--- /dev/null
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or any later versionas published by the Free Software Foundation.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ * York Sun [at freescale.com]
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+#include <asm/types.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include "ddr.h"
+
+/* Option parameter Structures */
+struct options_string {
+ const char *option_name;
+ size_t offset;
+ unsigned int size;
+ const char printhex;
+};
+
+static unsigned int picos_to_mhz(unsigned int picos)
+{
+ return 1000000 / picos;
+}
+
+static void print_option_table(const struct options_string *table,
+ int table_size,
+ const void *base)
+{
+ unsigned int i;
+ unsigned int *ptr;
+ unsigned long long *ptr_l;
+
+ for (i = 0; i < table_size; i++) {
+ switch (table[i].size) {
+ case 4:
+ ptr = (unsigned int *) (base + table[i].offset);
+ if (table[i].printhex) {
+ printf("%s = 0x%08X\n",
+ table[i].option_name, *ptr);
+ } else {
+ printf("%s = %u\n",
+ table[i].option_name, *ptr);
+ }
+ break;
+ case 8:
+ ptr_l = (unsigned long long *) (base + table[i].offset);
+ printf("%s = %llu\n",
+ table[i].option_name, *ptr_l);
+ break;
+ default:
+ printf("Unrecognized size!\n");
+ break;
+ }
+ }
+}
+
+static int handle_option_table(const struct options_string *table,
+ int table_size,
+ void *base,
+ const char *opt,
+ const char *val)
+{
+ unsigned int i;
+ unsigned int value, *ptr;
+ unsigned long long value_l, *ptr_l;
+
+ for (i = 0; i < table_size; i++) {
+ if (strcmp(table[i].option_name, opt) != 0)
+ continue;
+ switch (table[i].size) {
+ case 4:
+ value = simple_strtoul(val, NULL, 0);
+ ptr = base + table[i].offset;
+ *ptr = value;
+ break;
+ case 8:
+ value_l = simple_strtoull(val, NULL, 0);
+ ptr_l = base + table[i].offset;
+ *ptr_l = value_l;
+ break;
+ default:
+ printf("Unrecognized size!\n");
+ break;
+ }
+ return 1;
+ }
+
+ return 0;
+}
+
+static void fsl_ddr_generic_edit(void *pdata,
+ void *pend,
+ unsigned int element_size,
+ unsigned int element_num,
+ unsigned int value)
+{
+ char *pcdata = (char *)pdata; /* BIG ENDIAN ONLY */
+
+ pcdata += element_num * element_size;
+ if ((pcdata + element_size) > (char *) pend) {
+ printf("trying to write past end of data\n");
+ return;
+ }
+
+ switch (element_size) {
+ case 1:
+ __raw_writeb(value, pcdata);
+ break;
+ case 2:
+ __raw_writew(value, pcdata);
+ break;
+ case 4:
+ __raw_writel(value, pcdata);
+ break;
+ default:
+ printf("unexpected element size %u\n", element_size);
+ break;
+ }
+}
+
+static void fsl_ddr_spd_edit(fsl_ddr_info_t *pinfo,
+ unsigned int ctrl_num,
+ unsigned int dimm_num,
+ unsigned int element_num,
+ unsigned int value)
+{
+ generic_spd_eeprom_t *pspd;
+
+ pspd = &(pinfo->spd_installed_dimms[ctrl_num][dimm_num]);
+ fsl_ddr_generic_edit(pspd, pspd + 1, 1, element_num, value);
+}
+
+#define COMMON_TIMING(x) {#x, offsetof(common_timing_params_t, x), \
+ sizeof((common_timing_params_t *)0)->x, 0}
+
+static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
+ unsigned int ctrl_num,
+ const char *optname_str,
+ const char *value_str)
+{
+ common_timing_params_t *p = &pinfo->common_timing_params[ctrl_num];
+
+ static const struct options_string options[] = {
+ COMMON_TIMING(tCKmin_X_ps),
+ COMMON_TIMING(tCKmax_ps),
+ COMMON_TIMING(tCKmax_max_ps),
+ COMMON_TIMING(tRCD_ps),
+ COMMON_TIMING(tRP_ps),
+ COMMON_TIMING(tRAS_ps),
+ COMMON_TIMING(tWR_ps),
+ COMMON_TIMING(tWTR_ps),
+ COMMON_TIMING(tRFC_ps),
+ COMMON_TIMING(tRRD_ps),
+ COMMON_TIMING(tRC_ps),
+ COMMON_TIMING(refresh_rate_ps),
+ COMMON_TIMING(tIS_ps),
+ COMMON_TIMING(tIH_ps),
+ COMMON_TIMING(tDS_ps),
+ COMMON_TIMING(tDH_ps),
+ COMMON_TIMING(tRTP_ps),
+ COMMON_TIMING(tDQSQ_max_ps),
+ COMMON_TIMING(tQHS_ps),
+ COMMON_TIMING(ndimms_present),
+ COMMON_TIMING(lowest_common_SPD_caslat),
+ COMMON_TIMING(highest_common_derated_caslat),
+ COMMON_TIMING(additive_latency),
+ COMMON_TIMING(all_DIMMs_burst_lengths_bitmask),
+ COMMON_TIMING(all_DIMMs_registered),
+ COMMON_TIMING(all_DIMMs_unbuffered),
+ COMMON_TIMING(all_DIMMs_ECC_capable),
+ COMMON_TIMING(total_mem),
+ COMMON_TIMING(base_address),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ if (handle_option_table(options, n_opts, p, optname_str, value_str))
+ return;
+
+ printf("Error: couldn't find option string %s\n", optname_str);
+}
+
+#define DIMM_PARM(x) {#x, offsetof(dimm_params_t, x), \
+ sizeof((dimm_params_t *)0)->x, 0}
+
+static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
+ unsigned int ctrl_num,
+ unsigned int dimm_num,
+ const char *optname_str,
+ const char *value_str)
+{
+ dimm_params_t *p = &(pinfo->dimm_params[ctrl_num][dimm_num]);
+
+ static const struct options_string options[] = {
+ DIMM_PARM(n_ranks),
+ DIMM_PARM(data_width),
+ DIMM_PARM(primary_sdram_width),
+ DIMM_PARM(ec_sdram_width),
+ DIMM_PARM(registered_dimm),
+
+ DIMM_PARM(n_row_addr),
+ DIMM_PARM(n_col_addr),
+ DIMM_PARM(edc_config),
+ DIMM_PARM(n_banks_per_sdram_device),
+ DIMM_PARM(burst_lengths_bitmask),
+ DIMM_PARM(row_density),
+
+ DIMM_PARM(tCKmin_X_ps),
+ DIMM_PARM(tCKmin_X_minus_1_ps),
+ DIMM_PARM(tCKmin_X_minus_2_ps),
+ DIMM_PARM(tCKmax_ps),
+
+ DIMM_PARM(caslat_X),
+ DIMM_PARM(caslat_X_minus_1),
+ DIMM_PARM(caslat_X_minus_2),
+
+ DIMM_PARM(caslat_lowest_derated),
+
+ DIMM_PARM(tRCD_ps),
+ DIMM_PARM(tRP_ps),
+ DIMM_PARM(tRAS_ps),
+ DIMM_PARM(tWR_ps),
+ DIMM_PARM(tWTR_ps),
+ DIMM_PARM(tRFC_ps),
+ DIMM_PARM(tRRD_ps),
+ DIMM_PARM(tRC_ps),
+ DIMM_PARM(refresh_rate_ps),
+
+ DIMM_PARM(tIS_ps),
+ DIMM_PARM(tIH_ps),
+ DIMM_PARM(tDS_ps),
+ DIMM_PARM(tDH_ps),
+ DIMM_PARM(tRTP_ps),
+ DIMM_PARM(tDQSQ_max_ps),
+ DIMM_PARM(tQHS_ps),
+
+ DIMM_PARM(rank_density),
+ DIMM_PARM(capacity),
+ DIMM_PARM(base_address),
+ };
+
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ if (handle_option_table(options, n_opts, p, optname_str, value_str))
+ return;
+
+ printf("couldn't find option string %s\n", optname_str);
+}
+
+static void print_dimm_parameters(const dimm_params_t *pdimm)
+{
+ static const struct options_string options[] = {
+ DIMM_PARM(n_ranks),
+ DIMM_PARM(data_width),
+ DIMM_PARM(primary_sdram_width),
+ DIMM_PARM(ec_sdram_width),
+ DIMM_PARM(registered_dimm),
+
+ DIMM_PARM(n_row_addr),
+ DIMM_PARM(n_col_addr),
