This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.
Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
#define HCR p15, 4, c1, c1, 0
#define HCPTR p15, 4, c1, c1, 2
#define CNTHCTL p15, 4, c14, c1, 0
+#define CNTKCTL p15, 0, c14, c1, 0
#define VPIDR p15, 4, c0, c0, 0
#define VMPIDR p15, 4, c0, c0, 5
#define ISR p15, 0, c12, c1, 0
DEFINE_SYSOP_FUNC(sev)
DEFINE_SYSOP_TYPE_FUNC(dsb, sy)
DEFINE_SYSOP_TYPE_FUNC(dmb, sy)
+DEFINE_SYSOP_TYPE_FUNC(dmb, st)
+DEFINE_SYSOP_TYPE_FUNC(dmb, ld)
DEFINE_SYSOP_TYPE_FUNC(dsb, ish)
DEFINE_SYSOP_TYPE_FUNC(dsb, ishst)
DEFINE_SYSOP_TYPE_FUNC(dmb, ish)
#else
/*
- * Empty macros for all other BL stages other than BL31
+ * Empty macros for all other BL stages other than BL31 and BL32
*/
#define ARM_INSTANTIATE_LOCK
#define arm_lock_init()
#endif
#ifdef IMAGE_BL32
const mmap_region_t plat_arm_mmap[] = {
+#ifdef AARCH32
+ ARM_MAP_SHARED_RAM,
+#endif
V2M_MAP_IOFPGA,
CSS_MAP_DEVICE,
SOC_CSS_MAP_DEVICE,
--- /dev/null
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <bl_common.h>
+#include <cortex_a53.h>
+#include <cortex_a57.h>
+#include <cortex_a72.h>
+#include <v2m_def.h>
+#include "../juno_def.h"
+
+
+ .globl plat_reset_handler
+ .globl plat_arm_calc_core_pos
+
+#define JUNO_REVISION(rev) REV_JUNO_R##rev
+#define JUNO_HANDLER(rev) plat_reset_handler_juno_r##rev
+#define JUMP_TO_HANDLER_IF_JUNO_R(revision) \
+ jump_to_handler JUNO_REVISION(revision), JUNO_HANDLER(revision)
+
+ /* --------------------------------------------------------------------
+ * Helper macro to jump to the given handler if the board revision
+ * matches.
+ * Expects the Juno board revision in x0.
+ * --------------------------------------------------------------------
+ */
+ .macro jump_to_handler _revision, _handler
+ cmp r0, #\_revision
+ beq \_handler
+ .endm
+
+ /* --------------------------------------------------------------------
+ * Helper macro that reads the part number of the current CPU and jumps
+ * to the given label if it matches the CPU MIDR provided.
+ *
+ * Clobbers r0.
+ * --------------------------------------------------------------------
+ */
+ .macro jump_if_cpu_midr _cpu_midr, _label
+ ldcopr r0, MIDR
+ ubfx r0, r0, #MIDR_PN_SHIFT, #12
+ ldr r1, =((\_cpu_midr >> MIDR_PN_SHIFT) & MIDR_PN_MASK)
+ cmp r0, r1
+ beq \_label
+ .endm
+
+ /* --------------------------------------------------------------------
+ * Platform reset handler for Juno R0.
+ *
+ * Juno R0 has the following topology:
+ * - Quad core Cortex-A53 processor cluster;
+ * - Dual core Cortex-A57 processor cluster.
+ *
+ * This handler does the following:
+ * - Implement workaround for defect id 831273 by enabling an event
+ * stream every 65536 cycles.
+ * - Set the L2 Data RAM latency to 2 (i.e. 3 cycles) for Cortex-A57
+ * - Set the L2 Tag RAM latency to 2 (i.e. 3 cycles) for Cortex-A57
+ * --------------------------------------------------------------------
+ */
+func JUNO_HANDLER(0)
+ /* --------------------------------------------------------------------
+ * Enable the event stream every 65536 cycles
+ * --------------------------------------------------------------------
+ */
+ mov r0, #(0xf << EVNTI_SHIFT)
+ orr r0, r0, #EVNTEN_BIT
+ stcopr r0, CNTKCTL
+
+ /* --------------------------------------------------------------------
+ * Nothing else to do on Cortex-A53.
