#define TOE_TX_CSUM_OL 0x00000001
#define TOE_RX_CSUM_OL 0x00000002
-#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
-
-/* size of brcmf_scan_params not including variable length array */
-#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
-
-/* masks for channel and ssid count */
-#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
-#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
-
-/* primary (ie tx) key */
-#define BRCMF_PRIMARY_KEY (1 << 1)
-
/* For supporting multiple interfaces */
#define BRCMF_MAX_IFS 16
-#define DOT11_BSSTYPE_ANY 2
#define DOT11_MAX_DEFAULT_KEYS 4
-#define BRCMF_ESCAN_REQ_VERSION 1
-
-#define WLC_BSS_RSSI_ON_CHANNEL 0x0002
-
-#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
-#define BRCMF_STA_ASSOC 0x10 /* Associated */
-
#define BRCMF_E_STATUS_SUCCESS 0
#define BRCMF_E_STATUS_FAIL 1
#define BRCMF_E_STATUS_TIMEOUT 2
*/
#define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
-/* Pattern matching filter. Specifies an offset within received packets to
- * start matching, the pattern to match, the size of the pattern, and a bitmask
- * that indicates which bits within the pattern should be matched.
- */
-struct brcmf_pkt_filter_pattern_le {
- /*
- * Offset within received packet to start pattern matching.
- * Offset '0' is the first byte of the ethernet header.
- */
- __le32 offset;
- /* Size of the pattern. Bitmask must be the same size.*/
- __le32 size_bytes;
- /*
- * Variable length mask and pattern data. mask starts at offset 0.
- * Pattern immediately follows mask.
- */
- u8 mask_and_pattern[1];
-};
-
-/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
-struct brcmf_pkt_filter_le {
- __le32 id; /* Unique filter id, specified by app. */
- __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
- __le32 negate_match; /* Negate the result of filter matches */
- union { /* Filter definitions */
- struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
- } u;
-};
-
-/* IOVAR "pkt_filter_enable" parameter. */
-struct brcmf_pkt_filter_enable_le {
- __le32 id; /* Unique filter id */
- __le32 enable; /* Enable/disable bool */
-};
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in struct brcmf_scan_results)
- */
-struct brcmf_bss_info_le {
- __le32 version; /* version field */
- __le32 length; /* byte length of data in this record,
- * starting at version and including IEs
- */
- u8 BSSID[ETH_ALEN];
- __le16 beacon_period; /* units are Kusec */
- __le16 capability; /* Capability information */
- u8 SSID_len;
- u8 SSID[32];
- struct {
- __le32 count; /* # rates in this set */
- u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- __le16 chanspec; /* chanspec for bss */
- __le16 atim_window; /* units are Kusec */
- u8 dtim_period; /* DTIM period */
- __le16 RSSI; /* receive signal strength (in dBm) */
- s8 phy_noise; /* noise (in dBm) */
-
- u8 n_cap; /* BSS is 802.11N Capable */
- /* 802.11N BSS Capabilities (based on HT_CAP_*): */
- __le32 nbss_cap;
- u8 ctl_ch; /* 802.11N BSS control channel number */
- __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
- u8 flags; /* flags */
- u8 reserved[3]; /* Reserved for expansion of BSS properties */
- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
-
- __le16 ie_offset; /* offset at which IEs start, from beginning */
- __le32 ie_length; /* byte length of Information Elements */
- __le16 SNR; /* average SNR of during frame reception */
- /* Add new fields here */
- /* variable length Information Elements */
-};
-
-struct brcm_rateset_le {
- /* # rates in this set */
- __le32 count;
- /* rates in 500kbps units w/hi bit set if basic */
- u8 rates[BRCMF_MAXRATES_IN_SET];
-};
-
-struct brcmf_ssid {
- u32 SSID_len;