+ DIMM_PARM(edc_config),
+ DIMM_PARM(n_banks_per_sdram_device),
+
+ DIMM_PARM(tCKmin_X_ps),
+ DIMM_PARM(tCKmin_X_minus_1_ps),
+ DIMM_PARM(tCKmin_X_minus_2_ps),
+ DIMM_PARM(tCKmax_ps),
+
+ DIMM_PARM(caslat_X),
+ DIMM_PARM(tAA_ps),
+ DIMM_PARM(caslat_X_minus_1),
+ DIMM_PARM(caslat_X_minus_2),
+ DIMM_PARM(caslat_lowest_derated),
+
+ DIMM_PARM(tRCD_ps),
+ DIMM_PARM(tRP_ps),
+ DIMM_PARM(tRAS_ps),
+ DIMM_PARM(tWR_ps),
+ DIMM_PARM(tWTR_ps),
+ DIMM_PARM(tRFC_ps),
+ DIMM_PARM(tRRD_ps),
+ DIMM_PARM(tRC_ps),
+ DIMM_PARM(refresh_rate_ps),
+
+ DIMM_PARM(tIS_ps),
+ DIMM_PARM(tIH_ps),
+ DIMM_PARM(tDS_ps),
+ DIMM_PARM(tDH_ps),
+ DIMM_PARM(tRTP_ps),
+ DIMM_PARM(tDQSQ_max_ps),
+ DIMM_PARM(tQHS_ps),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ if (pdimm->n_ranks == 0) {
+ printf("DIMM not present\n");
+ return;
+ }
+ printf("DIMM organization parameters:\n");
+ printf("module part name = %s\n", pdimm->mpart);
+ printf("rank_density = %llu bytes (%llu megabytes)\n",
+ pdimm->rank_density, pdimm->rank_density / 0x100000);
+ printf("capacity = %llu bytes (%llu megabytes)\n",
+ pdimm->capacity, pdimm->capacity / 0x100000);
+ printf("burst_lengths_bitmask = %02X\n",
+ pdimm->burst_lengths_bitmask);
+ printf("base_addresss = %llu (%08llX %08llX)\n",
+ pdimm->base_address,
+ (pdimm->base_address >> 32),
+ pdimm->base_address & 0xFFFFFFFF);
+ print_option_table(options, n_opts, pdimm);
+}
+
+static void print_lowest_common_dimm_parameters(
+ const common_timing_params_t *plcd_dimm_params)
+{
+ static const struct options_string options[] = {
+ COMMON_TIMING(tCKmax_max_ps),
+ COMMON_TIMING(tRCD_ps),
+ COMMON_TIMING(tRP_ps),
+ COMMON_TIMING(tRAS_ps),
+ COMMON_TIMING(tWR_ps),
+ COMMON_TIMING(tWTR_ps),
+ COMMON_TIMING(tRFC_ps),
+ COMMON_TIMING(tRRD_ps),
+ COMMON_TIMING(tRC_ps),
+ COMMON_TIMING(refresh_rate_ps),
+ COMMON_TIMING(tIS_ps),
+ COMMON_TIMING(tDS_ps),
+ COMMON_TIMING(tDH_ps),
+ COMMON_TIMING(tRTP_ps),
+ COMMON_TIMING(tDQSQ_max_ps),
+ COMMON_TIMING(tQHS_ps),
+ COMMON_TIMING(lowest_common_SPD_caslat),
+ COMMON_TIMING(highest_common_derated_caslat),
+ COMMON_TIMING(additive_latency),
+ COMMON_TIMING(ndimms_present),
+ COMMON_TIMING(all_DIMMs_registered),
+ COMMON_TIMING(all_DIMMs_unbuffered),
+ COMMON_TIMING(all_DIMMs_ECC_capable),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ /* Clock frequencies */
+ printf("tCKmin_X_ps = %u (%u MHz)\n",
+ plcd_dimm_params->tCKmin_X_ps,
+ picos_to_mhz(plcd_dimm_params->tCKmin_X_ps));
+ printf("tCKmax_ps = %u (%u MHz)\n",
+ plcd_dimm_params->tCKmax_ps,
+ picos_to_mhz(plcd_dimm_params->tCKmax_ps));
+ printf("all_DIMMs_burst_lengths_bitmask = %02X\n",
+ plcd_dimm_params->all_DIMMs_burst_lengths_bitmask);
+
+ print_option_table(options, n_opts, plcd_dimm_params);
+
+ printf("total_mem = %llu (%llu megabytes)\n",
+ plcd_dimm_params->total_mem,
+ plcd_dimm_params->total_mem / 0x100000);
+ printf("base_address = %llu (%llu megabytes)\n",
+ plcd_dimm_params->base_address,
+ plcd_dimm_params->base_address / 0x100000);
+}
+
+#define CTRL_OPTIONS(x) {#x, offsetof(memctl_options_t, x), \
+ sizeof((memctl_options_t *)0)->x, 0}
+#define CTRL_OPTIONS_CS(x, y) {"cs" #x "_" #y, \
+ offsetof(memctl_options_t, cs_local_opts[x].y), \
+ sizeof((memctl_options_t *)0)->cs_local_opts[x].y, 0}
+
+static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
+ unsigned int ctl_num,
+ const char *optname_str,
+ const char *value_str)
+{
+ memctl_options_t *p = &(pinfo->memctl_opts[ctl_num]);
+ /*
+ * This array all on the stack and *computed* each time this
+ * function is rung.
+ */
+ static const struct options_string options[] = {
+ CTRL_OPTIONS_CS(0, odt_rd_cfg),
+ CTRL_OPTIONS_CS(0, odt_wr_cfg),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CTRL_OPTIONS_CS(1, odt_rd_cfg),
+ CTRL_OPTIONS_CS(1, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(2, odt_rd_cfg),
+ CTRL_OPTIONS_CS(2, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(3, odt_rd_cfg),
+ CTRL_OPTIONS_CS(3, odt_wr_cfg),
+#endif
+#if defined(CONFIG_FSL_DDR3)
+ CTRL_OPTIONS_CS(0, odt_rtt_norm),
+ CTRL_OPTIONS_CS(0, odt_rtt_wr),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CTRL_OPTIONS_CS(1, odt_rtt_norm),
+ CTRL_OPTIONS_CS(1, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(2, odt_rtt_norm),
+ CTRL_OPTIONS_CS(2, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(3, odt_rtt_norm),
+ CTRL_OPTIONS_CS(3, odt_rtt_wr),
+#endif
+#endif
+ CTRL_OPTIONS(memctl_interleaving),
+ CTRL_OPTIONS(memctl_interleaving_mode),
+ CTRL_OPTIONS(ba_intlv_ctl),
+ CTRL_OPTIONS(ECC_mode),
+ CTRL_OPTIONS(ECC_init_using_memctl),
+ CTRL_OPTIONS(DQS_config),
+ CTRL_OPTIONS(self_refresh_in_sleep),
+ CTRL_OPTIONS(dynamic_power),
+ CTRL_OPTIONS(data_bus_width),
+ CTRL_OPTIONS(burst_length),
+ CTRL_OPTIONS(cas_latency_override),
+ CTRL_OPTIONS(cas_latency_override_value),
+ CTRL_OPTIONS(use_derated_caslat),
+ CTRL_OPTIONS(additive_latency_override),
+ CTRL_OPTIONS(additive_latency_override_value),
+ CTRL_OPTIONS(clk_adjust),
+ CTRL_OPTIONS(cpo_override),
+ CTRL_OPTIONS(write_data_delay),
+ CTRL_OPTIONS(half_strength_driver_enable),
+
+ /*
+ * These can probably be changed to 2T_EN and 3T_EN
+ * (using a leading numerical character) without problem
+ */
+ CTRL_OPTIONS(twoT_en),
+ CTRL_OPTIONS(threeT_en),
+ CTRL_OPTIONS(ap_en),
+ CTRL_OPTIONS(bstopre),
+ CTRL_OPTIONS(wrlvl_override),
+ CTRL_OPTIONS(wrlvl_sample),
+ CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS(rcw_override),
+ CTRL_OPTIONS(rcw_1),
+ CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
+ CTRL_OPTIONS(tFAW_window_four_activates_ps),
+ CTRL_OPTIONS(trwt_override),
+ CTRL_OPTIONS(trwt),
+ };
+
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ if (handle_option_table(options, n_opts, p,
+ optname_str, value_str))
+ return;
+
+ printf("couldn't find option string %s\n", optname_str);
+}
+
+#define CFG_REGS(x) {#x, offsetof(fsl_ddr_cfg_regs_t, x), \
+ sizeof((fsl_ddr_cfg_regs_t *)0)->x, 1}
+#define CFG_REGS_CS(x, y) {"cs" #x "_" #y, \
+ offsetof(fsl_ddr_cfg_regs_t, cs[x].y), \
+ sizeof((fsl_ddr_cfg_regs_t *)0)->cs[x].y, 1}
+
+static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int i;
+ static const struct options_string options[] = {
+ CFG_REGS_CS(0, bnds),
+ CFG_REGS_CS(0, config),