+ * --------------------------------------------------------------------
+ */
+ jump_if_cpu_midr CORTEX_A53_MIDR, 1f
+
+ /* --------------------------------------------------------------------
+ * Cortex-A57 specific settings
+ * --------------------------------------------------------------------
+ */
+ mov r0, #((L2_DATA_RAM_LATENCY_3_CYCLES << L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+ (L2_TAG_RAM_LATENCY_3_CYCLES << L2CTLR_TAG_RAM_LATENCY_SHIFT))
+ stcopr r0, L2CTLR
+1:
+ isb
+ bx lr
+endfunc JUNO_HANDLER(0)
+
+ /* --------------------------------------------------------------------
+ * Platform reset handler for Juno R1.
+ *
+ * Juno R1 has the following topology:
+ * - Quad core Cortex-A53 processor cluster;
+ * - Dual core Cortex-A57 processor cluster.
+ *
+ * This handler does the following:
+ * - Set the L2 Data RAM latency to 2 (i.e. 3 cycles) for Cortex-A57
+ *
+ * Note that:
+ * - The default value for the L2 Tag RAM latency for Cortex-A57 is
+ * suitable.
+ * - Defect #831273 doesn't affect Juno R1.
+ * --------------------------------------------------------------------
+ */
+func JUNO_HANDLER(1)
+ /* --------------------------------------------------------------------
+ * Nothing to do on Cortex-A53.
+ * --------------------------------------------------------------------
+ */
+ jump_if_cpu_midr CORTEX_A57_MIDR, A57
+ bx lr
+
+A57:
+ /* --------------------------------------------------------------------
+ * Cortex-A57 specific settings
+ * --------------------------------------------------------------------
+ */
+ mov r0, #(L2_DATA_RAM_LATENCY_3_CYCLES << L2CTLR_DATA_RAM_LATENCY_SHIFT)
+ stcopr r0, L2CTLR
+ isb
+ bx lr
+endfunc JUNO_HANDLER(1)
+
+ /* --------------------------------------------------------------------
+ * Platform reset handler for Juno R2.
+ *
+ * Juno R2 has the following topology:
+ * - Quad core Cortex-A53 processor cluster;
+ * - Dual core Cortex-A72 processor cluster.
+ *
+ * This handler does the following:
+ * - Set the L2 Data RAM latency to 2 (i.e. 3 cycles) for Cortex-A72
+ * - Set the L2 Tag RAM latency to 1 (i.e. 2 cycles) for Cortex-A72
+ *
+ * Note that:
+ * - Defect #831273 doesn't affect Juno R2.
+ * --------------------------------------------------------------------
+ */
+func JUNO_HANDLER(2)
+ /* --------------------------------------------------------------------
+ * Nothing to do on Cortex-A53.
+ * --------------------------------------------------------------------
+ */
+ jump_if_cpu_midr CORTEX_A72_MIDR, A72
+ bx lr
+
+A72:
+ /* --------------------------------------------------------------------
+ * Cortex-A72 specific settings
+ * --------------------------------------------------------------------
+ */
+ mov r0, #((L2_DATA_RAM_LATENCY_3_CYCLES << L2CTLR_DATA_RAM_LATENCY_SHIFT) | \
+ (L2_TAG_RAM_LATENCY_2_CYCLES << L2CTLR_TAG_RAM_LATENCY_SHIFT))
+ stcopr r0, L2CTLR
+ isb
+ bx lr
+endfunc JUNO_HANDLER(2)
+
+ /* --------------------------------------------------------------------
+ * void plat_reset_handler(void);
+ *
+ * Determine the Juno board revision and call the appropriate reset
+ * handler.
+ * --------------------------------------------------------------------
+ */
+func plat_reset_handler
+ /* Read the V2M SYS_ID register */
+ ldr r0, =(V2M_SYSREGS_BASE + V2M_SYS_ID)
+ ldr r1, [r0]
+ /* Extract board revision from the SYS_ID */
+ ubfx r0, r1, #V2M_SYS_ID_REV_SHIFT, #4
+
+ JUMP_TO_HANDLER_IF_JUNO_R(0)
+ JUMP_TO_HANDLER_IF_JUNO_R(1)
+ JUMP_TO_HANDLER_IF_JUNO_R(2)
+
+ /* Board revision is not supported */
+ no_ret plat_panic_handler
+
+endfunc plat_reset_handler
+
+ /* -----------------------------------------------------
+ * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+ * Helper function to calculate the core position.
