tail(&tx->txreq.list, &dd->ipath_sdma_activelist);
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_VL15)
- vl15_watchdog_enq(dd);
- goto unlock;
-
-unmap:
- while (tail != dd->ipath_sdma_descq_tail) {
- if (!tail)
- tail = dd->ipath_sdma_descq_cnt - 1;
- else
- tail--;
- unmap_desc(dd, tail);
- }
-ioerr:
- ret = -EIO;
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-fail:
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include "ipath_verbs.h"
-
-/**
- * ipath_post_srq_receive - post a receive on a shared receive queue
- * @ibsrq: the SRQ to post the receive on
- * @wr: the list of work requests to post
- * @bad_wr: the first WR to cause a problem is put here
- *
- * This may be called from interrupt context.
- */
-int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_rwq *wq;
- unsigned long flags;
- int ret;
-
- for (; wr; wr = wr->next) {
- struct ipath_rwqe *wqe;
- u32 next;
- int i;
-
- if ((unsigned) wr->num_sge > srq->rq.max_sge) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&srq->rq.lock, flags);
- wq = srq->rq.wq;
- next = wq->head + 1;
- if (next >= srq->rq.size)
- next = 0;
- if (next == wq->tail) {
- spin_unlock_irqrestore(&srq->rq.lock, flags);
- *bad_wr = wr;
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_rwqe_ptr(&srq->rq, wq->head);
- wqe->wr_id = wr->wr_id;
- wqe->num_sge = wr->num_sge;
- for (i = 0; i < wr->num_sge; i++)
- wqe->sg_list[i] = wr->sg_list[i];
- /* Make sure queue entry is written before the head index. */
- smp_wmb();
- wq->head = next;
- spin_unlock_irqrestore(&srq->rq.lock, flags);
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_create_srq - create a shared receive queue
- * @ibpd: the protection domain of the SRQ to create
- * @srq_init_attr: the attributes of the SRQ
- * @udata: data from libipathverbs when creating a user SRQ
- */
-struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
- struct ib_srq_init_attr *srq_init_attr,
- struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibpd->device);
- struct ipath_srq *srq;
- u32 sz;
- struct ib_srq *ret;
-
- if (srq_init_attr->srq_type != IB_SRQT_BASIC) {
- ret = ERR_PTR(-ENOSYS);
- goto done;
- }
-
- if (srq_init_attr->attr.max_wr == 0) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- if ((srq_init_attr->attr.max_sge > ib_ipath_max_srq_sges) ||
- (srq_init_attr->attr.max_wr > ib_ipath_max_srq_wrs)) {
- ret = ERR_PTR(-EINVAL);
- goto done;
- }
-
- srq = kmalloc(sizeof(*srq), GFP_KERNEL);
- if (!srq) {
- ret = ERR_PTR(-ENOMEM);
- goto done;
- }
-
- /*
- * Need to use vmalloc() if we want to support large #s of entries.
- */
- srq->rq.size = srq_init_attr->attr.max_wr + 1;
- srq->rq.max_sge = srq_init_attr->attr.max_sge;
- sz = sizeof(struct ib_sge) * srq->rq.max_sge +
- sizeof(struct ipath_rwqe);
- srq->rq.wq = vmalloc_user(sizeof(struct ipath_rwq) + srq->rq.size * sz);
- if (!srq->rq.wq) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_srq;
- }
-
- /*
- * Return the address of the RWQ as the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->outlen >= sizeof(__u64)) {
- int err;
- u32 s = sizeof(struct ipath_rwq) + srq->rq.size * sz;
-
- srq->ip =
- ipath_create_mmap_info(dev, s,
- ibpd->uobject->context,
- srq->rq.wq);
- if (!srq->ip) {
- ret = ERR_PTR(-ENOMEM);
- goto bail_wq;
- }
-
- err = ib_copy_to_udata(udata, &srq->ip->offset,
- sizeof(srq->ip->offset));
- if (err) {
- ret = ERR_PTR(err);
- goto bail_ip;
- }
- } else
- srq->ip = NULL;
-
- /*
- * ib_create_srq() will initialize srq->ibsrq.
- */
- spin_lock_init(&srq->rq.lock);
- srq->rq.wq->head = 0;
- srq->rq.wq->tail = 0;
- srq->limit = srq_init_attr->attr.srq_limit;
-
- spin_lock(&dev->n_srqs_lock);
- if (dev->n_srqs_allocated == ib_ipath_max_srqs) {
- spin_unlock(&dev->n_srqs_lock);
- ret = ERR_PTR(-ENOMEM);
- goto bail_ip;
- }
-
- dev->n_srqs_allocated++;
- spin_unlock(&dev->n_srqs_lock);
-
- if (srq->ip) {
- spin_lock_irq(&dev->pending_lock);
- list_add(&srq->ip->pending_mmaps, &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
-
- ret = &srq->ibsrq;
- goto done;
-
-bail_ip:
- kfree(srq->ip);
-bail_wq:
- vfree(srq->rq.wq);
-bail_srq:
- kfree(srq);
-done:
- return ret;
-}
-
-/**
- * ipath_modify_srq - modify a shared receive queue
- * @ibsrq: the SRQ to modify
- * @attr: the new attributes of the SRQ
- * @attr_mask: indicates which attributes to modify
- * @udata: user data for ipathverbs.so
- */
-int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
- enum ib_srq_attr_mask attr_mask,
- struct ib_udata *udata)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_rwq *wq;
- int ret = 0;
-
- if (attr_mask & IB_SRQ_MAX_WR) {
- struct ipath_rwq *owq;
- struct ipath_rwqe *p;
- u32 sz, size, n, head, tail;
-
- /* Check that the requested sizes are below the limits. */
- if ((attr->max_wr > ib_ipath_max_srq_wrs) ||
- ((attr_mask & IB_SRQ_LIMIT) ?
- attr->srq_limit : srq->limit) > attr->max_wr) {
- ret = -EINVAL;
- goto bail;
- }
-
- sz = sizeof(struct ipath_rwqe) +
- srq->rq.max_sge * sizeof(struct ib_sge);
- size = attr->max_wr + 1;
- wq = vmalloc_user(sizeof(struct ipath_rwq) + size * sz);
- if (!wq) {
- ret = -ENOMEM;
- goto bail;
- }
-
- /* Check that we can write the offset to mmap. */
- if (udata && udata->inlen >= sizeof(__u64)) {
- __u64 offset_addr;
- __u64 offset = 0;
-
- ret = ib_copy_from_udata(&offset_addr, udata,
- sizeof(offset_addr));
- if (ret)
- goto bail_free;
- udata->outbuf =
- (void __user *) (unsigned long) offset_addr;
- ret = ib_copy_to_udata(udata, &offset,
- sizeof(offset));
- if (ret)
- goto bail_free;
- }
-
- spin_lock_irq(&srq->rq.lock);
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- owq = srq->rq.wq;
- head = owq->head;
- if (head >= srq->rq.size)
- head = 0;
- tail = owq->tail;
- if (tail >= srq->rq.size)
- tail = 0;
- n = head;
- if (n < tail)
- n += srq->rq.size - tail;
- else
- n -= tail;
- if (size <= n) {
- ret = -EINVAL;
- goto bail_unlock;
- }
- n = 0;
- p = wq->wq;
- while (tail != head) {
- struct ipath_rwqe *wqe;
- int i;
-
- wqe = get_rwqe_ptr(&srq->rq, tail);
- p->wr_id = wqe->wr_id;
- p->num_sge = wqe->num_sge;
- for (i = 0; i < wqe->num_sge; i++)
- p->sg_list[i] = wqe->sg_list[i];
- n++;
- p = (struct ipath_rwqe *)((char *) p + sz);
- if (++tail >= srq->rq.size)
- tail = 0;
- }
- srq->rq.wq = wq;
- srq->rq.size = size;
- wq->head = n;
- wq->tail = 0;
- if (attr_mask & IB_SRQ_LIMIT)
- srq->limit = attr->srq_limit;
- spin_unlock_irq(&srq->rq.lock);
-
- vfree(owq);
-
- if (srq->ip) {
- struct ipath_mmap_info *ip = srq->ip;
- struct ipath_ibdev *dev = to_idev(srq->ibsrq.device);
- u32 s = sizeof(struct ipath_rwq) + size * sz;
-
- ipath_update_mmap_info(dev, ip, s, wq);
-
- /*
- * Return the offset to mmap.
- * See ipath_mmap() for details.
- */
- if (udata && udata->inlen >= sizeof(__u64)) {
- ret = ib_copy_to_udata(udata, &ip->offset,
- sizeof(ip->offset));
- if (ret)
- goto bail;
- }
-
- spin_lock_irq(&dev->pending_lock);
- if (list_empty(&ip->pending_mmaps))
- list_add(&ip->pending_mmaps,
- &dev->pending_mmaps);
- spin_unlock_irq(&dev->pending_lock);
- }
- } else if (attr_mask & IB_SRQ_LIMIT) {
- spin_lock_irq(&srq->rq.lock);
- if (attr->srq_limit >= srq->rq.size)
- ret = -EINVAL;
- else
- srq->limit = attr->srq_limit;
- spin_unlock_irq(&srq->rq.lock);
- }
- goto bail;
-
-bail_unlock:
- spin_unlock_irq(&srq->rq.lock);
-bail_free:
- vfree(wq);
-bail:
- return ret;
-}
-
-int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
-
- attr->max_wr = srq->rq.size - 1;
- attr->max_sge = srq->rq.max_sge;
- attr->srq_limit = srq->limit;
- return 0;
-}
-
-/**
- * ipath_destroy_srq - destroy a shared receive queue
- * @ibsrq: the SRQ to destroy
- */
-int ipath_destroy_srq(struct ib_srq *ibsrq)
-{
- struct ipath_srq *srq = to_isrq(ibsrq);
- struct ipath_ibdev *dev = to_idev(ibsrq->device);
-
- spin_lock(&dev->n_srqs_lock);
- dev->n_srqs_allocated--;
- spin_unlock(&dev->n_srqs_lock);
- if (srq->ip)
- kref_put(&srq->ip->ref, ipath_release_mmap_info);
- else
- vfree(srq->rq.wq);
- kfree(srq);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "ipath_kernel.h"
-
-struct infinipath_stats ipath_stats;
-
-/**
- * ipath_snap_cntr - snapshot a chip counter
- * @dd: the infinipath device
- * @creg: the counter to snapshot
- *
- * called from add_timer and user counter read calls, to deal with
- * counters that wrap in "human time". The words sent and received, and
- * the packets sent and received are all that we worry about. For now,
- * at least, we don't worry about error counters, because if they wrap
- * that quickly, we probably don't care. We may eventually just make this
- * handle all the counters. word counters can wrap in about 20 seconds
- * of full bandwidth traffic, packet counters in a few hours.
- */
-
-u64 ipath_snap_cntr(struct ipath_devdata *dd, ipath_creg creg)
-{
- u32 val, reg64 = 0;
- u64 val64;
- unsigned long t0, t1;
- u64 ret;
-
- t0 = jiffies;
- /* If fast increment counters are only 32 bits, snapshot them,
- * and maintain them as 64bit values in the driver */
- if (!(dd->ipath_flags & IPATH_32BITCOUNTERS) &&
- (creg == dd->ipath_cregs->cr_wordsendcnt ||
- creg == dd->ipath_cregs->cr_wordrcvcnt ||
- creg == dd->ipath_cregs->cr_pktsendcnt ||
- creg == dd->ipath_cregs->cr_pktrcvcnt)) {
- val64 = ipath_read_creg(dd, creg);
- val = val64 == ~0ULL ? ~0U : 0;
- reg64 = 1;
- } else /* val64 just to keep gcc quiet... */
- val64 = val = ipath_read_creg32(dd, creg);
- /*
- * See if a second has passed. This is just a way to detect things
- * that are quite broken. Normally this should take just a few
- * cycles (the check is for long enough that we don't care if we get
- * pre-empted.) An Opteron HT O read timeout is 4 seconds with
- * normal NB values
- */
- t1 = jiffies;
- if (time_before(t0 + HZ, t1) && val == -1) {
- ipath_dev_err(dd, "Error! Read counter 0x%x timed out\n",
- creg);
- ret = 0ULL;
- goto bail;
- }
- if (reg64) {
- ret = val64;
- goto bail;
- }
-
- if (creg == dd->ipath_cregs->cr_wordsendcnt) {
- if (val != dd->ipath_lastsword) {
- dd->ipath_sword += val - dd->ipath_lastsword;
- dd->ipath_lastsword = val;
- }
- val64 = dd->ipath_sword;
- } else if (creg == dd->ipath_cregs->cr_wordrcvcnt) {
- if (val != dd->ipath_lastrword) {
- dd->ipath_rword += val - dd->ipath_lastrword;
- dd->ipath_lastrword = val;
- }
- val64 = dd->ipath_rword;
- } else if (creg == dd->ipath_cregs->cr_pktsendcnt) {
- if (val != dd->ipath_lastspkts) {
- dd->ipath_spkts += val - dd->ipath_lastspkts;
- dd->ipath_lastspkts = val;
- }
- val64 = dd->ipath_spkts;
- } else if (creg == dd->ipath_cregs->cr_pktrcvcnt) {
- if (val != dd->ipath_lastrpkts) {
- dd->ipath_rpkts += val - dd->ipath_lastrpkts;
- dd->ipath_lastrpkts = val;
- }
- val64 = dd->ipath_rpkts;
- } else if (creg == dd->ipath_cregs->cr_ibsymbolerrcnt) {
- if (dd->ibdeltainprog)
- val64 -= val64 - dd->ibsymsnap;
- val64 -= dd->ibsymdelta;
- } else if (creg == dd->ipath_cregs->cr_iblinkerrrecovcnt) {
- if (dd->ibdeltainprog)
- val64 -= val64 - dd->iblnkerrsnap;
- val64 -= dd->iblnkerrdelta;
- } else
- val64 = (u64) val;
-
- ret = val64;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_qcheck - print delta of egrfull/hdrqfull errors for kernel ports
- * @dd: the infinipath device
- *
- * print the delta of egrfull/hdrqfull errors for kernel ports no more than
- * every 5 seconds. User processes are printed at close, but kernel doesn't
- * close, so... Separate routine so may call from other places someday, and
- * so function name when printed by _IPATH_INFO is meaningfull
- */
-static void ipath_qcheck(struct ipath_devdata *dd)
-{
- static u64 last_tot_hdrqfull;
- struct ipath_portdata *pd = dd->ipath_pd[0];
- size_t blen = 0;
- char buf[128];
- u32 hdrqtail;
-
- *buf = 0;
- if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) {
- blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
- pd->port_hdrqfull -
- dd->ipath_p0_hdrqfull);
- dd->ipath_p0_hdrqfull = pd->port_hdrqfull;
- }
- if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
- blen += snprintf(buf + blen, sizeof buf - blen,
- "%srcvegrfull %llu",
- blen ? ", " : "",
- (unsigned long long)
- (ipath_stats.sps_etidfull -
- dd->ipath_last_tidfull));
- dd->ipath_last_tidfull = ipath_stats.sps_etidfull;
- }
-
- /*
- * this is actually the number of hdrq full interrupts, not actual
- * events, but at the moment that's mostly what I'm interested in.
- * Actual count, etc. is in the counters, if needed. For production
- * users this won't ordinarily be printed.
- */
-
- if ((ipath_debug & (__IPATH_PKTDBG | __IPATH_DBG)) &&
- ipath_stats.sps_hdrqfull != last_tot_hdrqfull) {
- blen += snprintf(buf + blen, sizeof buf - blen,
- "%shdrqfull %llu (all ports)",
- blen ? ", " : "",
- (unsigned long long)
- (ipath_stats.sps_hdrqfull -
- last_tot_hdrqfull));
- last_tot_hdrqfull = ipath_stats.sps_hdrqfull;
- }
- if (blen)
- ipath_dbg("%s\n", buf);
-
- hdrqtail = ipath_get_hdrqtail(pd);
- if (pd->port_head != hdrqtail) {
- if (dd->ipath_lastport0rcv_cnt ==
- ipath_stats.sps_port0pkts) {
- ipath_cdbg(PKT, "missing rcv interrupts? "
- "port0 hd=%x tl=%x; port0pkts %llx; write"
- " hd (w/intr)\n",
- pd->port_head, hdrqtail,
- (unsigned long long)
- ipath_stats.sps_port0pkts);
- ipath_write_ureg(dd, ur_rcvhdrhead, hdrqtail |
- dd->ipath_rhdrhead_intr_off, pd->port_port);
- }
- dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
- }
-}
-
-static void ipath_chk_errormask(struct ipath_devdata *dd)
-{
- static u32 fixed;
- u32 ctrl;
- unsigned long errormask;
- unsigned long hwerrs;
-
- if (!dd->ipath_errormask || !(dd->ipath_flags & IPATH_INITTED))
- return;
-
- errormask = ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
-
- if (errormask == dd->ipath_errormask)
- return;
- fixed++;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
-
- if ((hwerrs & dd->ipath_hwerrmask) ||
- (ctrl & INFINIPATH_C_FREEZEMODE)) {
- /* force re-interrupt of pending events, just in case */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, 0ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
- dev_info(&dd->pcidev->dev,
- "errormask fixed(%u) %lx -> %lx, ctrl %x hwerr %lx\n",
- fixed, errormask, (unsigned long)dd->ipath_errormask,
- ctrl, hwerrs);
- } else
- ipath_dbg("errormask fixed(%u) %lx -> %lx, no freeze\n",
- fixed, errormask,
- (unsigned long)dd->ipath_errormask);
-}
-
-
-/**
- * ipath_get_faststats - get word counters from chip before they overflow
- * @opaque - contains a pointer to the infinipath device ipath_devdata
- *
- * called from add_timer
- */
-void ipath_get_faststats(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
- int i;
- static unsigned cnt;
- unsigned long flags;
- u64 traffic_wds;
-
- /*
- * don't access the chip while running diags, or memory diags can
- * fail
- */
- if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_INITTED) ||
- ipath_diag_inuse)
- /* but re-arm the timer, for diags case; won't hurt other */
- goto done;
-
- /*
- * We now try to maintain a "active timer", based on traffic
- * exceeding a threshold, so we need to check the word-counts
- * even if they are 64-bit.
- */
- traffic_wds = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt) +
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
- spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
- traffic_wds -= dd->ipath_traffic_wds;
- dd->ipath_traffic_wds += traffic_wds;
- if (traffic_wds >= IPATH_TRAFFIC_ACTIVE_THRESHOLD)
- atomic_add(5, &dd->ipath_active_time); /* S/B #define */
- spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
-
- if (dd->ipath_flags & IPATH_32BITCOUNTERS) {
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
- ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
- }
-
- ipath_qcheck(dd);
-
- /*
- * deal with repeat error suppression. Doesn't really matter if
- * last error was almost a full interval ago, or just a few usecs
- * ago; still won't get more than 2 per interval. We may want
- * longer intervals for this eventually, could do with mod, counter
- * or separate timer. Also see code in ipath_handle_errors() and
- * ipath_handle_hwerrors().
- */
-
- if (dd->ipath_lasterror)
- dd->ipath_lasterror = 0;
- if (dd->ipath_lasthwerror)
- dd->ipath_lasthwerror = 0;
- if (dd->ipath_maskederrs
- && time_after(jiffies, dd->ipath_unmasktime)) {
- char ebuf[256];
- int iserr;
- iserr = ipath_decode_err(dd, ebuf, sizeof ebuf,
- dd->ipath_maskederrs);
- if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_PKTERRS))
- ipath_dev_err(dd, "Re-enabling masked errors "
- "(%s)\n", ebuf);
- else {
- /*
- * rcvegrfull and rcvhdrqfull are "normal", for some
- * types of processes (mostly benchmarks) that send
- * huge numbers of messages, while not processing
- * them. So only complain about these at debug
- * level.
- */
- if (iserr)
- ipath_dbg(
- "Re-enabling queue full errors (%s)\n",
- ebuf);
- else
- ipath_cdbg(ERRPKT, "Re-enabling packet"
- " problem interrupt (%s)\n", ebuf);
- }
-
- /* re-enable masked errors */
- dd->ipath_errormask |= dd->ipath_maskederrs;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- dd->ipath_maskederrs = 0;
- }
-
- /* limit qfull messages to ~one per minute per port */
- if ((++cnt & 0x10)) {
- for (i = (int) dd->ipath_cfgports; --i >= 0; ) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
-
- if (pd && pd->port_lastrcvhdrqtail != -1)
- pd->port_lastrcvhdrqtail = -1;
- }
- }
-
- ipath_chk_errormask(dd);
-done:
- mod_timer(&dd->ipath_stats_timer, jiffies + HZ * 5);
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/ctype.h>
-#include <linux/stat.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-/**
- * ipath_parse_ushort - parse an unsigned short value in an arbitrary base
- * @str: the string containing the number
- * @valp: where to put the result
- *
- * returns the number of bytes consumed, or negative value on error
- */
-int ipath_parse_ushort(const char *str, unsigned short *valp)
-{
- unsigned long val;
- char *end;
- int ret;
-
- if (!isdigit(str[0])) {
- ret = -EINVAL;
- goto bail;
- }
-
- val = simple_strtoul(str, &end, 0);
-
- if (val > 0xffff) {
- ret = -EINVAL;
- goto bail;
- }
-
- *valp = val;
-
- ret = end + 1 - str;
- if (ret == 0)
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-static ssize_t show_version(struct device_driver *dev, char *buf)
-{
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", ib_ipath_version);
-}
-
-static ssize_t show_num_units(struct device_driver *dev, char *buf)
-{
- return scnprintf(buf, PAGE_SIZE, "%d\n",
- ipath_count_units(NULL, NULL, NULL));
-}
-
-static ssize_t show_status(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
-
- if (!dd->ipath_statusp) {
- ret = -EINVAL;
- goto bail;
- }
-
- ret = scnprintf(buf, PAGE_SIZE, "0x%llx\n",
- (unsigned long long) *(dd->ipath_statusp));
-
-bail:
- return ret;
-}
-
-static const char *ipath_status_str[] = {
- "Initted",
- "Disabled",
- "Admin_Disabled",
- "", /* This used to be the old "OIB_SMA" status. */
- "", /* This used to be the old "SMA" status. */
- "Present",
- "IB_link_up",
- "IB_configured",
- "NoIBcable",
- "Fatal_Hardware_Error",
- NULL,
-};
-
-static ssize_t show_status_str(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int i, any;
- u64 s;
- ssize_t ret;
-
- if (!dd->ipath_statusp) {
- ret = -EINVAL;
- goto bail;
- }
-
- s = *(dd->ipath_statusp);
- *buf = '\0';
- for (any = i = 0; s && ipath_status_str[i]; i++) {
- if (s & 1) {
- if (any && strlcat(buf, " ", PAGE_SIZE) >=
- PAGE_SIZE)
- /* overflow */
- break;
- if (strlcat(buf, ipath_status_str[i],
- PAGE_SIZE) >= PAGE_SIZE)
- break;
- any = 1;
- }
- s >>= 1;
- }
- if (any)
- strlcat(buf, "\n", PAGE_SIZE);
-
- ret = strlen(buf);
-
-bail:
- return ret;
-}
-
-static ssize_t show_boardversion(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_boardversion);
-}
-
-static ssize_t show_localbus_info(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- /* The string printed here is already newline-terminated. */
- return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_lbus_info);
-}
-
-static ssize_t show_lmc(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_lmc);
-}
-
-static ssize_t store_lmc(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 lmc = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &lmc);
- if (ret < 0)
- goto invalid;
-
- if (lmc > 7) {
- ret = -EINVAL;
- goto invalid;
- }
-
- ipath_set_lid(dd, dd->ipath_lid, lmc);
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid LMC %u\n", lmc);
-bail:
- return ret;
-}
-
-static ssize_t show_lid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_lid);
-}
-
-static ssize_t store_lid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 lid = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &lid);
- if (ret < 0)
- goto invalid;
-
- if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE) {
- ret = -EINVAL;
- goto invalid;
- }
-
- ipath_set_lid(dd, lid, dd->ipath_lmc);
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid LID 0x%x\n", lid);
-bail:
- return ret;
-}
-
-static ssize_t show_mlid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_mlid);
-}
-
-static ssize_t store_mlid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 mlid;
- int ret;
-
- ret = ipath_parse_ushort(buf, &mlid);
- if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
- goto invalid;
-
- dd->ipath_mlid = mlid;
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid MLID\n");
-bail:
- return ret;
-}
-
-static ssize_t show_guid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u8 *guid;
-
- guid = (u8 *) & (dd->ipath_guid);
-
- return scnprintf(buf, PAGE_SIZE,
- "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
- guid[0], guid[1], guid[2], guid[3],
- guid[4], guid[5], guid[6], guid[7]);
-}
-
-static ssize_t store_guid(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- unsigned short guid[8];
- __be64 new_guid;
- u8 *ng;
- int i;
-
- if (sscanf(buf, "%hx:%hx:%hx:%hx:%hx:%hx:%hx:%hx",
- &guid[0], &guid[1], &guid[2], &guid[3],
- &guid[4], &guid[5], &guid[6], &guid[7]) != 8)
- goto invalid;
-
- ng = (u8 *) &new_guid;
-
- for (i = 0; i < 8; i++) {
- if (guid[i] > 0xff)
- goto invalid;
- ng[i] = guid[i];
- }
-
- if (new_guid == 0)
- goto invalid;
-
- dd->ipath_guid = new_guid;
- dd->ipath_nguid = 1;
- if (dd->verbs_dev)
- dd->verbs_dev->ibdev.node_guid = new_guid;
-
- ret = strlen(buf);
- goto bail;
-
-invalid:
- ipath_dev_err(dd, "attempt to set invalid GUID\n");
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
-static ssize_t show_nguid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_nguid);
-}
-
-static ssize_t show_nports(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- /* Return the number of user ports available. */
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_cfgports - 1);
-}
-
-static ssize_t show_serial(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- buf[sizeof dd->ipath_serial] = '\0';
- memcpy(buf, dd->ipath_serial, sizeof dd->ipath_serial);
- strcat(buf, "\n");
- return strlen(buf);
-}
-
-static ssize_t show_unit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_unit);
-}
-
-static ssize_t show_jint_max_packets(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_max_packets);
-}
-
-static ssize_t store_jint_max_packets(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 v = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &v);
- if (ret < 0)
- ipath_dev_err(dd, "invalid jint_max_packets.\n");
- else
- dd->ipath_f_config_jint(dd, dd->ipath_jint_idle_ticks, v);
-
- return ret;
-}
-
-static ssize_t show_jint_idle_ticks(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
-
- return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_idle_ticks);
-}
-
-static ssize_t store_jint_idle_ticks(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- u16 v = 0;
- int ret;
-
- ret = ipath_parse_ushort(buf, &v);
- if (ret < 0)
- ipath_dev_err(dd, "invalid jint_idle_ticks.\n");
- else
- dd->ipath_f_config_jint(dd, v, dd->ipath_jint_max_packets);
-
- return ret;
-}
-
-#define DEVICE_COUNTER(name, attr) \
- static ssize_t show_counter_##name(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
- { \
- struct ipath_devdata *dd = dev_get_drvdata(dev); \
- return scnprintf(\
- buf, PAGE_SIZE, "%llu\n", (unsigned long long) \
- ipath_snap_cntr( \
- dd, offsetof(struct infinipath_counters, \
- attr) / sizeof(u64))); \
- } \
- static DEVICE_ATTR(name, S_IRUGO, show_counter_##name, NULL);
-
-DEVICE_COUNTER(ib_link_downeds, IBLinkDownedCnt);
-DEVICE_COUNTER(ib_link_err_recoveries, IBLinkErrRecoveryCnt);
-DEVICE_COUNTER(ib_status_changes, IBStatusChangeCnt);
-DEVICE_COUNTER(ib_symbol_errs, IBSymbolErrCnt);
-DEVICE_COUNTER(lb_flow_stalls, LBFlowStallCnt);
-DEVICE_COUNTER(lb_ints, LBIntCnt);
-DEVICE_COUNTER(rx_bad_formats, RxBadFormatCnt);
-DEVICE_COUNTER(rx_buf_ovfls, RxBufOvflCnt);
-DEVICE_COUNTER(rx_data_pkts, RxDataPktCnt);
-DEVICE_COUNTER(rx_dropped_pkts, RxDroppedPktCnt);
-DEVICE_COUNTER(rx_dwords, RxDwordCnt);
-DEVICE_COUNTER(rx_ebps, RxEBPCnt);
-DEVICE_COUNTER(rx_flow_ctrl_errs, RxFlowCtrlErrCnt);
-DEVICE_COUNTER(rx_flow_pkts, RxFlowPktCnt);
-DEVICE_COUNTER(rx_icrc_errs, RxICRCErrCnt);
-DEVICE_COUNTER(rx_len_errs, RxLenErrCnt);
-DEVICE_COUNTER(rx_link_problems, RxLinkProblemCnt);
-DEVICE_COUNTER(rx_lpcrc_errs, RxLPCRCErrCnt);
-DEVICE_COUNTER(rx_max_min_len_errs, RxMaxMinLenErrCnt);
-DEVICE_COUNTER(rx_p0_hdr_egr_ovfls, RxP0HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p1_hdr_egr_ovfls, RxP1HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p2_hdr_egr_ovfls, RxP2HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p3_hdr_egr_ovfls, RxP3HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p4_hdr_egr_ovfls, RxP4HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p5_hdr_egr_ovfls, RxP5HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p6_hdr_egr_ovfls, RxP6HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p7_hdr_egr_ovfls, RxP7HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_p8_hdr_egr_ovfls, RxP8HdrEgrOvflCnt);
-DEVICE_COUNTER(rx_pkey_mismatches, RxPKeyMismatchCnt);
-DEVICE_COUNTER(rx_tid_full_errs, RxTIDFullErrCnt);
-DEVICE_COUNTER(rx_tid_valid_errs, RxTIDValidErrCnt);
-DEVICE_COUNTER(rx_vcrc_errs, RxVCRCErrCnt);
-DEVICE_COUNTER(tx_data_pkts, TxDataPktCnt);
-DEVICE_COUNTER(tx_dropped_pkts, TxDroppedPktCnt);
-DEVICE_COUNTER(tx_dwords, TxDwordCnt);
-DEVICE_COUNTER(tx_flow_pkts, TxFlowPktCnt);
-DEVICE_COUNTER(tx_flow_stalls, TxFlowStallCnt);
-DEVICE_COUNTER(tx_len_errs, TxLenErrCnt);
-DEVICE_COUNTER(tx_max_min_len_errs, TxMaxMinLenErrCnt);
-DEVICE_COUNTER(tx_underruns, TxUnderrunCnt);
-DEVICE_COUNTER(tx_unsup_vl_errs, TxUnsupVLErrCnt);
-
-static struct attribute *dev_counter_attributes[] = {
- &dev_attr_ib_link_downeds.attr,
- &dev_attr_ib_link_err_recoveries.attr,
- &dev_attr_ib_status_changes.attr,
- &dev_attr_ib_symbol_errs.attr,
- &dev_attr_lb_flow_stalls.attr,
- &dev_attr_lb_ints.attr,
- &dev_attr_rx_bad_formats.attr,
- &dev_attr_rx_buf_ovfls.attr,
- &dev_attr_rx_data_pkts.attr,
- &dev_attr_rx_dropped_pkts.attr,
- &dev_attr_rx_dwords.attr,
- &dev_attr_rx_ebps.attr,
- &dev_attr_rx_flow_ctrl_errs.attr,
- &dev_attr_rx_flow_pkts.attr,
- &dev_attr_rx_icrc_errs.attr,
- &dev_attr_rx_len_errs.attr,
- &dev_attr_rx_link_problems.attr,
- &dev_attr_rx_lpcrc_errs.attr,
- &dev_attr_rx_max_min_len_errs.attr,
- &dev_attr_rx_p0_hdr_egr_ovfls.attr,
- &dev_attr_rx_p1_hdr_egr_ovfls.attr,
- &dev_attr_rx_p2_hdr_egr_ovfls.attr,
- &dev_attr_rx_p3_hdr_egr_ovfls.attr,
- &dev_attr_rx_p4_hdr_egr_ovfls.attr,
- &dev_attr_rx_p5_hdr_egr_ovfls.attr,
- &dev_attr_rx_p6_hdr_egr_ovfls.attr,
- &dev_attr_rx_p7_hdr_egr_ovfls.attr,
- &dev_attr_rx_p8_hdr_egr_ovfls.attr,
- &dev_attr_rx_pkey_mismatches.attr,
- &dev_attr_rx_tid_full_errs.attr,
- &dev_attr_rx_tid_valid_errs.attr,
- &dev_attr_rx_vcrc_errs.attr,
- &dev_attr_tx_data_pkts.attr,
- &dev_attr_tx_dropped_pkts.attr,
- &dev_attr_tx_dwords.attr,
- &dev_attr_tx_flow_pkts.attr,
- &dev_attr_tx_flow_stalls.attr,
- &dev_attr_tx_len_errs.attr,
- &dev_attr_tx_max_min_len_errs.attr,
- &dev_attr_tx_underruns.attr,
- &dev_attr_tx_unsup_vl_errs.attr,
- NULL
-};
-
-static struct attribute_group dev_counter_attr_group = {
- .name = "counters",
- .attrs = dev_counter_attributes
-};
-
-static ssize_t store_reset(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- if (count < 5 || memcmp(buf, "reset", 5)) {
- ret = -EINVAL;
- goto bail;
- }
-
- if (dd->ipath_flags & IPATH_DISABLED) {
- /*
- * post-reset init would re-enable interrupts, etc.
- * so don't allow reset on disabled devices. Not
- * perfect error, but about the best choice.
- */
- dev_info(dev,"Unit %d is disabled, can't reset\n",
- dd->ipath_unit);
- ret = -EINVAL;
- goto bail;
- }
- ret = ipath_reset_device(dd->ipath_unit);
-bail:
- return ret<0 ? ret : count;
-}
-
-static ssize_t store_link_state(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 state;
-
- ret = ipath_parse_ushort(buf, &state);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_linkstate(dd, state);
- if (r < 0) {
- ret = r;
- goto bail;
- }
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid link state\n");
-bail:
- return ret;
-}
-
-static ssize_t show_mtu(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_ibmtu);
-}
-
-static ssize_t store_mtu(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- u16 mtu = 0;
- int r;
-
- ret = ipath_parse_ushort(buf, &mtu);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_mtu(dd, mtu);
- if (r < 0)
- ret = r;
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid MTU\n");
-bail:
- return ret;
-}
-
-static ssize_t show_enabled(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- return scnprintf(buf, PAGE_SIZE, "%u\n",
- (dd->ipath_flags & IPATH_DISABLED) ? 0 : 1);
-}
-
-static ssize_t store_enabled(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- ssize_t ret;
- u16 enable = 0;
-
- ret = ipath_parse_ushort(buf, &enable);
- if (ret < 0) {
- ipath_dev_err(dd, "attempt to use non-numeric on enable\n");
- goto bail;
- }
-
- if (enable) {
- if (!(dd->ipath_flags & IPATH_DISABLED))
- goto bail;
-
- dev_info(dev, "Enabling unit %d\n", dd->ipath_unit);
- /* same as post-reset */
- ret = ipath_init_chip(dd, 1);
- if (ret)
- ipath_dev_err(dd, "Failed to enable unit %d\n",
- dd->ipath_unit);
- else {
- dd->ipath_flags &= ~IPATH_DISABLED;
- *dd->ipath_statusp &= ~IPATH_STATUS_ADMIN_DISABLED;
- }
- }
- else if (!(dd->ipath_flags & IPATH_DISABLED)) {
- dev_info(dev, "Disabling unit %d\n", dd->ipath_unit);
- ipath_shutdown_device(dd);
- dd->ipath_flags |= IPATH_DISABLED;
- *dd->ipath_statusp |= IPATH_STATUS_ADMIN_DISABLED;
- }
-
-bail:
- return ret;
-}
-
-static ssize_t store_rx_pol_inv(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret < 0)
- goto invalid;
-
- r = ipath_set_rx_pol_inv(dd, val);
- if (r < 0) {
- ret = r;
- goto bail;
- }
-
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid Rx Polarity invert\n");
-bail:
- return ret;
-}
-
-static ssize_t store_led_override(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret > 0)
- ipath_set_led_override(dd, val);
- else
- ipath_dev_err(dd, "attempt to set invalid LED override\n");
- return ret;
-}
-
-static ssize_t show_logged_errs(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int idx, count;
-
- /* force consistency with actual EEPROM */
- if (ipath_update_eeprom_log(dd) != 0)
- return -ENXIO;
-
- count = 0;
- for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
- count += scnprintf(buf + count, PAGE_SIZE - count, "%d%c",
- dd->ipath_eep_st_errs[idx],
- idx == (IPATH_EEP_LOG_CNT - 1) ? '\n' : ' ');
- }
-
- return count;
-}
-
-/*
- * New sysfs entries to control various IB config. These all turn into
- * accesses via ipath_f_get/set_ib_cfg.
- *
- * Get/Set heartbeat enable. Or of 1=enabled, 2=auto
- */
-static ssize_t show_hrtbt_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_HRTBT);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_hrtbt_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 3)
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd, "attempt to set invalid Heartbeat enable\n");
- goto bail;
- }
-
- /*
- * Set the "intentional" heartbeat enable per either of
- * "Enable" and "Auto", as these are normally set together.
- * This bit is consulted when leaving loopback mode,
- * because entering loopback mode overrides it and automatically
- * disables heartbeat.
- */
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, val);
- if (r < 0)
- ret = r;
- else if (val == IPATH_IB_HRTBT_OFF)
- dd->ipath_flags |= IPATH_NO_HRTBT;
- else
- dd->ipath_flags &= ~IPATH_NO_HRTBT;
-
-bail:
- return ret;
-}
-
-/*
- * Get/Set Link-widths enabled. Or of 1=1x, 2=4x (this is human/IB centric,
- * _not_ the particular encoding of any given chip)
- */
-static ssize_t show_lwid_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_lwid_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && (val == 0 || val > 3))
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd,
- "attempt to set invalid Link Width (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/* Get current link width */
-static ssize_t show_lwid(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-/*
- * Get/Set Link-speeds enabled. Or of 1=SDR 2=DDR.
- */
-static ssize_t show_spd_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_spd_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && (val == 0 || val > (IPATH_IB_SDR | IPATH_IB_DDR)))
- ret = -EINVAL;
- if (ret < 0) {
- ipath_dev_err(dd,
- "attempt to set invalid Link Speed (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/* Get current link speed */
-static ssize_t show_spd(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-/*
- * Get/Set RX polarity-invert enable. 0=no, 1=yes.
- */
-static ssize_t show_rx_polinv_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_rx_polinv_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 1) {
- ipath_dev_err(dd,
- "attempt to set invalid Rx Polarity (enable)\n");
- ret = -EINVAL;
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-/*
- * Get/Set RX lane-reversal enable. 0=no, 1=yes.
- */
-static ssize_t show_lanerev_enb(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
-
- ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB);
- if (ret >= 0)
- ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
- return ret;
-}
-
-static ssize_t store_lanerev_enb(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, r;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret >= 0 && val > 1) {
- ret = -EINVAL;
- ipath_dev_err(dd,
- "attempt to set invalid Lane reversal (enable)\n");
- goto bail;
- }
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB, val);
- if (r < 0)
- ret = r;
-
-bail:
- return ret;
-}
-
-static DRIVER_ATTR(num_units, S_IRUGO, show_num_units, NULL);
-static DRIVER_ATTR(version, S_IRUGO, show_version, NULL);
-
-static struct attribute *driver_attributes[] = {
- &driver_attr_num_units.attr,
- &driver_attr_version.attr,
- NULL
-};
-
-static struct attribute_group driver_attr_group = {
- .attrs = driver_attributes
-};
-
-static ssize_t store_tempsense(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret, stat;
- u16 val;
-
- ret = ipath_parse_ushort(buf, &val);
- if (ret <= 0) {
- ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
- goto bail;
- }
- /* If anything but the highest limit, enable T_CRIT_A "interrupt" */
- stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
- if (stat) {
- ipath_dev_err(dd, "Unable to set tempsense config\n");
- ret = -1;
- goto bail;
- }
- stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
- if (stat) {
- ipath_dev_err(dd, "Unable to set local Tcrit\n");
- ret = -1;
- goto bail;
- }
- stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
- if (stat) {
- ipath_dev_err(dd, "Unable to set remote Tcrit\n");
- ret = -1;
- goto bail;
- }
-
-bail:
- return ret;
-}
-
-/*
- * dump tempsense regs. in decimal, to ease shell-scripts.
- */
-static ssize_t show_tempsense(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ipath_devdata *dd = dev_get_drvdata(dev);
- int ret;
- int idx;
- u8 regvals[8];
-
- ret = -ENXIO;
- for (idx = 0; idx < 8; ++idx) {
- if (idx == 6)
- continue;
- ret = ipath_tempsense_read(dd, idx);
- if (ret < 0)
- break;
- regvals[idx] = ret;
- }
- if (idx == 8)
- ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
- *(signed char *)(regvals),
- *(signed char *)(regvals + 1),
- regvals[2], regvals[3],
- *(signed char *)(regvals + 5),
- *(signed char *)(regvals + 7));
- return ret;
-}
-
-const struct attribute_group *ipath_driver_attr_groups[] = {
- &driver_attr_group,
- NULL,
-};
-
-static DEVICE_ATTR(guid, S_IWUSR | S_IRUGO, show_guid, store_guid);
-static DEVICE_ATTR(lmc, S_IWUSR | S_IRUGO, show_lmc, store_lmc);
-static DEVICE_ATTR(lid, S_IWUSR | S_IRUGO, show_lid, store_lid);
-static DEVICE_ATTR(link_state, S_IWUSR, NULL, store_link_state);
-static DEVICE_ATTR(mlid, S_IWUSR | S_IRUGO, show_mlid, store_mlid);
-static DEVICE_ATTR(mtu, S_IWUSR | S_IRUGO, show_mtu, store_mtu);
-static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO, show_enabled, store_enabled);
-static DEVICE_ATTR(nguid, S_IRUGO, show_nguid, NULL);
-static DEVICE_ATTR(nports, S_IRUGO, show_nports, NULL);
-static DEVICE_ATTR(reset, S_IWUSR, NULL, store_reset);
-static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-static DEVICE_ATTR(status_str, S_IRUGO, show_status_str, NULL);
-static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL);
-static DEVICE_ATTR(unit, S_IRUGO, show_unit, NULL);
-static DEVICE_ATTR(rx_pol_inv, S_IWUSR, NULL, store_rx_pol_inv);
-static DEVICE_ATTR(led_override, S_IWUSR, NULL, store_led_override);
-static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
-static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
-static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
- show_jint_max_packets, store_jint_max_packets);
-static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
- show_jint_idle_ticks, store_jint_idle_ticks);
-static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
- show_tempsense, store_tempsense);
-
-static struct attribute *dev_attributes[] = {
- &dev_attr_guid.attr,
- &dev_attr_lmc.attr,
- &dev_attr_lid.attr,
- &dev_attr_link_state.attr,
- &dev_attr_mlid.attr,
- &dev_attr_mtu.attr,
- &dev_attr_nguid.attr,
- &dev_attr_nports.attr,
- &dev_attr_serial.attr,
- &dev_attr_status.attr,
- &dev_attr_status_str.attr,
- &dev_attr_boardversion.attr,
- &dev_attr_unit.attr,
- &dev_attr_enabled.attr,
- &dev_attr_rx_pol_inv.attr,
- &dev_attr_led_override.attr,
- &dev_attr_logged_errors.attr,
- &dev_attr_tempsense.attr,
- &dev_attr_localbus_info.attr,
- NULL
-};
-
-static struct attribute_group dev_attr_group = {
- .attrs = dev_attributes
-};
-
-static DEVICE_ATTR(hrtbt_enable, S_IWUSR | S_IRUGO, show_hrtbt_enb,
- store_hrtbt_enb);
-static DEVICE_ATTR(link_width_enable, S_IWUSR | S_IRUGO, show_lwid_enb,
- store_lwid_enb);
-static DEVICE_ATTR(link_width, S_IRUGO, show_lwid, NULL);
-static DEVICE_ATTR(link_speed_enable, S_IWUSR | S_IRUGO, show_spd_enb,
- store_spd_enb);
-static DEVICE_ATTR(link_speed, S_IRUGO, show_spd, NULL);
-static DEVICE_ATTR(rx_pol_inv_enable, S_IWUSR | S_IRUGO, show_rx_polinv_enb,
- store_rx_polinv_enb);
-static DEVICE_ATTR(rx_lane_rev_enable, S_IWUSR | S_IRUGO, show_lanerev_enb,
- store_lanerev_enb);
-
-static struct attribute *dev_ibcfg_attributes[] = {
- &dev_attr_hrtbt_enable.attr,
- &dev_attr_link_width_enable.attr,
- &dev_attr_link_width.attr,
- &dev_attr_link_speed_enable.attr,
- &dev_attr_link_speed.attr,
- &dev_attr_rx_pol_inv_enable.attr,
- &dev_attr_rx_lane_rev_enable.attr,
- NULL
-};
-
-static struct attribute_group dev_ibcfg_attr_group = {
- .attrs = dev_ibcfg_attributes
-};
-
-/**
- * ipath_expose_reset - create a device reset file
- * @dev: the device structure
- *
- * Only expose a file that lets us reset the device after someone
- * enters diag mode. A device reset is quite likely to crash the
- * machine entirely, so we don't want to normally make it
- * available.
- *
- * Called with ipath_mutex held.
- */
-int ipath_expose_reset(struct device *dev)
-{
- static int exposed;
- int ret;
-
- if (!exposed) {
- ret = device_create_file(dev, &dev_attr_reset);
- exposed = 1;
- }
- else
- ret = 0;
-
- return ret;
-}
-
-int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd)
-{
- int ret;
-
- ret = sysfs_create_group(&dev->kobj, &dev_attr_group);
- if (ret)
- goto bail;
-
- ret = sysfs_create_group(&dev->kobj, &dev_counter_attr_group);
- if (ret)
- goto bail_attrs;
-
- if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
- ret = device_create_file(dev, &dev_attr_jint_idle_ticks);
- if (ret)
- goto bail_counter;
- ret = device_create_file(dev, &dev_attr_jint_max_packets);
- if (ret)
- goto bail_idle;
-
- ret = sysfs_create_group(&dev->kobj, &dev_ibcfg_attr_group);
- if (ret)
- goto bail_max;
- }
-
- return 0;
-
-bail_max:
- device_remove_file(dev, &dev_attr_jint_max_packets);
-bail_idle:
- device_remove_file(dev, &dev_attr_jint_idle_ticks);
-bail_counter:
- sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
-bail_attrs:
- sysfs_remove_group(&dev->kobj, &dev_attr_group);
-bail:
- return ret;
-}
-
-void ipath_device_remove_group(struct device *dev, struct ipath_devdata *dd)
-{
- sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
-
- if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
- sysfs_remove_group(&dev->kobj, &dev_ibcfg_attr_group);
- device_remove_file(dev, &dev_attr_jint_idle_ticks);
- device_remove_file(dev, &dev_attr_jint_max_packets);
- }
-
- sysfs_remove_group(&dev->kobj, &dev_attr_group);
-
- device_remove_file(dev, &dev_attr_reset);
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/* cut down ridiculously long IB macro names */
-#define OP(x) IB_OPCODE_UC_##x
-
-/**
- * ipath_make_uc_req - construct a request packet (SEND, RDMA write)
- * @qp: a pointer to the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_uc_req(struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- struct ipath_swqe *wqe;
- unsigned long flags;
- u32 hwords;
- u32 bth0;
- u32 len;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- int ret = 0;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- ohdr = &qp->s_hdr.u.oth;
- if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
- ohdr = &qp->s_hdr.u.l.oth;
-
- /* header size in 32-bit words LRH+BTH = (8+12)/4. */
- hwords = 5;
- bth0 = 1 << 22; /* Set M bit */
-
- /* Get the next send request. */
- wqe = get_swqe_ptr(qp, qp->s_cur);
- qp->s_wqe = NULL;
- switch (qp->s_state) {
- default:
- if (!(ib_ipath_state_ops[qp->state] &
- IPATH_PROCESS_NEXT_SEND_OK))
- goto bail;
- /* Check if send work queue is empty. */
- if (qp->s_cur == qp->s_head)
- goto bail;
- /*
- * Start a new request.
- */
- qp->s_psn = wqe->psn = qp->s_next_psn;
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->wr.num_sge;
- qp->s_len = len = wqe->length;
- switch (wqe->wr.opcode) {
- case IB_WR_SEND:
- case IB_WR_SEND_WITH_IMM:
- if (len > pmtu) {
- qp->s_state = OP(SEND_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_ONLY);
- else {
- qp->s_state =
- OP(SEND_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case IB_WR_RDMA_WRITE:
- case IB_WR_RDMA_WRITE_WITH_IMM:
- ohdr->u.rc.reth.vaddr =
- cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
- ohdr->u.rc.reth.rkey =
- cpu_to_be32(wqe->wr.wr.rdma.rkey);
- ohdr->u.rc.reth.length = cpu_to_be32(len);
- hwords += sizeof(struct ib_reth) / 4;
- if (len > pmtu) {
- qp->s_state = OP(RDMA_WRITE_FIRST);
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_ONLY);
- else {
- qp->s_state =
- OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
- /* Immediate data comes after the RETH */
- ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- default:
- goto bail;
- }
- break;
-
- case OP(SEND_FIRST):
- qp->s_state = OP(SEND_MIDDLE);
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_SEND)
- qp->s_state = OP(SEND_LAST);
- else {
- qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- }
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
-
- case OP(RDMA_WRITE_FIRST):
- qp->s_state = OP(RDMA_WRITE_MIDDLE);
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- len = qp->s_len;
- if (len > pmtu) {
- len = pmtu;
- break;
- }
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
- qp->s_state = OP(RDMA_WRITE_LAST);
- else {
- qp->s_state =
- OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
- /* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.ex.imm_data;
- hwords += 1;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- }
- qp->s_wqe = wqe;
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
- break;
- }
- qp->s_len -= len;
- qp->s_hdrwords = hwords;
- qp->s_cur_sge = &qp->s_sge;
- qp->s_cur_size = len;
- ipath_make_ruc_header(to_idev(qp->ibqp.device),
- qp, ohdr, bth0 | (qp->s_state << 24),
- qp->s_next_psn++ & IPATH_PSN_MASK);
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_uc_rcv - handle an incoming UC packet
- * @dev: the device the packet came in on
- * @hdr: the header of the packet
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the length of the packet
- * @qp: the QP for this packet.
- *
- * This is called from ipath_qp_rcv() to process an incoming UC packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- int opcode;
- u32 hdrsize;
- u32 psn;
- u32 pad;
- struct ib_wc wc;
- u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
- struct ib_reth *reth;
- int header_in_data;
-
- /* Validate the SLID. See Ch. 9.6.1.5 */
- if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
- goto done;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12; /* LRH + BTH */
- psn = be32_to_cpu(ohdr->bth[2]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
- /*
- * The header with GRH is 60 bytes and the
- * core driver sets the eager header buffer
- * size to 56 bytes so the last 4 bytes of
- * the BTH header (PSN) is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- psn = be32_to_cpu(((__be32 *) data)[0]);
- data += sizeof(__be32);
- } else
- psn = be32_to_cpu(ohdr->bth[2]);
- }
- /*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
-
- memset(&wc, 0, sizeof wc);
-
- /* Compare the PSN verses the expected PSN. */
- if (unlikely(ipath_cmp24(psn, qp->r_psn) != 0)) {
- /*
- * Handle a sequence error.
- * Silently drop any current message.
- */
- qp->r_psn = psn;
- inv:
- qp->r_state = OP(SEND_LAST);
- switch (opcode) {
- case OP(SEND_FIRST):
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- goto send_first;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
- goto rdma_first;
-
- default:
- dev->n_pkt_drops++;
- goto done;
- }
- }
-
- /* Check for opcode sequence errors. */
- switch (qp->r_state) {
- case OP(SEND_FIRST):
- case OP(SEND_MIDDLE):
- if (opcode == OP(SEND_MIDDLE) ||
- opcode == OP(SEND_LAST) ||
- opcode == OP(SEND_LAST_WITH_IMMEDIATE))
- break;
- goto inv;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_MIDDLE):
- if (opcode == OP(RDMA_WRITE_MIDDLE) ||
- opcode == OP(RDMA_WRITE_LAST) ||
- opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
- break;
- goto inv;
-
- default:
- if (opcode == OP(SEND_FIRST) ||
- opcode == OP(SEND_ONLY) ||
- opcode == OP(SEND_ONLY_WITH_IMMEDIATE) ||
- opcode == OP(RDMA_WRITE_FIRST) ||
- opcode == OP(RDMA_WRITE_ONLY) ||
- opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- break;
- goto inv;
- }
-
- /* OK, process the packet. */
- switch (opcode) {
- case OP(SEND_FIRST):
- case OP(SEND_ONLY):
- case OP(SEND_ONLY_WITH_IMMEDIATE):
- send_first:
- if (qp->r_flags & IPATH_R_REUSE_SGE) {
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- qp->r_sge = qp->s_rdma_read_sge;
- } else if (!ipath_get_rwqe(qp, 0)) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Save the WQE so we can reuse it in case of an error. */
- qp->s_rdma_read_sge = qp->r_sge;
- qp->r_rcv_len = 0;
- if (opcode == OP(SEND_ONLY))
- goto send_last;
- else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE))
- goto send_last_imm;
- /* FALLTHROUGH */
- case OP(SEND_MIDDLE):
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4))) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len)) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(SEND_LAST_WITH_IMMEDIATE):
- send_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
- /* FALLTHROUGH */
- case OP(SEND_LAST):
- send_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- wc.byte_len = tlen + qp->r_rcv_len;
- if (unlikely(wc.byte_len > qp->r_len)) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto done;
- }
- wc.opcode = IB_WC_RECV;
- last_imm:
- ipath_copy_sge(&qp->r_sge, data, tlen);
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
- break;
-
- case OP(RDMA_WRITE_FIRST):
- case OP(RDMA_WRITE_ONLY):
- case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): /* consume RWQE */
- rdma_first:
- /* RETH comes after BTH */
- if (!header_in_data)
- reth = &ohdr->u.rc.reth;
- else {
- reth = (struct ib_reth *)data;
- data += sizeof(*reth);
- }
- hdrsize += sizeof(*reth);
- qp->r_len = be32_to_cpu(reth->length);
- qp->r_rcv_len = 0;
- if (qp->r_len != 0) {
- u32 rkey = be32_to_cpu(reth->rkey);
- u64 vaddr = be64_to_cpu(reth->vaddr);
- int ok;
-
- /* Check rkey */
- ok = ipath_rkey_ok(qp, &qp->r_sge, qp->r_len,
- vaddr, rkey,
- IB_ACCESS_REMOTE_WRITE);
- if (unlikely(!ok)) {
- dev->n_pkt_drops++;
- goto done;
- }
- } else {
- qp->r_sge.sg_list = NULL;
- qp->r_sge.sge.mr = NULL;
- qp->r_sge.sge.vaddr = NULL;
- qp->r_sge.sge.length = 0;
- qp->r_sge.sge.sge_length = 0;
- }
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE))) {
- dev->n_pkt_drops++;
- goto done;
- }
- if (opcode == OP(RDMA_WRITE_ONLY))
- goto rdma_last;
- else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
- goto rdma_last_imm;
- /* FALLTHROUGH */
- case OP(RDMA_WRITE_MIDDLE):
- /* Check for invalid length PMTU or posted rwqe len. */
- if (unlikely(tlen != (hdrsize + pmtu + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_rcv_len += pmtu;
- if (unlikely(qp->r_rcv_len > qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, pmtu);
- break;
-
- case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
- rdma_last_imm:
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else {
- /* Immediate data comes after BTH */
- wc.ex.imm_data = ohdr->u.imm_data;
- }
- hdrsize += 4;
- wc.wc_flags = IB_WC_WITH_IMM;
-
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- if (qp->r_flags & IPATH_R_REUSE_SGE)
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- else if (!ipath_get_rwqe(qp, 1)) {
- dev->n_pkt_drops++;
- goto done;
- }
- wc.byte_len = qp->r_len;
- wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
- goto last_imm;
-
- case OP(RDMA_WRITE_LAST):
- rdma_last:
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- /* Check for invalid length. */
- /* XXX LAST len should be >= 1 */
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- dev->n_pkt_drops++;
- goto done;
- }
- /* Don't count the CRC. */
- tlen -= (hdrsize + pad + 4);
- if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
- dev->n_pkt_drops++;
- goto done;
- }
- ipath_copy_sge(&qp->r_sge, data, tlen);
- break;
-
- default:
- /* Drop packet for unknown opcodes. */
- dev->n_pkt_drops++;
- goto done;
- }
- qp->r_psn++;
- qp->r_state = opcode;
-done:
- return;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/sched.h>
-#include <rdma/ib_smi.h>
-
-#include "ipath_verbs.h"
-#include "ipath_kernel.h"
-
-/**
- * ipath_ud_loopback - handle send on loopback QPs
- * @sqp: the sending QP
- * @swqe: the send work request
- *
- * This is called from ipath_make_ud_req() to forward a WQE addressed
- * to the same HCA.
- * Note that the receive interrupt handler may be calling ipath_ud_rcv()
- * while this is being called.
- */
-static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
-{
- struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
- struct ipath_qp *qp;
- struct ib_ah_attr *ah_attr;
- unsigned long flags;
- struct ipath_rq *rq;
- struct ipath_srq *srq;
- struct ipath_sge_state rsge;
- struct ipath_sge *sge;
- struct ipath_rwq *wq;
- struct ipath_rwqe *wqe;
- void (*handler)(struct ib_event *, void *);
- struct ib_wc wc;
- u32 tail;
- u32 rlen;
- u32 length;
-
- qp = ipath_lookup_qpn(&dev->qp_table, swqe->wr.wr.ud.remote_qpn);
- if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- goto done;
- }
-
- /*
- * Check that the qkey matches (except for QP0, see 9.6.1.4.1).
- * Qkeys with the high order bit set mean use the
- * qkey from the QP context instead of the WR (see 10.2.5).
- */
- if (unlikely(qp->ibqp.qp_num &&
- ((int) swqe->wr.wr.ud.remote_qkey < 0 ?
- sqp->qkey : swqe->wr.wr.ud.remote_qkey) != qp->qkey)) {
- /* XXX OK to lose a count once in a while. */
- dev->qkey_violations++;
- dev->n_pkt_drops++;
- goto drop;
- }
-
- /*
- * A GRH is expected to precede the data even if not
- * present on the wire.
- */
- length = swqe->length;
- memset(&wc, 0, sizeof wc);
- wc.byte_len = length + sizeof(struct ib_grh);
-
- if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
- wc.wc_flags = IB_WC_WITH_IMM;
- wc.ex.imm_data = swqe->wr.ex.imm_data;
- }
-
- /*
- * This would be a lot simpler if we could call ipath_get_rwqe()
- * but that uses state that the receive interrupt handler uses
- * so we would need to lock out receive interrupts while doing
- * local loopback.
- */
- if (qp->ibqp.srq) {
- srq = to_isrq(qp->ibqp.srq);
- handler = srq->ibsrq.event_handler;
- rq = &srq->rq;
- } else {
- srq = NULL;
- handler = NULL;
- rq = &qp->r_rq;
- }
-
- /*
- * Get the next work request entry to find where to put the data.
- * Note that it is safe to drop the lock after changing rq->tail
- * since ipath_post_receive() won't fill the empty slot.
- */
- spin_lock_irqsave(&rq->lock, flags);
- wq = rq->wq;
- tail = wq->tail;
- /* Validate tail before using it since it is user writable. */
- if (tail >= rq->size)
- tail = 0;
- if (unlikely(tail == wq->head)) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- wqe = get_rwqe_ptr(rq, tail);
- rsge.sg_list = qp->r_ud_sg_list;
- if (!ipath_init_sge(qp, wqe, &rlen, &rsge)) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- /* Silently drop packets which are too big. */
- if (wc.byte_len > rlen) {
- spin_unlock_irqrestore(&rq->lock, flags);
- dev->n_pkt_drops++;
- goto drop;
- }
- if (++tail >= rq->size)
- tail = 0;
- wq->tail = tail;
- wc.wr_id = wqe->wr_id;
- if (handler) {
- u32 n;
-
- /*
- * validate head pointer value and compute
- * the number of remaining WQEs.
- */
- n = wq->head;
- if (n >= rq->size)
- n = 0;
- if (n < tail)
- n += rq->size - tail;
- else
- n -= tail;
- if (n < srq->limit) {
- struct ib_event ev;
-
- srq->limit = 0;
- spin_unlock_irqrestore(&rq->lock, flags);
- ev.device = qp->ibqp.device;
- ev.element.srq = qp->ibqp.srq;
- ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
- handler(&ev, srq->ibsrq.srq_context);
- } else
- spin_unlock_irqrestore(&rq->lock, flags);
- } else
- spin_unlock_irqrestore(&rq->lock, flags);
-
- ah_attr = &to_iah(swqe->wr.wr.ud.ah)->attr;
- if (ah_attr->ah_flags & IB_AH_GRH) {
- ipath_copy_sge(&rsge, &ah_attr->grh, sizeof(struct ib_grh));
- wc.wc_flags |= IB_WC_GRH;
- } else
- ipath_skip_sge(&rsge, sizeof(struct ib_grh));
- sge = swqe->sg_list;
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- ipath_copy_sge(&rsge, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--swqe->wr.num_sge)
- sge++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- length -= len;
- }
- wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
- wc.qp = &qp->ibqp;
- wc.src_qp = sqp->ibqp.qp_num;
- /* XXX do we know which pkey matched? Only needed for GSI. */
- wc.pkey_index = 0;
- wc.slid = dev->dd->ipath_lid |
- (ah_attr->src_path_bits &
- ((1 << dev->dd->ipath_lmc) - 1));
- wc.sl = ah_attr->sl;
- wc.dlid_path_bits =
- ah_attr->dlid & ((1 << dev->dd->ipath_lmc) - 1);
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- swqe->wr.send_flags & IB_SEND_SOLICITED);
-drop:
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-done:;
-}
-
-/**
- * ipath_make_ud_req - construct a UD request packet
- * @qp: the QP
- *
- * Return 1 if constructed; otherwise, return 0.
- */
-int ipath_make_ud_req(struct ipath_qp *qp)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_other_headers *ohdr;
- struct ib_ah_attr *ah_attr;
- struct ipath_swqe *wqe;
- unsigned long flags;
- u32 nwords;
- u32 extra_bytes;
- u32 bth0;
- u16 lrh0;
- u16 lid;
- int ret = 0;
- int next_cur;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
- if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
- goto bail;
- /* We are in the error state, flush the work request. */
- if (qp->s_last == qp->s_head)
- goto bail;
- /* If DMAs are in progress, we can't flush immediately. */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- wqe = get_swqe_ptr(qp, qp->s_last);
- ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
- goto done;
- }
-
- if (qp->s_cur == qp->s_head)
- goto bail;
-
- wqe = get_swqe_ptr(qp, qp->s_cur);
- next_cur = qp->s_cur + 1;
- if (next_cur >= qp->s_size)
- next_cur = 0;
-
- /* Construct the header. */
- ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
- if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE) {
- if (ah_attr->dlid != IPATH_PERMISSIVE_LID)
- dev->n_multicast_xmit++;
- else
- dev->n_unicast_xmit++;
- } else {
- dev->n_unicast_xmit++;
- lid = ah_attr->dlid & ~((1 << dev->dd->ipath_lmc) - 1);
- if (unlikely(lid == dev->dd->ipath_lid)) {
- /*
- * If DMAs are in progress, we can't generate
- * a completion for the loopback packet since
- * it would be out of order.
- * XXX Instead of waiting, we could queue a
- * zero length descriptor so we get a callback.
- */
- if (atomic_read(&qp->s_dma_busy)) {
- qp->s_flags |= IPATH_S_WAIT_DMA;
- goto bail;
- }
- qp->s_cur = next_cur;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- ipath_ud_loopback(qp, wqe);
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, wqe, IB_WC_SUCCESS);
- goto done;
- }
- }
-
- qp->s_cur = next_cur;
- extra_bytes = -wqe->length & 3;
- nwords = (wqe->length + extra_bytes) >> 2;
-
- /* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */
- qp->s_hdrwords = 7;
- qp->s_cur_size = wqe->length;
- qp->s_cur_sge = &qp->s_sge;
- qp->s_dmult = ah_attr->static_rate;
- qp->s_wqe = wqe;
- qp->s_sge.sge = wqe->sg_list[0];
- qp->s_sge.sg_list = wqe->sg_list + 1;
- qp->s_sge.num_sge = wqe->wr.num_sge;
-
- if (ah_attr->ah_flags & IB_AH_GRH) {
- /* Header size in 32-bit words. */
- qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
- &ah_attr->grh,
- qp->s_hdrwords, nwords);
- lrh0 = IPATH_LRH_GRH;
- ohdr = &qp->s_hdr.u.l.oth;
- /*
- * Don't worry about sending to locally attached multicast
- * QPs. It is unspecified by the spec. what happens.
- */
- } else {
- /* Header size in 32-bit words. */
- lrh0 = IPATH_LRH_BTH;
- ohdr = &qp->s_hdr.u.oth;
- }
- if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
- qp->s_hdrwords++;
- ohdr->u.ud.imm_data = wqe->wr.ex.imm_data;
- bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
- } else
- bth0 = IB_OPCODE_UD_SEND_ONLY << 24;
- lrh0 |= ah_attr->sl << 4;
- if (qp->ibqp.qp_type == IB_QPT_SMI)
- lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */
- qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
- qp->s_hdr.lrh[1] = cpu_to_be16(ah_attr->dlid); /* DEST LID */
- qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
- SIZE_OF_CRC);
- lid = dev->dd->ipath_lid;
- if (lid) {
- lid |= ah_attr->src_path_bits &
- ((1 << dev->dd->ipath_lmc) - 1);
- qp->s_hdr.lrh[3] = cpu_to_be16(lid);
- } else
- qp->s_hdr.lrh[3] = IB_LID_PERMISSIVE;
- if (wqe->wr.send_flags & IB_SEND_SOLICITED)
- bth0 |= 1 << 23;
- bth0 |= extra_bytes << 20;
- bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPATH_DEFAULT_P_KEY :
- ipath_get_pkey(dev->dd, qp->s_pkey_index);
- ohdr->bth[0] = cpu_to_be32(bth0);
- /*
- * Use the multicast QP if the destination LID is a multicast LID.
- */
- ohdr->bth[1] = ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPATH_PERMISSIVE_LID ?
- cpu_to_be32(IPATH_MULTICAST_QPN) :
- cpu_to_be32(wqe->wr.wr.ud.remote_qpn);
- ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPATH_PSN_MASK);
- /*
- * Qkeys with the high order bit set mean use the
- * qkey from the QP context instead of the WR (see 10.2.5).
- */
- ohdr->u.ud.deth[0] = cpu_to_be32((int)wqe->wr.wr.ud.remote_qkey < 0 ?
- qp->qkey : wqe->wr.wr.ud.remote_qkey);
- ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num);
-
-done:
- ret = 1;
- goto unlock;
-
-bail:
- qp->s_flags &= ~IPATH_S_BUSY;
-unlock:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_ud_rcv - receive an incoming UD packet
- * @dev: the device the packet came in on
- * @hdr: the packet header
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP the packet came on
- *
- * This is called from ipath_qp_rcv() to process an incoming UD packet
- * for the given QP.
- * Called at interrupt level.
- */
-void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
-{
- struct ipath_other_headers *ohdr;
- int opcode;
- u32 hdrsize;
- u32 pad;
- struct ib_wc wc;
- u32 qkey;
- u32 src_qp;
- u16 dlid;
- int header_in_data;
-
- /* Check for GRH */
- if (!has_grh) {
- ohdr = &hdr->u.oth;
- hdrsize = 8 + 12 + 8; /* LRH + BTH + DETH */
- qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
- src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
- header_in_data = 0;
- } else {
- ohdr = &hdr->u.l.oth;
- hdrsize = 8 + 40 + 12 + 8; /* LRH + GRH + BTH + DETH */
- /*
- * The header with GRH is 68 bytes and the core driver sets
- * the eager header buffer size to 56 bytes so the last 12
- * bytes of the IB header is in the data buffer.
- */
- header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
- if (header_in_data) {
- qkey = be32_to_cpu(((__be32 *) data)[1]);
- src_qp = be32_to_cpu(((__be32 *) data)[2]);
- data += 12;
- } else {
- qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
- src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
- }
- }
- src_qp &= IPATH_QPN_MASK;
-
- /*
- * Check that the permissive LID is only used on QP0
- * and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1).
- */
- if (qp->ibqp.qp_num) {
- if (unlikely(hdr->lrh[1] == IB_LID_PERMISSIVE ||
- hdr->lrh[3] == IB_LID_PERMISSIVE)) {
- dev->n_pkt_drops++;
- goto bail;
- }
- if (unlikely(qkey != qp->qkey)) {
- /* XXX OK to lose a count once in a while. */
- dev->qkey_violations++;
- dev->n_pkt_drops++;
- goto bail;
- }
- } else if (hdr->lrh[1] == IB_LID_PERMISSIVE ||
- hdr->lrh[3] == IB_LID_PERMISSIVE) {
- struct ib_smp *smp = (struct ib_smp *) data;
-
- if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
- dev->n_pkt_drops++;
- goto bail;
- }
- }
-
- /*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- if (qp->ibqp.qp_num > 1 &&
- opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
- if (header_in_data) {
- wc.ex.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else
- wc.ex.imm_data = ohdr->u.ud.imm_data;
- wc.wc_flags = IB_WC_WITH_IMM;
- hdrsize += sizeof(u32);
- } else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
- wc.ex.imm_data = 0;
- wc.wc_flags = 0;
- } else {
- dev->n_pkt_drops++;
- goto bail;
- }
-
- /* Get the number of bytes the message was padded by. */
- pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
- if (unlikely(tlen < (hdrsize + pad + 4))) {
- /* Drop incomplete packets. */
- dev->n_pkt_drops++;
- goto bail;
- }
- tlen -= hdrsize + pad + 4;
-
- /* Drop invalid MAD packets (see 13.5.3.1). */
- if (unlikely((qp->ibqp.qp_num == 0 &&
- (tlen != 256 ||
- (be16_to_cpu(hdr->lrh[0]) >> 12) != 15)) ||
- (qp->ibqp.qp_num == 1 &&
- (tlen != 256 ||
- (be16_to_cpu(hdr->lrh[0]) >> 12) == 15)))) {
- dev->n_pkt_drops++;
- goto bail;
- }
-
- /*
- * A GRH is expected to precede the data even if not
- * present on the wire.
- */
- wc.byte_len = tlen + sizeof(struct ib_grh);
-
- /*
- * Get the next work request entry to find where to put the data.
- */
- if (qp->r_flags & IPATH_R_REUSE_SGE)
- qp->r_flags &= ~IPATH_R_REUSE_SGE;
- else if (!ipath_get_rwqe(qp, 0)) {
- /*
- * Count VL15 packets dropped due to no receive buffer.
- * Otherwise, count them as buffer overruns since usually,
- * the HW will be able to receive packets even if there are
- * no QPs with posted receive buffers.
- */
- if (qp->ibqp.qp_num == 0)
- dev->n_vl15_dropped++;
- else
- dev->rcv_errors++;
- goto bail;
- }
- /* Silently drop packets which are too big. */
- if (wc.byte_len > qp->r_len) {
- qp->r_flags |= IPATH_R_REUSE_SGE;
- dev->n_pkt_drops++;
- goto bail;
- }
- if (has_grh) {
- ipath_copy_sge(&qp->r_sge, &hdr->u.l.grh,
- sizeof(struct ib_grh));
- wc.wc_flags |= IB_WC_GRH;
- } else
- ipath_skip_sge(&qp->r_sge, sizeof(struct ib_grh));
- ipath_copy_sge(&qp->r_sge, data,
- wc.byte_len - sizeof(struct ib_grh));
- if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
- goto bail;
- wc.wr_id = qp->r_wr_id;
- wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
- wc.qp = &qp->ibqp;
- wc.src_qp = src_qp;
- /* XXX do we know which pkey matched? Only needed for GSI. */
- wc.pkey_index = 0;
- wc.slid = be16_to_cpu(hdr->lrh[3]);
- wc.sl = (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF;
- dlid = be16_to_cpu(hdr->lrh[1]);
- /*
- * Save the LMC lower bits if the destination LID is a unicast LID.
- */
- wc.dlid_path_bits = dlid >= IPATH_MULTICAST_LID_BASE ? 0 :
- dlid & ((1 << dev->dd->ipath_lmc) - 1);
- wc.port_num = 1;
- /* Signal completion event if the solicited bit is set. */
- ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
- (ohdr->bth[0] &
- cpu_to_be32(1 << 23)) != 0);
-
-bail:;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-
-#include "ipath_kernel.h"
-
-static void __ipath_release_user_pages(struct page **p, size_t num_pages,
- int dirty)
-{
- size_t i;
-
- for (i = 0; i < num_pages; i++) {
- ipath_cdbg(MM, "%lu/%lu put_page %p\n", (unsigned long) i,
- (unsigned long) num_pages, p[i]);
- if (dirty)
- set_page_dirty_lock(p[i]);
- put_page(p[i]);
- }
-}
-
-/* call with current->mm->mmap_sem held */
-static int __ipath_get_user_pages(unsigned long start_page, size_t num_pages,
- struct page **p)
-{
- unsigned long lock_limit;
- size_t got;
- int ret;
-
- lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
-
- if (num_pages > lock_limit) {
- ret = -ENOMEM;
- goto bail;
- }
-
- ipath_cdbg(VERBOSE, "pin %lx pages from vaddr %lx\n",
- (unsigned long) num_pages, start_page);
-
- for (got = 0; got < num_pages; got += ret) {
- ret = get_user_pages(current, current->mm,
- start_page + got * PAGE_SIZE,
- num_pages - got, 1, 1,
- p + got, NULL);
- if (ret < 0)
- goto bail_release;
- }
-
- current->mm->pinned_vm += num_pages;
-
- ret = 0;
- goto bail;
-
-bail_release:
- __ipath_release_user_pages(p, got, 0);
-bail:
- return ret;
-}
-
-/**
- * ipath_map_page - a safety wrapper around pci_map_page()
- *
- * A dma_addr of all 0's is interpreted by the chip as "disabled".
- * Unfortunately, it can also be a valid dma_addr returned on some
- * architectures.
- *
- * The powerpc iommu assigns dma_addrs in ascending order, so we don't
- * have to bother with retries or mapping a dummy page to insure we
- * don't just get the same mapping again.
- *
- * I'm sure we won't be so lucky with other iommu's, so FIXME.
- */
-dma_addr_t ipath_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- dma_addr_t phys;
-
- phys = pci_map_page(hwdev, page, offset, size, direction);
-
- if (phys == 0) {
- pci_unmap_page(hwdev, phys, size, direction);
- phys = pci_map_page(hwdev, page, offset, size, direction);
- /*
- * FIXME: If we get 0 again, we should keep this page,
- * map another, then free the 0 page.
- */
- }
-
- return phys;
-}
-
-/**
- * ipath_map_single - a safety wrapper around pci_map_single()
- *
- * Same idea as ipath_map_page().
- */
-dma_addr_t ipath_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
- int direction)
-{
- dma_addr_t phys;
-
- phys = pci_map_single(hwdev, ptr, size, direction);
-
- if (phys == 0) {
- pci_unmap_single(hwdev, phys, size, direction);
- phys = pci_map_single(hwdev, ptr, size, direction);
- /*
- * FIXME: If we get 0 again, we should keep this page,
- * map another, then free the 0 page.
- */
- }
-
- return phys;
-}
-
-/**
- * ipath_get_user_pages - lock user pages into memory
- * @start_page: the start page
- * @num_pages: the number of pages
- * @p: the output page structures
- *
- * This function takes a given start page (page aligned user virtual
- * address) and pins it and the following specified number of pages. For
- * now, num_pages is always 1, but that will probably change at some point
- * (because caller is doing expected sends on a single virtually contiguous
- * buffer, so we can do all pages at once).
- */
-int ipath_get_user_pages(unsigned long start_page, size_t num_pages,
- struct page **p)
-{
- int ret;
-
- down_write(¤t->mm->mmap_sem);
-
- ret = __ipath_get_user_pages(start_page, num_pages, p);
-
- up_write(¤t->mm->mmap_sem);
-
- return ret;
-}
-
-void ipath_release_user_pages(struct page **p, size_t num_pages)
-{
- down_write(¤t->mm->mmap_sem);
-
- __ipath_release_user_pages(p, num_pages, 1);
-
- current->mm->pinned_vm -= num_pages;
-
- up_write(¤t->mm->mmap_sem);
-}
-
-struct ipath_user_pages_work {
- struct work_struct work;
- struct mm_struct *mm;
- unsigned long num_pages;
-};
-
-static void user_pages_account(struct work_struct *_work)
-{
- struct ipath_user_pages_work *work =
- container_of(_work, struct ipath_user_pages_work, work);
-
- down_write(&work->mm->mmap_sem);
- work->mm->pinned_vm -= work->num_pages;
- up_write(&work->mm->mmap_sem);
- mmput(work->mm);
- kfree(work);
-}
-
-void ipath_release_user_pages_on_close(struct page **p, size_t num_pages)
-{
- struct ipath_user_pages_work *work;
- struct mm_struct *mm;
-
- __ipath_release_user_pages(p, num_pages, 1);
-
- mm = get_task_mm(current);
- if (!mm)
- return;
-
- work = kmalloc(sizeof(*work), GFP_KERNEL);
- if (!work)
- goto bail_mm;
-
- INIT_WORK(&work->work, user_pages_account);
- work->mm = mm;
- work->num_pages = num_pages;
-
- queue_work(ib_wq, &work->work);
- return;
-
-bail_mm:
- mmput(mm);
- return;
-}
+++ /dev/null
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/dmapool.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/highmem.h>
-#include <linux/io.h>
-#include <linux/uio.h>
-#include <linux/rbtree.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include "ipath_kernel.h"
-#include "ipath_user_sdma.h"
-
-/* minimum size of header */
-#define IPATH_USER_SDMA_MIN_HEADER_LENGTH 64
-/* expected size of headers (for dma_pool) */
-#define IPATH_USER_SDMA_EXP_HEADER_LENGTH 64
-/* length mask in PBC (lower 11 bits) */
-#define IPATH_PBC_LENGTH_MASK ((1 << 11) - 1)
-
-struct ipath_user_sdma_pkt {
- u8 naddr; /* dimension of addr (1..3) ... */
- u32 counter; /* sdma pkts queued counter for this entry */
- u64 added; /* global descq number of entries */
-
- struct {
- u32 offset; /* offset for kvaddr, addr */
- u32 length; /* length in page */
- u8 put_page; /* should we put_page? */
- u8 dma_mapped; /* is page dma_mapped? */
- struct page *page; /* may be NULL (coherent mem) */
- void *kvaddr; /* FIXME: only for pio hack */
- dma_addr_t addr;
- } addr[4]; /* max pages, any more and we coalesce */
- struct list_head list; /* list element */
-};
-
-struct ipath_user_sdma_queue {
- /*
- * pkts sent to dma engine are queued on this
- * list head. the type of the elements of this
- * list are struct ipath_user_sdma_pkt...
- */
- struct list_head sent;
-
- /* headers with expected length are allocated from here... */
- char header_cache_name[64];
- struct dma_pool *header_cache;
-
- /* packets are allocated from the slab cache... */
- char pkt_slab_name[64];
- struct kmem_cache *pkt_slab;
-
- /* as packets go on the queued queue, they are counted... */
- u32 counter;
- u32 sent_counter;
-
- /* dma page table */
- struct rb_root dma_pages_root;
-
- /* protect everything above... */
- struct mutex lock;
-};
-
-struct ipath_user_sdma_queue *
-ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport)
-{
- struct ipath_user_sdma_queue *pq =
- kmalloc(sizeof(struct ipath_user_sdma_queue), GFP_KERNEL);
-
- if (!pq)
- goto done;
-
- pq->counter = 0;
- pq->sent_counter = 0;
- INIT_LIST_HEAD(&pq->sent);
-
- mutex_init(&pq->lock);
-
- snprintf(pq->pkt_slab_name, sizeof(pq->pkt_slab_name),
- "ipath-user-sdma-pkts-%u-%02u.%02u", unit, port, sport);
- pq->pkt_slab = kmem_cache_create(pq->pkt_slab_name,
- sizeof(struct ipath_user_sdma_pkt),
- 0, 0, NULL);
-
- if (!pq->pkt_slab)
- goto err_kfree;
-
- snprintf(pq->header_cache_name, sizeof(pq->header_cache_name),
- "ipath-user-sdma-headers-%u-%02u.%02u", unit, port, sport);
- pq->header_cache = dma_pool_create(pq->header_cache_name,
- dev,
- IPATH_USER_SDMA_EXP_HEADER_LENGTH,
- 4, 0);
- if (!pq->header_cache)
- goto err_slab;
-
- pq->dma_pages_root = RB_ROOT;
-
- goto done;
-
-err_slab:
- kmem_cache_destroy(pq->pkt_slab);
-err_kfree:
- kfree(pq);
- pq = NULL;
-
-done:
- return pq;
-}
-
-static void ipath_user_sdma_init_frag(struct ipath_user_sdma_pkt *pkt,
- int i, size_t offset, size_t len,
- int put_page, int dma_mapped,
- struct page *page,
- void *kvaddr, dma_addr_t dma_addr)
-{
- pkt->addr[i].offset = offset;
- pkt->addr[i].length = len;
- pkt->addr[i].put_page = put_page;
- pkt->addr[i].dma_mapped = dma_mapped;
- pkt->addr[i].page = page;
- pkt->addr[i].kvaddr = kvaddr;
- pkt->addr[i].addr = dma_addr;
-}
-
-static void ipath_user_sdma_init_header(struct ipath_user_sdma_pkt *pkt,
- u32 counter, size_t offset,
- size_t len, int dma_mapped,
- struct page *page,
- void *kvaddr, dma_addr_t dma_addr)
-{
- pkt->naddr = 1;
- pkt->counter = counter;
- ipath_user_sdma_init_frag(pkt, 0, offset, len, 0, dma_mapped, page,
- kvaddr, dma_addr);
-}
-
-/* we've too many pages in the iovec, coalesce to a single page */
-static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov) {
- int ret = 0;
- struct page *page = alloc_page(GFP_KERNEL);
- void *mpage_save;
- char *mpage;
- int i;
- int len = 0;
- dma_addr_t dma_addr;
-
- if (!page) {
- ret = -ENOMEM;
- goto done;
- }
-
- mpage = kmap(page);
- mpage_save = mpage;
- for (i = 0; i < niov; i++) {
- int cfur;
-
- cfur = copy_from_user(mpage,
- iov[i].iov_base, iov[i].iov_len);
- if (cfur) {
- ret = -EFAULT;
- goto free_unmap;
- }
-
- mpage += iov[i].iov_len;
- len += iov[i].iov_len;
- }
-
- dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto free_unmap;
- }
-
- ipath_user_sdma_init_frag(pkt, 1, 0, len, 0, 1, page, mpage_save,
- dma_addr);
- pkt->naddr = 2;
-
- goto done;
-
-free_unmap:
- kunmap(page);
- __free_page(page);
-done:
- return ret;
-}
-
-/* how many pages in this iovec element? */
-static int ipath_user_sdma_num_pages(const struct iovec *iov)
-{
- const unsigned long addr = (unsigned long) iov->iov_base;
- const unsigned long len = iov->iov_len;
- const unsigned long spage = addr & PAGE_MASK;
- const unsigned long epage = (addr + len - 1) & PAGE_MASK;
-
- return 1 + ((epage - spage) >> PAGE_SHIFT);
-}
-
-/* truncate length to page boundary */
-static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
-{
- const unsigned long offset = addr & ~PAGE_MASK;
-
- return ((offset + len) > PAGE_SIZE) ? (PAGE_SIZE - offset) : len;
-}
-
-static void ipath_user_sdma_free_pkt_frag(struct device *dev,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- int frag)
-{
- const int i = frag;
-
- if (pkt->addr[i].page) {
- if (pkt->addr[i].dma_mapped)
- dma_unmap_page(dev,
- pkt->addr[i].addr,
- pkt->addr[i].length,
- DMA_TO_DEVICE);
-
- if (pkt->addr[i].kvaddr)
- kunmap(pkt->addr[i].page);
-
- if (pkt->addr[i].put_page)
- put_page(pkt->addr[i].page);
- else
- __free_page(pkt->addr[i].page);
- } else if (pkt->addr[i].kvaddr)
- /* free coherent mem from cache... */
- dma_pool_free(pq->header_cache,
- pkt->addr[i].kvaddr, pkt->addr[i].addr);
-}
-
-/* return number of pages pinned... */
-static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt,
- unsigned long addr, int tlen, int npages)
-{
- struct page *pages[2];
- int j;
- int ret;
-
- ret = get_user_pages_fast(addr, npages, 0, pages);
- if (ret != npages) {
- int i;
-
- for (i = 0; i < ret; i++)
- put_page(pages[i]);
-
- ret = -ENOMEM;
- goto done;
- }
-
- for (j = 0; j < npages; j++) {
- /* map the pages... */
- const int flen =
- ipath_user_sdma_page_length(addr, tlen);
- dma_addr_t dma_addr =
- dma_map_page(&dd->pcidev->dev,
- pages[j], 0, flen, DMA_TO_DEVICE);
- unsigned long fofs = addr & ~PAGE_MASK;
-
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto done;
- }
-
- ipath_user_sdma_init_frag(pkt, pkt->naddr, fofs, flen, 1, 1,
- pages[j], kmap(pages[j]),
- dma_addr);
-
- pkt->naddr++;
- addr += flen;
- tlen -= flen;
- }
-
-done:
- return ret;
-}
-
-static int ipath_user_sdma_pin_pkt(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov)
-{
- int ret = 0;
- unsigned long idx;
-
- for (idx = 0; idx < niov; idx++) {
- const int npages = ipath_user_sdma_num_pages(iov + idx);
- const unsigned long addr = (unsigned long) iov[idx].iov_base;
-
- ret = ipath_user_sdma_pin_pages(dd, pkt,
- addr, iov[idx].iov_len,
- npages);
- if (ret < 0)
- goto free_pkt;
- }
-
- goto done;
-
-free_pkt:
- for (idx = 0; idx < pkt->naddr; idx++)
- ipath_user_sdma_free_pkt_frag(&dd->pcidev->dev, pq, pkt, idx);
-
-done:
- return ret;
-}
-
-static int ipath_user_sdma_init_payload(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct ipath_user_sdma_pkt *pkt,
- const struct iovec *iov,
- unsigned long niov, int npages)
-{
- int ret = 0;
-
- if (npages >= ARRAY_SIZE(pkt->addr))
- ret = ipath_user_sdma_coalesce(dd, pkt, iov, niov);
- else
- ret = ipath_user_sdma_pin_pkt(dd, pq, pkt, iov, niov);
-
- return ret;
-}
-
-/* free a packet list -- return counter value of last packet */
-static void ipath_user_sdma_free_pkt_list(struct device *dev,
- struct ipath_user_sdma_queue *pq,
- struct list_head *list)
-{
- struct ipath_user_sdma_pkt *pkt, *pkt_next;
-
- list_for_each_entry_safe(pkt, pkt_next, list, list) {
- int i;
-
- for (i = 0; i < pkt->naddr; i++)
- ipath_user_sdma_free_pkt_frag(dev, pq, pkt, i);
-
- kmem_cache_free(pq->pkt_slab, pkt);
- }
-}
-
-/*
- * copy headers, coalesce etc -- pq->lock must be held
- *
- * we queue all the packets to list, returning the
- * number of bytes total. list must be empty initially,
- * as, if there is an error we clean it...
- */
-static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct list_head *list,
- const struct iovec *iov,
- unsigned long niov,
- int maxpkts)
-{
- unsigned long idx = 0;
- int ret = 0;
- int npkts = 0;
- struct page *page = NULL;
- __le32 *pbc;
- dma_addr_t dma_addr;
- struct ipath_user_sdma_pkt *pkt = NULL;
- size_t len;
- size_t nw;
- u32 counter = pq->counter;
- int dma_mapped = 0;
-
- while (idx < niov && npkts < maxpkts) {
- const unsigned long addr = (unsigned long) iov[idx].iov_base;
- const unsigned long idx_save = idx;
- unsigned pktnw;
- unsigned pktnwc;
- int nfrags = 0;
- int npages = 0;
- int cfur;
-
- dma_mapped = 0;
- len = iov[idx].iov_len;
- nw = len >> 2;
- page = NULL;
-
- pkt = kmem_cache_alloc(pq->pkt_slab, GFP_KERNEL);
- if (!pkt) {
- ret = -ENOMEM;
- goto free_list;
- }
-
- if (len < IPATH_USER_SDMA_MIN_HEADER_LENGTH ||
- len > PAGE_SIZE || len & 3 || addr & 3) {
- ret = -EINVAL;
- goto free_pkt;
- }
-
- if (len == IPATH_USER_SDMA_EXP_HEADER_LENGTH)
- pbc = dma_pool_alloc(pq->header_cache, GFP_KERNEL,
- &dma_addr);
- else
- pbc = NULL;
-
- if (!pbc) {
- page = alloc_page(GFP_KERNEL);
- if (!page) {
- ret = -ENOMEM;
- goto free_pkt;
- }
- pbc = kmap(page);
- }
-
- cfur = copy_from_user(pbc, iov[idx].iov_base, len);
- if (cfur) {
- ret = -EFAULT;
- goto free_pbc;
- }
-
- /*
- * this assignment is a bit strange. it's because the
- * the pbc counts the number of 32 bit words in the full
- * packet _except_ the first word of the pbc itself...
- */
- pktnwc = nw - 1;
-
- /*
- * pktnw computation yields the number of 32 bit words
- * that the caller has indicated in the PBC. note that
- * this is one less than the total number of words that
- * goes to the send DMA engine as the first 32 bit word
- * of the PBC itself is not counted. Armed with this count,
- * we can verify that the packet is consistent with the
- * iovec lengths.
- */
- pktnw = le32_to_cpu(*pbc) & IPATH_PBC_LENGTH_MASK;
- if (pktnw < pktnwc || pktnw > pktnwc + (PAGE_SIZE >> 2)) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
-
- idx++;
- while (pktnwc < pktnw && idx < niov) {
- const size_t slen = iov[idx].iov_len;
- const unsigned long faddr =
- (unsigned long) iov[idx].iov_base;
-
- if (slen & 3 || faddr & 3 || !slen ||
- slen > PAGE_SIZE) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
- npages++;
- if ((faddr & PAGE_MASK) !=
- ((faddr + slen - 1) & PAGE_MASK))
- npages++;
-
- pktnwc += slen >> 2;
- idx++;
- nfrags++;
- }
-
- if (pktnwc != pktnw) {
- ret = -EINVAL;
- goto free_pbc;
- }
-
- if (page) {
- dma_addr = dma_map_page(&dd->pcidev->dev,
- page, 0, len, DMA_TO_DEVICE);
- if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
- ret = -ENOMEM;
- goto free_pbc;
- }
-
- dma_mapped = 1;
- }
-
- ipath_user_sdma_init_header(pkt, counter, 0, len, dma_mapped,
- page, pbc, dma_addr);
-
- if (nfrags) {
- ret = ipath_user_sdma_init_payload(dd, pq, pkt,
- iov + idx_save + 1,
- nfrags, npages);
- if (ret < 0)
- goto free_pbc_dma;
- }
-
- counter++;
- npkts++;
-
- list_add_tail(&pkt->list, list);
- }
-
- ret = idx;
- goto done;
-
-free_pbc_dma:
- if (dma_mapped)
- dma_unmap_page(&dd->pcidev->dev, dma_addr, len, DMA_TO_DEVICE);
-free_pbc:
- if (page) {
- kunmap(page);
- __free_page(page);
- } else
- dma_pool_free(pq->header_cache, pbc, dma_addr);
-free_pkt:
- kmem_cache_free(pq->pkt_slab, pkt);
-free_list:
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, list);
-done:
- return ret;
-}
-
-static void ipath_user_sdma_set_complete_counter(struct ipath_user_sdma_queue *pq,
- u32 c)
-{
- pq->sent_counter = c;
-}
-
-/* try to clean out queue -- needs pq->lock */
-static int ipath_user_sdma_queue_clean(const struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- struct list_head free_list;
- struct ipath_user_sdma_pkt *pkt;
- struct ipath_user_sdma_pkt *pkt_prev;
- int ret = 0;
-
- INIT_LIST_HEAD(&free_list);
-
- list_for_each_entry_safe(pkt, pkt_prev, &pq->sent, list) {
- s64 descd = dd->ipath_sdma_descq_removed - pkt->added;
-
- if (descd < 0)
- break;
-
- list_move_tail(&pkt->list, &free_list);
-
- /* one more packet cleaned */
- ret++;
- }
-
- if (!list_empty(&free_list)) {
- u32 counter;
-
- pkt = list_entry(free_list.prev,
- struct ipath_user_sdma_pkt, list);
- counter = pkt->counter;
-
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
- ipath_user_sdma_set_complete_counter(pq, counter);
- }
-
- return ret;
-}
-
-void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq)
-{
- if (!pq)
- return;
-
- kmem_cache_destroy(pq->pkt_slab);
- dma_pool_destroy(pq->header_cache);
- kfree(pq);
-}
-
-/* clean descriptor queue, returns > 0 if some elements cleaned */
-static int ipath_user_sdma_hwqueue_clean(struct ipath_devdata *dd)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
- ret = ipath_sdma_make_progress(dd);
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- return ret;
-}
-
-/* we're in close, drain packets so that we can cleanup successfully... */
-void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- int i;
-
- if (!pq)
- return;
-
- for (i = 0; i < 100; i++) {
- mutex_lock(&pq->lock);
- if (list_empty(&pq->sent)) {
- mutex_unlock(&pq->lock);
- break;
- }
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- mutex_unlock(&pq->lock);
- msleep(10);
- }
-
- if (!list_empty(&pq->sent)) {
- struct list_head free_list;
-
- printk(KERN_INFO "drain: lists not empty: forcing!\n");
- INIT_LIST_HEAD(&free_list);
- mutex_lock(&pq->lock);
- list_splice_init(&pq->sent, &free_list);
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
- mutex_unlock(&pq->lock);
- }
-}
-
-static inline __le64 ipath_sdma_make_desc0(struct ipath_devdata *dd,
- u64 addr, u64 dwlen, u64 dwoffset)
-{
- return cpu_to_le64(/* SDmaPhyAddr[31:0] */
- ((addr & 0xfffffffcULL) << 32) |
- /* SDmaGeneration[1:0] */
- ((dd->ipath_sdma_generation & 3ULL) << 30) |
- /* SDmaDwordCount[10:0] */
- ((dwlen & 0x7ffULL) << 16) |
- /* SDmaBufOffset[12:2] */
- (dwoffset & 0x7ffULL));
-}
-
-static inline __le64 ipath_sdma_make_first_desc0(__le64 descq)
-{
- return descq | cpu_to_le64(1ULL << 12);
-}
-
-static inline __le64 ipath_sdma_make_last_desc0(__le64 descq)
-{
- /* last */ /* dma head */
- return descq | cpu_to_le64(1ULL << 11 | 1ULL << 13);
-}
-
-static inline __le64 ipath_sdma_make_desc1(u64 addr)
-{
- /* SDmaPhyAddr[47:32] */
- return cpu_to_le64(addr >> 32);
-}
-
-static void ipath_user_sdma_send_frag(struct ipath_devdata *dd,
- struct ipath_user_sdma_pkt *pkt, int idx,
- unsigned ofs, u16 tail)
-{
- const u64 addr = (u64) pkt->addr[idx].addr +
- (u64) pkt->addr[idx].offset;
- const u64 dwlen = (u64) pkt->addr[idx].length / 4;
- __le64 *descqp;
- __le64 descq0;
-
- descqp = &dd->ipath_sdma_descq[tail].qw[0];
-
- descq0 = ipath_sdma_make_desc0(dd, addr, dwlen, ofs);
- if (idx == 0)
- descq0 = ipath_sdma_make_first_desc0(descq0);
- if (idx == pkt->naddr - 1)
- descq0 = ipath_sdma_make_last_desc0(descq0);
-
- descqp[0] = descq0;
- descqp[1] = ipath_sdma_make_desc1(addr);
-}
-
-/* pq->lock must be held, get packets on the wire... */
-static int ipath_user_sdma_push_pkts(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- struct list_head *pktlist)
-{
- int ret = 0;
- unsigned long flags;
- u16 tail;
-
- if (list_empty(pktlist))
- return 0;
-
- if (unlikely(!(dd->ipath_flags & IPATH_LINKACTIVE)))
- return -ECOMM;
-
- spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
-
- if (unlikely(dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK)) {
- ret = -ECOMM;
- goto unlock;
- }
-
- tail = dd->ipath_sdma_descq_tail;
- while (!list_empty(pktlist)) {
- struct ipath_user_sdma_pkt *pkt =
- list_entry(pktlist->next, struct ipath_user_sdma_pkt,
- list);
- int i;
- unsigned ofs = 0;
- u16 dtail = tail;
-
- if (pkt->naddr > ipath_sdma_descq_freecnt(dd))
- goto unlock_check_tail;
-
- for (i = 0; i < pkt->naddr; i++) {
- ipath_user_sdma_send_frag(dd, pkt, i, ofs, tail);
- ofs += pkt->addr[i].length >> 2;
-
- if (++tail == dd->ipath_sdma_descq_cnt) {
- tail = 0;
- ++dd->ipath_sdma_generation;
- }
- }
-
- if ((ofs<<2) > dd->ipath_ibmaxlen) {
- ipath_dbg("packet size %X > ibmax %X, fail\n",
- ofs<<2, dd->ipath_ibmaxlen);
- ret = -EMSGSIZE;
- goto unlock;
- }
-
- /*
- * if the packet is >= 2KB mtu equivalent, we have to use
- * the large buffers, and have to mark each descriptor as
- * part of a large buffer packet.
- */
- if (ofs >= IPATH_SMALLBUF_DWORDS) {
- for (i = 0; i < pkt->naddr; i++) {
- dd->ipath_sdma_descq[dtail].qw[0] |=
- cpu_to_le64(1ULL << 14);
- if (++dtail == dd->ipath_sdma_descq_cnt)
- dtail = 0;
- }
- }
-
- dd->ipath_sdma_descq_added += pkt->naddr;
- pkt->added = dd->ipath_sdma_descq_added;
- list_move_tail(&pkt->list, &pq->sent);
- ret++;
- }
-
-unlock_check_tail:
- /* advance the tail on the chip if necessary */
- if (dd->ipath_sdma_descq_tail != tail) {
- wmb();
- ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
- dd->ipath_sdma_descq_tail = tail;
- }
-
-unlock:
- spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
-
- return ret;
-}
-
-int ipath_user_sdma_writev(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- const struct iovec *iov,
- unsigned long dim)
-{
- int ret = 0;
- struct list_head list;
- int npkts = 0;
-
- INIT_LIST_HEAD(&list);
-
- mutex_lock(&pq->lock);
-
- if (dd->ipath_sdma_descq_added != dd->ipath_sdma_descq_removed) {
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- }
-
- while (dim) {
- const int mxp = 8;
-
- ret = ipath_user_sdma_queue_pkts(dd, pq, &list, iov, dim, mxp);
- if (ret <= 0)
- goto done_unlock;
- else {
- dim -= ret;
- iov += ret;
- }
-
- /* force packets onto the sdma hw queue... */
- if (!list_empty(&list)) {
- /*
- * lazily clean hw queue. the 4 is a guess of about
- * how many sdma descriptors a packet will take (it
- * doesn't have to be perfect).
- */
- if (ipath_sdma_descq_freecnt(dd) < ret * 4) {
- ipath_user_sdma_hwqueue_clean(dd);
- ipath_user_sdma_queue_clean(dd, pq);
- }
-
- ret = ipath_user_sdma_push_pkts(dd, pq, &list);
- if (ret < 0)
- goto done_unlock;
- else {
- npkts += ret;
- pq->counter += ret;
-
- if (!list_empty(&list))
- goto done_unlock;
- }
- }
- }
-
-done_unlock:
- if (!list_empty(&list))
- ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &list);
- mutex_unlock(&pq->lock);
-
- return (ret < 0) ? ret : npkts;
-}
-
-int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq)
-{
- int ret = 0;
-
- mutex_lock(&pq->lock);
- ipath_user_sdma_hwqueue_clean(dd);
- ret = ipath_user_sdma_queue_clean(dd, pq);
- mutex_unlock(&pq->lock);
-
- return ret;
-}
-
-u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq)
-{
- return pq->sent_counter;
-}
-
-u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq)
-{
- return pq->counter;
-}
-
+++ /dev/null
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-#include <linux/device.h>
-
-struct ipath_user_sdma_queue;
-
-struct ipath_user_sdma_queue *
-ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport);
-void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq);
-
-int ipath_user_sdma_writev(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq,
- const struct iovec *iov,
- unsigned long dim);
-
-int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq);
-
-void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
- struct ipath_user_sdma_queue *pq);
-
-u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq);
-u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq);
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <rdma/ib_mad.h>
-#include <rdma/ib_user_verbs.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/utsname.h>
-#include <linux/rculist.h>
-
-#include "ipath_kernel.h"
-#include "ipath_verbs.h"
-#include "ipath_common.h"
-
-static unsigned int ib_ipath_qp_table_size = 251;
-module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO);
-MODULE_PARM_DESC(qp_table_size, "QP table size");
-
-unsigned int ib_ipath_lkey_table_size = 12;
-module_param_named(lkey_table_size, ib_ipath_lkey_table_size, uint,
- S_IRUGO);
-MODULE_PARM_DESC(lkey_table_size,
- "LKEY table size in bits (2^n, 1 <= n <= 23)");
-
-static unsigned int ib_ipath_max_pds = 0xFFFF;
-module_param_named(max_pds, ib_ipath_max_pds, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_pds,
- "Maximum number of protection domains to support");
-
-static unsigned int ib_ipath_max_ahs = 0xFFFF;
-module_param_named(max_ahs, ib_ipath_max_ahs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support");
-
-unsigned int ib_ipath_max_cqes = 0x2FFFF;
-module_param_named(max_cqes, ib_ipath_max_cqes, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_cqes,
- "Maximum number of completion queue entries to support");
-
-unsigned int ib_ipath_max_cqs = 0x1FFFF;
-module_param_named(max_cqs, ib_ipath_max_cqs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support");
-
-unsigned int ib_ipath_max_qp_wrs = 0x3FFF;
-module_param_named(max_qp_wrs, ib_ipath_max_qp_wrs, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support");
-
-unsigned int ib_ipath_max_qps = 16384;
-module_param_named(max_qps, ib_ipath_max_qps, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support");
-
-unsigned int ib_ipath_max_sges = 0x60;
-module_param_named(max_sges, ib_ipath_max_sges, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support");
-
-unsigned int ib_ipath_max_mcast_grps = 16384;
-module_param_named(max_mcast_grps, ib_ipath_max_mcast_grps, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_mcast_grps,
- "Maximum number of multicast groups to support");
-
-unsigned int ib_ipath_max_mcast_qp_attached = 16;
-module_param_named(max_mcast_qp_attached, ib_ipath_max_mcast_qp_attached,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_mcast_qp_attached,
- "Maximum number of attached QPs to support");
-
-unsigned int ib_ipath_max_srqs = 1024;
-module_param_named(max_srqs, ib_ipath_max_srqs, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support");
-
-unsigned int ib_ipath_max_srq_sges = 128;
-module_param_named(max_srq_sges, ib_ipath_max_srq_sges,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support");
-
-unsigned int ib_ipath_max_srq_wrs = 0x1FFFF;
-module_param_named(max_srq_wrs, ib_ipath_max_srq_wrs,
- uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support");
-
-static unsigned int ib_ipath_disable_sma;
-module_param_named(disable_sma, ib_ipath_disable_sma, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(disable_sma, "Disable the SMA");
-
-/*
- * Note that it is OK to post send work requests in the SQE and ERR
- * states; ipath_do_send() will process them and generate error
- * completions as per IB 1.2 C10-96.
- */
-const int ib_ipath_state_ops[IB_QPS_ERR + 1] = {
- [IB_QPS_RESET] = 0,
- [IB_QPS_INIT] = IPATH_POST_RECV_OK,
- [IB_QPS_RTR] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK,
- [IB_QPS_RTS] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK |
- IPATH_PROCESS_NEXT_SEND_OK,
- [IB_QPS_SQD] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK,
- [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
- [IB_QPS_ERR] = IPATH_POST_RECV_OK | IPATH_FLUSH_RECV |
- IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
-};
-
-struct ipath_ucontext {
- struct ib_ucontext ibucontext;
-};
-
-static inline struct ipath_ucontext *to_iucontext(struct ib_ucontext
- *ibucontext)
-{
- return container_of(ibucontext, struct ipath_ucontext, ibucontext);
-}
-
-/*
- * Translate ib_wr_opcode into ib_wc_opcode.
- */
-const enum ib_wc_opcode ib_ipath_wc_opcode[] = {
- [IB_WR_RDMA_WRITE] = IB_WC_RDMA_WRITE,
- [IB_WR_RDMA_WRITE_WITH_IMM] = IB_WC_RDMA_WRITE,
- [IB_WR_SEND] = IB_WC_SEND,
- [IB_WR_SEND_WITH_IMM] = IB_WC_SEND,
- [IB_WR_RDMA_READ] = IB_WC_RDMA_READ,
- [IB_WR_ATOMIC_CMP_AND_SWP] = IB_WC_COMP_SWAP,
- [IB_WR_ATOMIC_FETCH_AND_ADD] = IB_WC_FETCH_ADD
-};
-
-/*
- * System image GUID.
- */
-static __be64 sys_image_guid;
-
-/**
- * ipath_copy_sge - copy data to SGE memory
- * @ss: the SGE state
- * @data: the data to copy
- * @length: the length of the data
- */
-void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- memcpy(sge->vaddr, data, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- data += len;
- length -= len;
- }
-}
-
-/**
- * ipath_skip_sge - skip over SGE memory - XXX almost dup of prev func
- * @ss: the SGE state
- * @length: the number of bytes to skip
- */
-void ipath_skip_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- length -= len;
- }
-}
-
-/*
- * Count the number of DMA descriptors needed to send length bytes of data.
- * Don't modify the ipath_sge_state to get the count.
- * Return zero if any of the segments is not aligned.
- */
-static u32 ipath_count_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sg_list = ss->sg_list;
- struct ipath_sge sge = ss->sge;
- u8 num_sge = ss->num_sge;
- u32 ndesc = 1; /* count the header */
-
- while (length) {
- u32 len = sge.length;
-
- if (len > length)
- len = length;
- if (len > sge.sge_length)
- len = sge.sge_length;
- BUG_ON(len == 0);
- if (((long) sge.vaddr & (sizeof(u32) - 1)) ||
- (len != length && (len & (sizeof(u32) - 1)))) {
- ndesc = 0;
- break;
- }
- ndesc++;
- sge.vaddr += len;
- sge.length -= len;
- sge.sge_length -= len;
- if (sge.sge_length == 0) {
- if (--num_sge)
- sge = *sg_list++;
- } else if (sge.length == 0 && sge.mr != NULL) {
- if (++sge.n >= IPATH_SEGSZ) {
- if (++sge.m >= sge.mr->mapsz)
- break;
- sge.n = 0;
- }
- sge.vaddr =
- sge.mr->map[sge.m]->segs[sge.n].vaddr;
- sge.length =
- sge.mr->map[sge.m]->segs[sge.n].length;
- }
- length -= len;
- }
- return ndesc;
-}
-
-/*
- * Copy from the SGEs to the data buffer.
- */
-static void ipath_copy_from_sge(void *data, struct ipath_sge_state *ss,
- u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- while (length) {
- u32 len = sge->length;
-
- if (len > length)
- len = length;
- if (len > sge->sge_length)
- len = sge->sge_length;
- BUG_ON(len == 0);
- memcpy(data, sge->vaddr, len);
- sge->vaddr += len;
- sge->length -= len;
- sge->sge_length -= len;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- break;
- sge->n = 0;
- }
- sge->vaddr =
- sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length =
- sge->mr->map[sge->m]->segs[sge->n].length;
- }
- data += len;
- length -= len;
- }
-}
-
-/**
- * ipath_post_one_send - post one RC, UC, or UD send work request
- * @qp: the QP to post on
- * @wr: the work request to send
- */
-static int ipath_post_one_send(struct ipath_qp *qp, struct ib_send_wr *wr)
-{
- struct ipath_swqe *wqe;
- u32 next;
- int i;
- int j;
- int acc;
- int ret;
- unsigned long flags;
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
-
- spin_lock_irqsave(&qp->s_lock, flags);
-
- if (qp->ibqp.qp_type != IB_QPT_SMI &&
- !(dd->ipath_flags & IPATH_LINKACTIVE)) {
- ret = -ENETDOWN;
- goto bail;
- }
-
- /* Check that state is OK to post send. */
- if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK)))
- goto bail_inval;
-
- /* IB spec says that num_sge == 0 is OK. */
- if (wr->num_sge > qp->s_max_sge)
- goto bail_inval;
-
- /*
- * Don't allow RDMA reads or atomic operations on UC or
- * undefined operations.
- * Make sure buffer is large enough to hold the result for atomics.
- */
- if (qp->ibqp.qp_type == IB_QPT_UC) {
- if ((unsigned) wr->opcode >= IB_WR_RDMA_READ)
- goto bail_inval;
- } else if (qp->ibqp.qp_type == IB_QPT_UD) {
- /* Check UD opcode */
- if (wr->opcode != IB_WR_SEND &&
- wr->opcode != IB_WR_SEND_WITH_IMM)
- goto bail_inval;
- /* Check UD destination address PD */
- if (qp->ibqp.pd != wr->wr.ud.ah->pd)
- goto bail_inval;
- } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD)
- goto bail_inval;
- else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
- (wr->num_sge == 0 ||
- wr->sg_list[0].length < sizeof(u64) ||
- wr->sg_list[0].addr & (sizeof(u64) - 1)))
- goto bail_inval;
- else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic)
- goto bail_inval;
-
- next = qp->s_head + 1;
- if (next >= qp->s_size)
- next = 0;
- if (next == qp->s_last) {
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_swqe_ptr(qp, qp->s_head);
- wqe->wr = *wr;
- wqe->length = 0;
- if (wr->num_sge) {
- acc = wr->opcode >= IB_WR_RDMA_READ ?
- IB_ACCESS_LOCAL_WRITE : 0;
- for (i = 0, j = 0; i < wr->num_sge; i++) {
- u32 length = wr->sg_list[i].length;
- int ok;
-
- if (length == 0)
- continue;
- ok = ipath_lkey_ok(qp, &wqe->sg_list[j],
- &wr->sg_list[i], acc);
- if (!ok)
- goto bail_inval;
- wqe->length += length;
- j++;
- }
- wqe->wr.num_sge = j;
- }
- if (qp->ibqp.qp_type == IB_QPT_UC ||
- qp->ibqp.qp_type == IB_QPT_RC) {
- if (wqe->length > 0x80000000U)
- goto bail_inval;
- } else if (wqe->length > to_idev(qp->ibqp.device)->dd->ipath_ibmtu)
- goto bail_inval;
- wqe->ssn = qp->s_ssn++;
- qp->s_head = next;
-
- ret = 0;
- goto bail;
-
-bail_inval:
- ret = -EINVAL;
-bail:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- return ret;
-}
-
-/**
- * ipath_post_send - post a send on a QP
- * @ibqp: the QP to post the send on
- * @wr: the list of work requests to post
- * @bad_wr: the first bad WR is put here
- *
- * This may be called from interrupt context.
- */
-static int ipath_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
- struct ib_send_wr **bad_wr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- int err = 0;
-
- for (; wr; wr = wr->next) {
- err = ipath_post_one_send(qp, wr);
- if (err) {
- *bad_wr = wr;
- goto bail;
- }
- }
-
- /* Try to do the send work in the caller's context. */
- ipath_do_send((unsigned long) qp);
-
-bail:
- return err;
-}
-
-/**
- * ipath_post_receive - post a receive on a QP
- * @ibqp: the QP to post the receive on
- * @wr: the WR to post
- * @bad_wr: the first bad WR is put here
- *
- * This may be called from interrupt context.
- */
-static int ipath_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_rwq *wq = qp->r_rq.wq;
- unsigned long flags;
- int ret;
-
- /* Check that state is OK to post receive. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_POST_RECV_OK) || !wq) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- for (; wr; wr = wr->next) {
- struct ipath_rwqe *wqe;
- u32 next;
- int i;
-
- if ((unsigned) wr->num_sge > qp->r_rq.max_sge) {
- *bad_wr = wr;
- ret = -EINVAL;
- goto bail;
- }
-
- spin_lock_irqsave(&qp->r_rq.lock, flags);
- next = wq->head + 1;
- if (next >= qp->r_rq.size)
- next = 0;
- if (next == wq->tail) {
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
- *bad_wr = wr;
- ret = -ENOMEM;
- goto bail;
- }
-
- wqe = get_rwqe_ptr(&qp->r_rq, wq->head);
- wqe->wr_id = wr->wr_id;
- wqe->num_sge = wr->num_sge;
- for (i = 0; i < wr->num_sge; i++)
- wqe->sg_list[i] = wr->sg_list[i];
- /* Make sure queue entry is written before the head index. */
- smp_wmb();
- wq->head = next;
- spin_unlock_irqrestore(&qp->r_rq.lock, flags);
- }
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_qp_rcv - processing an incoming packet on a QP
- * @dev: the device the packet came on
- * @hdr: the packet header
- * @has_grh: true if the packet has a GRH
- * @data: the packet data
- * @tlen: the packet length
- * @qp: the QP the packet came on
- *
- * This is called from ipath_ib_rcv() to process an incoming packet
- * for the given QP.
- * Called at interrupt level.
- */
-static void ipath_qp_rcv(struct ipath_ibdev *dev,
- struct ipath_ib_header *hdr, int has_grh,
- void *data, u32 tlen, struct ipath_qp *qp)
-{
- /* Check for valid receive state. */
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
- dev->n_pkt_drops++;
- return;
- }
-
- switch (qp->ibqp.qp_type) {
- case IB_QPT_SMI:
- case IB_QPT_GSI:
- if (ib_ipath_disable_sma)
- break;
- /* FALLTHROUGH */
- case IB_QPT_UD:
- ipath_ud_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- case IB_QPT_RC:
- ipath_rc_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- case IB_QPT_UC:
- ipath_uc_rcv(dev, hdr, has_grh, data, tlen, qp);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * ipath_ib_rcv - process an incoming packet
- * @arg: the device pointer
- * @rhdr: the header of the packet
- * @data: the packet data
- * @tlen: the packet length
- *
- * This is called from ipath_kreceive() to process an incoming packet at
- * interrupt level. Tlen is the length of the header + data + CRC in bytes.
- */
-void ipath_ib_rcv(struct ipath_ibdev *dev, void *rhdr, void *data,
- u32 tlen)
-{
- struct ipath_ib_header *hdr = rhdr;
- struct ipath_other_headers *ohdr;
- struct ipath_qp *qp;
- u32 qp_num;
- int lnh;
- u8 opcode;
- u16 lid;
-
- if (unlikely(dev == NULL))
- goto bail;
-
- if (unlikely(tlen < 24)) { /* LRH+BTH+CRC */
- dev->rcv_errors++;
- goto bail;
- }
-
- /* Check for a valid destination LID (see ch. 7.11.1). */
- lid = be16_to_cpu(hdr->lrh[1]);
- if (lid < IPATH_MULTICAST_LID_BASE) {
- lid &= ~((1 << dev->dd->ipath_lmc) - 1);
- if (unlikely(lid != dev->dd->ipath_lid)) {
- dev->rcv_errors++;
- goto bail;
- }
- }
-
- /* Check for GRH */
- lnh = be16_to_cpu(hdr->lrh[0]) & 3;
- if (lnh == IPATH_LRH_BTH)
- ohdr = &hdr->u.oth;
- else if (lnh == IPATH_LRH_GRH)
- ohdr = &hdr->u.l.oth;
- else {
- dev->rcv_errors++;
- goto bail;
- }
-
- opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
- dev->opstats[opcode].n_bytes += tlen;
- dev->opstats[opcode].n_packets++;
-
- /* Get the destination QP number. */
- qp_num = be32_to_cpu(ohdr->bth[1]) & IPATH_QPN_MASK;
- if (qp_num == IPATH_MULTICAST_QPN) {
- struct ipath_mcast *mcast;
- struct ipath_mcast_qp *p;
-
- if (lnh != IPATH_LRH_GRH) {
- dev->n_pkt_drops++;
- goto bail;
- }
- mcast = ipath_mcast_find(&hdr->u.l.grh.dgid);
- if (mcast == NULL) {
- dev->n_pkt_drops++;
- goto bail;
- }
- dev->n_multicast_rcv++;
- list_for_each_entry_rcu(p, &mcast->qp_list, list)
- ipath_qp_rcv(dev, hdr, 1, data, tlen, p->qp);
- /*
- * Notify ipath_multicast_detach() if it is waiting for us
- * to finish.
- */
- if (atomic_dec_return(&mcast->refcount) <= 1)
- wake_up(&mcast->wait);
- } else {
- qp = ipath_lookup_qpn(&dev->qp_table, qp_num);
- if (qp) {
- dev->n_unicast_rcv++;
- ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data,
- tlen, qp);
- /*
- * Notify ipath_destroy_qp() if it is waiting
- * for us to finish.
- */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- } else
- dev->n_pkt_drops++;
- }
-
-bail:;
-}
-
-/**
- * ipath_ib_timer - verbs timer
- * @arg: the device pointer
- *
- * This is called from ipath_do_rcv_timer() at interrupt level to check for
- * QPs which need retransmits and to collect performance numbers.
- */
-static void ipath_ib_timer(struct ipath_ibdev *dev)
-{
- struct ipath_qp *resend = NULL;
- struct ipath_qp *rnr = NULL;
- struct list_head *last;
- struct ipath_qp *qp;
- unsigned long flags;
-
- if (dev == NULL)
- return;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- /* Start filling the next pending queue. */
- if (++dev->pending_index >= ARRAY_SIZE(dev->pending))
- dev->pending_index = 0;
- /* Save any requests still in the new queue, they have timed out. */
- last = &dev->pending[dev->pending_index];
- while (!list_empty(last)) {
- qp = list_entry(last->next, struct ipath_qp, timerwait);
- list_del_init(&qp->timerwait);
- qp->timer_next = resend;
- resend = qp;
- atomic_inc(&qp->refcount);
- }
- last = &dev->rnrwait;
- if (!list_empty(last)) {
- qp = list_entry(last->next, struct ipath_qp, timerwait);
- if (--qp->s_rnr_timeout == 0) {
- do {
- list_del_init(&qp->timerwait);
- qp->timer_next = rnr;
- rnr = qp;
- atomic_inc(&qp->refcount);
- if (list_empty(last))
- break;
- qp = list_entry(last->next, struct ipath_qp,
- timerwait);
- } while (qp->s_rnr_timeout == 0);
- }
- }
- /*
- * We should only be in the started state if pma_sample_start != 0
- */
- if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED &&
- --dev->pma_sample_start == 0) {
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
- ipath_snapshot_counters(dev->dd, &dev->ipath_sword,
- &dev->ipath_rword,
- &dev->ipath_spkts,
- &dev->ipath_rpkts,
- &dev->ipath_xmit_wait);
- }
- if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) {
- if (dev->pma_sample_interval == 0) {
- u64 ta, tb, tc, td, te;
-
- dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
- ipath_snapshot_counters(dev->dd, &ta, &tb,
- &tc, &td, &te);
-
- dev->ipath_sword = ta - dev->ipath_sword;
- dev->ipath_rword = tb - dev->ipath_rword;
- dev->ipath_spkts = tc - dev->ipath_spkts;
- dev->ipath_rpkts = td - dev->ipath_rpkts;
- dev->ipath_xmit_wait = te - dev->ipath_xmit_wait;
- }
- else
- dev->pma_sample_interval--;
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- /* XXX What if timer fires again while this is running? */
- while (resend != NULL) {
- qp = resend;
- resend = qp->timer_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (qp->s_last != qp->s_tail &&
- ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
- dev->n_timeouts++;
- ipath_restart_rc(qp, qp->s_last_psn + 1);
- }
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
- while (rnr != NULL) {
- qp = rnr;
- rnr = qp->timer_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
-}
-
-static void update_sge(struct ipath_sge_state *ss, u32 length)
-{
- struct ipath_sge *sge = &ss->sge;
-
- sge->vaddr += length;
- sge->length -= length;
- sge->sge_length -= length;
- if (sge->sge_length == 0) {
- if (--ss->num_sge)
- *sge = *ss->sg_list++;
- } else if (sge->length == 0 && sge->mr != NULL) {
- if (++sge->n >= IPATH_SEGSZ) {
- if (++sge->m >= sge->mr->mapsz)
- return;
- sge->n = 0;
- }
- sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr;
- sge->length = sge->mr->map[sge->m]->segs[sge->n].length;
- }
-}
-
-#ifdef __LITTLE_ENDIAN
-static inline u32 get_upper_bits(u32 data, u32 shift)
-{
- return data >> shift;
-}
-
-static inline u32 set_upper_bits(u32 data, u32 shift)
-{
- return data << shift;
-}
-
-static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
-{
- data <<= ((sizeof(u32) - n) * BITS_PER_BYTE);
- data >>= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
- return data;
-}
-#else
-static inline u32 get_upper_bits(u32 data, u32 shift)
-{
- return data << shift;
-}
-
-static inline u32 set_upper_bits(u32 data, u32 shift)
-{
- return data >> shift;
-}
-
-static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
-{
- data >>= ((sizeof(u32) - n) * BITS_PER_BYTE);
- data <<= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
- return data;
-}
-#endif
-
-static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
- u32 length, unsigned flush_wc)
-{
- u32 extra = 0;
- u32 data = 0;
- u32 last;
-
- while (1) {
- u32 len = ss->sge.length;
- u32 off;
-
- if (len > length)
- len = length;
- if (len > ss->sge.sge_length)
- len = ss->sge.sge_length;
- BUG_ON(len == 0);
- /* If the source address is not aligned, try to align it. */
- off = (unsigned long)ss->sge.vaddr & (sizeof(u32) - 1);
- if (off) {
- u32 *addr = (u32 *)((unsigned long)ss->sge.vaddr &
- ~(sizeof(u32) - 1));
- u32 v = get_upper_bits(*addr, off * BITS_PER_BYTE);
- u32 y;
-
- y = sizeof(u32) - off;
- if (len > y)
- len = y;
- if (len + extra >= sizeof(u32)) {
- data |= set_upper_bits(v, extra *
- BITS_PER_BYTE);
- len = sizeof(u32) - extra;
- if (len == length) {
- last = data;
- break;
- }
- __raw_writel(data, piobuf);
- piobuf++;
- extra = 0;
- data = 0;
- } else {
- /* Clear unused upper bytes */
- data |= clear_upper_bytes(v, len, extra);
- if (len == length) {
- last = data;
- break;
- }
- extra += len;
- }
- } else if (extra) {
- /* Source address is aligned. */
- u32 *addr = (u32 *) ss->sge.vaddr;
- int shift = extra * BITS_PER_BYTE;
- int ushift = 32 - shift;
- u32 l = len;
-
- while (l >= sizeof(u32)) {
- u32 v = *addr;
-
- data |= set_upper_bits(v, shift);
- __raw_writel(data, piobuf);
- data = get_upper_bits(v, ushift);
- piobuf++;
- addr++;
- l -= sizeof(u32);
- }
- /*
- * We still have 'extra' number of bytes leftover.
- */
- if (l) {
- u32 v = *addr;
-
- if (l + extra >= sizeof(u32)) {
- data |= set_upper_bits(v, shift);
- len -= l + extra - sizeof(u32);
- if (len == length) {
- last = data;
- break;
- }
- __raw_writel(data, piobuf);
- piobuf++;
- extra = 0;
- data = 0;
- } else {
- /* Clear unused upper bytes */
- data |= clear_upper_bytes(v, l,
- extra);
- if (len == length) {
- last = data;
- break;
- }
- extra += l;
- }
- } else if (len == length) {
- last = data;
- break;
- }
- } else if (len == length) {
- u32 w;
-
- /*
- * Need to round up for the last dword in the
- * packet.
- */
- w = (len + 3) >> 2;
- __iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
- piobuf += w - 1;
- last = ((u32 *) ss->sge.vaddr)[w - 1];
- break;
- } else {
- u32 w = len >> 2;
-
- __iowrite32_copy(piobuf, ss->sge.vaddr, w);
- piobuf += w;
-
- extra = len & (sizeof(u32) - 1);
- if (extra) {
- u32 v = ((u32 *) ss->sge.vaddr)[w];
-
- /* Clear unused upper bytes */
- data = clear_upper_bytes(v, extra, 0);
- }
- }
- update_sge(ss, len);
- length -= len;
- }
- /* Update address before sending packet. */
- update_sge(ss, length);
- if (flush_wc) {
- /* must flush early everything before trigger word */
- ipath_flush_wc();
- __raw_writel(last, piobuf);
- /* be sure trigger word is written */
- ipath_flush_wc();
- } else
- __raw_writel(last, piobuf);
-}
-
-/*
- * Convert IB rate to delay multiplier.
- */
-unsigned ipath_ib_rate_to_mult(enum ib_rate rate)
-{
- switch (rate) {
- case IB_RATE_2_5_GBPS: return 8;
- case IB_RATE_5_GBPS: return 4;
- case IB_RATE_10_GBPS: return 2;
- case IB_RATE_20_GBPS: return 1;
- default: return 0;
- }
-}
-
-/*
- * Convert delay multiplier to IB rate
- */
-static enum ib_rate ipath_mult_to_ib_rate(unsigned mult)
-{
- switch (mult) {
- case 8: return IB_RATE_2_5_GBPS;
- case 4: return IB_RATE_5_GBPS;
- case 2: return IB_RATE_10_GBPS;
- case 1: return IB_RATE_20_GBPS;
- default: return IB_RATE_PORT_CURRENT;
- }
-}
-
-static inline struct ipath_verbs_txreq *get_txreq(struct ipath_ibdev *dev)
-{
- struct ipath_verbs_txreq *tx = NULL;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (!list_empty(&dev->txreq_free)) {
- struct list_head *l = dev->txreq_free.next;
-
- list_del(l);
- tx = list_entry(l, struct ipath_verbs_txreq, txreq.list);
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
- return tx;
-}
-
-static inline void put_txreq(struct ipath_ibdev *dev,
- struct ipath_verbs_txreq *tx)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- list_add(&tx->txreq.list, &dev->txreq_free);
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-}
-
-static void sdma_complete(void *cookie, int status)
-{
- struct ipath_verbs_txreq *tx = cookie;
- struct ipath_qp *qp = tx->qp;
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- unsigned long flags;
- enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
- IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
-
- if (atomic_dec_and_test(&qp->s_dma_busy)) {
- spin_lock_irqsave(&qp->s_lock, flags);
- if (tx->wqe)
- ipath_send_complete(qp, tx->wqe, ibs);
- if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
- qp->s_last != qp->s_head) ||
- (qp->s_flags & IPATH_S_WAIT_DMA))
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- wake_up(&qp->wait_dma);
- } else if (tx->wqe) {
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, tx->wqe, ibs);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- }
-
- if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
- kfree(tx->txreq.map_addr);
- put_txreq(dev, tx);
-
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-}
-
-static void decrement_dma_busy(struct ipath_qp *qp)
-{
- unsigned long flags;
-
- if (atomic_dec_and_test(&qp->s_dma_busy)) {
- spin_lock_irqsave(&qp->s_lock, flags);
- if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
- qp->s_last != qp->s_head) ||
- (qp->s_flags & IPATH_S_WAIT_DMA))
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- wake_up(&qp->wait_dma);
- }
-}
-
-/*
- * Compute the number of clock cycles of delay before sending the next packet.
- * The multipliers reflect the number of clocks for the fastest rate so
- * one tick at 4xDDR is 8 ticks at 1xSDR.
- * If the destination port will take longer to receive a packet than
- * the outgoing link can send it, we need to delay sending the next packet
- * by the difference in time it takes the receiver to receive and the sender
- * to send this packet.
- * Note that this delay is always correct for UC and RC but not always
- * optimal for UD. For UD, the destination HCA can be different for each
- * packet, in which case, we could send packets to a different destination
- * while "waiting" for the delay. The overhead for doing this without
- * HW support is more than just paying the cost of delaying some packets
- * unnecessarily.
- */
-static inline unsigned ipath_pkt_delay(u32 plen, u8 snd_mult, u8 rcv_mult)
-{
- return (rcv_mult > snd_mult) ?
- (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
-}
-
-static int ipath_verbs_send_dma(struct ipath_qp *qp,
- struct ipath_ib_header *hdr, u32 hdrwords,
- struct ipath_sge_state *ss, u32 len,
- u32 plen, u32 dwords)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_devdata *dd = dev->dd;
- struct ipath_verbs_txreq *tx;
- u32 *piobuf;
- u32 control;
- u32 ndesc;
- int ret;
-
- tx = qp->s_tx;
- if (tx) {
- qp->s_tx = NULL;
- /* resend previously constructed packet */
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx);
- if (ret) {
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- goto bail;
- }
-
- tx = get_txreq(dev);
- if (!tx) {
- ret = -EBUSY;
- goto bail;
- }
-
- /*
- * Get the saved delay count we computed for the previous packet
- * and save the delay count for this packet to be used next time
- * we get here.
- */
- control = qp->s_pkt_delay;
- qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
-
- tx->qp = qp;
- atomic_inc(&qp->refcount);
- tx->wqe = qp->s_wqe;
- tx->txreq.callback = sdma_complete;
- tx->txreq.callback_cookie = tx;
- tx->txreq.flags = IPATH_SDMA_TXREQ_F_HEADTOHOST |
- IPATH_SDMA_TXREQ_F_INTREQ | IPATH_SDMA_TXREQ_F_FREEDESC;
- if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_USELARGEBUF;
-
- /* VL15 packets bypass credit check */
- if ((be16_to_cpu(hdr->lrh[0]) >> 12) == 15) {
- control |= 1ULL << 31;
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_VL15;
- }
-
- if (len) {
- /*
- * Don't try to DMA if it takes more descriptors than
- * the queue holds.
- */
- ndesc = ipath_count_sge(ss, len);
- if (ndesc >= dd->ipath_sdma_descq_cnt)
- ndesc = 0;
- } else
- ndesc = 1;
- if (ndesc) {
- tx->hdr.pbc[0] = cpu_to_le32(plen);
- tx->hdr.pbc[1] = cpu_to_le32(control);
- memcpy(&tx->hdr.hdr, hdr, hdrwords << 2);
- tx->txreq.sg_count = ndesc;
- tx->map_len = (hdrwords + 2) << 2;
- tx->txreq.map_addr = &tx->hdr;
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, ss, dwords, tx);
- if (ret) {
- /* save ss and length in dwords */
- tx->ss = ss;
- tx->len = dwords;
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- goto bail;
- }
-
- /* Allocate a buffer and copy the header and payload to it. */
- tx->map_len = (plen + 1) << 2;
- piobuf = kmalloc(tx->map_len, GFP_ATOMIC);
- if (unlikely(piobuf == NULL)) {
- ret = -EBUSY;
- goto err_tx;
- }
- tx->txreq.map_addr = piobuf;
- tx->txreq.flags |= IPATH_SDMA_TXREQ_F_FREEBUF;
- tx->txreq.sg_count = 1;
-
- *piobuf++ = (__force u32) cpu_to_le32(plen);
- *piobuf++ = (__force u32) cpu_to_le32(control);
- memcpy(piobuf, hdr, hdrwords << 2);
- ipath_copy_from_sge(piobuf + hdrwords, ss, len);
-
- atomic_inc(&qp->s_dma_busy);
- ret = ipath_sdma_verbs_send(dd, NULL, 0, tx);
- /*
- * If we couldn't queue the DMA request, save the info
- * and try again later rather than destroying the
- * buffer and undoing the side effects of the copy.
- */
- if (ret) {
- tx->ss = NULL;
- tx->len = 0;
- qp->s_tx = tx;
- decrement_dma_busy(qp);
- }
- dev->n_unaligned++;
- goto bail;
-
-err_tx:
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- put_txreq(dev, tx);
-bail:
- return ret;
-}
-
-static int ipath_verbs_send_pio(struct ipath_qp *qp,
- struct ipath_ib_header *ibhdr, u32 hdrwords,
- struct ipath_sge_state *ss, u32 len,
- u32 plen, u32 dwords)
-{
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
- u32 *hdr = (u32 *) ibhdr;
- u32 __iomem *piobuf;
- unsigned flush_wc;
- u32 control;
- int ret;
- unsigned long flags;
-
- piobuf = ipath_getpiobuf(dd, plen, NULL);
- if (unlikely(piobuf == NULL)) {
- ret = -EBUSY;
- goto bail;
- }
-
- /*
- * Get the saved delay count we computed for the previous packet
- * and save the delay count for this packet to be used next time
- * we get here.
- */
- control = qp->s_pkt_delay;
- qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
-
- /* VL15 packets bypass credit check */
- if ((be16_to_cpu(ibhdr->lrh[0]) >> 12) == 15)
- control |= 1ULL << 31;
-
- /*
- * Write the length to the control qword plus any needed flags.
- * We have to flush after the PBC for correctness on some cpus
- * or WC buffer can be written out of order.
- */
- writeq(((u64) control << 32) | plen, piobuf);
- piobuf += 2;
-
- flush_wc = dd->ipath_flags & IPATH_PIO_FLUSH_WC;
- if (len == 0) {
- /*
- * If there is just the header portion, must flush before
- * writing last word of header for correctness, and after
- * the last header word (trigger word).
- */
- if (flush_wc) {
- ipath_flush_wc();
- __iowrite32_copy(piobuf, hdr, hdrwords - 1);
- ipath_flush_wc();
- __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords - 1);
- ipath_flush_wc();
- } else
- __iowrite32_copy(piobuf, hdr, hdrwords);
- goto done;
- }
-
- if (flush_wc)
- ipath_flush_wc();
- __iowrite32_copy(piobuf, hdr, hdrwords);
- piobuf += hdrwords;
-
- /* The common case is aligned and contained in one segment. */
- if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
- !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
- u32 *addr = (u32 *) ss->sge.vaddr;
-
- /* Update address before sending packet. */
- update_sge(ss, len);
- if (flush_wc) {
- __iowrite32_copy(piobuf, addr, dwords - 1);
- /* must flush early everything before trigger word */
- ipath_flush_wc();
- __raw_writel(addr[dwords - 1], piobuf + dwords - 1);
- /* be sure trigger word is written */
- ipath_flush_wc();
- } else
- __iowrite32_copy(piobuf, addr, dwords);
- goto done;
- }
- copy_io(piobuf, ss, len, flush_wc);
-done:
- if (qp->s_wqe) {
- spin_lock_irqsave(&qp->s_lock, flags);
- ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
- spin_unlock_irqrestore(&qp->s_lock, flags);
- }
- ret = 0;
-bail:
- return ret;
-}
-
-/**
- * ipath_verbs_send - send a packet
- * @qp: the QP to send on
- * @hdr: the packet header
- * @hdrwords: the number of 32-bit words in the header
- * @ss: the SGE to send
- * @len: the length of the packet in bytes
- */
-int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
- u32 hdrwords, struct ipath_sge_state *ss, u32 len)
-{
- struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
- u32 plen;
- int ret;
- u32 dwords = (len + 3) >> 2;
-
- /*
- * Calculate the send buffer trigger address.
- * The +1 counts for the pbc control dword following the pbc length.
- */
- plen = hdrwords + dwords + 1;
-
- /*
- * VL15 packets (IB_QPT_SMI) will always use PIO, so we
- * can defer SDMA restart until link goes ACTIVE without
- * worrying about just how we got there.
- */
- if (qp->ibqp.qp_type == IB_QPT_SMI ||
- !(dd->ipath_flags & IPATH_HAS_SEND_DMA))
- ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
- plen, dwords);
- else
- ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
- plen, dwords);
-
- return ret;
-}
-
-int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
- u64 *rwords, u64 *spkts, u64 *rpkts,
- u64 *xmit_wait)
-{
- int ret;
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ret = -EINVAL;
- goto bail;
- }
- *swords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt);
- *rwords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
- *spkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
- *rpkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
- *xmit_wait = ipath_snap_cntr(dd, dd->ipath_cregs->cr_sendstallcnt);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_get_counters - get various chip counters
- * @dd: the infinipath device
- * @cntrs: counters are placed here
- *
- * Return the counters needed by recv_pma_get_portcounters().
- */
-int ipath_get_counters(struct ipath_devdata *dd,
- struct ipath_verbs_counters *cntrs)
-{
- struct ipath_cregs const *crp = dd->ipath_cregs;
- int ret;
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* no hardware, freeze, etc. */
- ret = -EINVAL;
- goto bail;
- }
- cntrs->symbol_error_counter =
- ipath_snap_cntr(dd, crp->cr_ibsymbolerrcnt);
- cntrs->link_error_recovery_counter =
- ipath_snap_cntr(dd, crp->cr_iblinkerrrecovcnt);
- /*
- * The link downed counter counts when the other side downs the
- * connection. We add in the number of times we downed the link
- * due to local link integrity errors to compensate.
- */
- cntrs->link_downed_counter =
- ipath_snap_cntr(dd, crp->cr_iblinkdowncnt);
- cntrs->port_rcv_errors =
- ipath_snap_cntr(dd, crp->cr_rxdroppktcnt) +
- ipath_snap_cntr(dd, crp->cr_rcvovflcnt) +
- ipath_snap_cntr(dd, crp->cr_portovflcnt) +
- ipath_snap_cntr(dd, crp->cr_err_rlencnt) +
- ipath_snap_cntr(dd, crp->cr_invalidrlencnt) +
- ipath_snap_cntr(dd, crp->cr_errlinkcnt) +
- ipath_snap_cntr(dd, crp->cr_erricrccnt) +
- ipath_snap_cntr(dd, crp->cr_errvcrccnt) +
- ipath_snap_cntr(dd, crp->cr_errlpcrccnt) +
- ipath_snap_cntr(dd, crp->cr_badformatcnt) +
- dd->ipath_rxfc_unsupvl_errs;
- if (crp->cr_rxotherlocalphyerrcnt)
- cntrs->port_rcv_errors +=
- ipath_snap_cntr(dd, crp->cr_rxotherlocalphyerrcnt);
- if (crp->cr_rxvlerrcnt)
- cntrs->port_rcv_errors +=
- ipath_snap_cntr(dd, crp->cr_rxvlerrcnt);
- cntrs->port_rcv_remphys_errors =
- ipath_snap_cntr(dd, crp->cr_rcvebpcnt);
- cntrs->port_xmit_discards = ipath_snap_cntr(dd, crp->cr_unsupvlcnt);
- cntrs->port_xmit_data = ipath_snap_cntr(dd, crp->cr_wordsendcnt);
- cntrs->port_rcv_data = ipath_snap_cntr(dd, crp->cr_wordrcvcnt);
- cntrs->port_xmit_packets = ipath_snap_cntr(dd, crp->cr_pktsendcnt);
- cntrs->port_rcv_packets = ipath_snap_cntr(dd, crp->cr_pktrcvcnt);
- cntrs->local_link_integrity_errors =
- crp->cr_locallinkintegrityerrcnt ?