+ CFG_REGS_CS(0, config_2),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CFG_REGS_CS(1, bnds),
+ CFG_REGS_CS(1, config),
+ CFG_REGS_CS(1, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CFG_REGS_CS(2, bnds),
+ CFG_REGS_CS(2, config),
+ CFG_REGS_CS(2, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CFG_REGS_CS(3, bnds),
+ CFG_REGS_CS(3, config),
+ CFG_REGS_CS(3, config_2),
+#endif
+ CFG_REGS(timing_cfg_3),
+ CFG_REGS(timing_cfg_0),
+ CFG_REGS(timing_cfg_1),
+ CFG_REGS(timing_cfg_2),
+ CFG_REGS(ddr_sdram_cfg),
+ CFG_REGS(ddr_sdram_cfg_2),
+ CFG_REGS(ddr_sdram_mode),
+ CFG_REGS(ddr_sdram_mode_2),
+ CFG_REGS(ddr_sdram_mode_3),
+ CFG_REGS(ddr_sdram_mode_4),
+ CFG_REGS(ddr_sdram_mode_5),
+ CFG_REGS(ddr_sdram_mode_6),
+ CFG_REGS(ddr_sdram_mode_7),
+ CFG_REGS(ddr_sdram_mode_8),
+ CFG_REGS(ddr_sdram_interval),
+ CFG_REGS(ddr_data_init),
+ CFG_REGS(ddr_sdram_clk_cntl),
+ CFG_REGS(ddr_init_addr),
+ CFG_REGS(ddr_init_ext_addr),
+ CFG_REGS(timing_cfg_4),
+ CFG_REGS(timing_cfg_5),
+ CFG_REGS(ddr_zq_cntl),
+ CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_sr_cntr),
+ CFG_REGS(ddr_sdram_rcw_1),
+ CFG_REGS(ddr_sdram_rcw_2),
+ CFG_REGS(ddr_cdr1),
+ CFG_REGS(ddr_cdr2),
+ CFG_REGS(err_disable),
+ CFG_REGS(err_int_en),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ print_option_table(options, n_opts, ddr);
+
+ for (i = 0; i < 32; i++)
+ printf("debug_%02d = 0x%08X\n", i+1, ddr->debug[i]);
+}
+
+static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
+ unsigned int ctrl_num,
+ const char *regname,
+ const char *value_str)
+{
+ unsigned int i;
+ fsl_ddr_cfg_regs_t *ddr;
+ char buf[20];
+ static const struct options_string options[] = {
+ CFG_REGS_CS(0, bnds),
+ CFG_REGS_CS(0, config),
+ CFG_REGS_CS(0, config_2),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CFG_REGS_CS(1, bnds),
+ CFG_REGS_CS(1, config),
+ CFG_REGS_CS(1, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CFG_REGS_CS(2, bnds),
+ CFG_REGS_CS(2, config),
+ CFG_REGS_CS(2, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+ CFG_REGS_CS(3, bnds),
+ CFG_REGS_CS(3, config),
+ CFG_REGS_CS(3, config_2),
+#endif
+ CFG_REGS(timing_cfg_3),
+ CFG_REGS(timing_cfg_0),
+ CFG_REGS(timing_cfg_1),
+ CFG_REGS(timing_cfg_2),
+ CFG_REGS(ddr_sdram_cfg),
+ CFG_REGS(ddr_sdram_cfg_2),
+ CFG_REGS(ddr_sdram_mode),
+ CFG_REGS(ddr_sdram_mode_2),
+ CFG_REGS(ddr_sdram_mode_3),
+ CFG_REGS(ddr_sdram_mode_4),
+ CFG_REGS(ddr_sdram_mode_5),
+ CFG_REGS(ddr_sdram_mode_6),
+ CFG_REGS(ddr_sdram_mode_7),
+ CFG_REGS(ddr_sdram_mode_8),
+ CFG_REGS(ddr_sdram_interval),
+ CFG_REGS(ddr_data_init),
+ CFG_REGS(ddr_sdram_clk_cntl),
+ CFG_REGS(ddr_init_addr),
+ CFG_REGS(ddr_init_ext_addr),
+ CFG_REGS(timing_cfg_4),
+ CFG_REGS(timing_cfg_5),
+ CFG_REGS(ddr_zq_cntl),
+ CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_sr_cntr),
+ CFG_REGS(ddr_sdram_rcw_1),
+ CFG_REGS(ddr_sdram_rcw_2),
+ CFG_REGS(ddr_cdr1),
+ CFG_REGS(ddr_cdr2),
+ CFG_REGS(err_disable),
+ CFG_REGS(err_int_en),
+ CFG_REGS(ddr_sdram_rcw_2),
+ CFG_REGS(ddr_sdram_rcw_2),
+
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ debug("fsl_ddr_regs_edit: ctrl_num = %u, "
+ "regname = %s, value = %s\n",
+ ctrl_num, regname, value_str);
+ if (ctrl_num > CONFIG_NUM_DDR_CONTROLLERS)
+ return;
+
+ ddr = &(pinfo->fsl_ddr_config_reg[ctrl_num]);
+
+ if (handle_option_table(options, n_opts, ddr, regname, value_str))
+ return;
+
+ for (i = 0; i < 32; i++) {
+ unsigned int value = simple_strtoul(value_str, NULL, 0);
+ sprintf(buf, "debug_%u", i + 1);
+ if (strcmp(buf, regname) == 0) {
+ ddr->debug[i] = value;
+ return;
+ }
+ }
+ printf("Error: couldn't find register string %s\n", regname);
+}
+
+#define CTRL_OPTIONS_HEX(x) {#x, offsetof(memctl_options_t, x), \
+ sizeof((memctl_options_t *)0)->x, 1}
+
+static void print_memctl_options(const memctl_options_t *popts)
+{
+ static const struct options_string options[] = {
+ CTRL_OPTIONS_CS(0, odt_rd_cfg),
+ CTRL_OPTIONS_CS(0, odt_wr_cfg),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CTRL_OPTIONS_CS(1, odt_rd_cfg),
+ CTRL_OPTIONS_CS(1, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(2, odt_rd_cfg),
+ CTRL_OPTIONS_CS(2, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+ CTRL_OPTIONS_CS(3, odt_rd_cfg),
+ CTRL_OPTIONS_CS(3, odt_wr_cfg),
+#endif
+#if defined(CONFIG_FSL_DDR3)
+ CTRL_OPTIONS_CS(0, odt_rtt_norm),
+ CTRL_OPTIONS_CS(0, odt_rtt_wr),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+ CTRL_OPTIONS_CS(1, odt_rtt_norm),
+ CTRL_OPTIONS_CS(1, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+ CTRL_OPTIONS_CS(2, odt_rtt_norm),
+ CTRL_OPTIONS_CS(2, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+ CTRL_OPTIONS_CS(3, odt_rtt_norm),
+ CTRL_OPTIONS_CS(3, odt_rtt_wr),
+#endif
+#endif
+ CTRL_OPTIONS(memctl_interleaving),
+ CTRL_OPTIONS(memctl_interleaving_mode),
+ CTRL_OPTIONS_HEX(ba_intlv_ctl),
+ CTRL_OPTIONS(ECC_mode),
+ CTRL_OPTIONS(ECC_init_using_memctl),
+ CTRL_OPTIONS(DQS_config),
+ CTRL_OPTIONS(self_refresh_in_sleep),
+ CTRL_OPTIONS(dynamic_power),
+ CTRL_OPTIONS(data_bus_width),
+ CTRL_OPTIONS(burst_length),
+ CTRL_OPTIONS(cas_latency_override),
+ CTRL_OPTIONS(cas_latency_override_value),
+ CTRL_OPTIONS(use_derated_caslat),
+ CTRL_OPTIONS(additive_latency_override),
+ CTRL_OPTIONS(additive_latency_override_value),
+ CTRL_OPTIONS(clk_adjust),
+ CTRL_OPTIONS(cpo_override),
+ CTRL_OPTIONS(write_data_delay),
+ CTRL_OPTIONS(half_strength_driver_enable),
+ /*
+ * These can probably be changed to 2T_EN and 3T_EN
+ * (using a leading numerical character) without problem
+ */
+ CTRL_OPTIONS(twoT_en),
+ CTRL_OPTIONS(threeT_en),
+ CTRL_OPTIONS(registered_dimm_en),
+ CTRL_OPTIONS(ap_en),
+ CTRL_OPTIONS(bstopre),
+ CTRL_OPTIONS(wrlvl_override),
+ CTRL_OPTIONS(wrlvl_sample),
+ CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS(rcw_override),
+ CTRL_OPTIONS(rcw_1),
+ CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
+ CTRL_OPTIONS(tFAW_window_four_activates_ps),
+ CTRL_OPTIONS(trwt_override),
+ CTRL_OPTIONS(trwt),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+
+ print_option_table(options, n_opts, popts);
+}
+
+#ifdef CONFIG_FSL_DDR1
+void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd)
+{
+ unsigned int i;
+
+ printf("%-3d : %02x %s\n", 0, spd->info_size,