- unsigned char SSID[32];
-};
-
-struct brcmf_ssid_le {
- __le32 SSID_len;
- unsigned char SSID[32];
-};
-
-struct brcmf_scan_params_le {
- struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
- u8 bssid[ETH_ALEN]; /* default: bcast */
- s8 bss_type; /* default: any,
- * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
- */
- u8 scan_type; /* flags, 0 use default */
- __le32 nprobes; /* -1 use default, number of probes per channel */
- __le32 active_time; /* -1 use default, dwell time per channel for
- * active scanning
- */
- __le32 passive_time; /* -1 use default, dwell time per channel
- * for passive scanning
- */
- __le32 home_time; /* -1 use default, dwell time for the
- * home channel between channel scans
- */
- __le32 channel_num; /* count of channels and ssids that follow
- *
- * low half is count of channels in
- * channel_list, 0 means default (use all
- * available channels)
- *
- * high half is entries in struct brcmf_ssid
- * array that follows channel_list, aligned for
- * s32 (4 bytes) meaning an odd channel count
- * implies a 2-byte pad between end of
- * channel_list and first ssid
- *
- * if ssid count is zero, single ssid in the
- * fixed parameter portion is assumed, otherwise
- * ssid in the fixed portion is ignored
- */
- __le16 channel_list[1]; /* list of chanspecs */
-};
-
-struct brcmf_scan_results {
- u32 buflen;
- u32 version;
- u32 count;
- struct brcmf_bss_info_le bss_info_le[];
-};
-
-struct brcmf_escan_params_le {
- __le32 version;
- __le16 action;
- __le16 sync_id;
- struct brcmf_scan_params_le params_le;
-};
-
-struct brcmf_escan_result_le {
- __le32 buflen;
- __le32 version;
- __le16 sync_id;
- __le16 bss_count;
- struct brcmf_bss_info_le bss_info_le;
-};
-
-#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
- sizeof(struct brcmf_bss_info_le))
-
-/* used for association with a specific BSSID and chanspec list */
-struct brcmf_assoc_params_le {
- /* 00:00:00:00:00:00: broadcast scan */
- u8 bssid[ETH_ALEN];
- /* 0: all available channels, otherwise count of chanspecs in
- * chanspec_list */
- __le32 chanspec_num;
- /* list of chanspecs */
- __le16 chanspec_list[1];
-};
-
-/* used for join with or without a specific bssid and channel list */
-struct brcmf_join_params {
- struct brcmf_ssid_le ssid_le;
- struct brcmf_assoc_params_le params_le;
-};
-
-/* scan params for extended join */
-struct brcmf_join_scan_params_le {
- u8 scan_type; /* 0 use default, active or passive scan */
- __le32 nprobes; /* -1 use default, nr of probes per channel */
- __le32 active_time; /* -1 use default, dwell time per channel for
- * active scanning
- */
- __le32 passive_time; /* -1 use default, dwell time per channel
- * for passive scanning
- */
- __le32 home_time; /* -1 use default, dwell time for the home
- * channel between channel scans
- */
-};
-
-/* extended join params */
-struct brcmf_ext_join_params_le {
- struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */
- struct brcmf_join_scan_params_le scan_le;
- struct brcmf_assoc_params_le assoc_le;
-};
-
-struct brcmf_wsec_key {
- u32 index; /* key index */
- u32 len; /* key length */
- u8 data[WLAN_MAX_KEY_LEN]; /* key data */
- u32 pad_1[18];
- u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
- u32 flags; /* misc flags */
- u32 pad_2[3];
- u32 iv_initialized; /* has IV been initialized already? */
- u32 pad_3;
- /* Rx IV */
- struct {
- u32 hi; /* upper 32 bits of IV */
- u16 lo; /* lower 16 bits of IV */
- } rxiv;
- u32 pad_4[2];
- u8 ea[ETH_ALEN]; /* per station */
-};
-
-/*
- * dongle requires same struct as above but with fields in little endian order
- */
-struct brcmf_wsec_key_le {
- __le32 index; /* key index */