- ipath_snap_cntr(dd, crp->cr_locallinkintegrityerrcnt) :
- ((dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
- dd->ipath_lli_errs : dd->ipath_lli_errors);
- cntrs->excessive_buffer_overrun_errors =
- crp->cr_excessbufferovflcnt ?
- ipath_snap_cntr(dd, crp->cr_excessbufferovflcnt) :
- dd->ipath_overrun_thresh_errs;
- cntrs->vl15_dropped = crp->cr_vl15droppedpktcnt ?
- ipath_snap_cntr(dd, crp->cr_vl15droppedpktcnt) : 0;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_ib_piobufavail - callback when a PIO buffer is available
- * @arg: the device pointer
- *
- * This is called from ipath_intr() at interrupt level when a PIO buffer is
- * available after ipath_verbs_send() returned an error that no buffers were
- * available. Return 1 if we consumed all the PIO buffers and we still have
- * QPs waiting for buffers (for now, just restart the send tasklet and
- * return zero).
- */
-int ipath_ib_piobufavail(struct ipath_ibdev *dev)
-{
- struct list_head *list;
- struct ipath_qp *qplist;
- struct ipath_qp *qp;
- unsigned long flags;
-
- if (dev == NULL)
- goto bail;
-
- list = &dev->piowait;
- qplist = NULL;
-
- spin_lock_irqsave(&dev->pending_lock, flags);
- while (!list_empty(list)) {
- qp = list_entry(list->next, struct ipath_qp, piowait);
- list_del_init(&qp->piowait);
- qp->pio_next = qplist;
- qplist = qp;
- atomic_inc(&qp->refcount);
- }
- spin_unlock_irqrestore(&dev->pending_lock, flags);
-
- while (qplist != NULL) {
- qp = qplist;
- qplist = qp->pio_next;
-
- spin_lock_irqsave(&qp->s_lock, flags);
- if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
- ipath_schedule_send(qp);
- spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
- }
-
-bail:
- return 0;
-}
-
-static int ipath_query_device(struct ib_device *ibdev, struct ib_device_attr *props,
- struct ib_udata *uhw)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
-
- if (uhw->inlen || uhw->outlen)
- return -EINVAL;
-
- memset(props, 0, sizeof(*props));
-
- props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
- IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
- IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
- IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
- props->page_size_cap = PAGE_SIZE;
- props->vendor_id =
- IPATH_SRC_OUI_1 << 16 | IPATH_SRC_OUI_2 << 8 | IPATH_SRC_OUI_3;
- props->vendor_part_id = dev->dd->ipath_deviceid;
- props->hw_ver = dev->dd->ipath_pcirev;
-
- props->sys_image_guid = dev->sys_image_guid;
-
- props->max_mr_size = ~0ull;
- props->max_qp = ib_ipath_max_qps;
- props->max_qp_wr = ib_ipath_max_qp_wrs;
- props->max_sge = ib_ipath_max_sges;
- props->max_cq = ib_ipath_max_cqs;
- props->max_ah = ib_ipath_max_ahs;
- props->max_cqe = ib_ipath_max_cqes;
- props->max_mr = dev->lk_table.max;
- props->max_fmr = dev->lk_table.max;
- props->max_map_per_fmr = 32767;
- props->max_pd = ib_ipath_max_pds;
- props->max_qp_rd_atom = IPATH_MAX_RDMA_ATOMIC;
- props->max_qp_init_rd_atom = 255;
- /* props->max_res_rd_atom */
- props->max_srq = ib_ipath_max_srqs;
- props->max_srq_wr = ib_ipath_max_srq_wrs;
- props->max_srq_sge = ib_ipath_max_srq_sges;
- /* props->local_ca_ack_delay */
- props->atomic_cap = IB_ATOMIC_GLOB;
- props->max_pkeys = ipath_get_npkeys(dev->dd);
- props->max_mcast_grp = ib_ipath_max_mcast_grps;
- props->max_mcast_qp_attach = ib_ipath_max_mcast_qp_attached;
- props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
- props->max_mcast_grp;
-
- return 0;
-}
-
-const u8 ipath_cvt_physportstate[32] = {
- [INFINIPATH_IBCS_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
- [INFINIPATH_IBCS_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
- [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
- [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
- [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
- [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
- [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] =
- IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] =
- IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
- [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
-};
-
-u32 ipath_get_cr_errpkey(struct ipath_devdata *dd)
-{
- return ipath_read_creg32(dd, dd->ipath_cregs->cr_errpkey);
-}
-
-static int ipath_query_port(struct ib_device *ibdev,
- u8 port, struct ib_port_attr *props)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_devdata *dd = dev->dd;
- enum ib_mtu mtu;
- u16 lid = dd->ipath_lid;
- u64 ibcstat;
-
- memset(props, 0, sizeof(*props));
- props->lid = lid ? lid : be16_to_cpu(IB_LID_PERMISSIVE);
- props->lmc = dd->ipath_lmc;
- props->sm_lid = dev->sm_lid;
- props->sm_sl = dev->sm_sl;
- ibcstat = dd->ipath_lastibcstat;
- /* map LinkState to IB portinfo values. */
- props->state = ipath_ib_linkstate(dd, ibcstat) + 1;
-
- /* See phys_state_show() */
- props->phys_state = /* MEA: assumes shift == 0 */
- ipath_cvt_physportstate[dd->ipath_lastibcstat &
- dd->ibcs_lts_mask];
- props->port_cap_flags = dev->port_cap_flags;
- props->gid_tbl_len = 1;
- props->max_msg_sz = 0x80000000;
- props->pkey_tbl_len = ipath_get_npkeys(dd);
- props->bad_pkey_cntr = ipath_get_cr_errpkey(dd) -
- dev->z_pkey_violations;
- props->qkey_viol_cntr = dev->qkey_violations;
- props->active_width = dd->ipath_link_width_active;
- /* See rate_show() */
- props->active_speed = dd->ipath_link_speed_active;
- props->max_vl_num = 1; /* VLCap = VL0 */
- props->init_type_reply = 0;
-
- props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
- switch (dd->ipath_ibmtu) {
- case 4096:
- mtu = IB_MTU_4096;
- break;
- case 2048:
- mtu = IB_MTU_2048;
- break;
- case 1024:
- mtu = IB_MTU_1024;
- break;
- case 512:
- mtu = IB_MTU_512;
- break;
- case 256:
- mtu = IB_MTU_256;
- break;
- default:
- mtu = IB_MTU_2048;
- }
- props->active_mtu = mtu;
- props->subnet_timeout = dev->subnet_timeout;
-
- return 0;
-}
-
-static int ipath_modify_device(struct ib_device *device,
- int device_modify_mask,
- struct ib_device_modify *device_modify)
-{
- int ret;
-
- if (device_modify_mask & ~(IB_DEVICE_MODIFY_SYS_IMAGE_GUID |
- IB_DEVICE_MODIFY_NODE_DESC)) {
- ret = -EOPNOTSUPP;
- goto bail;
- }
-
- if (device_modify_mask & IB_DEVICE_MODIFY_NODE_DESC)
- memcpy(device->node_desc, device_modify->node_desc, 64);
-
- if (device_modify_mask & IB_DEVICE_MODIFY_SYS_IMAGE_GUID)
- to_idev(device)->sys_image_guid =
- cpu_to_be64(device_modify->sys_image_guid);
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static int ipath_modify_port(struct ib_device *ibdev,
- u8 port, int port_modify_mask,
- struct ib_port_modify *props)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
-
- dev->port_cap_flags |= props->set_port_cap_mask;
- dev->port_cap_flags &= ~props->clr_port_cap_mask;
- if (port_modify_mask & IB_PORT_SHUTDOWN)
- ipath_set_linkstate(dev->dd, IPATH_IB_LINKDOWN);
- if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR)
- dev->qkey_violations = 0;
- return 0;
-}
-
-static int ipath_query_gid(struct ib_device *ibdev, u8 port,
- int index, union ib_gid *gid)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- if (index >= 1) {
- ret = -EINVAL;
- goto bail;
- }
- gid->global.subnet_prefix = dev->gid_prefix;
- gid->global.interface_id = dev->dd->ipath_guid;
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-static struct ib_pd *ipath_alloc_pd(struct ib_device *ibdev,
- struct ib_ucontext *context,
- struct ib_udata *udata)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- struct ipath_pd *pd;
- struct ib_pd *ret;
-
- /*
- * This is actually totally arbitrary. Some correctness tests
- * assume there's a maximum number of PDs that can be allocated.
- * We don't actually have this limit, but we fail the test if
- * we allow allocations of more than we report for this value.
- */
-
- pd = kmalloc(sizeof *pd, GFP_KERNEL);
- if (!pd) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- spin_lock(&dev->n_pds_lock);
- if (dev->n_pds_allocated == ib_ipath_max_pds) {
- spin_unlock(&dev->n_pds_lock);
- kfree(pd);
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- dev->n_pds_allocated++;
- spin_unlock(&dev->n_pds_lock);
-
- /* ib_alloc_pd() will initialize pd->ibpd. */
- pd->user = udata != NULL;
-
- ret = &pd->ibpd;
-
-bail:
- return ret;
-}
-
-static int ipath_dealloc_pd(struct ib_pd *ibpd)
-{
- struct ipath_pd *pd = to_ipd(ibpd);
- struct ipath_ibdev *dev = to_idev(ibpd->device);
-
- spin_lock(&dev->n_pds_lock);
- dev->n_pds_allocated--;
- spin_unlock(&dev->n_pds_lock);
-
- kfree(pd);
-
- return 0;
-}
-
-/**
- * ipath_create_ah - create an address handle
- * @pd: the protection domain
- * @ah_attr: the attributes of the AH
- *
- * This may be called from interrupt context.
- */
-static struct ib_ah *ipath_create_ah(struct ib_pd *pd,
- struct ib_ah_attr *ah_attr)
-{
- struct ipath_ah *ah;
- struct ib_ah *ret;
- struct ipath_ibdev *dev = to_idev(pd->device);
- unsigned long flags;
-
- /* A multicast address requires a GRH (see ch. 8.4.1). */
- if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
- ah_attr->dlid != IPATH_PERMISSIVE_LID &&
- !(ah_attr->ah_flags & IB_AH_GRH)) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (ah_attr->dlid == 0) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- if (ah_attr->port_num < 1 ||
- ah_attr->port_num > pd->device->phys_port_cnt) {
- ret = ERR_PTR(-EINVAL);
- goto bail;
- }
-
- ah = kmalloc(sizeof *ah, GFP_ATOMIC);
- if (!ah) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- spin_lock_irqsave(&dev->n_ahs_lock, flags);
- if (dev->n_ahs_allocated == ib_ipath_max_ahs) {
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
- kfree(ah);
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- dev->n_ahs_allocated++;
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
-
- /* ib_create_ah() will initialize ah->ibah. */
- ah->attr = *ah_attr;
- ah->attr.static_rate = ipath_ib_rate_to_mult(ah_attr->static_rate);
-
- ret = &ah->ibah;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_destroy_ah - destroy an address handle
- * @ibah: the AH to destroy
- *
- * This may be called from interrupt context.
- */
-static int ipath_destroy_ah(struct ib_ah *ibah)
-{
- struct ipath_ibdev *dev = to_idev(ibah->device);
- struct ipath_ah *ah = to_iah(ibah);
- unsigned long flags;
-
- spin_lock_irqsave(&dev->n_ahs_lock, flags);
- dev->n_ahs_allocated--;
- spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
-
- kfree(ah);
-
- return 0;
-}
-
-static int ipath_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr)
-{
- struct ipath_ah *ah = to_iah(ibah);
-
- *ah_attr = ah->attr;
- ah_attr->static_rate = ipath_mult_to_ib_rate(ah->attr.static_rate);
-
- return 0;
-}
-
-/**
- * ipath_get_npkeys - return the size of the PKEY table for port 0
- * @dd: the infinipath device
- */
-unsigned ipath_get_npkeys(struct ipath_devdata *dd)
-{
- return ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys);
-}
-
-/**
- * ipath_get_pkey - return the indexed PKEY from the port PKEY table
- * @dd: the infinipath device
- * @index: the PKEY index
- */
-unsigned ipath_get_pkey(struct ipath_devdata *dd, unsigned index)
-{
- unsigned ret;
-
- /* always a kernel port, no locking needed */
- if (index >= ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys))
- ret = 0;
- else
- ret = dd->ipath_pd[0]->port_pkeys[index];
-
- return ret;
-}
-
-static int ipath_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
- u16 *pkey)
-{
- struct ipath_ibdev *dev = to_idev(ibdev);
- int ret;
-
- if (index >= ipath_get_npkeys(dev->dd)) {
- ret = -EINVAL;
- goto bail;
- }
-
- *pkey = ipath_get_pkey(dev->dd, index);
- ret = 0;
-
-bail:
- return ret;
-}
-
-/**
- * ipath_alloc_ucontext - allocate a ucontest
- * @ibdev: the infiniband device
- * @udata: not used by the InfiniPath driver
- */
-
-static struct ib_ucontext *ipath_alloc_ucontext(struct ib_device *ibdev,
- struct ib_udata *udata)
-{
- struct ipath_ucontext *context;
- struct ib_ucontext *ret;
-
- context = kmalloc(sizeof *context, GFP_KERNEL);
- if (!context) {
- ret = ERR_PTR(-ENOMEM);
- goto bail;
- }
-
- ret = &context->ibucontext;
-
-bail:
- return ret;
-}
-
-static int ipath_dealloc_ucontext(struct ib_ucontext *context)
-{
- kfree(to_iucontext(context));
- return 0;
-}
-
-static int ipath_verbs_register_sysfs(struct ib_device *dev);
-
-static void __verbs_timer(unsigned long arg)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *) arg;
-
- /* Handle verbs layer timeouts. */
- ipath_ib_timer(dd->verbs_dev);
-
- mod_timer(&dd->verbs_timer, jiffies + 1);
-}
-
-static int enable_timer(struct ipath_devdata *dd)
-{
- /*
- * Early chips had a design flaw where the chip and kernel idea
- * of the tail register don't always agree, and therefore we won't
- * get an interrupt on the next packet received.
- * If the board supports per packet receive interrupts, use it.
- * Otherwise, the timer function periodically checks for packets
- * to cover this case.
- * Either way, the timer is needed for verbs layer related
- * processing.
- */
- if (dd->ipath_flags & IPATH_GPIO_INTR) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_debugportselect,
- 0x2074076542310ULL);
- /* Enable GPIO bit 2 interrupt */
- dd->ipath_gpio_mask |= (u64) (1 << IPATH_GPIO_PORT0_BIT);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
-
- init_timer(&dd->verbs_timer);
- dd->verbs_timer.function = __verbs_timer;
- dd->verbs_timer.data = (unsigned long)dd;
- dd->verbs_timer.expires = jiffies + 1;
- add_timer(&dd->verbs_timer);
-
- return 0;
-}
-
-static int disable_timer(struct ipath_devdata *dd)
-{
- /* Disable GPIO bit 2 interrupt */
- if (dd->ipath_flags & IPATH_GPIO_INTR) {
- /* Disable GPIO bit 2 interrupt */
- dd->ipath_gpio_mask &= ~((u64) (1 << IPATH_GPIO_PORT0_BIT));
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- /*
- * We might want to undo changes to debugportselect,
- * but how?
- */
- }
-
- del_timer_sync(&dd->verbs_timer);
-
- return 0;
-}
-
-static int ipath_port_immutable(struct ib_device *ibdev, u8 port_num,
- struct ib_port_immutable *immutable)
-{
- struct ib_port_attr attr;
- int err;
-
- err = ipath_query_port(ibdev, port_num, &attr);
- if (err)
- return err;
-
- immutable->pkey_tbl_len = attr.pkey_tbl_len;
- immutable->gid_tbl_len = attr.gid_tbl_len;
- immutable->core_cap_flags = RDMA_CORE_PORT_IBA_IB;
- immutable->max_mad_size = IB_MGMT_MAD_SIZE;
-
- return 0;
-}
-
-/**
- * ipath_register_ib_device - register our device with the infiniband core
- * @dd: the device data structure
- * Return the allocated ipath_ibdev pointer or NULL on error.
- */
-int ipath_register_ib_device(struct ipath_devdata *dd)
-{
- struct ipath_verbs_counters cntrs;
- struct ipath_ibdev *idev;
- struct ib_device *dev;
- struct ipath_verbs_txreq *tx;
- unsigned i;
- int ret;
-
- idev = (struct ipath_ibdev *)ib_alloc_device(sizeof *idev);
- if (idev == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
-
- dev = &idev->ibdev;
-
- if (dd->ipath_sdma_descq_cnt) {
- tx = kmalloc(dd->ipath_sdma_descq_cnt * sizeof *tx,
- GFP_KERNEL);
- if (tx == NULL) {
- ret = -ENOMEM;
- goto err_tx;
- }
- } else
- tx = NULL;
- idev->txreq_bufs = tx;
-
- /* Only need to initialize non-zero fields. */
- spin_lock_init(&idev->n_pds_lock);
- spin_lock_init(&idev->n_ahs_lock);
- spin_lock_init(&idev->n_cqs_lock);
- spin_lock_init(&idev->n_qps_lock);
- spin_lock_init(&idev->n_srqs_lock);
- spin_lock_init(&idev->n_mcast_grps_lock);
-
- spin_lock_init(&idev->qp_table.lock);
- spin_lock_init(&idev->lk_table.lock);
- idev->sm_lid = be16_to_cpu(IB_LID_PERMISSIVE);
- /* Set the prefix to the default value (see ch. 4.1.1) */
- idev->gid_prefix = cpu_to_be64(0xfe80000000000000ULL);
-
- ret = ipath_init_qp_table(idev, ib_ipath_qp_table_size);
- if (ret)
- goto err_qp;
-
- /*
- * The top ib_ipath_lkey_table_size bits are used to index the
- * table. The lower 8 bits can be owned by the user (copied from
- * the LKEY). The remaining bits act as a generation number or tag.
- */
- idev->lk_table.max = 1 << ib_ipath_lkey_table_size;
- idev->lk_table.table = kzalloc(idev->lk_table.max *
- sizeof(*idev->lk_table.table),
- GFP_KERNEL);
- if (idev->lk_table.table == NULL) {
- ret = -ENOMEM;
- goto err_lk;
- }
- INIT_LIST_HEAD(&idev->pending_mmaps);
- spin_lock_init(&idev->pending_lock);
- idev->mmap_offset = PAGE_SIZE;
- spin_lock_init(&idev->mmap_offset_lock);
- INIT_LIST_HEAD(&idev->pending[0]);
- INIT_LIST_HEAD(&idev->pending[1]);
- INIT_LIST_HEAD(&idev->pending[2]);
- INIT_LIST_HEAD(&idev->piowait);
- INIT_LIST_HEAD(&idev->rnrwait);
- INIT_LIST_HEAD(&idev->txreq_free);
- idev->pending_index = 0;
- idev->port_cap_flags =
- IB_PORT_SYS_IMAGE_GUID_SUP | IB_PORT_CLIENT_REG_SUP;
- if (dd->ipath_flags & IPATH_HAS_LINK_LATENCY)
- idev->port_cap_flags |= IB_PORT_LINK_LATENCY_SUP;
- idev->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA;
- idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA;
- idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS;
- idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS;
- idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT;
-
- /* Snapshot current HW counters to "clear" them. */
- ipath_get_counters(dd, &cntrs);
- idev->z_symbol_error_counter = cntrs.symbol_error_counter;
- idev->z_link_error_recovery_counter =
- cntrs.link_error_recovery_counter;
- idev->z_link_downed_counter = cntrs.link_downed_counter;
- idev->z_port_rcv_errors = cntrs.port_rcv_errors;
- idev->z_port_rcv_remphys_errors =
- cntrs.port_rcv_remphys_errors;
- idev->z_port_xmit_discards = cntrs.port_xmit_discards;
- idev->z_port_xmit_data = cntrs.port_xmit_data;
- idev->z_port_rcv_data = cntrs.port_rcv_data;
- idev->z_port_xmit_packets = cntrs.port_xmit_packets;
- idev->z_port_rcv_packets = cntrs.port_rcv_packets;
- idev->z_local_link_integrity_errors =
- cntrs.local_link_integrity_errors;
- idev->z_excessive_buffer_overrun_errors =
- cntrs.excessive_buffer_overrun_errors;
- idev->z_vl15_dropped = cntrs.vl15_dropped;
-
- for (i = 0; i < dd->ipath_sdma_descq_cnt; i++, tx++)
- list_add(&tx->txreq.list, &idev->txreq_free);
-
- /*
- * The system image GUID is supposed to be the same for all
- * IB HCAs in a single system but since there can be other
- * device types in the system, we can't be sure this is unique.
- */
- if (!sys_image_guid)
- sys_image_guid = dd->ipath_guid;
- idev->sys_image_guid = sys_image_guid;
- idev->ib_unit = dd->ipath_unit;
- idev->dd = dd;
-
- strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
- dev->owner = THIS_MODULE;
- dev->node_guid = dd->ipath_guid;
- dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
- dev->uverbs_cmd_mask =
- (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
- (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
- (1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
- (1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
- (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
- (1ull << IB_USER_VERBS_CMD_CREATE_AH) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_AH) |
- (1ull << IB_USER_VERBS_CMD_QUERY_AH) |
- (1ull << IB_USER_VERBS_CMD_REG_MR) |
- (1ull << IB_USER_VERBS_CMD_DEREG_MR) |
- (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
- (1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
- (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
- (1ull << IB_USER_VERBS_CMD_POLL_CQ) |
- (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) |
- (1ull << IB_USER_VERBS_CMD_CREATE_QP) |
- (1ull << IB_USER_VERBS_CMD_QUERY_QP) |
- (1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
- (1ull << IB_USER_VERBS_CMD_POST_SEND) |
- (1ull << IB_USER_VERBS_CMD_POST_RECV) |
- (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
- (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_POST_SRQ_RECV);
- dev->node_type = RDMA_NODE_IB_CA;
- dev->phys_port_cnt = 1;
- dev->num_comp_vectors = 1;
- dev->dma_device = &dd->pcidev->dev;
- dev->query_device = ipath_query_device;
- dev->modify_device = ipath_modify_device;
- dev->query_port = ipath_query_port;
- dev->modify_port = ipath_modify_port;
- dev->query_pkey = ipath_query_pkey;
- dev->query_gid = ipath_query_gid;
- dev->alloc_ucontext = ipath_alloc_ucontext;
- dev->dealloc_ucontext = ipath_dealloc_ucontext;
- dev->alloc_pd = ipath_alloc_pd;
- dev->dealloc_pd = ipath_dealloc_pd;
- dev->create_ah = ipath_create_ah;
- dev->destroy_ah = ipath_destroy_ah;
- dev->query_ah = ipath_query_ah;
- dev->create_srq = ipath_create_srq;
- dev->modify_srq = ipath_modify_srq;
- dev->query_srq = ipath_query_srq;
- dev->destroy_srq = ipath_destroy_srq;
- dev->create_qp = ipath_create_qp;
- dev->modify_qp = ipath_modify_qp;
- dev->query_qp = ipath_query_qp;
- dev->destroy_qp = ipath_destroy_qp;
- dev->post_send = ipath_post_send;
- dev->post_recv = ipath_post_receive;
- dev->post_srq_recv = ipath_post_srq_receive;
- dev->create_cq = ipath_create_cq;
- dev->destroy_cq = ipath_destroy_cq;
- dev->resize_cq = ipath_resize_cq;
- dev->poll_cq = ipath_poll_cq;
- dev->req_notify_cq = ipath_req_notify_cq;
- dev->get_dma_mr = ipath_get_dma_mr;
- dev->reg_phys_mr = ipath_reg_phys_mr;
- dev->reg_user_mr = ipath_reg_user_mr;
- dev->dereg_mr = ipath_dereg_mr;
- dev->alloc_fmr = ipath_alloc_fmr;
- dev->map_phys_fmr = ipath_map_phys_fmr;
- dev->unmap_fmr = ipath_unmap_fmr;
- dev->dealloc_fmr = ipath_dealloc_fmr;
- dev->attach_mcast = ipath_multicast_attach;
- dev->detach_mcast = ipath_multicast_detach;
- dev->process_mad = ipath_process_mad;
- dev->mmap = ipath_mmap;
- dev->dma_ops = &ipath_dma_mapping_ops;
- dev->get_port_immutable = ipath_port_immutable;
-
- snprintf(dev->node_desc, sizeof(dev->node_desc),
- IPATH_IDSTR " %s", init_utsname()->nodename);
-
- ret = ib_register_device(dev, NULL);
- if (ret)
- goto err_reg;
-
- ret = ipath_verbs_register_sysfs(dev);
- if (ret)
- goto err_class;
-
- enable_timer(dd);
-
- goto bail;
-
-err_class:
- ib_unregister_device(dev);
-err_reg:
- kfree(idev->lk_table.table);
-err_lk:
- kfree(idev->qp_table.table);
-err_qp:
- kfree(idev->txreq_bufs);
-err_tx:
- ib_dealloc_device(dev);
- ipath_dev_err(dd, "cannot register verbs: %d!\n", -ret);
- idev = NULL;
-
-bail:
- dd->verbs_dev = idev;
- return ret;
-}
-
-void ipath_unregister_ib_device(struct ipath_ibdev *dev)
-{
- struct ib_device *ibdev = &dev->ibdev;
- u32 qps_inuse;
-
- ib_unregister_device(ibdev);
-
- disable_timer(dev->dd);
-
- if (!list_empty(&dev->pending[0]) ||
- !list_empty(&dev->pending[1]) ||
- !list_empty(&dev->pending[2]))
- ipath_dev_err(dev->dd, "pending list not empty!\n");
- if (!list_empty(&dev->piowait))
- ipath_dev_err(dev->dd, "piowait list not empty!\n");
- if (!list_empty(&dev->rnrwait))
- ipath_dev_err(dev->dd, "rnrwait list not empty!\n");
- if (!ipath_mcast_tree_empty())
- ipath_dev_err(dev->dd, "multicast table memory leak!\n");
- /*
- * Note that ipath_unregister_ib_device() can be called before all
- * the QPs are destroyed!
- */
- qps_inuse = ipath_free_all_qps(&dev->qp_table);
- if (qps_inuse)
- ipath_dev_err(dev->dd, "QP memory leak! %u still in use\n",
- qps_inuse);
- kfree(dev->qp_table.table);
- kfree(dev->lk_table.table);
- kfree(dev->txreq_bufs);
- ib_dealloc_device(ibdev);
-}
-
-static ssize_t show_rev(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
-
- return sprintf(buf, "%x\n", dev->dd->ipath_pcirev);
-}
-
-static ssize_t show_hca(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
- int ret;
-
- ret = dev->dd->ipath_f_get_boardname(dev->dd, buf, 128);
- if (ret < 0)
- goto bail;
- strcat(buf, "\n");
- ret = strlen(buf);
-
-bail:
- return ret;
-}
-
-static ssize_t show_stats(struct device *device, struct device_attribute *attr,
- char *buf)
-{
- struct ipath_ibdev *dev =
- container_of(device, struct ipath_ibdev, ibdev.dev);
- int i;
- int len;
-
- len = sprintf(buf,
- "RC resends %d\n"
- "RC no QACK %d\n"
- "RC ACKs %d\n"
- "RC SEQ NAKs %d\n"
- "RC RDMA seq %d\n"
- "RC RNR NAKs %d\n"
- "RC OTH NAKs %d\n"
- "RC timeouts %d\n"
- "RC RDMA dup %d\n"
- "piobuf wait %d\n"
- "unaligned %d\n"
- "PKT drops %d\n"
- "WQE errs %d\n",
- dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
- dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
- dev->n_other_naks, dev->n_timeouts,
- dev->n_rdma_dup_busy, dev->n_piowait, dev->n_unaligned,
- dev->n_pkt_drops, dev->n_wqe_errs);
- for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
- const struct ipath_opcode_stats *si = &dev->opstats[i];
-
- if (!si->n_packets && !si->n_bytes)
- continue;
- len += sprintf(buf + len, "%02x %llu/%llu\n", i,
- (unsigned long long) si->n_packets,
- (unsigned long long) si->n_bytes);
- }
- return len;
-}
-
-static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
-static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
-static DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL);
-static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
-
-static struct device_attribute *ipath_class_attributes[] = {
- &dev_attr_hw_rev,
- &dev_attr_hca_type,
- &dev_attr_board_id,
- &dev_attr_stats
-};
-
-static int ipath_verbs_register_sysfs(struct ib_device *dev)
-{
- int i;
- int ret;
-
- for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i) {
- ret = device_create_file(&dev->dev,
- ipath_class_attributes[i]);
- if (ret)
- goto bail;
- }
- return 0;
-bail:
- for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
- device_remove_file(&dev->dev, ipath_class_attributes[i]);
- return ret;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef IPATH_VERBS_H
-#define IPATH_VERBS_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/kref.h>
-#include <rdma/ib_pack.h>
-#include <rdma/ib_user_verbs.h>
-
-#include "ipath_kernel.h"
-
-#define IPATH_MAX_RDMA_ATOMIC 4
-
-#define QPN_MAX (1 << 24)
-#define QPNMAP_ENTRIES (QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
-
-/*
- * Increment this value if any changes that break userspace ABI
- * compatibility are made.
- */
-#define IPATH_UVERBS_ABI_VERSION 2
-
-/*
- * Define an ib_cq_notify value that is not valid so we know when CQ
- * notifications are armed.
- */
-#define IB_CQ_NONE (IB_CQ_NEXT_COMP + 1)
-
-/* AETH NAK opcode values */
-#define IB_RNR_NAK 0x20
-#define IB_NAK_PSN_ERROR 0x60
-#define IB_NAK_INVALID_REQUEST 0x61
-#define IB_NAK_REMOTE_ACCESS_ERROR 0x62
-#define IB_NAK_REMOTE_OPERATIONAL_ERROR 0x63
-#define IB_NAK_INVALID_RD_REQUEST 0x64
-
-/* Flags for checking QP state (see ib_ipath_state_ops[]) */
-#define IPATH_POST_SEND_OK 0x01
-#define IPATH_POST_RECV_OK 0x02
-#define IPATH_PROCESS_RECV_OK 0x04
-#define IPATH_PROCESS_SEND_OK 0x08
-#define IPATH_PROCESS_NEXT_SEND_OK 0x10
-#define IPATH_FLUSH_SEND 0x20
-#define IPATH_FLUSH_RECV 0x40
-#define IPATH_PROCESS_OR_FLUSH_SEND \
- (IPATH_PROCESS_SEND_OK | IPATH_FLUSH_SEND)
-
-/* IB Performance Manager status values */
-#define IB_PMA_SAMPLE_STATUS_DONE 0x00
-#define IB_PMA_SAMPLE_STATUS_STARTED 0x01
-#define IB_PMA_SAMPLE_STATUS_RUNNING 0x02
-
-/* Mandatory IB performance counter select values. */
-#define IB_PMA_PORT_XMIT_DATA cpu_to_be16(0x0001)
-#define IB_PMA_PORT_RCV_DATA cpu_to_be16(0x0002)
-#define IB_PMA_PORT_XMIT_PKTS cpu_to_be16(0x0003)
-#define IB_PMA_PORT_RCV_PKTS cpu_to_be16(0x0004)
-#define IB_PMA_PORT_XMIT_WAIT cpu_to_be16(0x0005)
-
-struct ib_reth {
- __be64 vaddr;
- __be32 rkey;
- __be32 length;
-} __attribute__ ((packed));
-
-struct ib_atomic_eth {
- __be32 vaddr[2]; /* unaligned so access as 2 32-bit words */
- __be32 rkey;
- __be64 swap_data;
- __be64 compare_data;
-} __attribute__ ((packed));
-
-struct ipath_other_headers {
- __be32 bth[3];
- union {
- struct {
- __be32 deth[2];
- __be32 imm_data;
- } ud;
- struct {
- struct ib_reth reth;
- __be32 imm_data;
- } rc;
- struct {
- __be32 aeth;
- __be32 atomic_ack_eth[2];
- } at;
- __be32 imm_data;
- __be32 aeth;
- struct ib_atomic_eth atomic_eth;
- } u;
-} __attribute__ ((packed));
-
-/*
- * Note that UD packets with a GRH header are 8+40+12+8 = 68 bytes
- * long (72 w/ imm_data). Only the first 56 bytes of the IB header
- * will be in the eager header buffer. The remaining 12 or 16 bytes
- * are in the data buffer.
- */
-struct ipath_ib_header {
- __be16 lrh[4];
- union {
- struct {
- struct ib_grh grh;
- struct ipath_other_headers oth;
- } l;
- struct ipath_other_headers oth;
- } u;
-} __attribute__ ((packed));
-
-struct ipath_pio_header {
- __le32 pbc[2];
- struct ipath_ib_header hdr;
-} __attribute__ ((packed));
-
-/*
- * There is one struct ipath_mcast for each multicast GID.
- * All attached QPs are then stored as a list of
- * struct ipath_mcast_qp.
- */
-struct ipath_mcast_qp {
- struct list_head list;
- struct ipath_qp *qp;
-};
-
-struct ipath_mcast {
- struct rb_node rb_node;
- union ib_gid mgid;
- struct list_head qp_list;
- wait_queue_head_t wait;
- atomic_t refcount;
- int n_attached;
-};
-
-/* Protection domain */
-struct ipath_pd {
- struct ib_pd ibpd;
- int user; /* non-zero if created from user space */
-};
-
-/* Address Handle */
-struct ipath_ah {
- struct ib_ah ibah;
- struct ib_ah_attr attr;
-};
-
-/*
- * This structure is used by ipath_mmap() to validate an offset
- * when an mmap() request is made. The vm_area_struct then uses
- * this as its vm_private_data.
- */
-struct ipath_mmap_info {
- struct list_head pending_mmaps;
- struct ib_ucontext *context;
- void *obj;
- __u64 offset;
- struct kref ref;
- unsigned size;
-};
-
-/*
- * This structure is used to contain the head pointer, tail pointer,
- * and completion queue entries as a single memory allocation so
- * it can be mmap'ed into user space.
- */
-struct ipath_cq_wc {
- u32 head; /* index of next entry to fill */
- u32 tail; /* index of next ib_poll_cq() entry */
- union {
- /* these are actually size ibcq.cqe + 1 */
- struct ib_uverbs_wc uqueue[0];
- struct ib_wc kqueue[0];
- };
-};
-
-/*
- * The completion queue structure.
- */
-struct ipath_cq {
- struct ib_cq ibcq;
- struct tasklet_struct comptask;
- spinlock_t lock;
- u8 notify;
- u8 triggered;
- struct ipath_cq_wc *queue;
- struct ipath_mmap_info *ip;
-};
-
-/*
- * A segment is a linear region of low physical memory.
- * XXX Maybe we should use phys addr here and kmap()/kunmap().
- * Used by the verbs layer.
- */
-struct ipath_seg {
- void *vaddr;
- size_t length;
-};
-
-/* The number of ipath_segs that fit in a page. */
-#define IPATH_SEGSZ (PAGE_SIZE / sizeof (struct ipath_seg))
-
-struct ipath_segarray {
- struct ipath_seg segs[IPATH_SEGSZ];
-};
-
-struct ipath_mregion {
- struct ib_pd *pd; /* shares refcnt of ibmr.pd */
- u64 user_base; /* User's address for this region */
- u64 iova; /* IB start address of this region */
- size_t length;
- u32 lkey;
- u32 offset; /* offset (bytes) to start of region */
- int access_flags;
- u32 max_segs; /* number of ipath_segs in all the arrays */
- u32 mapsz; /* size of the map array */
- struct ipath_segarray *map[0]; /* the segments */
-};
-
-/*
- * These keep track of the copy progress within a memory region.
- * Used by the verbs layer.
- */
-struct ipath_sge {
- struct ipath_mregion *mr;
- void *vaddr; /* kernel virtual address of segment */
- u32 sge_length; /* length of the SGE */
- u32 length; /* remaining length of the segment */
- u16 m; /* current index: mr->map[m] */
- u16 n; /* current index: mr->map[m]->segs[n] */
-};
-
-/* Memory region */
-struct ipath_mr {
- struct ib_mr ibmr;
- struct ib_umem *umem;
- struct ipath_mregion mr; /* must be last */
-};
-
-/*
- * Send work request queue entry.
- * The size of the sg_list is determined when the QP is created and stored
- * in qp->s_max_sge.
- */
-struct ipath_swqe {
- struct ib_send_wr wr; /* don't use wr.sg_list */
- u32 psn; /* first packet sequence number */
- u32 lpsn; /* last packet sequence number */
- u32 ssn; /* send sequence number */
- u32 length; /* total length of data in sg_list */
- struct ipath_sge sg_list[0];
-};
-
-/*
- * Receive work request queue entry.
- * The size of the sg_list is determined when the QP (or SRQ) is created
- * and stored in qp->r_rq.max_sge (or srq->rq.max_sge).
- */
-struct ipath_rwqe {
- u64 wr_id;
- u8 num_sge;
- struct ib_sge sg_list[0];
-};
-
-/*
- * This structure is used to contain the head pointer, tail pointer,
- * and receive work queue entries as a single memory allocation so
- * it can be mmap'ed into user space.
- * Note that the wq array elements are variable size so you can't
- * just index into the array to get the N'th element;
- * use get_rwqe_ptr() instead.
- */
-struct ipath_rwq {
- u32 head; /* new work requests posted to the head */
- u32 tail; /* receives pull requests from here. */
- struct ipath_rwqe wq[0];
-};
-
-struct ipath_rq {
- struct ipath_rwq *wq;
- spinlock_t lock;
- u32 size; /* size of RWQE array */
- u8 max_sge;
-};
-
-struct ipath_srq {
- struct ib_srq ibsrq;
- struct ipath_rq rq;
- struct ipath_mmap_info *ip;
- /* send signal when number of RWQEs < limit */
- u32 limit;
-};
-
-struct ipath_sge_state {
- struct ipath_sge *sg_list; /* next SGE to be used if any */
- struct ipath_sge sge; /* progress state for the current SGE */
- u8 num_sge;
- u8 static_rate;
-};
-
-/*
- * This structure holds the information that the send tasklet needs
- * to send a RDMA read response or atomic operation.
- */
-struct ipath_ack_entry {
- u8 opcode;
- u8 sent;
- u32 psn;
- union {
- struct ipath_sge_state rdma_sge;
- u64 atomic_data;
- };
-};
-
-/*
- * Variables prefixed with s_ are for the requester (sender).
- * Variables prefixed with r_ are for the responder (receiver).
- * Variables prefixed with ack_ are for responder replies.
- *
- * Common variables are protected by both r_rq.lock and s_lock in that order
- * which only happens in modify_qp() or changing the QP 'state'.
- */
-struct ipath_qp {
- struct ib_qp ibqp;
- struct ipath_qp *next; /* link list for QPN hash table */
- struct ipath_qp *timer_next; /* link list for ipath_ib_timer() */
- struct ipath_qp *pio_next; /* link for ipath_ib_piobufavail() */
- struct list_head piowait; /* link for wait PIO buf */
- struct list_head timerwait; /* link for waiting for timeouts */
- struct ib_ah_attr remote_ah_attr;
- struct ipath_ib_header s_hdr; /* next packet header to send */
- atomic_t refcount;
- wait_queue_head_t wait;
- wait_queue_head_t wait_dma;
- struct tasklet_struct s_task;
- struct ipath_mmap_info *ip;
- struct ipath_sge_state *s_cur_sge;
- struct ipath_verbs_txreq *s_tx;
- struct ipath_sge_state s_sge; /* current send request data */
- struct ipath_ack_entry s_ack_queue[IPATH_MAX_RDMA_ATOMIC + 1];
- struct ipath_sge_state s_ack_rdma_sge;
- struct ipath_sge_state s_rdma_read_sge;
- struct ipath_sge_state r_sge; /* current receive data */
- spinlock_t s_lock;
- atomic_t s_dma_busy;
- u16 s_pkt_delay;
- u16 s_hdrwords; /* size of s_hdr in 32 bit words */
- u32 s_cur_size; /* size of send packet in bytes */
- u32 s_len; /* total length of s_sge */
- u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
- u32 s_next_psn; /* PSN for next request */
- u32 s_last_psn; /* last response PSN processed */
- u32 s_psn; /* current packet sequence number */
- u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
- u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
- u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */
- u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
- u64 r_wr_id; /* ID for current receive WQE */
- unsigned long r_aflags;
- u32 r_len; /* total length of r_sge */
- u32 r_rcv_len; /* receive data len processed */
- u32 r_psn; /* expected rcv packet sequence number */
- u32 r_msn; /* message sequence number */
- u8 state; /* QP state */
- u8 s_state; /* opcode of last packet sent */
- u8 s_ack_state; /* opcode of packet to ACK */
- u8 s_nak_state; /* non-zero if NAK is pending */
- u8 r_state; /* opcode of last packet received */
- u8 r_nak_state; /* non-zero if NAK is pending */
- u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
- u8 r_flags;
- u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
- u8 r_head_ack_queue; /* index into s_ack_queue[] */
- u8 qp_access_flags;
- u8 s_max_sge; /* size of s_wq->sg_list */
- u8 s_retry_cnt; /* number of times to retry */
- u8 s_rnr_retry_cnt;
- u8 s_retry; /* requester retry counter */
- u8 s_rnr_retry; /* requester RNR retry counter */
- u8 s_pkey_index; /* PKEY index to use */
- u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
- u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
- u8 s_tail_ack_queue; /* index into s_ack_queue[] */
- u8 s_flags;
- u8 s_dmult;
- u8 s_draining;
- u8 timeout; /* Timeout for this QP */
- enum ib_mtu path_mtu;
- u32 remote_qpn;
- u32 qkey; /* QKEY for this QP (for UD or RD) */
- u32 s_size; /* send work queue size */
- u32 s_head; /* new entries added here */
- u32 s_tail; /* next entry to process */
- u32 s_cur; /* current work queue entry */
- u32 s_last; /* last un-ACK'ed entry */
- u32 s_ssn; /* SSN of tail entry */
- u32 s_lsn; /* limit sequence number (credit) */
- struct ipath_swqe *s_wq; /* send work queue */
- struct ipath_swqe *s_wqe;
- struct ipath_sge *r_ud_sg_list;
- struct ipath_rq r_rq; /* receive work queue */
- struct ipath_sge r_sg_list[0]; /* verified SGEs */
-};
-
-/*
- * Atomic bit definitions for r_aflags.
- */
-#define IPATH_R_WRID_VALID 0
-
-/*
- * Bit definitions for r_flags.
- */
-#define IPATH_R_REUSE_SGE 0x01
-#define IPATH_R_RDMAR_SEQ 0x02
-
-/*
- * Bit definitions for s_flags.
- *
- * IPATH_S_FENCE_PENDING - waiting for all prior RDMA read or atomic SWQEs
- * before processing the next SWQE
- * IPATH_S_RDMAR_PENDING - waiting for any RDMA read or atomic SWQEs
- * before processing the next SWQE
- * IPATH_S_WAITING - waiting for RNR timeout or send buffer available.
- * IPATH_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
- * IPATH_S_WAIT_DMA - waiting for send DMA queue to drain before generating
- * next send completion entry not via send DMA.
- */
-#define IPATH_S_SIGNAL_REQ_WR 0x01
-#define IPATH_S_FENCE_PENDING 0x02
-#define IPATH_S_RDMAR_PENDING 0x04
-#define IPATH_S_ACK_PENDING 0x08
-#define IPATH_S_BUSY 0x10
-#define IPATH_S_WAITING 0x20
-#define IPATH_S_WAIT_SSN_CREDIT 0x40
-#define IPATH_S_WAIT_DMA 0x80
-
-#define IPATH_S_ANY_WAIT (IPATH_S_FENCE_PENDING | IPATH_S_RDMAR_PENDING | \
- IPATH_S_WAITING | IPATH_S_WAIT_SSN_CREDIT | IPATH_S_WAIT_DMA)
-
-#define IPATH_PSN_CREDIT 512
-
-/*
- * Since struct ipath_swqe is not a fixed size, we can't simply index into
- * struct ipath_qp.s_wq. This function does the array index computation.
- */
-static inline struct ipath_swqe *get_swqe_ptr(struct ipath_qp *qp,
- unsigned n)
-{
- return (struct ipath_swqe *)((char *)qp->s_wq +
- (sizeof(struct ipath_swqe) +
- qp->s_max_sge *
- sizeof(struct ipath_sge)) * n);
-}
-
-/*
- * Since struct ipath_rwqe is not a fixed size, we can't simply index into
- * struct ipath_rwq.wq. This function does the array index computation.
- */
-static inline struct ipath_rwqe *get_rwqe_ptr(struct ipath_rq *rq,
- unsigned n)
-{
- return (struct ipath_rwqe *)
- ((char *) rq->wq->wq +
- (sizeof(struct ipath_rwqe) +
- rq->max_sge * sizeof(struct ib_sge)) * n);
-}
-
-/*
- * QPN-map pages start out as NULL, they get allocated upon
- * first use and are never deallocated. This way,
- * large bitmaps are not allocated unless large numbers of QPs are used.
- */
-struct qpn_map {
- atomic_t n_free;
- void *page;
-};
-
-struct ipath_qp_table {
- spinlock_t lock;
- u32 last; /* last QP number allocated */
- u32 max; /* size of the hash table */
- u32 nmaps; /* size of the map table */
- struct ipath_qp **table;
- /* bit map of free numbers */
- struct qpn_map map[QPNMAP_ENTRIES];
-};
-
-struct ipath_lkey_table {
- spinlock_t lock;
- u32 next; /* next unused index (speeds search) */
- u32 gen; /* generation count */
- u32 max; /* size of the table */
- struct ipath_mregion **table;
-};
-
-struct ipath_opcode_stats {
- u64 n_packets; /* number of packets */
- u64 n_bytes; /* total number of bytes */
-};
-
-struct ipath_ibdev {
- struct ib_device ibdev;
- struct ipath_devdata *dd;
- struct list_head pending_mmaps;
- spinlock_t mmap_offset_lock;
- u32 mmap_offset;
- int ib_unit; /* This is the device number */
- u16 sm_lid; /* in host order */
- u8 sm_sl;
- u8 mkeyprot;
- /* non-zero when timer is set */
- unsigned long mkey_lease_timeout;
-
- /* The following fields are really per port. */
- struct ipath_qp_table qp_table;
- struct ipath_lkey_table lk_table;
- struct list_head pending[3]; /* FIFO of QPs waiting for ACKs */
- struct list_head piowait; /* list for wait PIO buf */
- struct list_head txreq_free;
- void *txreq_bufs;
- /* list of QPs waiting for RNR timer */
- struct list_head rnrwait;
- spinlock_t pending_lock;
- __be64 sys_image_guid; /* in network order */
- __be64 gid_prefix; /* in network order */
- __be64 mkey;
-
- u32 n_pds_allocated; /* number of PDs allocated for device */
- spinlock_t n_pds_lock;
- u32 n_ahs_allocated; /* number of AHs allocated for device */
- spinlock_t n_ahs_lock;
- u32 n_cqs_allocated; /* number of CQs allocated for device */
- spinlock_t n_cqs_lock;
- u32 n_qps_allocated; /* number of QPs allocated for device */
- spinlock_t n_qps_lock;
- u32 n_srqs_allocated; /* number of SRQs allocated for device */
- spinlock_t n_srqs_lock;
- u32 n_mcast_grps_allocated; /* number of mcast groups allocated */
- spinlock_t n_mcast_grps_lock;
-
- u64 ipath_sword; /* total dwords sent (sample result) */
- u64 ipath_rword; /* total dwords received (sample result) */
- u64 ipath_spkts; /* total packets sent (sample result) */
- u64 ipath_rpkts; /* total packets received (sample result) */
- /* # of ticks no data sent (sample result) */
- u64 ipath_xmit_wait;
- u64 rcv_errors; /* # of packets with SW detected rcv errs */
- u64 n_unicast_xmit; /* total unicast packets sent */
- u64 n_unicast_rcv; /* total unicast packets received */
- u64 n_multicast_xmit; /* total multicast packets sent */
- u64 n_multicast_rcv; /* total multicast packets received */
- u64 z_symbol_error_counter; /* starting count for PMA */
- u64 z_link_error_recovery_counter; /* starting count for PMA */
- u64 z_link_downed_counter; /* starting count for PMA */
- u64 z_port_rcv_errors; /* starting count for PMA */
- u64 z_port_rcv_remphys_errors; /* starting count for PMA */
- u64 z_port_xmit_discards; /* starting count for PMA */
- u64 z_port_xmit_data; /* starting count for PMA */
- u64 z_port_rcv_data; /* starting count for PMA */
- u64 z_port_xmit_packets; /* starting count for PMA */
- u64 z_port_rcv_packets; /* starting count for PMA */
- u32 z_pkey_violations; /* starting count for PMA */
- u32 z_local_link_integrity_errors; /* starting count for PMA */
- u32 z_excessive_buffer_overrun_errors; /* starting count for PMA */
- u32 z_vl15_dropped; /* starting count for PMA */
- u32 n_rc_resends;
- u32 n_rc_acks;
- u32 n_rc_qacks;
- u32 n_seq_naks;
- u32 n_rdma_seq;
- u32 n_rnr_naks;
- u32 n_other_naks;
- u32 n_timeouts;
- u32 n_pkt_drops;
- u32 n_vl15_dropped;
- u32 n_wqe_errs;
- u32 n_rdma_dup_busy;
- u32 n_piowait;
- u32 n_unaligned;
- u32 port_cap_flags;
- u32 pma_sample_start;
- u32 pma_sample_interval;
- __be16 pma_counter_select[5];
- u16 pma_tag;
- u16 qkey_violations;
- u16 mkey_violations;
- u16 mkey_lease_period;
- u16 pending_index; /* which pending queue is active */
- u8 pma_sample_status;
- u8 subnet_timeout;
- u8 vl_high_limit;
- struct ipath_opcode_stats opstats[128];
-};
-
-struct ipath_verbs_counters {
- u64 symbol_error_counter;
- u64 link_error_recovery_counter;
- u64 link_downed_counter;
- u64 port_rcv_errors;
- u64 port_rcv_remphys_errors;
- u64 port_xmit_discards;
- u64 port_xmit_data;
- u64 port_rcv_data;
- u64 port_xmit_packets;
- u64 port_rcv_packets;
- u32 local_link_integrity_errors;
- u32 excessive_buffer_overrun_errors;
- u32 vl15_dropped;
-};
-
-struct ipath_verbs_txreq {
- struct ipath_qp *qp;
- struct ipath_swqe *wqe;
- u32 map_len;
- u32 len;
- struct ipath_sge_state *ss;
- struct ipath_pio_header hdr;
- struct ipath_sdma_txreq txreq;
-};
-
-static inline struct ipath_mr *to_imr(struct ib_mr *ibmr)
-{
- return container_of(ibmr, struct ipath_mr, ibmr);
-}
-
-static inline struct ipath_pd *to_ipd(struct ib_pd *ibpd)
-{
- return container_of(ibpd, struct ipath_pd, ibpd);
-}
-
-static inline struct ipath_ah *to_iah(struct ib_ah *ibah)
-{
- return container_of(ibah, struct ipath_ah, ibah);
-}
-
-static inline struct ipath_cq *to_icq(struct ib_cq *ibcq)
-{
- return container_of(ibcq, struct ipath_cq, ibcq);
-}
-
-static inline struct ipath_srq *to_isrq(struct ib_srq *ibsrq)
-{
- return container_of(ibsrq, struct ipath_srq, ibsrq);
-}
-
-static inline struct ipath_qp *to_iqp(struct ib_qp *ibqp)
-{
- return container_of(ibqp, struct ipath_qp, ibqp);
-}
-
-static inline struct ipath_ibdev *to_idev(struct ib_device *ibdev)
-{
- return container_of(ibdev, struct ipath_ibdev, ibdev);
-}
-
-/*
- * This must be called with s_lock held.
- */
-static inline void ipath_schedule_send(struct ipath_qp *qp)
-{
- if (qp->s_flags & IPATH_S_ANY_WAIT)
- qp->s_flags &= ~IPATH_S_ANY_WAIT;
- if (!(qp->s_flags & IPATH_S_BUSY))
- tasklet_hi_schedule(&qp->s_task);
-}
-
-int ipath_process_mad(struct ib_device *ibdev,
- int mad_flags,
- u8 port_num,
- const struct ib_wc *in_wc,
- const struct ib_grh *in_grh,
- const struct ib_mad_hdr *in, size_t in_mad_size,
- struct ib_mad_hdr *out, size_t *out_mad_size,
- u16 *out_mad_pkey_index);
-
-/*
- * Compare the lower 24 bits of the two values.
- * Returns an integer <, ==, or > than zero.
- */
-static inline int ipath_cmp24(u32 a, u32 b)
-{
- return (((int) a) - ((int) b)) << 8;
-}
-
-struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid);
-
-int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
- u64 *rwords, u64 *spkts, u64 *rpkts,
- u64 *xmit_wait);
-
-int ipath_get_counters(struct ipath_devdata *dd,
- struct ipath_verbs_counters *cntrs);
-
-int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
-
-int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
-
-int ipath_mcast_tree_empty(void);
-
-__be32 ipath_compute_aeth(struct ipath_qp *qp);
-
-struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn);
-
-struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
- struct ib_qp_init_attr *init_attr,
- struct ib_udata *udata);
-
-int ipath_destroy_qp(struct ib_qp *ibqp);
-
-int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err);
-
-int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_udata *udata);
-
-int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
- int attr_mask, struct ib_qp_init_attr *init_attr);
-
-unsigned ipath_free_all_qps(struct ipath_qp_table *qpt);
-
-int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
-
-void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
-
-unsigned ipath_ib_rate_to_mult(enum ib_rate rate);
-
-int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
- u32 hdrwords, struct ipath_sge_state *ss, u32 len);
-
-void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length);
-
-void ipath_skip_sge(struct ipath_sge_state *ss, u32 length);
-
-void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn);
-
-void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err);
-
-int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
-
-void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
- int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-
-int ipath_alloc_lkey(struct ipath_lkey_table *rkt,
- struct ipath_mregion *mr);
-
-void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey);
-
-int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
- struct ib_sge *sge, int acc);
-
-int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
- u32 len, u64 vaddr, u32 rkey, int acc);
-
-int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
- struct ib_recv_wr **bad_wr);
-
-struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
- struct ib_srq_init_attr *srq_init_attr,
- struct ib_udata *udata);
-
-int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
- enum ib_srq_attr_mask attr_mask,
- struct ib_udata *udata);
-
-int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr);
-
-int ipath_destroy_srq(struct ib_srq *ibsrq);
-
-void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int sig);
-
-int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry);
-
-struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
- const struct ib_cq_init_attr *attr,
- struct ib_ucontext *context,
- struct ib_udata *udata);
-
-int ipath_destroy_cq(struct ib_cq *ibcq);
-
-int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags);
-
-int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata);
-
-struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc);
-
-struct ib_mr *ipath_reg_phys_mr(struct ib_pd *pd,
- struct ib_phys_buf *buffer_list,
- int num_phys_buf, int acc, u64 *iova_start);
-
-struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
- u64 virt_addr, int mr_access_flags,
- struct ib_udata *udata);
-
-int ipath_dereg_mr(struct ib_mr *ibmr);
-
-struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
- struct ib_fmr_attr *fmr_attr);
-
-int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
- int list_len, u64 iova);
-
-int ipath_unmap_fmr(struct list_head *fmr_list);
-
-int ipath_dealloc_fmr(struct ib_fmr *ibfmr);
-
-void ipath_release_mmap_info(struct kref *ref);
-
-struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
- u32 size,
- struct ib_ucontext *context,
- void *obj);
-
-void ipath_update_mmap_info(struct ipath_ibdev *dev,
- struct ipath_mmap_info *ip,
- u32 size, void *obj);
-
-int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma);
-
-void ipath_insert_rnr_queue(struct ipath_qp *qp);
-
-int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
- u32 *lengthp, struct ipath_sge_state *ss);
-
-int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only);
-
-u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
- struct ib_global_route *grh, u32 hwords, u32 nwords);
-
-void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
- struct ipath_other_headers *ohdr,
- u32 bth0, u32 bth2);
-
-void ipath_do_send(unsigned long data);
-
-void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
- enum ib_wc_status status);
-
-int ipath_make_rc_req(struct ipath_qp *qp);
-
-int ipath_make_uc_req(struct ipath_qp *qp);
-
-int ipath_make_ud_req(struct ipath_qp *qp);
-
-int ipath_register_ib_device(struct ipath_devdata *);
-
-void ipath_unregister_ib_device(struct ipath_ibdev *);
-
-void ipath_ib_rcv(struct ipath_ibdev *, void *, void *, u32);
-
-int ipath_ib_piobufavail(struct ipath_ibdev *);
-
-unsigned ipath_get_npkeys(struct ipath_devdata *);
-
-u32 ipath_get_cr_errpkey(struct ipath_devdata *);
-
-unsigned ipath_get_pkey(struct ipath_devdata *, unsigned);
-
-extern const enum ib_wc_opcode ib_ipath_wc_opcode[];
-
-/*
- * Below converts HCA-specific LinkTrainingState to IB PhysPortState
- * values.
- */
-extern const u8 ipath_cvt_physportstate[];
-#define IB_PHYSPORTSTATE_SLEEP 1
-#define IB_PHYSPORTSTATE_POLL 2
-#define IB_PHYSPORTSTATE_DISABLED 3
-#define IB_PHYSPORTSTATE_CFG_TRAIN 4
-#define IB_PHYSPORTSTATE_LINKUP 5
-#define IB_PHYSPORTSTATE_LINK_ERR_RECOVER 6
-
-extern const int ib_ipath_state_ops[];
-
-extern unsigned int ib_ipath_lkey_table_size;
-
-extern unsigned int ib_ipath_max_cqes;
-
-extern unsigned int ib_ipath_max_cqs;
-
-extern unsigned int ib_ipath_max_qp_wrs;
-
-extern unsigned int ib_ipath_max_qps;
-
-extern unsigned int ib_ipath_max_sges;
-
-extern unsigned int ib_ipath_max_mcast_grps;
-
-extern unsigned int ib_ipath_max_mcast_qp_attached;
-
-extern unsigned int ib_ipath_max_srqs;
-
-extern unsigned int ib_ipath_max_srq_sges;
-
-extern unsigned int ib_ipath_max_srq_wrs;
-
-extern const u32 ib_ipath_rnr_table[];
-
-extern struct ib_dma_mapping_ops ipath_dma_mapping_ops;
-
-#endif /* IPATH_VERBS_H */
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#include <linux/rculist.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include "ipath_verbs.h"
-
-/*
- * Global table of GID to attached QPs.
- * The table is global to all ipath devices since a send from one QP/device
- * needs to be locally routed to any locally attached QPs on the same
- * or different device.
- */
-static struct rb_root mcast_tree;
-static DEFINE_SPINLOCK(mcast_lock);
-
-/**
- * ipath_mcast_qp_alloc - alloc a struct to link a QP to mcast GID struct
- * @qp: the QP to link
- */
-static struct ipath_mcast_qp *ipath_mcast_qp_alloc(struct ipath_qp *qp)
-{
- struct ipath_mcast_qp *mqp;
-
- mqp = kmalloc(sizeof *mqp, GFP_KERNEL);
- if (!mqp)
- goto bail;
-
- mqp->qp = qp;
- atomic_inc(&qp->refcount);
-
-bail:
- return mqp;
-}
-
-static void ipath_mcast_qp_free(struct ipath_mcast_qp *mqp)
-{
- struct ipath_qp *qp = mqp->qp;
-
- /* Notify ipath_destroy_qp() if it is waiting. */
- if (atomic_dec_and_test(&qp->refcount))
- wake_up(&qp->wait);
-
- kfree(mqp);
-}
-
-/**
- * ipath_mcast_alloc - allocate the multicast GID structure
- * @mgid: the multicast GID
- *
- * A list of QPs will be attached to this structure.
- */
-static struct ipath_mcast *ipath_mcast_alloc(union ib_gid *mgid)
-{
- struct ipath_mcast *mcast;
-
- mcast = kmalloc(sizeof *mcast, GFP_KERNEL);
- if (!mcast)
- goto bail;
-
- mcast->mgid = *mgid;
- INIT_LIST_HEAD(&mcast->qp_list);
- init_waitqueue_head(&mcast->wait);
- atomic_set(&mcast->refcount, 0);
- mcast->n_attached = 0;
-
-bail:
- return mcast;
-}
-
-static void ipath_mcast_free(struct ipath_mcast *mcast)
-{
- struct ipath_mcast_qp *p, *tmp;
-
- list_for_each_entry_safe(p, tmp, &mcast->qp_list, list)
- ipath_mcast_qp_free(p);
-
- kfree(mcast);
-}
-
-/**
- * ipath_mcast_find - search the global table for the given multicast GID
- * @mgid: the multicast GID to search for
- *
- * Returns NULL if not found.
- *
- * The caller is responsible for decrementing the reference count if found.
- */
-struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid)
-{
- struct rb_node *n;
- unsigned long flags;
- struct ipath_mcast *mcast;
-
- spin_lock_irqsave(&mcast_lock, flags);
- n = mcast_tree.rb_node;
- while (n) {
- int ret;
-
- mcast = rb_entry(n, struct ipath_mcast, rb_node);
-
- ret = memcmp(mgid->raw, mcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0)
- n = n->rb_left;
- else if (ret > 0)
- n = n->rb_right;
- else {
- atomic_inc(&mcast->refcount);
- spin_unlock_irqrestore(&mcast_lock, flags);
- goto bail;
- }
- }
- spin_unlock_irqrestore(&mcast_lock, flags);
-
- mcast = NULL;
-
-bail:
- return mcast;
-}
-
-/**
- * ipath_mcast_add - insert mcast GID into table and attach QP struct
- * @mcast: the mcast GID table
- * @mqp: the QP to attach
- *
- * Return zero if both were added. Return EEXIST if the GID was already in
- * the table but the QP was added. Return ESRCH if the QP was already
- * attached and neither structure was added.
- */
-static int ipath_mcast_add(struct ipath_ibdev *dev,
- struct ipath_mcast *mcast,
- struct ipath_mcast_qp *mqp)
-{
- struct rb_node **n = &mcast_tree.rb_node;
- struct rb_node *pn = NULL;
- int ret;
-
- spin_lock_irq(&mcast_lock);
-
- while (*n) {
- struct ipath_mcast *tmcast;
- struct ipath_mcast_qp *p;
-
- pn = *n;
- tmcast = rb_entry(pn, struct ipath_mcast, rb_node);
-
- ret = memcmp(mcast->mgid.raw, tmcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0) {
- n = &pn->rb_left;
- continue;
- }
- if (ret > 0) {
- n = &pn->rb_right;
- continue;
- }
-
- /* Search the QP list to see if this is already there. */
- list_for_each_entry_rcu(p, &tmcast->qp_list, list) {
- if (p->qp == mqp->qp) {
- ret = ESRCH;
- goto bail;
- }
- }
- if (tmcast->n_attached == ib_ipath_max_mcast_qp_attached) {
- ret = ENOMEM;
- goto bail;
- }
-
- tmcast->n_attached++;
-
- list_add_tail_rcu(&mqp->list, &tmcast->qp_list);
- ret = EEXIST;
- goto bail;
- }
-
- spin_lock(&dev->n_mcast_grps_lock);
- if (dev->n_mcast_grps_allocated == ib_ipath_max_mcast_grps) {
- spin_unlock(&dev->n_mcast_grps_lock);
- ret = ENOMEM;
- goto bail;
- }
-
- dev->n_mcast_grps_allocated++;
- spin_unlock(&dev->n_mcast_grps_lock);
-
- mcast->n_attached++;
-
- list_add_tail_rcu(&mqp->list, &mcast->qp_list);
-
- atomic_inc(&mcast->refcount);
- rb_link_node(&mcast->rb_node, pn, n);
- rb_insert_color(&mcast->rb_node, &mcast_tree);
-
- ret = 0;
-
-bail:
- spin_unlock_irq(&mcast_lock);
-
- return ret;
-}
-
-int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_mcast *mcast;
- struct ipath_mcast_qp *mqp;
- int ret;
-
- /*
- * Allocate data structures since its better to do this outside of
- * spin locks and it will most likely be needed.
- */
- mcast = ipath_mcast_alloc(gid);
- if (mcast == NULL) {
- ret = -ENOMEM;
- goto bail;
- }
- mqp = ipath_mcast_qp_alloc(qp);
- if (mqp == NULL) {
- ipath_mcast_free(mcast);
- ret = -ENOMEM;
- goto bail;
- }
- switch (ipath_mcast_add(dev, mcast, mqp)) {
- case ESRCH:
- /* Neither was used: can't attach the same QP twice. */
- ipath_mcast_qp_free(mqp);
- ipath_mcast_free(mcast);
- ret = -EINVAL;
- goto bail;
- case EEXIST: /* The mcast wasn't used */
- ipath_mcast_free(mcast);
- break;
- case ENOMEM:
- /* Exceeded the maximum number of mcast groups. */
- ipath_mcast_qp_free(mqp);
- ipath_mcast_free(mcast);
- ret = -ENOMEM;
- goto bail;
- default:
- break;
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
-{
- struct ipath_qp *qp = to_iqp(ibqp);
- struct ipath_ibdev *dev = to_idev(ibqp->device);
- struct ipath_mcast *mcast = NULL;
- struct ipath_mcast_qp *p, *tmp;
- struct rb_node *n;
- int last = 0;
- int ret;
-
- spin_lock_irq(&mcast_lock);
-
- /* Find the GID in the mcast table. */
- n = mcast_tree.rb_node;
- while (1) {
- if (n == NULL) {
- spin_unlock_irq(&mcast_lock);
- ret = -EINVAL;
- goto bail;
- }
-
- mcast = rb_entry(n, struct ipath_mcast, rb_node);
- ret = memcmp(gid->raw, mcast->mgid.raw,
- sizeof(union ib_gid));
- if (ret < 0)
- n = n->rb_left;
- else if (ret > 0)
- n = n->rb_right;
- else
- break;
- }
-
- /* Search the QP list. */
- list_for_each_entry_safe(p, tmp, &mcast->qp_list, list) {
- if (p->qp != qp)
- continue;
- /*
- * We found it, so remove it, but don't poison the forward
- * link until we are sure there are no list walkers.
- */
- list_del_rcu(&p->list);
- mcast->n_attached--;
-
- /* If this was the last attached QP, remove the GID too. */
- if (list_empty(&mcast->qp_list)) {
- rb_erase(&mcast->rb_node, &mcast_tree);
- last = 1;
- }
- break;
- }
-
- spin_unlock_irq(&mcast_lock);
-
- if (p) {
- /*
- * Wait for any list walkers to finish before freeing the
- * list element.
- */
- wait_event(mcast->wait, atomic_read(&mcast->refcount) <= 1);
- ipath_mcast_qp_free(p);
- }
- if (last) {
- atomic_dec(&mcast->refcount);
- wait_event(mcast->wait, !atomic_read(&mcast->refcount));
- ipath_mcast_free(mcast);
- spin_lock_irq(&dev->n_mcast_grps_lock);
- dev->n_mcast_grps_allocated--;
- spin_unlock_irq(&dev->n_mcast_grps_lock);
- }
-
- ret = 0;
-
-bail:
- return ret;
-}
-
-int ipath_mcast_tree_empty(void)
-{
- return mcast_tree.rb_node == NULL;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file is conditionally built on PowerPC only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
-
-#include "ipath_kernel.h"
-
-/**
- * ipath_enable_wc - enable write combining for MMIO writes to the device
- * @dd: infinipath device
- *
- * Nothing to do on PowerPC, so just return without error.
- */
-int ipath_enable_wc(struct ipath_devdata *dd)
-{
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file is conditionally built on x86_64 only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
-
-#include <linux/pci.h>
-#include <asm/processor.h>
-
-#include "ipath_kernel.h"
-
-/**
- * ipath_enable_wc - enable write combining for MMIO writes to the device
- * @dd: infinipath device
- *
- * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
- * write combining.
- */
-int ipath_enable_wc(struct ipath_devdata *dd)
-{
- int ret = 0;
- u64 pioaddr, piolen;
- unsigned bits;
- const unsigned long addr = pci_resource_start(dd->pcidev, 0);
- const size_t len = pci_resource_len(dd->pcidev, 0);
-
- /*
- * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
- * chip. Linux (possibly the hardware) requires it to be on a power
- * of 2 address matching the length (which has to be a power of 2).
- * For rev1, that means the base address, for rev2, it will be just
- * the PIO buffers themselves.
- * For chips with two sets of buffers, the calculations are
- * somewhat more complicated; we need to sum, and the piobufbase
- * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
- * The buffers are still packed, so a single range covers both.
- */
- if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
- unsigned long pio2kbase, pio4kbase;
- pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
- pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
- if (pio2kbase < pio4kbase) { /* all, for now */
- pioaddr = addr + pio2kbase;
- piolen = pio4kbase - pio2kbase +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- } else {
- pioaddr = addr + pio4kbase;
- piolen = pio2kbase - pio4kbase +
- dd->ipath_piobcnt2k * dd->ipath_palign;
- }
- } else { /* single buffer size (2K, currently) */
- pioaddr = addr + dd->ipath_piobufbase;
- piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
- dd->ipath_piobcnt4k * dd->ipath_4kalign;
- }
-
- for (bits = 0; !(piolen & (1ULL << bits)); bits++)
- /* do nothing */ ;
-
- if (piolen != (1ULL << bits)) {
- piolen >>= bits;
- while (piolen >>= 1)
- bits++;
- piolen = 1ULL << (bits + 1);
- }
- if (pioaddr & (piolen - 1)) {
- u64 atmp;
- ipath_dbg("pioaddr %llx not on right boundary for size "
- "%llx, fixing\n",
- (unsigned long long) pioaddr,
- (unsigned long long) piolen);
- atmp = pioaddr & ~(piolen - 1);
- if (atmp < addr || (atmp + piolen) > (addr + len)) {
- ipath_dev_err(dd, "No way to align address/size "
- "(%llx/%llx), no WC mtrr\n",
- (unsigned long long) atmp,
- (unsigned long long) piolen << 1);
- ret = -ENODEV;
- } else {
- ipath_dbg("changing WC base from %llx to %llx, "
- "len from %llx to %llx\n",
- (unsigned long long) pioaddr,
- (unsigned long long) atmp,
- (unsigned long long) piolen,
- (unsigned long long) piolen << 1);
- pioaddr = atmp;
- piolen <<= 1;
- }
- }
-
- if (!ret) {
- dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
- if (dd->wc_cookie < 0) {
- ipath_dev_err(dd, "Seting mtrr failed on PIO buffers\n");
- ret = -ENODEV;
- } else if (dd->wc_cookie == 0)
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC not needed\n");
- else
- ipath_cdbg(VERBOSE, "Set mtrr for chip to WC\n");
- }
-
- return ret;
-}
-
-/**
- * ipath_disable_wc - disable write combining for MMIO writes to the device
- * @dd: infinipath device
- */
-void ipath_disable_wc(struct ipath_devdata *dd)
-{
- arch_phys_wc_del(dd->wc_cookie);
-}
# Please keep entries in alphabetic order
if STAGING_RDMA
+source "drivers/staging/rdma/ipath/Kconfig"
+
endif
# Entries for RDMA_STAGING tree
+obj-$(CONFIG_INFINIBAND_IPATH) += ipath/
--- /dev/null
+config INFINIBAND_IPATH
+ tristate "QLogic HTX HCA support"
+ depends on 64BIT && NET && HT_IRQ
+ ---help---
+ This is a driver for the deprecated QLogic Hyper-Transport
+ IB host channel adapter (model QHT7140),
+ including InfiniBand verbs support. This driver allows these
+ devices to be used with both kernel upper level protocols such
+ as IP-over-InfiniBand as well as with userspace applications
+ (in conjunction with InfiniBand userspace access).
+ For QLogic PCIe QLE based cards, use the QIB driver instead.
+
+ If you have this hardware you will need to boot with PAT disabled
+ on your x86-64 systems, use the nopat kernel parameter.
+
+ Note that this driver will soon be removed entirely from the kernel.
--- /dev/null
+ccflags-y := -DIPATH_IDSTR='"QLogic kernel.org driver"' \
+ -DIPATH_KERN_TYPE=0
+
+obj-$(CONFIG_INFINIBAND_IPATH) += ib_ipath.o
+
+ib_ipath-y := \
+ ipath_cq.o \
+ ipath_diag.o \
+ ipath_dma.o \
+ ipath_driver.o \
+ ipath_eeprom.o \
+ ipath_file_ops.o \
+ ipath_fs.o \
+ ipath_init_chip.o \
+ ipath_intr.o \
+ ipath_keys.o \
+ ipath_mad.o \
+ ipath_mmap.o \
+ ipath_mr.o \
+ ipath_qp.o \
+ ipath_rc.o \
+ ipath_ruc.o \
+ ipath_sdma.o \
+ ipath_srq.o \
+ ipath_stats.o \
+ ipath_sysfs.o \
+ ipath_uc.o \
+ ipath_ud.o \
+ ipath_user_pages.o \
+ ipath_user_sdma.o \
+ ipath_verbs_mcast.o \
+ ipath_verbs.o
+
+ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
+
+ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
+ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
--- /dev/null
+The ipath driver has been moved to staging in preparation for its removal in a
+few releases. The driver will be deleted during the 4.6 merge window.
+
+Contact Dennis Dalessandro <dennis.dalessandro@intel.com> and
+Cc: linux-rdma@vger.kernel.org
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _IPATH_COMMON_H
+#define _IPATH_COMMON_H
+
+/*
+ * This file contains defines, structures, etc. that are used
+ * to communicate between kernel and user code.
+ */
+
+
+/* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */
+#define IPATH_SRC_OUI_1 0x00
+#define IPATH_SRC_OUI_2 0x11
+#define IPATH_SRC_OUI_3 0x75
+
+/* version of protocol header (known to chip also). In the long run,
+ * we should be able to generate and accept a range of version numbers;
+ * for now we only accept one, and it's compiled in.
+ */
+#define IPS_PROTO_VERSION 2
+
+/*
+ * These are compile time constants that you may want to enable or disable
+ * if you are trying to debug problems with code or performance.
+ * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
+ * fastpath code
+ * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
+ * traced in faspath code
+ * _IPATH_TRACING define as 0 if you want to remove all tracing in a
+ * compilation unit
+ * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
+ */
+
+/*
+ * The value in the BTH QP field that InfiniPath uses to differentiate
+ * an infinipath protocol IB packet vs standard IB transport
+ */
+#define IPATH_KD_QP 0x656b79
+
+/*
+ * valid states passed to ipath_set_linkstate() user call
+ */
+#define IPATH_IB_LINKDOWN 0
+#define IPATH_IB_LINKARM 1
+#define IPATH_IB_LINKACTIVE 2
+#define IPATH_IB_LINKDOWN_ONLY 3
+#define IPATH_IB_LINKDOWN_SLEEP 4
+#define IPATH_IB_LINKDOWN_DISABLE 5
+#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
+#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
+#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */
+#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */
+
+/*
+ * These 3 values (SDR and DDR may be ORed for auto-speed
+ * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
+ * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
+ * are also the the possible values for ipath_link_speed_enabled and active
+ * The values were chosen to match values used within the IB spec.
+ */
+#define IPATH_IB_SDR 1
+#define IPATH_IB_DDR 2
+
+/*
+ * stats maintained by the driver. For now, at least, this is global
+ * to all minor devices.
+ */
+struct infinipath_stats {
+ /* number of interrupts taken */
+ __u64 sps_ints;
+ /* number of interrupts for errors */
+ __u64 sps_errints;
+ /* number of errors from chip (not incl. packet errors or CRC) */
+ __u64 sps_errs;
+ /* number of packet errors from chip other than CRC */
+ __u64 sps_pkterrs;
+ /* number of packets with CRC errors (ICRC and VCRC) */
+ __u64 sps_crcerrs;
+ /* number of hardware errors reported (parity, etc.) */
+ __u64 sps_hwerrs;
+ /* number of times IB link changed state unexpectedly */
+ __u64 sps_iblink;
+ __u64 sps_unused; /* was fastrcvint, no longer implemented */
+ /* number of kernel (port0) packets received */
+ __u64 sps_port0pkts;
+ /* number of "ethernet" packets sent by driver */
+ __u64 sps_ether_spkts;
+ /* number of "ethernet" packets received by driver */
+ __u64 sps_ether_rpkts;
+ /* number of SMA packets sent by driver. Obsolete. */
+ __u64 sps_sma_spkts;
+ /* number of SMA packets received by driver. Obsolete. */
+ __u64 sps_sma_rpkts;
+ /* number of times all ports rcvhdrq was full and packet dropped */
+ __u64 sps_hdrqfull;
+ /* number of times all ports egrtid was full and packet dropped */
+ __u64 sps_etidfull;
+ /*
+ * number of times we tried to send from driver, but no pio buffers
+ * avail
+ */
+ __u64 sps_nopiobufs;
+ /* number of ports currently open */
+ __u64 sps_ports;
+ /* list of pkeys (other than default) accepted (0 means not set) */
+ __u16 sps_pkeys[4];
+ __u16 sps_unused16[4]; /* available; maintaining compatible layout */
+ /* number of user ports per chip (not IB ports) */
+ __u32 sps_nports;
+ /* not our interrupt, or already handled */
+ __u32 sps_nullintr;
+ /* max number of packets handled per receive call */
+ __u32 sps_maxpkts_call;
+ /* avg number of packets handled per receive call */
+ __u32 sps_avgpkts_call;
+ /* total number of pages locked */
+ __u64 sps_pagelocks;
+ /* total number of pages unlocked */
+ __u64 sps_pageunlocks;
+ /*
+ * Number of packets dropped in kernel other than errors (ether
+ * packets if ipath not configured, etc.)
+ */
+ __u64 sps_krdrops;
+ __u64 sps_txeparity; /* PIO buffer parity error, recovered */
+ /* pad for future growth */
+ __u64 __sps_pad[45];
+};
+
+/*
+ * These are the status bits readable (in ascii form, 64bit value)
+ * from the "status" sysfs file.
+ */
+#define IPATH_STATUS_INITTED 0x1 /* basic initialization done */
+#define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */
+/* Device has been disabled via admin request */
+#define IPATH_STATUS_ADMIN_DISABLED 0x4
+/* Chip has been found and initted */
+#define IPATH_STATUS_CHIP_PRESENT 0x20
+/* IB link is at ACTIVE, usable for data traffic */
+#define IPATH_STATUS_IB_READY 0x40
+/* link is configured, LID, MTU, etc. have been set */
+#define IPATH_STATUS_IB_CONF 0x80
+/* no link established, probably no cable */
+#define IPATH_STATUS_IB_NOCABLE 0x100
+/* A Fatal hardware error has occurred. */
+#define IPATH_STATUS_HWERROR 0x200
+
+/*
+ * The list of usermode accessible registers. Also see Reg_* later in file.
+ */
+typedef enum _ipath_ureg {
+ /* (RO) DMA RcvHdr to be used next. */
+ ur_rcvhdrtail = 0,
+ /* (RW) RcvHdr entry to be processed next by host. */
+ ur_rcvhdrhead = 1,
+ /* (RO) Index of next Eager index to use. */
+ ur_rcvegrindextail = 2,
+ /* (RW) Eager TID to be processed next */
+ ur_rcvegrindexhead = 3,
+ /* For internal use only; max register number. */
+ _IPATH_UregMax
+} ipath_ureg;
+
+/* bit values for spi_runtime_flags */
+#define IPATH_RUNTIME_HT 0x1
+#define IPATH_RUNTIME_PCIE 0x2
+#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
+#define IPATH_RUNTIME_RCVHDR_COPY 0x8
+#define IPATH_RUNTIME_MASTER 0x10
+#define IPATH_RUNTIME_NODMA_RTAIL 0x80
+#define IPATH_RUNTIME_SDMA 0x200
+#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400
+#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800
+
+/*
+ * This structure is returned by ipath_userinit() immediately after
+ * open to get implementation-specific info, and info specific to this
+ * instance.
+ *
+ * This struct must have explict pad fields where type sizes
+ * may result in different alignments between 32 and 64 bit
+ * programs, since the 64 bit * bit kernel requires the user code
+ * to have matching offsets
+ */
+struct ipath_base_info {
+ /* version of hardware, for feature checking. */
+ __u32 spi_hw_version;
+ /* version of software, for feature checking. */
+ __u32 spi_sw_version;
+ /* InfiniPath port assigned, goes into sent packets */
+ __u16 spi_port;
+ __u16 spi_subport;
+ /*
+ * IB MTU, packets IB data must be less than this.
+ * The MTU is in bytes, and will be a multiple of 4 bytes.
+ */
+ __u32 spi_mtu;
+ /*
+ * Size of a PIO buffer. Any given packet's total size must be less
+ * than this (in words). Included is the starting control word, so
+ * if 513 is returned, then total pkt size is 512 words or less.
+ */
+ __u32 spi_piosize;
+ /* size of the TID cache in infinipath, in entries */
+ __u32 spi_tidcnt;
+ /* size of the TID Eager list in infinipath, in entries */
+ __u32 spi_tidegrcnt;
+ /* size of a single receive header queue entry in words. */
+ __u32 spi_rcvhdrent_size;
+ /*
+ * Count of receive header queue entries allocated.
+ * This may be less than the spu_rcvhdrcnt passed in!.
+ */
+ __u32 spi_rcvhdr_cnt;
+
+ /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
+ __u32 spi_runtime_flags;
+
+ /* address where receive buffer queue is mapped into */
+ __u64 spi_rcvhdr_base;
+
+ /* user program. */
+
+ /* base address of eager TID receive buffers. */
+ __u64 spi_rcv_egrbufs;
+
+ /* Allocated by initialization code, not by protocol. */
+
+ /*
+ * Size of each TID buffer in host memory, starting at
+ * spi_rcv_egrbufs. The buffers are virtually contiguous.
+ */
+ __u32 spi_rcv_egrbufsize;
+ /*
+ * The special QP (queue pair) value that identifies an infinipath
+ * protocol packet from standard IB packets. More, probably much
+ * more, to be added.
+ */
+ __u32 spi_qpair;
+
+ /*
+ * User register base for init code, not to be used directly by
+ * protocol or applications.
+ */
+ __u64 __spi_uregbase;
+ /*
+ * Maximum buffer size in bytes that can be used in a single TID
+ * entry (assuming the buffer is aligned to this boundary). This is
+ * the minimum of what the hardware and software support Guaranteed
+ * to be a power of 2.
+ */
+ __u32 spi_tid_maxsize;
+ /*
+ * alignment of each pio send buffer (byte count
+ * to add to spi_piobufbase to get to second buffer)
+ */
+ __u32 spi_pioalign;
+ /*
+ * The index of the first pio buffer available to this process;
+ * needed to do lookup in spi_pioavailaddr; not added to
+ * spi_piobufbase.
+ */
+ __u32 spi_pioindex;
+ /* number of buffers mapped for this process */
+ __u32 spi_piocnt;
+
+ /*
+ * Base address of writeonly pio buffers for this process.
+ * Each buffer has spi_piosize words, and is aligned on spi_pioalign
+ * boundaries. spi_piocnt buffers are mapped from this address
+ */
+ __u64 spi_piobufbase;
+
+ /*
+ * Base address of readonly memory copy of the pioavail registers.
+ * There are 2 bits for each buffer.
+ */
+ __u64 spi_pioavailaddr;
+
+ /*
+ * Address where driver updates a copy of the interface and driver
+ * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a
+ * string indicating hardware error, if there was one.
+ */
+ __u64 spi_status;
+
+ /* number of chip ports available to user processes */
+ __u32 spi_nports;
+ /* unit number of chip we are using */
+ __u32 spi_unit;
+ /* num bufs in each contiguous set */
+ __u32 spi_rcv_egrperchunk;
+ /* size in bytes of each contiguous set */
+ __u32 spi_rcv_egrchunksize;
+ /* total size of mmap to cover full rcvegrbuffers */
+ __u32 spi_rcv_egrbuftotlen;
+ __u32 spi_filler_for_align;
+ /* address of readonly memory copy of the rcvhdrq tail register. */
+ __u64 spi_rcvhdr_tailaddr;
+
+ /* shared memory pages for subports if port is shared */
+ __u64 spi_subport_uregbase;
+ __u64 spi_subport_rcvegrbuf;
+ __u64 spi_subport_rcvhdr_base;
+
+ /* shared memory page for hardware port if it is shared */
+ __u64 spi_port_uregbase;
+ __u64 spi_port_rcvegrbuf;
+ __u64 spi_port_rcvhdr_base;
+ __u64 spi_port_rcvhdr_tailaddr;
+
+} __attribute__ ((aligned(8)));
+
+
+/*
+ * This version number is given to the driver by the user code during
+ * initialization in the spu_userversion field of ipath_user_info, so
+ * the driver can check for compatibility with user code.
+ *
+ * The major version changes when data structures
+ * change in an incompatible way. The driver must be the same or higher
+ * for initialization to succeed. In some cases, a higher version
+ * driver will not interoperate with older software, and initialization
+ * will return an error.
+ */
+#define IPATH_USER_SWMAJOR 1
+
+/*
+ * Minor version differences are always compatible
+ * a within a major version, however if user software is larger
+ * than driver software, some new features and/or structure fields
+ * may not be implemented; the user code must deal with this if it
+ * cares, or it must abort after initialization reports the difference.
+ */
+#define IPATH_USER_SWMINOR 6
+
+#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
+
+#define IPATH_KERN_TYPE 0
+
+/*
+ * Similarly, this is the kernel version going back to the user. It's
+ * slightly different, in that we want to tell if the driver was built as
+ * part of a QLogic release, or from the driver from openfabrics.org,
+ * kernel.org, or a standard distribution, for support reasons.
+ * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
+ *
+ * It's returned by the driver to the user code during initialization in the
+ * spi_sw_version field of ipath_base_info, so the user code can in turn
+ * check for compatibility with the kernel.
+*/
+#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
+
+/*
+ * This structure is passed to ipath_userinit() to tell the driver where
+ * user code buffers are, sizes, etc. The offsets and sizes of the
+ * fields must remain unchanged, for binary compatibility. It can
+ * be extended, if userversion is changed so user code can tell, if needed
+ */
+struct ipath_user_info {
+ /*
+ * version of user software, to detect compatibility issues.
+ * Should be set to IPATH_USER_SWVERSION.
+ */
+ __u32 spu_userversion;
+
+ /* desired number of receive header queue entries */
+ __u32 spu_rcvhdrcnt;
+
+ /* size of struct base_info to write to */
+ __u32 spu_base_info_size;
+
+ /*
+ * number of words in KD protocol header
+ * This tells InfiniPath how many words to copy to rcvhdrq. If 0,
+ * kernel uses a default. Once set, attempts to set any other value
+ * are an error (EAGAIN) until driver is reloaded.
+ */
+ __u32 spu_rcvhdrsize;
+
+ /*
+ * If two or more processes wish to share a port, each process
+ * must set the spu_subport_cnt and spu_subport_id to the same
+ * values. The only restriction on the spu_subport_id is that
+ * it be unique for a given node.
+ */
+ __u16 spu_subport_cnt;
+ __u16 spu_subport_id;
+
+ __u32 spu_unused; /* kept for compatible layout */
+
+ /*
+ * address of struct base_info to write to
+ */
+ __u64 spu_base_info;
+
+} __attribute__ ((aligned(8)));
+
+/* User commands. */
+
+#define IPATH_CMD_MIN 16
+
+#define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */
+#define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */
+#define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */
+#define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */
+#define IPATH_CMD_TID_FREE 20 /* free expected TID entries */
+#define IPATH_CMD_SET_PART_KEY 21 /* add partition key */
+#define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */
+#define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */
+#define IPATH_CMD_USER_INIT 24 /* set up userspace */
+#define IPATH_CMD_UNUSED_1 25
+#define IPATH_CMD_UNUSED_2 26
+#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
+#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
+#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
+/* 30 is unused */
+#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
+#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
+
+/*
+ * Poll types
+ */
+#define IPATH_POLL_TYPE_URGENT 0x01
+#define IPATH_POLL_TYPE_OVERFLOW 0x02
+
+struct ipath_port_info {
+ __u32 num_active; /* number of active units */
+ __u32 unit; /* unit (chip) assigned to caller */
+ __u16 port; /* port on unit assigned to caller */
+ __u16 subport; /* subport on unit assigned to caller */
+ __u16 num_ports; /* number of ports available on unit */
+ __u16 num_subports; /* number of subports opened on port */
+};
+
+struct ipath_tid_info {
+ __u32 tidcnt;
+ /* make structure same size in 32 and 64 bit */
+ __u32 tid__unused;
+ /* virtual address of first page in transfer */
+ __u64 tidvaddr;
+ /* pointer (same size 32/64 bit) to __u16 tid array */
+ __u64 tidlist;
+
+ /*
+ * pointer (same size 32/64 bit) to bitmap of TIDs used
+ * for this call; checked for being large enough at open
+ */
+ __u64 tidmap;
+};
+
+struct ipath_cmd {
+ __u32 type; /* command type */
+ union {
+ struct ipath_tid_info tid_info;
+ struct ipath_user_info user_info;
+
+ /*
+ * address in userspace where we should put the sdma
+ * inflight counter
+ */
+ __u64 sdma_inflight;
+ /*
+ * address in userspace where we should put the sdma
+ * completion counter
+ */
+ __u64 sdma_complete;
+ /* address in userspace of struct ipath_port_info to
+ write result to */
+ __u64 port_info;
+ /* enable/disable receipt of packets */
+ __u32 recv_ctrl;
+ /* enable/disable armlaunch errors (non-zero to enable) */
+ __u32 armlaunch_ctrl;
+ /* partition key to set */
+ __u16 part_key;
+ /* user address of __u32 bitmask of active slaves */
+ __u64 slave_mask_addr;
+ /* type of polling we want */
+ __u16 poll_type;
+ } cmd;
+};
+
+struct ipath_iovec {
+ /* Pointer to data, but same size 32 and 64 bit */
+ __u64 iov_base;
+
+ /*
+ * Length of data; don't need 64 bits, but want
+ * ipath_sendpkt to remain same size as before 32 bit changes, so...
+ */
+ __u64 iov_len;
+};
+
+/*
+ * Describes a single packet for send. Each packet can have one or more
+ * buffers, but the total length (exclusive of IB headers) must be less
+ * than the MTU, and if using the PIO method, entire packet length,
+ * including IB headers, must be less than the ipath_piosize value (words).
+ * Use of this necessitates including sys/uio.h
+ */
+struct __ipath_sendpkt {
+ __u32 sps_flags; /* flags for packet (TBD) */
+ __u32 sps_cnt; /* number of entries to use in sps_iov */
+ /* array of iov's describing packet. TEMPORARY */
+ struct ipath_iovec sps_iov[4];
+};
+
+/*
+ * diagnostics can send a packet by "writing" one of the following
+ * two structs to diag data special file
+ * The first is the legacy version for backward compatibility
+ */
+struct ipath_diag_pkt {
+ __u32 unit;
+ __u64 data;
+ __u32 len;
+};
+
+/* The second diag_pkt struct is the expanded version that allows
+ * more control over the packet, specifically, by allowing a custom
+ * pbc (+ static rate) qword, so that special modes and deliberate
+ * changes to CRCs can be used. The elements were also re-ordered
+ * for better alignment and to avoid padding issues.
+ */
+struct ipath_diag_xpkt {
+ __u64 data;
+ __u64 pbc_wd;
+ __u32 unit;
+ __u32 len;
+};
+
+/*
+ * Data layout in I2C flash (for GUID, etc.)
+ * All fields are little-endian binary unless otherwise stated
+ */
+#define IPATH_FLASH_VERSION 2
+struct ipath_flash {
+ /* flash layout version (IPATH_FLASH_VERSION) */
+ __u8 if_fversion;
+ /* checksum protecting if_length bytes */
+ __u8 if_csum;
+ /*
+ * valid length (in use, protected by if_csum), including
+ * if_fversion and if_csum themselves)
+ */
+ __u8 if_length;
+ /* the GUID, in network order */
+ __u8 if_guid[8];
+ /* number of GUIDs to use, starting from if_guid */
+ __u8 if_numguid;
+ /* the (last 10 characters of) board serial number, in ASCII */
+ char if_serial[12];
+ /* board mfg date (YYYYMMDD ASCII) */
+ char if_mfgdate[8];
+ /* last board rework/test date (YYYYMMDD ASCII) */
+ char if_testdate[8];
+ /* logging of error counts, TBD */
+ __u8 if_errcntp[4];
+ /* powered on hours, updated at driver unload */
+ __u8 if_powerhour[2];
+ /* ASCII free-form comment field */
+ char if_comment[32];
+ /* Backwards compatible prefix for longer QLogic Serial Numbers */
+ char if_sprefix[4];
+ /* 82 bytes used, min flash size is 128 bytes */
+ __u8 if_future[46];
+};
+
+/*
+ * These are the counters implemented in the chip, and are listed in order.
+ * The InterCaps naming is taken straight from the chip spec.
+ */
+struct infinipath_counters {
+ __u64 LBIntCnt;
+ __u64 LBFlowStallCnt;
+ __u64 TxSDmaDescCnt; /* was Reserved1 */
+ __u64 TxUnsupVLErrCnt;
+ __u64 TxDataPktCnt;
+ __u64 TxFlowPktCnt;
+ __u64 TxDwordCnt;
+ __u64 TxLenErrCnt;
+ __u64 TxMaxMinLenErrCnt;
+ __u64 TxUnderrunCnt;
+ __u64 TxFlowStallCnt;
+ __u64 TxDroppedPktCnt;
+ __u64 RxDroppedPktCnt;
+ __u64 RxDataPktCnt;
+ __u64 RxFlowPktCnt;
+ __u64 RxDwordCnt;
+ __u64 RxLenErrCnt;
+ __u64 RxMaxMinLenErrCnt;
+ __u64 RxICRCErrCnt;
+ __u64 RxVCRCErrCnt;
+ __u64 RxFlowCtrlErrCnt;
+ __u64 RxBadFormatCnt;
+ __u64 RxLinkProblemCnt;
+ __u64 RxEBPCnt;
+ __u64 RxLPCRCErrCnt;
+ __u64 RxBufOvflCnt;
+ __u64 RxTIDFullErrCnt;
+ __u64 RxTIDValidErrCnt;
+ __u64 RxPKeyMismatchCnt;
+ __u64 RxP0HdrEgrOvflCnt;
+ __u64 RxP1HdrEgrOvflCnt;
+ __u64 RxP2HdrEgrOvflCnt;
+ __u64 RxP3HdrEgrOvflCnt;
+ __u64 RxP4HdrEgrOvflCnt;
+ __u64 RxP5HdrEgrOvflCnt;
+ __u64 RxP6HdrEgrOvflCnt;
+ __u64 RxP7HdrEgrOvflCnt;
+ __u64 RxP8HdrEgrOvflCnt;
+ __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
+ __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
+ __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 IBStatusChangeCnt;
+ __u64 IBLinkErrRecoveryCnt;
+ __u64 IBLinkDownedCnt;
+ __u64 IBSymbolErrCnt;
+ /* The following are new for IBA7220 */
+ __u64 RxVL15DroppedPktCnt;
+ __u64 RxOtherLocalPhyErrCnt;
+ __u64 PcieRetryBufDiagQwordCnt;
+ __u64 ExcessBufferOvflCnt;
+ __u64 LocalLinkIntegrityErrCnt;
+ __u64 RxVlErrCnt;
+ __u64 RxDlidFltrCnt;
+};
+
+/*
+ * The next set of defines are for packet headers, and chip register
+ * and memory bits that are visible to and/or used by user-mode software
+ * The other bits that are used only by the driver or diags are in
+ * ipath_registers.h
+ */
+
+/* RcvHdrFlags bits */
+#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
+#define INFINIPATH_RHF_LENGTH_SHIFT 0
+#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
+#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
+#define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF
+#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
+#define INFINIPATH_RHF_SEQ_MASK 0xF
+#define INFINIPATH_RHF_SEQ_SHIFT 0
+#define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF
+#define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4
+#define INFINIPATH_RHF_H_ICRCERR 0x80000000
+#define INFINIPATH_RHF_H_VCRCERR 0x40000000
+#define INFINIPATH_RHF_H_PARITYERR 0x20000000
+#define INFINIPATH_RHF_H_LENERR 0x10000000
+#define INFINIPATH_RHF_H_MTUERR 0x08000000
+#define INFINIPATH_RHF_H_IHDRERR 0x04000000
+#define INFINIPATH_RHF_H_TIDERR 0x02000000
+#define INFINIPATH_RHF_H_MKERR 0x01000000
+#define INFINIPATH_RHF_H_IBERR 0x00800000
+#define INFINIPATH_RHF_H_ERR_MASK 0xFF800000
+#define INFINIPATH_RHF_L_USE_EGR 0x80000000
+#define INFINIPATH_RHF_L_SWA 0x00008000
+#define INFINIPATH_RHF_L_SWB 0x00004000
+
+/* infinipath header fields */
+#define INFINIPATH_I_VERS_MASK 0xF
+#define INFINIPATH_I_VERS_SHIFT 28
+#define INFINIPATH_I_PORT_MASK 0xF
+#define INFINIPATH_I_PORT_SHIFT 24
+#define INFINIPATH_I_TID_MASK 0x7FF
+#define INFINIPATH_I_TID_SHIFT 13
+#define INFINIPATH_I_OFFSET_MASK 0x1FFF
+#define INFINIPATH_I_OFFSET_SHIFT 0
+
+/* K_PktFlags bits */
+#define INFINIPATH_KPF_INTR 0x1
+#define INFINIPATH_KPF_SUBPORT_MASK 0x3
+#define INFINIPATH_KPF_SUBPORT_SHIFT 1
+
+#define INFINIPATH_MAX_SUBPORT 4
+
+/* SendPIO per-buffer control */
+#define INFINIPATH_SP_TEST 0x40
+#define INFINIPATH_SP_TESTEBP 0x20
+#define INFINIPATH_SP_TRIGGER_SHIFT 15
+
+/* SendPIOAvail bits */
+#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
+#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
+
+/* infinipath header format */
+struct ipath_header {
+ /*
+ * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
+ * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
+ * Port 4, TID 11, offset 13.
+ */
+ __le32 ver_port_tid_offset;
+ __le16 chksum;
+ __le16 pkt_flags;
+};
+
+/* infinipath user message header format.
+ * This structure contains the first 4 fields common to all protocols
+ * that employ infinipath.
+ */
+struct ipath_message_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ /* fields below this point are in host byte order */
+ struct ipath_header iph;
+ __u8 sub_opcode;
+};
+
+/* infinipath ethernet header format */
+struct ether_header {
+ __be16 lrh[4];
+ __be32 bth[3];
+ struct ipath_header iph;
+ __u8 sub_opcode;
+ __u8 cmd;
+ __be16 lid;
+ __u16 mac[3];
+ __u8 frag_num;
+ __u8 seq_num;
+ __le32 len;
+ /* MUST be of word size due to PIO write requirements */
+ __le32 csum;
+ __le16 csum_offset;
+ __le16 flags;
+ __u16 first_2_bytes;
+ __u8 unused[2]; /* currently unused */
+};
+
+
+/* IB - LRH header consts */
+#define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
+#define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
+
+/* misc. */
+#define SIZE_OF_CRC 1
+
+#define IPATH_DEFAULT_P_KEY 0xFFFF
+#define IPATH_PERMISSIVE_LID 0xFFFF
+#define IPATH_AETH_CREDIT_SHIFT 24
+#define IPATH_AETH_CREDIT_MASK 0x1F
+#define IPATH_AETH_CREDIT_INVAL 0x1F
+#define IPATH_PSN_MASK 0xFFFFFF
+#define IPATH_MSN_MASK 0xFFFFFF
+#define IPATH_QPN_MASK 0xFFFFFF
+#define IPATH_MULTICAST_LID_BASE 0xC000
+#define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK
+#define IPATH_MULTICAST_QPN 0xFFFFFF
+
+/* Receive Header Queue: receive type (from infinipath) */
+#define RCVHQ_RCV_TYPE_EXPECTED 0
+#define RCVHQ_RCV_TYPE_EAGER 1
+#define RCVHQ_RCV_TYPE_NON_KD 2
+#define RCVHQ_RCV_TYPE_ERROR 3
+
+
+/* sub OpCodes - ith4x */
+#define IPATH_ITH4X_OPCODE_ENCAP 0x81
+#define IPATH_ITH4X_OPCODE_LID_ARP 0x82
+
+#define IPATH_HEADER_QUEUE_WORDS 9
+
+/* functions for extracting fields from rcvhdrq entries for the driver.
+ */
+static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
+{
+ return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK;
+}
+
+static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
+ & INFINIPATH_RHF_RCVTYPE_MASK;
+}
+
+static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf)
+{
+ return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
+ & INFINIPATH_RHF_LENGTH_MASK) << 2;
+}
+
+static inline __u32 ipath_hdrget_index(const __le32 * rbuf)
+{
+ return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
+ & INFINIPATH_RHF_EGRINDEX_MASK;
+}
+
+static inline __u32 ipath_hdrget_seq(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT)
+ & INFINIPATH_RHF_SEQ_MASK;
+}
+
+static inline __u32 ipath_hdrget_offset(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT)
+ & INFINIPATH_RHF_HDRQ_OFFSET_MASK;
+}
+
+static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf)
+{
+ return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR;
+}
+
+static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
+{
+ return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
+ & INFINIPATH_I_VERS_MASK;
+}
+
+#endif /* _IPATH_COMMON_H */
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_verbs.h"
+
+/**
+ * ipath_cq_enter - add a new entry to the completion queue
+ * @cq: completion queue
+ * @entry: work completion entry to add
+ * @sig: true if @entry is a solicitated entry
+ *
+ * This may be called with qp->s_lock held.
+ */
+void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int solicited)
+{
+ struct ipath_cq_wc *wc;
+ unsigned long flags;
+ u32 head;
+ u32 next;
+
+ spin_lock_irqsave(&cq->lock, flags);
+
+ /*
+ * Note that the head pointer might be writable by user processes.
+ * Take care to verify it is a sane value.
+ */
+ wc = cq->queue;
+ head = wc->head;
+ if (head >= (unsigned) cq->ibcq.cqe) {
+ head = cq->ibcq.cqe;
+ next = 0;
+ } else
+ next = head + 1;
+ if (unlikely(next == wc->tail)) {
+ spin_unlock_irqrestore(&cq->lock, flags);
+ if (cq->ibcq.event_handler) {
+ struct ib_event ev;
+
+ ev.device = cq->ibcq.device;
+ ev.element.cq = &cq->ibcq;
+ ev.event = IB_EVENT_CQ_ERR;
+ cq->ibcq.event_handler(&ev, cq->ibcq.cq_context);
+ }
+ return;
+ }
+ if (cq->ip) {
+ wc->uqueue[head].wr_id = entry->wr_id;
+ wc->uqueue[head].status = entry->status;
+ wc->uqueue[head].opcode = entry->opcode;
+ wc->uqueue[head].vendor_err = entry->vendor_err;
+ wc->uqueue[head].byte_len = entry->byte_len;
+ wc->uqueue[head].ex.imm_data = (__u32 __force) entry->ex.imm_data;
+ wc->uqueue[head].qp_num = entry->qp->qp_num;
+ wc->uqueue[head].src_qp = entry->src_qp;
+ wc->uqueue[head].wc_flags = entry->wc_flags;
+ wc->uqueue[head].pkey_index = entry->pkey_index;
+ wc->uqueue[head].slid = entry->slid;
+ wc->uqueue[head].sl = entry->sl;
+ wc->uqueue[head].dlid_path_bits = entry->dlid_path_bits;
+ wc->uqueue[head].port_num = entry->port_num;
+ /* Make sure entry is written before the head index. */
+ smp_wmb();
+ } else
+ wc->kqueue[head] = *entry;
+ wc->head = next;
+
+ if (cq->notify == IB_CQ_NEXT_COMP ||
+ (cq->notify == IB_CQ_SOLICITED && solicited)) {
+ cq->notify = IB_CQ_NONE;
+ cq->triggered++;
+ /*
+ * This will cause send_complete() to be called in
+ * another thread.
+ */
+ tasklet_hi_schedule(&cq->comptask);
+ }
+
+ spin_unlock_irqrestore(&cq->lock, flags);
+
+ if (entry->status != IB_WC_SUCCESS)
+ to_idev(cq->ibcq.device)->n_wqe_errs++;
+}
+
+/**
+ * ipath_poll_cq - poll for work completion entries
+ * @ibcq: the completion queue to poll
+ * @num_entries: the maximum number of entries to return
+ * @entry: pointer to array where work completions are placed
+ *
+ * Returns the number of completion entries polled.
+ *
+ * This may be called from interrupt context. Also called by ib_poll_cq()
+ * in the generic verbs code.
+ */
+int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry)
+{
+ struct ipath_cq *cq = to_icq(ibcq);
+ struct ipath_cq_wc *wc;
+ unsigned long flags;
+ int npolled;
+ u32 tail;
+
+ /* The kernel can only poll a kernel completion queue */
+ if (cq->ip) {
+ npolled = -EINVAL;
+ goto bail;
+ }
+
+ spin_lock_irqsave(&cq->lock, flags);
+
+ wc = cq->queue;
+ tail = wc->tail;
+ if (tail > (u32) cq->ibcq.cqe)
+ tail = (u32) cq->ibcq.cqe;
+ for (npolled = 0; npolled < num_entries; ++npolled, ++entry) {
+ if (tail == wc->head)
+ break;
+ /* The kernel doesn't need a RMB since it has the lock. */
+ *entry = wc->kqueue[tail];
+ if (tail >= cq->ibcq.cqe)
+ tail = 0;
+ else
+ tail++;
+ }
+ wc->tail = tail;
+
+ spin_unlock_irqrestore(&cq->lock, flags);
+
+bail:
+ return npolled;
+}
+
+static void send_complete(unsigned long data)
+{
+ struct ipath_cq *cq = (struct ipath_cq *)data;
+
+ /*
+ * The completion handler will most likely rearm the notification
+ * and poll for all pending entries. If a new completion entry
+ * is added while we are in this routine, tasklet_hi_schedule()
+ * won't call us again until we return so we check triggered to
+ * see if we need to call the handler again.
+ */
+ for (;;) {
+ u8 triggered = cq->triggered;
+
+ cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context);
+
+ if (cq->triggered == triggered)
+ return;
+ }
+}
+
+/**
+ * ipath_create_cq - create a completion queue
+ * @ibdev: the device this completion queue is attached to
+ * @attr: creation attributes
+ * @context: unused by the InfiniPath driver
+ * @udata: unused by the InfiniPath driver
+ *
+ * Returns a pointer to the completion queue or negative errno values
+ * for failure.
+ *
+ * Called by ib_create_cq() in the generic verbs code.
+ */
+struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
+ const struct ib_cq_init_attr *attr,
+ struct ib_ucontext *context,
+ struct ib_udata *udata)
+{
+ int entries = attr->cqe;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_cq *cq;
+ struct ipath_cq_wc *wc;
+ struct ib_cq *ret;
+ u32 sz;
+
+ if (attr->flags)
+ return ERR_PTR(-EINVAL);
+
+ if (entries < 1 || entries > ib_ipath_max_cqes) {
+ ret = ERR_PTR(-EINVAL);
+ goto done;
+ }
+
+ /* Allocate the completion queue structure. */
+ cq = kmalloc(sizeof(*cq), GFP_KERNEL);
+ if (!cq) {
+ ret = ERR_PTR(-ENOMEM);
+ goto done;
+ }
+
+ /*
+ * Allocate the completion queue entries and head/tail pointers.
+ * This is allocated separately so that it can be resized and
+ * also mapped into user space.
+ * We need to use vmalloc() in order to support mmap and large
+ * numbers of entries.
+ */
+ sz = sizeof(*wc);
+ if (udata && udata->outlen >= sizeof(__u64))
+ sz += sizeof(struct ib_uverbs_wc) * (entries + 1);
+ else
+ sz += sizeof(struct ib_wc) * (entries + 1);
+ wc = vmalloc_user(sz);
+ if (!wc) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_cq;
+ }
+
+ /*
+ * Return the address of the WC as the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ int err;
+
+ cq->ip = ipath_create_mmap_info(dev, sz, context, wc);
+ if (!cq->ip) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_wc;
+ }
+
+ err = ib_copy_to_udata(udata, &cq->ip->offset,
+ sizeof(cq->ip->offset));
+ if (err) {
+ ret = ERR_PTR(err);
+ goto bail_ip;
+ }
+ } else
+ cq->ip = NULL;
+
+ spin_lock(&dev->n_cqs_lock);
+ if (dev->n_cqs_allocated == ib_ipath_max_cqs) {
+ spin_unlock(&dev->n_cqs_lock);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_ip;
+ }
+
+ dev->n_cqs_allocated++;
+ spin_unlock(&dev->n_cqs_lock);
+
+ if (cq->ip) {
+ spin_lock_irq(&dev->pending_lock);
+ list_add(&cq->ip->pending_mmaps, &dev->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+ }
+
+ /*
+ * ib_create_cq() will initialize cq->ibcq except for cq->ibcq.cqe.
+ * The number of entries should be >= the number requested or return
+ * an error.
+ */
+ cq->ibcq.cqe = entries;
+ cq->notify = IB_CQ_NONE;
+ cq->triggered = 0;
+ spin_lock_init(&cq->lock);
+ tasklet_init(&cq->comptask, send_complete, (unsigned long)cq);
+ wc->head = 0;
+ wc->tail = 0;
+ cq->queue = wc;
+
+ ret = &cq->ibcq;
+
+ goto done;
+
+bail_ip:
+ kfree(cq->ip);
+bail_wc:
+ vfree(wc);
+bail_cq:
+ kfree(cq);
+done:
+ return ret;
+}
+
+/**
+ * ipath_destroy_cq - destroy a completion queue
+ * @ibcq: the completion queue to destroy.
+ *
+ * Returns 0 for success.
+ *
+ * Called by ib_destroy_cq() in the generic verbs code.
+ */
+int ipath_destroy_cq(struct ib_cq *ibcq)
+{
+ struct ipath_ibdev *dev = to_idev(ibcq->device);
+ struct ipath_cq *cq = to_icq(ibcq);
+
+ tasklet_kill(&cq->comptask);
+ spin_lock(&dev->n_cqs_lock);
+ dev->n_cqs_allocated--;
+ spin_unlock(&dev->n_cqs_lock);
+ if (cq->ip)
+ kref_put(&cq->ip->ref, ipath_release_mmap_info);
+ else
+ vfree(cq->queue);
+ kfree(cq);
+
+ return 0;
+}
+
+/**
+ * ipath_req_notify_cq - change the notification type for a completion queue
+ * @ibcq: the completion queue
+ * @notify_flags: the type of notification to request
+ *
+ * Returns 0 for success.
+ *
+ * This may be called from interrupt context. Also called by
+ * ib_req_notify_cq() in the generic verbs code.
+ */
+int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags)
+{
+ struct ipath_cq *cq = to_icq(ibcq);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&cq->lock, flags);
+ /*
+ * Don't change IB_CQ_NEXT_COMP to IB_CQ_SOLICITED but allow
+ * any other transitions (see C11-31 and C11-32 in ch. 11.4.2.2).
+ */
+ if (cq->notify != IB_CQ_NEXT_COMP)
+ cq->notify = notify_flags & IB_CQ_SOLICITED_MASK;
+
+ if ((notify_flags & IB_CQ_REPORT_MISSED_EVENTS) &&
+ cq->queue->head != cq->queue->tail)
+ ret = 1;
+
+ spin_unlock_irqrestore(&cq->lock, flags);
+
+ return ret;
+}
+
+/**
+ * ipath_resize_cq - change the size of the CQ
+ * @ibcq: the completion queue
+ *
+ * Returns 0 for success.
+ */
+int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata)
+{
+ struct ipath_cq *cq = to_icq(ibcq);
+ struct ipath_cq_wc *old_wc;
+ struct ipath_cq_wc *wc;
+ u32 head, tail, n;
+ int ret;
+ u32 sz;
+
+ if (cqe < 1 || cqe > ib_ipath_max_cqes) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /*
+ * Need to use vmalloc() if we want to support large #s of entries.
+ */
+ sz = sizeof(*wc);
+ if (udata && udata->outlen >= sizeof(__u64))
+ sz += sizeof(struct ib_uverbs_wc) * (cqe + 1);
+ else
+ sz += sizeof(struct ib_wc) * (cqe + 1);
+ wc = vmalloc_user(sz);
+ if (!wc) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ /* Check that we can write the offset to mmap. */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ __u64 offset = 0;
+
+ ret = ib_copy_to_udata(udata, &offset, sizeof(offset));
+ if (ret)
+ goto bail_free;
+ }
+
+ spin_lock_irq(&cq->lock);
+ /*
+ * Make sure head and tail are sane since they
+ * might be user writable.
+ */
+ old_wc = cq->queue;
+ head = old_wc->head;
+ if (head > (u32) cq->ibcq.cqe)
+ head = (u32) cq->ibcq.cqe;
+ tail = old_wc->tail;
+ if (tail > (u32) cq->ibcq.cqe)
+ tail = (u32) cq->ibcq.cqe;
+ if (head < tail)
+ n = cq->ibcq.cqe + 1 + head - tail;
+ else
+ n = head - tail;
+ if (unlikely((u32)cqe < n)) {
+ ret = -EINVAL;
+ goto bail_unlock;
+ }
+ for (n = 0; tail != head; n++) {
+ if (cq->ip)
+ wc->uqueue[n] = old_wc->uqueue[tail];
+ else
+ wc->kqueue[n] = old_wc->kqueue[tail];
+ if (tail == (u32) cq->ibcq.cqe)
+ tail = 0;
+ else
+ tail++;
+ }
+ cq->ibcq.cqe = cqe;
+ wc->head = n;
+ wc->tail = 0;
+ cq->queue = wc;
+ spin_unlock_irq(&cq->lock);
+
+ vfree(old_wc);
+
+ if (cq->ip) {
+ struct ipath_ibdev *dev = to_idev(ibcq->device);
+ struct ipath_mmap_info *ip = cq->ip;
+
+ ipath_update_mmap_info(dev, ip, sz, wc);
+
+ /*
+ * Return the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ ret = ib_copy_to_udata(udata, &ip->offset,
+ sizeof(ip->offset));
+ if (ret)
+ goto bail;
+ }
+
+ spin_lock_irq(&dev->pending_lock);
+ if (list_empty(&ip->pending_mmaps))
+ list_add(&ip->pending_mmaps, &dev->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+ }
+
+ ret = 0;
+ goto bail;
+
+bail_unlock:
+ spin_unlock_irq(&cq->lock);
+bail_free:
+ vfree(wc);
+bail:
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _IPATH_DEBUG_H
+#define _IPATH_DEBUG_H
+
+#ifndef _IPATH_DEBUGGING /* debugging enabled or not */
+#define _IPATH_DEBUGGING 1
+#endif
+
+#if _IPATH_DEBUGGING
+
+/*
+ * Mask values for debugging. The scheme allows us to compile out any
+ * of the debug tracing stuff, and if compiled in, to enable or disable
+ * dynamically. This can be set at modprobe time also:
+ * modprobe infinipath.ko infinipath_debug=7
+ */
+
+#define __IPATH_INFO 0x1 /* generic low verbosity stuff */
+#define __IPATH_DBG 0x2 /* generic debug */
+#define __IPATH_TRSAMPLE 0x8 /* generate trace buffer sample entries */
+/* leave some low verbosity spots open */
+#define __IPATH_VERBDBG 0x40 /* very verbose debug */
+#define __IPATH_PKTDBG 0x80 /* print packet data */
+/* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG 0x100
+/* print mmap/fault stuff, not using VDBG any more */
+#define __IPATH_MMDBG 0x200
+#define __IPATH_ERRPKTDBG 0x400
+#define __IPATH_USER_SEND 0x1000 /* use user mode send */
+#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
+#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
+#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
+#define __IPATH_LINKVERBDBG 0x200000 /* very verbose linkchange debug */
+
+#else /* _IPATH_DEBUGGING */
+
+/*
+ * define all of these even with debugging off, for the few places that do
+ * if(infinipath_debug & _IPATH_xyzzy), but in a way that will make the
+ * compiler eliminate the code
+ */
+
+#define __IPATH_INFO 0x0 /* generic low verbosity stuff */
+#define __IPATH_DBG 0x0 /* generic debug */
+#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
+#define __IPATH_VERBDBG 0x0 /* very verbose debug */
+#define __IPATH_PKTDBG 0x0 /* print packet data */
+#define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */
+/* print mmap/fault stuff, not using VDBG any more */
+#define __IPATH_MMDBG 0x0
+#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
+#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
+#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
+#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
+#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
+#define __IPATH_LINKVERBDBG 0x0 /* very verbose linkchange debug */
+
+#endif /* _IPATH_DEBUGGING */
+
+#define __IPATH_VERBOSEDBG __IPATH_VERBDBG
+
+#endif /* _IPATH_DEBUG_H */
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains support for diagnostic functions. It is accessed by
+ * opening the ipath_diag device, normally minor number 129. Diagnostic use
+ * of the InfiniPath chip may render the chip or board unusable until the
+ * driver is unloaded, or in some cases, until the system is rebooted.
+ *
+ * Accesses to the chip through this interface are not similar to going
+ * through the /sys/bus/pci resource mmap interface.
+ */
+
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/export.h>
+#include <asm/uaccess.h>
+
+#include "ipath_kernel.h"
+#include "ipath_common.h"
+
+int ipath_diag_inuse;
+static int diag_set_link;
+
+static int ipath_diag_open(struct inode *in, struct file *fp);
+static int ipath_diag_release(struct inode *in, struct file *fp);
+static ssize_t ipath_diag_read(struct file *fp, char __user *data,
+ size_t count, loff_t *off);
+static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off);
+
+static const struct file_operations diag_file_ops = {
+ .owner = THIS_MODULE,
+ .write = ipath_diag_write,
+ .read = ipath_diag_read,
+ .open = ipath_diag_open,
+ .release = ipath_diag_release,
+ .llseek = default_llseek,
+};
+
+static ssize_t ipath_diagpkt_write(struct file *fp,
+ const char __user *data,
+ size_t count, loff_t *off);
+
+static const struct file_operations diagpkt_file_ops = {
+ .owner = THIS_MODULE,
+ .write = ipath_diagpkt_write,
+ .llseek = noop_llseek,
+};
+
+static atomic_t diagpkt_count = ATOMIC_INIT(0);
+static struct cdev *diagpkt_cdev;
+static struct device *diagpkt_dev;
+
+int ipath_diag_add(struct ipath_devdata *dd)
+{
+ char name[16];
+ int ret = 0;
+
+ if (atomic_inc_return(&diagpkt_count) == 1) {
+ ret = ipath_cdev_init(IPATH_DIAGPKT_MINOR,
+ "ipath_diagpkt", &diagpkt_file_ops,
+ &diagpkt_cdev, &diagpkt_dev);
+
+ if (ret) {
+ ipath_dev_err(dd, "Couldn't create ipath_diagpkt "
+ "device: %d", ret);
+ goto done;
+ }
+ }
+
+ snprintf(name, sizeof(name), "ipath_diag%d", dd->ipath_unit);
+
+ ret = ipath_cdev_init(IPATH_DIAG_MINOR_BASE + dd->ipath_unit, name,
+ &diag_file_ops, &dd->diag_cdev,
+ &dd->diag_dev);
+ if (ret)
+ ipath_dev_err(dd, "Couldn't create %s device: %d",
+ name, ret);
+
+done:
+ return ret;
+}
+
+void ipath_diag_remove(struct ipath_devdata *dd)
+{
+ if (atomic_dec_and_test(&diagpkt_count))
+ ipath_cdev_cleanup(&diagpkt_cdev, &diagpkt_dev);
+
+ ipath_cdev_cleanup(&dd->diag_cdev, &dd->diag_dev);
+}
+
+/**
+ * ipath_read_umem64 - read a 64-bit quantity from the chip into user space
+ * @dd: the infinipath device
+ * @uaddr: the location to store the data in user memory
+ * @caddr: the source chip address (full pointer, not offset)
+ * @count: number of bytes to copy (multiple of 32 bits)
+ *
+ * This function also localizes all chip memory accesses.
+ * The copy should be written such that we read full cacheline packets
+ * from the chip. This is usually used for a single qword
+ *
+ * NOTE: This assumes the chip address is 64-bit aligned.
+ */
+static int ipath_read_umem64(struct ipath_devdata *dd, void __user *uaddr,
+ const void __iomem *caddr, size_t count)
+{
+ const u64 __iomem *reg_addr = caddr;
+ const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
+ int ret;
+
+ /* not very efficient, but it works for now */
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ while (reg_addr < reg_end) {
+ u64 data = readq(reg_addr);
+ if (copy_to_user(uaddr, &data, sizeof(u64))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ reg_addr++;
+ uaddr += sizeof(u64);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/**
+ * ipath_write_umem64 - write a 64-bit quantity to the chip from user space
+ * @dd: the infinipath device
+ * @caddr: the destination chip address (full pointer, not offset)
+ * @uaddr: the source of the data in user memory
+ * @count: the number of bytes to copy (multiple of 32 bits)
+ *
+ * This is usually used for a single qword
+ * NOTE: This assumes the chip address is 64-bit aligned.
+ */
+
+static int ipath_write_umem64(struct ipath_devdata *dd, void __iomem *caddr,
+ const void __user *uaddr, size_t count)
+{
+ u64 __iomem *reg_addr = caddr;
+ const u64 __iomem *reg_end = reg_addr + (count / sizeof(u64));
+ int ret;
+
+ /* not very efficient, but it works for now */
+ if (reg_addr < dd->ipath_kregbase || reg_end > dd->ipath_kregend) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ while (reg_addr < reg_end) {
+ u64 data;
+ if (copy_from_user(&data, uaddr, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ writeq(data, reg_addr);
+
+ reg_addr++;
+ uaddr += sizeof(u64);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/**
+ * ipath_read_umem32 - read a 32-bit quantity from the chip into user space
+ * @dd: the infinipath device
+ * @uaddr: the location to store the data in user memory
+ * @caddr: the source chip address (full pointer, not offset)
+ * @count: number of bytes to copy
+ *
+ * read 32 bit values, not 64 bit; for memories that only
+ * support 32 bit reads; usually a single dword.
+ */
+static int ipath_read_umem32(struct ipath_devdata *dd, void __user *uaddr,
+ const void __iomem *caddr, size_t count)
+{
+ const u32 __iomem *reg_addr = caddr;
+ const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
+ int ret;
+
+ if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
+ reg_end > (u32 __iomem *) dd->ipath_kregend) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ /* not very efficient, but it works for now */
+ while (reg_addr < reg_end) {
+ u32 data = readl(reg_addr);
+ if (copy_to_user(uaddr, &data, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ reg_addr++;
+ uaddr += sizeof(u32);
+
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/**
+ * ipath_write_umem32 - write a 32-bit quantity to the chip from user space
+ * @dd: the infinipath device
+ * @caddr: the destination chip address (full pointer, not offset)
+ * @uaddr: the source of the data in user memory
+ * @count: number of bytes to copy
+ *
+ * write 32 bit values, not 64 bit; for memories that only
+ * support 32 bit write; usually a single dword.
+ */
+
+static int ipath_write_umem32(struct ipath_devdata *dd, void __iomem *caddr,
+ const void __user *uaddr, size_t count)
+{
+ u32 __iomem *reg_addr = caddr;
+ const u32 __iomem *reg_end = reg_addr + (count / sizeof(u32));
+ int ret;
+
+ if (reg_addr < (u32 __iomem *) dd->ipath_kregbase ||
+ reg_end > (u32 __iomem *) dd->ipath_kregend) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ while (reg_addr < reg_end) {
+ u32 data;
+ if (copy_from_user(&data, uaddr, sizeof(data))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ writel(data, reg_addr);
+
+ reg_addr++;
+ uaddr += sizeof(u32);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+static int ipath_diag_open(struct inode *in, struct file *fp)
+{
+ int unit = iminor(in) - IPATH_DIAG_MINOR_BASE;
+ struct ipath_devdata *dd;
+ int ret;
+
+ mutex_lock(&ipath_mutex);
+
+ if (ipath_diag_inuse) {
+ ret = -EBUSY;
+ goto bail;
+ }
+
+ dd = ipath_lookup(unit);
+
+ if (dd == NULL || !(dd->ipath_flags & IPATH_PRESENT) ||
+ !dd->ipath_kregbase) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ fp->private_data = dd;
+ ipath_diag_inuse = -2;
+ diag_set_link = 0;
+ ret = 0;
+
+ /* Only expose a way to reset the device if we
+ make it into diag mode. */
+ ipath_expose_reset(&dd->pcidev->dev);
+
+bail:
+ mutex_unlock(&ipath_mutex);
+
+ return ret;
+}
+
+/**
+ * ipath_diagpkt_write - write an IB packet
+ * @fp: the diag data device file pointer
+ * @data: ipath_diag_pkt structure saying where to get the packet
+ * @count: size of data to write
+ * @off: unused by this code
+ */
+static ssize_t ipath_diagpkt_write(struct file *fp,
+ const char __user *data,
+ size_t count, loff_t *off)
+{
+ u32 __iomem *piobuf;
+ u32 plen, pbufn, maxlen_reserve;
+ struct ipath_diag_pkt odp;
+ struct ipath_diag_xpkt dp;
+ u32 *tmpbuf = NULL;
+ struct ipath_devdata *dd;
+ ssize_t ret = 0;
+ u64 val;
+ u32 l_state, lt_state; /* LinkState, LinkTrainingState */
+
+
+ if (count == sizeof(dp)) {
+ if (copy_from_user(&dp, data, sizeof(dp))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ } else if (count == sizeof(odp)) {
+ if (copy_from_user(&odp, data, sizeof(odp))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ dp.len = odp.len;
+ dp.unit = odp.unit;
+ dp.data = odp.data;
+ dp.pbc_wd = 0;
+ } else {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /* send count must be an exact number of dwords */
+ if (dp.len & 3) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ plen = dp.len >> 2;
+
+ dd = ipath_lookup(dp.unit);
+ if (!dd || !(dd->ipath_flags & IPATH_PRESENT) ||
+ !dd->ipath_kregbase) {
+ ipath_cdbg(VERBOSE, "illegal unit %u for diag data send\n",
+ dp.unit);
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ if (ipath_diag_inuse && !diag_set_link &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ diag_set_link = 1;
+ ipath_cdbg(VERBOSE, "Trying to set to set link active for "
+ "diag pkt\n");
+ ipath_set_linkstate(dd, IPATH_IB_LINKARM);
+ ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
+ }
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ /* no hardware, freeze, etc. */
+ ipath_cdbg(VERBOSE, "unit %u not usable\n", dd->ipath_unit);
+ ret = -ENODEV;
+ goto bail;
+ }
+ /*
+ * Want to skip check for l_state if using custom PBC,
+ * because we might be trying to force an SM packet out.
+ * first-cut, skip _all_ state checking in that case.
+ */
+ val = ipath_ib_state(dd, dd->ipath_lastibcstat);
+ lt_state = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
+ l_state = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+ if (!dp.pbc_wd && (lt_state != INFINIPATH_IBCS_LT_STATE_LINKUP ||
+ (val != dd->ib_init && val != dd->ib_arm &&
+ val != dd->ib_active))) {
+ ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n",
+ dd->ipath_unit, (unsigned long long) val);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /*
+ * need total length before first word written, plus 2 Dwords. One Dword
+ * is for padding so we get the full user data when not aligned on
+ * a word boundary. The other Dword is to make sure we have room for the
+ * ICRC which gets tacked on later.
+ */
+ maxlen_reserve = 2 * sizeof(u32);
+ if (dp.len > dd->ipath_ibmaxlen - maxlen_reserve) {
+ ipath_dbg("Pkt len 0x%x > ibmaxlen %x\n",
+ dp.len, dd->ipath_ibmaxlen);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ plen = sizeof(u32) + dp.len;
+
+ tmpbuf = vmalloc(plen);
+ if (!tmpbuf) {
+ dev_info(&dd->pcidev->dev, "Unable to allocate tmp buffer, "
+ "failing\n");
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ if (copy_from_user(tmpbuf,
+ (const void __user *) (unsigned long) dp.data,
+ dp.len)) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ plen >>= 2; /* in dwords */
+
+ piobuf = ipath_getpiobuf(dd, plen, &pbufn);
+ if (!piobuf) {
+ ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n",
+ dd->ipath_unit);
+ ret = -EBUSY;
+ goto bail;
+ }
+ /* disarm it just to be extra sure */
+ ipath_disarm_piobufs(dd, pbufn, 1);
+
+ if (ipath_debug & __IPATH_PKTDBG)
+ ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n",
+ dd->ipath_unit, plen - 1, pbufn);
+
+ if (dp.pbc_wd == 0)
+ dp.pbc_wd = plen;
+ writeq(dp.pbc_wd, piobuf);
+ /*
+ * Copy all by the trigger word, then flush, so it's written
+ * to chip before trigger word, then write trigger word, then
+ * flush again, so packet is sent.
+ */
+ if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf + 2, tmpbuf, plen - 1);
+ ipath_flush_wc();
+ __raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
+ } else
+ __iowrite32_copy(piobuf + 2, tmpbuf, plen);
+
+ ipath_flush_wc();
+
+ ret = sizeof(dp);
+
+bail:
+ vfree(tmpbuf);
+ return ret;
+}
+
+static int ipath_diag_release(struct inode *in, struct file *fp)
+{
+ mutex_lock(&ipath_mutex);
+ ipath_diag_inuse = 0;
+ fp->private_data = NULL;
+ mutex_unlock(&ipath_mutex);
+ return 0;
+}
+
+static ssize_t ipath_diag_read(struct file *fp, char __user *data,
+ size_t count, loff_t *off)
+{
+ struct ipath_devdata *dd = fp->private_data;
+ void __iomem *kreg_base;
+ ssize_t ret;
+
+ kreg_base = dd->ipath_kregbase;
+
+ if (count == 0)
+ ret = 0;
+ else if ((count % 4) || (*off % 4))
+ /* address or length is not 32-bit aligned, hence invalid */
+ ret = -EINVAL;
+ else if (ipath_diag_inuse < 1 && (*off || count != 8))
+ ret = -EINVAL; /* prevent cat /dev/ipath_diag* */
+ else if ((count % 8) || (*off % 8))
+ /* address or length not 64-bit aligned; do 32-bit reads */
+ ret = ipath_read_umem32(dd, data, kreg_base + *off, count);
+ else
+ ret = ipath_read_umem64(dd, data, kreg_base + *off, count);
+
+ if (ret >= 0) {
+ *off += count;
+ ret = count;
+ if (ipath_diag_inuse == -2)
+ ipath_diag_inuse++;
+ }
+
+ return ret;
+}
+
+static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off)
+{
+ struct ipath_devdata *dd = fp->private_data;
+ void __iomem *kreg_base;
+ ssize_t ret;
+
+ kreg_base = dd->ipath_kregbase;
+
+ if (count == 0)
+ ret = 0;
+ else if ((count % 4) || (*off % 4))
+ /* address or length is not 32-bit aligned, hence invalid */
+ ret = -EINVAL;
+ else if ((ipath_diag_inuse == -1 && (*off || count != 8)) ||
+ ipath_diag_inuse == -2) /* read qw off 0, write qw off 0 */
+ ret = -EINVAL; /* before any other write allowed */
+ else if ((count % 8) || (*off % 8))
+ /* address or length not 64-bit aligned; do 32-bit writes */
+ ret = ipath_write_umem32(dd, kreg_base + *off, data, count);
+ else
+ ret = ipath_write_umem64(dd, kreg_base + *off, data, count);
+
+ if (ret >= 0) {
+ *off += count;
+ ret = count;
+ if (ipath_diag_inuse == -1)
+ ipath_diag_inuse = 1; /* all read/write OK now */
+ }
+
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006 QLogic, Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/scatterlist.h>
+#include <linux/gfp.h>
+#include <rdma/ib_verbs.h>
+
+#include "ipath_verbs.h"
+
+#define BAD_DMA_ADDRESS ((u64) 0)
+
+/*
+ * The following functions implement driver specific replacements
+ * for the ib_dma_*() functions.
+ *
+ * These functions return kernel virtual addresses instead of
+ * device bus addresses since the driver uses the CPU to copy
+ * data instead of using hardware DMA.
+ */
+
+static int ipath_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+ return dma_addr == BAD_DMA_ADDRESS;
+}
+
+static u64 ipath_dma_map_single(struct ib_device *dev,
+ void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+ return (u64) cpu_addr;
+}
+
+static void ipath_dma_unmap_single(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static u64 ipath_dma_map_page(struct ib_device *dev,
+ struct page *page,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ u64 addr;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ if (offset + size > PAGE_SIZE) {
+ addr = BAD_DMA_ADDRESS;
+ goto done;
+ }
+
+ addr = (u64) page_address(page);
+ if (addr)
+ addr += offset;
+ /* TODO: handle highmem pages */
+
+done:
+ return addr;
+}
+
+static void ipath_dma_unmap_page(struct ib_device *dev,
+ u64 addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static int ipath_map_sg(struct ib_device *dev, struct scatterlist *sgl,
+ int nents, enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ u64 addr;
+ int i;
+ int ret = nents;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ for_each_sg(sgl, sg, nents, i) {
+ addr = (u64) page_address(sg_page(sg));
+ /* TODO: handle highmem pages */
+ if (!addr) {
+ ret = 0;
+ break;
+ }
+ sg->dma_address = addr + sg->offset;
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+ sg->dma_length = sg->length;
+#endif
+ }
+ return ret;
+}
+
+static void ipath_unmap_sg(struct ib_device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+static void ipath_sync_single_for_cpu(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void ipath_sync_single_for_device(struct ib_device *dev,
+ u64 addr,
+ size_t size,
+ enum dma_data_direction dir)
+{
+}
+
+static void *ipath_dma_alloc_coherent(struct ib_device *dev, size_t size,
+ u64 *dma_handle, gfp_t flag)
+{
+ struct page *p;
+ void *addr = NULL;
+
+ p = alloc_pages(flag, get_order(size));
+ if (p)
+ addr = page_address(p);
+ if (dma_handle)
+ *dma_handle = (u64) addr;
+ return addr;
+}
+
+static void ipath_dma_free_coherent(struct ib_device *dev, size_t size,
+ void *cpu_addr, u64 dma_handle)
+{
+ free_pages((unsigned long) cpu_addr, get_order(size));
+}
+
+struct ib_dma_mapping_ops ipath_dma_mapping_ops = {
+ .mapping_error = ipath_mapping_error,
+ .map_single = ipath_dma_map_single,
+ .unmap_single = ipath_dma_unmap_single,
+ .map_page = ipath_dma_map_page,
+ .unmap_page = ipath_dma_unmap_page,
+ .map_sg = ipath_map_sg,
+ .unmap_sg = ipath_unmap_sg,
+ .sync_single_for_cpu = ipath_sync_single_for_cpu,
+ .sync_single_for_device = ipath_sync_single_for_device,
+ .alloc_coherent = ipath_dma_alloc_coherent,
+ .free_coherent = ipath_dma_free_coherent
+};
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/bitmap.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#ifdef CONFIG_X86_64
+#include <asm/pat.h>
+#endif
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+
+static void ipath_update_pio_bufs(struct ipath_devdata *);
+
+const char *ipath_get_unit_name(int unit)
+{
+ static char iname[16];
+ snprintf(iname, sizeof iname, "infinipath%u", unit);
+ return iname;
+}
+
+#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
+#define PFX IPATH_DRV_NAME ": "
+
+/*
+ * The size has to be longer than this string, so we can append
+ * board/chip information to it in the init code.
+ */
+const char ib_ipath_version[] = IPATH_IDSTR "\n";
+
+static struct idr unit_table;
+DEFINE_SPINLOCK(ipath_devs_lock);
+LIST_HEAD(ipath_dev_list);
+
+wait_queue_head_t ipath_state_wait;
+
+unsigned ipath_debug = __IPATH_INFO;
+
+module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(debug, "mask for debug prints");
+EXPORT_SYMBOL_GPL(ipath_debug);
+
+unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
+module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
+MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
+
+static unsigned ipath_hol_timeout_ms = 13000;
+module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(hol_timeout_ms,
+ "duration of user app suspension after link failure");
+
+unsigned ipath_linkrecovery = 1;
+module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("QLogic <support@qlogic.com>");
+MODULE_DESCRIPTION("QLogic InfiniPath driver");
+
+/*
+ * Table to translate the LINKTRAININGSTATE portion of
+ * IBCStatus to a human-readable form.
+ */
+const char *ipath_ibcstatus_str[] = {
+ "Disabled",
+ "LinkUp",
+ "PollActive",
+ "PollQuiet",
+ "SleepDelay",
+ "SleepQuiet",
+ "LState6", /* unused */
+ "LState7", /* unused */
+ "CfgDebounce",
+ "CfgRcvfCfg",
+ "CfgWaitRmt",
+ "CfgIdle",
+ "RecovRetrain",
+ "CfgTxRevLane", /* unused before IBA7220 */
+ "RecovWaitRmt",
+ "RecovIdle",
+ /* below were added for IBA7220 */
+ "CfgEnhanced",
+ "CfgTest",
+ "CfgWaitRmtTest",
+ "CfgWaitCfgEnhanced",
+ "SendTS_T",
+ "SendTstIdles",
+ "RcvTS_T",
+ "SendTst_TS1s",
+ "LTState18", "LTState19", "LTState1A", "LTState1B",
+ "LTState1C", "LTState1D", "LTState1E", "LTState1F"
+};
+
+static void ipath_remove_one(struct pci_dev *);
+static int ipath_init_one(struct pci_dev *, const struct pci_device_id *);
+
+/* Only needed for registration, nothing else needs this info */
+#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
+#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
+
+/* Number of seconds before our card status check... */
+#define STATUS_TIMEOUT 60
+
+static const struct pci_device_id ipath_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
+
+static struct pci_driver ipath_driver = {
+ .name = IPATH_DRV_NAME,
+ .probe = ipath_init_one,
+ .remove = ipath_remove_one,
+ .id_table = ipath_pci_tbl,
+ .driver = {
+ .groups = ipath_driver_attr_groups,
+ },
+};
+
+static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
+ u32 *bar0, u32 *bar1)
+{
+ int ret;
+
+ ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+ if (ret)
+ ipath_dev_err(dd, "failed to read bar0 before enable: "
+ "error %d\n", -ret);
+
+ ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1);
+ if (ret)
+ ipath_dev_err(dd, "failed to read bar1 before enable: "
+ "error %d\n", -ret);
+
+ ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1);
+}
+
+static void ipath_free_devdata(struct pci_dev *pdev,
+ struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ pci_set_drvdata(pdev, NULL);
+
+ if (dd->ipath_unit != -1) {
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+ idr_remove(&unit_table, dd->ipath_unit);
+ list_del(&dd->ipath_list);
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ }
+ vfree(dd);
+}
+
+static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
+{
+ unsigned long flags;
+ struct ipath_devdata *dd;
+ int ret;
+
+ dd = vzalloc(sizeof(*dd));
+ if (!dd) {
+ dd = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+ dd->ipath_unit = -1;
+
+ idr_preload(GFP_KERNEL);
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ ret = idr_alloc(&unit_table, dd, 0, 0, GFP_NOWAIT);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not allocate unit ID: error %d\n", -ret);
+ ipath_free_devdata(pdev, dd);
+ dd = ERR_PTR(ret);
+ goto bail_unlock;
+ }
+ dd->ipath_unit = ret;
+
+ dd->pcidev = pdev;
+ pci_set_drvdata(pdev, dd);
+
+ list_add(&dd->ipath_list, &ipath_dev_list);
+
+bail_unlock:
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ idr_preload_end();
+bail:
+ return dd;
+}
+
+static inline struct ipath_devdata *__ipath_lookup(int unit)
+{
+ return idr_find(&unit_table, unit);
+}
+
+struct ipath_devdata *ipath_lookup(int unit)
+{
+ struct ipath_devdata *dd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+ dd = __ipath_lookup(unit);
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+ return dd;
+}
+
+int ipath_count_units(int *npresentp, int *nupp, int *maxportsp)
+{
+ int nunits, npresent, nup;
+ struct ipath_devdata *dd;
+ unsigned long flags;
+ int maxports;
+
+ nunits = npresent = nup = maxports = 0;
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
+ nunits++;
+ if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase)
+ npresent++;
+ if (dd->ipath_lid &&
+ !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN
+ | IPATH_LINKUNK)))
+ nup++;
+ if (dd->ipath_cfgports > maxports)
+ maxports = dd->ipath_cfgports;
+ }
+
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+ if (npresentp)
+ *npresentp = npresent;
+ if (nupp)
+ *nupp = nup;
+ if (maxportsp)
+ *maxportsp = maxports;
+
+ return nunits;
+}
+
+/*
+ * These next two routines are placeholders in case we don't have per-arch
+ * code for controlling write combining. If explicit control of write
+ * combining is not available, performance will probably be awful.