+ " spd->info_size, * 0 # bytes written into serial memory *");
+ printf("%-3d : %02x %s\n", 1, spd->chip_size,
+ " spd->chip_size, * 1 Total # bytes of SPD memory device *");
+ printf("%-3d : %02x %s\n", 2, spd->mem_type,
+ " spd->mem_type, * 2 Fundamental memory type *");
+ printf("%-3d : %02x %s\n", 3, spd->nrow_addr,
+ " spd->nrow_addr, * 3 # of Row Addresses on this assembly *");
+ printf("%-3d : %02x %s\n", 4, spd->ncol_addr,
+ " spd->ncol_addr, * 4 # of Column Addrs on this assembly *");
+ printf("%-3d : %02x %s\n", 5, spd->nrows,
+ " spd->nrows * 5 # of DIMM Banks *");
+ printf("%-3d : %02x %s\n", 6, spd->dataw_lsb,
+ " spd->dataw_lsb, * 6 Data Width lsb of this assembly *");
+ printf("%-3d : %02x %s\n", 7, spd->dataw_msb,
+ " spd->dataw_msb, * 7 Data Width msb of this assembly *");
+ printf("%-3d : %02x %s\n", 8, spd->voltage,
+ " spd->voltage, * 8 Voltage intf std of this assembly *");
+ printf("%-3d : %02x %s\n", 9, spd->clk_cycle,
+ " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *");
+ printf("%-3d : %02x %s\n", 10, spd->clk_access,
+ " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *");
+ printf("%-3d : %02x %s\n", 11, spd->config,
+ " spd->config, * 11 DIMM Configuration type *");
+ printf("%-3d : %02x %s\n", 12, spd->refresh,
+ " spd->refresh, * 12 Refresh Rate/Type *");
+ printf("%-3d : %02x %s\n", 13, spd->primw,
+ " spd->primw, * 13 Primary SDRAM Width *");
+ printf("%-3d : %02x %s\n", 14, spd->ecw,
+ " spd->ecw, * 14 Error Checking SDRAM width *");
+ printf("%-3d : %02x %s\n", 15, spd->min_delay,
+ " spd->min_delay, * 15 Back to Back Random Access *");
+ printf("%-3d : %02x %s\n", 16, spd->burstl,
+ " spd->burstl, * 16 Burst Lengths Supported *");
+ printf("%-3d : %02x %s\n", 17, spd->nbanks,
+ " spd->nbanks, * 17 # of Banks on Each SDRAM Device *");
+ printf("%-3d : %02x %s\n", 18, spd->cas_lat,
+ " spd->cas_lat, * 18 CAS# Latencies Supported *");
+ printf("%-3d : %02x %s\n", 19, spd->cs_lat,
+ " spd->cs_lat, * 19 Chip Select Latency *");
+ printf("%-3d : %02x %s\n", 20, spd->write_lat,
+ " spd->write_lat, * 20 Write Latency/Recovery *");
+ printf("%-3d : %02x %s\n", 21, spd->mod_attr,
+ " spd->mod_attr, * 21 SDRAM Module Attributes *");
+ printf("%-3d : %02x %s\n", 22, spd->dev_attr,
+ " spd->dev_attr, * 22 SDRAM Device Attributes *");
+ printf("%-3d : %02x %s\n", 23, spd->clk_cycle2,
+ " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *");
+ printf("%-3d : %02x %s\n", 24, spd->clk_access2,
+ " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
+ printf("%-3d : %02x %s\n", 25, spd->clk_cycle3,
+ " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *");
+ printf("%-3d : %02x %s\n", 26, spd->clk_access3,
+ " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
+ printf("%-3d : %02x %s\n", 27, spd->trp,
+ " spd->trp, * 27 Min Row Precharge Time (tRP)*");
+ printf("%-3d : %02x %s\n", 28, spd->trrd,
+ " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *");
+ printf("%-3d : %02x %s\n", 29, spd->trcd,
+ " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *");
+ printf("%-3d : %02x %s\n", 30, spd->tras,
+ " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *");
+ printf("%-3d : %02x %s\n", 31, spd->bank_dens,
+ " spd->bank_dens, * 31 Density of each bank on module *");
+ printf("%-3d : %02x %s\n", 32, spd->ca_setup,
+ " spd->ca_setup, * 32 Cmd + Addr signal input setup time *");
+ printf("%-3d : %02x %s\n", 33, spd->ca_hold,
+ " spd->ca_hold, * 33 Cmd and Addr signal input hold time *");
+ printf("%-3d : %02x %s\n", 34, spd->data_setup,
+ " spd->data_setup, * 34 Data signal input setup time *");
+ printf("%-3d : %02x %s\n", 35, spd->data_hold,
+ " spd->data_hold, * 35 Data signal input hold time *");
+ printf("%-3d : %02x %s\n", 36, spd->res_36_40[0],
+ " spd->res_36_40[0], * 36 Reserved / tWR *");
+ printf("%-3d : %02x %s\n", 37, spd->res_36_40[1],
+ " spd->res_36_40[1], * 37 Reserved / tWTR *");
+ printf("%-3d : %02x %s\n", 38, spd->res_36_40[2],
+ " spd->res_36_40[2], * 38 Reserved / tRTP *");
+ printf("%-3d : %02x %s\n", 39, spd->res_36_40[3],
+ " spd->res_36_40[3], * 39 Reserved / mem_probe *");
+ printf("%-3d : %02x %s\n", 40, spd->res_36_40[4],
+ " spd->res_36_40[4], * 40 Reserved / trc,trfc extensions *");
+ printf("%-3d : %02x %s\n", 41, spd->trc,
+ " spd->trc, * 41 Min Active to Auto refresh time tRC *");
+ printf("%-3d : %02x %s\n", 42, spd->trfc,
+ " spd->trfc, * 42 Min Auto to Active period tRFC *");
+ printf("%-3d : %02x %s\n", 43, spd->tckmax,
+ " spd->tckmax, * 43 Max device cycle time tCKmax *");
+ printf("%-3d : %02x %s\n", 44, spd->tdqsq,
+ " spd->tdqsq, * 44 Max DQS to DQ skew *");
+ printf("%-3d : %02x %s\n", 45, spd->tqhs,
+ " spd->tqhs, * 45 Max Read DataHold skew tQHS *");
+ printf("%-3d : %02x %s\n", 46, spd->res_46,
+ " spd->res_46, * 46 Reserved/ PLL Relock time *");
+ printf("%-3d : %02x %s\n", 47, spd->dimm_height,
+ " spd->dimm_height * 47 SDRAM DIMM Height *");
+
+ printf("%-3d-%3d: ", 48, 61);
+
+ for (i = 0; i < 14; i++)
+ printf("%02x", spd->res_48_61[i]);
+
+ printf(" * 48-61 IDD in SPD and Reserved space *\n");
+
+ printf("%-3d : %02x %s\n", 62, spd->spd_rev,
+ " spd->spd_rev, * 62 SPD Data Revision Code *");
+ printf("%-3d : %02x %s\n", 63, spd->cksum,
+ " spd->cksum, * 63 Checksum for bytes 0-62 *");
+ printf("%-3d-%3d: ", 64, 71);
+
+ for (i = 0; i < 8; i++)
+ printf("%02x", spd->mid[i]);
+
+ printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
+ printf("%-3d : %02x %s\n", 72, spd->mloc,
+ " spd->mloc, * 72 Manufacturing Location *");
+
+ printf("%-3d-%3d: >>", 73, 90);
+
+ for (i = 0; i < 18; i++)
+ printf("%c", spd->mpart[i]);
+
+ printf("<<* 73 Manufacturer's Part Number *\n");
+
+ printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
+ "* 91 Revision Code *");
+ printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
+ "* 93 Manufacturing Date *");
+ printf("%-3d-%3d: ", 95, 98);
+
+ for (i = 0; i < 4; i++)
+ printf("%02x", spd->sernum[i]);
+
+ printf("* 95 Assembly Serial Number *\n");
+
+ printf("%-3d-%3d: ", 99, 127);
+
+ for (i = 0; i < 27; i++)
+ printf("%02x", spd->mspec[i]);
+
+ printf("* 99 Manufacturer Specific Data *\n");
+}
+#endif
+
+#ifdef CONFIG_FSL_DDR2
+void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd)
+{
+ unsigned int i;