- __le32 len; /* key length */
- u8 data[WLAN_MAX_KEY_LEN]; /* key data */
- __le32 pad_1[18];
- __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
- __le32 flags; /* misc flags */
- __le32 pad_2[3];
- __le32 iv_initialized; /* has IV been initialized already? */
- __le32 pad_3;
- /* Rx IV */
- struct {
- __le32 hi; /* upper 32 bits of IV */
- __le16 lo; /* lower 16 bits of IV */
- } rxiv;
- __le32 pad_4[2];
- u8 ea[ETH_ALEN]; /* per station */
-};
-
-/* Used to get specific STA parameters */
-struct brcmf_scb_val_le {
- __le32 val;
- u8 ea[ETH_ALEN];
-};
-
-/* channel encoding */
-struct brcmf_channel_info_le {
- __le32 hw_channel;
- __le32 target_channel;
- __le32 scan_channel;
-};
-
-struct brcmf_sta_info_le {
- __le16 ver; /* version of this struct */
- __le16 len; /* length in bytes of this structure */
- __le16 cap; /* sta's advertised capabilities */
- __le32 flags; /* flags defined below */
- __le32 idle; /* time since data pkt rx'd from sta */
- u8 ea[ETH_ALEN]; /* Station address */
- __le32 count; /* # rates in this set */
- u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
- /* w/hi bit set if basic */
- __le32 in; /* seconds elapsed since associated */
- __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
- __le32 tx_pkts; /* # of packets transmitted */
- __le32 tx_failures; /* # of packets failed */
- __le32 rx_ucast_pkts; /* # of unicast packets received */
- __le32 rx_mcast_pkts; /* # of multicast packets received */
- __le32 tx_rate; /* Rate of last successful tx frame */
- __le32 rx_rate; /* Rate of last successful rx frame */
- __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
- __le32 rx_decrypt_failures; /* # of packet decrypted failed */
-};
-
-struct brcmf_chanspec_list {
- __le32 count; /* # of entries */
- __le32 element[1]; /* variable length uint32 list */
-};
-
-/*
- * WLC_E_PROBRESP_MSG
- * WLC_E_P2P_PROBREQ_MSG
- * WLC_E_ACTION_FRAME_RX
- */
-struct brcmf_rx_mgmt_data {
- __be16 version;
- __be16 chanspec;
- __be32 rssi;
- __be32 mactime;
- __be32 rate;
-};
-
/* Bus independent dongle command */
struct brcmf_dcmd {
uint cmd; /* common dongle cmd definition */
#include "dhd_bus.h"
#include "dhd_dbg.h"
#include "fwil.h"
+#include "fwil_types.h"
#include "tracepoint.h"
#define PKTFILTER_BUF_SIZE 128
#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004
#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008
+#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
+#define BRCMF_BSS_RSSI_ON_CHANNEL 0x0002
+
+#define BRCMF_STA_ASSOC 0x10 /* Associated */
+
+/* size of brcmf_scan_params not including variable length array */
+#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
+
+/* masks for channel and ssid count */
+#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
+
+/* primary (ie tx) key */
+#define BRCMF_PRIMARY_KEY (1 << 1)
+#define DOT11_BSSTYPE_ANY 2
+#define BRCMF_ESCAN_REQ_VERSION 1
+
+#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
enum brcmf_fil_p2p_if_types {
BRCMF_FIL_P2P_IF_CLIENT,
BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6
};
+/* Pattern matching filter. Specifies an offset within received packets to
+ * start matching, the pattern to match, the size of the pattern, and a bitmask
+ * that indicates which bits within the pattern should be matched.
+ */
+struct brcmf_pkt_filter_pattern_le {
+ /*
+ * Offset within received packet to start pattern matching.
+ * Offset '0' is the first byte of the ethernet header.
+ */
+ __le32 offset;
+ /* Size of the pattern. Bitmask must be the same size.*/
+ __le32 size_bytes;
+ /*
+ * Variable length mask and pattern data. mask starts at offset 0.
+ * Pattern immediately follows mask.