+ */
+
+int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd)
+{
+ return -EOPNOTSUPP;
+}
+
+void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd)
+{
+}
+
+/*
+ * Perform a PIO buffer bandwidth write test, to verify proper system
+ * configuration. Even when all the setup calls work, occasionally
+ * BIOS or other issues can prevent write combining from working, or
+ * can cause other bandwidth problems to the chip.
+ *
+ * This test simply writes the same buffer over and over again, and
+ * measures close to the peak bandwidth to the chip (not testing
+ * data bandwidth to the wire). On chips that use an address-based
+ * trigger to send packets to the wire, this is easy. On chips that
+ * use a count to trigger, we want to make sure that the packet doesn't
+ * go out on the wire, or trigger flow control checks.
+ */
+static void ipath_verify_pioperf(struct ipath_devdata *dd)
+{
+ u32 pbnum, cnt, lcnt;
+ u32 __iomem *piobuf;
+ u32 *addr;
+ u64 msecs, emsecs;
+
+ piobuf = ipath_getpiobuf(dd, 0, &pbnum);
+ if (!piobuf) {
+ dev_info(&dd->pcidev->dev,
+ "No PIObufs for checking perf, skipping\n");
+ return;
+ }
+
+ /*
+ * Enough to give us a reasonable test, less than piobuf size, and
+ * likely multiple of store buffer length.
+ */
+ cnt = 1024;
+
+ addr = vmalloc(cnt);
+ if (!addr) {
+ dev_info(&dd->pcidev->dev,
+ "Couldn't get memory for checking PIO perf,"
+ " skipping\n");
+ goto done;
+ }
+
+ preempt_disable(); /* we want reasonably accurate elapsed time */
+ msecs = 1 + jiffies_to_msecs(jiffies);
+ for (lcnt = 0; lcnt < 10000U; lcnt++) {
+ /* wait until we cross msec boundary */
+ if (jiffies_to_msecs(jiffies) >= msecs)
+ break;
+ udelay(1);
+ }
+
+ ipath_disable_armlaunch(dd);
+
+ /*
+ * length 0, no dwords actually sent, and mark as VL15
+ * on chips where that may matter (due to IB flowcontrol)
+ */
+ if ((dd->ipath_flags & IPATH_HAS_PBC_CNT))
+ writeq(1UL << 63, piobuf);
+ else
+ writeq(0, piobuf);
+ ipath_flush_wc();
+
+ /*
+ * this is only roughly accurate, since even with preempt we
+ * still take interrupts that could take a while. Running for
+ * >= 5 msec seems to get us "close enough" to accurate values
+ */
+ msecs = jiffies_to_msecs(jiffies);
+ for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
+ __iowrite32_copy(piobuf + 64, addr, cnt >> 2);
+ emsecs = jiffies_to_msecs(jiffies) - msecs;
+ }
+
+ /* 1 GiB/sec, slightly over IB SDR line rate */
+ if (lcnt < (emsecs * 1024U))
+ ipath_dev_err(dd,
+ "Performance problem: bandwidth to PIO buffers is "
+ "only %u MiB/sec\n",
+ lcnt / (u32) emsecs);
+ else
+ ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n",
+ lcnt / (u32) emsecs);
+
+ preempt_enable();
+
+ vfree(addr);
+
+done:
+ /* disarm piobuf, so it's available again */
+ ipath_disarm_piobufs(dd, pbnum, 1);
+ ipath_enable_armlaunch(dd);
+}
+
+static void cleanup_device(struct ipath_devdata *dd);
+
+static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret, len, j;
+ struct ipath_devdata *dd;
+ unsigned long long addr;
+ u32 bar0 = 0, bar1 = 0;
+
+#ifdef CONFIG_X86_64
+ if (pat_enabled()) {
+ pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n");
+ ret = -ENODEV;
+ goto bail;
+ }
+#endif
+
+ dd = ipath_alloc_devdata(pdev);
+ if (IS_ERR(dd)) {
+ ret = PTR_ERR(dd);
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not allocate devdata: error %d\n", -ret);
+ goto bail;
+ }
+
+ ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);
+
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ /* This can happen iff:
+ *
+ * We did a chip reset, and then failed to reprogram the
+ * BAR, or the chip reset due to an internal error. We then
+ * unloaded the driver and reloaded it.
+ *
+ * Both reset cases set the BAR back to initial state. For
+ * the latter case, the AER sticky error bit at offset 0x718
+ * should be set, but the Linux kernel doesn't yet know
+ * about that, it appears. If the original BAR was retained
+ * in the kernel data structures, this may be OK.
+ */
+ ipath_dev_err(dd, "enable unit %d failed: error %d\n",
+ dd->ipath_unit, -ret);
+ goto bail_devdata;
+ }
+ addr = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x "
+ "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
+ ent->device, ent->driver_data);
+
+ read_bars(dd, pdev, &bar0, &bar1);
+
+ if (!bar1 && !(bar0 & ~0xf)) {
+ if (addr) {
+ dev_info(&pdev->dev, "BAR is 0 (probable RESET), "
+ "rewriting as %llx\n", addr);
+ ret = pci_write_config_dword(
+ pdev, PCI_BASE_ADDRESS_0, addr);
+ if (ret) {
+ ipath_dev_err(dd, "rewrite of BAR0 "
+ "failed: err %d\n", -ret);
+ goto bail_disable;
+ }
+ ret = pci_write_config_dword(
+ pdev, PCI_BASE_ADDRESS_1, addr >> 32);
+ if (ret) {
+ ipath_dev_err(dd, "rewrite of BAR1 "
+ "failed: err %d\n", -ret);
+ goto bail_disable;
+ }
+ } else {
+ ipath_dev_err(dd, "BAR is 0 (probable RESET), "
+ "not usable until reboot\n");
+ ret = -ENODEV;
+ goto bail_disable;
+ }
+ }
+
+ ret = pci_request_regions(pdev, IPATH_DRV_NAME);
+ if (ret) {
+ dev_info(&pdev->dev, "pci_request_regions unit %u fails: "
+ "err %d\n", dd->ipath_unit, -ret);
+ goto bail_disable;
+ }
+
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret) {
+ /*
+ * if the 64 bit setup fails, try 32 bit. Some systems
+ * do not setup 64 bit maps on systems with 2GB or less
+ * memory installed.
+ */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_info(&pdev->dev,
+ "Unable to set DMA mask for unit %u: %d\n",
+ dd->ipath_unit, ret);
+ goto bail_regions;
+ }
+ else {
+ ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
+
+ }
+ }
+ else {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret)
+ dev_info(&pdev->dev,
+ "Unable to set DMA consistent mask "
+ "for unit %u: %d\n",
+ dd->ipath_unit, ret);
+ }
+
+ pci_set_master(pdev);
+
+ /*
+ * Save BARs to rewrite after device reset. Save all 64 bits of
+ * BAR, just in case.
+ */
+ dd->ipath_pcibar0 = addr;
+ dd->ipath_pcibar1 = addr >> 32;
+ dd->ipath_deviceid = ent->device; /* save for later use */
+ dd->ipath_vendorid = ent->vendor;
+
+ /* setup the chip-specific functions, as early as possible. */
+ switch (ent->device) {
+ case PCI_DEVICE_ID_INFINIPATH_HT:
+ ipath_init_iba6110_funcs(dd);
+ break;
+
+ default:
+ ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
+ "failing\n", ent->device);
+ return -ENODEV;
+ }
+
+ for (j = 0; j < 6; j++) {
+ if (!pdev->resource[j].start)
+ continue;
+ ipath_cdbg(VERBOSE, "BAR %d %pR, len %llx\n",
+ j, &pdev->resource[j],
+ (unsigned long long)pci_resource_len(pdev, j));
+ }
+
+ if (!addr) {
+ ipath_dev_err(dd, "No valid address in BAR 0!\n");
+ ret = -ENODEV;
+ goto bail_regions;
+ }
+
+ dd->ipath_pcirev = pdev->revision;
+
+#if defined(__powerpc__)
+ /* There isn't a generic way to specify writethrough mappings */
+ dd->ipath_kregbase = __ioremap(addr, len,
+ (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
+#else
+ /* XXX: split this properly to enable on PAT */
+ dd->ipath_kregbase = ioremap_nocache(addr, len);
+#endif
+
+ if (!dd->ipath_kregbase) {
+ ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
+ addr);
+ ret = -ENOMEM;
+ goto bail_iounmap;
+ }
+ dd->ipath_kregend = (u64 __iomem *)
+ ((void __iomem *)dd->ipath_kregbase + len);
+ dd->ipath_physaddr = addr; /* used for io_remap, etc. */
+ /* for user mmap */
+ ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
+ addr, dd->ipath_kregbase);
+
+ if (dd->ipath_f_bus(dd, pdev))
+ ipath_dev_err(dd, "Failed to setup config space; "
+ "continuing anyway\n");
+
+ /*
+ * set up our interrupt handler; IRQF_SHARED probably not needed,
+ * since MSI interrupts shouldn't be shared but won't hurt for now.
+ * check 0 irq after we return from chip-specific bus setup, since
+ * that can affect this due to setup
+ */
+ if (!dd->ipath_irq)
+ ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
+ "work\n");
+ else {
+ ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
+ IPATH_DRV_NAME, dd);
+ if (ret) {
+ ipath_dev_err(dd, "Couldn't setup irq handler, "
+ "irq=%d: %d\n", dd->ipath_irq, ret);
+ goto bail_iounmap;
+ }
+ }
+
+ ret = ipath_init_chip(dd, 0); /* do the chip-specific init */
+ if (ret)
+ goto bail_irqsetup;
+
+ ret = ipath_enable_wc(dd);
+
+ if (ret)
+ ret = 0;
+
+ ipath_verify_pioperf(dd);
+
+ ipath_device_create_group(&pdev->dev, dd);
+ ipathfs_add_device(dd);
+ ipath_user_add(dd);
+ ipath_diag_add(dd);
+ ipath_register_ib_device(dd);
+
+ goto bail;
+
+bail_irqsetup:
+ cleanup_device(dd);
+
+ if (dd->ipath_irq)
+ dd->ipath_f_free_irq(dd);
+
+ if (dd->ipath_f_cleanup)
+ dd->ipath_f_cleanup(dd);
+
+bail_iounmap:
+ iounmap((volatile void __iomem *) dd->ipath_kregbase);
+
+bail_regions:
+ pci_release_regions(pdev);
+
+bail_disable:
+ pci_disable_device(pdev);
+
+bail_devdata:
+ ipath_free_devdata(pdev, dd);
+
+bail:
+ return ret;
+}
+
+static void cleanup_device(struct ipath_devdata *dd)
+{
+ int port;
+ struct ipath_portdata **tmp;
+ unsigned long flags;
+
+ if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
+ /* can't do anything more with chip; needs re-init */
+ *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
+ if (dd->ipath_kregbase) {
+ /*
+ * if we haven't already cleaned up before these are
+ * to ensure any register reads/writes "fail" until
+ * re-init
+ */
+ dd->ipath_kregbase = NULL;
+ dd->ipath_uregbase = 0;
+ dd->ipath_sregbase = 0;
+ dd->ipath_cregbase = 0;
+ dd->ipath_kregsize = 0;
+ }
+ ipath_disable_wc(dd);
+ }
+
+ if (dd->ipath_spectriggerhit)
+ dev_info(&dd->pcidev->dev, "%lu special trigger hits\n",
+ dd->ipath_spectriggerhit);
+
+ if (dd->ipath_pioavailregs_dma) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *) dd->ipath_pioavailregs_dma,
+ dd->ipath_pioavailregs_phys);
+ dd->ipath_pioavailregs_dma = NULL;
+ }
+ if (dd->ipath_dummy_hdrq) {
+ dma_free_coherent(&dd->pcidev->dev,
+ dd->ipath_pd[0]->port_rcvhdrq_size,
+ dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
+ dd->ipath_dummy_hdrq = NULL;
+ }
+
+ if (dd->ipath_pageshadow) {
+ struct page **tmpp = dd->ipath_pageshadow;
+ dma_addr_t *tmpd = dd->ipath_physshadow;
+ int i, cnt = 0;
+
+ ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
+ "locked\n");
+ for (port = 0; port < dd->ipath_cfgports; port++) {
+ int port_tidbase = port * dd->ipath_rcvtidcnt;
+ int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
+ for (i = port_tidbase; i < maxtid; i++) {
+ if (!tmpp[i])
+ continue;
+ pci_unmap_page(dd->pcidev, tmpd[i],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ipath_release_user_pages(&tmpp[i], 1);
+ tmpp[i] = NULL;
+ cnt++;
+ }
+ }
+ if (cnt) {
+ ipath_stats.sps_pageunlocks += cnt;
+ ipath_cdbg(VERBOSE, "There were still %u expTID "
+ "entries locked\n", cnt);
+ }
+ if (ipath_stats.sps_pagelocks ||
+ ipath_stats.sps_pageunlocks)
+ ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
+ "unlocked via ipath_m{un}lock\n",
+ (unsigned long long)
+ ipath_stats.sps_pagelocks,
+ (unsigned long long)
+ ipath_stats.sps_pageunlocks);
+
+ ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
+ dd->ipath_pageshadow);
+ tmpp = dd->ipath_pageshadow;
+ dd->ipath_pageshadow = NULL;
+ vfree(tmpp);
+
+ dd->ipath_egrtidbase = NULL;
+ }
+
+ /*
+ * free any resources still in use (usually just kernel ports)
+ * at unload; we do for portcnt, because that's what we allocate.
+ * We acquire lock to be really paranoid that ipath_pd isn't being
+ * accessed from some interrupt-related code (that should not happen,
+ * but best to be sure).
+ */
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ tmp = dd->ipath_pd;
+ dd->ipath_pd = NULL;
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ for (port = 0; port < dd->ipath_portcnt; port++) {
+ struct ipath_portdata *pd = tmp[port];
+ tmp[port] = NULL; /* debugging paranoia */
+ ipath_free_pddata(dd, pd);
+ }
+ kfree(tmp);
+}
+
+static void ipath_remove_one(struct pci_dev *pdev)
+{
+ struct ipath_devdata *dd = pci_get_drvdata(pdev);
+
+ ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);
+
+ /*
+ * disable the IB link early, to be sure no new packets arrive, which
+ * complicates the shutdown process
+ */
+ ipath_shutdown_device(dd);
+
+ flush_workqueue(ib_wq);
+
+ if (dd->verbs_dev)
+ ipath_unregister_ib_device(dd->verbs_dev);
+
+ ipath_diag_remove(dd);
+ ipath_user_remove(dd);
+ ipathfs_remove_device(dd);
+ ipath_device_remove_group(&pdev->dev, dd);
+
+ ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
+ "unit %u\n", dd, (u32) dd->ipath_unit);
+
+ cleanup_device(dd);
+
+ /*
+ * turn off rcv, send, and interrupts for all ports, all drivers
+ * should also hard reset the chip here?
+ * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
+ * for all versions of the driver, if they were allocated
+ */
+ if (dd->ipath_irq) {
+ ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+ dd->ipath_unit, dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
+ } else
+ ipath_dbg("irq is 0, not doing free_irq "
+ "for unit %u\n", dd->ipath_unit);
+ /*
+ * we check for NULL here, because it's outside
+ * the kregbase check, and we need to call it
+ * after the free_irq. Thus it's possible that
+ * the function pointers were never initialized.
+ */
+ if (dd->ipath_f_cleanup)
+ /* clean up chip-specific stuff */
+ dd->ipath_f_cleanup(dd);
+
+ ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
+ iounmap((volatile void __iomem *) dd->ipath_kregbase);
+ pci_release_regions(pdev);
+ ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
+ pci_disable_device(pdev);
+
+ ipath_free_devdata(pdev, dd);
+}
+
+/* general driver use */
+DEFINE_MUTEX(ipath_mutex);
+
+static DEFINE_SPINLOCK(ipath_pioavail_lock);
+
+/**
+ * ipath_disarm_piobufs - cancel a range of PIO buffers
+ * @dd: the infinipath device
+ * @first: the first PIO buffer to cancel
+ * @cnt: the number of PIO buffers to cancel
+ *
+ * cancel a range of PIO buffers, used when they might be armed, but
+ * not triggered. Used at init to ensure buffer state, and also user
+ * process close, in case it died while writing to a PIO buffer
+ * Also after errors.
+ */
+void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first,
+ unsigned cnt)
+{
+ unsigned i, last = first + cnt;
+ unsigned long flags;
+
+ ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first);
+ for (i = first; i < last; i++) {
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ /*
+ * The disarm-related bits are write-only, so it
+ * is ok to OR them in with our copy of sendctrl
+ * while we hold the lock.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl | INFINIPATH_S_DISARM |
+ (i << INFINIPATH_S_DISARMPIOBUF_SHIFT));
+ /* can't disarm bufs back-to-back per iba7220 spec */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+ /* on some older chips, update may not happen after cancel */
+ ipath_force_pio_avail_update(dd);
+}
+
+/**
+ * ipath_wait_linkstate - wait for an IB link state change to occur
+ * @dd: the infinipath device
+ * @state: the state to wait for
+ * @msecs: the number of milliseconds to wait
+ *
+ * wait up to msecs milliseconds for IB link state change to occur for
+ * now, take the easy polling route. Currently used only by
+ * ipath_set_linkstate. Returns 0 if state reached, otherwise
+ * -ETIMEDOUT state can have multiple states set, for any of several
+ * transitions.
+ */
+int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
+{
+ dd->ipath_state_wanted = state;
+ wait_event_interruptible_timeout(ipath_state_wait,
+ (dd->ipath_flags & state),
+ msecs_to_jiffies(msecs));
+ dd->ipath_state_wanted = 0;
+
+ if (!(dd->ipath_flags & state)) {
+ u64 val;
+ ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
+ " ms\n",
+ /* test INIT ahead of DOWN, both can be set */
+ (state & IPATH_LINKINIT) ? "INIT" :
+ ((state & IPATH_LINKDOWN) ? "DOWN" :
+ ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
+ msecs);
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n",
+ (unsigned long long) ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_ibcctrl),
+ (unsigned long long) val,
+ ipath_ibcstatus_str[val & dd->ibcs_lts_mask]);
+ }
+ return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
+}
+
+static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
+ char *buf, size_t blen)
+{
+ static const struct {
+ ipath_err_t err;
+ const char *msg;
+ } errs[] = {
+ { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
+ { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
+ { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
+ { INFINIPATH_E_SDMABASE, "SDmaBase" },
+ { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
+ { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
+ { INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
+ { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
+ { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
+ { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
+ { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
+ { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
+ };
+ int i;
+ int expected;
+ size_t bidx = 0;
+
+ for (i = 0; i < ARRAY_SIZE(errs); i++) {
+ expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
+ test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ if ((err & errs[i].err) && !expected)
+ bidx += snprintf(buf + bidx, blen - bidx,
+ "%s ", errs[i].msg);
+ }
+}
+
+/*
+ * Decode the error status into strings, deciding whether to always
+ * print * it or not depending on "normal packet errors" vs everything
+ * else. Return 1 if "real" errors, otherwise 0 if only packet
+ * errors, so caller can decide what to print with the string.
+ */
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+ ipath_err_t err)
+{
+ int iserr = 1;
+ *buf = '\0';
+ if (err & INFINIPATH_E_PKTERRS) {
+ if (!(err & ~INFINIPATH_E_PKTERRS))
+ iserr = 0; // if only packet errors.
+ if (ipath_debug & __IPATH_ERRPKTDBG) {
+ if (err & INFINIPATH_E_REBP)
+ strlcat(buf, "EBP ", blen);
+ if (err & INFINIPATH_E_RVCRC)
+ strlcat(buf, "VCRC ", blen);
+ if (err & INFINIPATH_E_RICRC) {
+ strlcat(buf, "CRC ", blen);
+ // clear for check below, so only once
+ err &= INFINIPATH_E_RICRC;
+ }
+ if (err & INFINIPATH_E_RSHORTPKTLEN)
+ strlcat(buf, "rshortpktlen ", blen);
+ if (err & INFINIPATH_E_SDROPPEDDATAPKT)
+ strlcat(buf, "sdroppeddatapkt ", blen);
+ if (err & INFINIPATH_E_SPKTLEN)
+ strlcat(buf, "spktlen ", blen);
+ }
+ if ((err & INFINIPATH_E_RICRC) &&
+ !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP)))
+ strlcat(buf, "CRC ", blen);
+ if (!iserr)
+ goto done;
+ }
+ if (err & INFINIPATH_E_RHDRLEN)
+ strlcat(buf, "rhdrlen ", blen);
+ if (err & INFINIPATH_E_RBADTID)
+ strlcat(buf, "rbadtid ", blen);
+ if (err & INFINIPATH_E_RBADVERSION)
+ strlcat(buf, "rbadversion ", blen);
+ if (err & INFINIPATH_E_RHDR)
+ strlcat(buf, "rhdr ", blen);
+ if (err & INFINIPATH_E_SENDSPECIALTRIGGER)
+ strlcat(buf, "sendspecialtrigger ", blen);
+ if (err & INFINIPATH_E_RLONGPKTLEN)
+ strlcat(buf, "rlongpktlen ", blen);
+ if (err & INFINIPATH_E_RMAXPKTLEN)
+ strlcat(buf, "rmaxpktlen ", blen);
+ if (err & INFINIPATH_E_RMINPKTLEN)
+ strlcat(buf, "rminpktlen ", blen);
+ if (err & INFINIPATH_E_SMINPKTLEN)
+ strlcat(buf, "sminpktlen ", blen);
+ if (err & INFINIPATH_E_RFORMATERR)
+ strlcat(buf, "rformaterr ", blen);
+ if (err & INFINIPATH_E_RUNSUPVL)
+ strlcat(buf, "runsupvl ", blen);
+ if (err & INFINIPATH_E_RUNEXPCHAR)
+ strlcat(buf, "runexpchar ", blen);
+ if (err & INFINIPATH_E_RIBFLOW)
+ strlcat(buf, "ribflow ", blen);
+ if (err & INFINIPATH_E_SUNDERRUN)
+ strlcat(buf, "sunderrun ", blen);
+ if (err & INFINIPATH_E_SPIOARMLAUNCH)
+ strlcat(buf, "spioarmlaunch ", blen);
+ if (err & INFINIPATH_E_SUNEXPERRPKTNUM)
+ strlcat(buf, "sunexperrpktnum ", blen);
+ if (err & INFINIPATH_E_SDROPPEDSMPPKT)
+ strlcat(buf, "sdroppedsmppkt ", blen);
+ if (err & INFINIPATH_E_SMAXPKTLEN)
+ strlcat(buf, "smaxpktlen ", blen);
+ if (err & INFINIPATH_E_SUNSUPVL)
+ strlcat(buf, "sunsupVL ", blen);
+ if (err & INFINIPATH_E_INVALIDADDR)
+ strlcat(buf, "invalidaddr ", blen);
+ if (err & INFINIPATH_E_RRCVEGRFULL)
+ strlcat(buf, "rcvegrfull ", blen);
+ if (err & INFINIPATH_E_RRCVHDRFULL)
+ strlcat(buf, "rcvhdrfull ", blen);
+ if (err & INFINIPATH_E_IBSTATUSCHANGED)
+ strlcat(buf, "ibcstatuschg ", blen);
+ if (err & INFINIPATH_E_RIBLOSTLINK)
+ strlcat(buf, "riblostlink ", blen);
+ if (err & INFINIPATH_E_HARDWARE)
+ strlcat(buf, "hardware ", blen);
+ if (err & INFINIPATH_E_RESET)
+ strlcat(buf, "reset ", blen);
+ if (err & INFINIPATH_E_SDMAERRS)
+ decode_sdma_errs(dd, err, buf, blen);
+ if (err & INFINIPATH_E_INVALIDEEPCMD)
+ strlcat(buf, "invalideepromcmd ", blen);
+done:
+ return iserr;
+}
+
+/**
+ * get_rhf_errstring - decode RHF errors
+ * @err: the err number
+ * @msg: the output buffer
+ * @len: the length of the output buffer
+ *
+ * only used one place now, may want more later
+ */
+static void get_rhf_errstring(u32 err, char *msg, size_t len)
+{
+ /* if no errors, and so don't need to check what's first */
+ *msg = '\0';
+
+ if (err & INFINIPATH_RHF_H_ICRCERR)
+ strlcat(msg, "icrcerr ", len);
+ if (err & INFINIPATH_RHF_H_VCRCERR)
+ strlcat(msg, "vcrcerr ", len);
+ if (err & INFINIPATH_RHF_H_PARITYERR)
+ strlcat(msg, "parityerr ", len);
+ if (err & INFINIPATH_RHF_H_LENERR)
+ strlcat(msg, "lenerr ", len);
+ if (err & INFINIPATH_RHF_H_MTUERR)
+ strlcat(msg, "mtuerr ", len);
+ if (err & INFINIPATH_RHF_H_IHDRERR)
+ /* infinipath hdr checksum error */
+ strlcat(msg, "ipathhdrerr ", len);
+ if (err & INFINIPATH_RHF_H_TIDERR)
+ strlcat(msg, "tiderr ", len);
+ if (err & INFINIPATH_RHF_H_MKERR)
+ /* bad port, offset, etc. */
+ strlcat(msg, "invalid ipathhdr ", len);
+ if (err & INFINIPATH_RHF_H_IBERR)
+ strlcat(msg, "iberr ", len);
+ if (err & INFINIPATH_RHF_L_SWA)
+ strlcat(msg, "swA ", len);
+ if (err & INFINIPATH_RHF_L_SWB)
+ strlcat(msg, "swB ", len);
+}
+
+/**
+ * ipath_get_egrbuf - get an eager buffer
+ * @dd: the infinipath device
+ * @bufnum: the eager buffer to get
+ *
+ * must only be called if ipath_pd[port] is known to be allocated
+ */
+static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum)
+{
+ return dd->ipath_port0_skbinfo ?
+ (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
+}
+
+/**
+ * ipath_alloc_skb - allocate an skb and buffer with possible constraints
+ * @dd: the infinipath device
+ * @gfp_mask: the sk_buff SFP mask
+ */
+struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd,
+ gfp_t gfp_mask)
+{
+ struct sk_buff *skb;
+ u32 len;
+
+ /*
+ * Only fully supported way to handle this is to allocate lots
+ * extra, align as needed, and then do skb_reserve(). That wastes
+ * a lot of memory... I'll have to hack this into infinipath_copy
+ * also.
+ */
+
+ /*
+ * We need 2 extra bytes for ipath_ether data sent in the
+ * key header. In order to keep everything dword aligned,
+ * we'll reserve 4 bytes.
+ */
+ len = dd->ipath_ibmaxlen + 4;
+
+ if (dd->ipath_flags & IPATH_4BYTE_TID) {
+ /* We need a 2KB multiple alignment, and there is no way
+ * to do it except to allocate extra and then skb_reserve
+ * enough to bring it up to the right alignment.
+ */
+ len += 2047;
+ }
+
+ skb = __dev_alloc_skb(len, gfp_mask);
+ if (!skb) {
+ ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
+ len);
+ goto bail;
+ }
+
+ skb_reserve(skb, 4);
+
+ if (dd->ipath_flags & IPATH_4BYTE_TID) {
+ u32 una = (unsigned long)skb->data & 2047;
+ if (una)
+ skb_reserve(skb, 2048 - una);
+ }
+
+bail:
+ return skb;
+}
+
+static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
+ u32 eflags,
+ u32 l,
+ u32 etail,
+ __le32 *rhf_addr,
+ struct ipath_message_header *hdr)
+{
+ char emsg[128];
+
+ get_rhf_errstring(eflags, emsg, sizeof emsg);
+ ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
+ "tlen=%x opcode=%x egridx=%x: %s\n",
+ eflags, l,
+ ipath_hdrget_rcv_type(rhf_addr),
+ ipath_hdrget_length_in_bytes(rhf_addr),
+ be32_to_cpu(hdr->bth[0]) >> 24,
+ etail, emsg);
+
+ /* Count local link integrity errors. */
+ if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) {
+ u8 n = (dd->ipath_ibcctrl >>
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
+
+ if (++dd->ipath_lli_counter > n) {
+ dd->ipath_lli_counter = 0;
+ dd->ipath_lli_errors++;
+ }
+ }
+}
+
+/*
+ * ipath_kreceive - receive a packet
+ * @pd: the infinipath port
+ *
+ * called from interrupt handler for errors or receive interrupt
+ */
+void ipath_kreceive(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ __le32 *rhf_addr;
+ void *ebuf;
+ const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
+ const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
+ u32 etail = -1, l, hdrqtail;
+ struct ipath_message_header *hdr;
+ u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0;
+ static u64 totcalls; /* stats, may eventually remove */
+ int last;
+
+ l = pd->port_head;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (seq != pd->port_seq_cnt)
+ goto bail;
+ hdrqtail = 0;
+ } else {
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+ if (l == hdrqtail)
+ goto bail;
+ smp_rmb();
+ }
+
+reloop:
+ for (last = 0, i = 1; !last; i += !last) {
+ hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
+ eflags = ipath_hdrget_err_flags(rhf_addr);
+ etype = ipath_hdrget_rcv_type(rhf_addr);
+ /* total length */
+ tlen = ipath_hdrget_length_in_bytes(rhf_addr);
+ ebuf = NULL;
+ if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ?
+ ipath_hdrget_use_egr_buf(rhf_addr) :
+ (etype != RCVHQ_RCV_TYPE_EXPECTED)) {
+ /*
+ * It turns out that the chip uses an eager buffer
+ * for all non-expected packets, whether it "needs"
+ * one or not. So always get the index, but don't
+ * set ebuf (so we try to copy data) unless the
+ * length requires it.
+ */
+ etail = ipath_hdrget_index(rhf_addr);
+ updegr = 1;
+ if (tlen > sizeof(*hdr) ||
+ etype == RCVHQ_RCV_TYPE_NON_KD)
+ ebuf = ipath_get_egrbuf(dd, etail);
+ }
+
+ /*
+ * both tiderr and ipathhdrerr are set for all plain IB
+ * packets; only ipathhdrerr should be set.
+ */
+
+ if (etype != RCVHQ_RCV_TYPE_NON_KD &&
+ etype != RCVHQ_RCV_TYPE_ERROR &&
+ ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) !=
+ IPS_PROTO_VERSION)
+ ipath_cdbg(PKT, "Bad InfiniPath protocol version "
+ "%x\n", etype);
+
+ if (unlikely(eflags))
+ ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr);
+ else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
+ ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen);
+ if (dd->ipath_lli_counter)
+ dd->ipath_lli_counter--;
+ } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
+ u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24;
+ u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff;
+ ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
+ "qp=%x), len %x; ignored\n",
+ etype, opcode, qp, tlen);
+ }
+ else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
+ ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
+ be32_to_cpu(hdr->bth[0]) >> 24);
+ else {
+ /*
+ * error packet, type of error unknown.
+ * Probably type 3, but we don't know, so don't
+ * even try to print the opcode, etc.
+ * Usually caused by a "bad packet", that has no
+ * BTH, when the LRH says it should.
+ */
+ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
+ " %x, len %x hdrq+%x rhf: %Lx\n",
+ etail, tlen, l, (unsigned long long)
+ le64_to_cpu(*(__le64 *) rhf_addr));
+ if (ipath_debug & __IPATH_ERRPKTDBG) {
+ u32 j, *d, dw = rsize-2;
+ if (rsize > (tlen>>2))
+ dw = tlen>>2;
+ d = (u32 *)hdr;
+ printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n",
+ dw);
+ for (j = 0; j < dw; j++)
+ printk(KERN_DEBUG "%8x%s", d[j],
+ (j%8) == 7 ? "\n" : " ");
+ printk(KERN_DEBUG ".\n");
+ }
+ }
+ l += rsize;
+ if (l >= maxcnt)
+ l = 0;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (++pd->port_seq_cnt > 13)
+ pd->port_seq_cnt = 1;
+ if (seq != pd->port_seq_cnt)
+ last = 1;
+ } else if (l == hdrqtail)
+ last = 1;
+ /*
+ * update head regs on last packet, and every 16 packets.
+ * Reduce bus traffic, while still trying to prevent
+ * rcvhdrq overflows, for when the queue is nearly full
+ */
+ if (last || !(i & 0xf)) {
+ u64 lval = l;
+
+ /* request IBA6120 and 7220 interrupt only on last */
+ if (last)
+ lval |= dd->ipath_rhdrhead_intr_off;
+ ipath_write_ureg(dd, ur_rcvhdrhead, lval,
+ pd->port_port);
+ if (updegr) {
+ ipath_write_ureg(dd, ur_rcvegrindexhead,
+ etail, pd->port_port);
+ updegr = 0;
+ }
+ }
+ }
+
+ if (!dd->ipath_rhdrhead_intr_off && !reloop &&
+ !(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ /* IBA6110 workaround; we can have a race clearing chip
+ * interrupt with another interrupt about to be delivered,
+ * and can clear it before it is delivered on the GPIO
+ * workaround. By doing the extra check here for the
+ * in-memory tail register updating while we were doing
+ * earlier packets, we "almost" guarantee we have covered
+ * that case.
+ */
+ u32 hqtail = ipath_get_rcvhdrtail(pd);
+ if (hqtail != hdrqtail) {
+ hdrqtail = hqtail;
+ reloop = 1; /* loop 1 extra time at most */
+ goto reloop;
+ }
+ }
+
+ pkttot += i;
+
+ pd->port_head = l;
+
+ if (pkttot > ipath_stats.sps_maxpkts_call)
+ ipath_stats.sps_maxpkts_call = pkttot;
+ ipath_stats.sps_port0pkts += pkttot;
+ ipath_stats.sps_avgpkts_call =
+ ipath_stats.sps_port0pkts / ++totcalls;
+
+bail:;
+}
+
+/**
+ * ipath_update_pio_bufs - update shadow copy of the PIO availability map
+ * @dd: the infinipath device
+ *
+ * called whenever our local copy indicates we have run out of send buffers
+ * NOTE: This can be called from interrupt context by some code
+ * and from non-interrupt context by ipath_getpiobuf().
+ */
+
+static void ipath_update_pio_bufs(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ int i;
+ const unsigned piobregs = (unsigned)dd->ipath_pioavregs;
+
+ /* If the generation (check) bits have changed, then we update the
+ * busy bit for the corresponding PIO buffer. This algorithm will
+ * modify positions to the value they already have in some cases
+ * (i.e., no change), but it's faster than changing only the bits
+ * that have changed.
+ *
+ * We would like to do this atomicly, to avoid spinlocks in the
+ * critical send path, but that's not really possible, given the
+ * type of changes, and that this routine could be called on
+ * multiple cpu's simultaneously, so we lock in this routine only,
+ * to avoid conflicting updates; all we change is the shadow, and
+ * it's a single 64 bit memory location, so by definition the update
+ * is atomic in terms of what other cpu's can see in testing the
+ * bits. The spin_lock overhead isn't too bad, since it only
+ * happens when all buffers are in use, so only cpu overhead, not
+ * latency or bandwidth is affected.
+ */
+ if (!dd->ipath_pioavailregs_dma) {
+ ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
+ return;
+ }
+ if (ipath_debug & __IPATH_VERBDBG) {
+ /* only if packet debug and verbose */
+ volatile __le64 *dma = dd->ipath_pioavailregs_dma;
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+
+ ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, "
+ "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx "
+ "s3=%lx\n",
+ (unsigned long long) le64_to_cpu(dma[0]),
+ shadow[0],
+ (unsigned long long) le64_to_cpu(dma[1]),
+ shadow[1],
+ (unsigned long long) le64_to_cpu(dma[2]),
+ shadow[2],
+ (unsigned long long) le64_to_cpu(dma[3]),
+ shadow[3]);
+ if (piobregs > 4)
+ ipath_cdbg(
+ PKT, "2nd group, dma4=%llx shad4=%lx, "
+ "d5=%llx s5=%lx, d6=%llx s6=%lx, "
+ "d7=%llx s7=%lx\n",
+ (unsigned long long) le64_to_cpu(dma[4]),
+ shadow[4],
+ (unsigned long long) le64_to_cpu(dma[5]),
+ shadow[5],
+ (unsigned long long) le64_to_cpu(dma[6]),
+ shadow[6],
+ (unsigned long long) le64_to_cpu(dma[7]),
+ shadow[7]);
+ }
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < piobregs; i++) {
+ u64 pchbusy, pchg, piov, pnew;
+ /*
+ * Chip Errata: bug 6641; even and odd qwords>3 are swapped
+ */
+ if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
+ piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]);
+ else
+ piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
+ pchg = dd->ipath_pioavailkernel[i] &
+ ~(dd->ipath_pioavailshadow[i] ^ piov);
+ pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
+ if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
+ pnew = dd->ipath_pioavailshadow[i] & ~pchbusy;
+ pnew |= piov & pchbusy;
+ dd->ipath_pioavailshadow[i] = pnew;
+ }
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
+/*
+ * used to force update of pioavailshadow if we can't get a pio buffer.
+ * Needed primarily due to exitting freeze mode after recovering
+ * from errors. Done lazily, because it's safer (known to not
+ * be writing pio buffers).
+ */
+static void ipath_reset_availshadow(struct ipath_devdata *dd)
+{
+ int i, im;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ u64 val, oldval;
+ /* deal with 6110 chip bug on high register #s */
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ val = le64_to_cpu(dd->ipath_pioavailregs_dma[im]);
+ /*
+ * busy out the buffers not in the kernel avail list,
+ * without changing the generation bits.
+ */
+ oldval = dd->ipath_pioavailshadow[i];
+ dd->ipath_pioavailshadow[i] = val |
+ ((~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT) &
+ 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */
+ if (oldval != dd->ipath_pioavailshadow[i])
+ ipath_dbg("shadow[%d] was %Lx, now %lx\n",
+ i, (unsigned long long) oldval,
+ dd->ipath_pioavailshadow[i]);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
+/**
+ * ipath_setrcvhdrsize - set the receive header size
+ * @dd: the infinipath device
+ * @rhdrsize: the receive header size
+ *
+ * called from user init code, and also layered driver init
+ */
+int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize)
+{
+ int ret = 0;
+
+ if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) {
+ if (dd->ipath_rcvhdrsize != rhdrsize) {
+ dev_info(&dd->pcidev->dev,
+ "Error: can't set protocol header "
+ "size %u, already %u\n",
+ rhdrsize, dd->ipath_rcvhdrsize);
+ ret = -EAGAIN;
+ } else
+ ipath_cdbg(VERBOSE, "Reuse same protocol header "
+ "size %u\n", dd->ipath_rcvhdrsize);
+ } else if (rhdrsize > (dd->ipath_rcvhdrentsize -
+ (sizeof(u64) / sizeof(u32)))) {
+ ipath_dbg("Error: can't set protocol header size %u "
+ "(> max %u)\n", rhdrsize,
+ dd->ipath_rcvhdrentsize -
+ (u32) (sizeof(u64) / sizeof(u32)));
+ ret = -EOVERFLOW;
+ } else {
+ dd->ipath_flags |= IPATH_RCVHDRSZ_SET;
+ dd->ipath_rcvhdrsize = rhdrsize;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
+ dd->ipath_rcvhdrsize);
+ ipath_cdbg(VERBOSE, "Set protocol header size to %u\n",
+ dd->ipath_rcvhdrsize);
+ }
+ return ret;
+}
+
+/*
+ * debugging code and stats updates if no pio buffers available.
+ */
+static noinline void no_pio_bufs(struct ipath_devdata *dd)
+{
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+ __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma;
+
+ dd->ipath_upd_pio_shadow = 1;
+
+ /*
+ * not atomic, but if we lose a stat count in a while, that's OK
+ */
+ ipath_stats.sps_nopiobufs++;
+ if (!(++dd->ipath_consec_nopiobuf % 100000)) {
+ ipath_force_pio_avail_update(dd); /* at start */
+ ipath_dbg("%u tries no piobufavail ts%lx; dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
+ dd->ipath_consec_nopiobuf,
+ (unsigned long)get_cycles(),
+ (unsigned long long) le64_to_cpu(dma[0]),
+ (unsigned long long) le64_to_cpu(dma[1]),
+ (unsigned long long) le64_to_cpu(dma[2]),
+ (unsigned long long) le64_to_cpu(dma[3]),
+ shadow[0], shadow[1], shadow[2], shadow[3]);
+ /*
+ * 4 buffers per byte, 4 registers above, cover rest
+ * below
+ */
+ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
+ (sizeof(shadow[0]) * 4 * 4))
+ ipath_dbg("2nd group: dmacopy: "
+ "%llx %llx %llx %llx\n"
+ "ipath shadow: %lx %lx %lx %lx\n",
+ (unsigned long long)le64_to_cpu(dma[4]),
+ (unsigned long long)le64_to_cpu(dma[5]),
+ (unsigned long long)le64_to_cpu(dma[6]),
+ (unsigned long long)le64_to_cpu(dma[7]),
+ shadow[4], shadow[5], shadow[6], shadow[7]);
+
+ /* at end, so update likely happened */
+ ipath_reset_availshadow(dd);
+ }
+}
+
+/*
+ * common code for normal driver pio buffer allocation, and reserved
+ * allocation.
+ *
+ * do appropriate marking as busy, etc.
+ * returns buffer number if one found (>=0), negative number is error.
+ */
+static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd,
+ u32 *pbufnum, u32 first, u32 last, u32 firsti)
+{
+ int i, j, updated = 0;
+ unsigned piobcnt;
+ unsigned long flags;
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+ u32 __iomem *buf;
+
+ piobcnt = last - first;
+ if (dd->ipath_upd_pio_shadow) {
+ /*
+ * Minor optimization. If we had no buffers on last call,
+ * start out by doing the update; continue and do scan even
+ * if no buffers were updated, to be paranoid
+ */
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ } else
+ i = firsti;
+rescan:
+ /*
+ * while test_and_set_bit() is atomic, we do that and then the
+ * change_bit(), and the pair is not. See if this is the cause
+ * of the remaining armlaunch errors.
+ */
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ for (j = 0; j < piobcnt; j++, i++) {
+ if (i >= last)
+ i = first;
+ if (__test_and_set_bit((2 * i) + 1, shadow))
+ continue;
+ /* flip generation bit */
+ __change_bit(2 * i, shadow);
+ break;
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ if (j == piobcnt) {
+ if (!updated) {
+ /*
+ * first time through; shadow exhausted, but may be
+ * buffers available, try an update and then rescan.
+ */
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ goto rescan;
+ } else if (updated == 1 && piobcnt <=
+ ((dd->ipath_sendctrl
+ >> INFINIPATH_S_UPDTHRESH_SHIFT) &
+ INFINIPATH_S_UPDTHRESH_MASK)) {
+ /*
+ * for chips supporting and using the update
+ * threshold we need to force an update of the
+ * in-memory copy if the count is less than the
+ * thershold, then check one more time.
+ */
+ ipath_force_pio_avail_update(dd);
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
+ goto rescan;
+ }
+
+ no_pio_bufs(dd);
+ buf = NULL;
+ } else {
+ if (i < dd->ipath_piobcnt2k)
+ buf = (u32 __iomem *) (dd->ipath_pio2kbase +
+ i * dd->ipath_palign);
+ else
+ buf = (u32 __iomem *)
+ (dd->ipath_pio4kbase +
+ (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
+ if (pbufnum)
+ *pbufnum = i;
+ }
+
+ return buf;
+}
+
+/**
+ * ipath_getpiobuf - find an available pio buffer
+ * @dd: the infinipath device
+ * @plen: the size of the PIO buffer needed in 32-bit words
+ * @pbufnum: the buffer number is placed here
+ */
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum)
+{
+ u32 __iomem *buf;
+ u32 pnum, nbufs;
+ u32 first, lasti;
+
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS) {
+ first = dd->ipath_piobcnt2k;
+ lasti = dd->ipath_lastpioindexl;
+ } else {
+ first = 0;
+ lasti = dd->ipath_lastpioindex;
+ }
+ nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti);
+
+ if (buf) {
+ /*
+ * Set next starting place. It's just an optimization,
+ * it doesn't matter who wins on this, so no locking
+ */
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
+ dd->ipath_lastpioindexl = pnum + 1;
+ else
+ dd->ipath_lastpioindex = pnum + 1;
+ if (dd->ipath_upd_pio_shadow)
+ dd->ipath_upd_pio_shadow = 0;
+ if (dd->ipath_consec_nopiobuf)
+ dd->ipath_consec_nopiobuf = 0;
+ ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
+ pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf);
+ if (pbufnum)
+ *pbufnum = pnum;
+
+ }
+ return buf;
+}
+
+/**
+ * ipath_chg_pioavailkernel - change which send buffers are available for kernel
+ * @dd: the infinipath device
+ * @start: the starting send buffer number
+ * @len: the number of send buffers
+ * @avail: true if the buffers are available for kernel use, false otherwise
+ */
+void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
+ unsigned len, int avail)
+{
+ unsigned long flags;
+ unsigned end, cnt = 0;
+
+ /* There are two bits per send buffer (busy and generation) */
+ start *= 2;
+ end = start + len * 2;
+
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ /* Set or clear the busy bit in the shadow. */
+ while (start < end) {
+ if (avail) {
+ unsigned long dma;
+ int i, im;
+ /*
+ * the BUSY bit will never be set, because we disarm
+ * the user buffers before we hand them back to the
+ * kernel. We do have to make sure the generation
+ * bit is set correctly in shadow, since it could
+ * have changed many times while allocated to user.
+ * We can't use the bitmap functions on the full
+ * dma array because it is always little-endian, so
+ * we have to flip to host-order first.
+ * BITS_PER_LONG is slightly wrong, since it's
+ * always 64 bits per register in chip...
+ * We only work on 64 bit kernels, so that's OK.
+ */
+ /* deal with 6110 chip bug on high register #s */
+ i = start / BITS_PER_LONG;
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ dma = (unsigned long) le64_to_cpu(
+ dd->ipath_pioavailregs_dma[im]);
+ if (test_bit((INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start) % BITS_PER_LONG, &dma))
+ __set_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ else
+ __clear_bit(INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT
+ + start, dd->ipath_pioavailshadow);
+ __set_bit(start, dd->ipath_pioavailkernel);
+ } else {
+ __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
+ dd->ipath_pioavailshadow);
+ __clear_bit(start, dd->ipath_pioavailkernel);
+ }
+ start += 2;
+ }
+
+ if (dd->ipath_pioupd_thresh) {
+ end = 2 * (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+ cnt = bitmap_weight(dd->ipath_pioavailkernel, end);
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+
+ /*
+ * When moving buffers from kernel to user, if number assigned to
+ * the user is less than the pio update threshold, and threshold
+ * is supported (cnt was computed > 0), drop the update threshold
+ * so we update at least once per allocated number of buffers.
+ * In any case, if the kernel buffers are less than the threshold,
+ * drop the threshold. We don't bother increasing it, having once
+ * decreased it, since it would typically just cycle back and forth.
+ * If we don't decrease below buffers in use, we can wait a long
+ * time for an update, until some other context uses PIO buffers.
+ */
+ if (!avail && len < cnt)
+ cnt = len;
+ if (cnt < dd->ipath_pioupd_thresh) {
+ dd->ipath_pioupd_thresh = cnt;
+ ipath_dbg("Decreased pio update threshold to %u\n",
+ dd->ipath_pioupd_thresh);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
+ << INFINIPATH_S_UPDTHRESH_SHIFT);
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+}
+
+/**
+ * ipath_create_rcvhdrq - create a receive header queue
+ * @dd: the infinipath device
+ * @pd: the port data
+ *
+ * this must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
+ */
+int ipath_create_rcvhdrq(struct ipath_devdata *dd,
+ struct ipath_portdata *pd)
+{
+ int ret = 0;
+
+ if (!pd->port_rcvhdrq) {
+ dma_addr_t phys_hdrqtail;
+ gfp_t gfp_flags = GFP_USER | __GFP_COMP;
+ int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE);
+
+ pd->port_rcvhdrq = dma_alloc_coherent(
+ &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
+ gfp_flags);
+
+ if (!pd->port_rcvhdrq) {
+ ipath_dev_err(dd, "attempt to allocate %d bytes "
+ "for port %u rcvhdrq failed\n",
+ amt, pd->port_port);
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+ GFP_KERNEL);
+ if (!pd->port_rcvhdrtail_kvaddr) {
+ ipath_dev_err(dd, "attempt to allocate 1 page "
+ "for port %u rcvhdrqtailaddr "
+ "failed\n", pd->port_port);
+ ret = -ENOMEM;
+ dma_free_coherent(&dd->pcidev->dev, amt,
+ pd->port_rcvhdrq,
+ pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
+ goto bail;
+ }
+ pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
+ ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx "
+ "physical\n", pd->port_port,
+ (unsigned long long) phys_hdrqtail);
+ }
+
+ pd->port_rcvhdrq_size = amt;
+
+ ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu "
+ "for port %u rcvhdr Q\n",
+ amt >> PAGE_SHIFT, pd->port_rcvhdrq,
+ (unsigned long) pd->port_rcvhdrq_phys,
+ (unsigned long) pd->port_rcvhdrq_size,
+ pd->port_port);
+ }
+ else
+ ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
+ "hdrtailaddr@%p %llx physical\n",
+ pd->port_port, pd->port_rcvhdrq,
+ (unsigned long long) pd->port_rcvhdrq_phys,
+ pd->port_rcvhdrtail_kvaddr, (unsigned long long)
+ pd->port_rcvhdrqtailaddr_phys);
+
+ /* clear for security and sanity on each use */
+ memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
+ if (pd->port_rcvhdrtail_kvaddr)
+ memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
+
+ /*
+ * tell chip each time we init it, even if we are re-using previous
+ * memory (we zero the register at process close)
+ */
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
+ pd->port_port, pd->port_rcvhdrqtailaddr_phys);
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
+ pd->port_port, pd->port_rcvhdrq_phys);
+
+bail:
+ return ret;
+}
+
+
+/*
+ * Flush all sends that might be in the ready to send state, as well as any
+ * that are in the process of being sent. Used whenever we need to be
+ * sure the send side is idle. Cleans up all buffer state by canceling
+ * all pio buffers, and issuing an abort, which cleans up anything in the
+ * launch fifo. The cancel is superfluous on some chip versions, but
+ * it's safer to always do it.
+ * PIOAvail bits are updated by the chip as if normal send had happened.
+ */
+void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
+{
+ unsigned long flags;
+
+ if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
+ ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
+ goto bail;
+ }
+ /*
+ * If we have SDMA, and it's not disabled, we have to kick off the
+ * abort state machine, provided we aren't already aborting.
+ * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
+ * we skip the rest of this routine. It is already "in progress"
+ */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
+ int skip_cancel;
+ unsigned long *statp = &dd->ipath_sdma_status;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ skip_cancel =
+ test_and_set_bit(IPATH_SDMA_ABORTING, statp)
+ && !test_bit(IPATH_SDMA_DISABLED, statp);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (skip_cancel)
+ goto bail;
+ }
+
+ ipath_dbg("Cancelling all in-progress send buffers\n");
+
+ /* skip armlaunch errs for a while */
+ dd->ipath_lastcancel = jiffies + HZ / 2;
+
+ /*
+ * The abort bit is auto-clearing. We also don't want pioavail
+ * update happening during this, and we don't want any other
+ * sends going out, so turn those off for the duration. We read
+ * the scratch register to be sure that cancels and the abort
+ * have taken effect in the chip. Otherwise two parts are same
+ * as ipath_force_pio_avail_update()
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
+ | INFINIPATH_S_PIOENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl | INFINIPATH_S_ABORT);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* disarm all send buffers */
+ ipath_disarm_piobufs(dd, 0,
+ dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+
+ if (restore_sendctrl) {
+ /* else done by caller later if needed */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
+ INFINIPATH_S_PIOENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ /* and again, be sure all have hit the chip */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+
+ if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
+ !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
+ test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ /* only wait so long for intr */
+ dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
+ dd->ipath_sdma_reset_wait = 200;
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ }
+bail:;
+}
+
+/*
+ * Force an update of in-memory copy of the pioavail registers, when
+ * needed for any of a variety of reasons. We read the scratch register
+ * to make it highly likely that the update will have happened by the
+ * time we return. If already off (as in cancel_sends above), this
+ * routine is a nop, on the assumption that the caller will "do the
+ * right thing".
+ */
+void ipath_force_pio_avail_update(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+}
+
+static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd,
+ int linitcmd)
+{
+ u64 mod_wd;
+ static const char *what[4] = {
+ [0] = "NOP",
+ [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN",
+ [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
+ [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
+ };
+
+ if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) {
+ /*
+ * If we are told to disable, note that so link-recovery
+ * code does not attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ } else if (linitcmd) {
+ /*
+ * Any other linkinitcmd will lead to LINKDOWN and then
+ * to INIT (if all is well), so clear flag to let
+ * link-recovery code attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ }
+
+ mod_wd = (linkcmd << dd->ibcc_lc_shift) |
+ (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_cdbg(VERBOSE,
+ "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n",
+ dd->ipath_unit, what[linkcmd], linitcmd,
+ ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl | mod_wd);
+ /* read from chip so write is flushed */
+ (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+}
+
+int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
+{
+ u32 lstate;
+ int ret;
+
+ switch (newstate) {
+ case IPATH_IB_LINKDOWN_ONLY:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_POLL);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_SLEEP:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_SLEEP);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_DISABLE:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_DISABLE);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKARM:
+ if (dd->ipath_flags & IPATH_LINKARMED) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags &
+ (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0);
+
+ /*
+ * Since the port can transition to ACTIVE by receiving
+ * a non VL 15 packet, wait for either state.
+ */
+ lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
+ break;
+
+ case IPATH_IB_LINKACTIVE:
+ if (dd->ipath_flags & IPATH_LINKACTIVE) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags & IPATH_LINKARMED)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0);
+ lstate = IPATH_LINKACTIVE;
+ break;
+
+ case IPATH_IB_LINK_LOOPBACK:
+ dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n");
+ dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+
+ /* turn heartbeat off, as it causes loopback to fail */
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINK_EXTERNAL:
+ dev_info(&dd->pcidev->dev,
+ "Disabling IB local loopback (normal)\n");
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
+ dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ /*
+ * Heartbeat can be explicitly enabled by the user via
+ * "hrtbt_enable" "file", and if disabled, trying to enable here
+ * will have no effect. Implicit changes (heartbeat off when
+ * loopback on, and vice versa) are included to ease testing.
+ */
+ case IPATH_IB_LINK_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
+ goto bail;
+
+ case IPATH_IB_LINK_NO_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ goto bail;
+
+ default:
+ ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
+ ret = -EINVAL;
+ goto bail;
+ }
+ ret = ipath_wait_linkstate(dd, lstate, 2000);
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_set_mtu - set the MTU
+ * @dd: the infinipath device
+ * @arg: the new MTU
+ *
+ * we can handle "any" incoming size, the issue here is whether we
+ * need to restrict our outgoing size. For now, we don't do any
+ * sanity checking on this, and we don't deal with what happens to
+ * programs that are already running when the size changes.
+ * NOTE: changing the MTU will usually cause the IBC to go back to
+ * link INIT state...
+ */
+int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
+{
+ u32 piosize;
+ int changed = 0;
+ int ret;
+
+ /*
+ * mtu is IB data payload max. It's the largest power of 2 less
+ * than piosize (or even larger, since it only really controls the
+ * largest we can receive; we can send the max of the mtu and
+ * piosize). We check that it's one of the valid IB sizes.
+ */
+ if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
+ (arg != 4096 || !ipath_mtu4096)) {
+ ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (dd->ipath_ibmtu == arg) {
+ ret = 0; /* same as current */
+ goto bail;
+ }
+
+ piosize = dd->ipath_ibmaxlen;
+ dd->ipath_ibmtu = arg;
+
+ if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
+ /* Only if it's not the initial value (or reset to it) */
+ if (piosize != dd->ipath_init_ibmaxlen) {
+ if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
+ piosize = dd->ipath_init_ibmaxlen;
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+ } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
+ piosize = arg + IPATH_PIO_MAXIBHDR;
+ ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
+ "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
+ arg);
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+
+ if (changed) {
+ u64 ibc = dd->ipath_ibcctrl, ibdw;
+ /*
+ * update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
+ */
+ dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
+ ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
+ dd->ibcc_mpl_shift);
+ ibc |= ibdw << dd->ibcc_mpl_shift;
+ dd->ipath_ibcctrl = ibc;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ dd->ipath_f_tidtemplate(dd);
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc)
+{
+ dd->ipath_lid = lid;
+ dd->ipath_lmc = lmc;
+
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid |
+ (~((1U << lmc) - 1)) << 16);
+
+ dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid);
+
+ return 0;
+}
+
+
+/**
+ * ipath_write_kreg_port - write a device's per-port 64-bit kernel register
+ * @dd: the infinipath device
+ * @regno: the register number to write
+ * @port: the port containing the register
+ * @value: the value to write
+ *
+ * Registers that vary with the chip implementation constants (port)
+ * use this routine.
+ */
+void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno,
+ unsigned port, u64 value)
+{
+ u16 where;
+
+ if (port < dd->ipath_portcnt &&
+ (regno == dd->ipath_kregs->kr_rcvhdraddr ||
+ regno == dd->ipath_kregs->kr_rcvhdrtailaddr))
+ where = regno + port;
+ else
+ where = -1;
+
+ ipath_write_kreg(dd, where, value);
+}
+
+/*
+ * Following deal with the "obviously simple" task of overriding the state
+ * of the LEDS, which normally indicate link physical and logical status.
+ * The complications arise in dealing with different hardware mappings
+ * and the board-dependent routine being called from interrupts.
+ * and then there's the requirement to _flash_ them.
+ */
+#define LED_OVER_FREQ_SHIFT 8
+#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
+/* Below is "non-zero" to force override, but both actual LEDs are off */
+#define LED_OVER_BOTH_OFF (8)
+
+static void ipath_run_led_override(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+ int timeoff;
+ int pidx;
+ u64 lstate, ltstate, val;
+
+ if (!(dd->ipath_flags & IPATH_INITTED))
+ return;
+
+ pidx = dd->ipath_led_override_phase++ & 1;
+ dd->ipath_led_override = dd->ipath_led_override_vals[pidx];
+ timeoff = dd->ipath_led_override_timeoff;
+
+ /*
+ * below potentially restores the LED values per current status,
+ * should also possibly setup the traffic-blink register,
+ * but leave that to per-chip functions.
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ ltstate = ipath_ib_linktrstate(dd, val);
+ lstate = ipath_ib_linkstate(dd, val);
+
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
+}
+
+void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val)
+{
+ int timeoff, freq;
+
+ if (!(dd->ipath_flags & IPATH_INITTED))
+ return;
+
+ /* First check if we are blinking. If not, use 1HZ polling */
+ timeoff = HZ;
+ freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;
+
+ if (freq) {
+ /* For blink, set each phase from one nybble of val */
+ dd->ipath_led_override_vals[0] = val & 0xF;
+ dd->ipath_led_override_vals[1] = (val >> 4) & 0xF;
+ timeoff = (HZ << 4)/freq;
+ } else {
+ /* Non-blink set both phases the same. */
+ dd->ipath_led_override_vals[0] = val & 0xF;
+ dd->ipath_led_override_vals[1] = val & 0xF;
+ }
+ dd->ipath_led_override_timeoff = timeoff;
+
+ /*
+ * If the timer has not already been started, do so. Use a "quick"
+ * timeout so the function will be called soon, to look at our request.
+ */
+ if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) {
+ /* Need to start timer */
+ init_timer(&dd->ipath_led_override_timer);
+ dd->ipath_led_override_timer.function =
+ ipath_run_led_override;
+ dd->ipath_led_override_timer.data = (unsigned long) dd;
+ dd->ipath_led_override_timer.expires = jiffies + 1;
+ add_timer(&dd->ipath_led_override_timer);
+ } else
+ atomic_dec(&dd->ipath_led_override_timer_active);
+}
+
+/**
+ * ipath_shutdown_device - shut down a device
+ * @dd: the infinipath device
+ *
+ * This is called to make the device quiet when we are about to
+ * unload the driver, and also when the device is administratively
+ * disabled. It does not free any data structures.
+ * Everything it does has to be setup again by ipath_init_chip(dd,1)
+ */
+void ipath_shutdown_device(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ ipath_dbg("Shutting down the device\n");
+
+ ipath_hol_up(dd); /* make sure user processes aren't suspended */
+
+ dd->ipath_flags |= IPATH_LINKUNK;
+ dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
+ IPATH_LINKINIT | IPATH_LINKARMED |
+ IPATH_LINKACTIVE);
+ *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF |
+ IPATH_STATUS_IB_READY);
+
+ /* mask interrupts, but not errors */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+
+ dd->ipath_rcvctrl = 0;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
+ /*
+ * gracefully stop all sends allowing any in progress to trickle out
+ * first.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl = 0;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ /* flush it */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /*
+ * enough for anything that's going to trickle out to have actually
+ * done so.
+ */
+ udelay(5);
+
+ dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
+
+ ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
+ ipath_cancel_sends(dd, 0);
+
+ /*
+ * we are shutting down, so tell components that care. We don't do
+ * this on just a link state change, much like ethernet, a cable
+ * unplug, etc. doesn't change driver state
+ */
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+
+ /* disable IBC */
+ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control | INFINIPATH_C_FREEZEMODE);
+
+ /*
+ * clear SerdesEnable and turn the leds off; do this here because
+ * we are unloading, so don't count on interrupts to move along
+ * Turn the LEDs off explicitly for the same reason.
+ */
+ dd->ipath_f_quiet_serdes(dd);
+
+ /* stop all the timers that might still be running */
+ del_timer_sync(&dd->ipath_hol_timer);
+ if (dd->ipath_stats_timer_active) {
+ del_timer_sync(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer_active = 0;
+ }
+ if (dd->ipath_intrchk_timer.data) {
+ del_timer_sync(&dd->ipath_intrchk_timer);
+ dd->ipath_intrchk_timer.data = 0;
+ }
+ if (atomic_read(&dd->ipath_led_override_timer_active)) {
+ del_timer_sync(&dd->ipath_led_override_timer);
+ atomic_set(&dd->ipath_led_override_timer_active, 0);
+ }
+
+ /*
+ * clear all interrupts and errors, so that the next time the driver
+ * is loaded or device is enabled, we know that whatever is set
+ * happened while we were unloaded
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
+
+ ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n");
+ ipath_update_eeprom_log(dd);
+}
+
+/**
+ * ipath_free_pddata - free a port's allocated data
+ * @dd: the infinipath device
+ * @pd: the portdata structure
+ *
+ * free up any allocated data for a port
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of port data, because it is called after ipath_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ * (The only exception to global state is freeing the port0 port0_skbs.)
+ */
+void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
+{
+ if (!pd)
+ return;
+
+ if (pd->port_rcvhdrq) {
+ ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
+ "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
+ (unsigned long) pd->port_rcvhdrq_size);
+ dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
+ pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
+ if (pd->port_rcvhdrtail_kvaddr) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ pd->port_rcvhdrtail_kvaddr,
+ pd->port_rcvhdrqtailaddr_phys);
+ pd->port_rcvhdrtail_kvaddr = NULL;
+ }
+ }
+ if (pd->port_port && pd->port_rcvegrbuf) {
+ unsigned e;
+
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+ void *base = pd->port_rcvegrbuf[e];
+ size_t size = pd->port_rcvegrbuf_size;
+
+ ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
+ "chunk %u/%u\n", base,
+ (unsigned long) size,
+ e, pd->port_rcvegrbuf_chunks);
+ dma_free_coherent(&dd->pcidev->dev, size,
+ base, pd->port_rcvegrbuf_phys[e]);
+ }
+ kfree(pd->port_rcvegrbuf);
+ pd->port_rcvegrbuf = NULL;
+ kfree(pd->port_rcvegrbuf_phys);
+ pd->port_rcvegrbuf_phys = NULL;
+ pd->port_rcvegrbuf_chunks = 0;
+ } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
+ unsigned e;
+ struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;
+
+ dd->ipath_port0_skbinfo = NULL;
+ ipath_cdbg(VERBOSE, "free closed port %d "
+ "ipath_port0_skbinfo @ %p\n", pd->port_port,
+ skbinfo);
+ for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++)
+ if (skbinfo[e].skb) {
+ pci_unmap_single(dd->pcidev, skbinfo[e].phys,
+ dd->ipath_ibmaxlen,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skbinfo[e].skb);
+ }
+ vfree(skbinfo);
+ }
+ kfree(pd->port_tid_pg_list);
+ vfree(pd->subport_uregbase);
+ vfree(pd->subport_rcvegrbuf);
+ vfree(pd->subport_rcvhdr_base);
+ kfree(pd);
+}
+
+static int __init infinipath_init(void)
+{
+ int ret;
+
+ if (ipath_debug & __IPATH_DBG)
+ printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);
+
+ /*
+ * These must be called before the driver is registered with
+ * the PCI subsystem.
+ */
+ idr_init(&unit_table);
+
+ ret = pci_register_driver(&ipath_driver);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Unable to register driver: error %d\n", -ret);
+ goto bail_unit;
+ }
+
+ ret = ipath_init_ipathfs();
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
+ "ipathfs: error %d\n", -ret);
+ goto bail_pci;
+ }
+
+ goto bail;
+
+bail_pci:
+ pci_unregister_driver(&ipath_driver);
+
+bail_unit:
+ idr_destroy(&unit_table);
+
+bail:
+ return ret;
+}
+
+static void __exit infinipath_cleanup(void)
+{
+ ipath_exit_ipathfs();
+
+ ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
+ pci_unregister_driver(&ipath_driver);
+
+ idr_destroy(&unit_table);
+}
+
+/**
+ * ipath_reset_device - reset the chip if possible
+ * @unit: the device to reset
+ *
+ * Whether or not reset is successful, we attempt to re-initialize the chip
+ * (that is, much like a driver unload/reload). We clear the INITTED flag
+ * so that the various entry points will fail until we reinitialize. For
+ * now, we only allow this if no user ports are open that use chip resources
+ */
+int ipath_reset_device(int unit)
+{
+ int ret, i;
+ struct ipath_devdata *dd = ipath_lookup(unit);
+ unsigned long flags;
+
+ if (!dd) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ if (atomic_read(&dd->ipath_led_override_timer_active)) {
+ /* Need to stop LED timer, _then_ shut off LEDs */
+ del_timer_sync(&dd->ipath_led_override_timer);
+ atomic_set(&dd->ipath_led_override_timer_active, 0);
+ }
+
+ /* Shut off LEDs after we are sure timer is not running */
+ dd->ipath_led_override = LED_OVER_BOTH_OFF;
+ dd->ipath_f_setextled(dd, 0, 0);
+
+ dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit);
+
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) {
+ dev_info(&dd->pcidev->dev, "Invalid unit number %u or "
+ "not initialized or not present\n", unit);
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ if (dd->ipath_pd)
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
+ continue;
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ ipath_dbg("unit %u port %d is in use "
+ "(PID %u cmd %s), can't reset\n",
+ unit, i,
+ pid_nr(dd->ipath_pd[i]->port_pid),
+ dd->ipath_pd[i]->port_comm);
+ ret = -EBUSY;
+ goto bail;
+ }
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
+ dd->ipath_flags &= ~IPATH_INITTED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+ ret = dd->ipath_f_reset(dd);
+ if (ret == 1) {
+ ipath_dbg("Reinitializing unit %u after reset attempt\n",
+ unit);
+ ret = ipath_init_chip(dd, 1);
+ } else
+ ret = -EAGAIN;
+ if (ret)
+ ipath_dev_err(dd, "Reinitialize unit %u after "
+ "reset failed with %d\n", unit, ret);
+ else
+ dev_info(&dd->pcidev->dev, "Reinitialized unit %u after "
+ "resetting\n", unit);
+
+bail:
+ return ret;
+}
+
+/*
+ * send a signal to all the processes that have the driver open
+ * through the normal interfaces (i.e., everything other than diags
+ * interface). Returns number of signalled processes.
+ */
+static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
+{
+ int i, sub, any = 0;
+ struct pid *pid;
+ unsigned long flags;
+
+ if (!dd->ipath_pd)
+ return 0;
+
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
+ continue;
+ pid = dd->ipath_pd[i]->port_pid;
+ if (!pid)
+ continue;
+
+ dev_info(&dd->pcidev->dev, "context %d in use "
+ "(PID %u), sending signal %d\n",
+ i, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
+ any++;
+ for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
+ pid = dd->ipath_pd[i]->port_subpid[sub];
+ if (!pid)
+ continue;
+ dev_info(&dd->pcidev->dev, "sub-context "
+ "%d:%d in use (PID %u), sending "
+ "signal %d\n", i, sub, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
+ any++;
+ }
+ }
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+ return any;
+}
+
+static void ipath_hol_signal_down(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGSTOP))
+ ipath_dbg("Stopped some processes\n");
+ ipath_cancel_sends(dd, 1);
+}
+
+
+static void ipath_hol_signal_up(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGCONT))
+ ipath_dbg("Continued some processes\n");
+}
+
+/*
+ * link is down, stop any users processes, and flush pending sends
+ * to prevent HoL blocking, then start the HoL timer that
+ * periodically continues, then stop procs, so they can detect
+ * link down if they want, and do something about it.
+ * Timer may already be running, so use mod_timer, not add_timer.
+ */
+void ipath_hol_down(struct ipath_devdata *dd)
+{
+ dd->ipath_hol_state = IPATH_HOL_DOWN;
+ ipath_hol_signal_down(dd);
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
+}
+
+/*
+ * link is up, continue any user processes, and ensure timer
+ * is a nop, if running. Let timer keep running, if set; it
+ * will nop when it sees the link is up
+ */
+void ipath_hol_up(struct ipath_devdata *dd)
+{
+ ipath_hol_signal_up(dd);
+ dd->ipath_hol_state = IPATH_HOL_UP;
+}
+
+/*
+ * toggle the running/not running state of user proceses
+ * to prevent HoL blocking on chip resources, but still allow
+ * user processes to do link down special case handling.
+ * Should only be called via the timer
+ */
+void ipath_hol_event(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
+ && dd->ipath_hol_state != IPATH_HOL_UP) {
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ ipath_dbg("Stopping processes\n");
+ ipath_hol_signal_down(dd);
+ } else { /* may do "extra" if also in ipath_hol_up() */
+ dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
+ ipath_dbg("Continuing processes\n");
+ ipath_hol_signal_up(dd);
+ }
+ if (dd->ipath_hol_state == IPATH_HOL_UP)
+ ipath_dbg("link's up, don't resched timer\n");
+ else {
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ mod_timer(&dd->ipath_hol_timer,
+ dd->ipath_hol_timer.expires);
+ }
+}
+
+int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
+{
+ u64 val;
+
+ if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK)
+ return -1;
+ if (dd->ipath_rx_pol_inv != new_pol_inv) {
+ dd->ipath_rx_pol_inv = new_pol_inv;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
+ INFINIPATH_XGXS_RX_POL_SHIFT);
+ val |= ((u64)dd->ipath_rx_pol_inv) <<
+ INFINIPATH_XGXS_RX_POL_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ }
+ return 0;
+}
+
+/*
+ * Disable and enable the armlaunch error. Used for PIO bandwidth testing on
+ * the 7220, which is count-based, rather than trigger-based. Safe for the
+ * driver check, since it's at init. Not completely safe when used for
+ * user-mode checking, since some error checking can be lost, but not
+ * particularly risky, and only has problematic side-effects in the face of
+ * very buggy user code. There is no reference counting, but that's also
+ * fine, given the intended use.
+ */
+void ipath_enable_armlaunch(struct ipath_devdata *dd)
+{
+ dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
+ INFINIPATH_E_SPIOARMLAUNCH);
+ dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+}
+
+void ipath_disable_armlaunch(struct ipath_devdata *dd)
+{
+ /* so don't re-enable if already set */
+ dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+}
+
+module_init(infinipath_init);
+module_exit(infinipath_cleanup);
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_kernel.h"
+
+/*
+ * InfiniPath I2C driver for a serial eeprom. This is not a generic
+ * I2C interface. For a start, the device we're using (Atmel AT24C11)
+ * doesn't work like a regular I2C device. It looks like one
+ * electrically, but not logically. Normal I2C devices have a single
+ * 7-bit or 10-bit I2C address that they respond to. Valid 7-bit
+ * addresses range from 0x03 to 0x77. Addresses 0x00 to 0x02 and 0x78
+ * to 0x7F are special reserved addresses (e.g. 0x00 is the "general
+ * call" address.) The Atmel device, on the other hand, responds to ALL
+ * 7-bit addresses. It's designed to be the only device on a given I2C
+ * bus. A 7-bit address corresponds to the memory address within the
+ * Atmel device itself.
+ *
+ * Also, the timing requirements mean more than simple software
+ * bitbanging, with readbacks from chip to ensure timing (simple udelay
+ * is not enough).
+ *
+ * This all means that accessing the device is specialized enough
+ * that using the standard kernel I2C bitbanging interface would be
+ * impossible. For example, the core I2C eeprom driver expects to find
+ * a device at one or more of a limited set of addresses only. It doesn't
+ * allow writing to an eeprom. It also doesn't provide any means of
+ * accessing eeprom contents from within the kernel, only via sysfs.
+ */
+
+/* Added functionality for IBA7220-based cards */
+#define IPATH_EEPROM_DEV_V1 0xA0
+#define IPATH_EEPROM_DEV_V2 0xA2
+#define IPATH_TEMP_DEV 0x98
+#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
+#define IPATH_NO_DEV (0xFF)
+
+/*
+ * The number of I2C chains is proliferating. Table below brings
+ * some order to the madness. The basic principle is that the
+ * table is scanned from the top, and a "probe" is made to the
+ * device probe_dev. If that succeeds, the chain is considered
+ * to be of that type, and dd->i2c_chain_type is set to the index+1
+ * of the entry.
+ * The +1 is so static initialization can mean "unknown, do probe."
+ */
+static struct i2c_chain_desc {
+ u8 probe_dev; /* If seen at probe, chain is this type */
+ u8 eeprom_dev; /* Dev addr (if any) for EEPROM */
+ u8 temp_dev; /* Dev Addr (if any) for Temp-sense */
+} i2c_chains[] = {
+ { IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
+ { IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
+ { IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
+ { IPATH_NO_DEV }
+};
+
+enum i2c_type {
+ i2c_line_scl = 0,
+ i2c_line_sda
+};
+
+enum i2c_state {
+ i2c_line_low = 0,
+ i2c_line_high
+};
+
+#define READ_CMD 1
+#define WRITE_CMD 0
+
+/**
+ * i2c_gpio_set - set a GPIO line
+ * @dd: the infinipath device
+ * @line: the line to set
+ * @new_line_state: the state to set
+ *
+ * Returns 0 if the line was set to the new state successfully, non-zero
+ * on error.
+ */
+static int i2c_gpio_set(struct ipath_devdata *dd,
+ enum i2c_type line,
+ enum i2c_state new_line_state)
+{
+ u64 out_mask, dir_mask, *gpioval;
+ unsigned long flags = 0;
+
+ gpioval = &dd->ipath_gpio_out;
+
+ if (line == i2c_line_scl) {
+ dir_mask = dd->ipath_gpio_scl;
+ out_mask = (1UL << dd->ipath_gpio_scl_num);
+ } else {
+ dir_mask = dd->ipath_gpio_sda;
+ out_mask = (1UL << dd->ipath_gpio_sda_num);
+ }
+
+ spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
+ if (new_line_state == i2c_line_high) {
+ /* tri-state the output rather than force high */
+ dd->ipath_extctrl &= ~dir_mask;
+ } else {
+ /* config line to be an output */
+ dd->ipath_extctrl |= dir_mask;
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
+
+ /* set output as well (no real verify) */
+ if (new_line_state == i2c_line_high)
+ *gpioval |= out_mask;
+ else
+ *gpioval &= ~out_mask;
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_out, *gpioval);
+ spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
+
+ return 0;
+}
+
+/**
+ * i2c_gpio_get - get a GPIO line state
+ * @dd: the infinipath device
+ * @line: the line to get
+ * @curr_statep: where to put the line state
+ *
+ * Returns 0 if the line was set to the new state successfully, non-zero
+ * on error. curr_state is not set on error.
+ */
+static int i2c_gpio_get(struct ipath_devdata *dd,
+ enum i2c_type line,
+ enum i2c_state *curr_statep)
+{
+ u64 read_val, mask;
+ int ret;
+ unsigned long flags = 0;
+
+ /* check args */
+ if (curr_statep == NULL) {
+ ret = 1;
+ goto bail;
+ }
+
+ /* config line to be an input */
+ if (line == i2c_line_scl)
+ mask = dd->ipath_gpio_scl;
+ else
+ mask = dd->ipath_gpio_sda;
+
+ spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
+ dd->ipath_extctrl &= ~mask;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, dd->ipath_extctrl);
+ /*
+ * Below is very unlikely to reflect true input state if Output
+ * Enable actually changed.
+ */
+ read_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
+ spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
+
+ if (read_val & mask)
+ *curr_statep = i2c_line_high;
+ else
+ *curr_statep = i2c_line_low;
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * i2c_wait_for_writes - wait for a write
+ * @dd: the infinipath device
+ *
+ * We use this instead of udelay directly, so we can make sure
+ * that previous register writes have been flushed all the way
+ * to the chip. Since we are delaying anyway, the cost doesn't
+ * hurt, and makes the bit twiddling more regular
+ */
+static void i2c_wait_for_writes(struct ipath_devdata *dd)
+{
+ (void)ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ rmb();
+}
+
+static void scl_out(struct ipath_devdata *dd, u8 bit)
+{
+ udelay(1);
+ i2c_gpio_set(dd, i2c_line_scl, bit ? i2c_line_high : i2c_line_low);
+
+ i2c_wait_for_writes(dd);
+}
+
+static void sda_out(struct ipath_devdata *dd, u8 bit)
+{
+ i2c_gpio_set(dd, i2c_line_sda, bit ? i2c_line_high : i2c_line_low);
+
+ i2c_wait_for_writes(dd);
+}
+
+static u8 sda_in(struct ipath_devdata *dd, int wait)
+{
+ enum i2c_state bit;
+
+ if (i2c_gpio_get(dd, i2c_line_sda, &bit))
+ ipath_dbg("get bit failed!\n");
+
+ if (wait)
+ i2c_wait_for_writes(dd);
+
+ return bit == i2c_line_high ? 1U : 0;
+}
+
+/**
+ * i2c_ackrcv - see if ack following write is true
+ * @dd: the infinipath device
+ */
+static int i2c_ackrcv(struct ipath_devdata *dd)
+{
+ u8 ack_received;
+
+ /* AT ENTRY SCL = LOW */
+ /* change direction, ignore data */
+ ack_received = sda_in(dd, 1);
+ scl_out(dd, i2c_line_high);
+ ack_received = sda_in(dd, 1) == 0;
+ scl_out(dd, i2c_line_low);
+ return ack_received;
+}
+
+/**
+ * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
+ * @dd: the infinipath device
+ *
+ * Returns byte shifted out of device
+ */
+static int rd_byte(struct ipath_devdata *dd)
+{
+ int bit_cntr, data;
+
+ data = 0;
+
+ for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
+ data <<= 1;
+ scl_out(dd, i2c_line_high);
+ data |= sda_in(dd, 0);
+ scl_out(dd, i2c_line_low);
+ }
+ return data;
+}
+
+/**
+ * wr_byte - write a byte, one bit at a time
+ * @dd: the infinipath device
+ * @data: the byte to write
+ *
+ * Returns 0 if we got the following ack, otherwise 1
+ */
+static int wr_byte(struct ipath_devdata *dd, u8 data)
+{
+ int bit_cntr;
+ u8 bit;
+
+ for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
+ bit = (data >> bit_cntr) & 1;
+ sda_out(dd, bit);
+ scl_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_low);
+ }
+ return (!i2c_ackrcv(dd)) ? 1 : 0;
+}
+
+static void send_ack(struct ipath_devdata *dd)
+{
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_high);
+}
+
+/**
+ * i2c_startcmd - transmit the start condition, followed by address/cmd
+ * @dd: the infinipath device
+ * @offset_dir: direction byte
+ *
+ * (both clock/data high, clock high, data low while clock is high)
+ */
+static int i2c_startcmd(struct ipath_devdata *dd, u8 offset_dir)
+{
+ int res;
+
+ /* issue start sequence */
+ sda_out(dd, i2c_line_high);
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_low);
+
+ /* issue length and direction byte */
+ res = wr_byte(dd, offset_dir);
+
+ if (res)
+ ipath_cdbg(VERBOSE, "No ack to complete start\n");
+
+ return res;
+}
+
+/**
+ * stop_cmd - transmit the stop condition
+ * @dd: the infinipath device
+ *
+ * (both clock/data low, clock high, data high while clock is high)
+ */
+static void stop_cmd(struct ipath_devdata *dd)
+{
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_high);
+ udelay(2);
+}
+
+/**
+ * eeprom_reset - reset I2C communication
+ * @dd: the infinipath device
+ */
+
+static int eeprom_reset(struct ipath_devdata *dd)
+{
+ int clock_cycles_left = 9;
+ u64 *gpioval = &dd->ipath_gpio_out;
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
+ /* Make sure shadows are consistent */
+ dd->ipath_extctrl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extctrl);
+ *gpioval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_gpio_out);
+ spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
+
+ ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
+ "is %llx\n", (unsigned long long) *gpioval);
+
+ /*
+ * This is to get the i2c into a known state, by first going low,
+ * then tristate sda (and then tristate scl as first thing
+ * in loop)
+ */
+ scl_out(dd, i2c_line_low);
+ sda_out(dd, i2c_line_high);
+
+ /* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
+ while (clock_cycles_left--) {
+ scl_out(dd, i2c_line_high);
+
+ /* SDA seen high, issue START by dropping it while SCL high */
+ if (sda_in(dd, 0)) {
+ sda_out(dd, i2c_line_low);
+ scl_out(dd, i2c_line_low);
+ /* ATMEL spec says must be followed by STOP. */
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_high);
+ ret = 0;
+ goto bail;
+ }
+
+ scl_out(dd, i2c_line_low);
+ }
+
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/*
+ * Probe for I2C device at specified address. Returns 0 for "success"
+ * to match rest of this file.
+ * Leave bus in "reasonable" state for further commands.
+ */
+static int i2c_probe(struct ipath_devdata *dd, int devaddr)
+{
+ int ret = 0;
+
+ ret = eeprom_reset(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
+ devaddr);
+ return ret;
+ }
+ /*
+ * Reset no longer leaves bus in start condition, so normal
+ * i2c_startcmd() will do.
+ */
+ ret = i2c_startcmd(dd, devaddr | READ_CMD);
+ if (ret)
+ ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
+ devaddr);
+ else {
+ /*
+ * Device did respond. Complete a single-byte read, because some
+ * devices apparently cannot handle STOP immediately after they
+ * ACK the start-cmd.
+ */
+ int data;
+ data = rd_byte(dd);
+ stop_cmd(dd);
+ ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
+ }
+ return ret;
+}
+
+/*
+ * Returns the "i2c type". This is a pointer to a struct that describes
+ * the I2C chain on this board. To minimize impact on struct ipath_devdata,
+ * the (small integer) index into the table is actually memoized, rather
+ * then the pointer.
+ * Memoization is because the type is determined on the first call per chip.
+ * An alternative would be to move type determination to early
+ * init code.
+ */
+static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
+{
+ int idx;
+
+ /* Get memoized index, from previous successful probes */
+ idx = dd->ipath_i2c_chain_type - 1;
+ if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
+ goto done;
+
+ idx = 0;
+ while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
+ /* if probe succeeds, this is type */
+ if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
+ break;
+ ++idx;
+ }
+
+ /*
+ * Old EEPROM (first entry) may require a reset after probe,
+ * rather than being able to "start" after "stop"
+ */
+ if (idx == 0)
+ eeprom_reset(dd);
+
+ if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
+ idx = -1;
+ else
+ dd->ipath_i2c_chain_type = idx + 1;
+done:
+ return (idx >= 0) ? i2c_chains + idx : NULL;
+}
+
+static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
+ u8 eeprom_offset, void *buffer, int len)
+{
+ int ret;
+ struct i2c_chain_desc *icd;
+ u8 *bp = buffer;
+
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ /* legacy not-really-I2C */
+ ipath_cdbg(VERBOSE, "Start command only address\n");
+ eeprom_offset = (eeprom_offset << 1) | READ_CMD;
+ ret = i2c_startcmd(dd, eeprom_offset);
+ } else {
+ /* Actual I2C */
+ ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ stop_cmd(dd);
+ ret = 1;
+ goto bail;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM address\n");
+ ret = 1;
+ goto bail;
+ }
+ ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
+ }
+ if (ret) {
+ ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
+ stop_cmd(dd);
+ ret = 1;
+ goto bail;
+ }
+
+ /*
+ * eeprom keeps clocking data out as long as we ack, automatically
+ * incrementing the address.
+ */
+ while (len-- > 0) {
+ /* get and store data */
+ *bp++ = rd_byte(dd);
+ /* send ack if not the last byte */
+ if (len)
+ send_ack(dd);
+ }
+
+ stop_cmd(dd);
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
+ const void *buffer, int len)
+{
+ int sub_len;
+ const u8 *bp = buffer;
+ int max_wait_time, i;
+ int ret;
+ struct i2c_chain_desc *icd;
+
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ while (len > 0) {
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ if (i2c_startcmd(dd,
+ (eeprom_offset << 1) | WRITE_CMD)) {
+ ipath_dbg("Failed to start cmd offset %u\n",
+ eeprom_offset);
+ goto failed_write;
+ }
+ } else {
+ /* Real I2C */
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ goto failed_write;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM "
+ "address\n");
+ goto failed_write;
+ }
+ }
+
+ sub_len = min(len, 4);
+ eeprom_offset += sub_len;
+ len -= sub_len;
+
+ for (i = 0; i < sub_len; i++) {
+ if (wr_byte(dd, *bp++)) {
+ ipath_dbg("no ack after byte %u/%u (%u "
+ "total remain)\n", i, sub_len,
+ len + sub_len - i);
+ goto failed_write;
+ }
+ }
+
+ stop_cmd(dd);
+
+ /*
+ * wait for write complete by waiting for a successful
+ * read (the chip replies with a zero after the write
+ * cmd completes, and before it writes to the eeprom.
+ * The startcmd for the read will fail the ack until
+ * the writes have completed. We do this inline to avoid
+ * the debug prints that are in the real read routine
+ * if the startcmd fails.
+ * We also use the proper device address, so it doesn't matter
+ * whether we have real eeprom_dev. legacy likes any address.
+ */
+ max_wait_time = 100;
+ while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
+ stop_cmd(dd);
+ if (!--max_wait_time) {
+ ipath_dbg("Did not get successful read to "
+ "complete write\n");
+ goto failed_write;
+ }
+ }
+ /* now read (and ignore) the resulting byte */
+ rd_byte(dd);
+ stop_cmd(dd);
+ }
+
+ ret = 0;
+ goto bail;
+
+failed_write:
+ stop_cmd(dd);
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
+ */
+int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
+ void *buff, int len)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_eeprom_internal_read(dd, eeprom_offset, buff, len);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ return ret;
+}
+
+/**
+ * ipath_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
+int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
+ const void *buff, int len)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_eeprom_internal_write(dd, eeprom_offset, buff, len);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ return ret;
+}
+
+static u8 flash_csum(struct ipath_flash *ifp, int adjust)
+{
+ u8 *ip = (u8 *) ifp;
+ u8 csum = 0, len;
+
+ /*
+ * Limit length checksummed to max length of actual data.
+ * Checksum of erased eeprom will still be bad, but we avoid
+ * reading past the end of the buffer we were passed.
+ */
+ len = ifp->if_length;
+ if (len > sizeof(struct ipath_flash))
+ len = sizeof(struct ipath_flash);
+ while (len--)
+ csum += *ip++;
+ csum -= ifp->if_csum;
+ csum = ~csum;
+ if (adjust)
+ ifp->if_csum = csum;
+
+ return csum;
+}
+
+/**
+ * ipath_get_guid - get the GUID from the i2c device
+ * @dd: the infinipath device
+ *
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
+ */
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
+{
+ void *buf;
+ struct ipath_flash *ifp;
+ __be64 guid;
+ int len, eep_stat;
+ u8 csum, *bguid;
+ int t = dd->ipath_unit;
+ struct ipath_devdata *dd0 = ipath_lookup(0);
+
+ if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) {
+ u8 oguid;
+ dd->ipath_guid = dd0->ipath_guid;
+ bguid = (u8 *) & dd->ipath_guid;
+
+ oguid = bguid[7];
+ bguid[7] += t;
+ if (oguid > bguid[7]) {
+ if (bguid[6] == 0xff) {
+ if (bguid[5] == 0xff) {
+ ipath_dev_err(
+ dd,
+ "Can't set %s GUID from "
+ "base, wraps to OUI!\n",
+ ipath_get_unit_name(t));
+ dd->ipath_guid = 0;
+ goto bail;
+ }
+ bguid[5]++;
+ }
+ bguid[6]++;
+ }
+ dd->ipath_nguid = 1;
+
+ ipath_dbg("nguid %u, so adding %u to device 0 guid, "
+ "for %llx\n",
+ dd0->ipath_nguid, t,
+ (unsigned long long) be64_to_cpu(dd->ipath_guid));
+ goto bail;
+ }
+
+ /*
+ * read full flash, not just currently used part, since it may have
+ * been written with a newer definition
+ * */
+ len = sizeof(struct ipath_flash);
+ buf = vmalloc(len);
+ if (!buf) {
+ ipath_dev_err(dd, "Couldn't allocate memory to read %u "
+ "bytes from eeprom for GUID\n", len);
+ goto bail;
+ }
+
+ mutex_lock(&dd->ipath_eep_lock);
+ eep_stat = ipath_eeprom_internal_read(dd, 0, buf, len);
+ mutex_unlock(&dd->ipath_eep_lock);
+
+ if (eep_stat) {
+ ipath_dev_err(dd, "Failed reading GUID from eeprom\n");
+ goto done;
+ }
+ ifp = (struct ipath_flash *)buf;
+
+ csum = flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ dev_info(&dd->pcidev->dev, "Bad I2C flash checksum: "
+ "0x%x, not 0x%x\n", csum, ifp->if_csum);
+ goto done;
+ }
+ if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
+ *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
+ ipath_dev_err(dd, "Invalid GUID %llx from flash; "
+ "ignoring\n",
+ *(unsigned long long *) ifp->if_guid);
+ /* don't allow GUID if all 0 or all 1's */
+ goto done;
+ }
+
+ /* complain, but allow it */
+ if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
+ dev_info(&dd->pcidev->dev, "Warning, GUID %llx is "
+ "default, probably not correct!\n",
+ *(unsigned long long *) ifp->if_guid);
+
+ bguid = ifp->if_guid;
+ if (!bguid[0] && !bguid[1] && !bguid[2]) {
+ /* original incorrect GUID format in flash; fix in
+ * core copy, by shifting up 2 octets; don't need to
+ * change top octet, since both it and shifted are
+ * 0.. */
+ bguid[1] = bguid[3];
+ bguid[2] = bguid[4];
+ bguid[3] = bguid[4] = 0;
+ guid = *(__be64 *) ifp->if_guid;
+ ipath_cdbg(VERBOSE, "Old GUID format in flash, top 3 zero, "
+ "shifting 2 octets\n");
+ } else
+ guid = *(__be64 *) ifp->if_guid;
+ dd->ipath_guid = guid;
+ dd->ipath_nguid = ifp->if_numguid;
+ /*
+ * Things are slightly complicated by the desire to transparently
+ * support both the Pathscale 10-digit serial number and the QLogic
+ * 13-character version.
+ */
+ if ((ifp->if_fversion > 1) && ifp->if_sprefix[0]
+ && ((u8 *)ifp->if_sprefix)[0] != 0xFF) {
+ /* This board has a Serial-prefix, which is stored
+ * elsewhere for backward-compatibility.
+ */
+ char *snp = dd->ipath_serial;
+ memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
+ snp[sizeof ifp->if_sprefix] = '\0';
+ len = strlen(snp);
+ snp += len;
+ len = (sizeof dd->ipath_serial) - len;
+ if (len > sizeof ifp->if_serial) {
+ len = sizeof ifp->if_serial;
+ }
+ memcpy(snp, ifp->if_serial, len);
+ } else
+ memcpy(dd->ipath_serial, ifp->if_serial,
+ sizeof ifp->if_serial);
+ if (!strstr(ifp->if_comment, "Tested successfully"))
+ ipath_dev_err(dd, "Board SN %s did not pass functional "
+ "test: %s\n", dd->ipath_serial,
+ ifp->if_comment);
+
+ ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
+ (unsigned long long) be64_to_cpu(dd->ipath_guid));
+
+ memcpy(&dd->ipath_eep_st_errs, &ifp->if_errcntp, IPATH_EEP_LOG_CNT);
+ /*
+ * Power-on (actually "active") hours are kept as little-endian value
+ * in EEPROM, but as seconds in a (possibly as small as 24-bit)
+ * atomic_t while running.
+ */
+ atomic_set(&dd->ipath_active_time, 0);
+ dd->ipath_eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
+
+done:
+ vfree(buf);
+
+bail:;
+}
+
+/**
+ * ipath_update_eeprom_log - copy active-time and error counters to eeprom
+ * @dd: the infinipath device
+ *
+ * Although the time is kept as seconds in the ipath_devdata struct, it is
+ * rounded to hours for re-write, as we have only 16 bits in EEPROM.
+ * First-cut code reads whole (expected) struct ipath_flash, modifies,
+ * re-writes. Future direction: read/write only what we need, assuming
+ * that the EEPROM had to have been "good enough" for driver init, and
+ * if not, we aren't making it worse.
+ *
+ */
+
+int ipath_update_eeprom_log(struct ipath_devdata *dd)
+{
+ void *buf;
+ struct ipath_flash *ifp;
+ int len, hi_water;
+ uint32_t new_time, new_hrs;
+ u8 csum;
+ int ret, idx;
+ unsigned long flags;
+
+ /* first, check if we actually need to do anything. */
+ ret = 0;
+ for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
+ if (dd->ipath_eep_st_new_errs[idx]) {
+ ret = 1;
+ break;
+ }
+ }
+ new_time = atomic_read(&dd->ipath_active_time);
+
+ if (ret == 0 && new_time < 3600)
+ return 0;
+
+ /*
+ * The quick-check above determined that there is something worthy
+ * of logging, so get current contents and do a more detailed idea.
+ * read full flash, not just currently used part, since it may have
+ * been written with a newer definition
+ */
+ len = sizeof(struct ipath_flash);
+ buf = vmalloc(len);
+ ret = 1;
+ if (!buf) {
+ ipath_dev_err(dd, "Couldn't allocate memory to read %u "
+ "bytes from eeprom for logging\n", len);
+ goto bail;
+ }
+
+ /* Grab semaphore and read current EEPROM. If we get an
+ * error, let go, but if not, keep it until we finish write.
+ */
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (ret) {
+ ipath_dev_err(dd, "Unable to acquire EEPROM for logging\n");
+ goto free_bail;
+ }
+ ret = ipath_eeprom_internal_read(dd, 0, buf, len);
+ if (ret) {
+ mutex_unlock(&dd->ipath_eep_lock);
+ ipath_dev_err(dd, "Unable read EEPROM for logging\n");
+ goto free_bail;
+ }
+ ifp = (struct ipath_flash *)buf;
+
+ csum = flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ mutex_unlock(&dd->ipath_eep_lock);
+ ipath_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
+ csum, ifp->if_csum);
+ ret = 1;
+ goto free_bail;
+ }
+ hi_water = 0;
+ spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
+ for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
+ int new_val = dd->ipath_eep_st_new_errs[idx];
+ if (new_val) {
+ /*
+ * If we have seen any errors, add to EEPROM values
+ * We need to saturate at 0xFF (255) and we also
+ * would need to adjust the checksum if we were
+ * trying to minimize EEPROM traffic
+ * Note that we add to actual current count in EEPROM,
+ * in case it was altered while we were running.
+ */
+ new_val += ifp->if_errcntp[idx];
+ if (new_val > 0xFF)
+ new_val = 0xFF;
+ if (ifp->if_errcntp[idx] != new_val) {
+ ifp->if_errcntp[idx] = new_val;
+ hi_water = offsetof(struct ipath_flash,
+ if_errcntp) + idx;
+ }
+ /*
+ * update our shadow (used to minimize EEPROM
+ * traffic), to match what we are about to write.
+ */
+ dd->ipath_eep_st_errs[idx] = new_val;
+ dd->ipath_eep_st_new_errs[idx] = 0;
+ }
+ }
+ /*
+ * now update active-time. We would like to round to the nearest hour
+ * but unless atomic_t are sure to be proper signed ints we cannot,
+ * because we need to account for what we "transfer" to EEPROM and
+ * if we log an hour at 31 minutes, then we would need to set
+ * active_time to -29 to accurately count the _next_ hour.
+ */
+ if (new_time >= 3600) {
+ new_hrs = new_time / 3600;
+ atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
+ new_hrs += dd->ipath_eep_hrs;
+ if (new_hrs > 0xFFFF)
+ new_hrs = 0xFFFF;
+ dd->ipath_eep_hrs = new_hrs;
+ if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
+ ifp->if_powerhour[0] = new_hrs & 0xFF;
+ hi_water = offsetof(struct ipath_flash, if_powerhour);
+ }
+ if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
+ ifp->if_powerhour[1] = new_hrs >> 8;
+ hi_water = offsetof(struct ipath_flash, if_powerhour)
+ + 1;
+ }
+ }
+ /*
+ * There is a tiny possibility that we could somehow fail to write
+ * the EEPROM after updating our shadows, but problems from holding
+ * the spinlock too long are a much bigger issue.
+ */
+ spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
+ if (hi_water) {
+ /* we made some change to the data, uopdate cksum and write */
+ csum = flash_csum(ifp, 1);
+ ret = ipath_eeprom_internal_write(dd, 0, buf, hi_water + 1);
+ }
+ mutex_unlock(&dd->ipath_eep_lock);
+ if (ret)
+ ipath_dev_err(dd, "Failed updating EEPROM\n");
+
+free_bail:
+ vfree(buf);
+bail:
+ return ret;
+
+}
+
+/**
+ * ipath_inc_eeprom_err - increment one of the four error counters
+ * that are logged to EEPROM.
+ * @dd: the infinipath device
+ * @eidx: 0..3, the counter to increment
+ * @incr: how much to add
+ *
+ * Each counter is 8-bits, and saturates at 255 (0xFF). They
+ * are copied to the EEPROM (aka flash) whenever ipath_update_eeprom_log()
+ * is called, but it can only be called in a context that allows sleep.
+ * This function can be called even at interrupt level.
+ */
+
+void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr)
+{
+ uint new_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
+ new_val = dd->ipath_eep_st_new_errs[eidx] + incr;
+ if (new_val > 255)
+ new_val = 255;
+ dd->ipath_eep_st_new_errs[eidx] = new_val;
+ spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
+ return;
+}
+
+static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+ struct i2c_chain_desc *icd;
+
+ ret = -ENOENT;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
+ ipath_dbg("Failed tempsense RD startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ /*
+ * We can only clock out one byte per command, sensibly
+ */
+ ret = rd_byte(dd);
+ stop_cmd(dd);
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_RD_REG_MASK 0xBF
+
+/**
+ * ipath_tempsense_read - read register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to read from
+ *
+ * returns reg contents (0..255) or < 0 for error
+ */
+int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+
+ if (regnum > 7)
+ return -EINVAL;
+
+ /* return a bogus value for (the one) register we do not have */
+ if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
+ return 0;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_read(dd, regnum);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is actual value (0..255)
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
+
+static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
+ u8 regnum, u8 data)
+{
+ int ret = -ENOENT;
+ struct i2c_chain_desc *icd;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ if (ret) {
+ stop_cmd(dd);
+ ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, data);
+ stop_cmd(dd);
+ ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
+ regnum);
+ ret = -ENXIO;
+ }
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
+
+/**
+ * ipath_tempsense_write - write register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to write
+ * @data: data to write
+ *
+ * returns 0 for success or < 0 for error
+ */
+int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
+{
+ int ret;
+
+ if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
+ return -EINVAL;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_write(dd, regnum, data);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is 0 for success
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/cdev.h>
+#include <linux/swap.h>
+#include <linux/export.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/cpu.h>
+#include <linux/uio.h>
+#include <asm/pgtable.h>
+
+#include "ipath_kernel.h"
+#include "ipath_common.h"
+#include "ipath_user_sdma.h"
+
+static int ipath_open(struct inode *, struct file *);
+static int ipath_close(struct inode *, struct file *);
+static ssize_t ipath_write(struct file *, const char __user *, size_t,
+ loff_t *);
+static ssize_t ipath_write_iter(struct kiocb *, struct iov_iter *from);
+static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
+static int ipath_mmap(struct file *, struct vm_area_struct *);
+
+/*
+ * This is really, really weird shit - write() and writev() here
+ * have completely unrelated semantics. Sucky userland ABI,
+ * film at 11.
+ */
+static const struct file_operations ipath_file_ops = {
+ .owner = THIS_MODULE,
+ .write = ipath_write,
+ .write_iter = ipath_write_iter,
+ .open = ipath_open,
+ .release = ipath_close,
+ .poll = ipath_poll,
+ .mmap = ipath_mmap,
+ .llseek = noop_llseek,
+};
+
+/*
+ * Convert kernel virtual addresses to physical addresses so they don't
+ * potentially conflict with the chip addresses used as mmap offsets.
+ * It doesn't really matter what mmap offset we use as long as we can
+ * interpret it correctly.
+ */
+static u64 cvt_kvaddr(void *p)
+{
+ struct page *page;
+ u64 paddr = 0;
+
+ page = vmalloc_to_page(p);
+ if (page)
+ paddr = page_to_pfn(page) << PAGE_SHIFT;
+
+ return paddr;
+}
+
+static int ipath_get_base_info(struct file *fp,
+ void __user *ubase, size_t ubase_size)
+{
+ struct ipath_portdata *pd = port_fp(fp);
+ int ret = 0;
+ struct ipath_base_info *kinfo = NULL;
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned subport_cnt;
+ int shared, master;
+ size_t sz;
+
+ subport_cnt = pd->port_subport_cnt;
+ if (!subport_cnt) {
+ shared = 0;
+ master = 0;
+ subport_cnt = 1;
+ } else {
+ shared = 1;
+ master = !subport_fp(fp);
+ }
+
+ sz = sizeof(*kinfo);
+ /* If port sharing is not requested, allow the old size structure */
+ if (!shared)
+ sz -= 7 * sizeof(u64);
+ if (ubase_size < sz) {
+ ipath_cdbg(PROC,
+ "Base size %zu, need %zu (version mismatch?)\n",
+ ubase_size, sz);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ kinfo = kzalloc(sizeof(*kinfo), GFP_KERNEL);
+ if (kinfo == NULL) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ ret = dd->ipath_f_get_base_info(pd, kinfo);
+ if (ret < 0)
+ goto bail;
+
+ kinfo->spi_rcvhdr_cnt = dd->ipath_rcvhdrcnt;
+ kinfo->spi_rcvhdrent_size = dd->ipath_rcvhdrentsize;
+ kinfo->spi_tidegrcnt = dd->ipath_rcvegrcnt;
+ kinfo->spi_rcv_egrbufsize = dd->ipath_rcvegrbufsize;
+ /*
+ * have to mmap whole thing
+ */
+ kinfo->spi_rcv_egrbuftotlen =
+ pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
+ kinfo->spi_rcv_egrperchunk = pd->port_rcvegrbufs_perchunk;
+ kinfo->spi_rcv_egrchunksize = kinfo->spi_rcv_egrbuftotlen /
+ pd->port_rcvegrbuf_chunks;
+ kinfo->spi_tidcnt = dd->ipath_rcvtidcnt / subport_cnt;
+ if (master)
+ kinfo->spi_tidcnt += dd->ipath_rcvtidcnt % subport_cnt;
+ /*
+ * for this use, may be ipath_cfgports summed over all chips that
+ * are are configured and present
+ */
+ kinfo->spi_nports = dd->ipath_cfgports;
+ /* unit (chip/board) our port is on */
+ kinfo->spi_unit = dd->ipath_unit;
+ /* for now, only a single page */
+ kinfo->spi_tid_maxsize = PAGE_SIZE;
+
+ /*
+ * Doing this per port, and based on the skip value, etc. This has
+ * to be the actual buffer size, since the protocol code treats it
+ * as an array.
+ *
+ * These have to be set to user addresses in the user code via mmap.
+ * These values are used on return to user code for the mmap target
+ * addresses only. For 32 bit, same 44 bit address problem, so use
+ * the physical address, not virtual. Before 2.6.11, using the
+ * page_address() macro worked, but in 2.6.11, even that returns the
+ * full 64 bit address (upper bits all 1's). So far, using the
+ * physical addresses (or chip offsets, for chip mapping) works, but
+ * no doubt some future kernel release will change that, and we'll be
+ * on to yet another method of dealing with this.
+ */
+ kinfo->spi_rcvhdr_base = (u64) pd->port_rcvhdrq_phys;
+ kinfo->spi_rcvhdr_tailaddr = (u64) pd->port_rcvhdrqtailaddr_phys;
+ kinfo->spi_rcv_egrbufs = (u64) pd->port_rcvegr_phys;
+ kinfo->spi_pioavailaddr = (u64) dd->ipath_pioavailregs_phys;
+ kinfo->spi_status = (u64) kinfo->spi_pioavailaddr +
+ (void *) dd->ipath_statusp -
+ (void *) dd->ipath_pioavailregs_dma;
+ if (!shared) {
+ kinfo->spi_piocnt = pd->port_piocnt;
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs;
+ kinfo->__spi_uregbase = (u64) dd->ipath_uregbase +
+ dd->ipath_ureg_align * pd->port_port;
+ } else if (master) {
+ kinfo->spi_piocnt = (pd->port_piocnt / subport_cnt) +
+ (pd->port_piocnt % subport_cnt);
+ /* Master's PIO buffers are after all the slave's */
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs +
+ dd->ipath_palign *
+ (pd->port_piocnt - kinfo->spi_piocnt);
+ } else {
+ unsigned slave = subport_fp(fp) - 1;
+
+ kinfo->spi_piocnt = pd->port_piocnt / subport_cnt;
+ kinfo->spi_piobufbase = (u64) pd->port_piobufs +
+ dd->ipath_palign * kinfo->spi_piocnt * slave;
+ }
+
+ if (shared) {
+ kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
+ dd->ipath_ureg_align * pd->port_port;
+ kinfo->spi_port_rcvegrbuf = kinfo->spi_rcv_egrbufs;
+ kinfo->spi_port_rcvhdr_base = kinfo->spi_rcvhdr_base;
+ kinfo->spi_port_rcvhdr_tailaddr = kinfo->spi_rcvhdr_tailaddr;
+
+ kinfo->__spi_uregbase = cvt_kvaddr(pd->subport_uregbase +
+ PAGE_SIZE * subport_fp(fp));
+
+ kinfo->spi_rcvhdr_base = cvt_kvaddr(pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * subport_fp(fp));
+ kinfo->spi_rcvhdr_tailaddr = 0;
+ kinfo->spi_rcv_egrbufs = cvt_kvaddr(pd->subport_rcvegrbuf +
+ pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size *
+ subport_fp(fp));
+
+ kinfo->spi_subport_uregbase =
+ cvt_kvaddr(pd->subport_uregbase);
+ kinfo->spi_subport_rcvegrbuf =
+ cvt_kvaddr(pd->subport_rcvegrbuf);
+ kinfo->spi_subport_rcvhdr_base =
+ cvt_kvaddr(pd->subport_rcvhdr_base);
+ ipath_cdbg(PROC, "port %u flags %x %llx %llx %llx\n",
+ kinfo->spi_port, kinfo->spi_runtime_flags,
+ (unsigned long long) kinfo->spi_subport_uregbase,
+ (unsigned long long) kinfo->spi_subport_rcvegrbuf,
+ (unsigned long long) kinfo->spi_subport_rcvhdr_base);
+ }
+
+ /*
+ * All user buffers are 2KB buffers. If we ever support
+ * giving 4KB buffers to user processes, this will need some
+ * work.
+ */
+ kinfo->spi_pioindex = (kinfo->spi_piobufbase -
+ (dd->ipath_piobufbase & 0xffffffff)) / dd->ipath_palign;
+ kinfo->spi_pioalign = dd->ipath_palign;
+
+ kinfo->spi_qpair = IPATH_KD_QP;
+ /*
+ * user mode PIO buffers are always 2KB, even when 4KB can
+ * be received, and sent via the kernel; this is ibmaxlen
+ * for 2K MTU.
+ */
+ kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
+ kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
+ kinfo->spi_port = pd->port_port;
+ kinfo->spi_subport = subport_fp(fp);
+ kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
+ kinfo->spi_hw_version = dd->ipath_revision;
+
+ if (master) {
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_MASTER;
+ }
+
+ sz = (ubase_size < sizeof(*kinfo)) ? ubase_size : sizeof(*kinfo);
+ if (copy_to_user(ubase, kinfo, sz))
+ ret = -EFAULT;
+
+bail:
+ kfree(kinfo);
+ return ret;
+}
+
+/**
+ * ipath_tid_update - update a port TID
+ * @pd: the port
+ * @fp: the ipath device file
+ * @ti: the TID information
+ *
+ * The new implementation as of Oct 2004 is that the driver assigns
+ * the tid and returns it to the caller. To make it easier to
+ * catch bugs, and to reduce search time, we keep a cursor for
+ * each port, walking the shadow tid array to find one that's not
+ * in use.
+ *
+ * For now, if we can't allocate the full list, we fail, although
+ * in the long run, we'll allocate as many as we can, and the
+ * caller will deal with that by trying the remaining pages later.
+ * That means that when we fail, we have to mark the tids as not in
+ * use again, in our shadow copy.
+ *
+ * It's up to the caller to free the tids when they are done.
+ * We'll unlock the pages as they free them.
+ *
+ * Also, right now we are locking one page at a time, but since
+ * the intended use of this routine is for a single group of
+ * virtually contiguous pages, that should change to improve
+ * performance.
+ */
+static int ipath_tid_update(struct ipath_portdata *pd, struct file *fp,
+ const struct ipath_tid_info *ti)
+{
+ int ret = 0, ntids;
+ u32 tid, porttid, cnt, i, tidcnt, tidoff;
+ u16 *tidlist;
+ struct ipath_devdata *dd = pd->port_dd;
+ u64 physaddr;
+ unsigned long vaddr;
+ u64 __iomem *tidbase;
+ unsigned long tidmap[8];
+ struct page **pagep = NULL;
+ unsigned subport = subport_fp(fp);
+
+ if (!dd->ipath_pageshadow) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ cnt = ti->tidcnt;
+ if (!cnt) {
+ ipath_dbg("After copyin, tidcnt 0, tidlist %llx\n",
+ (unsigned long long) ti->tidlist);
+ /*
+ * Should we treat as success? likely a bug
+ */
+ ret = -EFAULT;
+ goto done;
+ }
+ porttid = pd->port_port * dd->ipath_rcvtidcnt;
+ if (!pd->port_subport_cnt) {
+ tidcnt = dd->ipath_rcvtidcnt;
+ tid = pd->port_tidcursor;
+ tidoff = 0;
+ } else if (!subport) {
+ tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
+ (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
+ tidoff = dd->ipath_rcvtidcnt - tidcnt;
+ porttid += tidoff;
+ tid = tidcursor_fp(fp);
+ } else {
+ tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
+ tidoff = tidcnt * (subport - 1);
+ porttid += tidoff;
+ tid = tidcursor_fp(fp);
+ }
+ if (cnt > tidcnt) {
+ /* make sure it all fits in port_tid_pg_list */
+ dev_info(&dd->pcidev->dev, "Process tried to allocate %u "
+ "TIDs, only trying max (%u)\n", cnt, tidcnt);
+ cnt = tidcnt;
+ }
+ pagep = &((struct page **) pd->port_tid_pg_list)[tidoff];
+ tidlist = &((u16 *) &pagep[dd->ipath_rcvtidcnt])[tidoff];
+
+ memset(tidmap, 0, sizeof(tidmap));
+ /* before decrement; chip actual # */
+ ntids = tidcnt;
+ tidbase = (u64 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
+ dd->ipath_rcvtidbase +
+ porttid * sizeof(*tidbase));
+
+ ipath_cdbg(VERBOSE, "Port%u %u tids, cursor %u, tidbase %p\n",
+ pd->port_port, cnt, tid, tidbase);
+
+ /* virtual address of first page in transfer */
+ vaddr = ti->tidvaddr;
+ if (!access_ok(VERIFY_WRITE, (void __user *) vaddr,
+ cnt * PAGE_SIZE)) {
+ ipath_dbg("Fail vaddr %p, %u pages, !access_ok\n",
+ (void *)vaddr, cnt);
+ ret = -EFAULT;
+ goto done;
+ }
+ ret = ipath_get_user_pages(vaddr, cnt, pagep);
+ if (ret) {
+ if (ret == -EBUSY) {
+ ipath_dbg("Failed to lock addr %p, %u pages "
+ "(already locked)\n",
+ (void *) vaddr, cnt);
+ /*
+ * for now, continue, and see what happens but with
+ * the new implementation, this should never happen,
+ * unless perhaps the user has mpin'ed the pages
+ * themselves (something we need to test)
+ */
+ ret = 0;
+ } else {
+ dev_info(&dd->pcidev->dev,
+ "Failed to lock addr %p, %u pages: "
+ "errno %d\n", (void *) vaddr, cnt, -ret);
+ goto done;
+ }
+ }
+ for (i = 0; i < cnt; i++, vaddr += PAGE_SIZE) {
+ for (; ntids--; tid++) {
+ if (tid == tidcnt)
+ tid = 0;
+ if (!dd->ipath_pageshadow[porttid + tid])
+ break;
+ }
+ if (ntids < 0) {
+ /*
+ * oops, wrapped all the way through their TIDs,
+ * and didn't have enough free; see comments at
+ * start of routine
+ */
+ ipath_dbg("Not enough free TIDs for %u pages "
+ "(index %d), failing\n", cnt, i);
+ i--; /* last tidlist[i] not filled in */
+ ret = -ENOMEM;
+ break;
+ }
+ tidlist[i] = tid + tidoff;
+ ipath_cdbg(VERBOSE, "Updating idx %u to TID %u, "
+ "vaddr %lx\n", i, tid + tidoff, vaddr);
+ /* we "know" system pages and TID pages are same size */
+ dd->ipath_pageshadow[porttid + tid] = pagep[i];
+ dd->ipath_physshadow[porttid + tid] = ipath_map_page(
+ dd->pcidev, pagep[i], 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ /*
+ * don't need atomic or it's overhead
+ */
+ __set_bit(tid, tidmap);
+ physaddr = dd->ipath_physshadow[porttid + tid];
+ ipath_stats.sps_pagelocks++;
+ ipath_cdbg(VERBOSE,
+ "TID %u, vaddr %lx, physaddr %llx pgp %p\n",
+ tid, vaddr, (unsigned long long) physaddr,
+ pagep[i]);
+ dd->ipath_f_put_tid(dd, &tidbase[tid], RCVHQ_RCV_TYPE_EXPECTED,
+ physaddr);
+ /*
+ * don't check this tid in ipath_portshadow, since we
+ * just filled it in; start with the next one.
+ */
+ tid++;
+ }
+
+ if (ret) {
+ u32 limit;
+ cleanup:
+ /* jump here if copy out of updated info failed... */
+ ipath_dbg("After failure (ret=%d), undo %d of %d entries\n",
+ -ret, i, cnt);
+ /* same code that's in ipath_free_tid() */
+ limit = sizeof(tidmap) * BITS_PER_BYTE;
+ if (limit > tidcnt)
+ /* just in case size changes in future */
+ limit = tidcnt;
+ tid = find_first_bit((const unsigned long *)tidmap, limit);
+ for (; tid < limit; tid++) {
+ if (!test_bit(tid, tidmap))
+ continue;
+ if (dd->ipath_pageshadow[porttid + tid]) {
+ ipath_cdbg(VERBOSE, "Freeing TID %u\n",
+ tid);
+ dd->ipath_f_put_tid(dd, &tidbase[tid],
+ RCVHQ_RCV_TYPE_EXPECTED,
+ dd->ipath_tidinvalid);
+ pci_unmap_page(dd->pcidev,
+ dd->ipath_physshadow[porttid + tid],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ dd->ipath_pageshadow[porttid + tid] = NULL;
+ ipath_stats.sps_pageunlocks++;
+ }
+ }
+ ipath_release_user_pages(pagep, cnt);
+ } else {
+ /*
+ * Copy the updated array, with ipath_tid's filled in, back
+ * to user. Since we did the copy in already, this "should
+ * never fail" If it does, we have to clean up...
+ */
+ if (copy_to_user((void __user *)
+ (unsigned long) ti->tidlist,
+ tidlist, cnt * sizeof(*tidlist))) {
+ ret = -EFAULT;
+ goto cleanup;
+ }
+ if (copy_to_user((void __user *) (unsigned long) ti->tidmap,
+ tidmap, sizeof tidmap)) {
+ ret = -EFAULT;
+ goto cleanup;
+ }
+ if (tid == tidcnt)
+ tid = 0;
+ if (!pd->port_subport_cnt)
+ pd->port_tidcursor = tid;
+ else
+ tidcursor_fp(fp) = tid;
+ }
+
+done:
+ if (ret)
+ ipath_dbg("Failed to map %u TID pages, failing with %d\n",
+ ti->tidcnt, -ret);
+ return ret;
+}
+
+/**
+ * ipath_tid_free - free a port TID
+ * @pd: the port
+ * @subport: the subport
+ * @ti: the TID info
+ *
+ * right now we are unlocking one page at a time, but since
+ * the intended use of this routine is for a single group of
+ * virtually contiguous pages, that should change to improve
+ * performance. We check that the TID is in range for this port
+ * but otherwise don't check validity; if user has an error and
+ * frees the wrong tid, it's only their own data that can thereby
+ * be corrupted. We do check that the TID was in use, for sanity
+ * We always use our idea of the saved address, not the address that
+ * they pass in to us.
+ */
+
+static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
+ const struct ipath_tid_info *ti)
+{
+ int ret = 0;
+ u32 tid, porttid, cnt, limit, tidcnt;
+ struct ipath_devdata *dd = pd->port_dd;
+ u64 __iomem *tidbase;
+ unsigned long tidmap[8];
+
+ if (!dd->ipath_pageshadow) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ if (copy_from_user(tidmap, (void __user *)(unsigned long)ti->tidmap,
+ sizeof tidmap)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ porttid = pd->port_port * dd->ipath_rcvtidcnt;
+ if (!pd->port_subport_cnt)
+ tidcnt = dd->ipath_rcvtidcnt;
+ else if (!subport) {
+ tidcnt = (dd->ipath_rcvtidcnt / pd->port_subport_cnt) +
+ (dd->ipath_rcvtidcnt % pd->port_subport_cnt);
+ porttid += dd->ipath_rcvtidcnt - tidcnt;
+ } else {
+ tidcnt = dd->ipath_rcvtidcnt / pd->port_subport_cnt;
+ porttid += tidcnt * (subport - 1);
+ }
+ tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
+ dd->ipath_rcvtidbase +
+ porttid * sizeof(*tidbase));
+
+ limit = sizeof(tidmap) * BITS_PER_BYTE;
+ if (limit > tidcnt)
+ /* just in case size changes in future */
+ limit = tidcnt;
+ tid = find_first_bit(tidmap, limit);
+ ipath_cdbg(VERBOSE, "Port%u free %u tids; first bit (max=%d) "
+ "set is %d, porttid %u\n", pd->port_port, ti->tidcnt,
+ limit, tid, porttid);
+ for (cnt = 0; tid < limit; tid++) {
+ /*
+ * small optimization; if we detect a run of 3 or so without
+ * any set, use find_first_bit again. That's mainly to
+ * accelerate the case where we wrapped, so we have some at
+ * the beginning, and some at the end, and a big gap
+ * in the middle.
+ */
+ if (!test_bit(tid, tidmap))
+ continue;
+ cnt++;
+ if (dd->ipath_pageshadow[porttid + tid]) {
+ struct page *p;
+ p = dd->ipath_pageshadow[porttid + tid];
+ dd->ipath_pageshadow[porttid + tid] = NULL;
+ ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
+ pid_nr(pd->port_pid), tid);
+ dd->ipath_f_put_tid(dd, &tidbase[tid],
+ RCVHQ_RCV_TYPE_EXPECTED,
+ dd->ipath_tidinvalid);
+ pci_unmap_page(dd->pcidev,
+ dd->ipath_physshadow[porttid + tid],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ipath_release_user_pages(&p, 1);
+ ipath_stats.sps_pageunlocks++;
+ } else
+ ipath_dbg("Unused tid %u, ignoring\n", tid);
+ }
+ if (cnt != ti->tidcnt)
+ ipath_dbg("passed in tidcnt %d, only %d bits set in map\n",
+ ti->tidcnt, cnt);
+done:
+ if (ret)
+ ipath_dbg("Failed to unmap %u TID pages, failing with %d\n",
+ ti->tidcnt, -ret);
+ return ret;
+}
+
+/**
+ * ipath_set_part_key - set a partition key
+ * @pd: the port
+ * @key: the key
+ *
+ * We can have up to 4 active at a time (other than the default, which is
+ * always allowed). This is somewhat tricky, since multiple ports may set
+ * the same key, so we reference count them, and clean up at exit. All 4
+ * partition keys are packed into a single infinipath register. It's an
+ * error for a process to set the same pkey multiple times. We provide no
+ * mechanism to de-allocate a pkey at this time, we may eventually need to
+ * do that. I've used the atomic operations, and no locking, and only make
+ * a single pass through what's available. This should be more than
+ * adequate for some time. I'll think about spinlocks or the like if and as
+ * it's necessary.
+ */
+static int ipath_set_part_key(struct ipath_portdata *pd, u16 key)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ int i, any = 0, pidx = -1;
+ u16 lkey = key & 0x7FFF;
+ int ret;
+
+ if (lkey == (IPATH_DEFAULT_P_KEY & 0x7FFF)) {
+ /* nothing to do; this key always valid */
+ ret = 0;
+ goto bail;
+ }
+
+ ipath_cdbg(VERBOSE, "p%u try to set pkey %hx, current keys "
+ "%hx:%x %hx:%x %hx:%x %hx:%x\n",
+ pd->port_port, key, dd->ipath_pkeys[0],
+ atomic_read(&dd->ipath_pkeyrefs[0]), dd->ipath_pkeys[1],
+ atomic_read(&dd->ipath_pkeyrefs[1]), dd->ipath_pkeys[2],
+ atomic_read(&dd->ipath_pkeyrefs[2]), dd->ipath_pkeys[3],
+ atomic_read(&dd->ipath_pkeyrefs[3]));
+
+ if (!lkey) {
+ ipath_cdbg(PROC, "p%u tries to set key 0, not allowed\n",
+ pd->port_port);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ /*
+ * Set the full membership bit, because it has to be
+ * set in the register or the packet, and it seems
+ * cleaner to set in the register than to force all
+ * callers to set it. (see bug 4331)
+ */
+ key |= 0x8000;
+
+ for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
+ if (!pd->port_pkeys[i] && pidx == -1)
+ pidx = i;
+ if (pd->port_pkeys[i] == key) {
+ ipath_cdbg(VERBOSE, "p%u tries to set same pkey "
+ "(%x) more than once\n",
+ pd->port_port, key);
+ ret = -EEXIST;
+ goto bail;
+ }
+ }
+ if (pidx == -1) {
+ ipath_dbg("All pkeys for port %u already in use, "
+ "can't set %x\n", pd->port_port, key);
+ ret = -EBUSY;
+ goto bail;
+ }
+ for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i]) {
+ any++;
+ continue;
+ }
+ if (dd->ipath_pkeys[i] == key) {
+ atomic_t *pkrefs = &dd->ipath_pkeyrefs[i];
+
+ if (atomic_inc_return(pkrefs) > 1) {
+ pd->port_pkeys[pidx] = key;
+ ipath_cdbg(VERBOSE, "p%u set key %x "
+ "matches #%d, count now %d\n",
+ pd->port_port, key, i,
+ atomic_read(pkrefs));
+ ret = 0;
+ goto bail;
+ } else {
+ /*
+ * lost race, decrement count, catch below
+ */
+ atomic_dec(pkrefs);
+ ipath_cdbg(VERBOSE, "Lost race, count was "
+ "0, after dec, it's %d\n",
+ atomic_read(pkrefs));
+ any++;
+ }
+ }
+ if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
+ /*
+ * It makes no sense to have both the limited and
+ * full membership PKEY set at the same time since
+ * the unlimited one will disable the limited one.
+ */
+ ret = -EEXIST;
+ goto bail;
+ }
+ }
+ if (!any) {
+ ipath_dbg("port %u, all pkeys already in use, "
+ "can't set %x\n", pd->port_port, key);
+ ret = -EBUSY;
+ goto bail;
+ }
+ for (any = i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i] &&
+ atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
+ u64 pkey;
+
+ /* for ipathstats, etc. */
+ ipath_stats.sps_pkeys[i] = lkey;
+ pd->port_pkeys[pidx] = dd->ipath_pkeys[i] = key;
+ pkey =
+ (u64) dd->ipath_pkeys[0] |
+ ((u64) dd->ipath_pkeys[1] << 16) |
+ ((u64) dd->ipath_pkeys[2] << 32) |
+ ((u64) dd->ipath_pkeys[3] << 48);
+ ipath_cdbg(PROC, "p%u set key %x in #%d, "
+ "portidx %d, new pkey reg %llx\n",
+ pd->port_port, key, i, pidx,
+ (unsigned long long) pkey);
+ ipath_write_kreg(
+ dd, dd->ipath_kregs->kr_partitionkey, pkey);
+
+ ret = 0;
+ goto bail;
+ }
+ }
+ ipath_dbg("port %u, all pkeys already in use 2nd pass, "
+ "can't set %x\n", pd->port_port, key);
+ ret = -EBUSY;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_manage_rcvq - manage a port's receive queue
+ * @pd: the port
+ * @subport: the subport
+ * @start_stop: action to carry out
+ *
+ * start_stop == 0 disables receive on the port, for use in queue
+ * overflow conditions. start_stop==1 re-enables, to be used to
+ * re-init the software copy of the head register
+ */
+static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
+ int start_stop)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+
+ ipath_cdbg(PROC, "%sabling rcv for unit %u port %u:%u\n",
+ start_stop ? "en" : "dis", dd->ipath_unit,
+ pd->port_port, subport);
+ if (subport)
+ goto bail;
+ /* atomically clear receive enable port. */
+ if (start_stop) {
+ /*
+ * On enable, force in-memory copy of the tail register to
+ * 0, so that protocol code doesn't have to worry about
+ * whether or not the chip has yet updated the in-memory
+ * copy or not on return from the system call. The chip
+ * always resets it's tail register back to 0 on a
+ * transition from disabled to enabled. This could cause a
+ * problem if software was broken, and did the enable w/o
+ * the disable, but eventually the in-memory copy will be
+ * updated and correct itself, even in the face of software
+ * bugs.
+ */
+ if (pd->port_rcvhdrtail_kvaddr)
+ ipath_clear_rcvhdrtail(pd);
+ set_bit(dd->ipath_r_portenable_shift + pd->port_port,
+ &dd->ipath_rcvctrl);
+ } else
+ clear_bit(dd->ipath_r_portenable_shift + pd->port_port,
+ &dd->ipath_rcvctrl);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ /* now be sure chip saw it before we return */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ if (start_stop) {
+ /*
+ * And try to be sure that tail reg update has happened too.
+ * This should in theory interlock with the RXE changes to
+ * the tail register. Don't assign it to the tail register
+ * in memory copy, since we could overwrite an update by the
+ * chip if we did.
+ */
+ ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
+ }
+ /* always; new head should be equal to new tail; see above */
+bail:
+ return 0;
+}
+
+static void ipath_clean_part_key(struct ipath_portdata *pd,
+ struct ipath_devdata *dd)
+{
+ int i, j, pchanged = 0;
+ u64 oldpkey;
+
+ /* for debugging only */
+ oldpkey = (u64) dd->ipath_pkeys[0] |
+ ((u64) dd->ipath_pkeys[1] << 16) |
+ ((u64) dd->ipath_pkeys[2] << 32) |
+ ((u64) dd->ipath_pkeys[3] << 48);
+
+ for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
+ if (!pd->port_pkeys[i])
+ continue;
+ ipath_cdbg(VERBOSE, "look for key[%d] %hx in pkeys\n", i,
+ pd->port_pkeys[i]);
+ for (j = 0; j < ARRAY_SIZE(dd->ipath_pkeys); j++) {
+ /* check for match independent of the global bit */
+ if ((dd->ipath_pkeys[j] & 0x7fff) !=
+ (pd->port_pkeys[i] & 0x7fff))
+ continue;
+ if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
+ ipath_cdbg(VERBOSE, "p%u clear key "
+ "%x matches #%d\n",
+ pd->port_port,
+ pd->port_pkeys[i], j);
+ ipath_stats.sps_pkeys[j] =
+ dd->ipath_pkeys[j] = 0;
+ pchanged++;
+ }
+ else ipath_cdbg(
+ VERBOSE, "p%u key %x matches #%d, "
+ "but ref still %d\n", pd->port_port,
+ pd->port_pkeys[i], j,
+ atomic_read(&dd->ipath_pkeyrefs[j]));
+ break;
+ }
+ pd->port_pkeys[i] = 0;
+ }
+ if (pchanged) {
+ u64 pkey = (u64) dd->ipath_pkeys[0] |
+ ((u64) dd->ipath_pkeys[1] << 16) |
+ ((u64) dd->ipath_pkeys[2] << 32) |
+ ((u64) dd->ipath_pkeys[3] << 48);
+ ipath_cdbg(VERBOSE, "p%u old pkey reg %llx, "
+ "new pkey reg %llx\n", pd->port_port,
+ (unsigned long long) oldpkey,
+ (unsigned long long) pkey);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
+ pkey);
+ }
+}
+
+/*
+ * Initialize the port data with the receive buffer sizes
+ * so this can be done while the master port is locked.
+ * Otherwise, there is a race with a slave opening the port
+ * and seeing these fields uninitialized.
+ */
+static void init_user_egr_sizes(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned egrperchunk, egrcnt, size;
+
+ /*
+ * to avoid wasting a lot of memory, we allocate 32KB chunks of
+ * physically contiguous memory, advance through it until used up
+ * and then allocate more. Of course, we need memory to store those
+ * extra pointers, now. Started out with 256KB, but under heavy
+ * memory pressure (creating large files and then copying them over
+ * NFS while doing lots of MPI jobs), we hit some allocation
+ * failures, even though we can sleep... (2.6.10) Still get
+ * failures at 64K. 32K is the lowest we can go without wasting
+ * additional memory.
+ */
+ size = 0x8000;
+ egrperchunk = size / dd->ipath_rcvegrbufsize;
+ egrcnt = dd->ipath_rcvegrcnt;
+ pd->port_rcvegrbuf_chunks = (egrcnt + egrperchunk - 1) / egrperchunk;
+ pd->port_rcvegrbufs_perchunk = egrperchunk;
+ pd->port_rcvegrbuf_size = size;
+}
+
+/**
+ * ipath_create_user_egr - allocate eager TID buffers
+ * @pd: the port to allocate TID buffers for
+ *
+ * This routine is now quite different for user and kernel, because
+ * the kernel uses skb's, for the accelerated network performance
+ * This is the user port version
+ *
+ * Allocate the eager TID buffers and program them into infinipath
+ * They are no longer completely contiguous, we do multiple allocation
+ * calls.
+ */
+static int ipath_create_user_egr(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
+ size_t size;
+ int ret;
+ gfp_t gfp_flags;
+
+ /*
+ * GFP_USER, but without GFP_FS, so buffer cache can be
+ * coalesced (we hope); otherwise, even at order 4,
+ * heavy filesystem activity makes these fail, and we can
+ * use compound pages.
+ */
+ gfp_flags = __GFP_WAIT | __GFP_IO | __GFP_COMP;
+
+ egrcnt = dd->ipath_rcvegrcnt;
+ /* TID number offset for this port */
+ egroff = (pd->port_port - 1) * egrcnt + dd->ipath_p0_rcvegrcnt;
+ egrsize = dd->ipath_rcvegrbufsize;
+ ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid "
+ "offset %x, egrsize %u\n", egrcnt, egroff, egrsize);
+
+ chunk = pd->port_rcvegrbuf_chunks;
+ egrperchunk = pd->port_rcvegrbufs_perchunk;
+ size = pd->port_rcvegrbuf_size;
+ pd->port_rcvegrbuf = kmalloc(chunk * sizeof(pd->port_rcvegrbuf[0]),
+ GFP_KERNEL);
+ if (!pd->port_rcvegrbuf) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ pd->port_rcvegrbuf_phys =
+ kmalloc(chunk * sizeof(pd->port_rcvegrbuf_phys[0]),
+ GFP_KERNEL);
+ if (!pd->port_rcvegrbuf_phys) {
+ ret = -ENOMEM;
+ goto bail_rcvegrbuf;
+ }
+ for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
+
+ pd->port_rcvegrbuf[e] = dma_alloc_coherent(
+ &dd->pcidev->dev, size, &pd->port_rcvegrbuf_phys[e],
+ gfp_flags);
+
+ if (!pd->port_rcvegrbuf[e]) {
+ ret = -ENOMEM;
+ goto bail_rcvegrbuf_phys;
+ }
+ }
+
+ pd->port_rcvegr_phys = pd->port_rcvegrbuf_phys[0];
+
+ for (e = chunk = 0; chunk < pd->port_rcvegrbuf_chunks; chunk++) {
+ dma_addr_t pa = pd->port_rcvegrbuf_phys[chunk];
+ unsigned i;
+
+ for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
+ dd->ipath_f_put_tid(dd, e + egroff +
+ (u64 __iomem *)
+ ((char __iomem *)
+ dd->ipath_kregbase +
+ dd->ipath_rcvegrbase),
+ RCVHQ_RCV_TYPE_EAGER, pa);
+ pa += egrsize;
+ }
+ cond_resched(); /* don't hog the cpu */
+ }
+
+ ret = 0;
+ goto bail;
+
+bail_rcvegrbuf_phys:
+ for (e = 0; e < pd->port_rcvegrbuf_chunks &&
+ pd->port_rcvegrbuf[e]; e++) {
+ dma_free_coherent(&dd->pcidev->dev, size,
+ pd->port_rcvegrbuf[e],
+ pd->port_rcvegrbuf_phys[e]);
+
+ }
+ kfree(pd->port_rcvegrbuf_phys);
+ pd->port_rcvegrbuf_phys = NULL;
+bail_rcvegrbuf:
+ kfree(pd->port_rcvegrbuf);
+ pd->port_rcvegrbuf = NULL;
+bail:
+ return ret;
+}
+
+
+/* common code for the mappings on dma_alloc_coherent mem */
+static int ipath_mmap_mem(struct vm_area_struct *vma,
+ struct ipath_portdata *pd, unsigned len, int write_ok,
+ void *kvaddr, char *what)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned long pfn;
+ int ret;
+
+ if ((vma->vm_end - vma->vm_start) > len) {
+ dev_info(&dd->pcidev->dev,
+ "FAIL on %s: len %lx > %x\n", what,
+ vma->vm_end - vma->vm_start, len);
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ if (!write_ok) {
+ if (vma->vm_flags & VM_WRITE) {
+ dev_info(&dd->pcidev->dev,
+ "%s must be mapped readonly\n", what);
+ ret = -EPERM;
+ goto bail;
+ }
+
+ /* don't allow them to later change with mprotect */
+ vma->vm_flags &= ~VM_MAYWRITE;
+ }
+
+ pfn = virt_to_phys(kvaddr) >> PAGE_SHIFT;
+ ret = remap_pfn_range(vma, vma->vm_start, pfn,
+ len, vma->vm_page_prot);
+ if (ret)
+ dev_info(&dd->pcidev->dev, "%s port%u mmap of %lx, %x "
+ "bytes r%c failed: %d\n", what, pd->port_port,
+ pfn, len, write_ok?'w':'o', ret);
+ else
+ ipath_cdbg(VERBOSE, "%s port%u mmaped %lx, %x bytes "
+ "r%c\n", what, pd->port_port, pfn, len,
+ write_ok?'w':'o');
+bail:
+ return ret;
+}
+
+static int mmap_ureg(struct vm_area_struct *vma, struct ipath_devdata *dd,
+ u64 ureg)
+{
+ unsigned long phys;
+ int ret;
+
+ /*
+ * This is real hardware, so use io_remap. This is the mechanism
+ * for the user process to update the head registers for their port
+ * in the chip.