+
+ printf("%-3d : %02x %s\n", 0, spd->info_size,
+ " spd->info_size, * 0 # bytes written into serial memory *");
+ printf("%-3d : %02x %s\n", 1, spd->chip_size,
+ " spd->chip_size, * 1 Total # bytes of SPD memory device *");
+ printf("%-3d : %02x %s\n", 2, spd->mem_type,
+ " spd->mem_type, * 2 Fundamental memory type *");
+ printf("%-3d : %02x %s\n", 3, spd->nrow_addr,
+ " spd->nrow_addr, * 3 # of Row Addresses on this assembly *");
+ printf("%-3d : %02x %s\n", 4, spd->ncol_addr,
+ " spd->ncol_addr, * 4 # of Column Addrs on this assembly *");
+ printf("%-3d : %02x %s\n", 5, spd->mod_ranks,
+ " spd->mod_ranks * 5 # of Module Rows on this assembly *");
+ printf("%-3d : %02x %s\n", 6, spd->dataw,
+ " spd->dataw, * 6 Data Width of this assembly *");
+ printf("%-3d : %02x %s\n", 7, spd->res_7,
+ " spd->res_7, * 7 Reserved *");
+ printf("%-3d : %02x %s\n", 8, spd->voltage,
+ " spd->voltage, * 8 Voltage intf std of this assembly *");
+ printf("%-3d : %02x %s\n", 9, spd->clk_cycle,
+ " spd->clk_cycle, * 9 SDRAM Cycle time at CL=X *");
+ printf("%-3d : %02x %s\n", 10, spd->clk_access,
+ " spd->clk_access, * 10 SDRAM Access from Clock at CL=X *");
+ printf("%-3d : %02x %s\n", 11, spd->config,
+ " spd->config, * 11 DIMM Configuration type *");
+ printf("%-3d : %02x %s\n", 12, spd->refresh,
+ " spd->refresh, * 12 Refresh Rate/Type *");
+ printf("%-3d : %02x %s\n", 13, spd->primw,
+ " spd->primw, * 13 Primary SDRAM Width *");
+ printf("%-3d : %02x %s\n", 14, spd->ecw,
+ " spd->ecw, * 14 Error Checking SDRAM width *");
+ printf("%-3d : %02x %s\n", 15, spd->res_15,
+ " spd->res_15, * 15 Reserved *");
+ printf("%-3d : %02x %s\n", 16, spd->burstl,
+ " spd->burstl, * 16 Burst Lengths Supported *");
+ printf("%-3d : %02x %s\n", 17, spd->nbanks,
+ " spd->nbanks, * 17 # of Banks on Each SDRAM Device *");
+ printf("%-3d : %02x %s\n", 18, spd->cas_lat,
+ " spd->cas_lat, * 18 CAS# Latencies Supported *");
+ printf("%-3d : %02x %s\n", 19, spd->mech_char,
+ " spd->mech_char, * 19 Mechanical Characteristics *");
+ printf("%-3d : %02x %s\n", 20, spd->dimm_type,
+ " spd->dimm_type, * 20 DIMM type *");
+ printf("%-3d : %02x %s\n", 21, spd->mod_attr,
+ " spd->mod_attr, * 21 SDRAM Module Attributes *");
+ printf("%-3d : %02x %s\n", 22, spd->dev_attr,
+ " spd->dev_attr, * 22 SDRAM Device Attributes *");
+ printf("%-3d : %02x %s\n", 23, spd->clk_cycle2,
+ " spd->clk_cycle2, * 23 Min SDRAM Cycle time at CL=X-1 *");
+ printf("%-3d : %02x %s\n", 24, spd->clk_access2,
+ " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
+ printf("%-3d : %02x %s\n", 25, spd->clk_cycle3,
+ " spd->clk_cycle3, * 25 Min SDRAM Cycle time at CL=X-2 *");
+ printf("%-3d : %02x %s\n", 26, spd->clk_access3,
+ " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
+ printf("%-3d : %02x %s\n", 27, spd->trp,
+ " spd->trp, * 27 Min Row Precharge Time (tRP)*");
+ printf("%-3d : %02x %s\n", 28, spd->trrd,
+ " spd->trrd, * 28 Min Row Active to Row Active (tRRD) *");
+ printf("%-3d : %02x %s\n", 29, spd->trcd,
+ " spd->trcd, * 29 Min RAS to CAS Delay (tRCD) *");
+ printf("%-3d : %02x %s\n", 30, spd->tras,
+ " spd->tras, * 30 Minimum RAS Pulse Width (tRAS) *");
+ printf("%-3d : %02x %s\n", 31, spd->rank_dens,
+ " spd->rank_dens, * 31 Density of each rank on module *");
+ printf("%-3d : %02x %s\n", 32, spd->ca_setup,
+ " spd->ca_setup, * 32 Cmd + Addr signal input setup time *");
+ printf("%-3d : %02x %s\n", 33, spd->ca_hold,
+ " spd->ca_hold, * 33 Cmd and Addr signal input hold time *");
+ printf("%-3d : %02x %s\n", 34, spd->data_setup,
+ " spd->data_setup, * 34 Data signal input setup time *");
+ printf("%-3d : %02x %s\n", 35, spd->data_hold,
+ " spd->data_hold, * 35 Data signal input hold time *");
+ printf("%-3d : %02x %s\n", 36, spd->twr,
+ " spd->twr, * 36 Write Recovery time tWR *");
+ printf("%-3d : %02x %s\n", 37, spd->twtr,
+ " spd->twtr, * 37 Int write to read delay tWTR *");
+ printf("%-3d : %02x %s\n", 38, spd->trtp,
+ " spd->trtp, * 38 Int read to precharge delay tRTP *");
+ printf("%-3d : %02x %s\n", 39, spd->mem_probe,
+ " spd->mem_probe, * 39 Mem analysis probe characteristics *");
+ printf("%-3d : %02x %s\n", 40, spd->trctrfc_ext,
+ " spd->trctrfc_ext, * 40 Extensions to trc and trfc *");
+ printf("%-3d : %02x %s\n", 41, spd->trc,
+ " spd->trc, * 41 Min Active to Auto refresh time tRC *");
+ printf("%-3d : %02x %s\n", 42, spd->trfc,
+ " spd->trfc, * 42 Min Auto to Active period tRFC *");
+ printf("%-3d : %02x %s\n", 43, spd->tckmax,
+ " spd->tckmax, * 43 Max device cycle time tCKmax *");
+ printf("%-3d : %02x %s\n", 44, spd->tdqsq,
+ " spd->tdqsq, * 44 Max DQS to DQ skew *");
+ printf("%-3d : %02x %s\n", 45, spd->tqhs,
+ " spd->tqhs, * 45 Max Read DataHold skew tQHS *");
+ printf("%-3d : %02x %s\n", 46, spd->pll_relock,
+ " spd->pll_relock, * 46 PLL Relock time *");
+ printf("%-3d : %02x %s\n", 47, spd->Tcasemax,
+ " spd->Tcasemax, * 47 Tcasemax *");
+ printf("%-3d : %02x %s\n", 48, spd->psiTAdram,
+ " spd->psiTAdram, * 48 Thermal Resistance of DRAM Package "
+ "from Top (Case) to Ambient (Psi T-A DRAM) *");
+ printf("%-3d : %02x %s\n", 49, spd->dt0_mode,
+ " spd->dt0_mode, * 49 DRAM Case Temperature Rise from "
+ "Ambient due to Activate-Precharge/Mode Bits "
+ "(DT0/Mode Bits) *)");
+ printf("%-3d : %02x %s\n", 50, spd->dt2n_dt2q,
+ " spd->dt2n_dt2q, * 50 DRAM Case Temperature Rise from "
+ "Ambient due to Precharge/Quiet Standby "
+ "(DT2N/DT2Q) *");
+ printf("%-3d : %02x %s\n", 51, spd->dt2p,
+ " spd->dt2p, * 51 DRAM Case Temperature Rise from "
+ "Ambient due to Precharge Power-Down (DT2P) *");
+ printf("%-3d : %02x %s\n", 52, spd->dt3n,
+ " spd->dt3n, * 52 DRAM Case Temperature Rise from "
+ "Ambient due to Active Standby (DT3N) *");
+ printf("%-3d : %02x %s\n", 53, spd->dt3pfast,
+ " spd->dt3pfast, * 53 DRAM Case Temperature Rise from "
+ "Ambient due to Active Power-Down with Fast PDN Exit "
+ "(DT3Pfast) *");
+ printf("%-3d : %02x %s\n", 54, spd->dt3pslow,
+ " spd->dt3pslow, * 54 DRAM Case Temperature Rise from "
+ "Ambient due to Active Power-Down with Slow PDN Exit "
+ "(DT3Pslow) *");
+ printf("%-3d : %02x %s\n", 55, spd->dt4r_dt4r4w,
+ " spd->dt4r_dt4r4w, * 55 DRAM Case Temperature Rise from "
+ "Ambient due to Page Open Burst Read/DT4R4W Mode Bit "