+ * -----------------------------------------------------
+ */
+func plat_arm_calc_core_pos
+ b css_calc_core_pos_swap_cluster
+endfunc plat_arm_calc_core_pos
#endif
#ifdef IMAGE_BL32
-# define PLAT_ARM_MMAP_ENTRIES 4
-# define MAX_XLAT_TABLES 3
+# define PLAT_ARM_MMAP_ENTRIES 5
+# define MAX_XLAT_TABLES 4
#endif
/*
--- /dev/null
+#
+# Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# Neither the name of ARM nor the names of its contributors may be used
+# to endorse or promote products derived from this software without specific
+# prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+# SP_MIN source files specific to JUNO platform
+BL32_SOURCES += lib/cpus/aarch32/cortex_a53.S \
+ lib/cpus/aarch32/cortex_a57.S \
+ lib/cpus/aarch32/cortex_a72.S \
+ plat/arm/board/juno/juno_pm.c \
+ plat/arm/board/juno/juno_topology.c \
+ plat/arm/css/common/css_pm.c \
+ plat/arm/css/common/css_topology.c \
+ plat/arm/soc/common/soc_css_security.c \
+ plat/arm/css/drivers/scp/css_pm_scpi.c \
+ plat/arm/css/drivers/scpi/css_mhu.c \
+ plat/arm/css/drivers/scpi/css_scpi.c \
+ ${JUNO_GIC_SOURCES} \
+ ${JUNO_INTERCONNECT_SOURCES} \
+ ${JUNO_SECURITY_SOURCES}
+
+include plat/arm/common/sp_min/arm_sp_min.mk
--- /dev/null
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <arch.h>
+#include <asm_macros.S>
+#include <cpu_macros.S>
+#include <css_def.h>
+
+ .weak plat_secondary_cold_boot_setup
+ .weak plat_get_my_entrypoint
+ .globl css_calc_core_pos_swap_cluster
+ .weak plat_is_my_cpu_primary
+
+ /* ---------------------------------------------------------------------
+ * void plat_secondary_cold_boot_setup(void);
+ * In the normal boot flow, cold-booting secondary
+ * CPUs is not yet implemented and they panic.
+ * ---------------------------------------------------------------------
+ */
+func plat_secondary_cold_boot_setup
+ /* TODO: Implement secondary CPU cold boot setup on CSS platforms */
+cb_panic:
+ b cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+ /* ---------------------------------------------------------------------
+ * uintptr_t plat_get_my_entrypoint (void);
+ *
+ * Main job of this routine is to distinguish between a cold and a warm
+ * boot. On CSS platforms, this distinction is based on the contents of
+ * the Trusted Mailbox. It is initialised to zero by the SCP before the
+ * AP cores are released from reset. Therefore, a zero mailbox means
+ * it's a cold reset.
+ *
+ * This functions returns the contents of the mailbox, i.e.:
+ * - 0 for a cold boot;
+ * - the warm boot entrypoint for a warm boot.
+ * ---------------------------------------------------------------------
+ */
+func plat_get_my_entrypoint
+ ldr r0, =PLAT_ARM_TRUSTED_MAILBOX_BASE
+ ldr r0, [r0]
+ bx lr
+endfunc plat_get_my_entrypoint
+
+ /* -----------------------------------------------------------
+ * unsigned int css_calc_core_pos_swap_cluster(u_register_t mpidr)
+ * Utility function to calculate the core position by
+ * swapping the cluster order. This is necessary in order to
+ * match the format of the boot information passed by the SCP
+ * and read in plat_is_my_cpu_primary below.
+ * -----------------------------------------------------------
+ */
+func css_calc_core_pos_swap_cluster
+ and r1, r0, #MPIDR_CPU_MASK
+ and r0, r0, #MPIDR_CLUSTER_MASK
+ eor r0, r0, #(1 << MPIDR_AFFINITY_BITS) // swap cluster order
+ add r0, r1, r0, LSR #6
+ bx lr
+endfunc css_calc_core_pos_swap_cluster
+
+ /* -----------------------------------------------------
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu (applicable ony after a cold boot)
+ * -----------------------------------------------------
+ */
+func plat_is_my_cpu_primary
+ mov r10, lr
+ bl plat_my_core_pos
+ ldr r1, =SCP_BOOT_CFG_ADDR
+ ldr r1, [r1]
+ ubfx r1, r1, #PLAT_CSS_PRIMARY_CPU_SHIFT, \
+ #PLAT_CSS_PRIMARY_CPU_BIT_WIDTH
+ cmp r0, r1
+ moveq r0, #1
+ movne r0, #0
+ bx r10
+endfunc plat_is_my_cpu_primary
-Iinclude/plat/arm/css/common/aarch64
-PLAT_BL_COMMON_SOURCES += plat/arm/css/common/aarch64/css_helpers.S
+PLAT_BL_COMMON_SOURCES += plat/arm/css/common/${ARCH}/css_helpers.S
BL1_SOURCES += plat/arm/css/common/css_bl1_setup.c
projects / project / bcm63xx / atf.git / commitdiff