During development of SDHC support, it was discovered that the definition
for R6 was incorrect. This patch fixes that and patches the drivers that
do switch on the response type.
Signed-off-by: Philip Langdale <philipl@overt.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pavel Pisa <ppisa@pikron.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
case MMC_RSP_R3: /* short */
cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
break;
- case MMC_RSP_R6: /* short CRC */
- cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R6;
- break;
default:
break;
}
break;
case MMC_RSP_R1:
case MMC_RSP_R1B:
- /* resp 1, resp 1b */
+ /* resp 1, 1b, 6, 7 */
resptype = 1;
break;
case MMC_RSP_R2:
case MMC_RSP_R3:
resptype = 3;
break;
- case MMC_RSP_R6:
- resptype = 6;
- break;
default:
dev_err(mmc_dev(host->mmc), "Invalid response type: %04x\n", mmc_resp_type(cmd));
break;
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
switch (RSP_TYPE(mmc_resp_type(cmd))) {
- case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
+ case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
cmdat |= CMDAT_RESP_SHORT;
break;
case RSP_TYPE(MMC_RSP_R3):
case MMC_RSP_R3:
rc |= TIFM_MMCSD_RSP_R3;
break;
- case MMC_RSP_R6:
- rc |= TIFM_MMCSD_RSP_R6;
- break;
default:
BUG();
}
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
-#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))