DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-struct timer_opts *cur_timer __read_mostly = &timer_none;
+/* XXX - necessary to keep things compiling. to be removed later */
+u32 pmtmr_ioport;
/*
* This is a special lock that is owned by the CPU and holds the index
}
EXPORT_SYMBOL(rtc_cmos_write);
-/*
- * This version of gettimeofday has microsecond resolution
- * and better than microsecond precision on fast x86 machines with TSC.
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick;
-
- do {
- unsigned long lost;
-
- seq = read_seqbegin(&xtime_lock);
-
- usec = cur_timer->get_offset();
- lost = jiffies - wall_jiffies;
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0)) {
- max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
- usec = min(usec, max_ntp_tick);
-
- if (lost)
- usec += lost * max_ntp_tick;
- }
- else if (unlikely(lost))
- usec += lost * (USEC_PER_SEC / HZ);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry(&xtime_lock, seq));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= cur_timer->get_offset() * NSEC_PER_USEC;
- nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
static int set_rtc_mmss(unsigned long nowtime)
{
int retval;
-
- WARN_ON(irqs_disabled());
+ unsigned long flags;
/* gets recalled with irq locally disabled */
- spin_lock_irq(&rtc_lock);
+ /* XXX - does irqsave resolve this? -johnstul */
+ spin_lock_irqsave(&rtc_lock, flags);
if (efi_enabled)
retval = efi_set_rtc_mmss(nowtime);
else
retval = mach_set_rtc_mmss(nowtime);
- spin_unlock_irq(&rtc_lock);
+ spin_unlock_irqrestore(&rtc_lock, flags);
return retval;
}
int timer_ack;
-/* monotonic_clock(): returns # of nanoseconds passed since time_init()
- * Note: This function is required to return accurate
- * time even in the absence of multiple timer ticks.
- */
-unsigned long long monotonic_clock(void)
-{
- return cur_timer->monotonic_clock();
-}
-EXPORT_SYMBOL(monotonic_clock);
-
#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
unsigned long profile_pc(struct pt_regs *regs)
{
#endif
/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
*/
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_seqlock(&xtime_lock);
+
#ifdef CONFIG_X86_IO_APIC
if (timer_ack) {
/*
irq = inb_p( 0x61 ); /* read the current state */
outb_p( irq|0x80, 0x61 ); /* reset the IRQ */
}
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_seqlock(&xtime_lock);
-
- cur_timer->mark_offset();
-
- do_timer_interrupt(irq, regs);
write_sequnlock(&xtime_lock);
static long clock_cmos_diff, sleep_start;
-static struct timer_opts *last_timer;
static int timer_suspend(struct sys_device *dev, pm_message_t state)
{
/*
clock_cmos_diff = -get_cmos_time();
clock_cmos_diff += get_seconds();
sleep_start = get_cmos_time();
- last_timer = cur_timer;
- cur_timer = &timer_none;
- if (last_timer->suspend)
- last_timer->suspend(state);
return 0;
}
jiffies_64 += sleep_length;
wall_jiffies += sleep_length;
write_sequnlock_irqrestore(&xtime_lock, flags);
- if (last_timer->resume)
- last_timer->resume();
- cur_timer = last_timer;
- last_timer = NULL;
touch_softlockup_watchdog();
return 0;
}
printk("Using HPET for base-timer\n");
}
- cur_timer = select_timer();
- printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
-
time_init_hook();
}
#endif
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
- cur_timer = select_timer();
- printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
-
time_init_hook();
}
* we have to worry about.