+ */
+ if ((vma->vm_end - vma->vm_start) > PAGE_SIZE) {
+ dev_info(&dd->pcidev->dev, "FAIL mmap userreg: reqlen "
+ "%lx > PAGE\n", vma->vm_end - vma->vm_start);
+ ret = -EFAULT;
+ } else {
+ phys = dd->ipath_physaddr + ureg;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
+ ret = io_remap_pfn_range(vma, vma->vm_start,
+ phys >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+ }
+ return ret;
+}
+
+static int mmap_piobufs(struct vm_area_struct *vma,
+ struct ipath_devdata *dd,
+ struct ipath_portdata *pd,
+ unsigned piobufs, unsigned piocnt)
+{
+ unsigned long phys;
+ int ret;
+
+ /*
+ * When we map the PIO buffers in the chip, we want to map them as
+ * writeonly, no read possible. This prevents access to previous
+ * process data, and catches users who might try to read the i/o
+ * space due to a bug.
+ */
+ if ((vma->vm_end - vma->vm_start) > (piocnt * dd->ipath_palign)) {
+ dev_info(&dd->pcidev->dev, "FAIL mmap piobufs: "
+ "reqlen %lx > PAGE\n",
+ vma->vm_end - vma->vm_start);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ phys = dd->ipath_physaddr + piobufs;
+
+#if defined(__powerpc__)
+ /* There isn't a generic way to specify writethrough mappings */
+ pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
+ pgprot_val(vma->vm_page_prot) |= _PAGE_WRITETHRU;
+ pgprot_val(vma->vm_page_prot) &= ~_PAGE_GUARDED;
+#endif
+
+ /*
+ * don't allow them to later change to readable with mprotect (for when
+ * not initially mapped readable, as is normally the case)
+ */
+ vma->vm_flags &= ~VM_MAYREAD;
+ vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
+
+ ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+bail:
+ return ret;
+}
+
+static int mmap_rcvegrbufs(struct vm_area_struct *vma,
+ struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ unsigned long start, size;
+ size_t total_size, i;
+ unsigned long pfn;
+ int ret;
+
+ size = pd->port_rcvegrbuf_size;
+ total_size = pd->port_rcvegrbuf_chunks * size;
+ if ((vma->vm_end - vma->vm_start) > total_size) {
+ dev_info(&dd->pcidev->dev, "FAIL on egr bufs: "
+ "reqlen %lx > actual %lx\n",
+ vma->vm_end - vma->vm_start,
+ (unsigned long) total_size);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (vma->vm_flags & VM_WRITE) {
+ dev_info(&dd->pcidev->dev, "Can't map eager buffers as "
+ "writable (flags=%lx)\n", vma->vm_flags);
+ ret = -EPERM;
+ goto bail;
+ }
+ /* don't allow them to later change to writeable with mprotect */
+ vma->vm_flags &= ~VM_MAYWRITE;
+
+ start = vma->vm_start;
+
+ for (i = 0; i < pd->port_rcvegrbuf_chunks; i++, start += size) {
+ pfn = virt_to_phys(pd->port_rcvegrbuf[i]) >> PAGE_SHIFT;
+ ret = remap_pfn_range(vma, start, pfn, size,
+ vma->vm_page_prot);
+ if (ret < 0)
+ goto bail;
+ }
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/*
+ * ipath_file_vma_fault - handle a VMA page fault.
+ */
+static int ipath_file_vma_fault(struct vm_area_struct *vma,
+ struct vm_fault *vmf)
+{
+ struct page *page;
+
+ page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT));
+ if (!page)
+ return VM_FAULT_SIGBUS;
+ get_page(page);
+ vmf->page = page;
+
+ return 0;
+}
+
+static const struct vm_operations_struct ipath_file_vm_ops = {
+ .fault = ipath_file_vma_fault,
+};
+
+static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr,
+ struct ipath_portdata *pd, unsigned subport)
+{
+ unsigned long len;
+ struct ipath_devdata *dd;
+ void *addr;
+ size_t size;
+ int ret = 0;
+
+ /* If the port is not shared, all addresses should be physical */
+ if (!pd->port_subport_cnt)
+ goto bail;
+
+ dd = pd->port_dd;
+ size = pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size;
+
+ /*
+ * Each process has all the subport uregbase, rcvhdrq, and
+ * rcvegrbufs mmapped - as an array for all the processes,
+ * and also separately for this process.
+ */
+ if (pgaddr == cvt_kvaddr(pd->subport_uregbase)) {
+ addr = pd->subport_uregbase;
+ size = PAGE_SIZE * pd->port_subport_cnt;
+ } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base)) {
+ addr = pd->subport_rcvhdr_base;
+ size = pd->port_rcvhdrq_size * pd->port_subport_cnt;
+ } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf)) {
+ addr = pd->subport_rcvegrbuf;
+ size *= pd->port_subport_cnt;
+ } else if (pgaddr == cvt_kvaddr(pd->subport_uregbase +
+ PAGE_SIZE * subport)) {
+ addr = pd->subport_uregbase + PAGE_SIZE * subport;
+ size = PAGE_SIZE;
+ } else if (pgaddr == cvt_kvaddr(pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * subport)) {
+ addr = pd->subport_rcvhdr_base +
+ pd->port_rcvhdrq_size * subport;
+ size = pd->port_rcvhdrq_size;
+ } else if (pgaddr == cvt_kvaddr(pd->subport_rcvegrbuf +
+ size * subport)) {
+ addr = pd->subport_rcvegrbuf + size * subport;
+ /* rcvegrbufs are read-only on the slave */
+ if (vma->vm_flags & VM_WRITE) {
+ dev_info(&dd->pcidev->dev,
+ "Can't map eager buffers as "
+ "writable (flags=%lx)\n", vma->vm_flags);
+ ret = -EPERM;
+ goto bail;
+ }
+ /*
+ * Don't allow permission to later change to writeable
+ * with mprotect.
+ */
+ vma->vm_flags &= ~VM_MAYWRITE;
+ } else {
+ goto bail;
+ }
+ len = vma->vm_end - vma->vm_start;
+ if (len > size) {
+ ipath_cdbg(MM, "FAIL: reqlen %lx > %zx\n", len, size);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ vma->vm_pgoff = (unsigned long) addr >> PAGE_SHIFT;
+ vma->vm_ops = &ipath_file_vm_ops;
+ vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_mmap - mmap various structures into user space
+ * @fp: the file pointer
+ * @vma: the VM area
+ *
+ * We use this to have a shared buffer between the kernel and the user code
+ * for the rcvhdr queue, egr buffers, and the per-port user regs and pio
+ * buffers in the chip. We have the open and close entries so we can bump
+ * the ref count and keep the driver from being unloaded while still mapped.
+ */
+static int ipath_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+ struct ipath_portdata *pd;
+ struct ipath_devdata *dd;
+ u64 pgaddr, ureg;
+ unsigned piobufs, piocnt;
+ int ret;
+
+ pd = port_fp(fp);
+ if (!pd) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ dd = pd->port_dd;
+
+ /*
+ * This is the ipath_do_user_init() code, mapping the shared buffers
+ * into the user process. The address referred to by vm_pgoff is the
+ * file offset passed via mmap(). For shared ports, this is the
+ * kernel vmalloc() address of the pages to share with the master.
+ * For non-shared or master ports, this is a physical address.
+ * We only do one mmap for each space mapped.
+ */
+ pgaddr = vma->vm_pgoff << PAGE_SHIFT;
+
+ /*
+ * Check for 0 in case one of the allocations failed, but user
+ * called mmap anyway.
+ */
+ if (!pgaddr) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ ipath_cdbg(MM, "pgaddr %llx vm_start=%lx len %lx port %u:%u:%u\n",
+ (unsigned long long) pgaddr, vma->vm_start,
+ vma->vm_end - vma->vm_start, dd->ipath_unit,
+ pd->port_port, subport_fp(fp));
+
+ /*
+ * Physical addresses must fit in 40 bits for our hardware.
+ * Check for kernel virtual addresses first, anything else must
+ * match a HW or memory address.
+ */
+ ret = mmap_kvaddr(vma, pgaddr, pd, subport_fp(fp));
+ if (ret) {
+ if (ret > 0)
+ ret = 0;
+ goto bail;
+ }
+
+ ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port;
+ if (!pd->port_subport_cnt) {
+ /* port is not shared */
+ piocnt = pd->port_piocnt;
+ piobufs = pd->port_piobufs;
+ } else if (!subport_fp(fp)) {
+ /* caller is the master */
+ piocnt = (pd->port_piocnt / pd->port_subport_cnt) +
+ (pd->port_piocnt % pd->port_subport_cnt);
+ piobufs = pd->port_piobufs +
+ dd->ipath_palign * (pd->port_piocnt - piocnt);
+ } else {
+ unsigned slave = subport_fp(fp) - 1;
+
+ /* caller is a slave */
+ piocnt = pd->port_piocnt / pd->port_subport_cnt;
+ piobufs = pd->port_piobufs + dd->ipath_palign * piocnt * slave;
+ }
+
+ if (pgaddr == ureg)
+ ret = mmap_ureg(vma, dd, ureg);
+ else if (pgaddr == piobufs)
+ ret = mmap_piobufs(vma, dd, pd, piobufs, piocnt);
+ else if (pgaddr == dd->ipath_pioavailregs_phys)
+ /* in-memory copy of pioavail registers */
+ ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
+ (void *) dd->ipath_pioavailregs_dma,
+ "pioavail registers");
+ else if (pgaddr == pd->port_rcvegr_phys)
+ ret = mmap_rcvegrbufs(vma, pd);
+ else if (pgaddr == (u64) pd->port_rcvhdrq_phys)
+ /*
+ * The rcvhdrq itself; readonly except on HT (so have
+ * to allow writable mapping), multiple pages, contiguous
+ * from an i/o perspective.
+ */
+ ret = ipath_mmap_mem(vma, pd, pd->port_rcvhdrq_size, 1,
+ pd->port_rcvhdrq,
+ "rcvhdrq");
+ else if (pgaddr == (u64) pd->port_rcvhdrqtailaddr_phys)
+ /* in-memory copy of rcvhdrq tail register */
+ ret = ipath_mmap_mem(vma, pd, PAGE_SIZE, 0,
+ pd->port_rcvhdrtail_kvaddr,
+ "rcvhdrq tail");
+ else
+ ret = -EINVAL;
+
+ vma->vm_private_data = NULL;
+
+ if (ret < 0)
+ dev_info(&dd->pcidev->dev,
+ "Failure %d on off %llx len %lx\n",
+ -ret, (unsigned long long)pgaddr,
+ vma->vm_end - vma->vm_start);
+bail:
+ return ret;
+}
+
+static unsigned ipath_poll_hdrqfull(struct ipath_portdata *pd)
+{
+ unsigned pollflag = 0;
+
+ if ((pd->poll_type & IPATH_POLL_TYPE_OVERFLOW) &&
+ pd->port_hdrqfull != pd->port_hdrqfull_poll) {
+ pollflag |= POLLIN | POLLRDNORM;
+ pd->port_hdrqfull_poll = pd->port_hdrqfull;
+ }
+
+ return pollflag;
+}
+
+static unsigned int ipath_poll_urgent(struct ipath_portdata *pd,
+ struct file *fp,
+ struct poll_table_struct *pt)
+{
+ unsigned pollflag = 0;
+ struct ipath_devdata *dd;
+
+ dd = pd->port_dd;
+
+ /* variable access in ipath_poll_hdrqfull() needs this */
+ rmb();
+ pollflag = ipath_poll_hdrqfull(pd);
+
+ if (pd->port_urgent != pd->port_urgent_poll) {
+ pollflag |= POLLIN | POLLRDNORM;
+ pd->port_urgent_poll = pd->port_urgent;
+ }
+
+ if (!pollflag) {
+ /* this saves a spin_lock/unlock in interrupt handler... */
+ set_bit(IPATH_PORT_WAITING_URG, &pd->port_flag);
+ /* flush waiting flag so don't miss an event... */
+ wmb();
+ poll_wait(fp, &pd->port_wait, pt);
+ }
+
+ return pollflag;
+}
+
+static unsigned int ipath_poll_next(struct ipath_portdata *pd,
+ struct file *fp,
+ struct poll_table_struct *pt)
+{
+ u32 head;
+ u32 tail;
+ unsigned pollflag = 0;
+ struct ipath_devdata *dd;
+
+ dd = pd->port_dd;
+
+ /* variable access in ipath_poll_hdrqfull() needs this */
+ rmb();
+ pollflag = ipath_poll_hdrqfull(pd);
+
+ head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
+ if (pd->port_rcvhdrtail_kvaddr)
+ tail = ipath_get_rcvhdrtail(pd);
+ else
+ tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
+
+ if (head != tail)
+ pollflag |= POLLIN | POLLRDNORM;
+ else {
+ /* this saves a spin_lock/unlock in interrupt handler */
+ set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+ /* flush waiting flag so we don't miss an event */
+ wmb();
+
+ set_bit(pd->port_port + dd->ipath_r_intravail_shift,
+ &dd->ipath_rcvctrl);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ if (dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+ ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off | head,
+ pd->port_port);
+
+ poll_wait(fp, &pd->port_wait, pt);
+ }
+
+ return pollflag;
+}
+
+static unsigned int ipath_poll(struct file *fp,
+ struct poll_table_struct *pt)
+{
+ struct ipath_portdata *pd;
+ unsigned pollflag;
+
+ pd = port_fp(fp);
+ if (!pd)
+ pollflag = 0;
+ else if (pd->poll_type & IPATH_POLL_TYPE_URGENT)
+ pollflag = ipath_poll_urgent(pd, fp, pt);
+ else
+ pollflag = ipath_poll_next(pd, fp, pt);
+
+ return pollflag;
+}
+
+static int ipath_supports_subports(int user_swmajor, int user_swminor)
+{
+ /* no subport implementation prior to software version 1.3 */
+ return (user_swmajor > 1) || (user_swminor >= 3);
+}
+
+static int ipath_compatible_subports(int user_swmajor, int user_swminor)
+{
+ /* this code is written long-hand for clarity */
+ if (IPATH_USER_SWMAJOR != user_swmajor) {
+ /* no promise of compatibility if major mismatch */
+ return 0;
+ }
+ if (IPATH_USER_SWMAJOR == 1) {
+ switch (IPATH_USER_SWMINOR) {
+ case 0:
+ case 1:
+ case 2:
+ /* no subport implementation so cannot be compatible */
+ return 0;
+ case 3:
+ /* 3 is only compatible with itself */
+ return user_swminor == 3;
+ default:
+ /* >= 4 are compatible (or are expected to be) */
+ return user_swminor >= 4;
+ }
+ }
+ /* make no promises yet for future major versions */
+ return 0;
+}
+
+static int init_subports(struct ipath_devdata *dd,
+ struct ipath_portdata *pd,
+ const struct ipath_user_info *uinfo)
+{
+ int ret = 0;
+ unsigned num_subports;
+ size_t size;
+
+ /*
+ * If the user is requesting zero subports,
+ * skip the subport allocation.
+ */
+ if (uinfo->spu_subport_cnt <= 0)
+ goto bail;
+
+ /* Self-consistency check for ipath_compatible_subports() */
+ if (ipath_supports_subports(IPATH_USER_SWMAJOR, IPATH_USER_SWMINOR) &&
+ !ipath_compatible_subports(IPATH_USER_SWMAJOR,
+ IPATH_USER_SWMINOR)) {
+ dev_info(&dd->pcidev->dev,
+ "Inconsistent ipath_compatible_subports()\n");
+ goto bail;
+ }
+
+ /* Check for subport compatibility */
+ if (!ipath_compatible_subports(uinfo->spu_userversion >> 16,
+ uinfo->spu_userversion & 0xffff)) {
+ dev_info(&dd->pcidev->dev,
+ "Mismatched user version (%d.%d) and driver "
+ "version (%d.%d) while port sharing. Ensure "
+ "that driver and library are from the same "
+ "release.\n",
+ (int) (uinfo->spu_userversion >> 16),
+ (int) (uinfo->spu_userversion & 0xffff),
+ IPATH_USER_SWMAJOR,
+ IPATH_USER_SWMINOR);
+ goto bail;
+ }
+ if (uinfo->spu_subport_cnt > INFINIPATH_MAX_SUBPORT) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ num_subports = uinfo->spu_subport_cnt;
+ pd->subport_uregbase = vzalloc(PAGE_SIZE * num_subports);
+ if (!pd->subport_uregbase) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ /* Note: pd->port_rcvhdrq_size isn't initialized yet. */
+ size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
+ sizeof(u32), PAGE_SIZE) * num_subports;
+ pd->subport_rcvhdr_base = vzalloc(size);
+ if (!pd->subport_rcvhdr_base) {
+ ret = -ENOMEM;
+ goto bail_ureg;
+ }
+
+ pd->subport_rcvegrbuf = vzalloc(pd->port_rcvegrbuf_chunks *
+ pd->port_rcvegrbuf_size *
+ num_subports);
+ if (!pd->subport_rcvegrbuf) {
+ ret = -ENOMEM;
+ goto bail_rhdr;
+ }
+
+ pd->port_subport_cnt = uinfo->spu_subport_cnt;
+ pd->port_subport_id = uinfo->spu_subport_id;
+ pd->active_slaves = 1;
+ set_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
+ goto bail;
+
+bail_rhdr:
+ vfree(pd->subport_rcvhdr_base);
+bail_ureg:
+ vfree(pd->subport_uregbase);
+ pd->subport_uregbase = NULL;
+bail:
+ return ret;
+}
+
+static int try_alloc_port(struct ipath_devdata *dd, int port,
+ struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ struct ipath_portdata *pd;
+ int ret;
+
+ if (!(pd = dd->ipath_pd[port])) {
+ void *ptmp;
+
+ pd = kzalloc(sizeof(struct ipath_portdata), GFP_KERNEL);
+
+ /*
+ * Allocate memory for use in ipath_tid_update() just once
+ * at open, not per call. Reduces cost of expected send
+ * setup.
+ */
+ ptmp = kmalloc(dd->ipath_rcvtidcnt * sizeof(u16) +
+ dd->ipath_rcvtidcnt * sizeof(struct page **),
+ GFP_KERNEL);
+ if (!pd || !ptmp) {
+ ipath_dev_err(dd, "Unable to allocate portdata "
+ "memory, failing open\n");
+ ret = -ENOMEM;
+ kfree(pd);
+ kfree(ptmp);
+ goto bail;
+ }
+ dd->ipath_pd[port] = pd;
+ dd->ipath_pd[port]->port_port = port;
+ dd->ipath_pd[port]->port_dd = dd;
+ dd->ipath_pd[port]->port_tid_pg_list = ptmp;
+ init_waitqueue_head(&dd->ipath_pd[port]->port_wait);
+ }
+ if (!pd->port_cnt) {
+ pd->userversion = uinfo->spu_userversion;
+ init_user_egr_sizes(pd);
+ if ((ret = init_subports(dd, pd, uinfo)) != 0)
+ goto bail;
+ ipath_cdbg(PROC, "%s[%u] opened unit:port %u:%u\n",
+ current->comm, current->pid, dd->ipath_unit,
+ port);
+ pd->port_cnt = 1;
+ port_fp(fp) = pd;
+ pd->port_pid = get_pid(task_pid(current));
+ strlcpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
+ ipath_stats.sps_ports++;
+ ret = 0;
+ } else
+ ret = -EBUSY;
+
+bail:
+ return ret;
+}
+
+static inline int usable(struct ipath_devdata *dd)
+{
+ return dd &&
+ (dd->ipath_flags & IPATH_PRESENT) &&
+ dd->ipath_kregbase &&
+ dd->ipath_lid &&
+ !(dd->ipath_flags & (IPATH_LINKDOWN | IPATH_DISABLED
+ | IPATH_LINKUNK));
+}
+
+static int find_free_port(int unit, struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ struct ipath_devdata *dd = ipath_lookup(unit);
+ int ret, i;
+
+ if (!dd) {
+ ret = -ENODEV;
+ goto bail;
+ }
+
+ if (!usable(dd)) {
+ ret = -ENETDOWN;
+ goto bail;
+ }
+
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ ret = try_alloc_port(dd, i, fp, uinfo);
+ if (ret != -EBUSY)
+ goto bail;
+ }
+ ret = -EBUSY;
+
+bail:
+ return ret;
+}
+
+static int find_best_unit(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int ret = 0, i, prefunit = -1, devmax;
+ int maxofallports, npresent, nup;
+ int ndev;
+
+ devmax = ipath_count_units(&npresent, &nup, &maxofallports);
+
+ /*
+ * This code is present to allow a knowledgeable person to
+ * specify the layout of processes to processors before opening
+ * this driver, and then we'll assign the process to the "closest"
+ * InfiniPath chip to that processor (we assume reasonable connectivity,
+ * for now). This code assumes that if affinity has been set
+ * before this point, that at most one cpu is set; for now this
+ * is reasonable. I check for both cpumask_empty() and cpumask_full(),
+ * in case some kernel variant sets none of the bits when no
+ * affinity is set. 2.6.11 and 12 kernels have all present
+ * cpus set. Some day we'll have to fix it up further to handle
+ * a cpu subset. This algorithm fails for two HT chips connected
+ * in tunnel fashion. Eventually this needs real topology
+ * information. There may be some issues with dual core numbering
+ * as well. This needs more work prior to release.
+ */
+ if (!cpumask_empty(tsk_cpus_allowed(current)) &&
+ !cpumask_full(tsk_cpus_allowed(current))) {
+ int ncpus = num_online_cpus(), curcpu = -1, nset = 0;
+ get_online_cpus();
+ for_each_online_cpu(i)
+ if (cpumask_test_cpu(i, tsk_cpus_allowed(current))) {
+ ipath_cdbg(PROC, "%s[%u] affinity set for "
+ "cpu %d/%d\n", current->comm,
+ current->pid, i, ncpus);
+ curcpu = i;
+ nset++;
+ }
+ put_online_cpus();
+ if (curcpu != -1 && nset != ncpus) {
+ if (npresent) {
+ prefunit = curcpu / (ncpus / npresent);
+ ipath_cdbg(PROC,"%s[%u] %d chips, %d cpus, "
+ "%d cpus/chip, select unit %d\n",
+ current->comm, current->pid,
+ npresent, ncpus, ncpus / npresent,
+ prefunit);
+ }
+ }
+ }
+
+ /*
+ * user ports start at 1, kernel port is 0
+ * For now, we do round-robin access across all chips
+ */
+
+ if (prefunit != -1)
+ devmax = prefunit + 1;
+recheck:
+ for (i = 1; i < maxofallports; i++) {
+ for (ndev = prefunit != -1 ? prefunit : 0; ndev < devmax;
+ ndev++) {
+ struct ipath_devdata *dd = ipath_lookup(ndev);
+
+ if (!usable(dd))
+ continue; /* can't use this unit */
+ if (i >= dd->ipath_cfgports)
+ /*
+ * Maxed out on users of this unit. Try
+ * next.
+ */
+ continue;
+ ret = try_alloc_port(dd, i, fp, uinfo);
+ if (!ret)
+ goto done;
+ }
+ }
+
+ if (npresent) {
+ if (nup == 0) {
+ ret = -ENETDOWN;
+ ipath_dbg("No ports available (none initialized "
+ "and ready)\n");
+ } else {
+ if (prefunit > 0) {
+ /* if started above 0, retry from 0 */
+ ipath_cdbg(PROC,
+ "%s[%u] no ports on prefunit "
+ "%d, clear and re-check\n",
+ current->comm, current->pid,
+ prefunit);
+ devmax = ipath_count_units(NULL, NULL,
+ NULL);
+ prefunit = -1;
+ goto recheck;
+ }
+ ret = -EBUSY;
+ ipath_dbg("No ports available\n");
+ }
+ } else {
+ ret = -ENXIO;
+ ipath_dbg("No boards found\n");
+ }
+
+done:
+ return ret;
+}
+
+static int find_shared_port(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int devmax, ndev, i;
+ int ret = 0;
+
+ devmax = ipath_count_units(NULL, NULL, NULL);
+
+ for (ndev = 0; ndev < devmax; ndev++) {
+ struct ipath_devdata *dd = ipath_lookup(ndev);
+
+ if (!usable(dd))
+ continue;
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ /* Skip ports which are not yet open */
+ if (!pd || !pd->port_cnt)
+ continue;
+ /* Skip port if it doesn't match the requested one */
+ if (pd->port_subport_id != uinfo->spu_subport_id)
+ continue;
+ /* Verify the sharing process matches the master */
+ if (pd->port_subport_cnt != uinfo->spu_subport_cnt ||
+ pd->userversion != uinfo->spu_userversion ||
+ pd->port_cnt >= pd->port_subport_cnt) {
+ ret = -EINVAL;
+ goto done;
+ }
+ port_fp(fp) = pd;
+ subport_fp(fp) = pd->port_cnt++;
+ pd->port_subpid[subport_fp(fp)] =
+ get_pid(task_pid(current));
+ tidcursor_fp(fp) = 0;
+ pd->active_slaves |= 1 << subport_fp(fp);
+ ipath_cdbg(PROC,
+ "%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
+ current->comm, current->pid,
+ subport_fp(fp),
+ pd->port_comm, pid_nr(pd->port_pid),
+ dd->ipath_unit, pd->port_port);
+ ret = 1;
+ goto done;
+ }
+ }
+
+done:
+ return ret;
+}
+
+static int ipath_open(struct inode *in, struct file *fp)
+{
+ /* The real work is performed later in ipath_assign_port() */
+ fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
+ return fp->private_data ? 0 : -ENOMEM;
+}
+
+/* Get port early, so can set affinity prior to memory allocation */
+static int ipath_assign_port(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int ret;
+ int i_minor;
+ unsigned swmajor, swminor;
+
+ /* Check to be sure we haven't already initialized this file */
+ if (port_fp(fp)) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* for now, if major version is different, bail */
+ swmajor = uinfo->spu_userversion >> 16;
+ if (swmajor != IPATH_USER_SWMAJOR) {
+ ipath_dbg("User major version %d not same as driver "
+ "major %d\n", uinfo->spu_userversion >> 16,
+ IPATH_USER_SWMAJOR);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ swminor = uinfo->spu_userversion & 0xffff;
+ if (swminor != IPATH_USER_SWMINOR)
+ ipath_dbg("User minor version %d not same as driver "
+ "minor %d\n", swminor, IPATH_USER_SWMINOR);
+
+ mutex_lock(&ipath_mutex);
+
+ if (ipath_compatible_subports(swmajor, swminor) &&
+ uinfo->spu_subport_cnt &&
+ (ret = find_shared_port(fp, uinfo))) {
+ if (ret > 0)
+ ret = 0;
+ goto done_chk_sdma;
+ }
+
+ i_minor = iminor(file_inode(fp)) - IPATH_USER_MINOR_BASE;
+ ipath_cdbg(VERBOSE, "open on dev %lx (minor %d)\n",
+ (long)file_inode(fp)->i_rdev, i_minor);
+
+ if (i_minor)
+ ret = find_free_port(i_minor - 1, fp, uinfo);
+ else
+ ret = find_best_unit(fp, uinfo);
+
+done_chk_sdma:
+ if (!ret) {
+ struct ipath_filedata *fd = fp->private_data;
+ const struct ipath_portdata *pd = fd->pd;
+ const struct ipath_devdata *dd = pd->port_dd;
+
+ fd->pq = ipath_user_sdma_queue_create(&dd->pcidev->dev,
+ dd->ipath_unit,
+ pd->port_port,
+ fd->subport);
+
+ if (!fd->pq)
+ ret = -ENOMEM;
+ }
+
+ mutex_unlock(&ipath_mutex);
+
+done:
+ return ret;
+}
+
+
+static int ipath_do_user_init(struct file *fp,
+ const struct ipath_user_info *uinfo)
+{
+ int ret;
+ struct ipath_portdata *pd = port_fp(fp);
+ struct ipath_devdata *dd;
+ u32 head32;
+
+ /* Subports don't need to initialize anything since master did it. */
+ if (subport_fp(fp)) {
+ ret = wait_event_interruptible(pd->port_wait,
+ !test_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag));
+ goto done;
+ }
+
+ dd = pd->port_dd;
+
+ if (uinfo->spu_rcvhdrsize) {
+ ret = ipath_setrcvhdrsize(dd, uinfo->spu_rcvhdrsize);
+ if (ret)
+ goto done;
+ }
+
+ /* for now we do nothing with rcvhdrcnt: uinfo->spu_rcvhdrcnt */
+
+ /* some ports may get extra buffers, calculate that here */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_piocnt = dd->ipath_pbufsport + 1;
+ else
+ pd->port_piocnt = dd->ipath_pbufsport;
+
+ /* for right now, kernel piobufs are at end, so port 1 is at 0 */
+ if (pd->port_port <= dd->ipath_ports_extrabuf)
+ pd->port_pio_base = (dd->ipath_pbufsport + 1)
+ * (pd->port_port - 1);
+ else
+ pd->port_pio_base = dd->ipath_ports_extrabuf +
+ dd->ipath_pbufsport * (pd->port_port - 1);
+ pd->port_piobufs = dd->ipath_piobufbase +
+ pd->port_pio_base * dd->ipath_palign;
+ ipath_cdbg(VERBOSE, "piobuf base for port %u is 0x%x, piocnt %u,"
+ " first pio %u\n", pd->port_port, pd->port_piobufs,
+ pd->port_piocnt, pd->port_pio_base);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base, pd->port_piocnt, 0);
+
+ /*
+ * Now allocate the rcvhdr Q and eager TIDs; skip the TID
+ * array for time being. If pd->port_port > chip-supported,
+ * we need to do extra stuff here to handle by handling overflow
+ * through port 0, someday
+ */
+ ret = ipath_create_rcvhdrq(dd, pd);
+ if (!ret)
+ ret = ipath_create_user_egr(pd);
+ if (ret)
+ goto done;
+
+ /*
+ * set the eager head register for this port to the current values
+ * of the tail pointers, since we don't know if they were
+ * updated on last use of the port.
+ */
+ head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port);
+ ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port);
+ pd->port_lastrcvhdrqtail = -1;
+ ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n",
+ pd->port_port, head32);
+ pd->port_tidcursor = 0; /* start at beginning after open */
+
+ /* initialize poll variables... */
+ pd->port_urgent = 0;
+ pd->port_urgent_poll = 0;
+ pd->port_hdrqfull_poll = pd->port_hdrqfull;
+
+ /*
+ * Now enable the port for receive.
+ * For chips that are set to DMA the tail register to memory
+ * when they change (and when the update bit transitions from
+ * 0 to 1. So for those chips, we turn it off and then back on.
+ * This will (very briefly) affect any other open ports, but the
+ * duration is very short, and therefore isn't an issue. We
+ * explicitly set the in-memory tail copy to 0 beforehand, so we
+ * don't have to wait to be sure the DMA update has happened
+ * (chip resets head/tail to 0 on transition to enable).
+ */
+ set_bit(dd->ipath_r_portenable_shift + pd->port_port,
+ &dd->ipath_rcvctrl);
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ if (pd->port_rcvhdrtail_kvaddr)
+ ipath_clear_rcvhdrtail(pd);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl &
+ ~(1ULL << dd->ipath_r_tailupd_shift));
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ /* Notify any waiting slaves */
+ if (pd->port_subport_cnt) {
+ clear_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag);
+ wake_up(&pd->port_wait);
+ }
+done:
+ return ret;
+}
+
+/**
+ * unlock_exptid - unlock any expected TID entries port still had in use
+ * @pd: port
+ *
+ * We don't actually update the chip here, because we do a bulk update
+ * below, using ipath_f_clear_tids.
+ */
+static void unlock_expected_tids(struct ipath_portdata *pd)
+{
+ struct ipath_devdata *dd = pd->port_dd;
+ int port_tidbase = pd->port_port * dd->ipath_rcvtidcnt;
+ int i, cnt = 0, maxtid = port_tidbase + dd->ipath_rcvtidcnt;
+
+ ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
+ pd->port_port);
+ for (i = port_tidbase; i < maxtid; i++) {
+ struct page *ps = dd->ipath_pageshadow[i];
+
+ if (!ps)
+ continue;
+
+ dd->ipath_pageshadow[i] = NULL;
+ pci_unmap_page(dd->pcidev, dd->ipath_physshadow[i],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ipath_release_user_pages_on_close(&ps, 1);
+ cnt++;
+ ipath_stats.sps_pageunlocks++;
+ }
+ if (cnt)
+ ipath_cdbg(VERBOSE, "Port %u locked %u expTID entries\n",
+ pd->port_port, cnt);
+
+ if (ipath_stats.sps_pagelocks || ipath_stats.sps_pageunlocks)
+ ipath_cdbg(VERBOSE, "%llu pages locked, %llu unlocked\n",
+ (unsigned long long) ipath_stats.sps_pagelocks,
+ (unsigned long long)
+ ipath_stats.sps_pageunlocks);
+}
+
+static int ipath_close(struct inode *in, struct file *fp)
+{
+ int ret = 0;
+ struct ipath_filedata *fd;
+ struct ipath_portdata *pd;
+ struct ipath_devdata *dd;
+ unsigned long flags;
+ unsigned port;
+ struct pid *pid;
+
+ ipath_cdbg(VERBOSE, "close on dev %lx, private data %p\n",
+ (long)in->i_rdev, fp->private_data);
+
+ mutex_lock(&ipath_mutex);
+
+ fd = fp->private_data;
+ fp->private_data = NULL;
+ pd = fd->pd;
+ if (!pd) {
+ mutex_unlock(&ipath_mutex);
+ goto bail;
+ }
+
+ dd = pd->port_dd;
+
+ /* drain user sdma queue */
+ ipath_user_sdma_queue_drain(dd, fd->pq);
+ ipath_user_sdma_queue_destroy(fd->pq);
+
+ if (--pd->port_cnt) {
+ /*
+ * XXX If the master closes the port before the slave(s),
+ * revoke the mmap for the eager receive queue so
+ * the slave(s) don't wait for receive data forever.
+ */
+ pd->active_slaves &= ~(1 << fd->subport);
+ put_pid(pd->port_subpid[fd->subport]);
+ pd->port_subpid[fd->subport] = NULL;
+ mutex_unlock(&ipath_mutex);
+ goto bail;
+ }
+ /* early; no interrupt users after this */
+ spin_lock_irqsave(&dd->ipath_uctxt_lock, flags);
+ port = pd->port_port;
+ dd->ipath_pd[port] = NULL;
+ pid = pd->port_pid;
+ pd->port_pid = NULL;
+ spin_unlock_irqrestore(&dd->ipath_uctxt_lock, flags);
+
+ if (pd->port_rcvwait_to || pd->port_piowait_to
+ || pd->port_rcvnowait || pd->port_pionowait) {
+ ipath_cdbg(VERBOSE, "port%u, %u rcv, %u pio wait timeo; "
+ "%u rcv %u, pio already\n",
+ pd->port_port, pd->port_rcvwait_to,
+ pd->port_piowait_to, pd->port_rcvnowait,
+ pd->port_pionowait);
+ pd->port_rcvwait_to = pd->port_piowait_to =
+ pd->port_rcvnowait = pd->port_pionowait = 0;
+ }
+ if (pd->port_flag) {
+ ipath_cdbg(PROC, "port %u port_flag set: 0x%lx\n",
+ pd->port_port, pd->port_flag);
+ pd->port_flag = 0;
+ }
+
+ if (dd->ipath_kregbase) {
+ /* atomically clear receive enable port and intr avail. */
+ clear_bit(dd->ipath_r_portenable_shift + port,
+ &dd->ipath_rcvctrl);
+ clear_bit(pd->port_port + dd->ipath_r_intravail_shift,
+ &dd->ipath_rcvctrl);
+ ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ /* and read back from chip to be sure that nothing
+ * else is in flight when we do the rest */
+ (void)ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+
+ /* clean up the pkeys for this port user */
+ ipath_clean_part_key(pd, dd);
+ /*
+ * be paranoid, and never write 0's to these, just use an
+ * unused part of the port 0 tail page. Of course,
+ * rcvhdraddr points to a large chunk of memory, so this
+ * could still trash things, but at least it won't trash
+ * page 0, and by disabling the port, it should stop "soon",
+ * even if a packet or two is in already in flight after we
+ * disabled the port.
+ */
+ ipath_write_kreg_port(dd,
+ dd->ipath_kregs->kr_rcvhdrtailaddr, port,
+ dd->ipath_dummy_hdrq_phys);
+ ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
+ pd->port_port, dd->ipath_dummy_hdrq_phys);
+
+ ipath_disarm_piobufs(dd, pd->port_pio_base, pd->port_piocnt);
+ ipath_chg_pioavailkernel(dd, pd->port_pio_base,
+ pd->port_piocnt, 1);
+
+ dd->ipath_f_clear_tids(dd, pd->port_port);
+
+ if (dd->ipath_pageshadow)
+ unlock_expected_tids(pd);
+ ipath_stats.sps_ports--;
+ ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
+ pd->port_comm, pid_nr(pid),
+ dd->ipath_unit, port);
+ }
+
+ put_pid(pid);
+ mutex_unlock(&ipath_mutex);
+ ipath_free_pddata(dd, pd); /* after releasing the mutex */
+
+bail:
+ kfree(fd);
+ return ret;
+}
+
+static int ipath_port_info(struct ipath_portdata *pd, u16 subport,
+ struct ipath_port_info __user *uinfo)
+{
+ struct ipath_port_info info;
+ int nup;
+ int ret;
+ size_t sz;
+
+ (void) ipath_count_units(NULL, &nup, NULL);
+ info.num_active = nup;
+ info.unit = pd->port_dd->ipath_unit;
+ info.port = pd->port_port;
+ info.subport = subport;
+ /* Don't return new fields if old library opened the port. */
+ if (ipath_supports_subports(pd->userversion >> 16,
+ pd->userversion & 0xffff)) {
+ /* Number of user ports available for this device. */
+ info.num_ports = pd->port_dd->ipath_cfgports - 1;
+ info.num_subports = pd->port_subport_cnt;
+ sz = sizeof(info);
+ } else
+ sz = sizeof(info) - 2 * sizeof(u16);
+
+ if (copy_to_user(uinfo, &info, sz)) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+static int ipath_get_slave_info(struct ipath_portdata *pd,
+ void __user *slave_mask_addr)
+{
+ int ret = 0;
+
+ if (copy_to_user(slave_mask_addr, &pd->active_slaves, sizeof(u32)))
+ ret = -EFAULT;
+ return ret;
+}
+
+static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue *pq,
+ u32 __user *inflightp)
+{
+ const u32 val = ipath_user_sdma_inflight_counter(pq);
+
+ if (put_user(val, inflightp))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ipath_sdma_get_complete(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ u32 __user *completep)
+{
+ u32 val;
+ int err;
+
+ err = ipath_user_sdma_make_progress(dd, pq);
+ if (err < 0)
+ return err;
+
+ val = ipath_user_sdma_complete_counter(pq);
+ if (put_user(val, completep))
+ return -EFAULT;
+
+ return 0;
+}
+
+static ssize_t ipath_write(struct file *fp, const char __user *data,
+ size_t count, loff_t *off)
+{
+ const struct ipath_cmd __user *ucmd;
+ struct ipath_portdata *pd;
+ const void __user *src;
+ size_t consumed, copy;
+ struct ipath_cmd cmd;
+ ssize_t ret = 0;
+ void *dest;
+
+ if (count < sizeof(cmd.type)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ ucmd = (const struct ipath_cmd __user *) data;
+
+ if (copy_from_user(&cmd.type, &ucmd->type, sizeof(cmd.type))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ consumed = sizeof(cmd.type);
+
+ switch (cmd.type) {
+ case IPATH_CMD_ASSIGN_PORT:
+ case __IPATH_CMD_USER_INIT:
+ case IPATH_CMD_USER_INIT:
+ copy = sizeof(cmd.cmd.user_info);
+ dest = &cmd.cmd.user_info;
+ src = &ucmd->cmd.user_info;
+ break;
+ case IPATH_CMD_RECV_CTRL:
+ copy = sizeof(cmd.cmd.recv_ctrl);
+ dest = &cmd.cmd.recv_ctrl;
+ src = &ucmd->cmd.recv_ctrl;
+ break;
+ case IPATH_CMD_PORT_INFO:
+ copy = sizeof(cmd.cmd.port_info);
+ dest = &cmd.cmd.port_info;
+ src = &ucmd->cmd.port_info;
+ break;
+ case IPATH_CMD_TID_UPDATE:
+ case IPATH_CMD_TID_FREE:
+ copy = sizeof(cmd.cmd.tid_info);
+ dest = &cmd.cmd.tid_info;
+ src = &ucmd->cmd.tid_info;
+ break;
+ case IPATH_CMD_SET_PART_KEY:
+ copy = sizeof(cmd.cmd.part_key);
+ dest = &cmd.cmd.part_key;
+ src = &ucmd->cmd.part_key;
+ break;
+ case __IPATH_CMD_SLAVE_INFO:
+ copy = sizeof(cmd.cmd.slave_mask_addr);
+ dest = &cmd.cmd.slave_mask_addr;
+ src = &ucmd->cmd.slave_mask_addr;
+ break;
+ case IPATH_CMD_PIOAVAILUPD: // force an update of PIOAvail reg
+ copy = 0;
+ src = NULL;
+ dest = NULL;
+ break;
+ case IPATH_CMD_POLL_TYPE:
+ copy = sizeof(cmd.cmd.poll_type);
+ dest = &cmd.cmd.poll_type;
+ src = &ucmd->cmd.poll_type;
+ break;
+ case IPATH_CMD_ARMLAUNCH_CTRL:
+ copy = sizeof(cmd.cmd.armlaunch_ctrl);
+ dest = &cmd.cmd.armlaunch_ctrl;
+ src = &ucmd->cmd.armlaunch_ctrl;
+ break;
+ case IPATH_CMD_SDMA_INFLIGHT:
+ copy = sizeof(cmd.cmd.sdma_inflight);
+ dest = &cmd.cmd.sdma_inflight;
+ src = &ucmd->cmd.sdma_inflight;
+ break;
+ case IPATH_CMD_SDMA_COMPLETE:
+ copy = sizeof(cmd.cmd.sdma_complete);
+ dest = &cmd.cmd.sdma_complete;
+ src = &ucmd->cmd.sdma_complete;
+ break;
+ default:
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (copy) {
+ if ((count - consumed) < copy) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (copy_from_user(dest, src, copy)) {
+ ret = -EFAULT;
+ goto bail;
+ }
+
+ consumed += copy;
+ }
+
+ pd = port_fp(fp);
+ if (!pd && cmd.type != __IPATH_CMD_USER_INIT &&
+ cmd.type != IPATH_CMD_ASSIGN_PORT) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ switch (cmd.type) {
+ case IPATH_CMD_ASSIGN_PORT:
+ ret = ipath_assign_port(fp, &cmd.cmd.user_info);
+ if (ret)
+ goto bail;
+ break;
+ case __IPATH_CMD_USER_INIT:
+ /* backwards compatibility, get port first */
+ ret = ipath_assign_port(fp, &cmd.cmd.user_info);
+ if (ret)
+ goto bail;
+ /* and fall through to current version. */
+ case IPATH_CMD_USER_INIT:
+ ret = ipath_do_user_init(fp, &cmd.cmd.user_info);
+ if (ret)
+ goto bail;
+ ret = ipath_get_base_info(
+ fp, (void __user *) (unsigned long)
+ cmd.cmd.user_info.spu_base_info,
+ cmd.cmd.user_info.spu_base_info_size);
+ break;
+ case IPATH_CMD_RECV_CTRL:
+ ret = ipath_manage_rcvq(pd, subport_fp(fp), cmd.cmd.recv_ctrl);
+ break;
+ case IPATH_CMD_PORT_INFO:
+ ret = ipath_port_info(pd, subport_fp(fp),
+ (struct ipath_port_info __user *)
+ (unsigned long) cmd.cmd.port_info);
+ break;
+ case IPATH_CMD_TID_UPDATE:
+ ret = ipath_tid_update(pd, fp, &cmd.cmd.tid_info);
+ break;
+ case IPATH_CMD_TID_FREE:
+ ret = ipath_tid_free(pd, subport_fp(fp), &cmd.cmd.tid_info);
+ break;
+ case IPATH_CMD_SET_PART_KEY:
+ ret = ipath_set_part_key(pd, cmd.cmd.part_key);
+ break;
+ case __IPATH_CMD_SLAVE_INFO:
+ ret = ipath_get_slave_info(pd,
+ (void __user *) (unsigned long)
+ cmd.cmd.slave_mask_addr);
+ break;
+ case IPATH_CMD_PIOAVAILUPD:
+ ipath_force_pio_avail_update(pd->port_dd);
+ break;
+ case IPATH_CMD_POLL_TYPE:
+ pd->poll_type = cmd.cmd.poll_type;
+ break;
+ case IPATH_CMD_ARMLAUNCH_CTRL:
+ if (cmd.cmd.armlaunch_ctrl)
+ ipath_enable_armlaunch(pd->port_dd);
+ else
+ ipath_disable_armlaunch(pd->port_dd);
+ break;
+ case IPATH_CMD_SDMA_INFLIGHT:
+ ret = ipath_sdma_get_inflight(user_sdma_queue_fp(fp),
+ (u32 __user *) (unsigned long)
+ cmd.cmd.sdma_inflight);
+ break;
+ case IPATH_CMD_SDMA_COMPLETE:
+ ret = ipath_sdma_get_complete(pd->port_dd,
+ user_sdma_queue_fp(fp),
+ (u32 __user *) (unsigned long)
+ cmd.cmd.sdma_complete);
+ break;
+ }
+
+ if (ret >= 0)
+ ret = consumed;
+
+bail:
+ return ret;
+}
+
+static ssize_t ipath_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+ struct file *filp = iocb->ki_filp;
+ struct ipath_filedata *fp = filp->private_data;
+ struct ipath_portdata *pd = port_fp(filp);
+ struct ipath_user_sdma_queue *pq = fp->pq;
+
+ if (!iter_is_iovec(from) || !from->nr_segs)
+ return -EINVAL;
+
+ return ipath_user_sdma_writev(pd->port_dd, pq, from->iov, from->nr_segs);
+}
+
+static struct class *ipath_class;
+
+static int init_cdev(int minor, char *name, const struct file_operations *fops,
+ struct cdev **cdevp, struct device **devp)
+{
+ const dev_t dev = MKDEV(IPATH_MAJOR, minor);
+ struct cdev *cdev = NULL;
+ struct device *device = NULL;
+ int ret;
+
+ cdev = cdev_alloc();
+ if (!cdev) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not allocate cdev for minor %d, %s\n",
+ minor, name);
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ cdev->owner = THIS_MODULE;
+ cdev->ops = fops;
+ kobject_set_name(&cdev->kobj, name);
+
+ ret = cdev_add(cdev, dev, 1);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME
+ ": Could not add cdev for minor %d, %s (err %d)\n",
+ minor, name, -ret);
+ goto err_cdev;
+ }
+
+ device = device_create(ipath_class, NULL, dev, NULL, name);
+
+ if (IS_ERR(device)) {
+ ret = PTR_ERR(device);
+ printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
+ "device for minor %d, %s (err %d)\n",
+ minor, name, -ret);
+ goto err_cdev;
+ }
+
+ goto done;
+
+err_cdev:
+ cdev_del(cdev);
+ cdev = NULL;
+
+done:
+ if (ret >= 0) {
+ *cdevp = cdev;
+ *devp = device;
+ } else {
+ *cdevp = NULL;
+ *devp = NULL;
+ }
+
+ return ret;
+}
+
+int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
+ struct cdev **cdevp, struct device **devp)
+{
+ return init_cdev(minor, name, fops, cdevp, devp);
+}
+
+static void cleanup_cdev(struct cdev **cdevp,
+ struct device **devp)
+{
+ struct device *dev = *devp;
+
+ if (dev) {
+ device_unregister(dev);
+ *devp = NULL;
+ }
+
+ if (*cdevp) {
+ cdev_del(*cdevp);
+ *cdevp = NULL;
+ }
+}
+
+void ipath_cdev_cleanup(struct cdev **cdevp,
+ struct device **devp)
+{
+ cleanup_cdev(cdevp, devp);
+}
+
+static struct cdev *wildcard_cdev;
+static struct device *wildcard_dev;
+
+static const dev_t dev = MKDEV(IPATH_MAJOR, 0);
+
+static int user_init(void)
+{
+ int ret;
+
+ ret = register_chrdev_region(dev, IPATH_NMINORS, IPATH_DRV_NAME);
+ if (ret < 0) {
+ printk(KERN_ERR IPATH_DRV_NAME ": Could not register "
+ "chrdev region (err %d)\n", -ret);
+ goto done;
+ }
+
+ ipath_class = class_create(THIS_MODULE, IPATH_DRV_NAME);
+
+ if (IS_ERR(ipath_class)) {
+ ret = PTR_ERR(ipath_class);
+ printk(KERN_ERR IPATH_DRV_NAME ": Could not create "
+ "device class (err %d)\n", -ret);
+ goto bail;
+ }
+
+ goto done;
+bail:
+ unregister_chrdev_region(dev, IPATH_NMINORS);
+done:
+ return ret;
+}
+
+static void user_cleanup(void)
+{
+ if (ipath_class) {
+ class_destroy(ipath_class);
+ ipath_class = NULL;
+ }
+
+ unregister_chrdev_region(dev, IPATH_NMINORS);
+}
+
+static atomic_t user_count = ATOMIC_INIT(0);
+static atomic_t user_setup = ATOMIC_INIT(0);
+
+int ipath_user_add(struct ipath_devdata *dd)
+{
+ char name[10];
+ int ret;
+
+ if (atomic_inc_return(&user_count) == 1) {
+ ret = user_init();
+ if (ret < 0) {
+ ipath_dev_err(dd, "Unable to set up user support: "
+ "error %d\n", -ret);
+ goto bail;
+ }
+ ret = init_cdev(0, "ipath", &ipath_file_ops, &wildcard_cdev,
+ &wildcard_dev);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Could not create wildcard "
+ "minor: error %d\n", -ret);
+ goto bail_user;
+ }
+
+ atomic_set(&user_setup, 1);
+ }
+
+ snprintf(name, sizeof(name), "ipath%d", dd->ipath_unit);
+
+ ret = init_cdev(dd->ipath_unit + 1, name, &ipath_file_ops,
+ &dd->user_cdev, &dd->user_dev);
+ if (ret < 0)
+ ipath_dev_err(dd, "Could not create user minor %d, %s\n",
+ dd->ipath_unit + 1, name);
+
+ goto bail;
+
+bail_user:
+ user_cleanup();
+bail:
+ return ret;
+}
+
+void ipath_user_remove(struct ipath_devdata *dd)
+{
+ cleanup_cdev(&dd->user_cdev, &dd->user_dev);
+
+ if (atomic_dec_return(&user_count) == 0) {
+ if (atomic_read(&user_setup) == 0)
+ goto bail;
+
+ cleanup_cdev(&wildcard_cdev, &wildcard_dev);
+ user_cleanup();
+
+ atomic_set(&user_setup, 0);
+ }
+bail:
+ return;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+#include <linux/pagemap.h>
+#include <linux/init.h>
+#include <linux/namei.h>
+#include <linux/slab.h>
+
+#include "ipath_kernel.h"
+
+#define IPATHFS_MAGIC 0x726a77
+
+static struct super_block *ipath_super;
+
+static int ipathfs_mknod(struct inode *dir, struct dentry *dentry,
+ umode_t mode, const struct file_operations *fops,
+ void *data)
+{
+ int error;
+ struct inode *inode = new_inode(dir->i_sb);
+
+ if (!inode) {
+ error = -EPERM;
+ goto bail;
+ }
+
+ inode->i_ino = get_next_ino();
+ inode->i_mode = mode;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ inode->i_private = data;
+ if (S_ISDIR(mode)) {
+ inode->i_op = &simple_dir_inode_operations;
+ inc_nlink(inode);
+ inc_nlink(dir);
+ }
+
+ inode->i_fop = fops;
+
+ d_instantiate(dentry, inode);
+ error = 0;
+
+bail:
+ return error;
+}
+
+static int create_file(const char *name, umode_t mode,
+ struct dentry *parent, struct dentry **dentry,
+ const struct file_operations *fops, void *data)
+{
+ int error;
+
+ mutex_lock(&d_inode(parent)->i_mutex);
+ *dentry = lookup_one_len(name, parent, strlen(name));
+ if (!IS_ERR(*dentry))
+ error = ipathfs_mknod(d_inode(parent), *dentry,
+ mode, fops, data);
+ else
+ error = PTR_ERR(*dentry);
+ mutex_unlock(&d_inode(parent)->i_mutex);
+
+ return error;
+}
+
+static ssize_t atomic_stats_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return simple_read_from_buffer(buf, count, ppos, &ipath_stats,
+ sizeof ipath_stats);
+}
+
+static const struct file_operations atomic_stats_ops = {
+ .read = atomic_stats_read,
+ .llseek = default_llseek,
+};
+
+static ssize_t atomic_counters_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct infinipath_counters counters;
+ struct ipath_devdata *dd;
+
+ dd = file_inode(file)->i_private;
+ dd->ipath_f_read_counters(dd, &counters);
+
+ return simple_read_from_buffer(buf, count, ppos, &counters,
+ sizeof counters);
+}
+
+static const struct file_operations atomic_counters_ops = {
+ .read = atomic_counters_read,
+ .llseek = default_llseek,
+};
+
+static ssize_t flash_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct ipath_devdata *dd;
+ ssize_t ret;
+ loff_t pos;
+ char *tmp;
+
+ pos = *ppos;
+
+ if ( pos < 0) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (pos >= sizeof(struct ipath_flash)) {
+ ret = 0;
+ goto bail;
+ }
+
+ if (count > sizeof(struct ipath_flash) - pos)
+ count = sizeof(struct ipath_flash) - pos;
+
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ dd = file_inode(file)->i_private;
+ if (ipath_eeprom_read(dd, pos, tmp, count)) {
+ ipath_dev_err(dd, "failed to read from flash\n");
+ ret = -ENXIO;
+ goto bail_tmp;
+ }
+
+ if (copy_to_user(buf, tmp, count)) {
+ ret = -EFAULT;
+ goto bail_tmp;
+ }
+
+ *ppos = pos + count;
+ ret = count;
+
+bail_tmp:
+ kfree(tmp);
+
+bail:
+ return ret;
+}
+
+static ssize_t flash_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct ipath_devdata *dd;
+ ssize_t ret;
+ loff_t pos;
+ char *tmp;
+
+ pos = *ppos;
+
+ if (pos != 0) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (count != sizeof(struct ipath_flash)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ if (copy_from_user(tmp, buf, count)) {
+ ret = -EFAULT;
+ goto bail_tmp;
+ }
+
+ dd = file_inode(file)->i_private;
+ if (ipath_eeprom_write(dd, pos, tmp, count)) {
+ ret = -ENXIO;
+ ipath_dev_err(dd, "failed to write to flash\n");
+ goto bail_tmp;
+ }
+
+ *ppos = pos + count;
+ ret = count;
+
+bail_tmp:
+ kfree(tmp);
+
+bail:
+ return ret;
+}
+
+static const struct file_operations flash_ops = {
+ .read = flash_read,
+ .write = flash_write,
+ .llseek = default_llseek,
+};
+
+static int create_device_files(struct super_block *sb,
+ struct ipath_devdata *dd)
+{
+ struct dentry *dir, *tmp;
+ char unit[10];
+ int ret;
+
+ snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
+ ret = create_file(unit, S_IFDIR|S_IRUGO|S_IXUGO, sb->s_root, &dir,
+ &simple_dir_operations, dd);
+ if (ret) {
+ printk(KERN_ERR "create_file(%s) failed: %d\n", unit, ret);
+ goto bail;
+ }
+
+ ret = create_file("atomic_counters", S_IFREG|S_IRUGO, dir, &tmp,
+ &atomic_counters_ops, dd);
+ if (ret) {
+ printk(KERN_ERR "create_file(%s/atomic_counters) "
+ "failed: %d\n", unit, ret);
+ goto bail;
+ }
+
+ ret = create_file("flash", S_IFREG|S_IWUSR|S_IRUGO, dir, &tmp,
+ &flash_ops, dd);
+ if (ret) {
+ printk(KERN_ERR "create_file(%s/flash) "
+ "failed: %d\n", unit, ret);
+ goto bail;
+ }
+
+bail:
+ return ret;
+}
+
+static int remove_file(struct dentry *parent, char *name)
+{
+ struct dentry *tmp;
+ int ret;
+
+ tmp = lookup_one_len(name, parent, strlen(name));
+
+ if (IS_ERR(tmp)) {
+ ret = PTR_ERR(tmp);
+ goto bail;
+ }
+
+ spin_lock(&tmp->d_lock);
+ if (simple_positive(tmp)) {
+ dget_dlock(tmp);
+ __d_drop(tmp);
+ spin_unlock(&tmp->d_lock);
+ simple_unlink(d_inode(parent), tmp);
+ } else
+ spin_unlock(&tmp->d_lock);
+
+ ret = 0;
+bail:
+ /*
+ * We don't expect clients to care about the return value, but
+ * it's there if they need it.
+ */
+ return ret;
+}
+
+static int remove_device_files(struct super_block *sb,
+ struct ipath_devdata *dd)
+{
+ struct dentry *dir, *root;
+ char unit[10];
+ int ret;
+
+ root = dget(sb->s_root);
+ mutex_lock(&d_inode(root)->i_mutex);
+ snprintf(unit, sizeof unit, "%02d", dd->ipath_unit);
+ dir = lookup_one_len(unit, root, strlen(unit));
+
+ if (IS_ERR(dir)) {
+ ret = PTR_ERR(dir);
+ printk(KERN_ERR "Lookup of %s failed\n", unit);
+ goto bail;
+ }
+
+ remove_file(dir, "flash");
+ remove_file(dir, "atomic_counters");
+ d_delete(dir);
+ ret = simple_rmdir(d_inode(root), dir);
+
+bail:
+ mutex_unlock(&d_inode(root)->i_mutex);
+ dput(root);
+ return ret;
+}
+
+static int ipathfs_fill_super(struct super_block *sb, void *data,
+ int silent)
+{
+ struct ipath_devdata *dd, *tmp;
+ unsigned long flags;
+ int ret;
+
+ static struct tree_descr files[] = {
+ [2] = {"atomic_stats", &atomic_stats_ops, S_IRUGO},
+ {""},
+ };
+
+ ret = simple_fill_super(sb, IPATHFS_MAGIC, files);
+ if (ret) {
+ printk(KERN_ERR "simple_fill_super failed: %d\n", ret);
+ goto bail;
+ }
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+ ret = create_device_files(sb, dd);
+ if (ret)
+ goto bail;
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+bail:
+ return ret;
+}
+
+static struct dentry *ipathfs_mount(struct file_system_type *fs_type,
+ int flags, const char *dev_name, void *data)
+{
+ struct dentry *ret;
+ ret = mount_single(fs_type, flags, data, ipathfs_fill_super);
+ if (!IS_ERR(ret))
+ ipath_super = ret->d_sb;
+ return ret;
+}
+
+static void ipathfs_kill_super(struct super_block *s)
+{
+ kill_litter_super(s);
+ ipath_super = NULL;
+}
+
+int ipathfs_add_device(struct ipath_devdata *dd)
+{
+ int ret;
+
+ if (ipath_super == NULL) {
+ ret = 0;
+ goto bail;
+ }
+
+ ret = create_device_files(ipath_super, dd);
+
+bail:
+ return ret;
+}
+
+int ipathfs_remove_device(struct ipath_devdata *dd)
+{
+ int ret;
+
+ if (ipath_super == NULL) {
+ ret = 0;
+ goto bail;
+ }
+
+ ret = remove_device_files(ipath_super, dd);
+
+bail:
+ return ret;
+}
+
+static struct file_system_type ipathfs_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "ipathfs",
+ .mount = ipathfs_mount,
+ .kill_sb = ipathfs_kill_super,
+};
+MODULE_ALIAS_FS("ipathfs");
+
+int __init ipath_init_ipathfs(void)
+{
+ return register_filesystem(&ipathfs_fs_type);
+}
+
+void __exit ipath_exit_ipathfs(void)
+{
+ unregister_filesystem(&ipathfs_fs_type);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains all of the code that is specific to the InfiniPath
+ * HT chip.
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/htirq.h>
+#include <rdma/ib_verbs.h>
+
+#include "ipath_kernel.h"
+#include "ipath_registers.h"
+
+static void ipath_setup_ht_setextled(struct ipath_devdata *, u64, u64);
+
+
+/*
+ * This lists the InfiniPath registers, in the actual chip layout.
+ * This structure should never be directly accessed.
+ *
+ * The names are in InterCap form because they're taken straight from
+ * the chip specification. Since they're only used in this file, they
+ * don't pollute the rest of the source.
+*/
+
+struct _infinipath_do_not_use_kernel_regs {
+ unsigned long long Revision;
+ unsigned long long Control;
+ unsigned long long PageAlign;
+ unsigned long long PortCnt;
+ unsigned long long DebugPortSelect;
+ unsigned long long DebugPort;
+ unsigned long long SendRegBase;
+ unsigned long long UserRegBase;
+ unsigned long long CounterRegBase;
+ unsigned long long Scratch;
+ unsigned long long ReservedMisc1;
+ unsigned long long InterruptConfig;
+ unsigned long long IntBlocked;
+ unsigned long long IntMask;
+ unsigned long long IntStatus;
+ unsigned long long IntClear;
+ unsigned long long ErrorMask;
+ unsigned long long ErrorStatus;
+ unsigned long long ErrorClear;
+ unsigned long long HwErrMask;
+ unsigned long long HwErrStatus;
+ unsigned long long HwErrClear;
+ unsigned long long HwDiagCtrl;
+ unsigned long long MDIO;
+ unsigned long long IBCStatus;
+ unsigned long long IBCCtrl;
+ unsigned long long ExtStatus;
+ unsigned long long ExtCtrl;
+ unsigned long long GPIOOut;
+ unsigned long long GPIOMask;
+ unsigned long long GPIOStatus;
+ unsigned long long GPIOClear;
+ unsigned long long RcvCtrl;
+ unsigned long long RcvBTHQP;
+ unsigned long long RcvHdrSize;
+ unsigned long long RcvHdrCnt;
+ unsigned long long RcvHdrEntSize;
+ unsigned long long RcvTIDBase;
+ unsigned long long RcvTIDCnt;
+ unsigned long long RcvEgrBase;
+ unsigned long long RcvEgrCnt;
+ unsigned long long RcvBufBase;
+ unsigned long long RcvBufSize;
+ unsigned long long RxIntMemBase;
+ unsigned long long RxIntMemSize;
+ unsigned long long RcvPartitionKey;
+ unsigned long long ReservedRcv[10];
+ unsigned long long SendCtrl;
+ unsigned long long SendPIOBufBase;
+ unsigned long long SendPIOSize;
+ unsigned long long SendPIOBufCnt;
+ unsigned long long SendPIOAvailAddr;
+ unsigned long long TxIntMemBase;
+ unsigned long long TxIntMemSize;
+ unsigned long long ReservedSend[9];
+ unsigned long long SendBufferError;
+ unsigned long long SendBufferErrorCONT1;
+ unsigned long long SendBufferErrorCONT2;
+ unsigned long long SendBufferErrorCONT3;
+ unsigned long long ReservedSBE[4];
+ unsigned long long RcvHdrAddr0;
+ unsigned long long RcvHdrAddr1;
+ unsigned long long RcvHdrAddr2;
+ unsigned long long RcvHdrAddr3;
+ unsigned long long RcvHdrAddr4;
+ unsigned long long RcvHdrAddr5;
+ unsigned long long RcvHdrAddr6;
+ unsigned long long RcvHdrAddr7;
+ unsigned long long RcvHdrAddr8;
+ unsigned long long ReservedRHA[7];
+ unsigned long long RcvHdrTailAddr0;
+ unsigned long long RcvHdrTailAddr1;
+ unsigned long long RcvHdrTailAddr2;
+ unsigned long long RcvHdrTailAddr3;
+ unsigned long long RcvHdrTailAddr4;
+ unsigned long long RcvHdrTailAddr5;
+ unsigned long long RcvHdrTailAddr6;
+ unsigned long long RcvHdrTailAddr7;
+ unsigned long long RcvHdrTailAddr8;
+ unsigned long long ReservedRHTA[7];
+ unsigned long long Sync; /* Software only */
+ unsigned long long Dump; /* Software only */
+ unsigned long long SimVer; /* Software only */
+ unsigned long long ReservedSW[5];
+ unsigned long long SerdesConfig0;
+ unsigned long long SerdesConfig1;
+ unsigned long long SerdesStatus;
+ unsigned long long XGXSConfig;
+ unsigned long long ReservedSW2[4];
+};
+
+struct _infinipath_do_not_use_counters {
+ __u64 LBIntCnt;
+ __u64 LBFlowStallCnt;
+ __u64 Reserved1;
+ __u64 TxUnsupVLErrCnt;
+ __u64 TxDataPktCnt;
+ __u64 TxFlowPktCnt;
+ __u64 TxDwordCnt;
+ __u64 TxLenErrCnt;
+ __u64 TxMaxMinLenErrCnt;
+ __u64 TxUnderrunCnt;
+ __u64 TxFlowStallCnt;
+ __u64 TxDroppedPktCnt;
+ __u64 RxDroppedPktCnt;
+ __u64 RxDataPktCnt;
+ __u64 RxFlowPktCnt;
+ __u64 RxDwordCnt;
+ __u64 RxLenErrCnt;
+ __u64 RxMaxMinLenErrCnt;
+ __u64 RxICRCErrCnt;
+ __u64 RxVCRCErrCnt;
+ __u64 RxFlowCtrlErrCnt;
+ __u64 RxBadFormatCnt;
+ __u64 RxLinkProblemCnt;
+ __u64 RxEBPCnt;
+ __u64 RxLPCRCErrCnt;
+ __u64 RxBufOvflCnt;
+ __u64 RxTIDFullErrCnt;
+ __u64 RxTIDValidErrCnt;
+ __u64 RxPKeyMismatchCnt;
+ __u64 RxP0HdrEgrOvflCnt;
+ __u64 RxP1HdrEgrOvflCnt;
+ __u64 RxP2HdrEgrOvflCnt;
+ __u64 RxP3HdrEgrOvflCnt;
+ __u64 RxP4HdrEgrOvflCnt;
+ __u64 RxP5HdrEgrOvflCnt;
+ __u64 RxP6HdrEgrOvflCnt;
+ __u64 RxP7HdrEgrOvflCnt;
+ __u64 RxP8HdrEgrOvflCnt;
+ __u64 Reserved6;
+ __u64 Reserved7;
+ __u64 IBStatusChangeCnt;
+ __u64 IBLinkErrRecoveryCnt;
+ __u64 IBLinkDownedCnt;
+ __u64 IBSymbolErrCnt;
+};
+
+#define IPATH_KREG_OFFSET(field) (offsetof( \
+ struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
+#define IPATH_CREG_OFFSET(field) (offsetof( \
+ struct _infinipath_do_not_use_counters, field) / sizeof(u64))
+
+static const struct ipath_kregs ipath_ht_kregs = {
+ .kr_control = IPATH_KREG_OFFSET(Control),
+ .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
+ .kr_debugport = IPATH_KREG_OFFSET(DebugPort),
+ .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
+ .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
+ .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
+ .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
+ .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
+ .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
+ .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
+ .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
+ .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
+ .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
+ .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
+ .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
+ .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
+ .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
+ .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
+ .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
+ .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
+ .kr_intclear = IPATH_KREG_OFFSET(IntClear),
+ .kr_interruptconfig = IPATH_KREG_OFFSET(InterruptConfig),
+ .kr_intmask = IPATH_KREG_OFFSET(IntMask),
+ .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
+ .kr_mdio = IPATH_KREG_OFFSET(MDIO),
+ .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
+ .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
+ .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
+ .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
+ .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
+ .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
+ .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
+ .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
+ .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
+ .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
+ .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
+ .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
+ .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
+ .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
+ .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
+ .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
+ .kr_revision = IPATH_KREG_OFFSET(Revision),
+ .kr_scratch = IPATH_KREG_OFFSET(Scratch),
+ .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
+ .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
+ .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
+ .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
+ .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
+ .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
+ .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
+ .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
+ .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
+ .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
+ .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
+ .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
+ .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
+ .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
+ /*
+ * These should not be used directly via ipath_write_kreg64(),
+ * use them with ipath_write_kreg64_port(),
+ */
+ .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
+ .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0)
+};
+
+static const struct ipath_cregs ipath_ht_cregs = {
+ .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
+ .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
+ .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
+ .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
+ .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
+ .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
+ .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
+ .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
+ .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
+ .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
+ .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
+ .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
+ /* calc from Reg_CounterRegBase + offset */
+ .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
+ .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
+ .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
+ .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
+ .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
+ .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
+ .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
+ .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
+ .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
+ .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
+ .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
+ .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
+ .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
+ .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
+ .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
+ .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
+ .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
+ .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
+ .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
+ .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
+ .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
+};
+
+/* kr_intstatus, kr_intclear, kr_intmask bits */
+#define INFINIPATH_I_RCVURG_MASK ((1U<<9)-1)
+#define INFINIPATH_I_RCVURG_SHIFT 0
+#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<9)-1)
+#define INFINIPATH_I_RCVAVAIL_SHIFT 12
+
+/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
+#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
+#define INFINIPATH_HWE_HTCMEMPARITYERR_MASK 0x3FFFFFULL
+#define INFINIPATH_HWE_HTCLNKABYTE0CRCERR 0x0000000000800000ULL
+#define INFINIPATH_HWE_HTCLNKABYTE1CRCERR 0x0000000001000000ULL
+#define INFINIPATH_HWE_HTCLNKBBYTE0CRCERR 0x0000000002000000ULL
+#define INFINIPATH_HWE_HTCLNKBBYTE1CRCERR 0x0000000004000000ULL
+#define INFINIPATH_HWE_HTCMISCERR4 0x0000000008000000ULL
+#define INFINIPATH_HWE_HTCMISCERR5 0x0000000010000000ULL
+#define INFINIPATH_HWE_HTCMISCERR6 0x0000000020000000ULL
+#define INFINIPATH_HWE_HTCMISCERR7 0x0000000040000000ULL
+#define INFINIPATH_HWE_HTCBUSTREQPARITYERR 0x0000000080000000ULL
+#define INFINIPATH_HWE_HTCBUSTRESPPARITYERR 0x0000000100000000ULL
+#define INFINIPATH_HWE_HTCBUSIREQPARITYERR 0x0000000200000000ULL
+#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
+#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
+#define INFINIPATH_HWE_HTBPLL_FBSLIP 0x0200000000000000ULL
+#define INFINIPATH_HWE_HTBPLL_RFSLIP 0x0400000000000000ULL
+#define INFINIPATH_HWE_HTAPLL_FBSLIP 0x0800000000000000ULL
+#define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL
+#define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL
+
+#define IBA6110_IBCS_LINKTRAININGSTATE_MASK 0xf
+#define IBA6110_IBCS_LINKSTATE_SHIFT 4
+
+/* kr_extstatus bits */
+#define INFINIPATH_EXTS_FREQSEL 0x2
+#define INFINIPATH_EXTS_SERDESSEL 0x4
+#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
+#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000
+
+
+/* TID entries (memory), HT-only */
+#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
+#define INFINIPATH_RT_VALID 0x8000000000000000ULL
+#define INFINIPATH_RT_ADDR_SHIFT 0
+#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFFULL
+#define INFINIPATH_RT_BUFSIZE_SHIFT 48
+
+#define INFINIPATH_R_INTRAVAIL_SHIFT 16
+#define INFINIPATH_R_TAILUPD_SHIFT 31
+
+/* kr_xgxsconfig bits */
+#define INFINIPATH_XGXS_RESET 0x7ULL
+
+/*
+ * masks and bits that are different in different chips, or present only
+ * in one
+ */
+static const ipath_err_t infinipath_hwe_htcmemparityerr_mask =
+ INFINIPATH_HWE_HTCMEMPARITYERR_MASK;
+static const ipath_err_t infinipath_hwe_htcmemparityerr_shift =
+ INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT;
+
+static const ipath_err_t infinipath_hwe_htclnkabyte0crcerr =
+ INFINIPATH_HWE_HTCLNKABYTE0CRCERR;
+static const ipath_err_t infinipath_hwe_htclnkabyte1crcerr =
+ INFINIPATH_HWE_HTCLNKABYTE1CRCERR;
+static const ipath_err_t infinipath_hwe_htclnkbbyte0crcerr =
+ INFINIPATH_HWE_HTCLNKBBYTE0CRCERR;
+static const ipath_err_t infinipath_hwe_htclnkbbyte1crcerr =
+ INFINIPATH_HWE_HTCLNKBBYTE1CRCERR;
+
+#define _IPATH_GPIO_SDA_NUM 1
+#define _IPATH_GPIO_SCL_NUM 0
+
+#define IPATH_GPIO_SDA \
+ (1ULL << (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+#define IPATH_GPIO_SCL \
+ (1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+
+/* keep the code below somewhat more readable; not used elsewhere */
+#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
+ infinipath_hwe_htclnkabyte1crcerr)
+#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
+ infinipath_hwe_htclnkbbyte1crcerr)
+#define _IPATH_HTLANE0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
+ infinipath_hwe_htclnkbbyte0crcerr)
+#define _IPATH_HTLANE1_CRCBITS (infinipath_hwe_htclnkabyte1crcerr | \
+ infinipath_hwe_htclnkbbyte1crcerr)
+
+static void hwerr_crcbits(struct ipath_devdata *dd, ipath_err_t hwerrs,
+ char *msg, size_t msgl)
+{
+ char bitsmsg[64];
+ ipath_err_t crcbits = hwerrs &
+ (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS);
+ /* don't check if 8bit HT */
+ if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
+ crcbits &= ~infinipath_hwe_htclnkabyte1crcerr;
+ /* don't check if 8bit HT */
+ if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
+ crcbits &= ~infinipath_hwe_htclnkbbyte1crcerr;
+ /*
+ * we'll want to ignore link errors on link that is
+ * not in use, if any. For now, complain about both
+ */
+ if (crcbits) {
+ u16 ctrl0, ctrl1;
+ snprintf(bitsmsg, sizeof bitsmsg,
+ "[HT%s lane %s CRC (%llx); powercycle to completely clear]",
+ !(crcbits & _IPATH_HTLINK1_CRCBITS) ?
+ "0 (A)" : (!(crcbits & _IPATH_HTLINK0_CRCBITS)
+ ? "1 (B)" : "0+1 (A+B)"),
+ !(crcbits & _IPATH_HTLANE1_CRCBITS) ? "0"
+ : (!(crcbits & _IPATH_HTLANE0_CRCBITS) ? "1" :
+ "0+1"), (unsigned long long) crcbits);
+ strlcat(msg, bitsmsg, msgl);
+
+ /*
+ * print extra info for debugging. slave/primary
+ * config word 4, 8 (link control 0, 1)
+ */
+
+ if (pci_read_config_word(dd->pcidev,
+ dd->ipath_ht_slave_off + 0x4,
+ &ctrl0))
+ dev_info(&dd->pcidev->dev, "Couldn't read "
+ "linkctrl0 of slave/primary "
+ "config block\n");
+ else if (!(ctrl0 & 1 << 6))
+ /* not if EOC bit set */
+ ipath_dbg("HT linkctrl0 0x%x%s%s\n", ctrl0,
+ ((ctrl0 >> 8) & 7) ? " CRC" : "",
+ ((ctrl0 >> 4) & 1) ? "linkfail" :
+ "");
+ if (pci_read_config_word(dd->pcidev,
+ dd->ipath_ht_slave_off + 0x8,
+ &ctrl1))
+ dev_info(&dd->pcidev->dev, "Couldn't read "
+ "linkctrl1 of slave/primary "
+ "config block\n");
+ else if (!(ctrl1 & 1 << 6))
+ /* not if EOC bit set */
+ ipath_dbg("HT linkctrl1 0x%x%s%s\n", ctrl1,
+ ((ctrl1 >> 8) & 7) ? " CRC" : "",
+ ((ctrl1 >> 4) & 1) ? "linkfail" :
+ "");
+
+ /* disable until driver reloaded */
+ dd->ipath_hwerrmask &= ~crcbits;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ ipath_dbg("HT crc errs: %s\n", msg);
+ } else
+ ipath_dbg("ignoring HT crc errors 0x%llx, "
+ "not in use\n", (unsigned long long)
+ (hwerrs & (_IPATH_HTLINK0_CRCBITS |
+ _IPATH_HTLINK1_CRCBITS)));
+}
+
+/* 6110 specific hardware errors... */
+static const struct ipath_hwerror_msgs ipath_6110_hwerror_msgs[] = {
+ INFINIPATH_HWE_MSG(HTCBUSIREQPARITYERR, "HTC Ireq Parity"),
+ INFINIPATH_HWE_MSG(HTCBUSTREQPARITYERR, "HTC Treq Parity"),
+ INFINIPATH_HWE_MSG(HTCBUSTRESPPARITYERR, "HTC Tresp Parity"),
+ INFINIPATH_HWE_MSG(HTCMISCERR5, "HT core Misc5"),
+ INFINIPATH_HWE_MSG(HTCMISCERR6, "HT core Misc6"),
+ INFINIPATH_HWE_MSG(HTCMISCERR7, "HT core Misc7"),
+ INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
+ INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
+};
+
+#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
+ << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
+
+static void ipath_ht_txe_recover(struct ipath_devdata *dd)
+{
+ ++ipath_stats.sps_txeparity;
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+}
+
+
+/**
+ * ipath_ht_handle_hwerrors - display hardware errors.
+ * @dd: the infinipath device
+ * @msg: the output buffer
+ * @msgl: the size of the output buffer
+ *
+ * Use same msg buffer as regular errors to avoid excessive stack
+ * use. Most hardware errors are catastrophic, but for right now,
+ * we'll print them and continue. We reuse the same message buffer as
+ * ipath_handle_errors() to avoid excessive stack usage.
+ */
+static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
+ size_t msgl)
+{
+ ipath_err_t hwerrs;
+ u32 bits, ctrl;
+ int isfatal = 0;
+ char bitsmsg[64];
+ int log_idx;
+
+ hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
+
+ if (!hwerrs) {
+ ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
+ /*
+ * better than printing cofusing messages
+ * This seems to be related to clearing the crc error, or
+ * the pll error during init.
+ */
+ goto bail;
+ } else if (hwerrs == -1LL) {
+ ipath_dev_err(dd, "Read of hardware error status failed "
+ "(all bits set); ignoring\n");
+ goto bail;
+ }
+ ipath_stats.sps_hwerrs++;
+
+ /* Always clear the error status register, except MEMBISTFAIL,
+ * regardless of whether we continue or stop using the chip.
+ * We want that set so we know it failed, even across driver reload.
+ * We'll still ignore it in the hwerrmask. We do this partly for
+ * diagnostics, but also for support */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
+
+ hwerrs &= dd->ipath_hwerrmask;
+
+ /* We log some errors to EEPROM, check if we have any of those. */
+ for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
+ if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
+ ipath_inc_eeprom_err(dd, log_idx, 1);
+
+ /*
+ * make sure we get this much out, unless told to be quiet,
+ * it's a parity error we may recover from,
+ * or it's occurred within the last 5 seconds
+ */
+ if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
+ RXE_EAGER_PARITY)) ||
+ (ipath_debug & __IPATH_VERBDBG))
+ dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
+ "(cleared)\n", (unsigned long long) hwerrs);
+ dd->ipath_lasthwerror |= hwerrs;
+
+ if (hwerrs & ~dd->ipath_hwe_bitsextant)
+ ipath_dev_err(dd, "hwerror interrupt with unknown errors "
+ "%llx set\n", (unsigned long long)
+ (hwerrs & ~dd->ipath_hwe_bitsextant));
+
+ ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
+ if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
+ /*
+ * parity errors in send memory are recoverable,
+ * just cancel the send (if indicated in * sendbuffererror),
+ * count the occurrence, unfreeze (if no other handled
+ * hardware error bits are set), and continue. They can
+ * occur if a processor speculative read is done to the PIO
+ * buffer while we are sending a packet, for example.
+ */
+ if (hwerrs & TXE_PIO_PARITY) {
+ ipath_ht_txe_recover(dd);
+ hwerrs &= ~TXE_PIO_PARITY;
+ }
+
+ if (!hwerrs) {
+ ipath_dbg("Clearing freezemode on ignored or "
+ "recovered hardware error\n");
+ ipath_clear_freeze(dd);
+ }
+ }
+
+ *msg = '\0';
+
+ /*
+ * may someday want to decode into which bits are which
+ * functional area for parity errors, etc.
+ */
+ if (hwerrs & (infinipath_hwe_htcmemparityerr_mask
+ << INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT)) {
+ bits = (u32) ((hwerrs >>
+ INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) &
+ INFINIPATH_HWE_HTCMEMPARITYERR_MASK);
+ snprintf(bitsmsg, sizeof bitsmsg, "[HTC Parity Errs %x] ",
+ bits);
+ strlcat(msg, bitsmsg, msgl);
+ }
+
+ ipath_format_hwerrors(hwerrs,
+ ipath_6110_hwerror_msgs,
+ ARRAY_SIZE(ipath_6110_hwerror_msgs),
+ msg, msgl);
+
+ if (hwerrs & (_IPATH_HTLINK0_CRCBITS | _IPATH_HTLINK1_CRCBITS))
+ hwerr_crcbits(dd, hwerrs, msg, msgl);
+
+ if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
+ strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
+ INFINIPATH_HWE_COREPLL_RFSLIP | \
+ INFINIPATH_HWE_HTBPLL_FBSLIP | \
+ INFINIPATH_HWE_HTBPLL_RFSLIP | \
+ INFINIPATH_HWE_HTAPLL_FBSLIP | \
+ INFINIPATH_HWE_HTAPLL_RFSLIP)
+
+ if (hwerrs & _IPATH_PLL_FAIL) {
+ snprintf(bitsmsg, sizeof bitsmsg,
+ "[PLL failed (%llx), InfiniPath hardware unusable]",
+ (unsigned long long) (hwerrs & _IPATH_PLL_FAIL));
+ strlcat(msg, bitsmsg, msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+ if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
+ /*
+ * If it occurs, it is left masked since the eternal
+ * interface is unused
+ */
+ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+ if (hwerrs) {
+ /*
+ * if any set that we aren't ignoring; only
+ * make the complaint once, in case it's stuck
+ * or recurring, and we get here multiple
+ * times.
+ * force link down, so switch knows, and
+ * LEDs are turned off
+ */
+ if (dd->ipath_flags & IPATH_INITTED) {
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ ipath_setup_ht_setextled(dd,
+ INFINIPATH_IBCS_L_STATE_DOWN,
+ INFINIPATH_IBCS_LT_STATE_DISABLED);
+ ipath_dev_err(dd, "Fatal Hardware Error (freeze "
+ "mode), no longer usable, SN %.16s\n",
+ dd->ipath_serial);
+ isfatal = 1;
+ }
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ /* mark as having had error */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ /*
+ * mark as not usable, at a minimum until driver
+ * is reloaded, probably until reboot, since no
+ * other reset is possible.
+ */
+ dd->ipath_flags &= ~IPATH_INITTED;
+ }
+ else
+ *msg = 0; /* recovered from all of them */
+ if (*msg)
+ ipath_dev_err(dd, "%s hardware error\n", msg);
+ if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
+ /*
+ * for status file; if no trailing brace is copied,
+ * we'll know it was truncated.
+ */
+ snprintf(dd->ipath_freezemsg,
+ dd->ipath_freezelen, "{%s}", msg);
+
+bail:;
+}
+
+/**
+ * ipath_ht_boardname - fill in the board name
+ * @dd: the infinipath device
+ * @name: the output buffer
+ * @namelen: the size of the output buffer
+ *
+ * fill in the board name, based on the board revision register
+ */
+static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
+ size_t namelen)
+{
+ char *n = NULL;
+ u8 boardrev = dd->ipath_boardrev;
+ int ret = 0;
+
+ switch (boardrev) {
+ case 5:
+ /*
+ * original production board; two production levels, with
+ * different serial number ranges. See ipath_ht_early_init() for
+ * case where we enable IPATH_GPIO_INTR for later serial # range.
+ * Original 112* serial number is no longer supported.
+ */
+ n = "InfiniPath_QHT7040";
+ break;
+ case 7:
+ /* small form factor production board */
+ n = "InfiniPath_QHT7140";
+ break;
+ default: /* don't know, just print the number */
+ ipath_dev_err(dd, "Don't yet know about board "
+ "with ID %u\n", boardrev);
+ snprintf(name, namelen, "Unknown_InfiniPath_QHT7xxx_%u",
+ boardrev);
+ break;
+ }
+ if (n)
+ snprintf(name, namelen, "%s", n);
+
+ if (ret) {
+ ipath_dev_err(dd, "Unsupported InfiniPath board %s!\n", name);
+ goto bail;
+ }
+ if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 ||
+ dd->ipath_minrev > 4)) {
+ /*
+ * This version of the driver only supports Rev 3.2 - 3.4
+ */
+ ipath_dev_err(dd,
+ "Unsupported InfiniPath hardware revision %u.%u!\n",
+ dd->ipath_majrev, dd->ipath_minrev);
+ ret = 1;
+ goto bail;
+ }
+ /*
+ * pkt/word counters are 32 bit, and therefore wrap fast enough
+ * that we snapshot them from a timer, and maintain 64 bit shadow
+ * copies
+ */
+ dd->ipath_flags |= IPATH_32BITCOUNTERS;
+ dd->ipath_flags |= IPATH_GPIO_INTR;
+ if (dd->ipath_lbus_speed != 800)
+ ipath_dev_err(dd,
+ "Incorrectly configured for HT @ %uMHz\n",
+ dd->ipath_lbus_speed);
+
+ /*
+ * set here, not in ipath_init_*_funcs because we have to do
+ * it after we can read chip registers.
+ */
+ dd->ipath_ureg_align =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
+
+bail:
+ return ret;
+}
+
+static void ipath_check_htlink(struct ipath_devdata *dd)
+{
+ u8 linkerr, link_off, i;
+
+ for (i = 0; i < 2; i++) {
+ link_off = dd->ipath_ht_slave_off + i * 4 + 0xd;
+ if (pci_read_config_byte(dd->pcidev, link_off, &linkerr))
+ dev_info(&dd->pcidev->dev, "Couldn't read "
+ "linkerror%d of HT slave/primary block\n",
+ i);
+ else if (linkerr & 0xf0) {
+ ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
+ "clearing\n", linkerr >> 4, i);
+ /*
+ * writing the linkerr bits that are set should
+ * clear them
+ */
+ if (pci_write_config_byte(dd->pcidev, link_off,
+ linkerr))
+ ipath_dbg("Failed write to clear HT "
+ "linkerror%d\n", i);
+ if (pci_read_config_byte(dd->pcidev, link_off,
+ &linkerr))
+ dev_info(&dd->pcidev->dev,
+ "Couldn't reread linkerror%d of "
+ "HT slave/primary block\n", i);
+ else if (linkerr & 0xf0)
+ dev_info(&dd->pcidev->dev,
+ "HT linkerror%d bits 0x%x "
+ "couldn't be cleared\n",
+ i, linkerr >> 4);
+ }
+ }
+}
+
+static int ipath_setup_ht_reset(struct ipath_devdata *dd)
+{
+ ipath_dbg("No reset possible for this InfiniPath hardware\n");
+ return 0;
+}
+
+#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
+#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
+
+/*
+ * Bits 13-15 of command==0 is slave/primary block. Clear any HT CRC
+ * errors. We only bother to do this at load time, because it's OK if
+ * it happened before we were loaded (first time after boot/reset),
+ * but any time after that, it's fatal anyway. Also need to not check
+ * for upper byte errors if we are in 8 bit mode, so figure out
+ * our width. For now, at least, also complain if it's 8 bit.
+ */
+static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
+ int pos, u8 cap_type)
+{
+ u8 linkwidth = 0, linkerr, link_a_b_off, link_off;
+ u16 linkctrl = 0;
+ int i;
+
+ dd->ipath_ht_slave_off = pos;
+ /* command word, master_host bit */
+ /* master host || slave */
+ if ((cap_type >> 2) & 1)
+ link_a_b_off = 4;
+ else
+ link_a_b_off = 0;
+ ipath_cdbg(VERBOSE, "HT%u (Link %c) connected to processor\n",
+ link_a_b_off ? 1 : 0,
+ link_a_b_off ? 'B' : 'A');
+
+ link_a_b_off += pos;
+
+ /*
+ * check both link control registers; clear both HT CRC sets if
+ * necessary.
+ */
+ for (i = 0; i < 2; i++) {
+ link_off = pos + i * 4 + 0x4;
+ if (pci_read_config_word(pdev, link_off, &linkctrl))
+ ipath_dev_err(dd, "Couldn't read HT link control%d "
+ "register\n", i);
+ else if (linkctrl & (0xf << 8)) {
+ ipath_cdbg(VERBOSE, "Clear linkctrl%d CRC Error "
+ "bits %x\n", i, linkctrl & (0xf << 8));
+ /*
+ * now write them back to clear the error.
+ */
+ pci_write_config_word(pdev, link_off,
+ linkctrl & (0xf << 8));
+ }
+ }
+
+ /*
+ * As with HT CRC bits, same for protocol errors that might occur
+ * during boot.
+ */
+ for (i = 0; i < 2; i++) {
+ link_off = pos + i * 4 + 0xd;
+ if (pci_read_config_byte(pdev, link_off, &linkerr))
+ dev_info(&pdev->dev, "Couldn't read linkerror%d "
+ "of HT slave/primary block\n", i);
+ else if (linkerr & 0xf0) {
+ ipath_cdbg(VERBOSE, "HT linkerr%d bits 0x%x set, "
+ "clearing\n", linkerr >> 4, i);
+ /*
+ * writing the linkerr bits that are set will clear
+ * them
+ */
+ if (pci_write_config_byte
+ (pdev, link_off, linkerr))
+ ipath_dbg("Failed write to clear HT "
+ "linkerror%d\n", i);
+ if (pci_read_config_byte(pdev, link_off, &linkerr))
+ dev_info(&pdev->dev, "Couldn't reread "
+ "linkerror%d of HT slave/primary "
+ "block\n", i);
+ else if (linkerr & 0xf0)
+ dev_info(&pdev->dev, "HT linkerror%d bits "
+ "0x%x couldn't be cleared\n",
+ i, linkerr >> 4);
+ }
+ }
+
+ /*
+ * this is just for our link to the host, not devices connected
+ * through tunnel.
+ */
+
+ if (pci_read_config_byte(pdev, link_a_b_off + 7, &linkwidth))
+ ipath_dev_err(dd, "Couldn't read HT link width "
+ "config register\n");
+ else {
+ u32 width;
+ switch (linkwidth & 7) {
+ case 5:
+ width = 4;
+ break;
+ case 4:
+ width = 2;
+ break;
+ case 3:
+ width = 32;
+ break;
+ case 1:
+ width = 16;
+ break;
+ case 0:
+ default: /* if wrong, assume 8 bit */
+ width = 8;
+ break;
+ }
+
+ dd->ipath_lbus_width = width;
+
+ if (linkwidth != 0x11) {
+ ipath_dev_err(dd, "Not configured for 16 bit HT "
+ "(%x)\n", linkwidth);
+ if (!(linkwidth & 0xf)) {
+ ipath_dbg("Will ignore HT lane1 errors\n");
+ dd->ipath_flags |= IPATH_8BIT_IN_HT0;
+ }
+ }
+ }
+
+ /*
+ * this is just for our link to the host, not devices connected
+ * through tunnel.
+ */
+ if (pci_read_config_byte(pdev, link_a_b_off + 0xd, &linkwidth))
+ ipath_dev_err(dd, "Couldn't read HT link frequency "
+ "config register\n");
+ else {
+ u32 speed;
+ switch (linkwidth & 0xf) {
+ case 6:
+ speed = 1000;
+ break;
+ case 5:
+ speed = 800;
+ break;
+ case 4:
+ speed = 600;
+ break;
+ case 3:
+ speed = 500;
+ break;
+ case 2:
+ speed = 400;
+ break;
+ case 1:
+ speed = 300;
+ break;
+ default:
+ /*
+ * assume reserved and vendor-specific are 200...
+ */
+ case 0:
+ speed = 200;
+ break;
+ }
+ dd->ipath_lbus_speed = speed;
+ }
+
+ snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
+ "HyperTransport,%uMHz,x%u\n",
+ dd->ipath_lbus_speed,
+ dd->ipath_lbus_width);
+}
+
+static int ipath_ht_intconfig(struct ipath_devdata *dd)
+{
+ int ret;
+
+ if (dd->ipath_intconfig) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig,
+ dd->ipath_intconfig); /* interrupt address */
+ ret = 0;
+ } else {
+ ipath_dev_err(dd, "No interrupts enabled, couldn't setup "
+ "interrupt address\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void ipath_ht_irq_update(struct pci_dev *dev, int irq,
+ struct ht_irq_msg *msg)
+{
+ struct ipath_devdata *dd = pci_get_drvdata(dev);
+ u64 prev_intconfig = dd->ipath_intconfig;
+
+ dd->ipath_intconfig = msg->address_lo;
+ dd->ipath_intconfig |= ((u64) msg->address_hi) << 32;
+
+ /*
+ * If the previous value of dd->ipath_intconfig is zero, we're
+ * getting configured for the first time, and must not program the
+ * intconfig register here (it will be programmed later, when the
+ * hardware is ready). Otherwise, we should.
+ */
+ if (prev_intconfig)
+ ipath_ht_intconfig(dd);
+}
+
+/**
+ * ipath_setup_ht_config - setup the interruptconfig register
+ * @dd: the infinipath device
+ * @pdev: the PCI device
+ *
+ * setup the interruptconfig register from the HT config info.
+ * Also clear CRC errors in HT linkcontrol, if necessary.
+ * This is done only for the real hardware. It is done before
+ * chip address space is initted, so can't touch infinipath registers
+ */
+static int ipath_setup_ht_config(struct ipath_devdata *dd,
+ struct pci_dev *pdev)
+{
+ int pos, ret;
+
+ ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Couldn't create interrupt handler: "
+ "err %d\n", ret);
+ goto bail;
+ }
+ dd->ipath_irq = ret;
+ ret = 0;
+
+ /*
+ * Handle clearing CRC errors in linkctrl register if necessary. We
+ * do this early, before we ever enable errors or hardware errors,
+ * mostly to avoid causing the chip to enter freeze mode.
+ */
+ pos = pci_find_capability(pdev, PCI_CAP_ID_HT);
+ if (!pos) {
+ ipath_dev_err(dd, "Couldn't find HyperTransport "
+ "capability; no interrupts\n");
+ ret = -ENODEV;
+ goto bail;
+ }
+ do {
+ u8 cap_type;
+
+ /*
+ * The HT capability type byte is 3 bytes after the
+ * capability byte.
+ */
+ if (pci_read_config_byte(pdev, pos + 3, &cap_type)) {
+ dev_info(&pdev->dev, "Couldn't read config "
+ "command @ %d\n", pos);
+ continue;
+ }
+ if (!(cap_type & 0xE0))
+ slave_or_pri_blk(dd, pdev, pos, cap_type);
+ } while ((pos = pci_find_next_capability(pdev, pos,
+ PCI_CAP_ID_HT)));
+
+ dd->ipath_flags |= IPATH_SWAP_PIOBUFS;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_setup_ht_cleanup - clean up any per-chip chip-specific stuff
+ * @dd: the infinipath device
+ *
+ * Called during driver unload.
+ * This is currently a nop for the HT chip, not for all chips
+ */
+static void ipath_setup_ht_cleanup(struct ipath_devdata *dd)
+{
+}
+
+/**
+ * ipath_setup_ht_setextled - set the state of the two external LEDs
+ * @dd: the infinipath device
+ * @lst: the L state
+ * @ltst: the LT state
+ *
+ * Set the state of the two external LEDs, to indicate physical and
+ * logical state of IB link. For this chip (at least with recommended
+ * board pinouts), LED1 is Green (physical state), and LED2 is Yellow
+ * (logical state)
+ *
+ * Note: We try to match the Mellanox HCA LED behavior as best
+ * we can. Green indicates physical link state is OK (something is
+ * plugged in, and we can train).
+ * Amber indicates the link is logically up (ACTIVE).
+ * Mellanox further blinks the amber LED to indicate data packet
+ * activity, but we have no hardware support for that, so it would
+ * require waking up every 10-20 msecs and checking the counters
+ * on the chip, and then turning the LED off if appropriate. That's
+ * visible overhead, so not something we will do.
+ *
+ */
+static void ipath_setup_ht_setextled(struct ipath_devdata *dd,
+ u64 lst, u64 ltst)
+{
+ u64 extctl;
+ unsigned long flags = 0;
+
+ /* the diags use the LED to indicate diag info, so we leave
+ * the external LED alone when the diags are running */
+ if (ipath_diag_inuse)
+ return;
+
+ /* Allow override of LED display for, e.g. Locating system in rack */
+ if (dd->ipath_led_override) {
+ ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
+ ? INFINIPATH_IBCS_LT_STATE_LINKUP
+ : INFINIPATH_IBCS_LT_STATE_DISABLED;
+ lst = (dd->ipath_led_override & IPATH_LED_LOG)
+ ? INFINIPATH_IBCS_L_STATE_ACTIVE
+ : INFINIPATH_IBCS_L_STATE_DOWN;
+ }
+
+ spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
+ /*
+ * start by setting both LED control bits to off, then turn
+ * on the appropriate bit(s).
+ */
+ if (dd->ipath_boardrev == 8) { /* LS/X-1 uses different pins */
+ /*
+ * major difference is that INFINIPATH_EXTC_LEDGBLERR_OFF
+ * is inverted, because it is normally used to indicate
+ * a hardware fault at reset, if there were errors
+ */
+ extctl = (dd->ipath_extctrl & ~INFINIPATH_EXTC_LEDGBLOK_ON)
+ | INFINIPATH_EXTC_LEDGBLERR_OFF;
+ if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
+ extctl &= ~INFINIPATH_EXTC_LEDGBLERR_OFF;
+ if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
+ extctl |= INFINIPATH_EXTC_LEDGBLOK_ON;
+ }
+ else {
+ extctl = dd->ipath_extctrl &
+ ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
+ INFINIPATH_EXTC_LED2PRIPORT_ON);
+ if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
+ extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
+ if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
+ extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
+ }
+ dd->ipath_extctrl = extctl;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
+ spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
+}
+
+static void ipath_init_ht_variables(struct ipath_devdata *dd)
+{
+ /*
+ * setup the register offsets, since they are different for each
+ * chip
+ */
+ dd->ipath_kregs = &ipath_ht_kregs;
+ dd->ipath_cregs = &ipath_ht_cregs;
+
+ dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
+ dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
+ dd->ipath_gpio_sda = IPATH_GPIO_SDA;
+ dd->ipath_gpio_scl = IPATH_GPIO_SCL;
+
+ /*
+ * Fill in data for field-values that change in newer chips.
+ * We dynamically specify only the mask for LINKTRAININGSTATE
+ * and only the shift for LINKSTATE, as they are the only ones
+ * that change. Also precalculate the 3 link states of interest
+ * and the combined mask.
+ */
+ dd->ibcs_ls_shift = IBA6110_IBCS_LINKSTATE_SHIFT;
+ dd->ibcs_lts_mask = IBA6110_IBCS_LINKTRAININGSTATE_MASK;
+ dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
+ dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
+ dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
+ dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
+ dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
+
+ /*
+ * Fill in data for ibcc field-values that change in newer chips.
+ * We dynamically specify only the mask for LINKINITCMD
+ * and only the shift for LINKCMD and MAXPKTLEN, as they are
+ * the only ones that change.
+ */
+ dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
+ dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
+ dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+
+ /* Fill in shifts for RcvCtrl. */
+ dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
+ dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
+ dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT;
+ dd->ipath_r_portcfg_shift = 0; /* Not on IBA6110 */
+
+ dd->ipath_i_bitsextant =
+ (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
+ (INFINIPATH_I_RCVAVAIL_MASK <<
+ INFINIPATH_I_RCVAVAIL_SHIFT) |
+ INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
+ INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
+
+ dd->ipath_e_bitsextant =
+ INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
+ INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
+ INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
+ INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
+ INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
+ INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
+ INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
+ INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
+ INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
+ INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
+ INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
+ INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
+ INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
+ INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
+ INFINIPATH_E_HARDWARE;
+
+ dd->ipath_hwe_bitsextant =
+ (INFINIPATH_HWE_HTCMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT) |
+ (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
+ (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
+ INFINIPATH_HWE_HTCLNKABYTE0CRCERR |
+ INFINIPATH_HWE_HTCLNKABYTE1CRCERR |
+ INFINIPATH_HWE_HTCLNKBBYTE0CRCERR |
+ INFINIPATH_HWE_HTCLNKBBYTE1CRCERR |
+ INFINIPATH_HWE_HTCMISCERR4 |
+ INFINIPATH_HWE_HTCMISCERR5 | INFINIPATH_HWE_HTCMISCERR6 |
+ INFINIPATH_HWE_HTCMISCERR7 |
+ INFINIPATH_HWE_HTCBUSTREQPARITYERR |
+ INFINIPATH_HWE_HTCBUSTRESPPARITYERR |
+ INFINIPATH_HWE_HTCBUSIREQPARITYERR |
+ INFINIPATH_HWE_RXDSYNCMEMPARITYERR |
+ INFINIPATH_HWE_MEMBISTFAILED |
+ INFINIPATH_HWE_COREPLL_FBSLIP |
+ INFINIPATH_HWE_COREPLL_RFSLIP |
+ INFINIPATH_HWE_HTBPLL_FBSLIP |
+ INFINIPATH_HWE_HTBPLL_RFSLIP |
+ INFINIPATH_HWE_HTAPLL_FBSLIP |
+ INFINIPATH_HWE_HTAPLL_RFSLIP |
+ INFINIPATH_HWE_SERDESPLLFAILED |
+ INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
+ INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
+
+ dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
+ dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
+ dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
+ dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
+
+ /*
+ * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
+ * 2 is Some Misc, 3 is reserved for future.
+ */
+ dd->ipath_eep_st_masks[0].hwerrs_to_log =
+ INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
+
+ dd->ipath_eep_st_masks[1].hwerrs_to_log =
+ INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
+
+ dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
+
+ dd->delay_mult = 2; /* SDR, 4X, can't change */
+
+ dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+ dd->ipath_link_speed_supported = IPATH_IB_SDR;
+ dd->ipath_link_width_enabled = IB_WIDTH_4X;
+ dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
+ /* these can't change for this chip, so set once */
+ dd->ipath_link_width_active = dd->ipath_link_width_enabled;
+ dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
+}
+
+/**
+ * ipath_ht_init_hwerrors - enable hardware errors
+ * @dd: the infinipath device
+ *
+ * now that we have finished initializing everything that might reasonably
+ * cause a hardware error, and cleared those errors bits as they occur,
+ * we can enable hardware errors in the mask (potentially enabling
+ * freeze mode), and enable hardware errors as errors (along with
+ * everything else) in errormask
+ */
+static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
+{
+ ipath_err_t val;
+ u64 extsval;
+
+ extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
+
+ if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
+ ipath_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & INFINIPATH_EXTS_MEMBIST_CORRECT)
+ ipath_dbg("MemBIST corrected\n");
+
+ ipath_check_htlink(dd);
+
+ /* barring bugs, all hwerrors become interrupts, which can */
+ val = -1LL;
+ /* don't look at crc lane1 if 8 bit */
+ if (dd->ipath_flags & IPATH_8BIT_IN_HT0)
+ val &= ~infinipath_hwe_htclnkabyte1crcerr;
+ /* don't look at crc lane1 if 8 bit */
+ if (dd->ipath_flags & IPATH_8BIT_IN_HT1)
+ val &= ~infinipath_hwe_htclnkbbyte1crcerr;
+
+ /*
+ * disable RXDSYNCMEMPARITY because external serdes is unused,
+ * and therefore the logic will never be used or initialized,
+ * and uninitialized state will normally result in this error
+ * being asserted. Similarly for the external serdess pll
+ * lock signal.
+ */
+ val &= ~(INFINIPATH_HWE_SERDESPLLFAILED |
+ INFINIPATH_HWE_RXDSYNCMEMPARITYERR);
+
+ /*
+ * Disable MISCERR4 because of an inversion in the HT core
+ * logic checking for errors that cause this bit to be set.
+ * The errata can also cause the protocol error bit to be set
+ * in the HT config space linkerror register(s).
+ */
+ val &= ~INFINIPATH_HWE_HTCMISCERR4;
+
+ /*
+ * PLL ignored because unused MDIO interface has a logic problem
+ */
+ if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
+ val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
+ dd->ipath_hwerrmask = val;
+}
+
+
+
+
+/**
+ * ipath_ht_bringup_serdes - bring up the serdes
+ * @dd: the infinipath device
+ */
+static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
+{
+ u64 val, config1;
+ int ret = 0, change = 0;
+
+ ipath_dbg("Trying to bringup serdes\n");
+
+ if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
+ INFINIPATH_HWE_SERDESPLLFAILED)
+ {
+ ipath_dbg("At start, serdes PLL failed bit set in "
+ "hwerrstatus, clearing and continuing\n");
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ INFINIPATH_HWE_SERDESPLLFAILED);
+ }
+
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
+ config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
+
+ ipath_cdbg(VERBOSE, "Initial serdes status is config0=%llx "
+ "config1=%llx, sstatus=%llx xgxs %llx\n",
+ (unsigned long long) val, (unsigned long long) config1,
+ (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
+ (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
+
+ /* force reset on */
+ val |= INFINIPATH_SERDC0_RESET_PLL
+ /* | INFINIPATH_SERDC0_RESET_MASK */
+ ;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
+ udelay(15); /* need pll reset set at least for a bit */
+
+ if (val & INFINIPATH_SERDC0_RESET_PLL) {
+ u64 val2 = val &= ~INFINIPATH_SERDC0_RESET_PLL;
+ /* set lane resets, and tx idle, during pll reset */
+ val2 |= INFINIPATH_SERDC0_RESET_MASK |
+ INFINIPATH_SERDC0_TXIDLE;
+ ipath_cdbg(VERBOSE, "Clearing serdes PLL reset (writing "
+ "%llx)\n", (unsigned long long) val2);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
+ val2);
+ /*
+ * be sure chip saw it
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ /*
+ * need pll reset clear at least 11 usec before lane
+ * resets cleared; give it a few more
+ */
+ udelay(15);
+ val = val2; /* for check below */
+ }
+
+ if (val & (INFINIPATH_SERDC0_RESET_PLL |
+ INFINIPATH_SERDC0_RESET_MASK |
+ INFINIPATH_SERDC0_TXIDLE)) {
+ val &= ~(INFINIPATH_SERDC0_RESET_PLL |
+ INFINIPATH_SERDC0_RESET_MASK |
+ INFINIPATH_SERDC0_TXIDLE);
+ /* clear them */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0,
+ val);
+ }
+
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ if (val & INFINIPATH_XGXS_RESET) {
+ /* normally true after boot */
+ val &= ~INFINIPATH_XGXS_RESET;
+ change = 1;
+ }
+ if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
+ INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
+ /* need to compensate for Tx inversion in partner */
+ val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
+ INFINIPATH_XGXS_RX_POL_SHIFT);
+ val |= dd->ipath_rx_pol_inv <<
+ INFINIPATH_XGXS_RX_POL_SHIFT;
+ change = 1;
+ }
+ if (change)
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
+
+ /* clear current and de-emphasis bits */
+ config1 &= ~0x0ffffffff00ULL;
+ /* set current to 20ma */
+ config1 |= 0x00000000000ULL;
+ /* set de-emphasis to -5.68dB */
+ config1 |= 0x0cccc000000ULL;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
+
+ ipath_cdbg(VERBOSE, "After setup: serdes status is config0=%llx "
+ "config1=%llx, sstatus=%llx xgxs %llx\n",
+ (unsigned long long) val, (unsigned long long) config1,
+ (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
+ (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
+
+ return ret; /* for now, say we always succeeded */
+}
+
+/**
+ * ipath_ht_quiet_serdes - set serdes to txidle
+ * @dd: the infinipath device
+ * driver is being unloaded
+ */
+static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
+{
+ u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
+
+ val |= INFINIPATH_SERDC0_TXIDLE;
+ ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
+ (unsigned long long) val);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
+}
+
+/**
+ * ipath_pe_put_tid - write a TID in chip
+ * @dd: the infinipath device
+ * @tidptr: pointer to the expected TID (in chip) to update
+ * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
+ * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
+ *
+ * This exists as a separate routine to allow for special locking etc.
+ * It's used for both the full cleanup on exit, as well as the normal
+ * setup and teardown.
+ */
+static void ipath_ht_put_tid(struct ipath_devdata *dd,
+ u64 __iomem *tidptr, u32 type,
+ unsigned long pa)
+{
+ if (!dd->ipath_kregbase)
+ return;
+
+ if (pa != dd->ipath_tidinvalid) {
+ if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
+ dev_info(&dd->pcidev->dev,
+ "physaddr %lx has more than "
+ "40 bits, using only 40!!!\n", pa);
+ pa &= INFINIPATH_RT_ADDR_MASK;
+ }
+ if (type == RCVHQ_RCV_TYPE_EAGER)
+ pa |= dd->ipath_tidtemplate;
+ else {
+ /* in words (fixed, full page). */
+ u64 lenvalid = PAGE_SIZE >> 2;
+ lenvalid <<= INFINIPATH_RT_BUFSIZE_SHIFT;
+ pa |= lenvalid | INFINIPATH_RT_VALID;
+ }
+ }
+
+ writeq(pa, tidptr);
+}
+
+
+/**
+ * ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
+ * @dd: the infinipath device
+ * @port: the port
+ *
+ * Used from ipath_close(), and at chip initialization.
+ */
+static void ipath_ht_clear_tids(struct ipath_devdata *dd, unsigned port)
+{
+ u64 __iomem *tidbase;
+ int i;
+
+ if (!dd->ipath_kregbase)
+ return;
+
+ ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
+
+ /*
+ * need to invalidate all of the expected TID entries for this
+ * port, so we don't have valid entries that might somehow get
+ * used (early in next use of this port, or through some bug)
+ */
+ tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
+ dd->ipath_rcvtidbase +
+ port * dd->ipath_rcvtidcnt *
+ sizeof(*tidbase));
+ for (i = 0; i < dd->ipath_rcvtidcnt; i++)
+ ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+ dd->ipath_tidinvalid);
+
+ tidbase = (u64 __iomem *) ((char __iomem *)(dd->ipath_kregbase) +
+ dd->ipath_rcvegrbase +
+ port * dd->ipath_rcvegrcnt *
+ sizeof(*tidbase));
+
+ for (i = 0; i < dd->ipath_rcvegrcnt; i++)
+ ipath_ht_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+ dd->ipath_tidinvalid);
+}
+
+/**
+ * ipath_ht_tidtemplate - setup constants for TID updates
+ * @dd: the infinipath device
+ *
+ * We setup stuff that we use a lot, to avoid calculating each time
+ */
+static void ipath_ht_tidtemplate(struct ipath_devdata *dd)
+{
+ dd->ipath_tidtemplate = dd->ipath_ibmaxlen >> 2;
+ dd->ipath_tidtemplate <<= INFINIPATH_RT_BUFSIZE_SHIFT;
+ dd->ipath_tidtemplate |= INFINIPATH_RT_VALID;
+
+ /*
+ * work around chip errata bug 7358, by marking invalid tids
+ * as having max length
+ */
+ dd->ipath_tidinvalid = (-1LL & INFINIPATH_RT_BUFSIZE_MASK) <<
+ INFINIPATH_RT_BUFSIZE_SHIFT;
+}
+
+static int ipath_ht_early_init(struct ipath_devdata *dd)
+{
+ u32 __iomem *piobuf;
+ u32 pioincr, val32;
+ int i;
+
+ /*
+ * one cache line; long IB headers will spill over into received
+ * buffer
+ */
+ dd->ipath_rcvhdrentsize = 16;
+ dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
+
+ /*
+ * For HT, we allocate a somewhat overly large eager buffer,
+ * such that we can guarantee that we can receive the largest
+ * packet that we can send out. To truly support a 4KB MTU,
+ * we need to bump this to a large value. To date, other than
+ * testing, we have never encountered an HCA that can really
+ * send 4KB MTU packets, so we do not handle that (we'll get
+ * errors interrupts if we ever see one).
+ */
+ dd->ipath_rcvegrbufsize = dd->ipath_piosize2k;
+
+ /*
+ * the min() check here is currently a nop, but it may not
+ * always be, depending on just how we do ipath_rcvegrbufsize
+ */
+ dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
+ dd->ipath_rcvegrbufsize);
+ dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
+ ipath_ht_tidtemplate(dd);
+
+ /*
+ * zero all the TID entries at startup. We do this for sanity,
+ * in case of a previous driver crash of some kind, and also
+ * because the chip powers up with these memories in an unknown
+ * state. Use portcnt, not cfgports, since this is for the
+ * full chip, not for current (possibly different) configuration
+ * value.
+ * Chip Errata bug 6447
+ */
+ for (val32 = 0; val32 < dd->ipath_portcnt; val32++)
+ ipath_ht_clear_tids(dd, val32);
+
+ /*
+ * write the pbc of each buffer, to be sure it's initialized, then
+ * cancel all the buffers, and also abort any packets that might
+ * have been in flight for some reason (the latter is for driver
+ * unload/reload, but isn't a bad idea at first init). PIO send
+ * isn't enabled at this point, so there is no danger of sending
+ * these out on the wire.
+ * Chip Errata bug 6610
+ */
+ piobuf = (u32 __iomem *) (((char __iomem *)(dd->ipath_kregbase)) +
+ dd->ipath_piobufbase);
+ pioincr = dd->ipath_palign / sizeof(*piobuf);
+ for (i = 0; i < dd->ipath_piobcnt2k; i++) {
+ /*
+ * reasonable word count, just to init pbc
+ */
+ writel(16, piobuf);
+ piobuf += pioincr;
+ }
+
+ ipath_get_eeprom_info(dd);
+ if (dd->ipath_boardrev == 5) {
+ /*
+ * Later production QHT7040 has same changes as QHT7140, so
+ * can use GPIO interrupts. They have serial #'s starting
+ * with 128, rather than 112.
+ */
+ if (dd->ipath_serial[0] == '1' &&
+ dd->ipath_serial[1] == '2' &&
+ dd->ipath_serial[2] == '8')
+ dd->ipath_flags |= IPATH_GPIO_INTR;
+ else {
+ ipath_dev_err(dd, "Unsupported InfiniPath board "
+ "(serial number %.16s)!\n",
+ dd->ipath_serial);
+ return 1;
+ }
+ }
+
+ if (dd->ipath_minrev >= 4) {
+ /* Rev4+ reports extra errors via internal GPIO pins */
+ dd->ipath_flags |= IPATH_GPIO_ERRINTRS;
+ dd->ipath_gpio_mask |= IPATH_GPIO_ERRINTR_MASK;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
+ dd->ipath_gpio_mask);
+ }
+
+ return 0;
+}
+
+
+/**
+ * ipath_init_ht_get_base_info - set chip-specific flags for user code
+ * @dd: the infinipath device
+ * @kbase: ipath_base_info pointer
+ *
+ * We set the PCIE flag because the lower bandwidth on PCIe vs
+ * HyperTransport can affect some user packet algorithms.
+ */
+static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase)
+{
+ struct ipath_base_info *kinfo = kbase;
+
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_HT |
+ IPATH_RUNTIME_PIO_REGSWAPPED;
+
+ if (pd->port_dd->ipath_minrev < 4)
+ kinfo->spi_runtime_flags |= IPATH_RUNTIME_RCVHDR_COPY;
+
+ return 0;
+}
+
+static void ipath_ht_free_irq(struct ipath_devdata *dd)
+{
+ free_irq(dd->ipath_irq, dd);
+ ht_destroy_irq(dd->ipath_irq);
+ dd->ipath_irq = 0;
+ dd->ipath_intconfig = 0;
+}
+
+static struct ipath_message_header *
+ipath_ht_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
+{
+ return (struct ipath_message_header *)
+ &rhf_addr[sizeof(u64) / sizeof(u32)];
+}
+
+static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports)
+{
+ dd->ipath_portcnt =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
+ dd->ipath_p0_rcvegrcnt =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
+}
+
+static void ipath_ht_read_counters(struct ipath_devdata *dd,
+ struct infinipath_counters *cntrs)
+{
+ cntrs->LBIntCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt));
+ cntrs->LBFlowStallCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt));
+ cntrs->TxSDmaDescCnt = 0;
+ cntrs->TxUnsupVLErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt));
+ cntrs->TxDataPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt));
+ cntrs->TxFlowPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt));
+ cntrs->TxDwordCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt));
+ cntrs->TxLenErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt));
+ cntrs->TxMaxMinLenErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt));
+ cntrs->TxUnderrunCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt));
+ cntrs->TxFlowStallCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt));
+ cntrs->TxDroppedPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt));
+ cntrs->RxDroppedPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt));
+ cntrs->RxDataPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt));
+ cntrs->RxFlowPktCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt));
+ cntrs->RxDwordCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt));
+ cntrs->RxLenErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt));
+ cntrs->RxMaxMinLenErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt));
+ cntrs->RxICRCErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt));
+ cntrs->RxVCRCErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt));
+ cntrs->RxFlowCtrlErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt));
+ cntrs->RxBadFormatCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt));
+ cntrs->RxLinkProblemCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt));
+ cntrs->RxEBPCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt));
+ cntrs->RxLPCRCErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt));
+ cntrs->RxBufOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt));
+ cntrs->RxTIDFullErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt));
+ cntrs->RxTIDValidErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt));
+ cntrs->RxPKeyMismatchCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt));
+ cntrs->RxP0HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt));
+ cntrs->RxP1HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt));
+ cntrs->RxP2HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt));
+ cntrs->RxP3HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt));
+ cntrs->RxP4HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt));
+ cntrs->RxP5HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP5HdrEgrOvflCnt));
+ cntrs->RxP6HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP6HdrEgrOvflCnt));
+ cntrs->RxP7HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP7HdrEgrOvflCnt));
+ cntrs->RxP8HdrEgrOvflCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP8HdrEgrOvflCnt));
+ cntrs->RxP9HdrEgrOvflCnt = 0;
+ cntrs->RxP10HdrEgrOvflCnt = 0;
+ cntrs->RxP11HdrEgrOvflCnt = 0;
+ cntrs->RxP12HdrEgrOvflCnt = 0;
+ cntrs->RxP13HdrEgrOvflCnt = 0;
+ cntrs->RxP14HdrEgrOvflCnt = 0;
+ cntrs->RxP15HdrEgrOvflCnt = 0;
+ cntrs->RxP16HdrEgrOvflCnt = 0;
+ cntrs->IBStatusChangeCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt));
+ cntrs->IBLinkErrRecoveryCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt));
+ cntrs->IBLinkDownedCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt));
+ cntrs->IBSymbolErrCnt =
+ ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt));
+ cntrs->RxVL15DroppedPktCnt = 0;
+ cntrs->RxOtherLocalPhyErrCnt = 0;
+ cntrs->PcieRetryBufDiagQwordCnt = 0;
+ cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs;
+ cntrs->LocalLinkIntegrityErrCnt =
+ (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
+ dd->ipath_lli_errs : dd->ipath_lli_errors;
+ cntrs->RxVlErrCnt = 0;
+ cntrs->RxDlidFltrCnt = 0;
+}
+
+
+/* no interrupt fallback for these chips */
+static int ipath_ht_nointr_fallback(struct ipath_devdata *dd)
+{
+ return 0;
+}
+
+
+/*
+ * reset the XGXS (between serdes and IBC). Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining. To do this right, we reset IBC
+ * as well.
+ */
+static void ipath_ht_xgxs_reset(struct ipath_devdata *dd)
+{
+ u64 val, prev_val;
+
+ prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val = prev_val | INFINIPATH_XGXS_RESET;
+ prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+}
+
+
+static int ipath_ht_get_ib_cfg(struct ipath_devdata *dd, int which)
+{
+ int ret;
+
+ switch (which) {
+ case IPATH_IB_CFG_LWID:
+ ret = dd->ipath_link_width_active;
+ break;
+ case IPATH_IB_CFG_SPD:
+ ret = dd->ipath_link_speed_active;
+ break;
+ case IPATH_IB_CFG_LWID_ENB:
+ ret = dd->ipath_link_width_enabled;
+ break;
+ case IPATH_IB_CFG_SPD_ENB:
+ ret = dd->ipath_link_speed_enabled;
+ break;
+ default:
+ ret = -ENOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+
+/* we assume range checking is already done, if needed */
+static int ipath_ht_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
+{
+ int ret = 0;
+
+ if (which == IPATH_IB_CFG_LWID_ENB)
+ dd->ipath_link_width_enabled = val;
+ else if (which == IPATH_IB_CFG_SPD_ENB)
+ dd->ipath_link_speed_enabled = val;
+ else
+ ret = -ENOTSUPP;
+ return ret;
+}
+
+
+static void ipath_ht_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
+{
+}
+
+
+static int ipath_ht_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
+{
+ ipath_setup_ht_setextled(dd, ipath_ib_linkstate(dd, ibcs),
+ ipath_ib_linktrstate(dd, ibcs));
+ return 0;
+}
+
+
+/**
+ * ipath_init_iba6110_funcs - set up the chip-specific function pointers
+ * @dd: the infinipath device
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ */
+void ipath_init_iba6110_funcs(struct ipath_devdata *dd)
+{
+ dd->ipath_f_intrsetup = ipath_ht_intconfig;
+ dd->ipath_f_bus = ipath_setup_ht_config;
+ dd->ipath_f_reset = ipath_setup_ht_reset;
+ dd->ipath_f_get_boardname = ipath_ht_boardname;
+ dd->ipath_f_init_hwerrors = ipath_ht_init_hwerrors;
+ dd->ipath_f_early_init = ipath_ht_early_init;
+ dd->ipath_f_handle_hwerrors = ipath_ht_handle_hwerrors;
+ dd->ipath_f_quiet_serdes = ipath_ht_quiet_serdes;
+ dd->ipath_f_bringup_serdes = ipath_ht_bringup_serdes;
+ dd->ipath_f_clear_tids = ipath_ht_clear_tids;
+ dd->ipath_f_put_tid = ipath_ht_put_tid;
+ dd->ipath_f_cleanup = ipath_setup_ht_cleanup;
+ dd->ipath_f_setextled = ipath_setup_ht_setextled;
+ dd->ipath_f_get_base_info = ipath_ht_get_base_info;
+ dd->ipath_f_free_irq = ipath_ht_free_irq;
+ dd->ipath_f_tidtemplate = ipath_ht_tidtemplate;
+ dd->ipath_f_intr_fallback = ipath_ht_nointr_fallback;
+ dd->ipath_f_get_msgheader = ipath_ht_get_msgheader;
+ dd->ipath_f_config_ports = ipath_ht_config_ports;
+ dd->ipath_f_read_counters = ipath_ht_read_counters;
+ dd->ipath_f_xgxs_reset = ipath_ht_xgxs_reset;
+ dd->ipath_f_get_ib_cfg = ipath_ht_get_ib_cfg;
+ dd->ipath_f_set_ib_cfg = ipath_ht_set_ib_cfg;
+ dd->ipath_f_config_jint = ipath_ht_config_jint;
+ dd->ipath_f_ib_updown = ipath_ht_ib_updown;
+
+ /*
+ * initialize chip-specific variables
+ */
+ ipath_init_ht_variables(dd);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_kernel.h"
+#include "ipath_common.h"
+
+/*
+ * min buffers we want to have per port, after driver
+ */
+#define IPATH_MIN_USER_PORT_BUFCNT 7
+
+/*
+ * Number of ports we are configured to use (to allow for more pio
+ * buffers per port, etc.) Zero means use chip value.
+ */
+static ushort ipath_cfgports;
+
+module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
+MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
+
+/*
+ * Number of buffers reserved for driver (verbs and layered drivers.)
+ * Initialized based on number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types.
+ */
+static ushort ipath_kpiobufs;
+
+static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
+
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
+ &ipath_kpiobufs, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
+
+/**
+ * create_port0_egr - allocate the eager TID buffers
+ * @dd: the infinipath device
+ *
+ * This code is now quite different for user and kernel, because
+ * the kernel uses skb's, for the accelerated network performance.
+ * This is the kernel (port0) version.
+ *
+ * Allocate the eager TID buffers and program them into infinipath.
+ * We use the network layer alloc_skb() allocator to allocate the
+ * memory, and either use the buffers as is for things like verbs
+ * packets, or pass the buffers up to the ipath layered driver and
+ * thence the network layer, replacing them as we do so (see
+ * ipath_rcv_layer()).
+ */
+static int create_port0_egr(struct ipath_devdata *dd)
+{
+ unsigned e, egrcnt;
+ struct ipath_skbinfo *skbinfo;
+ int ret;
+
+ egrcnt = dd->ipath_p0_rcvegrcnt;
+
+ skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
+ if (skbinfo == NULL) {
+ ipath_dev_err(dd, "allocation error for eager TID "
+ "skb array\n");
+ ret = -ENOMEM;
+ goto bail;
+ }
+ for (e = 0; e < egrcnt; e++) {
+ /*
+ * This is a bit tricky in that we allocate extra
+ * space for 2 bytes of the 14 byte ethernet header.
+ * These two bytes are passed in the ipath header so
+ * the rest of the data is word aligned. We allocate
+ * 4 bytes so that the data buffer stays word aligned.
+ * See ipath_kreceive() for more details.
+ */
+ skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
+ if (!skbinfo[e].skb) {
+ ipath_dev_err(dd, "SKB allocation error for "
+ "eager TID %u\n", e);
+ while (e != 0)
+ dev_kfree_skb(skbinfo[--e].skb);
+ vfree(skbinfo);
+ ret = -ENOMEM;
+ goto bail;
+ }
+ }
+ /*
+ * After loop above, so we can test non-NULL to see if ready
+ * to use at receive, etc.
+ */
+ dd->ipath_port0_skbinfo = skbinfo;
+
+ for (e = 0; e < egrcnt; e++) {
+ dd->ipath_port0_skbinfo[e].phys =
+ ipath_map_single(dd->pcidev,
+ dd->ipath_port0_skbinfo[e].skb->data,
+ dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
+ dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
+ ((char __iomem *) dd->ipath_kregbase +
+ dd->ipath_rcvegrbase),
+ RCVHQ_RCV_TYPE_EAGER,
+ dd->ipath_port0_skbinfo[e].phys);
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+static int bringup_link(struct ipath_devdata *dd)
+{
+ u64 val, ibc;
+ int ret = 0;
+
+ /* hold IBC in reset */
+ dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+
+ /*
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
+ */
+ val = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc = val << dd->ibcc_mpl_shift;
+
+ /* flowcontrolwatermark is in units of KBytes */
+ ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
+ /*
+ * How often flowctrl sent. More or less in usecs; balance against
+ * watermark value, so that in theory senders always get a flow
+ * control update in time to not let the IB link go idle.
+ */
+ ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
+ /* max error tolerance */
+ ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
+ /* use "real" buffer space for */
+ ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
+ /* IB credit flow control. */
+ ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
+ /* initially come up waiting for TS1, without sending anything. */
+ dd->ipath_ibcctrl = ibc;
+ /*
+ * Want to start out with both LINKCMD and LINKINITCMD in NOP
+ * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
+ * to stay a NOP. Flag that we are disabled, for the (unlikely)
+ * case that some recovery path is trying to bring the link up
+ * before we are ready.
+ */
+ ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
+ ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
+ (unsigned long long) ibc);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
+
+ // be sure chip saw it
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+
+ ret = dd->ipath_f_bringup_serdes(dd);
+
+ if (ret)
+ dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
+ "not usable\n");
+ else {
+ /* enable IBC */
+ dd->ipath_control |= INFINIPATH_C_LINKENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+ }
+
+ return ret;
+}
+
+static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
+{
+ struct ipath_portdata *pd = NULL;
+
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (pd) {
+ pd->port_dd = dd;
+ pd->port_cnt = 1;
+ /* The port 0 pkey table is used by the layer interface. */
+ pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
+ pd->port_seq_cnt = 1;
+ }
+ return pd;
+}
+
+static int init_chip_first(struct ipath_devdata *dd)
+{
+ struct ipath_portdata *pd;
+ int ret = 0;
+ u64 val;
+
+ spin_lock_init(&dd->ipath_kernel_tid_lock);
+ spin_lock_init(&dd->ipath_user_tid_lock);
+ spin_lock_init(&dd->ipath_sendctrl_lock);
+ spin_lock_init(&dd->ipath_uctxt_lock);
+ spin_lock_init(&dd->ipath_sdma_lock);
+ spin_lock_init(&dd->ipath_gpio_lock);
+ spin_lock_init(&dd->ipath_eep_st_lock);
+ spin_lock_init(&dd->ipath_sdepb_lock);
+ mutex_init(&dd->ipath_eep_lock);
+
+ /*
+ * skip cfgports stuff because we are not allocating memory,
+ * and we don't want problems if the portcnt changed due to
+ * cfgports. We do still check and report a difference, if
+ * not same (should be impossible).
+ */
+ dd->ipath_f_config_ports(dd, ipath_cfgports);
+ if (!ipath_cfgports)
+ dd->ipath_cfgports = dd->ipath_portcnt;
+ else if (ipath_cfgports <= dd->ipath_portcnt) {
+ dd->ipath_cfgports = ipath_cfgports;
+ ipath_dbg("Configured to use %u ports out of %u in chip\n",
+ dd->ipath_cfgports, ipath_read_kreg32(dd,
+ dd->ipath_kregs->kr_portcnt));
+ } else {
+ dd->ipath_cfgports = dd->ipath_portcnt;
+ ipath_dbg("Tried to configured to use %u ports; chip "
+ "only supports %u\n", ipath_cfgports,
+ ipath_read_kreg32(dd,
+ dd->ipath_kregs->kr_portcnt));
+ }
+ /*
+ * Allocate full portcnt array, rather than just cfgports, because
+ * cleanup iterates across all possible ports.
+ */
+ dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
+ GFP_KERNEL);
+
+ if (!dd->ipath_pd) {
+ ipath_dev_err(dd, "Unable to allocate portdata array, "
+ "failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ pd = create_portdata0(dd);
+ if (!pd) {
+ ipath_dev_err(dd, "Unable to allocate portdata for port "
+ "0, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ dd->ipath_pd[0] = pd;
+
+ dd->ipath_rcvtidcnt =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
+ dd->ipath_rcvtidbase =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
+ dd->ipath_rcvegrcnt =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
+ dd->ipath_rcvegrbase =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
+ dd->ipath_palign =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
+ dd->ipath_piobufbase =
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
+ dd->ipath_piosize2k = val & ~0U;
+ dd->ipath_piosize4k = val >> 32;
+ if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
+ ipath_mtu4096 = 0; /* 4KB not supported by this chip */
+ dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
+ dd->ipath_piobcnt2k = val & ~0U;
+ dd->ipath_piobcnt4k = val >> 32;
+ dd->ipath_pio2kbase =
+ (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
+ (dd->ipath_piobufbase & 0xffffffff));
+ if (dd->ipath_piobcnt4k) {
+ dd->ipath_pio4kbase = (u32 __iomem *)
+ (((char __iomem *) dd->ipath_kregbase) +
+ (dd->ipath_piobufbase >> 32));
+ /*
+ * 4K buffers take 2 pages; we use roundup just to be
+ * paranoid; we calculate it once here, rather than on
+ * ever buf allocate
+ */
+ dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
+ dd->ipath_palign);
+ ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
+ "(%x aligned)\n",
+ dd->ipath_piobcnt2k, dd->ipath_piosize2k,
+ dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
+ dd->ipath_piosize4k, dd->ipath_pio4kbase,
+ dd->ipath_4kalign);
+ }
+ else ipath_dbg("%u 2k piobufs @ %p\n",
+ dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
+
+done:
+ return ret;
+}
+
+/**
+ * init_chip_reset - re-initialize after a reset, or enable
+ * @dd: the infinipath device
+ *
+ * sanity check at least some of the values after reset, and
+ * ensure no receive or transmit (explicitly, in case reset
+ * failed
+ */
+static int init_chip_reset(struct ipath_devdata *dd)
+{
+ u32 rtmp;
+ int i;
+ unsigned long flags;
+
+ /*
+ * ensure chip does no sends or receives, tail updates, or
+ * pioavail updates while we re-initialize
+ */
+ dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
+ for (i = 0; i < dd->ipath_portcnt; i++) {
+ clear_bit(dd->ipath_r_portenable_shift + i,
+ &dd->ipath_rcvctrl);
+ clear_bit(dd->ipath_r_intravail_shift + i,
+ &dd->ipath_rcvctrl);
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl = 0U; /* no sdma, etc */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
+
+ rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
+ if (rtmp != dd->ipath_rcvtidcnt)
+ dev_info(&dd->pcidev->dev, "tidcnt was %u before "
+ "reset, now %u, using original\n",
+ dd->ipath_rcvtidcnt, rtmp);
+ rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
+ if (rtmp != dd->ipath_rcvtidbase)
+ dev_info(&dd->pcidev->dev, "tidbase was %u before "
+ "reset, now %u, using original\n",
+ dd->ipath_rcvtidbase, rtmp);
+ rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
+ if (rtmp != dd->ipath_rcvegrcnt)
+ dev_info(&dd->pcidev->dev, "egrcnt was %u before "
+ "reset, now %u, using original\n",
+ dd->ipath_rcvegrcnt, rtmp);
+ rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
+ if (rtmp != dd->ipath_rcvegrbase)
+ dev_info(&dd->pcidev->dev, "egrbase was %u before "
+ "reset, now %u, using original\n",
+ dd->ipath_rcvegrbase, rtmp);
+
+ return 0;
+}
+
+static int init_pioavailregs(struct ipath_devdata *dd)
+{
+ int ret;
+
+ dd->ipath_pioavailregs_dma = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
+ GFP_KERNEL);
+ if (!dd->ipath_pioavailregs_dma) {
+ ipath_dev_err(dd, "failed to allocate PIOavail reg area "
+ "in memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ /*
+ * we really want L2 cache aligned, but for current CPUs of
+ * interest, they are the same.
+ */
+ dd->ipath_statusp = (u64 *)
+ ((char *)dd->ipath_pioavailregs_dma +
+ ((2 * L1_CACHE_BYTES +
+ dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
+ /* copy the current value now that it's really allocated */
+ *dd->ipath_statusp = dd->_ipath_status;
+ /*
+ * setup buffer to hold freeze msg, accessible to apps,
+ * following statusp
+ */
+ dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
+ /* and its length */
+ dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
+
+ ret = 0;
+
+done:
+ return ret;
+}
+
+/**
+ * init_shadow_tids - allocate the shadow TID array
+ * @dd: the infinipath device
+ *
+ * allocate the shadow TID array, so we can ipath_munlock previous
+ * entries. It may make more sense to move the pageshadow to the
+ * port data structure, so we only allocate memory for ports actually
+ * in use, since we at 8k per port, now.
+ */
+static void init_shadow_tids(struct ipath_devdata *dd)
+{
+ struct page **pages;
+ dma_addr_t *addrs;
+
+ pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
+ sizeof(struct page *));
+ if (!pages) {
+ ipath_dev_err(dd, "failed to allocate shadow page * "
+ "array, no expected sends!\n");
+ dd->ipath_pageshadow = NULL;
+ return;
+ }
+
+ addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
+ sizeof(dma_addr_t));
+ if (!addrs) {
+ ipath_dev_err(dd, "failed to allocate shadow dma handle "
+ "array, no expected sends!\n");
+ vfree(pages);
+ dd->ipath_pageshadow = NULL;
+ return;
+ }
+
+ dd->ipath_pageshadow = pages;
+ dd->ipath_physshadow = addrs;
+}
+
+static void enable_chip(struct ipath_devdata *dd, int reinit)
+{
+ u32 val;
+ u64 rcvmask;
+ unsigned long flags;
+ int i;
+
+ if (!reinit)
+ init_waitqueue_head(&ipath_state_wait);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ /* Enable PIO send, and update of PIOavail regs to memory. */
+ dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
+ INFINIPATH_S_PIOBUFAVAILUPD;
+
+ /*
+ * Set the PIO avail update threshold to host memory
+ * on chips that support it.
+ */
+ if (dd->ipath_pioupd_thresh)
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /*
+ * Enable kernel ports' receive and receive interrupt.
+ * Other ports done as user opens and inits them.
+ */
+ rcvmask = 1ULL;
+ dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
+ (rcvmask << dd->ipath_r_intravail_shift);
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
+ dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ /*
+ * now ready for use. this should be cleared whenever we
+ * detect a reset, or initiate one.
+ */
+ dd->ipath_flags |= IPATH_INITTED;
+
+ /*
+ * Init our shadow copies of head from tail values,
+ * and write head values to match.
+ */
+ val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
+ ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
+
+ /* Initialize so we interrupt on next packet received */
+ ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off |
+ dd->ipath_pd[0]->port_head, 0);
+
+ /*
+ * by now pioavail updates to memory should have occurred, so
+ * copy them into our working/shadow registers; this is in
+ * case something went wrong with abort, but mostly to get the
+ * initial values of the generation bit correct.
+ */
+ for (i = 0; i < dd->ipath_pioavregs; i++) {
+ __le64 pioavail;
+
+ /*
+ * Chip Errata bug 6641; even and odd qwords>3 are swapped.
+ */
+ if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
+ pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
+ else
+ pioavail = dd->ipath_pioavailregs_dma[i];
+ /*
+ * don't need to worry about ipath_pioavailkernel here
+ * because we will call ipath_chg_pioavailkernel() later
+ * in initialization, to busy out buffers as needed
+ */
+ dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
+ }
+ /* can get counters, stats, etc. */
+ dd->ipath_flags |= IPATH_PRESENT;
+}
+
+static int init_housekeeping(struct ipath_devdata *dd, int reinit)
+{
+ char boardn[40];
+ int ret = 0;
+
+ /*
+ * have to clear shadow copies of registers at init that are
+ * not otherwise set here, or all kinds of bizarre things
+ * happen with driver on chip reset
+ */
+ dd->ipath_rcvhdrsize = 0;
+
+ /*
+ * Don't clear ipath_flags as 8bit mode was set before
+ * entering this func. However, we do set the linkstate to
+ * unknown, so we can watch for a transition.
+ * PRESENT is set because we want register reads to work,
+ * and the kernel infrastructure saw it in config space;
+ * We clear it if we have failures.