+ "(DT4R/DT4R4W Mode Bit) *");
+ printf("%-3d : %02x %s\n", 56, spd->dt5b,
+ " spd->dt5b, * 56 DRAM Case Temperature Rise from "
+ "Ambient due to Burst Refresh (DT5B) *");
+ printf("%-3d : %02x %s\n", 57, spd->dt7,
+ " spd->dt7, * 57 DRAM Case Temperature Rise from "
+ "Ambient due to Bank Interleave Reads with "
+ "Auto-Precharge (DT7) *");
+ printf("%-3d : %02x %s\n", 58, spd->psiTApll,
+ " spd->psiTApll, * 58 Thermal Resistance of PLL Package form"
+ " Top (Case) to Ambient (Psi T-A PLL) *");
+ printf("%-3d : %02x %s\n", 59, spd->psiTAreg,
+ " spd->psiTAreg, * 59 Thermal Reisitance of Register Package"
+ " from Top (Case) to Ambient (Psi T-A Register) *");
+ printf("%-3d : %02x %s\n", 60, spd->dtpllactive,
+ " spd->dtpllactive, * 60 PLL Case Temperature Rise from "
+ "Ambient due to PLL Active (DT PLL Active) *");
+ printf("%-3d : %02x %s\n", 61, spd->dtregact,
+ " spd->dtregact, "
+ "* 61 Register Case Temperature Rise from Ambient due to "
+ "Register Active/Mode Bit (DT Register Active/Mode Bit) *");
+ printf("%-3d : %02x %s\n", 62, spd->spd_rev,
+ " spd->spd_rev, * 62 SPD Data Revision Code *");
+ printf("%-3d : %02x %s\n", 63, spd->cksum,
+ " spd->cksum, * 63 Checksum for bytes 0-62 *");
+
+ printf("%-3d-%3d: ", 64, 71);
+
+ for (i = 0; i < 8; i++)
+ printf("%02x", spd->mid[i]);
+
+ printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
+
+ printf("%-3d : %02x %s\n", 72, spd->mloc,
+ " spd->mloc, * 72 Manufacturing Location *");
+
+ printf("%-3d-%3d: >>", 73, 90);
+ for (i = 0; i < 18; i++)
+ printf("%c", spd->mpart[i]);
+
+
+ printf("<<* 73 Manufacturer's Part Number *\n");
+
+ printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
+ "* 91 Revision Code *");
+ printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
+ "* 93 Manufacturing Date *");
+ printf("%-3d-%3d: ", 95, 98);
+
+ for (i = 0; i < 4; i++)
+ printf("%02x", spd->sernum[i]);
+
+ printf("* 95 Assembly Serial Number *\n");
+
+ printf("%-3d-%3d: ", 99, 127);
+ for (i = 0; i < 27; i++)
+ printf("%02x", spd->mspec[i]);
+
+
+ printf("* 99 Manufacturer Specific Data *\n");
+}
+#endif
+
+#ifdef CONFIG_FSL_DDR3
+void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
+{
+ unsigned int i;
+
+ /* General Section: Bytes 0-59 */
+
+#define PRINT_NXS(x, y, z...) printf("%-3d : %02x " z "\n", x, y);
+#define PRINT_NNXXS(n0, n1, x0, x1, s) \
+ printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1);
+
+ PRINT_NXS(0, spd->info_size_crc,
+ "info_size_crc bytes written into serial memory, "
+ "CRC coverage");
+ PRINT_NXS(1, spd->spd_rev,
+ "spd_rev SPD Revision");
+ PRINT_NXS(2, spd->mem_type,
+ "mem_type Key Byte / DRAM Device Type");
+ PRINT_NXS(3, spd->module_type,
+ "module_type Key Byte / Module Type");
+ PRINT_NXS(4, spd->density_banks,
+ "density_banks SDRAM Density and Banks");
+ PRINT_NXS(5, spd->addressing,
+ "addressing SDRAM Addressing");
+ PRINT_NXS(6, spd->module_vdd,
+ "module_vdd Module Nominal Voltage, VDD");
+ PRINT_NXS(7, spd->organization,
+ "organization Module Organization");
+ PRINT_NXS(8, spd->bus_width,
+ "bus_width Module Memory Bus Width");
+ PRINT_NXS(9, spd->ftb_div,
+ "ftb_div Fine Timebase (FTB) Dividend / Divisor");
+ PRINT_NXS(10, spd->mtb_dividend,
+ "mtb_dividend Medium Timebase (MTB) Dividend");
+ PRINT_NXS(11, spd->mtb_divisor,
+ "mtb_divisor Medium Timebase (MTB) Divisor");
+ PRINT_NXS(12, spd->tCK_min,
+ "tCK_min SDRAM Minimum Cycle Time");
+ PRINT_NXS(13, spd->res_13,
+ "res_13 Reserved");
+ PRINT_NXS(14, spd->caslat_lsb,
+ "caslat_lsb CAS Latencies Supported, LSB");
+ PRINT_NXS(15, spd->caslat_msb,
+ "caslat_msb CAS Latencies Supported, MSB");
+ PRINT_NXS(16, spd->tAA_min,
+ "tAA_min Min CAS Latency Time");
+ PRINT_NXS(17, spd->tWR_min,
+ "tWR_min Min Write REcovery Time");
+ PRINT_NXS(18, spd->tRCD_min,
+ "tRCD_min Min RAS# to CAS# Delay Time");
+ PRINT_NXS(19, spd->tRRD_min,
+ "tRRD_min Min Row Active to Row Active Delay Time");
+ PRINT_NXS(20, spd->tRP_min,
+ "tRP_min Min Row Precharge Delay Time");
+ PRINT_NXS(21, spd->tRAS_tRC_ext,
+ "tRAS_tRC_ext Upper Nibbles for tRAS and tRC");
+ PRINT_NXS(22, spd->tRAS_min_lsb,
+ "tRAS_min_lsb Min Active to Precharge Delay Time, LSB");
+ PRINT_NXS(23, spd->tRC_min_lsb,
+ "tRC_min_lsb Min Active to Active/Refresh Delay Time, LSB");
+ PRINT_NXS(24, spd->tRFC_min_lsb,
+ "tRFC_min_lsb Min Refresh Recovery Delay Time LSB");
+ PRINT_NXS(25, spd->tRFC_min_msb,
+ "tRFC_min_msb Min Refresh Recovery Delay Time MSB");
+ PRINT_NXS(26, spd->tWTR_min,
+ "tWTR_min Min Internal Write to Read Command Delay Time");
+ PRINT_NXS(27, spd->tRTP_min,
+ "tRTP_min "
+ "Min Internal Read to Precharge Command Delay Time");
+ PRINT_NXS(28, spd->tFAW_msb,
+ "tFAW_msb Upper Nibble for tFAW");
+ PRINT_NXS(29, spd->tFAW_min,
+ "tFAW_min Min Four Activate Window Delay Time");
+ PRINT_NXS(30, spd->opt_features,
+ "opt_features SDRAM Optional Features");
+ PRINT_NXS(31, spd->therm_ref_opt,
+ "therm_ref_opt SDRAM Thermal and Refresh Opts");
+ PRINT_NXS(32, spd->therm_sensor,
+ "therm_sensor SDRAM Thermal Sensor");
+ PRINT_NXS(33, spd->device_type,
+ "device_type SDRAM Device Type");
+
+ printf("%-3d-%3d: ", 34, 59); /* Reserved, General Section */
+
+ for (i = 34; i <= 59; i++)
+ printf("%02x ", spd->res_34_59[i - 34]);
+
+ puts("\n");
+
+ switch (spd->module_type) {
+ case 0x02: /* UDIMM */
+ case 0x03: /* SO-DIMM */
+ case 0x04: /* Micro-DIMM */
+ case 0x06: /* Mini-UDIMM */
+ PRINT_NXS(60, spd->mod_section.unbuffered.mod_height,
+ "mod_height (Unbuffered) Module Nominal Height");
+ PRINT_NXS(61, spd->mod_section.unbuffered.mod_thickness,
+ "mod_thickness (Unbuffered) Module Maximum Thickness");
+ PRINT_NXS(62, spd->mod_section.unbuffered.ref_raw_card,
+ "ref_raw_card (Unbuffered) Reference Raw Card Used");
+ PRINT_NXS(63, spd->mod_section.unbuffered.addr_mapping,
+ "addr_mapping (Unbuffered) Address mapping from "
+ "Edge Connector to DRAM");
+ break;
+ case 0x01: /* RDIMM */
+ case 0x05: /* Mini-RDIMM */
+ PRINT_NXS(60, spd->mod_section.registered.mod_height,
+ "mod_height (Registered) Module Nominal Height");
+ PRINT_NXS(61, spd->mod_section.registered.mod_thickness,
+ "mod_thickness (Registered) Module Maximum Thickness");
+ PRINT_NXS(62, spd->mod_section.registered.ref_raw_card,
+ "ref_raw_card (Registered) Reference Raw Card Used");