*/
+#include <linux/module.h>
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/delay.h>
-#include <linux/module.h>
+
#include <asm/processor.h>
#include <asm/delay.h>
#include <asm/timer.h>
#ifdef CONFIG_SMP
-#include <asm/smp.h>
#endif
-extern struct timer_opts* timer;
+/* simple loop based delay: */
+static void delay_loop(unsigned long loops)
+{
+ int d0;
+
+ __asm__ __volatile__(
+ "\tjmp 1f\n"
+ ".align 16\n"
+ "1:\tjmp 2f\n"
+ ".align 16\n"
+ "2:\tdecl %0\n\tjns 2b"
+ :"=&a" (d0)
+ :"0" (loops));
+}
+
+/* TSC based delay: */
+static void delay_tsc(unsigned long loops)
+{
+ unsigned long bclock, now;
+
+ rdtscl(bclock);
+ do {
+ rep_nop();
+ rdtscl(now);
+ } while ((now-bclock) < loops);
+}
+
+/*
+ * Since we calibrate only once at boot, this
+ * function should be set once at boot and not changed
+ */
+static void (*delay_fn)(unsigned long) = delay_loop;
+
+void use_tsc_delay(void)
+{
+ delay_fn = delay_tsc;
+}
+
+int read_current_timer(unsigned long *timer_val)
+{
+ if (delay_fn == delay_tsc) {
+ rdtscl(*timer_val);
+ return 0;
+ }
+ return -1;
+}
void __delay(unsigned long loops)
{
- cur_timer->delay(loops);
+ delay_fn(loops);
}
inline void __const_udelay(unsigned long xloops)
{
int d0;
+
xloops *= 4;
__asm__("mull %0"
:"=d" (xloops), "=&a" (d0)
- :"1" (xloops),"0" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4)));
- __delay(++xloops);
+ :"1" (xloops), "0"
+ (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4)));
+
+ __delay(++xloops);
}
void __udelay(unsigned long usecs)
{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
+ __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
}
void __ndelay(unsigned long nsecs)
{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
+ __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
EXPORT_SYMBOL(__delay);
#include <linux/init.h>
#include <linux/pm.h>
-/**
- * struct timer_ops - used to define a timer source
- *
- * @name: name of the timer.
- * @init: Probes and initializes the timer. Takes clock= override
- * string as an argument. Returns 0 on success, anything else
- * on failure.
- * @mark_offset: called by the timer interrupt.
- * @get_offset: called by gettimeofday(). Returns the number of microseconds
- * since the last timer interupt.
- * @monotonic_clock: returns the number of nanoseconds since the init of the
- * timer.
- * @delay: delays this many clock cycles.
- */
-struct timer_opts {
- char* name;
- void (*mark_offset)(void);
- unsigned long (*get_offset)(void);
- unsigned long long (*monotonic_clock)(void);
- void (*delay)(unsigned long);
- unsigned long (*read_timer)(void);
- int (*suspend)(pm_message_t state);
- int (*resume)(void);
-};
-
-struct init_timer_opts {
- int (*init)(char *override);
- struct timer_opts *opts;
-};
-
#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct timer_opts* __init select_timer(void);
-extern void clock_fallback(void);
void setup_pit_timer(void);
-
/* Modifiers for buggy PIT handling */
-
extern int pit_latch_buggy;
-
-extern struct timer_opts *cur_timer;
extern int timer_ack;
-
-/* list of externed timers */
-extern struct timer_opts timer_none;
-extern struct timer_opts timer_pit;
-extern struct init_timer_opts timer_pit_init;
-extern struct init_timer_opts timer_tsc_init;
-#ifdef CONFIG_X86_CYCLONE_TIMER
-extern struct init_timer_opts timer_cyclone_init;
-#endif
-
-extern unsigned long calibrate_tsc(void);
-extern unsigned long read_timer_tsc(void);
-extern void init_cpu_khz(void);
extern int recalibrate_cpu_khz(void);
-#ifdef CONFIG_HPET_TIMER
-extern struct init_timer_opts timer_hpet_init;
-extern unsigned long calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr);
-#endif
-#ifdef CONFIG_X86_PM_TIMER
-extern struct init_timer_opts timer_pmtmr_init;
-#endif
#endif
projects / openwrt / staging / blogic.git / commitdiff