+ */
+ u8 mask_and_pattern[1];
+};
+
+/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
+struct brcmf_pkt_filter_le {
+ __le32 id; /* Unique filter id, specified by app. */
+ __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
+ __le32 negate_match; /* Negate the result of filter matches */
+ union { /* Filter definitions */
+ struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
+ } u;
+};
+
+/* IOVAR "pkt_filter_enable" parameter. */
+struct brcmf_pkt_filter_enable_le {
+ __le32 id; /* Unique filter id */
+ __le32 enable; /* Enable/disable bool */
+};
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in struct brcmf_scan_results)
+ */
+struct brcmf_bss_info_le {
+ __le32 version; /* version field */
+ __le32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ u8 BSSID[ETH_ALEN];
+ __le16 beacon_period; /* units are Kusec */
+ __le16 capability; /* Capability information */
+ u8 SSID_len;
+ u8 SSID[32];
+ struct {
+ __le32 count; /* # rates in this set */
+ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ __le16 chanspec; /* chanspec for bss */
+ __le16 atim_window; /* units are Kusec */
+ u8 dtim_period; /* DTIM period */
+ __le16 RSSI; /* receive signal strength (in dBm) */
+ s8 phy_noise; /* noise (in dBm) */
+
+ u8 n_cap; /* BSS is 802.11N Capable */
+ /* 802.11N BSS Capabilities (based on HT_CAP_*): */
+ __le32 nbss_cap;
+ u8 ctl_ch; /* 802.11N BSS control channel number */
+ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
+ u8 flags; /* flags */
+ u8 reserved[3]; /* Reserved for expansion of BSS properties */
+ u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ __le16 ie_offset; /* offset at which IEs start, from beginning */
+ __le32 ie_length; /* byte length of Information Elements */
+ __le16 SNR; /* average SNR of during frame reception */
+ /* Add new fields here */
+ /* variable length Information Elements */
+};
+
+struct brcm_rateset_le {
+ /* # rates in this set */
+ __le32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[BRCMF_MAXRATES_IN_SET];
+};
+
+struct brcmf_ssid {
+ u32 SSID_len;
+ unsigned char SSID[32];
+};
+
+struct brcmf_ssid_le {
+ __le32 SSID_len;
+ unsigned char SSID[32];
+};
+
+struct brcmf_scan_params_le {
+ struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 scan_type; /* flags, 0 use default */
+ __le32 nprobes; /* -1 use default, number of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the
+ * home channel between channel scans
+ */
+ __le32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in
+ * channel_list, 0 means default (use all
+ * available channels)
+ *
+ * high half is entries in struct brcmf_ssid
+ * array that follows channel_list, aligned for
+ * s32 (4 bytes) meaning an odd channel count
+ * implies a 2-byte pad between end of
+ * channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the
+ * fixed parameter portion is assumed, otherwise
+ * ssid in the fixed portion is ignored
+ */
+ __le16 channel_list[1]; /* list of chanspecs */
+};
+
+struct brcmf_scan_results {
+ u32 buflen;
+ u32 version;
+ u32 count;
+ struct brcmf_bss_info_le bss_info_le[];
+};
+
+struct brcmf_escan_params_le {
+ __le32 version;
+ __le16 action;
+ __le16 sync_id;
+ struct brcmf_scan_params_le params_le;
+};
+
+struct brcmf_escan_result_le {
+ __le32 buflen;
+ __le32 version;
+ __le16 sync_id;
+ __le16 bss_count;
+ struct brcmf_bss_info_le bss_info_le;
+};
+
+#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
+ sizeof(struct brcmf_bss_info_le))
+
+/* used for association with a specific BSSID and chanspec list */
+struct brcmf_assoc_params_le {
+ /* 00:00:00:00:00:00: broadcast scan */
+ u8 bssid[ETH_ALEN];
+ /* 0: all available channels, otherwise count of chanspecs in
+ * chanspec_list */
+ __le32 chanspec_num;
+ /* list of chanspecs */
+ __le16 chanspec_list[1];
+};
+
+/* used for join with or without a specific bssid and channel list */
+struct brcmf_join_params {
+ struct brcmf_ssid_le ssid_le;
+ struct brcmf_assoc_params_le params_le;
+};
+
+/* scan params for extended join */
+struct brcmf_join_scan_params_le {
+ u8 scan_type; /* 0 use default, active or passive scan */