+ */
+ dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
+ dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
+ IPATH_LINKDOWN | IPATH_LINKINIT);
+
+ ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
+ dd->ipath_revision =
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
+
+ /*
+ * set up fundamental info we need to use the chip; we assume
+ * if the revision reg and these regs are OK, we don't need to
+ * special case the rest
+ */
+ dd->ipath_sregbase =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
+ dd->ipath_cregbase =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
+ dd->ipath_uregbase =
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
+ ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
+ "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
+ dd->ipath_uregbase, dd->ipath_cregbase);
+ if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
+ || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
+ || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
+ || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
+ ipath_dev_err(dd, "Register read failures from chip, "
+ "giving up initialization\n");
+ dd->ipath_flags &= ~IPATH_PRESENT;
+ ret = -ENODEV;
+ goto done;
+ }
+
+
+ /* clear diagctrl register, in case diags were running and crashed */
+ ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
+
+ /* clear the initial reset flag, in case first driver load */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
+ INFINIPATH_E_RESET);
+
+ ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
+ (unsigned long long) dd->ipath_revision,
+ dd->ipath_pcirev);
+
+ if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
+ INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
+ ipath_dev_err(dd, "Driver only handles version %d, "
+ "chip swversion is %d (%llx), failng\n",
+ IPATH_CHIP_SWVERSION,
+ (int)(dd->ipath_revision >>
+ INFINIPATH_R_SOFTWARE_SHIFT) &
+ INFINIPATH_R_SOFTWARE_MASK,
+ (unsigned long long) dd->ipath_revision);
+ ret = -ENOSYS;
+ goto done;
+ }
+ dd->ipath_majrev = (u8) ((dd->ipath_revision >>
+ INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
+ INFINIPATH_R_CHIPREVMAJOR_MASK);
+ dd->ipath_minrev = (u8) ((dd->ipath_revision >>
+ INFINIPATH_R_CHIPREVMINOR_SHIFT) &
+ INFINIPATH_R_CHIPREVMINOR_MASK);
+ dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
+ INFINIPATH_R_BOARDID_SHIFT) &
+ INFINIPATH_R_BOARDID_MASK);
+
+ ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
+
+ snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
+ "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
+ "SW Compat %u\n",
+ IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
+ (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
+ INFINIPATH_R_ARCH_MASK,
+ dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
+ (unsigned)(dd->ipath_revision >>
+ INFINIPATH_R_SOFTWARE_SHIFT) &
+ INFINIPATH_R_SOFTWARE_MASK);
+
+ ipath_dbg("%s", dd->ipath_boardversion);
+
+ if (ret)
+ goto done;
+
+ if (reinit)
+ ret = init_chip_reset(dd);
+ else
+ ret = init_chip_first(dd);
+
+done:
+ return ret;
+}
+
+static void verify_interrupt(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+
+ if (!dd)
+ return; /* being torn down */
+
+ /*
+ * If we don't have any interrupts, let the user know and
+ * don't bother checking again.
+ */
+ if (dd->ipath_int_counter == 0) {
+ if (!dd->ipath_f_intr_fallback(dd))
+ dev_err(&dd->pcidev->dev, "No interrupts detected, "
+ "not usable.\n");
+ else /* re-arm the timer to see if fallback works */
+ mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
+ } else
+ ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
+ dd->ipath_int_counter);
+}
+
+/**
+ * ipath_init_chip - do the actual initialization sequence on the chip
+ * @dd: the infinipath device
+ * @reinit: reinitializing, so don't allocate new memory
+ *
+ * Do the actual initialization sequence on the chip. This is done
+ * both from the init routine called from the PCI infrastructure, and
+ * when we reset the chip, or detect that it was reset internally,
+ * or it's administratively re-enabled.
+ *
+ * Memory allocation here and in called routines is only done in
+ * the first case (reinit == 0). We have to be careful, because even
+ * without memory allocation, we need to re-write all the chip registers
+ * TIDs, etc. after the reset or enable has completed.
+ */
+int ipath_init_chip(struct ipath_devdata *dd, int reinit)
+{
+ int ret = 0;
+ u32 kpiobufs, defkbufs;
+ u32 piobufs, uports;
+ u64 val;
+ struct ipath_portdata *pd;
+ gfp_t gfp_flags = GFP_USER | __GFP_COMP;
+
+ ret = init_housekeeping(dd, reinit);
+ if (ret)
+ goto done;
+
+ /*
+ * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
+ * but then it no longer nicely fits power of two, and since
+ * we now use routines that backend onto __get_free_pages, the
+ * rest would be wasted.
+ */
+ dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
+ dd->ipath_rcvhdrcnt);
+
+ /*
+ * Set up the shadow copies of the piobufavail registers,
+ * which we compare against the chip registers for now, and
+ * the in memory DMA'ed copies of the registers. This has to
+ * be done early, before we calculate lastport, etc.
+ */
+ piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ /*
+ * calc number of pioavail registers, and save it; we have 2
+ * bits per buffer.
+ */
+ dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
+ / (sizeof(u64) * BITS_PER_BYTE / 2);
+ uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
+ if (piobufs > 144)
+ defkbufs = 32 + dd->ipath_pioreserved;
+ else
+ defkbufs = 16 + dd->ipath_pioreserved;
+
+ if (ipath_kpiobufs && (ipath_kpiobufs +
+ (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
+ int i = (int) piobufs -
+ (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
+ if (i < 1)
+ i = 1;
+ dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
+ "%d for kernel leaves too few for %d user ports "
+ "(%d each); using %u\n", ipath_kpiobufs,
+ piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
+ /*
+ * shouldn't change ipath_kpiobufs, because could be
+ * different for different devices...
+ */
+ kpiobufs = i;
+ } else if (ipath_kpiobufs)
+ kpiobufs = ipath_kpiobufs;
+ else
+ kpiobufs = defkbufs;
+ dd->ipath_lastport_piobuf = piobufs - kpiobufs;
+ dd->ipath_pbufsport =
+ uports ? dd->ipath_lastport_piobuf / uports : 0;
+ /* if not an even divisor, some user ports get extra buffers */
+ dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
+ (dd->ipath_pbufsport * uports);
+ if (dd->ipath_ports_extrabuf)
+ ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
+ "ports <= %u\n", dd->ipath_pbufsport,
+ dd->ipath_ports_extrabuf);
+ dd->ipath_lastpioindex = 0;
+ dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
+ /* ipath_pioavailshadow initialized earlier */
+ ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
+ "each for %u user ports\n", kpiobufs,
+ piobufs, dd->ipath_pbufsport, uports);
+ ret = dd->ipath_f_early_init(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Early initialization failure\n");
+ goto done;
+ }
+
+ /*
+ * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
+ * done after early_init.
+ */
+ dd->ipath_hdrqlast =
+ dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
+ dd->ipath_rcvhdrentsize);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
+ dd->ipath_rcvhdrsize);
+
+ if (!reinit) {
+ ret = init_pioavailregs(dd);
+ init_shadow_tids(dd);
+ if (ret)
+ goto done;
+ }
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
+ dd->ipath_pioavailregs_phys);
+
+ /*
+ * this is to detect s/w errors, which the h/w works around by
+ * ignoring the low 6 bits of address, if it wasn't aligned.
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
+ if (val != dd->ipath_pioavailregs_phys) {
+ ipath_dev_err(dd, "Catastrophic software error, "
+ "SendPIOAvailAddr written as %lx, "
+ "read back as %llx\n",
+ (unsigned long) dd->ipath_pioavailregs_phys,
+ (unsigned long long) val);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
+
+ /*
+ * make sure we are not in freeze, and PIO send enabled, so
+ * writes to pbc happen
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
+
+ /*
+ * before error clears, since we expect serdes pll errors during
+ * this, the first time after reset
+ */
+ if (bringup_link(dd)) {
+ dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
+ ret = -ENETDOWN;
+ goto done;
+ }
+
+ /*
+ * clear any "expected" hwerrs from reset and/or initialization
+ * clear any that aren't enabled (at least this once), and then
+ * set the enable mask
+ */
+ dd->ipath_f_init_hwerrors(dd);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+
+ /* clear all */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
+ /* enable errors that are masked, at least this first time. */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ ~dd->ipath_maskederrs);
+ dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
+ dd->ipath_errormask =
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
+ /* clear any interrupts up to this point (ints still not enabled) */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
+
+ dd->ipath_f_tidtemplate(dd);
+
+ /*
+ * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
+ * re-init, the simplest way to handle this is to free
+ * existing, and re-allocate.
+ * Need to re-create rest of port 0 portdata as well.
+ */
+ pd = dd->ipath_pd[0];
+ if (reinit) {
+ struct ipath_portdata *npd;
+
+ /*
+ * Alloc and init new ipath_portdata for port0,
+ * Then free old pd. Could lead to fragmentation, but also
+ * makes later support for hot-swap easier.
+ */
+ npd = create_portdata0(dd);
+ if (npd) {
+ ipath_free_pddata(dd, pd);
+ dd->ipath_pd[0] = npd;
+ pd = npd;
+ } else {
+ ipath_dev_err(dd, "Unable to allocate portdata"
+ " for port 0, failing\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ }
+ ret = ipath_create_rcvhdrq(dd, pd);
+ if (!ret)
+ ret = create_port0_egr(dd);
+ if (ret) {
+ ipath_dev_err(dd, "failed to allocate kernel port's "
+ "rcvhdrq and/or egr bufs\n");
+ goto done;
+ }
+ else
+ enable_chip(dd, reinit);
+
+ /* after enable_chip, so pioavailshadow setup */
+ ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
+
+ /*
+ * Cancel any possible active sends from early driver load.
+ * Follows early_init because some chips have to initialize
+ * PIO buffers in early_init to avoid false parity errors.
+ * After enable and ipath_chg_pioavailkernel so we can safely
+ * enable pioavail updates and PIOENABLE; packets are now
+ * ready to go out.
+ */
+ ipath_cancel_sends(dd, 1);
+
+ if (!reinit) {
+ /*
+ * Used when we close a port, for DMA already in flight
+ * at close.
+ */
+ dd->ipath_dummy_hdrq = dma_alloc_coherent(
+ &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
+ &dd->ipath_dummy_hdrq_phys,
+ gfp_flags);
+ if (!dd->ipath_dummy_hdrq) {
+ dev_info(&dd->pcidev->dev,
+ "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
+ dd->ipath_pd[0]->port_rcvhdrq_size);
+ /* fallback to just 0'ing */
+ dd->ipath_dummy_hdrq_phys = 0UL;
+ }
+ }
+
+ /*
+ * cause retrigger of pending interrupts ignored during init,
+ * even if we had errors
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
+
+ if (!dd->ipath_stats_timer_active) {
+ /*
+ * first init, or after an admin disable/enable
+ * set up stats retrieval timer, even if we had errors
+ * in last portion of setup
+ */
+ init_timer(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer.function = ipath_get_faststats;
+ dd->ipath_stats_timer.data = (unsigned long) dd;
+ /* every 5 seconds; */
+ dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
+ /* takes ~16 seconds to overflow at full IB 4x bandwdith */
+ add_timer(&dd->ipath_stats_timer);
+ dd->ipath_stats_timer_active = 1;
+ }
+
+ /* Set up SendDMA if chip supports it */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ ret = setup_sdma(dd);
+
+ /* Set up HoL state */
+ init_timer(&dd->ipath_hol_timer);
+ dd->ipath_hol_timer.function = ipath_hol_event;
+ dd->ipath_hol_timer.data = (unsigned long)dd;
+ dd->ipath_hol_state = IPATH_HOL_UP;
+
+done:
+ if (!ret) {
+ *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
+ if (!dd->ipath_f_intrsetup(dd)) {
+ /* now we can enable all interrupts from the chip */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
+ -1LL);
+ /* force re-interrupt of any pending interrupts. */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
+ 0ULL);
+ /* chip is usable; mark it as initialized */
+ *dd->ipath_statusp |= IPATH_STATUS_INITTED;
+
+ /*
+ * setup to verify we get an interrupt, and fallback
+ * to an alternate if necessary and possible
+ */
+ if (!reinit) {
+ init_timer(&dd->ipath_intrchk_timer);
+ dd->ipath_intrchk_timer.function =
+ verify_interrupt;
+ dd->ipath_intrchk_timer.data =
+ (unsigned long) dd;
+ }
+ dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
+ add_timer(&dd->ipath_intrchk_timer);
+ } else
+ ipath_dev_err(dd, "No interrupts enabled, couldn't "
+ "setup interrupt address\n");
+
+ if (dd->ipath_cfgports > ipath_stats.sps_nports)
+ /*
+ * sps_nports is a global, so, we set it to
+ * the highest number of ports of any of the
+ * chips we find; we never decrement it, at
+ * least for now. Since this might have changed
+ * over disable/enable or prior to reset, always
+ * do the check and potentially adjust.
+ */
+ ipath_stats.sps_nports = dd->ipath_cfgports;
+ } else
+ ipath_dbg("Failed (%d) to initialize chip\n", ret);
+
+ /* if ret is non-zero, we probably should do some cleanup
+ here... */
+ return ret;
+}
+
+static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
+{
+ struct ipath_devdata *dd;
+ unsigned long flags;
+ unsigned short val;
+ int ret;
+
+ ret = ipath_parse_ushort(str, &val);
+
+ spin_lock_irqsave(&ipath_devs_lock, flags);
+
+ if (ret < 0)
+ goto bail;
+
+ if (val == 0) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
+ if (dd->ipath_kregbase)
+ continue;
+ if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
+ (dd->ipath_cfgports *
+ IPATH_MIN_USER_PORT_BUFCNT)))
+ {
+ ipath_dev_err(
+ dd,
+ "Allocating %d PIO bufs for kernel leaves "
+ "too few for %d user ports (%d each)\n",
+ val, dd->ipath_cfgports - 1,
+ IPATH_MIN_USER_PORT_BUFCNT);
+ ret = -EINVAL;
+ goto bail;
+ }
+ dd->ipath_lastport_piobuf =
+ dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
+ }
+
+ ipath_kpiobufs = val;
+ ret = 0;
+bail:
+ spin_unlock_irqrestore(&ipath_devs_lock, flags);
+
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+
+/*
+ * Called when we might have an error that is specific to a particular
+ * PIO buffer, and may need to cancel that buffer, so it can be re-used.
+ */
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
+{
+ u32 piobcnt;
+ unsigned long sbuf[4];
+ /*
+ * it's possible that sendbuffererror could have bits set; might
+ * have already done this as a result of hardware error handling
+ */
+ piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ /* read these before writing errorclear */
+ sbuf[0] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror);
+ sbuf[1] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 1);
+ if (piobcnt > 128)
+ sbuf[2] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 2);
+ if (piobcnt > 192)
+ sbuf[3] = ipath_read_kreg64(
+ dd, dd->ipath_kregs->kr_sendbuffererror + 3);
+ else
+ sbuf[3] = 0;
+
+ if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
+ int i;
+ if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG) &&
+ time_after(dd->ipath_lastcancel, jiffies)) {
+ __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
+ "SendbufErrs %lx %lx", sbuf[0],
+ sbuf[1]);
+ if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
+ printk(" %lx %lx ", sbuf[2], sbuf[3]);
+ printk("\n");
+ }
+
+ for (i = 0; i < piobcnt; i++)
+ if (test_bit(i, sbuf))
+ ipath_disarm_piobufs(dd, i, 1);
+ /* ignore armlaunch errs for a bit */
+ dd->ipath_lastcancel = jiffies+3;
+ }
+}
+
+
+/* These are all rcv-related errors which we want to count for stats */
+#define E_SUM_PKTERRS \
+ (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
+ INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
+ INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
+ INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
+ INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
+ INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
+
+/* These are all send-related errors which we want to count for stats */
+#define E_SUM_ERRS \
+ (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
+ INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+ INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
+ INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
+ INFINIPATH_E_INVALIDADDR)
+
+/*
+ * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
+ * errors not related to freeze and cancelling buffers. Can't ignore
+ * armlaunch because could get more while still cleaning up, and need
+ * to cancel those as they happen.
+ */
+#define E_SPKT_ERRS_IGNORE \
+ (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+ INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SMINPKTLEN | \
+ INFINIPATH_E_SPKTLEN)
+
+/*
+ * these are errors that can occur when the link changes state while
+ * a packet is being sent or received. This doesn't cover things
+ * like EBP or VCRC that can be the result of a sending having the
+ * link change state, so we receive a "known bad" packet.
+ */
+#define E_SUM_LINK_PKTERRS \
+ (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
+ INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
+ INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
+ INFINIPATH_E_RUNEXPCHAR)
+
+static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ u64 ignore_this_time = 0;
+
+ ipath_disarm_senderrbufs(dd);
+ if ((errs & E_SUM_LINK_PKTERRS) &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ ipath_dbg("Ignoring packet errors %llx, because link not "
+ "ACTIVE\n", (unsigned long long) errs);
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+ }
+
+ return ignore_this_time;
+}
+
+/* generic hw error messages... */
+#define INFINIPATH_HWE_TXEMEMPARITYERR_MSG(a) \
+ { \
+ .mask = ( INFINIPATH_HWE_TXEMEMPARITYERR_##a << \
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT ), \
+ .msg = "TXE " #a " Memory Parity" \
+ }
+#define INFINIPATH_HWE_RXEMEMPARITYERR_MSG(a) \
+ { \
+ .mask = ( INFINIPATH_HWE_RXEMEMPARITYERR_##a << \
+ INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT ), \
+ .msg = "RXE " #a " Memory Parity" \
+ }
+
+static const struct ipath_hwerror_msgs ipath_generic_hwerror_msgs[] = {
+ INFINIPATH_HWE_MSG(IBCBUSFRSPCPARITYERR, "IPATH2IB Parity"),
+ INFINIPATH_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2IPATH Parity"),
+
+ INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOBUF),
+ INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOPBC),
+ INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOLAUNCHFIFO),
+
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(RCVBUF),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(LOOKUPQ),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EAGERTID),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EXPTID),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(FLAGBUF),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(DATAINFO),
+ INFINIPATH_HWE_RXEMEMPARITYERR_MSG(HDRINFO),
+};
+
+/**
+ * ipath_format_hwmsg - format a single hwerror message
+ * @msg message buffer
+ * @msgl length of message buffer
+ * @hwmsg message to add to message buffer
+ */
+static void ipath_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
+{
+ strlcat(msg, "[", msgl);
+ strlcat(msg, hwmsg, msgl);
+ strlcat(msg, "]", msgl);
+}
+
+/**
+ * ipath_format_hwerrors - format hardware error messages for display
+ * @hwerrs hardware errors bit vector
+ * @hwerrmsgs hardware error descriptions
+ * @nhwerrmsgs number of hwerrmsgs
+ * @msg message buffer
+ * @msgl message buffer length
+ */
+void ipath_format_hwerrors(u64 hwerrs,
+ const struct ipath_hwerror_msgs *hwerrmsgs,
+ size_t nhwerrmsgs,
+ char *msg, size_t msgl)
+{
+ int i;
+ const int glen =
+ ARRAY_SIZE(ipath_generic_hwerror_msgs);
+
+ for (i=0; i<glen; i++) {
+ if (hwerrs & ipath_generic_hwerror_msgs[i].mask) {
+ ipath_format_hwmsg(msg, msgl,
+ ipath_generic_hwerror_msgs[i].msg);
+ }
+ }
+
+ for (i=0; i<nhwerrmsgs; i++) {
+ if (hwerrs & hwerrmsgs[i].mask) {
+ ipath_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
+ }
+ }
+}
+
+/* return the strings for the most common link states */
+static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
+{
+ char *ret;
+ u32 state;
+
+ state = ipath_ib_state(dd, ibcs);
+ if (state == dd->ib_init)
+ ret = "Init";
+ else if (state == dd->ib_arm)
+ ret = "Arm";
+ else if (state == dd->ib_active)
+ ret = "Active";
+ else
+ ret = "Down";
+ return ret;
+}
+
+void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev)
+{
+ struct ib_event event;
+
+ event.device = &dd->verbs_dev->ibdev;
+ event.element.port_num = 1;
+ event.event = ev;
+ ib_dispatch_event(&event);
+}
+
+static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
+ ipath_err_t errs)
+{
+ u32 ltstate, lstate, ibstate, lastlstate;
+ u32 init = dd->ib_init;
+ u32 arm = dd->ib_arm;
+ u32 active = dd->ib_active;
+ const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+
+ lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
+ ibstate = ipath_ib_state(dd, ibcs);
+ /* linkstate at last interrupt */
+ lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+ ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
+
+ /*
+ * Since going into a recovery state causes the link state to go
+ * down and since recovery is transitory, it is better if we "miss"
+ * ever seeing the link training state go into recovery (i.e.,
+ * ignore this transition for link state special handling purposes)
+ * without even updating ipath_lastibcstat.
+ */
+ if ((ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN) ||
+ (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT) ||
+ (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERIDLE))
+ goto done;
+
+ /*
+ * if linkstate transitions into INIT from any of the various down
+ * states, or if it transitions from any of the up (INIT or better)
+ * states into any of the down states (except link recovery), then
+ * call the chip-specific code to take appropriate actions.
+ */
+ if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
+ lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
+ /* transitioned to UP */
+ if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
+ /* link came up, so we must no longer be disabled */
+ dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
+ ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
+ }
+ } else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
+ (dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
+ ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT &&
+ ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ int handled;
+ handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
+ dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
+ if (handled) {
+ ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
+ }
+ }
+
+ /*
+ * Significant enough to always print and get into logs, if it was
+ * unexpected. If it was a requested state change, we'll have
+ * already cleared the flags, so we won't print this warning
+ */
+ if ((ibstate != arm && ibstate != active) &&
+ (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
+ dev_info(&dd->pcidev->dev, "Link state changed from %s "
+ "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
+ "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
+ }
+
+ if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+ ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ u32 lastlts;
+ lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
+ /*
+ * Ignore cycling back and forth from Polling.Active to
+ * Polling.Quiet while waiting for the other end of the link
+ * to come up, except to try and decide if we are connected
+ * to a live IB device or not. We will cycle back and
+ * forth between them if no cable is plugged in, the other
+ * device is powered off or disabled, etc.
+ */
+ if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+ lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
+ (++dd->ipath_ibpollcnt == 40)) {
+ dd->ipath_flags |= IPATH_NOCABLE;
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_NOCABLE;
+ ipath_cdbg(LINKVERB, "Set NOCABLE\n");
+ }
+ ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
+ ipath_ibcstatus_str[ltstate], ibstate);
+ goto skip_ibchange;
+ }
+ }
+
+ dd->ipath_ibpollcnt = 0; /* not poll*, now */
+ ipath_stats.sps_iblink++;
+
+ if (ibstate != init && dd->ipath_lastlinkrecov && ipath_linkrecovery) {
+ u64 linkrecov;
+ linkrecov = ipath_snap_cntr(dd,
+ dd->ipath_cregs->cr_iblinkerrrecovcnt);
+ if (linkrecov != dd->ipath_lastlinkrecov) {
+ ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
+ (unsigned long long) ibcs,
+ ib_linkstate(dd, ibcs),
+ ipath_ibcstatus_str[ltstate],
+ (unsigned long long) linkrecov);
+ /* and no more until active again */
+ dd->ipath_lastlinkrecov = 0;
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ goto skip_ibchange;
+ }
+ }
+
+ if (ibstate == init || ibstate == arm || ibstate == active) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+ if (ibstate == init || ibstate == arm) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+ }
+ if (ibstate == arm) {
+ dd->ipath_flags |= IPATH_LINKARMED;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKINIT | IPATH_LINKDOWN |
+ IPATH_LINKACTIVE | IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else if (ibstate == init) {
+ /*
+ * set INIT and DOWN. Down is checked by
+ * most of the other code, but INIT is
+ * useful to know in a few places.
+ */
+ dd->ipath_flags |= IPATH_LINKINIT |
+ IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKARMED | IPATH_LINKACTIVE |
+ IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else { /* active */
+ dd->ipath_lastlinkrecov = ipath_snap_cntr(dd,
+ dd->ipath_cregs->cr_iblinkerrrecovcnt);
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+ dd->ipath_flags |= IPATH_LINKACTIVE;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKDOWN | IPATH_LINKARMED |
+ IPATH_NOCABLE);
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ ipath_restart_sdma(dd);
+ signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
+ /* LED active not handled in chip _f_updown */
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ ipath_hol_up(dd);
+ }
+
+ /*
+ * print after we've already done the work, so as not to
+ * delay the state changes and notifications, for debugging
+ */
+ if (lstate == lastlstate)
+ ipath_cdbg(LINKVERB, "Unchanged from last: %s "
+ "(%x)\n", ib_linkstate(dd, ibcs), ibstate);
+ else
+ ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
+ dd->ipath_unit, ib_linkstate(dd, ibcs),
+ ipath_ibcstatus_str[ltstate], ibstate);
+ } else { /* down */
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKACTIVE |
+ IPATH_LINKARMED);
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ dd->ipath_lli_counter = 0;
+
+ if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
+ ipath_cdbg(VERBOSE, "Unit %u link state down "
+ "(state 0x%x), from %s\n",
+ dd->ipath_unit, lstate,
+ ib_linkstate(dd, dd->ipath_lastibcstat));
+ else
+ ipath_cdbg(LINKVERB, "Unit %u link state changed "
+ "to %s (0x%x) from down (%x)\n",
+ dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate],
+ ibstate, lastlstate);
+ }
+
+skip_ibchange:
+ dd->ipath_lastibcstat = ibcs;
+done:
+ return;
+}
+
+static void handle_supp_msgs(struct ipath_devdata *dd,
+ unsigned supp_msgs, char *msg, u32 msgsz)
+{
+ /*
+ * Print the message unless it's ibc status change only, which
+ * happens so often we never want to count it.
+ */
+ if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
+ int iserr;
+ ipath_err_t mask;
+ iserr = ipath_decode_err(dd, msg, msgsz,
+ dd->ipath_lasterror &
+ ~INFINIPATH_E_IBSTATUSCHANGED);
+
+ mask = INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_PKTERRS | INFINIPATH_E_SDMADISABLED;
+
+ /* if we're in debug, then don't mask SDMADISABLED msgs */
+ if (ipath_debug & __IPATH_DBG)
+ mask &= ~INFINIPATH_E_SDMADISABLED;
+
+ if (dd->ipath_lasterror & ~mask)
+ ipath_dev_err(dd, "Suppressed %u messages for "
+ "fast-repeating errors (%s) (%llx)\n",
+ supp_msgs, msg,
+ (unsigned long long)
+ dd->ipath_lasterror);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal", for some
+ * types of processes (mostly benchmarks) that send
+ * huge numbers of messages, while not processing
+ * them. So only complain about these at debug
+ * level.
+ */
+ if (iserr)
+ ipath_dbg("Suppressed %u messages for %s\n",
+ supp_msgs, msg);
+ else
+ ipath_cdbg(ERRPKT,
+ "Suppressed %u messages for %s\n",
+ supp_msgs, msg);
+ }
+ }
+}
+
+static unsigned handle_frequent_errors(struct ipath_devdata *dd,
+ ipath_err_t errs, char *msg,
+ u32 msgsz, int *noprint)
+{
+ unsigned long nc;
+ static unsigned long nextmsg_time;
+ static unsigned nmsgs, supp_msgs;
+
+ /*
+ * Throttle back "fast" messages to no more than 10 per 5 seconds.
+ * This isn't perfect, but it's a reasonable heuristic. If we get
+ * more than 10, give a 6x longer delay.
+ */
+ nc = jiffies;
+ if (nmsgs > 10) {
+ if (time_before(nc, nextmsg_time)) {
+ *noprint = 1;
+ if (!supp_msgs++)
+ nextmsg_time = nc + HZ * 3;
+ }
+ else if (supp_msgs) {
+ handle_supp_msgs(dd, supp_msgs, msg, msgsz);
+ supp_msgs = 0;
+ nmsgs = 0;
+ }
+ }
+ else if (!nmsgs++ || time_after(nc, nextmsg_time))
+ nextmsg_time = nc + HZ / 2;
+
+ return supp_msgs;
+}
+
+static void handle_sdma_errors(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ unsigned long flags;
+ int expected;
+
+ if (ipath_debug & __IPATH_DBG) {
+ char msg[128];
+ ipath_decode_err(dd, msg, sizeof msg, errs &
+ INFINIPATH_E_SDMAERRS);
+ ipath_dbg("errors %lx (%s)\n", (unsigned long)errs, msg);
+ }
+ if (ipath_debug & __IPATH_VERBDBG) {
+ unsigned long tl, hd, status, lengen;
+ tl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
+ hd = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
+ status = ipath_read_kreg64(dd
+ , dd->ipath_kregs->kr_senddmastatus);
+ lengen = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_senddmalengen);
+ ipath_cdbg(VERBOSE, "sdma tl 0x%lx hd 0x%lx status 0x%lx "
+ "lengen 0x%lx\n", tl, hd, status, lengen);
+ }
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ expected = test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!expected)
+ ipath_cancel_sends(dd, 1);
+}
+
+static void handle_sdma_intr(struct ipath_devdata *dd, u64 istat)
+{
+ unsigned long flags;
+ int expected;
+
+ if ((istat & INFINIPATH_I_SDMAINT) &&
+ !test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ ipath_sdma_intr(dd);
+
+ if (istat & INFINIPATH_I_SDMADISABLED) {
+ expected = test_bit(IPATH_SDMA_ABORTING,
+ &dd->ipath_sdma_status);
+ ipath_dbg("%s SDmaDisabled intr\n",
+ expected ? "expected" : "unexpected");
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!expected)
+ ipath_cancel_sends(dd, 1);
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ }
+}
+
+static int handle_hdrq_full(struct ipath_devdata *dd)
+{
+ int chkerrpkts = 0;
+ u32 hd, tl;
+ u32 i;
+
+ ipath_stats.sps_hdrqfull++;
+ for (i = 0; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ if (i == 0) {
+ /*
+ * For kernel receive queues, we just want to know
+ * if there are packets in the queue that we can
+ * process.
+ */
+ if (pd->port_head != ipath_get_hdrqtail(pd))
+ chkerrpkts |= 1 << i;
+ continue;
+ }
+
+ /* Skip if user context is not open */
+ if (!pd || !pd->port_cnt)
+ continue;
+
+ /* Don't report the same point multiple times. */
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL)
+ tl = ipath_read_ureg32(dd, ur_rcvhdrtail, i);
+ else
+ tl = ipath_get_rcvhdrtail(pd);
+ if (tl == pd->port_lastrcvhdrqtail)
+ continue;
+
+ hd = ipath_read_ureg32(dd, ur_rcvhdrhead, i);
+ if (hd == (tl + 1) || (!hd && tl == dd->ipath_hdrqlast)) {
+ pd->port_lastrcvhdrqtail = tl;
+ pd->port_hdrqfull++;
+ /* flush hdrqfull so that poll() sees it */
+ wmb();
+ wake_up_interruptible(&pd->port_wait);
+ }
+ }
+
+ return chkerrpkts;
+}
+
+static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ char msg[128];
+ u64 ignore_this_time = 0;
+ u64 iserr = 0;
+ int chkerrpkts = 0, noprint = 0;
+ unsigned supp_msgs;
+ int log_idx;
+
+ /*
+ * don't report errors that are masked, either at init
+ * (not set in ipath_errormask), or temporarily (set in
+ * ipath_maskederrs)
+ */
+ errs &= dd->ipath_errormask & ~dd->ipath_maskederrs;
+
+ supp_msgs = handle_frequent_errors(dd, errs, msg, (u32)sizeof msg,
+ &noprint);
+
+ /* do these first, they are most important */
+ if (errs & INFINIPATH_E_HARDWARE) {
+ /* reuse same msg buf */
+ dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
+ } else {
+ u64 mask;
+ for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) {
+ mask = dd->ipath_eep_st_masks[log_idx].errs_to_log;
+ if (errs & mask)
+ ipath_inc_eeprom_err(dd, log_idx, 1);
+ }
+ }
+
+ if (errs & INFINIPATH_E_SDMAERRS)
+ handle_sdma_errors(dd, errs);
+
+ if (!noprint && (errs & ~dd->ipath_e_bitsextant))
+ ipath_dev_err(dd, "error interrupt with unknown errors "
+ "%llx set\n", (unsigned long long)
+ (errs & ~dd->ipath_e_bitsextant));
+
+ if (errs & E_SUM_ERRS)
+ ignore_this_time = handle_e_sum_errs(dd, errs);
+ else if ((errs & E_SUM_LINK_PKTERRS) &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ /*
+ * This can happen when SMA is trying to bring the link
+ * up, but the IB link changes state at the "wrong" time.
+ * The IB logic then complains that the packet isn't
+ * valid. We don't want to confuse people, so we just
+ * don't print them, except at debug
+ */
+ ipath_dbg("Ignoring packet errors %llx, because link not "
+ "ACTIVE\n", (unsigned long long) errs);
+ ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+ }
+
+ if (supp_msgs == 250000) {
+ int s_iserr;
+ /*
+ * It's not entirely reasonable assuming that the errors set
+ * in the last clear period are all responsible for the
+ * problem, but the alternative is to assume it's the only
+ * ones on this particular interrupt, which also isn't great
+ */
+ dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
+
+ dd->ipath_errormask &= ~dd->ipath_maskederrs;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+ s_iserr = ipath_decode_err(dd, msg, sizeof msg,
+ dd->ipath_maskederrs);
+
+ if (dd->ipath_maskederrs &
+ ~(INFINIPATH_E_RRCVEGRFULL |
+ INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
+ ipath_dev_err(dd, "Temporarily disabling "
+ "error(s) %llx reporting; too frequent (%s)\n",
+ (unsigned long long) dd->ipath_maskederrs,
+ msg);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal",
+ * for some types of processes (mostly benchmarks)
+ * that send huge numbers of messages, while not
+ * processing them. So only complain about
+ * these at debug level.
+ */
+ if (s_iserr)
+ ipath_dbg("Temporarily disabling reporting "
+ "too frequent queue full errors (%s)\n",
+ msg);
+ else
+ ipath_cdbg(ERRPKT,
+ "Temporarily disabling reporting too"
+ " frequent packet errors (%s)\n",
+ msg);
+ }
+
+ /*
+ * Re-enable the masked errors after around 3 minutes. in
+ * ipath_get_faststats(). If we have a series of fast
+ * repeating but different errors, the interval will keep
+ * stretching out, but that's OK, as that's pretty
+ * catastrophic.
+ */
+ dd->ipath_unmasktime = jiffies + HZ * 180;
+ }
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
+ if (ignore_this_time)
+ errs &= ~ignore_this_time;
+ if (errs & ~dd->ipath_lasterror) {
+ errs &= ~dd->ipath_lasterror;
+ /* never suppress duplicate hwerrors or ibstatuschange */
+ dd->ipath_lasterror |= errs &
+ ~(INFINIPATH_E_HARDWARE |
+ INFINIPATH_E_IBSTATUSCHANGED);
+ }
+
+ if (errs & INFINIPATH_E_SENDSPECIALTRIGGER) {
+ dd->ipath_spectriggerhit++;
+ ipath_dbg("%lu special trigger hits\n",
+ dd->ipath_spectriggerhit);
+ }
+
+ /* likely due to cancel; so suppress message unless verbose */
+ if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
+ time_after(dd->ipath_lastcancel, jiffies)) {
+ /* armlaunch takes precedence; it often causes both. */
+ ipath_cdbg(VERBOSE,
+ "Suppressed %s error (%llx) after sendbuf cancel\n",
+ (errs & INFINIPATH_E_SPIOARMLAUNCH) ?
+ "armlaunch" : "sendpktlen", (unsigned long long)errs);
+ errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
+ }
+
+ if (!errs)
+ return 0;
+
+ if (!noprint) {
+ ipath_err_t mask;
+ /*
+ * The ones we mask off are handled specially below
+ * or above. Also mask SDMADISABLED by default as it
+ * is too chatty.
+ */
+ mask = INFINIPATH_E_IBSTATUSCHANGED |
+ INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_HARDWARE | INFINIPATH_E_SDMADISABLED;
+
+ /* if we're in debug, then don't mask SDMADISABLED msgs */
+ if (ipath_debug & __IPATH_DBG)
+ mask &= ~INFINIPATH_E_SDMADISABLED;
+
+ ipath_decode_err(dd, msg, sizeof msg, errs & ~mask);
+ } else
+ /* so we don't need if (!noprint) at strlcat's below */
+ *msg = 0;
+
+ if (errs & E_SUM_PKTERRS) {
+ ipath_stats.sps_pkterrs++;
+ chkerrpkts = 1;
+ }
+ if (errs & E_SUM_ERRS)
+ ipath_stats.sps_errs++;
+
+ if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
+ ipath_stats.sps_crcerrs++;
+ chkerrpkts = 1;
+ }
+ iserr = errs & ~(E_SUM_PKTERRS | INFINIPATH_E_PKTERRS);
+
+
+ /*
+ * We don't want to print these two as they happen, or we can make
+ * the situation even worse, because it takes so long to print
+ * messages to serial consoles. Kernel ports get printed from
+ * fast_stats, no more than every 5 seconds, user ports get printed
+ * on close
+ */
+ if (errs & INFINIPATH_E_RRCVHDRFULL)
+ chkerrpkts |= handle_hdrq_full(dd);
+ if (errs & INFINIPATH_E_RRCVEGRFULL) {
+ struct ipath_portdata *pd = dd->ipath_pd[0];
+
+ /*
+ * since this is of less importance and not likely to
+ * happen without also getting hdrfull, only count
+ * occurrences; don't check each port (or even the kernel
+ * vs user)
+ */
+ ipath_stats.sps_etidfull++;
+ if (pd->port_head != ipath_get_hdrqtail(pd))
+ chkerrpkts |= 1;
+ }
+
+ /*
+ * do this before IBSTATUSCHANGED, in case both bits set in a single
+ * interrupt; we want the STATUSCHANGE to "win", so we do our
+ * internal copy of state machine correctly
+ */
+ if (errs & INFINIPATH_E_RIBLOSTLINK) {
+ /*
+ * force through block below
+ */
+ errs |= INFINIPATH_E_IBSTATUSCHANGED;
+ ipath_stats.sps_iblink++;
+ dd->ipath_flags |= IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKARMED | IPATH_LINKACTIVE);
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+
+ ipath_dbg("Lost link, link now down (%s)\n",
+ ipath_ibcstatus_str[ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_ibcstatus) & 0xf]);
+ }
+ if (errs & INFINIPATH_E_IBSTATUSCHANGED)
+ handle_e_ibstatuschanged(dd, errs);
+
+ if (errs & INFINIPATH_E_RESET) {
+ if (!noprint)
+ ipath_dev_err(dd, "Got reset, requires re-init "
+ "(unload and reload driver)\n");
+ dd->ipath_flags &= ~IPATH_INITTED; /* needs re-init */
+ /* mark as having had error */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
+ }
+
+ if (!noprint && *msg) {
+ if (iserr)
+ ipath_dev_err(dd, "%s error\n", msg);
+ }
+ if (dd->ipath_state_wanted & dd->ipath_flags) {
+ ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
+ "waking\n", dd->ipath_state_wanted,
+ dd->ipath_flags);
+ wake_up_interruptible(&ipath_state_wait);
+ }
+
+ return chkerrpkts;
+}
+
+/*
+ * try to cleanup as much as possible for anything that might have gone
+ * wrong while in freeze mode, such as pio buffers being written by user
+ * processes (causing armlaunch), send errors due to going into freeze mode,
+ * etc., and try to avoid causing extra interrupts while doing so.
+ * Forcibly update the in-memory pioavail register copies after cleanup
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
+ * Make sure that we don't lose any important interrupts by using the chip
+ * feature that says that writing 0 to a bit in *clear that is set in
+ * *status will cause an interrupt to be generated again (if allowed by
+ * the *mask value).
+ */
+void ipath_clear_freeze(struct ipath_devdata *dd)
+{
+ /* disable error interrupts, to avoid confusion */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
+
+ /* also disable interrupts; errormask is sometimes overwriten */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+
+ ipath_cancel_sends(dd, 1);
+
+ /* clear the freeze, and be sure chip saw it */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+
+ /* force in-memory update now we are out of freeze */
+ ipath_force_pio_avail_update(dd);
+
+ /*
+ * force new interrupt if any hwerr, error or interrupt bits are
+ * still set, and clear "safe" send packet errors related to freeze
+ * and cancelling sends. Re-enable error interrupts before possible
+ * force of re-interrupt on pending interrupts.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
+ E_SPKT_ERRS_IGNORE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, -1LL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
+}
+
+
+/* this is separate to allow for better optimization of ipath_intr() */
+
+static noinline void ipath_bad_intr(struct ipath_devdata *dd, u32 *unexpectp)
+{
+ /*
+ * sometimes happen during driver init and unload, don't want
+ * to process any interrupts at that point
+ */
+
+ /* this is just a bandaid, not a fix, if something goes badly
+ * wrong */
+ if (++*unexpectp > 100) {
+ if (++*unexpectp > 105) {
+ /*
+ * ok, we must be taking somebody else's interrupts,
+ * due to a messed up mptable and/or PIRQ table, so
+ * unregister the interrupt. We've seen this during
+ * linuxbios development work, and it may happen in
+ * the future again.
+ */
+ if (dd->pcidev && dd->ipath_irq) {
+ ipath_dev_err(dd, "Now %u unexpected "
+ "interrupts, unregistering "
+ "interrupt handler\n",
+ *unexpectp);
+ ipath_dbg("free_irq of irq %d\n",
+ dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
+ }
+ }
+ if (ipath_read_ireg(dd, dd->ipath_kregs->kr_intmask)) {
+ ipath_dev_err(dd, "%u unexpected interrupts, "
+ "disabling interrupts completely\n",
+ *unexpectp);
+ /*
+ * disable all interrupts, something is very wrong
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
+ 0ULL);
+ }
+ } else if (*unexpectp > 1)
+ ipath_dbg("Interrupt when not ready, should not happen, "
+ "ignoring\n");
+}
+
+static noinline void ipath_bad_regread(struct ipath_devdata *dd)
+{
+ static int allbits;
+
+ /* separate routine, for better optimization of ipath_intr() */
+
+ /*
+ * We print the message and disable interrupts, in hope of
+ * having a better chance of debugging the problem.
+ */
+ ipath_dev_err(dd,
+ "Read of interrupt status failed (all bits set)\n");
+ if (allbits++) {
+ /* disable all interrupts, something is very wrong */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
+ if (allbits == 2) {
+ ipath_dev_err(dd, "Still bad interrupt status, "
+ "unregistering interrupt\n");
+ dd->ipath_f_free_irq(dd);
+ } else if (allbits > 2) {
+ if ((allbits % 10000) == 0)
+ printk(".");
+ } else
+ ipath_dev_err(dd, "Disabling interrupts, "
+ "multiple errors\n");
+ }
+}
+
+static void handle_layer_pioavail(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ int ret;
+
+ ret = ipath_ib_piobufavail(dd->verbs_dev);
+ if (ret > 0)
+ goto set;
+
+ return;
+set:
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+}
+
+/*
+ * Handle receive interrupts for user ports; this means a user
+ * process was waiting for a packet to arrive, and didn't want
+ * to poll
+ */
+static void handle_urcv(struct ipath_devdata *dd, u64 istat)
+{
+ u64 portr;
+ int i;
+ int rcvdint = 0;
+
+ /*
+ * test_and_clear_bit(IPATH_PORT_WAITING_RCV) and
+ * test_and_clear_bit(IPATH_PORT_WAITING_URG) below
+ * would both like timely updates of the bits so that
+ * we don't pass them by unnecessarily. the rmb()
+ * here ensures that we see them promptly -- the
+ * corresponding wmb()'s are in ipath_poll_urgent()
+ * and ipath_poll_next()...
+ */
+ rmb();
+ portr = ((istat >> dd->ipath_i_rcvavail_shift) &
+ dd->ipath_i_rcvavail_mask) |
+ ((istat >> dd->ipath_i_rcvurg_shift) &
+ dd->ipath_i_rcvurg_mask);
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ if (portr & (1 << i) && pd && pd->port_cnt) {
+ if (test_and_clear_bit(IPATH_PORT_WAITING_RCV,
+ &pd->port_flag)) {
+ clear_bit(i + dd->ipath_r_intravail_shift,
+ &dd->ipath_rcvctrl);
+ wake_up_interruptible(&pd->port_wait);
+ rcvdint = 1;
+ } else if (test_and_clear_bit(IPATH_PORT_WAITING_URG,
+ &pd->port_flag)) {
+ pd->port_urgent++;
+ wake_up_interruptible(&pd->port_wait);
+ }
+ }
+ }
+ if (rcvdint) {
+ /* only want to take one interrupt, so turn off the rcv
+ * interrupt for all the ports that we set the rcv_waiting
+ * (but never for kernel port)
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ }
+}
+
+irqreturn_t ipath_intr(int irq, void *data)
+{
+ struct ipath_devdata *dd = data;
+ u64 istat, chk0rcv = 0;
+ ipath_err_t estat = 0;
+ irqreturn_t ret;
+ static unsigned unexpected = 0;
+ u64 kportrbits;
+
+ ipath_stats.sps_ints++;
+
+ if (dd->ipath_int_counter != (u32) -1)
+ dd->ipath_int_counter++;
+
+ if (!(dd->ipath_flags & IPATH_PRESENT)) {
+ /*
+ * This return value is not great, but we do not want the
+ * interrupt core code to remove our interrupt handler
+ * because we don't appear to be handling an interrupt
+ * during a chip reset.
+ */
+ return IRQ_HANDLED;
+ }
+
+ /*
+ * this needs to be flags&initted, not statusp, so we keep
+ * taking interrupts even after link goes down, etc.
+ * Also, we *must* clear the interrupt at some point, or we won't
+ * take it again, which can be real bad for errors, etc...
+ */
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ ipath_bad_intr(dd, &unexpected);
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ istat = ipath_read_ireg(dd, dd->ipath_kregs->kr_intstatus);
+
+ if (unlikely(!istat)) {
+ ipath_stats.sps_nullintr++;
+ ret = IRQ_NONE; /* not our interrupt, or already handled */
+ goto bail;
+ }
+ if (unlikely(istat == -1)) {
+ ipath_bad_regread(dd);
+ /* don't know if it was our interrupt or not */
+ ret = IRQ_NONE;
+ goto bail;
+ }
+
+ if (unexpected)
+ unexpected = 0;
+
+ if (unlikely(istat & ~dd->ipath_i_bitsextant))
+ ipath_dev_err(dd,
+ "interrupt with unknown interrupts %Lx set\n",
+ (unsigned long long)
+ istat & ~dd->ipath_i_bitsextant);
+ else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
+ ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n",
+ (unsigned long long) istat);
+
+ if (istat & INFINIPATH_I_ERROR) {
+ ipath_stats.sps_errints++;
+ estat = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_errorstatus);
+ if (!estat)
+ dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
+ "but no error bits set!\n",
+ (unsigned long long) istat);
+ else if (estat == -1LL)
+ /*
+ * should we try clearing all, or hope next read
+ * works?
+ */
+ ipath_dev_err(dd, "Read of error status failed "
+ "(all bits set); ignoring\n");
+ else
+ chk0rcv |= handle_errors(dd, estat);
+ }
+
+ if (istat & INFINIPATH_I_GPIO) {
+ /*
+ * GPIO interrupts fall in two broad classes:
+ * GPIO_2 indicates (on some HT4xx boards) that a packet
+ * has arrived for Port 0. Checking for this
+ * is controlled by flag IPATH_GPIO_INTR.
+ * GPIO_3..5 on IBA6120 Rev2 and IBA6110 Rev4 chips indicate
+ * errors that we need to count. Checking for this
+ * is controlled by flag IPATH_GPIO_ERRINTRS.
+ */
+ u32 gpiostatus;
+ u32 to_clear = 0;
+
+ gpiostatus = ipath_read_kreg32(
+ dd, dd->ipath_kregs->kr_gpio_status);
+ /* First the error-counter case. */
+ if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
+ (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
+ /* want to clear the bits we see asserted. */
+ to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
+
+ /*
+ * Count appropriately, clear bits out of our copy,
+ * as they have been "handled".
+ */
+ if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
+ ipath_dbg("FlowCtl on UnsupVL\n");
+ dd->ipath_rxfc_unsupvl_errs++;
+ }
+ if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
+ ipath_dbg("Overrun Threshold exceeded\n");
+ dd->ipath_overrun_thresh_errs++;
+ }
+ if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
+ ipath_dbg("Local Link Integrity error\n");
+ dd->ipath_lli_errs++;
+ }
+ gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
+ }
+ /* Now the Port0 Receive case */
+ if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
+ (dd->ipath_flags & IPATH_GPIO_INTR)) {
+ /*
+ * GPIO status bit 2 is set, and we expected it.
+ * clear it and indicate in p0bits.
+ * This probably only happens if a Port0 pkt
+ * arrives at _just_ the wrong time, and we
+ * handle that by seting chk0rcv;
+ */
+ to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
+ gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
+ chk0rcv = 1;
+ }
+ if (gpiostatus) {
+ /*
+ * Some unexpected bits remain. If they could have
+ * caused the interrupt, complain and clear.
+ * To avoid repetition of this condition, also clear
+ * the mask. It is almost certainly due to error.
+ */
+ const u32 mask = (u32) dd->ipath_gpio_mask;
+
+ if (mask & gpiostatus) {
+ ipath_dbg("Unexpected GPIO IRQ bits %x\n",
+ gpiostatus & mask);
+ to_clear |= (gpiostatus & mask);
+ dd->ipath_gpio_mask &= ~(gpiostatus & mask);
+ ipath_write_kreg(dd,
+ dd->ipath_kregs->kr_gpio_mask,
+ dd->ipath_gpio_mask);
+ }
+ }
+ if (to_clear) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
+ (u64) to_clear);
+ }
+ }
+
+ /*
+ * Clear the interrupt bits we found set, unless they are receive
+ * related, in which case we already cleared them above, and don't
+ * want to clear them again, because we might lose an interrupt.
+ * Clear it early, so we "know" know the chip will have seen this by
+ * the time we process the queue, and will re-interrupt if necessary.
+ * The processor itself won't take the interrupt again until we return.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
+
+ /*
+ * Handle kernel receive queues before checking for pio buffers
+ * available since receives can overflow; piobuf waiters can afford
+ * a few extra cycles, since they were waiting anyway, and user's
+ * waiting for receive are at the bottom.
+ */
+ kportrbits = (1ULL << dd->ipath_i_rcvavail_shift) |
+ (1ULL << dd->ipath_i_rcvurg_shift);
+ if (chk0rcv || (istat & kportrbits)) {
+ istat &= ~kportrbits;
+ ipath_kreceive(dd->ipath_pd[0]);
+ }
+
+ if (istat & ((dd->ipath_i_rcvavail_mask << dd->ipath_i_rcvavail_shift) |
+ (dd->ipath_i_rcvurg_mask << dd->ipath_i_rcvurg_shift)))
+ handle_urcv(dd, istat);
+
+ if (istat & (INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED))
+ handle_sdma_intr(dd, istat);
+
+ if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~INFINIPATH_S_PIOINTBUFAVAIL;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* always process; sdma verbs uses PIO for acks and VL15 */
+ handle_layer_pioavail(dd);
+ }
+
+ ret = IRQ_HANDLED;
+
+bail:
+ return ret;
+}
--- /dev/null
+#ifndef _IPATH_KERNEL_H
+#define _IPATH_KERNEL_H
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This header file is the base header file for infinipath kernel code
+ * ipath_user.h serves a similar purpose for user code.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+#include <asm/io.h>
+#include <rdma/ib_verbs.h>
+
+#include "ipath_common.h"
+#include "ipath_debug.h"
+#include "ipath_registers.h"
+
+/* only s/w major version of InfiniPath we can handle */
+#define IPATH_CHIP_VERS_MAJ 2U
+
+/* don't care about this except printing */
+#define IPATH_CHIP_VERS_MIN 0U
+
+/* temporary, maybe always */
+extern struct infinipath_stats ipath_stats;
+
+#define IPATH_CHIP_SWVERSION IPATH_CHIP_VERS_MAJ
+/*
+ * First-cut critierion for "device is active" is
+ * two thousand dwords combined Tx, Rx traffic per
+ * 5-second interval. SMA packets are 64 dwords,
+ * and occur "a few per second", presumably each way.
+ */
+#define IPATH_TRAFFIC_ACTIVE_THRESHOLD (2000)
+/*
+ * Struct used to indicate which errors are logged in each of the
+ * error-counters that are logged to EEPROM. A counter is incremented
+ * _once_ (saturating at 255) for each event with any bits set in
+ * the error or hwerror register masks below.
+ */
+#define IPATH_EEP_LOG_CNT (4)
+struct ipath_eep_log_mask {
+ u64 errs_to_log;
+ u64 hwerrs_to_log;
+};
+
+struct ipath_portdata {
+ void **port_rcvegrbuf;
+ dma_addr_t *port_rcvegrbuf_phys;
+ /* rcvhdrq base, needs mmap before useful */
+ void *port_rcvhdrq;
+ /* kernel virtual address where hdrqtail is updated */
+ void *port_rcvhdrtail_kvaddr;
+ /*
+ * temp buffer for expected send setup, allocated at open, instead
+ * of each setup call
+ */
+ void *port_tid_pg_list;
+ /* when waiting for rcv or pioavail */
+ wait_queue_head_t port_wait;
+ /*
+ * rcvegr bufs base, physical, must fit
+ * in 44 bits so 32 bit programs mmap64 44 bit works)
+ */
+ dma_addr_t port_rcvegr_phys;
+ /* mmap of hdrq, must fit in 44 bits */
+ dma_addr_t port_rcvhdrq_phys;
+ dma_addr_t port_rcvhdrqtailaddr_phys;
+ /*
+ * number of opens (including slave subports) on this instance
+ * (ignoring forks, dup, etc. for now)
+ */
+ int port_cnt;
+ /*
+ * how much space to leave at start of eager TID entries for
+ * protocol use, on each TID
+ */
+ /* instead of calculating it */
+ unsigned port_port;
+ /* non-zero if port is being shared. */
+ u16 port_subport_cnt;
+ /* non-zero if port is being shared. */
+ u16 port_subport_id;
+ /* number of pio bufs for this port (all procs, if shared) */
+ u32 port_piocnt;
+ /* first pio buffer for this port */
+ u32 port_pio_base;
+ /* chip offset of PIO buffers for this port */
+ u32 port_piobufs;
+ /* how many alloc_pages() chunks in port_rcvegrbuf_pages */
+ u32 port_rcvegrbuf_chunks;
+ /* how many egrbufs per chunk */
+ u32 port_rcvegrbufs_perchunk;
+ /* order for port_rcvegrbuf_pages */
+ size_t port_rcvegrbuf_size;
+ /* rcvhdrq size (for freeing) */
+ size_t port_rcvhdrq_size;
+ /* next expected TID to check when looking for free */
+ u32 port_tidcursor;
+ /* next expected TID to check */
+ unsigned long port_flag;
+ /* what happened */
+ unsigned long int_flag;
+ /* WAIT_RCV that timed out, no interrupt */
+ u32 port_rcvwait_to;
+ /* WAIT_PIO that timed out, no interrupt */
+ u32 port_piowait_to;
+ /* WAIT_RCV already happened, no wait */
+ u32 port_rcvnowait;
+ /* WAIT_PIO already happened, no wait */
+ u32 port_pionowait;
+ /* total number of rcvhdrqfull errors */
+ u32 port_hdrqfull;
+ /*
+ * Used to suppress multiple instances of same
+ * port staying stuck at same point.
+ */
+ u32 port_lastrcvhdrqtail;
+ /* saved total number of rcvhdrqfull errors for poll edge trigger */
+ u32 port_hdrqfull_poll;
+ /* total number of polled urgent packets */
+ u32 port_urgent;
+ /* saved total number of polled urgent packets for poll edge trigger */
+ u32 port_urgent_poll;
+ /* pid of process using this port */
+ struct pid *port_pid;
+ struct pid *port_subpid[INFINIPATH_MAX_SUBPORT];
+ /* same size as task_struct .comm[] */
+ char port_comm[16];
+ /* pkeys set by this use of this port */
+ u16 port_pkeys[4];
+ /* so file ops can get at unit */
+ struct ipath_devdata *port_dd;
+ /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
+ void *subport_uregbase;
+ /* An array of pages for the eager receive buffers * N */
+ void *subport_rcvegrbuf;
+ /* An array of pages for the eager header queue entries * N */
+ void *subport_rcvhdr_base;
+ /* The version of the library which opened this port */
+ u32 userversion;
+ /* Bitmask of active slaves */
+ u32 active_slaves;
+ /* Type of packets or conditions we want to poll for */
+ u16 poll_type;
+ /* port rcvhdrq head offset */
+ u32 port_head;
+ /* receive packet sequence counter */
+ u32 port_seq_cnt;
+};
+
+struct sk_buff;
+struct ipath_sge_state;
+struct ipath_verbs_txreq;
+
+/*
+ * control information for layered drivers
+ */
+struct _ipath_layer {
+ void *l_arg;
+};
+
+struct ipath_skbinfo {
+ struct sk_buff *skb;
+ dma_addr_t phys;
+};
+
+struct ipath_sdma_txreq {
+ int flags;
+ int sg_count;
+ union {
+ struct scatterlist *sg;
+ void *map_addr;
+ };
+ void (*callback)(void *, int);
+ void *callback_cookie;
+ int callback_status;
+ u16 start_idx; /* sdma private */
+ u16 next_descq_idx; /* sdma private */
+ struct list_head list; /* sdma private */
+};
+
+struct ipath_sdma_desc {
+ __le64 qw[2];
+};
+
+#define IPATH_SDMA_TXREQ_F_USELARGEBUF 0x1
+#define IPATH_SDMA_TXREQ_F_HEADTOHOST 0x2
+#define IPATH_SDMA_TXREQ_F_INTREQ 0x4
+#define IPATH_SDMA_TXREQ_F_FREEBUF 0x8
+#define IPATH_SDMA_TXREQ_F_FREEDESC 0x10
+#define IPATH_SDMA_TXREQ_F_VL15 0x20
+
+#define IPATH_SDMA_TXREQ_S_OK 0
+#define IPATH_SDMA_TXREQ_S_SENDERROR 1
+#define IPATH_SDMA_TXREQ_S_ABORTED 2
+#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
+
+#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
+#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
+#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
+#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
+
+/* max dwords in small buffer packet */
+#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
+
+/*
+ * Possible IB config parameters for ipath_f_get/set_ib_cfg()
+ */
+#define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */
+#define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */
+#define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */
+#define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */
+#define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */
+#define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */
+#define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */
+#define IPATH_IB_CFG_SPD 5 /* Get current Link spd */
+#define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */
+#define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */
+#define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */
+
+
+struct ipath_devdata {
+ struct list_head ipath_list;
+
+ struct ipath_kregs const *ipath_kregs;
+ struct ipath_cregs const *ipath_cregs;
+
+ /* mem-mapped pointer to base of chip regs */
+ u64 __iomem *ipath_kregbase;
+ /* end of mem-mapped chip space; range checking */
+ u64 __iomem *ipath_kregend;
+ /* physical address of chip for io_remap, etc. */
+ unsigned long ipath_physaddr;
+ /* base of memory alloced for ipath_kregbase, for free */
+ u64 *ipath_kregalloc;
+ /* ipath_cfgports pointers */
+ struct ipath_portdata **ipath_pd;
+ /* sk_buffs used by port 0 eager receive queue */
+ struct ipath_skbinfo *ipath_port0_skbinfo;
+ /* kvirt address of 1st 2k pio buffer */
+ void __iomem *ipath_pio2kbase;
+ /* kvirt address of 1st 4k pio buffer */
+ void __iomem *ipath_pio4kbase;
+ /*
+ * points to area where PIOavail registers will be DMA'ed.
+ * Has to be on a page of it's own, because the page will be
+ * mapped into user program space. This copy is *ONLY* ever
+ * written by DMA, not by the driver! Need a copy per device
+ * when we get to multiple devices
+ */
+ volatile __le64 *ipath_pioavailregs_dma;
+ /* physical address where updates occur */
+ dma_addr_t ipath_pioavailregs_phys;
+ struct _ipath_layer ipath_layer;
+ /* setup intr */
+ int (*ipath_f_intrsetup)(struct ipath_devdata *);
+ /* fallback to alternate interrupt type if possible */
+ int (*ipath_f_intr_fallback)(struct ipath_devdata *);
+ /* setup on-chip bus config */
+ int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *);
+ /* hard reset chip */
+ int (*ipath_f_reset)(struct ipath_devdata *);
+ int (*ipath_f_get_boardname)(struct ipath_devdata *, char *,
+ size_t);
+ void (*ipath_f_init_hwerrors)(struct ipath_devdata *);
+ void (*ipath_f_handle_hwerrors)(struct ipath_devdata *, char *,
+ size_t);
+ void (*ipath_f_quiet_serdes)(struct ipath_devdata *);
+ int (*ipath_f_bringup_serdes)(struct ipath_devdata *);
+ int (*ipath_f_early_init)(struct ipath_devdata *);
+ void (*ipath_f_clear_tids)(struct ipath_devdata *, unsigned);
+ void (*ipath_f_put_tid)(struct ipath_devdata *, u64 __iomem*,
+ u32, unsigned long);
+ void (*ipath_f_tidtemplate)(struct ipath_devdata *);
+ void (*ipath_f_cleanup)(struct ipath_devdata *);
+ void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64);
+ /* fill out chip-specific fields */
+ int (*ipath_f_get_base_info)(struct ipath_portdata *, void *);
+ /* free irq */
+ void (*ipath_f_free_irq)(struct ipath_devdata *);
+ struct ipath_message_header *(*ipath_f_get_msgheader)
+ (struct ipath_devdata *, __le32 *);
+ void (*ipath_f_config_ports)(struct ipath_devdata *, ushort);
+ int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int);
+ int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32);
+ void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16);
+ void (*ipath_f_read_counters)(struct ipath_devdata *,
+ struct infinipath_counters *);
+ void (*ipath_f_xgxs_reset)(struct ipath_devdata *);
+ /* per chip actions needed for IB Link up/down changes */
+ int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
+
+ unsigned ipath_lastegr_idx;
+ struct ipath_ibdev *verbs_dev;
+ struct timer_list verbs_timer;
+ /* total dwords sent (summed from counter) */
+ u64 ipath_sword;
+ /* total dwords rcvd (summed from counter) */
+ u64 ipath_rword;
+ /* total packets sent (summed from counter) */
+ u64 ipath_spkts;
+ /* total packets rcvd (summed from counter) */
+ u64 ipath_rpkts;
+ /* ipath_statusp initially points to this. */
+ u64 _ipath_status;
+ /* GUID for this interface, in network order */
+ __be64 ipath_guid;
+ /*
+ * aggregrate of error bits reported since last cleared, for
+ * limiting of error reporting
+ */
+ ipath_err_t ipath_lasterror;
+ /*
+ * aggregrate of error bits reported since last cleared, for
+ * limiting of hwerror reporting
+ */
+ ipath_err_t ipath_lasthwerror;
+ /* errors masked because they occur too fast */
+ ipath_err_t ipath_maskederrs;
+ u64 ipath_lastlinkrecov; /* link recoveries at last ACTIVE */
+ /* these 5 fields are used to establish deltas for IB Symbol
+ * errors and linkrecovery errors. They can be reported on
+ * some chips during link negotiation prior to INIT, and with
+ * DDR when faking DDR negotiations with non-IBTA switches.
+ * The chip counters are adjusted at driver unload if there is
+ * a non-zero delta.
+ */
+ u64 ibdeltainprog;
+ u64 ibsymdelta;
+ u64 ibsymsnap;
+ u64 iblnkerrdelta;
+ u64 iblnkerrsnap;
+
+ /* time in jiffies at which to re-enable maskederrs */
+ unsigned long ipath_unmasktime;
+ /* count of egrfull errors, combined for all ports */
+ u64 ipath_last_tidfull;
+ /* for ipath_qcheck() */
+ u64 ipath_lastport0rcv_cnt;
+ /* template for writing TIDs */
+ u64 ipath_tidtemplate;
+ /* value to write to free TIDs */
+ u64 ipath_tidinvalid;
+ /* IBA6120 rcv interrupt setup */
+ u64 ipath_rhdrhead_intr_off;
+
+ /* size of memory at ipath_kregbase */
+ u32 ipath_kregsize;
+ /* number of registers used for pioavail */
+ u32 ipath_pioavregs;
+ /* IPATH_POLL, etc. */
+ u32 ipath_flags;
+ /* ipath_flags driver is waiting for */
+ u32 ipath_state_wanted;
+ /* last buffer for user use, first buf for kernel use is this
+ * index. */
+ u32 ipath_lastport_piobuf;
+ /* is a stats timer active */
+ u32 ipath_stats_timer_active;
+ /* number of interrupts for this device -- saturates... */
+ u32 ipath_int_counter;
+ /* dwords sent read from counter */
+ u32 ipath_lastsword;
+ /* dwords received read from counter */
+ u32 ipath_lastrword;
+ /* sent packets read from counter */
+ u32 ipath_lastspkts;
+ /* received packets read from counter */
+ u32 ipath_lastrpkts;
+ /* pio bufs allocated per port */
+ u32 ipath_pbufsport;
+ /* if remainder on bufs/port, ports < extrabuf get 1 extra */
+ u32 ipath_ports_extrabuf;
+ u32 ipath_pioupd_thresh; /* update threshold, some chips */
+ /*
+ * number of ports configured as max; zero is set to number chip
+ * supports, less gives more pio bufs/port, etc.
+ */
+ u32 ipath_cfgports;
+ /* count of port 0 hdrqfull errors */
+ u32 ipath_p0_hdrqfull;
+ /* port 0 number of receive eager buffers */
+ u32 ipath_p0_rcvegrcnt;
+
+ /*
+ * index of last piobuffer we used. Speeds up searching, by
+ * starting at this point. Doesn't matter if multiple cpu's use and
+ * update, last updater is only write that matters. Whenever it
+ * wraps, we update shadow copies. Need a copy per device when we
+ * get to multiple devices
+ */
+ u32 ipath_lastpioindex;
+ u32 ipath_lastpioindexl;
+ /* max length of freezemsg */
+ u32 ipath_freezelen;
+ /*
+ * consecutive times we wanted a PIO buffer but were unable to
+ * get one
+ */
+ u32 ipath_consec_nopiobuf;
+ /*
+ * hint that we should update ipath_pioavailshadow before
+ * looking for a PIO buffer
+ */
+ u32 ipath_upd_pio_shadow;
+ /* so we can rewrite it after a chip reset */
+ u32 ipath_pcibar0;
+ /* so we can rewrite it after a chip reset */
+ u32 ipath_pcibar1;
+ u32 ipath_x1_fix_tries;
+ u32 ipath_autoneg_tries;
+ u32 serdes_first_init_done;
+
+ struct ipath_relock {
+ atomic_t ipath_relock_timer_active;
+ struct timer_list ipath_relock_timer;
+ unsigned int ipath_relock_interval; /* in jiffies */
+ } ipath_relock_singleton;
+
+ /* interrupt number */
+ int ipath_irq;
+ /* HT/PCI Vendor ID (here for NodeInfo) */
+ u16 ipath_vendorid;
+ /* HT/PCI Device ID (here for NodeInfo) */
+ u16 ipath_deviceid;
+ /* offset in HT config space of slave/primary interface block */
+ u8 ipath_ht_slave_off;
+ /* for write combining settings */
+ int wc_cookie;
+ /* ref count for each pkey */
+ atomic_t ipath_pkeyrefs[4];
+ /* shadow copy of struct page *'s for exp tid pages */
+ struct page **ipath_pageshadow;
+ /* shadow copy of dma handles for exp tid pages */
+ dma_addr_t *ipath_physshadow;
+ u64 __iomem *ipath_egrtidbase;
+ /* lock to workaround chip bug 9437 and others */
+ spinlock_t ipath_kernel_tid_lock;
+ spinlock_t ipath_user_tid_lock;
+ spinlock_t ipath_sendctrl_lock;
+ /* around ipath_pd and (user ports) port_cnt use (intr vs free) */
+ spinlock_t ipath_uctxt_lock;
+
+ /*
+ * IPATH_STATUS_*,
+ * this address is mapped readonly into user processes so they can
+ * get status cheaply, whenever they want.
+ */
+ u64 *ipath_statusp;
+ /* freeze msg if hw error put chip in freeze */
+ char *ipath_freezemsg;
+ /* pci access data structure */
+ struct pci_dev *pcidev;
+ struct cdev *user_cdev;
+ struct cdev *diag_cdev;
+ struct device *user_dev;
+ struct device *diag_dev;
+ /* timer used to prevent stats overflow, error throttling, etc. */
+ struct timer_list ipath_stats_timer;
+ /* timer to verify interrupts work, and fallback if possible */
+ struct timer_list ipath_intrchk_timer;
+ void *ipath_dummy_hdrq; /* used after port close */
+ dma_addr_t ipath_dummy_hdrq_phys;
+
+ /* SendDMA related entries */
+ spinlock_t ipath_sdma_lock;
+ unsigned long ipath_sdma_status;
+ unsigned long ipath_sdma_abort_jiffies;
+ unsigned long ipath_sdma_abort_intr_timeout;
+ unsigned long ipath_sdma_buf_jiffies;
+ struct ipath_sdma_desc *ipath_sdma_descq;
+ u64 ipath_sdma_descq_added;
+ u64 ipath_sdma_descq_removed;
+ int ipath_sdma_desc_nreserved;
+ u16 ipath_sdma_descq_cnt;
+ u16 ipath_sdma_descq_tail;
+ u16 ipath_sdma_descq_head;
+ u16 ipath_sdma_next_intr;
+ u16 ipath_sdma_reset_wait;
+ u8 ipath_sdma_generation;
+ struct tasklet_struct ipath_sdma_abort_task;
+ struct tasklet_struct ipath_sdma_notify_task;
+ struct list_head ipath_sdma_activelist;
+ struct list_head ipath_sdma_notifylist;
+ atomic_t ipath_sdma_vl15_count;
+ struct timer_list ipath_sdma_vl15_timer;
+
+ dma_addr_t ipath_sdma_descq_phys;
+ volatile __le64 *ipath_sdma_head_dma;
+ dma_addr_t ipath_sdma_head_phys;
+
+ unsigned long ipath_ureg_align; /* user register alignment */
+
+ struct delayed_work ipath_autoneg_work;
+ wait_queue_head_t ipath_autoneg_wait;
+
+ /* HoL blocking / user app forward-progress state */
+ unsigned ipath_hol_state;
+ unsigned ipath_hol_next;
+ struct timer_list ipath_hol_timer;
+
+ /*
+ * Shadow copies of registers; size indicates read access size.
+ * Most of them are readonly, but some are write-only register,
+ * where we manipulate the bits in the shadow copy, and then write
+ * the shadow copy to infinipath.
+ *
+ * We deliberately make most of these 32 bits, since they have
+ * restricted range. For any that we read, we won't to generate 32
+ * bit accesses, since Opteron will generate 2 separate 32 bit HT
+ * transactions for a 64 bit read, and we want to avoid unnecessary
+ * HT transactions.
+ */
+
+ /* This is the 64 bit group */
+
+ /*
+ * shadow of pioavail, check to be sure it's large enough at
+ * init time.
+ */
+ unsigned long ipath_pioavailshadow[8];
+ /* bitmap of send buffers available for the kernel to use with PIO. */
+ unsigned long ipath_pioavailkernel[8];
+ /* shadow of kr_gpio_out, for rmw ops */
+ u64 ipath_gpio_out;
+ /* shadow the gpio mask register */
+ u64 ipath_gpio_mask;
+ /* shadow the gpio output enable, etc... */
+ u64 ipath_extctrl;
+ /* kr_revision shadow */
+ u64 ipath_revision;
+ /*
+ * shadow of ibcctrl, for interrupt handling of link changes,
+ * etc.
+ */
+ u64 ipath_ibcctrl;
+ /*
+ * last ibcstatus, to suppress "duplicate" status change messages,
+ * mostly from 2 to 3
+ */
+ u64 ipath_lastibcstat;
+ /* hwerrmask shadow */
+ ipath_err_t ipath_hwerrmask;
+ ipath_err_t ipath_errormask; /* errormask shadow */
+ /* interrupt config reg shadow */
+ u64 ipath_intconfig;
+ /* kr_sendpiobufbase value */
+ u64 ipath_piobufbase;
+ /* kr_ibcddrctrl shadow */
+ u64 ipath_ibcddrctrl;
+
+ /* these are the "32 bit" regs */
+
+ /*
+ * number of GUIDs in the flash for this interface; may need some
+ * rethinking for setting on other ifaces
+ */
+ u32 ipath_nguid;
+ /*
+ * the following two are 32-bit bitmasks, but {test,clear,set}_bit
+ * all expect bit fields to be "unsigned long"
+ */
+ /* shadow kr_rcvctrl */
+ unsigned long ipath_rcvctrl;
+ /* shadow kr_sendctrl */
+ unsigned long ipath_sendctrl;
+ /* to not count armlaunch after cancel */
+ unsigned long ipath_lastcancel;
+ /* count cases where special trigger was needed (double write) */
+ unsigned long ipath_spectriggerhit;
+
+ /* value we put in kr_rcvhdrcnt */
+ u32 ipath_rcvhdrcnt;
+ /* value we put in kr_rcvhdrsize */
+ u32 ipath_rcvhdrsize;
+ /* value we put in kr_rcvhdrentsize */
+ u32 ipath_rcvhdrentsize;
+ /* offset of last entry in rcvhdrq */
+ u32 ipath_hdrqlast;
+ /* kr_portcnt value */
+ u32 ipath_portcnt;
+ /* kr_pagealign value */
+ u32 ipath_palign;
+ /* number of "2KB" PIO buffers */
+ u32 ipath_piobcnt2k;
+ /* size in bytes of "2KB" PIO buffers */
+ u32 ipath_piosize2k;
+ /* number of "4KB" PIO buffers */
+ u32 ipath_piobcnt4k;
+ /* size in bytes of "4KB" PIO buffers */
+ u32 ipath_piosize4k;
+ u32 ipath_pioreserved; /* reserved special-inkernel; */
+ /* kr_rcvegrbase value */
+ u32 ipath_rcvegrbase;
+ /* kr_rcvegrcnt value */
+ u32 ipath_rcvegrcnt;
+ /* kr_rcvtidbase value */
+ u32 ipath_rcvtidbase;
+ /* kr_rcvtidcnt value */
+ u32 ipath_rcvtidcnt;
+ /* kr_sendregbase */
+ u32 ipath_sregbase;
+ /* kr_userregbase */
+ u32 ipath_uregbase;
+ /* kr_counterregbase */
+ u32 ipath_cregbase;
+ /* shadow the control register contents */
+ u32 ipath_control;
+ /* PCI revision register (HTC rev on FPGA) */
+ u32 ipath_pcirev;
+
+ /* chip address space used by 4k pio buffers */
+ u32 ipath_4kalign;
+ /* The MTU programmed for this unit */
+ u32 ipath_ibmtu;
+ /*
+ * The max size IB packet, included IB headers that we can send.
+ * Starts same as ipath_piosize, but is affected when ibmtu is
+ * changed, or by size of eager buffers
+ */
+ u32 ipath_ibmaxlen;
+ /*
+ * ibmaxlen at init time, limited by chip and by receive buffer
+ * size. Not changed after init.
+ */
+ u32 ipath_init_ibmaxlen;
+ /* size of each rcvegrbuffer */
+ u32 ipath_rcvegrbufsize;
+ /* localbus width (1, 2,4,8,16,32) from config space */
+ u32 ipath_lbus_width;
+ /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
+ u32 ipath_lbus_speed;
+ /*
+ * number of sequential ibcstatus change for polling active/quiet
+ * (i.e., link not coming up).
+ */
+ u32 ipath_ibpollcnt;
+ /* low and high portions of MSI capability/vector */
+ u32 ipath_msi_lo;
+ /* saved after PCIe init for restore after reset */
+ u32 ipath_msi_hi;
+ /* MSI data (vector) saved for restore */
+ u16 ipath_msi_data;
+ /* MLID programmed for this instance */
+ u16 ipath_mlid;
+ /* LID programmed for this instance */
+ u16 ipath_lid;
+ /* list of pkeys programmed; 0 if not set */
+ u16 ipath_pkeys[4];
+ /*
+ * ASCII serial number, from flash, large enough for original
+ * all digit strings, and longer QLogic serial number format
+ */
+ u8 ipath_serial[16];
+ /* human readable board version */
+ u8 ipath_boardversion[96];
+ u8 ipath_lbus_info[32]; /* human readable localbus info */
+ /* chip major rev, from ipath_revision */
+ u8 ipath_majrev;
+ /* chip minor rev, from ipath_revision */
+ u8 ipath_minrev;
+ /* board rev, from ipath_revision */
+ u8 ipath_boardrev;
+ /* saved for restore after reset */
+ u8 ipath_pci_cacheline;
+ /* LID mask control */
+ u8 ipath_lmc;
+ /* link width supported */
+ u8 ipath_link_width_supported;
+ /* link speed supported */
+ u8 ipath_link_speed_supported;
+ u8 ipath_link_width_enabled;
+ u8 ipath_link_speed_enabled;
+ u8 ipath_link_width_active;
+ u8 ipath_link_speed_active;
+ /* Rx Polarity inversion (compensate for ~tx on partner) */
+ u8 ipath_rx_pol_inv;
+
+ u8 ipath_r_portenable_shift;
+ u8 ipath_r_intravail_shift;
+ u8 ipath_r_tailupd_shift;
+ u8 ipath_r_portcfg_shift;
+
+ /* unit # of this chip, if present */
+ int ipath_unit;
+
+ /* local link integrity counter */
+ u32 ipath_lli_counter;
+ /* local link integrity errors */
+ u32 ipath_lli_errors;
+ /*
+ * Above counts only cases where _successive_ LocalLinkIntegrity
+ * errors were seen in the receive headers of kern-packets.
+ * Below are the three (monotonically increasing) counters
+ * maintained via GPIO interrupts on iba6120-rev2.
+ */
+ u32 ipath_rxfc_unsupvl_errs;
+ u32 ipath_overrun_thresh_errs;
+ u32 ipath_lli_errs;
+
+ /*
+ * Not all devices managed by a driver instance are the same
+ * type, so these fields must be per-device.
+ */
+ u64 ipath_i_bitsextant;
+ ipath_err_t ipath_e_bitsextant;
+ ipath_err_t ipath_hwe_bitsextant;
+
+ /*
+ * Below should be computable from number of ports,
+ * since they are never modified.
+ */
+ u64 ipath_i_rcvavail_mask;
+ u64 ipath_i_rcvurg_mask;
+ u16 ipath_i_rcvurg_shift;
+ u16 ipath_i_rcvavail_shift;
+
+ /*
+ * Register bits for selecting i2c direction and values, used for
+ * I2C serial flash.
+ */
+ u8 ipath_gpio_sda_num;
+ u8 ipath_gpio_scl_num;
+ u8 ipath_i2c_chain_type;
+ u64 ipath_gpio_sda;
+ u64 ipath_gpio_scl;
+
+ /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */
+ spinlock_t ipath_gpio_lock;
+
+ /*
+ * IB link and linktraining states and masks that vary per chip in
+ * some way. Set at init, to avoid each IB status change interrupt
+ */
+ u8 ibcs_ls_shift;
+ u8 ibcs_lts_mask;
+ u32 ibcs_mask;
+ u32 ib_init;
+ u32 ib_arm;
+ u32 ib_active;
+
+ u16 ipath_rhf_offset; /* offset of RHF within receive header entry */
+
+ /*
+ * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol
+ * reg. Changes for IBA7220
+ */
+ u8 ibcc_lic_mask; /* LinkInitCmd */
+ u8 ibcc_lc_shift; /* LinkCmd */
+ u8 ibcc_mpl_shift; /* Maxpktlen */
+
+ u8 delay_mult;
+
+ /* used to override LED behavior */
+ u8 ipath_led_override; /* Substituted for normal value, if non-zero */
+ u16 ipath_led_override_timeoff; /* delta to next timer event */
+ u8 ipath_led_override_vals[2]; /* Alternates per blink-frame */
+ u8 ipath_led_override_phase; /* Just counts, LSB picks from vals[] */
+ atomic_t ipath_led_override_timer_active;
+ /* Used to flash LEDs in override mode */
+ struct timer_list ipath_led_override_timer;
+
+ /* Support (including locks) for EEPROM logging of errors and time */
+ /* control access to actual counters, timer */
+ spinlock_t ipath_eep_st_lock;
+ /* control high-level access to EEPROM */
+ struct mutex ipath_eep_lock;
+ /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */
+ uint64_t ipath_traffic_wds;
+ /* active time is kept in seconds, but logged in hours */
+ atomic_t ipath_active_time;
+ /* Below are nominal shadow of EEPROM, new since last EEPROM update */
+ uint8_t ipath_eep_st_errs[IPATH_EEP_LOG_CNT];
+ uint8_t ipath_eep_st_new_errs[IPATH_EEP_LOG_CNT];
+ uint16_t ipath_eep_hrs;
+ /*
+ * masks for which bits of errs, hwerrs that cause
+ * each of the counters to increment.
+ */
+ struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT];
+
+ /* interrupt mitigation reload register info */
+ u16 ipath_jint_idle_ticks; /* idle clock ticks */
+ u16 ipath_jint_max_packets; /* max packets across all ports */
+
+ /*
+ * lock for access to SerDes, and flags to sequence preset
+ * versus steady-state. 7220-only at the moment.
+ */
+ spinlock_t ipath_sdepb_lock;
+ u8 ipath_presets_needed; /* Set if presets to be restored next DOWN */
+};
+
+/* ipath_hol_state values (stopping/starting user proc, send flushing) */
+#define IPATH_HOL_UP 0
+#define IPATH_HOL_DOWN 1
+/* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
+#define IPATH_HOL_DOWNSTOP 0
+#define IPATH_HOL_DOWNCONT 1
+
+/* bit positions for sdma_status */
+#define IPATH_SDMA_ABORTING 0
+#define IPATH_SDMA_DISARMED 1
+#define IPATH_SDMA_DISABLED 2
+#define IPATH_SDMA_LAYERBUF 3
+#define IPATH_SDMA_RUNNING 30
+#define IPATH_SDMA_SHUTDOWN 31
+
+/* bit combinations that correspond to abort states */
+#define IPATH_SDMA_ABORT_NONE 0
+#define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
+#define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED))
+#define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISABLED))
+#define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
+#define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
+
+#define IPATH_SDMA_BUF_NONE 0
+#define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
+
+/* Private data for file operations */
+struct ipath_filedata {
+ struct ipath_portdata *pd;
+ unsigned subport;
+ unsigned tidcursor;
+ struct ipath_user_sdma_queue *pq;
+};
+extern struct list_head ipath_dev_list;
+extern spinlock_t ipath_devs_lock;
+extern struct ipath_devdata *ipath_lookup(int unit);
+
+int ipath_init_chip(struct ipath_devdata *, int);
+int ipath_enable_wc(struct ipath_devdata *dd);
+void ipath_disable_wc(struct ipath_devdata *dd);
+int ipath_count_units(int *npresentp, int *nupp, int *maxportsp);
+void ipath_shutdown_device(struct ipath_devdata *);
+void ipath_clear_freeze(struct ipath_devdata *);
+
+struct file_operations;
+int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
+ struct cdev **cdevp, struct device **devp);
+void ipath_cdev_cleanup(struct cdev **cdevp,
+ struct device **devp);
+
+int ipath_diag_add(struct ipath_devdata *);
+void ipath_diag_remove(struct ipath_devdata *);
+
+extern wait_queue_head_t ipath_state_wait;
+
+int ipath_user_add(struct ipath_devdata *dd);
+void ipath_user_remove(struct ipath_devdata *dd);
+
+struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
+
+extern int ipath_diag_inuse;
+
+irqreturn_t ipath_intr(int irq, void *devid);
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+ ipath_err_t err);
+#if __IPATH_INFO || __IPATH_DBG
+extern const char *ipath_ibcstatus_str[];
+#endif
+
+/* clean up any per-chip chip-specific stuff */
+void ipath_chip_cleanup(struct ipath_devdata *);
+/* clean up any chip type-specific stuff */
+void ipath_chip_done(void);
+
+void ipath_disarm_piobufs(struct ipath_devdata *, unsigned first,
+ unsigned cnt);
+void ipath_cancel_sends(struct ipath_devdata *, int);
+
+int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
+void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
+
+int ipath_parse_ushort(const char *str, unsigned short *valp);
+
+void ipath_kreceive(struct ipath_portdata *);
+int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
+int ipath_reset_device(int);
+void ipath_get_faststats(unsigned long);
+int ipath_wait_linkstate(struct ipath_devdata *, u32, int);
+int ipath_set_linkstate(struct ipath_devdata *, u8);
+int ipath_set_mtu(struct ipath_devdata *, u16);
+int ipath_set_lid(struct ipath_devdata *, u32, u8);
+int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
+void ipath_enable_armlaunch(struct ipath_devdata *);
+void ipath_disable_armlaunch(struct ipath_devdata *);
+void ipath_hol_down(struct ipath_devdata *);
+void ipath_hol_up(struct ipath_devdata *);
+void ipath_hol_event(unsigned long);
+void ipath_toggle_rclkrls(struct ipath_devdata *);
+void ipath_sd7220_clr_ibpar(struct ipath_devdata *);
+void ipath_set_relock_poll(struct ipath_devdata *, int);
+void ipath_shutdown_relock_poll(struct ipath_devdata *);
+
+/* for use in system calls, where we want to know device type, etc. */
+#define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
+#define subport_fp(fp) \
+ ((struct ipath_filedata *)(fp)->private_data)->subport
+#define tidcursor_fp(fp) \
+ ((struct ipath_filedata *)(fp)->private_data)->tidcursor
+#define user_sdma_queue_fp(fp) \
+ ((struct ipath_filedata *)(fp)->private_data)->pq
+
+/*
+ * values for ipath_flags
+ */
+ /* chip can report link latency (IB 1.2) */
+#define IPATH_HAS_LINK_LATENCY 0x1
+ /* The chip is up and initted */
+#define IPATH_INITTED 0x2
+ /* set if any user code has set kr_rcvhdrsize */
+#define IPATH_RCVHDRSZ_SET 0x4
+ /* The chip is present and valid for accesses */
+#define IPATH_PRESENT 0x8
+ /* HT link0 is only 8 bits wide, ignore upper byte crc
+ * errors, etc. */
+#define IPATH_8BIT_IN_HT0 0x10
+ /* HT link1 is only 8 bits wide, ignore upper byte crc
+ * errors, etc. */
+#define IPATH_8BIT_IN_HT1 0x20
+ /* The link is down */
+#define IPATH_LINKDOWN 0x40
+ /* The link level is up (0x11) */
+#define IPATH_LINKINIT 0x80
+ /* The link is in the armed (0x21) state */
+#define IPATH_LINKARMED 0x100
+ /* The link is in the active (0x31) state */
+#define IPATH_LINKACTIVE 0x200
+ /* link current state is unknown */
+#define IPATH_LINKUNK 0x400
+ /* Write combining flush needed for PIO */
+#define IPATH_PIO_FLUSH_WC 0x1000
+ /* DMA Receive tail pointer */
+#define IPATH_NODMA_RTAIL 0x2000
+ /* no IB cable, or no device on IB cable */
+#define IPATH_NOCABLE 0x4000
+ /* Supports port zero per packet receive interrupts via
+ * GPIO */
+#define IPATH_GPIO_INTR 0x8000
+ /* uses the coded 4byte TID, not 8 byte */
+#define IPATH_4BYTE_TID 0x10000
+ /* packet/word counters are 32 bit, else those 4 counters
+ * are 64bit */
+#define IPATH_32BITCOUNTERS 0x20000
+ /* Interrupt register is 64 bits */
+#define IPATH_INTREG_64 0x40000
+ /* can miss port0 rx interrupts */
+#define IPATH_DISABLED 0x80000 /* administratively disabled */
+ /* Use GPIO interrupts for new counters */
+#define IPATH_GPIO_ERRINTRS 0x100000
+#define IPATH_SWAP_PIOBUFS 0x200000
+ /* Supports Send DMA */
+#define IPATH_HAS_SEND_DMA 0x400000
+ /* Supports Send Count (not just word count) in PBC */
+#define IPATH_HAS_PBC_CNT 0x800000
+ /* Suppress heartbeat, even if turning off loopback */
+#define IPATH_NO_HRTBT 0x1000000
+#define IPATH_HAS_THRESH_UPDATE 0x4000000
+#define IPATH_HAS_MULT_IB_SPEED 0x8000000
+#define IPATH_IB_AUTONEG_INPROG 0x10000000
+#define IPATH_IB_AUTONEG_FAILED 0x20000000
+ /* Linkdown-disable intentionally, Do not attempt to bring up */
+#define IPATH_IB_LINK_DISABLED 0x40000000
+#define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
+
+/* Bits in GPIO for the added interrupts */
+#define IPATH_GPIO_PORT0_BIT 2
+#define IPATH_GPIO_RXUVL_BIT 3
+#define IPATH_GPIO_OVRUN_BIT 4
+#define IPATH_GPIO_LLI_BIT 5
+#define IPATH_GPIO_ERRINTR_MASK 0x38
+
+/* portdata flag bit offsets */
+ /* waiting for a packet to arrive */
+#define IPATH_PORT_WAITING_RCV 2
+ /* master has not finished initializing */
+#define IPATH_PORT_MASTER_UNINIT 4
+ /* waiting for an urgent packet to arrive */
+#define IPATH_PORT_WAITING_URG 5
+
+/* free up any allocated data at closes */
+void ipath_free_data(struct ipath_portdata *dd);
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
+void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
+ unsigned len, int avail);
+void ipath_init_iba6110_funcs(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
+int ipath_update_eeprom_log(struct ipath_devdata *dd);
+void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
+u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
+void ipath_disarm_senderrbufs(struct ipath_devdata *);
+void ipath_force_pio_avail_update(struct ipath_devdata *);
+void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
+
+/*
+ * Set LED override, only the two LSBs have "public" meaning, but
+ * any non-zero value substitutes them for the Link and LinkTrain
+ * LED states.
+ */
+#define IPATH_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
+#define IPATH_LED_LOG 2 /* Logical (link) YELLOW LED */
+void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
+
+/* send dma routines */
+int setup_sdma(struct ipath_devdata *);
+void teardown_sdma(struct ipath_devdata *);
+void ipath_restart_sdma(struct ipath_devdata *);
+void ipath_sdma_intr(struct ipath_devdata *);
+int ipath_sdma_verbs_send(struct ipath_devdata *, struct ipath_sge_state *,
+ u32, struct ipath_verbs_txreq *);
+/* ipath_sdma_lock should be locked before calling this. */
+int ipath_sdma_make_progress(struct ipath_devdata *dd);
+
+/* must be called under ipath_sdma_lock */
+static inline u16 ipath_sdma_descq_freecnt(const struct ipath_devdata *dd)
+{
+ return dd->ipath_sdma_descq_cnt -
+ (dd->ipath_sdma_descq_added - dd->ipath_sdma_descq_removed) -
+ 1 - dd->ipath_sdma_desc_nreserved;
+}
+
+static inline void ipath_sdma_desc_reserve(struct ipath_devdata *dd, u16 cnt)
+{
+ dd->ipath_sdma_desc_nreserved += cnt;
+}
+
+static inline void ipath_sdma_desc_unreserve(struct ipath_devdata *dd, u16 cnt)
+{
+ dd->ipath_sdma_desc_nreserved -= cnt;
+}
+
+/*
+ * number of words used for protocol header if not set by ipath_userinit();
+ */
+#define IPATH_DFLT_RCVHDRSIZE 9
+
+int ipath_get_user_pages(unsigned long, size_t, struct page **);
+void ipath_release_user_pages(struct page **, size_t);
+void ipath_release_user_pages_on_close(struct page **, size_t);
+int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
+int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
+int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
+int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
+
+/* these are used for the registers that vary with port */
+void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
+ unsigned, u64);
+
+/*
+ * We could have a single register get/put routine, that takes a group type,
+ * but this is somewhat clearer and cleaner. It also gives us some error
+ * checking. 64 bit register reads should always work, but are inefficient
+ * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
+ * so we use kreg32 wherever possible. User register and counter register
+ * reads are always 32 bit reads, so only one form of those routines.
+ */
+
+/*
+ * At the moment, none of the s-registers are writable, so no
+ * ipath_write_sreg().
+ */
+
+/**
+ * ipath_read_ureg32 - read 32-bit virtualized per-port register
+ * @dd: device
+ * @regno: register number
+ * @port: port number
+ *
+ * Return the contents of a register that is virtualized to be per port.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
+ */
+static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
+ ipath_ureg regno, int port)
+{
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
+ return 0;
+
+ return readl(regno + (u64 __iomem *)
+ (dd->ipath_uregbase +
+ (char __iomem *)dd->ipath_kregbase +
+ dd->ipath_ureg_align * port));
+}
+
+/**
+ * ipath_write_ureg - write 32-bit virtualized per-port register
+ * @dd: device
+ * @regno: register number
+ * @value: value
+ * @port: port
+ *
+ * Write the contents of a register that is virtualized to be per port.
+ */
+static inline void ipath_write_ureg(const struct ipath_devdata *dd,
+ ipath_ureg regno, u64 value, int port)
+{
+ u64 __iomem *ubase = (u64 __iomem *)
+ (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase +
+ dd->ipath_ureg_align * port);
+ if (dd->ipath_kregbase)
+ writeq(value, &ubase[regno]);
+}
+
+static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
+ ipath_kreg regno)
+{
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
+ return -1;
+ return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
+}
+
+static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
+ ipath_kreg regno)
+{
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
+ return -1;
+
+ return readq(&dd->ipath_kregbase[regno]);
+}
+
+static inline void ipath_write_kreg(const struct ipath_devdata *dd,
+ ipath_kreg regno, u64 value)
+{
+ if (dd->ipath_kregbase)
+ writeq(value, &dd->ipath_kregbase[regno]);
+}
+
+static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
+ ipath_sreg regno)
+{
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
+ return 0;
+
+ return readq(regno + (u64 __iomem *)
+ (dd->ipath_cregbase +
+ (char __iomem *)dd->ipath_kregbase));
+}
+
+static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
+ ipath_sreg regno)
+{
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
+ return 0;
+ return readl(regno + (u64 __iomem *)
+ (dd->ipath_cregbase +
+ (char __iomem *)dd->ipath_kregbase));
+}
+
+static inline void ipath_write_creg(const struct ipath_devdata *dd,
+ ipath_creg regno, u64 value)
+{
+ if (dd->ipath_kregbase)
+ writeq(value, regno + (u64 __iomem *)
+ (dd->ipath_cregbase +
+ (char __iomem *)dd->ipath_kregbase));
+}
+
+static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
+{
+ *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
+}
+
+static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
+{
+ return (u32) le64_to_cpu(*((volatile __le64 *)
+ pd->port_rcvhdrtail_kvaddr));
+}
+
+static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
+{
+ const struct ipath_devdata *dd = pd->port_dd;
+ u32 hdrqtail;
+
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ __le32 *rhf_addr;
+ u32 seq;
+
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ pd->port_head + dd->ipath_rhf_offset;
+ seq = ipath_hdrget_seq(rhf_addr);
+ hdrqtail = pd->port_head;
+ if (seq == pd->port_seq_cnt)
+ hdrqtail++;
+ } else
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+
+ return hdrqtail;
+}
+
+static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
+{
+ return (dd->ipath_flags & IPATH_INTREG_64) ?
+ ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r);
+}
+
+/*
+ * from contents of IBCStatus (or a saved copy), return linkstate
+ * Report ACTIVE_DEFER as ACTIVE, because we treat them the same
+ * everywhere, anyway (and should be, for almost all purposes).
+ */
+static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
+{
+ u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) &
+ INFINIPATH_IBCS_LINKSTATE_MASK;
+ if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER)
+ state = INFINIPATH_IBCS_L_STATE_ACTIVE;
+ return state;
+}
+
+/* from contents of IBCStatus (or a saved copy), return linktrainingstate */
+static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs)
+{
+ return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+ dd->ibcs_lts_mask;
+}
+
+/*
+ * from contents of IBCStatus (or a saved copy), return logical link state
+ * combination of link state and linktraining state (down, active, init,
+ * arm, etc.
+ */
+static inline u32 ipath_ib_state(struct ipath_devdata *dd, u64 ibcs)
+{
+ u32 ibs;
+ ibs = (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+ dd->ibcs_lts_mask;
+ ibs |= (u32)(ibcs &
+ (INFINIPATH_IBCS_LINKSTATE_MASK << dd->ibcs_ls_shift));
+ return ibs;
+}
+
+/*
+ * sysfs interface.
+ */
+
+struct device_driver;
+
+extern const char ib_ipath_version[];
+
+extern const struct attribute_group *ipath_driver_attr_groups[];
+
+int ipath_device_create_group(struct device *, struct ipath_devdata *);
+void ipath_device_remove_group(struct device *, struct ipath_devdata *);
+int ipath_expose_reset(struct device *);
+
+int ipath_init_ipathfs(void);
+void ipath_exit_ipathfs(void);
+int ipathfs_add_device(struct ipath_devdata *);
+int ipathfs_remove_device(struct ipath_devdata *);
+
+/*
+ * dma_addr wrappers - all 0's invalid for hw
+ */
+dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
+ size_t, int);
+dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
+const char *ipath_get_unit_name(int unit);
+
+/*
+ * Flush write combining store buffers (if present) and perform a write
+ * barrier.
+ */
+#if defined(CONFIG_X86_64)
+#define ipath_flush_wc() asm volatile("sfence" ::: "memory")
+#else
+#define ipath_flush_wc() wmb()
+#endif
+
+extern unsigned ipath_debug; /* debugging bit mask */
+extern unsigned ipath_linkrecovery;
+extern unsigned ipath_mtu4096;
+extern struct mutex ipath_mutex;
+
+#define IPATH_DRV_NAME "ib_ipath"
+#define IPATH_MAJOR 233
+#define IPATH_USER_MINOR_BASE 0
+#define IPATH_DIAGPKT_MINOR 127
+#define IPATH_DIAG_MINOR_BASE 129
+#define IPATH_NMINORS 255
+
+#define ipath_dev_err(dd,fmt,...) \
+ do { \
+ const struct ipath_devdata *__dd = (dd); \
+ if (__dd->pcidev) \
+ dev_err(&__dd->pcidev->dev, "%s: " fmt, \
+ ipath_get_unit_name(__dd->ipath_unit), \
+ ##__VA_ARGS__); \
+ else \
+ printk(KERN_ERR IPATH_DRV_NAME ": %s: " fmt, \
+ ipath_get_unit_name(__dd->ipath_unit), \
+ ##__VA_ARGS__); \
+ } while (0)
+
+#if _IPATH_DEBUGGING
+
+# define __IPATH_DBG_WHICH(which,fmt,...) \
+ do { \
+ if (unlikely(ipath_debug & (which))) \
+ printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
+ __func__,##__VA_ARGS__); \
+ } while(0)
+
+# define ipath_dbg(fmt,...) \
+ __IPATH_DBG_WHICH(__IPATH_DBG,fmt,##__VA_ARGS__)
+# define ipath_cdbg(which,fmt,...) \
+ __IPATH_DBG_WHICH(__IPATH_##which##DBG,fmt,##__VA_ARGS__)
+
+#else /* ! _IPATH_DEBUGGING */
+
+# define ipath_dbg(fmt,...)
+# define ipath_cdbg(which,fmt,...)
+
+#endif /* _IPATH_DEBUGGING */
+
+/*
+ * this is used for formatting hw error messages...
+ */
+struct ipath_hwerror_msgs {
+ u64 mask;
+ const char *msg;
+};
+
+#define INFINIPATH_HWE_MSG(a, b) { .mask = INFINIPATH_HWE_##a, .msg = b }
+
+/* in ipath_intr.c... */
+void ipath_format_hwerrors(u64 hwerrs,
+ const struct ipath_hwerror_msgs *hwerrmsgs,
+ size_t nhwerrmsgs,
+ char *msg, size_t lmsg);
+
+#endif /* _IPATH_KERNEL_H */
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <asm/io.h>
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+/**
+ * ipath_alloc_lkey - allocate an lkey
+ * @rkt: lkey table in which to allocate the lkey
+ * @mr: memory region that this lkey protects
+ *
+ * Returns 1 if successful, otherwise returns 0.
+ */
+
+int ipath_alloc_lkey(struct ipath_lkey_table *rkt, struct ipath_mregion *mr)
+{
+ unsigned long flags;
+ u32 r;
+ u32 n;
+ int ret;
+
+ spin_lock_irqsave(&rkt->lock, flags);
+
+ /* Find the next available LKEY */
+ r = n = rkt->next;
+ for (;;) {
+ if (rkt->table[r] == NULL)
+ break;
+ r = (r + 1) & (rkt->max - 1);
+ if (r == n) {
+ spin_unlock_irqrestore(&rkt->lock, flags);
+ ipath_dbg("LKEY table full\n");
+ ret = 0;
+ goto bail;
+ }
+ }
+ rkt->next = (r + 1) & (rkt->max - 1);
+ /*
+ * Make sure lkey is never zero which is reserved to indicate an
+ * unrestricted LKEY.
+ */
+ rkt->gen++;
+ mr->lkey = (r << (32 - ib_ipath_lkey_table_size)) |
+ ((((1 << (24 - ib_ipath_lkey_table_size)) - 1) & rkt->gen)
+ << 8);
+ if (mr->lkey == 0) {
+ mr->lkey |= 1 << 8;
+ rkt->gen++;
+ }
+ rkt->table[r] = mr;
+ spin_unlock_irqrestore(&rkt->lock, flags);
+
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_free_lkey - free an lkey
+ * @rkt: table from which to free the lkey
+ * @lkey: lkey id to free
+ */
+void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey)
+{
+ unsigned long flags;
+ u32 r;
+
+ if (lkey == 0)
+ return;
+ r = lkey >> (32 - ib_ipath_lkey_table_size);
+ spin_lock_irqsave(&rkt->lock, flags);
+ rkt->table[r] = NULL;
+ spin_unlock_irqrestore(&rkt->lock, flags);
+}
+
+/**
+ * ipath_lkey_ok - check IB SGE for validity and initialize
+ * @rkt: table containing lkey to check SGE against
+ * @isge: outgoing internal SGE
+ * @sge: SGE to check
+ * @acc: access flags
+ *
+ * Return 1 if valid and successful, otherwise returns 0.
+ *
+ * Check the IB SGE for validity and initialize our internal version
+ * of it.
+ */
+int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
+ struct ib_sge *sge, int acc)
+{
+ struct ipath_lkey_table *rkt = &to_idev(qp->ibqp.device)->lk_table;
+ struct ipath_mregion *mr;
+ unsigned n, m;
+ size_t off;
+ int ret;
+
+ /*
+ * We use LKEY == zero for kernel virtual addresses
+ * (see ipath_get_dma_mr and ipath_dma.c).
+ */
+ if (sge->lkey == 0) {
+ /* always a kernel port, no locking needed */
+ struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
+
+ if (pd->user) {
+ ret = 0;
+ goto bail;
+ }
+ isge->mr = NULL;
+ isge->vaddr = (void *) sge->addr;
+ isge->length = sge->length;
+ isge->sge_length = sge->length;
+ ret = 1;
+ goto bail;
+ }
+ mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
+ if (unlikely(mr == NULL || mr->lkey != sge->lkey ||
+ qp->ibqp.pd != mr->pd)) {
+ ret = 0;
+ goto bail;
+ }
+
+ off = sge->addr - mr->user_base;
+ if (unlikely(sge->addr < mr->user_base ||
+ off + sge->length > mr->length ||
+ (mr->access_flags & acc) != acc)) {
+ ret = 0;
+ goto bail;
+ }
+
+ off += mr->offset;
+ m = 0;
+ n = 0;
+ while (off >= mr->map[m]->segs[n].length) {
+ off -= mr->map[m]->segs[n].length;
+ n++;
+ if (n >= IPATH_SEGSZ) {
+ m++;
+ n = 0;
+ }
+ }
+ isge->mr = mr;
+ isge->vaddr = mr->map[m]->segs[n].vaddr + off;
+ isge->length = mr->map[m]->segs[n].length - off;
+ isge->sge_length = sge->length;
+ isge->m = m;
+ isge->n = n;
+
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_rkey_ok - check the IB virtual address, length, and RKEY
+ * @dev: infiniband device
+ * @ss: SGE state
+ * @len: length of data
+ * @vaddr: virtual address to place data
+ * @rkey: rkey to check
+ * @acc: access flags
+ *
+ * Return 1 if successful, otherwise 0.
+ */
+int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
+ u32 len, u64 vaddr, u32 rkey, int acc)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_lkey_table *rkt = &dev->lk_table;
+ struct ipath_sge *sge = &ss->sge;
+ struct ipath_mregion *mr;
+ unsigned n, m;
+ size_t off;
+ int ret;
+
+ /*
+ * We use RKEY == zero for kernel virtual addresses
+ * (see ipath_get_dma_mr and ipath_dma.c).
+ */
+ if (rkey == 0) {
+ /* always a kernel port, no locking needed */
+ struct ipath_pd *pd = to_ipd(qp->ibqp.pd);
+
+ if (pd->user) {
+ ret = 0;
+ goto bail;
+ }
+ sge->mr = NULL;
+ sge->vaddr = (void *) vaddr;
+ sge->length = len;
+ sge->sge_length = len;
+ ss->sg_list = NULL;
+ ss->num_sge = 1;
+ ret = 1;
+ goto bail;
+ }
+
+ mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
+ if (unlikely(mr == NULL || mr->lkey != rkey ||
+ qp->ibqp.pd != mr->pd)) {
+ ret = 0;
+ goto bail;
+ }
+
+ off = vaddr - mr->iova;
+ if (unlikely(vaddr < mr->iova || off + len > mr->length ||
+ (mr->access_flags & acc) == 0)) {
+ ret = 0;
+ goto bail;
+ }
+
+ off += mr->offset;
+ m = 0;
+ n = 0;
+ while (off >= mr->map[m]->segs[n].length) {
+ off -= mr->map[m]->segs[n].length;
+ n++;
+ if (n >= IPATH_SEGSZ) {
+ m++;
+ n = 0;
+ }
+ }
+ sge->mr = mr;
+ sge->vaddr = mr->map[m]->segs[n].vaddr + off;
+ sge->length = mr->map[m]->segs[n].length - off;
+ sge->sge_length = len;
+ sge->m = m;
+ sge->n = n;
+ ss->sg_list = NULL;
+ ss->num_sge = 1;
+
+ ret = 1;
+
+bail:
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <rdma/ib_smi.h>
+#include <rdma/ib_pma.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004)
+#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008)
+#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C)
+#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C)
+
+static int reply(struct ib_smp *smp)
+{
+ /*
+ * The verbs framework will handle the directed/LID route
+ * packet changes.
+ */
+ smp->method = IB_MGMT_METHOD_GET_RESP;
+ if (smp->mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)
+ smp->status |= IB_SMP_DIRECTION;
+ return IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY;
+}
+
+static int recv_subn_get_nodedescription(struct ib_smp *smp,
+ struct ib_device *ibdev)
+{
+ if (smp->attr_mod)
+ smp->status |= IB_SMP_INVALID_FIELD;
+
+ memcpy(smp->data, ibdev->node_desc, sizeof(smp->data));
+
+ return reply(smp);
+}
+
+struct nodeinfo {
+ u8 base_version;
+ u8 class_version;
+ u8 node_type;
+ u8 num_ports;
+ __be64 sys_guid;
+ __be64 node_guid;
+ __be64 port_guid;
+ __be16 partition_cap;
+ __be16 device_id;
+ __be32 revision;
+ u8 local_port_num;
+ u8 vendor_id[3];
+} __attribute__ ((packed));
+
+static int recv_subn_get_nodeinfo(struct ib_smp *smp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct nodeinfo *nip = (struct nodeinfo *)&smp->data;
+ struct ipath_devdata *dd = to_idev(ibdev)->dd;
+ u32 vendor, majrev, minrev;
+
+ /* GUID 0 is illegal */
+ if (smp->attr_mod || (dd->ipath_guid == 0))
+ smp->status |= IB_SMP_INVALID_FIELD;
+
+ nip->base_version = 1;
+ nip->class_version = 1;
+ nip->node_type = 1; /* channel adapter */
+ /*
+ * XXX The num_ports value will need a layer function to get
+ * the value if we ever have more than one IB port on a chip.
+ * We will also need to get the GUID for the port.
+ */
+ nip->num_ports = ibdev->phys_port_cnt;
+ /* This is already in network order */
+ nip->sys_guid = to_idev(ibdev)->sys_image_guid;
+ nip->node_guid = dd->ipath_guid;
+ nip->port_guid = dd->ipath_guid;
+ nip->partition_cap = cpu_to_be16(ipath_get_npkeys(dd));
+ nip->device_id = cpu_to_be16(dd->ipath_deviceid);
+ majrev = dd->ipath_majrev;
+ minrev = dd->ipath_minrev;
+ nip->revision = cpu_to_be32((majrev << 16) | minrev);
+ nip->local_port_num = port;
+ vendor = dd->ipath_vendorid;
+ nip->vendor_id[0] = IPATH_SRC_OUI_1;
+ nip->vendor_id[1] = IPATH_SRC_OUI_2;
+ nip->vendor_id[2] = IPATH_SRC_OUI_3;
+
+ return reply(smp);
+}
+
+static int recv_subn_get_guidinfo(struct ib_smp *smp,
+ struct ib_device *ibdev)
+{
+ u32 startgx = 8 * be32_to_cpu(smp->attr_mod);
+ __be64 *p = (__be64 *) smp->data;
+
+ /* 32 blocks of 8 64-bit GUIDs per block */
+
+ memset(smp->data, 0, sizeof(smp->data));
+
+ /*
+ * We only support one GUID for now. If this changes, the
+ * portinfo.guid_cap field needs to be updated too.
+ */
+ if (startgx == 0) {
+ __be64 g = to_idev(ibdev)->dd->ipath_guid;
+ if (g == 0)
+ /* GUID 0 is illegal */
+ smp->status |= IB_SMP_INVALID_FIELD;
+ else
+ /* The first is a copy of the read-only HW GUID. */
+ *p = g;
+ } else
+ smp->status |= IB_SMP_INVALID_FIELD;
+
+ return reply(smp);
+}
+
+static void set_link_width_enabled(struct ipath_devdata *dd, u32 w)
+{
+ (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, w);
+}
+
+static void set_link_speed_enabled(struct ipath_devdata *dd, u32 s)
+{
+ (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, s);
+}
+
+static int get_overrunthreshold(struct ipath_devdata *dd)
+{
+ return (dd->ipath_ibcctrl >>
+ INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
+}
+
+/**
+ * set_overrunthreshold - set the overrun threshold
+ * @dd: the infinipath device
+ * @n: the new threshold
+ *
+ * Note that this will only take effect when the link state changes.
+ */
+static int set_overrunthreshold(struct ipath_devdata *dd, unsigned n)
+{
+ unsigned v;
+
+ v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK;
+ if (v != n) {
+ dd->ipath_ibcctrl &=
+ ~(INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK <<
+ INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT);
+ dd->ipath_ibcctrl |=
+ (u64) n << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ }
+ return 0;
+}
+
+static int get_phyerrthreshold(struct ipath_devdata *dd)
+{
+ return (dd->ipath_ibcctrl >>
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
+}
+
+/**
+ * set_phyerrthreshold - set the physical error threshold
+ * @dd: the infinipath device
+ * @n: the new threshold
+ *
+ * Note that this will only take effect when the link state changes.
+ */
+static int set_phyerrthreshold(struct ipath_devdata *dd, unsigned n)
+{
+ unsigned v;
+
+ v = (dd->ipath_ibcctrl >> INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;
+ if (v != n) {
+ dd->ipath_ibcctrl &=
+ ~(INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK <<
+ INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT);
+ dd->ipath_ibcctrl |=
+ (u64) n << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ }
+ return 0;
+}
+
+/**
+ * get_linkdowndefaultstate - get the default linkdown state
+ * @dd: the infinipath device
+ *
+ * Returns zero if the default is POLL, 1 if the default is SLEEP.
+ */
+static int get_linkdowndefaultstate(struct ipath_devdata *dd)
+{
+ return !!(dd->ipath_ibcctrl & INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE);
+}
+
+static int recv_subn_get_portinfo(struct ib_smp *smp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ipath_ibdev *dev;
+ struct ipath_devdata *dd;
+ struct ib_port_info *pip = (struct ib_port_info *)smp->data;
+ u16 lid;
+ u8 ibcstat;
+ u8 mtu;
+ int ret;
+
+ if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt) {
+ smp->status |= IB_SMP_INVALID_FIELD;
+ ret = reply(smp);
+ goto bail;
+ }
+
+ dev = to_idev(ibdev);
+ dd = dev->dd;
+
+ /* Clear all fields. Only set the non-zero fields. */
+ memset(smp->data, 0, sizeof(smp->data));
+
+ /* Only return the mkey if the protection field allows it. */
+ if (smp->method == IB_MGMT_METHOD_SET || dev->mkey == smp->mkey ||
+ dev->mkeyprot == 0)
+ pip->mkey = dev->mkey;
+ pip->gid_prefix = dev->gid_prefix;
+ lid = dd->ipath_lid;
+ pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE;
+ pip->sm_lid = cpu_to_be16(dev->sm_lid);
+ pip->cap_mask = cpu_to_be32(dev->port_cap_flags);
+ /* pip->diag_code; */
+ pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period);
+ pip->local_port_num = port;
+ pip->link_width_enabled = dd->ipath_link_width_enabled;
+ pip->link_width_supported = dd->ipath_link_width_supported;
+ pip->link_width_active = dd->ipath_link_width_active;
+ pip->linkspeed_portstate = dd->ipath_link_speed_supported << 4;
+ ibcstat = dd->ipath_lastibcstat;
+ /* map LinkState to IB portinfo values. */
+ pip->linkspeed_portstate |= ipath_ib_linkstate(dd, ibcstat) + 1;
+
+ pip->portphysstate_linkdown =
+ (ipath_cvt_physportstate[ibcstat & dd->ibcs_lts_mask] << 4) |
+ (get_linkdowndefaultstate(dd) ? 1 : 2);
+ pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dd->ipath_lmc;
+ pip->linkspeedactive_enabled = (dd->ipath_link_speed_active << 4) |
+ dd->ipath_link_speed_enabled;
+ switch (dd->ipath_ibmtu) {
+ case 4096:
+ mtu = IB_MTU_4096;
+ break;
+ case 2048:
+ mtu = IB_MTU_2048;
+ break;
+ case 1024:
+ mtu = IB_MTU_1024;
+ break;
+ case 512:
+ mtu = IB_MTU_512;
+ break;
+ case 256:
+ mtu = IB_MTU_256;
+ break;
+ default: /* oops, something is wrong */
+ mtu = IB_MTU_2048;
+ break;
+ }
+ pip->neighbormtu_mastersmsl = (mtu << 4) | dev->sm_sl;
+ pip->vlcap_inittype = 0x10; /* VLCap = VL0, InitType = 0 */
+ pip->vl_high_limit = dev->vl_high_limit;
+ /* pip->vl_arb_high_cap; // only one VL */
+ /* pip->vl_arb_low_cap; // only one VL */
+ /* InitTypeReply = 0 */
+ /* our mtu cap depends on whether 4K MTU enabled or not */
+ pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
+ /* HCAs ignore VLStallCount and HOQLife */
+ /* pip->vlstallcnt_hoqlife; */
+ pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
+ pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
+ /* P_KeyViolations are counted by hardware. */
+ pip->pkey_violations =
+ cpu_to_be16((ipath_get_cr_errpkey(dd) -
+ dev->z_pkey_violations) & 0xFFFF);
+ pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
+ /* Only the hardware GUID is supported for now */
+ pip->guid_cap = 1;
+ pip->clientrereg_resv_subnetto = dev->subnet_timeout;
+ /* 32.768 usec. response time (guessing) */
+ pip->resv_resptimevalue = 3;
+ pip->localphyerrors_overrunerrors =
+ (get_phyerrthreshold(dd) << 4) |
+ get_overrunthreshold(dd);
+ /* pip->max_credit_hint; */
+ if (dev->port_cap_flags & IB_PORT_LINK_LATENCY_SUP) {
+ u32 v;
+
+ v = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LINKLATENCY);
+ pip->link_roundtrip_latency[0] = v >> 16;
+ pip->link_roundtrip_latency[1] = v >> 8;
+ pip->link_roundtrip_latency[2] = v;
+ }
+
+ ret = reply(smp);
+
+bail:
+ return ret;
+}
+
+/**
+ * get_pkeys - return the PKEY table for port 0
+ * @dd: the infinipath device
+ * @pkeys: the pkey table is placed here
+ */
+static int get_pkeys(struct ipath_devdata *dd, u16 * pkeys)
+{
+ /* always a kernel port, no locking needed */
+ struct ipath_portdata *pd = dd->ipath_pd[0];
+
+ memcpy(pkeys, pd->port_pkeys, sizeof(pd->port_pkeys));
+
+ return 0;
+}
+
+static int recv_subn_get_pkeytable(struct ib_smp *smp,
+ struct ib_device *ibdev)
+{
+ u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
+ u16 *p = (u16 *) smp->data;
+ __be16 *q = (__be16 *) smp->data;
+
+ /* 64 blocks of 32 16-bit P_Key entries */
+
+ memset(smp->data, 0, sizeof(smp->data));
+ if (startpx == 0) {
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ unsigned i, n = ipath_get_npkeys(dev->dd);
+
+ get_pkeys(dev->dd, p);
+
+ for (i = 0; i < n; i++)
+ q[i] = cpu_to_be16(p[i]);
+ } else
+ smp->status |= IB_SMP_INVALID_FIELD;
+
+ return reply(smp);
+}
+
+static int recv_subn_set_guidinfo(struct ib_smp *smp,
+ struct ib_device *ibdev)
+{
+ /* The only GUID we support is the first read-only entry. */
+ return recv_subn_get_guidinfo(smp, ibdev);
+}
+
+/**
+ * set_linkdowndefaultstate - set the default linkdown state
+ * @dd: the infinipath device
+ * @sleep: the new state
+ *
+ * Note that this will only take effect when the link state changes.
+ */
+static int set_linkdowndefaultstate(struct ipath_devdata *dd, int sleep)
+{
+ if (sleep)
+ dd->ipath_ibcctrl |= INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
+ else
+ dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ return 0;
+}
+
+/**
+ * recv_subn_set_portinfo - set port information
+ * @smp: the incoming SM packet
+ * @ibdev: the infiniband device
+ * @port: the port on the device
+ *
+ * Set Portinfo (see ch. 14.2.5.6).
+ */
+static int recv_subn_set_portinfo(struct ib_smp *smp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_port_info *pip = (struct ib_port_info *)smp->data;
+ struct ib_event event;
+ struct ipath_ibdev *dev;
+ struct ipath_devdata *dd;
+ char clientrereg = 0;
+ u16 lid, smlid;
+ u8 lwe;
+ u8 lse;
+ u8 state;
+ u16 lstate;
+ u32 mtu;
+ int ret, ore;
+
+ if (be32_to_cpu(smp->attr_mod) > ibdev->phys_port_cnt)
+ goto err;
+
+ dev = to_idev(ibdev);
+ dd = dev->dd;
+ event.device = ibdev;
+ event.element.port_num = port;
+
+ dev->mkey = pip->mkey;
+ dev->gid_prefix = pip->gid_prefix;
+ dev->mkey_lease_period = be16_to_cpu(pip->mkey_lease_period);
+
+ lid = be16_to_cpu(pip->lid);
+ if (dd->ipath_lid != lid ||
+ dd->ipath_lmc != (pip->mkeyprot_resv_lmc & 7)) {
+ /* Must be a valid unicast LID address. */
+ if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE)
+ goto err;
+ ipath_set_lid(dd, lid, pip->mkeyprot_resv_lmc & 7);
+ event.event = IB_EVENT_LID_CHANGE;
+ ib_dispatch_event(&event);
+ }
+
+ smlid = be16_to_cpu(pip->sm_lid);
+ if (smlid != dev->sm_lid) {
+ /* Must be a valid unicast LID address. */
+ if (smlid == 0 || smlid >= IPATH_MULTICAST_LID_BASE)
+ goto err;
+ dev->sm_lid = smlid;
+ event.event = IB_EVENT_SM_CHANGE;
+ ib_dispatch_event(&event);
+ }
+
+ /* Allow 1x or 4x to be set (see 14.2.6.6). */
+ lwe = pip->link_width_enabled;
+ if (lwe) {
+ if (lwe == 0xFF)
+ lwe = dd->ipath_link_width_supported;
+ else if (lwe >= 16 || (lwe & ~dd->ipath_link_width_supported))
+ goto err;
+ set_link_width_enabled(dd, lwe);
+ }
+
+ /* Allow 2.5 or 5.0 Gbs. */
+ lse = pip->linkspeedactive_enabled & 0xF;
+ if (lse) {
+ if (lse == 15)
+ lse = dd->ipath_link_speed_supported;
+ else if (lse >= 8 || (lse & ~dd->ipath_link_speed_supported))
+ goto err;
+ set_link_speed_enabled(dd, lse);
+ }
+
+ /* Set link down default state. */
+ switch (pip->portphysstate_linkdown & 0xF) {
+ case 0: /* NOP */
+ break;
+ case 1: /* SLEEP */
+ if (set_linkdowndefaultstate(dd, 1))
+ goto err;
+ break;
+ case 2: /* POLL */
+ if (set_linkdowndefaultstate(dd, 0))
+ goto err;
+ break;
+ default:
+ goto err;
+ }
+
+ dev->mkeyprot = pip->mkeyprot_resv_lmc >> 6;
+ dev->vl_high_limit = pip->vl_high_limit;
+
+ switch ((pip->neighbormtu_mastersmsl >> 4) & 0xF) {
+ case IB_MTU_256:
+ mtu = 256;
+ break;
+ case IB_MTU_512:
+ mtu = 512;
+ break;
+ case IB_MTU_1024:
+ mtu = 1024;
+ break;
+ case IB_MTU_2048:
+ mtu = 2048;
+ break;
+ case IB_MTU_4096:
+ if (!ipath_mtu4096)
+ goto err;
+ mtu = 4096;
+ break;
+ default:
+ /* XXX We have already partially updated our state! */
+ goto err;
+ }
+ ipath_set_mtu(dd, mtu);
+
+ dev->sm_sl = pip->neighbormtu_mastersmsl & 0xF;
+
+ /* We only support VL0 */
+ if (((pip->operationalvl_pei_peo_fpi_fpo >> 4) & 0xF) > 1)
+ goto err;
+
+ if (pip->mkey_violations == 0)
+ dev->mkey_violations = 0;
+
+ /*
+ * Hardware counter can't be reset so snapshot and subtract
+ * later.
+ */
+ if (pip->pkey_violations == 0)
+ dev->z_pkey_violations = ipath_get_cr_errpkey(dd);
+
+ if (pip->qkey_violations == 0)
+ dev->qkey_violations = 0;
+
+ ore = pip->localphyerrors_overrunerrors;
+ if (set_phyerrthreshold(dd, (ore >> 4) & 0xF))
+ goto err;
+
+ if (set_overrunthreshold(dd, (ore & 0xF)))
+ goto err;
+
+ dev->subnet_timeout = pip->clientrereg_resv_subnetto & 0x1F;
+
+ if (pip->clientrereg_resv_subnetto & 0x80) {
+ clientrereg = 1;
+ event.event = IB_EVENT_CLIENT_REREGISTER;
+ ib_dispatch_event(&event);
+ }
+
+ /*
+ * Do the port state change now that the other link parameters
+ * have been set.
+ * Changing the port physical state only makes sense if the link
+ * is down or is being set to down.
+ */
+ state = pip->linkspeed_portstate & 0xF;
+ lstate = (pip->portphysstate_linkdown >> 4) & 0xF;
+ if (lstate && !(state == IB_PORT_DOWN || state == IB_PORT_NOP))
+ goto err;
+
+ /*
+ * Only state changes of DOWN, ARM, and ACTIVE are valid
+ * and must be in the correct state to take effect (see 7.2.6).
+ */
+ switch (state) {
+ case IB_PORT_NOP:
+ if (lstate == 0)
+ break;
+ /* FALLTHROUGH */
+ case IB_PORT_DOWN:
+ if (lstate == 0)
+ lstate = IPATH_IB_LINKDOWN_ONLY;
+ else if (lstate == 1)
+ lstate = IPATH_IB_LINKDOWN_SLEEP;
+ else if (lstate == 2)
+ lstate = IPATH_IB_LINKDOWN;
+ else if (lstate == 3)
+ lstate = IPATH_IB_LINKDOWN_DISABLE;
+ else
+ goto err;
+ ipath_set_linkstate(dd, lstate);
+ if (lstate == IPATH_IB_LINKDOWN_DISABLE) {
+ ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
+ goto done;
+ }
+ ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED |
+ IPATH_LINKACTIVE, 1000);
+ break;
+ case IB_PORT_ARMED:
+ ipath_set_linkstate(dd, IPATH_IB_LINKARM);
+ break;
+ case IB_PORT_ACTIVE:
+ ipath_set_linkstate(dd, IPATH_IB_LINKACTIVE);
+ break;
+ default:
+ /* XXX We have already partially updated our state! */
+ goto err;
+ }
+
+ ret = recv_subn_get_portinfo(smp, ibdev, port);
+
+ if (clientrereg)
+ pip->clientrereg_resv_subnetto |= 0x80;
+
+ goto done;
+
+err:
+ smp->status |= IB_SMP_INVALID_FIELD;
+ ret = recv_subn_get_portinfo(smp, ibdev, port);
+
+done:
+ return ret;
+}
+
+/**
+ * rm_pkey - decrecment the reference count for the given PKEY
+ * @dd: the infinipath device
+ * @key: the PKEY index
+ *
+ * Return true if this was the last reference and the hardware table entry
+ * needs to be changed.
+ */
+static int rm_pkey(struct ipath_devdata *dd, u16 key)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (dd->ipath_pkeys[i] != key)
+ continue;
+ if (atomic_dec_and_test(&dd->ipath_pkeyrefs[i])) {
+ dd->ipath_pkeys[i] = 0;
+ ret = 1;
+ goto bail;
+ }
+ break;
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * add_pkey - add the given PKEY to the hardware table
+ * @dd: the infinipath device
+ * @key: the PKEY
+ *
+ * Return an error code if unable to add the entry, zero if no change,
+ * or 1 if the hardware PKEY register needs to be updated.
+ */
+static int add_pkey(struct ipath_devdata *dd, u16 key)
+{
+ int i;
+ u16 lkey = key & 0x7FFF;
+ int any = 0;
+ int ret;
+
+ if (lkey == 0x7FFF) {
+ ret = 0;
+ goto bail;
+ }
+
+ /* Look for an empty slot or a matching PKEY. */
+ for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i]) {
+ any++;
+ continue;
+ }
+ /* If it matches exactly, try to increment the ref count */
+ if (dd->ipath_pkeys[i] == key) {
+ if (atomic_inc_return(&dd->ipath_pkeyrefs[i]) > 1) {
+ ret = 0;
+ goto bail;
+ }
+ /* Lost the race. Look for an empty slot below. */
+ atomic_dec(&dd->ipath_pkeyrefs[i]);
+ any++;
+ }
+ /*
+ * It makes no sense to have both the limited and unlimited
+ * PKEY set at the same time since the unlimited one will
+ * disable the limited one.
+ */
+ if ((dd->ipath_pkeys[i] & 0x7FFF) == lkey) {
+ ret = -EEXIST;
+ goto bail;
+ }
+ }
+ if (!any) {
+ ret = -EBUSY;
+ goto bail;
+ }
+ for (i = 0; i < ARRAY_SIZE(dd->ipath_pkeys); i++) {
+ if (!dd->ipath_pkeys[i] &&
+ atomic_inc_return(&dd->ipath_pkeyrefs[i]) == 1) {
+ /* for ipathstats, etc. */
+ ipath_stats.sps_pkeys[i] = lkey;
+ dd->ipath_pkeys[i] = key;
+ ret = 1;
+ goto bail;
+ }
+ }
+ ret = -EBUSY;
+
+bail:
+ return ret;
+}
+
+/**
+ * set_pkeys - set the PKEY table for port 0
+ * @dd: the infinipath device
+ * @pkeys: the PKEY table
+ */
+static int set_pkeys(struct ipath_devdata *dd, u16 *pkeys, u8 port)
+{
+ struct ipath_portdata *pd;
+ int i;
+ int changed = 0;
+
+ /* always a kernel port, no locking needed */
+ pd = dd->ipath_pd[0];
+
+ for (i = 0; i < ARRAY_SIZE(pd->port_pkeys); i++) {
+ u16 key = pkeys[i];
+ u16 okey = pd->port_pkeys[i];
+
+ if (key == okey)
+ continue;
+ /*
+ * The value of this PKEY table entry is changing.
+ * Remove the old entry in the hardware's array of PKEYs.
+ */
+ if (okey & 0x7FFF)
+ changed |= rm_pkey(dd, okey);
+ if (key & 0x7FFF) {
+ int ret = add_pkey(dd, key);
+
+ if (ret < 0)
+ key = 0;
+ else
+ changed |= ret;
+ }
+ pd->port_pkeys[i] = key;
+ }
+ if (changed) {
+ u64 pkey;
+ struct ib_event event;
+
+ pkey = (u64) dd->ipath_pkeys[0] |
+ ((u64) dd->ipath_pkeys[1] << 16) |
+ ((u64) dd->ipath_pkeys[2] << 32) |
+ ((u64) dd->ipath_pkeys[3] << 48);
+ ipath_cdbg(VERBOSE, "p0 new pkey reg %llx\n",
+ (unsigned long long) pkey);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_partitionkey,
+ pkey);
+
+ event.event = IB_EVENT_PKEY_CHANGE;
+ event.device = &dd->verbs_dev->ibdev;
+ event.element.port_num = port;
+ ib_dispatch_event(&event);
+ }
+ return 0;
+}
+
+static int recv_subn_set_pkeytable(struct ib_smp *smp,
+ struct ib_device *ibdev, u8 port)
+{
+ u32 startpx = 32 * (be32_to_cpu(smp->attr_mod) & 0xffff);
+ __be16 *p = (__be16 *) smp->data;
+ u16 *q = (u16 *) smp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ unsigned i, n = ipath_get_npkeys(dev->dd);
+
+ for (i = 0; i < n; i++)
+ q[i] = be16_to_cpu(p[i]);
+
+ if (startpx != 0 || set_pkeys(dev->dd, q, port) != 0)
+ smp->status |= IB_SMP_INVALID_FIELD;
+
+ return recv_subn_get_pkeytable(smp, ibdev);
+}
+
+static int recv_pma_get_classportinfo(struct ib_pma_mad *pmp)
+{
+ struct ib_class_port_info *p =
+ (struct ib_class_port_info *)pmp->data;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+
+ if (pmp->mad_hdr.attr_mod != 0)
+ pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
+
+ /* Indicate AllPortSelect is valid (only one port anyway) */
+ p->capability_mask = cpu_to_be16(1 << 8);
+ p->base_version = 1;
+ p->class_version = 1;
+ /*
+ * Expected response time is 4.096 usec. * 2^18 == 1.073741824
+ * sec.
+ */
+ p->resp_time_value = 18;
+
+ return reply((struct ib_smp *) pmp);
+}
+
+/*
+ * The PortSamplesControl.CounterMasks field is an array of 3 bit fields
+ * which specify the N'th counter's capabilities. See ch. 16.1.3.2.
+ * We support 5 counters which only count the mandatory quantities.
+ */
+#define COUNTER_MASK(q, n) (q << ((9 - n) * 3))
+#define COUNTER_MASK0_9 cpu_to_be32(COUNTER_MASK(1, 0) | \
+ COUNTER_MASK(1, 1) | \
+ COUNTER_MASK(1, 2) | \
+ COUNTER_MASK(1, 3) | \
+ COUNTER_MASK(1, 4))
+
+static int recv_pma_get_portsamplescontrol(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portsamplescontrol *p =
+ (struct ib_pma_portsamplescontrol *)pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_cregs const *crp = dev->dd->ipath_cregs;
+ unsigned long flags;
+ u8 port_select = p->port_select;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+
+ p->port_select = port_select;
+ if (pmp->mad_hdr.attr_mod != 0 ||
+ (port_select != port && port_select != 0xFF))
+ pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
+ /*
+ * Ticks are 10x the link transfer period which for 2.5Gbs is 4
+ * nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample
+ * intervals are counted in ticks. Since we use Linux timers, that
+ * count in jiffies, we can't sample for less than 1000 ticks if HZ
+ * == 1000 (4000 ticks if HZ is 250). link_speed_active returns 2 for
+ * DDR, 1 for SDR, set the tick to 1 for DDR, 0 for SDR on chips that
+ * have hardware support for delaying packets.
+ */
+ if (crp->cr_psstat)
+ p->tick = dev->dd->ipath_link_speed_active - 1;
+ else
+ p->tick = 250; /* 1 usec. */
+ p->counter_width = 4; /* 32 bit counters */
+ p->counter_mask0_9 = COUNTER_MASK0_9;
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (crp->cr_psstat)
+ p->sample_status = ipath_read_creg32(dev->dd, crp->cr_psstat);
+ else
+ p->sample_status = dev->pma_sample_status;
+ p->sample_start = cpu_to_be32(dev->pma_sample_start);
+ p->sample_interval = cpu_to_be32(dev->pma_sample_interval);
+ p->tag = cpu_to_be16(dev->pma_tag);
+ p->counter_select[0] = dev->pma_counter_select[0];
+ p->counter_select[1] = dev->pma_counter_select[1];
+ p->counter_select[2] = dev->pma_counter_select[2];
+ p->counter_select[3] = dev->pma_counter_select[3];
+ p->counter_select[4] = dev->pma_counter_select[4];
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+
+ return reply((struct ib_smp *) pmp);
+}
+
+static int recv_pma_set_portsamplescontrol(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portsamplescontrol *p =
+ (struct ib_pma_portsamplescontrol *)pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_cregs const *crp = dev->dd->ipath_cregs;
+ unsigned long flags;
+ u8 status;
+ int ret;
+
+ if (pmp->mad_hdr.attr_mod != 0 ||
+ (p->port_select != port && p->port_select != 0xFF)) {
+ pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
+ ret = reply((struct ib_smp *) pmp);
+ goto bail;
+ }
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (crp->cr_psstat)
+ status = ipath_read_creg32(dev->dd, crp->cr_psstat);
+ else
+ status = dev->pma_sample_status;
+ if (status == IB_PMA_SAMPLE_STATUS_DONE) {
+ dev->pma_sample_start = be32_to_cpu(p->sample_start);
+ dev->pma_sample_interval = be32_to_cpu(p->sample_interval);
+ dev->pma_tag = be16_to_cpu(p->tag);
+ dev->pma_counter_select[0] = p->counter_select[0];
+ dev->pma_counter_select[1] = p->counter_select[1];
+ dev->pma_counter_select[2] = p->counter_select[2];
+ dev->pma_counter_select[3] = p->counter_select[3];
+ dev->pma_counter_select[4] = p->counter_select[4];
+ if (crp->cr_psstat) {
+ ipath_write_creg(dev->dd, crp->cr_psinterval,
+ dev->pma_sample_interval);
+ ipath_write_creg(dev->dd, crp->cr_psstart,
+ dev->pma_sample_start);
+ } else
+ dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+
+ ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port);
+
+bail:
+ return ret;
+}
+
+static u64 get_counter(struct ipath_ibdev *dev,
+ struct ipath_cregs const *crp,
+ __be16 sel)
+{
+ u64 ret;
+
+ switch (sel) {
+ case IB_PMA_PORT_XMIT_DATA:
+ ret = (crp->cr_psxmitdatacount) ?
+ ipath_read_creg32(dev->dd, crp->cr_psxmitdatacount) :
+ dev->ipath_sword;
+ break;
+ case IB_PMA_PORT_RCV_DATA:
+ ret = (crp->cr_psrcvdatacount) ?
+ ipath_read_creg32(dev->dd, crp->cr_psrcvdatacount) :
+ dev->ipath_rword;
+ break;
+ case IB_PMA_PORT_XMIT_PKTS:
+ ret = (crp->cr_psxmitpktscount) ?
+ ipath_read_creg32(dev->dd, crp->cr_psxmitpktscount) :
+ dev->ipath_spkts;
+ break;
+ case IB_PMA_PORT_RCV_PKTS:
+ ret = (crp->cr_psrcvpktscount) ?
+ ipath_read_creg32(dev->dd, crp->cr_psrcvpktscount) :
+ dev->ipath_rpkts;
+ break;
+ case IB_PMA_PORT_XMIT_WAIT:
+ ret = (crp->cr_psxmitwaitcount) ?