+ PRINT_NXS(63, spd->mod_section.registered.modu_attr,
+ "modu_attr (Registered) DIMM Module Attributes");
+ PRINT_NXS(64, spd->mod_section.registered.thermal,
+ "thermal (Registered) Thermal Heat "
+ "Spreader Solution");
+ PRINT_NXS(65, spd->mod_section.registered.reg_id_lo,
+ "reg_id_lo (Registered) Register Manufacturer ID "
+ "Code, LSB");
+ PRINT_NXS(66, spd->mod_section.registered.reg_id_hi,
+ "reg_id_hi (Registered) Register Manufacturer ID "
+ "Code, MSB");
+ PRINT_NXS(67, spd->mod_section.registered.reg_rev,
+ "reg_rev (Registered) Register "
+ "Revision Number");
+ PRINT_NXS(68, spd->mod_section.registered.reg_type,
+ "reg_type (Registered) Register Type");
+ for (i = 69; i <= 76; i++) {
+ printf("%-3d : %02x rcw[%d]\n", i,
+ spd->mod_section.registered.rcw[i-69], i-69);
+ }
+ break;
+ default:
+ /* Module-specific Section, Unsupported Module Type */
+ printf("%-3d-%3d: ", 60, 116);
+
+ for (i = 60; i <= 116; i++)
+ printf("%02x", spd->mod_section.uc[i - 60]);
+
+ break;
+ }
+
+ /* Unique Module ID: Bytes 117-125 */
+ PRINT_NXS(117, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106");
+ PRINT_NXS(118, spd->mmid_msb, "Module MfgID Code MSB - JEP-106");
+ PRINT_NXS(119, spd->mloc, "Mfg Location");
+ PRINT_NNXXS(120, 121, spd->mdate[0], spd->mdate[1], "Mfg Date");
+
+ printf("%-3d-%3d: ", 122, 125);
+
+ for (i = 122; i <= 125; i++)
+ printf("%02x ", spd->sernum[i - 122]);
+ printf(" Module Serial Number\n");
+
+ /* CRC: Bytes 126-127 */
+ PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], " SPD CRC");
+
+ /* Other Manufacturer Fields and User Space: Bytes 128-255 */
+ printf("%-3d-%3d: ", 128, 145);
+ for (i = 128; i <= 145; i++)
+ printf("%02x ", spd->mpart[i - 128]);
+ printf(" Mfg's Module Part Number\n");
+
+ PRINT_NNXXS(146, 147, spd->mrev[0], spd->mrev[1],
+ "Module Revision code");
+
+ PRINT_NXS(148, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106");
+ PRINT_NXS(149, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106");
+
+ printf("%-3d-%3d: ", 150, 175);
+ for (i = 150; i <= 175; i++)
+ printf("%02x ", spd->msd[i - 150]);
+ printf(" Mfg's Specific Data\n");
+
+ printf("%-3d-%3d: ", 176, 255);
+ for (i = 176; i <= 255; i++)
+ printf("%02x", spd->cust[i - 176]);
+ printf(" Mfg's Specific Data\n");
+
+}
+#endif
+
+static inline void generic_spd_dump(const generic_spd_eeprom_t *spd)
+{
+#if defined(CONFIG_FSL_DDR1)
+ ddr1_spd_dump(spd);
+#elif defined(CONFIG_FSL_DDR2)
+ ddr2_spd_dump(spd);
+#elif defined(CONFIG_FSL_DDR3)
+ ddr3_spd_dump(spd);
+#endif
+}
+
+static void fsl_ddr_printinfo(const fsl_ddr_info_t *pinfo,
+ unsigned int ctrl_mask,
+ unsigned int dimm_mask,
+ unsigned int do_mask)
+{
+ unsigned int i, j, retval;
+
+ /* STEP 1: DIMM SPD data */
+ if (do_mask & STEP_GET_SPD) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ if (!(dimm_mask & (1 << j)))
+ continue;
+
+ printf("SPD info: Controller=%u "
+ "DIMM=%u\n", i, j);
+ generic_spd_dump(
+ &(pinfo->spd_installed_dimms[i][j]));
+ printf("\n");
+ }
+ printf("\n");
+ }
+ printf("\n");
+ }
+
+ /* STEP 2: DIMM Parameters */
+ if (do_mask & STEP_COMPUTE_DIMM_PARMS) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ if (!(dimm_mask & (1 << j)))
+ continue;
+ printf("DIMM parameters: Controller=%u "
+ "DIMM=%u\n", i, j);
+ print_dimm_parameters(
+ &(pinfo->dimm_params[i][j]));
+ printf("\n");
+ }
+ printf("\n");
+ }
+ printf("\n");
+ }
+
+ /* STEP 3: Common Parameters */
+ if (do_mask & STEP_COMPUTE_COMMON_PARMS) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+ printf("\"lowest common\" DIMM parameters: "
+ "Controller=%u\n", i);
+ print_lowest_common_dimm_parameters(
+ &pinfo->common_timing_params[i]);
+ printf("\n");
+ }
+ printf("\n");
+ }
+
+ /* STEP 4: User Configuration Options */
+ if (do_mask & STEP_GATHER_OPTS) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+ printf("User Config Options: Controller=%u\n", i);
+ print_memctl_options(&pinfo->memctl_opts[i]);
+ printf("\n");
+ }
+ printf("\n");
+ }
+
+ /* STEP 5: Address assignment */
+ if (do_mask & STEP_ASSIGN_ADDRESSES) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ printf("Address Assignment: Controller=%u "
+ "DIMM=%u\n", i, j);
+ printf("Don't have this functionality yet\n");
+ }
+ printf("\n");
+ }
+ printf("\n");
+ }
+
+ /* STEP 6: computed controller register values */
+ if (do_mask & STEP_COMPUTE_REGS) {
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (!(ctrl_mask & (1 << i)))
+ continue;
+ printf("Computed Register Values: Controller=%u\n", i);
+ print_fsl_memctl_config_regs(
+ &pinfo->fsl_ddr_config_reg[i]);
+ retval = check_fsl_memctl_config_regs(
+ &pinfo->fsl_ddr_config_reg[i]);
+ if (retval) {
+ printf("check_fsl_memctl_config_regs "
+ "result = %u\n", retval);
+ }
+ printf("\n");
+ }
+ printf("\n");
+ }
+}
+
+struct data_strings {
+ const char *data_name;
+ unsigned int step_mask;
+ unsigned int dimm_number_required;
+};
+
+#define DATA_OPTIONS(name, step, dimm) {#name, step, dimm}
+
+unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
+{
+ unsigned long long ddrsize;
+ const char *prompt = "FSL DDR>";
+ unsigned int len;
+ char buffer[CONFIG_SYS_CBSIZE];
+ char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
+ int argc;
+ unsigned int next_step = STEP_GET_SPD;
+ static const struct data_strings options[] = {
+ DATA_OPTIONS(spd, STEP_GET_SPD, 1),
+ DATA_OPTIONS(dimmparms, STEP_COMPUTE_DIMM_PARMS, 1),
+ DATA_OPTIONS(commonparms, STEP_COMPUTE_COMMON_PARMS, 0),
+ DATA_OPTIONS(opts, STEP_GATHER_OPTS, 0),
+ DATA_OPTIONS(addresses, STEP_ASSIGN_ADDRESSES, 0),
+ DATA_OPTIONS(regs, STEP_COMPUTE_REGS, 0),
+ };
+ static const unsigned int n_opts = ARRAY_SIZE(options);
+ const char *usage = {
+ "commands:\n"
+ "print print SPD and intermediate computed data\n"
+ "reset reboot machine\n"
+ "recompute reload SPD and options to default and recompute regs\n"
+ "edit modify spd, parameter, or option\n"
+ "compute recompute registers from current next_step to end\n"
+ "next_step shows current next_step\n"
+ "help this message\n"
+ "go program the memory controller and continue with u-boot\n"
+ };
+
+ /*
+ * The strategy for next_step is that it points to the next
+ * step in the computation process that needs to be done.