+ __le32 nprobes; /* -1 use default, nr of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the home
+ * channel between channel scans
+ */
+};
+
+/* extended join params */
+struct brcmf_ext_join_params_le {
+ struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */
+ struct brcmf_join_scan_params_le scan_le;
+ struct brcmf_assoc_params_le assoc_le;
+};
+
+struct brcmf_wsec_key {
+ u32 index; /* key index */
+ u32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ u32 pad_1[18];
+ u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ u32 flags; /* misc flags */
+ u32 pad_2[3];
+ u32 iv_initialized; /* has IV been initialized already? */
+ u32 pad_3;
+ /* Rx IV */
+ struct {
+ u32 hi; /* upper 32 bits of IV */
+ u16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ u32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/*
+ * dongle requires same struct as above but with fields in little endian order
+ */
+struct brcmf_wsec_key_le {
+ __le32 index; /* key index */
+ __le32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ __le32 pad_1[18];
+ __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ __le32 flags; /* misc flags */
+ __le32 pad_2[3];
+ __le32 iv_initialized; /* has IV been initialized already? */
+ __le32 pad_3;
+ /* Rx IV */
+ struct {
+ __le32 hi; /* upper 32 bits of IV */
+ __le16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ __le32 pad_4[2];
+ u8 ea[ETH_ALEN]; /* per station */
+};
+
+/* Used to get specific STA parameters */
+struct brcmf_scb_val_le {
+ __le32 val;
+ u8 ea[ETH_ALEN];
+};
+
+/* channel encoding */
+struct brcmf_channel_info_le {
+ __le32 hw_channel;
+ __le32 target_channel;
+ __le32 scan_channel;
+};
+
+struct brcmf_sta_info_le {
+ __le16 ver; /* version of this struct */
+ __le16 len; /* length in bytes of this structure */
+ __le16 cap; /* sta's advertised capabilities */
+ __le32 flags; /* flags defined below */
+ __le32 idle; /* time since data pkt rx'd from sta */
+ u8 ea[ETH_ALEN]; /* Station address */
+ __le32 count; /* # rates in this set */
+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
+ /* w/hi bit set if basic */
+ __le32 in; /* seconds elapsed since associated */
+ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
+ __le32 tx_pkts; /* # of packets transmitted */
+ __le32 tx_failures; /* # of packets failed */
+ __le32 rx_ucast_pkts; /* # of unicast packets received */
+ __le32 rx_mcast_pkts; /* # of multicast packets received */
+ __le32 tx_rate; /* Rate of last successful tx frame */
+ __le32 rx_rate; /* Rate of last successful rx frame */
+ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
+ __le32 rx_decrypt_failures; /* # of packet decrypted failed */
+};
+
+struct brcmf_chanspec_list {
+ __le32 count; /* # of entries */
+ __le32 element[1]; /* variable length uint32 list */
+};
+
+/*
+ * WLC_E_PROBRESP_MSG
+ * WLC_E_P2P_PROBREQ_MSG
+ * WLC_E_ACTION_FRAME_RX
+ */
+struct brcmf_rx_mgmt_data {
+ __be16 version;
+ __be16 chanspec;
+ __be32 rssi;
+ __be32 mactime;
+ __be32 rate;
+};
+
#endif /* FWIL_TYPES_H_ */
ch_bss.band == ch_bss_info_le.band &&
bss_info_le->SSID_len == bss->SSID_len &&
!memcmp(bss_info_le->SSID, bss->SSID, bss_info_le->SSID_len)) {
- if ((bss->flags & WLC_BSS_RSSI_ON_CHANNEL) ==
- (bss_info_le->flags & WLC_BSS_RSSI_ON_CHANNEL)) {
+ if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) ==
+ (bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL)) {
s16 bss_rssi = le16_to_cpu(bss->RSSI);
s16 bss_info_rssi = le16_to_cpu(bss_info_le->RSSI);
*/
if (bss_info_rssi > bss_rssi)
bss->RSSI = bss_info_le->RSSI;
- } else if ((bss->flags & WLC_BSS_RSSI_ON_CHANNEL) &&
- (bss_info_le->flags & WLC_BSS_RSSI_ON_CHANNEL) == 0) {
+ } else if ((bss->flags & BRCMF_BSS_RSSI_ON_CHANNEL) &&
+ (bss_info_le->flags & BRCMF_BSS_RSSI_ON_CHANNEL) == 0) {
/* preserve the on-channel rssi measurement
* if the new measurement is off channel
*/
bss->RSSI = bss_info_le->RSSI;
- bss->flags |= WLC_BSS_RSSI_ON_CHANNEL;
+ bss->flags |= BRCMF_BSS_RSSI_ON_CHANNEL;
}
return 1;
}
projects / openwrt / staging / blogic.git / commitdiff