+ ipath_read_creg32(dev->dd, crp->cr_psxmitwaitcount) :
+ dev->ipath_xmit_wait;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int recv_pma_get_portsamplesresult(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev)
+{
+ struct ib_pma_portsamplesresult *p =
+ (struct ib_pma_portsamplesresult *)pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_cregs const *crp = dev->dd->ipath_cregs;
+ u8 status;
+ int i;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+ p->tag = cpu_to_be16(dev->pma_tag);
+ if (crp->cr_psstat)
+ status = ipath_read_creg32(dev->dd, crp->cr_psstat);
+ else
+ status = dev->pma_sample_status;
+ p->sample_status = cpu_to_be16(status);
+ for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
+ p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
+ cpu_to_be32(
+ get_counter(dev, crp, dev->pma_counter_select[i]));
+
+ return reply((struct ib_smp *) pmp);
+}
+
+static int recv_pma_get_portsamplesresult_ext(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev)
+{
+ struct ib_pma_portsamplesresult_ext *p =
+ (struct ib_pma_portsamplesresult_ext *)pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_cregs const *crp = dev->dd->ipath_cregs;
+ u8 status;
+ int i;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+ p->tag = cpu_to_be16(dev->pma_tag);
+ if (crp->cr_psstat)
+ status = ipath_read_creg32(dev->dd, crp->cr_psstat);
+ else
+ status = dev->pma_sample_status;
+ p->sample_status = cpu_to_be16(status);
+ /* 64 bits */
+ p->extended_width = cpu_to_be32(0x80000000);
+ for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++)
+ p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 :
+ cpu_to_be64(
+ get_counter(dev, crp, dev->pma_counter_select[i]));
+
+ return reply((struct ib_smp *) pmp);
+}
+
+static int recv_pma_get_portcounters(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
+ pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_verbs_counters cntrs;
+ u8 port_select = p->port_select;
+
+ ipath_get_counters(dev->dd, &cntrs);
+
+ /* Adjust counters for any resets done. */
+ cntrs.symbol_error_counter -= dev->z_symbol_error_counter;
+ cntrs.link_error_recovery_counter -=
+ dev->z_link_error_recovery_counter;
+ cntrs.link_downed_counter -= dev->z_link_downed_counter;
+ cntrs.port_rcv_errors += dev->rcv_errors;
+ cntrs.port_rcv_errors -= dev->z_port_rcv_errors;
+ cntrs.port_rcv_remphys_errors -= dev->z_port_rcv_remphys_errors;
+ cntrs.port_xmit_discards -= dev->z_port_xmit_discards;
+ cntrs.port_xmit_data -= dev->z_port_xmit_data;
+ cntrs.port_rcv_data -= dev->z_port_rcv_data;
+ cntrs.port_xmit_packets -= dev->z_port_xmit_packets;
+ cntrs.port_rcv_packets -= dev->z_port_rcv_packets;
+ cntrs.local_link_integrity_errors -=
+ dev->z_local_link_integrity_errors;
+ cntrs.excessive_buffer_overrun_errors -=
+ dev->z_excessive_buffer_overrun_errors;
+ cntrs.vl15_dropped -= dev->z_vl15_dropped;
+ cntrs.vl15_dropped += dev->n_vl15_dropped;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+
+ p->port_select = port_select;
+ if (pmp->mad_hdr.attr_mod != 0 ||
+ (port_select != port && port_select != 0xFF))
+ pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
+
+ if (cntrs.symbol_error_counter > 0xFFFFUL)
+ p->symbol_error_counter = cpu_to_be16(0xFFFF);
+ else
+ p->symbol_error_counter =
+ cpu_to_be16((u16)cntrs.symbol_error_counter);
+ if (cntrs.link_error_recovery_counter > 0xFFUL)
+ p->link_error_recovery_counter = 0xFF;
+ else
+ p->link_error_recovery_counter =
+ (u8)cntrs.link_error_recovery_counter;
+ if (cntrs.link_downed_counter > 0xFFUL)
+ p->link_downed_counter = 0xFF;
+ else
+ p->link_downed_counter = (u8)cntrs.link_downed_counter;
+ if (cntrs.port_rcv_errors > 0xFFFFUL)
+ p->port_rcv_errors = cpu_to_be16(0xFFFF);
+ else
+ p->port_rcv_errors =
+ cpu_to_be16((u16) cntrs.port_rcv_errors);
+ if (cntrs.port_rcv_remphys_errors > 0xFFFFUL)
+ p->port_rcv_remphys_errors = cpu_to_be16(0xFFFF);
+ else
+ p->port_rcv_remphys_errors =
+ cpu_to_be16((u16)cntrs.port_rcv_remphys_errors);
+ if (cntrs.port_xmit_discards > 0xFFFFUL)
+ p->port_xmit_discards = cpu_to_be16(0xFFFF);
+ else
+ p->port_xmit_discards =
+ cpu_to_be16((u16)cntrs.port_xmit_discards);
+ if (cntrs.local_link_integrity_errors > 0xFUL)
+ cntrs.local_link_integrity_errors = 0xFUL;
+ if (cntrs.excessive_buffer_overrun_errors > 0xFUL)
+ cntrs.excessive_buffer_overrun_errors = 0xFUL;
+ p->link_overrun_errors = (cntrs.local_link_integrity_errors << 4) |
+ cntrs.excessive_buffer_overrun_errors;
+ if (cntrs.vl15_dropped > 0xFFFFUL)
+ p->vl15_dropped = cpu_to_be16(0xFFFF);
+ else
+ p->vl15_dropped = cpu_to_be16((u16)cntrs.vl15_dropped);
+ if (cntrs.port_xmit_data > 0xFFFFFFFFUL)
+ p->port_xmit_data = cpu_to_be32(0xFFFFFFFF);
+ else
+ p->port_xmit_data = cpu_to_be32((u32)cntrs.port_xmit_data);
+ if (cntrs.port_rcv_data > 0xFFFFFFFFUL)
+ p->port_rcv_data = cpu_to_be32(0xFFFFFFFF);
+ else
+ p->port_rcv_data = cpu_to_be32((u32)cntrs.port_rcv_data);
+ if (cntrs.port_xmit_packets > 0xFFFFFFFFUL)
+ p->port_xmit_packets = cpu_to_be32(0xFFFFFFFF);
+ else
+ p->port_xmit_packets =
+ cpu_to_be32((u32)cntrs.port_xmit_packets);
+ if (cntrs.port_rcv_packets > 0xFFFFFFFFUL)
+ p->port_rcv_packets = cpu_to_be32(0xFFFFFFFF);
+ else
+ p->port_rcv_packets =
+ cpu_to_be32((u32) cntrs.port_rcv_packets);
+
+ return reply((struct ib_smp *) pmp);
+}
+
+static int recv_pma_get_portcounters_ext(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portcounters_ext *p =
+ (struct ib_pma_portcounters_ext *)pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ u64 swords, rwords, spkts, rpkts, xwait;
+ u8 port_select = p->port_select;
+
+ ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
+ &rpkts, &xwait);
+
+ /* Adjust counters for any resets done. */
+ swords -= dev->z_port_xmit_data;
+ rwords -= dev->z_port_rcv_data;
+ spkts -= dev->z_port_xmit_packets;
+ rpkts -= dev->z_port_rcv_packets;
+
+ memset(pmp->data, 0, sizeof(pmp->data));
+
+ p->port_select = port_select;
+ if (pmp->mad_hdr.attr_mod != 0 ||
+ (port_select != port && port_select != 0xFF))
+ pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD;
+
+ p->port_xmit_data = cpu_to_be64(swords);
+ p->port_rcv_data = cpu_to_be64(rwords);
+ p->port_xmit_packets = cpu_to_be64(spkts);
+ p->port_rcv_packets = cpu_to_be64(rpkts);
+ p->port_unicast_xmit_packets = cpu_to_be64(dev->n_unicast_xmit);
+ p->port_unicast_rcv_packets = cpu_to_be64(dev->n_unicast_rcv);
+ p->port_multicast_xmit_packets = cpu_to_be64(dev->n_multicast_xmit);
+ p->port_multicast_rcv_packets = cpu_to_be64(dev->n_multicast_rcv);
+
+ return reply((struct ib_smp *) pmp);
+}
+
+static int recv_pma_set_portcounters(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
+ pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_verbs_counters cntrs;
+
+ /*
+ * Since the HW doesn't support clearing counters, we save the
+ * current count and subtract it from future responses.
+ */
+ ipath_get_counters(dev->dd, &cntrs);
+
+ if (p->counter_select & IB_PMA_SEL_SYMBOL_ERROR)
+ dev->z_symbol_error_counter = cntrs.symbol_error_counter;
+
+ if (p->counter_select & IB_PMA_SEL_LINK_ERROR_RECOVERY)
+ dev->z_link_error_recovery_counter =
+ cntrs.link_error_recovery_counter;
+
+ if (p->counter_select & IB_PMA_SEL_LINK_DOWNED)
+ dev->z_link_downed_counter = cntrs.link_downed_counter;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_RCV_ERRORS)
+ dev->z_port_rcv_errors =
+ cntrs.port_rcv_errors + dev->rcv_errors;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS)
+ dev->z_port_rcv_remphys_errors =
+ cntrs.port_rcv_remphys_errors;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DISCARDS)
+ dev->z_port_xmit_discards = cntrs.port_xmit_discards;
+
+ if (p->counter_select & IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS)
+ dev->z_local_link_integrity_errors =
+ cntrs.local_link_integrity_errors;
+
+ if (p->counter_select & IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS)
+ dev->z_excessive_buffer_overrun_errors =
+ cntrs.excessive_buffer_overrun_errors;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) {
+ dev->n_vl15_dropped = 0;
+ dev->z_vl15_dropped = cntrs.vl15_dropped;
+ }
+
+ if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA)
+ dev->z_port_xmit_data = cntrs.port_xmit_data;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_RCV_DATA)
+ dev->z_port_rcv_data = cntrs.port_rcv_data;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_XMIT_PACKETS)
+ dev->z_port_xmit_packets = cntrs.port_xmit_packets;
+
+ if (p->counter_select & IB_PMA_SEL_PORT_RCV_PACKETS)
+ dev->z_port_rcv_packets = cntrs.port_rcv_packets;
+
+ return recv_pma_get_portcounters(pmp, ibdev, port);
+}
+
+static int recv_pma_set_portcounters_ext(struct ib_pma_mad *pmp,
+ struct ib_device *ibdev, u8 port)
+{
+ struct ib_pma_portcounters *p = (struct ib_pma_portcounters *)
+ pmp->data;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ u64 swords, rwords, spkts, rpkts, xwait;
+
+ ipath_snapshot_counters(dev->dd, &swords, &rwords, &spkts,
+ &rpkts, &xwait);
+
+ if (p->counter_select & IB_PMA_SELX_PORT_XMIT_DATA)
+ dev->z_port_xmit_data = swords;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_RCV_DATA)
+ dev->z_port_rcv_data = rwords;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_XMIT_PACKETS)
+ dev->z_port_xmit_packets = spkts;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_RCV_PACKETS)
+ dev->z_port_rcv_packets = rpkts;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_UNI_XMIT_PACKETS)
+ dev->n_unicast_xmit = 0;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_UNI_RCV_PACKETS)
+ dev->n_unicast_rcv = 0;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS)
+ dev->n_multicast_xmit = 0;
+
+ if (p->counter_select & IB_PMA_SELX_PORT_MULTI_RCV_PACKETS)
+ dev->n_multicast_rcv = 0;
+
+ return recv_pma_get_portcounters_ext(pmp, ibdev, port);
+}
+
+static int process_subn(struct ib_device *ibdev, int mad_flags,
+ u8 port_num, const struct ib_mad *in_mad,
+ struct ib_mad *out_mad)
+{
+ struct ib_smp *smp = (struct ib_smp *)out_mad;
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ int ret;
+
+ *out_mad = *in_mad;
+ if (smp->class_version != 1) {
+ smp->status |= IB_SMP_UNSUP_VERSION;
+ ret = reply(smp);
+ goto bail;
+ }
+
+ /* Is the mkey in the process of expiring? */
+ if (dev->mkey_lease_timeout &&
+ time_after_eq(jiffies, dev->mkey_lease_timeout)) {
+ /* Clear timeout and mkey protection field. */
+ dev->mkey_lease_timeout = 0;
+ dev->mkeyprot = 0;
+ }
+
+ /*
+ * M_Key checking depends on
+ * Portinfo:M_Key_protect_bits
+ */
+ if ((mad_flags & IB_MAD_IGNORE_MKEY) == 0 && dev->mkey != 0 &&
+ dev->mkey != smp->mkey &&
+ (smp->method == IB_MGMT_METHOD_SET ||
+ (smp->method == IB_MGMT_METHOD_GET &&
+ dev->mkeyprot >= 2))) {
+ if (dev->mkey_violations != 0xFFFF)
+ ++dev->mkey_violations;
+ if (dev->mkey_lease_timeout ||
+ dev->mkey_lease_period == 0) {
+ ret = IB_MAD_RESULT_SUCCESS |
+ IB_MAD_RESULT_CONSUMED;
+ goto bail;
+ }
+ dev->mkey_lease_timeout = jiffies +
+ dev->mkey_lease_period * HZ;
+ /* Future: Generate a trap notice. */
+ ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
+ goto bail;
+ } else if (dev->mkey_lease_timeout)
+ dev->mkey_lease_timeout = 0;
+
+ switch (smp->method) {
+ case IB_MGMT_METHOD_GET:
+ switch (smp->attr_id) {
+ case IB_SMP_ATTR_NODE_DESC:
+ ret = recv_subn_get_nodedescription(smp, ibdev);
+ goto bail;
+ case IB_SMP_ATTR_NODE_INFO:
+ ret = recv_subn_get_nodeinfo(smp, ibdev, port_num);
+ goto bail;
+ case IB_SMP_ATTR_GUID_INFO:
+ ret = recv_subn_get_guidinfo(smp, ibdev);
+ goto bail;
+ case IB_SMP_ATTR_PORT_INFO:
+ ret = recv_subn_get_portinfo(smp, ibdev, port_num);
+ goto bail;
+ case IB_SMP_ATTR_PKEY_TABLE:
+ ret = recv_subn_get_pkeytable(smp, ibdev);
+ goto bail;
+ case IB_SMP_ATTR_SM_INFO:
+ if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
+ ret = IB_MAD_RESULT_SUCCESS |
+ IB_MAD_RESULT_CONSUMED;
+ goto bail;
+ }
+ if (dev->port_cap_flags & IB_PORT_SM) {
+ ret = IB_MAD_RESULT_SUCCESS;
+ goto bail;
+ }
+ /* FALLTHROUGH */
+ default:
+ smp->status |= IB_SMP_UNSUP_METH_ATTR;
+ ret = reply(smp);
+ goto bail;
+ }
+
+ case IB_MGMT_METHOD_SET:
+ switch (smp->attr_id) {
+ case IB_SMP_ATTR_GUID_INFO:
+ ret = recv_subn_set_guidinfo(smp, ibdev);
+ goto bail;
+ case IB_SMP_ATTR_PORT_INFO:
+ ret = recv_subn_set_portinfo(smp, ibdev, port_num);
+ goto bail;
+ case IB_SMP_ATTR_PKEY_TABLE:
+ ret = recv_subn_set_pkeytable(smp, ibdev, port_num);
+ goto bail;
+ case IB_SMP_ATTR_SM_INFO:
+ if (dev->port_cap_flags & IB_PORT_SM_DISABLED) {
+ ret = IB_MAD_RESULT_SUCCESS |
+ IB_MAD_RESULT_CONSUMED;
+ goto bail;
+ }
+ if (dev->port_cap_flags & IB_PORT_SM) {
+ ret = IB_MAD_RESULT_SUCCESS;
+ goto bail;
+ }
+ /* FALLTHROUGH */
+ default:
+ smp->status |= IB_SMP_UNSUP_METH_ATTR;
+ ret = reply(smp);
+ goto bail;
+ }
+
+ case IB_MGMT_METHOD_TRAP:
+ case IB_MGMT_METHOD_REPORT:
+ case IB_MGMT_METHOD_REPORT_RESP:
+ case IB_MGMT_METHOD_TRAP_REPRESS:
+ case IB_MGMT_METHOD_GET_RESP:
+ /*
+ * The ib_mad module will call us to process responses
+ * before checking for other consumers.
+ * Just tell the caller to process it normally.
+ */
+ ret = IB_MAD_RESULT_SUCCESS;
+ goto bail;
+ default:
+ smp->status |= IB_SMP_UNSUP_METHOD;
+ ret = reply(smp);
+ }
+
+bail:
+ return ret;
+}
+
+static int process_perf(struct ib_device *ibdev, u8 port_num,
+ const struct ib_mad *in_mad,
+ struct ib_mad *out_mad)
+{
+ struct ib_pma_mad *pmp = (struct ib_pma_mad *)out_mad;
+ int ret;
+
+ *out_mad = *in_mad;
+ if (pmp->mad_hdr.class_version != 1) {
+ pmp->mad_hdr.status |= IB_SMP_UNSUP_VERSION;
+ ret = reply((struct ib_smp *) pmp);
+ goto bail;
+ }
+
+ switch (pmp->mad_hdr.method) {
+ case IB_MGMT_METHOD_GET:
+ switch (pmp->mad_hdr.attr_id) {
+ case IB_PMA_CLASS_PORT_INFO:
+ ret = recv_pma_get_classportinfo(pmp);
+ goto bail;
+ case IB_PMA_PORT_SAMPLES_CONTROL:
+ ret = recv_pma_get_portsamplescontrol(pmp, ibdev,
+ port_num);
+ goto bail;
+ case IB_PMA_PORT_SAMPLES_RESULT:
+ ret = recv_pma_get_portsamplesresult(pmp, ibdev);
+ goto bail;
+ case IB_PMA_PORT_SAMPLES_RESULT_EXT:
+ ret = recv_pma_get_portsamplesresult_ext(pmp,
+ ibdev);
+ goto bail;
+ case IB_PMA_PORT_COUNTERS:
+ ret = recv_pma_get_portcounters(pmp, ibdev,
+ port_num);
+ goto bail;
+ case IB_PMA_PORT_COUNTERS_EXT:
+ ret = recv_pma_get_portcounters_ext(pmp, ibdev,
+ port_num);
+ goto bail;
+ default:
+ pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
+ ret = reply((struct ib_smp *) pmp);
+ goto bail;
+ }
+
+ case IB_MGMT_METHOD_SET:
+ switch (pmp->mad_hdr.attr_id) {
+ case IB_PMA_PORT_SAMPLES_CONTROL:
+ ret = recv_pma_set_portsamplescontrol(pmp, ibdev,
+ port_num);
+ goto bail;
+ case IB_PMA_PORT_COUNTERS:
+ ret = recv_pma_set_portcounters(pmp, ibdev,
+ port_num);
+ goto bail;
+ case IB_PMA_PORT_COUNTERS_EXT:
+ ret = recv_pma_set_portcounters_ext(pmp, ibdev,
+ port_num);
+ goto bail;
+ default:
+ pmp->mad_hdr.status |= IB_SMP_UNSUP_METH_ATTR;
+ ret = reply((struct ib_smp *) pmp);
+ goto bail;
+ }
+
+ case IB_MGMT_METHOD_GET_RESP:
+ /*
+ * The ib_mad module will call us to process responses
+ * before checking for other consumers.
+ * Just tell the caller to process it normally.
+ */
+ ret = IB_MAD_RESULT_SUCCESS;
+ goto bail;
+ default:
+ pmp->mad_hdr.status |= IB_SMP_UNSUP_METHOD;
+ ret = reply((struct ib_smp *) pmp);
+ }
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_process_mad - process an incoming MAD packet
+ * @ibdev: the infiniband device this packet came in on
+ * @mad_flags: MAD flags
+ * @port_num: the port number this packet came in on
+ * @in_wc: the work completion entry for this packet
+ * @in_grh: the global route header for this packet
+ * @in_mad: the incoming MAD
+ * @out_mad: any outgoing MAD reply
+ *
+ * Returns IB_MAD_RESULT_SUCCESS if this is a MAD that we are not
+ * interested in processing.
+ *
+ * Note that the verbs framework has already done the MAD sanity checks,
+ * and hop count/pointer updating for IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE
+ * MADs.
+ *
+ * This is called by the ib_mad module.
+ */
+int ipath_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num,
+ const struct ib_wc *in_wc, const struct ib_grh *in_grh,
+ const struct ib_mad_hdr *in, size_t in_mad_size,
+ struct ib_mad_hdr *out, size_t *out_mad_size,
+ u16 *out_mad_pkey_index)
+{
+ int ret;
+ const struct ib_mad *in_mad = (const struct ib_mad *)in;
+ struct ib_mad *out_mad = (struct ib_mad *)out;
+
+ if (WARN_ON_ONCE(in_mad_size != sizeof(*in_mad) ||
+ *out_mad_size != sizeof(*out_mad)))
+ return IB_MAD_RESULT_FAILURE;
+
+ switch (in_mad->mad_hdr.mgmt_class) {
+ case IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE:
+ case IB_MGMT_CLASS_SUBN_LID_ROUTED:
+ ret = process_subn(ibdev, mad_flags, port_num,
+ in_mad, out_mad);
+ goto bail;
+ case IB_MGMT_CLASS_PERF_MGMT:
+ ret = process_perf(ibdev, port_num, in_mad, out_mad);
+ goto bail;
+ default:
+ ret = IB_MAD_RESULT_SUCCESS;
+ }
+
+bail:
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <asm/pgtable.h>
+
+#include "ipath_verbs.h"
+
+/**
+ * ipath_release_mmap_info - free mmap info structure
+ * @ref: a pointer to the kref within struct ipath_mmap_info
+ */
+void ipath_release_mmap_info(struct kref *ref)
+{
+ struct ipath_mmap_info *ip =
+ container_of(ref, struct ipath_mmap_info, ref);
+ struct ipath_ibdev *dev = to_idev(ip->context->device);
+
+ spin_lock_irq(&dev->pending_lock);
+ list_del(&ip->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+
+ vfree(ip->obj);
+ kfree(ip);
+}
+
+/*
+ * open and close keep track of how many times the CQ is mapped,
+ * to avoid releasing it.
+ */
+static void ipath_vma_open(struct vm_area_struct *vma)
+{
+ struct ipath_mmap_info *ip = vma->vm_private_data;
+
+ kref_get(&ip->ref);
+}
+
+static void ipath_vma_close(struct vm_area_struct *vma)
+{
+ struct ipath_mmap_info *ip = vma->vm_private_data;
+
+ kref_put(&ip->ref, ipath_release_mmap_info);
+}
+
+static const struct vm_operations_struct ipath_vm_ops = {
+ .open = ipath_vma_open,
+ .close = ipath_vma_close,
+};
+
+/**
+ * ipath_mmap - create a new mmap region
+ * @context: the IB user context of the process making the mmap() call
+ * @vma: the VMA to be initialized
+ * Return zero if the mmap is OK. Otherwise, return an errno.
+ */
+int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
+{
+ struct ipath_ibdev *dev = to_idev(context->device);
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long size = vma->vm_end - vma->vm_start;
+ struct ipath_mmap_info *ip, *pp;
+ int ret = -EINVAL;
+
+ /*
+ * Search the device's list of objects waiting for a mmap call.
+ * Normally, this list is very short since a call to create a
+ * CQ, QP, or SRQ is soon followed by a call to mmap().
+ */
+ spin_lock_irq(&dev->pending_lock);
+ list_for_each_entry_safe(ip, pp, &dev->pending_mmaps,
+ pending_mmaps) {
+ /* Only the creator is allowed to mmap the object */
+ if (context != ip->context || (__u64) offset != ip->offset)
+ continue;
+ /* Don't allow a mmap larger than the object. */
+ if (size > ip->size)
+ break;
+
+ list_del_init(&ip->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+
+ ret = remap_vmalloc_range(vma, ip->obj, 0);
+ if (ret)
+ goto done;
+ vma->vm_ops = &ipath_vm_ops;
+ vma->vm_private_data = ip;
+ ipath_vma_open(vma);
+ goto done;
+ }
+ spin_unlock_irq(&dev->pending_lock);
+done:
+ return ret;
+}
+
+/*
+ * Allocate information for ipath_mmap
+ */
+struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
+ u32 size,
+ struct ib_ucontext *context,
+ void *obj) {
+ struct ipath_mmap_info *ip;
+
+ ip = kmalloc(sizeof *ip, GFP_KERNEL);
+ if (!ip)
+ goto bail;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irq(&dev->mmap_offset_lock);
+ if (dev->mmap_offset == 0)
+ dev->mmap_offset = PAGE_SIZE;
+ ip->offset = dev->mmap_offset;
+ dev->mmap_offset += size;
+ spin_unlock_irq(&dev->mmap_offset_lock);
+
+ INIT_LIST_HEAD(&ip->pending_mmaps);
+ ip->size = size;
+ ip->context = context;
+ ip->obj = obj;
+ kref_init(&ip->ref);
+
+bail:
+ return ip;
+}
+
+void ipath_update_mmap_info(struct ipath_ibdev *dev,
+ struct ipath_mmap_info *ip,
+ u32 size, void *obj) {
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irq(&dev->mmap_offset_lock);
+ if (dev->mmap_offset == 0)
+ dev->mmap_offset = PAGE_SIZE;
+ ip->offset = dev->mmap_offset;
+ dev->mmap_offset += size;
+ spin_unlock_irq(&dev->mmap_offset_lock);
+
+ ip->size = size;
+ ip->obj = obj;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/slab.h>
+
+#include <rdma/ib_umem.h>
+#include <rdma/ib_pack.h>
+#include <rdma/ib_smi.h>
+
+#include "ipath_verbs.h"
+
+/* Fast memory region */
+struct ipath_fmr {
+ struct ib_fmr ibfmr;
+ u8 page_shift;
+ struct ipath_mregion mr; /* must be last */
+};
+
+static inline struct ipath_fmr *to_ifmr(struct ib_fmr *ibfmr)
+{
+ return container_of(ibfmr, struct ipath_fmr, ibfmr);
+}
+
+/**
+ * ipath_get_dma_mr - get a DMA memory region
+ * @pd: protection domain for this memory region
+ * @acc: access flags
+ *
+ * Returns the memory region on success, otherwise returns an errno.
+ * Note that all DMA addresses should be created via the
+ * struct ib_dma_mapping_ops functions (see ipath_dma.c).
+ */
+struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc)
+{
+ struct ipath_mr *mr;
+ struct ib_mr *ret;
+
+ mr = kzalloc(sizeof *mr, GFP_KERNEL);
+ if (!mr) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ mr->mr.access_flags = acc;
+ ret = &mr->ibmr;
+
+bail:
+ return ret;
+}
+
+static struct ipath_mr *alloc_mr(int count,
+ struct ipath_lkey_table *lk_table)
+{
+ struct ipath_mr *mr;
+ int m, i = 0;
+
+ /* Allocate struct plus pointers to first level page tables. */
+ m = (count + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
+ mr = kmalloc(sizeof *mr + m * sizeof mr->mr.map[0], GFP_KERNEL);
+ if (!mr)
+ goto done;
+
+ /* Allocate first level page tables. */
+ for (; i < m; i++) {
+ mr->mr.map[i] = kmalloc(sizeof *mr->mr.map[0], GFP_KERNEL);
+ if (!mr->mr.map[i])
+ goto bail;
+ }
+ mr->mr.mapsz = m;
+
+ /*
+ * ib_reg_phys_mr() will initialize mr->ibmr except for
+ * lkey and rkey.
+ */
+ if (!ipath_alloc_lkey(lk_table, &mr->mr))
+ goto bail;
+ mr->ibmr.rkey = mr->ibmr.lkey = mr->mr.lkey;
+
+ goto done;
+
+bail:
+ while (i) {
+ i--;
+ kfree(mr->mr.map[i]);
+ }
+ kfree(mr);
+ mr = NULL;
+
+done:
+ return mr;
+}
+
+/**
+ * ipath_reg_phys_mr - register a physical memory region
+ * @pd: protection domain for this memory region
+ * @buffer_list: pointer to the list of physical buffers to register
+ * @num_phys_buf: the number of physical buffers to register
+ * @iova_start: the starting address passed over IB which maps to this MR
+ *
+ * Returns the memory region on success, otherwise returns an errno.
+ */
+struct ib_mr *ipath_reg_phys_mr(struct ib_pd *pd,
+ struct ib_phys_buf *buffer_list,
+ int num_phys_buf, int acc, u64 *iova_start)
+{
+ struct ipath_mr *mr;
+ int n, m, i;
+ struct ib_mr *ret;
+
+ mr = alloc_mr(num_phys_buf, &to_idev(pd->device)->lk_table);
+ if (mr == NULL) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ mr->mr.pd = pd;
+ mr->mr.user_base = *iova_start;
+ mr->mr.iova = *iova_start;
+ mr->mr.length = 0;
+ mr->mr.offset = 0;
+ mr->mr.access_flags = acc;
+ mr->mr.max_segs = num_phys_buf;
+ mr->umem = NULL;
+
+ m = 0;
+ n = 0;
+ for (i = 0; i < num_phys_buf; i++) {
+ mr->mr.map[m]->segs[n].vaddr = (void *) buffer_list[i].addr;
+ mr->mr.map[m]->segs[n].length = buffer_list[i].size;
+ mr->mr.length += buffer_list[i].size;
+ n++;
+ if (n == IPATH_SEGSZ) {
+ m++;
+ n = 0;
+ }
+ }
+
+ ret = &mr->ibmr;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_reg_user_mr - register a userspace memory region
+ * @pd: protection domain for this memory region
+ * @start: starting userspace address
+ * @length: length of region to register
+ * @virt_addr: virtual address to use (from HCA's point of view)
+ * @mr_access_flags: access flags for this memory region
+ * @udata: unused by the InfiniPath driver
+ *
+ * Returns the memory region on success, otherwise returns an errno.
+ */
+struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
+ u64 virt_addr, int mr_access_flags,
+ struct ib_udata *udata)
+{
+ struct ipath_mr *mr;
+ struct ib_umem *umem;
+ int n, m, entry;
+ struct scatterlist *sg;
+ struct ib_mr *ret;
+
+ if (length == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ umem = ib_umem_get(pd->uobject->context, start, length,
+ mr_access_flags, 0);
+ if (IS_ERR(umem))
+ return (void *) umem;
+
+ n = umem->nmap;
+ mr = alloc_mr(n, &to_idev(pd->device)->lk_table);
+ if (!mr) {
+ ret = ERR_PTR(-ENOMEM);
+ ib_umem_release(umem);
+ goto bail;
+ }
+
+ mr->mr.pd = pd;
+ mr->mr.user_base = start;
+ mr->mr.iova = virt_addr;
+ mr->mr.length = length;
+ mr->mr.offset = ib_umem_offset(umem);
+ mr->mr.access_flags = mr_access_flags;
+ mr->mr.max_segs = n;
+ mr->umem = umem;
+
+ m = 0;
+ n = 0;
+ for_each_sg(umem->sg_head.sgl, sg, umem->nmap, entry) {
+ void *vaddr;
+
+ vaddr = page_address(sg_page(sg));
+ if (!vaddr) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+ mr->mr.map[m]->segs[n].vaddr = vaddr;
+ mr->mr.map[m]->segs[n].length = umem->page_size;
+ n++;
+ if (n == IPATH_SEGSZ) {
+ m++;
+ n = 0;
+ }
+ }
+ ret = &mr->ibmr;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_dereg_mr - unregister and free a memory region
+ * @ibmr: the memory region to free
+ *
+ * Returns 0 on success.
+ *
+ * Note that this is called to free MRs created by ipath_get_dma_mr()
+ * or ipath_reg_user_mr().
+ */
+int ipath_dereg_mr(struct ib_mr *ibmr)
+{
+ struct ipath_mr *mr = to_imr(ibmr);
+ int i;
+
+ ipath_free_lkey(&to_idev(ibmr->device)->lk_table, ibmr->lkey);
+ i = mr->mr.mapsz;
+ while (i) {
+ i--;
+ kfree(mr->mr.map[i]);
+ }
+
+ if (mr->umem)
+ ib_umem_release(mr->umem);
+
+ kfree(mr);
+ return 0;
+}
+
+/**
+ * ipath_alloc_fmr - allocate a fast memory region
+ * @pd: the protection domain for this memory region
+ * @mr_access_flags: access flags for this memory region
+ * @fmr_attr: fast memory region attributes
+ *
+ * Returns the memory region on success, otherwise returns an errno.
+ */
+struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
+ struct ib_fmr_attr *fmr_attr)
+{
+ struct ipath_fmr *fmr;
+ int m, i = 0;
+ struct ib_fmr *ret;
+
+ /* Allocate struct plus pointers to first level page tables. */
+ m = (fmr_attr->max_pages + IPATH_SEGSZ - 1) / IPATH_SEGSZ;
+ fmr = kmalloc(sizeof *fmr + m * sizeof fmr->mr.map[0], GFP_KERNEL);
+ if (!fmr)
+ goto bail;
+
+ /* Allocate first level page tables. */
+ for (; i < m; i++) {
+ fmr->mr.map[i] = kmalloc(sizeof *fmr->mr.map[0],
+ GFP_KERNEL);
+ if (!fmr->mr.map[i])
+ goto bail;
+ }
+ fmr->mr.mapsz = m;
+
+ /*
+ * ib_alloc_fmr() will initialize fmr->ibfmr except for lkey &
+ * rkey.
+ */
+ if (!ipath_alloc_lkey(&to_idev(pd->device)->lk_table, &fmr->mr))
+ goto bail;
+ fmr->ibfmr.rkey = fmr->ibfmr.lkey = fmr->mr.lkey;
+ /*
+ * Resources are allocated but no valid mapping (RKEY can't be
+ * used).
+ */
+ fmr->mr.pd = pd;
+ fmr->mr.user_base = 0;
+ fmr->mr.iova = 0;
+ fmr->mr.length = 0;
+ fmr->mr.offset = 0;
+ fmr->mr.access_flags = mr_access_flags;
+ fmr->mr.max_segs = fmr_attr->max_pages;
+ fmr->page_shift = fmr_attr->page_shift;
+
+ ret = &fmr->ibfmr;
+ goto done;
+
+bail:
+ while (i)
+ kfree(fmr->mr.map[--i]);
+ kfree(fmr);
+ ret = ERR_PTR(-ENOMEM);
+
+done:
+ return ret;
+}
+
+/**
+ * ipath_map_phys_fmr - set up a fast memory region
+ * @ibmfr: the fast memory region to set up
+ * @page_list: the list of pages to associate with the fast memory region
+ * @list_len: the number of pages to associate with the fast memory region
+ * @iova: the virtual address of the start of the fast memory region
+ *
+ * This may be called from interrupt context.
+ */
+
+int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
+ int list_len, u64 iova)
+{
+ struct ipath_fmr *fmr = to_ifmr(ibfmr);
+ struct ipath_lkey_table *rkt;
+ unsigned long flags;
+ int m, n, i;
+ u32 ps;
+ int ret;
+
+ if (list_len > fmr->mr.max_segs) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ rkt = &to_idev(ibfmr->device)->lk_table;
+ spin_lock_irqsave(&rkt->lock, flags);
+ fmr->mr.user_base = iova;
+ fmr->mr.iova = iova;
+ ps = 1 << fmr->page_shift;
+ fmr->mr.length = list_len * ps;
+ m = 0;
+ n = 0;
+ ps = 1 << fmr->page_shift;
+ for (i = 0; i < list_len; i++) {
+ fmr->mr.map[m]->segs[n].vaddr = (void *) page_list[i];
+ fmr->mr.map[m]->segs[n].length = ps;
+ if (++n == IPATH_SEGSZ) {
+ m++;
+ n = 0;
+ }
+ }
+ spin_unlock_irqrestore(&rkt->lock, flags);
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_unmap_fmr - unmap fast memory regions
+ * @fmr_list: the list of fast memory regions to unmap
+ *
+ * Returns 0 on success.
+ */
+int ipath_unmap_fmr(struct list_head *fmr_list)
+{
+ struct ipath_fmr *fmr;
+ struct ipath_lkey_table *rkt;
+ unsigned long flags;
+
+ list_for_each_entry(fmr, fmr_list, ibfmr.list) {
+ rkt = &to_idev(fmr->ibfmr.device)->lk_table;
+ spin_lock_irqsave(&rkt->lock, flags);
+ fmr->mr.user_base = 0;
+ fmr->mr.iova = 0;
+ fmr->mr.length = 0;
+ spin_unlock_irqrestore(&rkt->lock, flags);
+ }
+ return 0;
+}
+
+/**
+ * ipath_dealloc_fmr - deallocate a fast memory region
+ * @ibfmr: the fast memory region to deallocate
+ *
+ * Returns 0 on success.
+ */
+int ipath_dealloc_fmr(struct ib_fmr *ibfmr)
+{
+ struct ipath_fmr *fmr = to_ifmr(ibfmr);
+ int i;
+
+ ipath_free_lkey(&to_idev(ibfmr->device)->lk_table, ibfmr->lkey);
+ i = fmr->mr.mapsz;
+ while (i)
+ kfree(fmr->mr.map[--i]);
+ kfree(fmr);
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+#define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE)
+#define BITS_PER_PAGE_MASK (BITS_PER_PAGE-1)
+#define mk_qpn(qpt, map, off) (((map) - (qpt)->map) * BITS_PER_PAGE + \
+ (off))
+#define find_next_offset(map, off) find_next_zero_bit((map)->page, \
+ BITS_PER_PAGE, off)
+
+/*
+ * Convert the AETH credit code into the number of credits.
+ */
+static u32 credit_table[31] = {
+ 0, /* 0 */
+ 1, /* 1 */
+ 2, /* 2 */
+ 3, /* 3 */
+ 4, /* 4 */
+ 6, /* 5 */
+ 8, /* 6 */
+ 12, /* 7 */
+ 16, /* 8 */
+ 24, /* 9 */
+ 32, /* A */
+ 48, /* B */
+ 64, /* C */
+ 96, /* D */
+ 128, /* E */
+ 192, /* F */
+ 256, /* 10 */
+ 384, /* 11 */
+ 512, /* 12 */
+ 768, /* 13 */
+ 1024, /* 14 */
+ 1536, /* 15 */
+ 2048, /* 16 */
+ 3072, /* 17 */
+ 4096, /* 18 */
+ 6144, /* 19 */
+ 8192, /* 1A */
+ 12288, /* 1B */
+ 16384, /* 1C */
+ 24576, /* 1D */
+ 32768 /* 1E */
+};
+
+
+static void get_map_page(struct ipath_qp_table *qpt, struct qpn_map *map)
+{
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ unsigned long flags;
+
+ /*
+ * Free the page if someone raced with us installing it.
+ */
+
+ spin_lock_irqsave(&qpt->lock, flags);
+ if (map->page)
+ free_page(page);
+ else
+ map->page = (void *)page;
+ spin_unlock_irqrestore(&qpt->lock, flags);
+}
+
+
+static int alloc_qpn(struct ipath_qp_table *qpt, enum ib_qp_type type)
+{
+ u32 i, offset, max_scan, qpn;
+ struct qpn_map *map;
+ u32 ret = -1;
+
+ if (type == IB_QPT_SMI)
+ ret = 0;
+ else if (type == IB_QPT_GSI)
+ ret = 1;
+
+ if (ret != -1) {
+ map = &qpt->map[0];
+ if (unlikely(!map->page)) {
+ get_map_page(qpt, map);
+ if (unlikely(!map->page)) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ }
+ if (!test_and_set_bit(ret, map->page))
+ atomic_dec(&map->n_free);
+ else
+ ret = -EBUSY;
+ goto bail;
+ }
+
+ qpn = qpt->last + 1;
+ if (qpn >= QPN_MAX)
+ qpn = 2;
+ offset = qpn & BITS_PER_PAGE_MASK;
+ map = &qpt->map[qpn / BITS_PER_PAGE];
+ max_scan = qpt->nmaps - !offset;
+ for (i = 0;;) {
+ if (unlikely(!map->page)) {
+ get_map_page(qpt, map);
+ if (unlikely(!map->page))
+ break;
+ }
+ if (likely(atomic_read(&map->n_free))) {
+ do {
+ if (!test_and_set_bit(offset, map->page)) {
+ atomic_dec(&map->n_free);
+ qpt->last = qpn;
+ ret = qpn;
+ goto bail;
+ }
+ offset = find_next_offset(map, offset);
+ qpn = mk_qpn(qpt, map, offset);
+ /*
+ * This test differs from alloc_pidmap().
+ * If find_next_offset() does find a zero
+ * bit, we don't need to check for QPN
+ * wrapping around past our starting QPN.
+ * We just need to be sure we don't loop
+ * forever.
+ */
+ } while (offset < BITS_PER_PAGE && qpn < QPN_MAX);
+ }
+ /*
+ * In order to keep the number of pages allocated to a
+ * minimum, we scan the all existing pages before increasing
+ * the size of the bitmap table.
+ */
+ if (++i > max_scan) {
+ if (qpt->nmaps == QPNMAP_ENTRIES)
+ break;
+ map = &qpt->map[qpt->nmaps++];
+ offset = 0;
+ } else if (map < &qpt->map[qpt->nmaps]) {
+ ++map;
+ offset = 0;
+ } else {
+ map = &qpt->map[0];
+ offset = 2;
+ }
+ qpn = mk_qpn(qpt, map, offset);
+ }
+
+ ret = -ENOMEM;
+
+bail:
+ return ret;
+}
+
+static void free_qpn(struct ipath_qp_table *qpt, u32 qpn)
+{
+ struct qpn_map *map;
+
+ map = qpt->map + qpn / BITS_PER_PAGE;
+ if (map->page)
+ clear_bit(qpn & BITS_PER_PAGE_MASK, map->page);
+ atomic_inc(&map->n_free);
+}
+
+/**
+ * ipath_alloc_qpn - allocate a QP number
+ * @qpt: the QP table
+ * @qp: the QP
+ * @type: the QP type (IB_QPT_SMI and IB_QPT_GSI are special)
+ *
+ * Allocate the next available QPN and put the QP into the hash table.
+ * The hash table holds a reference to the QP.
+ */
+static int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
+ enum ib_qp_type type)
+{
+ unsigned long flags;
+ int ret;
+
+ ret = alloc_qpn(qpt, type);
+ if (ret < 0)
+ goto bail;
+ qp->ibqp.qp_num = ret;
+
+ /* Add the QP to the hash table. */
+ spin_lock_irqsave(&qpt->lock, flags);
+
+ ret %= qpt->max;
+ qp->next = qpt->table[ret];
+ qpt->table[ret] = qp;
+ atomic_inc(&qp->refcount);
+
+ spin_unlock_irqrestore(&qpt->lock, flags);
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_free_qp - remove a QP from the QP table
+ * @qpt: the QP table
+ * @qp: the QP to remove
+ *
+ * Remove the QP from the table so it can't be found asynchronously by
+ * the receive interrupt routine.
+ */
+static void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
+{
+ struct ipath_qp *q, **qpp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qpt->lock, flags);
+
+ /* Remove QP from the hash table. */
+ qpp = &qpt->table[qp->ibqp.qp_num % qpt->max];
+ for (; (q = *qpp) != NULL; qpp = &q->next) {
+ if (q == qp) {
+ *qpp = qp->next;
+ qp->next = NULL;
+ atomic_dec(&qp->refcount);
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&qpt->lock, flags);
+}
+
+/**
+ * ipath_free_all_qps - check for QPs still in use
+ * @qpt: the QP table to empty
+ *
+ * There should not be any QPs still in use.
+ * Free memory for table.
+ */
+unsigned ipath_free_all_qps(struct ipath_qp_table *qpt)
+{
+ unsigned long flags;
+ struct ipath_qp *qp;
+ u32 n, qp_inuse = 0;
+
+ spin_lock_irqsave(&qpt->lock, flags);
+ for (n = 0; n < qpt->max; n++) {
+ qp = qpt->table[n];
+ qpt->table[n] = NULL;
+
+ for (; qp; qp = qp->next)
+ qp_inuse++;
+ }
+ spin_unlock_irqrestore(&qpt->lock, flags);
+
+ for (n = 0; n < ARRAY_SIZE(qpt->map); n++)
+ if (qpt->map[n].page)
+ free_page((unsigned long) qpt->map[n].page);
+ return qp_inuse;
+}
+
+/**
+ * ipath_lookup_qpn - return the QP with the given QPN
+ * @qpt: the QP table
+ * @qpn: the QP number to look up
+ *
+ * The caller is responsible for decrementing the QP reference count
+ * when done.
+ */
+struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn)
+{
+ unsigned long flags;
+ struct ipath_qp *qp;
+
+ spin_lock_irqsave(&qpt->lock, flags);
+
+ for (qp = qpt->table[qpn % qpt->max]; qp; qp = qp->next) {
+ if (qp->ibqp.qp_num == qpn) {
+ atomic_inc(&qp->refcount);
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&qpt->lock, flags);
+ return qp;
+}
+
+/**
+ * ipath_reset_qp - initialize the QP state to the reset state
+ * @qp: the QP to reset
+ * @type: the QP type
+ */
+static void ipath_reset_qp(struct ipath_qp *qp, enum ib_qp_type type)
+{
+ qp->remote_qpn = 0;
+ qp->qkey = 0;
+ qp->qp_access_flags = 0;
+ atomic_set(&qp->s_dma_busy, 0);
+ qp->s_flags &= IPATH_S_SIGNAL_REQ_WR;
+ qp->s_hdrwords = 0;
+ qp->s_wqe = NULL;
+ qp->s_pkt_delay = 0;
+ qp->s_draining = 0;
+ qp->s_psn = 0;
+ qp->r_psn = 0;
+ qp->r_msn = 0;
+ if (type == IB_QPT_RC) {
+ qp->s_state = IB_OPCODE_RC_SEND_LAST;
+ qp->r_state = IB_OPCODE_RC_SEND_LAST;
+ } else {
+ qp->s_state = IB_OPCODE_UC_SEND_LAST;
+ qp->r_state = IB_OPCODE_UC_SEND_LAST;
+ }
+ qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
+ qp->r_nak_state = 0;
+ qp->r_aflags = 0;
+ qp->r_flags = 0;
+ qp->s_rnr_timeout = 0;
+ qp->s_head = 0;
+ qp->s_tail = 0;
+ qp->s_cur = 0;
+ qp->s_last = 0;
+ qp->s_ssn = 1;
+ qp->s_lsn = 0;
+ memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue));
+ qp->r_head_ack_queue = 0;
+ qp->s_tail_ack_queue = 0;
+ qp->s_num_rd_atomic = 0;
+ if (qp->r_rq.wq) {
+ qp->r_rq.wq->head = 0;
+ qp->r_rq.wq->tail = 0;
+ }
+}
+
+/**
+ * ipath_error_qp - put a QP into the error state
+ * @qp: the QP to put into the error state
+ * @err: the receive completion error to signal if a RWQE is active
+ *
+ * Flushes both send and receive work queues.
+ * Returns true if last WQE event should be generated.
+ * The QP s_lock should be held and interrupts disabled.
+ * If we are already in error state, just return.
+ */
+
+int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ib_wc wc;
+ int ret = 0;
+
+ if (qp->state == IB_QPS_ERR)
+ goto bail;
+
+ qp->state = IB_QPS_ERR;
+
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+
+ /* Schedule the sending tasklet to drain the send work queue. */
+ if (qp->s_last != qp->s_head)
+ ipath_schedule_send(qp);
+
+ memset(&wc, 0, sizeof(wc));
+ wc.qp = &qp->ibqp;
+ wc.opcode = IB_WC_RECV;
+
+ if (test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags)) {
+ wc.wr_id = qp->r_wr_id;
+ wc.status = err;
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
+ }
+ wc.status = IB_WC_WR_FLUSH_ERR;
+
+ if (qp->r_rq.wq) {
+ struct ipath_rwq *wq;
+ u32 head;
+ u32 tail;
+
+ spin_lock(&qp->r_rq.lock);
+
+ /* sanity check pointers before trusting them */
+ wq = qp->r_rq.wq;
+ head = wq->head;
+ if (head >= qp->r_rq.size)
+ head = 0;
+ tail = wq->tail;
+ if (tail >= qp->r_rq.size)
+ tail = 0;
+ while (tail != head) {
+ wc.wr_id = get_rwqe_ptr(&qp->r_rq, tail)->wr_id;
+ if (++tail >= qp->r_rq.size)
+ tail = 0;
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
+ }
+ wq->tail = tail;
+
+ spin_unlock(&qp->r_rq.lock);
+ } else if (qp->ibqp.event_handler)
+ ret = 1;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_modify_qp - modify the attributes of a queue pair
+ * @ibqp: the queue pair who's attributes we're modifying
+ * @attr: the new attributes
+ * @attr_mask: the mask of attributes to modify
+ * @udata: user data for ipathverbs.so
+ *
+ * Returns 0 on success, otherwise returns an errno.
+ */
+int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_udata *udata)
+{
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
+ struct ipath_qp *qp = to_iqp(ibqp);
+ enum ib_qp_state cur_state, new_state;
+ int lastwqe = 0;
+ int ret;
+
+ spin_lock_irq(&qp->s_lock);
+
+ cur_state = attr_mask & IB_QP_CUR_STATE ?
+ attr->cur_qp_state : qp->state;
+ new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state;
+
+ if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type,
+ attr_mask, IB_LINK_LAYER_UNSPECIFIED))
+ goto inval;
+
+ if (attr_mask & IB_QP_AV) {
+ if (attr->ah_attr.dlid == 0 ||
+ attr->ah_attr.dlid >= IPATH_MULTICAST_LID_BASE)
+ goto inval;
+
+ if ((attr->ah_attr.ah_flags & IB_AH_GRH) &&
+ (attr->ah_attr.grh.sgid_index > 1))
+ goto inval;
+ }
+
+ if (attr_mask & IB_QP_PKEY_INDEX)
+ if (attr->pkey_index >= ipath_get_npkeys(dev->dd))
+ goto inval;
+
+ if (attr_mask & IB_QP_MIN_RNR_TIMER)
+ if (attr->min_rnr_timer > 31)
+ goto inval;
+
+ if (attr_mask & IB_QP_PORT)
+ if (attr->port_num == 0 ||
+ attr->port_num > ibqp->device->phys_port_cnt)
+ goto inval;
+
+ /*
+ * don't allow invalid Path MTU values or greater than 2048
+ * unless we are configured for a 4KB MTU
+ */
+ if ((attr_mask & IB_QP_PATH_MTU) &&
+ (ib_mtu_enum_to_int(attr->path_mtu) == -1 ||
+ (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096)))
+ goto inval;
+
+ if (attr_mask & IB_QP_PATH_MIG_STATE)
+ if (attr->path_mig_state != IB_MIG_MIGRATED &&
+ attr->path_mig_state != IB_MIG_REARM)
+ goto inval;
+
+ if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+ if (attr->max_dest_rd_atomic > IPATH_MAX_RDMA_ATOMIC)
+ goto inval;
+
+ switch (new_state) {
+ case IB_QPS_RESET:
+ if (qp->state != IB_QPS_RESET) {
+ qp->state = IB_QPS_RESET;
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ spin_unlock_irq(&qp->s_lock);
+ /* Stop the sending tasklet */
+ tasklet_kill(&qp->s_task);
+ wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
+ spin_lock_irq(&qp->s_lock);
+ }
+ ipath_reset_qp(qp, ibqp->qp_type);
+ break;
+
+ case IB_QPS_SQD:
+ qp->s_draining = qp->s_last != qp->s_cur;
+ qp->state = new_state;
+ break;
+
+ case IB_QPS_SQE:
+ if (qp->ibqp.qp_type == IB_QPT_RC)
+ goto inval;
+ qp->state = new_state;
+ break;
+
+ case IB_QPS_ERR:
+ lastwqe = ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
+ break;
+
+ default:
+ qp->state = new_state;
+ break;
+ }
+
+ if (attr_mask & IB_QP_PKEY_INDEX)
+ qp->s_pkey_index = attr->pkey_index;
+
+ if (attr_mask & IB_QP_DEST_QPN)
+ qp->remote_qpn = attr->dest_qp_num;
+
+ if (attr_mask & IB_QP_SQ_PSN) {
+ qp->s_psn = qp->s_next_psn = attr->sq_psn;
+ qp->s_last_psn = qp->s_next_psn - 1;
+ }
+
+ if (attr_mask & IB_QP_RQ_PSN)
+ qp->r_psn = attr->rq_psn;
+
+ if (attr_mask & IB_QP_ACCESS_FLAGS)
+ qp->qp_access_flags = attr->qp_access_flags;
+
+ if (attr_mask & IB_QP_AV) {
+ qp->remote_ah_attr = attr->ah_attr;
+ qp->s_dmult = ipath_ib_rate_to_mult(attr->ah_attr.static_rate);
+ }
+
+ if (attr_mask & IB_QP_PATH_MTU)
+ qp->path_mtu = attr->path_mtu;
+
+ if (attr_mask & IB_QP_RETRY_CNT)
+ qp->s_retry = qp->s_retry_cnt = attr->retry_cnt;
+
+ if (attr_mask & IB_QP_RNR_RETRY) {
+ qp->s_rnr_retry = attr->rnr_retry;
+ if (qp->s_rnr_retry > 7)
+ qp->s_rnr_retry = 7;
+ qp->s_rnr_retry_cnt = qp->s_rnr_retry;
+ }
+
+ if (attr_mask & IB_QP_MIN_RNR_TIMER)
+ qp->r_min_rnr_timer = attr->min_rnr_timer;
+
+ if (attr_mask & IB_QP_TIMEOUT)
+ qp->timeout = attr->timeout;
+
+ if (attr_mask & IB_QP_QKEY)
+ qp->qkey = attr->qkey;
+
+ if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+ qp->r_max_rd_atomic = attr->max_dest_rd_atomic;
+
+ if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
+ qp->s_max_rd_atomic = attr->max_rd_atomic;
+
+ spin_unlock_irq(&qp->s_lock);
+
+ if (lastwqe) {
+ struct ib_event ev;
+
+ ev.device = qp->ibqp.device;
+ ev.element.qp = &qp->ibqp;
+ ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
+ qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
+ }
+ ret = 0;
+ goto bail;
+
+inval:
+ spin_unlock_irq(&qp->s_lock);
+ ret = -EINVAL;
+
+bail:
+ return ret;
+}
+
+int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_qp_init_attr *init_attr)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+
+ attr->qp_state = qp->state;
+ attr->cur_qp_state = attr->qp_state;
+ attr->path_mtu = qp->path_mtu;
+ attr->path_mig_state = 0;
+ attr->qkey = qp->qkey;
+ attr->rq_psn = qp->r_psn;
+ attr->sq_psn = qp->s_next_psn;
+ attr->dest_qp_num = qp->remote_qpn;
+ attr->qp_access_flags = qp->qp_access_flags;
+ attr->cap.max_send_wr = qp->s_size - 1;
+ attr->cap.max_recv_wr = qp->ibqp.srq ? 0 : qp->r_rq.size - 1;
+ attr->cap.max_send_sge = qp->s_max_sge;
+ attr->cap.max_recv_sge = qp->r_rq.max_sge;
+ attr->cap.max_inline_data = 0;
+ attr->ah_attr = qp->remote_ah_attr;
+ memset(&attr->alt_ah_attr, 0, sizeof(attr->alt_ah_attr));
+ attr->pkey_index = qp->s_pkey_index;
+ attr->alt_pkey_index = 0;
+ attr->en_sqd_async_notify = 0;
+ attr->sq_draining = qp->s_draining;
+ attr->max_rd_atomic = qp->s_max_rd_atomic;
+ attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
+ attr->min_rnr_timer = qp->r_min_rnr_timer;
+ attr->port_num = 1;
+ attr->timeout = qp->timeout;
+ attr->retry_cnt = qp->s_retry_cnt;
+ attr->rnr_retry = qp->s_rnr_retry_cnt;
+ attr->alt_port_num = 0;
+ attr->alt_timeout = 0;
+
+ init_attr->event_handler = qp->ibqp.event_handler;
+ init_attr->qp_context = qp->ibqp.qp_context;
+ init_attr->send_cq = qp->ibqp.send_cq;
+ init_attr->recv_cq = qp->ibqp.recv_cq;
+ init_attr->srq = qp->ibqp.srq;
+ init_attr->cap = attr->cap;
+ if (qp->s_flags & IPATH_S_SIGNAL_REQ_WR)
+ init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
+ else
+ init_attr->sq_sig_type = IB_SIGNAL_ALL_WR;
+ init_attr->qp_type = qp->ibqp.qp_type;
+ init_attr->port_num = 1;
+ return 0;
+}
+
+/**
+ * ipath_compute_aeth - compute the AETH (syndrome + MSN)
+ * @qp: the queue pair to compute the AETH for
+ *
+ * Returns the AETH.
+ */
+__be32 ipath_compute_aeth(struct ipath_qp *qp)
+{
+ u32 aeth = qp->r_msn & IPATH_MSN_MASK;
+
+ if (qp->ibqp.srq) {
+ /*
+ * Shared receive queues don't generate credits.
+ * Set the credit field to the invalid value.
+ */
+ aeth |= IPATH_AETH_CREDIT_INVAL << IPATH_AETH_CREDIT_SHIFT;
+ } else {
+ u32 min, max, x;
+ u32 credits;
+ struct ipath_rwq *wq = qp->r_rq.wq;
+ u32 head;
+ u32 tail;
+
+ /* sanity check pointers before trusting them */
+ head = wq->head;
+ if (head >= qp->r_rq.size)
+ head = 0;
+ tail = wq->tail;
+ if (tail >= qp->r_rq.size)
+ tail = 0;
+ /*
+ * Compute the number of credits available (RWQEs).
+ * XXX Not holding the r_rq.lock here so there is a small
+ * chance that the pair of reads are not atomic.
+ */
+ credits = head - tail;
+ if ((int)credits < 0)
+ credits += qp->r_rq.size;
+ /*
+ * Binary search the credit table to find the code to
+ * use.
+ */
+ min = 0;
+ max = 31;
+ for (;;) {
+ x = (min + max) / 2;
+ if (credit_table[x] == credits)
+ break;
+ if (credit_table[x] > credits)
+ max = x;
+ else if (min == x)
+ break;
+ else
+ min = x;
+ }
+ aeth |= x << IPATH_AETH_CREDIT_SHIFT;
+ }
+ return cpu_to_be32(aeth);
+}
+
+/**
+ * ipath_create_qp - create a queue pair for a device
+ * @ibpd: the protection domain who's device we create the queue pair for
+ * @init_attr: the attributes of the queue pair
+ * @udata: unused by InfiniPath
+ *
+ * Returns the queue pair on success, otherwise returns an errno.
+ *
+ * Called by the ib_create_qp() core verbs function.
+ */
+struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
+ struct ib_qp_init_attr *init_attr,
+ struct ib_udata *udata)
+{
+ struct ipath_qp *qp;
+ int err;
+ struct ipath_swqe *swq = NULL;
+ struct ipath_ibdev *dev;
+ size_t sz;
+ size_t sg_list_sz;
+ struct ib_qp *ret;
+
+ if (init_attr->create_flags) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ /* Check receive queue parameters if no SRQ is specified. */
+ if (!init_attr->srq) {
+ if (init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+ if (init_attr->cap.max_send_sge +
+ init_attr->cap.max_send_wr +
+ init_attr->cap.max_recv_sge +
+ init_attr->cap.max_recv_wr == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+ }
+
+ switch (init_attr->qp_type) {
+ case IB_QPT_UC:
+ case IB_QPT_RC:
+ case IB_QPT_UD:
+ case IB_QPT_SMI:
+ case IB_QPT_GSI:
+ sz = sizeof(struct ipath_sge) *
+ init_attr->cap.max_send_sge +
+ sizeof(struct ipath_swqe);
+ swq = vmalloc((init_attr->cap.max_send_wr + 1) * sz);
+ if (swq == NULL) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+ sz = sizeof(*qp);
+ sg_list_sz = 0;
+ if (init_attr->srq) {
+ struct ipath_srq *srq = to_isrq(init_attr->srq);
+
+ if (srq->rq.max_sge > 1)
+ sg_list_sz = sizeof(*qp->r_sg_list) *
+ (srq->rq.max_sge - 1);
+ } else if (init_attr->cap.max_recv_sge > 1)
+ sg_list_sz = sizeof(*qp->r_sg_list) *
+ (init_attr->cap.max_recv_sge - 1);
+ qp = kmalloc(sz + sg_list_sz, GFP_KERNEL);
+ if (!qp) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_swq;
+ }
+ if (sg_list_sz && (init_attr->qp_type == IB_QPT_UD ||
+ init_attr->qp_type == IB_QPT_SMI ||
+ init_attr->qp_type == IB_QPT_GSI)) {
+ qp->r_ud_sg_list = kmalloc(sg_list_sz, GFP_KERNEL);
+ if (!qp->r_ud_sg_list) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_qp;
+ }
+ } else
+ qp->r_ud_sg_list = NULL;
+ if (init_attr->srq) {
+ sz = 0;
+ qp->r_rq.size = 0;
+ qp->r_rq.max_sge = 0;
+ qp->r_rq.wq = NULL;
+ init_attr->cap.max_recv_wr = 0;
+ init_attr->cap.max_recv_sge = 0;
+ } else {
+ qp->r_rq.size = init_attr->cap.max_recv_wr + 1;
+ qp->r_rq.max_sge = init_attr->cap.max_recv_sge;
+ sz = (sizeof(struct ib_sge) * qp->r_rq.max_sge) +
+ sizeof(struct ipath_rwqe);
+ qp->r_rq.wq = vmalloc_user(sizeof(struct ipath_rwq) +
+ qp->r_rq.size * sz);
+ if (!qp->r_rq.wq) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_sg_list;
+ }
+ }
+
+ /*
+ * ib_create_qp() will initialize qp->ibqp
+ * except for qp->ibqp.qp_num.
+ */
+ spin_lock_init(&qp->s_lock);
+ spin_lock_init(&qp->r_rq.lock);
+ atomic_set(&qp->refcount, 0);
+ init_waitqueue_head(&qp->wait);
+ init_waitqueue_head(&qp->wait_dma);
+ tasklet_init(&qp->s_task, ipath_do_send, (unsigned long)qp);
+ INIT_LIST_HEAD(&qp->piowait);
+ INIT_LIST_HEAD(&qp->timerwait);
+ qp->state = IB_QPS_RESET;
+ qp->s_wq = swq;
+ qp->s_size = init_attr->cap.max_send_wr + 1;
+ qp->s_max_sge = init_attr->cap.max_send_sge;
+ if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR)
+ qp->s_flags = IPATH_S_SIGNAL_REQ_WR;
+ else
+ qp->s_flags = 0;
+ dev = to_idev(ibpd->device);
+ err = ipath_alloc_qpn(&dev->qp_table, qp,
+ init_attr->qp_type);
+ if (err) {
+ ret = ERR_PTR(err);
+ vfree(qp->r_rq.wq);
+ goto bail_sg_list;
+ }
+ qp->ip = NULL;
+ qp->s_tx = NULL;
+ ipath_reset_qp(qp, init_attr->qp_type);
+ break;
+
+ default:
+ /* Don't support raw QPs */
+ ret = ERR_PTR(-ENOSYS);
+ goto bail;
+ }
+
+ init_attr->cap.max_inline_data = 0;
+
+ /*
+ * Return the address of the RWQ as the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ if (!qp->r_rq.wq) {
+ __u64 offset = 0;
+
+ err = ib_copy_to_udata(udata, &offset,
+ sizeof(offset));
+ if (err) {
+ ret = ERR_PTR(err);
+ goto bail_ip;
+ }
+ } else {
+ u32 s = sizeof(struct ipath_rwq) +
+ qp->r_rq.size * sz;
+
+ qp->ip =
+ ipath_create_mmap_info(dev, s,
+ ibpd->uobject->context,
+ qp->r_rq.wq);
+ if (!qp->ip) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_ip;
+ }
+
+ err = ib_copy_to_udata(udata, &(qp->ip->offset),
+ sizeof(qp->ip->offset));
+ if (err) {
+ ret = ERR_PTR(err);
+ goto bail_ip;
+ }
+ }
+ }
+
+ spin_lock(&dev->n_qps_lock);
+ if (dev->n_qps_allocated == ib_ipath_max_qps) {
+ spin_unlock(&dev->n_qps_lock);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_ip;
+ }
+
+ dev->n_qps_allocated++;
+ spin_unlock(&dev->n_qps_lock);
+
+ if (qp->ip) {
+ spin_lock_irq(&dev->pending_lock);
+ list_add(&qp->ip->pending_mmaps, &dev->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+ }
+
+ ret = &qp->ibqp;
+ goto bail;
+
+bail_ip:
+ if (qp->ip)
+ kref_put(&qp->ip->ref, ipath_release_mmap_info);
+ else
+ vfree(qp->r_rq.wq);
+ ipath_free_qp(&dev->qp_table, qp);
+ free_qpn(&dev->qp_table, qp->ibqp.qp_num);
+bail_sg_list:
+ kfree(qp->r_ud_sg_list);
+bail_qp:
+ kfree(qp);
+bail_swq:
+ vfree(swq);
+bail:
+ return ret;
+}
+
+/**
+ * ipath_destroy_qp - destroy a queue pair
+ * @ibqp: the queue pair to destroy
+ *
+ * Returns 0 on success.
+ *
+ * Note that this can be called while the QP is actively sending or
+ * receiving!
+ */
+int ipath_destroy_qp(struct ib_qp *ibqp)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
+
+ /* Make sure HW and driver activity is stopped. */
+ spin_lock_irq(&qp->s_lock);
+ if (qp->state != IB_QPS_RESET) {
+ qp->state = IB_QPS_RESET;
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ spin_unlock_irq(&qp->s_lock);
+ /* Stop the sending tasklet */
+ tasklet_kill(&qp->s_task);
+ wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
+ } else
+ spin_unlock_irq(&qp->s_lock);
+
+ ipath_free_qp(&dev->qp_table, qp);
+
+ if (qp->s_tx) {
+ atomic_dec(&qp->refcount);
+ if (qp->s_tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
+ kfree(qp->s_tx->txreq.map_addr);
+ spin_lock_irq(&dev->pending_lock);
+ list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
+ spin_unlock_irq(&dev->pending_lock);
+ qp->s_tx = NULL;
+ }
+
+ wait_event(qp->wait, !atomic_read(&qp->refcount));
+
+ /* all user's cleaned up, mark it available */
+ free_qpn(&dev->qp_table, qp->ibqp.qp_num);
+ spin_lock(&dev->n_qps_lock);
+ dev->n_qps_allocated--;
+ spin_unlock(&dev->n_qps_lock);
+
+ if (qp->ip)
+ kref_put(&qp->ip->ref, ipath_release_mmap_info);
+ else
+ vfree(qp->r_rq.wq);
+ kfree(qp->r_ud_sg_list);
+ vfree(qp->s_wq);
+ kfree(qp);
+ return 0;
+}
+
+/**
+ * ipath_init_qp_table - initialize the QP table for a device
+ * @idev: the device who's QP table we're initializing
+ * @size: the size of the QP table
+ *
+ * Returns 0 on success, otherwise returns an errno.
+ */
+int ipath_init_qp_table(struct ipath_ibdev *idev, int size)
+{
+ int i;
+ int ret;
+
+ idev->qp_table.last = 1; /* QPN 0 and 1 are special. */
+ idev->qp_table.max = size;
+ idev->qp_table.nmaps = 1;
+ idev->qp_table.table = kzalloc(size * sizeof(*idev->qp_table.table),
+ GFP_KERNEL);
+ if (idev->qp_table.table == NULL) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(idev->qp_table.map); i++) {
+ atomic_set(&idev->qp_table.map[i].n_free, BITS_PER_PAGE);
+ idev->qp_table.map[i].page = NULL;
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_get_credit - flush the send work queue of a QP
+ * @qp: the qp who's send work queue to flush
+ * @aeth: the Acknowledge Extended Transport Header
+ *
+ * The QP s_lock should be held.
+ */
+void ipath_get_credit(struct ipath_qp *qp, u32 aeth)
+{
+ u32 credit = (aeth >> IPATH_AETH_CREDIT_SHIFT) & IPATH_AETH_CREDIT_MASK;
+
+ /*
+ * If the credit is invalid, we can send
+ * as many packets as we like. Otherwise, we have to
+ * honor the credit field.
+ */
+ if (credit == IPATH_AETH_CREDIT_INVAL)
+ qp->s_lsn = (u32) -1;
+ else if (qp->s_lsn != (u32) -1) {
+ /* Compute new LSN (i.e., MSN + credit) */
+ credit = (aeth + credit_table[credit]) & IPATH_MSN_MASK;
+ if (ipath_cmp24(credit, qp->s_lsn) > 0)
+ qp->s_lsn = credit;
+ }
+
+ /* Restart sending if it was blocked due to lack of credits. */
+ if ((qp->s_flags & IPATH_S_WAIT_SSN_CREDIT) &&
+ qp->s_cur != qp->s_head &&
+ (qp->s_lsn == (u32) -1 ||
+ ipath_cmp24(get_swqe_ptr(qp, qp->s_cur)->ssn,
+ qp->s_lsn + 1) <= 0))
+ ipath_schedule_send(qp);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/io.h>
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+/* cut down ridiculously long IB macro names */
+#define OP(x) IB_OPCODE_RC_##x
+
+static u32 restart_sge(struct ipath_sge_state *ss, struct ipath_swqe *wqe,
+ u32 psn, u32 pmtu)
+{
+ u32 len;
+
+ len = ((psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
+ ss->sge = wqe->sg_list[0];
+ ss->sg_list = wqe->sg_list + 1;
+ ss->num_sge = wqe->wr.num_sge;
+ ipath_skip_sge(ss, len);
+ return wqe->length - len;
+}
+
+/**
+ * ipath_init_restart- initialize the qp->s_sge after a restart
+ * @qp: the QP who's SGE we're restarting
+ * @wqe: the work queue to initialize the QP's SGE from
+ *
+ * The QP s_lock should be held and interrupts disabled.
+ */
+static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
+{
+ struct ipath_ibdev *dev;
+
+ qp->s_len = restart_sge(&qp->s_sge, wqe, qp->s_psn,
+ ib_mtu_enum_to_int(qp->path_mtu));
+ dev = to_idev(qp->ibqp.device);
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&qp->timerwait))
+ list_add_tail(&qp->timerwait,
+ &dev->pending[dev->pending_index]);
+ spin_unlock(&dev->pending_lock);
+}
+
+/**
+ * ipath_make_rc_ack - construct a response packet (ACK, NAK, or RDMA read)
+ * @qp: a pointer to the QP
+ * @ohdr: a pointer to the IB header being constructed
+ * @pmtu: the path MTU
+ *
+ * Return 1 if constructed; otherwise, return 0.
+ * Note that we are in the responder's side of the QP context.
+ * Note the QP s_lock must be held.
+ */
+static int ipath_make_rc_ack(struct ipath_ibdev *dev, struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr, u32 pmtu)
+{
+ struct ipath_ack_entry *e;
+ u32 hwords;
+ u32 len;
+ u32 bth0;
+ u32 bth2;
+
+ /* Don't send an ACK if we aren't supposed to. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto bail;
+
+ /* header size in 32-bit words LRH+BTH = (8+12)/4. */
+ hwords = 5;
+
+ switch (qp->s_ack_state) {
+ case OP(RDMA_READ_RESPONSE_LAST):
+ case OP(RDMA_READ_RESPONSE_ONLY):
+ case OP(ATOMIC_ACKNOWLEDGE):
+ /*
+ * We can increment the tail pointer now that the last
+ * response has been sent instead of only being
+ * constructed.
+ */
+ if (++qp->s_tail_ack_queue > IPATH_MAX_RDMA_ATOMIC)
+ qp->s_tail_ack_queue = 0;
+ /* FALLTHROUGH */
+ case OP(SEND_ONLY):
+ case OP(ACKNOWLEDGE):
+ /* Check for no next entry in the queue. */
+ if (qp->r_head_ack_queue == qp->s_tail_ack_queue) {
+ if (qp->s_flags & IPATH_S_ACK_PENDING)
+ goto normal;
+ qp->s_ack_state = OP(ACKNOWLEDGE);
+ goto bail;
+ }
+
+ e = &qp->s_ack_queue[qp->s_tail_ack_queue];
+ if (e->opcode == OP(RDMA_READ_REQUEST)) {
+ /* Copy SGE state in case we need to resend */
+ qp->s_ack_rdma_sge = e->rdma_sge;
+ qp->s_cur_sge = &qp->s_ack_rdma_sge;
+ len = e->rdma_sge.sge.sge_length;
+ if (len > pmtu) {
+ len = pmtu;
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_FIRST);
+ } else {
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_ONLY);
+ e->sent = 1;
+ }
+ ohdr->u.aeth = ipath_compute_aeth(qp);
+ hwords++;
+ qp->s_ack_rdma_psn = e->psn;
+ bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
+ } else {
+ /* COMPARE_SWAP or FETCH_ADD */
+ qp->s_cur_sge = NULL;
+ len = 0;
+ qp->s_ack_state = OP(ATOMIC_ACKNOWLEDGE);
+ ohdr->u.at.aeth = ipath_compute_aeth(qp);
+ ohdr->u.at.atomic_ack_eth[0] =
+ cpu_to_be32(e->atomic_data >> 32);
+ ohdr->u.at.atomic_ack_eth[1] =
+ cpu_to_be32(e->atomic_data);
+ hwords += sizeof(ohdr->u.at) / sizeof(u32);
+ bth2 = e->psn;
+ e->sent = 1;
+ }
+ bth0 = qp->s_ack_state << 24;
+ break;
+
+ case OP(RDMA_READ_RESPONSE_FIRST):
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_MIDDLE);
+ /* FALLTHROUGH */
+ case OP(RDMA_READ_RESPONSE_MIDDLE):
+ len = qp->s_ack_rdma_sge.sge.sge_length;
+ if (len > pmtu)
+ len = pmtu;
+ else {
+ ohdr->u.aeth = ipath_compute_aeth(qp);
+ hwords++;
+ qp->s_ack_state = OP(RDMA_READ_RESPONSE_LAST);
+ qp->s_ack_queue[qp->s_tail_ack_queue].sent = 1;
+ }
+ bth0 = qp->s_ack_state << 24;
+ bth2 = qp->s_ack_rdma_psn++ & IPATH_PSN_MASK;
+ break;
+
+ default:
+ normal:
+ /*
+ * Send a regular ACK.
+ * Set the s_ack_state so we wait until after sending
+ * the ACK before setting s_ack_state to ACKNOWLEDGE
+ * (see above).
+ */
+ qp->s_ack_state = OP(SEND_ONLY);
+ qp->s_flags &= ~IPATH_S_ACK_PENDING;
+ qp->s_cur_sge = NULL;
+ if (qp->s_nak_state)
+ ohdr->u.aeth =
+ cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
+ (qp->s_nak_state <<
+ IPATH_AETH_CREDIT_SHIFT));
+ else
+ ohdr->u.aeth = ipath_compute_aeth(qp);
+ hwords++;
+ len = 0;
+ bth0 = OP(ACKNOWLEDGE) << 24;
+ bth2 = qp->s_ack_psn & IPATH_PSN_MASK;
+ }
+ qp->s_hdrwords = hwords;
+ qp->s_cur_size = len;
+ ipath_make_ruc_header(dev, qp, ohdr, bth0, bth2);
+ return 1;
+
+bail:
+ return 0;
+}
+
+/**
+ * ipath_make_rc_req - construct a request packet (SEND, RDMA r/w, ATOMIC)
+ * @qp: a pointer to the QP
+ *
+ * Return 1 if constructed; otherwise, return 0.
+ */
+int ipath_make_rc_req(struct ipath_qp *qp)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_other_headers *ohdr;
+ struct ipath_sge_state *ss;
+ struct ipath_swqe *wqe;
+ u32 hwords;
+ u32 len;
+ u32 bth0;
+ u32 bth2;
+ u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ char newreq;
+ unsigned long flags;
+ int ret = 0;
+
+ ohdr = &qp->s_hdr.u.oth;
+ if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
+ ohdr = &qp->s_hdr.u.l.oth;
+
+ /*
+ * The lock is needed to synchronize between the sending tasklet,
+ * the receive interrupt handler, and timeout resends.
+ */
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Sending responses has higher priority over sending requests. */
+ if ((qp->r_head_ack_queue != qp->s_tail_ack_queue ||
+ (qp->s_flags & IPATH_S_ACK_PENDING) ||
+ qp->s_ack_state != OP(ACKNOWLEDGE)) &&
+ ipath_make_rc_ack(dev, qp, ohdr, pmtu))
+ goto done;
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+ goto done;
+ }
+
+ /* Leave BUSY set until RNR timeout. */
+ if (qp->s_rnr_timeout) {
+ qp->s_flags |= IPATH_S_WAITING;
+ goto bail;
+ }
+
+ /* header size in 32-bit words LRH+BTH = (8+12)/4. */
+ hwords = 5;
+ bth0 = 1 << 22; /* Set M bit */
+
+ /* Send a request. */
+ wqe = get_swqe_ptr(qp, qp->s_cur);
+ switch (qp->s_state) {
+ default:
+ if (!(ib_ipath_state_ops[qp->state] &
+ IPATH_PROCESS_NEXT_SEND_OK))
+ goto bail;
+ /*
+ * Resend an old request or start a new one.
+ *
+ * We keep track of the current SWQE so that
+ * we don't reset the "furthest progress" state
+ * if we need to back up.
+ */
+ newreq = 0;
+ if (qp->s_cur == qp->s_tail) {
+ /* Check if send work queue is empty. */
+ if (qp->s_tail == qp->s_head)
+ goto bail;
+ /*
+ * If a fence is requested, wait for previous
+ * RDMA read and atomic operations to finish.
+ */
+ if ((wqe->wr.send_flags & IB_SEND_FENCE) &&
+ qp->s_num_rd_atomic) {
+ qp->s_flags |= IPATH_S_FENCE_PENDING;
+ goto bail;
+ }
+ wqe->psn = qp->s_next_psn;
+ newreq = 1;
+ }
+ /*
+ * Note that we have to be careful not to modify the
+ * original work request since we may need to resend
+ * it.
+ */
+ len = wqe->length;
+ ss = &qp->s_sge;
+ bth2 = 0;
+ switch (wqe->wr.opcode) {
+ case IB_WR_SEND:
+ case IB_WR_SEND_WITH_IMM:
+ /* If no credit, return. */
+ if (qp->s_lsn != (u32) -1 &&
+ ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
+ qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
+ goto bail;
+ }
+ wqe->lpsn = wqe->psn;
+ if (len > pmtu) {
+ wqe->lpsn += (len - 1) / pmtu;
+ qp->s_state = OP(SEND_FIRST);
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_SEND)
+ qp->s_state = OP(SEND_ONLY);
+ else {
+ qp->s_state = OP(SEND_ONLY_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ }
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ bth2 = 1 << 31; /* Request ACK. */
+ if (++qp->s_cur == qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case IB_WR_RDMA_WRITE:
+ if (newreq && qp->s_lsn != (u32) -1)
+ qp->s_lsn++;
+ /* FALLTHROUGH */
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ /* If no credit, return. */
+ if (qp->s_lsn != (u32) -1 &&
+ ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
+ qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
+ goto bail;
+ }
+ ohdr->u.rc.reth.vaddr =
+ cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
+ ohdr->u.rc.reth.rkey =
+ cpu_to_be32(wqe->wr.wr.rdma.rkey);
+ ohdr->u.rc.reth.length = cpu_to_be32(len);
+ hwords += sizeof(struct ib_reth) / sizeof(u32);
+ wqe->lpsn = wqe->psn;
+ if (len > pmtu) {
+ wqe->lpsn += (len - 1) / pmtu;
+ qp->s_state = OP(RDMA_WRITE_FIRST);
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
+ qp->s_state = OP(RDMA_WRITE_ONLY);
+ else {
+ qp->s_state =
+ OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
+ /* Immediate data comes after RETH */
+ ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ }
+ bth2 = 1 << 31; /* Request ACK. */
+ if (++qp->s_cur == qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case IB_WR_RDMA_READ:
+ /*
+ * Don't allow more operations to be started
+ * than the QP limits allow.
+ */
+ if (newreq) {
+ if (qp->s_num_rd_atomic >=
+ qp->s_max_rd_atomic) {
+ qp->s_flags |= IPATH_S_RDMAR_PENDING;
+ goto bail;
+ }
+ qp->s_num_rd_atomic++;
+ if (qp->s_lsn != (u32) -1)
+ qp->s_lsn++;
+ /*
+ * Adjust s_next_psn to count the
+ * expected number of responses.
+ */
+ if (len > pmtu)
+ qp->s_next_psn += (len - 1) / pmtu;
+ wqe->lpsn = qp->s_next_psn++;
+ }
+ ohdr->u.rc.reth.vaddr =
+ cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
+ ohdr->u.rc.reth.rkey =
+ cpu_to_be32(wqe->wr.wr.rdma.rkey);
+ ohdr->u.rc.reth.length = cpu_to_be32(len);
+ qp->s_state = OP(RDMA_READ_REQUEST);
+ hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
+ ss = NULL;
+ len = 0;
+ if (++qp->s_cur == qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case IB_WR_ATOMIC_CMP_AND_SWP:
+ case IB_WR_ATOMIC_FETCH_AND_ADD:
+ /*
+ * Don't allow more operations to be started
+ * than the QP limits allow.
+ */
+ if (newreq) {
+ if (qp->s_num_rd_atomic >=
+ qp->s_max_rd_atomic) {
+ qp->s_flags |= IPATH_S_RDMAR_PENDING;
+ goto bail;
+ }
+ qp->s_num_rd_atomic++;
+ if (qp->s_lsn != (u32) -1)
+ qp->s_lsn++;
+ wqe->lpsn = wqe->psn;
+ }
+ if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP) {
+ qp->s_state = OP(COMPARE_SWAP);
+ ohdr->u.atomic_eth.swap_data = cpu_to_be64(
+ wqe->wr.wr.atomic.swap);
+ ohdr->u.atomic_eth.compare_data = cpu_to_be64(
+ wqe->wr.wr.atomic.compare_add);
+ } else {
+ qp->s_state = OP(FETCH_ADD);
+ ohdr->u.atomic_eth.swap_data = cpu_to_be64(
+ wqe->wr.wr.atomic.compare_add);
+ ohdr->u.atomic_eth.compare_data = 0;
+ }
+ ohdr->u.atomic_eth.vaddr[0] = cpu_to_be32(
+ wqe->wr.wr.atomic.remote_addr >> 32);
+ ohdr->u.atomic_eth.vaddr[1] = cpu_to_be32(
+ wqe->wr.wr.atomic.remote_addr);
+ ohdr->u.atomic_eth.rkey = cpu_to_be32(
+ wqe->wr.wr.atomic.rkey);
+ hwords += sizeof(struct ib_atomic_eth) / sizeof(u32);
+ ss = NULL;
+ len = 0;
+ if (++qp->s_cur == qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ default:
+ goto bail;
+ }
+ qp->s_sge.sge = wqe->sg_list[0];
+ qp->s_sge.sg_list = wqe->sg_list + 1;
+ qp->s_sge.num_sge = wqe->wr.num_sge;
+ qp->s_len = wqe->length;
+ if (newreq) {
+ qp->s_tail++;
+ if (qp->s_tail >= qp->s_size)
+ qp->s_tail = 0;
+ }
+ bth2 |= qp->s_psn & IPATH_PSN_MASK;
+ if (wqe->wr.opcode == IB_WR_RDMA_READ)
+ qp->s_psn = wqe->lpsn + 1;
+ else {
+ qp->s_psn++;
+ if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
+ qp->s_next_psn = qp->s_psn;
+ }
+ /*
+ * Put the QP on the pending list so lost ACKs will cause
+ * a retry. More than one request can be pending so the
+ * QP may already be on the dev->pending list.
+ */
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&qp->timerwait))
+ list_add_tail(&qp->timerwait,
+ &dev->pending[dev->pending_index]);
+ spin_unlock(&dev->pending_lock);
+ break;
+
+ case OP(RDMA_READ_RESPONSE_FIRST):
+ /*
+ * This case can only happen if a send is restarted.
+ * See ipath_restart_rc().
+ */
+ ipath_init_restart(qp, wqe);
+ /* FALLTHROUGH */
+ case OP(SEND_FIRST):
+ qp->s_state = OP(SEND_MIDDLE);
+ /* FALLTHROUGH */
+ case OP(SEND_MIDDLE):
+ bth2 = qp->s_psn++ & IPATH_PSN_MASK;
+ if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
+ qp->s_next_psn = qp->s_psn;
+ ss = &qp->s_sge;
+ len = qp->s_len;
+ if (len > pmtu) {
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_SEND)
+ qp->s_state = OP(SEND_LAST);
+ else {
+ qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ }
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ bth2 |= 1 << 31; /* Request ACK. */
+ qp->s_cur++;
+ if (qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case OP(RDMA_READ_RESPONSE_LAST):
+ /*
+ * This case can only happen if a RDMA write is restarted.
+ * See ipath_restart_rc().
+ */
+ ipath_init_restart(qp, wqe);
+ /* FALLTHROUGH */
+ case OP(RDMA_WRITE_FIRST):
+ qp->s_state = OP(RDMA_WRITE_MIDDLE);
+ /* FALLTHROUGH */
+ case OP(RDMA_WRITE_MIDDLE):
+ bth2 = qp->s_psn++ & IPATH_PSN_MASK;
+ if (ipath_cmp24(qp->s_psn, qp->s_next_psn) > 0)
+ qp->s_next_psn = qp->s_psn;
+ ss = &qp->s_sge;
+ len = qp->s_len;
+ if (len > pmtu) {
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
+ qp->s_state = OP(RDMA_WRITE_LAST);
+ else {
+ qp->s_state = OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ }
+ bth2 |= 1 << 31; /* Request ACK. */
+ qp->s_cur++;
+ if (qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case OP(RDMA_READ_RESPONSE_MIDDLE):
+ /*
+ * This case can only happen if a RDMA read is restarted.
+ * See ipath_restart_rc().
+ */
+ ipath_init_restart(qp, wqe);
+ len = ((qp->s_psn - wqe->psn) & IPATH_PSN_MASK) * pmtu;
+ ohdr->u.rc.reth.vaddr =
+ cpu_to_be64(wqe->wr.wr.rdma.remote_addr + len);
+ ohdr->u.rc.reth.rkey =
+ cpu_to_be32(wqe->wr.wr.rdma.rkey);
+ ohdr->u.rc.reth.length = cpu_to_be32(qp->s_len);
+ qp->s_state = OP(RDMA_READ_REQUEST);
+ hwords += sizeof(ohdr->u.rc.reth) / sizeof(u32);
+ bth2 = qp->s_psn & IPATH_PSN_MASK;
+ qp->s_psn = wqe->lpsn + 1;
+ ss = NULL;
+ len = 0;
+ qp->s_cur++;
+ if (qp->s_cur == qp->s_size)
+ qp->s_cur = 0;
+ break;
+ }
+ if (ipath_cmp24(qp->s_psn, qp->s_last_psn + IPATH_PSN_CREDIT - 1) >= 0)
+ bth2 |= 1 << 31; /* Request ACK. */
+ qp->s_len -= len;
+ qp->s_hdrwords = hwords;
+ qp->s_cur_sge = ss;
+ qp->s_cur_size = len;
+ ipath_make_ruc_header(dev, qp, ohdr, bth0 | (qp->s_state << 24), bth2);
+done:
+ ret = 1;
+ goto unlock;
+
+bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ return ret;
+}
+
+/**
+ * send_rc_ack - Construct an ACK packet and send it
+ * @qp: a pointer to the QP
+ *
+ * This is called from ipath_rc_rcv() and only uses the receive
+ * side QP state.
+ * Note that RDMA reads and atomics are handled in the
+ * send side QP state and tasklet.
+ */
+static void send_rc_ack(struct ipath_qp *qp)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_devdata *dd;
+ u16 lrh0;
+ u32 bth0;
+ u32 hwords;
+ u32 __iomem *piobuf;
+ struct ipath_ib_header hdr;
+ struct ipath_other_headers *ohdr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Don't send ACK or NAK if a RDMA read or atomic is pending. */
+ if (qp->r_head_ack_queue != qp->s_tail_ack_queue ||
+ (qp->s_flags & IPATH_S_ACK_PENDING) ||
+ qp->s_ack_state != OP(ACKNOWLEDGE))
+ goto queue_ack;
+
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Don't try to send ACKs if the link isn't ACTIVE */
+ dd = dev->dd;
+ if (!(dd->ipath_flags & IPATH_LINKACTIVE))
+ goto done;
+
+ piobuf = ipath_getpiobuf(dd, 0, NULL);
+ if (!piobuf) {
+ /*
+ * We are out of PIO buffers at the moment.
+ * Pass responsibility for sending the ACK to the
+ * send tasklet so that when a PIO buffer becomes
+ * available, the ACK is sent ahead of other outgoing
+ * packets.
+ */
+ spin_lock_irqsave(&qp->s_lock, flags);
+ goto queue_ack;
+ }
+
+ /* Construct the header. */
+ ohdr = &hdr.u.oth;
+ lrh0 = IPATH_LRH_BTH;
+ /* header size in 32-bit words LRH+BTH+AETH = (8+12+4)/4. */
+ hwords = 6;
+ if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
+ hwords += ipath_make_grh(dev, &hdr.u.l.grh,
+ &qp->remote_ah_attr.grh,
+ hwords, 0);
+ ohdr = &hdr.u.l.oth;
+ lrh0 = IPATH_LRH_GRH;
+ }
+ /* read pkey_index w/o lock (its atomic) */
+ bth0 = ipath_get_pkey(dd, qp->s_pkey_index) |
+ (OP(ACKNOWLEDGE) << 24) | (1 << 22);
+ if (qp->r_nak_state)
+ ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
+ (qp->r_nak_state <<
+ IPATH_AETH_CREDIT_SHIFT));
+ else
+ ohdr->u.aeth = ipath_compute_aeth(qp);
+ lrh0 |= qp->remote_ah_attr.sl << 4;
+ hdr.lrh[0] = cpu_to_be16(lrh0);
+ hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
+ hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC);
+ hdr.lrh[3] = cpu_to_be16(dd->ipath_lid |
+ qp->remote_ah_attr.src_path_bits);
+ ohdr->bth[0] = cpu_to_be32(bth0);
+ ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
+ ohdr->bth[2] = cpu_to_be32(qp->r_ack_psn & IPATH_PSN_MASK);
+
+ writeq(hwords + 1, piobuf);
+
+ if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
+ u32 *hdrp = (u32 *) &hdr;
+
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf + 2, hdrp, hwords - 1);
+ ipath_flush_wc();
+ __raw_writel(hdrp[hwords - 1], piobuf + hwords + 1);
+ } else
+ __iowrite32_copy(piobuf + 2, (u32 *) &hdr, hwords);
+
+ ipath_flush_wc();
+
+ dev->n_unicast_xmit++;
+ goto done;
+
+queue_ack:
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK) {
+ dev->n_rc_qacks++;
+ qp->s_flags |= IPATH_S_ACK_PENDING;
+ qp->s_nak_state = qp->r_nak_state;
+ qp->s_ack_psn = qp->r_ack_psn;
+
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
+ }
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+done:
+ return;
+}
+
+/**
+ * reset_psn - reset the QP state to send starting from PSN
+ * @qp: the QP
+ * @psn: the packet sequence number to restart at
+ *
+ * This is called from ipath_rc_rcv() to process an incoming RC ACK
+ * for the given QP.
+ * Called at interrupt level with the QP s_lock held.
+ */
+static void reset_psn(struct ipath_qp *qp, u32 psn)
+{
+ u32 n = qp->s_last;
+ struct ipath_swqe *wqe = get_swqe_ptr(qp, n);
+ u32 opcode;
+
+ qp->s_cur = n;
+
+ /*
+ * If we are starting the request from the beginning,
+ * let the normal send code handle initialization.
+ */
+ if (ipath_cmp24(psn, wqe->psn) <= 0) {
+ qp->s_state = OP(SEND_LAST);
+ goto done;
+ }
+
+ /* Find the work request opcode corresponding to the given PSN. */
+ opcode = wqe->wr.opcode;
+ for (;;) {
+ int diff;
+
+ if (++n == qp->s_size)
+ n = 0;
+ if (n == qp->s_tail)
+ break;
+ wqe = get_swqe_ptr(qp, n);
+ diff = ipath_cmp24(psn, wqe->psn);
+ if (diff < 0)
+ break;
+ qp->s_cur = n;
+ /*
+ * If we are starting the request from the beginning,
+ * let the normal send code handle initialization.
+ */
+ if (diff == 0) {
+ qp->s_state = OP(SEND_LAST);
+ goto done;
+ }
+ opcode = wqe->wr.opcode;
+ }
+
+ /*
+ * Set the state to restart in the middle of a request.
+ * Don't change the s_sge, s_cur_sge, or s_cur_size.
+ * See ipath_make_rc_req().
+ */
+ switch (opcode) {
+ case IB_WR_SEND:
+ case IB_WR_SEND_WITH_IMM:
+ qp->s_state = OP(RDMA_READ_RESPONSE_FIRST);
+ break;
+
+ case IB_WR_RDMA_WRITE:
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ qp->s_state = OP(RDMA_READ_RESPONSE_LAST);
+ break;
+
+ case IB_WR_RDMA_READ:
+ qp->s_state = OP(RDMA_READ_RESPONSE_MIDDLE);
+ break;
+
+ default:
+ /*
+ * This case shouldn't happen since its only
+ * one PSN per req.
+ */
+ qp->s_state = OP(SEND_LAST);
+ }
+done:
+ qp->s_psn = psn;
+}
+
+/**
+ * ipath_restart_rc - back up requester to resend the last un-ACKed request
+ * @qp: the QP to restart
+ * @psn: packet sequence number for the request
+ * @wc: the work completion request
+ *
+ * The QP s_lock should be held and interrupts disabled.
+ */
+void ipath_restart_rc(struct ipath_qp *qp, u32 psn)
+{
+ struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
+ struct ipath_ibdev *dev;
+
+ if (qp->s_retry == 0) {
+ ipath_send_complete(qp, wqe, IB_WC_RETRY_EXC_ERR);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
+ goto bail;
+ }
+ qp->s_retry--;
+
+ /*
+ * Remove the QP from the timeout queue.
+ * Note: it may already have been removed by ipath_ib_timer().
+ */
+ dev = to_idev(qp->ibqp.device);
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+
+ if (wqe->wr.opcode == IB_WR_RDMA_READ)
+ dev->n_rc_resends++;
+ else
+ dev->n_rc_resends += (qp->s_psn - psn) & IPATH_PSN_MASK;
+
+ reset_psn(qp, psn);
+ ipath_schedule_send(qp);
+
+bail:
+ return;
+}
+
+static inline void update_last_psn(struct ipath_qp *qp, u32 psn)
+{
+ qp->s_last_psn = psn;
+}
+
+/**
+ * do_rc_ack - process an incoming RC ACK
+ * @qp: the QP the ACK came in on
+ * @psn: the packet sequence number of the ACK
+ * @opcode: the opcode of the request that resulted in the ACK
+ *
+ * This is called from ipath_rc_rcv_resp() to process an incoming RC ACK
+ * for the given QP.
+ * Called at interrupt level with the QP s_lock held and interrupts disabled.
+ * Returns 1 if OK, 0 if current operation should be aborted (NAK).
+ */
+static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode,
+ u64 val)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ib_wc wc;
+ enum ib_wc_status status;
+ struct ipath_swqe *wqe;
+ int ret = 0;
+ u32 ack_psn;
+ int diff;
+
+ /*
+ * Remove the QP from the timeout queue (or RNR timeout queue).
+ * If ipath_ib_timer() has already removed it,
+ * it's OK since we hold the QP s_lock and ipath_restart_rc()
+ * just won't find anything to restart if we ACK everything.
+ */
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ spin_unlock(&dev->pending_lock);
+
+ /*
+ * Note that NAKs implicitly ACK outstanding SEND and RDMA write
+ * requests and implicitly NAK RDMA read and atomic requests issued
+ * before the NAK'ed request. The MSN won't include the NAK'ed
+ * request but will include an ACK'ed request(s).
+ */
+ ack_psn = psn;
+ if (aeth >> 29)
+ ack_psn--;
+ wqe = get_swqe_ptr(qp, qp->s_last);
+
+ /*
+ * The MSN might be for a later WQE than the PSN indicates so
+ * only complete WQEs that the PSN finishes.
+ */
+ while ((diff = ipath_cmp24(ack_psn, wqe->lpsn)) >= 0) {
+ /*
+ * RDMA_READ_RESPONSE_ONLY is a special case since
+ * we want to generate completion events for everything
+ * before the RDMA read, copy the data, then generate
+ * the completion for the read.
+ */
+ if (wqe->wr.opcode == IB_WR_RDMA_READ &&
+ opcode == OP(RDMA_READ_RESPONSE_ONLY) &&
+ diff == 0) {
+ ret = 1;
+ goto bail;
+ }
+ /*
+ * If this request is a RDMA read or atomic, and the ACK is
+ * for a later operation, this ACK NAKs the RDMA read or
+ * atomic. In other words, only a RDMA_READ_LAST or ONLY
+ * can ACK a RDMA read and likewise for atomic ops. Note
+ * that the NAK case can only happen if relaxed ordering is
+ * used and requests are sent after an RDMA read or atomic
+ * is sent but before the response is received.
+ */
+ if ((wqe->wr.opcode == IB_WR_RDMA_READ &&
+ (opcode != OP(RDMA_READ_RESPONSE_LAST) || diff != 0)) ||
+ ((wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
+ wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) &&
+ (opcode != OP(ATOMIC_ACKNOWLEDGE) || diff != 0))) {
+ /*
+ * The last valid PSN seen is the previous
+ * request's.
+ */
+ update_last_psn(qp, wqe->psn - 1);
+ /* Retry this request. */
+ ipath_restart_rc(qp, wqe->psn);
+ /*
+ * No need to process the ACK/NAK since we are
+ * restarting an earlier request.
+ */
+ goto bail;
+ }
+ if (wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
+ wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
+ *(u64 *) wqe->sg_list[0].vaddr = val;
+ if (qp->s_num_rd_atomic &&
+ (wqe->wr.opcode == IB_WR_RDMA_READ ||
+ wqe->wr.opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
+ wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)) {
+ qp->s_num_rd_atomic--;
+ /* Restart sending task if fence is complete */
+ if (((qp->s_flags & IPATH_S_FENCE_PENDING) &&
+ !qp->s_num_rd_atomic) ||
+ qp->s_flags & IPATH_S_RDMAR_PENDING)
+ ipath_schedule_send(qp);
+ }
+ /* Post a send completion queue entry if requested. */
+ if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
+ (wqe->wr.send_flags & IB_SEND_SIGNALED)) {
+ memset(&wc, 0, sizeof wc);
+ wc.wr_id = wqe->wr.wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc.byte_len = wqe->length;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = qp->remote_qpn;
+ wc.slid = qp->remote_ah_attr.dlid;
+ wc.sl = qp->remote_ah_attr.sl;
+ ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
+ }
+ qp->s_retry = qp->s_retry_cnt;
+ /*
+ * If we are completing a request which is in the process of
+ * being resent, we can stop resending it since we know the
+ * responder has already seen it.
+ */
+ if (qp->s_last == qp->s_cur) {
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ qp->s_last = qp->s_cur;
+ if (qp->s_last == qp->s_tail)
+ break;
+ wqe = get_swqe_ptr(qp, qp->s_cur);
+ qp->s_state = OP(SEND_LAST);
+ qp->s_psn = wqe->psn;
+ } else {
+ if (++qp->s_last >= qp->s_size)
+ qp->s_last = 0;
+ if (qp->state == IB_QPS_SQD && qp->s_last == qp->s_cur)
+ qp->s_draining = 0;
+ if (qp->s_last == qp->s_tail)
+ break;
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ }
+ }
+
+ switch (aeth >> 29) {
+ case 0: /* ACK */
+ dev->n_rc_acks++;
+ /* If this is a partial ACK, reset the retransmit timer. */
+ if (qp->s_last != qp->s_tail) {
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&qp->timerwait))
+ list_add_tail(&qp->timerwait,
+ &dev->pending[dev->pending_index]);
+ spin_unlock(&dev->pending_lock);
+ /*
+ * If we get a partial ACK for a resent operation,
+ * we can stop resending the earlier packets and
+ * continue with the next packet the receiver wants.
+ */
+ if (ipath_cmp24(qp->s_psn, psn) <= 0) {
+ reset_psn(qp, psn + 1);
+ ipath_schedule_send(qp);
+ }
+ } else if (ipath_cmp24(qp->s_psn, psn) <= 0) {
+ qp->s_state = OP(SEND_LAST);
+ qp->s_psn = psn + 1;
+ }
+ ipath_get_credit(qp, aeth);
+ qp->s_rnr_retry = qp->s_rnr_retry_cnt;
+ qp->s_retry = qp->s_retry_cnt;
+ update_last_psn(qp, psn);
+ ret = 1;
+ goto bail;
+
+ case 1: /* RNR NAK */
+ dev->n_rnr_naks++;
+ if (qp->s_last == qp->s_tail)
+ goto bail;
+ if (qp->s_rnr_retry == 0) {
+ status = IB_WC_RNR_RETRY_EXC_ERR;
+ goto class_b;
+ }
+ if (qp->s_rnr_retry_cnt < 7)
+ qp->s_rnr_retry--;
+
+ /* The last valid PSN is the previous PSN. */
+ update_last_psn(qp, psn - 1);
+
+ if (wqe->wr.opcode == IB_WR_RDMA_READ)
+ dev->n_rc_resends++;
+ else
+ dev->n_rc_resends +=
+ (qp->s_psn - psn) & IPATH_PSN_MASK;
+
+ reset_psn(qp, psn);
+
+ qp->s_rnr_timeout =
+ ib_ipath_rnr_table[(aeth >> IPATH_AETH_CREDIT_SHIFT) &
+ IPATH_AETH_CREDIT_MASK];
+ ipath_insert_rnr_queue(qp);
+ ipath_schedule_send(qp);
+ goto bail;
+
+ case 3: /* NAK */
+ if (qp->s_last == qp->s_tail)
+ goto bail;
+ /* The last valid PSN is the previous PSN. */
+ update_last_psn(qp, psn - 1);
+ switch ((aeth >> IPATH_AETH_CREDIT_SHIFT) &
+ IPATH_AETH_CREDIT_MASK) {
+ case 0: /* PSN sequence error */
+ dev->n_seq_naks++;
+ /*
+ * Back up to the responder's expected PSN.
+ * Note that we might get a NAK in the middle of an
+ * RDMA READ response which terminates the RDMA
+ * READ.
+ */
+ ipath_restart_rc(qp, psn);
+ break;
+
+ case 1: /* Invalid Request */
+ status = IB_WC_REM_INV_REQ_ERR;
+ dev->n_other_naks++;
+ goto class_b;
+
+ case 2: /* Remote Access Error */
+ status = IB_WC_REM_ACCESS_ERR;
+ dev->n_other_naks++;
+ goto class_b;
+
+ case 3: /* Remote Operation Error */
+ status = IB_WC_REM_OP_ERR;
+ dev->n_other_naks++;
+ class_b:
+ ipath_send_complete(qp, wqe, status);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
+ break;
+
+ default:
+ /* Ignore other reserved NAK error codes */
+ goto reserved;
+ }
+ qp->s_rnr_retry = qp->s_rnr_retry_cnt;
+ goto bail;
+
+ default: /* 2: reserved */
+ reserved:
+ /* Ignore reserved NAK codes. */
+ goto bail;
+ }
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_rc_rcv_resp - process an incoming RC response packet
+ * @dev: the device this packet came in on
+ * @ohdr: the other headers for this packet
+ * @data: the packet data
+ * @tlen: the packet length
+ * @qp: the QP for this packet
+ * @opcode: the opcode for this packet
+ * @psn: the packet sequence number for this packet
+ * @hdrsize: the header length
+ * @pmtu: the path MTU
+ * @header_in_data: true if part of the header data is in the data buffer
+ *
+ * This is called from ipath_rc_rcv() to process an incoming RC response
+ * packet for the given QP.
+ * Called at interrupt level.
+ */
+static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
+ struct ipath_other_headers *ohdr,
+ void *data, u32 tlen,
+ struct ipath_qp *qp,
+ u32 opcode,
+ u32 psn, u32 hdrsize, u32 pmtu,
+ int header_in_data)
+{
+ struct ipath_swqe *wqe;
+ enum ib_wc_status status;
+ unsigned long flags;
+ int diff;
+ u32 pad;
+ u32 aeth;
+ u64 val;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Double check we can process this now that we hold the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto ack_done;
+
+ /* Ignore invalid responses. */
+ if (ipath_cmp24(psn, qp->s_next_psn) >= 0)
+ goto ack_done;
+
+ /* Ignore duplicate responses. */
+ diff = ipath_cmp24(psn, qp->s_last_psn);
+ if (unlikely(diff <= 0)) {
+ /* Update credits for "ghost" ACKs */
+ if (diff == 0 && opcode == OP(ACKNOWLEDGE)) {
+ if (!header_in_data)
+ aeth = be32_to_cpu(ohdr->u.aeth);
+ else {
+ aeth = be32_to_cpu(((__be32 *) data)[0]);
+ data += sizeof(__be32);
+ }
+ if ((aeth >> 29) == 0)
+ ipath_get_credit(qp, aeth);
+ }
+ goto ack_done;
+ }
+
+ if (unlikely(qp->s_last == qp->s_tail))
+ goto ack_done;
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ status = IB_WC_SUCCESS;
+
+ switch (opcode) {
+ case OP(ACKNOWLEDGE):
+ case OP(ATOMIC_ACKNOWLEDGE):
+ case OP(RDMA_READ_RESPONSE_FIRST):
+ if (!header_in_data)
+ aeth = be32_to_cpu(ohdr->u.aeth);
+ else {
+ aeth = be32_to_cpu(((__be32 *) data)[0]);
+ data += sizeof(__be32);
+ }
+ if (opcode == OP(ATOMIC_ACKNOWLEDGE)) {
+ if (!header_in_data) {
+ __be32 *p = ohdr->u.at.atomic_ack_eth;
+
+ val = ((u64) be32_to_cpu(p[0]) << 32) |
+ be32_to_cpu(p[1]);
+ } else
+ val = be64_to_cpu(((__be64 *) data)[0]);
+ } else
+ val = 0;
+ if (!do_rc_ack(qp, aeth, psn, opcode, val) ||
+ opcode != OP(RDMA_READ_RESPONSE_FIRST))
+ goto ack_done;
+ hdrsize += 4;
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
+ goto ack_op_err;
+ qp->r_flags &= ~IPATH_R_RDMAR_SEQ;
+ /*
+ * If this is a response to a resent RDMA read, we
+ * have to be careful to copy the data to the right
+ * location.
+ */
+ qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
+ wqe, psn, pmtu);
+ goto read_middle;
+
+ case OP(RDMA_READ_RESPONSE_MIDDLE):
+ /* no AETH, no ACK */
+ if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
+ dev->n_rdma_seq++;
+ if (qp->r_flags & IPATH_R_RDMAR_SEQ)
+ goto ack_done;
+ qp->r_flags |= IPATH_R_RDMAR_SEQ;
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
+ goto ack_done;
+ }
+ if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
+ goto ack_op_err;
+ read_middle:
+ if (unlikely(tlen != (hdrsize + pmtu + 4)))
+ goto ack_len_err;
+ if (unlikely(pmtu >= qp->s_rdma_read_len))
+ goto ack_len_err;
+
+ /* We got a response so update the timeout. */
+ spin_lock(&dev->pending_lock);
+ if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
+ list_move_tail(&qp->timerwait,
+ &dev->pending[dev->pending_index]);
+ spin_unlock(&dev->pending_lock);
+
+ if (opcode == OP(RDMA_READ_RESPONSE_MIDDLE))
+ qp->s_retry = qp->s_retry_cnt;
+
+ /*
+ * Update the RDMA receive state but do the copy w/o
+ * holding the locks and blocking interrupts.
+ */
+ qp->s_rdma_read_len -= pmtu;
+ update_last_psn(qp, psn);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ipath_copy_sge(&qp->s_rdma_read_sge, data, pmtu);
+ goto bail;
+
+ case OP(RDMA_READ_RESPONSE_ONLY):
+ if (!header_in_data)
+ aeth = be32_to_cpu(ohdr->u.aeth);
+ else
+ aeth = be32_to_cpu(((__be32 *) data)[0]);
+ if (!do_rc_ack(qp, aeth, psn, opcode, 0))
+ goto ack_done;
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /*
+ * Check that the data size is >= 0 && <= pmtu.
+ * Remember to account for the AETH header (4) and
+ * ICRC (4).
+ */
+ if (unlikely(tlen < (hdrsize + pad + 8)))
+ goto ack_len_err;
+ /*
+ * If this is a response to a resent RDMA read, we
+ * have to be careful to copy the data to the right
+ * location.
+ */
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ qp->s_rdma_read_len = restart_sge(&qp->s_rdma_read_sge,
+ wqe, psn, pmtu);
+ goto read_last;
+
+ case OP(RDMA_READ_RESPONSE_LAST):
+ /* ACKs READ req. */
+ if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
+ dev->n_rdma_seq++;
+ if (qp->r_flags & IPATH_R_RDMAR_SEQ)
+ goto ack_done;
+ qp->r_flags |= IPATH_R_RDMAR_SEQ;
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
+ goto ack_done;
+ }
+ if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
+ goto ack_op_err;
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /*
+ * Check that the data size is >= 1 && <= pmtu.
+ * Remember to account for the AETH header (4) and
+ * ICRC (4).
+ */
+ if (unlikely(tlen <= (hdrsize + pad + 8)))
+ goto ack_len_err;
+ read_last:
+ tlen -= hdrsize + pad + 8;
+ if (unlikely(tlen != qp->s_rdma_read_len))
+ goto ack_len_err;
+ if (!header_in_data)
+ aeth = be32_to_cpu(ohdr->u.aeth);
+ else {
+ aeth = be32_to_cpu(((__be32 *) data)[0]);
+ data += sizeof(__be32);
+ }
+ ipath_copy_sge(&qp->s_rdma_read_sge, data, tlen);
+ (void) do_rc_ack(qp, aeth, psn,
+ OP(RDMA_READ_RESPONSE_LAST), 0);
+ goto ack_done;
+ }
+
+ack_op_err:
+ status = IB_WC_LOC_QP_OP_ERR;
+ goto ack_err;
+
+ack_len_err:
+ status = IB_WC_LOC_LEN_ERR;
+ack_err:
+ ipath_send_complete(qp, wqe, status);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
+ack_done:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+bail:
+ return;
+}
+
+/**
+ * ipath_rc_rcv_error - process an incoming duplicate or error RC packet
+ * @dev: the device this packet came in on
+ * @ohdr: the other headers for this packet
+ * @data: the packet data
+ * @qp: the QP for this packet
+ * @opcode: the opcode for this packet
+ * @psn: the packet sequence number for this packet
+ * @diff: the difference between the PSN and the expected PSN
+ * @header_in_data: true if part of the header data is in the data buffer
+ *
+ * This is called from ipath_rc_rcv() to process an unexpected
+ * incoming RC packet for the given QP.
+ * Called at interrupt level.
+ * Return 1 if no more processing is needed; otherwise return 0 to
+ * schedule a response to be sent.
+ */
+static inline int ipath_rc_rcv_error(struct ipath_ibdev *dev,
+ struct ipath_other_headers *ohdr,
+ void *data,
+ struct ipath_qp *qp,
+ u32 opcode,
+ u32 psn,
+ int diff,
+ int header_in_data)
+{
+ struct ipath_ack_entry *e;
+ u8 i, prev;
+ int old_req;
+ unsigned long flags;
+
+ if (diff > 0) {
+ /*
+ * Packet sequence error.
+ * A NAK will ACK earlier sends and RDMA writes.
+ * Don't queue the NAK if we already sent one.
+ */
+ if (!qp->r_nak_state) {
+ qp->r_nak_state = IB_NAK_PSN_ERROR;
+ /* Use the expected PSN. */
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
+ }
+ goto done;
+ }
+
+ /*
+ * Handle a duplicate request. Don't re-execute SEND, RDMA
+ * write or atomic op. Don't NAK errors, just silently drop
+ * the duplicate request. Note that r_sge, r_len, and
+ * r_rcv_len may be in use so don't modify them.
+ *
+ * We are supposed to ACK the earliest duplicate PSN but we
+ * can coalesce an outstanding duplicate ACK. We have to
+ * send the earliest so that RDMA reads can be restarted at
+ * the requester's expected PSN.
+ *
+ * First, find where this duplicate PSN falls within the
+ * ACKs previously sent.
+ */
+ psn &= IPATH_PSN_MASK;
+ e = NULL;
+ old_req = 1;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this now that we hold the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock_done;
+
+ for (i = qp->r_head_ack_queue; ; i = prev) {
+ if (i == qp->s_tail_ack_queue)
+ old_req = 0;
+ if (i)
+ prev = i - 1;
+ else
+ prev = IPATH_MAX_RDMA_ATOMIC;
+ if (prev == qp->r_head_ack_queue) {
+ e = NULL;
+ break;
+ }
+ e = &qp->s_ack_queue[prev];
+ if (!e->opcode) {
+ e = NULL;
+ break;
+ }
+ if (ipath_cmp24(psn, e->psn) >= 0) {
+ if (prev == qp->s_tail_ack_queue)
+ old_req = 0;
+ break;
+ }
+ }
+ switch (opcode) {
+ case OP(RDMA_READ_REQUEST): {
+ struct ib_reth *reth;
+ u32 offset;
+ u32 len;
+
+ /*
+ * If we didn't find the RDMA read request in the ack queue,
+ * or the send tasklet is already backed up to send an
+ * earlier entry, we can ignore this request.
+ */
+ if (!e || e->opcode != OP(RDMA_READ_REQUEST) || old_req)
+ goto unlock_done;
+ /* RETH comes after BTH */
+ if (!header_in_data)
+ reth = &ohdr->u.rc.reth;
+ else {
+ reth = (struct ib_reth *)data;
+ data += sizeof(*reth);
+ }
+ /*
+ * Address range must be a subset of the original
+ * request and start on pmtu boundaries.
+ * We reuse the old ack_queue slot since the requester
+ * should not back up and request an earlier PSN for the
+ * same request.
+ */
+ offset = ((psn - e->psn) & IPATH_PSN_MASK) *
+ ib_mtu_enum_to_int(qp->path_mtu);
+ len = be32_to_cpu(reth->length);
+ if (unlikely(offset + len > e->rdma_sge.sge.sge_length))
+ goto unlock_done;
+ if (len != 0) {
+ u32 rkey = be32_to_cpu(reth->rkey);
+ u64 vaddr = be64_to_cpu(reth->vaddr);
+ int ok;
+
+ ok = ipath_rkey_ok(qp, &e->rdma_sge,
+ len, vaddr, rkey,
+ IB_ACCESS_REMOTE_READ);
+ if (unlikely(!ok))
+ goto unlock_done;
+ } else {
+ e->rdma_sge.sg_list = NULL;
+ e->rdma_sge.num_sge = 0;
+ e->rdma_sge.sge.mr = NULL;
+ e->rdma_sge.sge.vaddr = NULL;
+ e->rdma_sge.sge.length = 0;
+ e->rdma_sge.sge.sge_length = 0;
+ }
+ e->psn = psn;
+ qp->s_ack_state = OP(ACKNOWLEDGE);
+ qp->s_tail_ack_queue = prev;
+ break;
+ }
+
+ case OP(COMPARE_SWAP):
+ case OP(FETCH_ADD): {
+ /*
+ * If we didn't find the atomic request in the ack queue
+ * or the send tasklet is already backed up to send an
+ * earlier entry, we can ignore this request.
+ */
+ if (!e || e->opcode != (u8) opcode || old_req)
+ goto unlock_done;
+ qp->s_ack_state = OP(ACKNOWLEDGE);
+ qp->s_tail_ack_queue = prev;
+ break;
+ }
+
+ default:
+ if (old_req)
+ goto unlock_done;
+ /*
+ * Resend the most recent ACK if this request is
+ * after all the previous RDMA reads and atomics.
+ */
+ if (i == qp->r_head_ack_queue) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ qp->r_nak_state = 0;
+ qp->r_ack_psn = qp->r_psn - 1;
+ goto send_ack;
+ }
+ /*
+ * Try to send a simple ACK to work around a Mellanox bug
+ * which doesn't accept a RDMA read response or atomic
+ * response as an ACK for earlier SENDs or RDMA writes.
+ */
+ if (qp->r_head_ack_queue == qp->s_tail_ack_queue &&
+ !(qp->s_flags & IPATH_S_ACK_PENDING) &&
+ qp->s_ack_state == OP(ACKNOWLEDGE)) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ qp->r_nak_state = 0;
+ qp->r_ack_psn = qp->s_ack_queue[i].psn - 1;
+ goto send_ack;
+ }
+ /*
+ * Resend the RDMA read or atomic op which
+ * ACKs this duplicate request.
+ */
+ qp->s_ack_state = OP(ACKNOWLEDGE);
+ qp->s_tail_ack_queue = i;
+ break;
+ }
+ qp->r_nak_state = 0;
+ ipath_schedule_send(qp);
+
+unlock_done:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+done:
+ return 1;
+
+send_ack:
+ return 0;
+}
+
+void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err)
+{
+ unsigned long flags;
+ int lastwqe;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ lastwqe = ipath_error_qp(qp, err);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ if (lastwqe) {
+ struct ib_event ev;
+
+ ev.device = qp->ibqp.device;
+ ev.element.qp = &qp->ibqp;
+ ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
+ qp->ibqp.event_handler(&ev, qp->ibqp.qp_context);
+ }
+}
+
+static inline void ipath_update_ack_queue(struct ipath_qp *qp, unsigned n)
+{
+ unsigned next;
+
+ next = n + 1;
+ if (next > IPATH_MAX_RDMA_ATOMIC)
+ next = 0;
+ if (n == qp->s_tail_ack_queue) {
+ qp->s_tail_ack_queue = next;
+ qp->s_ack_state = OP(ACKNOWLEDGE);
+ }
+}
+
+/**
+ * ipath_rc_rcv - process an incoming RC packet
+ * @dev: the device this packet came in on
+ * @hdr: the header of this packet
+ * @has_grh: true if the header has a GRH
+ * @data: the packet data
+ * @tlen: the packet length
+ * @qp: the QP for this packet
+ *
+ * This is called from ipath_qp_rcv() to process an incoming RC packet
+ * for the given QP.
+ * Called at interrupt level.
+ */
+void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
+{
+ struct ipath_other_headers *ohdr;
+ u32 opcode;
+ u32 hdrsize;
+ u32 psn;
+ u32 pad;
+ struct ib_wc wc;
+ u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ int diff;
+ struct ib_reth *reth;
+ int header_in_data;
+ unsigned long flags;
+
+ /* Validate the SLID. See Ch. 9.6.1.5 */
+ if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
+ goto done;
+
+ /* Check for GRH */
+ if (!has_grh) {
+ ohdr = &hdr->u.oth;
+ hdrsize = 8 + 12; /* LRH + BTH */
+ psn = be32_to_cpu(ohdr->bth[2]);
+ header_in_data = 0;
+ } else {
+ ohdr = &hdr->u.l.oth;
+ hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
+ /*
+ * The header with GRH is 60 bytes and the core driver sets
+ * the eager header buffer size to 56 bytes so the last 4
+ * bytes of the BTH header (PSN) is in the data buffer.
+ */
+ header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
+ if (header_in_data) {
+ psn = be32_to_cpu(((__be32 *) data)[0]);
+ data += sizeof(__be32);
+ } else
+ psn = be32_to_cpu(ohdr->bth[2]);
+ }
+
+ /*
+ * Process responses (ACKs) before anything else. Note that the
+ * packet sequence number will be for something in the send work
+ * queue rather than the expected receive packet sequence number.
+ * In other words, this QP is the requester.
+ */
+ opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ if (opcode >= OP(RDMA_READ_RESPONSE_FIRST) &&
+ opcode <= OP(ATOMIC_ACKNOWLEDGE)) {
+ ipath_rc_rcv_resp(dev, ohdr, data, tlen, qp, opcode, psn,
+ hdrsize, pmtu, header_in_data);
+ goto done;
+ }
+
+ /* Compute 24 bits worth of difference. */
+ diff = ipath_cmp24(psn, qp->r_psn);
+ if (unlikely(diff)) {
+ if (ipath_rc_rcv_error(dev, ohdr, data, qp, opcode,
+ psn, diff, header_in_data))
+ goto done;
+ goto send_ack;
+ }
+
+ /* Check for opcode sequence errors. */
+ switch (qp->r_state) {
+ case OP(SEND_FIRST):
+ case OP(SEND_MIDDLE):
+ if (opcode == OP(SEND_MIDDLE) ||
+ opcode == OP(SEND_LAST) ||
+ opcode == OP(SEND_LAST_WITH_IMMEDIATE))
+ break;
+ goto nack_inv;
+
+ case OP(RDMA_WRITE_FIRST):
+ case OP(RDMA_WRITE_MIDDLE):
+ if (opcode == OP(RDMA_WRITE_MIDDLE) ||
+ opcode == OP(RDMA_WRITE_LAST) ||
+ opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
+ break;
+ goto nack_inv;
+
+ default:
+ if (opcode == OP(SEND_MIDDLE) ||
+ opcode == OP(SEND_LAST) ||
+ opcode == OP(SEND_LAST_WITH_IMMEDIATE) ||
+ opcode == OP(RDMA_WRITE_MIDDLE) ||
+ opcode == OP(RDMA_WRITE_LAST) ||
+ opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
+ goto nack_inv;
+ /*
+ * Note that it is up to the requester to not send a new
+ * RDMA read or atomic operation before receiving an ACK
+ * for the previous operation.
+ */
+ break;
+ }
+
+ memset(&wc, 0, sizeof wc);
+
+ /* OK, process the packet. */
+ switch (opcode) {
+ case OP(SEND_FIRST):
+ if (!ipath_get_rwqe(qp, 0))
+ goto rnr_nak;
+ qp->r_rcv_len = 0;
+ /* FALLTHROUGH */
+ case OP(SEND_MIDDLE):
+ case OP(RDMA_WRITE_MIDDLE):
+ send_middle:
+ /* Check for invalid length PMTU or posted rwqe len. */
+ if (unlikely(tlen != (hdrsize + pmtu + 4)))
+ goto nack_inv;
+ qp->r_rcv_len += pmtu;
+ if (unlikely(qp->r_rcv_len > qp->r_len))
+ goto nack_inv;
+ ipath_copy_sge(&qp->r_sge, data, pmtu);
+ break;
+
+ case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
+ /* consume RWQE */
+ if (!ipath_get_rwqe(qp, 1))
+ goto rnr_nak;
+ goto send_last_imm;
+
+ case OP(SEND_ONLY):
+ case OP(SEND_ONLY_WITH_IMMEDIATE):
+ if (!ipath_get_rwqe(qp, 0))
+ goto rnr_nak;
+ qp->r_rcv_len = 0;
+ if (opcode == OP(SEND_ONLY))
+ goto send_last;
+ /* FALLTHROUGH */
+ case OP(SEND_LAST_WITH_IMMEDIATE):
+ send_last_imm:
+ if (header_in_data) {
+ wc.ex.imm_data = *(__be32 *) data;
+ data += sizeof(__be32);
+ } else {
+ /* Immediate data comes after BTH */
+ wc.ex.imm_data = ohdr->u.imm_data;
+ }
+ hdrsize += 4;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ /* FALLTHROUGH */
+ case OP(SEND_LAST):
+ case OP(RDMA_WRITE_LAST):
+ send_last:
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /* Check for invalid length. */
+ /* XXX LAST len should be >= 1 */
+ if (unlikely(tlen < (hdrsize + pad + 4)))
+ goto nack_inv;
+ /* Don't count the CRC. */
+ tlen -= (hdrsize + pad + 4);
+ wc.byte_len = tlen + qp->r_rcv_len;
+ if (unlikely(wc.byte_len > qp->r_len))
+ goto nack_inv;
+ ipath_copy_sge(&qp->r_sge, data, tlen);
+ qp->r_msn++;
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
+ break;
+ wc.wr_id = qp->r_wr_id;
+ wc.status = IB_WC_SUCCESS;
+ if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) ||
+ opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ else
+ wc.opcode = IB_WC_RECV;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = qp->remote_qpn;
+ wc.slid = qp->remote_ah_attr.dlid;
+ wc.sl = qp->remote_ah_attr.sl;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
+ (ohdr->bth[0] &
+ cpu_to_be32(1 << 23)) != 0);
+ break;
+
+ case OP(RDMA_WRITE_FIRST):
+ case OP(RDMA_WRITE_ONLY):
+ case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_WRITE)))
+ goto nack_inv;
+ /* consume RWQE */
+ /* RETH comes after BTH */
+ if (!header_in_data)
+ reth = &ohdr->u.rc.reth;
+ else {
+ reth = (struct ib_reth *)data;
+ data += sizeof(*reth);
+ }
+ hdrsize += sizeof(*reth);
+ qp->r_len = be32_to_cpu(reth->length);
+ qp->r_rcv_len = 0;
+ if (qp->r_len != 0) {
+ u32 rkey = be32_to_cpu(reth->rkey);
+ u64 vaddr = be64_to_cpu(reth->vaddr);
+ int ok;
+
+ /* Check rkey & NAK */
+ ok = ipath_rkey_ok(qp, &qp->r_sge,
+ qp->r_len, vaddr, rkey,
+ IB_ACCESS_REMOTE_WRITE);
+ if (unlikely(!ok))
+ goto nack_acc;
+ } else {
+ qp->r_sge.sg_list = NULL;
+ qp->r_sge.sge.mr = NULL;
+ qp->r_sge.sge.vaddr = NULL;
+ qp->r_sge.sge.length = 0;
+ qp->r_sge.sge.sge_length = 0;
+ }
+ if (opcode == OP(RDMA_WRITE_FIRST))
+ goto send_middle;
+ else if (opcode == OP(RDMA_WRITE_ONLY))
+ goto send_last;
+ if (!ipath_get_rwqe(qp, 1))
+ goto rnr_nak;
+ goto send_last_imm;
+
+ case OP(RDMA_READ_REQUEST): {
+ struct ipath_ack_entry *e;
+ u32 len;
+ u8 next;
+
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_READ)))
+ goto nack_inv;
+ next = qp->r_head_ack_queue + 1;
+ if (next > IPATH_MAX_RDMA_ATOMIC)
+ next = 0;
+ spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this while holding the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock;
+ if (unlikely(next == qp->s_tail_ack_queue)) {
+ if (!qp->s_ack_queue[next].sent)
+ goto nack_inv_unlck;
+ ipath_update_ack_queue(qp, next);
+ }
+ e = &qp->s_ack_queue[qp->r_head_ack_queue];
+ /* RETH comes after BTH */
+ if (!header_in_data)
+ reth = &ohdr->u.rc.reth;
+ else {
+ reth = (struct ib_reth *)data;
+ data += sizeof(*reth);
+ }
+ len = be32_to_cpu(reth->length);
+ if (len) {
+ u32 rkey = be32_to_cpu(reth->rkey);
+ u64 vaddr = be64_to_cpu(reth->vaddr);
+ int ok;
+
+ /* Check rkey & NAK */
+ ok = ipath_rkey_ok(qp, &e->rdma_sge, len, vaddr,
+ rkey, IB_ACCESS_REMOTE_READ);
+ if (unlikely(!ok))
+ goto nack_acc_unlck;
+ /*
+ * Update the next expected PSN. We add 1 later
+ * below, so only add the remainder here.
+ */
+ if (len > pmtu)
+ qp->r_psn += (len - 1) / pmtu;
+ } else {
+ e->rdma_sge.sg_list = NULL;
+ e->rdma_sge.num_sge = 0;
+ e->rdma_sge.sge.mr = NULL;
+ e->rdma_sge.sge.vaddr = NULL;
+ e->rdma_sge.sge.length = 0;
+ e->rdma_sge.sge.sge_length = 0;
+ }
+ e->opcode = opcode;
+ e->sent = 0;
+ e->psn = psn;
+ /*
+ * We need to increment the MSN here instead of when we
+ * finish sending the result since a duplicate request would
+ * increment it more than once.
+ */
+ qp->r_msn++;
+ qp->r_psn++;
+ qp->r_state = opcode;
+ qp->r_nak_state = 0;
+ qp->r_head_ack_queue = next;
+
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
+
+ goto unlock;
+ }
+
+ case OP(COMPARE_SWAP):
+ case OP(FETCH_ADD): {
+ struct ib_atomic_eth *ateth;
+ struct ipath_ack_entry *e;
+ u64 vaddr;
+ atomic64_t *maddr;
+ u64 sdata;
+ u32 rkey;
+ u8 next;
+
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_ATOMIC)))
+ goto nack_inv;
+ next = qp->r_head_ack_queue + 1;
+ if (next > IPATH_MAX_RDMA_ATOMIC)
+ next = 0;
+ spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this while holding the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock;
+ if (unlikely(next == qp->s_tail_ack_queue)) {
+ if (!qp->s_ack_queue[next].sent)
+ goto nack_inv_unlck;
+ ipath_update_ack_queue(qp, next);
+ }
+ if (!header_in_data)
+ ateth = &ohdr->u.atomic_eth;
+ else
+ ateth = (struct ib_atomic_eth *)data;
+ vaddr = ((u64) be32_to_cpu(ateth->vaddr[0]) << 32) |
+ be32_to_cpu(ateth->vaddr[1]);
+ if (unlikely(vaddr & (sizeof(u64) - 1)))
+ goto nack_inv_unlck;
+ rkey = be32_to_cpu(ateth->rkey);
+ /* Check rkey & NAK */
+ if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge,
+ sizeof(u64), vaddr, rkey,
+ IB_ACCESS_REMOTE_ATOMIC)))
+ goto nack_acc_unlck;
+ /* Perform atomic OP and save result. */
+ maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
+ sdata = be64_to_cpu(ateth->swap_data);
+ e = &qp->s_ack_queue[qp->r_head_ack_queue];
+ e->atomic_data = (opcode == OP(FETCH_ADD)) ?
+ (u64) atomic64_add_return(sdata, maddr) - sdata :
+ (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
+ be64_to_cpu(ateth->compare_data),
+ sdata);
+ e->opcode = opcode;
+ e->sent = 0;
+ e->psn = psn & IPATH_PSN_MASK;
+ qp->r_msn++;
+ qp->r_psn++;
+ qp->r_state = opcode;
+ qp->r_nak_state = 0;
+ qp->r_head_ack_queue = next;
+
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
+
+ goto unlock;
+ }
+
+ default:
+ /* NAK unknown opcodes. */
+ goto nack_inv;
+ }
+ qp->r_psn++;
+ qp->r_state = opcode;
+ qp->r_ack_psn = psn;
+ qp->r_nak_state = 0;
+ /* Send an ACK if requested or required. */
+ if (psn & (1 << 31))
+ goto send_ack;
+ goto done;
+
+rnr_nak:
+ qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
+
+nack_inv_unlck:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+nack_inv:
+ ipath_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
+ qp->r_nak_state = IB_NAK_INVALID_REQUEST;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
+
+nack_acc_unlck:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+nack_acc:
+ ipath_rc_error(qp, IB_WC_LOC_PROT_ERR);
+ qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR;
+ qp->r_ack_psn = qp->r_psn;
+send_ack:
+ send_rc_ack(qp);
+ goto done;
+
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+done:
+ return;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _IPATH_REGISTERS_H
+#define _IPATH_REGISTERS_H
+
+/*
+ * This file should only be included by kernel source, and by the diags. It
+ * defines the registers, and their contents, for InfiniPath chips.
+ */
+
+/*
+ * These are the InfiniPath register and buffer bit definitions,
+ * that are visible to software, and needed only by the kernel
+ * and diag code. A few, that are visible to protocol and user
+ * code are in ipath_common.h. Some bits are specific
+ * to a given chip implementation, and have been moved to the
+ * chip-specific source file
+ */
+
+/* kr_revision bits */
+#define INFINIPATH_R_CHIPREVMINOR_MASK 0xFF
+#define INFINIPATH_R_CHIPREVMINOR_SHIFT 0
+#define INFINIPATH_R_CHIPREVMAJOR_MASK 0xFF
+#define INFINIPATH_R_CHIPREVMAJOR_SHIFT 8
+#define INFINIPATH_R_ARCH_MASK 0xFF
+#define INFINIPATH_R_ARCH_SHIFT 16
+#define INFINIPATH_R_SOFTWARE_MASK 0xFF
+#define INFINIPATH_R_SOFTWARE_SHIFT 24
+#define INFINIPATH_R_BOARDID_MASK 0xFF
+#define INFINIPATH_R_BOARDID_SHIFT 32
+
+/* kr_control bits */
+#define INFINIPATH_C_FREEZEMODE 0x00000002
+#define INFINIPATH_C_LINKENABLE 0x00000004
+
+/* kr_sendctrl bits */
+#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
+#define INFINIPATH_S_UPDTHRESH_SHIFT 24
+#define INFINIPATH_S_UPDTHRESH_MASK 0x1f
+
+#define IPATH_S_ABORT 0
+#define IPATH_S_PIOINTBUFAVAIL 1
+#define IPATH_S_PIOBUFAVAILUPD 2
+#define IPATH_S_PIOENABLE 3
+#define IPATH_S_SDMAINTENABLE 9
+#define IPATH_S_SDMASINGLEDESCRIPTOR 10
+#define IPATH_S_SDMAENABLE 11
+#define IPATH_S_SDMAHALT 12
+#define IPATH_S_DISARM 31
+
+#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
+#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
+#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
+#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
+#define INFINIPATH_S_SDMAINTENABLE (1U << IPATH_S_SDMAINTENABLE)
+#define INFINIPATH_S_SDMASINGLEDESCRIPTOR \
+ (1U << IPATH_S_SDMASINGLEDESCRIPTOR)
+#define INFINIPATH_S_SDMAENABLE (1U << IPATH_S_SDMAENABLE)
+#define INFINIPATH_S_SDMAHALT (1U << IPATH_S_SDMAHALT)
+#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
+
+/* kr_rcvctrl bits that are the same on multiple chips */
+#define INFINIPATH_R_PORTENABLE_SHIFT 0
+#define INFINIPATH_R_QPMAP_ENABLE (1ULL << 38)
+
+/* kr_intstatus, kr_intclear, kr_intmask bits */
+#define INFINIPATH_I_SDMAINT 0x8000000000000000ULL
+#define INFINIPATH_I_SDMADISABLED 0x4000000000000000ULL
+#define INFINIPATH_I_ERROR 0x0000000080000000ULL
+#define INFINIPATH_I_SPIOSENT 0x0000000040000000ULL
+#define INFINIPATH_I_SPIOBUFAVAIL 0x0000000020000000ULL
+#define INFINIPATH_I_GPIO 0x0000000010000000ULL
+#define INFINIPATH_I_JINT 0x0000000004000000ULL
+
+/* kr_errorstatus, kr_errorclear, kr_errormask bits */
+#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
+#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
+#define INFINIPATH_E_RICRC 0x0000000000000004ULL
+#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
+#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
+#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
+#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
+#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
+#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
+#define INFINIPATH_E_REBP 0x0000000000000200ULL
+#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
+#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
+#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
+#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
+#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
+#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
+#define INFINIPATH_E_RHDR 0x0000000000010000ULL
+#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
+#define INFINIPATH_E_SENDSPECIALTRIGGER 0x0000000008000000ULL
+#define INFINIPATH_E_SDMADISABLED 0x0000000010000000ULL
+#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
+#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
+#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
+#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
+#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
+#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
+#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
+#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
+#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
+#define INFINIPATH_E_SENDBUFMISUSE 0x0000004000000000ULL
+#define INFINIPATH_E_SDMAGENMISMATCH 0x0000008000000000ULL
+#define INFINIPATH_E_SDMAOUTOFBOUND 0x0000010000000000ULL
+#define INFINIPATH_E_SDMATAILOUTOFBOUND 0x0000020000000000ULL
+#define INFINIPATH_E_SDMABASE 0x0000040000000000ULL
+#define INFINIPATH_E_SDMA1STDESC 0x0000080000000000ULL
+#define INFINIPATH_E_SDMARPYTAG 0x0000100000000000ULL
+#define INFINIPATH_E_SDMADWEN 0x0000200000000000ULL
+#define INFINIPATH_E_SDMAMISSINGDW 0x0000400000000000ULL
+#define INFINIPATH_E_SDMAUNEXPDATA 0x0000800000000000ULL
+#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
+#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
+#define INFINIPATH_E_RESET 0x0004000000000000ULL
+#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
+#define INFINIPATH_E_SDMADESCADDRMISALIGN 0x0010000000000000ULL
+#define INFINIPATH_E_INVALIDEEPCMD 0x0020000000000000ULL
+
+/*
+ * this is used to print "common" packet errors only when the
+ * __IPATH_ERRPKTDBG bit is set in ipath_debug.
+ */
+#define INFINIPATH_E_PKTERRS ( INFINIPATH_E_SPKTLEN \
+ | INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_RVCRC \
+ | INFINIPATH_E_RICRC | INFINIPATH_E_RSHORTPKTLEN \
+ | INFINIPATH_E_REBP )
+
+/* Convenience for decoding Send DMA errors */
+#define INFINIPATH_E_SDMAERRS ( \
+ INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND | \
+ INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE | \
+ INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG | \
+ INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW | \
+ INFINIPATH_E_SDMAUNEXPDATA | \
+ INFINIPATH_E_SDMADESCADDRMISALIGN | \
+ INFINIPATH_E_SDMADISABLED | \
+ INFINIPATH_E_SENDBUFMISUSE)
+
+/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
+/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
+ * RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: expTID, 3: eagerTID
+ * bit 4: flag buffer, 5: datainfo, 6: header info */
+#define INFINIPATH_HWE_TXEMEMPARITYERR_MASK 0xFULL
+#define INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT 40
+#define INFINIPATH_HWE_RXEMEMPARITYERR_MASK 0x7FULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT 44
+#define INFINIPATH_HWE_IBCBUSTOSPCPARITYERR 0x4000000000000000ULL
+#define INFINIPATH_HWE_IBCBUSFRSPCPARITYERR 0x8000000000000000ULL
+/* txe mem parity errors (shift by INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) */
+#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF 0x1ULL
+#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC 0x2ULL
+#define INFINIPATH_HWE_TXEMEMPARITYERR_PIOLAUNCHFIFO 0x4ULL
+/* rxe mem parity errors (shift by INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) */
+#define INFINIPATH_HWE_RXEMEMPARITYERR_RCVBUF 0x01ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_LOOKUPQ 0x02ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_EXPTID 0x04ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID 0x08ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_FLAGBUF 0x10ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_DATAINFO 0x20ULL
+#define INFINIPATH_HWE_RXEMEMPARITYERR_HDRINFO 0x40ULL
+/* waldo specific -- find the rest in ipath_6110.c */
+#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
+/* 6120/7220 specific -- find the rest in ipath_6120.c and ipath_7220.c */
+#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
+
+/* kr_hwdiagctrl bits */
+#define INFINIPATH_DC_FORCETXEMEMPARITYERR_MASK 0xFULL
+#define INFINIPATH_DC_FORCETXEMEMPARITYERR_SHIFT 40
+#define INFINIPATH_DC_FORCERXEMEMPARITYERR_MASK 0x7FULL
+#define INFINIPATH_DC_FORCERXEMEMPARITYERR_SHIFT 44
+#define INFINIPATH_DC_FORCERXDSYNCMEMPARITYERR 0x0000000400000000ULL
+#define INFINIPATH_DC_COUNTERDISABLE 0x1000000000000000ULL
+#define INFINIPATH_DC_COUNTERWREN 0x2000000000000000ULL
+#define INFINIPATH_DC_FORCEIBCBUSTOSPCPARITYERR 0x4000000000000000ULL
+#define INFINIPATH_DC_FORCEIBCBUSFRSPCPARITYERR 0x8000000000000000ULL
+
+/* kr_ibcctrl bits */
+#define INFINIPATH_IBCC_FLOWCTRLPERIOD_MASK 0xFFULL
+#define INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT 0
+#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_MASK 0xFFULL
+#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
+#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
+#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
+#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
+#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
+#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
+#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
+#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
+#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
+#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
+#define INFINIPATH_IBCC_MAXPKTLEN_SHIFT 20
+#define INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK 0xFULL
+#define INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT 32
+#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_MASK 0xFULL
+#define INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT 36
+#define INFINIPATH_IBCC_CREDITSCALE_MASK 0x7ULL
+#define INFINIPATH_IBCC_CREDITSCALE_SHIFT 40
+#define INFINIPATH_IBCC_LOOPBACK 0x8000000000000000ULL
+#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
+
+/* kr_ibcstatus bits */
+#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
+#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
+
+#define INFINIPATH_IBCS_TXREADY 0x40000000
+#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
+/* link training states (shift by
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
+#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
+#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
+#define INFINIPATH_IBCS_LT_STATE_POLLQUIET 0x03
+#define INFINIPATH_IBCS_LT_STATE_SLEEPDELAY 0x04
+#define INFINIPATH_IBCS_LT_STATE_SLEEPQUIET 0x05
+#define INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE 0x08
+#define INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG 0x09
+#define INFINIPATH_IBCS_LT_STATE_CFGWAITRMT 0x0a
+#define INFINIPATH_IBCS_LT_STATE_CFGIDLE 0x0b
+#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
+#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
+#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
+/* link state machine states (shift by ibcs_ls_shift) */
+#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
+#define INFINIPATH_IBCS_L_STATE_INIT 0x1
+#define INFINIPATH_IBCS_L_STATE_ARM 0x2
+#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
+#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
+
+
+/* kr_extstatus bits */
+#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
+#define INFINIPATH_EXTS_GPIOIN_MASK 0xFFFFULL
+#define INFINIPATH_EXTS_GPIOIN_SHIFT 48
+
+/* kr_extctrl bits */
+#define INFINIPATH_EXTC_GPIOINVERT_MASK 0xFFFFULL
+#define INFINIPATH_EXTC_GPIOINVERT_SHIFT 32
+#define INFINIPATH_EXTC_GPIOOE_MASK 0xFFFFULL
+#define INFINIPATH_EXTC_GPIOOE_SHIFT 48
+#define INFINIPATH_EXTC_SERDESENABLE 0x80000000ULL
+#define INFINIPATH_EXTC_SERDESCONNECT 0x40000000ULL
+#define INFINIPATH_EXTC_SERDESENTRUNKING 0x20000000ULL
+#define INFINIPATH_EXTC_SERDESDISRXFIFO 0x10000000ULL
+#define INFINIPATH_EXTC_SERDESENPLPBK1 0x08000000ULL
+#define INFINIPATH_EXTC_SERDESENPLPBK2 0x04000000ULL
+#define INFINIPATH_EXTC_SERDESENENCDEC 0x02000000ULL
+#define INFINIPATH_EXTC_LED1SECPORT_ON 0x00000020ULL
+#define INFINIPATH_EXTC_LED2SECPORT_ON 0x00000010ULL
+#define INFINIPATH_EXTC_LED1PRIPORT_ON 0x00000008ULL
+#define INFINIPATH_EXTC_LED2PRIPORT_ON 0x00000004ULL
+#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
+#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
+
+/* kr_partitionkey bits */
+#define INFINIPATH_PKEY_SIZE 16
+#define INFINIPATH_PKEY_MASK 0xFFFF
+#define INFINIPATH_PKEY_DEFAULT_PKEY 0xFFFF
+
+/* kr_serdesconfig0 bits */
+#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
+#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
+
+/* common kr_xgxsconfig bits (or safe in all, even if not implemented) */
+#define INFINIPATH_XGXS_RX_POL_SHIFT 19
+#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL
+
+
+/*
+ * IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
+ * PIO send buffers. This is well beyond anything currently
+ * defined in the InfiniBand spec.