+ */
+ while (1) {
+ /*
+ * No need to worry for buffer overflow here in
+ * this function; readline() maxes out at CFG_CBSIZE
+ */
+ len = readline_into_buffer(prompt, buffer);
+ argc = parse_line(buffer, argv);
+ if (argc == 0)
+ continue;
+
+
+ if (strcmp(argv[0], "help") == 0) {
+ puts(usage);
+ continue;
+ }
+
+ if (strcmp(argv[0], "next_step") == 0) {
+ printf("next_step = 0x%02X (%s)\n",
+ next_step,
+ step_to_string(next_step));
+ continue;
+ }
+
+ if (strcmp(argv[0], "edit") == 0) {
+ unsigned int i, j;
+ unsigned int error = 0;
+ unsigned int step_mask = 0;
+ unsigned int ctlr_mask = 0;
+ unsigned int dimm_mask = 0;
+ char *p_element = NULL;
+ char *p_value = NULL;
+ unsigned int dimm_number_required = 0;
+ unsigned int ctrl_num;
+ unsigned int dimm_num;
+ unsigned int matched = 0;
+
+ if (argc == 1) {
+ /* Only the element and value must be last */
+ printf("edit <c#> <d#> "
+ "<spd|dimmparms|commonparms|opts|"
+ "addresses|regs> <element> <value>\n");
+ printf("for spd, specify byte number for "
+ "element\n");
+ continue;
+ }
+
+ for (i = 1; i < argc - 2; i++) {
+ for (j = 0; j < n_opts; j++) {
+ if (strcmp(options[j].data_name,
+ argv[i]) != 0)
+ continue;
+ step_mask |= options[j].step_mask;
+ dimm_number_required =
+ options[j].dimm_number_required;
+ matched = 1;
+ break;
+ }
+
+ if (matched)
+ continue;
+
+ if (argv[i][0] == 'c') {
+ char c = argv[i][1];
+ if (isdigit(c))
+ ctlr_mask |= 1 << (c - '0');
+ continue;
+ }
+
+ if (argv[i][0] == 'd') {
+ char c = argv[i][1];
+ if (isdigit(c))
+ dimm_mask |= 1 << (c - '0');
+ continue;
+ }
+
+ printf("unknown arg %s\n", argv[i]);
+ step_mask = 0;
+ error = 1;
+ break;
+ }
+
+
+ if (error)
+ continue;
+
+
+ /* Check arguments */
+
+ /* ERROR: If no steps were found */
+ if (step_mask == 0) {
+ printf("Error: No valid steps were specified "
+ "in argument.\n");
+ continue;
+ }
+
+ /* ERROR: If multiple steps were found */
+ if (step_mask & (step_mask - 1)) {
+ printf("Error: Multiple steps specified in "
+ "argument.\n");
+ continue;
+ }
+
+ /* ERROR: Controller not specified */
+ if (ctlr_mask == 0) {
+ printf("Error: controller number not "
+ "specified or no element and "
+ "value specified\n");
+ continue;
+ }
+
+ if (ctlr_mask & (ctlr_mask - 1)) {
+ printf("Error: multiple controllers "
+ "specified, %X\n", ctlr_mask);
+ continue;
+ }
+
+ /* ERROR: DIMM number not specified */
+ if (dimm_number_required && dimm_mask == 0) {
+ printf("Error: DIMM number number not "
+ "specified or no element and "
+ "value specified\n");
+ continue;
+ }
+
+ if (dimm_mask & (dimm_mask - 1)) {
+ printf("Error: multipled DIMMs specified\n");
+ continue;
+ }
+
+ p_element = argv[argc - 2];
+ p_value = argv[argc - 1];
+
+ ctrl_num = __ilog2(ctlr_mask);
+ dimm_num = __ilog2(dimm_mask);
+
+ switch (step_mask) {
+ case STEP_GET_SPD:
+ {
+ unsigned int element_num;
+ unsigned int value;
+
+ element_num = simple_strtoul(p_element,
+ NULL, 0);
+ value = simple_strtoul(p_value,
+ NULL, 0);
+ fsl_ddr_spd_edit(pinfo,
+ ctrl_num,
+ dimm_num,
+ element_num,
+ value);
+ next_step = STEP_COMPUTE_DIMM_PARMS;
+ }
+ break;
+
+ case STEP_COMPUTE_DIMM_PARMS:
+ fsl_ddr_dimm_parameters_edit(
+ pinfo, ctrl_num, dimm_num,
+ p_element, p_value);
+ next_step = STEP_COMPUTE_COMMON_PARMS;
+ break;
+
+ case STEP_COMPUTE_COMMON_PARMS:
+ lowest_common_dimm_parameters_edit(pinfo,
+ ctrl_num, p_element, p_value);
+ next_step = STEP_GATHER_OPTS;
+ break;
+
+ case STEP_GATHER_OPTS:
+ fsl_ddr_options_edit(pinfo, ctrl_num,
+ p_element, p_value);
+ next_step = STEP_ASSIGN_ADDRESSES;
+ break;
+
+ case STEP_ASSIGN_ADDRESSES:
+ printf("editing of address assignment "
+ "not yet implemented\n");
+ break;
+
+ case STEP_COMPUTE_REGS:
+ {
+ fsl_ddr_regs_edit(pinfo,
+ ctrl_num,
+ p_element,
+ p_value);
+ next_step = STEP_PROGRAM_REGS;
+ }
+ break;
+
+ default:
+ printf("programming error\n");
+ while (1)
+ ;
+ break;
+ }
+ continue;
+ }
+
+ if (strcmp(argv[0], "reset") == 0) {
+ /*
+ * Reboot machine.
+ * Args don't seem to matter because this
+ * doesn't return
+ */
+ do_reset(NULL, 0, 0, NULL);
+ }
+
+ if (strcmp(argv[0], "recompute") == 0) {
+ /*
+ * Recalculate everything, starting with
+ * loading SPD EEPROM from DIMMs
+ */
+ next_step = STEP_GET_SPD;
+ ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+ continue;
+ }
+
+ if (strcmp(argv[0], "compute") == 0) {
+ /*
+ * Compute rest of steps starting at
+ * the current next_step/
+ */
+ ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+ continue;
+ }
+
+ if (strcmp(argv[0], "print") == 0) {
+ unsigned int i, j;
+ unsigned int error = 0;
+ unsigned int step_mask = 0;
+ unsigned int ctlr_mask = 0;
+ unsigned int dimm_mask = 0;
+ unsigned int matched = 0;
+
+ if (argc == 1) {
+ printf("print [c<n>] [d<n>] [spd] [dimmparms] "
+ "[commonparms] [opts] [addresses] [regs]\n");
+ continue;
+ }
+
+ for (i = 1; i < argc; i++) {
+ for (j = 0; j < n_opts; j++) {
+ if (strcmp(options[j].data_name,
+ argv[i]) != 0)
+ continue;
+ step_mask |= options[j].step_mask;
+ matched = 1;
+ break;
+ }
+
+ if (matched)
+ continue;
+
+ if (argv[i][0] == 'c') {
+ char c = argv[i][1];
+ if (isdigit(c))
+ ctlr_mask |= 1 << (c - '0');
+ continue;
+ }
+
+ if (argv[i][0] == 'd') {
+ char c = argv[i][1];
+ if (isdigit(c))
+ dimm_mask |= 1 << (c - '0');
+ continue;
+ }
+
+ printf("unknown arg %s\n", argv[i]);
+ step_mask = 0;
+ error = 1;
+ break;
+ }
+
+ if (error)
+ continue;
+
+ /* If no particular controller was found, print all */
+ if (ctlr_mask == 0)
+ ctlr_mask = 0xFF;
+
+ /* If no particular dimm was found, print all dimms. */
+ if (dimm_mask == 0)
+ dimm_mask = 0xFF;
+
+ /* If no steps were found, print all steps. */
+ if (step_mask == 0)
+ step_mask = STEP_ALL;
+
+ fsl_ddr_printinfo(pinfo, ctlr_mask,
+ dimm_mask, step_mask);
+ continue;
+ }
+
+ if (strcmp(argv[0], "go") == 0) {
+ if (next_step)
+ ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+ break;
+ }
+
+ printf("unknown command %s\n", argv[0]);
+ }
+
+ debug("end of memory = %llu\n", (u64)ddrsize);
+
+ return ddrsize;
+}
projects / project / bcm63xx / u-boot.git / commitdiff