[POWERPC] efika: add phy-handle property for fec_mpc52xx

The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1add6efdb315065e4b424114944911ddb89a3c0e..5d89a21dd0d69b793989c79d169e6ce6fab60020 100644 (file)
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2216,6 +2216,45 @@ static void __init fixup_device_tree_efika(void)
                        prom_printf("fixup_device_tree_efika: ",
                                "skipped entry %x - setprop error\n", i);
        }
+
+       /* Make sure ethernet mdio bus node exists */
+       node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
+       if (!PHANDLE_VALID(node)) {
+               prom_printf("Adding Ethernet MDIO node\n");
+               call_prom("interpret", 1, 1,
+                       " s\" /builtin\" find-device"
+                       " new-device"
+                               " 1 encode-int s\" #address-cells\" property"
+                               " 0 encode-int s\" #size-cells\" property"
+                               " s\" mdio\" 2dup device-name device-type"
+                               " s\" mpc5200b-fec-phy\" encode-string"
+                               " s\" compatible\" property"
+                               " 0xf0003000 0x400 reg"
+                               " 0x2 encode-int"
+                               " 0x5 encode-int encode+"
+                               " 0x3 encode-int encode+"
+                               " s\" interrupts\" property"
+                       " finish-device");
+       };
+
+       /* Make sure ethernet phy device node exist */
+       node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio/ethernet-phy"));
+       if (!PHANDLE_VALID(node)) {
+               prom_printf("Adding Ethernet PHY node\n");
+               call_prom("interpret", 1, 1,
+                       " s\" /builtin/mdio\" find-device"
+                       " new-device"
+                               " s\" ethernet-phy\" device-name"
+                               " 0x10 encode-int s\" reg\" property"
+                               " my-self"
+                               " ihandle>phandle"
+                       " finish-device"
+                       " s\" /builtin/ethernet\" find-device"
+                               " encode-int"
+                               " s\" phy-handle\" property"
+                       " device-end");
+       }
+
 }
 #else
 #define fixup_device_tree_efika()