+ */
+#define IPATH_PIO_MAXIBHDR 128
+
+typedef u64 ipath_err_t;
+
+/* The following change with the type of device, so
+ * need to be part of the ipath_devdata struct, or
+ * we could have problems plugging in devices of
+ * different types (e.g. one HT, one PCIE)
+ * in one system, to be managed by one driver.
+ * On the other hand, this file is may also be included
+ * by other code, so leave the declarations here
+ * temporarily. Minor footprint issue if common-model
+ * linker used, none if C89+ linker used.
+ */
+
+/* mask of defined bits for various registers */
+extern u64 infinipath_i_bitsextant;
+extern ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant;
+
+/* masks that are different in various chips, or only exist in some chips */
+extern u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
+
+/*
+ * These are the infinipath general register numbers (not offsets).
+ * The kernel registers are used directly, those beyond the kernel
+ * registers are calculated from one of the base registers. The use of
+ * an integer type doesn't allow type-checking as thorough as, say,
+ * an enum but allows for better hiding of chip differences.
+ */
+typedef const u16 ipath_kreg, /* infinipath general registers */
+ ipath_creg, /* infinipath counter registers */
+ ipath_sreg; /* kernel-only, infinipath send registers */
+
+/*
+ * These are the chip registers common to all infinipath chips, and
+ * used both by the kernel and the diagnostics or other user code.
+ * They are all implemented such that 64 bit accesses work.
+ * Some implement no more than 32 bits. Because 64 bit reads
+ * require 2 HT cmds on opteron, we access those with 32 bit
+ * reads for efficiency (they are written as 64 bits, since
+ * the extra 32 bits are nearly free on writes, and it slightly reduces
+ * complexity). The rest are all accessed as 64 bits.
+ */
+struct ipath_kregs {
+ /* These are the 32 bit group */
+ ipath_kreg kr_control;
+ ipath_kreg kr_counterregbase;
+ ipath_kreg kr_intmask;
+ ipath_kreg kr_intstatus;
+ ipath_kreg kr_pagealign;
+ ipath_kreg kr_portcnt;
+ ipath_kreg kr_rcvtidbase;
+ ipath_kreg kr_rcvtidcnt;
+ ipath_kreg kr_rcvegrbase;
+ ipath_kreg kr_rcvegrcnt;
+ ipath_kreg kr_scratch;
+ ipath_kreg kr_sendctrl;
+ ipath_kreg kr_sendpiobufbase;
+ ipath_kreg kr_sendpiobufcnt;
+ ipath_kreg kr_sendpiosize;
+ ipath_kreg kr_sendregbase;
+ ipath_kreg kr_userregbase;
+ /* These are the 64 bit group */
+ ipath_kreg kr_debugport;
+ ipath_kreg kr_debugportselect;
+ ipath_kreg kr_errorclear;
+ ipath_kreg kr_errormask;
+ ipath_kreg kr_errorstatus;
+ ipath_kreg kr_extctrl;
+ ipath_kreg kr_extstatus;
+ ipath_kreg kr_gpio_clear;
+ ipath_kreg kr_gpio_mask;
+ ipath_kreg kr_gpio_out;
+ ipath_kreg kr_gpio_status;
+ ipath_kreg kr_hwdiagctrl;
+ ipath_kreg kr_hwerrclear;
+ ipath_kreg kr_hwerrmask;
+ ipath_kreg kr_hwerrstatus;
+ ipath_kreg kr_ibcctrl;
+ ipath_kreg kr_ibcstatus;
+ ipath_kreg kr_intblocked;
+ ipath_kreg kr_intclear;
+ ipath_kreg kr_interruptconfig;
+ ipath_kreg kr_mdio;
+ ipath_kreg kr_partitionkey;
+ ipath_kreg kr_rcvbthqp;
+ ipath_kreg kr_rcvbufbase;
+ ipath_kreg kr_rcvbufsize;
+ ipath_kreg kr_rcvctrl;
+ ipath_kreg kr_rcvhdrcnt;
+ ipath_kreg kr_rcvhdrentsize;
+ ipath_kreg kr_rcvhdrsize;
+ ipath_kreg kr_rcvintmembase;
+ ipath_kreg kr_rcvintmemsize;
+ ipath_kreg kr_revision;
+ ipath_kreg kr_sendbuffererror;
+ ipath_kreg kr_sendpioavailaddr;
+ ipath_kreg kr_serdesconfig0;
+ ipath_kreg kr_serdesconfig1;
+ ipath_kreg kr_serdesstatus;
+ ipath_kreg kr_txintmembase;
+ ipath_kreg kr_txintmemsize;
+ ipath_kreg kr_xgxsconfig;
+ ipath_kreg kr_ibpllcfg;
+ /* use these two (and the following N ports) only with
+ * ipath_k*_kreg64_port(); not *kreg64() */
+ ipath_kreg kr_rcvhdraddr;
+ ipath_kreg kr_rcvhdrtailaddr;
+
+ /* remaining registers are not present on all types of infinipath
+ chips */
+ ipath_kreg kr_rcvpktledcnt;
+ ipath_kreg kr_pcierbuftestreg0;
+ ipath_kreg kr_pcierbuftestreg1;
+ ipath_kreg kr_pcieq0serdesconfig0;
+ ipath_kreg kr_pcieq0serdesconfig1;
+ ipath_kreg kr_pcieq0serdesstatus;
+ ipath_kreg kr_pcieq1serdesconfig0;
+ ipath_kreg kr_pcieq1serdesconfig1;
+ ipath_kreg kr_pcieq1serdesstatus;
+ ipath_kreg kr_hrtbt_guid;
+ ipath_kreg kr_ibcddrctrl;
+ ipath_kreg kr_ibcddrstatus;
+ ipath_kreg kr_jintreload;
+
+ /* send dma related regs */
+ ipath_kreg kr_senddmabase;
+ ipath_kreg kr_senddmalengen;
+ ipath_kreg kr_senddmatail;
+ ipath_kreg kr_senddmahead;
+ ipath_kreg kr_senddmaheadaddr;
+ ipath_kreg kr_senddmabufmask0;
+ ipath_kreg kr_senddmabufmask1;
+ ipath_kreg kr_senddmabufmask2;
+ ipath_kreg kr_senddmastatus;
+
+ /* SerDes related regs (IBA7220-only) */
+ ipath_kreg kr_ibserdesctrl;
+ ipath_kreg kr_ib_epbacc;
+ ipath_kreg kr_ib_epbtrans;
+ ipath_kreg kr_pcie_epbacc;
+ ipath_kreg kr_pcie_epbtrans;
+ ipath_kreg kr_ib_ddsrxeq;
+};
+
+struct ipath_cregs {
+ ipath_creg cr_badformatcnt;
+ ipath_creg cr_erricrccnt;
+ ipath_creg cr_errlinkcnt;
+ ipath_creg cr_errlpcrccnt;
+ ipath_creg cr_errpkey;
+ ipath_creg cr_errrcvflowctrlcnt;
+ ipath_creg cr_err_rlencnt;
+ ipath_creg cr_errslencnt;
+ ipath_creg cr_errtidfull;
+ ipath_creg cr_errtidvalid;
+ ipath_creg cr_errvcrccnt;
+ ipath_creg cr_ibstatuschange;
+ ipath_creg cr_intcnt;
+ ipath_creg cr_invalidrlencnt;
+ ipath_creg cr_invalidslencnt;
+ ipath_creg cr_lbflowstallcnt;
+ ipath_creg cr_iblinkdowncnt;
+ ipath_creg cr_iblinkerrrecovcnt;
+ ipath_creg cr_ibsymbolerrcnt;
+ ipath_creg cr_pktrcvcnt;
+ ipath_creg cr_pktrcvflowctrlcnt;
+ ipath_creg cr_pktsendcnt;
+ ipath_creg cr_pktsendflowcnt;
+ ipath_creg cr_portovflcnt;
+ ipath_creg cr_rcvebpcnt;
+ ipath_creg cr_rcvovflcnt;
+ ipath_creg cr_rxdroppktcnt;
+ ipath_creg cr_senddropped;
+ ipath_creg cr_sendstallcnt;
+ ipath_creg cr_sendunderruncnt;
+ ipath_creg cr_unsupvlcnt;
+ ipath_creg cr_wordrcvcnt;
+ ipath_creg cr_wordsendcnt;
+ ipath_creg cr_vl15droppedpktcnt;
+ ipath_creg cr_rxotherlocalphyerrcnt;
+ ipath_creg cr_excessbufferovflcnt;
+ ipath_creg cr_locallinkintegrityerrcnt;
+ ipath_creg cr_rxvlerrcnt;
+ ipath_creg cr_rxdlidfltrcnt;
+ ipath_creg cr_psstat;
+ ipath_creg cr_psstart;
+ ipath_creg cr_psinterval;
+ ipath_creg cr_psrcvdatacount;
+ ipath_creg cr_psrcvpktscount;
+ ipath_creg cr_psxmitdatacount;
+ ipath_creg cr_psxmitpktscount;
+ ipath_creg cr_psxmitwaitcount;
+};
+
+#endif /* _IPATH_REGISTERS_H */
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+/*
+ * Convert the AETH RNR timeout code into the number of milliseconds.
+ */
+const u32 ib_ipath_rnr_table[32] = {
+ 656, /* 0 */
+ 1, /* 1 */
+ 1, /* 2 */
+ 1, /* 3 */
+ 1, /* 4 */
+ 1, /* 5 */
+ 1, /* 6 */
+ 1, /* 7 */
+ 1, /* 8 */
+ 1, /* 9 */
+ 1, /* A */
+ 1, /* B */
+ 1, /* C */
+ 1, /* D */
+ 2, /* E */
+ 2, /* F */
+ 3, /* 10 */
+ 4, /* 11 */
+ 6, /* 12 */
+ 8, /* 13 */
+ 11, /* 14 */
+ 16, /* 15 */
+ 21, /* 16 */
+ 31, /* 17 */
+ 41, /* 18 */
+ 62, /* 19 */
+ 82, /* 1A */
+ 123, /* 1B */
+ 164, /* 1C */
+ 246, /* 1D */
+ 328, /* 1E */
+ 492 /* 1F */
+};
+
+/**
+ * ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
+ * @qp: the QP
+ *
+ * Called with the QP s_lock held and interrupts disabled.
+ * XXX Use a simple list for now. We might need a priority
+ * queue if we have lots of QPs waiting for RNR timeouts
+ * but that should be rare.
+ */
+void ipath_insert_rnr_queue(struct ipath_qp *qp)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+
+ /* We already did a spin_lock_irqsave(), so just use spin_lock */
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&dev->rnrwait))
+ list_add(&qp->timerwait, &dev->rnrwait);
+ else {
+ struct list_head *l = &dev->rnrwait;
+ struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
+ timerwait);
+
+ while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
+ qp->s_rnr_timeout -= nqp->s_rnr_timeout;
+ l = l->next;
+ if (l->next == &dev->rnrwait) {
+ nqp = NULL;
+ break;
+ }
+ nqp = list_entry(l->next, struct ipath_qp,
+ timerwait);
+ }
+ if (nqp)
+ nqp->s_rnr_timeout -= qp->s_rnr_timeout;
+ list_add(&qp->timerwait, l);
+ }
+ spin_unlock(&dev->pending_lock);
+}
+
+/**
+ * ipath_init_sge - Validate a RWQE and fill in the SGE state
+ * @qp: the QP
+ *
+ * Return 1 if OK.
+ */
+int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
+ u32 *lengthp, struct ipath_sge_state *ss)
+{
+ int i, j, ret;
+ struct ib_wc wc;
+
+ *lengthp = 0;
+ for (i = j = 0; i < wqe->num_sge; i++) {
+ if (wqe->sg_list[i].length == 0)
+ continue;
+ /* Check LKEY */
+ if (!ipath_lkey_ok(qp, j ? &ss->sg_list[j - 1] : &ss->sge,
+ &wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE))
+ goto bad_lkey;
+ *lengthp += wqe->sg_list[i].length;
+ j++;
+ }
+ ss->num_sge = j;
+ ret = 1;
+ goto bail;
+
+bad_lkey:
+ memset(&wc, 0, sizeof(wc));
+ wc.wr_id = wqe->wr_id;
+ wc.status = IB_WC_LOC_PROT_ERR;
+ wc.opcode = IB_WC_RECV;
+ wc.qp = &qp->ibqp;
+ /* Signal solicited completion event. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
+ ret = 0;
+bail:
+ return ret;
+}
+
+/**
+ * ipath_get_rwqe - copy the next RWQE into the QP's RWQE
+ * @qp: the QP
+ * @wr_id_only: update qp->r_wr_id only, not qp->r_sge
+ *
+ * Return 0 if no RWQE is available, otherwise return 1.
+ *
+ * Can be called from interrupt level.
+ */
+int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
+{
+ unsigned long flags;
+ struct ipath_rq *rq;
+ struct ipath_rwq *wq;
+ struct ipath_srq *srq;
+ struct ipath_rwqe *wqe;
+ void (*handler)(struct ib_event *, void *);
+ u32 tail;
+ int ret;
+
+ if (qp->ibqp.srq) {
+ srq = to_isrq(qp->ibqp.srq);
+ handler = srq->ibsrq.event_handler;
+ rq = &srq->rq;
+ } else {
+ srq = NULL;
+ handler = NULL;
+ rq = &qp->r_rq;
+ }
+
+ spin_lock_irqsave(&rq->lock, flags);
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ ret = 0;
+ goto unlock;
+ }
+
+ wq = rq->wq;
+ tail = wq->tail;
+ /* Validate tail before using it since it is user writable. */
+ if (tail >= rq->size)
+ tail = 0;
+ do {
+ if (unlikely(tail == wq->head)) {
+ ret = 0;
+ goto unlock;
+ }
+ /* Make sure entry is read after head index is read. */
+ smp_rmb();
+ wqe = get_rwqe_ptr(rq, tail);
+ if (++tail >= rq->size)
+ tail = 0;
+ if (wr_id_only)
+ break;
+ qp->r_sge.sg_list = qp->r_sg_list;
+ } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
+ qp->r_wr_id = wqe->wr_id;
+ wq->tail = tail;
+
+ ret = 1;
+ set_bit(IPATH_R_WRID_VALID, &qp->r_aflags);
+ if (handler) {
+ u32 n;
+
+ /*
+ * validate head pointer value and compute
+ * the number of remaining WQEs.
+ */
+ n = wq->head;
+ if (n >= rq->size)
+ n = 0;
+ if (n < tail)
+ n += rq->size - tail;
+ else
+ n -= tail;
+ if (n < srq->limit) {
+ struct ib_event ev;
+
+ srq->limit = 0;
+ spin_unlock_irqrestore(&rq->lock, flags);
+ ev.device = qp->ibqp.device;
+ ev.element.srq = qp->ibqp.srq;
+ ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
+ handler(&ev, srq->ibsrq.srq_context);
+ goto bail;
+ }
+ }
+unlock:
+ spin_unlock_irqrestore(&rq->lock, flags);
+bail:
+ return ret;
+}
+
+/**
+ * ipath_ruc_loopback - handle UC and RC lookback requests
+ * @sqp: the sending QP
+ *
+ * This is called from ipath_do_send() to
+ * forward a WQE addressed to the same HCA.
+ * Note that although we are single threaded due to the tasklet, we still
+ * have to protect against post_send(). We don't have to worry about
+ * receive interrupts since this is a connected protocol and all packets
+ * will pass through here.
+ */
+static void ipath_ruc_loopback(struct ipath_qp *sqp)
+{
+ struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
+ struct ipath_qp *qp;
+ struct ipath_swqe *wqe;
+ struct ipath_sge *sge;
+ unsigned long flags;
+ struct ib_wc wc;
+ u64 sdata;
+ atomic64_t *maddr;
+ enum ib_wc_status send_status;
+
+ /*
+ * Note that we check the responder QP state after
+ * checking the requester's state.
+ */
+ qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
+
+ spin_lock_irqsave(&sqp->s_lock, flags);
+
+ /* Return if we are already busy processing a work request. */
+ if ((sqp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
+ !(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
+ goto unlock;
+
+ sqp->s_flags |= IPATH_S_BUSY;
+
+again:
+ if (sqp->s_last == sqp->s_head)
+ goto clr_busy;
+ wqe = get_swqe_ptr(sqp, sqp->s_last);
+
+ /* Return if it is not OK to start a new work reqeust. */
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
+ goto clr_busy;
+ /* We are in the error state, flush the work request. */
+ send_status = IB_WC_WR_FLUSH_ERR;
+ goto flush_send;
+ }
+
+ /*
+ * We can rely on the entry not changing without the s_lock
+ * being held until we update s_last.
+ * We increment s_cur to indicate s_last is in progress.
+ */
+ if (sqp->s_last == sqp->s_cur) {
+ if (++sqp->s_cur >= sqp->s_size)
+ sqp->s_cur = 0;
+ }
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+
+ if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ dev->n_pkt_drops++;
+ /*
+ * For RC, the requester would timeout and retry so
+ * shortcut the timeouts and just signal too many retries.
+ */
+ if (sqp->ibqp.qp_type == IB_QPT_RC)
+ send_status = IB_WC_RETRY_EXC_ERR;
+ else
+ send_status = IB_WC_SUCCESS;
+ goto serr;
+ }
+
+ memset(&wc, 0, sizeof wc);
+ send_status = IB_WC_SUCCESS;
+
+ sqp->s_sge.sge = wqe->sg_list[0];
+ sqp->s_sge.sg_list = wqe->sg_list + 1;
+ sqp->s_sge.num_sge = wqe->wr.num_sge;
+ sqp->s_len = wqe->length;
+ switch (wqe->wr.opcode) {
+ case IB_WR_SEND_WITH_IMM:
+ wc.wc_flags = IB_WC_WITH_IMM;
+ wc.ex.imm_data = wqe->wr.ex.imm_data;
+ /* FALLTHROUGH */
+ case IB_WR_SEND:
+ if (!ipath_get_rwqe(qp, 0))
+ goto rnr_nak;
+ break;
+
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
+ goto inv_err;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ wc.ex.imm_data = wqe->wr.ex.imm_data;
+ if (!ipath_get_rwqe(qp, 1))
+ goto rnr_nak;
+ /* FALLTHROUGH */
+ case IB_WR_RDMA_WRITE:
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
+ goto inv_err;
+ if (wqe->length == 0)
+ break;
+ if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length,
+ wqe->wr.wr.rdma.remote_addr,
+ wqe->wr.wr.rdma.rkey,
+ IB_ACCESS_REMOTE_WRITE)))
+ goto acc_err;
+ break;
+
+ case IB_WR_RDMA_READ:
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ)))
+ goto inv_err;
+ if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length,
+ wqe->wr.wr.rdma.remote_addr,
+ wqe->wr.wr.rdma.rkey,
+ IB_ACCESS_REMOTE_READ)))
+ goto acc_err;
+ qp->r_sge.sge = wqe->sg_list[0];
+ qp->r_sge.sg_list = wqe->sg_list + 1;
+ qp->r_sge.num_sge = wqe->wr.num_sge;
+ break;
+
+ case IB_WR_ATOMIC_CMP_AND_SWP:
+ case IB_WR_ATOMIC_FETCH_AND_ADD:
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
+ goto inv_err;
+ if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64),
+ wqe->wr.wr.atomic.remote_addr,
+ wqe->wr.wr.atomic.rkey,
+ IB_ACCESS_REMOTE_ATOMIC)))
+ goto acc_err;
+ /* Perform atomic OP and save result. */
+ maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
+ sdata = wqe->wr.wr.atomic.compare_add;
+ *(u64 *) sqp->s_sge.sge.vaddr =
+ (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ?
+ (u64) atomic64_add_return(sdata, maddr) - sdata :
+ (u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
+ sdata, wqe->wr.wr.atomic.swap);
+ goto send_comp;
+
+ default:
+ send_status = IB_WC_LOC_QP_OP_ERR;
+ goto serr;
+ }
+
+ sge = &sqp->s_sge.sge;
+ while (sqp->s_len) {
+ u32 len = sqp->s_len;
+
+ if (len > sge->length)
+ len = sge->length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--sqp->s_sge.num_sge)
+ *sge = *sqp->s_sge.sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ sqp->s_len -= len;
+ }
+
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
+ goto send_comp;
+
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ else
+ wc.opcode = IB_WC_RECV;
+ wc.wr_id = qp->r_wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.byte_len = wqe->length;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = qp->remote_qpn;
+ wc.slid = qp->remote_ah_attr.dlid;
+ wc.sl = qp->remote_ah_attr.sl;
+ wc.port_num = 1;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
+ wqe->wr.send_flags & IB_SEND_SOLICITED);
+
+send_comp:
+ spin_lock_irqsave(&sqp->s_lock, flags);
+flush_send:
+ sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
+ ipath_send_complete(sqp, wqe, send_status);
+ goto again;
+
+rnr_nak:
+ /* Handle RNR NAK */
+ if (qp->ibqp.qp_type == IB_QPT_UC)
+ goto send_comp;
+ /*
+ * Note: we don't need the s_lock held since the BUSY flag
+ * makes this single threaded.
+ */
+ if (sqp->s_rnr_retry == 0) {
+ send_status = IB_WC_RNR_RETRY_EXC_ERR;
+ goto serr;
+ }
+ if (sqp->s_rnr_retry_cnt < 7)
+ sqp->s_rnr_retry--;
+ spin_lock_irqsave(&sqp->s_lock, flags);
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_RECV_OK))
+ goto clr_busy;
+ sqp->s_flags |= IPATH_S_WAITING;
+ dev->n_rnr_naks++;
+ sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer];
+ ipath_insert_rnr_queue(sqp);
+ goto clr_busy;
+
+inv_err:
+ send_status = IB_WC_REM_INV_REQ_ERR;
+ wc.status = IB_WC_LOC_QP_OP_ERR;
+ goto err;
+
+acc_err:
+ send_status = IB_WC_REM_ACCESS_ERR;
+ wc.status = IB_WC_LOC_PROT_ERR;
+err:
+ /* responder goes to error state */
+ ipath_rc_error(qp, wc.status);
+
+serr:
+ spin_lock_irqsave(&sqp->s_lock, flags);
+ ipath_send_complete(sqp, wqe, send_status);
+ if (sqp->ibqp.qp_type == IB_QPT_RC) {
+ int lastwqe = ipath_error_qp(sqp, IB_WC_WR_FLUSH_ERR);
+
+ sqp->s_flags &= ~IPATH_S_BUSY;
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+ if (lastwqe) {
+ struct ib_event ev;
+
+ ev.device = sqp->ibqp.device;
+ ev.element.qp = &sqp->ibqp;
+ ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
+ sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context);
+ }
+ goto done;
+ }
+clr_busy:
+ sqp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+done:
+ if (qp && atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+}
+
+static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
+{
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
+ qp->ibqp.qp_type == IB_QPT_SMI) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+}
+
+/**
+ * ipath_no_bufs_available - tell the layer driver we need buffers
+ * @qp: the QP that caused the problem
+ * @dev: the device we ran out of buffers on
+ *
+ * Called when we run out of PIO buffers.
+ * If we are now in the error state, return zero to flush the
+ * send work request.
+ */
+static int ipath_no_bufs_available(struct ipath_qp *qp,
+ struct ipath_ibdev *dev)
+{
+ unsigned long flags;
+ int ret = 1;
+
+ /*
+ * Note that as soon as want_buffer() is called and
+ * possibly before it returns, ipath_ib_piobufavail()
+ * could be called. Therefore, put QP on the piowait list before
+ * enabling the PIO avail interrupt.
+ */
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
+ dev->n_piowait++;
+ qp->s_flags |= IPATH_S_WAITING;
+ qp->s_flags &= ~IPATH_S_BUSY;
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&qp->piowait))
+ list_add_tail(&qp->piowait, &dev->piowait);
+ spin_unlock(&dev->pending_lock);
+ } else
+ ret = 0;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ if (ret)
+ want_buffer(dev->dd, qp);
+ return ret;
+}
+
+/**
+ * ipath_make_grh - construct a GRH header
+ * @dev: a pointer to the ipath device
+ * @hdr: a pointer to the GRH header being constructed
+ * @grh: the global route address to send to
+ * @hwords: the number of 32 bit words of header being sent
+ * @nwords: the number of 32 bit words of data being sent
+ *
+ * Return the size of the header in 32 bit words.
+ */
+u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
+ struct ib_global_route *grh, u32 hwords, u32 nwords)
+{
+ hdr->version_tclass_flow =
+ cpu_to_be32((6 << 28) |
+ (grh->traffic_class << 20) |
+ grh->flow_label);
+ hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2);
+ /* next_hdr is defined by C8-7 in ch. 8.4.1 */
+ hdr->next_hdr = 0x1B;
+ hdr->hop_limit = grh->hop_limit;
+ /* The SGID is 32-bit aligned. */
+ hdr->sgid.global.subnet_prefix = dev->gid_prefix;
+ hdr->sgid.global.interface_id = dev->dd->ipath_guid;
+ hdr->dgid = grh->dgid;
+
+ /* GRH header size in 32-bit words. */
+ return sizeof(struct ib_grh) / sizeof(u32);
+}
+
+void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr,
+ u32 bth0, u32 bth2)
+{
+ u16 lrh0;
+ u32 nwords;
+ u32 extra_bytes;
+
+ /* Construct the header. */
+ extra_bytes = -qp->s_cur_size & 3;
+ nwords = (qp->s_cur_size + extra_bytes) >> 2;
+ lrh0 = IPATH_LRH_BTH;
+ if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
+ qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
+ &qp->remote_ah_attr.grh,
+ qp->s_hdrwords, nwords);
+ lrh0 = IPATH_LRH_GRH;
+ }
+ lrh0 |= qp->remote_ah_attr.sl << 4;
+ qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
+ qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
+ qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC);
+ qp->s_hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid |
+ qp->remote_ah_attr.src_path_bits);
+ bth0 |= ipath_get_pkey(dev->dd, qp->s_pkey_index);
+ bth0 |= extra_bytes << 20;
+ ohdr->bth[0] = cpu_to_be32(bth0 | (1 << 22));
+ ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
+ ohdr->bth[2] = cpu_to_be32(bth2);
+}
+
+/**
+ * ipath_do_send - perform a send on a QP
+ * @data: contains a pointer to the QP
+ *
+ * Process entries in the send work queue until credit or queue is
+ * exhausted. Only allow one CPU to send a packet per QP (tasklet).
+ * Otherwise, two threads could send packets out of order.
+ */
+void ipath_do_send(unsigned long data)
+{
+ struct ipath_qp *qp = (struct ipath_qp *)data;
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ int (*make_req)(struct ipath_qp *qp);
+ unsigned long flags;
+
+ if ((qp->ibqp.qp_type == IB_QPT_RC ||
+ qp->ibqp.qp_type == IB_QPT_UC) &&
+ qp->remote_ah_attr.dlid == dev->dd->ipath_lid) {
+ ipath_ruc_loopback(qp);
+ goto bail;
+ }
+
+ if (qp->ibqp.qp_type == IB_QPT_RC)
+ make_req = ipath_make_rc_req;
+ else if (qp->ibqp.qp_type == IB_QPT_UC)
+ make_req = ipath_make_uc_req;
+ else
+ make_req = ipath_make_ud_req;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Return if we are already busy processing a work request. */
+ if ((qp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
+ !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND)) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ goto bail;
+ }
+
+ qp->s_flags |= IPATH_S_BUSY;
+
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+again:
+ /* Check for a constructed packet to be sent. */
+ if (qp->s_hdrwords != 0) {
+ /*
+ * If no PIO bufs are available, return. An interrupt will
+ * call ipath_ib_piobufavail() when one is available.
+ */
+ if (ipath_verbs_send(qp, &qp->s_hdr, qp->s_hdrwords,
+ qp->s_cur_sge, qp->s_cur_size)) {
+ if (ipath_no_bufs_available(qp, dev))
+ goto bail;
+ }
+ dev->n_unicast_xmit++;
+ /* Record that we sent the packet and s_hdr is empty. */
+ qp->s_hdrwords = 0;
+ }
+
+ if (make_req(qp))
+ goto again;
+
+bail:;
+}
+
+/*
+ * This should be called with s_lock held.
+ */
+void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
+ enum ib_wc_status status)
+{
+ u32 old_last, last;
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
+ return;
+
+ /* See ch. 11.2.4.1 and 10.7.3.1 */
+ if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
+ (wqe->wr.send_flags & IB_SEND_SIGNALED) ||
+ status != IB_WC_SUCCESS) {
+ struct ib_wc wc;
+
+ memset(&wc, 0, sizeof wc);
+ wc.wr_id = wqe->wr.wr_id;
+ wc.status = status;
+ wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+ wc.qp = &qp->ibqp;
+ if (status == IB_WC_SUCCESS)
+ wc.byte_len = wqe->length;
+ ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc,
+ status != IB_WC_SUCCESS);
+ }
+
+ old_last = last = qp->s_last;
+ if (++last >= qp->s_size)
+ last = 0;
+ qp->s_last = last;
+ if (qp->s_cur == old_last)
+ qp->s_cur = last;
+ if (qp->s_tail == old_last)
+ qp->s_tail = last;
+ if (qp->state == IB_QPS_SQD && last == qp->s_cur)
+ qp->s_draining = 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+#define SDMA_DESCQ_SZ PAGE_SIZE /* 256 entries per 4KB page */
+
+static void vl15_watchdog_enq(struct ipath_devdata *dd)
+{
+ /* ipath_sdma_lock must already be held */
+ if (atomic_inc_return(&dd->ipath_sdma_vl15_count) == 1) {
+ unsigned long interval = (HZ + 19) / 20;
+ dd->ipath_sdma_vl15_timer.expires = jiffies + interval;
+ add_timer(&dd->ipath_sdma_vl15_timer);
+ }
+}
+
+static void vl15_watchdog_deq(struct ipath_devdata *dd)
+{
+ /* ipath_sdma_lock must already be held */
+ if (atomic_dec_return(&dd->ipath_sdma_vl15_count) != 0) {
+ unsigned long interval = (HZ + 19) / 20;
+ mod_timer(&dd->ipath_sdma_vl15_timer, jiffies + interval);
+ } else {
+ del_timer(&dd->ipath_sdma_vl15_timer);
+ }
+}
+
+static void vl15_watchdog_timeout(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (atomic_read(&dd->ipath_sdma_vl15_count) != 0) {
+ ipath_dbg("vl15 watchdog timeout - clearing\n");
+ ipath_cancel_sends(dd, 1);
+ ipath_hol_down(dd);
+ } else {
+ ipath_dbg("vl15 watchdog timeout - "
+ "condition already cleared\n");
+ }
+}
+
+static void unmap_desc(struct ipath_devdata *dd, unsigned head)
+{
+ __le64 *descqp = &dd->ipath_sdma_descq[head].qw[0];
+ u64 desc[2];
+ dma_addr_t addr;
+ size_t len;
+
+ desc[0] = le64_to_cpu(descqp[0]);
+ desc[1] = le64_to_cpu(descqp[1]);
+
+ addr = (desc[1] << 32) | (desc[0] >> 32);
+ len = (desc[0] >> 14) & (0x7ffULL << 2);
+ dma_unmap_single(&dd->pcidev->dev, addr, len, DMA_TO_DEVICE);
+}
+
+/*
+ * ipath_sdma_lock should be locked before calling this.
+ */
+int ipath_sdma_make_progress(struct ipath_devdata *dd)
+{
+ struct list_head *lp = NULL;
+ struct ipath_sdma_txreq *txp = NULL;
+ u16 dmahead;
+ u16 start_idx = 0;
+ int progress = 0;
+
+ if (!list_empty(&dd->ipath_sdma_activelist)) {
+ lp = dd->ipath_sdma_activelist.next;
+ txp = list_entry(lp, struct ipath_sdma_txreq, list);
+ start_idx = txp->start_idx;
+ }
+
+ /*
+ * Read the SDMA head register in order to know that the
+ * interrupt clear has been written to the chip.
+ * Otherwise, we may not get an interrupt for the last
+ * descriptor in the queue.
+ */
+ dmahead = (u16)ipath_read_kreg32(dd, dd->ipath_kregs->kr_senddmahead);
+ /* sanity check return value for error handling (chip reset, etc.) */
+ if (dmahead >= dd->ipath_sdma_descq_cnt)
+ goto done;
+
+ while (dd->ipath_sdma_descq_head != dmahead) {
+ if (txp && txp->flags & IPATH_SDMA_TXREQ_F_FREEDESC &&
+ dd->ipath_sdma_descq_head == start_idx) {
+ unmap_desc(dd, dd->ipath_sdma_descq_head);
+ start_idx++;
+ if (start_idx == dd->ipath_sdma_descq_cnt)
+ start_idx = 0;
+ }
+
+ /* increment free count and head */
+ dd->ipath_sdma_descq_removed++;
+ if (++dd->ipath_sdma_descq_head == dd->ipath_sdma_descq_cnt)
+ dd->ipath_sdma_descq_head = 0;
+
+ if (txp && txp->next_descq_idx == dd->ipath_sdma_descq_head) {
+ /* move to notify list */
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(lp, &dd->ipath_sdma_notifylist);
+ if (!list_empty(&dd->ipath_sdma_activelist)) {
+ lp = dd->ipath_sdma_activelist.next;
+ txp = list_entry(lp, struct ipath_sdma_txreq,
+ list);
+ start_idx = txp->start_idx;
+ } else {
+ lp = NULL;
+ txp = NULL;
+ }
+ }
+ progress = 1;
+ }
+
+ if (progress)
+ tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
+
+done:
+ return progress;
+}
+
+static void ipath_sdma_notify(struct ipath_devdata *dd, struct list_head *list)
+{
+ struct ipath_sdma_txreq *txp, *txp_next;
+
+ list_for_each_entry_safe(txp, txp_next, list, list) {
+ list_del_init(&txp->list);
+
+ if (txp->callback)
+ (*txp->callback)(txp->callback_cookie,
+ txp->callback_status);
+ }
+}
+
+static void sdma_notify_taskbody(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ list_splice_init(&dd->ipath_sdma_notifylist, &list);
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ ipath_sdma_notify(dd, &list);
+
+ /*
+ * The IB verbs layer needs to see the callback before getting
+ * the call to ipath_ib_piobufavail() because the callback
+ * handles releasing resources the next send will need.
+ * Otherwise, we could do these calls in
+ * ipath_sdma_make_progress().
+ */
+ ipath_ib_piobufavail(dd->verbs_dev);
+}
+
+static void sdma_notify_task(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ sdma_notify_taskbody(dd);
+}
+
+static void dump_sdma_state(struct ipath_devdata *dd)
+{
+ unsigned long reg;
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus);
+ ipath_cdbg(VERBOSE, "kr_senddmastatus: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendctrl);
+ ipath_cdbg(VERBOSE, "kr_sendctrl: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask0);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask0: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask1);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask1: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask2);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask2: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
+ ipath_cdbg(VERBOSE, "kr_senddmatail: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
+ ipath_cdbg(VERBOSE, "kr_senddmahead: 0x%016lx\n", reg);
+}
+
+static void sdma_abort_task(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+ u64 status;
+ unsigned long flags;
+
+ if (test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ return;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ status = dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK;
+
+ /* nothing to do */
+ if (status == IPATH_SDMA_ABORT_NONE)
+ goto unlock;
+
+ /* ipath_sdma_abort() is done, waiting for interrupt */
+ if (status == IPATH_SDMA_ABORT_DISARMED) {
+ if (time_before(jiffies, dd->ipath_sdma_abort_intr_timeout))
+ goto resched_noprint;
+ /* give up, intr got lost somewhere */
+ ipath_dbg("give up waiting for SDMADISABLED intr\n");
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ status = IPATH_SDMA_ABORT_ABORTED;
+ }
+
+ /* everything is stopped, time to clean up and restart */
+ if (status == IPATH_SDMA_ABORT_ABORTED) {
+ struct ipath_sdma_txreq *txp, *txpnext;
+ u64 hwstatus;
+ int notify = 0;
+
+ hwstatus = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_senddmastatus);
+
+ if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
+ IPATH_SDMA_STATUS_ABORT_IN_PROG |
+ IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
+ !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
+ if (dd->ipath_sdma_reset_wait > 0) {
+ /* not done shutting down sdma */
+ --dd->ipath_sdma_reset_wait;
+ goto resched;
+ }
+ ipath_cdbg(VERBOSE, "gave up waiting for quiescent "
+ "status after SDMA reset, continuing\n");
+ dump_sdma_state(dd);
+ }
+
+ /* dequeue all "sent" requests */
+ list_for_each_entry_safe(txp, txpnext,
+ &dd->ipath_sdma_activelist, list) {
+ txp->callback_status = IPATH_SDMA_TXREQ_S_ABORTED;
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
+ notify = 1;
+ }
+ if (notify)
+ tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
+
+ /* reset our notion of head and tail */
+ dd->ipath_sdma_descq_tail = 0;
+ dd->ipath_sdma_descq_head = 0;
+ dd->ipath_sdma_head_dma[0] = 0;
+ dd->ipath_sdma_generation = 0;
+ dd->ipath_sdma_descq_removed = dd->ipath_sdma_descq_added;
+
+ /* Reset SendDmaLenGen */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen,
+ (u64) dd->ipath_sdma_descq_cnt | (1ULL << 18));
+
+ /* done with sdma state for a bit */
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ /*
+ * Don't restart sdma here (with the exception
+ * below). Wait until link is up to ACTIVE. VL15 MADs
+ * used to bring the link up use PIO, and multiple link
+ * transitions otherwise cause the sdma engine to be
+ * stopped and started multiple times.
+ * The disable is done here, including the shadow,
+ * so the state is kept consistent.
+ * See ipath_restart_sdma() for the actual starting
+ * of sdma.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* make sure I see next message */
+ dd->ipath_sdma_abort_jiffies = 0;
+
+ /*
+ * Not everything that takes SDMA offline is a link
+ * status change. If the link was up, restart SDMA.
+ */
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ ipath_restart_sdma(dd);
+
+ goto done;
+ }
+
+resched:
+ /*
+ * for now, keep spinning
+ * JAG - this is bad to just have default be a loop without
+ * state change
+ */
+ if (time_after(jiffies, dd->ipath_sdma_abort_jiffies)) {
+ ipath_dbg("looping with status 0x%08lx\n",
+ dd->ipath_sdma_status);
+ dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
+ }
+resched_noprint:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ return;
+
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+done:
+ return;
+}
+
+/*
+ * This is called from interrupt context.
+ */
+void ipath_sdma_intr(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ (void) ipath_sdma_make_progress(dd);
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+}
+
+static int alloc_sdma(struct ipath_devdata *dd)
+{
+ int ret = 0;
+
+ /* Allocate memory for SendDMA descriptor FIFO */
+ dd->ipath_sdma_descq = dma_alloc_coherent(&dd->pcidev->dev,
+ SDMA_DESCQ_SZ, &dd->ipath_sdma_descq_phys, GFP_KERNEL);
+
+ if (!dd->ipath_sdma_descq) {
+ ipath_dev_err(dd, "failed to allocate SendDMA descriptor "
+ "FIFO memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ dd->ipath_sdma_descq_cnt =
+ SDMA_DESCQ_SZ / sizeof(struct ipath_sdma_desc);
+
+ /* Allocate memory for DMA of head register to memory */
+ dd->ipath_sdma_head_dma = dma_alloc_coherent(&dd->pcidev->dev,
+ PAGE_SIZE, &dd->ipath_sdma_head_phys, GFP_KERNEL);
+ if (!dd->ipath_sdma_head_dma) {
+ ipath_dev_err(dd, "failed to allocate SendDMA head memory\n");
+ ret = -ENOMEM;
+ goto cleanup_descq;
+ }
+ dd->ipath_sdma_head_dma[0] = 0;
+
+ init_timer(&dd->ipath_sdma_vl15_timer);
+ dd->ipath_sdma_vl15_timer.function = vl15_watchdog_timeout;
+ dd->ipath_sdma_vl15_timer.data = (unsigned long)dd;
+ atomic_set(&dd->ipath_sdma_vl15_count, 0);
+
+ goto done;
+
+cleanup_descq:
+ dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
+ (void *)dd->ipath_sdma_descq, dd->ipath_sdma_descq_phys);
+ dd->ipath_sdma_descq = NULL;
+ dd->ipath_sdma_descq_phys = 0;
+done:
+ return ret;
+}
+
+int setup_sdma(struct ipath_devdata *dd)
+{
+ int ret = 0;
+ unsigned i, n;
+ u64 tmp64;
+ u64 senddmabufmask[3] = { 0 };
+ unsigned long flags;
+
+ ret = alloc_sdma(dd);
+ if (ret)
+ goto done;
+
+ if (!dd->ipath_sdma_descq) {
+ ipath_dev_err(dd, "SendDMA memory not allocated\n");
+ goto done;
+ }
+
+ /*
+ * Set initial status as if we had been up, then gone down.
+ * This lets initial start on transition to ACTIVE be the
+ * same as restart after link flap.
+ */
+ dd->ipath_sdma_status = IPATH_SDMA_ABORT_ABORTED;
+ dd->ipath_sdma_abort_jiffies = 0;
+ dd->ipath_sdma_generation = 0;
+ dd->ipath_sdma_descq_tail = 0;
+ dd->ipath_sdma_descq_head = 0;
+ dd->ipath_sdma_descq_removed = 0;
+ dd->ipath_sdma_descq_added = 0;
+
+ /* Set SendDmaBase */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase,
+ dd->ipath_sdma_descq_phys);
+ /* Set SendDmaLenGen */
+ tmp64 = dd->ipath_sdma_descq_cnt;
+ tmp64 |= 1<<18; /* enable generation checking */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, tmp64);
+ /* Set SendDmaTail */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail,
+ dd->ipath_sdma_descq_tail);
+ /* Set SendDmaHeadAddr */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
+ dd->ipath_sdma_head_phys);
+
+ /*
+ * Reserve all the former "kernel" piobufs, using high number range
+ * so we get as many 4K buffers as possible
+ */
+ n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ i = dd->ipath_lastport_piobuf + dd->ipath_pioreserved;
+ ipath_chg_pioavailkernel(dd, i, n - i , 0);
+ for (; i < n; ++i) {
+ unsigned word = i / 64;
+ unsigned bit = i & 63;
+ BUG_ON(word >= 3);
+ senddmabufmask[word] |= 1ULL << bit;
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
+ senddmabufmask[0]);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
+ senddmabufmask[1]);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2,
+ senddmabufmask[2]);
+
+ INIT_LIST_HEAD(&dd->ipath_sdma_activelist);
+ INIT_LIST_HEAD(&dd->ipath_sdma_notifylist);
+
+ tasklet_init(&dd->ipath_sdma_notify_task, sdma_notify_task,
+ (unsigned long) dd);
+ tasklet_init(&dd->ipath_sdma_abort_task, sdma_abort_task,
+ (unsigned long) dd);
+
+ /*
+ * No use to turn on SDMA here, as link is probably not ACTIVE
+ * Just mark it RUNNING and enable the interrupt, and let the
+ * ipath_restart_sdma() on link transition to ACTIVE actually
+ * enable it.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_SDMAINTENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ __set_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+done:
+ return ret;
+}
+
+void teardown_sdma(struct ipath_devdata *dd)
+{
+ struct ipath_sdma_txreq *txp, *txpnext;
+ unsigned long flags;
+ dma_addr_t sdma_head_phys = 0;
+ dma_addr_t sdma_descq_phys = 0;
+ void *sdma_descq = NULL;
+ void *sdma_head_dma = NULL;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __clear_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
+ __set_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ __set_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ tasklet_kill(&dd->ipath_sdma_abort_task);
+ tasklet_kill(&dd->ipath_sdma_notify_task);
+
+ /* turn off sdma */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ /* dequeue all "sent" requests */
+ list_for_each_entry_safe(txp, txpnext, &dd->ipath_sdma_activelist,
+ list) {
+ txp->callback_status = IPATH_SDMA_TXREQ_S_SHUTDOWN;
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ sdma_notify_taskbody(dd);
+
+ del_timer_sync(&dd->ipath_sdma_vl15_timer);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ dd->ipath_sdma_abort_jiffies = 0;
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2, 0);
+
+ if (dd->ipath_sdma_head_dma) {
+ sdma_head_dma = (void *) dd->ipath_sdma_head_dma;
+ sdma_head_phys = dd->ipath_sdma_head_phys;
+ dd->ipath_sdma_head_dma = NULL;
+ dd->ipath_sdma_head_phys = 0;
+ }
+
+ if (dd->ipath_sdma_descq) {
+ sdma_descq = dd->ipath_sdma_descq;
+ sdma_descq_phys = dd->ipath_sdma_descq_phys;
+ dd->ipath_sdma_descq = NULL;
+ dd->ipath_sdma_descq_phys = 0;
+ }
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ if (sdma_head_dma)
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ sdma_head_dma, sdma_head_phys);
+
+ if (sdma_descq)
+ dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
+ sdma_descq, sdma_descq_phys);
+}
+
+/*
+ * [Re]start SDMA, if we use it, and it's not already OK.
+ * This is called on transition to link ACTIVE, either the first or
+ * subsequent times.
+ */
+void ipath_restart_sdma(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ int needed = 1;
+
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
+ goto bail;
+
+ /*
+ * First, make sure we should, which is to say,
+ * check that we are "RUNNING" (not in teardown)
+ * and not "SHUTDOWN"
+ */
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ if (!test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)
+ || test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ needed = 0;
+ else {
+ __clear_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ __clear_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+ __clear_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!needed) {
+ ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
+ dd->ipath_sdma_status);
+ goto bail;
+ }
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ /*
+ * First clear, just to be safe. Enable is only done
+ * in chip on 0->1 transition
+ */
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ dd->ipath_sendctrl |= INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* notify upper layers */
+ ipath_ib_piobufavail(dd->verbs_dev);
+
+bail:
+ return;
+}
+
+static inline void make_sdma_desc(struct ipath_devdata *dd,
+ u64 *sdmadesc, u64 addr, u64 dwlen, u64 dwoffset)
+{
+ WARN_ON(addr & 3);
+ /* SDmaPhyAddr[47:32] */
+ sdmadesc[1] = addr >> 32;
+ /* SDmaPhyAddr[31:0] */
+ sdmadesc[0] = (addr & 0xfffffffcULL) << 32;
+ /* SDmaGeneration[1:0] */
+ sdmadesc[0] |= (dd->ipath_sdma_generation & 3ULL) << 30;
+ /* SDmaDwordCount[10:0] */
+ sdmadesc[0] |= (dwlen & 0x7ffULL) << 16;
+ /* SDmaBufOffset[12:2] */
+ sdmadesc[0] |= dwoffset & 0x7ffULL;
+}
+
+/*
+ * This function queues one IB packet onto the send DMA queue per call.
+ * The caller is responsible for checking:
+ * 1) The number of send DMA descriptor entries is less than the size of
+ * the descriptor queue.
+ * 2) The IB SGE addresses and lengths are 32-bit aligned
+ * (except possibly the last SGE's length)
+ * 3) The SGE addresses are suitable for passing to dma_map_single().
+ */
+int ipath_sdma_verbs_send(struct ipath_devdata *dd,
+ struct ipath_sge_state *ss, u32 dwords,
+ struct ipath_verbs_txreq *tx)
+{
+
+ unsigned long flags;
+ struct ipath_sge *sge;
+ int ret = 0;
+ u16 tail;
+ __le64 *descqp;
+ u64 sdmadesc[2];
+ u32 dwoffset;
+ dma_addr_t addr;
+
+ if ((tx->map_len + (dwords<<2)) > dd->ipath_ibmaxlen) {
+ ipath_dbg("packet size %X > ibmax %X, fail\n",
+ tx->map_len + (dwords<<2), dd->ipath_ibmaxlen);
+ ret = -EMSGSIZE;
+ goto fail;
+ }
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+retry:
+ if (unlikely(test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status))) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ if (tx->txreq.sg_count > ipath_sdma_descq_freecnt(dd)) {
+ if (ipath_sdma_make_progress(dd))
+ goto retry;
+ ret = -ENOBUFS;
+ goto unlock;
+ }
+
+ addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
+ tx->map_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&dd->pcidev->dev, addr))
+ goto ioerr;
+
+ dwoffset = tx->map_len >> 2;
+ make_sdma_desc(dd, sdmadesc, (u64) addr, dwoffset, 0);
+
+ /* SDmaFirstDesc */
+ sdmadesc[0] |= 1ULL << 12;
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
+ sdmadesc[0] |= 1ULL << 14; /* SDmaUseLargeBuf */
+
+ /* write to the descq */
+ tail = dd->ipath_sdma_descq_tail;
+ descqp = &dd->ipath_sdma_descq[tail].qw[0];
+ *descqp++ = cpu_to_le64(sdmadesc[0]);
+ *descqp++ = cpu_to_le64(sdmadesc[1]);
+
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEDESC)
+ tx->txreq.start_idx = tail;
+
+ /* increment the tail */
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ descqp = &dd->ipath_sdma_descq[0].qw[0];
+ ++dd->ipath_sdma_generation;
+ }
+
+ sge = &ss->sge;
+ while (dwords) {
+ u32 dw;
+ u32 len;
+
+ len = dwords << 2;
+ if (len > sge->length)
+ len = sge->length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ dw = (len + 3) >> 2;
+ addr = dma_map_single(&dd->pcidev->dev, sge->vaddr, dw << 2,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&dd->pcidev->dev, addr))
+ goto unmap;
+ make_sdma_desc(dd, sdmadesc, (u64) addr, dw, dwoffset);
+ /* SDmaUseLargeBuf has to be set in every descriptor */
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
+ sdmadesc[0] |= 1ULL << 14;
+ /* write to the descq */
+ *descqp++ = cpu_to_le64(sdmadesc[0]);
+ *descqp++ = cpu_to_le64(sdmadesc[1]);
+
+ /* increment the tail */
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ descqp = &dd->ipath_sdma_descq[0].qw[0];
+ ++dd->ipath_sdma_generation;
+ }
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+
+ dwoffset += dw;
+ dwords -= dw;
+ }
+
+ if (!tail)
+ descqp = &dd->ipath_sdma_descq[dd->ipath_sdma_descq_cnt].qw[0];
+ descqp -= 2;
+ /* SDmaLastDesc */
+ descqp[0] |= cpu_to_le64(1ULL << 11);
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_INTREQ) {
+ /* SDmaIntReq */
+ descqp[0] |= cpu_to_le64(1ULL << 15);
+ }
+
+ /* Commit writes to memory and advance the tail on the chip */
+ wmb();
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
+
+ tx->txreq.next_descq_idx = tail;
+ tx->txreq.callback_status = IPATH_SDMA_TXREQ_S_OK;
+ dd->ipath_sdma_descq_tail = tail;
+ dd->ipath_sdma_descq_added += tx->txreq.sg_count;
+ list_add_tail(&tx->txreq.list, &dd->ipath_sdma_activelist);
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_enq(dd);
+ goto unlock;
+
+unmap:
+ while (tail != dd->ipath_sdma_descq_tail) {
+ if (!tail)
+ tail = dd->ipath_sdma_descq_cnt - 1;
+ else
+ tail--;
+ unmap_desc(dd, tail);
+ }
+ioerr:
+ ret = -EIO;
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+fail:
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include "ipath_verbs.h"
+
+/**
+ * ipath_post_srq_receive - post a receive on a shared receive queue
+ * @ibsrq: the SRQ to post the receive on
+ * @wr: the list of work requests to post
+ * @bad_wr: the first WR to cause a problem is put here
+ *
+ * This may be called from interrupt context.
+ */
+int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
+ struct ib_recv_wr **bad_wr)
+{
+ struct ipath_srq *srq = to_isrq(ibsrq);
+ struct ipath_rwq *wq;
+ unsigned long flags;
+ int ret;
+
+ for (; wr; wr = wr->next) {
+ struct ipath_rwqe *wqe;
+ u32 next;
+ int i;
+
+ if ((unsigned) wr->num_sge > srq->rq.max_sge) {
+ *bad_wr = wr;
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ spin_lock_irqsave(&srq->rq.lock, flags);
+ wq = srq->rq.wq;
+ next = wq->head + 1;
+ if (next >= srq->rq.size)
+ next = 0;
+ if (next == wq->tail) {
+ spin_unlock_irqrestore(&srq->rq.lock, flags);
+ *bad_wr = wr;
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ wqe = get_rwqe_ptr(&srq->rq, wq->head);
+ wqe->wr_id = wr->wr_id;
+ wqe->num_sge = wr->num_sge;
+ for (i = 0; i < wr->num_sge; i++)
+ wqe->sg_list[i] = wr->sg_list[i];
+ /* Make sure queue entry is written before the head index. */
+ smp_wmb();
+ wq->head = next;
+ spin_unlock_irqrestore(&srq->rq.lock, flags);
+ }
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_create_srq - create a shared receive queue
+ * @ibpd: the protection domain of the SRQ to create
+ * @srq_init_attr: the attributes of the SRQ
+ * @udata: data from libipathverbs when creating a user SRQ
+ */
+struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
+ struct ib_srq_init_attr *srq_init_attr,
+ struct ib_udata *udata)
+{
+ struct ipath_ibdev *dev = to_idev(ibpd->device);
+ struct ipath_srq *srq;
+ u32 sz;
+ struct ib_srq *ret;
+
+ if (srq_init_attr->srq_type != IB_SRQT_BASIC) {
+ ret = ERR_PTR(-ENOSYS);
+ goto done;
+ }
+
+ if (srq_init_attr->attr.max_wr == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto done;
+ }
+
+ if ((srq_init_attr->attr.max_sge > ib_ipath_max_srq_sges) ||
+ (srq_init_attr->attr.max_wr > ib_ipath_max_srq_wrs)) {
+ ret = ERR_PTR(-EINVAL);
+ goto done;
+ }
+
+ srq = kmalloc(sizeof(*srq), GFP_KERNEL);
+ if (!srq) {
+ ret = ERR_PTR(-ENOMEM);
+ goto done;
+ }
+
+ /*
+ * Need to use vmalloc() if we want to support large #s of entries.
+ */
+ srq->rq.size = srq_init_attr->attr.max_wr + 1;
+ srq->rq.max_sge = srq_init_attr->attr.max_sge;
+ sz = sizeof(struct ib_sge) * srq->rq.max_sge +
+ sizeof(struct ipath_rwqe);
+ srq->rq.wq = vmalloc_user(sizeof(struct ipath_rwq) + srq->rq.size * sz);
+ if (!srq->rq.wq) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_srq;
+ }
+
+ /*
+ * Return the address of the RWQ as the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->outlen >= sizeof(__u64)) {
+ int err;
+ u32 s = sizeof(struct ipath_rwq) + srq->rq.size * sz;
+
+ srq->ip =
+ ipath_create_mmap_info(dev, s,
+ ibpd->uobject->context,
+ srq->rq.wq);
+ if (!srq->ip) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_wq;
+ }
+
+ err = ib_copy_to_udata(udata, &srq->ip->offset,
+ sizeof(srq->ip->offset));
+ if (err) {
+ ret = ERR_PTR(err);
+ goto bail_ip;
+ }
+ } else
+ srq->ip = NULL;
+
+ /*
+ * ib_create_srq() will initialize srq->ibsrq.
+ */
+ spin_lock_init(&srq->rq.lock);
+ srq->rq.wq->head = 0;
+ srq->rq.wq->tail = 0;
+ srq->limit = srq_init_attr->attr.srq_limit;
+
+ spin_lock(&dev->n_srqs_lock);
+ if (dev->n_srqs_allocated == ib_ipath_max_srqs) {
+ spin_unlock(&dev->n_srqs_lock);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail_ip;
+ }
+
+ dev->n_srqs_allocated++;
+ spin_unlock(&dev->n_srqs_lock);
+
+ if (srq->ip) {
+ spin_lock_irq(&dev->pending_lock);
+ list_add(&srq->ip->pending_mmaps, &dev->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+ }
+
+ ret = &srq->ibsrq;
+ goto done;
+
+bail_ip:
+ kfree(srq->ip);
+bail_wq:
+ vfree(srq->rq.wq);
+bail_srq:
+ kfree(srq);
+done:
+ return ret;
+}
+
+/**
+ * ipath_modify_srq - modify a shared receive queue
+ * @ibsrq: the SRQ to modify
+ * @attr: the new attributes of the SRQ
+ * @attr_mask: indicates which attributes to modify
+ * @udata: user data for ipathverbs.so
+ */
+int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
+ enum ib_srq_attr_mask attr_mask,
+ struct ib_udata *udata)
+{
+ struct ipath_srq *srq = to_isrq(ibsrq);
+ struct ipath_rwq *wq;
+ int ret = 0;
+
+ if (attr_mask & IB_SRQ_MAX_WR) {
+ struct ipath_rwq *owq;
+ struct ipath_rwqe *p;
+ u32 sz, size, n, head, tail;
+
+ /* Check that the requested sizes are below the limits. */
+ if ((attr->max_wr > ib_ipath_max_srq_wrs) ||
+ ((attr_mask & IB_SRQ_LIMIT) ?
+ attr->srq_limit : srq->limit) > attr->max_wr) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ sz = sizeof(struct ipath_rwqe) +
+ srq->rq.max_sge * sizeof(struct ib_sge);
+ size = attr->max_wr + 1;
+ wq = vmalloc_user(sizeof(struct ipath_rwq) + size * sz);
+ if (!wq) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ /* Check that we can write the offset to mmap. */
+ if (udata && udata->inlen >= sizeof(__u64)) {
+ __u64 offset_addr;
+ __u64 offset = 0;
+
+ ret = ib_copy_from_udata(&offset_addr, udata,
+ sizeof(offset_addr));
+ if (ret)
+ goto bail_free;
+ udata->outbuf =
+ (void __user *) (unsigned long) offset_addr;
+ ret = ib_copy_to_udata(udata, &offset,
+ sizeof(offset));
+ if (ret)
+ goto bail_free;
+ }
+
+ spin_lock_irq(&srq->rq.lock);
+ /*
+ * validate head pointer value and compute
+ * the number of remaining WQEs.
+ */
+ owq = srq->rq.wq;
+ head = owq->head;
+ if (head >= srq->rq.size)
+ head = 0;
+ tail = owq->tail;
+ if (tail >= srq->rq.size)
+ tail = 0;
+ n = head;
+ if (n < tail)
+ n += srq->rq.size - tail;
+ else
+ n -= tail;
+ if (size <= n) {
+ ret = -EINVAL;
+ goto bail_unlock;
+ }
+ n = 0;
+ p = wq->wq;
+ while (tail != head) {
+ struct ipath_rwqe *wqe;
+ int i;
+
+ wqe = get_rwqe_ptr(&srq->rq, tail);
+ p->wr_id = wqe->wr_id;
+ p->num_sge = wqe->num_sge;
+ for (i = 0; i < wqe->num_sge; i++)
+ p->sg_list[i] = wqe->sg_list[i];
+ n++;
+ p = (struct ipath_rwqe *)((char *) p + sz);
+ if (++tail >= srq->rq.size)
+ tail = 0;
+ }
+ srq->rq.wq = wq;
+ srq->rq.size = size;
+ wq->head = n;
+ wq->tail = 0;
+ if (attr_mask & IB_SRQ_LIMIT)
+ srq->limit = attr->srq_limit;
+ spin_unlock_irq(&srq->rq.lock);
+
+ vfree(owq);
+
+ if (srq->ip) {
+ struct ipath_mmap_info *ip = srq->ip;
+ struct ipath_ibdev *dev = to_idev(srq->ibsrq.device);
+ u32 s = sizeof(struct ipath_rwq) + size * sz;
+
+ ipath_update_mmap_info(dev, ip, s, wq);
+
+ /*
+ * Return the offset to mmap.
+ * See ipath_mmap() for details.
+ */
+ if (udata && udata->inlen >= sizeof(__u64)) {
+ ret = ib_copy_to_udata(udata, &ip->offset,
+ sizeof(ip->offset));
+ if (ret)
+ goto bail;
+ }
+
+ spin_lock_irq(&dev->pending_lock);
+ if (list_empty(&ip->pending_mmaps))
+ list_add(&ip->pending_mmaps,
+ &dev->pending_mmaps);
+ spin_unlock_irq(&dev->pending_lock);
+ }
+ } else if (attr_mask & IB_SRQ_LIMIT) {
+ spin_lock_irq(&srq->rq.lock);
+ if (attr->srq_limit >= srq->rq.size)
+ ret = -EINVAL;
+ else
+ srq->limit = attr->srq_limit;
+ spin_unlock_irq(&srq->rq.lock);
+ }
+ goto bail;
+
+bail_unlock:
+ spin_unlock_irq(&srq->rq.lock);
+bail_free:
+ vfree(wq);
+bail:
+ return ret;
+}
+
+int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr)
+{
+ struct ipath_srq *srq = to_isrq(ibsrq);
+
+ attr->max_wr = srq->rq.size - 1;
+ attr->max_sge = srq->rq.max_sge;
+ attr->srq_limit = srq->limit;
+ return 0;
+}
+
+/**
+ * ipath_destroy_srq - destroy a shared receive queue
+ * @ibsrq: the SRQ to destroy
+ */
+int ipath_destroy_srq(struct ib_srq *ibsrq)
+{
+ struct ipath_srq *srq = to_isrq(ibsrq);
+ struct ipath_ibdev *dev = to_idev(ibsrq->device);
+
+ spin_lock(&dev->n_srqs_lock);
+ dev->n_srqs_allocated--;
+ spin_unlock(&dev->n_srqs_lock);
+ if (srq->ip)
+ kref_put(&srq->ip->ref, ipath_release_mmap_info);
+ else
+ vfree(srq->rq.wq);
+ kfree(srq);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "ipath_kernel.h"
+
+struct infinipath_stats ipath_stats;
+
+/**
+ * ipath_snap_cntr - snapshot a chip counter
+ * @dd: the infinipath device
+ * @creg: the counter to snapshot
+ *
+ * called from add_timer and user counter read calls, to deal with
+ * counters that wrap in "human time". The words sent and received, and
+ * the packets sent and received are all that we worry about. For now,
+ * at least, we don't worry about error counters, because if they wrap
+ * that quickly, we probably don't care. We may eventually just make this
+ * handle all the counters. word counters can wrap in about 20 seconds
+ * of full bandwidth traffic, packet counters in a few hours.
+ */
+
+u64 ipath_snap_cntr(struct ipath_devdata *dd, ipath_creg creg)
+{
+ u32 val, reg64 = 0;
+ u64 val64;
+ unsigned long t0, t1;
+ u64 ret;
+
+ t0 = jiffies;
+ /* If fast increment counters are only 32 bits, snapshot them,
+ * and maintain them as 64bit values in the driver */
+ if (!(dd->ipath_flags & IPATH_32BITCOUNTERS) &&
+ (creg == dd->ipath_cregs->cr_wordsendcnt ||
+ creg == dd->ipath_cregs->cr_wordrcvcnt ||
+ creg == dd->ipath_cregs->cr_pktsendcnt ||
+ creg == dd->ipath_cregs->cr_pktrcvcnt)) {
+ val64 = ipath_read_creg(dd, creg);
+ val = val64 == ~0ULL ? ~0U : 0;
+ reg64 = 1;
+ } else /* val64 just to keep gcc quiet... */
+ val64 = val = ipath_read_creg32(dd, creg);
+ /*
+ * See if a second has passed. This is just a way to detect things
+ * that are quite broken. Normally this should take just a few
+ * cycles (the check is for long enough that we don't care if we get
+ * pre-empted.) An Opteron HT O read timeout is 4 seconds with
+ * normal NB values
+ */
+ t1 = jiffies;
+ if (time_before(t0 + HZ, t1) && val == -1) {
+ ipath_dev_err(dd, "Error! Read counter 0x%x timed out\n",
+ creg);
+ ret = 0ULL;
+ goto bail;
+ }
+ if (reg64) {
+ ret = val64;
+ goto bail;
+ }
+
+ if (creg == dd->ipath_cregs->cr_wordsendcnt) {
+ if (val != dd->ipath_lastsword) {
+ dd->ipath_sword += val - dd->ipath_lastsword;
+ dd->ipath_lastsword = val;
+ }
+ val64 = dd->ipath_sword;
+ } else if (creg == dd->ipath_cregs->cr_wordrcvcnt) {
+ if (val != dd->ipath_lastrword) {
+ dd->ipath_rword += val - dd->ipath_lastrword;
+ dd->ipath_lastrword = val;
+ }
+ val64 = dd->ipath_rword;
+ } else if (creg == dd->ipath_cregs->cr_pktsendcnt) {
+ if (val != dd->ipath_lastspkts) {
+ dd->ipath_spkts += val - dd->ipath_lastspkts;
+ dd->ipath_lastspkts = val;
+ }
+ val64 = dd->ipath_spkts;
+ } else if (creg == dd->ipath_cregs->cr_pktrcvcnt) {
+ if (val != dd->ipath_lastrpkts) {
+ dd->ipath_rpkts += val - dd->ipath_lastrpkts;
+ dd->ipath_lastrpkts = val;
+ }
+ val64 = dd->ipath_rpkts;
+ } else if (creg == dd->ipath_cregs->cr_ibsymbolerrcnt) {
+ if (dd->ibdeltainprog)
+ val64 -= val64 - dd->ibsymsnap;
+ val64 -= dd->ibsymdelta;
+ } else if (creg == dd->ipath_cregs->cr_iblinkerrrecovcnt) {
+ if (dd->ibdeltainprog)
+ val64 -= val64 - dd->iblnkerrsnap;
+ val64 -= dd->iblnkerrdelta;
+ } else
+ val64 = (u64) val;
+
+ ret = val64;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_qcheck - print delta of egrfull/hdrqfull errors for kernel ports
+ * @dd: the infinipath device
+ *
+ * print the delta of egrfull/hdrqfull errors for kernel ports no more than
+ * every 5 seconds. User processes are printed at close, but kernel doesn't
+ * close, so... Separate routine so may call from other places someday, and
+ * so function name when printed by _IPATH_INFO is meaningfull
+ */
+static void ipath_qcheck(struct ipath_devdata *dd)
+{
+ static u64 last_tot_hdrqfull;
+ struct ipath_portdata *pd = dd->ipath_pd[0];
+ size_t blen = 0;
+ char buf[128];
+ u32 hdrqtail;
+
+ *buf = 0;
+ if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) {
+ blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
+ pd->port_hdrqfull -
+ dd->ipath_p0_hdrqfull);
+ dd->ipath_p0_hdrqfull = pd->port_hdrqfull;
+ }
+ if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
+ blen += snprintf(buf + blen, sizeof buf - blen,
+ "%srcvegrfull %llu",
+ blen ? ", " : "",
+ (unsigned long long)
+ (ipath_stats.sps_etidfull -
+ dd->ipath_last_tidfull));
+ dd->ipath_last_tidfull = ipath_stats.sps_etidfull;
+ }
+
+ /*
+ * this is actually the number of hdrq full interrupts, not actual
+ * events, but at the moment that's mostly what I'm interested in.
+ * Actual count, etc. is in the counters, if needed. For production
+ * users this won't ordinarily be printed.
+ */
+
+ if ((ipath_debug & (__IPATH_PKTDBG | __IPATH_DBG)) &&
+ ipath_stats.sps_hdrqfull != last_tot_hdrqfull) {
+ blen += snprintf(buf + blen, sizeof buf - blen,
+ "%shdrqfull %llu (all ports)",
+ blen ? ", " : "",
+ (unsigned long long)
+ (ipath_stats.sps_hdrqfull -
+ last_tot_hdrqfull));
+ last_tot_hdrqfull = ipath_stats.sps_hdrqfull;
+ }
+ if (blen)
+ ipath_dbg("%s\n", buf);
+
+ hdrqtail = ipath_get_hdrqtail(pd);
+ if (pd->port_head != hdrqtail) {
+ if (dd->ipath_lastport0rcv_cnt ==
+ ipath_stats.sps_port0pkts) {
+ ipath_cdbg(PKT, "missing rcv interrupts? "
+ "port0 hd=%x tl=%x; port0pkts %llx; write"
+ " hd (w/intr)\n",
+ pd->port_head, hdrqtail,
+ (unsigned long long)
+ ipath_stats.sps_port0pkts);
+ ipath_write_ureg(dd, ur_rcvhdrhead, hdrqtail |
+ dd->ipath_rhdrhead_intr_off, pd->port_port);
+ }
+ dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
+ }
+}
+
+static void ipath_chk_errormask(struct ipath_devdata *dd)
+{
+ static u32 fixed;
+ u32 ctrl;
+ unsigned long errormask;
+ unsigned long hwerrs;
+
+ if (!dd->ipath_errormask || !(dd->ipath_flags & IPATH_INITTED))
+ return;
+
+ errormask = ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
+
+ if (errormask == dd->ipath_errormask)
+ return;
+ fixed++;
+
+ hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
+ ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+
+ if ((hwerrs & dd->ipath_hwerrmask) ||
+ (ctrl & INFINIPATH_C_FREEZEMODE)) {
+ /* force re-interrupt of pending events, just in case */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, 0ULL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, 0ULL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
+ dev_info(&dd->pcidev->dev,
+ "errormask fixed(%u) %lx -> %lx, ctrl %x hwerr %lx\n",
+ fixed, errormask, (unsigned long)dd->ipath_errormask,
+ ctrl, hwerrs);
+ } else
+ ipath_dbg("errormask fixed(%u) %lx -> %lx, no freeze\n",
+ fixed, errormask,
+ (unsigned long)dd->ipath_errormask);
+}
+
+
+/**
+ * ipath_get_faststats - get word counters from chip before they overflow
+ * @opaque - contains a pointer to the infinipath device ipath_devdata
+ *
+ * called from add_timer
+ */
+void ipath_get_faststats(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+ int i;
+ static unsigned cnt;
+ unsigned long flags;
+ u64 traffic_wds;
+
+ /*
+ * don't access the chip while running diags, or memory diags can
+ * fail
+ */
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_INITTED) ||
+ ipath_diag_inuse)
+ /* but re-arm the timer, for diags case; won't hurt other */
+ goto done;
+
+ /*
+ * We now try to maintain a "active timer", based on traffic
+ * exceeding a threshold, so we need to check the word-counts
+ * even if they are 64-bit.
+ */
+ traffic_wds = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt) +
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
+ spin_lock_irqsave(&dd->ipath_eep_st_lock, flags);
+ traffic_wds -= dd->ipath_traffic_wds;
+ dd->ipath_traffic_wds += traffic_wds;
+ if (traffic_wds >= IPATH_TRAFFIC_ACTIVE_THRESHOLD)
+ atomic_add(5, &dd->ipath_active_time); /* S/B #define */
+ spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
+
+ if (dd->ipath_flags & IPATH_32BITCOUNTERS) {
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
+ ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
+ }
+
+ ipath_qcheck(dd);
+
+ /*
+ * deal with repeat error suppression. Doesn't really matter if
+ * last error was almost a full interval ago, or just a few usecs
+ * ago; still won't get more than 2 per interval. We may want
+ * longer intervals for this eventually, could do with mod, counter
+ * or separate timer. Also see code in ipath_handle_errors() and
+ * ipath_handle_hwerrors().
+ */
+
+ if (dd->ipath_lasterror)
+ dd->ipath_lasterror = 0;
+ if (dd->ipath_lasthwerror)
+ dd->ipath_lasthwerror = 0;
+ if (dd->ipath_maskederrs
+ && time_after(jiffies, dd->ipath_unmasktime)) {
+ char ebuf[256];
+ int iserr;
+ iserr = ipath_decode_err(dd, ebuf, sizeof ebuf,
+ dd->ipath_maskederrs);
+ if (dd->ipath_maskederrs &
+ ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_PKTERRS))
+ ipath_dev_err(dd, "Re-enabling masked errors "
+ "(%s)\n", ebuf);
+ else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal", for some
+ * types of processes (mostly benchmarks) that send
+ * huge numbers of messages, while not processing
+ * them. So only complain about these at debug
+ * level.
+ */
+ if (iserr)
+ ipath_dbg(
+ "Re-enabling queue full errors (%s)\n",
+ ebuf);
+ else
+ ipath_cdbg(ERRPKT, "Re-enabling packet"
+ " problem interrupt (%s)\n", ebuf);
+ }
+
+ /* re-enable masked errors */
+ dd->ipath_errormask |= dd->ipath_maskederrs;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
+ dd->ipath_errormask);
+ dd->ipath_maskederrs = 0;
+ }
+
+ /* limit qfull messages to ~one per minute per port */
+ if ((++cnt & 0x10)) {
+ for (i = (int) dd->ipath_cfgports; --i >= 0; ) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ if (pd && pd->port_lastrcvhdrqtail != -1)
+ pd->port_lastrcvhdrqtail = -1;
+ }
+ }
+
+ ipath_chk_errormask(dd);
+done:
+ mod_timer(&dd->ipath_stats_timer, jiffies + HZ * 5);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/ctype.h>
+#include <linux/stat.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+/**
+ * ipath_parse_ushort - parse an unsigned short value in an arbitrary base
+ * @str: the string containing the number
+ * @valp: where to put the result
+ *
+ * returns the number of bytes consumed, or negative value on error
+ */
+int ipath_parse_ushort(const char *str, unsigned short *valp)
+{
+ unsigned long val;
+ char *end;
+ int ret;
+
+ if (!isdigit(str[0])) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ val = simple_strtoul(str, &end, 0);
+
+ if (val > 0xffff) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ *valp = val;
+
+ ret = end + 1 - str;
+ if (ret == 0)
+ ret = -EINVAL;
+
+bail:
+ return ret;
+}
+
+static ssize_t show_version(struct device_driver *dev, char *buf)
+{
+ /* The string printed here is already newline-terminated. */
+ return scnprintf(buf, PAGE_SIZE, "%s", ib_ipath_version);
+}
+
+static ssize_t show_num_units(struct device_driver *dev, char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ ipath_count_units(NULL, NULL, NULL));
+}
+
+static ssize_t show_status(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ ssize_t ret;
+
+ if (!dd->ipath_statusp) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ ret = scnprintf(buf, PAGE_SIZE, "0x%llx\n",
+ (unsigned long long) *(dd->ipath_statusp));
+
+bail:
+ return ret;
+}
+
+static const char *ipath_status_str[] = {
+ "Initted",
+ "Disabled",
+ "Admin_Disabled",
+ "", /* This used to be the old "OIB_SMA" status. */
+ "", /* This used to be the old "SMA" status. */
+ "Present",
+ "IB_link_up",
+ "IB_configured",
+ "NoIBcable",
+ "Fatal_Hardware_Error",
+ NULL,
+};
+
+static ssize_t show_status_str(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int i, any;
+ u64 s;
+ ssize_t ret;
+
+ if (!dd->ipath_statusp) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ s = *(dd->ipath_statusp);
+ *buf = '\0';
+ for (any = i = 0; s && ipath_status_str[i]; i++) {
+ if (s & 1) {
+ if (any && strlcat(buf, " ", PAGE_SIZE) >=
+ PAGE_SIZE)
+ /* overflow */
+ break;
+ if (strlcat(buf, ipath_status_str[i],
+ PAGE_SIZE) >= PAGE_SIZE)
+ break;
+ any = 1;
+ }
+ s >>= 1;
+ }
+ if (any)
+ strlcat(buf, "\n", PAGE_SIZE);
+
+ ret = strlen(buf);
+
+bail:
+ return ret;
+}
+
+static ssize_t show_boardversion(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ /* The string printed here is already newline-terminated. */
+ return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_boardversion);
+}
+
+static ssize_t show_localbus_info(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ /* The string printed here is already newline-terminated. */
+ return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_lbus_info);
+}
+
+static ssize_t show_lmc(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_lmc);
+}
+
+static ssize_t store_lmc(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u16 lmc = 0;
+ int ret;
+
+ ret = ipath_parse_ushort(buf, &lmc);
+ if (ret < 0)
+ goto invalid;
+
+ if (lmc > 7) {
+ ret = -EINVAL;
+ goto invalid;
+ }
+
+ ipath_set_lid(dd, dd->ipath_lid, lmc);
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid LMC %u\n", lmc);
+bail:
+ return ret;
+}
+
+static ssize_t show_lid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_lid);
+}
+
+static ssize_t store_lid(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u16 lid = 0;
+ int ret;
+
+ ret = ipath_parse_ushort(buf, &lid);
+ if (ret < 0)
+ goto invalid;
+
+ if (lid == 0 || lid >= IPATH_MULTICAST_LID_BASE) {
+ ret = -EINVAL;
+ goto invalid;
+ }
+
+ ipath_set_lid(dd, lid, dd->ipath_lmc);
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid LID 0x%x\n", lid);
+bail:
+ return ret;
+}
+
+static ssize_t show_mlid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "0x%x\n", dd->ipath_mlid);
+}
+
+static ssize_t store_mlid(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u16 mlid;
+ int ret;
+
+ ret = ipath_parse_ushort(buf, &mlid);
+ if (ret < 0 || mlid < IPATH_MULTICAST_LID_BASE)
+ goto invalid;
+
+ dd->ipath_mlid = mlid;
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid MLID\n");
+bail:
+ return ret;
+}
+
+static ssize_t show_guid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u8 *guid;
+
+ guid = (u8 *) & (dd->ipath_guid);
+
+ return scnprintf(buf, PAGE_SIZE,
+ "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ guid[0], guid[1], guid[2], guid[3],
+ guid[4], guid[5], guid[6], guid[7]);
+}
+
+static ssize_t store_guid(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ ssize_t ret;
+ unsigned short guid[8];
+ __be64 new_guid;
+ u8 *ng;
+ int i;
+
+ if (sscanf(buf, "%hx:%hx:%hx:%hx:%hx:%hx:%hx:%hx",
+ &guid[0], &guid[1], &guid[2], &guid[3],
+ &guid[4], &guid[5], &guid[6], &guid[7]) != 8)
+ goto invalid;
+
+ ng = (u8 *) &new_guid;
+
+ for (i = 0; i < 8; i++) {
+ if (guid[i] > 0xff)
+ goto invalid;
+ ng[i] = guid[i];
+ }
+
+ if (new_guid == 0)
+ goto invalid;
+
+ dd->ipath_guid = new_guid;
+ dd->ipath_nguid = 1;
+ if (dd->verbs_dev)
+ dd->verbs_dev->ibdev.node_guid = new_guid;
+
+ ret = strlen(buf);
+ goto bail;
+
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid GUID\n");
+ ret = -EINVAL;
+
+bail:
+ return ret;
+}
+
+static ssize_t show_nguid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_nguid);
+}
+
+static ssize_t show_nports(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ /* Return the number of user ports available. */
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_cfgports - 1);
+}
+
+static ssize_t show_serial(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ buf[sizeof dd->ipath_serial] = '\0';
+ memcpy(buf, dd->ipath_serial, sizeof dd->ipath_serial);
+ strcat(buf, "\n");
+ return strlen(buf);
+}
+
+static ssize_t show_unit(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_unit);
+}
+
+static ssize_t show_jint_max_packets(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_max_packets);
+}
+
+static ssize_t store_jint_max_packets(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u16 v = 0;
+ int ret;
+
+ ret = ipath_parse_ushort(buf, &v);
+ if (ret < 0)
+ ipath_dev_err(dd, "invalid jint_max_packets.\n");
+ else
+ dd->ipath_f_config_jint(dd, dd->ipath_jint_idle_ticks, v);
+
+ return ret;
+}
+
+static ssize_t show_jint_idle_ticks(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_idle_ticks);
+}
+
+static ssize_t store_jint_idle_ticks(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ u16 v = 0;
+ int ret;
+
+ ret = ipath_parse_ushort(buf, &v);
+ if (ret < 0)
+ ipath_dev_err(dd, "invalid jint_idle_ticks.\n");
+ else
+ dd->ipath_f_config_jint(dd, v, dd->ipath_jint_max_packets);
+
+ return ret;
+}
+
+#define DEVICE_COUNTER(name, attr) \
+ static ssize_t show_counter_##name(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+ { \
+ struct ipath_devdata *dd = dev_get_drvdata(dev); \
+ return scnprintf(\
+ buf, PAGE_SIZE, "%llu\n", (unsigned long long) \
+ ipath_snap_cntr( \
+ dd, offsetof(struct infinipath_counters, \
+ attr) / sizeof(u64))); \
+ } \
+ static DEVICE_ATTR(name, S_IRUGO, show_counter_##name, NULL);
+
+DEVICE_COUNTER(ib_link_downeds, IBLinkDownedCnt);
+DEVICE_COUNTER(ib_link_err_recoveries, IBLinkErrRecoveryCnt);
+DEVICE_COUNTER(ib_status_changes, IBStatusChangeCnt);
+DEVICE_COUNTER(ib_symbol_errs, IBSymbolErrCnt);
+DEVICE_COUNTER(lb_flow_stalls, LBFlowStallCnt);
+DEVICE_COUNTER(lb_ints, LBIntCnt);
+DEVICE_COUNTER(rx_bad_formats, RxBadFormatCnt);
+DEVICE_COUNTER(rx_buf_ovfls, RxBufOvflCnt);
+DEVICE_COUNTER(rx_data_pkts, RxDataPktCnt);
+DEVICE_COUNTER(rx_dropped_pkts, RxDroppedPktCnt);
+DEVICE_COUNTER(rx_dwords, RxDwordCnt);
+DEVICE_COUNTER(rx_ebps, RxEBPCnt);
+DEVICE_COUNTER(rx_flow_ctrl_errs, RxFlowCtrlErrCnt);
+DEVICE_COUNTER(rx_flow_pkts, RxFlowPktCnt);
+DEVICE_COUNTER(rx_icrc_errs, RxICRCErrCnt);
+DEVICE_COUNTER(rx_len_errs, RxLenErrCnt);
+DEVICE_COUNTER(rx_link_problems, RxLinkProblemCnt);
+DEVICE_COUNTER(rx_lpcrc_errs, RxLPCRCErrCnt);
+DEVICE_COUNTER(rx_max_min_len_errs, RxMaxMinLenErrCnt);
+DEVICE_COUNTER(rx_p0_hdr_egr_ovfls, RxP0HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p1_hdr_egr_ovfls, RxP1HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p2_hdr_egr_ovfls, RxP2HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p3_hdr_egr_ovfls, RxP3HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p4_hdr_egr_ovfls, RxP4HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p5_hdr_egr_ovfls, RxP5HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p6_hdr_egr_ovfls, RxP6HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p7_hdr_egr_ovfls, RxP7HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_p8_hdr_egr_ovfls, RxP8HdrEgrOvflCnt);
+DEVICE_COUNTER(rx_pkey_mismatches, RxPKeyMismatchCnt);
+DEVICE_COUNTER(rx_tid_full_errs, RxTIDFullErrCnt);
+DEVICE_COUNTER(rx_tid_valid_errs, RxTIDValidErrCnt);
+DEVICE_COUNTER(rx_vcrc_errs, RxVCRCErrCnt);
+DEVICE_COUNTER(tx_data_pkts, TxDataPktCnt);
+DEVICE_COUNTER(tx_dropped_pkts, TxDroppedPktCnt);
+DEVICE_COUNTER(tx_dwords, TxDwordCnt);
+DEVICE_COUNTER(tx_flow_pkts, TxFlowPktCnt);
+DEVICE_COUNTER(tx_flow_stalls, TxFlowStallCnt);
+DEVICE_COUNTER(tx_len_errs, TxLenErrCnt);
+DEVICE_COUNTER(tx_max_min_len_errs, TxMaxMinLenErrCnt);
+DEVICE_COUNTER(tx_underruns, TxUnderrunCnt);
+DEVICE_COUNTER(tx_unsup_vl_errs, TxUnsupVLErrCnt);
+
+static struct attribute *dev_counter_attributes[] = {
+ &dev_attr_ib_link_downeds.attr,
+ &dev_attr_ib_link_err_recoveries.attr,
+ &dev_attr_ib_status_changes.attr,
+ &dev_attr_ib_symbol_errs.attr,
+ &dev_attr_lb_flow_stalls.attr,
+ &dev_attr_lb_ints.attr,
+ &dev_attr_rx_bad_formats.attr,
+ &dev_attr_rx_buf_ovfls.attr,
+ &dev_attr_rx_data_pkts.attr,
+ &dev_attr_rx_dropped_pkts.attr,
+ &dev_attr_rx_dwords.attr,
+ &dev_attr_rx_ebps.attr,
+ &dev_attr_rx_flow_ctrl_errs.attr,
+ &dev_attr_rx_flow_pkts.attr,
+ &dev_attr_rx_icrc_errs.attr,
+ &dev_attr_rx_len_errs.attr,
+ &dev_attr_rx_link_problems.attr,
+ &dev_attr_rx_lpcrc_errs.attr,
+ &dev_attr_rx_max_min_len_errs.attr,
+ &dev_attr_rx_p0_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p1_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p2_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p3_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p4_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p5_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p6_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p7_hdr_egr_ovfls.attr,
+ &dev_attr_rx_p8_hdr_egr_ovfls.attr,
+ &dev_attr_rx_pkey_mismatches.attr,
+ &dev_attr_rx_tid_full_errs.attr,
+ &dev_attr_rx_tid_valid_errs.attr,
+ &dev_attr_rx_vcrc_errs.attr,
+ &dev_attr_tx_data_pkts.attr,
+ &dev_attr_tx_dropped_pkts.attr,
+ &dev_attr_tx_dwords.attr,
+ &dev_attr_tx_flow_pkts.attr,
+ &dev_attr_tx_flow_stalls.attr,
+ &dev_attr_tx_len_errs.attr,
+ &dev_attr_tx_max_min_len_errs.attr,
+ &dev_attr_tx_underruns.attr,
+ &dev_attr_tx_unsup_vl_errs.attr,
+ NULL
+};
+
+static struct attribute_group dev_counter_attr_group = {
+ .name = "counters",
+ .attrs = dev_counter_attributes
+};
+
+static ssize_t store_reset(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ if (count < 5 || memcmp(buf, "reset", 5)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ if (dd->ipath_flags & IPATH_DISABLED) {
+ /*
+ * post-reset init would re-enable interrupts, etc.
+ * so don't allow reset on disabled devices. Not
+ * perfect error, but about the best choice.
+ */
+ dev_info(dev,"Unit %d is disabled, can't reset\n",
+ dd->ipath_unit);
+ ret = -EINVAL;
+ goto bail;
+ }
+ ret = ipath_reset_device(dd->ipath_unit);
+bail:
+ return ret<0 ? ret : count;
+}
+
+static ssize_t store_link_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 state;
+
+ ret = ipath_parse_ushort(buf, &state);
+ if (ret < 0)
+ goto invalid;
+
+ r = ipath_set_linkstate(dd, state);
+ if (r < 0) {
+ ret = r;
+ goto bail;
+ }
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid link state\n");
+bail:
+ return ret;
+}
+
+static ssize_t show_mtu(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_ibmtu);
+}
+
+static ssize_t store_mtu(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ ssize_t ret;
+ u16 mtu = 0;
+ int r;
+
+ ret = ipath_parse_ushort(buf, &mtu);
+ if (ret < 0)
+ goto invalid;
+
+ r = ipath_set_mtu(dd, mtu);
+ if (r < 0)
+ ret = r;
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid MTU\n");
+bail:
+ return ret;
+}
+
+static ssize_t show_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ (dd->ipath_flags & IPATH_DISABLED) ? 0 : 1);
+}
+
+static ssize_t store_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ ssize_t ret;
+ u16 enable = 0;
+
+ ret = ipath_parse_ushort(buf, &enable);
+ if (ret < 0) {
+ ipath_dev_err(dd, "attempt to use non-numeric on enable\n");
+ goto bail;
+ }
+
+ if (enable) {
+ if (!(dd->ipath_flags & IPATH_DISABLED))
+ goto bail;
+
+ dev_info(dev, "Enabling unit %d\n", dd->ipath_unit);
+ /* same as post-reset */
+ ret = ipath_init_chip(dd, 1);
+ if (ret)
+ ipath_dev_err(dd, "Failed to enable unit %d\n",
+ dd->ipath_unit);
+ else {
+ dd->ipath_flags &= ~IPATH_DISABLED;
+ *dd->ipath_statusp &= ~IPATH_STATUS_ADMIN_DISABLED;
+ }
+ }
+ else if (!(dd->ipath_flags & IPATH_DISABLED)) {
+ dev_info(dev, "Disabling unit %d\n", dd->ipath_unit);
+ ipath_shutdown_device(dd);
+ dd->ipath_flags |= IPATH_DISABLED;
+ *dd->ipath_statusp |= IPATH_STATUS_ADMIN_DISABLED;
+ }
+
+bail:
+ return ret;
+}
+
+static ssize_t store_rx_pol_inv(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret < 0)
+ goto invalid;
+
+ r = ipath_set_rx_pol_inv(dd, val);
+ if (r < 0) {
+ ret = r;
+ goto bail;
+ }
+
+ goto bail;
+invalid:
+ ipath_dev_err(dd, "attempt to set invalid Rx Polarity invert\n");
+bail:
+ return ret;
+}
+
+static ssize_t store_led_override(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret > 0)
+ ipath_set_led_override(dd, val);
+ else
+ ipath_dev_err(dd, "attempt to set invalid LED override\n");
+ return ret;
+}
+
+static ssize_t show_logged_errs(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int idx, count;
+
+ /* force consistency with actual EEPROM */
+ if (ipath_update_eeprom_log(dd) != 0)
+ return -ENXIO;
+
+ count = 0;
+ for (idx = 0; idx < IPATH_EEP_LOG_CNT; ++idx) {
+ count += scnprintf(buf + count, PAGE_SIZE - count, "%d%c",
+ dd->ipath_eep_st_errs[idx],
+ idx == (IPATH_EEP_LOG_CNT - 1) ? '\n' : ' ');
+ }
+
+ return count;
+}
+
+/*
+ * New sysfs entries to control various IB config. These all turn into
+ * accesses via ipath_f_get/set_ib_cfg.
+ *
+ * Get/Set heartbeat enable. Or of 1=enabled, 2=auto
+ */
+static ssize_t show_hrtbt_enb(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_HRTBT);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+static ssize_t store_hrtbt_enb(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret >= 0 && val > 3)
+ ret = -EINVAL;
+ if (ret < 0) {
+ ipath_dev_err(dd, "attempt to set invalid Heartbeat enable\n");
+ goto bail;
+ }
+
+ /*
+ * Set the "intentional" heartbeat enable per either of
+ * "Enable" and "Auto", as these are normally set together.
+ * This bit is consulted when leaving loopback mode,
+ * because entering loopback mode overrides it and automatically
+ * disables heartbeat.
+ */
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, val);
+ if (r < 0)
+ ret = r;
+ else if (val == IPATH_IB_HRTBT_OFF)
+ dd->ipath_flags |= IPATH_NO_HRTBT;
+ else
+ dd->ipath_flags &= ~IPATH_NO_HRTBT;
+
+bail:
+ return ret;
+}
+
+/*
+ * Get/Set Link-widths enabled. Or of 1=1x, 2=4x (this is human/IB centric,
+ * _not_ the particular encoding of any given chip)
+ */
+static ssize_t show_lwid_enb(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+static ssize_t store_lwid_enb(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret >= 0 && (val == 0 || val > 3))
+ ret = -EINVAL;
+ if (ret < 0) {
+ ipath_dev_err(dd,
+ "attempt to set invalid Link Width (enable)\n");
+ goto bail;
+ }
+
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, val);
+ if (r < 0)
+ ret = r;
+
+bail:
+ return ret;
+}
+
+/* Get current link width */
+static ssize_t show_lwid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+/*
+ * Get/Set Link-speeds enabled. Or of 1=SDR 2=DDR.
+ */
+static ssize_t show_spd_enb(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+static ssize_t store_spd_enb(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret >= 0 && (val == 0 || val > (IPATH_IB_SDR | IPATH_IB_DDR)))
+ ret = -EINVAL;
+ if (ret < 0) {
+ ipath_dev_err(dd,
+ "attempt to set invalid Link Speed (enable)\n");
+ goto bail;
+ }
+
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, val);
+ if (r < 0)
+ ret = r;
+
+bail:
+ return ret;
+}
+
+/* Get current link speed */
+static ssize_t show_spd(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+/*
+ * Get/Set RX polarity-invert enable. 0=no, 1=yes.
+ */
+static ssize_t show_rx_polinv_enb(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+static ssize_t store_rx_polinv_enb(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret >= 0 && val > 1) {
+ ipath_dev_err(dd,
+ "attempt to set invalid Rx Polarity (enable)\n");
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val);
+ if (r < 0)
+ ret = r;
+
+bail:
+ return ret;
+}
+
+/*
+ * Get/Set RX lane-reversal enable. 0=no, 1=yes.
+ */
+static ssize_t show_lanerev_enb(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+
+ ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB);
+ if (ret >= 0)
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+ return ret;
+}
+
+static ssize_t store_lanerev_enb(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, r;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret >= 0 && val > 1) {
+ ret = -EINVAL;
+ ipath_dev_err(dd,
+ "attempt to set invalid Lane reversal (enable)\n");
+ goto bail;
+ }
+
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB, val);
+ if (r < 0)
+ ret = r;
+
+bail:
+ return ret;
+}
+
+static DRIVER_ATTR(num_units, S_IRUGO, show_num_units, NULL);
+static DRIVER_ATTR(version, S_IRUGO, show_version, NULL);
+
+static struct attribute *driver_attributes[] = {
+ &driver_attr_num_units.attr,
+ &driver_attr_version.attr,
+ NULL
+};
+
+static struct attribute_group driver_attr_group = {
+ .attrs = driver_attributes
+};
+
+static ssize_t store_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, stat;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret <= 0) {
+ ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
+ goto bail;
+ }
+ /* If anything but the highest limit, enable T_CRIT_A "interrupt" */
+ stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set tempsense config\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set local Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set remote Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+
+bail:
+ return ret;
+}
+
+/*
+ * dump tempsense regs. in decimal, to ease shell-scripts.
+ */
+static ssize_t show_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+ int idx;
+ u8 regvals[8];
+
+ ret = -ENXIO;
+ for (idx = 0; idx < 8; ++idx) {
+ if (idx == 6)
+ continue;
+ ret = ipath_tempsense_read(dd, idx);
+ if (ret < 0)
+ break;
+ regvals[idx] = ret;
+ }
+ if (idx == 8)
+ ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
+ *(signed char *)(regvals),
+ *(signed char *)(regvals + 1),
+ regvals[2], regvals[3],
+ *(signed char *)(regvals + 5),
+ *(signed char *)(regvals + 7));
+ return ret;
+}
+
+const struct attribute_group *ipath_driver_attr_groups[] = {
+ &driver_attr_group,
+ NULL,
+};
+
+static DEVICE_ATTR(guid, S_IWUSR | S_IRUGO, show_guid, store_guid);
+static DEVICE_ATTR(lmc, S_IWUSR | S_IRUGO, show_lmc, store_lmc);
+static DEVICE_ATTR(lid, S_IWUSR | S_IRUGO, show_lid, store_lid);
+static DEVICE_ATTR(link_state, S_IWUSR, NULL, store_link_state);
+static DEVICE_ATTR(mlid, S_IWUSR | S_IRUGO, show_mlid, store_mlid);
+static DEVICE_ATTR(mtu, S_IWUSR | S_IRUGO, show_mtu, store_mtu);
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO, show_enabled, store_enabled);
+static DEVICE_ATTR(nguid, S_IRUGO, show_nguid, NULL);
+static DEVICE_ATTR(nports, S_IRUGO, show_nports, NULL);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, store_reset);
+static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+static DEVICE_ATTR(status_str, S_IRUGO, show_status_str, NULL);
+static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL);
+static DEVICE_ATTR(unit, S_IRUGO, show_unit, NULL);
+static DEVICE_ATTR(rx_pol_inv, S_IWUSR, NULL, store_rx_pol_inv);
+static DEVICE_ATTR(led_override, S_IWUSR, NULL, store_led_override);
+static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
+static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
+static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
+ show_jint_max_packets, store_jint_max_packets);
+static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
+ show_jint_idle_ticks, store_jint_idle_ticks);
+static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
+ show_tempsense, store_tempsense);
+
+static struct attribute *dev_attributes[] = {
+ &dev_attr_guid.attr,
+ &dev_attr_lmc.attr,
+ &dev_attr_lid.attr,
+ &dev_attr_link_state.attr,
+ &dev_attr_mlid.attr,
+ &dev_attr_mtu.attr,
+ &dev_attr_nguid.attr,
+ &dev_attr_nports.attr,
+ &dev_attr_serial.attr,
+ &dev_attr_status.attr,
+ &dev_attr_status_str.attr,
+ &dev_attr_boardversion.attr,
+ &dev_attr_unit.attr,
+ &dev_attr_enabled.attr,
+ &dev_attr_rx_pol_inv.attr,
+ &dev_attr_led_override.attr,
+ &dev_attr_logged_errors.attr,
+ &dev_attr_tempsense.attr,
+ &dev_attr_localbus_info.attr,
+ NULL
+};
+
+static struct attribute_group dev_attr_group = {
+ .attrs = dev_attributes
+};
+
+static DEVICE_ATTR(hrtbt_enable, S_IWUSR | S_IRUGO, show_hrtbt_enb,
+ store_hrtbt_enb);
+static DEVICE_ATTR(link_width_enable, S_IWUSR | S_IRUGO, show_lwid_enb,
+ store_lwid_enb);
+static DEVICE_ATTR(link_width, S_IRUGO, show_lwid, NULL);
+static DEVICE_ATTR(link_speed_enable, S_IWUSR | S_IRUGO, show_spd_enb,
+ store_spd_enb);
+static DEVICE_ATTR(link_speed, S_IRUGO, show_spd, NULL);
+static DEVICE_ATTR(rx_pol_inv_enable, S_IWUSR | S_IRUGO, show_rx_polinv_enb,
+ store_rx_polinv_enb);
+static DEVICE_ATTR(rx_lane_rev_enable, S_IWUSR | S_IRUGO, show_lanerev_enb,
+ store_lanerev_enb);
+
+static struct attribute *dev_ibcfg_attributes[] = {
+ &dev_attr_hrtbt_enable.attr,
+ &dev_attr_link_width_enable.attr,
+ &dev_attr_link_width.attr,
+ &dev_attr_link_speed_enable.attr,
+ &dev_attr_link_speed.attr,
+ &dev_attr_rx_pol_inv_enable.attr,
+ &dev_attr_rx_lane_rev_enable.attr,
+ NULL
+};
+
+static struct attribute_group dev_ibcfg_attr_group = {
+ .attrs = dev_ibcfg_attributes
+};
+
+/**
+ * ipath_expose_reset - create a device reset file
+ * @dev: the device structure
+ *
+ * Only expose a file that lets us reset the device after someone
+ * enters diag mode. A device reset is quite likely to crash the
+ * machine entirely, so we don't want to normally make it
+ * available.
+ *
+ * Called with ipath_mutex held.
+ */
+int ipath_expose_reset(struct device *dev)
+{
+ static int exposed;
+ int ret;
+
+ if (!exposed) {
+ ret = device_create_file(dev, &dev_attr_reset);
+ exposed = 1;
+ }
+ else
+ ret = 0;
+
+ return ret;
+}
+
+int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd)
+{
+ int ret;
+
+ ret = sysfs_create_group(&dev->kobj, &dev_attr_group);
+ if (ret)
+ goto bail;
+
+ ret = sysfs_create_group(&dev->kobj, &dev_counter_attr_group);
+ if (ret)
+ goto bail_attrs;
+
+ if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
+ ret = device_create_file(dev, &dev_attr_jint_idle_ticks);
+ if (ret)
+ goto bail_counter;
+ ret = device_create_file(dev, &dev_attr_jint_max_packets);
+ if (ret)
+ goto bail_idle;
+
+ ret = sysfs_create_group(&dev->kobj, &dev_ibcfg_attr_group);
+ if (ret)
+ goto bail_max;
+ }
+
+ return 0;
+
+bail_max:
+ device_remove_file(dev, &dev_attr_jint_max_packets);
+bail_idle:
+ device_remove_file(dev, &dev_attr_jint_idle_ticks);
+bail_counter:
+ sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
+bail_attrs:
+ sysfs_remove_group(&dev->kobj, &dev_attr_group);
+bail:
+ return ret;
+}
+
+void ipath_device_remove_group(struct device *dev, struct ipath_devdata *dd)
+{
+ sysfs_remove_group(&dev->kobj, &dev_counter_attr_group);
+
+ if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) {
+ sysfs_remove_group(&dev->kobj, &dev_ibcfg_attr_group);
+ device_remove_file(dev, &dev_attr_jint_idle_ticks);
+ device_remove_file(dev, &dev_attr_jint_max_packets);
+ }
+
+ sysfs_remove_group(&dev->kobj, &dev_attr_group);
+
+ device_remove_file(dev, &dev_attr_reset);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+/* cut down ridiculously long IB macro names */
+#define OP(x) IB_OPCODE_UC_##x
+
+/**
+ * ipath_make_uc_req - construct a request packet (SEND, RDMA write)
+ * @qp: a pointer to the QP
+ *
+ * Return 1 if constructed; otherwise, return 0.
+ */
+int ipath_make_uc_req(struct ipath_qp *qp)
+{
+ struct ipath_other_headers *ohdr;
+ struct ipath_swqe *wqe;
+ unsigned long flags;
+ u32 hwords;
+ u32 bth0;
+ u32 len;
+ u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ int ret = 0;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+ goto done;
+ }
+
+ ohdr = &qp->s_hdr.u.oth;
+ if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
+ ohdr = &qp->s_hdr.u.l.oth;
+
+ /* header size in 32-bit words LRH+BTH = (8+12)/4. */
+ hwords = 5;
+ bth0 = 1 << 22; /* Set M bit */
+
+ /* Get the next send request. */
+ wqe = get_swqe_ptr(qp, qp->s_cur);
+ qp->s_wqe = NULL;
+ switch (qp->s_state) {
+ default:
+ if (!(ib_ipath_state_ops[qp->state] &
+ IPATH_PROCESS_NEXT_SEND_OK))
+ goto bail;
+ /* Check if send work queue is empty. */
+ if (qp->s_cur == qp->s_head)
+ goto bail;
+ /*
+ * Start a new request.
+ */
+ qp->s_psn = wqe->psn = qp->s_next_psn;
+ qp->s_sge.sge = wqe->sg_list[0];
+ qp->s_sge.sg_list = wqe->sg_list + 1;
+ qp->s_sge.num_sge = wqe->wr.num_sge;
+ qp->s_len = len = wqe->length;
+ switch (wqe->wr.opcode) {
+ case IB_WR_SEND:
+ case IB_WR_SEND_WITH_IMM:
+ if (len > pmtu) {
+ qp->s_state = OP(SEND_FIRST);
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_SEND)
+ qp->s_state = OP(SEND_ONLY);
+ else {
+ qp->s_state =
+ OP(SEND_ONLY_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ }
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ qp->s_wqe = wqe;
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case IB_WR_RDMA_WRITE:
+ case IB_WR_RDMA_WRITE_WITH_IMM:
+ ohdr->u.rc.reth.vaddr =
+ cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
+ ohdr->u.rc.reth.rkey =
+ cpu_to_be32(wqe->wr.wr.rdma.rkey);
+ ohdr->u.rc.reth.length = cpu_to_be32(len);
+ hwords += sizeof(struct ib_reth) / 4;
+ if (len > pmtu) {
+ qp->s_state = OP(RDMA_WRITE_FIRST);
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
+ qp->s_state = OP(RDMA_WRITE_ONLY);
+ else {
+ qp->s_state =
+ OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
+ /* Immediate data comes after the RETH */
+ ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ }
+ qp->s_wqe = wqe;
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ default:
+ goto bail;
+ }
+ break;
+
+ case OP(SEND_FIRST):
+ qp->s_state = OP(SEND_MIDDLE);
+ /* FALLTHROUGH */
+ case OP(SEND_MIDDLE):
+ len = qp->s_len;
+ if (len > pmtu) {
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_SEND)
+ qp->s_state = OP(SEND_LAST);
+ else {
+ qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ }
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ qp->s_wqe = wqe;
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+
+ case OP(RDMA_WRITE_FIRST):
+ qp->s_state = OP(RDMA_WRITE_MIDDLE);
+ /* FALLTHROUGH */
+ case OP(RDMA_WRITE_MIDDLE):
+ len = qp->s_len;
+ if (len > pmtu) {
+ len = pmtu;
+ break;
+ }
+ if (wqe->wr.opcode == IB_WR_RDMA_WRITE)
+ qp->s_state = OP(RDMA_WRITE_LAST);
+ else {
+ qp->s_state =
+ OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
+ /* Immediate data comes after the BTH */
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
+ hwords += 1;
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ }
+ qp->s_wqe = wqe;
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
+ break;
+ }
+ qp->s_len -= len;
+ qp->s_hdrwords = hwords;
+ qp->s_cur_sge = &qp->s_sge;
+ qp->s_cur_size = len;
+ ipath_make_ruc_header(to_idev(qp->ibqp.device),
+ qp, ohdr, bth0 | (qp->s_state << 24),
+ qp->s_next_psn++ & IPATH_PSN_MASK);
+done:
+ ret = 1;
+ goto unlock;
+
+bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ return ret;
+}
+
+/**
+ * ipath_uc_rcv - handle an incoming UC packet
+ * @dev: the device the packet came in on
+ * @hdr: the header of the packet
+ * @has_grh: true if the packet has a GRH
+ * @data: the packet data
+ * @tlen: the length of the packet
+ * @qp: the QP for this packet.
+ *
+ * This is called from ipath_qp_rcv() to process an incoming UC packet
+ * for the given QP.
+ * Called at interrupt level.
+ */
+void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
+{
+ struct ipath_other_headers *ohdr;
+ int opcode;
+ u32 hdrsize;
+ u32 psn;
+ u32 pad;
+ struct ib_wc wc;
+ u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
+ struct ib_reth *reth;
+ int header_in_data;
+
+ /* Validate the SLID. See Ch. 9.6.1.5 */
+ if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
+ goto done;
+
+ /* Check for GRH */
+ if (!has_grh) {
+ ohdr = &hdr->u.oth;
+ hdrsize = 8 + 12; /* LRH + BTH */
+ psn = be32_to_cpu(ohdr->bth[2]);
+ header_in_data = 0;
+ } else {
+ ohdr = &hdr->u.l.oth;
+ hdrsize = 8 + 40 + 12; /* LRH + GRH + BTH */
+ /*
+ * The header with GRH is 60 bytes and the
+ * core driver sets the eager header buffer
+ * size to 56 bytes so the last 4 bytes of
+ * the BTH header (PSN) is in the data buffer.
+ */
+ header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
+ if (header_in_data) {
+ psn = be32_to_cpu(((__be32 *) data)[0]);
+ data += sizeof(__be32);
+ } else
+ psn = be32_to_cpu(ohdr->bth[2]);
+ }
+ /*
+ * The opcode is in the low byte when its in network order
+ * (top byte when in host order).
+ */
+ opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+
+ memset(&wc, 0, sizeof wc);
+
+ /* Compare the PSN verses the expected PSN. */
+ if (unlikely(ipath_cmp24(psn, qp->r_psn) != 0)) {
+ /*
+ * Handle a sequence error.
+ * Silently drop any current message.
+ */
+ qp->r_psn = psn;
+ inv:
+ qp->r_state = OP(SEND_LAST);
+ switch (opcode) {
+ case OP(SEND_FIRST):
+ case OP(SEND_ONLY):
+ case OP(SEND_ONLY_WITH_IMMEDIATE):
+ goto send_first;
+
+ case OP(RDMA_WRITE_FIRST):
+ case OP(RDMA_WRITE_ONLY):
+ case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE):
+ goto rdma_first;
+
+ default:
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ }
+
+ /* Check for opcode sequence errors. */
+ switch (qp->r_state) {
+ case OP(SEND_FIRST):
+ case OP(SEND_MIDDLE):
+ if (opcode == OP(SEND_MIDDLE) ||
+ opcode == OP(SEND_LAST) ||
+ opcode == OP(SEND_LAST_WITH_IMMEDIATE))
+ break;
+ goto inv;
+
+ case OP(RDMA_WRITE_FIRST):
+ case OP(RDMA_WRITE_MIDDLE):
+ if (opcode == OP(RDMA_WRITE_MIDDLE) ||
+ opcode == OP(RDMA_WRITE_LAST) ||
+ opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE))
+ break;
+ goto inv;
+
+ default:
+ if (opcode == OP(SEND_FIRST) ||
+ opcode == OP(SEND_ONLY) ||
+ opcode == OP(SEND_ONLY_WITH_IMMEDIATE) ||
+ opcode == OP(RDMA_WRITE_FIRST) ||
+ opcode == OP(RDMA_WRITE_ONLY) ||
+ opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
+ break;
+ goto inv;
+ }
+
+ /* OK, process the packet. */
+ switch (opcode) {
+ case OP(SEND_FIRST):
+ case OP(SEND_ONLY):
+ case OP(SEND_ONLY_WITH_IMMEDIATE):
+ send_first:
+ if (qp->r_flags & IPATH_R_REUSE_SGE) {
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
+ qp->r_sge = qp->s_rdma_read_sge;
+ } else if (!ipath_get_rwqe(qp, 0)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ /* Save the WQE so we can reuse it in case of an error. */
+ qp->s_rdma_read_sge = qp->r_sge;
+ qp->r_rcv_len = 0;
+ if (opcode == OP(SEND_ONLY))
+ goto send_last;
+ else if (opcode == OP(SEND_ONLY_WITH_IMMEDIATE))
+ goto send_last_imm;
+ /* FALLTHROUGH */
+ case OP(SEND_MIDDLE):
+ /* Check for invalid length PMTU or posted rwqe len. */
+ if (unlikely(tlen != (hdrsize + pmtu + 4))) {
+ qp->r_flags |= IPATH_R_REUSE_SGE;
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ qp->r_rcv_len += pmtu;
+ if (unlikely(qp->r_rcv_len > qp->r_len)) {
+ qp->r_flags |= IPATH_R_REUSE_SGE;
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ ipath_copy_sge(&qp->r_sge, data, pmtu);
+ break;
+
+ case OP(SEND_LAST_WITH_IMMEDIATE):
+ send_last_imm:
+ if (header_in_data) {
+ wc.ex.imm_data = *(__be32 *) data;
+ data += sizeof(__be32);
+ } else {
+ /* Immediate data comes after BTH */
+ wc.ex.imm_data = ohdr->u.imm_data;
+ }
+ hdrsize += 4;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ /* FALLTHROUGH */
+ case OP(SEND_LAST):
+ send_last:
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /* Check for invalid length. */
+ /* XXX LAST len should be >= 1 */
+ if (unlikely(tlen < (hdrsize + pad + 4))) {
+ qp->r_flags |= IPATH_R_REUSE_SGE;
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ /* Don't count the CRC. */
+ tlen -= (hdrsize + pad + 4);
+ wc.byte_len = tlen + qp->r_rcv_len;
+ if (unlikely(wc.byte_len > qp->r_len)) {
+ qp->r_flags |= IPATH_R_REUSE_SGE;
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ wc.opcode = IB_WC_RECV;
+ last_imm:
+ ipath_copy_sge(&qp->r_sge, data, tlen);
+ wc.wr_id = qp->r_wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = qp->remote_qpn;
+ wc.slid = qp->remote_ah_attr.dlid;
+ wc.sl = qp->remote_ah_attr.sl;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
+ (ohdr->bth[0] &
+ cpu_to_be32(1 << 23)) != 0);
+ break;
+
+ case OP(RDMA_WRITE_FIRST):
+ case OP(RDMA_WRITE_ONLY):
+ case OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE): /* consume RWQE */
+ rdma_first:
+ /* RETH comes after BTH */
+ if (!header_in_data)
+ reth = &ohdr->u.rc.reth;
+ else {
+ reth = (struct ib_reth *)data;
+ data += sizeof(*reth);
+ }
+ hdrsize += sizeof(*reth);
+ qp->r_len = be32_to_cpu(reth->length);
+ qp->r_rcv_len = 0;
+ if (qp->r_len != 0) {
+ u32 rkey = be32_to_cpu(reth->rkey);
+ u64 vaddr = be64_to_cpu(reth->vaddr);
+ int ok;
+
+ /* Check rkey */
+ ok = ipath_rkey_ok(qp, &qp->r_sge, qp->r_len,
+ vaddr, rkey,
+ IB_ACCESS_REMOTE_WRITE);
+ if (unlikely(!ok)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ } else {
+ qp->r_sge.sg_list = NULL;
+ qp->r_sge.sge.mr = NULL;
+ qp->r_sge.sge.vaddr = NULL;
+ qp->r_sge.sge.length = 0;
+ qp->r_sge.sge.sge_length = 0;
+ }
+ if (unlikely(!(qp->qp_access_flags &
+ IB_ACCESS_REMOTE_WRITE))) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ if (opcode == OP(RDMA_WRITE_ONLY))
+ goto rdma_last;
+ else if (opcode == OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE))
+ goto rdma_last_imm;
+ /* FALLTHROUGH */
+ case OP(RDMA_WRITE_MIDDLE):
+ /* Check for invalid length PMTU or posted rwqe len. */
+ if (unlikely(tlen != (hdrsize + pmtu + 4))) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ qp->r_rcv_len += pmtu;
+ if (unlikely(qp->r_rcv_len > qp->r_len)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ ipath_copy_sge(&qp->r_sge, data, pmtu);
+ break;
+
+ case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE):
+ rdma_last_imm:
+ if (header_in_data) {
+ wc.ex.imm_data = *(__be32 *) data;
+ data += sizeof(__be32);
+ } else {
+ /* Immediate data comes after BTH */
+ wc.ex.imm_data = ohdr->u.imm_data;
+ }
+ hdrsize += 4;
+ wc.wc_flags = IB_WC_WITH_IMM;
+
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /* Check for invalid length. */
+ /* XXX LAST len should be >= 1 */
+ if (unlikely(tlen < (hdrsize + pad + 4))) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ /* Don't count the CRC. */
+ tlen -= (hdrsize + pad + 4);
+ if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ if (qp->r_flags & IPATH_R_REUSE_SGE)
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
+ else if (!ipath_get_rwqe(qp, 1)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ wc.byte_len = qp->r_len;
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
+ goto last_imm;
+
+ case OP(RDMA_WRITE_LAST):
+ rdma_last:
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ /* Check for invalid length. */
+ /* XXX LAST len should be >= 1 */
+ if (unlikely(tlen < (hdrsize + pad + 4))) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ /* Don't count the CRC. */
+ tlen -= (hdrsize + pad + 4);
+ if (unlikely(tlen + qp->r_rcv_len != qp->r_len)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ ipath_copy_sge(&qp->r_sge, data, tlen);
+ break;
+
+ default:
+ /* Drop packet for unknown opcodes. */
+ dev->n_pkt_drops++;
+ goto done;
+ }
+ qp->r_psn++;
+ qp->r_state = opcode;
+done:
+ return;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/sched.h>
+#include <rdma/ib_smi.h>
+
+#include "ipath_verbs.h"
+#include "ipath_kernel.h"
+
+/**
+ * ipath_ud_loopback - handle send on loopback QPs
+ * @sqp: the sending QP
+ * @swqe: the send work request
+ *
+ * This is called from ipath_make_ud_req() to forward a WQE addressed
+ * to the same HCA.
+ * Note that the receive interrupt handler may be calling ipath_ud_rcv()
+ * while this is being called.
+ */
+static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
+{
+ struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
+ struct ipath_qp *qp;
+ struct ib_ah_attr *ah_attr;
+ unsigned long flags;
+ struct ipath_rq *rq;
+ struct ipath_srq *srq;
+ struct ipath_sge_state rsge;
+ struct ipath_sge *sge;
+ struct ipath_rwq *wq;
+ struct ipath_rwqe *wqe;
+ void (*handler)(struct ib_event *, void *);
+ struct ib_wc wc;
+ u32 tail;
+ u32 rlen;
+ u32 length;
+
+ qp = ipath_lookup_qpn(&dev->qp_table, swqe->wr.wr.ud.remote_qpn);
+ if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ dev->n_pkt_drops++;
+ goto done;
+ }
+
+ /*
+ * Check that the qkey matches (except for QP0, see 9.6.1.4.1).
+ * Qkeys with the high order bit set mean use the
+ * qkey from the QP context instead of the WR (see 10.2.5).
+ */
+ if (unlikely(qp->ibqp.qp_num &&
+ ((int) swqe->wr.wr.ud.remote_qkey < 0 ?
+ sqp->qkey : swqe->wr.wr.ud.remote_qkey) != qp->qkey)) {
+ /* XXX OK to lose a count once in a while. */
+ dev->qkey_violations++;
+ dev->n_pkt_drops++;
+ goto drop;
+ }
+
+ /*
+ * A GRH is expected to precede the data even if not
+ * present on the wire.
+ */
+ length = swqe->length;
+ memset(&wc, 0, sizeof wc);
+ wc.byte_len = length + sizeof(struct ib_grh);
+
+ if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
+ wc.wc_flags = IB_WC_WITH_IMM;
+ wc.ex.imm_data = swqe->wr.ex.imm_data;
+ }
+
+ /*
+ * This would be a lot simpler if we could call ipath_get_rwqe()
+ * but that uses state that the receive interrupt handler uses
+ * so we would need to lock out receive interrupts while doing
+ * local loopback.
+ */
+ if (qp->ibqp.srq) {
+ srq = to_isrq(qp->ibqp.srq);
+ handler = srq->ibsrq.event_handler;
+ rq = &srq->rq;
+ } else {
+ srq = NULL;
+ handler = NULL;
+ rq = &qp->r_rq;
+ }
+
+ /*
+ * Get the next work request entry to find where to put the data.
+ * Note that it is safe to drop the lock after changing rq->tail
+ * since ipath_post_receive() won't fill the empty slot.
+ */
+ spin_lock_irqsave(&rq->lock, flags);
+ wq = rq->wq;
+ tail = wq->tail;
+ /* Validate tail before using it since it is user writable. */
+ if (tail >= rq->size)
+ tail = 0;
+ if (unlikely(tail == wq->head)) {
+ spin_unlock_irqrestore(&rq->lock, flags);
+ dev->n_pkt_drops++;
+ goto drop;
+ }
+ wqe = get_rwqe_ptr(rq, tail);
+ rsge.sg_list = qp->r_ud_sg_list;
+ if (!ipath_init_sge(qp, wqe, &rlen, &rsge)) {
+ spin_unlock_irqrestore(&rq->lock, flags);
+ dev->n_pkt_drops++;
+ goto drop;
+ }
+ /* Silently drop packets which are too big. */
+ if (wc.byte_len > rlen) {
+ spin_unlock_irqrestore(&rq->lock, flags);
+ dev->n_pkt_drops++;
+ goto drop;
+ }
+ if (++tail >= rq->size)
+ tail = 0;
+ wq->tail = tail;
+ wc.wr_id = wqe->wr_id;
+ if (handler) {
+ u32 n;
+
+ /*
+ * validate head pointer value and compute
+ * the number of remaining WQEs.
+ */
+ n = wq->head;
+ if (n >= rq->size)
+ n = 0;
+ if (n < tail)
+ n += rq->size - tail;
+ else
+ n -= tail;
+ if (n < srq->limit) {
+ struct ib_event ev;
+
+ srq->limit = 0;
+ spin_unlock_irqrestore(&rq->lock, flags);
+ ev.device = qp->ibqp.device;
+ ev.element.srq = qp->ibqp.srq;
+ ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
+ handler(&ev, srq->ibsrq.srq_context);
+ } else
+ spin_unlock_irqrestore(&rq->lock, flags);
+ } else
+ spin_unlock_irqrestore(&rq->lock, flags);
+
+ ah_attr = &to_iah(swqe->wr.wr.ud.ah)->attr;
+ if (ah_attr->ah_flags & IB_AH_GRH) {
+ ipath_copy_sge(&rsge, &ah_attr->grh, sizeof(struct ib_grh));
+ wc.wc_flags |= IB_WC_GRH;
+ } else
+ ipath_skip_sge(&rsge, sizeof(struct ib_grh));
+ sge = swqe->sg_list;
+ while (length) {
+ u32 len = sge->length;
+
+ if (len > length)
+ len = length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ ipath_copy_sge(&rsge, sge->vaddr, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--swqe->wr.num_sge)
+ sge++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ length -= len;
+ }
+ wc.status = IB_WC_SUCCESS;
+ wc.opcode = IB_WC_RECV;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = sqp->ibqp.qp_num;
+ /* XXX do we know which pkey matched? Only needed for GSI. */
+ wc.pkey_index = 0;
+ wc.slid = dev->dd->ipath_lid |
+ (ah_attr->src_path_bits &
+ ((1 << dev->dd->ipath_lmc) - 1));
+ wc.sl = ah_attr->sl;
+ wc.dlid_path_bits =
+ ah_attr->dlid & ((1 << dev->dd->ipath_lmc) - 1);
+ wc.port_num = 1;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
+ swqe->wr.send_flags & IB_SEND_SOLICITED);
+drop:
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+done:;
+}
+
+/**
+ * ipath_make_ud_req - construct a UD request packet
+ * @qp: the QP
+ *
+ * Return 1 if constructed; otherwise, return 0.
+ */
+int ipath_make_ud_req(struct ipath_qp *qp)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_other_headers *ohdr;
+ struct ib_ah_attr *ah_attr;
+ struct ipath_swqe *wqe;
+ unsigned long flags;
+ u32 nwords;
+ u32 extra_bytes;
+ u32 bth0;
+ u16 lrh0;
+ u16 lid;
+ int ret = 0;
+ int next_cur;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+ goto done;
+ }
+
+ if (qp->s_cur == qp->s_head)
+ goto bail;
+
+ wqe = get_swqe_ptr(qp, qp->s_cur);
+ next_cur = qp->s_cur + 1;
+ if (next_cur >= qp->s_size)
+ next_cur = 0;
+
+ /* Construct the header. */
+ ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
+ if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE) {
+ if (ah_attr->dlid != IPATH_PERMISSIVE_LID)
+ dev->n_multicast_xmit++;
+ else
+ dev->n_unicast_xmit++;
+ } else {
+ dev->n_unicast_xmit++;
+ lid = ah_attr->dlid & ~((1 << dev->dd->ipath_lmc) - 1);
+ if (unlikely(lid == dev->dd->ipath_lid)) {
+ /*
+ * If DMAs are in progress, we can't generate
+ * a completion for the loopback packet since
+ * it would be out of order.
+ * XXX Instead of waiting, we could queue a
+ * zero length descriptor so we get a callback.
+ */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ qp->s_cur = next_cur;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ ipath_ud_loopback(qp, wqe);
+ spin_lock_irqsave(&qp->s_lock, flags);
+ ipath_send_complete(qp, wqe, IB_WC_SUCCESS);
+ goto done;
+ }
+ }
+
+ qp->s_cur = next_cur;
+ extra_bytes = -wqe->length & 3;
+ nwords = (wqe->length + extra_bytes) >> 2;
+
+ /* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */
+ qp->s_hdrwords = 7;
+ qp->s_cur_size = wqe->length;
+ qp->s_cur_sge = &qp->s_sge;
+ qp->s_dmult = ah_attr->static_rate;
+ qp->s_wqe = wqe;
+ qp->s_sge.sge = wqe->sg_list[0];
+ qp->s_sge.sg_list = wqe->sg_list + 1;
+ qp->s_sge.num_sge = wqe->wr.num_sge;
+
+ if (ah_attr->ah_flags & IB_AH_GRH) {
+ /* Header size in 32-bit words. */
+ qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
+ &ah_attr->grh,
+ qp->s_hdrwords, nwords);
+ lrh0 = IPATH_LRH_GRH;
+ ohdr = &qp->s_hdr.u.l.oth;
+ /*
+ * Don't worry about sending to locally attached multicast
+ * QPs. It is unspecified by the spec. what happens.
+ */
+ } else {
+ /* Header size in 32-bit words. */
+ lrh0 = IPATH_LRH_BTH;
+ ohdr = &qp->s_hdr.u.oth;
+ }
+ if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
+ qp->s_hdrwords++;
+ ohdr->u.ud.imm_data = wqe->wr.ex.imm_data;
+ bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
+ } else
+ bth0 = IB_OPCODE_UD_SEND_ONLY << 24;
+ lrh0 |= ah_attr->sl << 4;
+ if (qp->ibqp.qp_type == IB_QPT_SMI)
+ lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */
+ qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
+ qp->s_hdr.lrh[1] = cpu_to_be16(ah_attr->dlid); /* DEST LID */
+ qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords +
+ SIZE_OF_CRC);
+ lid = dev->dd->ipath_lid;
+ if (lid) {
+ lid |= ah_attr->src_path_bits &
+ ((1 << dev->dd->ipath_lmc) - 1);
+ qp->s_hdr.lrh[3] = cpu_to_be16(lid);
+ } else
+ qp->s_hdr.lrh[3] = IB_LID_PERMISSIVE;
+ if (wqe->wr.send_flags & IB_SEND_SOLICITED)
+ bth0 |= 1 << 23;
+ bth0 |= extra_bytes << 20;
+ bth0 |= qp->ibqp.qp_type == IB_QPT_SMI ? IPATH_DEFAULT_P_KEY :
+ ipath_get_pkey(dev->dd, qp->s_pkey_index);
+ ohdr->bth[0] = cpu_to_be32(bth0);
+ /*
+ * Use the multicast QP if the destination LID is a multicast LID.
+ */
+ ohdr->bth[1] = ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
+ ah_attr->dlid != IPATH_PERMISSIVE_LID ?
+ cpu_to_be32(IPATH_MULTICAST_QPN) :
+ cpu_to_be32(wqe->wr.wr.ud.remote_qpn);
+ ohdr->bth[2] = cpu_to_be32(qp->s_next_psn++ & IPATH_PSN_MASK);
+ /*
+ * Qkeys with the high order bit set mean use the
+ * qkey from the QP context instead of the WR (see 10.2.5).
+ */
+ ohdr->u.ud.deth[0] = cpu_to_be32((int)wqe->wr.wr.ud.remote_qkey < 0 ?
+ qp->qkey : wqe->wr.wr.ud.remote_qkey);
+ ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num);
+
+done:
+ ret = 1;
+ goto unlock;
+
+bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ return ret;
+}
+
+/**
+ * ipath_ud_rcv - receive an incoming UD packet
+ * @dev: the device the packet came in on
+ * @hdr: the packet header
+ * @has_grh: true if the packet has a GRH
+ * @data: the packet data
+ * @tlen: the packet length
+ * @qp: the QP the packet came on
+ *
+ * This is called from ipath_qp_rcv() to process an incoming UD packet
+ * for the given QP.
+ * Called at interrupt level.
+ */
+void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp)
+{
+ struct ipath_other_headers *ohdr;
+ int opcode;
+ u32 hdrsize;
+ u32 pad;
+ struct ib_wc wc;
+ u32 qkey;
+ u32 src_qp;
+ u16 dlid;
+ int header_in_data;
+
+ /* Check for GRH */
+ if (!has_grh) {
+ ohdr = &hdr->u.oth;
+ hdrsize = 8 + 12 + 8; /* LRH + BTH + DETH */
+ qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
+ src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
+ header_in_data = 0;
+ } else {
+ ohdr = &hdr->u.l.oth;
+ hdrsize = 8 + 40 + 12 + 8; /* LRH + GRH + BTH + DETH */
+ /*
+ * The header with GRH is 68 bytes and the core driver sets
+ * the eager header buffer size to 56 bytes so the last 12
+ * bytes of the IB header is in the data buffer.
+ */
+ header_in_data = dev->dd->ipath_rcvhdrentsize == 16;
+ if (header_in_data) {
+ qkey = be32_to_cpu(((__be32 *) data)[1]);
+ src_qp = be32_to_cpu(((__be32 *) data)[2]);
+ data += 12;
+ } else {
+ qkey = be32_to_cpu(ohdr->u.ud.deth[0]);
+ src_qp = be32_to_cpu(ohdr->u.ud.deth[1]);
+ }
+ }
+ src_qp &= IPATH_QPN_MASK;
+
+ /*
+ * Check that the permissive LID is only used on QP0
+ * and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1).
+ */
+ if (qp->ibqp.qp_num) {
+ if (unlikely(hdr->lrh[1] == IB_LID_PERMISSIVE ||
+ hdr->lrh[3] == IB_LID_PERMISSIVE)) {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ if (unlikely(qkey != qp->qkey)) {
+ /* XXX OK to lose a count once in a while. */
+ dev->qkey_violations++;
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ } else if (hdr->lrh[1] == IB_LID_PERMISSIVE ||
+ hdr->lrh[3] == IB_LID_PERMISSIVE) {
+ struct ib_smp *smp = (struct ib_smp *) data;
+
+ if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ }
+
+ /*
+ * The opcode is in the low byte when its in network order
+ * (top byte when in host order).
+ */
+ opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ if (qp->ibqp.qp_num > 1 &&
+ opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
+ if (header_in_data) {
+ wc.ex.imm_data = *(__be32 *) data;
+ data += sizeof(__be32);
+ } else
+ wc.ex.imm_data = ohdr->u.ud.imm_data;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ hdrsize += sizeof(u32);
+ } else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
+ wc.ex.imm_data = 0;
+ wc.wc_flags = 0;
+ } else {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+
+ /* Get the number of bytes the message was padded by. */
+ pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
+ if (unlikely(tlen < (hdrsize + pad + 4))) {
+ /* Drop incomplete packets. */
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ tlen -= hdrsize + pad + 4;
+
+ /* Drop invalid MAD packets (see 13.5.3.1). */
+ if (unlikely((qp->ibqp.qp_num == 0 &&
+ (tlen != 256 ||
+ (be16_to_cpu(hdr->lrh[0]) >> 12) != 15)) ||
+ (qp->ibqp.qp_num == 1 &&
+ (tlen != 256 ||
+ (be16_to_cpu(hdr->lrh[0]) >> 12) == 15)))) {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+
+ /*
+ * A GRH is expected to precede the data even if not
+ * present on the wire.
+ */
+ wc.byte_len = tlen + sizeof(struct ib_grh);
+
+ /*
+ * Get the next work request entry to find where to put the data.
+ */
+ if (qp->r_flags & IPATH_R_REUSE_SGE)
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
+ else if (!ipath_get_rwqe(qp, 0)) {
+ /*
+ * Count VL15 packets dropped due to no receive buffer.
+ * Otherwise, count them as buffer overruns since usually,
+ * the HW will be able to receive packets even if there are
+ * no QPs with posted receive buffers.
+ */
+ if (qp->ibqp.qp_num == 0)
+ dev->n_vl15_dropped++;
+ else
+ dev->rcv_errors++;
+ goto bail;
+ }
+ /* Silently drop packets which are too big. */
+ if (wc.byte_len > qp->r_len) {
+ qp->r_flags |= IPATH_R_REUSE_SGE;
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ if (has_grh) {
+ ipath_copy_sge(&qp->r_sge, &hdr->u.l.grh,
+ sizeof(struct ib_grh));
+ wc.wc_flags |= IB_WC_GRH;
+ } else
+ ipath_skip_sge(&qp->r_sge, sizeof(struct ib_grh));
+ ipath_copy_sge(&qp->r_sge, data,
+ wc.byte_len - sizeof(struct ib_grh));
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
+ goto bail;
+ wc.wr_id = qp->r_wr_id;
+ wc.status = IB_WC_SUCCESS;
+ wc.opcode = IB_WC_RECV;
+ wc.vendor_err = 0;
+ wc.qp = &qp->ibqp;
+ wc.src_qp = src_qp;
+ /* XXX do we know which pkey matched? Only needed for GSI. */
+ wc.pkey_index = 0;
+ wc.slid = be16_to_cpu(hdr->lrh[3]);
+ wc.sl = (be16_to_cpu(hdr->lrh[0]) >> 4) & 0xF;
+ dlid = be16_to_cpu(hdr->lrh[1]);
+ /*
+ * Save the LMC lower bits if the destination LID is a unicast LID.
+ */
+ wc.dlid_path_bits = dlid >= IPATH_MULTICAST_LID_BASE ? 0 :
+ dlid & ((1 << dev->dd->ipath_lmc) - 1);
+ wc.port_num = 1;
+ /* Signal completion event if the solicited bit is set. */
+ ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
+ (ohdr->bth[0] &
+ cpu_to_be32(1 << 23)) != 0);
+
+bail:;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include "ipath_kernel.h"
+
+static void __ipath_release_user_pages(struct page **p, size_t num_pages,
+ int dirty)
+{
+ size_t i;
+
+ for (i = 0; i < num_pages; i++) {
+ ipath_cdbg(MM, "%lu/%lu put_page %p\n", (unsigned long) i,
+ (unsigned long) num_pages, p[i]);
+ if (dirty)
+ set_page_dirty_lock(p[i]);
+ put_page(p[i]);
+ }
+}
+
+/* call with current->mm->mmap_sem held */
+static int __ipath_get_user_pages(unsigned long start_page, size_t num_pages,
+ struct page **p)
+{
+ unsigned long lock_limit;
+ size_t got;
+ int ret;
+
+ lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
+
+ if (num_pages > lock_limit) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ ipath_cdbg(VERBOSE, "pin %lx pages from vaddr %lx\n",
+ (unsigned long) num_pages, start_page);
+
+ for (got = 0; got < num_pages; got += ret) {
+ ret = get_user_pages(current, current->mm,
+ start_page + got * PAGE_SIZE,
+ num_pages - got, 1, 1,
+ p + got, NULL);
+ if (ret < 0)
+ goto bail_release;
+ }
+
+ current->mm->pinned_vm += num_pages;
+
+ ret = 0;
+ goto bail;
+
+bail_release:
+ __ipath_release_user_pages(p, got, 0);
+bail:
+ return ret;
+}
+
+/**
+ * ipath_map_page - a safety wrapper around pci_map_page()
+ *
+ * A dma_addr of all 0's is interpreted by the chip as "disabled".
+ * Unfortunately, it can also be a valid dma_addr returned on some
+ * architectures.
+ *
+ * The powerpc iommu assigns dma_addrs in ascending order, so we don't
+ * have to bother with retries or mapping a dummy page to insure we
+ * don't just get the same mapping again.
+ *
+ * I'm sure we won't be so lucky with other iommu's, so FIXME.
+ */
+dma_addr_t ipath_map_page(struct pci_dev *hwdev, struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ dma_addr_t phys;
+
+ phys = pci_map_page(hwdev, page, offset, size, direction);
+
+ if (phys == 0) {
+ pci_unmap_page(hwdev, phys, size, direction);
+ phys = pci_map_page(hwdev, page, offset, size, direction);
+ /*
+ * FIXME: If we get 0 again, we should keep this page,
+ * map another, then free the 0 page.
+ */
+ }
+
+ return phys;
+}
+
+/**
+ * ipath_map_single - a safety wrapper around pci_map_single()
+ *
+ * Same idea as ipath_map_page().
+ */
+dma_addr_t ipath_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
+ int direction)
+{
+ dma_addr_t phys;
+
+ phys = pci_map_single(hwdev, ptr, size, direction);
+
+ if (phys == 0) {
+ pci_unmap_single(hwdev, phys, size, direction);
+ phys = pci_map_single(hwdev, ptr, size, direction);
+ /*
+ * FIXME: If we get 0 again, we should keep this page,
+ * map another, then free the 0 page.
+ */
+ }
+
+ return phys;
+}
+
+/**
+ * ipath_get_user_pages - lock user pages into memory
+ * @start_page: the start page
+ * @num_pages: the number of pages
+ * @p: the output page structures
+ *
+ * This function takes a given start page (page aligned user virtual
+ * address) and pins it and the following specified number of pages. For
+ * now, num_pages is always 1, but that will probably change at some point
+ * (because caller is doing expected sends on a single virtually contiguous
+ * buffer, so we can do all pages at once).
+ */
+int ipath_get_user_pages(unsigned long start_page, size_t num_pages,
+ struct page **p)
+{
+ int ret;
+
+ down_write(¤t->mm->mmap_sem);
+
+ ret = __ipath_get_user_pages(start_page, num_pages, p);
+
+ up_write(¤t->mm->mmap_sem);
+
+ return ret;
+}
+
+void ipath_release_user_pages(struct page **p, size_t num_pages)
+{
+ down_write(¤t->mm->mmap_sem);
+
+ __ipath_release_user_pages(p, num_pages, 1);
+
+ current->mm->pinned_vm -= num_pages;
+
+ up_write(¤t->mm->mmap_sem);
+}
+
+struct ipath_user_pages_work {
+ struct work_struct work;
+ struct mm_struct *mm;
+ unsigned long num_pages;
+};
+
+static void user_pages_account(struct work_struct *_work)
+{
+ struct ipath_user_pages_work *work =
+ container_of(_work, struct ipath_user_pages_work, work);
+
+ down_write(&work->mm->mmap_sem);
+ work->mm->pinned_vm -= work->num_pages;
+ up_write(&work->mm->mmap_sem);
+ mmput(work->mm);
+ kfree(work);
+}
+
+void ipath_release_user_pages_on_close(struct page **p, size_t num_pages)
+{
+ struct ipath_user_pages_work *work;
+ struct mm_struct *mm;
+
+ __ipath_release_user_pages(p, num_pages, 1);
+
+ mm = get_task_mm(current);
+ if (!mm)
+ return;
+
+ work = kmalloc(sizeof(*work), GFP_KERNEL);
+ if (!work)
+ goto bail_mm;
+
+ INIT_WORK(&work->work, user_pages_account);
+ work->mm = mm;
+ work->num_pages = num_pages;
+
+ queue_work(ib_wq, &work->work);
+ return;
+
+bail_mm:
+ mmput(mm);
+ return;
+}
--- /dev/null
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/uio.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ipath_kernel.h"
+#include "ipath_user_sdma.h"
+
+/* minimum size of header */
+#define IPATH_USER_SDMA_MIN_HEADER_LENGTH 64
+/* expected size of headers (for dma_pool) */
+#define IPATH_USER_SDMA_EXP_HEADER_LENGTH 64
+/* length mask in PBC (lower 11 bits) */
+#define IPATH_PBC_LENGTH_MASK ((1 << 11) - 1)
+
+struct ipath_user_sdma_pkt {
+ u8 naddr; /* dimension of addr (1..3) ... */
+ u32 counter; /* sdma pkts queued counter for this entry */
+ u64 added; /* global descq number of entries */
+
+ struct {
+ u32 offset; /* offset for kvaddr, addr */
+ u32 length; /* length in page */
+ u8 put_page; /* should we put_page? */
+ u8 dma_mapped; /* is page dma_mapped? */
+ struct page *page; /* may be NULL (coherent mem) */
+ void *kvaddr; /* FIXME: only for pio hack */
+ dma_addr_t addr;
+ } addr[4]; /* max pages, any more and we coalesce */
+ struct list_head list; /* list element */
+};
+
+struct ipath_user_sdma_queue {
+ /*
+ * pkts sent to dma engine are queued on this
+ * list head. the type of the elements of this
+ * list are struct ipath_user_sdma_pkt...
+ */
+ struct list_head sent;
+
+ /* headers with expected length are allocated from here... */
+ char header_cache_name[64];
+ struct dma_pool *header_cache;
+
+ /* packets are allocated from the slab cache... */
+ char pkt_slab_name[64];
+ struct kmem_cache *pkt_slab;
+
+ /* as packets go on the queued queue, they are counted... */
+ u32 counter;
+ u32 sent_counter;
+
+ /* dma page table */
+ struct rb_root dma_pages_root;
+
+ /* protect everything above... */
+ struct mutex lock;
+};
+
+struct ipath_user_sdma_queue *
+ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport)
+{
+ struct ipath_user_sdma_queue *pq =
+ kmalloc(sizeof(struct ipath_user_sdma_queue), GFP_KERNEL);
+
+ if (!pq)
+ goto done;
+
+ pq->counter = 0;
+ pq->sent_counter = 0;
+ INIT_LIST_HEAD(&pq->sent);
+
+ mutex_init(&pq->lock);
+
+ snprintf(pq->pkt_slab_name, sizeof(pq->pkt_slab_name),
+ "ipath-user-sdma-pkts-%u-%02u.%02u", unit, port, sport);
+ pq->pkt_slab = kmem_cache_create(pq->pkt_slab_name,
+ sizeof(struct ipath_user_sdma_pkt),
+ 0, 0, NULL);
+
+ if (!pq->pkt_slab)
+ goto err_kfree;
+
+ snprintf(pq->header_cache_name, sizeof(pq->header_cache_name),
+ "ipath-user-sdma-headers-%u-%02u.%02u", unit, port, sport);
+ pq->header_cache = dma_pool_create(pq->header_cache_name,
+ dev,
+ IPATH_USER_SDMA_EXP_HEADER_LENGTH,
+ 4, 0);
+ if (!pq->header_cache)
+ goto err_slab;
+
+ pq->dma_pages_root = RB_ROOT;
+
+ goto done;
+
+err_slab:
+ kmem_cache_destroy(pq->pkt_slab);
+err_kfree:
+ kfree(pq);
+ pq = NULL;
+
+done:
+ return pq;
+}
+
+static void ipath_user_sdma_init_frag(struct ipath_user_sdma_pkt *pkt,
+ int i, size_t offset, size_t len,
+ int put_page, int dma_mapped,
+ struct page *page,
+ void *kvaddr, dma_addr_t dma_addr)
+{
+ pkt->addr[i].offset = offset;
+ pkt->addr[i].length = len;
+ pkt->addr[i].put_page = put_page;
+ pkt->addr[i].dma_mapped = dma_mapped;
+ pkt->addr[i].page = page;
+ pkt->addr[i].kvaddr = kvaddr;
+ pkt->addr[i].addr = dma_addr;
+}
+
+static void ipath_user_sdma_init_header(struct ipath_user_sdma_pkt *pkt,
+ u32 counter, size_t offset,
+ size_t len, int dma_mapped,
+ struct page *page,
+ void *kvaddr, dma_addr_t dma_addr)
+{
+ pkt->naddr = 1;
+ pkt->counter = counter;
+ ipath_user_sdma_init_frag(pkt, 0, offset, len, 0, dma_mapped, page,
+ kvaddr, dma_addr);
+}
+
+/* we've too many pages in the iovec, coalesce to a single page */
+static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov) {
+ int ret = 0;
+ struct page *page = alloc_page(GFP_KERNEL);
+ void *mpage_save;
+ char *mpage;
+ int i;
+ int len = 0;
+ dma_addr_t dma_addr;
+
+ if (!page) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ mpage = kmap(page);
+ mpage_save = mpage;
+ for (i = 0; i < niov; i++) {
+ int cfur;
+
+ cfur = copy_from_user(mpage,
+ iov[i].iov_base, iov[i].iov_len);
+ if (cfur) {
+ ret = -EFAULT;
+ goto free_unmap;
+ }
+
+ mpage += iov[i].iov_len;
+ len += iov[i].iov_len;
+ }
+
+ dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
+ ret = -ENOMEM;
+ goto free_unmap;
+ }
+
+ ipath_user_sdma_init_frag(pkt, 1, 0, len, 0, 1, page, mpage_save,
+ dma_addr);
+ pkt->naddr = 2;
+
+ goto done;
+
+free_unmap:
+ kunmap(page);
+ __free_page(page);
+done:
+ return ret;
+}
+
+/* how many pages in this iovec element? */
+static int ipath_user_sdma_num_pages(const struct iovec *iov)
+{
+ const unsigned long addr = (unsigned long) iov->iov_base;
+ const unsigned long len = iov->iov_len;
+ const unsigned long spage = addr & PAGE_MASK;
+ const unsigned long epage = (addr + len - 1) & PAGE_MASK;
+
+ return 1 + ((epage - spage) >> PAGE_SHIFT);
+}
+
+/* truncate length to page boundary */
+static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
+{
+ const unsigned long offset = addr & ~PAGE_MASK;
+
+ return ((offset + len) > PAGE_SIZE) ? (PAGE_SIZE - offset) : len;
+}
+
+static void ipath_user_sdma_free_pkt_frag(struct device *dev,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ int frag)
+{
+ const int i = frag;
+
+ if (pkt->addr[i].page) {
+ if (pkt->addr[i].dma_mapped)
+ dma_unmap_page(dev,
+ pkt->addr[i].addr,
+ pkt->addr[i].length,
+ DMA_TO_DEVICE);
+
+ if (pkt->addr[i].kvaddr)
+ kunmap(pkt->addr[i].page);
+
+ if (pkt->addr[i].put_page)
+ put_page(pkt->addr[i].page);
+ else
+ __free_page(pkt->addr[i].page);
+ } else if (pkt->addr[i].kvaddr)
+ /* free coherent mem from cache... */
+ dma_pool_free(pq->header_cache,
+ pkt->addr[i].kvaddr, pkt->addr[i].addr);
+}
+
+/* return number of pages pinned... */
+static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt,
+ unsigned long addr, int tlen, int npages)
+{
+ struct page *pages[2];
+ int j;
+ int ret;
+
+ ret = get_user_pages_fast(addr, npages, 0, pages);
+ if (ret != npages) {
+ int i;
+
+ for (i = 0; i < ret; i++)
+ put_page(pages[i]);
+
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ for (j = 0; j < npages; j++) {
+ /* map the pages... */
+ const int flen =
+ ipath_user_sdma_page_length(addr, tlen);
+ dma_addr_t dma_addr =
+ dma_map_page(&dd->pcidev->dev,
+ pages[j], 0, flen, DMA_TO_DEVICE);
+ unsigned long fofs = addr & ~PAGE_MASK;
+
+ if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ ipath_user_sdma_init_frag(pkt, pkt->naddr, fofs, flen, 1, 1,
+ pages[j], kmap(pages[j]),
+ dma_addr);
+
+ pkt->naddr++;
+ addr += flen;
+ tlen -= flen;
+ }
+
+done:
+ return ret;
+}
+
+static int ipath_user_sdma_pin_pkt(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov)
+{
+ int ret = 0;
+ unsigned long idx;
+
+ for (idx = 0; idx < niov; idx++) {
+ const int npages = ipath_user_sdma_num_pages(iov + idx);
+ const unsigned long addr = (unsigned long) iov[idx].iov_base;
+
+ ret = ipath_user_sdma_pin_pages(dd, pkt,
+ addr, iov[idx].iov_len,
+ npages);
+ if (ret < 0)
+ goto free_pkt;
+ }
+
+ goto done;
+
+free_pkt:
+ for (idx = 0; idx < pkt->naddr; idx++)
+ ipath_user_sdma_free_pkt_frag(&dd->pcidev->dev, pq, pkt, idx);
+
+done:
+ return ret;
+}
+
+static int ipath_user_sdma_init_payload(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov, int npages)
+{
+ int ret = 0;
+
+ if (npages >= ARRAY_SIZE(pkt->addr))
+ ret = ipath_user_sdma_coalesce(dd, pkt, iov, niov);
+ else
+ ret = ipath_user_sdma_pin_pkt(dd, pq, pkt, iov, niov);
+
+ return ret;
+}
+
+/* free a packet list -- return counter value of last packet */
+static void ipath_user_sdma_free_pkt_list(struct device *dev,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *list)
+{
+ struct ipath_user_sdma_pkt *pkt, *pkt_next;
+
+ list_for_each_entry_safe(pkt, pkt_next, list, list) {
+ int i;
+
+ for (i = 0; i < pkt->naddr; i++)
+ ipath_user_sdma_free_pkt_frag(dev, pq, pkt, i);
+
+ kmem_cache_free(pq->pkt_slab, pkt);
+ }
+}
+
+/*
+ * copy headers, coalesce etc -- pq->lock must be held
+ *
+ * we queue all the packets to list, returning the
+ * number of bytes total. list must be empty initially,
+ * as, if there is an error we clean it...
+ */
+static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *list,
+ const struct iovec *iov,
+ unsigned long niov,
+ int maxpkts)
+{
+ unsigned long idx = 0;
+ int ret = 0;
+ int npkts = 0;
+ struct page *page = NULL;
+ __le32 *pbc;
+ dma_addr_t dma_addr;
+ struct ipath_user_sdma_pkt *pkt = NULL;
+ size_t len;
+ size_t nw;
+ u32 counter = pq->counter;
+ int dma_mapped = 0;
+
+ while (idx < niov && npkts < maxpkts) {
+ const unsigned long addr = (unsigned long) iov[idx].iov_base;
+ const unsigned long idx_save = idx;
+ unsigned pktnw;
+ unsigned pktnwc;
+ int nfrags = 0;
+ int npages = 0;
+ int cfur;
+
+ dma_mapped = 0;
+ len = iov[idx].iov_len;
+ nw = len >> 2;
+ page = NULL;
+
+ pkt = kmem_cache_alloc(pq->pkt_slab, GFP_KERNEL);
+ if (!pkt) {
+ ret = -ENOMEM;
+ goto free_list;
+ }
+
+ if (len < IPATH_USER_SDMA_MIN_HEADER_LENGTH ||
+ len > PAGE_SIZE || len & 3 || addr & 3) {
+ ret = -EINVAL;
+ goto free_pkt;
+ }
+
+ if (len == IPATH_USER_SDMA_EXP_HEADER_LENGTH)
+ pbc = dma_pool_alloc(pq->header_cache, GFP_KERNEL,
+ &dma_addr);
+ else
+ pbc = NULL;
+
+ if (!pbc) {
+ page = alloc_page(GFP_KERNEL);
+ if (!page) {
+ ret = -ENOMEM;
+ goto free_pkt;
+ }
+ pbc = kmap(page);
+ }
+
+ cfur = copy_from_user(pbc, iov[idx].iov_base, len);
+ if (cfur) {
+ ret = -EFAULT;
+ goto free_pbc;
+ }
+
+ /*
+ * this assignment is a bit strange. it's because the
+ * the pbc counts the number of 32 bit words in the full
+ * packet _except_ the first word of the pbc itself...
+ */
+ pktnwc = nw - 1;
+
+ /*
+ * pktnw computation yields the number of 32 bit words
+ * that the caller has indicated in the PBC. note that
+ * this is one less than the total number of words that
+ * goes to the send DMA engine as the first 32 bit word
+ * of the PBC itself is not counted. Armed with this count,
+ * we can verify that the packet is consistent with the
+ * iovec lengths.
+ */
+ pktnw = le32_to_cpu(*pbc) & IPATH_PBC_LENGTH_MASK;
+ if (pktnw < pktnwc || pktnw > pktnwc + (PAGE_SIZE >> 2)) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+
+ idx++;
+ while (pktnwc < pktnw && idx < niov) {
+ const size_t slen = iov[idx].iov_len;
+ const unsigned long faddr =
+ (unsigned long) iov[idx].iov_base;
+
+ if (slen & 3 || faddr & 3 || !slen ||
+ slen > PAGE_SIZE) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+ npages++;
+ if ((faddr & PAGE_MASK) !=
+ ((faddr + slen - 1) & PAGE_MASK))
+ npages++;
+
+ pktnwc += slen >> 2;
+ idx++;
+ nfrags++;
+ }
+
+ if (pktnwc != pktnw) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+ if (page) {
+ dma_addr = dma_map_page(&dd->pcidev->dev,
+ page, 0, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&dd->pcidev->dev, dma_addr)) {
+ ret = -ENOMEM;
+ goto free_pbc;
+ }
+
+ dma_mapped = 1;
+ }
+
+ ipath_user_sdma_init_header(pkt, counter, 0, len, dma_mapped,
+ page, pbc, dma_addr);
+
+ if (nfrags) {
+ ret = ipath_user_sdma_init_payload(dd, pq, pkt,
+ iov + idx_save + 1,
+ nfrags, npages);
+ if (ret < 0)
+ goto free_pbc_dma;
+ }
+
+ counter++;
+ npkts++;
+
+ list_add_tail(&pkt->list, list);
+ }
+
+ ret = idx;
+ goto done;
+
+free_pbc_dma:
+ if (dma_mapped)
+ dma_unmap_page(&dd->pcidev->dev, dma_addr, len, DMA_TO_DEVICE);
+free_pbc:
+ if (page) {
+ kunmap(page);
+ __free_page(page);
+ } else
+ dma_pool_free(pq->header_cache, pbc, dma_addr);
+free_pkt:
+ kmem_cache_free(pq->pkt_slab, pkt);
+free_list:
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, list);
+done:
+ return ret;
+}
+
+static void ipath_user_sdma_set_complete_counter(struct ipath_user_sdma_queue *pq,
+ u32 c)
+{
+ pq->sent_counter = c;
+}
+
+/* try to clean out queue -- needs pq->lock */
+static int ipath_user_sdma_queue_clean(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ struct list_head free_list;
+ struct ipath_user_sdma_pkt *pkt;
+ struct ipath_user_sdma_pkt *pkt_prev;
+ int ret = 0;
+
+ INIT_LIST_HEAD(&free_list);
+
+ list_for_each_entry_safe(pkt, pkt_prev, &pq->sent, list) {
+ s64 descd = dd->ipath_sdma_descq_removed - pkt->added;
+
+ if (descd < 0)
+ break;
+
+ list_move_tail(&pkt->list, &free_list);
+
+ /* one more packet cleaned */
+ ret++;
+ }
+
+ if (!list_empty(&free_list)) {
+ u32 counter;
+
+ pkt = list_entry(free_list.prev,
+ struct ipath_user_sdma_pkt, list);
+ counter = pkt->counter;
+
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
+ ipath_user_sdma_set_complete_counter(pq, counter);
+ }
+
+ return ret;
+}
+
+void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq)
+{
+ if (!pq)
+ return;
+
+ kmem_cache_destroy(pq->pkt_slab);
+ dma_pool_destroy(pq->header_cache);
+ kfree(pq);
+}
+
+/* clean descriptor queue, returns > 0 if some elements cleaned */
+static int ipath_user_sdma_hwqueue_clean(struct ipath_devdata *dd)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ ret = ipath_sdma_make_progress(dd);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ return ret;
+}
+
+/* we're in close, drain packets so that we can cleanup successfully... */
+void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ int i;
+
+ if (!pq)
+ return;
+
+ for (i = 0; i < 100; i++) {
+ mutex_lock(&pq->lock);
+ if (list_empty(&pq->sent)) {
+ mutex_unlock(&pq->lock);
+ break;
+ }
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ mutex_unlock(&pq->lock);
+ msleep(10);
+ }
+
+ if (!list_empty(&pq->sent)) {
+ struct list_head free_list;
+
+ printk(KERN_INFO "drain: lists not empty: forcing!\n");
+ INIT_LIST_HEAD(&free_list);
+ mutex_lock(&pq->lock);
+ list_splice_init(&pq->sent, &free_list);
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
+ mutex_unlock(&pq->lock);
+ }
+}
+
+static inline __le64 ipath_sdma_make_desc0(struct ipath_devdata *dd,
+ u64 addr, u64 dwlen, u64 dwoffset)
+{
+ return cpu_to_le64(/* SDmaPhyAddr[31:0] */
+ ((addr & 0xfffffffcULL) << 32) |
+ /* SDmaGeneration[1:0] */
+ ((dd->ipath_sdma_generation & 3ULL) << 30) |
+ /* SDmaDwordCount[10:0] */
+ ((dwlen & 0x7ffULL) << 16) |
+ /* SDmaBufOffset[12:2] */
+ (dwoffset & 0x7ffULL));
+}
+
+static inline __le64 ipath_sdma_make_first_desc0(__le64 descq)
+{
+ return descq | cpu_to_le64(1ULL << 12);
+}
+
+static inline __le64 ipath_sdma_make_last_desc0(__le64 descq)
+{
+ /* last */ /* dma head */
+ return descq | cpu_to_le64(1ULL << 11 | 1ULL << 13);
+}
+
+static inline __le64 ipath_sdma_make_desc1(u64 addr)
+{
+ /* SDmaPhyAddr[47:32] */
+ return cpu_to_le64(addr >> 32);
+}
+
+static void ipath_user_sdma_send_frag(struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt, int idx,
+ unsigned ofs, u16 tail)
+{
+ const u64 addr = (u64) pkt->addr[idx].addr +
+ (u64) pkt->addr[idx].offset;
+ const u64 dwlen = (u64) pkt->addr[idx].length / 4;
+ __le64 *descqp;
+ __le64 descq0;
+
+ descqp = &dd->ipath_sdma_descq[tail].qw[0];
+
+ descq0 = ipath_sdma_make_desc0(dd, addr, dwlen, ofs);
+ if (idx == 0)
+ descq0 = ipath_sdma_make_first_desc0(descq0);
+ if (idx == pkt->naddr - 1)
+ descq0 = ipath_sdma_make_last_desc0(descq0);
+
+ descqp[0] = descq0;
+ descqp[1] = ipath_sdma_make_desc1(addr);
+}
+
+/* pq->lock must be held, get packets on the wire... */
+static int ipath_user_sdma_push_pkts(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *pktlist)
+{
+ int ret = 0;
+ unsigned long flags;
+ u16 tail;
+
+ if (list_empty(pktlist))
+ return 0;
+
+ if (unlikely(!(dd->ipath_flags & IPATH_LINKACTIVE)))
+ return -ECOMM;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ if (unlikely(dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK)) {
+ ret = -ECOMM;
+ goto unlock;
+ }
+
+ tail = dd->ipath_sdma_descq_tail;
+ while (!list_empty(pktlist)) {
+ struct ipath_user_sdma_pkt *pkt =
+ list_entry(pktlist->next, struct ipath_user_sdma_pkt,
+ list);
+ int i;
+ unsigned ofs = 0;
+ u16 dtail = tail;
+
+ if (pkt->naddr > ipath_sdma_descq_freecnt(dd))
+ goto unlock_check_tail;
+
+ for (i = 0; i < pkt->naddr; i++) {
+ ipath_user_sdma_send_frag(dd, pkt, i, ofs, tail);
+ ofs += pkt->addr[i].length >> 2;
+
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ ++dd->ipath_sdma_generation;
+ }
+ }
+
+ if ((ofs<<2) > dd->ipath_ibmaxlen) {
+ ipath_dbg("packet size %X > ibmax %X, fail\n",
+ ofs<<2, dd->ipath_ibmaxlen);
+ ret = -EMSGSIZE;
+ goto unlock;
+ }
+
+ /*
+ * if the packet is >= 2KB mtu equivalent, we have to use
+ * the large buffers, and have to mark each descriptor as
+ * part of a large buffer packet.
+ */
+ if (ofs >= IPATH_SMALLBUF_DWORDS) {
+ for (i = 0; i < pkt->naddr; i++) {
+ dd->ipath_sdma_descq[dtail].qw[0] |=
+ cpu_to_le64(1ULL << 14);
+ if (++dtail == dd->ipath_sdma_descq_cnt)
+ dtail = 0;
+ }
+ }
+
+ dd->ipath_sdma_descq_added += pkt->naddr;
+ pkt->added = dd->ipath_sdma_descq_added;
+ list_move_tail(&pkt->list, &pq->sent);
+ ret++;
+ }
+
+unlock_check_tail:
+ /* advance the tail on the chip if necessary */
+ if (dd->ipath_sdma_descq_tail != tail) {
+ wmb();
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
+ dd->ipath_sdma_descq_tail = tail;
+ }
+
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ return ret;
+}
+
+int ipath_user_sdma_writev(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ const struct iovec *iov,
+ unsigned long dim)
+{
+ int ret = 0;
+ struct list_head list;
+ int npkts = 0;
+
+ INIT_LIST_HEAD(&list);
+
+ mutex_lock(&pq->lock);
+
+ if (dd->ipath_sdma_descq_added != dd->ipath_sdma_descq_removed) {
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ }
+
+ while (dim) {
+ const int mxp = 8;
+
+ ret = ipath_user_sdma_queue_pkts(dd, pq, &list, iov, dim, mxp);
+ if (ret <= 0)
+ goto done_unlock;
+ else {
+ dim -= ret;
+ iov += ret;
+ }
+
+ /* force packets onto the sdma hw queue... */
+ if (!list_empty(&list)) {
+ /*
+ * lazily clean hw queue. the 4 is a guess of about
+ * how many sdma descriptors a packet will take (it
+ * doesn't have to be perfect).
+ */
+ if (ipath_sdma_descq_freecnt(dd) < ret * 4) {
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ }
+
+ ret = ipath_user_sdma_push_pkts(dd, pq, &list);
+ if (ret < 0)
+ goto done_unlock;
+ else {
+ npkts += ret;
+ pq->counter += ret;
+
+ if (!list_empty(&list))
+ goto done_unlock;
+ }
+ }
+ }
+
+done_unlock:
+ if (!list_empty(&list))
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &list);
+ mutex_unlock(&pq->lock);
+
+ return (ret < 0) ? ret : npkts;
+}
+
+int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ int ret = 0;
+
+ mutex_lock(&pq->lock);
+ ipath_user_sdma_hwqueue_clean(dd);
+ ret = ipath_user_sdma_queue_clean(dd, pq);
+ mutex_unlock(&pq->lock);
+
+ return ret;
+}
+
+u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq)
+{
+ return pq->sent_counter;
+}
+
+u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq)
+{
+ return pq->counter;
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/device.h>
+
+struct ipath_user_sdma_queue;
+
+struct ipath_user_sdma_queue *
+ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport);
+void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq);
+
+int ipath_user_sdma_writev(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ const struct iovec *iov,
+ unsigned long dim);
+
+int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq);
+
+void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq);
+
+u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq);
+u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq);
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <rdma/ib_mad.h>
+#include <rdma/ib_user_verbs.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/utsname.h>
+#include <linux/rculist.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+static unsigned int ib_ipath_qp_table_size = 251;
+module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO);
+MODULE_PARM_DESC(qp_table_size, "QP table size");
+
+unsigned int ib_ipath_lkey_table_size = 12;
+module_param_named(lkey_table_size, ib_ipath_lkey_table_size, uint,
+ S_IRUGO);
+MODULE_PARM_DESC(lkey_table_size,
+ "LKEY table size in bits (2^n, 1 <= n <= 23)");
+
+static unsigned int ib_ipath_max_pds = 0xFFFF;
+module_param_named(max_pds, ib_ipath_max_pds, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_pds,
+ "Maximum number of protection domains to support");
+
+static unsigned int ib_ipath_max_ahs = 0xFFFF;
+module_param_named(max_ahs, ib_ipath_max_ahs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_ahs, "Maximum number of address handles to support");
+
+unsigned int ib_ipath_max_cqes = 0x2FFFF;
+module_param_named(max_cqes, ib_ipath_max_cqes, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_cqes,
+ "Maximum number of completion queue entries to support");
+
+unsigned int ib_ipath_max_cqs = 0x1FFFF;
+module_param_named(max_cqs, ib_ipath_max_cqs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_cqs, "Maximum number of completion queues to support");
+
+unsigned int ib_ipath_max_qp_wrs = 0x3FFF;
+module_param_named(max_qp_wrs, ib_ipath_max_qp_wrs, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_qp_wrs, "Maximum number of QP WRs to support");
+
+unsigned int ib_ipath_max_qps = 16384;
+module_param_named(max_qps, ib_ipath_max_qps, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_qps, "Maximum number of QPs to support");
+
+unsigned int ib_ipath_max_sges = 0x60;
+module_param_named(max_sges, ib_ipath_max_sges, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_sges, "Maximum number of SGEs to support");
+
+unsigned int ib_ipath_max_mcast_grps = 16384;
+module_param_named(max_mcast_grps, ib_ipath_max_mcast_grps, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_mcast_grps,
+ "Maximum number of multicast groups to support");
+
+unsigned int ib_ipath_max_mcast_qp_attached = 16;
+module_param_named(max_mcast_qp_attached, ib_ipath_max_mcast_qp_attached,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_mcast_qp_attached,
+ "Maximum number of attached QPs to support");
+
+unsigned int ib_ipath_max_srqs = 1024;
+module_param_named(max_srqs, ib_ipath_max_srqs, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srqs, "Maximum number of SRQs to support");
+
+unsigned int ib_ipath_max_srq_sges = 128;
+module_param_named(max_srq_sges, ib_ipath_max_srq_sges,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srq_sges, "Maximum number of SRQ SGEs to support");
+
+unsigned int ib_ipath_max_srq_wrs = 0x1FFFF;
+module_param_named(max_srq_wrs, ib_ipath_max_srq_wrs,
+ uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(max_srq_wrs, "Maximum number of SRQ WRs support");
+
+static unsigned int ib_ipath_disable_sma;
+module_param_named(disable_sma, ib_ipath_disable_sma, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(disable_sma, "Disable the SMA");
+
+/*
+ * Note that it is OK to post send work requests in the SQE and ERR
+ * states; ipath_do_send() will process them and generate error
+ * completions as per IB 1.2 C10-96.
+ */
+const int ib_ipath_state_ops[IB_QPS_ERR + 1] = {
+ [IB_QPS_RESET] = 0,
+ [IB_QPS_INIT] = IPATH_POST_RECV_OK,
+ [IB_QPS_RTR] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK,
+ [IB_QPS_RTS] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
+ IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK |
+ IPATH_PROCESS_NEXT_SEND_OK,
+ [IB_QPS_SQD] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
+ IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK,
+ [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
+ IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
+ [IB_QPS_ERR] = IPATH_POST_RECV_OK | IPATH_FLUSH_RECV |
+ IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
+};
+
+struct ipath_ucontext {
+ struct ib_ucontext ibucontext;
+};
+
+static inline struct ipath_ucontext *to_iucontext(struct ib_ucontext
+ *ibucontext)
+{
+ return container_of(ibucontext, struct ipath_ucontext, ibucontext);
+}
+
+/*
+ * Translate ib_wr_opcode into ib_wc_opcode.
+ */
+const enum ib_wc_opcode ib_ipath_wc_opcode[] = {
+ [IB_WR_RDMA_WRITE] = IB_WC_RDMA_WRITE,
+ [IB_WR_RDMA_WRITE_WITH_IMM] = IB_WC_RDMA_WRITE,
+ [IB_WR_SEND] = IB_WC_SEND,
+ [IB_WR_SEND_WITH_IMM] = IB_WC_SEND,
+ [IB_WR_RDMA_READ] = IB_WC_RDMA_READ,
+ [IB_WR_ATOMIC_CMP_AND_SWP] = IB_WC_COMP_SWAP,
+ [IB_WR_ATOMIC_FETCH_AND_ADD] = IB_WC_FETCH_ADD
+};
+
+/*
+ * System image GUID.
+ */
+static __be64 sys_image_guid;
+
+/**
+ * ipath_copy_sge - copy data to SGE memory
+ * @ss: the SGE state
+ * @data: the data to copy
+ * @length: the length of the data
+ */
+void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length)
+{
+ struct ipath_sge *sge = &ss->sge;
+
+ while (length) {
+ u32 len = sge->length;
+
+ if (len > length)
+ len = length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ memcpy(sge->vaddr, data, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ data += len;
+ length -= len;
+ }
+}
+
+/**
+ * ipath_skip_sge - skip over SGE memory - XXX almost dup of prev func
+ * @ss: the SGE state
+ * @length: the number of bytes to skip
+ */
+void ipath_skip_sge(struct ipath_sge_state *ss, u32 length)
+{
+ struct ipath_sge *sge = &ss->sge;
+
+ while (length) {
+ u32 len = sge->length;
+
+ if (len > length)
+ len = length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ length -= len;
+ }
+}
+
+/*
+ * Count the number of DMA descriptors needed to send length bytes of data.
+ * Don't modify the ipath_sge_state to get the count.
+ * Return zero if any of the segments is not aligned.
+ */
+static u32 ipath_count_sge(struct ipath_sge_state *ss, u32 length)
+{
+ struct ipath_sge *sg_list = ss->sg_list;
+ struct ipath_sge sge = ss->sge;
+ u8 num_sge = ss->num_sge;
+ u32 ndesc = 1; /* count the header */
+
+ while (length) {
+ u32 len = sge.length;
+
+ if (len > length)
+ len = length;
+ if (len > sge.sge_length)
+ len = sge.sge_length;
+ BUG_ON(len == 0);
+ if (((long) sge.vaddr & (sizeof(u32) - 1)) ||
+ (len != length && (len & (sizeof(u32) - 1)))) {
+ ndesc = 0;
+ break;
+ }
+ ndesc++;
+ sge.vaddr += len;
+ sge.length -= len;
+ sge.sge_length -= len;
+ if (sge.sge_length == 0) {
+ if (--num_sge)
+ sge = *sg_list++;
+ } else if (sge.length == 0 && sge.mr != NULL) {
+ if (++sge.n >= IPATH_SEGSZ) {
+ if (++sge.m >= sge.mr->mapsz)
+ break;
+ sge.n = 0;
+ }
+ sge.vaddr =
+ sge.mr->map[sge.m]->segs[sge.n].vaddr;
+ sge.length =
+ sge.mr->map[sge.m]->segs[sge.n].length;
+ }
+ length -= len;
+ }
+ return ndesc;
+}
+
+/*
+ * Copy from the SGEs to the data buffer.
+ */
+static void ipath_copy_from_sge(void *data, struct ipath_sge_state *ss,
+ u32 length)
+{
+ struct ipath_sge *sge = &ss->sge;
+
+ while (length) {
+ u32 len = sge->length;
+
+ if (len > length)
+ len = length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ memcpy(data, sge->vaddr, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ data += len;
+ length -= len;
+ }
+}
+
+/**
+ * ipath_post_one_send - post one RC, UC, or UD send work request
+ * @qp: the QP to post on
+ * @wr: the work request to send
+ */
+static int ipath_post_one_send(struct ipath_qp *qp, struct ib_send_wr *wr)
+{
+ struct ipath_swqe *wqe;
+ u32 next;
+ int i;
+ int j;
+ int acc;
+ int ret;
+ unsigned long flags;
+ struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ if (qp->ibqp.qp_type != IB_QPT_SMI &&
+ !(dd->ipath_flags & IPATH_LINKACTIVE)) {
+ ret = -ENETDOWN;
+ goto bail;
+ }
+
+ /* Check that state is OK to post send. */
+ if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK)))
+ goto bail_inval;
+
+ /* IB spec says that num_sge == 0 is OK. */
+ if (wr->num_sge > qp->s_max_sge)
+ goto bail_inval;
+
+ /*
+ * Don't allow RDMA reads or atomic operations on UC or
+ * undefined operations.
+ * Make sure buffer is large enough to hold the result for atomics.
+ */
+ if (qp->ibqp.qp_type == IB_QPT_UC) {
+ if ((unsigned) wr->opcode >= IB_WR_RDMA_READ)
+ goto bail_inval;
+ } else if (qp->ibqp.qp_type == IB_QPT_UD) {
+ /* Check UD opcode */
+ if (wr->opcode != IB_WR_SEND &&
+ wr->opcode != IB_WR_SEND_WITH_IMM)
+ goto bail_inval;
+ /* Check UD destination address PD */
+ if (qp->ibqp.pd != wr->wr.ud.ah->pd)
+ goto bail_inval;
+ } else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD)
+ goto bail_inval;
+ else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
+ (wr->num_sge == 0 ||
+ wr->sg_list[0].length < sizeof(u64) ||
+ wr->sg_list[0].addr & (sizeof(u64) - 1)))
+ goto bail_inval;
+ else if (wr->opcode >= IB_WR_RDMA_READ && !qp->s_max_rd_atomic)
+ goto bail_inval;
+
+ next = qp->s_head + 1;
+ if (next >= qp->s_size)
+ next = 0;
+ if (next == qp->s_last) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ wqe = get_swqe_ptr(qp, qp->s_head);
+ wqe->wr = *wr;
+ wqe->length = 0;
+ if (wr->num_sge) {
+ acc = wr->opcode >= IB_WR_RDMA_READ ?
+ IB_ACCESS_LOCAL_WRITE : 0;
+ for (i = 0, j = 0; i < wr->num_sge; i++) {
+ u32 length = wr->sg_list[i].length;
+ int ok;
+
+ if (length == 0)
+ continue;
+ ok = ipath_lkey_ok(qp, &wqe->sg_list[j],
+ &wr->sg_list[i], acc);
+ if (!ok)
+ goto bail_inval;
+ wqe->length += length;
+ j++;
+ }
+ wqe->wr.num_sge = j;
+ }
+ if (qp->ibqp.qp_type == IB_QPT_UC ||
+ qp->ibqp.qp_type == IB_QPT_RC) {
+ if (wqe->length > 0x80000000U)
+ goto bail_inval;
+ } else if (wqe->length > to_idev(qp->ibqp.device)->dd->ipath_ibmtu)
+ goto bail_inval;
+ wqe->ssn = qp->s_ssn++;
+ qp->s_head = next;
+
+ ret = 0;
+ goto bail;
+
+bail_inval:
+ ret = -EINVAL;
+bail:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ return ret;
+}
+
+/**
+ * ipath_post_send - post a send on a QP
+ * @ibqp: the QP to post the send on
+ * @wr: the list of work requests to post
+ * @bad_wr: the first bad WR is put here
+ *
+ * This may be called from interrupt context.
+ */
+static int ipath_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
+ struct ib_send_wr **bad_wr)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+ int err = 0;
+
+ for (; wr; wr = wr->next) {
+ err = ipath_post_one_send(qp, wr);
+ if (err) {
+ *bad_wr = wr;
+ goto bail;
+ }
+ }
+
+ /* Try to do the send work in the caller's context. */
+ ipath_do_send((unsigned long) qp);
+
+bail:
+ return err;
+}
+
+/**
+ * ipath_post_receive - post a receive on a QP
+ * @ibqp: the QP to post the receive on
+ * @wr: the WR to post
+ * @bad_wr: the first bad WR is put here
+ *
+ * This may be called from interrupt context.
+ */
+static int ipath_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
+ struct ib_recv_wr **bad_wr)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_rwq *wq = qp->r_rq.wq;
+ unsigned long flags;
+ int ret;
+
+ /* Check that state is OK to post receive. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_POST_RECV_OK) || !wq) {
+ *bad_wr = wr;
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ for (; wr; wr = wr->next) {
+ struct ipath_rwqe *wqe;
+ u32 next;
+ int i;
+
+ if ((unsigned) wr->num_sge > qp->r_rq.max_sge) {
+ *bad_wr = wr;
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ spin_lock_irqsave(&qp->r_rq.lock, flags);
+ next = wq->head + 1;
+ if (next >= qp->r_rq.size)
+ next = 0;
+ if (next == wq->tail) {
+ spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ *bad_wr = wr;
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ wqe = get_rwqe_ptr(&qp->r_rq, wq->head);
+ wqe->wr_id = wr->wr_id;
+ wqe->num_sge = wr->num_sge;
+ for (i = 0; i < wr->num_sge; i++)
+ wqe->sg_list[i] = wr->sg_list[i];
+ /* Make sure queue entry is written before the head index. */
+ smp_wmb();
+ wq->head = next;
+ spin_unlock_irqrestore(&qp->r_rq.lock, flags);
+ }
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_qp_rcv - processing an incoming packet on a QP
+ * @dev: the device the packet came on
+ * @hdr: the packet header
+ * @has_grh: true if the packet has a GRH
+ * @data: the packet data
+ * @tlen: the packet length
+ * @qp: the QP the packet came on
+ *
+ * This is called from ipath_ib_rcv() to process an incoming packet
+ * for the given QP.
+ * Called at interrupt level.
+ */
+static void ipath_qp_rcv(struct ipath_ibdev *dev,
+ struct ipath_ib_header *hdr, int has_grh,
+ void *data, u32 tlen, struct ipath_qp *qp)
+{
+ /* Check for valid receive state. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ dev->n_pkt_drops++;
+ return;
+ }
+
+ switch (qp->ibqp.qp_type) {
+ case IB_QPT_SMI:
+ case IB_QPT_GSI:
+ if (ib_ipath_disable_sma)
+ break;
+ /* FALLTHROUGH */
+ case IB_QPT_UD:
+ ipath_ud_rcv(dev, hdr, has_grh, data, tlen, qp);
+ break;
+
+ case IB_QPT_RC:
+ ipath_rc_rcv(dev, hdr, has_grh, data, tlen, qp);
+ break;
+
+ case IB_QPT_UC:
+ ipath_uc_rcv(dev, hdr, has_grh, data, tlen, qp);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * ipath_ib_rcv - process an incoming packet
+ * @arg: the device pointer
+ * @rhdr: the header of the packet
+ * @data: the packet data
+ * @tlen: the packet length
+ *
+ * This is called from ipath_kreceive() to process an incoming packet at
+ * interrupt level. Tlen is the length of the header + data + CRC in bytes.
+ */
+void ipath_ib_rcv(struct ipath_ibdev *dev, void *rhdr, void *data,
+ u32 tlen)
+{
+ struct ipath_ib_header *hdr = rhdr;
+ struct ipath_other_headers *ohdr;
+ struct ipath_qp *qp;
+ u32 qp_num;
+ int lnh;
+ u8 opcode;
+ u16 lid;
+
+ if (unlikely(dev == NULL))
+ goto bail;
+
+ if (unlikely(tlen < 24)) { /* LRH+BTH+CRC */
+ dev->rcv_errors++;
+ goto bail;
+ }
+
+ /* Check for a valid destination LID (see ch. 7.11.1). */
+ lid = be16_to_cpu(hdr->lrh[1]);
+ if (lid < IPATH_MULTICAST_LID_BASE) {
+ lid &= ~((1 << dev->dd->ipath_lmc) - 1);
+ if (unlikely(lid != dev->dd->ipath_lid)) {
+ dev->rcv_errors++;
+ goto bail;
+ }
+ }
+
+ /* Check for GRH */
+ lnh = be16_to_cpu(hdr->lrh[0]) & 3;
+ if (lnh == IPATH_LRH_BTH)
+ ohdr = &hdr->u.oth;
+ else if (lnh == IPATH_LRH_GRH)
+ ohdr = &hdr->u.l.oth;
+ else {
+ dev->rcv_errors++;
+ goto bail;
+ }
+
+ opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
+ dev->opstats[opcode].n_bytes += tlen;
+ dev->opstats[opcode].n_packets++;
+
+ /* Get the destination QP number. */
+ qp_num = be32_to_cpu(ohdr->bth[1]) & IPATH_QPN_MASK;
+ if (qp_num == IPATH_MULTICAST_QPN) {
+ struct ipath_mcast *mcast;
+ struct ipath_mcast_qp *p;
+
+ if (lnh != IPATH_LRH_GRH) {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ mcast = ipath_mcast_find(&hdr->u.l.grh.dgid);
+ if (mcast == NULL) {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+ dev->n_multicast_rcv++;
+ list_for_each_entry_rcu(p, &mcast->qp_list, list)
+ ipath_qp_rcv(dev, hdr, 1, data, tlen, p->qp);
+ /*
+ * Notify ipath_multicast_detach() if it is waiting for us
+ * to finish.
+ */
+ if (atomic_dec_return(&mcast->refcount) <= 1)
+ wake_up(&mcast->wait);
+ } else {
+ qp = ipath_lookup_qpn(&dev->qp_table, qp_num);
+ if (qp) {
+ dev->n_unicast_rcv++;
+ ipath_qp_rcv(dev, hdr, lnh == IPATH_LRH_GRH, data,
+ tlen, qp);
+ /*
+ * Notify ipath_destroy_qp() if it is waiting
+ * for us to finish.
+ */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ } else
+ dev->n_pkt_drops++;
+ }
+
+bail:;
+}
+
+/**
+ * ipath_ib_timer - verbs timer
+ * @arg: the device pointer
+ *
+ * This is called from ipath_do_rcv_timer() at interrupt level to check for
+ * QPs which need retransmits and to collect performance numbers.
+ */
+static void ipath_ib_timer(struct ipath_ibdev *dev)
+{
+ struct ipath_qp *resend = NULL;
+ struct ipath_qp *rnr = NULL;
+ struct list_head *last;
+ struct ipath_qp *qp;
+ unsigned long flags;
+
+ if (dev == NULL)
+ return;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ /* Start filling the next pending queue. */
+ if (++dev->pending_index >= ARRAY_SIZE(dev->pending))
+ dev->pending_index = 0;
+ /* Save any requests still in the new queue, they have timed out. */
+ last = &dev->pending[dev->pending_index];
+ while (!list_empty(last)) {
+ qp = list_entry(last->next, struct ipath_qp, timerwait);
+ list_del_init(&qp->timerwait);
+ qp->timer_next = resend;
+ resend = qp;
+ atomic_inc(&qp->refcount);
+ }
+ last = &dev->rnrwait;
+ if (!list_empty(last)) {
+ qp = list_entry(last->next, struct ipath_qp, timerwait);
+ if (--qp->s_rnr_timeout == 0) {
+ do {
+ list_del_init(&qp->timerwait);
+ qp->timer_next = rnr;
+ rnr = qp;
+ atomic_inc(&qp->refcount);
+ if (list_empty(last))
+ break;
+ qp = list_entry(last->next, struct ipath_qp,
+ timerwait);
+ } while (qp->s_rnr_timeout == 0);
+ }
+ }
+ /*
+ * We should only be in the started state if pma_sample_start != 0
+ */
+ if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED &&
+ --dev->pma_sample_start == 0) {
+ dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
+ ipath_snapshot_counters(dev->dd, &dev->ipath_sword,
+ &dev->ipath_rword,
+ &dev->ipath_spkts,
+ &dev->ipath_rpkts,
+ &dev->ipath_xmit_wait);
+ }
+ if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) {
+ if (dev->pma_sample_interval == 0) {
+ u64 ta, tb, tc, td, te;
+
+ dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
+ ipath_snapshot_counters(dev->dd, &ta, &tb,
+ &tc, &td, &te);
+
+ dev->ipath_sword = ta - dev->ipath_sword;
+ dev->ipath_rword = tb - dev->ipath_rword;
+ dev->ipath_spkts = tc - dev->ipath_spkts;
+ dev->ipath_rpkts = td - dev->ipath_rpkts;
+ dev->ipath_xmit_wait = te - dev->ipath_xmit_wait;
+ }
+ else
+ dev->pma_sample_interval--;
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+
+ /* XXX What if timer fires again while this is running? */
+ while (resend != NULL) {
+ qp = resend;
+ resend = qp->timer_next;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (qp->s_last != qp->s_tail &&
+ ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
+ dev->n_timeouts++;
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
+ }
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ }
+ while (rnr != NULL) {
+ qp = rnr;
+ rnr = qp->timer_next;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ }
+}
+
+static void update_sge(struct ipath_sge_state *ss, u32 length)
+{
+ struct ipath_sge *sge = &ss->sge;
+
+ sge->vaddr += length;
+ sge->length -= length;
+ sge->sge_length -= length;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ return;
+ sge->n = 0;
+ }
+ sge->vaddr = sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length = sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+}
+
+#ifdef __LITTLE_ENDIAN
+static inline u32 get_upper_bits(u32 data, u32 shift)
+{
+ return data >> shift;
+}
+
+static inline u32 set_upper_bits(u32 data, u32 shift)
+{
+ return data << shift;
+}
+
+static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
+{
+ data <<= ((sizeof(u32) - n) * BITS_PER_BYTE);
+ data >>= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
+ return data;
+}
+#else
+static inline u32 get_upper_bits(u32 data, u32 shift)
+{
+ return data << shift;
+}
+
+static inline u32 set_upper_bits(u32 data, u32 shift)
+{
+ return data >> shift;
+}
+
+static inline u32 clear_upper_bytes(u32 data, u32 n, u32 off)
+{
+ data >>= ((sizeof(u32) - n) * BITS_PER_BYTE);
+ data <<= ((sizeof(u32) - n - off) * BITS_PER_BYTE);
+ return data;
+}
+#endif
+
+static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
+ u32 length, unsigned flush_wc)
+{
+ u32 extra = 0;
+ u32 data = 0;
+ u32 last;
+
+ while (1) {
+ u32 len = ss->sge.length;
+ u32 off;
+
+ if (len > length)
+ len = length;
+ if (len > ss->sge.sge_length)
+ len = ss->sge.sge_length;
+ BUG_ON(len == 0);
+ /* If the source address is not aligned, try to align it. */
+ off = (unsigned long)ss->sge.vaddr & (sizeof(u32) - 1);
+ if (off) {
+ u32 *addr = (u32 *)((unsigned long)ss->sge.vaddr &
+ ~(sizeof(u32) - 1));
+ u32 v = get_upper_bits(*addr, off * BITS_PER_BYTE);
+ u32 y;
+
+ y = sizeof(u32) - off;
+ if (len > y)
+ len = y;
+ if (len + extra >= sizeof(u32)) {
+ data |= set_upper_bits(v, extra *
+ BITS_PER_BYTE);
+ len = sizeof(u32) - extra;
+ if (len == length) {
+ last = data;
+ break;
+ }
+ __raw_writel(data, piobuf);
+ piobuf++;
+ extra = 0;
+ data = 0;
+ } else {
+ /* Clear unused upper bytes */
+ data |= clear_upper_bytes(v, len, extra);
+ if (len == length) {
+ last = data;
+ break;
+ }
+ extra += len;
+ }
+ } else if (extra) {
+ /* Source address is aligned. */
+ u32 *addr = (u32 *) ss->sge.vaddr;
+ int shift = extra * BITS_PER_BYTE;
+ int ushift = 32 - shift;
+ u32 l = len;
+
+ while (l >= sizeof(u32)) {
+ u32 v = *addr;
+
+ data |= set_upper_bits(v, shift);
+ __raw_writel(data, piobuf);
+ data = get_upper_bits(v, ushift);
+ piobuf++;
+ addr++;
+ l -= sizeof(u32);
+ }
+ /*
+ * We still have 'extra' number of bytes leftover.
+ */
+ if (l) {
+ u32 v = *addr;
+
+ if (l + extra >= sizeof(u32)) {
+ data |= set_upper_bits(v, shift);
+ len -= l + extra - sizeof(u32);
+ if (len == length) {
+ last = data;
+ break;
+ }
+ __raw_writel(data, piobuf);
+ piobuf++;
+ extra = 0;
+ data = 0;
+ } else {
+ /* Clear unused upper bytes */
+ data |= clear_upper_bytes(v, l,
+ extra);
+ if (len == length) {
+ last = data;
+ break;
+ }
+ extra += l;
+ }
+ } else if (len == length) {
+ last = data;
+ break;
+ }
+ } else if (len == length) {
+ u32 w;
+
+ /*
+ * Need to round up for the last dword in the
+ * packet.
+ */
+ w = (len + 3) >> 2;
+ __iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+ piobuf += w - 1;
+ last = ((u32 *) ss->sge.vaddr)[w - 1];
+ break;
+ } else {
+ u32 w = len >> 2;
+
+ __iowrite32_copy(piobuf, ss->sge.vaddr, w);
+ piobuf += w;
+
+ extra = len & (sizeof(u32) - 1);
+ if (extra) {
+ u32 v = ((u32 *) ss->sge.vaddr)[w];
+
+ /* Clear unused upper bytes */
+ data = clear_upper_bytes(v, extra, 0);
+ }
+ }
+ update_sge(ss, len);
+ length -= len;
+ }
+ /* Update address before sending packet. */
+ update_sge(ss, length);
+ if (flush_wc) {
+ /* must flush early everything before trigger word */
+ ipath_flush_wc();
+ __raw_writel(last, piobuf);
+ /* be sure trigger word is written */
+ ipath_flush_wc();
+ } else
+ __raw_writel(last, piobuf);
+}
+
+/*
+ * Convert IB rate to delay multiplier.
+ */
+unsigned ipath_ib_rate_to_mult(enum ib_rate rate)
+{
+ switch (rate) {
+ case IB_RATE_2_5_GBPS: return 8;
+ case IB_RATE_5_GBPS: return 4;
+ case IB_RATE_10_GBPS: return 2;
+ case IB_RATE_20_GBPS: return 1;
+ default: return 0;
+ }
+}
+
+/*
+ * Convert delay multiplier to IB rate
+ */
+static enum ib_rate ipath_mult_to_ib_rate(unsigned mult)
+{
+ switch (mult) {
+ case 8: return IB_RATE_2_5_GBPS;
+ case 4: return IB_RATE_5_GBPS;
+ case 2: return IB_RATE_10_GBPS;
+ case 1: return IB_RATE_20_GBPS;
+ default: return IB_RATE_PORT_CURRENT;
+ }
+}
+
+static inline struct ipath_verbs_txreq *get_txreq(struct ipath_ibdev *dev)
+{
+ struct ipath_verbs_txreq *tx = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (!list_empty(&dev->txreq_free)) {
+ struct list_head *l = dev->txreq_free.next;
+
+ list_del(l);
+ tx = list_entry(l, struct ipath_verbs_txreq, txreq.list);
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+ return tx;
+}
+
+static inline void put_txreq(struct ipath_ibdev *dev,
+ struct ipath_verbs_txreq *tx)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ list_add(&tx->txreq.list, &dev->txreq_free);
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+}
+
+static void sdma_complete(void *cookie, int status)
+{
+ struct ipath_verbs_txreq *tx = cookie;
+ struct ipath_qp *qp = tx->qp;
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ unsigned long flags;
+ enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
+ IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
+
+ if (atomic_dec_and_test(&qp->s_dma_busy)) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (tx->wqe)
+ ipath_send_complete(qp, tx->wqe, ibs);
+ if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
+ qp->s_last != qp->s_head) ||
+ (qp->s_flags & IPATH_S_WAIT_DMA))
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ wake_up(&qp->wait_dma);
+ } else if (tx->wqe) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ ipath_send_complete(qp, tx->wqe, ibs);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ }
+
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
+ kfree(tx->txreq.map_addr);
+ put_txreq(dev, tx);
+
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+}
+
+static void decrement_dma_busy(struct ipath_qp *qp)
+{
+ unsigned long flags;
+
+ if (atomic_dec_and_test(&qp->s_dma_busy)) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
+ qp->s_last != qp->s_head) ||
+ (qp->s_flags & IPATH_S_WAIT_DMA))
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ wake_up(&qp->wait_dma);
+ }
+}
+
+/*
+ * Compute the number of clock cycles of delay before sending the next packet.
+ * The multipliers reflect the number of clocks for the fastest rate so
+ * one tick at 4xDDR is 8 ticks at 1xSDR.
+ * If the destination port will take longer to receive a packet than
+ * the outgoing link can send it, we need to delay sending the next packet
+ * by the difference in time it takes the receiver to receive and the sender
+ * to send this packet.
+ * Note that this delay is always correct for UC and RC but not always
+ * optimal for UD. For UD, the destination HCA can be different for each
+ * packet, in which case, we could send packets to a different destination
+ * while "waiting" for the delay. The overhead for doing this without
+ * HW support is more than just paying the cost of delaying some packets
+ * unnecessarily.
+ */
+static inline unsigned ipath_pkt_delay(u32 plen, u8 snd_mult, u8 rcv_mult)
+{
+ return (rcv_mult > snd_mult) ?
+ (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
+}
+
+static int ipath_verbs_send_dma(struct ipath_qp *qp,
+ struct ipath_ib_header *hdr, u32 hdrwords,
+ struct ipath_sge_state *ss, u32 len,
+ u32 plen, u32 dwords)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_devdata *dd = dev->dd;
+ struct ipath_verbs_txreq *tx;
+ u32 *piobuf;
+ u32 control;
+ u32 ndesc;
+ int ret;
+
+ tx = qp->s_tx;
+ if (tx) {
+ qp->s_tx = NULL;
+ /* resend previously constructed packet */
+ atomic_inc(&qp->s_dma_busy);
+ ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx);
+ if (ret) {
+ qp->s_tx = tx;
+ decrement_dma_busy(qp);
+ }
+ goto bail;
+ }
+
+ tx = get_txreq(dev);
+ if (!tx) {
+ ret = -EBUSY;
+ goto bail;
+ }
+
+ /*
+ * Get the saved delay count we computed for the previous packet
+ * and save the delay count for this packet to be used next time
+ * we get here.
+ */
+ control = qp->s_pkt_delay;
+ qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
+
+ tx->qp = qp;
+ atomic_inc(&qp->refcount);
+ tx->wqe = qp->s_wqe;
+ tx->txreq.callback = sdma_complete;
+ tx->txreq.callback_cookie = tx;
+ tx->txreq.flags = IPATH_SDMA_TXREQ_F_HEADTOHOST |
+ IPATH_SDMA_TXREQ_F_INTREQ | IPATH_SDMA_TXREQ_F_FREEDESC;
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_USELARGEBUF;
+
+ /* VL15 packets bypass credit check */
+ if ((be16_to_cpu(hdr->lrh[0]) >> 12) == 15) {
+ control |= 1ULL << 31;
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_VL15;
+ }
+
+ if (len) {
+ /*
+ * Don't try to DMA if it takes more descriptors than
+ * the queue holds.
+ */
+ ndesc = ipath_count_sge(ss, len);
+ if (ndesc >= dd->ipath_sdma_descq_cnt)
+ ndesc = 0;
+ } else
+ ndesc = 1;
+ if (ndesc) {
+ tx->hdr.pbc[0] = cpu_to_le32(plen);
+ tx->hdr.pbc[1] = cpu_to_le32(control);
+ memcpy(&tx->hdr.hdr, hdr, hdrwords << 2);
+ tx->txreq.sg_count = ndesc;
+ tx->map_len = (hdrwords + 2) << 2;
+ tx->txreq.map_addr = &tx->hdr;
+ atomic_inc(&qp->s_dma_busy);
+ ret = ipath_sdma_verbs_send(dd, ss, dwords, tx);
+ if (ret) {
+ /* save ss and length in dwords */
+ tx->ss = ss;
+ tx->len = dwords;
+ qp->s_tx = tx;
+ decrement_dma_busy(qp);
+ }
+ goto bail;
+ }
+
+ /* Allocate a buffer and copy the header and payload to it. */
+ tx->map_len = (plen + 1) << 2;
+ piobuf = kmalloc(tx->map_len, GFP_ATOMIC);
+ if (unlikely(piobuf == NULL)) {
+ ret = -EBUSY;
+ goto err_tx;
+ }
+ tx->txreq.map_addr = piobuf;
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_FREEBUF;
+ tx->txreq.sg_count = 1;
+
+ *piobuf++ = (__force u32) cpu_to_le32(plen);
+ *piobuf++ = (__force u32) cpu_to_le32(control);
+ memcpy(piobuf, hdr, hdrwords << 2);
+ ipath_copy_from_sge(piobuf + hdrwords, ss, len);
+
+ atomic_inc(&qp->s_dma_busy);
+ ret = ipath_sdma_verbs_send(dd, NULL, 0, tx);
+ /*
+ * If we couldn't queue the DMA request, save the info
+ * and try again later rather than destroying the
+ * buffer and undoing the side effects of the copy.
+ */
+ if (ret) {
+ tx->ss = NULL;
+ tx->len = 0;
+ qp->s_tx = tx;
+ decrement_dma_busy(qp);
+ }
+ dev->n_unaligned++;
+ goto bail;
+
+err_tx:
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ put_txreq(dev, tx);
+bail:
+ return ret;
+}
+
+static int ipath_verbs_send_pio(struct ipath_qp *qp,
+ struct ipath_ib_header *ibhdr, u32 hdrwords,
+ struct ipath_sge_state *ss, u32 len,
+ u32 plen, u32 dwords)
+{
+ struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
+ u32 *hdr = (u32 *) ibhdr;
+ u32 __iomem *piobuf;
+ unsigned flush_wc;
+ u32 control;
+ int ret;
+ unsigned long flags;
+
+ piobuf = ipath_getpiobuf(dd, plen, NULL);
+ if (unlikely(piobuf == NULL)) {
+ ret = -EBUSY;
+ goto bail;
+ }
+
+ /*
+ * Get the saved delay count we computed for the previous packet
+ * and save the delay count for this packet to be used next time
+ * we get here.
+ */
+ control = qp->s_pkt_delay;
+ qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
+
+ /* VL15 packets bypass credit check */
+ if ((be16_to_cpu(ibhdr->lrh[0]) >> 12) == 15)
+ control |= 1ULL << 31;
+
+ /*
+ * Write the length to the control qword plus any needed flags.
+ * We have to flush after the PBC for correctness on some cpus
+ * or WC buffer can be written out of order.
+ */
+ writeq(((u64) control << 32) | plen, piobuf);
+ piobuf += 2;
+
+ flush_wc = dd->ipath_flags & IPATH_PIO_FLUSH_WC;
+ if (len == 0) {
+ /*
+ * If there is just the header portion, must flush before
+ * writing last word of header for correctness, and after
+ * the last header word (trigger word).
+ */
+ if (flush_wc) {
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf, hdr, hdrwords - 1);
+ ipath_flush_wc();
+ __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords - 1);
+ ipath_flush_wc();
+ } else
+ __iowrite32_copy(piobuf, hdr, hdrwords);
+ goto done;
+ }
+
+ if (flush_wc)
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf, hdr, hdrwords);
+ piobuf += hdrwords;
+
+ /* The common case is aligned and contained in one segment. */
+ if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
+ !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
+ u32 *addr = (u32 *) ss->sge.vaddr;
+
+ /* Update address before sending packet. */
+ update_sge(ss, len);
+ if (flush_wc) {
+ __iowrite32_copy(piobuf, addr, dwords - 1);
+ /* must flush early everything before trigger word */
+ ipath_flush_wc();
+ __raw_writel(addr[dwords - 1], piobuf + dwords - 1);
+ /* be sure trigger word is written */
+ ipath_flush_wc();
+ } else
+ __iowrite32_copy(piobuf, addr, dwords);
+ goto done;
+ }
+ copy_io(piobuf, ss, len, flush_wc);
+done:
+ if (qp->s_wqe) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ }
+ ret = 0;
+bail:
+ return ret;
+}
+
+/**
+ * ipath_verbs_send - send a packet
+ * @qp: the QP to send on
+ * @hdr: the packet header
+ * @hdrwords: the number of 32-bit words in the header
+ * @ss: the SGE to send
+ * @len: the length of the packet in bytes
+ */
+int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
+ u32 hdrwords, struct ipath_sge_state *ss, u32 len)
+{
+ struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
+ u32 plen;
+ int ret;
+ u32 dwords = (len + 3) >> 2;
+
+ /*
+ * Calculate the send buffer trigger address.
+ * The +1 counts for the pbc control dword following the pbc length.
+ */
+ plen = hdrwords + dwords + 1;
+
+ /*
+ * VL15 packets (IB_QPT_SMI) will always use PIO, so we
+ * can defer SDMA restart until link goes ACTIVE without
+ * worrying about just how we got there.
+ */
+ if (qp->ibqp.qp_type == IB_QPT_SMI ||
+ !(dd->ipath_flags & IPATH_HAS_SEND_DMA))
+ ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
+ plen, dwords);
+ else
+ ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
+ plen, dwords);
+
+ return ret;
+}
+
+int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
+ u64 *rwords, u64 *spkts, u64 *rpkts,
+ u64 *xmit_wait)
+{
+ int ret;
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ /* no hardware, freeze, etc. */
+ ret = -EINVAL;
+ goto bail;
+ }
+ *swords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordsendcnt);
+ *rwords = ipath_snap_cntr(dd, dd->ipath_cregs->cr_wordrcvcnt);
+ *spkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktsendcnt);
+ *rpkts = ipath_snap_cntr(dd, dd->ipath_cregs->cr_pktrcvcnt);
+ *xmit_wait = ipath_snap_cntr(dd, dd->ipath_cregs->cr_sendstallcnt);
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_get_counters - get various chip counters
+ * @dd: the infinipath device
+ * @cntrs: counters are placed here
+ *
+ * Return the counters needed by recv_pma_get_portcounters().
+ */
+int ipath_get_counters(struct ipath_devdata *dd,
+ struct ipath_verbs_counters *cntrs)
+{
+ struct ipath_cregs const *crp = dd->ipath_cregs;
+ int ret;
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ /* no hardware, freeze, etc. */
+ ret = -EINVAL;
+ goto bail;
+ }
+ cntrs->symbol_error_counter =
+ ipath_snap_cntr(dd, crp->cr_ibsymbolerrcnt);
+ cntrs->link_error_recovery_counter =
+ ipath_snap_cntr(dd, crp->cr_iblinkerrrecovcnt);
+ /*
+ * The link downed counter counts when the other side downs the
+ * connection. We add in the number of times we downed the link
+ * due to local link integrity errors to compensate.
+ */
+ cntrs->link_downed_counter =
+ ipath_snap_cntr(dd, crp->cr_iblinkdowncnt);
+ cntrs->port_rcv_errors =
+ ipath_snap_cntr(dd, crp->cr_rxdroppktcnt) +
+ ipath_snap_cntr(dd, crp->cr_rcvovflcnt) +
+ ipath_snap_cntr(dd, crp->cr_portovflcnt) +
+ ipath_snap_cntr(dd, crp->cr_err_rlencnt) +
+ ipath_snap_cntr(dd, crp->cr_invalidrlencnt) +
+ ipath_snap_cntr(dd, crp->cr_errlinkcnt) +
+ ipath_snap_cntr(dd, crp->cr_erricrccnt) +
+ ipath_snap_cntr(dd, crp->cr_errvcrccnt) +
+ ipath_snap_cntr(dd, crp->cr_errlpcrccnt) +
+ ipath_snap_cntr(dd, crp->cr_badformatcnt) +
+ dd->ipath_rxfc_unsupvl_errs;
+ if (crp->cr_rxotherlocalphyerrcnt)
+ cntrs->port_rcv_errors +=
+ ipath_snap_cntr(dd, crp->cr_rxotherlocalphyerrcnt);
+ if (crp->cr_rxvlerrcnt)
+ cntrs->port_rcv_errors +=
+ ipath_snap_cntr(dd, crp->cr_rxvlerrcnt);
+ cntrs->port_rcv_remphys_errors =
+ ipath_snap_cntr(dd, crp->cr_rcvebpcnt);
+ cntrs->port_xmit_discards = ipath_snap_cntr(dd, crp->cr_unsupvlcnt);
+ cntrs->port_xmit_data = ipath_snap_cntr(dd, crp->cr_wordsendcnt);
+ cntrs->port_rcv_data = ipath_snap_cntr(dd, crp->cr_wordrcvcnt);
+ cntrs->port_xmit_packets = ipath_snap_cntr(dd, crp->cr_pktsendcnt);
+ cntrs->port_rcv_packets = ipath_snap_cntr(dd, crp->cr_pktrcvcnt);
+ cntrs->local_link_integrity_errors =
+ crp->cr_locallinkintegrityerrcnt ?
+ ipath_snap_cntr(dd, crp->cr_locallinkintegrityerrcnt) :
+ ((dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
+ dd->ipath_lli_errs : dd->ipath_lli_errors);
+ cntrs->excessive_buffer_overrun_errors =
+ crp->cr_excessbufferovflcnt ?
+ ipath_snap_cntr(dd, crp->cr_excessbufferovflcnt) :
+ dd->ipath_overrun_thresh_errs;
+ cntrs->vl15_dropped = crp->cr_vl15droppedpktcnt ?
+ ipath_snap_cntr(dd, crp->cr_vl15droppedpktcnt) : 0;
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_ib_piobufavail - callback when a PIO buffer is available
+ * @arg: the device pointer
+ *
+ * This is called from ipath_intr() at interrupt level when a PIO buffer is
+ * available after ipath_verbs_send() returned an error that no buffers were
+ * available. Return 1 if we consumed all the PIO buffers and we still have
+ * QPs waiting for buffers (for now, just restart the send tasklet and
+ * return zero).
+ */
+int ipath_ib_piobufavail(struct ipath_ibdev *dev)
+{
+ struct list_head *list;
+ struct ipath_qp *qplist;
+ struct ipath_qp *qp;
+ unsigned long flags;
+
+ if (dev == NULL)
+ goto bail;
+
+ list = &dev->piowait;
+ qplist = NULL;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ while (!list_empty(list)) {
+ qp = list_entry(list->next, struct ipath_qp, piowait);
+ list_del_init(&qp->piowait);
+ qp->pio_next = qplist;
+ qplist = qp;
+ atomic_inc(&qp->refcount);
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+
+ while (qplist != NULL) {
+ qp = qplist;
+ qplist = qp->pio_next;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ }
+
+bail:
+ return 0;
+}
+
+static int ipath_query_device(struct ib_device *ibdev, struct ib_device_attr *props,
+ struct ib_udata *uhw)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+
+ if (uhw->inlen || uhw->outlen)
+ return -EINVAL;
+
+ memset(props, 0, sizeof(*props));
+
+ props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
+ IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
+ IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
+ IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
+ props->page_size_cap = PAGE_SIZE;
+ props->vendor_id =
+ IPATH_SRC_OUI_1 << 16 | IPATH_SRC_OUI_2 << 8 | IPATH_SRC_OUI_3;
+ props->vendor_part_id = dev->dd->ipath_deviceid;
+ props->hw_ver = dev->dd->ipath_pcirev;
+
+ props->sys_image_guid = dev->sys_image_guid;
+
+ props->max_mr_size = ~0ull;
+ props->max_qp = ib_ipath_max_qps;
+ props->max_qp_wr = ib_ipath_max_qp_wrs;
+ props->max_sge = ib_ipath_max_sges;
+ props->max_cq = ib_ipath_max_cqs;
+ props->max_ah = ib_ipath_max_ahs;
+ props->max_cqe = ib_ipath_max_cqes;
+ props->max_mr = dev->lk_table.max;
+ props->max_fmr = dev->lk_table.max;
+ props->max_map_per_fmr = 32767;
+ props->max_pd = ib_ipath_max_pds;
+ props->max_qp_rd_atom = IPATH_MAX_RDMA_ATOMIC;
+ props->max_qp_init_rd_atom = 255;
+ /* props->max_res_rd_atom */
+ props->max_srq = ib_ipath_max_srqs;
+ props->max_srq_wr = ib_ipath_max_srq_wrs;
+ props->max_srq_sge = ib_ipath_max_srq_sges;
+ /* props->local_ca_ack_delay */
+ props->atomic_cap = IB_ATOMIC_GLOB;
+ props->max_pkeys = ipath_get_npkeys(dev->dd);
+ props->max_mcast_grp = ib_ipath_max_mcast_grps;
+ props->max_mcast_qp_attach = ib_ipath_max_mcast_qp_attached;
+ props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
+ props->max_mcast_grp;
+
+ return 0;
+}
+
+const u8 ipath_cvt_physportstate[32] = {
+ [INFINIPATH_IBCS_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
+ [INFINIPATH_IBCS_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
+ [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
+ [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
+ [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
+ [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
+ [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] =
+ IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+ [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
+ [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
+};
+
+u32 ipath_get_cr_errpkey(struct ipath_devdata *dd)
+{
+ return ipath_read_creg32(dd, dd->ipath_cregs->cr_errpkey);
+}
+
+static int ipath_query_port(struct ib_device *ibdev,
+ u8 port, struct ib_port_attr *props)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_devdata *dd = dev->dd;
+ enum ib_mtu mtu;
+ u16 lid = dd->ipath_lid;
+ u64 ibcstat;
+
+ memset(props, 0, sizeof(*props));
+ props->lid = lid ? lid : be16_to_cpu(IB_LID_PERMISSIVE);
+ props->lmc = dd->ipath_lmc;
+ props->sm_lid = dev->sm_lid;
+ props->sm_sl = dev->sm_sl;
+ ibcstat = dd->ipath_lastibcstat;
+ /* map LinkState to IB portinfo values. */
+ props->state = ipath_ib_linkstate(dd, ibcstat) + 1;
+
+ /* See phys_state_show() */
+ props->phys_state = /* MEA: assumes shift == 0 */
+ ipath_cvt_physportstate[dd->ipath_lastibcstat &
+ dd->ibcs_lts_mask];
+ props->port_cap_flags = dev->port_cap_flags;
+ props->gid_tbl_len = 1;
+ props->max_msg_sz = 0x80000000;
+ props->pkey_tbl_len = ipath_get_npkeys(dd);
+ props->bad_pkey_cntr = ipath_get_cr_errpkey(dd) -
+ dev->z_pkey_violations;
+ props->qkey_viol_cntr = dev->qkey_violations;
+ props->active_width = dd->ipath_link_width_active;
+ /* See rate_show() */
+ props->active_speed = dd->ipath_link_speed_active;
+ props->max_vl_num = 1; /* VLCap = VL0 */
+ props->init_type_reply = 0;
+
+ props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
+ switch (dd->ipath_ibmtu) {
+ case 4096:
+ mtu = IB_MTU_4096;
+ break;
+ case 2048:
+ mtu = IB_MTU_2048;
+ break;
+ case 1024:
+ mtu = IB_MTU_1024;
+ break;
+ case 512:
+ mtu = IB_MTU_512;
+ break;
+ case 256:
+ mtu = IB_MTU_256;
+ break;
+ default:
+ mtu = IB_MTU_2048;
+ }
+ props->active_mtu = mtu;
+ props->subnet_timeout = dev->subnet_timeout;
+
+ return 0;
+}
+
+static int ipath_modify_device(struct ib_device *device,
+ int device_modify_mask,
+ struct ib_device_modify *device_modify)
+{
+ int ret;
+
+ if (device_modify_mask & ~(IB_DEVICE_MODIFY_SYS_IMAGE_GUID |
+ IB_DEVICE_MODIFY_NODE_DESC)) {
+ ret = -EOPNOTSUPP;
+ goto bail;
+ }
+
+ if (device_modify_mask & IB_DEVICE_MODIFY_NODE_DESC)
+ memcpy(device->node_desc, device_modify->node_desc, 64);
+
+ if (device_modify_mask & IB_DEVICE_MODIFY_SYS_IMAGE_GUID)
+ to_idev(device)->sys_image_guid =
+ cpu_to_be64(device_modify->sys_image_guid);
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+static int ipath_modify_port(struct ib_device *ibdev,
+ u8 port, int port_modify_mask,
+ struct ib_port_modify *props)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+
+ dev->port_cap_flags |= props->set_port_cap_mask;
+ dev->port_cap_flags &= ~props->clr_port_cap_mask;
+ if (port_modify_mask & IB_PORT_SHUTDOWN)
+ ipath_set_linkstate(dev->dd, IPATH_IB_LINKDOWN);
+ if (port_modify_mask & IB_PORT_RESET_QKEY_CNTR)
+ dev->qkey_violations = 0;
+ return 0;
+}
+
+static int ipath_query_gid(struct ib_device *ibdev, u8 port,
+ int index, union ib_gid *gid)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ int ret;
+
+ if (index >= 1) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ gid->global.subnet_prefix = dev->gid_prefix;
+ gid->global.interface_id = dev->dd->ipath_guid;
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+static struct ib_pd *ipath_alloc_pd(struct ib_device *ibdev,
+ struct ib_ucontext *context,
+ struct ib_udata *udata)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ struct ipath_pd *pd;
+ struct ib_pd *ret;
+
+ /*
+ * This is actually totally arbitrary. Some correctness tests
+ * assume there's a maximum number of PDs that can be allocated.
+ * We don't actually have this limit, but we fail the test if
+ * we allow allocations of more than we report for this value.
+ */
+
+ pd = kmalloc(sizeof *pd, GFP_KERNEL);
+ if (!pd) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ spin_lock(&dev->n_pds_lock);
+ if (dev->n_pds_allocated == ib_ipath_max_pds) {
+ spin_unlock(&dev->n_pds_lock);
+ kfree(pd);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ dev->n_pds_allocated++;
+ spin_unlock(&dev->n_pds_lock);
+
+ /* ib_alloc_pd() will initialize pd->ibpd. */
+ pd->user = udata != NULL;
+
+ ret = &pd->ibpd;
+
+bail:
+ return ret;
+}
+
+static int ipath_dealloc_pd(struct ib_pd *ibpd)
+{
+ struct ipath_pd *pd = to_ipd(ibpd);
+ struct ipath_ibdev *dev = to_idev(ibpd->device);
+
+ spin_lock(&dev->n_pds_lock);
+ dev->n_pds_allocated--;
+ spin_unlock(&dev->n_pds_lock);
+
+ kfree(pd);
+
+ return 0;
+}
+
+/**
+ * ipath_create_ah - create an address handle
+ * @pd: the protection domain
+ * @ah_attr: the attributes of the AH
+ *
+ * This may be called from interrupt context.
+ */
+static struct ib_ah *ipath_create_ah(struct ib_pd *pd,
+ struct ib_ah_attr *ah_attr)
+{
+ struct ipath_ah *ah;
+ struct ib_ah *ret;
+ struct ipath_ibdev *dev = to_idev(pd->device);
+ unsigned long flags;
+
+ /* A multicast address requires a GRH (see ch. 8.4.1). */
+ if (ah_attr->dlid >= IPATH_MULTICAST_LID_BASE &&
+ ah_attr->dlid != IPATH_PERMISSIVE_LID &&
+ !(ah_attr->ah_flags & IB_AH_GRH)) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if (ah_attr->dlid == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ if (ah_attr->port_num < 1 ||
+ ah_attr->port_num > pd->device->phys_port_cnt) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+
+ ah = kmalloc(sizeof *ah, GFP_ATOMIC);
+ if (!ah) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ spin_lock_irqsave(&dev->n_ahs_lock, flags);
+ if (dev->n_ahs_allocated == ib_ipath_max_ahs) {
+ spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
+ kfree(ah);
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ dev->n_ahs_allocated++;
+ spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
+
+ /* ib_create_ah() will initialize ah->ibah. */
+ ah->attr = *ah_attr;
+ ah->attr.static_rate = ipath_ib_rate_to_mult(ah_attr->static_rate);
+
+ ret = &ah->ibah;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_destroy_ah - destroy an address handle
+ * @ibah: the AH to destroy
+ *
+ * This may be called from interrupt context.
+ */
+static int ipath_destroy_ah(struct ib_ah *ibah)
+{
+ struct ipath_ibdev *dev = to_idev(ibah->device);
+ struct ipath_ah *ah = to_iah(ibah);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->n_ahs_lock, flags);
+ dev->n_ahs_allocated--;
+ spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
+
+ kfree(ah);
+
+ return 0;
+}
+
+static int ipath_query_ah(struct ib_ah *ibah, struct ib_ah_attr *ah_attr)
+{
+ struct ipath_ah *ah = to_iah(ibah);
+
+ *ah_attr = ah->attr;
+ ah_attr->static_rate = ipath_mult_to_ib_rate(ah->attr.static_rate);
+
+ return 0;
+}
+
+/**
+ * ipath_get_npkeys - return the size of the PKEY table for port 0
+ * @dd: the infinipath device
+ */
+unsigned ipath_get_npkeys(struct ipath_devdata *dd)
+{
+ return ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys);
+}
+
+/**
+ * ipath_get_pkey - return the indexed PKEY from the port PKEY table
+ * @dd: the infinipath device
+ * @index: the PKEY index
+ */
+unsigned ipath_get_pkey(struct ipath_devdata *dd, unsigned index)
+{
+ unsigned ret;
+
+ /* always a kernel port, no locking needed */
+ if (index >= ARRAY_SIZE(dd->ipath_pd[0]->port_pkeys))
+ ret = 0;
+ else
+ ret = dd->ipath_pd[0]->port_pkeys[index];
+
+ return ret;
+}
+
+static int ipath_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
+ u16 *pkey)
+{
+ struct ipath_ibdev *dev = to_idev(ibdev);
+ int ret;
+
+ if (index >= ipath_get_npkeys(dev->dd)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ *pkey = ipath_get_pkey(dev->dd, index);
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_alloc_ucontext - allocate a ucontest
+ * @ibdev: the infiniband device
+ * @udata: not used by the InfiniPath driver
+ */
+
+static struct ib_ucontext *ipath_alloc_ucontext(struct ib_device *ibdev,
+ struct ib_udata *udata)
+{
+ struct ipath_ucontext *context;
+ struct ib_ucontext *ret;
+
+ context = kmalloc(sizeof *context, GFP_KERNEL);
+ if (!context) {
+ ret = ERR_PTR(-ENOMEM);
+ goto bail;
+ }
+
+ ret = &context->ibucontext;
+
+bail:
+ return ret;
+}
+
+static int ipath_dealloc_ucontext(struct ib_ucontext *context)
+{
+ kfree(to_iucontext(context));
+ return 0;
+}
+
+static int ipath_verbs_register_sysfs(struct ib_device *dev);
+
+static void __verbs_timer(unsigned long arg)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) arg;
+
+ /* Handle verbs layer timeouts. */
+ ipath_ib_timer(dd->verbs_dev);
+
+ mod_timer(&dd->verbs_timer, jiffies + 1);
+}
+
+static int enable_timer(struct ipath_devdata *dd)
+{
+ /*
+ * Early chips had a design flaw where the chip and kernel idea
+ * of the tail register don't always agree, and therefore we won't
+ * get an interrupt on the next packet received.
+ * If the board supports per packet receive interrupts, use it.
+ * Otherwise, the timer function periodically checks for packets
+ * to cover this case.
+ * Either way, the timer is needed for verbs layer related
+ * processing.
+ */
+ if (dd->ipath_flags & IPATH_GPIO_INTR) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_debugportselect,
+ 0x2074076542310ULL);
+ /* Enable GPIO bit 2 interrupt */
+ dd->ipath_gpio_mask |= (u64) (1 << IPATH_GPIO_PORT0_BIT);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
+ dd->ipath_gpio_mask);
+ }
+
+ init_timer(&dd->verbs_timer);
+ dd->verbs_timer.function = __verbs_timer;
+ dd->verbs_timer.data = (unsigned long)dd;
+ dd->verbs_timer.expires = jiffies + 1;
+ add_timer(&dd->verbs_timer);
+
+ return 0;
+}
+
+static int disable_timer(struct ipath_devdata *dd)
+{
+ /* Disable GPIO bit 2 interrupt */
+ if (dd->ipath_flags & IPATH_GPIO_INTR) {
+ /* Disable GPIO bit 2 interrupt */
+ dd->ipath_gpio_mask &= ~((u64) (1 << IPATH_GPIO_PORT0_BIT));
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
+ dd->ipath_gpio_mask);
+ /*
+ * We might want to undo changes to debugportselect,
+ * but how?
+ */
+ }
+
+ del_timer_sync(&dd->verbs_timer);
+
+ return 0;
+}
+
+static int ipath_port_immutable(struct ib_device *ibdev, u8 port_num,
+ struct ib_port_immutable *immutable)
+{
+ struct ib_port_attr attr;
+ int err;
+
+ err = ipath_query_port(ibdev, port_num, &attr);
+ if (err)
+ return err;
+
+ immutable->pkey_tbl_len = attr.pkey_tbl_len;
+ immutable->gid_tbl_len = attr.gid_tbl_len;
+ immutable->core_cap_flags = RDMA_CORE_PORT_IBA_IB;
+ immutable->max_mad_size = IB_MGMT_MAD_SIZE;
+
+ return 0;
+}
+
+/**
+ * ipath_register_ib_device - register our device with the infiniband core
+ * @dd: the device data structure
+ * Return the allocated ipath_ibdev pointer or NULL on error.
+ */
+int ipath_register_ib_device(struct ipath_devdata *dd)
+{
+ struct ipath_verbs_counters cntrs;
+ struct ipath_ibdev *idev;
+ struct ib_device *dev;
+ struct ipath_verbs_txreq *tx;
+ unsigned i;
+ int ret;
+
+ idev = (struct ipath_ibdev *)ib_alloc_device(sizeof *idev);
+ if (idev == NULL) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+
+ dev = &idev->ibdev;
+
+ if (dd->ipath_sdma_descq_cnt) {
+ tx = kmalloc(dd->ipath_sdma_descq_cnt * sizeof *tx,
+ GFP_KERNEL);
+ if (tx == NULL) {
+ ret = -ENOMEM;
+ goto err_tx;
+ }
+ } else
+ tx = NULL;
+ idev->txreq_bufs = tx;
+
+ /* Only need to initialize non-zero fields. */
+ spin_lock_init(&idev->n_pds_lock);
+ spin_lock_init(&idev->n_ahs_lock);
+ spin_lock_init(&idev->n_cqs_lock);
+ spin_lock_init(&idev->n_qps_lock);
+ spin_lock_init(&idev->n_srqs_lock);
+ spin_lock_init(&idev->n_mcast_grps_lock);
+
+ spin_lock_init(&idev->qp_table.lock);
+ spin_lock_init(&idev->lk_table.lock);
+ idev->sm_lid = be16_to_cpu(IB_LID_PERMISSIVE);
+ /* Set the prefix to the default value (see ch. 4.1.1) */
+ idev->gid_prefix = cpu_to_be64(0xfe80000000000000ULL);
+
+ ret = ipath_init_qp_table(idev, ib_ipath_qp_table_size);
+ if (ret)
+ goto err_qp;
+
+ /*
+ * The top ib_ipath_lkey_table_size bits are used to index the
+ * table. The lower 8 bits can be owned by the user (copied from
+ * the LKEY). The remaining bits act as a generation number or tag.
+ */
+ idev->lk_table.max = 1 << ib_ipath_lkey_table_size;
+ idev->lk_table.table = kzalloc(idev->lk_table.max *
+ sizeof(*idev->lk_table.table),
+ GFP_KERNEL);
+ if (idev->lk_table.table == NULL) {
+ ret = -ENOMEM;
+ goto err_lk;
+ }
+ INIT_LIST_HEAD(&idev->pending_mmaps);
+ spin_lock_init(&idev->pending_lock);
+ idev->mmap_offset = PAGE_SIZE;
+ spin_lock_init(&idev->mmap_offset_lock);
+ INIT_LIST_HEAD(&idev->pending[0]);
+ INIT_LIST_HEAD(&idev->pending[1]);
+ INIT_LIST_HEAD(&idev->pending[2]);
+ INIT_LIST_HEAD(&idev->piowait);
+ INIT_LIST_HEAD(&idev->rnrwait);
+ INIT_LIST_HEAD(&idev->txreq_free);
+ idev->pending_index = 0;
+ idev->port_cap_flags =
+ IB_PORT_SYS_IMAGE_GUID_SUP | IB_PORT_CLIENT_REG_SUP;
+ if (dd->ipath_flags & IPATH_HAS_LINK_LATENCY)
+ idev->port_cap_flags |= IB_PORT_LINK_LATENCY_SUP;
+ idev->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA;
+ idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA;
+ idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS;
+ idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS;
+ idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT;
+
+ /* Snapshot current HW counters to "clear" them. */
+ ipath_get_counters(dd, &cntrs);
+ idev->z_symbol_error_counter = cntrs.symbol_error_counter;
+ idev->z_link_error_recovery_counter =
+ cntrs.link_error_recovery_counter;
+ idev->z_link_downed_counter = cntrs.link_downed_counter;
+ idev->z_port_rcv_errors = cntrs.port_rcv_errors;
+ idev->z_port_rcv_remphys_errors =
+ cntrs.port_rcv_remphys_errors;
+ idev->z_port_xmit_discards = cntrs.port_xmit_discards;
+ idev->z_port_xmit_data = cntrs.port_xmit_data;
+ idev->z_port_rcv_data = cntrs.port_rcv_data;
+ idev->z_port_xmit_packets = cntrs.port_xmit_packets;
+ idev->z_port_rcv_packets = cntrs.port_rcv_packets;
+ idev->z_local_link_integrity_errors =
+ cntrs.local_link_integrity_errors;
+ idev->z_excessive_buffer_overrun_errors =
+ cntrs.excessive_buffer_overrun_errors;
+ idev->z_vl15_dropped = cntrs.vl15_dropped;
+
+ for (i = 0; i < dd->ipath_sdma_descq_cnt; i++, tx++)
+ list_add(&tx->txreq.list, &idev->txreq_free);
+
+ /*
+ * The system image GUID is supposed to be the same for all
+ * IB HCAs in a single system but since there can be other
+ * device types in the system, we can't be sure this is unique.
+ */
+ if (!sys_image_guid)
+ sys_image_guid = dd->ipath_guid;
+ idev->sys_image_guid = sys_image_guid;
+ idev->ib_unit = dd->ipath_unit;
+ idev->dd = dd;
+
+ strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+ dev->owner = THIS_MODULE;
+ dev->node_guid = dd->ipath_guid;
+ dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
+ dev->uverbs_cmd_mask =
+ (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
+ (1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
+ (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_AH) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_AH) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_AH) |
+ (1ull << IB_USER_VERBS_CMD_REG_MR) |
+ (1ull << IB_USER_VERBS_CMD_DEREG_MR) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
+ (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
+ (1ull << IB_USER_VERBS_CMD_POLL_CQ) |
+ (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_QP) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_QP) |
+ (1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
+ (1ull << IB_USER_VERBS_CMD_POST_SEND) |
+ (1ull << IB_USER_VERBS_CMD_POST_RECV) |
+ (1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
+ (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
+ (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_POST_SRQ_RECV);
+ dev->node_type = RDMA_NODE_IB_CA;
+ dev->phys_port_cnt = 1;
+ dev->num_comp_vectors = 1;
+ dev->dma_device = &dd->pcidev->dev;
+ dev->query_device = ipath_query_device;
+ dev->modify_device = ipath_modify_device;
+ dev->query_port = ipath_query_port;
+ dev->modify_port = ipath_modify_port;
+ dev->query_pkey = ipath_query_pkey;
+ dev->query_gid = ipath_query_gid;
+ dev->alloc_ucontext = ipath_alloc_ucontext;
+ dev->dealloc_ucontext = ipath_dealloc_ucontext;
+ dev->alloc_pd = ipath_alloc_pd;
+ dev->dealloc_pd = ipath_dealloc_pd;
+ dev->create_ah = ipath_create_ah;
+ dev->destroy_ah = ipath_destroy_ah;
+ dev->query_ah = ipath_query_ah;
+ dev->create_srq = ipath_create_srq;
+ dev->modify_srq = ipath_modify_srq;
+ dev->query_srq = ipath_query_srq;
+ dev->destroy_srq = ipath_destroy_srq;
+ dev->create_qp = ipath_create_qp;
+ dev->modify_qp = ipath_modify_qp;
+ dev->query_qp = ipath_query_qp;
+ dev->destroy_qp = ipath_destroy_qp;
+ dev->post_send = ipath_post_send;
+ dev->post_recv = ipath_post_receive;
+ dev->post_srq_recv = ipath_post_srq_receive;
+ dev->create_cq = ipath_create_cq;
+ dev->destroy_cq = ipath_destroy_cq;
+ dev->resize_cq = ipath_resize_cq;
+ dev->poll_cq = ipath_poll_cq;
+ dev->req_notify_cq = ipath_req_notify_cq;
+ dev->get_dma_mr = ipath_get_dma_mr;
+ dev->reg_phys_mr = ipath_reg_phys_mr;
+ dev->reg_user_mr = ipath_reg_user_mr;
+ dev->dereg_mr = ipath_dereg_mr;
+ dev->alloc_fmr = ipath_alloc_fmr;
+ dev->map_phys_fmr = ipath_map_phys_fmr;
+ dev->unmap_fmr = ipath_unmap_fmr;
+ dev->dealloc_fmr = ipath_dealloc_fmr;
+ dev->attach_mcast = ipath_multicast_attach;
+ dev->detach_mcast = ipath_multicast_detach;
+ dev->process_mad = ipath_process_mad;
+ dev->mmap = ipath_mmap;
+ dev->dma_ops = &ipath_dma_mapping_ops;
+ dev->get_port_immutable = ipath_port_immutable;
+
+ snprintf(dev->node_desc, sizeof(dev->node_desc),
+ IPATH_IDSTR " %s", init_utsname()->nodename);
+
+ ret = ib_register_device(dev, NULL);
+ if (ret)
+ goto err_reg;
+
+ ret = ipath_verbs_register_sysfs(dev);
+ if (ret)
+ goto err_class;
+
+ enable_timer(dd);
+
+ goto bail;
+
+err_class:
+ ib_unregister_device(dev);
+err_reg:
+ kfree(idev->lk_table.table);
+err_lk:
+ kfree(idev->qp_table.table);
+err_qp:
+ kfree(idev->txreq_bufs);
+err_tx:
+ ib_dealloc_device(dev);
+ ipath_dev_err(dd, "cannot register verbs: %d!\n", -ret);
+ idev = NULL;
+
+bail:
+ dd->verbs_dev = idev;
+ return ret;
+}
+
+void ipath_unregister_ib_device(struct ipath_ibdev *dev)
+{
+ struct ib_device *ibdev = &dev->ibdev;
+ u32 qps_inuse;
+
+ ib_unregister_device(ibdev);
+
+ disable_timer(dev->dd);
+
+ if (!list_empty(&dev->pending[0]) ||
+ !list_empty(&dev->pending[1]) ||
+ !list_empty(&dev->pending[2]))
+ ipath_dev_err(dev->dd, "pending list not empty!\n");
+ if (!list_empty(&dev->piowait))
+ ipath_dev_err(dev->dd, "piowait list not empty!\n");
+ if (!list_empty(&dev->rnrwait))
+ ipath_dev_err(dev->dd, "rnrwait list not empty!\n");
+ if (!ipath_mcast_tree_empty())
+ ipath_dev_err(dev->dd, "multicast table memory leak!\n");
+ /*
+ * Note that ipath_unregister_ib_device() can be called before all
+ * the QPs are destroyed!
+ */
+ qps_inuse = ipath_free_all_qps(&dev->qp_table);
+ if (qps_inuse)
+ ipath_dev_err(dev->dd, "QP memory leak! %u still in use\n",
+ qps_inuse);
+ kfree(dev->qp_table.table);
+ kfree(dev->lk_table.table);
+ kfree(dev->txreq_bufs);
+ ib_dealloc_device(ibdev);
+}
+
+static ssize_t show_rev(struct device *device, struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_ibdev *dev =
+ container_of(device, struct ipath_ibdev, ibdev.dev);
+
+ return sprintf(buf, "%x\n", dev->dd->ipath_pcirev);
+}
+
+static ssize_t show_hca(struct device *device, struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_ibdev *dev =
+ container_of(device, struct ipath_ibdev, ibdev.dev);
+ int ret;
+
+ ret = dev->dd->ipath_f_get_boardname(dev->dd, buf, 128);
+ if (ret < 0)
+ goto bail;
+ strcat(buf, "\n");
+ ret = strlen(buf);
+
+bail:
+ return ret;
+}
+
+static ssize_t show_stats(struct device *device, struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_ibdev *dev =
+ container_of(device, struct ipath_ibdev, ibdev.dev);
+ int i;
+ int len;
+
+ len = sprintf(buf,
+ "RC resends %d\n"
+ "RC no QACK %d\n"
+ "RC ACKs %d\n"
+ "RC SEQ NAKs %d\n"
+ "RC RDMA seq %d\n"
+ "RC RNR NAKs %d\n"
+ "RC OTH NAKs %d\n"
+ "RC timeouts %d\n"
+ "RC RDMA dup %d\n"
+ "piobuf wait %d\n"
+ "unaligned %d\n"
+ "PKT drops %d\n"
+ "WQE errs %d\n",
+ dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
+ dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
+ dev->n_other_naks, dev->n_timeouts,
+ dev->n_rdma_dup_busy, dev->n_piowait, dev->n_unaligned,
+ dev->n_pkt_drops, dev->n_wqe_errs);
+ for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
+ const struct ipath_opcode_stats *si = &dev->opstats[i];
+
+ if (!si->n_packets && !si->n_bytes)
+ continue;
+ len += sprintf(buf + len, "%02x %llu/%llu\n", i,
+ (unsigned long long) si->n_packets,
+ (unsigned long long) si->n_bytes);
+ }
+ return len;
+}
+
+static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
+static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
+static DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL);
+static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
+
+static struct device_attribute *ipath_class_attributes[] = {
+ &dev_attr_hw_rev,
+ &dev_attr_hca_type,
+ &dev_attr_board_id,
+ &dev_attr_stats
+};
+
+static int ipath_verbs_register_sysfs(struct ib_device *dev)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i) {
+ ret = device_create_file(&dev->dev,
+ ipath_class_attributes[i]);
+ if (ret)
+ goto bail;
+ }
+ return 0;
+bail:
+ for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
+ device_remove_file(&dev->dev, ipath_class_attributes[i]);
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IPATH_VERBS_H
+#define IPATH_VERBS_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kref.h>
+#include <rdma/ib_pack.h>
+#include <rdma/ib_user_verbs.h>
+
+#include "ipath_kernel.h"
+
+#define IPATH_MAX_RDMA_ATOMIC 4
+
+#define QPN_MAX (1 << 24)
+#define QPNMAP_ENTRIES (QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
+
+/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define IPATH_UVERBS_ABI_VERSION 2
+
+/*
+ * Define an ib_cq_notify value that is not valid so we know when CQ
+ * notifications are armed.
+ */
+#define IB_CQ_NONE (IB_CQ_NEXT_COMP + 1)
+
+/* AETH NAK opcode values */
+#define IB_RNR_NAK 0x20
+#define IB_NAK_PSN_ERROR 0x60
+#define IB_NAK_INVALID_REQUEST 0x61
+#define IB_NAK_REMOTE_ACCESS_ERROR 0x62
+#define IB_NAK_REMOTE_OPERATIONAL_ERROR 0x63
+#define IB_NAK_INVALID_RD_REQUEST 0x64
+
+/* Flags for checking QP state (see ib_ipath_state_ops[]) */
+#define IPATH_POST_SEND_OK 0x01
+#define IPATH_POST_RECV_OK 0x02
+#define IPATH_PROCESS_RECV_OK 0x04
+#define IPATH_PROCESS_SEND_OK 0x08
+#define IPATH_PROCESS_NEXT_SEND_OK 0x10
+#define IPATH_FLUSH_SEND 0x20
+#define IPATH_FLUSH_RECV 0x40
+#define IPATH_PROCESS_OR_FLUSH_SEND \
+ (IPATH_PROCESS_SEND_OK | IPATH_FLUSH_SEND)
+
+/* IB Performance Manager status values */
+#define IB_PMA_SAMPLE_STATUS_DONE 0x00
+#define IB_PMA_SAMPLE_STATUS_STARTED 0x01
+#define IB_PMA_SAMPLE_STATUS_RUNNING 0x02
+
+/* Mandatory IB performance counter select values. */
+#define IB_PMA_PORT_XMIT_DATA cpu_to_be16(0x0001)
+#define IB_PMA_PORT_RCV_DATA cpu_to_be16(0x0002)
+#define IB_PMA_PORT_XMIT_PKTS cpu_to_be16(0x0003)
+#define IB_PMA_PORT_RCV_PKTS cpu_to_be16(0x0004)
+#define IB_PMA_PORT_XMIT_WAIT cpu_to_be16(0x0005)
+
+struct ib_reth {
+ __be64 vaddr;
+ __be32 rkey;
+ __be32 length;
+} __attribute__ ((packed));
+
+struct ib_atomic_eth {
+ __be32 vaddr[2]; /* unaligned so access as 2 32-bit words */
+ __be32 rkey;
+ __be64 swap_data;
+ __be64 compare_data;
+} __attribute__ ((packed));
+
+struct ipath_other_headers {
+ __be32 bth[3];
+ union {
+ struct {
+ __be32 deth[2];
+ __be32 imm_data;
+ } ud;
+ struct {
+ struct ib_reth reth;
+ __be32 imm_data;
+ } rc;
+ struct {
+ __be32 aeth;
+ __be32 atomic_ack_eth[2];
+ } at;
+ __be32 imm_data;
+ __be32 aeth;
+ struct ib_atomic_eth atomic_eth;
+ } u;
+} __attribute__ ((packed));
+
+/*
+ * Note that UD packets with a GRH header are 8+40+12+8 = 68 bytes
+ * long (72 w/ imm_data). Only the first 56 bytes of the IB header
+ * will be in the eager header buffer. The remaining 12 or 16 bytes
+ * are in the data buffer.
+ */
+struct ipath_ib_header {
+ __be16 lrh[4];
+ union {
+ struct {
+ struct ib_grh grh;
+ struct ipath_other_headers oth;
+ } l;
+ struct ipath_other_headers oth;
+ } u;
+} __attribute__ ((packed));
+
+struct ipath_pio_header {
+ __le32 pbc[2];
+ struct ipath_ib_header hdr;
+} __attribute__ ((packed));
+
+/*
+ * There is one struct ipath_mcast for each multicast GID.
+ * All attached QPs are then stored as a list of
+ * struct ipath_mcast_qp.
+ */
+struct ipath_mcast_qp {
+ struct list_head list;
+ struct ipath_qp *qp;
+};
+
+struct ipath_mcast {
+ struct rb_node rb_node;
+ union ib_gid mgid;
+ struct list_head qp_list;
+ wait_queue_head_t wait;
+ atomic_t refcount;
+ int n_attached;
+};
+
+/* Protection domain */
+struct ipath_pd {
+ struct ib_pd ibpd;
+ int user; /* non-zero if created from user space */
+};
+
+/* Address Handle */
+struct ipath_ah {
+ struct ib_ah ibah;
+ struct ib_ah_attr attr;
+};
+
+/*
+ * This structure is used by ipath_mmap() to validate an offset
+ * when an mmap() request is made. The vm_area_struct then uses
+ * this as its vm_private_data.
+ */
+struct ipath_mmap_info {
+ struct list_head pending_mmaps;
+ struct ib_ucontext *context;
+ void *obj;
+ __u64 offset;
+ struct kref ref;
+ unsigned size;
+};
+
+/*
+ * This structure is used to contain the head pointer, tail pointer,
+ * and completion queue entries as a single memory allocation so
+ * it can be mmap'ed into user space.
+ */
+struct ipath_cq_wc {
+ u32 head; /* index of next entry to fill */
+ u32 tail; /* index of next ib_poll_cq() entry */
+ union {
+ /* these are actually size ibcq.cqe + 1 */
+ struct ib_uverbs_wc uqueue[0];
+ struct ib_wc kqueue[0];
+ };
+};
+
+/*
+ * The completion queue structure.
+ */
+struct ipath_cq {
+ struct ib_cq ibcq;
+ struct tasklet_struct comptask;
+ spinlock_t lock;
+ u8 notify;
+ u8 triggered;
+ struct ipath_cq_wc *queue;
+ struct ipath_mmap_info *ip;
+};
+
+/*
+ * A segment is a linear region of low physical memory.
+ * XXX Maybe we should use phys addr here and kmap()/kunmap().
+ * Used by the verbs layer.
+ */
+struct ipath_seg {
+ void *vaddr;
+ size_t length;
+};
+
+/* The number of ipath_segs that fit in a page. */
+#define IPATH_SEGSZ (PAGE_SIZE / sizeof (struct ipath_seg))
+
+struct ipath_segarray {
+ struct ipath_seg segs[IPATH_SEGSZ];
+};
+
+struct ipath_mregion {
+ struct ib_pd *pd; /* shares refcnt of ibmr.pd */
+ u64 user_base; /* User's address for this region */
+ u64 iova; /* IB start address of this region */
+ size_t length;
+ u32 lkey;
+ u32 offset; /* offset (bytes) to start of region */
+ int access_flags;
+ u32 max_segs; /* number of ipath_segs in all the arrays */
+ u32 mapsz; /* size of the map array */
+ struct ipath_segarray *map[0]; /* the segments */
+};
+
+/*
+ * These keep track of the copy progress within a memory region.
+ * Used by the verbs layer.
+ */
+struct ipath_sge {
+ struct ipath_mregion *mr;
+ void *vaddr; /* kernel virtual address of segment */
+ u32 sge_length; /* length of the SGE */
+ u32 length; /* remaining length of the segment */
+ u16 m; /* current index: mr->map[m] */
+ u16 n; /* current index: mr->map[m]->segs[n] */
+};
+
+/* Memory region */
+struct ipath_mr {
+ struct ib_mr ibmr;
+ struct ib_umem *umem;
+ struct ipath_mregion mr; /* must be last */
+};
+
+/*
+ * Send work request queue entry.
+ * The size of the sg_list is determined when the QP is created and stored
+ * in qp->s_max_sge.
+ */
+struct ipath_swqe {
+ struct ib_send_wr wr; /* don't use wr.sg_list */
+ u32 psn; /* first packet sequence number */
+ u32 lpsn; /* last packet sequence number */
+ u32 ssn; /* send sequence number */
+ u32 length; /* total length of data in sg_list */
+ struct ipath_sge sg_list[0];
+};
+
+/*
+ * Receive work request queue entry.
+ * The size of the sg_list is determined when the QP (or SRQ) is created
+ * and stored in qp->r_rq.max_sge (or srq->rq.max_sge).
+ */
+struct ipath_rwqe {
+ u64 wr_id;
+ u8 num_sge;
+ struct ib_sge sg_list[0];
+};
+
+/*
+ * This structure is used to contain the head pointer, tail pointer,
+ * and receive work queue entries as a single memory allocation so
+ * it can be mmap'ed into user space.
+ * Note that the wq array elements are variable size so you can't
+ * just index into the array to get the N'th element;
+ * use get_rwqe_ptr() instead.
+ */
+struct ipath_rwq {
+ u32 head; /* new work requests posted to the head */
+ u32 tail; /* receives pull requests from here. */
+ struct ipath_rwqe wq[0];
+};
+
+struct ipath_rq {
+ struct ipath_rwq *wq;
+ spinlock_t lock;
+ u32 size; /* size of RWQE array */
+ u8 max_sge;
+};
+
+struct ipath_srq {
+ struct ib_srq ibsrq;
+ struct ipath_rq rq;
+ struct ipath_mmap_info *ip;
+ /* send signal when number of RWQEs < limit */
+ u32 limit;
+};
+
+struct ipath_sge_state {
+ struct ipath_sge *sg_list; /* next SGE to be used if any */
+ struct ipath_sge sge; /* progress state for the current SGE */
+ u8 num_sge;
+ u8 static_rate;
+};
+
+/*
+ * This structure holds the information that the send tasklet needs
+ * to send a RDMA read response or atomic operation.
+ */
+struct ipath_ack_entry {
+ u8 opcode;
+ u8 sent;
+ u32 psn;
+ union {
+ struct ipath_sge_state rdma_sge;
+ u64 atomic_data;
+ };
+};
+
+/*
+ * Variables prefixed with s_ are for the requester (sender).
+ * Variables prefixed with r_ are for the responder (receiver).
+ * Variables prefixed with ack_ are for responder replies.
+ *
+ * Common variables are protected by both r_rq.lock and s_lock in that order
+ * which only happens in modify_qp() or changing the QP 'state'.
+ */
+struct ipath_qp {
+ struct ib_qp ibqp;
+ struct ipath_qp *next; /* link list for QPN hash table */
+ struct ipath_qp *timer_next; /* link list for ipath_ib_timer() */
+ struct ipath_qp *pio_next; /* link for ipath_ib_piobufavail() */
+ struct list_head piowait; /* link for wait PIO buf */
+ struct list_head timerwait; /* link for waiting for timeouts */
+ struct ib_ah_attr remote_ah_attr;
+ struct ipath_ib_header s_hdr; /* next packet header to send */
+ atomic_t refcount;
+ wait_queue_head_t wait;
+ wait_queue_head_t wait_dma;
+ struct tasklet_struct s_task;
+ struct ipath_mmap_info *ip;
+ struct ipath_sge_state *s_cur_sge;
+ struct ipath_verbs_txreq *s_tx;
+ struct ipath_sge_state s_sge; /* current send request data */
+ struct ipath_ack_entry s_ack_queue[IPATH_MAX_RDMA_ATOMIC + 1];
+ struct ipath_sge_state s_ack_rdma_sge;
+ struct ipath_sge_state s_rdma_read_sge;
+ struct ipath_sge_state r_sge; /* current receive data */
+ spinlock_t s_lock;
+ atomic_t s_dma_busy;
+ u16 s_pkt_delay;
+ u16 s_hdrwords; /* size of s_hdr in 32 bit words */
+ u32 s_cur_size; /* size of send packet in bytes */
+ u32 s_len; /* total length of s_sge */
+ u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
+ u32 s_next_psn; /* PSN for next request */
+ u32 s_last_psn; /* last response PSN processed */
+ u32 s_psn; /* current packet sequence number */
+ u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
+ u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
+ u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */
+ u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
+ u64 r_wr_id; /* ID for current receive WQE */
+ unsigned long r_aflags;
+ u32 r_len; /* total length of r_sge */
+ u32 r_rcv_len; /* receive data len processed */
+ u32 r_psn; /* expected rcv packet sequence number */
+ u32 r_msn; /* message sequence number */
+ u8 state; /* QP state */
+ u8 s_state; /* opcode of last packet sent */
+ u8 s_ack_state; /* opcode of packet to ACK */
+ u8 s_nak_state; /* non-zero if NAK is pending */
+ u8 r_state; /* opcode of last packet received */
+ u8 r_nak_state; /* non-zero if NAK is pending */
+ u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
+ u8 r_flags;
+ u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
+ u8 r_head_ack_queue; /* index into s_ack_queue[] */
+ u8 qp_access_flags;
+ u8 s_max_sge; /* size of s_wq->sg_list */
+ u8 s_retry_cnt; /* number of times to retry */
+ u8 s_rnr_retry_cnt;
+ u8 s_retry; /* requester retry counter */
+ u8 s_rnr_retry; /* requester RNR retry counter */
+ u8 s_pkey_index; /* PKEY index to use */
+ u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
+ u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
+ u8 s_tail_ack_queue; /* index into s_ack_queue[] */
+ u8 s_flags;
+ u8 s_dmult;
+ u8 s_draining;
+ u8 timeout; /* Timeout for this QP */
+ enum ib_mtu path_mtu;
+ u32 remote_qpn;
+ u32 qkey; /* QKEY for this QP (for UD or RD) */
+ u32 s_size; /* send work queue size */
+ u32 s_head; /* new entries added here */
+ u32 s_tail; /* next entry to process */
+ u32 s_cur; /* current work queue entry */
+ u32 s_last; /* last un-ACK'ed entry */
+ u32 s_ssn; /* SSN of tail entry */
+ u32 s_lsn; /* limit sequence number (credit) */
+ struct ipath_swqe *s_wq; /* send work queue */
+ struct ipath_swqe *s_wqe;
+ struct ipath_sge *r_ud_sg_list;
+ struct ipath_rq r_rq; /* receive work queue */
+ struct ipath_sge r_sg_list[0]; /* verified SGEs */
+};
+
+/*
+ * Atomic bit definitions for r_aflags.
+ */
+#define IPATH_R_WRID_VALID 0
+
+/*
+ * Bit definitions for r_flags.
+ */
+#define IPATH_R_REUSE_SGE 0x01
+#define IPATH_R_RDMAR_SEQ 0x02
+
+/*
+ * Bit definitions for s_flags.
+ *
+ * IPATH_S_FENCE_PENDING - waiting for all prior RDMA read or atomic SWQEs
+ * before processing the next SWQE
+ * IPATH_S_RDMAR_PENDING - waiting for any RDMA read or atomic SWQEs
+ * before processing the next SWQE
+ * IPATH_S_WAITING - waiting for RNR timeout or send buffer available.
+ * IPATH_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
+ * IPATH_S_WAIT_DMA - waiting for send DMA queue to drain before generating
+ * next send completion entry not via send DMA.
+ */
+#define IPATH_S_SIGNAL_REQ_WR 0x01
+#define IPATH_S_FENCE_PENDING 0x02
+#define IPATH_S_RDMAR_PENDING 0x04
+#define IPATH_S_ACK_PENDING 0x08
+#define IPATH_S_BUSY 0x10
+#define IPATH_S_WAITING 0x20
+#define IPATH_S_WAIT_SSN_CREDIT 0x40
+#define IPATH_S_WAIT_DMA 0x80
+
+#define IPATH_S_ANY_WAIT (IPATH_S_FENCE_PENDING | IPATH_S_RDMAR_PENDING | \
+ IPATH_S_WAITING | IPATH_S_WAIT_SSN_CREDIT | IPATH_S_WAIT_DMA)
+
+#define IPATH_PSN_CREDIT 512
+
+/*
+ * Since struct ipath_swqe is not a fixed size, we can't simply index into
+ * struct ipath_qp.s_wq. This function does the array index computation.
+ */
+static inline struct ipath_swqe *get_swqe_ptr(struct ipath_qp *qp,
+ unsigned n)
+{
+ return (struct ipath_swqe *)((char *)qp->s_wq +
+ (sizeof(struct ipath_swqe) +
+ qp->s_max_sge *
+ sizeof(struct ipath_sge)) * n);
+}
+
+/*
+ * Since struct ipath_rwqe is not a fixed size, we can't simply index into
+ * struct ipath_rwq.wq. This function does the array index computation.
+ */
+static inline struct ipath_rwqe *get_rwqe_ptr(struct ipath_rq *rq,
+ unsigned n)
+{
+ return (struct ipath_rwqe *)
+ ((char *) rq->wq->wq +
+ (sizeof(struct ipath_rwqe) +
+ rq->max_sge * sizeof(struct ib_sge)) * n);
+}
+
+/*
+ * QPN-map pages start out as NULL, they get allocated upon
+ * first use and are never deallocated. This way,
+ * large bitmaps are not allocated unless large numbers of QPs are used.
+ */
+struct qpn_map {
+ atomic_t n_free;
+ void *page;
+};
+
+struct ipath_qp_table {
+ spinlock_t lock;
+ u32 last; /* last QP number allocated */
+ u32 max; /* size of the hash table */
+ u32 nmaps; /* size of the map table */
+ struct ipath_qp **table;
+ /* bit map of free numbers */
+ struct qpn_map map[QPNMAP_ENTRIES];
+};
+
+struct ipath_lkey_table {
+ spinlock_t lock;
+ u32 next; /* next unused index (speeds search) */
+ u32 gen; /* generation count */
+ u32 max; /* size of the table */
+ struct ipath_mregion **table;
+};
+
+struct ipath_opcode_stats {
+ u64 n_packets; /* number of packets */
+ u64 n_bytes; /* total number of bytes */
+};
+
+struct ipath_ibdev {
+ struct ib_device ibdev;
+ struct ipath_devdata *dd;
+ struct list_head pending_mmaps;
+ spinlock_t mmap_offset_lock;
+ u32 mmap_offset;
+ int ib_unit; /* This is the device number */
+ u16 sm_lid; /* in host order */
+ u8 sm_sl;
+ u8 mkeyprot;
+ /* non-zero when timer is set */
+ unsigned long mkey_lease_timeout;
+
+ /* The following fields are really per port. */
+ struct ipath_qp_table qp_table;
+ struct ipath_lkey_table lk_table;
+ struct list_head pending[3]; /* FIFO of QPs waiting for ACKs */
+ struct list_head piowait; /* list for wait PIO buf */
+ struct list_head txreq_free;
+ void *txreq_bufs;
+ /* list of QPs waiting for RNR timer */
+ struct list_head rnrwait;
+ spinlock_t pending_lock;
+ __be64 sys_image_guid; /* in network order */
+ __be64 gid_prefix; /* in network order */
+ __be64 mkey;
+
+ u32 n_pds_allocated; /* number of PDs allocated for device */
+ spinlock_t n_pds_lock;
+ u32 n_ahs_allocated; /* number of AHs allocated for device */
+ spinlock_t n_ahs_lock;
+ u32 n_cqs_allocated; /* number of CQs allocated for device */
+ spinlock_t n_cqs_lock;
+ u32 n_qps_allocated; /* number of QPs allocated for device */
+ spinlock_t n_qps_lock;
+ u32 n_srqs_allocated; /* number of SRQs allocated for device */
+ spinlock_t n_srqs_lock;
+ u32 n_mcast_grps_allocated; /* number of mcast groups allocated */
+ spinlock_t n_mcast_grps_lock;
+
+ u64 ipath_sword; /* total dwords sent (sample result) */
+ u64 ipath_rword; /* total dwords received (sample result) */
+ u64 ipath_spkts; /* total packets sent (sample result) */
+ u64 ipath_rpkts; /* total packets received (sample result) */
+ /* # of ticks no data sent (sample result) */
+ u64 ipath_xmit_wait;
+ u64 rcv_errors; /* # of packets with SW detected rcv errs */
+ u64 n_unicast_xmit; /* total unicast packets sent */
+ u64 n_unicast_rcv; /* total unicast packets received */
+ u64 n_multicast_xmit; /* total multicast packets sent */
+ u64 n_multicast_rcv; /* total multicast packets received */
+ u64 z_symbol_error_counter; /* starting count for PMA */
+ u64 z_link_error_recovery_counter; /* starting count for PMA */
+ u64 z_link_downed_counter; /* starting count for PMA */
+ u64 z_port_rcv_errors; /* starting count for PMA */
+ u64 z_port_rcv_remphys_errors; /* starting count for PMA */
+ u64 z_port_xmit_discards; /* starting count for PMA */
+ u64 z_port_xmit_data; /* starting count for PMA */
+ u64 z_port_rcv_data; /* starting count for PMA */
+ u64 z_port_xmit_packets; /* starting count for PMA */
+ u64 z_port_rcv_packets; /* starting count for PMA */
+ u32 z_pkey_violations; /* starting count for PMA */
+ u32 z_local_link_integrity_errors; /* starting count for PMA */
+ u32 z_excessive_buffer_overrun_errors; /* starting count for PMA */
+ u32 z_vl15_dropped; /* starting count for PMA */
+ u32 n_rc_resends;
+ u32 n_rc_acks;
+ u32 n_rc_qacks;
+ u32 n_seq_naks;
+ u32 n_rdma_seq;
+ u32 n_rnr_naks;
+ u32 n_other_naks;
+ u32 n_timeouts;
+ u32 n_pkt_drops;
+ u32 n_vl15_dropped;
+ u32 n_wqe_errs;
+ u32 n_rdma_dup_busy;
+ u32 n_piowait;
+ u32 n_unaligned;
+ u32 port_cap_flags;
+ u32 pma_sample_start;
+ u32 pma_sample_interval;
+ __be16 pma_counter_select[5];
+ u16 pma_tag;
+ u16 qkey_violations;
+ u16 mkey_violations;
+ u16 mkey_lease_period;
+ u16 pending_index; /* which pending queue is active */
+ u8 pma_sample_status;
+ u8 subnet_timeout;
+ u8 vl_high_limit;
+ struct ipath_opcode_stats opstats[128];
+};
+
+struct ipath_verbs_counters {
+ u64 symbol_error_counter;
+ u64 link_error_recovery_counter;
+ u64 link_downed_counter;
+ u64 port_rcv_errors;
+ u64 port_rcv_remphys_errors;
+ u64 port_xmit_discards;
+ u64 port_xmit_data;
+ u64 port_rcv_data;
+ u64 port_xmit_packets;
+ u64 port_rcv_packets;
+ u32 local_link_integrity_errors;
+ u32 excessive_buffer_overrun_errors;
+ u32 vl15_dropped;
+};
+
+struct ipath_verbs_txreq {
+ struct ipath_qp *qp;
+ struct ipath_swqe *wqe;
+ u32 map_len;
+ u32 len;
+ struct ipath_sge_state *ss;
+ struct ipath_pio_header hdr;
+ struct ipath_sdma_txreq txreq;
+};
+
+static inline struct ipath_mr *to_imr(struct ib_mr *ibmr)
+{
+ return container_of(ibmr, struct ipath_mr, ibmr);
+}
+
+static inline struct ipath_pd *to_ipd(struct ib_pd *ibpd)
+{
+ return container_of(ibpd, struct ipath_pd, ibpd);
+}
+
+static inline struct ipath_ah *to_iah(struct ib_ah *ibah)
+{
+ return container_of(ibah, struct ipath_ah, ibah);
+}
+
+static inline struct ipath_cq *to_icq(struct ib_cq *ibcq)
+{
+ return container_of(ibcq, struct ipath_cq, ibcq);
+}
+
+static inline struct ipath_srq *to_isrq(struct ib_srq *ibsrq)
+{
+ return container_of(ibsrq, struct ipath_srq, ibsrq);
+}
+
+static inline struct ipath_qp *to_iqp(struct ib_qp *ibqp)
+{
+ return container_of(ibqp, struct ipath_qp, ibqp);
+}
+
+static inline struct ipath_ibdev *to_idev(struct ib_device *ibdev)
+{
+ return container_of(ibdev, struct ipath_ibdev, ibdev);
+}
+
+/*
+ * This must be called with s_lock held.
+ */
+static inline void ipath_schedule_send(struct ipath_qp *qp)
+{
+ if (qp->s_flags & IPATH_S_ANY_WAIT)
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ if (!(qp->s_flags & IPATH_S_BUSY))
+ tasklet_hi_schedule(&qp->s_task);
+}
+
+int ipath_process_mad(struct ib_device *ibdev,
+ int mad_flags,
+ u8 port_num,
+ const struct ib_wc *in_wc,
+ const struct ib_grh *in_grh,
+ const struct ib_mad_hdr *in, size_t in_mad_size,
+ struct ib_mad_hdr *out, size_t *out_mad_size,
+ u16 *out_mad_pkey_index);
+
+/*
+ * Compare the lower 24 bits of the two values.
+ * Returns an integer <, ==, or > than zero.
+ */
+static inline int ipath_cmp24(u32 a, u32 b)
+{
+ return (((int) a) - ((int) b)) << 8;
+}
+
+struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid);
+
+int ipath_snapshot_counters(struct ipath_devdata *dd, u64 *swords,
+ u64 *rwords, u64 *spkts, u64 *rpkts,
+ u64 *xmit_wait);
+
+int ipath_get_counters(struct ipath_devdata *dd,
+ struct ipath_verbs_counters *cntrs);
+
+int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
+
+int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid);
+
+int ipath_mcast_tree_empty(void);
+
+__be32 ipath_compute_aeth(struct ipath_qp *qp);
+
+struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn);
+
+struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
+ struct ib_qp_init_attr *init_attr,
+ struct ib_udata *udata);
+
+int ipath_destroy_qp(struct ib_qp *ibqp);
+
+int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err);
+
+int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_udata *udata);
+
+int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
+ int attr_mask, struct ib_qp_init_attr *init_attr);
+
+unsigned ipath_free_all_qps(struct ipath_qp_table *qpt);
+
+int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
+
+void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
+
+unsigned ipath_ib_rate_to_mult(enum ib_rate rate);
+
+int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
+ u32 hdrwords, struct ipath_sge_state *ss, u32 len);
+
+void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length);
+
+void ipath_skip_sge(struct ipath_sge_state *ss, u32 length);
+
+void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
+
+void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
+
+void ipath_restart_rc(struct ipath_qp *qp, u32 psn);
+
+void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err);
+
+int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
+
+void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
+ int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
+
+int ipath_alloc_lkey(struct ipath_lkey_table *rkt,
+ struct ipath_mregion *mr);
+
+void ipath_free_lkey(struct ipath_lkey_table *rkt, u32 lkey);
+
+int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge,
+ struct ib_sge *sge, int acc);
+
+int ipath_rkey_ok(struct ipath_qp *qp, struct ipath_sge_state *ss,
+ u32 len, u64 vaddr, u32 rkey, int acc);
+
+int ipath_post_srq_receive(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
+ struct ib_recv_wr **bad_wr);
+
+struct ib_srq *ipath_create_srq(struct ib_pd *ibpd,
+ struct ib_srq_init_attr *srq_init_attr,
+ struct ib_udata *udata);
+
+int ipath_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
+ enum ib_srq_attr_mask attr_mask,
+ struct ib_udata *udata);
+
+int ipath_query_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr);
+
+int ipath_destroy_srq(struct ib_srq *ibsrq);
+
+void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int sig);
+
+int ipath_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry);
+
+struct ib_cq *ipath_create_cq(struct ib_device *ibdev,
+ const struct ib_cq_init_attr *attr,
+ struct ib_ucontext *context,
+ struct ib_udata *udata);
+
+int ipath_destroy_cq(struct ib_cq *ibcq);
+
+int ipath_req_notify_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags notify_flags);
+
+int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata);
+
+struct ib_mr *ipath_get_dma_mr(struct ib_pd *pd, int acc);
+
+struct ib_mr *ipath_reg_phys_mr(struct ib_pd *pd,
+ struct ib_phys_buf *buffer_list,
+ int num_phys_buf, int acc, u64 *iova_start);
+
+struct ib_mr *ipath_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
+ u64 virt_addr, int mr_access_flags,
+ struct ib_udata *udata);
+
+int ipath_dereg_mr(struct ib_mr *ibmr);
+
+struct ib_fmr *ipath_alloc_fmr(struct ib_pd *pd, int mr_access_flags,
+ struct ib_fmr_attr *fmr_attr);
+
+int ipath_map_phys_fmr(struct ib_fmr *ibfmr, u64 * page_list,
+ int list_len, u64 iova);
+
+int ipath_unmap_fmr(struct list_head *fmr_list);
+
+int ipath_dealloc_fmr(struct ib_fmr *ibfmr);
+
+void ipath_release_mmap_info(struct kref *ref);
+
+struct ipath_mmap_info *ipath_create_mmap_info(struct ipath_ibdev *dev,
+ u32 size,
+ struct ib_ucontext *context,
+ void *obj);
+
+void ipath_update_mmap_info(struct ipath_ibdev *dev,
+ struct ipath_mmap_info *ip,
+ u32 size, void *obj);
+
+int ipath_mmap(struct ib_ucontext *context, struct vm_area_struct *vma);
+
+void ipath_insert_rnr_queue(struct ipath_qp *qp);
+
+int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
+ u32 *lengthp, struct ipath_sge_state *ss);
+
+int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only);
+
+u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
+ struct ib_global_route *grh, u32 hwords, u32 nwords);
+
+void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
+ struct ipath_other_headers *ohdr,
+ u32 bth0, u32 bth2);
+
+void ipath_do_send(unsigned long data);
+
+void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
+ enum ib_wc_status status);
+
+int ipath_make_rc_req(struct ipath_qp *qp);
+
+int ipath_make_uc_req(struct ipath_qp *qp);
+
+int ipath_make_ud_req(struct ipath_qp *qp);
+
+int ipath_register_ib_device(struct ipath_devdata *);
+
+void ipath_unregister_ib_device(struct ipath_ibdev *);
+
+void ipath_ib_rcv(struct ipath_ibdev *, void *, void *, u32);
+
+int ipath_ib_piobufavail(struct ipath_ibdev *);
+
+unsigned ipath_get_npkeys(struct ipath_devdata *);
+
+u32 ipath_get_cr_errpkey(struct ipath_devdata *);
+
+unsigned ipath_get_pkey(struct ipath_devdata *, unsigned);
+
+extern const enum ib_wc_opcode ib_ipath_wc_opcode[];
+
+/*
+ * Below converts HCA-specific LinkTrainingState to IB PhysPortState
+ * values.
+ */
+extern const u8 ipath_cvt_physportstate[];
+#define IB_PHYSPORTSTATE_SLEEP 1
+#define IB_PHYSPORTSTATE_POLL 2
+#define IB_PHYSPORTSTATE_DISABLED 3
+#define IB_PHYSPORTSTATE_CFG_TRAIN 4
+#define IB_PHYSPORTSTATE_LINKUP 5
+#define IB_PHYSPORTSTATE_LINK_ERR_RECOVER 6
+
+extern const int ib_ipath_state_ops[];
+
+extern unsigned int ib_ipath_lkey_table_size;
+
+extern unsigned int ib_ipath_max_cqes;
+
+extern unsigned int ib_ipath_max_cqs;
+
+extern unsigned int ib_ipath_max_qp_wrs;
+
+extern unsigned int ib_ipath_max_qps;
+
+extern unsigned int ib_ipath_max_sges;
+
+extern unsigned int ib_ipath_max_mcast_grps;
+
+extern unsigned int ib_ipath_max_mcast_qp_attached;
+
+extern unsigned int ib_ipath_max_srqs;
+
+extern unsigned int ib_ipath_max_srq_sges;
+
+extern unsigned int ib_ipath_max_srq_wrs;
+
+extern const u32 ib_ipath_rnr_table[];
+
+extern struct ib_dma_mapping_ops ipath_dma_mapping_ops;
+
+#endif /* IPATH_VERBS_H */
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/rculist.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "ipath_verbs.h"
+
+/*
+ * Global table of GID to attached QPs.
+ * The table is global to all ipath devices since a send from one QP/device
+ * needs to be locally routed to any locally attached QPs on the same
+ * or different device.
+ */
+static struct rb_root mcast_tree;
+static DEFINE_SPINLOCK(mcast_lock);
+
+/**
+ * ipath_mcast_qp_alloc - alloc a struct to link a QP to mcast GID struct
+ * @qp: the QP to link
+ */
+static struct ipath_mcast_qp *ipath_mcast_qp_alloc(struct ipath_qp *qp)
+{
+ struct ipath_mcast_qp *mqp;
+
+ mqp = kmalloc(sizeof *mqp, GFP_KERNEL);
+ if (!mqp)
+ goto bail;
+
+ mqp->qp = qp;
+ atomic_inc(&qp->refcount);
+
+bail:
+ return mqp;
+}
+
+static void ipath_mcast_qp_free(struct ipath_mcast_qp *mqp)
+{
+ struct ipath_qp *qp = mqp->qp;
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+
+ kfree(mqp);
+}
+
+/**
+ * ipath_mcast_alloc - allocate the multicast GID structure
+ * @mgid: the multicast GID
+ *
+ * A list of QPs will be attached to this structure.
+ */
+static struct ipath_mcast *ipath_mcast_alloc(union ib_gid *mgid)
+{
+ struct ipath_mcast *mcast;
+
+ mcast = kmalloc(sizeof *mcast, GFP_KERNEL);
+ if (!mcast)
+ goto bail;
+
+ mcast->mgid = *mgid;
+ INIT_LIST_HEAD(&mcast->qp_list);
+ init_waitqueue_head(&mcast->wait);
+ atomic_set(&mcast->refcount, 0);
+ mcast->n_attached = 0;
+
+bail:
+ return mcast;
+}
+
+static void ipath_mcast_free(struct ipath_mcast *mcast)
+{
+ struct ipath_mcast_qp *p, *tmp;
+
+ list_for_each_entry_safe(p, tmp, &mcast->qp_list, list)
+ ipath_mcast_qp_free(p);
+
+ kfree(mcast);
+}
+
+/**
+ * ipath_mcast_find - search the global table for the given multicast GID
+ * @mgid: the multicast GID to search for
+ *
+ * Returns NULL if not found.
+ *
+ * The caller is responsible for decrementing the reference count if found.
+ */
+struct ipath_mcast *ipath_mcast_find(union ib_gid *mgid)
+{
+ struct rb_node *n;
+ unsigned long flags;
+ struct ipath_mcast *mcast;
+
+ spin_lock_irqsave(&mcast_lock, flags);
+ n = mcast_tree.rb_node;
+ while (n) {
+ int ret;
+
+ mcast = rb_entry(n, struct ipath_mcast, rb_node);
+
+ ret = memcmp(mgid->raw, mcast->mgid.raw,
+ sizeof(union ib_gid));
+ if (ret < 0)
+ n = n->rb_left;
+ else if (ret > 0)
+ n = n->rb_right;
+ else {
+ atomic_inc(&mcast->refcount);
+ spin_unlock_irqrestore(&mcast_lock, flags);
+ goto bail;
+ }
+ }
+ spin_unlock_irqrestore(&mcast_lock, flags);
+
+ mcast = NULL;
+
+bail:
+ return mcast;
+}
+
+/**
+ * ipath_mcast_add - insert mcast GID into table and attach QP struct
+ * @mcast: the mcast GID table
+ * @mqp: the QP to attach
+ *
+ * Return zero if both were added. Return EEXIST if the GID was already in
+ * the table but the QP was added. Return ESRCH if the QP was already
+ * attached and neither structure was added.
+ */
+static int ipath_mcast_add(struct ipath_ibdev *dev,
+ struct ipath_mcast *mcast,
+ struct ipath_mcast_qp *mqp)
+{
+ struct rb_node **n = &mcast_tree.rb_node;
+ struct rb_node *pn = NULL;
+ int ret;
+
+ spin_lock_irq(&mcast_lock);
+
+ while (*n) {
+ struct ipath_mcast *tmcast;
+ struct ipath_mcast_qp *p;
+
+ pn = *n;
+ tmcast = rb_entry(pn, struct ipath_mcast, rb_node);
+
+ ret = memcmp(mcast->mgid.raw, tmcast->mgid.raw,
+ sizeof(union ib_gid));
+ if (ret < 0) {
+ n = &pn->rb_left;
+ continue;
+ }
+ if (ret > 0) {
+ n = &pn->rb_right;
+ continue;
+ }
+
+ /* Search the QP list to see if this is already there. */
+ list_for_each_entry_rcu(p, &tmcast->qp_list, list) {
+ if (p->qp == mqp->qp) {
+ ret = ESRCH;
+ goto bail;
+ }
+ }
+ if (tmcast->n_attached == ib_ipath_max_mcast_qp_attached) {
+ ret = ENOMEM;
+ goto bail;
+ }
+
+ tmcast->n_attached++;
+
+ list_add_tail_rcu(&mqp->list, &tmcast->qp_list);
+ ret = EEXIST;
+ goto bail;
+ }
+
+ spin_lock(&dev->n_mcast_grps_lock);
+ if (dev->n_mcast_grps_allocated == ib_ipath_max_mcast_grps) {
+ spin_unlock(&dev->n_mcast_grps_lock);
+ ret = ENOMEM;
+ goto bail;
+ }
+
+ dev->n_mcast_grps_allocated++;
+ spin_unlock(&dev->n_mcast_grps_lock);
+
+ mcast->n_attached++;
+
+ list_add_tail_rcu(&mqp->list, &mcast->qp_list);
+
+ atomic_inc(&mcast->refcount);
+ rb_link_node(&mcast->rb_node, pn, n);
+ rb_insert_color(&mcast->rb_node, &mcast_tree);
+
+ ret = 0;
+
+bail:
+ spin_unlock_irq(&mcast_lock);
+
+ return ret;
+}
+
+int ipath_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
+ struct ipath_mcast *mcast;
+ struct ipath_mcast_qp *mqp;
+ int ret;
+
+ /*
+ * Allocate data structures since its better to do this outside of
+ * spin locks and it will most likely be needed.
+ */
+ mcast = ipath_mcast_alloc(gid);
+ if (mcast == NULL) {
+ ret = -ENOMEM;
+ goto bail;
+ }
+ mqp = ipath_mcast_qp_alloc(qp);
+ if (mqp == NULL) {
+ ipath_mcast_free(mcast);
+ ret = -ENOMEM;
+ goto bail;
+ }
+ switch (ipath_mcast_add(dev, mcast, mqp)) {
+ case ESRCH:
+ /* Neither was used: can't attach the same QP twice. */
+ ipath_mcast_qp_free(mqp);
+ ipath_mcast_free(mcast);
+ ret = -EINVAL;
+ goto bail;
+ case EEXIST: /* The mcast wasn't used */
+ ipath_mcast_free(mcast);
+ break;
+ case ENOMEM:
+ /* Exceeded the maximum number of mcast groups. */
+ ipath_mcast_qp_free(mqp);
+ ipath_mcast_free(mcast);
+ ret = -ENOMEM;
+ goto bail;
+ default:
+ break;
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
+{
+ struct ipath_qp *qp = to_iqp(ibqp);
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
+ struct ipath_mcast *mcast = NULL;
+ struct ipath_mcast_qp *p, *tmp;
+ struct rb_node *n;
+ int last = 0;
+ int ret;
+
+ spin_lock_irq(&mcast_lock);
+
+ /* Find the GID in the mcast table. */
+ n = mcast_tree.rb_node;
+ while (1) {
+ if (n == NULL) {
+ spin_unlock_irq(&mcast_lock);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ mcast = rb_entry(n, struct ipath_mcast, rb_node);
+ ret = memcmp(gid->raw, mcast->mgid.raw,
+ sizeof(union ib_gid));
+ if (ret < 0)
+ n = n->rb_left;
+ else if (ret > 0)
+ n = n->rb_right;
+ else
+ break;
+ }
+
+ /* Search the QP list. */
+ list_for_each_entry_safe(p, tmp, &mcast->qp_list, list) {
+ if (p->qp != qp)
+ continue;
+ /*
+ * We found it, so remove it, but don't poison the forward
+ * link until we are sure there are no list walkers.
+ */
+ list_del_rcu(&p->list);
+ mcast->n_attached--;
+
+ /* If this was the last attached QP, remove the GID too. */
+ if (list_empty(&mcast->qp_list)) {
+ rb_erase(&mcast->rb_node, &mcast_tree);
+ last = 1;
+ }
+ break;
+ }
+
+ spin_unlock_irq(&mcast_lock);
+
+ if (p) {
+ /*
+ * Wait for any list walkers to finish before freeing the
+ * list element.
+ */
+ wait_event(mcast->wait, atomic_read(&mcast->refcount) <= 1);
+ ipath_mcast_qp_free(p);
+ }
+ if (last) {
+ atomic_dec(&mcast->refcount);
+ wait_event(mcast->wait, !atomic_read(&mcast->refcount));
+ ipath_mcast_free(mcast);
+ spin_lock_irq(&dev->n_mcast_grps_lock);
+ dev->n_mcast_grps_allocated--;
+ spin_unlock_irq(&dev->n_mcast_grps_lock);
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+int ipath_mcast_tree_empty(void)
+{
+ return mcast_tree.rb_node == NULL;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file is conditionally built on PowerPC only. Otherwise weak symbol
+ * versions of the functions exported from here are used.
+ */
+
+#include "ipath_kernel.h"
+
+/**
+ * ipath_enable_wc - enable write combining for MMIO writes to the device
+ * @dd: infinipath device
+ *
+ * Nothing to do on PowerPC, so just return without error.
+ */
+int ipath_enable_wc(struct ipath_devdata *dd)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file is conditionally built on x86_64 only. Otherwise weak symbol
+ * versions of the functions exported from here are used.
+ */
+
+#include <linux/pci.h>
+#include <asm/processor.h>
+
+#include "ipath_kernel.h"
+
+/**
+ * ipath_enable_wc - enable write combining for MMIO writes to the device
+ * @dd: infinipath device
+ *
+ * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
+ * write combining.
+ */
+int ipath_enable_wc(struct ipath_devdata *dd)
+{
+ int ret = 0;
+ u64 pioaddr, piolen;
+ unsigned bits;
+ const unsigned long addr = pci_resource_start(dd->pcidev, 0);
+ const size_t len = pci_resource_len(dd->pcidev, 0);
+
+ /*
+ * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
+ * chip. Linux (possibly the hardware) requires it to be on a power
+ * of 2 address matching the length (which has to be a power of 2).
+ * For rev1, that means the base address, for rev2, it will be just
+ * the PIO buffers themselves.
+ * For chips with two sets of buffers, the calculations are
+ * somewhat more complicated; we need to sum, and the piobufbase
+ * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
+ * The buffers are still packed, so a single range covers both.
+ */
+ if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
+ unsigned long pio2kbase, pio4kbase;
+ pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
+ pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
+ if (pio2kbase < pio4kbase) { /* all, for now */
+ pioaddr = addr + pio2kbase;
+ piolen = pio4kbase - pio2kbase +
+ dd->ipath_piobcnt4k * dd->ipath_4kalign;
+ } else {
+ pioaddr = addr + pio4kbase;
+ piolen = pio2kbase - pio4kbase +
+ dd->ipath_piobcnt2k * dd->ipath_palign;
+ }
+ } else { /* single buffer size (2K, currently) */
+ pioaddr = addr + dd->ipath_piobufbase;
+ piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
+ dd->ipath_piobcnt4k * dd->ipath_4kalign;
+ }
+
+ for (bits = 0; !(piolen & (1ULL << bits)); bits++)
+ /* do nothing */ ;
+
+ if (piolen != (1ULL << bits)) {
+ piolen >>= bits;
+ while (piolen >>= 1)
+ bits++;
+ piolen = 1ULL << (bits + 1);
+ }
+ if (pioaddr & (piolen - 1)) {
+ u64 atmp;
+ ipath_dbg("pioaddr %llx not on right boundary for size "
+ "%llx, fixing\n",
+ (unsigned long long) pioaddr,
+ (unsigned long long) piolen);
+ atmp = pioaddr & ~(piolen - 1);
+ if (atmp < addr || (atmp + piolen) > (addr + len)) {
+ ipath_dev_err(dd, "No way to align address/size "
+ "(%llx/%llx), no WC mtrr\n",
+ (unsigned long long) atmp,
+ (unsigned long long) piolen << 1);
+ ret = -ENODEV;
+ } else {
+ ipath_dbg("changing WC base from %llx to %llx, "
+ "len from %llx to %llx\n",
+ (unsigned long long) pioaddr,
+ (unsigned long long) atmp,
+ (unsigned long long) piolen,
+ (unsigned long long) piolen << 1);
+ pioaddr = atmp;
+ piolen <<= 1;
+ }
+ }
+
+ if (!ret) {
+ dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
+ if (dd->wc_cookie < 0) {
+ ipath_dev_err(dd, "Seting mtrr failed on PIO buffers\n");
+ ret = -ENODEV;
+ } else if (dd->wc_cookie == 0)
+ ipath_cdbg(VERBOSE, "Set mtrr for chip to WC not needed\n");
+ else
+ ipath_cdbg(VERBOSE, "Set mtrr for chip to WC\n");
+ }
+
+ return ret;
+}
+
+/**
+ * ipath_disable_wc - disable write combining for MMIO writes to the device
+ * @dd: infinipath device
+ */
+void ipath_disable_wc(struct ipath_devdata *dd)
+{
+ arch_phys_wc_del(dd->wc_cookie);
+}
projects / openwrt / staging / blogic.git / commitdiff